Skip navigation

Stability and phase space analysis of fluidized-dense phase pneumatic transport system

Stability and phase space analysis of fluidized-dense phase pneumatic transport system

Kaur, Baldeep ORCID: 0000-0002-1762-3058, Mittal, Anu, Jana, Soumendu, Mallick, S.S. and Wypych, Peter (2018) Stability and phase space analysis of fluidized-dense phase pneumatic transport system. Powder Technology, 330. pp. 190-200. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:

PDF (Author Accepted Manuscript)
20046 KAUR_Stability_and_Phase_Space_Analysis_(AAM)_2018.pdf - Accepted Version
Available under License Creative Commons Attribution Non-commercial No Derivatives.

Download (509kB) | Preview


Fluidized dense-phase pneumatic conveying of powders is gaining popularity in several industries, such as power, chemical, cement, refinery, alumina, pharmaceutical, limestone, because of reduced gas flow rate and power consumption, decreased conveying velocities, improved product quality control, reduced pipeline sizing and wear rate, increased workplace safety etc. However, understanding the fundamental transport mechanism of fluidized dense-phase transport has only made limited progress because of the highly concentrated and turbulent nature of the gas-solids mixture. In the present work, pneumatic conveying trials were conducted with power plant fly ash (median particle diameter: 30 μm; particle density: 2300 kg/m3; loose-poured bulk density:700 kg/m3) through 69 mm I.D. × 168 m long pipeline. The mass momentum and energy balance of the system lead to the formulation of governing equations of flow for the dense-phase pneumatic conveying, which were solved using Runge-Kutta-Fehlberg (RKF45) method for different mass flow rates of fly ash and air. The stability of the system has been established corresponding to the four critical conveying parameters: pressure drop, particle and solid velocities and solid volume fraction. The linear stability analysis for the system has been established using Lyapunov's exponent method along with Hurwitz criteria. This results of stability analysis indicate a possible change in the characteristics of dunes and transport mechanisms in the direction of flow. The system experiences drop in pressure and solids volume fraction with increasing air and solids velocity. The study has been conducted at different combinations of mass flow rates of air and solids. Two- and three-dimensional phase space portraits of critical system parameters under study (pressure drop, particle velocity, gas velocity, solids volume fraction and solids friction factor) show the bistable and multi-stable operating regions for the system.

Item Type: Article
Uncontrolled Keywords: Pneumatic conveying; Dense-phase; Fine powders; Linear stability analysis; Solids friction; Phase space and Bistability
Subjects: T Technology > TA Engineering (General). Civil engineering (General)
Faculty / School / Research Centre / Research Group: Faculty of Engineering & Science
Faculty of Engineering & Science > Wolfson Centre for Bulk Solids Handling Technology
Faculty of Engineering & Science > School of Engineering (ENG)
Last Modified: 18 Sep 2020 23:35

Actions (login required)

View Item View Item


Downloads per month over past year

View more statistics