Items where Subject is "T Technology > TJ Mechanical engineering and machinery"

A

Anthony, Richard, Chen, Dejiu, Pelc, Mariusz, Persson, Magnus and Torngren, Martin (2009) Context-aware adaptation in DySCAS. Electronic Communications of the EASST, 19. ISSN 1863-2122

B

Bailey, Christopher, Clapham, S., Cross, Mark, Dixon, T., Wolfe, S. and Norman, P. (1996) Modelling stress evolution during cable fabrication. ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 76 (Issue Supplement S4). pp. 97-100. ISSN ISSN: 0044-2267 (print), 1521-4001 (online) (doi:10.1002/zamm.19960761408)

Bailey, Chris, Lu, Hua and Yin, Chunyan (2010) Modelling reliability of power electronics packaging. In: Proceedings of the ASME InterPack Conference 2009, IPACK2009. American Society of Mechanical Engineers, New York, USA, pp. 215-220. ISBN 9780791843604 (doi:10.1115/InterPACK2009-89430)

Baxter, David, Rajkumar, Roy and Gao, James (2008) Design process knowledge reuse challenges and issues. Computer Aided Design and Applications, 5 (6). pp. 942-952. ISSN 1686-4360 (doi:10.3722/cadaps.2008.942-952)

Bojarevics, Valdis and Roy, Alan (2011) Effect of magnetic forces on bubble transport in aluminium electrolysis cells. In: Proceedings of the 8th PAMIR International Conference on Fundamental and Applied MHD. Laboratoire CNRS-EPM/SIMaP / Institute of Physics, University of Latvia, Corsica, France, pp. 453-457.

Bradley, M.S.A., Burnett, A.J. and Woodhead, Steve (1995) Measurement of pressure profiles in pneumatic conveying pipelines. In: 1995 IEEE Instrumentation and Measurement Technology. Institute of Electrical and Electronics Engineers, New York, pp. 766-769. ISBN 978-0780326156 (doi:10.1109/IMTC.1995.515419)

Burnett, A. J. (1993) Wear in pneumatic conveying pipelines. Powder Handling and Processing, 15 (2). pp. 123-128. ISSN 0934-7348

Burnett, Anthony John (1996) The use of laboratory erosion tests for the prediction of wear in pneumatic conveyor bends. PhD thesis, University of Greenwich.

C

Chapelle, Pierre, Abou-Chakra, Hadi, Christakis, Nicholas, Patel, Mayur, Abu-Nahar, Azlina, Tüzün, Ugur and Cross, Mark (2004) Computational model for prediction of particle degradation during dilute phase pneumatic conveying: the use of a laboratory scale degradation tester for the determination of degradation propensity. Advanced Powder Technology, 15 (1). pp. 13-29. ISSN 0921-8831 (doi:10.1163/15685520460740043)

Chen, H., Yu, W., Cargill, S., Patel, M.K., Bailey, C., Tonry, C. and Desmulliez, M.P.Y. (2012) Self-encapsulated hollow microstructures formed by electric field-assisted capillarity. Microfluidics and Nanofluidics, 13 (1). pp. 75-82. ISSN 1613-4982 (Print), 1613-4990 (Online) (doi:10.1007/s10404-012-0942-6)

Chen, Li Choo (2007) Optimisation of rule-based testing for scheduling within a distributed computing environment. PhD thesis, University of Greenwich.

Chow, Peter M-Y (1993) Control volume unstructured mesh procedure for convection-diffusion solidification processes. PhD thesis, University of Greenwich.

D

Deng, Tong, Farnish, Richard J. and Bradley, Michael S.A. (2008) Evaluation of particle degradation due to high-speed impacts in a pneumatic handling system. Particulate Science and Technology, 26 (5). pp. 438-450. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:10.1080/02726350802367522)

F

Fei, Genyuan, Gao, James, Owodunni, Oladele and Tang, X. Q. (2009) A methodology for engineering design change management using modelling and problem solving techniques. In: Proceedings of the 36th International MATADOR Conference. Springer, US, pp. 179-182. ISBN 978-1-84996-432-6_41 (doi:10.1007/978-1-84996-432-6_41)

G

Gradin, P.A., Graham, D., Nygård, P. and Vallen, H. (2008) The use of acoustic emission monitoring to rank paper materials with respect to their fracture toughness. Experimental Mechanics, 48 (1). pp. 133-137. ISSN 0014-4851 (Print), 1741-2765 (Online) (doi:10.1007/s11340-007-9055-7)

H

Hanson, Robert (2001) A model to predict the lifetime of pneumatic conveyor bends. PhD thesis, University of Greenwich.

Hettiaratchi, Kaushika (2006) A comparison between the pressure gradients in vertical and horizontal pneumatic conveying, with an investigation into the effect of pipeline bore in vertical conveying. PhD thesis, University of Greenwich.

Hinduja, S., Mansor, M.S.A. and Owodunni, O.O. (2010) Voronoi-diagram-based linking of contour-parallel tool paths for two-and-a-half-dimensional closed-pocket machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (9). pp. 1329-1350. ISSN 0954-4054 (Print), 2041-2975 (Online) (doi:10.1243/09544054JEM1596)

J

Jones, Mark G. (1988) The influence of bulk particulate properties on pneumatic conveying performance. PhD thesis, Thames Polytechnic.

K

Kao, A. and Pericleous, K. (2012) The effect of secondary arm growth on thermoelectric magnetohydrodynamics. Magnetohydrodynamics, 48 (2). pp. 361-370. ISSN 0024-998X

Kao, A. and Pericleous, K. (2012) A multi scale method for thermo-electric MHD in dendritic solidification. Journal of Iron and Steel International, 19 (S1-1). pp. 317-321. ISSN 1006-706X

Kessel, Stephen Ronald (1985) The interaction between rotary valves and pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

Khan, Naushad Salim (2008) Handling characteristics of coal/biomass mixes: measurements and establishing benchmarks. PhD thesis, University of Greenwich.

L

Li, Ji (2007) A study of the solid particle erosion performance of automative and other novel low carbon steels. PhD thesis, University of Greenwich.

M

Malik, Asif, Hughes, Michael and Bailey, Christopher (2006) Optoelectronic packaging interfaces for submicron alignment (OPISA) and the dynamics of laser spot weld formation. In: Proceedings of the 1st Electronics Systemintegration Technology Conference, 2006. IEEE, pp. 387-391. ISBN 1 4244 0552 1 (doi:10.1109/ESTC.2006.280031)

Mountney, Sara, Roy, Rajkumar and Gao, James (2011) Acquiring innovative manufacturing engineering knowledge for the preliminary design of complex mechanical components. In: Global Product Development. Springer, Berlin / Heidelberg, pp. 457-464. ISBN 978-3-642-15973-2 (doi:10.1007/978-3-642-15973-2_46)

O

Owodunni, Oladele, Hinduja, Srichand, Mekid, Samir and Zia, Ahmad (2007) An investigation of optimum cutting conditions for STEP-NC turned features. In: Innovative Production Machines and Systems Conference 2007 (IPROMS), 2-13 July 2007, http://conference.iproms.org/ [Virtual Conference].

R

Ridout, Stephen, Bailey, Christopher, Dusek, Milos and Hunt, C (2007) Constitutive modeling of kinematic-hardening and damage in solder joints. In: Proceedings of the 1st Electronics Systemintegration Technology Conference, 2006. IEEE , pp. 927-933. ISBN 1-4244-0552-1 (doi:10.1109/ESTC.2006.280122)

S

Sahatoo, Divesh, Chowdary, Boppana V., Ali, Fahraz F. and Bhatti, Rajinderpal (2008) Slicing issues in CAD translation to STL in rapid prototyping. In: Proceedings of The 2008 IAJC-IJME International Conference. International Association of Journals and Conferences/International Journal of Modern Engineering, California State University, Northridge. ISBN 9781606433799

Schuster, T., Bradley, M.S.A. and Reed, Alan R. (1995) The dependence of power consumption of pneumatic conveying systems upon bulk material properties, pipeline bore and routing, and mode of flow. Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering, 209 (E1). pp. 69-75. ISSN 0954-4089 (Print) 2041-3009 (Online) (doi:10.1243/PIME_PROC_1995_209_230_02)

Sinclair, Keith I., Goussetis, George, Desmulliez, Marc P.Y., Sangster, Alan J., Tilford, Tim, Bailey , Chris and Parrott, Kevin (2009) Polymer curing within an optimised open-ended microwave oven. In: European Microwave Week 2008, “Bridging Gaps”, Conference Proceedings,. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 17-20. ISBN 978-2-87487-006-4 (doi:10.1109/EUMC.2008.4751375)

Soper, Alan and Strusevich, Vitaly A. (2006) Two-machine flow shop scheduling with an interstage transporter: two shipments. In: Information Control Problems in Manufacturing 2006: A Proceedings volume from the 12th IFAC International Symposium, St Etienne, France, 17-19 May 2006. IFAC Proceedings Volumes, 3 . Elsevier Ltd., Oxford, UK, pp. 27-32. ISBN 978-0-08-044654-7

Sutharssan, T., Stoyanov, S., Bailey, C. and Rosunally, Y. (2012) Data analysis techniques for real-time prognostics and health management of semiconductor devices. In: Microelectronics and Packaging. Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ, USA, pp. 1-7. ISBN 978-1-4673-0694-2 (print)

Sutharssan, Thamo, Bailey, Chris, Stoyanov, Stoyan and Rosunally, Yasmine (2011) Prognostics and reliability assessment of light emitting diode packaging. In: Electronic Packaging Technology and High Density Packaging (ICEPT-HDP), 2011 12th International Conference on. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 1-7. ISBN 978-1-4577-1770-3 (print), 978-1-4577-1768-0 (eISBN) (doi:10.1109/ICEPT.2011.6066984)

Sutharssan, Thamo, Stoyanov, Stoyan, Bailey, Christopher and Rosunally, Yasmine (2012) Prognostics and health monitoring of high power LED. Micromachines, 3 (1). pp. 78-100. ISSN 2072-666X (doi:DOI: 10.3390/mi3010078)

T

Tang, Ying Kit (2012) A risk analysis methodology for micro/nano manufacturing. PhD thesis, University of Greenwich.

Taylor, Gareth Anthony (1996) A vertex based discretisation scheme applied to material non-linearity within a multi-physics finite volume framework. PhD thesis, University of Greenwich.

U

Umeadi, Boniface B.N. (2010) An investigation into the potential of advanced sensor technology to support the maintenance of pipeline distribution systems. PhD thesis, University of Greenwich.

Umeadi, Bonny B.N. and Jones, K.G. (2008) The development of an intelligent sensor for the monitoring of pipeline system integrity. In: SPE Russian oil and gas technical conference and exhibition 2008 : 28-30 October 2008, Moscow, Russia. Society of Petroleum Engineers, New York, USA. ISBN 9781605607795 (doi:10.2118/115503-MS)

V

van Manen, P. (1984) The dynamic behaviour of rail vehicles operating at high speeds for manriding in British coal mines. PhD thesis, Thames Polytechnic.

W

Wang, Zhaozhi, Galea, Edwin R., Jia, Fuchen, Ewer, John and Patel, Mayur (2007) Predicting HCI concentrations in fire enclosures using a HCI decay model coupled to a CFD based fire field model. Fire and Materials, 31 (7). pp. 443-461. ISSN 0308-0501 (doi:10.1002/fam.942)

Woodcock, C. R. (1978) The flow of particulate bulk solids in an air-assisted gravity conveyor. PhD thesis, Thames Polytechnic.