Items where Subject is "T Technology > T Technology (General)"

A

Abu-Rabie, Paul, Denniff, Philip, Spooner, Neil, Brynjolffssen, Joyce, Galluzzo, Paul and Sanders, Giles (2011) Method of applying internal standard to dried matrix spot samples for use in quantitative bioanalysis. Analytical Chemistry (including News & Features), 83 (22). pp. 8779-8786. ISSN 1520-6882 (online) (doi:10.1021/ac202321q)

Adekunle, A.A. and Woodhead, S.R. (2012) An AEAD cryptographic framework and tiny AEAD construct for secure WSN communication. In: Wireless Advanced (WiAd), 2012. IEEE Conference Publications . Institution of Electrical and Electronics Engineering, Inc., Piscataway, N.J, USA, pp. 1-5. ISBN 9781457721939 (doi:10.1109/WiAd.2012.6296560)

Aidonis, Dimitris, Manikas, Ioannis and Folinas, Dimitris (Eds.) (2010) Abstracts Proceedings of the 1st Olympus International Conference on Supply Chains (ICSC 2010). 1‐2 October 2010, Katerini, Greece. Alexander Technological Institute of Thessaloniki, Katerini, Greece.

Alam, M.O. and Bailey, C. (Eds.) (2011) Advanced adhesives in electronics, materials, properties and applications. Woodhead Publishing Limited, Cambridge, UK. ISBN 9781845695767

Alam, M.O. and Bailey, C. (2011) Introduction to adhesives joining technology for electronics. In: Advanced adhesives in electronics: Materials, properties and applications. Woodhead Publishing Limited, Cambridge, UK. ISBN 9781845695767

Alani, A., MacMullen, J., Telik, O. and Zhang, Z.Y. (2012) Investigation into the thermal performance of recycled glass screed for construction purposes. Construction and Building Materials, 29. pp. 527-532. ISSN 0950-0618 (doi:10.1016/j.conbuildmat.2011.07.020)

Ali, M. Tanseer, Wu, Ruiheng, Callaghan, Peter and Rapajic, Predrag (2011) Experimental study of a highly linear amplifier using negative impedance compensation technique. In: Proceedings of the Active RF Devices, Circuits and Systems Seminar. IET Conference Publications . Institution of Engineering and Technology, London, UK, pp. 35-38. ISBN 978-1-84919-540-9 (Online) (Unpublished) (doi:10.1049/ic.2011.0211)

Amalu, E.H, Ekere, N.N. and Aminu, G. (2011) Effects of inter-metallic compound on high temperature reliability of flip chip interconnects for fine pitch applications. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 208-213. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145173)

Anang, K.A., Rapajic, P.B., Bello, L. and Wu, R. (2012) Sensitivity of cellular wireless network performance to system and propagation parameters at carrier frequencies greater than 2 GHz. Progress In Electromagnetics Research B (PIERB), 40. pp. 31-54. ISSN 1937-6472 (doi:10.2528/PIERB12012303)

Angulo Pinzon, O.A., Bradley, Michael S.A., Berry, Rob and Farnish, Richard J. (2008) Modelling dosator filling and discharge of powder. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 586-591. ISBN 9788272062896

Antemir, Aurora, Hills, Colin D., Carey, Paula J., Gardner, Kevin H., Bates, Edward R. and Crumbie, Alison K. (2010) Long-term performance of aged waste forms treated by stabilization/solidification. Journal of Hazardous Materials, 181 (1-3). pp. 65-73. ISSN 0304-3894 (doi:10.1016/j.jhazmat.2010.04.082)

Antemir, A., Hills, C.D., Carey, P.J., Magnié, M.-C. and Polettini, A. (2010) Investigation of 4-year-old stabilised/solidified and accelerated carbonated contaminated soil. Journal of Hazardous Materials, 181 (1-3). pp. 543-555. ISSN 0304-3894 (doi:10.1016/j.jhazmat.2010.05.048)

Anthony, Richard John (2009) Policy-based autonomic computing with integral support for self-stabilisation. International Journal of Autonomic Computing, 1 (1). pp. 1-33. ISSN 1741-8569 (Print), 1741-8577 (Online) (doi:10.1504/IJAC.2009.024497)

Ariza-Zafra, K., Berry, Rob and Bradley, Michael S.A. (2008) Review of models for predicting the discharge rates of bulk particulates from silos and bins. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 484-492. ISBN 9788272062896

Aziz, Hayder, Li, Zhengxi and Gao, James (2008) Engineering design knowledge management in de-centralised virtual enterprises. Computer Aided Design and Applications, 5 (6). pp. 787-800. ISSN 1686-4360 (doi:10.3722/cadaps.2008.787-800)

Aziza-Zafra, Karol (2010) A hat trick for coal handling. International Bulk Journal, 5. pp. 67-70. ISSN 0260-1087

B

Bacon, Liz, Windall, Gillian and MacKinnon, Lachlan (2011) The development of a rich multimedia training environment for crisis management: using emotional affect to enhance learning. In: ALT-C 2011: Thriving in a colder and more challenging climate. Association for Learning Technology, Oxford, UK, pp. 67-78. ISBN 978-91-977071-4-5 (print), 978-91-977071-5-2 (online) (doi:10.3402/rlt.v19s1/7780)

Bakalis, Panos and Lawal, Bello (2010) Performance evaluation of CBR and TCP traffic models on MANET using DSR routing protocol. In: 2010 International Conference on Communications and Mobile Computing. IEEE Computer Society, Los Alamitos, CA, USA, pp. 318-322. ISBN 9780769539898 (doi:10.1109/CMC.2010.185)

Balasubramanyam, Ramkumar and Rapajic, Predrag (2008) Adaptive ‘imperfect’ decision feedback equalizer for a frequency selective communication channel. In: Proceedings of the 1st International Conference on Signal Processing and Telecommunication Systems ICSPCS'2007 Australia, Gold Coast December 17-19, 2007. DSP for Communication Systems, Tarrawanna, New South Wales, Australia, pp. 503-507. ISBN 9780975693445

Ball, Les, Baron, Sheila, Boisvert, Charles, Cooper, Richard, Essendal, Tugrul, Fincher, Sally, Jenkins, Tony, Leimich, Petra, Monger, Al, Nelson, David, Neligwa, Thomas, Paterson, James, Stanier, Clare, Valsamidis, Tony and Wilson, John (2010) A disciplinary commons for database teaching. In: 8th International Workshop on Teaching, Learning and Assessment of Databases (TLAD). Higher Education Academy, Subject Centre for ICS, Newtownabbey, County Antrim, N. Ireland, pp. 7-10. ISBN 978-0-9565220-009

Baxter, David, Doultsinou, Athanasia, Roy, Rajkumar and Gao, James (2010) A life cycle model for product-service systems design. In: 5th International Conference on Digital Enterprise Technology. Publibook, Paris, France, pp. 441-456.

Baxter, David, Gao, James, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2008) A framework to integrate design knowledge reuse and requirements management in engineering design. Robotics and Computer-Integrated Manufacturing, 24 (4). pp. 585-593. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.010)

Baxter, David, Rajkumar, Roy and Gao, James (2008) Design process knowledge reuse challenges and issues. Computer Aided Design and Applications, 5 (6). pp. 942-952. ISSN 1686-4360 (doi:10.3722/cadaps.2008.942-952)

Baxter, David, Roy, Rajkumar, Doultsinou, Athanasia, Gao, James and Kalta, Mohamad (2009) A knowledge management framework to support product-service systems design. International Journal of Computer Integrated Manufacturing, 22 (12). pp. 1073-1088. ISSN 0951-192X (Print), 1362-3052 (Online) (doi:10.1080/09511920903207464)

Bello, Lawal, Anang, Kwashie A., Bakalis, Panos, Rapajic, Predrag B. and Eneh, Titus I. (2012) Sensitivity of DSR protocol performance to propagation loss models at higher microwave frequencies. In: 2012 Proceedings 14th International Conference on Modelling and Simulation (UKSim). IEEE Conference Publications . The Institute of Electrical and Electronics Engineers, Inc, California & Washington, USA and Tokyo, Japan, pp. 561-565. ISBN 978-0-7695-4682-7 (doi:10.1109/UKSim.2012.85)

Bernasko, Peter, Mallik, Sabuj, Ekere, Ndy and Takyi, G. (2011) Evaluating the effect of pad sizes on the inter-metallic layer formation and growth for Sn-Ag-Cu solders on Cu metallization. In: International Conference on Electronics Packaging (ICEP) 2011, 13-15 April 2011, Nara Prefectural New Public Hall, Nara, Japan.

Berry, Rob, Bradley, Michael S.A., Farnish, Richard J. and Angulo Pinzon, O.A. (2008) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 344-350. ISBN 9788272062896

Bhatti, Rajinderpal and Berkhauer-Smith, Samantha (2007) Integrating both technical and cultural aspects of process improvement. In: 5th International Conference on Manufacturing Research (ICMR 2007) , 11- 13 September 2007, De Montfort University Leicester. (Unpublished)

Bhatti, Rajinderpal and Berkhauer-Smith, Samantha (2007) An integrated methodology of manufacturing business improvement strategies. In: Advances in production management systems. International Federation for Information Processing, 246 . Springer, Boston, USA, pp. 355-362. ISBN 9780387741567 (doi:10.1007/978-0-387-74157-4)

Bhatti, Rajinderpal, Chowdary, Boppana V. and Sahatoo, Divesh (2007) Some STL file generation issues in rapid prototyping. In: 5th Latin American and Caribbean Conference for Engineering and Technology Developing Entrepreneural Engineers for the Sustainable Growth of Latin American and Caribbean: Education, Innovation, Technology, and Practice. Latin American and Caribbean Consortium of Engineering Institutions, Florida. ISBN 098228960X

Bojarevics, V. and Pericleous, K. (2005) Nonlinear MHD stability of aluminium reduction cells. In: The 15th Riga and 6th PAMIRConference on Fundamental and Applied MHD. MHD-Online, Institute of Physics, University of Latvia, pp. 87-90.

Bojarevics, Valdis, Kao, Andrew and Pericleous, Koulis (2012) Modeling the fluid dynamics and dendritic solidification in EM-levitated alloy melts. In: Solidification of Containerless Undercooled Melts. Wiley-VCH Verlag & Co., Weinheim, Germany, pp. 321-348. ISBN 9783527331222

Bojarevics, Valdis and Pericleous, Kyriacos (2012) Modelling magnetically excited and magnetically damped liquid metal flow. In: CFD Modeling and Simulation in Materials. J. Wiley & Sons Inc, USA, pp. 245-252. ISBN 978-1-1182-9615-8 : 111829615X

Bojarevics, Valdis and Roy, Alan (2011) Bubble transport by electro-magnetophoretic forces at anode bottom of aluminium cells. In: Light Metals 2011. John Wiley & Sons, Inc., Hoboken, NJ, USA, pp. 549-554. ISBN 9781118029350 (print), 9781118061992 (eISBN) (doi:10.1002/9781118061992.ch97)

Bojarevics, Valdis and Roy, Alan (2011) Effect of magnetic forces on bubble transport in aluminium electrolysis cells. In: Proceedings of the 8th PAMIR International Conference on Fundamental and Applied MHD. Laboratoire CNRS-EPM/SIMaP / Institute of Physics, University of Latvia, Corsica, France, pp. 453-457.

Bradley, Michael S.A. and Berry, Rob (2007) Investigation of the effect of test procedure factors on the failure loci and derived failure functions obtained from annular shear cells. Powder Technology, 174 (1-2). pp. 60-63. ISSN 0032-5910 (doi:10.1016/j.powtec.2006.10.023)

Bradley, Michael S.A., Berry, Rob, Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia. (Unpublished)

Bradley, Michael S.A., Berry, Rob and Pillai, John (2007) Comparison between the angles of wall friction measured on an on-line wall friction tester and the Jenike wall friction tester. Powder Technology, 174 (1-2). pp. 64-70. ISSN 0032-5910 (doi:10.1016/j.powtec.2006.10.024)

Bradley, Michael S.A., Berry, Rob, Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction tester and test procedure, suitable for equipment design and powder characterisation. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)

Bradley, Michael S.A., Farnish, Richard J., Reed, Alan R. and Kulkarni, Prasanna (2007) Evaluation of air induced segregation tendencies in pharmaceutical blends using a bench scale tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)

Bradley, Michael S.A., Reed, Alan R., Berry, Rob and Holmes, C.P.M. (2008) Start-up and running forces on bulk solids feeders: experimental findings versus available models. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 450-457. ISBN 9788272062896

Bradshaw, Noel-Ann (2010) [Book Review] Thinking mathematically. MSOR Connections, 10 (3). pp. 49-50. ISSN 1473-4869

Bradshaw, Noel-Ann (2011) The University of Greenwich Maths Arcade. MSOR Connections, 11 (3). pp. 26-29. ISSN 1473-4869

Brauner, N., Finke, G., Lehoux-Lebacque, V., Rapine, C., Kellerer, H., Potts, C. and Strusevich, V. (2009) Operator non-availability periods. 4OR: A Quarterly Journal of Operations Research, 7 (3). pp. 239-253. ISSN 1619-4500 (Print), 1614-2411 (Online) (doi:10.1007/s10288-008-0084-6)

C

Callaghan, P., Sagor, M.H. and Batchelor, J.C. (2011) Control of ground plane influence on antenna radiation pattern for mobile handheld devices. In: Antennas and Propagation Conference (LAPC). IEEE Xplore Digital Library, Loughborough, UK, pp. 1-4. ISBN 978-1-4577-1014-8 ISSN 978-1-4577-1015-5 (online) (doi:10.1109/LAPC.2011.6114127)

Callaghan, Peter, Gomes, Nathan J., Batchelor, John C. and Formont, Stephane (2009) Experimental investigation of an optically fed phase array for UWB personal area networks. In: International Topical Meeting on Microwave Photonics, 2009. MWP '09. Universidad Politécnica de Valencia, Valencia, Spain. ISBN 978-1-4244-4788-6

Cemal Nat, Muesser, Walker, Simon, Bacon, Liz, Dastbaz, Mohammad and Flynn, Ryan (2011) Impact of metacognitive awareness on learning in technology enhanced learning environments. In: eTeaching and Learning Workshop, 1 Jun 2011, The University of Greenwich, London, UK. (In Press)

Cemal Nat, Muesser, Walker, Simon, Dastbaz, Mohammad and Bacon, Liz (2011) Learning design approaches for personalised and non-personalised e-learling systems. Teaching English with Technology, 11 (1). pp. 176-187. ISSN 1642-1027

Cemel Nat, Muesser, Bacon, Liz and Dastbaz, Mohammad (2009) Investigation on student modeling in adaptive e-learning systems. In: Proceedings of World Conference on E-Learning in Corporate, Government, Healthcare, and Higher Education 2009. 2009 (1). Association for Advancement of Computing in Education (ACCE), Chesapeake, VA, USA, pp. 2420-2427. ISBN 1-880094-76-2

Cemel Nat, Muesser, Walker, Simon, Bacon, Liz and Dastbaz, Mohammad (2010) Designing personalisation in LAMS. In: 2010 European LAMS & Learning Design Conference. Sharing Great Ideas . LAMS Foundation, NSW, Australia, pp. 120-127. ISBN 978-1-74138-352-2

Cetin, D., Yildirim, S. and Kilic, G. (2011) A New Approach for Determination of Adhesion Coefficient in Pipejacking Method by Experimental and Numerical Analysis: An Example from Istanbul. Experimental Techniques. pp. 1-17. ISSN 1046-6789 (doi:10.1111/j.1747-1567.2011.00764.x)

Chadwick, David, Gan, Diane and Frangiskatos, Dimitrios (2011) An educational paradigm for teaching computer forensics. In: Enhancing Employability of Computing Students. The Higher Education Academy, Information and Computer Sciences, University of Ulster at Jordanstown, UK. ISBN 9780956522030

Chang, V., Wills, G. and Walters, R.J. (2011) Towards business integration as a service 2.0 (BIaaS 2.0). In: e-Business Engineering (ICEBE), 2011. IEEE Xplore Digital Library, Beijing, pp. 341-346. ISBN 978-1-4577-1404-7 (doi:10.1109/ICEBE.2011.66)

Chapelle, Pierre, Abou-Chakra, Hadi, Christakis, Nicholas, Patel, Mayur, Abu-Nahar, Azlina, Tüzün, Ugur and Cross, Mark (2004) Computational model for prediction of particle degradation during dilute phase pneumatic conveying: the use of a laboratory scale degradation tester for the determination of degradation propensity. Advanced Powder Technology, 15 (1). pp. 13-29. ISSN 0921-8831 (doi:10.1163/15685520460740043)

Chen, Hua-Peng, Stevenson, Morris and Li, Chun-Qing (2008) Assessment of existing soakaways for reuse. Proceedings of the Institution of Civil Engineers-Water Management, 161 (3). pp. 141-149. ISSN 1741-7589 (doi:10.1680/wama.2008.161.3.141)

Chen, Yifan, Gunawan, Erry, Low, Kay Soon, Wang, Shih-Chang, Soh, Cheong Boon and Putti, Thomas Choudary (2008) Effect of lesion morphology on microwave signature in 2-D ultra-wideband breast imaging. IEEE Transactions on Biomedical Engineering, 55 (8). pp. 2011-2021. ISSN 0018-9294 (doi:10.1109/TBME.2008.921136)

Chen, Yifan, Gunawan, Erry, Low, Kay Soon, Wang, Shih-Chang, Soh, Cheong Boon and Putti, Thomas Choudary (2008) Time-reversal ultrawideband breast imaging: pulse design criteria considering multiple tumors with unknown tissue properties. IEEE Transactions on Antennas and Propagation, 56 (9). pp. 3073-3077. ISSN 0018-926X (doi:10.1109/TAP.2008.928811)

Chen, Yifan and Rapajic, Predrag (2008) Human respiration rate estimation using ultra-wideband distributed cognitive radar system. International Journal of Automation and Computing, 5 (4). pp. 325-333. ISSN 1476-8186 (doi:10.1007/s11633-008-0325-3)

Chen, Yifan and Rapajic, Predrag (2008) Ultra-wideband cognitive interrogator network for indoor location tracking. Part 1: system architecture and network performance analysis. In: 2008 IEEE 19th International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-5. ISBN 9781424426447 (doi:10.1109/PIMRC.2008.4699464)

Chen, Hua Peng, Guo, Z. and Zhou, X. (2012) Stress singularities of contact problems with a frictional interface in anisotropic bimaterials. Fatigue & Fracture of Engineering Materials & Structures. ISSN 1460-2695 (In Press) (doi:10.1111/j.1460-2695.2011.01642.x)

Chen, Hua Peng and Xiao, Nan (2012) Analytical solutions for corrosion-induced cohesive concrete cracking. Journal of Applied Mathematics, 25. pp. 2-25. ISSN 1110-757X (doi:10.1155/2012/769132)

Chen, Hua-Peng (2008) Application of regularization methods to damage detection in large scale plane frame structures using incomplete noisy modal data. Engineering Structures, 30 (11). 3219 - 3227. ISSN 0141-0296 (doi:10.1016/j.engstruct.2008.04.038)

Chen, Hua-Peng (2006) Efficient methods for determining modal parameters of dynamic structures with large modifications. Journal of Sound and Vibration, 298 (1-2). pp. 462-470. ISSN 0022-460X (doi:10.1016/j.jsv.2006.06.002)

Chen, Y. and Rapajic, P. (2010) Ultra-wideband cognitive interrogator network: Adaptive illumination with active sensors for target localisation. Communications, IET, 4 (5). pp. 573-584. ISSN 1751 8628 (doi:10.1049/iet-com.2009.0495)

Chen, Y., Zhang, Z., Hu, L. and Rapajic, P.B. (2009) Geometry-based statistical model for radio propagation in rectangular office buildings. Progress In Electromagnetics Research B, 17. pp. 187-212. ISSN 1937-6472 (doi:10.2528/PIERB09080603)

Chen, Yifan, Craddock, I.J., Kosmas, P., Ghavami, M. and Rapajic, P. (2010) Multiple-input multiple-output radar for lesion classification in ultrawideband breast imaging. IEEE Journal of Selected Topics in Signal Processing, 4 (1). pp. 187-201. ISSN 1932-4553 (doi:10.1109/JSTSP.2009.2038975)

Chen, Yifan and Rapajic, Predrag (2010) Decentralized wireless relay network channel modeling: An analogous approach to mobile radio channel characterization. IEEE Transactions on Communications, 58 (2). pp. 467-473. ISSN 0090-6778 (doi:10.1109/TCOMM.2010.02.080315)

Chen, Yifan, Yuen, Chau, Zhang, Yan and Zhang, Zhenrong (2007) Diversity gains of generalised distributed antenna systems with cooperative users. In: 2007 IEEE Wireless Communications & Networking Conference. IEEE Explore, Piscataway, NJ, USA, pp. 797-802. ISBN 1424406587 (doi:10.1109/WCNC.2007.152)

Cheung, W.M., Matthews, P.C., Gao, James and Maropoulos, Paul G. (2008) Advanced product development integration architecture: an out-of-box solution to support distributed production networks. International Journal of Production Research, 46 (12). pp. 3185-3206. ISSN 0020-7543 (doi:10.1080/00207540601039767)

Chowdhry, Babur Z., Dines, Trevor J., Leharne, Stephen A., Ryall, John P., Shadi, Iqbal T. and Withnall, Robert (2011) Vibrational spectroscopy and DFT calculations of N,N′-dicyclohexylcarbodiimide. Journal of Raman Spectroscopy, 42 (2). pp. 230-238. ISSN 0377-0486 (doi:10.1002/jrs.2674)

Christakis, Nicholas, Chapelle, Pierre, Strusevitch, Nadia, Bridle, Ian, Baxter, John, Patel, Mayur, Cross, Mark, Tüzün, Ugur, Reed, Alan R. and Bradley, Michael S.A. (2006) A hybrid numerical model for predicting segregation during core flow discharge. Advanced Powder Technology, 17 (6). pp. 641-662. ISSN 0921-8831 (doi:10.1163/156855206778917715)

Christakis, N., Wang, J., Patel, M.K., Bradley, M.S.A., Leaper, M.C. and Cross, M. (2006) Aggregation and caking processes of granular materials: continuum model and numerical simulation with application to sugar. Advanced Powder Technology, 17 (5). pp. 543-565. ISSN 0921-8831 (doi:10.1163/156855206778440480)

Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2008) Knowledge reuse in manufacturability analysis. Robotics and Computer Integrated Manufacturing, 24 (4). pp. 508-513. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.003)

Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2009) Manufacturing knowledge verification in design support systems. International Journal of Production Research, 47 (12). pp. 3179-3204. ISSN 0020-7543 (Print), 1366–588X (Online) (doi:10.1080/00207540701802452)

Coles, Anne-Marie (2011) A sustainable technological society? The role of social and technical discourse in shaping innovation. In: Rethinking Jacques Ellul and the Technological Society in the 21st Century , 17-18 June, 2011, Lisbon. (Unpublished)

Coutroubis, Alec and Beams, Rodney (2007) The use of computer based training (CBT) in the training of marine engineers. In: LMA 9th International Conference Maritime Transport and Infrastructure-2007, 19-20 April 2007, Riga, Latvia. (Unpublished)

D

Davis, J. P., Lander, K., Evans, R. and Neville, M. (2012) Facial identification from CCTV: investigating predictors of exceptional performance amongst police officers. In: European Association of Psychology and Law 2012, 10-13 Apr 2012, Nicosia, Cyprus. (Unpublished)

Davis, Josh P. and Valentine, Tim (2008) CCTV on trial: Matching video images with the defendant in the dock. Applied Cognitive Psychology, 23 (4). pp. 482-505. ISSN 0888-4080 (Print), 1099-0720 (Online) (doi:10.1002/acp.1490)

Deng, Tong, Bradley, Michael S.A., Berry, Rob and Kostuch, J. (2008) Caking strength of granulated clay under frozen conditions. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 604-609. ISBN 9788272062896

Deng, Tong, Farnish, Richard J. and Bradley, Michael S.A. (2008) Evaluation of particle degradation due to high-speed impacts in a pneumatic handling system. Particulate Science and Technology, 26 (5). pp. 438-450. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:10.1080/02726350802367522)

Deng, T., Bingley, M.S., Bradley, M.S.A. and De Silva, S.R. (2008) A comparison of the gas-blast and centrifugal-accelerator erosion testers: the influence of particle dynamics. Wear, 265 (7-8). pp. 945-955. ISSN 0043-1648 (doi:10.1016/j.wear.2008.02.017)

Dhinsa, K., Bailey, C. and Pericleous, K. (2005) Turbulence modelling for electronic cooling: A review. In: International Symposium on Electronics Materials and Packaging, EMPAS 2005. Institute of Electrical and Electronics Engineers Inc, Piscataway, USA, pp. 275-281. ISBN 1-4244-0107-0

Dhinsa, Kulvir Kaur (2006) Development and application of low Reynolds number turbulence models for air-cooled electronics. PhD thesis, University of Greenwich.

Djambazov, G., Pericleous, K., Lebon, B., Doh, Y., Jardy, A., Chapelle, P., Ghazal, G. and Gardin , P. (2012) Investigation of a possible route for oxygen transport via the metal droplets in top-blown steel converters. In: International Symposium on Liquid Metal Processing and Casting (LMPC). Wiley International, pp. 159-166. ISBN 978-1-1180-0202-5 (In Press)

Doultsinou, Athanasia, Roy, Rajkumar, Baxter, David and Gao, James (2008) Key service issues in two UK manufacturing companies from a PSS perspective. In: Proceedings of the Cranfield Multi-Strand Conference: Creating Wealth Through Research and Innovation (CMC 2008): 6-7 May 2008. Cranfield University Press, Cranfield University, pp. 287-292. ISBN 9780955743672

Doultsinou, Athanasia, Roy, Rajkumar, Baxter, David, Gao, James and Mann, Andy (2009) Developing a service knowledge reuse framework for engineering design. Journal of Engineering Design, 20 (4). pp. 389-411. ISSN 0954-4828 (Print), 1466-1837 (Online) (doi:10.1080/09544820903149354)

Duncan, Ruth (2012) Decoding the hype and fear of nanomedicines. Pharmaceutical Technology Europe, 24 (2). ISSN 1753-7967 (print), 0164-6826 (online)

Durairaj, Rajkumar, Ekere, Ndy, Salam, B., Jackson, G. and He, Da (2003) Monte Carlo study of solder paste microstructure and ultra-fine-pitch stencil printing. Journal of Materials Science: Materials in Electronics, 14 (8). pp. 501-506. ISSN 0957-4522 (doi:10.1023/A:1023929119055)

Durairaj, Rajkumar, Mallik, Sabuj and Ekere, Ndy (2008) Solder paste characterisation: towards the development of quality control (QC) tool. Soldering & Surface Mount Technology, 20 (3). pp. 34-40. ISSN 0954-0911 (doi:10.1108/09540910810885705)

Durairaj, Rajkumar, Mallik, Sabuj, Seman, Anton, Marks, Antony and Ekere, Ndy (2008) Investigation of wall-slip effect on paste release characteristic in flip-chip stencil printing process. In: 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1328-1333. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763615)

Durairaj, R., Mallik, S., Seman, A., Marks, A. and Ekere, N.N. (2008) Viscoelastic properties of solder paste and isotropic conductive adhesives used for flip-chip assembly. In: Electronic Manufacturing Technology Symposium (IEMT), 2008 33rd IEEE/CPMT International. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 1-8. ISBN 9781424433926 (print), 9781424433933 (electronic) ISSN 1089-8190 (doi:10.1109/IEMT.2008.5507801)

Dye, John V.H. and Simpson, Yvonne M. (2010) Briefing: Dividing up risk on UK defence estate works. Proceedings of the ICE - Management, Procurement and Law, 163 (1). pp. 3-6. ISSN 1751-4304 (print), 1751-4312 (online) (doi:10.1680/mpal.2010.163.1.3)

Dziedzoave, N.T., Graffham, A.J., Westby, A. and Komlaga, G. (2010) Comparative assessment of amylolytic and cellulolytic enzyme activity of malts prepared from tropical cereals. Food Control, 21 (10). pp. 1349-1353. ISSN 0956-7135 (doi:10.1016/j.foodcont.2010.04.008)

de Quincey, Ed, Kostkova, Patty and Farrell, David (2009) Visualising web server logs for a Web 1.0 audience using Web 2.0 technologies: eliciting attributes for recommendation and profiling systems. In: Proceedings of International Workshop on Adaptation and Personalization for Web 2.0 (AP-WEB 2.0 2009). CEUR Workshop Proceedings (485). CEUR-WS.org , pp. 69-78. ISSN 1613-0073

de Quincey, Ed, Kostkova, Patty and Jawaheer, Gawesh (2012) Promoting e-Health resources: lessons learned. In: Electronic Healthcare: Third International Conference, eHealth 2010. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, 69 (6) . Springer Berlin Heidelberg, Berlin, Germany, pp. 103-110. ISBN 978-3-642-23634-1 (Print), 978-3-642-23635-8 (Online) (doi:10.1007/978-3-642-23635-8_13)

E

Eadie, R. and Gao, James (2008) An industrial implementation of a methodology for the optimisation of product design tolerances. In: Advances in manufacturing technology XXII: the proceedings of the 6th International Conference on Manufacturing Research ICMR08, 9th-11th September 2008, London UK. Brunel University College, Brunel University, pp. 161-170. ISBN 9781902316604

Easter, S., Bojarevics, V. and Pericleous, K. (2011) 3D numerical modelling of liquid droplet dynamics in a high DC magnetic field. In: 8th PAMIR International Conference on Fundamental and Applied MHD, 5-9 Sep 2011, Borgo, Corsica, France .

Edussuriya, Suchitra Samanthi (2003) Computational analysis of viscoelastic free surface flows. PhD thesis, University of Greenwich.

Ekere, Ndy, Durairaj, Rajkumar, Mallik, Sabuj, Marks, Antony, Bauer, R. and Winter, M. (2006) Rheological characterisation of new lead-free solder paste formulations for flip-chip assembly. In: ESTC 2006: 1st Electronics Systemintegration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, pp. 995-1000. ISBN 1424405521 (doi:10.1109/ESTC.2006.280132)

Ekere, Ndy and Mallik, Sabuj (2008) A methodology for characterising new lead-free solder paste formulations used for flip-chip assembly applications. In: Smart processing technology: SPT '07. High Temperature Society of Japan, Ibaraki, Japan, pp. 59-64.

Ekere, Ndy, Mallik, Sabuj, Durairaj, Rajkumar and Marks, Antony (2007) A study of the rheological properties of lead free solder paste formulations used for flip-chip interconnection. In: 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. IEEE/CPM International Electronics Manufacturing Technology Symposium . IEEE, New York, USA, pp. 165-171. ISBN 9781424413355 (doi:10.1109/IEMT.2007.4417065)

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2007) Effect of abandon time on print quality and rheological characteristics for lead-free solder pastes used for flip-chip assembly. In: 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. Ieee/Cpmt International Electronics Manufacturing Technology Symposium . Institute of Electrical and Electronics Engineers , New York, USA, pp. 14-19. ISBN 9781424413355 (doi:10.1109/IEMT.2007.4417048)

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2008) Effect of long-term aging on the rheological characteristics and printing performance of lead-free solder pastes used for flip-chip assembly. Smart Processing Technology, 2. pp. 131-134.

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy, Mallik, Sabuj, Amalu, Emeka and Otiaba, Kenny (2011) Investigation of effects of heat sinks on thermal performance of microelectronic package. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 127-132. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145164)

Ermis, Ertan, Farnish, Richard J., Berry, Rob and Bradley, Michael S.A. (2008) Direct measurement of powder flavour adhesion on to a food surface using a novel adhesion tester. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 803-810. ISBN 9788272062896

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2011) Centrifugal tester versus a novel design to measure particle adhesion strength and investigation of effect of physical characteristics (size, shape, density) of food particles on food surfaces. Journal of Food Engineering, 104 (4). pp. 518-524. ISSN 0260-8774 (doi:10.1016/j.jfoodeng.2011.01.008)

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2009) Direct measurement of powder flavor adhesion onto crisp surface using a novel adhesion tester. Particulate Science and Technology, 27 (4). pp. 362-372. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:10.1080/02726350902994035)

Eze, Thaddeus O., Anthony, Richard J., Walshaw, Chris and Soper, Alan (2011) The challenge of validation for autonomic and self-managing systems. In: ICAS 2011: Seventh International Conference on Autonomic and Autonomous Systems. IARIA, pp. 128-133. ISBN 9781612081342

F

Falconer, Robert E., Boughton, B. and Paterson, F. (2010) Strengthening of masonry bridges against traffic and flooding. In: Structural Faults and Repair 2010 13th International Congress and Exhibition, 15-17 June 2010, Edinburgh.

Farnish, Richard J. (2008) Fine in the lab not equal fine for the process. The Chemical Engineer (802). pp. 36-37. ISSN 0302-0797

Farnish, Richard J., Kulkarni, Prasanna and Bradley, Michael S.A. (2008) Segregation of bulk particulates through multiple process handling steps. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 505-510. ISBN 9788272062896

Farsiya, Fathima, Vijaya, Kumar B., Shashi, Ravi Suman Rudrangi, Satish, Kumar Vemula, Prasad, Garrepally, Swathi, Chilukula and Samatha, Rudrang (2011) Formulation and evaluation of matrix-type transdermal delivery system of ondansetron hydrochloride using solvent casting technique. Research Journal of Pharmacy and Technology, 4 (5). pp. 806-814. ISSN 0974-3618 (print), 0974-360X (online)

Frangiskatos, Dimitrios, Ghassemian, Mona and Gan, Diane (2010) Technology perspective: Is green IT a threat to IT security? In: Information Security and Digital Forensics. Lecture Notes of the Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering (41). Springer, Berlin, Heidelberg, New York, pp. 147-154. ISBN 978-3-642-11529-5 ISSN 1867-8211 (doi:10.1007/978-3-642-11530-1)

Frith, Ed (2008) Rodchenko exhibition fails to cover all the angles. Building Design (1807). pp. 20-21.

G

Galea, E.R., Filippidis, L., Wang, Z., Lawrence, P.J. and Ewer, J. (2011) Evacuation analysis of 1000+ seat blended wing body aircraft configuration: computer simulations and full-scale evacuation experiment. In: Pedestrian and Evacuation Dynamics. Springer USA, pp. 149-151. ISBN 9781441997241 (Print), 9781441997258 (Online) (doi:10.1007/978-1-4419-9725-8_14)

Gao, James and Baxter, David (2008) Editorial for the special issue of RCIM for ICMR2005: Third International Conference on Manufacturing Research, Cranfield University, September 6th–9th 2005, Cranfield, UK. Robotics and Computer-Integrated Manufacturing, 24 (4). pp. 499-500. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.001)

Gao, James and Baxter, David (2007) Enabling technologies and frameworks for new product development: a selection of papers from ICMR2005. International Journal of Production Research, 45 (7). pp. 1485-1487. ISSN 0020-7543 (doi:10.1080/00207540600942201)

Gao, James, Baxter, David, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2007) An engineering design knowledge reuse methodology using process modelling. Research in Engineering Design, 18 (1). pp. 37-48. ISSN 0934-9839 (doi:10.1007/s00163-007-0028-8)

Gao, James, Baxter, David, Doultsinou, Nancy and Roy, Rajkumar (2007) Identification of service knowledge types for technical product-service systems. In: Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath, pp. 549-555.

Gao, James, Baxter, David and Roy, Rajkumar (2009) Managing knowledge within the manufacturing enterprise: an overview. International Journal of Manufacturing Technology and Management (IJMTM), 18 (2). pp. 183-209. ISSN 1368-2148 (doi:10.1504/IJMTM.2009.026193)

Gao, James, Baxter, David and Roy, Rajkumar (2007) Specifying a design life cycle knowledge reuse framework part 1: manufacturing knowledge. In: Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.

Gao, James and Bradfield, Daniel J. (2007) A methodology to facilitate knowledge sharing in the new product development process. International Journal of Production Research, 45 (7). pp. 1489-1504. ISSN 0020-7543 (doi:10.1080/00207540600942227)

Gao, James, Bradfield, Daniel J. and Soltan, Hossein (2007) Development of a tool to support the dissemination of information about knowledge in multilingual product development teams. In: Proceedings of the International conference on product lifecycle management: assessing the industrial relevance. Inderscience Enterprises Ltd, Genva Aeroport, pp. 261-270. ISBN 9780907776321

Gao, James, Bradfield, Daniel J. and Soltan, Hossein (2007) A metaknowledge approach to facilitate knowledge sharing in the global product development process. Computer-Aided Design and Applications, 4 (1-4). pp. 519-528. ISSN 1686-4360 (doi:10.3722/cadaps.2007.519-528)

Gao, James and Jian, Amanda (2007) A multi-agent based knowledge search methodology for product development. In: Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.

Gao, James and Kuang, Li (2007) A framework to integrate manufacturing information systems. In: Digital enterprise technology perspectives and future challenges. Springer, New York, pp. 369-376. ISBN 9780387498638 (doi:10.1007/978-0-387-49864-5)

Gao, James and Sharma , R. (2007) A knowledge-based manufacturing and cost evaluation system for product design/re-design. The International Journal of Advanced Manufacturing Technology, 33 (9-10). pp. 856-865. ISSN 0268-3768 (doi:10.1007/s00170-006-0530-6)

Gao, James, Zhang, Pengcheng, Baxter, David and Kalta, Mo (2007) Developing a design process model for the reuse of knowledge. In: Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.

Ghassemian, Mona, Auckburaully, Shah Fadil, Pretorius, Maria and Jai-Persad, David (2011) Remote elderly assisted living system: a preliminary research, development and evaluation. In: 2011 IEEE 22nd International Symposium on Personal, Indoor and Mobile Radio Communications. IEEE Conference Proceedings . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, 2219-2223 . ISBN 9781457713484 (doi:10.1109/PIMRC.2011.6139911)

Gordon, Valery S., Orlovich, Yury L., Potts, Chris N. and Strusevich, Vitaly A. (2011) Hamiltonian properties of locally connected graphs with bounded vertex degree. Discrete Applied Mathematics, 159 (16). pp. 1759-1774. ISSN 0166-218X (doi:10.1016/j.dam.2010.10.005)

Gordon, Valery S. and Strusevich, Vitaly A. (2009) Single machine scheduling and due date assignment with positionally dependent processing times. European Journal of Operational Research, 198 (1). pp. 57-62. ISSN 0377-2217 (doi:10.1016/j.ejor.2008.07.044)

Gururajan, B., Cote, P., Turnbull, N., Razzano, E. and Bentham, A.C. (2010) Micro scale prediction of the roller compaction process. American Pharmaceutical Review, 13 (3). ISSN 1099-8012

H

Harireche, Ouahid, Verdin, Patrick, Thompson, Chris P. and Hammond, David W. (2008) Explicit finite volume modeling of aircraft anti-icing and de-icing. Journal of Aircraft, 45 (6). pp. 1924-1936. ISSN 0021-8669 (doi:10.2514/1.34855)

Hawthorne, James, Anthony, Richard J. and Petridis, Miltos (2011) Improving the development process for teleo-reactive programming through advance composition. In: ICAS 2011: Seventh International Conference on Autonomic and Autonomous Systems. IARIA, pp. 75-80. ISBN 9781612081342

Hills, Colin (2007) Introduction to the science behind stabilisation/solidification technology. In: Stabilisation/Solidification Symposium, 29 Aug 2007, Halifax, Nova Scotia, Canada. (Unpublished)

Hossain, M., Wu, Ruiheng, Litchfield, Charan and Rapajic, Predrag (2008) Linearization of high frequency amplifier using a generalised signal-injection method: case study. In: Analog Signal Processing Conference 2008 , 12 November 2008, Oxford Brookes University, Oxford, UK. (Unpublished)

Hu, Luo-quan, Zhu, Hong-bo and Chen, Yifan (2009) Probability distribution of stochastic rays and its applications. Journal of Electronics & Information Technology, 31 (6). pp. 1405-1409. ISSN 1009-5896 (doi:10.3724/SP.J.1146.2007.01018)

I

Islam, J. and Ghassemian, M. (2010) XOR based multiple-criteria broadcasting in Mobile Ad Hoc Networks. In: IEEE Conference on Computer Communications Workshops. IEEE INFOCOM 2010 . Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ 08854, pp. 1-2. ISBN 978-1-4244-6739-6 (electronic), 978-1-4244-6739-6 (print) (doi:10.1109/INFCOMW.2010.5466688)

K

Kanakis, Triantafyllos and Rapajic, Predrag B. (2008) Radio propagation modeling for capacity optimization in wireless relay MIMO systems with partial CSI. In: 2008 IEEE 10th International symposium on spread spectrum techniques and applications. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 211-215. ISBN 9781424422036 (doi:10.1109/ISSSTA.2008.44)

Kao, D, Pericleous, Koulis A., Graham, Deryn and Knight, Brian (2006) Use of a coupled mechanical-acoustic computational model to identify failure mechanisms in paper production. In: Proceedings of the Thirteenth International Congress on Sound and Vibration, ICSV13 , 2-6 Jul 2006, Vienna, Austria.

Kao, A. and Pericleous, K. (2012) Using thermoelectric magnetohydrodynamics to control microstructural evolution. In: Modeling of Casting, Welding and Advanced Solidification Processes 2012 (MCWASP XIII). IOP Conference Series: Materials Science and Engineering (33). IOP Publishing, Bristol, UK, pp. 1-8. ISSN 1757-899X (doi:10.1088/1757-899X/33/1/012045)

Kao, A. and Pericleous, K. (2011) The effect of secondary arm growth on thermoelectric magnetohydrodynamics. In: 8th PAMIR International Conference on Fundamental and Applied MHD, 5-9 September 2011, Borgo, Corsica. (Submitted)

Kao, D., Graham, D., Knight, B., Pericleous, K. and Patel, M.K. (2006) Identifying the damage mechanisms in paper using the acoustic emission monitoring technique. In: Proceedings of the 5th International Conference on Engineering Computational Technology. Civil-Comp Press, Kippen, Stirlingshire, United Kingdom. ISBN 1-905088-11-6 ISSN 1759-3433

Kapetanakis, Stelios, Petridis, Miltos, Ma, Jixin, Knight, Brian and Bacon, Liz (2011) Enhancing similarity measures and context provision for the intelligent monitoring of business processes in CBR-WIMS. In: 19th International Conference on Case Based Reasoning: Workshop 1 - Process-oriented Case-Based Reasoning (PO-CBR), 12-15 September 2011, Greenwich, London. (Submitted)

Kazimoglu, Cagin, Kiernan, Mary and Bacon, Liz (2010) Enchanting e-learning through the use of an interactive feedback loop in digital games. In: 3rd Conference on Human System Interactions (HSI), 2010. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 502-509. ISBN 978-1-4244-7560-5 (doi:10.1109/HSI.2010.5514523)

Kazimoglu, Cagin, Kiernan, Mary, Bacon, Liz and MacKinnon, Lachlan (2010) Developing a game model for computational thinking and learning traditional programming through game-play. In: Proceedings of the World Conference on E-learning in Corporate, Government, Healthcare and Higher Education 2010. AACE, Chesapeake, USA, pp. 1378-1386. ISBN 1-880094-83-5

Kellerer, Hans, Kubzin, Mikhail A. and Strusevich, Vitaly A. (2009) Two simple constant ratio approximation algorithms for minimizing the total weighted completion time on a single machine with a fixed non-availability interval. European Journal of Operational Research, 199 (1). pp. 111-116. ISSN 0377-2217 (doi:10.1016/j.ejor.2008.11.003)

Kiernan, Mary (2009) Designing on-line courses for self-led teams. In: Proceedings of World Conference on Educational Multimedia, Hypermedia and Telecommunications 2009. Association for the Advancement of Computing in Education (AACE), Chesapeake, VA, USA, pp. 2894-2899. ISBN 1-880094-73-8

Kinsey, Michael J., Galea, Edwin R. and Lawrence, Peter J. (2012) Modelling evacuation using escalators: a London Underground dataset. In: PED 2012: 6th International Conference on Pedestrian and Evacuation Dynamics. Springer-Verlag, Berlin / Heidelberg .

Kosmas, P., Laranjeira, S., Dixon, J.H., Li, X. and Chen, Y. (2010) Time reversal microwave breast imaging for contrast-enhanced tumor classification. In: Engineering in Medicine and Biology Society (EMBC), 2010 Annual International Conference of the IEEE. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 708-711. ISBN 978-1-4244-4123-5 (print) ISSN 1557-170X (online) (doi:10.1109/IEMBS.2010.5626158)

Kountouriotis, Z., Pericleous, K., Djambazov, G., Domgin, J.F. and Gardin, P. (2011) Experimental and numerical investigation of the transient meniscus behaviour in a continuous caster. In: 7th European Conference on Continuous Casting (ECCC 2011) , 27 June - 1st July 2011, Dusseldorf, Germany. (Unpublished)

Kountouriotis, Z., Pericleous, K., Djambazov, G., Domgin, J.F. and Gardin, P. (2012) Study of the stell/slag interface instability and the influence of injected gas in the continuous casting of steel. In: Proceedings of the 8th international conference on CFD in the oil & gas, metallurgical and process industries. E SINTEF research reports . SINTEF, Norway. ISBN 9788214052626

Krusevac, Snezana M., Rapajic, Predrag and Kennedy, Rodney A. (2006) Mutual coupling effect on thermal noise in multi-element antenna systems. Progress in Electromagnetics Research, 59. pp. 325-333. ISSN 1070-4698 (doi:10.2528/PIER05091103)

Krusevac, Zarko B., Rapajic, Predrag and Kennedy, Rodney A. (2008) Mutual information performance of differential MPSK detection over time-varying channels. In: Proceedings - 2008 IEEE International Symposium on Information Theory, ISIT 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 2752-2756. ISBN 9781424422562

Krusevac, Z.B., Rapajic, P.B. and Kennedy, R.A. (2008) Communication system model for information rate evaluation of differential detection over time-varying channels. IET Communications, 2 (10). pp. 1301-1310. ISSN 1751-8628 (doi:10.1049/iet-com:20070610)

Kubzin, Mikhail A., Potts, Chris N. and Strusevich, Vitaly A. (2009) Approximation results for flow shop scheduling problems with machine availability constraints. Computers & Operations Research, 36 (2). pp. 379-390. ISSN 0305-0548 (doi:10.1016/j.cor.2007.10.013)

L

Lai, Choi-Hong (2010) On transformation methods and the induced parallel properties for the temporal domain. In: Substructuring Techniques and Domain Decomposition Methods. Computational Science, Engineering & Technology Series, 3 (24). Saxe-Coburg, Stirlingshire, UK, pp. 45-70. ISBN 978-1-874672-33-3 (doi:DOI: 10.4203/csets.24.3)

Le, C.H., Okereke, M.I., Nguyen, V.H., Dao, V.D., Soe, S., Zlatov, N. and Le, T.H. (2011) Personalised medical product development: Methods, challenges and opportunities. Romanian Review Precision Mechanics, Optics and Mechatronics, 40. pp. 11-20. ISSN 1584-5982

Leakey, Roger, Kranjac-Berisavljevic, Gordana, Caron, Patrick, Craufurd, Peter, Martin, Adrienne, McDonald, Andy, Abedini, Walter, Afiff, Suraya, Bakurin, Ndey, Bass, Steve, Hilbeck, Angelika, Jansen, Tony, Lhaloui, Saadia, Lock, Karen, Newman, James, Primavesi, Odo and Sengooba, Teresa (2009) Impacts of AKST on development and sustainability goals. In: Agriculture at the Crossroads: International Assessment of Agricultural Knowledge, Science and Technology for Development - Global Report. Island Press / The Center for Resource Economics, Washington, DC, USA, pp. 145-255. ISBN 9781597265386

Leaper, M.C., Bradley, Michael S.A., Cleaver, J.A.S., Bridle, Ian, Reed, Alan R., Abou-Chakra, H. and Tüzün, Ugur (2002) Constructing an engineering model for moisture migration in bulk solids as a prelude to predicting moisture migration caking. Advanced Powder Technology, 13 (4). pp. 411-424. (doi:10.1163/156855202320536043)

Li, Chun-Qing, Mackie, Robert Ian and Lawanwisut, Wimon (2007) A risk-cost optimized maintenance strategy for corrosion-affected concrete structures. Computer-Aided Civil and Infrastructure Engineering, 22 (5). pp. 335-346. ISSN 1093-9687 (doi:10.1111/j.1467-8667.2007.00490.x)

Li, Chun-Qing and Shao, L. (2007) Reliability based asset management strategy for concrete infrastructure. International Journal of Materials and Structural Reliability, 5 (1). pp. 13-28.

Li, Chun-Qing, Yang, Yang and Melchers, Robert E. (2008) Prediction of reinforcement corrosion in concrete and its effects on concrete cracking and strength reduction. ACI Materials Journal, 105 (1). pp. 3-10. ISSN 0889-325X

Li, Chun-Qing, Zheng, J.J., Lawanwisut, Wimon and Melchers, Robert E. (2007) Concrete delamination caused by steel reinforcement corrosion. Journal of Materials in Civil Engineering, 19 (7). pp. 591-600. ISSN 0899-1561 (doi:10.1061/(ASCE)0899-1561(2007)19:7(591))

Li, Chun-Qing, Melchers, Robert E., Davidson, Mark and Yang, Shangtong (2008) Condition assessment of a 63-year old reinforced concrete structure exposed to the North Sea. In: Conference on Durability of Building Materials and Components (11DBMC) "Globality and Locality in Durability", 11-14 May 2008, Istanbul, Turkey. (Unpublished)

Loukas, Georgios and Öke, Gülay (2010) Protection against denial of service attacks: a survey. The Computer Journal, 53 (7). pp. 1020-1037. ISSN 0010-4620 (Print), 1460-2067 (Online) (doi:10.1093/comjnl/bxp078)

Lushchakova, Irina N. and Strusevich, Vitaly A. (2010) Scheduling incompatible tasks on two machines. European Journal of Operational Research, 200 (2). pp. 334-346. (doi:10.1016/j.ejor.2009.01.029)

M

Ma, Chaoying, Caldera, Andrea, Petridis, Miltos, Bacon, Liz and Windall, Gill (2010) Integration of BPM systems. In: Process Management. Intech, Vukovar, Croatia, pp. 197-222. ISBN 978-953-307-085-8

MacKinnon, Lachlan and Bacon, Liz (2011) Remodelling computer science education to develop metacognitive adult learners. In: ALT-C 2011 18th International Conference (Association for Learning Technology), 6-8 September, 2011, University of Leeds, UK.

MacKinnon, Lachlan, Bacon, Liz and Major, Elaine (2011) Improving student employability using active portfolio - the GWizards approach. In: ALT-C 2011 18th International Conference (Association for Learning Technology), 6-8 September, 2011, University of Leeds, UK.

Mallik, Sabuj, Ekere, Ndy, Durairaj, Rajkumar and Marks, Antony (2008) An investigation into the rheological properties of different lead-free solder pastes for surface mount applications. Soldering & Surface Mount Technology, 20 (2). pp. 3-10. ISSN 0954-0911 (doi:1108/09540910810871511)

Mallik, Sabuj, Ekere, Ndy, Marks, Antony, Seman, Anton and Durairaj, Rajkumar (2008) Modelling of the time-dependent flow behaviour of lead-free solder pastes used for flip-chip assembly applications. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 1219-1224. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684527)

Mallik, Sabuj, Schmidt, M., Bauer, R. and Ekere, Ndy (2008) Influence of solder paste components on rheological behaviour. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, USA, pp. 1135-1140. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684512)

Mallik, A., Stoyanov, S., Bailey, C. and Firth, P. (2009) Design for reliability methodology for micro laser welding of pigtail fibres. In: Thermal, Mechanical and Multi-Physics simulation and Experiments in Microelectronics and Microsystems. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-7. ISBN 978-1-4244-4161-7 (electronic), 978-1-4244-4160-0 (print) (doi:10.1109/ESIME.2009.4938409)

Mallik, Sabuj and Ekere, Ndy (2011) Investigating the effects of area ratio and aspect ratio on stencil printing process used in the electronics assembly line. In: International Conference on Electronics Packaging (ICEP) 2011, 13-15 April 2011, Nara Prefectural New Public Hall, Nara, Japan.

Maniruzzaman, M., Boateng, J. and Douroumis, D. (2011) Taste masking of bitter APIs by using hot melt extrusion (HME). In: AAPS Journal. American Association of Pharmaceutical Sciences, Arlington, VA, USA, T3273-T3273. ISSN 1550-7416 (on-line)

Mann, Tony (2011) Ideas exchange: HE mathematics curriculum innovation. MSOR Connections, 11 (3). pp. 54-55. ISSN 1473-4869

Marks, A.E., Mallik, S., Ekere, N.N. and Seman, A. (2008) Effect of temperature on slumping behaviour of lead-free solder paste and its rheological simulation. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 829-832. ISBN 97814244-28137 (Print), 978-1-4244-2814-4 (Electronic) (doi:10.1109/ESTC.2008.4684459)

Mayur, Yaul, Bhatti, Rajinderpal and Lawrence, Stephen (2008) Evaluating the process of borosilicate glass capillaries used for fabrication of in-vitro fertilization (IVF) micro-pipettes. Biomedical Microdevices, 10 (1). pp. 123-128. ISSN 1387-2176 (doi:10.1007/s10544-007-9117-8)

Mejasson, Patrick, Petridis, Miltos, Knight, Brian, Soper, Alan and Norman, Phil (2001) Intelligent design assistant (IDA): a case base reasoning system for material and design. Materials and Design, 22 (3). pp. 163-170. ISSN 0261-3069 (doi:10.1016/S0261-3069(00)00066-2)

Melchers, Robert E., Li, Chun-Qing and Lawanwisut, Wimon (2008) Probabilistic modeling of structural deterioration of reinforced concrete beams under saline environment corrosion. Structural Safety, 30 (5). pp. 447-460. ISSN 0167-4730 (doi:10.1016/j.strusafe.2007.02.002)

Molaei, M., Pericleous, K.A. and Patel, M.K. (2012) Modelling and CFD simulation of a fluidized bed reactor to capture CO2 by solid sorbents. In: Proceedings of the 8th International Conference on CFD in the oil & gas, metallurgical and process industries. E SINTEF research reports, A22601 . SINTEF, Trondheim, Norway. ISBN 9788214052626 (Print), 9788251928113 (Electronic)

Molaei, M., Pericleous, K.A. and Patel, M.K. (2012) Modelling and CFD simulation of a fluidizes bed reactor to capture CO2 by solid sorbents. In: Proceedings of the 8th international conference on CFD in the oil & gas, metallurgical and process industries. SINTEF, Norway.

Mountney, S.L., Gao, James and Wiseall, S. (2007) A knowledge system to support manufacturing knowledge during preliminary design. International Journal of Production Research, 45 (7). pp. 1521-1537. ISSN 0020-7543 (doi:10.1080/00207540600942300)

Musallam, M., Johnson, C.M., Yin, Chunyan, Bailey, Christopher and Mermet-Guyennet, M. (2010) Real-time life consumption power modules prognosis using on-line rainflow algorithm in metro applications. In: Energy Conversion Congress and Exposition (ECCE), 2010 IEEE. IEEE Xplore Digital Library, Atlanta GA, pp. 970-977. ISBN 978-1-4244-5286-6 (print) ISSN 978-1-4244-5287-3 (online) (doi:10.1109/ECCE.2010.5617883)

Musallam, M., Johnson, C.M., Yin, Chunyan, Lu, Hua and Bailey, C. (2009) Real-time comparison of power module failure modes under in-service conditions. In: 2009 13th European Conference on Power Electronics and Applications, EPE '09. Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ, USA, pp. 1-10. ISBN 978-90-75815-13-9 (electronic), 978-1-4244-4432-8 (print)

N

Nijsure, Y., Chen, Y., Rapajic, P., Yuen, C., Chew, Y.H. and Qin, T.F. (2010) Information-theoretic algorithm for waveform optimization within ultra wideband cognitive radar network. In: International Conference on Ultra-Wideband (ICUWB). IEEE International Conference on Ultra-Wideband (ICUWB) . IEEE Xplore Digital Library, Nanjing, pp. 1-4. ISBN 978-1-4244-5305-4 (print) ISSN 978-1-4244-5306-1 (online) (doi:10.1109/ICUWB.2010.5616308)

Nijsure, Y., Chen, Yifan, Litchfield, C. and Rapajic, P.B. (2009) Hidden Markov model for target tracking with UWB radar systems. In: Personal, Indoor and Mobile Radio Communications. Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ, USA, pp. 2065-2069. ISBN 978-1-4244-5123-4 (online), 978-1-4244-5122-7 (print) (doi:10.1109/PIMRC.2009.5450337)

Nijsure, Y., Litchfield, C., Chen, Yifan and Rapajic, P.B. (2009) Vector precoding scheme for multi-user MIMO systems. In: Vehicular Technology Conference Fall (VTC 2009-Fall). Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ, USA, pp. 1-5. ISBN 978-1-4244-2514-3 (print), 978-1-4244-2515-0 (electronic) ISSN 1090-3038 (doi:10.1109/VETECF.2009.5378987)

Nikolaou, Ioannis E., Evangelinos, Konstantinos I. and Allan, S. (2011) A reverse logistics social responsibility evaluation framework based on the triple bottom line approach. Journal of Cleaner Production. ISSN 0959-6526 (In Press) (doi:10.1016/j.jclepro.2011.12.009)

Nyangon, Maurice (2010) The ICT gender imbalance in schools and beyond: missed opportunities. EdD thesis, University of Greenwich.

O

Okereke, Michael I., Buckley, C.P. and Siviour, C.R. (2012) Compression of polypropylene across a wide range of strain rates. Mechanics of Time-Dependent Materials. ISSN 1385-2000 (Print), 1573-2738 (Online) (In Press) (doi:10.1007/s11043-012-9167-z)

Orchard, John and Tortoe, Charles (2006) Microstructural changes of osmotically dehydrated tissues of apple, banana, and potato. Scanning, 28 (3). pp. 172-178. ISSN 0161-0457 (doi:10.1002/sca.4950280306)

Otiaba, K.C., Ekere, N.N., Bhatti, R.S., Mallik, S. and Amalu, E.H. (2011) Emerging nanotechnology-based thermal interface materials for automotive electronic control unit application. In: Microelectronics and Packaging. Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ, USA, pp. 1-8. ISBN 978-1-4673-0694-2 (print)

P

Pang, Jiayun, Li, Xin, Morokuma, Keiji, Scrutton, Nigel S. and Sutcliffe, Michael J. (2012) Large-scale domain conformational change is coupled to the activation of the Co–C bond in the B12-dependent enzyme ornithine 4,5-aminomutase: A computational study. Journal of the American Chemical Society, 134 (4). pp. 2367-2377. ISSN 0002-7863 (Print), 1520-5126 (Online) (doi:10.1021/ja210417k)

Pelc, M. (2011) A framework for verification of context-aware policy-supervised autonomic systems. Polish Journal of Environmental Studies, 20 (5A). ISSN 1230-1485

Pelc, Mariusz (2011) Application of agile policies to the problem of features interaction prevention. Polish Journal of Environmental Studies, 20 (5A). pp. 118-122. ISSN 1230-1485

Pericleous, K., Doh, Y., Djambazov, G., Lebon, G., Gardin, P., Chapelle, P., Jardy, A. and Gauthier, S. (2011) Towards the development of a complete model of the BOF converter. In: 4th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking, within the METEC InSteelCon 2011 Congress, 27 Jun - 1st Jul 2011, Dusseldorf, Germany.

Pericleous, K., Lebon, B., Djambazov, G. and Patel, M. (2012) Mathematical modelling of a compressible oxygen jet interfacing with a free surface in a basic oxygen furnace for steel production. In: CFD Modeling and Simulation in Materials Processing. J. Wiley & Sons, Inc., USA, pp. 287-295. ISBN 978-1-11829-615-8

Pericleous, K.A, Molaei, M. and Patel, M.K. (2012) CO2 removal from industrial off-gas streams by fluidized bed carbonation. In: Energy Technology 2012: Carbon Dioxide Management and Other Technologies. J. Wiley & Sons, Inc., USA, pp. 39-46. ISBN 978-1-1182-9138-2

Pericleous, Kyriacos, Djambazov, Georgi, Yuan, Lang, Ward, Mark and Lee, Peter D. (2012) A multi-scale 3D model of the vacuum arc remelting process. In: 2012 TMS Supplemental Proceedings: Materials Properties, Characterization, and Modeling. J. Wiley & Sons Inc, USA, pp. 291-298. ISBN 978-1-11829-609-7

Peter, S., MacKinnon, L., Bacon, E. and Dastbaz, M. (2011) Tagging learning objects in Moodle for personalisation and re-use. In: Proceedings of World Conference on Educational Multimedia, Hypermedia and Telecommunications 2011. Association for the Advancement of Computing in Education, Chesapeake, VA, USA, pp. 2259-2266. ISBN 1-880094-85-X

Piorkowski, Barry, Gao, James and Evans, Richard (2011) A case-study: finding references to product development knowledge from analysis of face-to-face meetings. In: Glocalized Solutions for Sustainability in Manufacturing Proceedings of the 18th CIRP International Conference on Life Cycle Engineering. Springer, New York, USA, pp. 564-569. ISBN 978-3642196911 (doi:10.1007/978-3-642-19692-8-98)

Piterou, Athina and Steward, Fred (2010) A network perspective on sociotechnical transitions: the print-on-paper sociotechnical system. In: EASST Conference: Practising Science and Technology, Performing the Social, 2-4 September 2010, University of Trento, Italy. (Unpublished)

Potts, C. N. and Strusevich, V. A. (2009) Fifty years of scheduling: a survey of milestones. Journal of the Operational Research Society, 60 (S1). S41-S68. ISSN 0160-5682 (Print), 1476-9360 (Electronic) (doi:10.1057/jors.2009.2)

Potts, Rebecca J and Davis, Josh P (2012) The effect of eye-closure on accuracy of verbal description and subsequent face recognition. In: British Psychological Society Annual Conference 2012, 18-20 Apr 2012, London, UK.

Pretorius, M., Ghassemian, M. and Ierotheou, C. (2011) Virtualisation - securing a greener tomorrow with yesteryear's technology. In: Proceedings of the 12th IFIP/IEEE International Symposium on Integrated Network Management (IM 2011), May 2011. IEEE Conference Publications . Insitute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 760-772. ISBN 978-1-4244-9219-0 (Print), 978-1-4244-9220-6 (Online) (doi:10.1109/INM.2011.5990599)

Pretorius, M., Ghassemian, M. and Ierotheou, C. (2010) An investigation into energy efficiency of data centre virtualisation. In: Proceedings International Conference on P2P, Parallel, Grid, Cloud and Internet Computing 3PGCIC 2010. IEEE Conference Publications . The Institute of Electrical and Electronics Engineers, Inc., CA and NJ, USA. Tokyo, Japan, pp. 157-163. ISBN 978-0-7695-4237-9 (doi:10.1109/3PGCIC.2018.28)

Q

Qureshi, A., Kanakis, T. and Rapajic, P. (2010) Adaptive signal combining with unequal channel noise variances. International Journal of Simulation: Systems, Science and Technology, 11 (6). pp. 14-21. ISSN 1473 804x (online), 1473 8031 (print)

R

Ramesh, Nadarajah (2011) Impact of audience response system in first year statistics lessons: click or not to click. MSOR Connections, 11 (2). pp. 29-31. ISSN 1473-4869

Ramesh, Nadarajah (2011) Use of technology to enhance teaching and learning in mathematics and statistics. MSOR Connections, 11 (1). pp. 34-36. ISSN 1473-4869

Rapajic, Predrag, Kabir, Ahsanul, Huang, Kao-Cheng and Wu, Ruiheng (2007) Next generation identity card: RFID-based automatic access control system for universities. In: Selected Topics on Circuits, Systems, Electronics, Control & Signal Processing: Proceedings of the 6th WSEAS International Conference on Circuits, Systems, Electronics, Control & Signal Processing. Electrical and Computer Engineering . WSEAS Press, Singapore, pp. 480-483. ISBN 9789606766282

Rapajic, Predrag and Kanakis, Triantafyllos (2008) MIMO relay channels with partial channel knowledge/estimation error and spatial correlation. In: Proceedings of the 1st International Conference on Signal Processing and Telecommunication Systems ICSPCS'2007 Australia, Gold Coast December 17-19, 2007. DSP for Communication Systems, Tarrawanna, New South Wales, Australia, pp. 43-47. ISBN 9780975693445

Rapajic, Predrag, Kennedy, Rodney A. and Krusevac, Snezana M. (2007) Effect of signal and noise mutual coupling on MIMO channel capacity. Wireless Personal Communications, 40 (3). pp. 317-328. ISSN 0929-6212 (doi:10.1007/s11277-006-9193-8)

Rapajic, Predrag and Krusevac, Zarko B. (2008) Equivalent channel for capacity analysis of differential detection over time-varying communication channels. In: Proceedings of the 1st International Conference on Signal Processing and Telecommunication Systems ICSPCS'2007 Australia, Gold Coast December 17-19, 2007. DSP for Communication Systems, Tarrawanna, New South Wales, Australia, pp. 21-26. ISBN 9780975693445

Rapajic, Predrag, Liu, Yang, Kennedy, Rodney A. and Sadeghi, Parastoo (2008) Pilot symbol transmission for time-varying fading channels: an information-theoretic optimization. In: Proceedings of the 1st International Conference on Signal Processing and Telecommunication Systems ICSPCS'2007 Australia, Gold Coast December 17-19, 2007. DSP for Communication Systems, Tarrawanna, New South Wales, Australia, pp. 34-42. ISBN 9780975693445

Rezania, Mohammad, Faramarzi, Asaad and Javadi, Akbar A. (2011) An evolutionary based approach for assessment of earthquake-induced soil liquefaction and lateral displacement. Engineering Applications of Artificial Intelligence, 24 (1). pp. 142-153. ISSN 0952-1976 (doi:10.1016/j.engappai.2010.09.010)

Rizvi, M.J., Lu, H., Bailey, C., Bevan, E., Poutney, N. and Coates, J. (2010) Finite element modelling of failures in thick film chip resistor solder joints. In: Microsystems Packaging Assembly and Circuits Technology Conference (IMPACT), 2010. in: Microsystems Packaging Assembly and Circuits Technology Conference (IMPACT), 2010 5th International Issue Date: 20-22 Oct. 2010 . IEEE Xplore Digital Library, Taipei, pp. 1-4. ISBN 978-1-4244-9785-0 (electronic), 978-1-4244-9783-6 (print) ISSN 2150-5934 (doi:10.1109/IMPACT.2010.5699488)

Robinson, J.P., Kingman, S.W., Snape, C.E., Barranco, R., Shang, H. and Bradley, M.S.A. (2009) Remediation of oil-contaminated drill cuttings using continuous microwave heating. Chemical Engineering Journal, 152 (2-3). pp. 458-463. ISSN 1385-8947 (doi:10.1016/j.cej.2009.05.008)

Robinson, R., Kingman, S., Snape, C., Bradley, M., Bradshaw, S., Thomas, D. and Page, P. (2009) Microwave treatment of oil-contaminated drill cuttings at pilot scale. SPE Drilling and Completion, 24 (3). pp. 430-435. ISSN 1064-6671 (print), 1930-0204 (online) (doi:10.2118/111637-PA)

Ronchi, E., Gwynne, S.M.V., Purser, D.A. and Colonna, P. (2012) Representation of the impact of smoke on agent walking speeds in evacuation models. Fire Technology. ISSN 0015-2684 (print), 1572-8099 (electronic) (In Press) (doi:10.1007/s10694-012-0280-y)

Ronchi, E. and Kinsey, Michael (2011) Evacuation models of the future: insights from an online survey of user's experiences and needs. In: Advanced Research Workshop: Evacuation and Human Behavior in Emergency Situations, 21 Oct 2011, Santander, Spain. (Unpublished)

Rustogi, Kabir and Strusevich, Vitaly A. (2012) Single machine scheduling with general positional deterioration and rate-modifying maintenance. Omega (International Journal of Management Science), 40 (6). 791–-804. ISSN 0305-0483 (doi:10.1016/j.omega.2011.12.007)

S

Sadeghi, Parastoo and Rapajic, Predrag (2008) On information rates of time-varying fading channels modeled as finite-state Markov channels. IEEE Transactions on Communications, 56 (8). pp. 1268-1278. ISSN 0090-6778 (doi:10.1109/TCOMM.2008.060622)

Sahatoo, Divesh, Chowdary, Boppana V., Ali, Fahraz F. and Bhatti, Rajinderpal (2008) Slicing issues in CAD translation to STL in rapid prototyping. In: Proceedings of The 2008 IAJC-IJME International Conference. International Association of Journals and Conferences/International Journal of Modern Engineering, California State University, Northridge. ISBN 9781606433799

Salam, B. and Ekere, Ndy (2006) A study of inter-metallic compounds (IMC) formation and growth in ultra-fine pitch Sn-Ag-Cu lead-free solder joints. In: ESTC 2006: 1st Electronics Systemintegration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, pp. 988-994. ISBN 1424405521 (doi:10.1109/ESTC.2006.280131)

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) Development of an in-situ, non-destructive ultrasonic monitoring technique for solder pastes. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 209-214. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684351)

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) In-situ non-destructive ultrasonic rheology technique for monitoring different lead-free solder pastes for surface mount applications. In: 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1448-1454. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763635)

Shang, X., Wang, Y., Nicholson, G.L. and Lancaster, M.J. (2012) Design of multiple-passband filters using coupling matrix optimisation. IET Microwaves, Antennas & Propagation, 6 (1). pp. 24-30. ISSN 1751-8725 (Print), 1751-8733 (Online) (doi:10.1049/iet-map.2011.0261)

Shuaib, Haffiz, Anthony, Richard J. and Pelc, Mariusz (2012) A framework for certifying autonomic computing systems. In: Seventh International Conference on Autonomic and Autonomous Systems. Curran Associates Inc., Red Hook, NY, USA, pp. 122-127. ISBN 9781612080062

Siddiqui, A.A. and Gwynne, S.M.V. (2012) Employing pedestrian observations in engineering analysis. Safety Science, 50 (3). pp. 478-493. ISSN 0925-7535 (doi:10.1016/j.ssci.2011.10.011)

Sinha, A., Mihailovic, J.A., Morris, J.E., Hua, Lu and Bailey, C. (2010) Modeling thermal conductivity and CTE for CNT-Cu composites for 3-D TSV application. In: Nanotechnology Materials and Devices Conference (NMDC), 2010 IEEE. Nanotechnology Materials and Devices Conference (NMDC), 2010 IEEE . IEEE Xplore Digital Library, Monterey, CA, pp. 262-266. ISBN 978-1-4244-8896-4 (doi:10.1109/NMDC.2010.5652157)

Steward, Fred, Tsoi, Joyce and Coles, Anne-Marie (2008) Innovation and sustainability in print-on-paper: a comparison of nanoparticle and deinking niches as emergent sociotechnical networks. Journal of Cleaner Production, 16 (8/9). pp. 957-966. ISSN 0959-6526 (doi:10.1016/j.jclepro.2007.04.008)

Steward, Fred, Tsoi, Joyce and Coles, Anne-Marie (2006) Nanoparticle innovation and print-on-paper fibre recyclability – mapping niches as emergent sociotechnical networks. Working Paper. Brunel University , Brunel University, London.

Stoyanov, Stoyan, Rajaguru, Pushpa and Bailey, Chris (2010) Reduced order modelling for reliability optimisation of advanced micro-systems. In: EngOpt2010 2nd International Conference on Engineering Optimization. International Conference on Engineering Optimization (2). EngOpt2010, pp. 1-10.

Szomszor, Martin, Kostkova, Patty and de Quincey, Ed (2012) #Swineflu: Twitter predicts swine flu oubreak in 2009. In: Electronic Healthcare. Third International Conference, eHealth 2010, Casablanca, Morocco, December 13-15, 2010, Revised Selected Papers. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering (69). Springer Berlin Heidelberg, Berlin, Germany, pp. 18-26. ISBN 978-3-642-23634-1 (doi:10.1007/978-3-642-23635-8_3)

T

Takyi, G. and Ekere, N.N. (2010) Study of the effects of PCB surface finish on plasma process time for lead-free wave soldering. Soldering & Surface Mount Technology, 22 (2). pp. 37-42. ISSN 0954-0911 (doi:10.1108/09540911011036271)

Tee, Kong-Fah, Christopher, C.J., James, M.N. and Patterson, E.A. (2007) Towards a new model of crack tip stress fields. International Journal of Fracture, 148 (4). pp. 361-371. ISSN 0376-9429 (doi:10.1007/s10704-008-9209-3)

Teo, Jianqi, Chen, Yifan, Soh, Cheong Boon, Gunawan, Erry, Low, Kay Soon, Putti, Thomas Choudary and Wang, Shih-Chang (2010) An overview of radar based ultra wideband breast cancer detection algorithms. International Journal of Ultra Wideband Communications and Systems, 1 (4). pp. 273-281. ISSN 1758-728X (Print), 1758-7298 (Online) (doi:10.1504/IJUWBCS.2010.034308)

Thorniley, Sarah and Davis, Josh P. (2012) The development of holistic face processing in children: a variation of the composite face effect. In: British Psychological Society Annual Conference 2012, 18-20 Apr 2012, London, UK.

Tian, Kun V., Nagy, Peter M., Chass, Gregory A., Fejerdy, Pal, Nicholson, John W., Csizmadia, Imre G. and Dobo´-Nagy, Csaba (2012) Qualitative assessment of microstructure and Hertzian indentation failure in biocompatible glass ionomer cements. Journal of Materials Science: Materials in Medicine, 23. pp. 677-685. ISSN 0957-4530 (Print), 1573-4838 (Online) (doi:10.1007/s10856-012-4553-2)

Tilford, Tim, Sinclair, Keith I., Bailey, Christopher, Desmulliez, Marc P.Y., Parrott, Kevin and Sangster, Alan J. (2007) Multiphysics simulation of microwave curing of polymer materials in micro-electronics packaging applications. In: Proceedings book 11th International Conference on Microwave and High Frequency Heating, Oradea, Romania, September, 3-6 2007. University of Oradea, Romania, Oradea, Romania, pp. 189-192. ISBN 9789737593337

Tilford, T., Ferenets, M., Adamietz, R., Pavuluri, S., Morris, J.E., Desmulliez, M.P.Y. and Bailey, C. (2010) Numerical analysis of microwave-assisted encapsulation processes for ball grid array packages. In: International Microwave Power Institute’s 44th Annual Symposium: 2010 Proceedings. International Microwave Power Institute (IMPI), Mechanicsville, VA, USA, pp. 30-35. ISSN 1070-0129

Tilford, T., Morris, J.E., Ferenets, M., Rajaguru, P.R., Pavuluri, S., Desmulliez, M.P.Y. and Bailey, C. (2010) Numerical analysis of polymer cure kinetics in isotropic conductive adhesives. In: 33rd International Spring Seminar on Electronics Technology (ISSE), 2010. Polymer Electronics and Nanotechnologies: Towards System Integration . IEEE Xplore, Sovereign House, London, N3 1QB, UK, pp. 412-416. ISBN 978-1-4244-7849-1 (print), 978-1-4244-7850-7 (e-ISBN) (doi:10.1109/ISSE.2010.5547360)

Trajkovic, Vladimir D., Rapajic, Predrag and Kennedy, Rodney A. (2008) Adaptive ordering for imperfect successive decision feedback multiuser detection. IEEE Transactions on Communications, 56 (2). pp. 173-176. ISSN 0090-6778 (doi:10.1109/TCOMM.2008.040650)

Tsirkas, S.A., Papanikos, P., Pericleous, K., Strusevich, N., Boitout, F. and Bergheau, J.M. (2003) Evaluation of distortions in laser welded shipbuilding parts using local-global finite element approach. Science and Technology of Welding & Joining, 8 (2). pp. 79-88. ISSN 1362-1718 (print), 1743-2936 (online) (doi:10.1179/136217103225010899)

W

Wang, Zhaozhi, Galea, Edwin R., Jia, Fuchen, Ewer, John and Patel, Mayur (2007) Predicting HCI concentrations in fire enclosures using a HCI decay model coupled to a CFD based fire field model. Fire and Materials, 31 (7). pp. 443-461. ISSN 0308-0501 (doi:10.1002/fam.942)

Wang, Hong, Djambazov, Georgi, Pericleous, Koulis A., Harding, Richard A. and Wickins, Michael (2010) Modelling the tilt-casting process for the tranquil filling of titanium alloy turbine blades. In: Modeling of Casting, Welding, and Advanced Solidification Processes - XII (MCWASP XII). John Wiley and SOns, Inc. / The Minerals, Metals & Materials Society (TMS), Warrendale, PA, USA, pp. 53-60. ISBN 978-0-87339-742-1

Wang, Tong, Zhang, Lingmi and Tee, Kong Fah (2011) Extraction of real modes and physical matrices from modal testing. Earthquake Engineering and Engineering Vibration, 10 (2). pp. 219-227. ISSN 1993-503X (online) (doi:10.1007/s11803-011-0060-6)

Wedawatta, Gayan, Ingirige, Bingunath, Jones, Keith and Proverbs, David (2011) Extreme weather events and construction SMEs: Vulnerability, impacts, and responses. Structural Survey, 29 (2). pp. 106-119. ISSN 0263-080X (doi:10.1108/02630801111132795)

Wetherall, Jodie and Woodhead, Steve (2008) Investigation into a modular rule-based testing method for testing business rules in scheduling applications. In: Proceedings 12th World Multi-Conference on Systemics, Cybernetics and Informatics. International Institute of Informatics and Systemics, Orlando, FL, USA, pp. 204-208. ISBN 9781934272312

Woodhead, Steve and Armour-Chelu, David (2002) Comparison of the electric charging properties of particulate materials in gas–solids flows in pipelines. Journal of Electrostatics, 56 (1). pp. 87-101. ISSN 0304-3886 (doi:10.1016/S0304-3886(02)00032-3)

Woodhead, Steve and Armour-Chelu, David (2003) The influence of humidity, temperature and other variables on the electric charging characteristics of particulate aluminium hydroxide in gas-solid pipeline flows. Journal of Electrostatics, 58 (3-4). pp. 171-183. ISSN 0304-3886 (doi:10.1016/S0304-3886(03)00046-9)

Woodhead, Steve and Ma, Mingchao (2006) Authentication delegation for subscription-based remote network services. Computers and Security, 25 (5). pp. 371-378. ISSN 0167-4048 (doi:10.1016/j.cose.2006.03.006)

Woollard, Chris C. (1996) 70mm cinema sound restoration. Image Technology , 78 (5). pp. 4-6. ISSN 0950-2114

Wu, Ruiheng, Lidgey, F.J. and Hayatleh, K. (2007) Design of amplifiers with high gain accuracy and high linearity. In: 2007 50TH Midwest Symposium on Circuits and Systems. Midwest Symposium on Circuits and Systems Conference Proceedings , 1-3 . Institute of Electrical and Electronics Engineers , New York, pp. 269-272. ISBN 9781424411757 (doi:10.1109/MWSCAS.2007.4488586)

Wu, Ruiheng, Lidgey, F.J. and Hayatleh, K. (2008) Design of differential amplifier with negative impedance compensation. In: 2008 4th International Conference on Circuits and Systems for Communications. Institute of Electrical and Electronics Engineers, New York, pp. 589-593. ISBN 9781424417070 (doi:10.1109/ICCSC.2008.131)

Wu, Ruiheng and Wang, Chen (2008) Stability analysis of the amplifier with negative impedance compensation. In: 2008 51st Midwest Symposium on Circuits and Systems. Institute of Electrical and Electronics Engineers, New York, pp. 803-806. ISBN 9781424421664

X

Xue, Xiangdong, Marson, Silvia, Patel, Mayur K., Bailey, Chris, O'Neill, William, Topham, David, Kay, Robert W. and Desmulliez, Marc P.Y. (2011) Progress towards the design and numerical analysis of a 3D microchannel biochip separator. International Journal for Numerical Methods in Biomedical Engineering, 27 (11). pp. 1771-1792. ISSN 2040-7939 (Print), 2040-7947 (Online) (doi:10.1002/cnm.1439)

Xue, Xiangdong, Patel, Mayur K., Bailey, Chris and Desmulliez, Marc P.Y. (2012) Geometrical optimisation of a biochip microchannel fluidic separator. Computer Methods in Biomechanics and Biomedical Engineering, 15 (9). pp. 981-991. ISSN 1025-5842 (Print), 1476-8259 (Online) (doi:10.1080/10255842.2011.569501)

Y

Yek, Bing Lee, Strusevich, N., Bailey, C., Chun-Yan, Yin and Cartwright, C. (2009) Packaging of light emitting diodes for display backlights: Need for multi-disciplinary design tools. In: Electronic Packaging Technology & High Density Packaging, 2009. Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ, USA, pp. 205-208. ISBN 978-1-4244-4659-9 (online), 978-1-4244-4658-2 (print) (doi:10.1109/ICEPT.2009.5270764)

Yuan, Lang, Lee, Peter D., Djambazov, Georgi and Pericleous, Koulis A. (2010) Three-dimensional simulation of the influence of convection on dendritic solidification. In: Modeling of Casting, Welding, and Advanced Solidification Processes - XII (MCWASP XII). John Wiley & Sons, Inc. / The Minerals, Metals & Materials Society, Warrendale, PA, USA, pp. 451-458. ISBN 978-0-87339-742-1 (hbk)

Z

Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.

Zhang, Yong (2000) Use of spatial models and the MCMC method for investigating the relationship between road traffic pollution and asthma amongst children. PhD thesis, University of Greenwich.

Zhou, X.Z., Zheng, J.J. and Li, Chun-Qing (2006) An analytical method for prediction of the elastic modulus of concrete. Magazine of Concrete Research, 58 (10). pp. 665-673. ISSN 0024-9831 (doi:10.1680/macr.2006.58.10.665)

Zhou, Li, Xie, Jiaping and Lin, Yong (2010) Forecasting returns in reverse logistics using GERT network theory. In: Responsive Manufacturing - Green Manufacturing (ICRM 2010). International Conference on Responsive Manufacturing - Green Manufacturing . IEEE Xplore Digital Library, Ningbo, pp. 349-356. (doi:10.1049/cp.2010.0456)