Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General)"

Library of Congress Subject Areas (5707)
- T Technology (1111)
  - TA Engineering (General). Civil engineering (General) (213)

Group by: Creators | Item Type | Uncontrolled Keywords

5-aminomutase (OAM) 9/11 a Decode-and-Forward (DF) access point acoustic wave propagation activity theory adaptable learning adaptive decision-making adaptive MMSE Adaptive Virtual Relaying MIMO (AV-RMIMO) adenosylcobalamin (AdoCbl adhesive adhesives aerospace manufacturing aging air pollution air-gaps algorithms aluminium production ambiguity function (AF) amphoteric oxide amplifier amplify and forward analysis analysis and design methods anisotropic elasticity annular shear cell annular wall friction tester antenna feeds antenna measurements anti-segmentation system AODV applied load applied mathematics area measurement Arge Bam artefacts artificial neural network AS-System asynchronous transmission auger chemical analysis authentication automotive automotive product development auxetic materials axiomatic design axisymmetrical displacement constraint backlight units BAE systems Bam barrier design beams behaviour design and construction bending bilinear softening curve biological system modeling biomedical engineering blood fluid separation body sensor networks bond strength boundary element method broadband antennas BS 7900 building envelopes building roof buildingEXODUS buildingEXODUS escalator model buildings bulk solids handling burial depth business data processing business performance calculation methods Canton Tower benchmark problem capacity capacity performance capillary CAPP carbon monoxide case based engineering case-based reasoning CDMA networks CDMA wireless networks cellular beams central vertical bar Centre for Numerical Modelling centrifugal tester centrifugal-accelerator erosion tester CFD CFD fire simulation CFD modelling change management channel information chemical durability chiral honeycomb chloride chloride attack chlorides circuit breaker circulation classification cleaning climate change adaptation closed loop supply chains CMAC coal handling coastal structures coenzyme B12)-dependent isomerase cognitive interrogator network (COIN) cognitive radar network collocated variables colour channels comparison of materials compartment fire test complex mode composite laminates composite materials composite sphere model computational fluid dynamics computational mechanics computational solid mechanics computational tools computer architecture computer simulation computer-aided process planning conceptual analysis conceptual design concrete concrete cracking concrete structures concretes condensed model constitutive model constitutive modeling constitutive modelling construction construction materials construction procedures continuous continuous casting continuous improvements continuum modeling control converging sections converging technologies cooperative communication core flow corrosion Corrosion Long-term performance corrosion rate coupling analysis course delivery crack closure crack closure crack shielding crack tip displacement crack tip shielding crack tip stress crack width cracking creep cross-flow filtration crowd crowd formations CSM curing customer-driven customisation cutting conditions cyclic loading cylinders cylindrical concrete cylindrical roof shells d-ornithine 4 damage assessment data mining DCE DCM decode and forward deformation delay effects delay-Doppler resolution delivery methods dematerialisation density dental composites design design challenges design conflict solving design environment design knowledge reuse design methodology design process support design reuse design support detection deterioration deterministic angle clustering differential equation diffusion problem digital image correlation (DIC) directives disassembly disaster Distributed Computing Environment diversity gain double layers drill cuttings DRM drug delivery DSR dual ground ductility dynamic dynamic modal analysis dynamic perturbation method dynamics e-business e-learning EAF earthquake earthquake analysis earthquake damage earthquakes effective properties egress strategy elastic and plastic behaviour elastic modulus elastic waves elasticity elasto-visco plasticity electrical engineering electrodynamic sensors electrohydrodynamic electromagnetic levitation electron-multiplying charge-coupled device (EMCCD) electronic business electronic control unit Electronic Nose electronic unit elevators elliptical random network (ERN) emergency evacuation emotion modelling empirical model enclosure fire end users energy and resource efficiency and effectiveness engineering and management engineering design engineering safety measures Enterprise Architecture Framework enterprise knowledge enterprise resource planning environmental noise barriers EPR erosion testers escalator evacuation evacuation model evacuation modelling evacuation modelling analyses evacuation models evacuation procedures evacuation simulation evolutionary computation evolutionary computing evolutionary optimization evolutionary regression evolutionary techniques excitation ultra wideband (UWB) waveforms experiment experimental and applied mechanics experimental condensed models experimental studies explosion face-to-face meetings facilities management failure failure function fatigue failure FATMAN FEA feature-based model FFM field model field report finite difference method finite element finite element analysis finite element method finite elements finite volume finite volume algorithms fire fire effluent Fire Field Modelling fire safety fires flame flame radicals flame spread models Floe flood forces flow properties flowability fluid dynamics fluid flow fluid mechanics fluidized-beds flux fracture mechanics fractures frame structure friction resistance frictional contact Fukushima full field photoelasticity full scale enclosure fires fuzzy logic gas sensors gas-blast erosion tester gas-blast tester generation Geographical Information Systems geological analysis geometric channel models (GCMs) GIS glass glass transition temperature GPS triangulation granular food granular material gravity ground slab growth rate guidelines Hajj hdrogen cyanide heat capacity meassurement heat preservation HEI helibars Hidden Markov Models (HMM) hierarchical control techniques hierarchical temporal memory high strength concrete high strength concrete beams high temperature electronics high-aspect ratio microfabrication high-rate compression high-rise building high-rise building evacuation higher education institutions hollow microstucture homolytic rupture honeycomb structures horizontal web steel HTE human behaviour human behaviour in fire human factors human factors data human vision models humans IEC 60695-7-50 image processing imaging implants implementation incomplete noisy measurements indexing process induced ventilation induction industrial flow process industrial processes information azimuth-delay spectrum (IADS) information systems design information-theoretic approach injection moulding innovation innovation and research instabilities interface interface crack interfacial reactions interfacial transition zone interior environments intermetallic compounds internal feedback internet interpolation inverted cones iochemical engineering Iran ISO 19700 Jenike wall friction tester junction temperatures just-noticeable difference key parameters key performance indicators KM know-how knowledge management knowledge management knowledge management system knowledge representation knowledge system design land mobile radio cellular system large span large span roof structures large-scale systems Laser Doppler Anemometry laser Doppler velocimetry measurements late-time target response lateral displacement LDA leaching lead LED backlighting devices legacy life cycle lifts linear antenna arrays linearisation liquefaction load-displacement relationship local equivalence ratio local equivalence ratio (LER) localization London London Underground subway loss modulus maintenance maintenance strategy management knowledge MANET manufacturing manufacturing and cost evaluation manufacturing information systems manufacturing processes manufacturing systems map based triangulation mapping marine MARS System masonry arches mass production material material modelling materials materials science mathematical model mathematical modelling mathematical models maximum dry density measured results mechanical behaviour of materials mechanical engineering mechanical properties of materials medical product development meeting capture message authentication code (MAC) metal casting metals casting methods for design of hoppers micro-physical parametrizations microchannel device microfluidic device microfluidics microgravity materials research microwave microwave oven miniaturization MMSE-MUD mobile technology modal analysis modal mass mode shape expansion model updating modeling modelling modelling and simulation morphology-dependent backscatter signature moving interfaces mulation experiments multi-antenna wireless communication multi-component gas mixture measurements multi-disciplinary analysis multi-inter phase slip algorithm multi-phase flow multi-physics multiband antennas multiple tier co-channel interference Multiple-Input Multiple-Output (MIMO) multiuser detection scheme Muskhelishvili mutual information (MI) nanotechnology NDT negative impedance compensation negative Poisson's ratio neural networks new product design new product development new product introduction New York 9/11 NIST cipher block chaining MAC standard noise legislation noise mitigation noise pollution noise signals non-destructive testing non-orthogonality normalized mode shape novel tetrachiral honeycomb NPD nuclear industry nuclear power nuclear reactors numerical analysis numerical modelling numerical models numerical optimisation numerical optimisation techniques numerical solution numerical techniques objects office buildings oil tanks Olympic park Olympics on-line computer control online ontology open-ended applicator operating age operation sequencing operational modal analysis optical arrays optical fiber cables optical fiber networks optical performance optical simulation optically fed phase optimization optimum moisture content organizational learning orthotics outdoor WiFi localization overtopping packaging paper recycling industry parameter estimation participation particle dynamics particle size distribution particle size measurement particle velocity profiles Passive ventilation Pb-free solder pedestrian pedestrian dynamics pedestrian escalator behaviour peer-to-peer periodic boundary conditions permeability evolutionary computing personal area networks personalised health care personalised learning perturbation-theory perturbed force approach phased arrays photocatalytic water oxidation photodiodes photoelastic modelling photoelasticity photogenerated charge carriers piezosensors pin-loaded patches pipejaking process plan do check acts plasma physics plasma-treated hot air solder level (HASL) plastic enclave plasticity plasticity-induced closure Plaxis 3D Tunnel Program PLM Plytron pneumatic conveying systems pneumatic conveyor pneumatically conveyed solids Poisson ratio polymers polynomial regression polypropylene positioning algorithm potential systems powder metallurgy power azimuth-delay spectrum (PADS) power azimuthal spectrum (PAS) power delay spectrum (PDS) predicting prestressed concrete prestressing steel preventing wear principal component analysis (PCA) printed circuit boards (PCBs) printed circuits probability probability theory problem solving process computer control process control process efficiency processing technology product product design process product designers product knowledge analysis product life cycle management product lifecycle management product modelling product planning product service system products and services profit programming and algorithm theory project management courses project management education proof of concept psychological reactions pulse amplifiers radial cracking radio frequency radio over fiber radio propagation randomly distributed arrays ray tracing calculations ray-tracing (RT) real mode real time structural damage assessment real-time systems recycled reflow profile regeneration regularization algorithm regularization methods regulations reinforced reinforced concrete structures reinforcement reinforcement corrosion reinforcing steel remanufacturing and recycling technologies remediation remote antenna units remote location repair and overhaul (MRO) repeatability requirement management requirements management research profile retrofit reuse review rheology Rhie-chow interpolation rice risk risk assessment risk perception risk-cost optimization roads rocks roof engineering roof structures roofs Rossmann domain rubbers salinity sandwich structures Sarajevo scale-up scheduling applications screed sedimentation segregation semi-automatics sequential-hypothesis-testing framework service life service life prediction service model serviceability shear capacities shear connector shear displacement signal to noise ratio (SNR) signal-to-noise ratio (SNR) silos silos bins and bunkers simulation Single Input Single Output (SISO) slope deflection method small hole smart materials SMARTFIRE SMEs social housing software systems soils solder deposit solder die attach solder joint reliability solder paste soldering solders solid gas flows solid particle erosion solid state lighting solid state lighting systems solid state physics SPE spectrum efficiency spreading waveforms stabilisation / solidiﬁcation stability (control theory) standards steel column base steel corrosion steel reinforcement corrosion steel tube stencil printing STEP STEP-NC stiffness stiffness matrix storage modulus strain-rate dependence strategy strength strengthening stress analysis stress intensity factor stress level stress singularity structural component structural dynamics structural engineering structural fire engineering structural function structural health monitoring structures students’ environmental awareness substructure supply chain management surface mount components surface mount packages surface properties of materials surface tension measurement surgical tools sustainability sustainability in manufacturing sustainable construction Swissair symmetric key block ciphers SysML system identification system modelling t-stress teaching and learning technical capacity technical skills technology change terrorism terrorism and architecture theoretical prediction thermal thermal behaviours thermal cycling thermal damage thermal management thermal performance thermal performance of buildings thermal processing thermal properties thermodynamics thick-walled cylinder thickener thickening three dimensional representative volume elements time domain analysis Timoshenko beam theory TinySec security protocol toxicity traffic sign recognition transfer beam column joint transfer efficiency transient absorption spectroscopy transit station trenchless technology triangulation Triz tube furnace turning operations two-hop decentralized wireless relay network (DWRN) ultra wide band (UWB) ultra wideband (UWB) breast imaging ultra wideband technology ultra-wideband radio frequency identification (UWB-RFID) underground concrete pipes underground station uniformly distributed relay nodes universities' environmental management system unsaturated soil unstructured mesh up-link transmissions uprating urban noise UWB personal area networks velocity velocity measurement vertical transport devices vibration vibration measurement vibrations vibroacoustics video viewability virtual enterprise virtual testing/framework viscoelasticity viscosity measurement visibility visual impact VLSI voids and thermal resistance Volterra analysis volumetric behaviour Numerical modelling Voronoi region based approach war water water model water reactor pressure vessels wave propogation web-page wireless sensor networks world heritage site World Trade Center World Trade Centre WTC

Number of items at this level: 213.

5-aminomutase (OAM)

Pang, Jiayun, Li, Xin, Morokuma, Keiji, Scrutton, Nigel S. and Sutcliffe, Michael J. (2012) Large-scale domain conformational change is coupled to the activation of the Co-C bond in the B 12-dependent enzyme ornithine 4,5-aminomutase: a computational study. Journal of the American Chemical Society, 134 (4). pp. 2367-2377. ISSN 0002-7863 (Print), 1520-5126 (Online) (doi:10.1021/ja210417k)

9/11

Galea, E.R., Sharp, G., Lawrence, P.J. and Holden, R. (2008) Approximating the evacuation of the World Trade Center North Tower using computer simulation. Journal of Fire Protection Engineering, 18 (2). pp. 85-115. ISSN 1042-3915 (Print), 1532-172X (Online) (doi:10.1177/1042391507079343)

a Decode-and-Forward (DF)

Kanakis, T., Litchfield, C. and Rapajic, P. (2009) Adaptive virtual relaying MIMO decode and forward. In: Wireless Communications & Signal Processing. Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ, USA, pp. 1-5. ISBN 978-1-4244-5668-0 (electronic), 978-1-4244-4856-2 (print) (doi:10.1109/WCSP.2009.5371515)

access point

Ibrahim, Ahmet and Ibrahim, Dogan (2010) Real-time GPS based outdoor WiFi localization system with map display. Advances in Engineering Software, 41 (9). pp. 1080-1086. ISSN 0965 9978 (online) (doi:10.1016/j.advengsoft.2010.06.005)

acoustic wave propagation

Abramovich, H., Burgard, M., Edery-Azulay, L., Evans, K. E., Hoffmeister, M., Miller, W., Scarpa, F., Smith, C. W., Tee, Kong-Fah, Schönecker, A. and Seffner, L. (2008) Sensing and actuation of smart chiral honeycombs. Proceedings of SPIE, 6935, 693506. ISSN 0277-786X (doi:10.1117/12.775588)

Tee, K.T., Spadoni, A., Scarpa, F. and Ruzzene, M. (2010) Wave propagation in auxetic tetrachiral honeycombs. Journal of Vibration and Acoustics , 132 (3). 031007-031015. ISSN 0739-3717 (doi:10.1115/1.4000785)

activity theory

Macpherson, Allan, Kofinas, Alexander, Jones, Oswald and Thorpe, Richard (2010) Making sense of mediated learning: cases from small firms. Management Learning, 41 (3). pp. 303-323. ISSN 1350-5076 (Print), 1461-7307 (Online) (doi:10.1177/1350507609357002)

adaptable learning

Peter, S.E., Bacon, E. and Dastbaz, M. (2010) Personalised and adaptable learning: designing the architecture. In: "e" Teaching and Learning 2010 Workshop Proceedings. "e" Teaching and Learning 2010 Workshop, pp. 11-15. ISBN 9780955967696

adaptive decision-making

Gwynne, S., Galea, E.R., Lawrence, P.J., Owen, M. and Filippidis, L. (1999) Adaptive decision-making in response to crowd formations in building EXODUS. Journal of Applied Fire Science, 8 (4). pp. 301-325. ISSN 1044-4300 (Paper), 1541-4183 (Online) (doi:10.2190/CMPP-39TC-TNL3-R63Q)

adaptive MMSE

Qureshi, A., Kanakis, T., Litchfield, C. and Rapajic, P. (2010) Adaptive MMSE multiuser detection (A-MMSE-MUD) in asynchronous cooperative CDMA networks. In: SoftCOM 2010 - International Conference on Software, Telecommunications and Computer Networks. IEEE Computer Society, Piscataway, USA, 260 -264. ISBN 9781424486632 (Print), 9789532900040 (Online)

Adaptive Virtual Relaying MIMO (AV-RMIMO)

adenosylcobalamin (AdoCbl

adhesive

Rizvi, M.J., Lu, H., Bailey, C., Chan, Y.C., Lee, M.Y. and Pang, C.H. (2008) Role of bonding time and temperature on the physical properties of coupled anisotropic conductive-nonconductive adhesive film for flip chip on glass technology. Microelectronic Engineering, 85 (1). pp. 238-244. ISSN 0167-9317 (doi:10.1016/j.mee.2007.05.045)

adhesives

Amalu, Emeka H., Ekere, Ndy and Mallik, Sabuj (2011) Evaluation of rheological properties of lead-free solder pastes and their relationship with transfer efficiency during stencil printing process. Materials and Design, 32 (6). pp. 3189-3197. ISSN 0261-3069 (doi:10.1016/j.matdes.2011.02.045)

aerospace manufacturing

Zhu, Haihua, Gao, James, Li, Dongbo and Tang, Dunbing (2012) A Web-based Product Service System for aerospace maintenance, repair and overhaul services. Computers in Industry, 63 (4). pp. 338-348. ISSN 0166-3615 (doi:10.1016/j.compind.2012.02.016)

aging

Rizvi, M.J., Chan, Y.C., Bailey, Christopher, Lu, Hua and Islam, M.N. (2006) Effect of adding 1 wt% Bi into the Sn–2.8Ag–0.5Cu solder alloy on the intermetallic formations with Cu-substrate during soldering and isothermal aging. Journal of Alloys and Compounds, 407 (1-2). pp. 208-214. ISSN 0925-8388 (doi:10.1016/j.jallcom.2005.06.050)

air pollution

Kotzen, Benz and English, Colin (2009) Environmental noise barriers: a guide to their acoustic and visual design. Spon Press / Taylor & Francis, London, UK. ISBN 0-415-43708-3 (hbk), 0-203-93138-6 (ebook)

air-gaps

Xiao, Nan, Chen, Hua Peng, Sun, Liqiang and Wang, Hai (2011) New open-web roofs for integrating heat preservation & insulation and structural functions. In: 2011 International Conference on Multimedia Technology, ICMT 2011. IEEE Computer Society, Piscataway, USA, pp. 1123-1126. ISBN 9781612847719 (doi:10.1109/ICMT.2011.6002873)

algorithms

Bakalis, P.S. and Ellis, J.E. (1995) The use of optimisation algorithms as an aid for determining process control configurations. In: Large Scale Systems: Postprint Volume from the 7th IFAC/IFORS/IMACS Symposium, London, UK, 11-13 July 1995: Theory and Applications, 1995. IPPV IFAC Postprint . Pergamon, pp. 333-338. ISBN 0080423655

Taylor, Gareth Anthony (1996) A vertex based discretisation scheme applied to material non-linearity within a multi-physics finite volume framework. PhD thesis, University of Greenwich.

aluminium production

Dyroy, Are (2006) Quantification and mitigation of segregation in the handling of alumina in aluminium production. PhD thesis, University of Greenwich.

ambiguity function (AF)

Nijsure, Y., Chen, Y., Rapajic, P., Yuen, C., Chew, Y.H. and Qin, T.F. (2010) Information-theoretic algorithm for waveform optimization within ultra wideband cognitive radar network. In: International Conference on Ultra-Wideband (ICUWB). IEEE International Conference on Ultra-Wideband (ICUWB) . IEEE Xplore Digital Library, Nanjing, pp. 1-4. ISBN 978-1-4244-5305-4 (print) ISSN 978-1-4244-5306-1 (online) (doi:10.1109/ICUWB.2010.5616308)

amphoteric oxide

Dyroy, Are (2006) Quantification and mitigation of segregation in the handling of alumina in aluminium production. PhD thesis, University of Greenwich.

amplifier

Ali, M. Tanseer, Wu, Ruiheng, Callaghan, Peter and Rapajic, Predrag (2011) Experimental study of a highly linear amplifier using negative impedance compensation technique. In: Proceedings of the Active RF Devices, Circuits and Systems Seminar. IET Conference Publications . Institution of Engineering and Technology, London, UK, pp. 35-38. ISBN 978-1-84919-540-9 (Online) (Unpublished) (doi:10.1049/ic.2011.0211)

Ali, M.Tanseer, Wu, Ruiheng, Callaghan, Peter and Rapajic, Predrag (2011) Design of a highly linear high frequency amplifier using Volterra model. In: Microwave, Antenna, Propagation, and EMC Technologies for Wireless Communications (MAPE). Microwave, Antenna, Propagation, and EMC Technologies for Wireless Communications (MAPE) . Institute of Electrical and Electronic Engineers, Pistacaway, USA, pp. 355-358. ISBN 978-1-4244-8268-9 (doi:10.1109/MAPE.2011.6156259)

amplify and forward

analysis

Siddiqui, A.A. and Gwynne, S.M.V. (2012) Employing pedestrian observations in engineering analysis. Safety Science, 50 (3). pp. 478-493. ISSN 0925-7535 (doi:10.1016/j.ssci.2011.10.011)

analysis and design methods

Alani, Amir M. and Aboutalebi, Morteza (2012) Analysis of the subgrade stiffness effect on the behaviour of ground-supported concrete slabs. Structural Concrete, 13 (2). pp. 102-108. ISSN 1464-4177 (doi:10.1002/suco.201100043)

anisotropic elasticity

Chen, Hua Peng, Guo, Z. and Zhou, X. (2012) Stress singularities of contact problems with a frictional interface in anisotropic bimaterials. Fatigue & Fracture of Engineering Materials & Structures. ISSN 1460-2695 (In Press) (doi:10.1111/j.1460-2695.2011.01642.x)

annular shear cell

Bradley, Michael S.A. and Berry, Rob (2007) Investigation of the effect of test procedure factors on the failure loci and derived failure functions obtained from annular shear cells. Powder Technology, 174 (1-2). pp. 60-63. ISSN 0032-5910 (doi:10.1016/j.powtec.2006.10.023)

annular wall friction tester

Bradley, Michael S.A., Berry, Rob, Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction tester and test procedure, suitable for equipment design and powder characterisation. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)

antenna feeds

Callaghan, Peter, Gomes, Nathan J., Batchelor, John C. and Formont, Stephane (2009) Experimental investigation of an optically fed phase array for UWB personal area networks. In: International Topical Meeting on Microwave Photonics, 2009. MWP '09. Universidad Politécnica de Valencia, Valencia, Spain. ISBN 978-1-4244-4788-6

antenna measurements

Chen, Yifan, Teo, Jianqi, Lai, Joshua, Gunawan, Erry, Low, Kaysoon, Soh, Cheongboon and Rapajic, Predrag (2008) Cooperative UWB body area networking: channel measurement and diversity analysis. In: 2008 IEEE 10th International symposium on spread spectrum techniques and applications. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc, Piscataway, NJ, USA, pp. 303-308. ISBN 9781424422036 (doi:10.1109/ISSSTA.2008.61)

anti-segmentation system

Dyroy, Are (2006) Quantification and mitigation of segregation in the handling of alumina in aluminium production. PhD thesis, University of Greenwich.

AODV

Bello, Lawal, Bakalis, Panos, Manam, Samuel John and Eneh, Titus (2011) Performance optimisation of mobile ad hoc reactive routing protocols. Advanced Materials Research, 367 . pp. 249-254. ISSN 1662-8985 (Print), 1022-6680 (Online) (doi:10.4028/www.scientific.net/AMR.367.249)

applied load

Li, Chun and Yang, Shangtong (2011) Prediction of concrete crack width under combined reinforcement corrosion and applied load. Journal of Engineering Mechanics, 137. pp. 722-731. ISSN 0733-9399 (print), 1943-7889 (online) (doi:10.1061/(ASCE)EM.1943-7889.0000289)

applied mathematics

Croft, Thomas Nicholas (1998) Unstructured mesh - finite volume algorithms for swirling, turbulent, reacting flows. PhD thesis, University of Greenwich.

Fryer, Yvonne Delia (1993) A control volume unstructured grid approach to the solution of the elastic stress-strain equations. PhD thesis, University of Greenwich.

Hoffmann, Nicole Andrea (1990) Computer simulation of fire-sprinkler interaction. PhD thesis, Thames Polytechnic.

area measurement

Arge Bam

Motamed, J. and Alani, A.M. (2011) Proposal for the retrofit of the world heritage site of Arge Bam after earthquake damage. In: Concrete Solutions 2011. CRC Press/Balkema / Taylor & Francis Group, London, UK, pp. 95-100. ISBN 978-0-415-61622-5 (hbk), 9780203134689 (ebk)

artefacts

artificial neural network

Tao, Mei and Seals, R.C. (1993) Multicomponent gas-mixture measurements using an array of gas sensors and an artificial neural-network. Journal of Microcomputer Applications, 16 (2). pp. 203-210. (doi:10.1006/jmca.1993.1018)

AS-System

Dyroy, Are (2006) Quantification and mitigation of segregation in the handling of alumina in aluminium production. PhD thesis, University of Greenwich.

asynchronous transmission

auger chemical analysis

Takyi, G. and Ekere, N.N. (2010) Investigation of the effect of nitrogen and air atmospheres on solder wettability of plasma-treated HASL finish PCBs. Soldering and Surface Mount Technology, 22 (3). pp. 17-21. ISSN 0954 0911 (doi:10.1108/09540911011054154)

authentication

Carter, R.M., Yan, Y. and Tomlins, Keith (2006) Digital imaging based classification and authentication of granular food products. Measurement Science and Technology, 17 (2). pp. 235-240. ISSN 0957-0233 (doi:10.1088/0957-0233/17/2/002)

automotive

Otiaba, K.C., Ekere, N.N., Bhatti, R.S., Mallik, S., Alam, M.O. and Amalu, E.H. (2011) Thermal interface materials for automotive electronic control unit: Trends, technology and R&D challenges. Microelectronics Reliability, 51 (12). pp. 2031-2043. ISSN 0026-2714 (doi:10.1016/j.microrel.2011.05.001)

automotive product development

Zhang, Pengcheng, Gao, James and Wang, Yinglin (2011) Requirement driven knowledge management system design to support automotive product development. International Journal of Product Lifecycle Management (IJPLM), 5 (2-4). pp. 202-223. ISSN 1743-5110 (doi:10.1504/IJPLM.2011.043188)

auxetic materials

Javadi, Akbar A., Faramarzi, Asaad and Farmanai, Raziyeh (2012) Design and optimization of microstructure of auxetic materials. Engineering Computations, 29 (3). pp. 260-276. ISSN 0264-4401 (doi:10.1108/02644401211212398)

axiomatic design

Gao, James, Fei, Genyuan and Tang, X.Q. (2009) A TRIZ based methodology for the analysis of the coupling problems in complex engineering design. In: Proceedings of the 19th CIRP Design Conference – Competitive Design, 30-31 March 2009. Cranfield University Press, Cranfield University, pp. 285-292. ISBN 9780955743641

axisymmetrical displacement constraint

Chen, Hua Peng and Xiao, Nan (2012) Analytical solutions for corrosion-induced cohesive concrete cracking. Journal of Applied Mathematics, 25. pp. 2-25. ISSN 1110-757X (doi:10.1155/2012/769132)

backlight units

Bailey, C., Yin, C., Lu, H. and Cartwright, C. (2011) Multi-physics and multi-disciplinary analysis for solid state lighting. In: 2011 12th Int. Conf. on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2011. IEEE Computer Society, Piscataway, USA. ISBN 9781457701078 (doi:10.1109/ESIME.2011.5765859)

BAE systems

Piorkowski, B.A., Evans, R.D. and Gao, J.X. (2011) Development of a face-to-face meeting capture and indexing process. In: Proceedings of the 2011 15th International Conference on Computer Supported Cooperative Work in Design, CSCWD2011. IEEE Computer Society, Piscataway, NJ, USA, pp. 4-8. ISBN 9781457703867 (doi:10.1109/CSCWD.2011.5960047)

Bam

Motamed, Jubin (2005) The Bam earthquake of 26 December 2003, Iran. Other. Institution of Structural Engineers / Earthquake Engineering Field Investigation Team (EEFIT) [website], London, UK.

barrier design

beams

Melchers, Robert E., Li, Chun-Qing and Lawanwisut, Wimon (2008) Probabilistic modeling of structural deterioration of reinforced concrete beams under saline environment corrosion. Structural Safety, 30 (5). pp. 447-460. ISSN 0167-4730 (doi:10.1016/j.strusafe.2007.02.002)

behaviour design and construction

bending

bilinear softening curve

Chen, Hua Peng and Xiao, Nan (2012) Analytical solutions for corrosion-induced cohesive concrete cracking. Journal of Applied Mathematics, 25. pp. 2-25. ISSN 1110-757X (doi:10.1155/2012/769132)

biological system modeling

biomedical engineering

Versluis, Antheunis (1994) Origin and development of internal stresses during polymerization of composite resins. PhD thesis, University of Greenwich.

blood fluid separation

Xue, Xiangdong, Patel, Mayur, Kersaudy-Kerhoas, Maïwenn, Bailey, Christopher and Desmulliez, Marc P.Y. (2011) Modelling and simulation of the behaviour of a biofluid in a microchannel biochip separator. Computer Methods in Biomechanics and Biomedical Engineering, 14 (6). pp. 549-560. ISSN 1025-5842 (Print), 1476-8259 (Online) (doi:10.1080/10255842.2010.485570)

body sensor networks

bond strength

Masroor, Ahmad (1983) Bond strength history in prestressed concrete reactor vessels. PhD thesis, Thames Polytechnic.

boundary element method

Davies, A.J., Crann, Diane, Kane, S.J. and Lai, Choi-Hong (2007) A hybrid Laplace transform/finite difference boundary element method for diffusion problems. Computer Modelling in Engineering and Sciences, 18 (2). pp. 79-86. ISSN 1526-1492

broadband antennas

BS 7900

Mahalingam, A., Jia, F., Wang, Z., Patel, M.K. and Galea, E.R. (2012) Numerical investigation of tube furnace toxicity measurement method (ISO 19700). Fire and Materials, 36 (1). pp. 17-30. ISSN 1099-1018 (doi:10.1002/fam.1079)

building envelopes

Xiao, Nan, Chen, Hua Peng, Sun, Liqiang and Wang, Xiang (2011) Experimental study on thermal performance of improved open-web roofs with induced ventilation. In: 2011 International Conference on Multimedia Technology, ICMT 2011. IEEE Computer Society, Piscataway, USA, 6398 -6401. ISBN 9781612847719 (doi:10.1109/ICMT.2011.6002740)

building roof

buildingEXODUS

Kinsey, Michael J., Galea, Edwin R. and Lawrence, Peter (2009) Investigating the use of elevators for high-rise building evacuation through computer simulation. In: 4th International Symposium on Human Behaviour in Fire 2009: Conference Proceedings. Interscience Communications Ltd., London, UK, pp. 85-96. ISBN 978-0-9556548-3-1

buildingEXODUS escalator model

Kinsey, Michael J., Galea, Edwin R. and Lawrence, Peter (2009) Extended model of pedestrian escalator behaviour based on data collected within a Chinese underground station. In: 4th International Symposium on Human Behaviour in Fire 2009: Conference Proceedings. Interscience Communications Ltd, London, UK, pp. 173-182. ISBN 978-0-9556548-3-1

buildings

Chen, Hua-Peng and Bicanic, Nenad (2010) Identification of structural damage in buildings using iterative procedure and regularisation method. Engineering Computations, 27 (8). pp. 930-950. ISSN 0264-4401 (doi:10.1108/02644401011082962)

bulk solids handling

burial depth

Aboutalebi, M., Banan, M.R. and Banan, M.R. (2010) Parametric study on the effect of burial depth on the surface explosion resistance of cylindrical concrete oil tanks. International Journal of Physical Sciences, 5 (1). 030-038. ISSN 1992-1950

business data processing

Fallah, Nosrat Allah (2000) Computational stress analysis using finite volume methods. PhD thesis, University of Greenwich.

business performance

calculation methods

Fallah, Nosrat Allah (2000) Computational stress analysis using finite volume methods. PhD thesis, University of Greenwich.

Canton Tower benchmark problem

Chen, Hua-Peng and Huang, Tian-Li (2012) Updating finite element model using dynamic perturbation method and regularization algorithm. Smart Structures and Systems, 10 (4). pp. 427-442. ISSN 1738-1584

capacity

capacity performance

capillary

Chen, H., Yu, W., Cargill, S., Patel, M.K., Bailey, C., Tonry, C. and Desmulliez, M.P.Y. (2012) Self-encapsulated hollow microstructures formed by electric field-assisted capillarity. Microfluidics and Nanofluidics, 13 (1). pp. 75-82. ISSN 1613-4982 (Print), 1613-4990 (Online) (doi:10.1007/s10404-012-0942-6)

CAPP

Mwinkuka, T., Hinduja, S. and Owodunni, Oladele (2007) Extendible operation sequencing for turn-milled components. CIRP Annals - Manufacturing Technology, 56 (1). pp. 473-478. ISSN 0007-8506 (doi:10.10.1016/j.cirp.2007.05.113)

carbon monoxide

Wang, Z., Jia, F., Galea, E.R. and Patel, M.K. (2011) Predicting toxic gas concentrations at locations remote from the fire source. Fire and Materials, 35 (7). pp. 505-526. ISSN 0308-0501 (Print), 1099-1018 (Online) (doi:10.1002/fam.1069)

case based engineering

Woon, Fei Ling, Knight, Brian, Petridis, Miltos and Patel, Mayur (2005) CBE-conveyor: a case-based reasoning system to assist engineers in designing conveyor systems. In: Case-based reasoning research and development. Lecture Notes In Computer Science, 3620 . Springer-Verlag, Berlin, pp. 640-651. ISBN 9783540281740 (doi:10.1007/11536406_48)

case-based reasoning

Knight, B., Woon, F.L., Patel, M.K. and Petridis, M. (2006) CBR-conveyor: Solving the inverse and constraint problems to assist the design of pneumatic conveyors. In: Proceedings of the 5th International Conference on Engineering Computational Technology. Civil-Comp Press, Stirlingshire, UK. ISSN 1759-3433 (doi:10.4203/ccp.84.129)

CDMA networks

CDMA wireless networks

cellular beams

Goodfellow, N., Nadjai, A., Tee, Kong-Fah, Ali, F. and Choi, S.K (2009) Fire composite floor cellular steel beams for buildings. In: The International Conference on Applications of Structural Fire Engineering, 19-20 February 19-20 2009, Prague, Czech Republic.

Nadjai, Ali, Goodfellow, Nathan, Tee, Kong-Fah, Ali , Faris and Choi, Sengkwan (2010) Analysis of composite floor cellular steel beams. Journal of Structural Fire Engineering. pp. 161-175. ISSN 2040-2317 (Submitted) (doi:10.1260/2040-2317.1.3.161)

central vertical bar

Motamed, Jubin and Al-Hussaini, Abbas (2009) Influence of central vertical bar on the behaviour of high strength concrete transfer beam-column joints. In: The Third International Conference on Concrete and Development. Building and Housing Research Center, Tehran, Iran, pp. 485-496. (doi:CD02-026)

Centre for Numerical Modelling

Pericleous, Kyriacos (2011) Computational science and the future. Public Service Review: UK Science and Technology, 4. pp. 26-27. ISSN 2046-5696 (Online) 2045-3884 (Print)

centrifugal tester

Deng, Tong, Bingley, Mark S. and Bradley, Mike S.A. (2009) Understanding particle dynamics in erosion testers: a review of influences of particle movement on erosion test conditions. Wear, 267 (11). pp. 2132-2140. ISSN 0043-1648 (doi:10.1016/j.wear.2009.02.020)

centrifugal-accelerator erosion tester

Deng, T., Bingley, M.S., Bradley, M.S.A. and De Silva, S.R. (2008) A comparison of the gas-blast and centrifugal-accelerator erosion testers: the influence of particle dynamics. Wear, 265 (7-8). pp. 945-955. ISSN 0043-1648 (doi:10.1016/j.wear.2008.02.017)

CFD

Ewer, John, Galea, Edwin R., Patel, Mayur, Jia, Fuchen, Grandison, Angus and Wang, Zhaozhi (2010) SMARTFIRE - the fire field modelling environment. In: Proceedings of the V European Conference on Computational Fluid Dynamics ECCOMAS CFD 2010. European Community of Computational Methods in Applied Sciences (ECCOMAS), Barcelona, Spain. ISBN 978-989-96778-1-4

Fallah, Nosrat Allah (2000) Computational stress analysis using finite volume methods. PhD thesis, University of Greenwich.

Jalili, Vahid (2004) Application of CFD in designing a drug delivery mixing chamber: an experimental and computational study. PhD thesis, University of Greenwich.

CFD fire simulation

Jia, F., Patel, M.K., Galea, E.R., Grandison, A. and Ewer, J. (2006) CFD fire simulation of the Swissair flight 111 in-flight fire - part II: fire spread analysis. The Aeronautical Journal of the Royal Aeronautical Society, 110 (1107):3069. pp. 303-314. ISSN 0001-9240

CFD modelling

Patel, M.K., Pericleous, K. and Cross, M. (1993) Numerical modelling of circulating fluidized beds. International Journal of Computational Fluid Dynamics, 1 (2). pp. 161-176. ISSN 1061-8562 (Print), 1029-0257 (Online) (doi:10.1080/10618569308904470)

change management

Fei, Genyuan (2011) A methodology for engineering design change analysis using system modelling and knowledge management technologies. PhD thesis, University of Greenwich.

Fei, Genyuan, Gao, James, Owodunni, Oladele and Tang, X. Q. (2009) A methodology for engineering design change management using modelling and problem solving techniques. In: Proceedings of the 36th International MATADOR Conference. Springer, US, pp. 179-182. ISBN 978-1-84996-432-6_41 (doi:10.1007/978-1-84996-432-6_41)

Fei, Genyuan, Gao, James, Owodunni, Oladele and Tang, Xiaoqing (2011) A method for engineering design change analysis using system modelling and knowledge management techniques. International Journal of Computer Integrated Manufacturing, 24 (6). pp. 535-551. ISSN 1362-3052 (electronic), 0951-192X (paper) (doi:10.1080/0951192X.2011.562544)

channel information

chemical durability

John, U.E., Jefferson, I., Boardman, D.I., Ghataora, G.S. and Hills, C.D. (2011) Leaching evaluation of cement stabilisation / solidification treated kaolin clay. Engineering Geology, 123 (4). pp. 315-323. ISSN 0013-7952 (online) (doi:10.1016/j.enggeo.2011.09.004)

chiral honeycomb

chloride

Li, Chun-Qing and Melchers , Robert E. (2009) Reinforcement corrosion initiation and activation times in concrete structures exposed to severe marine environments. Cement and Concrete Research, 39 (11). pp. 1068-1076. ISSN ISSN: 0008-8846 (doi:10.1016/j.cemconres.2009.07.003)

chloride attack

Li, Fumin, Yuan, Yingshu and Li, Chun-Qing (2011) Corrosion propagation of prestressing steel strands in concrete subject to chloride attack. Construction and Building Materials, 25 (10). pp. 3878-3885. ISSN 0950-0618 (doi:10.1016/j.conbuildmat.2011.04.011)

chlorides

Melchers, R.E. and Li, C.Q. (2009) Reinforcement corrosion in concrete exposed to the North Sea for more than 60 years. CORROSION : The Journal of Science and Engineering, 65 (8). pp. 554-566. ISSN 0010-9312 (print) (doi:10.5006/1.3319158)

circuit breaker

Gandhi Jeyaraj, S. and Habtay, Yehdego (2011) Effective and efficient circuit breaker analysis. IET 2011 Conference on Reliability of Transmission and Distribution Networks (RTDN 2011). pp. 1-6. (doi:10.1049/cp.2011.0532)

circulation

Gwynne, Steve (2008) Helping people on their own terms: developing inclusive emergency procedures. Fire Technology, 44 (4). pp. 439-461. ISSN 0015-2684 (doi:10.1007/s10694-007-0039-z)

classification

cleaning

Takyi, G. and Ekere, N.N. (2010) Study of the effects of PCB surface finish on plasma process time for lead-free wave soldering. Soldering & Surface Mount Technology, 22 (2). pp. 37-42. ISSN 0954-0911 (doi:10.1108/09540911011036271)

climate change adaptation

Desai, Apeksha and Jones, Keith (2012) Facilities managers' attitudes towards adaptation and mitigation. In: Proceedings of CIB W070,W092 and TG 72 International Conference: Delivering Value to The Community. Department of Construction Economics and Management, University of Cape Town, Cape Town, South Africa, pp. 410-415. ISBN 978-0-620-50759-2

closed loop supply chains

Piorkowski, Barry, Gao, James and Evans, Richard (2011) A case-study: finding references to product development knowledge from analysis of face-to-face meetings. In: Glocalized Solutions for Sustainability in Manufacturing Proceedings of the 18th CIRP International Conference on Life Cycle Engineering. Springer, New York, USA, pp. 564-569. ISBN 978-3642196911 (doi:10.1007/978-3-642-19692-8-98)

CMAC

Adekunle, A.A. and Woodhead, S.R. (2010) Zone based systems design framework for the realisation of efficient block cipher based message authentication code algorithms. In: 5th International Conference on Availability, Reliability, and Security, ARES 2010. IEEE Xplore Digital Library, Piscataway, NJ, USA, pp. 216-221. ISBN 978-1-4244-5879-0 (doi:10.1109/ARES.2010.109)

coal handling

Bradley, Michael S.A., Berry, Rob and Pillai, John (2007) Comparison between the angles of wall friction measured on an on-line wall friction tester and the Jenike wall friction tester. Powder Technology, 174 (1-2). pp. 64-70. ISSN 0032-5910 (doi:10.1016/j.powtec.2006.10.024)

coastal structures

Li, C.Q. and Zhao, J. M. (2010) Time dependent risk assessment of combined overtopping and structural failure for reinforced concrete coastal structures. Journal of Waterway, Port, Coastal, and Ocean Engineering, 136 (2). pp. 97-103. ISSN 0733-950X (print), 1943-5460 (online) (doi:10.1061/(ASCE)WW.1943-5460.0000031)

coenzyme B12)-dependent isomerase

cognitive interrogator network (COIN)

Chen, Y. and Rapajic, P. (2010) Ultra-wideband cognitive interrogator network: Adaptive illumination with active sensors for target localisation. Communications, IET, 4 (5). pp. 573-584. ISSN 1751 8628 (doi:10.1049/iet-com.2009.0495)

cognitive radar network

collocated variables

Croft, Thomas Nicholas (1998) Unstructured mesh - finite volume algorithms for swirling, turbulent, reacting flows. PhD thesis, University of Greenwich.

colour channels

Melis, W.J.C. and Kameyama, M. (2010) A study of the different uses of colour channels for traffic sign recognition on hierarchical temporal memory. In: Innovative Computing, Information and Control (ICICIC), 2009 Fourth International Conference on. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 111-114. ISBN 978-1-4244-5543-0 (doi:10.1109/ICICIC.2009.55)

comparison of materials

compartment fire test

Markatos, N.C. and Pericleous, K.A. (1984) Une recherche des incendies tridimensionnels dans des compartiments / An investigation of three-dimensional fires in enclosures. Revue générale de thermique , 23 (266). pp. 67-78. ISSN 0035-3159

complex mode

Wang, Tong, Zhang, Lingmi and Tee, Kong Fah (2011) Extraction of real modes and physical matrices from modal testing. Earthquake Engineering and Engineering Vibration, 10 (2). pp. 219-227. ISSN 1993-503X (online) (doi:10.1007/s11803-011-0060-6)

composite laminates

composite materials

Versluis, Antheunis (1994) Origin and development of internal stresses during polymerization of composite resins. PhD thesis, University of Greenwich.

composite sphere model

Li, Chun-Qing and Zheng, Jian Jun (2007) Closed-form solution for predicting elastic modulus of concrete. ACI Materials Journal, 104 (5). pp. 539-546. ISSN 0889-325X

computational fluid dynamics

Chow, P., Cross, Mark and Pericleous, Koulis A. (1996) A natural extension of the conventional finite volume method into polygonal unstructured meshes for CFD application. Applied Mathematical Modelling, 20 (2). pp. 170-183. ISSN 0307-904X (doi:10.1016/0307-904X(95)00156-E)

Jalili, Vahid (2004) Application of CFD in designing a drug delivery mixing chamber: an experimental and computational study. PhD thesis, University of Greenwich.

computational mechanics

Cross, Mark (1996) Modelling of industrial multi-physics processes—a key role for computational mechanics. IMA Journal of Mathematics for Business and Industry, 7 (1). pp. 3-21. ISSN 0953-0061 (doi:10.1093/imaman/7.1.3-a)

computational solid mechanics

Taylor, Gareth Anthony (1996) A vertex based discretisation scheme applied to material non-linearity within a multi-physics finite volume framework. PhD thesis, University of Greenwich.

computational tools

Edussuriya, Suchitra Samanthi (2003) Computational analysis of viscoelastic free surface flows. PhD thesis, University of Greenwich.

computer architecture

Melis, W.J.C., Chizuwa, S. and Kameyama, M. (2009) Evaluation of the hierarchical temporal memory soft computing platform and its VLSI architecture. In: Multiple-Valued Logic, 2009. ISMVL '09. 39th International Symposium on. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 233-238. ISBN 978-1-4244-3841-9 ISSN 0195-623X (doi:10.1109/ISMVL.2009.11)

computer simulation

computer-aided process planning

Gao, James and Sharma , R. (2007) A knowledge-based manufacturing and cost evaluation system for product design/re-design. The International Journal of Advanced Manufacturing Technology, 33 (9-10). pp. 856-865. ISSN 0268-3768 (doi:10.1007/s00170-006-0530-6)

conceptual analysis

conceptual design

concrete

Alani, A., MacMullen, J., Telik, O. and Zhang, Z.Y. (2012) Investigation into the thermal performance of recycled glass screed for construction purposes. Construction and Building Materials, 29. pp. 527-532. ISSN 0950-0618 (doi:10.1016/j.conbuildmat.2011.07.020)

Li, Chun-Qing, Melchers, Robert E., Davidson, Mark and Yang, Shangtong (2008) Condition assessment of a 63-year old reinforced concrete structure exposed to the North Sea. In: Conference on Durability of Building Materials and Components (11DBMC) "Globality and Locality in Durability", 11-14 May 2008, Istanbul, Turkey. (Unpublished)

Melchers, R.E. and Li, C.Q. (2010) Predicting the life of reinforced concrete structures in severe marine environments. In: Bridge maintenance, safety, management and life-cycle optimization: Proceedings of the Fifth International conference on bridge maintenance, safety and management, Philadelphia, Pennsylvania, USA, 11-15 July 2010. Proceedings of the 5th International IABMAS Conference, 2010 (5). CRC Press, Leiden, The Netherlands, p. 314. ISBN 978-0-415-87786-2 (print), 978-0-415-89137-0 (ebook)

Tee, K.F. and Li, C.Q. (2011) A numerical study of maintenance strategy for concrete structures in marine environment. In: Applications of Statistics and Probability in Civil Engineering - Proceedings of the 11th International Conference on Applications of Statistics and Probability in Civil Engineering. The International Conference on Application of Statistics and Probability in Civil Engineering (ICASP) (11). CRC Press, London, UK, pp. 181-183. ISBN 978-0-415-66986-3 (Hardback), 978-0-203-14479-4 (eBook)

concrete cracking

Yang, Shangtong (2010) Concrete crack width under combined reinforcement corrosion and applied load. PhD thesis, University of Greenwich.

concrete structures

Yang, Shangtong and Li, Chun-Qing (2011) Numerical prediction for corrosion-induced concrete crack width. Proceedings of Institution of Civil Engineers: Construction Materials, 164 (6). pp. 293-303. ISSN 1747-650X (print), 1747-6518 (online) (doi:10.1680/coma.1000046)

concretes

Ahangar-Asr, Alireza, Faramarzi, Asaad, Javadi, Akbar A. and Giustolisi, Orazio (2011) Modelling mechanical behaviour of rubber concrete using evolutionary polynomial regression. Engineering Computations, 28 (4). pp. 492-507. ISSN 0264-4401 (doi:10.1108/02644401111131902)

condensed model

Tee, K.F., Koh, C.G. and Quek, S.T. (2009) Numerical and experimental studies of a substructural identification strategy. Structural Health Monitoring, 8 (5). pp. 397-410. ISSN 1475-9217 (doi:10.1177/1475921709102089)

constitutive model

Faramarzi, Asaad, Javadi, Akbar and Ahangar-Asr, Alireza (2013) Numerical implementation of EPR-based material models in finite element analysis. Computers and Structures, 118. pp. 100-108. ISSN 0045-7949 (doi:10.1016/j.compstruc.2012.10.002)

constitutive modeling

Javadi, Akbar A., Ahangar-Asr, Alireza, Faramarzi, Asaad and Mottaghifard, Nasim (2012) An EPR approach to the modeling of civil and geotechnical engineering systems. In: Metaheuristics in Water, Geotechnical and Transport Engineering. Elsevier Inc., Waltham, MA, USA, pp. 311-326. ISBN 978-0-12-398296-4 (doi:10.1016/B978-0-12-398296-4.00013-1)

Javadi, Akbar A., Mehravar, Moura, Faramarzi, Asaad and Ahangar-Asr, Alireza (2009) An artificial intelligence based finite element method. ISAST Transactions on Computers and Intelligent Systems, 1 (2). pp. 1-7. ISSN 1798-2448

constitutive modelling

Javadi, Akbar A., Faramarzi, Asaad and Alani, Amir (2012) Intelligent computational solutions for constitutive modelling of materials in finite element analysis. In: ACME2012: Proceedings of the 20th UK National Conference of the Association for Computational Mechanics in Engineering. The University of Manchester, Manchester, UK, pp. 321-324. ISBN 978-0-903808-06-4

construction

Schneider, Mycle, Froggatt, Antony and Thomas, Stephen (2011) 2010-2011 world nuclear industry status report. Bulletin of the Atomic Scientists, 67 (4). pp. 60-77. ISSN 0096-3402 (print), 1938-3282 (eISSN) (doi:10.1177/0096340211413539)

construction materials

Melchers, R.E., Li, C.Q. and Davison, M.A. (2009) Observations and analysis of a 63-year-old reinforced concrete promenade railing exposed to the North Sea. Magazine of Concrete Research, 61 (4). pp. 233-243. ISSN 0024-9831 (doi:10.1680/macr.2007.00093)

construction procedures

continuous

Robinson, J.P., Kingman, S.W., Snape, C.E., Bradshaw, S.M., Bradley, M.S.A., Shang, H. and Barranco, R. (2010) Scale-up and design of a continuous microwave treatment system for the processing of oil-contaminated drill cuttings. Chemical Engineering Research and Design, 88 (2). pp. 146-154. ISSN 0263-8762 (doi:10.1016/j.cherd.2009.07.011)

continuous casting

Kountouriotis, Z., Pericleous, K., Djambazov, G., Domgin, J.F. and Gardin, P. (2011) Experimental and numerical investigation of the transient meniscus behaviour in a continuous caster. In: 7th European Conference on Continuous Casting (ECCC 2011) , 27 June - 1st July 2011, Dusseldorf, Germany. (Unpublished)

continuous improvements

continuum modeling

Christakis, Nicholas, Chapelle, Pierre, Strusevitch, Nadia, Bridle, Ian, Baxter, John, Patel, Mayur, Cross, Mark, Tüzün, Ugur, Reed, Alan R. and Bradley, Michael S.A. (2006) A hybrid numerical model for predicting segregation during core flow discharge. Advanced Powder Technology, 17 (6). pp. 641-662. ISSN 0921-8831 (doi:10.1163/156855206778917715)

control

Chen, Hua-Peng, Wang , K.L. and Tee, Kong-Fah (2010) Structural health monitoring utilizing dynamic perturbation method. In: 3rd International Conference on Dynamics, Vibration and Control (ICDVC), 12-14 May 2010, Hangzhou, China.

converging sections

Ariza-Zafra, K., Berry, R., Bradley, M.S.A. and Santana, J.C. (2010) Achieving mass flow in silos with shallow converging sections using inverted cones. Bulk Solids Handling (Whitepaper). ISSN 0173-9980

converging technologies

Nielsen, D., White, A.S. and Zhou, L. (2011) The VLE as the converging platform. In: Proceedings of the 2011 International Conference on Electrical Engineering and Informatics, ICEEI 2011. IEEE Computer Society, Piscataway, USA, pp. 1-6. ISBN 9781457707537 (Print), 9781457707520 (Online) (doi:10.1109/ICEEI.2011.6021642)

cooperative communication

core flow

corrosion

Mahmoodian, M. and Li, C.Q. (2012) Service life prediction of underground concrete pipes subjected to corrosion. In: Concrete Solutions 2011. Concrc -The Concrete Solutions series of International Conferences on Concrete Repair . CRC Press. ISBN 9780415616225 (Hardback), 9780203134689 (ebook)

Corrosion Long-term performance

corrosion rate

coupling analysis

course delivery

crack closure

Tee, Kong-Fah, Christopher, C.J., James, M.N. and Patterson, E.A. (2007) Towards a new model of crack tip stress fields. International Journal of Fracture, 148 (4). pp. 361-371. ISSN 0376-9429 (doi:10.1007/s10704-008-9209-3)

crack closure

Christopher, C.J., James, M.N., Patterson, E.A. and Tee, Kong-Fah (2008) A quantitative evaluation of fatigue crack shielding forces using photoelasticity. Engineering Fracture Mechanics, 75 (14). pp. 4190-4199. ISSN 0013-7944 (doi:10.1016/j.engfracmech.2008.03.013)

crack shielding

James, M.N., Christopher, C.J., Lu, Yanwei, Tee, K.F. and Patterson, E.A. (2011) Crack tip shielding from a plastic 'inclusion'. Key Engineering Materials , 465 (1). pp. 1-8. ISSN 1662-9795 (doi:10.4028/www.scientific.net/KEM.465.1)

crack tip displacement

crack tip shielding

Christopher, C.J., James, M.N., Tee, Kong-Fah and Patterson, E.A. (2008) Evaluation of crack tip shielding using a photoelastic model. In: the SEM XI International Congress on Experimental and Applied Mechanics, 2-5 June 2008, Orlando, FL, USA, .

Tee, Kong-Fah, Christopher, C.J., James, M.N. and Patterson, E.A. (2007) New insights into plasticity-induced crack tip shielding via mathematical modelling and full field photoelasticity. Key Engineering Materials, 345-346. pp. 199-204. ISSN 1013-9826 (doi:10.4028/www.scientific.net/KEM.345-346.199)

Tee, Kong-Fah, Christopher, C.J., James, M.N. and Patterson, E.A. (2007) New insights into plasticity-induced crack tip shielding via mathematical modelling and full field photoelasticity. In: 10th International Conference on the Mechanical Behavior of Materials (ICM), 27-31 May 2007, Busan, Korea. (Unpublished)

crack tip stress

crack width

cracking

Li, Chun-Qing, Yang, Yang and Melchers, Robert E. (2008) Prediction of reinforcement corrosion in concrete and its effects on concrete cracking and strength reduction. ACI Materials Journal, 105 (1). pp. 3-10. ISSN 0889-325X

creep

Marks, Antony, Ekere, Ndy, Mallik, Sabuj and Bhatti, Rajinderpal (2011) Effect of particle size distribution (PSD) and flux medium on the creep recovery performance of lead-free solder pastes. Soldering and Surface Mount Technology, 23 (2). pp. 75-84. ISSN 0954-0911 (doi:10.1108/09540911111120140)

cross-flow filtration

crowd

Siddiqui, A.A. and Gwynne, S.M.V. (2012) Employing pedestrian observations in engineering analysis. Safety Science, 50 (3). pp. 478-493. ISSN 0925-7535 (doi:10.1016/j.ssci.2011.10.011)

crowd formations

CSM

Taylor, Gareth Anthony (1996) A vertex based discretisation scheme applied to material non-linearity within a multi-physics finite volume framework. PhD thesis, University of Greenwich.

curing

customer-driven

Soroka, A.J. and Hieu, L.C. (2011) Design challenges for implementing a customer driven mass-customisation system. In: Proceedings - INDIN 2011: 2011 9th IEEE International Conference on Industrial Informatics. Institute of Electrical and Electronics Engineers Inc, Piscataway, USA, pp. 857-862. ISBN 9781457704338 (Online), 9781457704352 (Print) (doi:10.1109/INDIN.2011.6035005)

customisation

cutting conditions

Owodunni, Oladele, Hinduja, Srichand, Mekid, Samir and Zia, Ahmad (2007) An investigation of optimum cutting conditions for STEP-NC turned features. In: Innovative Production Machines and Systems Conference 2007 (IPROMS), 2-13 July 2007, http://conference.iproms.org/ [Virtual Conference].

cyclic loading

Javadi, Akbar A., Faramarzi, Asaad and Ahangar-Asr, Alireza (2012) Analysis of behaviour of soils under cyclic loading using EPR-based ﬁnite element method. Finite Elements in Analysis and Design, 58. pp. 53-65. ISSN 0168-874X (doi:10.1016/j.finel.2012.04.005)

cylinders

Ashley, Richard Martin (1980) Forces on cylinders in relative fluid motion. MPhil thesis, Thames Polytechnic.

cylindrical concrete

cylindrical roof shells

Ostovari-Dailamani, Shadi and Croll, James G. A. (2009) Effect of pre-loading on response of cylindrical roof shells under earthquake loading. In: 9th Asia Pacific Conference on Shell and Spatial Structures (APCS) 2009, 27-29 May 2009, Nagoya Congress Center, Nagoya, Japan. (Submitted)

d-ornithine 4

damage assessment

Chen, Hua-Peng (2008) Application of regularization methods to damage detection in large scale plane frame structures using incomplete noisy modal data. Engineering Structures, 30 (11). 3219 - 3227. ISSN 0141-0296 (doi:10.1016/j.engstruct.2008.04.038)

data mining

Ahangar-Asr, A., Faramarzi, A., Mottaghifard, N. and Javadi, A.A. (2011) Modeling of permeability and compaction characteristics of soils using evolutionary polynomial regression. Computers & Geosciences, 37 (11). pp. 1860-1869. ISSN 0098-3004 (doi:10.1016/j.cageo.2011.04.015)

Javadi, A.A., Ahangar-Asr, A., Johari, A., Faramarzi, A. and Toll, D. (2012) Modelling stress-strain and volume change behaviour of unsaturated soils using an evolutionary based data mining technique, an incremental approach. Engineering Applications of Artificial Intelligence, 25 (5). pp. 926-933. ISSN 0952-1976 (doi:10.1016/j.engappai.2012.03.006)

DCE

Chen, Li Choo (2007) Optimisation of rule-based testing for scheduling within a distributed computing environment. PhD thesis, University of Greenwich.

DCM

decode and forward

deformation

Stoyanov, Stoyan, Tilford, Tim, Amalou, Farid, Cargill, Scott, Bailey, Christopher and Desmulliez, Marc P.Y. (2011) Modelling and optimisation study on the fabrication of nano-structures using imprint forming process. Engineering Computations, 28 (1). pp. 93-111. ISSN 0264-4401 (doi:10.1108/02644401111097046)

delay effects

delay-Doppler resolution

delivery methods

dematerialisation

Steward, Fred, Tsoi, Joyce and Coles, Anne-Marie (2008) Innovation and sustainability in print-on-paper: a comparison of nanoparticle and deinking niches as emergent sociotechnical networks. Journal of Cleaner Production, 16 (8/9). pp. 957-966. ISSN 0959-6526 (doi:10.1016/j.jclepro.2007.04.008)

Steward, Fred, Tsoi, Joyce and Coles, Anne-Marie (2006) Nanoparticle innovation and print-on-paper fibre recyclability – mapping niches as emergent sociotechnical networks. Working Paper. Brunel University , Brunel University, London.

density

Bailey, Christopher John (1988) Multi phase numerical modelling of thickening and sedimentation. PhD thesis, Thames Polytechnic.

dental composites

Versluis, Antheunis (1994) Origin and development of internal stresses during polymerization of composite resins. PhD thesis, University of Greenwich.

design

Motamed, Jubin, Al-Hussaini, Abbas and Alani, Amir Morteza (2012) Shear design of HSC beams with combination of links and horizontal web steel. Magazine of Concrete Research, 64 (9). pp. 781-791. ISSN 0024-9831 (print), 1751-763X (electronic) (doi:10.1680/macr.11.00047)

design challenges

design conflict solving

design environment

design knowledge reuse

Baxter, David, Rajkumar, Roy and Gao, James (2008) Design process knowledge reuse challenges and issues. Computer Aided Design and Applications, 5 (6). pp. 942-952. ISSN 1686-4360 (doi:10.3722/cadaps.2008.942-952)

Gao, James, Baxter, David, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2007) An engineering design knowledge reuse methodology using process modelling. Research in Engineering Design, 18 (1). pp. 37-48. ISSN 0934-9839 (doi:10.1007/s00163-007-0028-8)

design methodology

Baxter, David, Gao, James, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2008) A framework to integrate design knowledge reuse and requirements management in engineering design. Robotics and Computer-Integrated Manufacturing, 24 (4). pp. 585-593. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.010)

Gwynne, Steve (2008) Helping people on their own terms: developing inclusive emergency procedures. Fire Technology, 44 (4). pp. 439-461. ISSN 0015-2684 (doi:10.1007/s10694-007-0039-z)

design process support

design reuse

design support

detection

Maung, T.S., Chen, Hua Peng and Alani, A.M. (2011) Real time structural damage assessment from vibration measurements. In: 9th International Conference on Damage Assessment of Structures (DAMAS 2011). Journal of Physics: Conference Series, 305 (1). IOP Publishing, Bristol, UK. ISSN 1742-6588 (Print), 1742-6596 (Online) (doi:10.1088/1742-6596/305/1/012096)

deterioration

deterministic angle clustering

Chen, Y., Zhang, Z., Hu, L. and Rapajic, P.B. (2009) Geometry-based statistical model for radio propagation in rectangular office buildings. Progress In Electromagnetics Research B, 17. pp. 187-212. ISSN 1937-6472 (doi:10.2528/PIERB09080603)

differential equation

diffusion problem

digital image correlation (DIC)

directives

disassembly

disaster

Motamed, Jubin (2005) The Bam earthquake of 26 December 2003, Iran. Other. Institution of Structural Engineers / Earthquake Engineering Field Investigation Team (EEFIT) [website], London, UK.

Stoppani, Teresa (2012) The architecture of the disaster. Space and Culture, 15 (2). pp. 135-150. ISSN 1206-3312 (print), 1552-8308 (electronic) (doi:doi : 10.1177/1206331211430018 )

Distributed Computing Environment

Chen, Li Choo (2007) Optimisation of rule-based testing for scheduling within a distributed computing environment. PhD thesis, University of Greenwich.

diversity gain

double layers

drill cuttings

DRM

drug delivery

Jalili, Vahid (2004) Application of CFD in designing a drug delivery mixing chamber: an experimental and computational study. PhD thesis, University of Greenwich.

DSR

dual ground

ductility

dynamic

dynamic modal analysis

dynamic perturbation method

dynamics

Fallah, Nosrat Allah (2000) Computational stress analysis using finite volume methods. PhD thesis, University of Greenwich.

e-business

Bak, Ozlem (2008) An evaluation of e-business impact in MNC`s. In: 19th International Conference on Database and Expert Systems Application. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc, Piscataway, NJ, USA, pp. 501-505. ISBN 978-0-7695-3299-8 ISSN 1529-4188 (doi:10.1109/DEXA.2008.91)

e-learning

EAF

earthquake

Motamed, Jubin (2005) The Bam earthquake of 26 December 2003, Iran. Other. Institution of Structural Engineers / Earthquake Engineering Field Investigation Team (EEFIT) [website], London, UK.

Rezania, Mohammad, Faramarzi, Asaad and Javadi, Akbar A. (2011) An evolutionary based approach for assessment of earthquake-induced soil liquefaction and lateral displacement. Engineering Applications of Artificial Intelligence, 24 (1). pp. 142-153. ISSN 0952-1976 (doi:10.1016/j.engappai.2010.09.010)

earthquake analysis

Ostovari-Dailamani, Shadi and Croll, James G. A. (2008) Behaviour of cylindrical and doubly-curved shell roofs under earthquake. In: Proceedings of the 6th International Conference on Computation of Shell and Spatial Structures. Cornell University, Cornell, USA.

earthquake damage

earthquakes

effective properties

Okereke, M. I. and Akpoyomare, A. I. (2013) A virtual framework for prediction of full-field elastic response of unidirectional composites. Computational Materials Science, 70. pp. 82-99. ISSN 0927-0256 (Online) (doi:/10.1016/j.commatsci.2012.12.036)

egress strategy

elastic and plastic behaviour

elastic modulus

Li, Chun-Qing and Zheng, Jian Jun (2007) Closed-form solution for predicting elastic modulus of concrete. ACI Materials Journal, 104 (5). pp. 539-546. ISSN 0889-325X

elastic waves

elasticity

elasto-visco plasticity

Taylor, Gareth Anthony (1996) A vertex based discretisation scheme applied to material non-linearity within a multi-physics finite volume framework. PhD thesis, University of Greenwich.

electrical engineering

Li, Ji (2007) A study of the solid particle erosion performance of automative and other novel low carbon steels. PhD thesis, University of Greenwich.

electrodynamic sensors

Yan, Y., Byrne, B., Woodhead, Steve and Coulthard, John M. (1995) Velocity measurement of pneumatically conveyed solids using electrodynamic sensors. Measurement Science and Technology, 6 (5). pp. 515-537. ISSN ISSN 0957-0233 (Print) ISSN 1361-6501 (Online) (doi:10.1088/0957-0233/6/5/013)

electrohydrodynamic

electromagnetic levitation

Etay, Jacqueline, Schetelat, Pascal, Bardet, Benoit, Priede, Janis, Bojarevics, Valdis and Pericleous, Koulis A. (2008) Modelling of electromagnetic levitation – consequences on non-contact physical properties measurements. High Temperature Materials and Processes, 27 (6 (Special Issue)). pp. 439-447. ISSN 0334-6455

electron-multiplying charge-coupled device (EMCCD)

Krabicka, Jan, Lu, Gang and Yan, Yong (2011) Profiling and characterization of flame radicals by combining spectroscopic imaging and neural network techniques. IEEE Transactions on Instrumentation and Measurement, 60 (5). pp. 1854-1860. ISSN 0018-9456 (doi:10.1109/TIM.2010.2102411)

electronic business

electronic control unit

Otiaba, K.C., Ekere, N.N., Amalu, E.H., Bhatti, R.S. and Mallik, S. (2012) Thermal management materials for electronic control unit: trends, processing technology and R and D challenges. Advanced Materials Research, 367. pp. 301-307. ISSN 1022-6680 (Print), 1662-8985 (Online) (doi:10.4028/www.scientific.net/AMR.367.301)

Electronic Nose

electronic unit

elevators

Kinsey, Michael J., Galea, Edwin R. and Lawrence, Peter J. (2012) Investigating evacuation lift dispatch strategies using computer modelling. Fire and Materials, 36 (5-6). ISSN 1099-1018 (doi:10.1002/fam.1086)

elliptical random network (ERN)

Chen, Yifan and Rapajic, Predrag (2010) Decentralized wireless relay network channel modeling: An analogous approach to mobile radio channel characterization. IEEE Transactions on Communications, 58 (2). pp. 467-473. ISSN 0090-6778 (doi:10.1109/TCOMM.2010.02.080315)

emergency evacuation

Ronchi, E., Gwynne, S.M.V., Purser, D.A. and Colonna, P. (2012) Representation of the impact of smoke on agent walking speeds in evacuation models. Fire Technology. ISSN 0015-2684 (print), 1572-8099 (electronic) (In Press) (doi:10.1007/s10694-012-0280-y)

emotion modelling

Hollmann, Claudia, Lawrence, Peter and Galea, Edwin (2011) Introducing emotion modelling to agent-based pedestrian circulation simulation. In: Pedestrian and Evacuation Dynamics. Springer, New York / Dordrecht / Heidelberg / London, pp. 799-803. ISBN 978-1-4419-9724-1, (e-ISBN) 978-1-4419-9725-8 (doi:10.1007/978-1-4419-9725-8_77)

empirical model

Li, Chun-Qing, Zheng, J.J., Lawanwisut, Wimon and Melchers, Robert E. (2007) Concrete delamination caused by steel reinforcement corrosion. Journal of Materials in Civil Engineering, 19 (7). pp. 591-600. ISSN 0899-1561 (doi:10.1061/(ASCE)0899-1561(2007)19:7(591))

enclosure fire

end users

energy and resource efficiency and effectiveness

engineering and management

engineering design

Fei, Genyuan (2011) A methodology for engineering design change analysis using system modelling and knowledge management technologies. PhD thesis, University of Greenwich.

engineering safety measures

Hoffmann, Nicole Andrea (1990) Computer simulation of fire-sprinkler interaction. PhD thesis, Thames Polytechnic.

Enterprise Architecture Framework

Zhang, Pengcheng and Gao, James (2010) Requirements driven knowledge system design for product development. In: Proceedings of the 6th CIRP-Sponsored International Conference on Digital Enterprise Technology. Advances in Intelligent and Soft Computing, 66/201 . Springer, Hong Kong, pp. 169-184. ISBN 9783642104299 ISSN 1867-5662 (doi:10.1007/978-3-642-10430-5_13)

enterprise knowledge

enterprise resource planning

environmental noise barriers

EPR

Faramarzi, Asaad, Javadi, Akbar A. and Alani, Amir M. (2012) EPR-based material modelling of soils considering volume changes. Computers & Geosciences, 48. pp. 73-85. ISSN 0098-3004 (doi:10.1016/j.cageo.2012.05.015)

erosion testers

escalator

Kinsey, Michael J., Galea, Edwin R. and Lawrence, Peter J. (2012) Modelling evacuation using escalators: a London Underground dataset. In: PED 2012: 6th International Conference on Pedestrian and Evacuation Dynamics. Springer-Verlag, Berlin / Heidelberg .

evacuation

Galea, Edwin R., Hulse, Lynn, Day, Rachel, Siddiqui, Asim and Sharp, Gary (2011) The UK WTC 9/11 evacuation study: an overview of findings derived from first-hand interview data and computer modelling. Fire and Materials, 36 (5-6). pp. 501-521. ISSN 0308-0501 (Print), 1099-1018 (Online) (doi:10.1002/fam.1070)

evacuation model

evacuation modelling

evacuation modelling analyses

Machado Tavares, Rodrigo (2011) The use of numerical optimisation techniques in computational fire engineering models: a study through evacuation modelling analyses. PhD thesis, University of Greenwich.

evacuation models

Kinsey, Michael Jon. (2011) Vertical transport evacuation modelling. PhD thesis, University of Greenwich.

evacuation procedures

Gwynne, Steve (2008) Helping people on their own terms: developing inclusive emergency procedures. Fire Technology, 44 (4). pp. 439-461. ISSN 0015-2684 (doi:10.1007/s10694-007-0039-z)

evacuation simulation

evolutionary computation

evolutionary computing

evolutionary optimization

evolutionary regression

evolutionary techniques

excitation ultra wideband (UWB) waveforms

experiment

experimental and applied mechanics

experimental condensed models

Tee, Kong-Fah and Chen, Hua-Peng (2010) Retrieving full stiffness matrix from experimental condensed models. In: 10th International Conference on Recent Advances in Structural Dynamics, 12-14 July , Southampton, UK. (Unpublished)

experimental studies

explosion

face-to-face meetings

facilities management

failure

failure function

fatigue failure

Amalu, E.H., Ekere, N.N., Bhatti, R.S., Mallik, S., Takyi, G. and Ibhadode, A.O.A. (2011) Numerical investigation of thermo-mechanical behaviour of ball grid array solder joint at high temperature excursion. Advanced Materials Research, 367. pp. 287-292. ISSN 1662-8985 (Print), 1022-6680 (Online) (doi:10.4028/www.scientific.net/AMR.367.287)

FATMAN

Ridout, Stephen Walter (2007) Modelling to predict the reliability of solder joints. PhD thesis, University of Greenwich.

FEA

Ridout, Stephen Walter (2007) Modelling to predict the reliability of solder joints. PhD thesis, University of Greenwich.

feature-based model

FFM

field model

field report

Motamed, Jubin (2005) The Bam earthquake of 26 December 2003, Iran. Other. Institution of Structural Engineers / Earthquake Engineering Field Investigation Team (EEFIT) [website], London, UK.

finite difference method

finite element

finite element analysis

Ridout, Stephen Walter (2007) Modelling to predict the reliability of solder joints. PhD thesis, University of Greenwich.

finite element method

finite elements

finite volume

finite volume algorithms

Edussuriya, Suchitra Samanthi (2003) Computational analysis of viscoelastic free surface flows. PhD thesis, University of Greenwich.

fire

fire effluent

Fire Field Modelling

fire safety

fires

Hoffmann, Nicole Andrea (1990) Computer simulation of fire-sprinkler interaction. PhD thesis, Thames Polytechnic.

flame

flame radicals

flame spread models

Hu, Xiaoqin, Wang, Zhaozhi, Jia, Fuchen and Galea, Edwin R. (2010) Simulating a rail car fire using flame spread model. In: Interflam 2010: 12th International Fire Science & Engineering Conference. Interscience Communications, Greenwich, London, UK, pp. 1725-1730. ISBN 978-0-9541216-6-2 (volume 2) 978-0-9556548-7-9 (set)

Floe

flood forces

Falconer, Robert E., Boughton, B. and Paterson, F. (2010) Strengthening of masonry bridges against traffic and flooding. In: Structural Faults and Repair 2010 13th International Congress and Exhibition, 15-17 June 2010, Edinburgh.

flow properties

flowability

Kulkarni, P.A., Berry, R.J. and Bradley, M.S.A. (2010) Review of the flowability measuring techniques for powder metallurgy industry. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 224 (3). pp. 159-168. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/09544089JPME299)

fluid dynamics

Ashley, Richard Martin (1980) Forces on cylinders in relative fluid motion. MPhil thesis, Thames Polytechnic.

fluid flow

fluid mechanics

Croft, Thomas Nicholas (1998) Unstructured mesh - finite volume algorithms for swirling, turbulent, reacting flows. PhD thesis, University of Greenwich.

Fallah, Nosrat Allah (2000) Computational stress analysis using finite volume methods. PhD thesis, University of Greenwich.

fluidized-beds

flux

fracture mechanics

fractures

Moorman, John Everard (2005) A method for the probabilistic method assessment of structures containing defects. PhD thesis, University of Greenwich.

frame structure

friction resistance

Cetin, D., Yildirim, S. and Kilic, G. (2011) A New Approach for Determination of Adhesion Coefficient in Pipejacking Method by Experimental and Numerical Analysis: An Example from Istanbul. Experimental Techniques. pp. 1-17. ISSN 1046-6789 (doi:10.1111/j.1747-1567.2011.00764.x)

frictional contact

Fukushima

full field photoelasticity

full scale enclosure fires

Wang, Zhaozhi, Jia, Fuchen and Galea, Edwin R. (2010) Predicting concentrations of hydrogen cyanide in full scale enclosure fires. In: Interflam 2010: 12th International Fire Science & Engineering Conference. Interscience Communications, Greenwich, London, UK, pp. 1769-1774. ISBN 978-0-9541216-6-2 (volume 2) 978-0-9556548-7-9 (set)

fuzzy logic

gas sensors

gas-blast erosion tester

gas-blast tester

generation

Geographical Information Systems

Turner, Tom and Bowen, Bryan (1998) Public open space: planning and management with GIS. University of Greenwich Press, Greenwich, London. ISBN 978-1861661005

geological analysis

Ahangar-Asr, Alireza, Faramarzi, Asaad and Javadi, Akbar A. (2010) A new approach for prediction of the stability of soil and rock slopes. Engineering Computations, 27 (7). pp. 878-893. ISSN 0264-4401 (doi:10.1108/02644401011073700)

geometric channel models (GCMs)

GIS

Turner, Tom and Bowen, Bryan (1998) Public open space: planning and management with GIS. University of Greenwich Press, Greenwich, London. ISBN 978-1861661005

glass

glass transition temperature

GPS triangulation

granular food

granular material

gravity

Bailey, Christopher John (1988) Multi phase numerical modelling of thickening and sedimentation. PhD thesis, Thames Polytechnic.

ground slab

growth rate

guidelines

Hajj

Siddiqui, A.A. and Gwynne, S.M.V. (2012) Employing pedestrian observations in engineering analysis. Safety Science, 50 (3). pp. 478-493. ISSN 0925-7535 (doi:10.1016/j.ssci.2011.10.011)

hdrogen cyanide

heat capacity meassurement

heat preservation

HEI

helibars

Hidden Markov Models (HMM)

Nijsure, Y., Chen, Yifan, Litchfield, C. and Rapajic, P.B. (2009) Hidden Markov model for target tracking with UWB radar systems. In: Personal, Indoor and Mobile Radio Communications. Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ, USA, pp. 2065-2069. ISBN 978-1-4244-5123-4 (online), 978-1-4244-5122-7 (print) (doi:10.1109/PIMRC.2009.5450337)

hierarchical control techniques

Bakalis, Panos and Ellis, J.E. (1989) Simulation of hierarchical control algorithms using a steady-state mathematical model of a vaporizer plant. Applied Mathematical Modelling, 13 (7). pp. 413-419. ISSN 0307-904X (doi:10.1016/0307-904X(89)90153-4)

Bakalis, Panos and Ellis, J.E. (1992) The application of large-scale systems optimization control algorithms. Applied Mathematical Modelling, 16 (4). pp. 201-207. ISSN 0307-904X (doi:10.1016/0307-904X(92)90058-B)

hierarchical temporal memory

high strength concrete

high strength concrete beams

high temperature electronics

high-aspect ratio microfabrication

high-rate compression

Okereke, Michael I., Buckley, C.P. and Siviour, C.R. (2012) Compression of polypropylene across a wide range of strain rates. Mechanics of Time-Dependent Materials. ISSN 1385-2000 (Print), 1573-2738 (Online) (In Press) (doi:10.1007/s11043-012-9167-z)

high-rise building

high-rise building evacuation

higher education institutions

hollow microstucture

homolytic rupture

honeycomb structures

horizontal web steel

HTE

Amalu, E.H., Ekere, N.N. and Bhatti, R.S. (2010) High temperature electronics: R&D challenges and trends in materials, packaging and interconnection technology. In: 2nd International Conference on Adaptive Science & Technology, 2009. (ICAST 2009). Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 146-153. ISBN 978-1-4244-3522-7 ISSN 0855-8906 (doi:10.1109/ICASTECH.2009.5409731)

human behaviour

human behaviour in fire

human factors

human factors data

human vision models

humans

IEC 60695-7-50

image processing

imaging

implants

Le, C.H., Okereke, M.I., Nguyen, V.H., Dao, V.D., Soe, S., Zlatov, N. and Le, T.H. (2011) Personalised medical product development: Methods, challenges and opportunities. Romanian Review Precision Mechanics, Optics and Mechatronics, 40. pp. 11-20. ISSN 1584-5982

implementation

Gwynne, Steve (2008) Helping people on their own terms: developing inclusive emergency procedures. Fire Technology, 44 (4). pp. 439-461. ISSN 0015-2684 (doi:10.1007/s10694-007-0039-z)

incomplete noisy measurements

indexing process

induced ventilation

induction

industrial flow process

Edussuriya, Suchitra Samanthi (2003) Computational analysis of viscoelastic free surface flows. PhD thesis, University of Greenwich.

industrial processes

Taylor, Gareth Anthony (1996) A vertex based discretisation scheme applied to material non-linearity within a multi-physics finite volume framework. PhD thesis, University of Greenwich.

information azimuth-delay spectrum (IADS)

information systems design

information-theoretic approach

injection moulding

Abramovich, H., Burgard, M., Edery-Azulay, Lucy, Evans, K.E., Hoffmeister, M., Miller, W., Scarpa, F., Smith, C.W. and Tee, Kong-Fah (2010) Smart tetrachiral and hexachiral honeycomb: sensing and impact detection. Composites Science and Technology, 70 (7). 1072-1079 . ISSN 0266-3538 (doi:10.1016/j.compscitech.2009.07.017)

innovation

innovation and research

instabilities

interface

interface crack

interfacial reactions

interfacial transition zone

Li, Chun-Qing and Zheng, Jian Jun (2007) Closed-form solution for predicting elastic modulus of concrete. ACI Materials Journal, 104 (5). pp. 539-546. ISSN 0889-325X

interior environments

intermetallic compounds

internal feedback

internet

interpolation

inverted cones

iochemical engineering

Versluis, Antheunis (1994) Origin and development of internal stresses during polymerization of composite resins. PhD thesis, University of Greenwich.

Iran

Motamed, Jubin (2005) The Bam earthquake of 26 December 2003, Iran. Other. Institution of Structural Engineers / Earthquake Engineering Field Investigation Team (EEFIT) [website], London, UK.

ISO 19700

Jenike wall friction tester

junction temperatures

just-noticeable difference

key parameters

key performance indicators

Cooper, Justine and Jones, Keith (2009) Measuring performance in-use in UK social housing. In: COBRA 2009: The Construction and Building Research Conference of the Royal Institution of Chartered Surveyors. Royal Institution of Chartered Surveyors (RICS), London, UK, pp. 916-928. ISBN 978-1-84219-519-2

KM

Piorkowski, Barry Andrew, Gao, James Xiaoyu, Evans, Richard David and Martin, Nick (2013) A dynamic knowledge management framework for the high value manufacturing industry. International Journal of Production Research, 51 (7). pp. 2176-2185. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:10.1080/00207543.2012.709650)

know-how

knowledge management

knowledge management system

knowledge representation

knowledge system design

land mobile radio cellular system

Anang, K.A., Rapajic, P.B., Bello, L. and Wu, R. (2012) Sensitivity of cellular wireless network performance to system and propagation parameters at carrier frequencies greater than 2 GHz. Progress In Electromagnetics Research B (PIERB), 40. pp. 31-54. ISSN 1937-6472 (doi:10.2528/PIERB12012303)

large span

large span roof structures

large-scale systems

Laser Doppler Anemometry

Jalili, Vahid (2004) Application of CFD in designing a drug delivery mixing chamber: an experimental and computational study. PhD thesis, University of Greenwich.

laser Doppler velocimetry measurements

Woodhead, Steve, Pittman, A.N. and Ashenden, Stuart J. (1995) Laser Doppler velocimetry measurements of particle velocity profiles in gas-solid two-phase flows. In: 1995 IEEE Instrumentation and Measurement Technology. Institute of Electrical and Electronics Engineers, New York, pp. 770-773. ISBN 978-0780326156

late-time target response

Chen, Yifan, Craddock, I.J. and Kosmas, P. (2010) Feasibility study of lesion classification via contrast-agent-aided UWB breast imaging. IEEE Transactions on Biomedical Engineering, 57 (5). pp. 1003-1007. ISSN 0018-9294 (doi:10.1109/TBME.2009.2038788)

lateral displacement

LDA

Jalili, Vahid (2004) Application of CFD in designing a drug delivery mixing chamber: an experimental and computational study. PhD thesis, University of Greenwich.

leaching

lead

LED backlighting devices

legacy

Gulsen, Guler and Holden, Robert (2010) Olympics Legacy: the London Olympics 2012. Istanbul Technical University Journal of Faculty of Architecture, 7 (2). pp. 58-73. ISSN 1302-8324

life cycle

lifts

linear antenna arrays

linearisation

liquefaction

load-displacement relationship

Xiao, Nan and Chen, Hua Peng (2011) Theoretical prediction on the shear capacities of shear connectors in steel column bases. Advances in Structural Engineering, 14 (5). pp. 953-966. ISSN 1369-4332 (doi:10.1260/1369-4332.14.5.953)

local equivalence ratio

local equivalence ratio (LER)

localization

London

Gulsen, Guler and Holden, Robert (2010) Olympics Legacy: the London Olympics 2012. Istanbul Technical University Journal of Faculty of Architecture, 7 (2). pp. 58-73. ISSN 1302-8324

London Underground subway

loss modulus

maintenance

maintenance strategy

Li, Chun-Qing, Mackie, Robert Ian and Lawanwisut, Wimon (2007) A risk-cost optimized maintenance strategy for corrosion-affected concrete structures. Computer-Aided Civil and Infrastructure Engineering, 22 (5). pp. 335-346. ISSN 1093-9687 (doi:10.1111/j.1467-8667.2007.00490.x)

management knowledge

MANET

manufacturing

manufacturing and cost evaluation

manufacturing information systems

manufacturing processes

Taylor, Gareth Anthony (1996) A vertex based discretisation scheme applied to material non-linearity within a multi-physics finite volume framework. PhD thesis, University of Greenwich.

manufacturing systems

map based triangulation

mapping

Stoppani, Teresa (2012) The architecture of the disaster. Space and Culture, 15 (2). pp. 135-150. ISSN 1206-3312 (print), 1552-8308 (electronic) (doi:doi : 10.1177/1206331211430018 )

marine

MARS System

masonry arches

mass production

material

material modelling

materials

materials science

Dyroy, Are (2006) Quantification and mitigation of segregation in the handling of alumina in aluminium production. PhD thesis, University of Greenwich.

mathematical model

mathematical modelling

Hoffmann, Nicole Andrea (1990) Computer simulation of fire-sprinkler interaction. PhD thesis, Thames Polytechnic.

Ridout, Stephen Walter (2007) Modelling to predict the reliability of solder joints. PhD thesis, University of Greenwich.

Tee, Kong-Fah, Christopher, C.J., James, M.N. and Patterson, E.A. (2007) New insights into plasticity-induced crack tip shielding via mathematical modelling and full field photoelasticity. In: 10th International Conference on the Mechanical Behavior of Materials (ICM), 27-31 May 2007, Busan, Korea. (Unpublished)

mathematical models

maximum dry density

measured results

mechanical behaviour of materials

mechanical engineering

Li, Ji (2007) A study of the solid particle erosion performance of automative and other novel low carbon steels. PhD thesis, University of Greenwich.

mechanical properties of materials

medical product development

meeting capture

message authentication code (MAC)

metal casting

Taylor, Gareth Anthony (1996) A vertex based discretisation scheme applied to material non-linearity within a multi-physics finite volume framework. PhD thesis, University of Greenwich.

metals casting

Bailey, Christopher, Lyster, C., Cross, Mark, Fryer, Yvonne and Pericleous, Koulis A. (1996) Multiphysics modelling of the metals casting process. Proceedings of the Royal Society A, 452 (1946). pp. 459-486. ISSN Online: 1471-2946 (doi:10.1098/rspa.1996.0024)

methods for design of hoppers

Bradley, Michael, Berry, Robert and Farnish, Richard (2011) Methods for design of hoppers. Silos, bins and bunkers for reliable gravity flow, for pharmaceutical, food, mineral and other applications. In: BulkSolids India 2011, 6-8 April 2011, Mumbai, India. (Unpublished)

micro-physical parametrizations

microchannel device

microfluidic device

microfluidics

microgravity materials research

Pericleous, Kyriacos (2011) Computational science and the future. Public Service Review: UK Science and Technology, 4. pp. 26-27. ISSN 2046-5696 (Online) 2045-3884 (Print)

microwave

microwave oven

Pavuluri, S.K., Goussetis, George, Desmulliez, Marc P.Y., Adamietz, R., Tilford, Tim, Ferenets, M., Muller, G., Eicher, F. and Bailey, Christopher (2011) Open-ended single mode resonant applicator for microelectronics packaging applications. In: Proceedings of the Microwave Heating and Processing of Materials Seminar 2011. IET, pp. 89-91. ISBN 978 1 84919 310 8

miniaturization

MMSE-MUD

mobile technology

Dickinger, Astrid, Arami, Mitra and Meyer, David (2006) Reconsidering the adoption process: enjoyment and social norms — antecedents of hedonic mobile technology use. In: Proceedings of the 39th Annual Hawaii International Conference on System Sciences, 2006. IEEE Xplore, Piscataway, NJ, USA, 23a-23a. ISBN 0-7695-2507-5 ISSN 1530-1605 (doi:10.1109/HICSS.2006.410)

modal analysis

modal mass

mode shape expansion

Chen, Hua Peng (2010) Mode shape expansion using perturbed force approach. Journal of Sound and Vibration, 329 (8). pp. 1177-1190. ISSN 0022-460X (doi:10.1016/j.jsv.2009.10.027)

model updating

modeling

modelling

Fei, Genyuan (2011) A methodology for engineering design change analysis using system modelling and knowledge management technologies. PhD thesis, University of Greenwich.

modelling and simulation

morphology-dependent backscatter signature

moving interfaces

mulation experiments

multi-antenna wireless communication

multi-component gas mixture measurements

multi-disciplinary analysis

multi-inter phase slip algorithm

multi-phase flow

multi-physics

multiband antennas

Callaghan, Peter and Batchelor, John C (2008) Dual-band pin-patch antenna for wi-fi applications. IEEE Antennas and Wireless Propagation Letters, 7. pp. 757-760. ISSN 1536-1225 (doi:10.1109/LAWP.2008.2004885)

multiple tier co-channel interference

Multiple-Input Multiple-Output (MIMO)

multiuser detection scheme

Muskhelishvili

mutual information (MI)

nanotechnology

NDT

negative impedance compensation

negative Poisson's ratio

neural networks

new product design

new product development

new product introduction

New York 9/11

Stoppani, Teresa (2012) The architecture of the disaster. Space and Culture, 15 (2). pp. 135-150. ISSN 1206-3312 (print), 1552-8308 (electronic) (doi:doi : 10.1177/1206331211430018 )

NIST cipher block chaining MAC standard

noise legislation

noise mitigation

noise pollution

noise signals

Amadi-Echendu, J.E. and Woodhead, Steve (1995) Characterising noise signals in 2-phase solid gas flows. In: 1995 IEEE Instrumentation and Measurement Technology. Institute of Electrical and Electronics Engineers, New York, pp. 778-781. ISBN 978-0780326156 (doi:10.1109/IMTC.1995.515422)

non-destructive testing

non-orthogonality

normalized mode shape

novel tetrachiral honeycomb

Tee, Kong-Fah, Spadoni, A., Scarpa, F. and Ruzzene, M. (2008) Vibroacoustics and wave propagation of novel chiral honeycombs. Proceedings of SPIE: Advanced Materials and Structures, 6928, 69280J. ISSN 0277-786X (doi:10.1117/12.776075)

NPD

nuclear industry

nuclear power

nuclear reactors

numerical analysis

Jalili, Vahid (2004) Application of CFD in designing a drug delivery mixing chamber: an experimental and computational study. PhD thesis, University of Greenwich.

numerical modelling

Bailey, Christopher John (1988) Multi phase numerical modelling of thickening and sedimentation. PhD thesis, Thames Polytechnic.

numerical models

numerical optimisation

Alessandri, E., Buchlin, J.M. and Patel, Mayur (1996) Numerical optimisation of water curtain barriers design. Technical Report. University of Greenwich, London. (doi:1899991166)

numerical optimisation techniques

numerical solution

Fallah, Nosrat Allah (2000) Computational stress analysis using finite volume methods. PhD thesis, University of Greenwich.

numerical techniques

Ridout, Stephen Walter (2007) Modelling to predict the reliability of solder joints. PhD thesis, University of Greenwich.

objects

office buildings

oil tanks

Olympic park

Gulsen, Guler and Holden, Robert (2010) Olympics Legacy: the London Olympics 2012. Istanbul Technical University Journal of Faculty of Architecture, 7 (2). pp. 58-73. ISSN 1302-8324

Olympics

Gulsen, Guler and Holden, Robert (2010) Olympics Legacy: the London Olympics 2012. Istanbul Technical University Journal of Faculty of Architecture, 7 (2). pp. 58-73. ISSN 1302-8324

on-line computer control

online

ontology

Aziz, Hayder, Li, Zhengxi and Gao, James (2008) Engineering design knowledge management in de-centralised virtual enterprises. Computer Aided Design and Applications, 5 (6). pp. 787-800. ISSN 1686-4360 (doi:10.3722/cadaps.2008.787-800)

open-ended applicator

operating age

operation sequencing

operational modal analysis

optical arrays

optical fiber cables

optical fiber networks

optical performance

optical simulation

optically fed phase

optimization

optimum moisture content

organizational learning

orthotics

outdoor WiFi localization

overtopping

packaging

paper recycling industry

parameter estimation

participation

Gwynne, Steve (2008) Helping people on their own terms: developing inclusive emergency procedures. Fire Technology, 44 (4). pp. 439-461. ISSN 0015-2684 (doi:10.1007/s10694-007-0039-z)

particle dynamics

particle size distribution

particle size measurement

particle velocity profiles

Passive ventilation

Pb-free solder

Amalu, E.H., Lau, W.K., Ekere, N.N., Bhatti, R.S., Mallik, S., Otiaba, K.C. and Takyi, G. (2011) A study of SnAgCu solder paste transfer efficiency and effects of optimal reflow profile on solder deposits. Microelectronic Engineering, 88 (7). pp. 1610-1617. ISSN 0167-9317 (doi:10.1016/j.mee.2011.02.104)

pedestrian

pedestrian dynamics

Siddiqui, A.A. and Gwynne, S.M.V. (2012) Employing pedestrian observations in engineering analysis. Safety Science, 50 (3). pp. 478-493. ISSN 0925-7535 (doi:10.1016/j.ssci.2011.10.011)

pedestrian escalator behaviour

peer-to-peer

periodic boundary conditions

permeability evolutionary computing

personal area networks

personalised health care

personalised learning

perturbation-theory

Chen, Hua-Peng (2006) Efficient methods for determining modal parameters of dynamic structures with large modifications. Journal of Sound and Vibration, 298 (1-2). pp. 462-470. ISSN 0022-460X (doi:10.1016/j.jsv.2006.06.002)

perturbed force approach

Chen, Hua Peng (2010) Mode shape expansion using perturbed force approach. Journal of Sound and Vibration, 329 (8). pp. 1177-1190. ISSN 0022-460X (doi:10.1016/j.jsv.2009.10.027)

phased arrays

photocatalytic water oxidation

Pesci, Federico M., Cowan, Alexander J., Alexander, Bruce D., Durrant, James R. and Klug, David R. (2011) Charge carrier dynamics on mesoporous WO3 during water splitting. The Journal of Physical Chemistry Letters, 2 (15). pp. 1900-1903. ISSN 1948-7185 (Print), 1948-7185 (Online) (doi:10.1021/jz200839n)

photodiodes

photoelastic modelling

photoelasticity

Tee, Kong-Fah, Christopher, C.J., James, M.N. and Patterson, E.A. (2007) New insights into plasticity-induced crack tip shielding via mathematical modelling and full field photoelasticity. In: 10th International Conference on the Mechanical Behavior of Materials (ICM), 27-31 May 2007, Busan, Korea. (Unpublished)

photogenerated charge carriers

piezosensors

pin-loaded patches

pipejaking process

plan do check acts

plasma physics

plasma-treated hot air solder level (HASL)

plastic enclave

plasticity

plasticity-induced closure

Tee, Kong-Fah, Christopher, C.J., James, M.N. and Patterson, E.A. (2007) New insights into plasticity-induced crack tip shielding via mathematical modelling and full field photoelasticity. In: 10th International Conference on the Mechanical Behavior of Materials (ICM), 27-31 May 2007, Busan, Korea. (Unpublished)

Plaxis 3D Tunnel Program

PLM

Plytron

pneumatic conveying systems

Bradley, Michael, Farnish, Richard and Deng, Tong (2011) Predicting and preventing wear in pneumatic conveying systems. In: BulkSolids India 2011, 6-8 April 2011, Mumbai, India. (Unpublished)

pneumatic conveyor

pneumatically conveyed solids

Poisson ratio

polymers

Edussuriya, Suchitra Samanthi (2003) Computational analysis of viscoelastic free surface flows. PhD thesis, University of Greenwich.

polynomial regression

polypropylene

positioning algorithm

potential systems

powder metallurgy

power azimuth-delay spectrum (PADS)

power azimuthal spectrum (PAS)

power delay spectrum (PDS)

predicting

Bradley, Michael, Farnish, Richard and Deng, Tong (2011) Predicting and preventing wear in pneumatic conveying systems. In: BulkSolids India 2011, 6-8 April 2011, Mumbai, India. (Unpublished)

prestressed concrete

Masroor, Ahmad (1983) Bond strength history in prestressed concrete reactor vessels. PhD thesis, Thames Polytechnic.

prestressing steel

preventing wear

Bradley, Michael, Farnish, Richard and Deng, Tong (2011) Predicting and preventing wear in pneumatic conveying systems. In: BulkSolids India 2011, 6-8 April 2011, Mumbai, India. (Unpublished)

principal component analysis (PCA)

printed circuit boards (PCBs)

printed circuits

probability

probability theory

Moorman, John Everard (2005) A method for the probabilistic method assessment of structures containing defects. PhD thesis, University of Greenwich.

problem solving

process computer control

process control

process efficiency

processing technology

product

product design process

Fei, Genyuan (2011) A methodology for engineering design change analysis using system modelling and knowledge management technologies. PhD thesis, University of Greenwich.

product designers

product knowledge analysis

product life cycle management

product lifecycle management

product modelling

product planning

product service system

products and services

profit

programming and algorithm theory

project management courses

Arami, Mitra (2008) Introduction of project management courses at university: a case study. PM World Today, 10 (8).

project management education

Arami, Mitra (2008) Introduction of project management courses at university: a case study. PM World Today, 10 (8).

proof of concept

psychological reactions

Grimm, A., Hulse, L. and Schmidt, S. (2009) Risikowahrnehmung und psychologische Reaktionen in öffentlichen Krisensituationen am Beispiel von Terrorattentaten / Risk perception and psychological reactions in public crisis situations using the example of terror attacks. Bundesgesundheitsblatt - Gesundheitsforschung - Gesundheitsschutz, 52 (12). pp. 1129-1140. ISSN 1436-9990 (Print), 1437-1588 (Online) (doi:10.1007/s00103-009-0966-6)

pulse amplifiers

radial cracking

Chen, Hua Peng and Xiao, Nan (2012) Analytical solutions for corrosion-induced cohesive concrete cracking. Journal of Applied Mathematics, 25. pp. 2-25. ISSN 1110-757X (doi:10.1155/2012/769132)

radio frequency

radio over fiber

radio propagation

randomly distributed arrays

ray tracing calculations

ray-tracing (RT)

real mode

real time structural damage assessment

real-time systems

recycled

reflow profile

regeneration

Gulsen, Guler and Holden, Robert (2010) Olympics Legacy: the London Olympics 2012. Istanbul Technical University Journal of Faculty of Architecture, 7 (2). pp. 58-73. ISSN 1302-8324

regularization algorithm

regularization methods

regulations

reinforced

reinforced concrete structures

Yang, Shangtong (2010) Concrete crack width under combined reinforcement corrosion and applied load. PhD thesis, University of Greenwich.

reinforcement

reinforcement corrosion

reinforcing steel

remanufacturing and recycling technologies

remediation

remote antenna units

remote location

repair and overhaul (MRO)

repeatability

requirement management

requirements management

research profile

Pericleous, Kyriacos (2011) Computational science and the future. Public Service Review: UK Science and Technology, 4. pp. 26-27. ISSN 2046-5696 (Online) 2045-3884 (Print)

retrofit

reuse

review

rheology

Rhie-chow interpolation

Croft, Thomas Nicholas (1998) Unstructured mesh - finite volume algorithms for swirling, turbulent, reacting flows. PhD thesis, University of Greenwich.

rice

risk

risk assessment

risk perception

risk-cost optimization

roads

rocks

roof engineering

roof structures

roofs

Rossmann domain

rubbers

salinity

sandwich structures

Sarajevo

Stoppani, Teresa (2012) The architecture of the disaster. Space and Culture, 15 (2). pp. 135-150. ISSN 1206-3312 (print), 1552-8308 (electronic) (doi:doi : 10.1177/1206331211430018 )

scale-up

scheduling applications

Chen, Li Choo (2007) Optimisation of rule-based testing for scheduling within a distributed computing environment. PhD thesis, University of Greenwich.

screed

sedimentation

Bailey, Christopher John (1988) Multi phase numerical modelling of thickening and sedimentation. PhD thesis, Thames Polytechnic.

segregation

semi-automatics

sequential-hypothesis-testing framework

service life

service life prediction

service model

serviceability

shear capacities

shear connector

shear displacement

signal to noise ratio (SNR)

signal-to-noise ratio (SNR)

silos

silos bins and bunkers

simulation

Siddiqui, A.A. and Gwynne, S.M.V. (2012) Employing pedestrian observations in engineering analysis. Safety Science, 50 (3). pp. 478-493. ISSN 0925-7535 (doi:10.1016/j.ssci.2011.10.011)

Single Input Single Output (SISO)

slope deflection method

small hole

smart materials

SMARTFIRE

SMEs

social housing

software systems

Chen, Li Choo (2007) Optimisation of rule-based testing for scheduling within a distributed computing environment. PhD thesis, University of Greenwich.

soils

solder deposit

solder die attach

Otiaba, K.C., Bhatti, R.S., Ekere, N.N., Ekpu, M. and Adeyemi, J. (2011) Comparative study of the effects of coalesced and distributed solder die attach voids on thermal resistance of packaged semiconductor device. In: Collection of Papers Presented at the 17th International Workshop on THERMal INvestigation of ICs and Systems (THERMINIC' 2011). EDA Publishing Association, Grenoble, France, pp. 115-119. ISBN 9782355000188

solder joint reliability

solder paste

soldering

solders

solid gas flows

solid particle erosion

Li, Ji (2007) A study of the solid particle erosion performance of automative and other novel low carbon steels. PhD thesis, University of Greenwich.

solid state lighting

solid state lighting systems

solid state physics

Fallah, Nosrat Allah (2000) Computational stress analysis using finite volume methods. PhD thesis, University of Greenwich.

SPE

Li, Ji (2007) A study of the solid particle erosion performance of automative and other novel low carbon steels. PhD thesis, University of Greenwich.

spectrum efficiency

spreading waveforms

stabilisation / solidiﬁcation

stability (control theory)

standards

steel column base

steel corrosion

steel reinforcement corrosion

steel tube

stencil printing

STEP

STEP-NC

stiffness

stiffness matrix

storage modulus

strain-rate dependence

strategy

strength

strengthening

stress analysis

Fallah, Nosrat Allah (2000) Computational stress analysis using finite volume methods. PhD thesis, University of Greenwich.

stress intensity factor

stress level

stress singularity

structural component

structural dynamics

structural engineering

Fryer, Yvonne Delia (1993) A control volume unstructured grid approach to the solution of the elastic stress-strain equations. PhD thesis, University of Greenwich.

Masroor, Ahmad (1983) Bond strength history in prestressed concrete reactor vessels. PhD thesis, Thames Polytechnic.

structural fire engineering

structural function

structural health monitoring

structures

students’ environmental awareness

Jones, N., Panoriou, E., Thiveou, K., Roumeliotis, S., Allan, S., Clark, J.R.A. and Evangelino, K.I. (2012) Investigating benefits from the implementation of Environmental Management Systems in a Greek university. Clean Technologies and Environmental Policy. ISSN 1618-954X (Print), 1618-9558 (Online) (In Press) (doi:10.1007/s10098-011-0431-8)

substructure

supply chain management

surface mount components

surface mount packages

surface properties of materials

surface tension measurement

surgical tools

sustainability

sustainability in manufacturing

sustainable construction

Swissair

symmetric key block ciphers

SysML

system identification

system modelling

t-stress

teaching and learning

technical capacity

technical skills

technology change

terrorism

terrorism and architecture

Stoppani, Teresa (2012) The architecture of the disaster. Space and Culture, 15 (2). pp. 135-150. ISSN 1206-3312 (print), 1552-8308 (electronic) (doi:doi : 10.1177/1206331211430018 )

theoretical prediction

thermal

thermal behaviours

thermal cycling

thermal damage

thermal management

thermal performance

thermal performance of buildings

thermal processing

thermal properties

thermodynamics

Croft, Thomas Nicholas (1998) Unstructured mesh - finite volume algorithms for swirling, turbulent, reacting flows. PhD thesis, University of Greenwich.

thick-walled cylinder

Chen, Hua Peng and Xiao, Nan (2012) Analytical solutions for corrosion-induced cohesive concrete cracking. Journal of Applied Mathematics, 25. pp. 2-25. ISSN 1110-757X (doi:10.1155/2012/769132)

thickener

Bailey, Christopher John (1988) Multi phase numerical modelling of thickening and sedimentation. PhD thesis, Thames Polytechnic.

thickening

Bailey, Christopher John (1988) Multi phase numerical modelling of thickening and sedimentation. PhD thesis, Thames Polytechnic.

three dimensional representative volume elements

time domain analysis

Timoshenko beam theory

TinySec security protocol

toxicity

traffic sign recognition

transfer beam column joint

transfer efficiency

transient absorption spectroscopy

transit station

trenchless technology

triangulation

Triz

tube furnace

turning operations

two-hop decentralized wireless relay network (DWRN)

ultra wide band (UWB)

ultra wideband (UWB) breast imaging

ultra wideband technology

ultra-wideband radio frequency identification (UWB-RFID)

underground concrete pipes

underground station

uniformly distributed relay nodes

universities' environmental management system

unsaturated soil

unstructured mesh

up-link transmissions

uprating

urban noise

UWB personal area networks

velocity

Jalili, Vahid (2004) Application of CFD in designing a drug delivery mixing chamber: an experimental and computational study. PhD thesis, University of Greenwich.

velocity measurement

vertical transport devices

Kinsey, Michael Jon. (2011) Vertical transport evacuation modelling. PhD thesis, University of Greenwich.

vibration

vibration measurement

vibrations

vibroacoustics

video

viewability

virtual enterprise

virtual testing/framework

viscoelasticity

Edussuriya, Suchitra Samanthi (2003) Computational analysis of viscoelastic free surface flows. PhD thesis, University of Greenwich.

viscosity measurement

visibility

visual impact

VLSI

voids and thermal resistance

Volterra analysis

volumetric behaviour Numerical modelling

Voronoi region based approach

war

Stoppani, Teresa (2012) The architecture of the disaster. Space and Culture, 15 (2). pp. 135-150. ISSN 1206-3312 (print), 1552-8308 (electronic) (doi:doi : 10.1177/1206331211430018 )

water

Alessandri, E., Buchlin, J.M. and Patel, Mayur (1996) Numerical optimisation of water curtain barriers design. Technical Report. University of Greenwich, London. (doi:1899991166)

water model

water reactor pressure vessels

Moorman, John Everard (2005) A method for the probabilistic method assessment of structures containing defects. PhD thesis, University of Greenwich.

Export as	RSS

About GALA

Browse Contents

Guide to Depositing in GALA

For Greenwich Depositing Authors

Quick Search on GALA

Search the University website

Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General)"

5-aminomutase (OAM)

9/11

a Decode-and-Forward (DF)

access point

acoustic wave propagation

activity theory

adaptable learning

adaptive decision-making

adaptive MMSE

Adaptive Virtual Relaying MIMO (AV-RMIMO)

adenosylcobalamin (AdoCbl

adhesive

adhesives

aerospace manufacturing

aging

air pollution

air-gaps

algorithms

aluminium production

ambiguity function (AF)

amphoteric oxide

amplifier

amplify and forward

analysis

analysis and design methods

anisotropic elasticity

annular shear cell

annular wall friction tester

antenna feeds

antenna measurements

anti-segmentation system

AODV

applied load

applied mathematics

area measurement

Arge Bam

artefacts

artificial neural network

AS-System

asynchronous transmission

auger chemical analysis

authentication

automotive

automotive product development

auxetic materials

axiomatic design

axisymmetrical displacement constraint

backlight units

BAE systems

Bam

barrier design

beams

behaviour design and construction

bending

bilinear softening curve

biological system modeling

biomedical engineering

blood fluid separation

body sensor networks

bond strength

boundary element method

broadband antennas

BS 7900

building envelopes

building roof

buildingEXODUS

buildingEXODUS escalator model

buildings

bulk solids handling

burial depth

business data processing

business performance

calculation methods