Role of bonding time and temperature on the physical properties of coupled anisotropic conductive–nonconductive adhesive film for flip chip on glass technology
Rizvi, M.J., Lu, H. ORCID: 0000-0002-4392-6562, Bailey, C. ORCID: 0000-0002-9438-3879, Chan, Y.C., Lee, M.Y. and Pang, C.H. (2007) Role of bonding time and temperature on the physical properties of coupled anisotropic conductive–nonconductive adhesive film for flip chip on glass technology. Microelectronic Engineering, 85 (1). pp. 238-244. ISSN 0167-9317 (doi:https://doi.org/10.1016/j.mee.2007.05.045)
Full text not available from this repository.Abstract
Using thermosetting epoxy based conductive adhesive films for the flip chip interconnect possess a great deal of attractions to the electronics manufacturing industries due to the ever increasing demands for miniaturized electronic products. Adhesive manufacturers have taken many attempts over the last decade to produce a number of types of adhesives and the coupled anisotropic conductive-nonconductive adhesive film is one of them. The successful formation of the flip chip interconnection using this particular type of adhesive depends on, among factors, how the physical properties of the adhesive changes during the bonding process. Experimental measurements of the temperature in the adhesive have revealed that the temperature becomes very close to the required maximum bonding temperature within the first 1s of the bonding time. The higher the bonding temperature the faster the ramp up of temperature is. A dynamic mechanical analysis (DMA) has been carried out to investigate the nature of the changes of the physical properties of the coupled anisotropic conductive-nonconductive adhesive film for a range of bonding parameters. Adhesive samples that are pre-cured at 170, 190 and 210°C for 3, 5 and 10s have been analyzed using a DMA instrument. The results have revealed that the glass transition temperature of this type of adhesive increases with the increase in the bonding time for the bonding temperatures that have been used in this work. For the curing time of 3 and 5s, the maximum glass transition temperature increases with the increase in the bonding temperature, but for the curing time of 10s the maximum glass transition temperature has been observed in the sample which is cured at 190°C. Based on these results it has been concluded that the optimal bonding temperature and time for this kind of adhesive are 190°C and 10s, respectively.
Item Type: | Article |
---|---|
Additional Information: | [1] First available online: 2 June 2007. [2] Published in print: January 2008. [3] Published as: Microelectronic Engineering, (2008), Vol. 85, (1), pp. 238–244. Special issue of Microelectronic Engineering includes selected papers, with some expanded, from the 3rd International Symposium on Advanced Gate Stack Technology (ISAGST) that was held from 27-29 September 2006 in Austin, Texas, USA. |
Uncontrolled Keywords: | adhesive, curing, glass transition temperature, loss modulus, storage modulus |
Subjects: | Q Science > QA Mathematics T Technology > TA Engineering (General). Civil engineering (General) |
Pre-2014 Departments: | School of Computing & Mathematical Sciences School of Computing & Mathematical Sciences > Centre for Numerical Modelling & Process Analysis School of Computing & Mathematical Sciences > Centre for Numerical Modelling & Process Analysis > Computational Mechanics & Reliability Group School of Computing & Mathematical Sciences > Department of Computer Science School of Computing & Mathematical Sciences > Department of Computer Systems Technology School of Computing & Mathematical Sciences > Department of Mathematical Sciences |
Related URLs: | |
Last Modified: | 20 Mar 2019 11:54 |
URI: | http://gala.gre.ac.uk/id/eprint/1229 |
Actions (login required)
View Item |