Article

Abou-Chakra, H., Tüzün, Ugur, Bridle, Ian, Leaper, M.C., Bradley, Michael and Reed, Alan (2003) Assessing the potential of a fine powder to segregate using laser diffraction and sieve particle size measuring techniques. Advanced Powder Technology, 14 (2). pp. 167-176. ISSN 0921-8831 (doi:10.1163/156855203763593967)

Alshahed, Osamh S., Kaur, Baldeep ORCID: https://orcid.org/0000-0002-1762-3058, Bradley, Michael S.A. and Armour-Chelu, David (2024) Data-driven system identification and model predictive control of pneumatic conveying using nonlinear dynamics analysis for optimised energy consumption. Powder Technology, 449:120364. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:10.1016/j.powtec.2024.120364)

Alshahed, Osamh Sabri Mohammed Atia, Kaur, Baldeep ORCID: https://orcid.org/0000-0002-1762-3058, Bradley, Michael and Armour-Chelu, David (2023) Application of nonlinear dynamics analysis to gas-solid flow system in horizontal pneumatic conveying of plastic pellets. Powder Technology, 428:118837. pp. 1-16. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:10.1016/j.powtec.2023.118837)

Angulo, O., Berry, R., Bradley, M. and Antonijevic, M. ORCID: https://orcid.org/0000-0002-5847-7886 (2009) Modelling of a dosator: an analytical approach based on measured powder flow properties. Journal of Pharmacy and Pharmacology, 61 (S1). A123-A123. ISSN 0022-3573 (Print), 2042-7158 (Online) (doi:10.1211/002235709789037053)

Ariza-Zafra, K., Berry, R., Bradley, M.S.A. and Santana, J.C. (2010) Achieving mass flow in silos with shallow converging sections using inverted cones. Bulk Solids Handling (Whitepaper). ISSN 0173-9980

Aziza-Zafra, Karol (2010) A hat trick for coal handling. International Bulk Journal, 5. pp. 67-70. ISSN 0260-1087

Barletta, Diego, Berry, Robert J., Larsson, Sylvia H., Lestander, Torbjörn A., Poletto, Massimo and Ramírez-Gómez, Álvaro (2015) Assessment on bulk solids best practice techniques for flow characterization and storage/handling equipment design for biomass materials of different classes. Fuel Processing Technology, 138. pp. 540-554. ISSN 0378-3820 (doi:10.1016/j.fuproc.2015.06.034)

Baross, Anthony W., Wiles, Jonathan D. and Swaine, Ian L. ORCID: https://orcid.org/0000-0002-3747-1370 (2012) Effects of the intensity of leg isometric training on the vasculature of trained and untrained limbs and resting blood pressure in middle-aged men. International Journal of Vascular Medicine, 2012:964697. pp. 1-8. ISSN 2090-2824 (Print), 2090-2832 (Online) (doi:10.1155/2012/964697)

Baroyi, Syahrul Anis Hazwani Mohd, Abel, Stashia Eleaness Rosland, Al-Awaadh, Alhussein M, Fikry, Mohammad, Shah, Nor Nadiah Abdul Karim, Salleh, Faiqa Shazeaa Mohd, Garg, Vivek ORCID: https://orcid.org/0000-0002-8515-4759, Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317 and Yusof, Yus Aniza (2024) Sweet flow: exploring the flowability, caking, morphology, and solubility of date sugars as promising sugar substitutes. Powder Technology. ISSN 0032-5910 (Print), 0032-5910 (Online) (doi:10.1016/j.powtec.2024.119925)

Benoit, Hadrien, Ansart, Renaud, Neau, Herve, García-Triñanes, Pablo ORCID: https://orcid.org/0000-0002-4993-2250, Flamant, Gilles and Simonin, Olivier (2018) 3D numerical simulation of upflow bubbling fluidized bed in opaque tube under high flux solar heating. AIChE Journal, 64 (11). pp. 3857-3867. ISSN 0001-1541 (Print), 1547-5905 (Online) (doi:10.1002/aic.16218)

Berry, R.J., Bradley, M.S.A. and McGregor, R.G. (2014) Brookfield powder flow tester - Results of round robin tests with CRM-116 limestone powder. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 229 (3). pp. 215-230. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1177/0954408914525387)

Bradley, M., Farnish, R. and Deng, T. ORCID: https://orcid.org/0000-0003-4117-4317 (2012) Predicting and preventing wear in pipe bends: Basic information for choosing a cost-effective wear protection solution. Bulk Solids Handling, 32 (4). pp. 26-31. ISSN 0173-9980

Bradley, M. S. A. and Berry, R. (2007) Investigation of the effect of test procedure factors on the failure loci and derived failure functions obtained from annular shear cells. Powder Technology, 174 (1-2). pp. 60-63. ISSN 0032-5910 (doi:10.1016/j.powtec.2006.10.023)

Bradley, Michael S.A., Berry, Rob and Pillai, John (2007) Comparison between the angles of wall friction measured on an on-line wall friction tester and the Jenike wall friction tester. Powder Technology, 174 (1-2). pp. 64-70. ISSN 0032-5910 (doi:10.1016/j.powtec.2006.10.024)

Burnett, A. J. (1993) Wear in pneumatic conveying pipelines. Powder Handling and Processing, 15 (2). pp. 123-128. ISSN 0934-7348

Burnett, A. J., De Silva, S. R. and Reed, A. R. (1995) Comparisons between "sand blast" and "centripetal effect accelerator" type erosion testers. Wear, 186-87 (PART 1). pp. 168-178. ISSN 0043-1648 (doi:10.1016/0043-1648(95)07143-1)

Burnett, A.J., Bradley, M.S.A., O'Flynn, D.J., Deng, T. ORCID: https://orcid.org/0000-0003-4117-4317 and Bingley, M. (1999) Anomalies in the results obtained from rotating disc accelerator erosion testers: a discussion of possible causes. Wear, 233-5. pp. 275-283. ISSN 0043-1648 (doi:10.1016/s0043-1648(99)00227-6)

Burnett, A.J., Desilva, S.R. and Reed, Alan R. (1995) Comparisons between “sand blast” and “centripetal effect accelerator” type erosion testers. Wear, 186-18 (1). pp. 168-178. ISSN 0043-1648 (doi:10.1016/0043-1648(95)07143-1)

Cai, Guohua, Berry, Robert and Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317 (2016) Analysis on flowability of cement based on powder flow tester. China Powder Science and Technology, 22 (1):120. pp. 97-100. ISSN 1008-5548 (doi:10.13732/j.issn.1008-5548.2016.01.023)

Chakravarty, Somik, Fischer, Marc, García-Triñanes, Pablo ORCID: https://orcid.org/0000-0002-4993-2250, Parker, David, Le Bihan, Olivier and Morgeneyer, Martin (2017) Study of the particle motion induced by a vortex shaker. Powder Technology, 322. pp. 54-64. ISSN 0032-5910 (doi:10.1016/j.powtec.2017.08.026)

Chapelle, Pierre, Christakis, Nicholas, Abou-Chakra, Hadi, Bridle, Ian, Bradley, M.S.A., Patel, Mayur and Cross, Mark (2004) Computational model for prediction of particle degradation during dilute-phase pneumatic conveying: modeling of dilute-phase pneumatic conveying. Advanced Powder Technology, 15 (1). pp. 31-49. ISSN 0921-8831 (Print), 1568-5527 (Online) (doi:10.1163/15685520460740052)

Chen, Jinhu, Hutchings, Ian M., Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317, Bradley, Michael S. A. and Koziol, Krzysztof K. K. (2014) The effect of carbon nanotube orientation on erosive wear resistance of CNT-epoxy based composites. Carbon, 73. pp. 421-431. ISSN 0008-6223 (doi:10.1016/j.carbon.2014.02.083)

Chen, Jinhu, Trevarthen, James A., Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317, Bradley, Michael S.A., Rahatekar, Sameer S. and Koziol, Krzysztof K.K. (2014) Aligned carbon nanotube reinforced high performance polymer composites with low erosive wear. Composites Part A: Applied Science and Manufacturing, 67. pp. 86-95. ISSN 1359-835X (doi:10.1016/j.compositesa.2014.08.009)

Christakis, N., Wang, J., Patel, M.K., Bradley, M.S.A., Leaper, M.C. and Cross, M. (2006) Aggregation and caking processes of granular materials: continuum model and numerical simulation with application to sugar. Advanced Powder Technology, 17 (5). pp. 543-565. ISSN 0921-8831 (doi:10.1163/156855206778440480)

Christakis, Nicholas, Chapelle, Pierre, Strusevich, Nadezhda, Bridle, Ian, Baxter, John, Patel, Mayur K., Cross, Mark, Tüzün, Ugur, Reed, Alan R. and Bradley, Michael S. A. (2006) A hybrid numerical model for predicting segregation during core flow discharge. Advanced Powder Technology, 17 (6). pp. 641-662. ISSN 0921-8831 (doi:10.1163/156855206778917715)

Deng, T. ORCID: https://orcid.org/0000-0003-4117-4317, Bingley, M.S., Bradley, M.S.A. and De Silva, S.R. (2008) A comparison of the gas-blast and centrifugal-accelerator erosion testers: The influence of particle dynamics. Wear, 265 (7-8). pp. 945-955. ISSN 0043-1648 (doi:10.1016/j.wear.2008.02.017)

Deng, T. ORCID: https://orcid.org/0000-0003-4117-4317, Farnish, R.J. and Bradley, M.S.A. (2007) Pressure drop in dense phase conveying. Bulk Solids Handling, 27 (5). pp. 296-301. ISSN 0173-9980

Deng, T. ORCID: https://orcid.org/0000-0003-4117-4317, Li, J., Chaudhry, A.R., Patel, M., Hutchings, I. and Bradley, M.S.A. (2004) Comparison between weight loss of bends in a pneumatic conveyor and erosion rate obtained in a centrifugal erosion tester for the same materials. Wear, 258 (1-4). pp. 402-411. ISSN 0043-1648 (doi:10.1016/j.wear.2004.02.012)

Deng, T. ORCID: https://orcid.org/0000-0003-4117-4317, Patel, M., Hutchings, I. and Bradley, M.S.A. (2004) Effect of bend orientation on life and puncture point location due to solid particle erosion of a high concentration flow in pneumatic conveyors. Wear, 258 (1-4). pp. 426-433. ISSN 0043-1648 (doi:10.1016/j.wear.2004.02.010)

Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317, Alzahrani, Abdullah M. and Bradley, Michael S. (2018) Influences of environmental humidity on physical properties and attrition of wood pellets. Fuel Processing Technology, 185. pp. 126-138. ISSN 0378-3820 (doi:10.1016/j.fuproc.2018.12.010)

Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317, Bingley, Mark S. and Bradley, Michael S. A. (2004) The influence of particle rotation on the solid particle erosion rate of metals. Wear, 256 (11-12). pp. 1037-1049. ISSN 0043-1648 (doi:10.1016/S0043-1648(03)00536-2)

Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317, Bingley, Mark S. and Bradley, Mike S.A. (2009) Understanding particle dynamics in erosion testers: a review of influences of particle movement on erosion test conditions. Wear, 267 (11). pp. 2132-2140. ISSN 0043-1648 (doi:10.1016/j.wear.2009.02.020)

Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317 and Bradley, Michael (2016) Determination of a particle size distribution criterion for predicting dense phase pneumatic conveying behaviour of granular and powder materials. Powder Technology, 304. pp. 32-40. ISSN 0032-5910 (doi:10.1016/j.powtec.2016.05.001)

Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317, Farnish, Richard J. and Bradley, Michael S.A. (2008) Evaluation of particle degradation due to high-speed impacts in a pneumatic handling system. Particulate Science and Technology, 26 (5). pp. 438-450. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:10.1080/02726350802367522)

Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317, Garg, Vivek ORCID: https://orcid.org/0000-0002-8515-4759 and Bradley, Michael (2023) Electrostatic charging of fine powders and assessment of charge polarity using an inductive charge sensor. Nanomanufacturing, 3 (3). pp. 281-292. ISSN 2673-687X (Online) (doi:10.3390/nanomanufacturing3030018)

Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317, Garg, Vivek ORCID: https://orcid.org/0000-0002-8515-4759 and Bradley, Michael (2024) Erosive wear of structured Carbon-fibre-reinforced textile polymer composites under sands blasting. Lubricants, 12 (3):94. pp. 1-13. ISSN 2075-4442 (Online) (doi:10.3390/lubricants12030094)

Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317, Garg, Vivek ORCID: https://orcid.org/0000-0002-8515-4759 and Bradley, Michael S.A. (2021) A study of particle adhesion for cohesive powders using a novel mechanical surface energy tester. Powder Technology, 391. pp. 46-56. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:10.1016/j.powtec.2021.06.002)

Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317, Garg, Vivek ORCID: https://orcid.org/0000-0002-8515-4759, Diaz, Laura Pereira, Markl, Daniel, Brown, Cameron, Florence, Alastair and Bradley, Michael S.A. (2022) Comparative studies of powder flow predictions using milligrams of powder for identifying powder flow issues. International Journal of Pharmaceutics, 628:122309. ISSN 0378-5173 (doi:10.1016/j.ijpharm.2022.122309)

Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317, Garg, Vivek ORCID: https://orcid.org/0000-0002-8515-4759, Salehi, Hamid ORCID: https://orcid.org/0000-0002-2516-6619 and Bradley, Michael S. A. (2021) Correlations between segregation intensity and material properties such as particle sizes and adhesions and novel methods for assessment. Powder Technology, 387. pp. 215-226. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:10.1016/j.powtec.2021.04.023)

Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317, Garg, Vivek ORCID: https://orcid.org/0000-0002-8515-4759, Salehi, Hamid ORCID: https://orcid.org/0000-0002-2516-6619 and Bradley, Michael S. A. (2020) An experimental study on free-surface rolling segregation and correlations with angle of repose and particle sphericity. Powder Technology, 379. pp. 307-320. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:10.1016/j.powtec.2020.10.077)

Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317 and Hussain, Tariq (2013) Taking charge. Solids & Bulk Handling. pp. 10-12.

Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317, Massaro Sousa, Lucas ORCID: https://orcid.org/0000-0002-4182-9347, Garg, Vivek ORCID: https://orcid.org/0000-0002-8515-4759 and Bradley, Michael S.A. (2023) Segregation of formulated powders in direct compression process and evaluations by small bench-scale testers. International Journal of Pharmaceutics, 647:123544. ISSN 0378-5173 (doi:10.1016/j.ijpharm.2023.123544)

Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317, Paul, Kirsty A., Bradley, Michael S.A., Immins, Lee, Preston, Chris, Scott, Jerry F. and Welfare, Eloise H. (2010) Investigations on air induced segregation of pharmaceutical powders and effect of material flow functions. Powder Technology, 203 (2). pp. 354-358. ISSN 0032-5910 (doi:10.1016/j.powtec.2010.05.028)

Diaz-Rodriguez, P., García-Triñanes, P. ORCID: https://orcid.org/0000-0002-4993-2250, Echezarreta-López, M. M., Santoveña, A. and Landin, M. (2018) Mineralized alginate hydrogels using marine carbonates for bone tissue engineering applications. Carbohydrate Polymers, 195. pp. 235-242. ISSN 0144-8617 (Print), 1879-1344 (Online) (doi:10.1016/j.carbpol.2018.04.101)

Egbe, Gregory, Arinze, Stella, Ebenuwa, Solomon, Nwajana, Emenike and Nwajana, Augustine ORCID: https://orcid.org/0000-0001-6591-5269 (2024) Maintenance resources optimization using Pareto analysis: instrumentation air compressor in Oredo, Nigeria. International Journal of Manufacturing, Materials, and Mechanical Engineering, 13 (1). pp. 1-14. ISSN 2156-1680 (Print), 2156-1672 (Online) (doi:10.4018/IJMMME.353392)

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2011) Centrifugal tester versus a novel design to measure particle adhesion strength and investigation of effect of physical characteristics (size, shape, density) of food particles on food surfaces. Journal of Food Engineering, 104 (4). pp. 518-524. ISSN 0260-8774 (doi:10.1016/j.jfoodeng.2011.01.008)

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2009) Direct measurement of powder flavor adhesion onto crisp surface using a novel adhesion tester. Particulate Science and Technology, 27 (4). pp. 362-372. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:10.1080/02726350902994035)

Farnish, R. (2007) Common handling problems in bulk granular material. Aluminium International Today, 19 (3). pp. 38-40. ISSN 1475-455X

Farnish, R. (2009) Dosing of powders into processes - is your process control screwed? Bulk Solids Handling, 29 (5). pp. 278-281. ISSN 0173-9980

Farnish, R. (2002) Perfecting powder storage & discharge. Chemical Processing, 65 (7). pp. 24-28. ISSN 0009-2630

Farnish, R. (2007) Segregation of iron ores. Steel Times International, 31 (5). pp. 24-27. ISSN 0143-7798

Farnish, R.J. (2004) Choosing the right storage vessel for your continuous operation. Powder and Bulk Engineering, 18 (11). pp. 33-37. ISSN 0897-6627

Farnish, R.J. (2003) Feeding of the 5,000 (-ton silo). Powder and Bulk Engineering, 17 (5). p. 10. ISSN 0897-6627

Farnish, R.J. (1997) Power consumption and profit margins - less is more. Powder Handling and Processing, 9 (4). pp. 355-357. ISSN 0934-7348

Farnish, R.J. (2007) A changing world demands realistic expectations. Powder and Bulk Engineering, 21 (6). p. 8. ISSN 0897-6627

Farnish, R.J., Berry, R. and Bradley, M. (2008) Development of a novel - filling technique loading bulk particulate materials into tankers or processes. Bulk Solids Handling, 28 (4). pp. 238-241. ISSN 0173-9980

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2011) Testing of powders for sensitivity to air effect segregation. Powder Metallurgy, 54 (4). pp. 468-470. ISSN 0032-5899 (Print), 1743-2901 (Online) (doi:10.1179/174329011X13073642060730)

Farnish, Richard (2010) Tackling powder handling problems. Industrial Minerals. pp. 59-60.

Farnish, Richard J. (2008) Fine in the lab not equal fine for the process. The Chemical Engineer (802). pp. 36-37. ISSN 0302-0797

Garcia Trinanes, Pablo ORCID: https://orcid.org/0000-0002-4993-2250 (2016) Particle progress. The Chemical Engineer, 906 (7):3. pp. 38-40. ISSN 0302-0797

García-Triñanes, Pablo ORCID: https://orcid.org/0000-0002-4993-2250, Luding, Stefan and Shi, Hao (2019) Tensile strength of cohesive powders. Advanced Powder Technology, 30 (12). pp. 2868-2880. ISSN 0921-8831 (Print), 1568-5527 (Online) (doi:10.1016/j.apt.2019.08.017)

Garg, Vivek ORCID: https://orcid.org/0000-0002-8515-4759, Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317 and Bradley, Michael (2021) A new method for assessing powder flowability based on physical properties and cohesiveness of particles using a small quantity of samples. Powder Technology. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:10.1016/j.powtec.2021.10.027)

Garg, Vivek ORCID: https://orcid.org/0000-0002-8515-4759, Mallick, S. S., García-Trinanes, Pablo ORCID: https://orcid.org/0000-0002-4993-2250 and Berry, Robert James (2018) An investigation into the flowability of fine powders used in pharmaceutical industries. Powder Technology, 336. pp. 375-382. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:10.1016/j.powtec.2018.06.014)

Ghanizadeh Tabriz, Atabak, Gonot-Munck, Quentin, Baudoux, Arnaud, Garg, Vivek ORCID: https://orcid.org/0000-0002-8515-4759, Farnish, Richard, L.Katsamenis, Orestis, Hui, Ho-Wah, Boersen, Nathan, Roberts, Sandra, Jones, John and Douroumis, Dionysios ORCID: https://orcid.org/0000-0002-3782-0091 (2023) 3D printing of personalised Carvedilol tablets using selective laser sintering. Pharmaceutics, 15 (9):2230. pp. 1-19. ISSN 1999-4923 (Online) (doi:10.3390/pharmaceutics15092230)

Gilvari, Hamid, van Battum, H, Farnish, Richard, Pang, Yusong, de Jong, Wiebren and Schott, Digena (2021) Fragmentation of fuel pellets during transport via a belt conveyor: a design of experiment study. Particuology, 66. pp. 29-37. ISSN 1674-2001 (doi:10.1016/j.partic.2021.08.007)

Hussain, Tariq, Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317, Bradley, Michael, Armour-Chelu, David, Pillai, John, Saadat, Salman and Kaialy, Waseem (2023) Noise reduction by using wavelet transform in charge signal acquired from an electrostatic inductive sensor. Measurement: Sensors, 27:100757. pp. 1-4. ISSN 2665-9174 (Online) (doi:10.1016/j.measen.2023.100757)

Hussain, Tariq, Kaialy, Waseem, Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317, Bradley, Mike S.A., Nokhodchi, Ali and Armour-Chélu, David (2012) A novel sensing technique for measurement of magnitude and polarity of electrostatic charge distribution across individual particles. International Journal of Pharmaceutics, 441 (1-2). pp. 781-789. ISSN 0378-5173 (doi:10.1016/j.ijpharm.2012.10.002)

Ilic, Dusan, Williams, Kenneth, Farnish, Richard, Webb, Erin and Liu, Gary (2018) On the challenges facing the handling of solid biomass feedstocks. Biofuels, Bioproducts and Biorefining, 12 (2). pp. 187-202. ISSN 1932-104X (Print), 1932-1031 (Online) (doi:10.1002/bbb.1851)

Jiang, Yang, Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317 and Nasr, Karim ORCID: https://orcid.org/0000-0002-8604-6274 (2022) Baseline tracking in bipolar charge signal process by dynamic time warping algorithm. IEEE Sensors Journal, 23 (5). 4540 -4547. ISSN 1530-437X (Print), 1558-1748 (Online) (doi:10.1109/JSEN.2022.3162494)

Kaur, Baldeep ORCID: https://orcid.org/0000-0002-1762-3058 and Jana, Soumendu (2018) Cavity soliton molecules and all-optical push-broom effect. Journal of Lightwave Technology, 36 (12). pp. 2463-2470. ISSN 0733-8724 (Print), 1558-2213 (Online) (doi:10.1109/JLT.2018.2815845)

Kaur, Baldeep ORCID: https://orcid.org/0000-0002-1762-3058 and Jana, Soumendu (2017) Generation and dynamics of one-and two-dimensional cavity solitons in a vertical-cavity surface-emitting laser with a saturable absorber and frequency-selective feedback. Journal of the Optical Society of America B, 34 (7). pp. 1374-1385. ISSN 0740-3224 (Print), 1520-8540 (Online) (doi:10.1364/JOSAB.34.001374)

Kaur, Baldeep ORCID: https://orcid.org/0000-0002-1762-3058 and Jana, Soumendu (2016) A generic travelling wave solution in dissipative laser cavity. Pramana, 87 (4):53. ISSN 0304-4289 (Print), 0973-7111 (Online) (doi:10.1007/s12043-016-1244-4)

Kaur, Baldeep ORCID: https://orcid.org/0000-0002-1762-3058, Mittal, Anu, Jana, Soumendu, Mallick, S.S. and Wypych, Peter (2018) Stability and phase space analysis of fluidized-dense phase pneumatic transport system. Powder Technology, 330. pp. 190-200. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:10.1016/j.powtec.2018.02.023)

Kaur, Baldeep ORCID: https://orcid.org/0000-0002-1762-3058, Mittal, Anu, Mallick, S.S., Pan, Renhu and Jana, Soumendu (2017) Numerical simulation of fluidized dense-phase pneumatic conveying of powders to develop improved model for solids friction factor. Particuology, 35. pp. 42-50. ISSN 1674-2001 (doi:10.1016/j.partic.2016.11.006)

Kaur, Baldeep ORCID: https://orcid.org/0000-0002-1762-3058, Mittal, Anu, Wypych, Peter, Mallick, S. S. and Jana, Soumendu (2016) On developing improved modelling and scale-up procedures for pneumatic conveying of fine powders. Powder Technology, 305. pp. 270-278. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:10.1016/j.powtec.2016.09.080)

Khizer, Zara, Akram, Muhammad R., Sarfraz, Rai M., Nirwan, Jorabar Singh, Farhaj, Samia, Yousaf, Maria, Hussain, Tariq, Lou, Shan ORCID: https://orcid.org/0000-0002-8426-5596, Timmins, Peter ORCID: https://orcid.org/0000-0002-5840-0678, Conway, Barbara R. ORCID: https://orcid.org/0000-0001-5570-3318 and Ghori, Muhammad Usman (2019) Plasticiser-free 3D printed hydrophilic matrices: Quantitative 3D surface texture, mechanical, swelling, erosion, drug release and pharmacokinetic studies. Polymers, 11 (7):1095. ISSN 2073-4360 (Online) (doi:10.3390/polym11071095)

Kolipaka, Siva Satyanarayana, Junqueira, Laura Andrade, Ross, Steven, Garg, Vivek ORCID: https://orcid.org/0000-0002-8515-4759, Mithu, Md Sadeque Hossain, Bhatt, Saumil and Douroumis, Dionysios ORCID: https://orcid.org/0000-0002-3782-0091 (2024) An advanced twin‑screw granulation technology: the use of non‑volatile solvents with high solubilizing capacity. AAPS PharmSci Tech, 25:174. ISSN 1530-9932 (Online) (doi:10.1208/s12249-024-02890-y)

Kotzur, Benjamin A., Berry, Robert J., Zigan, Stefan, García-Triñanes, Pablo ORCID: https://orcid.org/0000-0002-4993-2250 and Bradley, Michael S. A. (2018) Particle Attrition Mechanisms, their characterisation, and application to horizontal lean phase pneumatic conveying systems: A review. Powder Technology, 334. pp. 76-105. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:10.1016/j.powtec.2018.04.047)

Kotzur, Benjamin A., Bradley, Michael S.A., Berry, Robert J. and Farnish, Richard J. (2016) Breakage characteristics of granulated food products for prediction of attrition during lean-phase pneumatic conveying. International Journal of Food Engineering, 12 (9). ISSN 1556-3758 (Print), 2194-5764 (Online) (doi:10.1515/ijfe-2016-0045)

Kulkarni, P.A., Berry, R.J. and Bradley, M.S.A. (2010) Review of the flowability measuring techniques for powder metallurgy industry. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 224 (3). pp. 159-168. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/09544089JPME299)

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2006) Predicting segregation of metal powders. Powder Metallurgy, 49 (3). pp. 206-208. ISSN 0032-5899 (Print), 1743-2901 (Online) (doi:10.1179/174329006X152442)

Leaper, M.C., Bradley, Michael S.A., Cleaver, J.A.S., Bridle, Ian, Reed, Alan R., Abou-Chakra, H. and Tüzün, Ugur (2002) Constructing an engineering model for moisture migration in bulk solids as a prelude to predicting moisture migration caking. Advanced Powder Technology, 13 (4). pp. 411-424. (doi:10.1163/156855202320536043)

Lulbadda Waduge, L.L., Zigan, S., Stone, L.E., Belaidi, A. and García-Triñanes, P. ORCID: https://orcid.org/0000-0002-4993-2250 (2016) Predicting concentrations of fine particles in enclosed vessels using a camera based system and CFD simulations. Process Safety and Environmental Protection, 105. pp. 262-273. ISSN 0957-5820 (Print), 1744-3598 (Online) (doi:10.1016/j.psep.2016.11.013)

Mallick, Soumya, Rohilla, Lokesh, Garg, Vivek ORCID: https://orcid.org/0000-0002-8515-4759 and Setia, Gautam (2018) Modeling flow properties of fine dry powders using particle morphological properties and its effects on geometry of fly ash evacuation hoppers. Particulate Science and Technology, 36 (4). pp. 464-472. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:10.1080/02726351.2017.1367746)

Massaro Sousa, Lucas ORCID: https://orcid.org/0000-0002-4182-9347, Amblard, Benjamin, Montjovet, Florian and Tebianian, Sina (2021) Characterization of a pressurized feeder for biomass injection into gas-solid systems. Chemical Engineering Research and Design, 175. pp. 171-181. ISSN 0263-8762 (doi:10.1016/j.cherd.2021.08.024)

Massaro Sousa, Lucas ORCID: https://orcid.org/0000-0002-4182-9347, Amblard, Benjamin and Tebianian, Sina (2022) CFD simulation for characterization and scale-up of pulsed biomass transport. Chemical Engineering Science, 255:117652. pp. 1-12. ISSN 0009-2509 (doi:10.1016/j.ces.2022.117652)

Massaro Sousa, Lucas ORCID: https://orcid.org/0000-0002-4182-9347, Schulz, CG, Condotta, Rodrigo and do Carmo Ferreira, Maria (2021) On the design of conical hoppers for spent coffee grounds: moisture content and particle-size effects. Journal of Food Engineering, 300:110537. ISSN 0260-8774 (Print), 0260-8774 (Online) (doi:10.1016/j.jfoodeng.2021.110537)

Massaro Sousa, Lucas ORCID: https://orcid.org/0000-0002-4182-9347 and do Carmo Ferreira, Maria (2019) Densification behavior of dry spent coffee ground powders: experimental analysis and predictive methods. Powder Technology, 357. pp. 149-157. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:10.1016/j.powtec.2019.08.069)

Massaro Sousa, Lucas ORCID: https://orcid.org/0000-0002-4182-9347 and do Carmo Ferreira, Maria (2020) On the performance of a spouted bed type device for feeding spent coffee grounds to a circulating fluidized bed reactor. Chemical Engineering Research and Design, 160. pp. 31-38. ISSN 0263-8762 (doi:10.1016/j.cherd.2020.05.002)

Massaro Sousa, Lucas ORCID: https://orcid.org/0000-0002-4182-9347 and do Carmo Ferreira, Maria (2018) Spent coffee grounds as a renewable source of energy: an analysis of bulk powder flowability. Particuology, 43. pp. 92-100. ISSN 1674-2001 (doi:10.1016/j.partic.2018.06.002)

Massaro Sousa, Lucas ORCID: https://orcid.org/0000-0002-4182-9347, do Carmo Ferreira, Maria, Hou, Qinfu and Yu, Aibing (2020) Feeding spent coffee grounds into reactors: TFM simulation of a non-mechanical spouted bed type feeder. Waste Management, 109. pp. 161-170. ISSN 0956-053X (doi:10.1016/j.wasman.2020.04.056)

Nwajana, Augustine ORCID: https://orcid.org/0000-0001-6591-5269 and Obi, Emenike Raymond (2023) Application of compact folded-arms square open-loop resonator to bandpass filter design. Micromachines, 14 (2):320. ISSN 2072-666X (Online) (doi:10.3390/mi14020320)

Nwajana, Augustine O. ORCID: https://orcid.org/0000-0001-6591-5269 and Paul, Rose (2024) Three-way equal filtering power divider for modern communication systems. Engineering Reports:e13036. ISSN 2577-8196 (Online) (doi:10.1002/eng2.13036)

Obi, Emenike R. and Nwajana, Augustine ORCID: https://orcid.org/0000-0001-6591-5269 (2022) Modeling, integration, and automation of degradation to generate asset lifespan analytics using AssessLIFE software. International Journal of Manufacturing, Materials, and Mechanical Engineering, 12 (1):28. pp. 1-40. ISSN 2156-1680 (Print), 2156-1672 (Online) (doi:10.4018/IJMMME.300828)

Pretti Ogura, Allan, Zanin Lima, Jaqueline, Pelinsom Marques, Jéssica, Massaro Sousa, Lucas ORCID: https://orcid.org/0000-0002-4182-9347, Guimarães Silvestre Rodrigues, Valéria and Luiz Gaeta Espíndola, Evaldo (2021) A review of pesticides sorption in biochar from maize, rice, and wheat residues: current status and challenges for soil application. Journal of Environmental Management, 300:113753. ISSN 0301-4797 (doi:10.1016/j.jenvman.2021.113753)

Robinson, J.P., Kingman, S.W., Snape, C.E., Barranco, R., Shang, H., Bradley, M.S.A. and Bradshaw, S.M. (2009) Remediation of oil-contaminated drill cuttings using continuous microwave heating. Chemical Engineering Journal, 152 (2-3). pp. 458-463. ISSN 1385-8947 (doi:10.1016/j.cej.2009.05.008)

Robinson, J.P., Kingman, S.W., Snape, C.E., Bradshaw, S.M., Bradley, M.S.A., Shang, H. and Barranco, R. (2009) Scale-up and design of a continuous microwave treatment system for the processing of oil-contaminated drill cuttings. Chemical Engineering Research and Design, 88 (2). pp. 146-154. ISSN 0263-8762 (doi:10.1016/j.cherd.2009.07.011)

Robinson, John, Kingman, Sam, Snape, Colin E., Bradley, Mike, Bradshaw, Steven, Thomas, Dominic J.M. and Page, Paul W. (2009) Microwave treatment of oil-contaminated drill cuttings at pilot scale. SPE Drilling and Completion, 24 (3). pp. 430-435. ISSN 1064-6671 (Print), 1930-0204 (Online) (doi:10.2118/111637-PA)

Rohilla, Lokesh, Garg, Vivek ORCID: https://orcid.org/0000-0002-8515-4759, Mallick, Soumya and Setia, Gautam (2018) An experimental investigation on the effect of particle size into the flowability of fly ash. Powder Technology, 330. pp. 164-173. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:10.1016/j.powtec.2018.02.013)

Saeed, Muhammad Asfar, Obi, Emenike R. and Nwajana, Augustine O. ORCID: https://orcid.org/0000-0001-6591-5269 (2024) A compact linear microstrip patch beamformer antenna array for millimeter-wave future communication. Sensors, 24 (13):4068. pp. 1-13. ISSN 1424-8220 (Online) (doi:10.3390/s24134068)

Saeed, Muhammad and Nwajana, Augustine ORCID: https://orcid.org/0000-0001-6591-5269 (2024) A review of beamforming microstrip patch antenna array for future 5G/6G networks. Frontiers in Mechanical Engineering, 9:1288171. pp. 1-15. ISSN 2297-3079 (Online) (doi:10.3389/fmech.2023.1288171)

Salehi, Hamid ORCID: https://orcid.org/0000-0002-2516-6619, Berry, Robert, Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317, Larsson, Sylvia H., Farnish, Richard and Bradley, Mike (2019) Development and application of a novel cake strength tester. Powder Technology, 350. pp. 36-42. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:10.1016/j.powtec.2019.03.024)

Salehi, Hamid ORCID: https://orcid.org/0000-0002-2516-6619, Berry, Robert, Farnish, Richard and Bradley, Mike (2019) Temperature and time consolidation effect on the bulk flow properties and arching tendency of a detergent powder. Chemical Engineering & Technology, 43 (1). pp. 150-156. ISSN 0930-7516 (Print), 1521-4125 (Online) (doi:10.1002/ceat.201900092)

Salehi, Hamid, Berry, Robert, Farnish, Richard and Bradley, Mike (2019) A new uniaxial compression tester: development and application. Chemical Engineering Transactions, 74. pp. 463-468. ISSN 2283-9216 (doi:10.3303/CET1974078)

Salehi Kahrizsangi, Hamid ORCID: https://orcid.org/0000-0002-2516-6619, Cummins, John, Gallino, Enrico, Garg, Vivek ORCID: https://orcid.org/0000-0002-8515-4759, Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317, Hassanpour, Ali and Bradley, Michael (2023) Optimising spread-layer quality in powder additive manufacturing: assessing packing fraction and segregation tendency. Processes, 11 (8):2276. pp. 1-22. ISSN 2227-9717 (Online) (doi:10.3390/pr11082276)

Salehi Kahrizsangi, Hamid ORCID: https://orcid.org/0000-0002-2516-6619, Karde, Vikram, Hajmohammadi, Hajar, Dissanayake, Susantha, Larsson, Sylvia, Heng, Jerry and Bradley, Michael (2021) Understanding flow properties of mannitol powder at a range of temperature and humidity. International Journal of Pharmaceutics, 596:120244. ISSN 0378-5173 (doi:10.1016/j.ijpharm.2021.120244)

Salehi Kahrizsangi, Hamid ORCID: https://orcid.org/0000-0002-2516-6619, Timmerfors, Jessica Gard, Hajmohammadi, Hajar, Garg, Vivek ORCID: https://orcid.org/0000-0002-8515-4759, Berry, Robert, Barletta, Diego, Poletto, Massimo, Jonsson, Leif J, Bradley, Michael and Larsson, Sylvia H. (2023) The role of particle size and other properties on silo discharge behaviour of chipped wood biomass. Powder Technology, 432:119174. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:10.1016/j.powtec.2023.119174)

Salter, G.F., Farnish, R.J., Bradley, M.S.A. and Burnett, A.J. (2000) Segregation of binary mixtures of particles during the filling of a two-dimensional representation of a hopper. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 214 (3). pp. 197-208. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/0954408001530056)

Schuster, T., Bradley, M.S.A. and Reed, Alan R. (1995) The dependence of power consumption of pneumatic conveying systems upon bulk material properties, pipeline bore and routing, and mode of flow. Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering, 209 (E1). pp. 69-75. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/PIME_PROC_1995_209_230_02)

Shang, Zhigen, Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317, He, Jianqiang and Duan, Xiaohui (2018) A novel model for hourly PM2.5 concentration prediction based on CART and EELM. Science of The Total Environment, 651 (2). pp. 3043-3052. ISSN 0048-9697 (Print), 1879-1026 (Online) (doi:10.1016/j.scitotenv.2018.10.193)

Sharma, Atul ORCID: https://orcid.org/0000-0002-6756-4148 and Mallick, SS (2019) An investigation into pressure drop through bends in pneumatic conveying systems. Particulate Science and Technology, 39 (2). pp. 180-191. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:10.1080/02726351.2019.1676348)

Singh, Gulab, Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317, Bradley, Michael and Ellis, Richard (2023) Advanced assessment of biomass materials degradation in pneumatic conveying systems: challenges and applications. Applied Sciences, 13:1960. pp. 1-13. ISSN 2076-3417 (Online) (doi:10.3390/app13031960)

Stutt, Richard O. J. H. ORCID: https://orcid.org/0000-0002-1765-2633, Retkute, Renata, Bradley, Michael, Gilligan, Christopher A. and Colvin, John (2020) A modelling framework to assess the likely effectiveness of facemasks in combination with ‘lock-down’ in managing the COVID-19 pandemic. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 476 (2238):20200376. ISSN 1364-5021 (Print), 1471-2946 (Online) (doi:10.1098/rspa.2020.0376)

Zhang, Guangdong, Huang, Xiang, Li, Shuanggao and Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317 (2019) Optimized design method for profile extrusion die based on NURBS modeling. Fibers and Polymers, 20 (8). pp. 1733-1741. ISSN 1229-9197 (Print), 1875-0052 (Online) (doi:10.1007/s12221-019-1168-y)

Zhang, Guangdong ORCID: https://orcid.org/0000-0003-0285-6745, Huang, Xiang, Li, Shuanggao, Xia, Chao and Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317 (2020) Improved inverse design method for thin-wall hollow profiled polymer extrusion die based on FEM-CFD simulations. The International Journal of Advanced Manufacturing Technology, 106 (7-8). pp. 2909-2919. ISSN 0268-3768 (Print), 1433-3015 (Online) (doi:10.1007/s00170-019-04785-w)

Zigan, Stefan and Patel, Amit (2013) Theoretical and experimental testing of a scaling rule for predicting segregation in differently sized silos. KONA Powder and Particle Journal, 30. pp. 276-283. ISSN 0288-4534 (Print), 2187-5537 (Online)

Zigan, Stefan, Thorpe, Rex B., Tuzun, Ugur, Enstad, Gisle G. and Battistin, Flavio (2007) Theoretical and experimental testing of a scaling rule for air current segregation of alumina powder in cylindrical silos. Powder Technology, 183 (1). pp. 133-145. ISSN 0032-5910 (doi:10.1016/j.powtec.2007.11.030)

Book Section

Angulo Pinzon, O.A., Bradley, Michael, Berry, Robert and Farnish, Richard J. (2008) Modelling dosator filling and discharge of powder. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 586-591. ISBN 9788272062896

Ariza-Zafra, K., Berry, Robert and Bradley, Michael S. A. (2008) Review of models for predicting the discharge rates of bulk particulates from silos and bins. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 484-492. ISBN 9788272062896

Berry, Rob, Bradley, Michael S.A., Farnish, Richard J. and Angulo Pinzon, O.A. (2008) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 344-350. ISBN 9788272062896

Bradley, M. S. A., Burnett, A. J. and Woodhead, S. R. (1995) Measurement of pressure profiles in pneumatic conveying pipelines. Instrumentation and Measurement Technology Conference, 1995. IMTC/95. Proceedings. Integrating Intelligent Instrumentation and Control., IEEE. Institute of Electrical and Electronics Engineers, New York, pp. 766-769. ISBN 978-0780326156 (doi:10.1109/IMTC.1995.515419)

Bradley, M. S. A., Reed, A. R., Berry, R. and Holmes, C.P.M. (2008) Start-up and running forces on bulk solids feeders: experimental findings versus available models. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 450-457. ISBN 9788272062896

Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317, Bradley, Michael S. A., Berry, Rob and Kostuch, J. (2008) Caking strength of granulated clay under frozen conditions. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 604-609. ISBN 9788272062896

Ermis, Ertan, Farnish, Richard J., Berry, Rob and Bradley, Michael S. A. (2008) Direct measurement of powder flavour adhesion on to a food surface using a novel adhesion tester. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 803-810. ISBN 9788272062896

Farnish, Richard J., Kulkarni, Prasanna and Bradley, Michael S. A. (2008) Segregation of bulk particulates through multiple process handling steps. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 505-510. ISBN 9788272062896

Kure, Halima and Nwajana, Augustine ORCID: https://orcid.org/0000-0001-6591-5269 (2022) Protection of critical infrastructure using an Integrated Cybersecurity Risk Management (i-CSRM) framework. In: Nwajana, Augustine ORCID: https://orcid.org/0000-0001-6591-5269, (ed.) 5G Internet of Things and Changing Standards for Computing and Electronic Systems. IGI Global, Hershey, Pennsylvania, pp. 94-133. ISBN 978-1668438558; 1668438550; 978-1668438565; 978-16684385 (doi:10.4018/978-1-6684-3855-8.ch004)

Obi, Emenike and Nwajana, Augustine ORCID: https://orcid.org/0000-0001-6591-5269 (2022) AssessLIFE software for automation of asset degradation to estimate Asset life and degradation drivers. In: Nwajana, Augustine ORCID: https://orcid.org/0000-0001-6591-5269, (ed.) 5G Internet of Things and Changing Standards for Computing and Electronic Systems. IGI Global, Hershey, Pennsylvania, pp. 30-80. ISBN 978-1668438558; 1668438550; 978-1668438565; 978-16684385 (doi:10.4018/978-1-6684-3855-8.ch002)

Sengupta, Shampa, Pal, Kumud Ranjan and Garg, Vivek ORCID: https://orcid.org/0000-0002-8515-4759 (2022) Design of an intelligent system for diabetes prediction by integrating rough set theory and genetic algorithm. In: Bagga, Teena, Upreti, Kamal, Kumar, Nishant, Ansari, Amirul Hasan and Nadeem, Danish, (eds.) Designing Intelligent Healthcare Systems, Products, and Services Using Disruptive Technologies and Health Informatics. CRC Press, Taylor Francis, Boca Raton, pp. 157-172. ISBN 978-1003217107 (doi:10.1201/9781003217107)

Tripathi, Anuj, Garg, Vivek ORCID: https://orcid.org/0000-0002-8515-4759, Vargis, Binu Kuriakose and Agrawal, Chaitanya P. (2023) Blockchain-enabled secured medical supply chain management. In: Bagga, Teena, Upreti, Kamal, Kumar, Nishant, Ansari, Amirul Hasan and Nadeem, Danish, (eds.) Designing Intelligent Healthcare Systems, Products, and Services Using Disruptive Technologies and Health Informatics. CRC Press, Taylor & Francis, Boca Raton, pp. 189-210. ISBN 978-1003217107 (doi:10.1201/9781003217107)

Conference Proceedings

Alshahed, Osamh Sabri Mohammed Atia, Kaur, Baldeep ORCID: https://orcid.org/0000-0002-1762-3058 and Bradley, Michael (2023) Application of chaos analysis to electrostatic measurements of horizontal gas-solid flow in pneumatic conveying of plastic pellets. In: ICBMH 2023: 14th International Conference on Bulk Materials Storage, Handling and Transportation. Proceedings: Wollongong, NSW Australia, 11th - 13th July, 2023. ICBMH 2023 . Engineers Australia, Wollongong, New South Wales, Australia, pp. 455-463. ISBN 978-1925627831

Alshahed, Osamh Sabri Mohammed Atia, Kaur, Baldeep ORCID: https://orcid.org/0000-0002-1762-3058 and Bradley, Michael (2023) Application of recurrence quantification analysis to electrostatic measurements of horizontal gas-solid flow in pneumatic conveying of plastic pellets. In: ICBMH 2023: 14th International Conference on Bulk Materials Storage, Handling and Transportation. Proceedings: Wollongong, NSW Australia, 11th - 13th July, 2023. ICBMH 2023 . Engineers Australia, Wollongong, New South Wales, Australia, pp. 413-424. ISBN 978-1925627831

Alupathgala Kankanamalage, Chanaka Prasad, Kaur, Baldeep ORCID: https://orcid.org/0000-0002-1762-3058, Salehi Kahrizsangi, Hamid ORCID: https://orcid.org/0000-0002-2516-6619, Ellis, Richard and Bradley, Michael (2023) System identification and stability analysis of a pneumatic conveying pipeline based on blower input voltage and particle velocity: preliminary study. In: ICBMH 2023: 14th International Conference on Bulk Materials Storage, Handling and Transportation. Proceedings: Wollongong, NSW Australia, 11th - 13th July, 2023. ICBMH 2023 . Engineers Australia, Wollongong, New South Wales, Australia, pp. 436-444. ISBN 978-1925627831

Deng, T. ORCID: https://orcid.org/0000-0003-4117-4317, Su, J.W., Zhang, Y., Bradley, M.S.A. and Wei, X.L. (2011) Making coal/biomass pellets for co-firing - a review and pioneer work. In: Proceedings of the Bioten Conference on Biomass Bioenergy and Biofuels 2010. CPL Press, Newbury, UK. ISBN 9781872691541

Dissanayake Mudiyanselage, Susantha ORCID: https://orcid.org/0000-0002-0953-379X, Bradley, Michael, Zigan, Stefan, Salehi Kahrizsangi, Hamid ORCID: https://orcid.org/0000-0002-2516-6619 and Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317 (2023) Frequency domain analysis to identify main segregation contributors in a chain of material handling. In: ICBMH2023: 14th International Conference on Bulk Materials Storage, Handling and Transportation. ICBMH - The Institution of Engineers, Wollongong, NSW Australia, pp. 372-380. ISBN 978-1925627831

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2010) Testing of powders for sensitivity to air effect segregation. In: Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Florence, pp. 53-60. ISBN 978-189907219-4

Farnish, Richard, Beladi, Abdelhafid and Zigan, Stefan (2019) Investigation into the effects of cyclic particle loading onto filter media. In: ICBMH 2019. University of Newcastle, Australia.

Farnish, Richard, Belaidi, Hafid and Zigan, Stefan (2019) The effects of reverse jet pulse over-pressurisation on dust filter performance. In: ICBMH 2019. University of Newcastle, Australia.

Farnish, Richard, Bradley, Michael and Garg, Vivek ORCID: https://orcid.org/0000-0002-8515-4759 (2023) Investigations into optimal pulse cleaning of dust filter media. In: ICBMH 2023: 14th International Conference on Bulk Materials Storage, Handling and Transportation. Proceedings: Wollongong, NSW Australia, 11th - 13th July, 2023. ICBMH 2023 . Engineers Australia, Wollongong, New South Wales, Australia, pp. 154-160. ISBN 978‐1925627831

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2005) Segregation of metal powders. In: Euro PM 2005: Powder Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA), Prague, Czech Republic, pp. 61-66. ISBN 9781899072187

Lakshman, Biju, Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317, Bradley, Michael S. A., Okereke, Michael ORCID: https://orcid.org/0000-0002-2104-012X and McIlhagger, A. T. (2014) Erosive wear of polymer composite materials and its correlation with high strain rate mechanical properties. In: 2nd International Conference on Abrasive Processes - ICAP 2014 (Programme and Abstract Book). ICAP, Cambridge, United Kingdom, p. 24.

Saeed, Muhammad A. and Nwajana, Augustine ORCID: https://orcid.org/0000-0001-6591-5269 (2024) Sub-terahertz microstrip antenna array for future communication. In: 2023 International Conference on Electrical, Computer and Energy Technologies (ICECET). Cape Town, South Africa, 16th - 17th November 2023. IEEE Xplore . Institute of Electrical and Electronics Engineers (IEEE), Piscataway, New Jersey, pp. 1-4. ISBN 979-8350327816; :979-8350327823 (doi:10.1109/ICECET58911.2023.10389582)

Singh, Gulab, Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317, Bradley, Michael and Ellis, Richard (2023) Evaluation and calibration of wood pellets degradation using a rotary impact tester against single-bend attrition tester. In: ICBMH2023 14th International Conference on Bulk Materials Storage, Handling and Transportation. Proceedings. Wollongong, NSW, Australia, 11th - 13th July, 2023. Engineers Australia, University of Wollongong, New South Wales, Australia, pp. 309-320. ISBN 978‐1925627831

Sparrow, R. D, Adekunle, A. A. and Berry, R. J. (2017) LEOPARD lightweight encryption operation permutation addition rotation and diffusion. In: IEEE 10th International Conferences on Signal Processing and Communication Systems. IEEE, pp. 1-5. ISBN 978-1-5090-0941-1 (doi:10.1109/ICSPCS.2016.7843322)

Sparrow, R. D, Adekunle, A. A., Berry, R. J. and Farnish, R. J. (2016) A novel block cipher design paradigm for secured communication. In: 2016 Annual IEEE 10th International Systems Conference (SysCon). IEEE, Florida, United States of America, pp. 1-6. ISBN 978-1-4673-9519-9 (doi:10.1109/SYSCON.2016.7490659)

Sparrow, R. D., Adekunle, A. A., Berry, R. J. and Farnish, R. J. (2014) Simulating and modelling the impact of security constructs on latency for open loop control. In: 6th Computer Science and Electronic Engineering Conference (CEEC), 2014. IEEE, Colchester, pp. 85-90. ISBN 9781479966929 (doi:10.1109/CEEC.2014.6958560)

Sparrow, R. D., Adekunle, A. A., Berry, R. J. and Farnish, R. J. (2016) The affect of two cryptographic constructs on QoS and QoE for unmanned control vehicles. In: 2015 9th International Conference on Next Generation Mobile Applications, Services and Technologies. IEEE, pp. 265-269. ISBN 978-1-4799-8660-6 (doi:10.1109/NGMAST.2015.46)

Sparrow, R. D., Adekunle, Andrew, Berry, Robert and Farnish, Richard (2015) Simulating and modelling the impact of secure communication latency for closed loop control. In: Internet Technologies and Applications (ITA), 2015. IEEE, Wrexham, UK, pp. 138-143. ISSN 9781479980369 (doi:10.1109/ITechA.2015.7317384)

Sparrow, R.D., Adekunle, A.A., Berry, R.J. and Farnish, R.J. (2015) Balancing throughput and latency for an aerial robot over a wireless secure communication link. In: 2015 IEEE 2nd International Conference on Cybernetics (CYBCONF). IEEE, pp. 184-189. ISBN 978-1-4799-8320-9 (doi:10.1109/CYBConf.2015.7175929)

Conference or Conference Paper

Alshahed, Osamh Sabri Mohammed Atia, Kaur, Baldeep ORCID: https://orcid.org/0000-0002-1762-3058 and Bradley, Michael (2023) Cross recurrence quantification analysis of gas-solid flow in pneumatic conveying of plastic pellets using electrostatic sensors. In: 9th UK-China International Particle Technology Forum / 18th Particle Technology Early Career Forum, 21st - 24th Aug 2023, Greenwich, London, UK. (Unpublished)

Alshahed, Osamh Sabri Mohammed Atia, Kaur, Baldeep ORCID: https://orcid.org/0000-0002-1762-3058, Bradley, Michael and Armour-Chelu, David (2024) Model predictive control simulation of pneumatic conveying of plastic pellets using nonlinear dynamics analysis and sparse identification of nonlinear dynamics with control. In: CHoPS 2024: 11th International Conference on Conveying and Handling of Particulate Solids, 2nd - 4th Sep., 2024, Edinburgh.

Alshahed, Osamh Sabri Mohammed Atia, Kaur, Baldeep ORCID: https://orcid.org/0000-0002-1762-3058, Bradley, Michael and Okereke, Michael ORCID: https://orcid.org/0000-0002-2104-012X (2023) Experimental and numerical study on gas-solid flow system of plastic pellets using recurrence quantification analysis of pressure sensor measurements. In: UKACM 2023 Conference (UK Association for Computational Mechanics), 19th - 21st April 2023, The University of Warwick, 19-21 April 2023. (Unpublished)

Angulo Pinzon, O.A., Berry, R.J., Bradley, M.S and Antonijevic, M.D. ORCID: https://orcid.org/0000-0002-5847-7886 (2009) Modelling of dosator operation for improved manufacturing performance. In: 2009 AAPS Annual Meeting and Exposition, 8-12 Nov 2009, Los Angeles, USA.

Angulo Pinzon, O.A., Berry, R.J., Bradley, M.S., Farnish, R.J. and Antonijevic, M.D. ORCID: https://orcid.org/0000-0002-5847-7886 (2009) The impact of powder flowing properties on dosator filling system operation. In: 2009 AAPS Annual Meeting and Exposition, 8-12 Nov 2009, Los Angeles, USA.

Berry, Rob, Bradley, Michael S. A., Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction test procedure, suitable for equipment design and powder characterisation. In: ICBMH Conference: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, Australia. (Unpublished)

Bradley, Michael (2023) Structural failure of silos: learning lessons from failure. In: 14th International Conference on Bulk Materials Storage, Handling and Transportation, 11th - 13th July 2023, Wollongong, New South Wales, Australia. (Unpublished)

Bradley, Michael, Berry, Robert and Farnish, Richard (2011) Methods for design of hoppers. Silos, bins and bunkers for reliable gravity flow, for pharmaceutical, food, mineral and other applications. In: BulkSolids India 2011, 6-8 April 2011, Mumbai, India. (Unpublished)

Bradley, Michael, Farnish, Richard and Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317 (2011) Predicting and preventing wear in pneumatic conveying systems. In: BulkSolids India 2011, 6-8 April 2011, Mumbai, India. (Unpublished)

Bradley, Michael and Garg, Vivek ORCID: https://orcid.org/0000-0002-8515-4759 (2024) On the convergent flow property behaviour of different fine dry powders across wide size ranges, and the concept of critical particle size. In: 11th International Conference on Conveying and Handling of Particulate Solids, 2nd -4th Sep., 2024, Edinburgh. (In Press)

Bradley, Michael S. A., Berry, Rob, Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia. (Unpublished)

Bradley, Michael S.A., Berry, Rob, Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction tester and test procedure, suitable for equipment design and powder characterisation. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)

Bradley, Michael S.A., Farnish, Richard J., Reed, Alan R. and Kulkarni, Prasanna (2007) Evaluation of air induced segregation tendencies in pharmaceutical blends using a bench scale tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)

Bradley, Mike and Wardle, J. P. (2019) Powder Flow in the AM Process: Understanding its impact and potential problems. In: IDTechEX, 10-11 April 2019, Estrel Convention Center, Berlin, Germany. (Unpublished)

Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317, Garg, Vivek ORCID: https://orcid.org/0000-0002-8515-4759 and Bradley, Michael (2024) Effects of electrostatic charge on particle adhesion, cohesiveness and its influences on powder flow properties. In: 11th International Conference on Conveying and Handling of Particulate Solids, 2nd -4th Sep., 2024, Edinburgh. (Unpublished)

Farnish, R. J. (2007) Gravity discharge of powders at high flux densities through the exploitation of intensified gas induction effects. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, ICBMH 2007. University of Newcastle, Newcastle, NSW, Australia, 2007, University of Newcastle, New South Wales, Australia.

Garg, Vivek ORCID: https://orcid.org/0000-0002-8515-4759, Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317 and Bradley, Michael (2024) Effects of relative humidity and temperature on particle adhesion measurements using mechanical surface energy tester. In: 11th International Conference on Conveying and Handling of Particulate Solids, 2nd -4th Sep., 2024, Edinburgh. (In Press)

Garg, Vivek ORCID: https://orcid.org/0000-0002-8515-4759, Deng, Tong ORCID: https://orcid.org/0000-0003-4117-4317, Sousa, Lucas Massaro and Bradley, Michael (2024) Evaluation of segregation of pharmaceutical formulations in direct compression process. In: 11th International Conference on Conveying and Handling of Particulate Solids, 2nd -4th Sep., 2024, Edinburgh. (In Press)

Hussaini, Zaki, Kaur, Baldeep ORCID: https://orcid.org/0000-0002-1762-3058, Sharma, Atul ORCID: https://orcid.org/0000-0002-6756-4148, Hancock, Ian and Bradley, Michael (2024) Ultrafine air-classification of plant based proteins: a step towards reducing carbon footprints. In: CHoPS 2024: 11th International Conference on Conveying and Handling of Particulate Solids, 2nd - 4th Sep., 2024, Edinburgh.

Kaur, Baldeep ORCID: https://orcid.org/0000-0002-1762-3058 and Bradley, Michael (2024) Moisture migration dynamics in speciality sugars. In: Sorption Symposium Europe 2024, 18th - 20th Sep., 2024, University of Vienna, Vienna, Austria. (Unpublished)

Kaur, Baldeep ORCID: https://orcid.org/0000-0002-1762-3058 and Bradley, Michael (2024) The future: CO2 absorption (carbonation) and bulk materials handling. In: CHoPS 2024: 11th International Conference on Conveying and Handling of Particulate Solids, 2nd - 4th Sep., 2024, Edinburgh.

Owonikoko, A., Berry, R.J. and Bradley, M.S.A. (2010) Characterisation of extreme shape materials: “biomass and waste materials”. In: Bulk Solids Europe 2010 Conference and IMechE Symposium in New Frontiers in Bulk Materials Handling, 9-10 September 2010, Glasgow. (Unpublished)

Premarathna, Chanaka Prasad, Kaur, Baldeep ORCID: https://orcid.org/0000-0002-1762-3058, Salehi Kahrizsangi, Hamid ORCID: https://orcid.org/0000-0002-2516-6619, Ellis, Richard and Bradley, Michael S.A. (2024) Application of Principal Component Analysis (PCA) and regression with lagged variables to identify the effect of blower speed and feed rate in pneumatic conveying. In: CHoPS 2024: 11th International Conference on Conveying and Handling of Particulate Solids, 2nd - 4th Sep., 2024, Edinburgh.

Ribeiro, Kandice Suane Barros, Farnish, Richard J. and Coelho, Reginaldo Teixeira (2019) Evaluation of the Restricted Air Entry on the Discharge Rate from Silos. In: 25th ABCM International Congress of Mechanical Engineering, 20-25 October 2019, Uberlandia, MG, Brazil.

Sarnavi, Hamed J. and Bradley, Michael (2024) On the effect of powder cohesion on the location of Geldart Group A to Group C fluidisation boundaries. In: CHoPS 2024: 11th International Conference on Conveying and Handling of Particulate Solids, 2nd-4th of September, 2024, Edinburgh.

Sparrow, R. D., Adekunle, Andrew, Berry, Robert and Farnish, Richard (2015) Study of two security constructs on throughput for wireless sensor multi-hop networks. In: 38th International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO), 2015, 25-29th May, Opatija. (doi:10.1109/MIPRO.2015.7160476)

Thesis

Santana Perdomo, Jose Carmelo (2015) Development of a test protocol for industry to predict and optimise flow behaviour of blended powders utilising particle to bulk scale models. PhD thesis, University of Greenwich.

Patent

Bhatia, Pramod; Garg, Vivek et al. (Patent No: 20 2022 102 590.8) (2022) Intelligent seating system based on IoT and machine learning. .

Michael Bradley (2017) Apparatus comprising a microwave processing chamber. http://www.freepatentsonline.com/y2019/0127645.html.

The University Of Greenwich (2017) STENT WO 2016116748 A1. WO 2016116748 A1.

114312 (2022) Medical suction pump controller - Certificate of Registration of Design No 360064-001. .

Vivek Garg (2021) Computer implemented method for scanning for determining characteristics of materials using Artificial Intelligence. .

Vargis, Binu Kuriakose; Garg, Vivek et al. (Patent No: 345596-001) (2022) Modified design for toilet seat for urination and defecation. .

Vivek Garg (2021) A honeypot based network security system. .

Other

Nwajana, Augustine ORCID: https://orcid.org/0000-0001-6591-5269 and Okafor, Patrick (2023) Call for Papers for Frontiers in Mechanical Engineering Special Issue: RFID and RF Circuits/Components. Frontiers Media.