Skip navigation

Items where Subject is "T Technology > TJ Mechanical engineering and machinery"

Items where Subject is "T Technology > TJ Mechanical engineering and machinery"

Up a level
Export as [feed] RSS
Group by: Creators | Item Type | Uncontrolled Keywords
(AET) (CC) (CFD) (CSM) (DC) (DFSI) (FE) (FV) (ISM) (MTO) (VB-CC) a-Fe AC acoustic emission Acoustic Emission Testing acoustics adhesive bonding adhesives advanced solidification processes AEAD constructs Affect algorithms alloy aluminum electrolysis cells aluminum ingots analysis anisotropic conductive films anisotropic magnetoresistance anisotropic media antenna interface applied mathematics approximation artificial intelligence (incl. robotics) assembly assembly scheduling problem atomic-scale automation automotive control auxetic materials availability constraints axisymmetric contraction batch availability batching biodeterioration testing laboratories biodeterioration testing manufacturing processes biomass materials biomass mixes bond failure bonding breakage matrices breakage matrix bubbles bulk properties bulk solid materials bulk solids handling technology bulk solids transport business information systems capillary carbon emissions case based engineering Case Based Reasoning casting casting process casting processes CBR CCM cell-centred CFD CFD pipe bends CFD modelling change management characteristics chip-on-board packaging circuit optimisation closed loop control coal coatings cognitive radio cold crucible cold crucible melting compartment fires complexity composite materials compuational fluid dynamics (CFD) computational analysis software computational constraints computational fluid dynamics computational modelling computational solid mechanics computational structural mechanics computer aided design (CAD) computer modelling computer simulation conductive adhesives constituitive modeling constitutive modelling construction industry contact resistance context-aware behaviour continuous casting continuum mechanics continuum modelling contour-parallel offset contraction flows conveying systems conveyor systems conveyors copper copper stockpile leach model core flow coupled fields crack modelling creep curves critical success factors (CSFs) CSM Cu-rich Cu-rich precipitates curing cutting conditions damage mechanics data driven prognostics data mining DC DCE decision support system degradation tester degradation toolkit dendritic growth deposition design design and manufacture design engineers design knowledge reuse design of experiments design process support dielectric losses dielectric materials dilute phase pneumatic conveying direct chill direct chill casting process direct search method discrete event simulation dispersion Distributed Computing Environment distributed generation distribution systems dynamic configuration dynamic fluid-structure interaction dynamics perturbation theory elasto-visco plasticity electrical engineering electrical power electrohydrodynamic electrolyte flow electromagnetic fields electromagnetic field electromagnetic force electromagnetic heating electromagnetic material processing electromagnetic processing electronic materials electronics emissions markets energy efficiency energy minimisation engineering engineering design Enterprise resource planning equipment testing erosion Eulerian event history analysis evolutionary algorithm evolutionary computation extrusion fatigue feature-based model filters finite element finite element analysis finite element method finite elements Finite Volume finite volume (FV) finite volume method finite volume methods finite volume unstructured mesh fire modelling fire simulation fire simulation software fires flip chip flip-chip flip-chip assembly flip-chip devices flow behaviour flow motion flow property measurement flow rate flow shop flow shop scheduling flow visualisation Fluid dynamics fluid flow fluid mechanics fluid structure fluid structure interaction fluid velocity fracture toughness Framework for machining optimisation free surface free surface dynamics frictional interface gas bubbles gas flow geometric conservation law geometry granular material graph traversal problem group technology handling health monitoring heat conductivity heat transfer High Performance Primitive Collections high-aspect ratio microfabrication high-speed impacts hollow microstucture HPPC hydraulic machinery hydraulic systems hydrogen chloride impact in-process measurement induction heating induction melting induction skull melting induction skull melting (ISM) industrial partners industrial plants industrial processes industry industry sectors inertia innovative manufacturing processes instabilities integrated integrated circuit integrated circuit interconnections integrated circuit reliability integrated optoelectronics interconnections interfaces (computer) irradiation-produced IT IT & software J-integral job shop kinematic-hardening knowledge sharing laboratories Lagrangian lase welding laser spot weld formation latency lead-free solders lean phase LEDs levitation modelling lifetime prediction light emitting diodes liquid metals machining optimisation magnetic forces magnetic levitation magnetic suspension Magnetohydrodynamicsm thermocapillary magneto–hydro-dynamics make to order make-to-order management systems manufacturing plant control manufacturing processes Marangoni effect materials materials handling equipment materials processing materials properties materials science mathematical logic and formal languages mathematical modelling mathematical models mathematics mechanical engineering mechanics melting metal casting metal welding metals reduction process micro manufacturing micro-generators micro-grids micro-mechanical parametrisations microfluidics micromachining micromechanical parametrisations microwave devices microwave ovens middleware millimeter wave mine railway safety minium wires mixture of job and open shops mobile and wireless communications mobile antennas mode shape expansion model testing modeling modelling modelling error modelling tools monitor morphology mould filling multi-agent systems multi-physics multi-scale modelling multi-scale simulations multiple-band antennas nano manufacturing negative Poisson’s ratio Networked Control Systems newmark algorithm Newton Raphson no-flow underfill materials no-wait in process non-linear non-Newtonian flow nonavailability interval nonlinear flow NP-hard NP-hard problem numerical approach numerical modelling numerical simulation oil Oldroyd B model open shop open shop scheduling OPISA optical backplanes optical backplanes optical planar waveguides optical waveguides photodiodes optimal scheduling optoelectronic packaging packaging parallel dedicated machines particle degradation particulate solids Perception PHM PHYSICA PHYSICA+ pipe pipeline pipeline route pipeline systems pipelines pipes planar contraction plates pneumatic conveying pneumatic conveying pipelines pneumatic conveying systems pneumatic conveyors pneumatic machinery pneumatic systems pocket machining policy-based configuration polymer films polymers polynomial algorithm polynomial-time algorithm power electronics devices power generation precedence constraints precision machining prediction models pressure vessels probability theory problem solving process engineering product design product knowledge analysis product modelling prognostics prognostics health management Prosthetic design Prosthetics prototypes pumping machinery pumps pure mathematics rapid prototyping real-time embedded systems real-time systems reflow soldering relational structures reliability reliable electronic packaging remaining life report resource constraints rheology safety measures scanning electron microscopy (SEM) scheduling scheduling applications security security constructs segregation semi-Lagrangian semi-Lagrangian approach semiconductor device modeling semiconductor technology similarity measure simulation small and medium size enterprises SMARTFIRE SMEs software systems solder joints solder paste soldering solders solid mass solid mechanics solid particle erosion solid particle impact solidification solidification phase change solidification processes SPE spectrum sensing stacked microstrip antennas Stationary welding STEP-NC STL stress stress analysis stress singularity suction nozzles surface emitting lasers surface morphology surface topography surface treatment suspension Sustainability of manufacturing Sustainability performance sustainable energy sustainable machining operation SysML telecommunications temperature testing thermal expansion thermal management thermo-mechanical behaviors Thermocapillary flows thermoelectric MHD thermomechanical analysis throughput titanium aluminide tool path linking topology optimisation transient structural dynamics transport systems tribology Triz tubing tubing & valves turbulent flow turbulent fluid flow turning operations two phase flow Uncanny valley unmanned aerial vehicles valves vectors vehicles vertex-based - cell-centred vibration virtual manufacturing Virtual Power Plants viscoelastic flow viscoelastic methods viscoelasticity wave soldering waveguide components wear of materials wear rig Welding welding arc welding processes wide area wireless wireless network systems Wireless Sensor Networks wireless-sensors work load control worst-case analysis α-Fe
Number of items at this level: 608.

(AET)

Gradin, P., Vallen, H., Graham, D., Nygard, P. and Gregersen, Ø.W. (2004) Acoustic emission testing of paper. In: Proceedings of the 2004 Progress in Paper Physics Seminar. NTNU (Norwegian University of Science and Technology) and PFI (Paper and Fibre Research Institute), Trondheim, Norway, p. 155. (Unpublished)

(CC)

McBride, Diane, Croft, Nick and Cross, Mark (2003) Combined vertex-based - cell-centred finite volume method for flows in complex geometries. In: The 3rd International Conference on CFD in the Minerals and Process Industries [Proceedings]. CSIRO Publishing, Collingwood, Victoria, Australia, pp. 351-356. ISBN 978064309038X

(CFD)

Christakis, Nicholas, Chapelle, Pierre, Patel, Mayur K. and Cross, Mark (2006) On the continuum modelling of segregation of granular mixtures during hopper emptying in core flow mode. In: European Conference on Computational Fluid Dynamics ECCOMAS CFD 2006 Proceedings. TU Delft, The Netherlands, The Netherlands. ISBN 9090209700

McBride, Diane, Croft, Nick and Cross, Mark (2003) Combined vertex-based - cell-centred finite volume method for flows in complex geometries. In: The 3rd International Conference on CFD in the Minerals and Process Industries [Proceedings]. CSIRO Publishing, Collingwood, Victoria, Australia, pp. 351-356. ISBN 978064309038X

Slone, A.K., Williams, A.J., Grossman, D., Croft, T.N. and Cross, M. (2003) A generic time and space accurate numerical approach to closely coupled fluid-structure interaction problems. In: NAFEMS World Congress 2003, 2003, Orlando, Florida, USA.

(CSM)

Slone, A.K., Williams, A.J., Grossman, D., Croft, T.N. and Cross, M. (2003) A generic time and space accurate numerical approach to closely coupled fluid-structure interaction problems. In: NAFEMS World Congress 2003, 2003, Orlando, Florida, USA.

(DC)

Williams, A.J., Croft, T.N. and Cross, M. (2003) Modeling of ingot development during the start-up phase of direct chill casting. Metallurgical and Materials Transactions B, 34 (5). pp. 727-734. ISSN 1073-5615 (Print), 1543-1916 (Online) (doi:10.1007/s11663-003-0042-9)

(DFSI)

Slone, A.K., Pericleous, K., Bailey, C. and Cross, M. (2001) Details of an integrated approach to three-dimensional dynamic fluid structure interaction. In: Fluid Structure Interaction. WIT Press, Southampton, UK, pp. 57-66. ISBN 1853128813 ISSN 1353-808x

(FE)

Slone, A.K., Williams, A.J., Grossman, D., Croft, T.N. and Cross, M. (2003) A generic time and space accurate numerical approach to closely coupled fluid-structure interaction problems. In: NAFEMS World Congress 2003, 2003, Orlando, Florida, USA.

(FV)

Croft, T.N., Pericleous, K.A., Bobadilla, M. and Gardin, P. (2002) Three-phase computations of the continuous casting process. In: Proceedings of the 4th European Continuous Casting Conference. IOM Communications Ltd, London, England, UK, pp. 545-554.

(ISM)

Bojarevics, V., Djambazov, G., Harding, R.A., Pericleous, K. and Wickins, M. (2002) Investigation of the cold crucible melting process: experimental and numerical study. In: Proceedings of the 5th International pamir Conference. Cost P6 Annual Workshop 2002. Fundamental and Applied MHD. International pamir Conference, II.77-II.82.

(MTO)

Pillai, Sreejit, Arokiam, Alan, Bhatti, Raj and Collins, T. (2011) Make to order manufacturing and operational management strategies – a case study at Priorclave Ltd. In: 18th International Annual EurOMA Conference: Exploring Interfaces, 3-6 Jul 2011, Cambridge, UK. (Unpublished)

(VB-CC)

McBride, Diane, Croft, Nick and Cross, Mark (2003) Combined vertex-based - cell-centred finite volume method for flows in complex geometries. In: The 3rd International Conference on CFD in the Minerals and Process Industries [Proceedings]. CSIRO Publishing, Collingwood, Victoria, Australia, pp. 351-356. ISBN 978064309038X

a-Fe

Arokiam, A. C., Barashev, A. V., Bacon, D. J. and Osetsky, Yu. N. (2006) Characteristics of the interaction of Cu-rich precipitates with irradiation-produced defects in α-Fe. Philosophical Magazine Letters, 85 (9). pp. 491-501. ISSN 0950–0839 (Print), 1362–3036 (Online) (doi:/10.1080/09500830500300047)

AC

Bojarevics, V. and Pericleous, K. (2003) AC and DC magnetic levitation: melting, fluid flow and oscillations. In: 4th International Conference on Electromagnetic Processing of Materials, 14-17 Oct 2003, Lyon, France.

acoustic emission

Gradin, P.A., Graham, D., Nygård, P. and Vallen, H. (2007) The use of acoustic emission monitoring to rank paper materials with respect to their fracture toughness. Experimental Mechanics, 48 (1). pp. 133-137. ISSN 0014-4851 (Print), 1741-2765 (Online) (doi:10.1007/s11340-007-9055-7)

Acoustic Emission Testing

Gradin, P., Vallen, H., Graham, D., Nygard, P. and Gregersen, Ø.W. (2004) Acoustic emission testing of paper. In: Proceedings of the 2004 Progress in Paper Physics Seminar. NTNU (Norwegian University of Science and Technology) and PFI (Paper and Fibre Research Institute), Trondheim, Norway, p. 155. (Unpublished)

acoustics

Xu, Sha, Chan, Yan Cheong, Zhu, Xiaoxin, Lu, Hua and Bailey, Chris (2014) Effective method to disperse and incorporate carbon nanotubes in electroless Ni-P deposits. In: 2014 IEEE 64th Electronic Components and Technology Conference (ECTC) Proceedings. Curran Associates, Stoughton, WI, USA, pp. 1342-1347. ISBN 9781479924080 (doi:10.1109/ECTC.2014.6897466)

adhesive bonding

Yin, C.Y., Lu, H., Bailey, C. and Chan, Y.C. (2004) Effects of reflow process on the reliability of flip chip on flex interconnections using anisotropic conductive adhesives. In: 2004 International IEEE Conference on Asian Green Electronics (AGEC) [Proceedings]. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 240-245. ISBN 0-7803-8203-X (doi:10.1109/AGEC.2004.1290912)

adhesives

Yin, Chunyan, Lu, Hua, Bailey, Chris and Chan, Yan-Cheong (2004) Effects of solder reflow on the reliability of flip-chip on flex interconnections using anisotropic conductive adhesives. IEEE Transactions on Electronics Packaging Manufacturing, 27 (4). pp. 254-259. ISSN 1521-334X (doi:10.1109/TEPM.2004.843152)

advanced solidification processes

Mileman, T.J., Knight, B., Cowell, D.F. and Preddy, K.L. (1998) Cast-aid: a decision support system for designing castings. In: 8th International conference on Modeling of Casting and Welding Processes. Minerals, Metals & Materials Society, Warrendale, PA, USA, pp. 1087-1094. ISBN 0873394070

AEAD constructs

Sparrow, R. D., Adekunle, Andrew, Berry, Robert and Farnish, Richard (2015) Study of two security constructs on throughput for wireless sensor multi-hop networks. In: 38th International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO), 2015, 25-29th May, Opatija. (doi:10.1109/MIPRO.2015.7160476)

Affect

Poliakoff, Ellen, O’Kane, Sophie, Carefoot, Olivia, Kyberd, J and Gowen, Emma (2018) Investigating the Uncanny Valley for prosthetic hands. Prosthetics and Orthotics International, 42 (1). pp. 21-27. ISSN 0309-3646 (doi:10.1177/039364617744083)

algorithms

Lai, C.-H., Ierotheou, C.S., Palansuriya, C.J. and Pericleous, K.A. (2001) Domain decomposition methods for welding problems. In: 12th International Conference on Domain Decomposition Methods in Sciences and Engineering. ddm.org, pp. 411-419.

Sutharssan, Thamo, Bailey, Chris, Stoyanov, Stoyan and Rosunally, Yasmine (2011) Prognostics and reliability assessment of light emitting diode packaging. In: Electronic Packaging Technology and High Density Packaging (ICEPT-HDP), 2011 12th International Conference on. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 1-7. ISBN 978-1-4577-1770-3 (print), 978-1-4577-1768-0 (eISBN) (doi:10.1109/ICEPT.2011.6066984)

Tavakoli Dehkordi, Anousheh (2015) Optimisation and algorithms in wireless networks for mission critical applications. PhD thesis, University of Greenwich.

Taylor, Gareth Anthony (1996) A vertex based discretisation scheme applied to material non-linearity within a multi-physics finite volume framework. PhD thesis, University of Greenwich.

alloy

Kumar, Santosh, Mallik, Sabuj, Ekere, Ndy and Jung, Jaepil (2013) Stencil Printing Behavior of Lead-Free Sn-3Ag-0.5Cu Solder Paste for Wafer Level Bumping for Sub-100 μm Size Solder Bumps. Metals and Materials International, 19 (5). pp. 1083-1090. ISSN 1598-9623 (Print), 2005-4149 (Online) (doi:10.1007/s12540-013-5025-z)

aluminum electrolysis cells

Panaitescu, Ileana, Repetto, Maurizio, Leboucher, Laurent and Pericleous, Kyriacos (2000) Magneto-hydro-dynamic analysis of an electrolysis cell for aluminum production. IEEE Transactions on Magnetics, 36 (4). pp. 1305-1308. ISSN 0018-9464 (doi:10.1109/20.877679)

aluminum ingots

Williams, A.J., Croft, T.N. and Cross, M. (2003) Modeling of ingot development during the start-up phase of direct chill casting. Metallurgical and Materials Transactions B, 34 (5). pp. 727-734. ISSN 1073-5615 (Print), 1543-1916 (Online) (doi:10.1007/s11663-003-0042-9)

analysis

Umeadi, Bonny B.N. and Jones, K.G. (2008) The development of an intelligent sensor for the monitoring of pipeline system integrity. In: SPE Russian oil and gas technical conference and exhibition 2008 : 28-30 October 2008, Moscow, Russia. Society of Petroleum Engineers, New York, USA. ISBN 9781605607795 (doi:10.2118/115503-MS)

Yin, C.Y., Lu, H., Bailey, C. and Chan, Y.C. (2004) Effects of reflow process on the reliability of flip chip on flex interconnections using anisotropic conductive adhesives. In: 2004 International IEEE Conference on Asian Green Electronics (AGEC) [Proceedings]. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 240-245. ISBN 0-7803-8203-X (doi:10.1109/AGEC.2004.1290912)

anisotropic conductive films

Yin, C.Y., Lu, H., Bailey, C. and Chan, Y.C. (2003) Experimental and modeling analysis of the reliability of the anisotropic conductive films. In: 2003 Proceedings 53rd Electronic Components & Technology Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 698-702. ISBN 0780377915 ISSN 0569-5503 (doi:10.1109/ECTC.2003.1216359)

anisotropic magnetoresistance

Yin, C.Y., Lu, H., Bailey, C. and Chan, Y.C. (2003) Experimental and modeling analysis of the reliability of the anisotropic conductive films. In: 2003 Proceedings 53rd Electronic Components & Technology Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 698-702. ISBN 0780377915 ISSN 0569-5503 (doi:10.1109/ECTC.2003.1216359)

anisotropic media

Yin, Chunyan, Lu, Hua, Bailey, Chris and Chan, Yan-Cheong (2004) Effects of solder reflow on the reliability of flip-chip on flex interconnections using anisotropic conductive adhesives. IEEE Transactions on Electronics Packaging Manufacturing, 27 (4). pp. 254-259. ISSN 1521-334X (doi:10.1109/TEPM.2004.843152)

antenna interface

Sagor, Md. Hasanuzzaman (2014) Differentially fed active antennas. PhD thesis, University of Greenwich.

applied mathematics

Chow, Peter M-Y (1993) Control volume unstructured mesh procedure for convection-diffusion solidification processes. PhD thesis, University of Greenwich.

Chow, Peter M-Y (1993) Control volume unstructured mesh procedure for convection-diffusion solidification processes. PhD thesis, University of Greenwich.

approximation

Kelleler, H. and Strusevich, V.A. (2003) Scheduling problems for parallel dedicated machines under multiple resource constraints. Discrete Applied Mathematics, 133 (1-3). pp. 45-68. ISSN 0166-218X (doi:10.1016/S0166-218X(03)00433-5)

Kovalyov, M.Y., Potts, C.N. and Strusevich, V.A. (2003) Batching decisions for assembly production systems. European Journal of Operational Research, 157 (3). pp. 620-642. ISSN 0377-2217 (doi:10.1016/S0377-2217(03)00250-9)

Strusevich, V.A. (2000) Group technology approach to the open shop scheduling problem with batch setup times. Operations Research Letters, 26 (4). pp. 181-192. ISSN 0167-6377 (doi:10.1016/S0167-6377(00)00021-3)

artificial intelligence (incl. robotics)

Mileman, Tony, Knight, Brian, Petridis, Miltos, Preddy, Keith and Mejasson, Patrick (2000) Maintenance of a case-base for the retrieval of rotationally symmetric shapes for the design of metal castings. In: Blanzieri, Enrico and Portinale, Luigi, (eds.) Advances in Case-Based Reasoning: 5th European Workshop, EWCBR 2000 Trento, Italy, September 6–9, 2000 Proceedings. Lecture Notes in Computer Science: Lecture Notes in Artificial Intelligence (1898). Springer Berlin Heidelberg, Berlin, Heidelberg, Germany, pp. 418-430. ISBN 9783540679332 ISSN 0302-9743 (doi:10.1007/3-540-44527-7_36)

Woon, Fei Ling, Knight, Brian, Petridis, Miltos and Patel, Mayur (2005) CBE-conveyor: a case-based reasoning system to assist engineers in designing conveyor systems. In: Case-Based Reasoning Research and Development: 6th International Conference on Case-Based Reasoning, ICCBR 2005, Chicago, IL, USA, August 23-26, 2005. Proceedings. Lecture Notes in Computer Science (3620). Springer Berlin Heidelberg, Berlin, Heidelberg, Germany, pp. 640-651. ISBN 9783540281740 (doi:10.1007/11536406_48)

assembly

Sinclair, Keith I., Goussetis, George, Desmulliez, Marc P.Y., Sangster, Alan J., Tilford, Tim, Bailey, Chris and Parrott, Kevin (2009) Polymer curing within an optimised open-ended microwave oven. In: European Microwave Week 2008, “Bridging Gaps”, Conference Proceedings,. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 17-20. ISBN 978-2-87487-006-4 (doi:10.1109/EUMC.2008.4751375)

Yin, C.Y., Lu, H., Bailey, C. and Chan, Y.C. (2003) Experimental and modeling analysis of the reliability of the anisotropic conductive films. In: 2003 Proceedings 53rd Electronic Components & Technology Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 698-702. ISBN 0780377915 ISSN 0569-5503 (doi:10.1109/ECTC.2003.1216359)

assembly scheduling problem

Kovalyov, M.Y., Potts, C.N. and Strusevich, V.A. (2003) Batching decisions for assembly production systems. European Journal of Operational Research, 157 (3). pp. 620-642. ISSN 0377-2217 (doi:10.1016/S0377-2217(03)00250-9)

atomic-scale

Arokiam, A. C., Barashev, A. V., Bacon, D. J. and Osetsky, Y. N. (2007) Atomic-scale computer simulation study of the interaction of Cu-rich precipitates with irradiation-produced defects in α-Fe. Philosophical Magazine, 87 (6). pp. 925-943. ISSN 1478–6435 (Print), 1478–6443 (Online) (doi:10.1080/14786430601003908)

automation

Soper, Alan and Strusevich, Vitaly A. (2006) Two-machine flow shop scheduling with an interstage transporter: two shipments. In: Dolgui, Alexandre, Morel, Gerard and Pereira, Carlos Eduardo, (eds.) Information Control Problems in Manufacturing 2006: A Proceedings volume from the 12th IFAC International Symposium, St Etienne, France, 17-19 May 2006. IFAC Proceedings Volumes, 3 . Elsevier Ltd., Oxford, UK, pp. 27-32. ISBN 978-0-08-044654-7

automotive control

Anthony, Richard, Chen, DeJiu, Pelc, Mariusz, Persson, Magnus and Tӧrngren, Martin (2009) Context-aware adaptation in DySCAS. Electronic Communications of the EASST, 19. ISSN 1863-2122

auxetic materials

Javadi, Akbar, Faramarzi, Asaad, Farmani, Raziyeh and Evans, Ken (2009) Design of microstructure and topological optimisation of auxetic materials. In: Proceedings of the 17th UK Conference on Computational Mechanics. Spencer Institute of Theoretical and Computational Mechanics, Unversity of Nottingham, Nottingham, UK, pp. 251-260. ISBN 9780853582557

availability constraints

Breit, J., Schmidt, G. and Strusevich, V.A. (2003) Non-preemptive two-machine open shop scheduling with non-availability constraints. Mathematical Methods of Operations Research, 57 (2). pp. 217-234. ISSN 1432-2994 (Print), 1432-5217 (Online) (doi:10.1007/s001860200267)

axisymmetric contraction

Phillips, T.N. and Williams, A.J. (2002) Comparison of creeping and inertial flow of an Oldroyd B fluid through planar and axisymmetric contractions. Journal of Non-Newtonian Fluid Mechanics, 108 (1-3). pp. 25-47. ISSN 0377-0257 (doi:10.1016/S0377-0257(02)00123-4)

batch availability

Kovalyov, M.Y., Potts, C.N. and Strusevich, V.A. (2003) Batching decisions for assembly production systems. European Journal of Operational Research, 157 (3). pp. 620-642. ISSN 0377-2217 (doi:10.1016/S0377-2217(03)00250-9)

batching

Kovalyov, M.Y., Potts, C.N. and Strusevich, V.A. (2003) Batching decisions for assembly production systems. European Journal of Operational Research, 157 (3). pp. 620-642. ISSN 0377-2217 (doi:10.1016/S0377-2217(03)00250-9)

Potts, C.N., Strusevich, V.A. and Tautenhahn, T. (2001) Scheduling batches with simultaneous job processing for two-machine shop problems. Journal of Scheduling, 4 (1). pp. 25-51. ISSN 1094-6136 (Print), 1099-1425 (Online) (doi:10.1002/1099-1425(200101/02)4:1<25::AID-JOS58>3.0.CO;2-7)

Strusevich, V.A. (2000) Group technology approach to the open shop scheduling problem with batch setup times. Operations Research Letters, 26 (4). pp. 181-192. ISSN 0167-6377 (doi:10.1016/S0167-6377(00)00021-3)

biodeterioration testing laboratories

Burnett, Anthony John (1996) The use of laboratory erosion tests for the prediction of wear in pneumatic conveyor bends. PhD thesis, University of Greenwich.

biodeterioration testing manufacturing processes

Burnett, Anthony John (1996) The use of laboratory erosion tests for the prediction of wear in pneumatic conveyor bends. PhD thesis, University of Greenwich.

biomass materials

Owonikoko, Aminu (2012) Predicting storage vessel geometry requirements for discharge of extreme shape materials. MPhil thesis, University of Greenwich.

biomass mixes

Khan, Naushad Salim (2008) Handling characteristics of coal/biomass mixes: measurements and establishing benchmarks. PhD thesis, University of Greenwich.

bond failure

Gradin, P.A., Graham, D., Nygård, P. and Vallen, H. (2007) The use of acoustic emission monitoring to rank paper materials with respect to their fracture toughness. Experimental Mechanics, 48 (1). pp. 133-137. ISSN 0014-4851 (Print), 1741-2765 (Online) (doi:10.1007/s11340-007-9055-7)

bonding

Kumar, Santosh, Mallik, Sabuj, Ekere, Ndy and Jung, Jaepil (2013) Stencil Printing Behavior of Lead-Free Sn-3Ag-0.5Cu Solder Paste for Wafer Level Bumping for Sub-100 μm Size Solder Bumps. Metals and Materials International, 19 (5). pp. 1083-1090. ISSN 1598-9623 (Print), 2005-4149 (Online) (doi:10.1007/s12540-013-5025-z)

breakage matrices

Deng, Tong, Farnish, Richard J. and Bradley, Michael S.A. (2008) Evaluation of particle degradation due to high-speed impacts in a pneumatic handling system. Particulate Science and Technology, 26 (5). pp. 438-450. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:10.1080/02726350802367522)

breakage matrix

Chapelle, Pierre, Abou-Chakra, Hadi, Christakis, Nicholas, Patel, Mayur, Abu-Nahar, Azlina, Tüzün, Ugur and Cross, Mark (2004) Computational model for prediction of particle degradation during dilute phase pneumatic conveying: the use of a laboratory scale degradation tester for the determination of degradation propensity. Advanced Powder Technology, 15 (1). pp. 13-29. ISSN 0921-8831 (doi:10.1163/15685520460740043)

bubbles

Cross, M., Croft, T.N., Djambazov, G. and Pericleous, K. (2003) Computational modelling of bubbles, droplets and particles in metals reduction and refining. In: The 3rd International Conference on CFD in the Minerals and Process Industries [Proceedings]. CSIRO Publishing, Collingwood, Victoria, Australia, pp. 47-52. ISBN 978064309038X

bulk properties

Jones, Mark G. (1988) The influence of bulk particulate properties on pneumatic conveying performance. PhD thesis, Thames Polytechnic.

bulk solid materials

Pittman, Andrew Nigel (1990) Suction nozzle feeding mechanisms and their effect on the performance of vacuum pneumatic conveying systems. MPhil thesis, Thames Polytechnic.

bulk solids handling technology

Owonikoko, Aminu (2012) Predicting storage vessel geometry requirements for discharge of extreme shape materials. MPhil thesis, University of Greenwich.

bulk solids transport

Woodcock, C. R. (1978) The flow of particulate bulk solids in an air-assisted gravity conveyor. PhD thesis, Thames Polytechnic.

business information systems

Woon, Fei Ling, Knight, Brian, Petridis, Miltos and Patel, Mayur (2005) CBE-conveyor: a case-based reasoning system to assist engineers in designing conveyor systems. In: Case-Based Reasoning Research and Development: 6th International Conference on Case-Based Reasoning, ICCBR 2005, Chicago, IL, USA, August 23-26, 2005. Proceedings. Lecture Notes in Computer Science (3620). Springer Berlin Heidelberg, Berlin, Heidelberg, Germany, pp. 640-651. ISBN 9783540281740 (doi:10.1007/11536406_48)

capillary

Chen, H., Yu, W., Cargill, S., Patel, M.K., Bailey, C., Tonry, C. and Desmulliez, M.P.Y. (2012) Self-encapsulated hollow microstructures formed by electric field-assisted capillarity. Microfluidics and Nanofluidics, 13 (1). pp. 75-82. ISSN 1613-4982 (Print), 1613-4990 (Online) (doi:10.1007/s10404-012-0942-6)

carbon emissions

Skarvelis-Kazakos, Spyros, Rikos, Evangelos, Kolentini, Efstathia, Cipcigan, Liana M. and Jenkins, Nick (2013) Implementing agent-based emissions trading for controlling Virtual Power Plant emissions. Electric Power Systems Research, 102. ISSN 0378-7796 (doi:10.1016/j.epsr.2013.04.004)

case based engineering

Woon, Fei Ling, Knight, Brian, Petridis, Miltos and Patel, Mayur (2005) CBE-conveyor: a case-based reasoning system to assist engineers in designing conveyor systems. In: Case-Based Reasoning Research and Development: 6th International Conference on Case-Based Reasoning, ICCBR 2005, Chicago, IL, USA, August 23-26, 2005. Proceedings. Lecture Notes in Computer Science (3620). Springer Berlin Heidelberg, Berlin, Heidelberg, Germany, pp. 640-651. ISBN 9783540281740 (doi:10.1007/11536406_48)

Case Based Reasoning

Woon, Fei Ling, Knight, Brian, Petridis, Miltos and Ward, Graham (2002) A case based model to assist in the design process in the manufacture of furniture products. Expert Update - The Specialist Group on Artificial intelligence, 5 (2). pp. 37-43. ISSN 1465-4091

casting

Williams, A.J., Croft, T.N. and Cross, M. (2003) Modeling of ingot development during the start-up phase of direct chill casting. Metallurgical and Materials Transactions B, 34 (5). pp. 727-734. ISSN 1073-5615 (Print), 1543-1916 (Online) (doi:10.1007/s11663-003-0042-9)

casting process

Cross, M., Williams, A., Bailey, C., Taylor, G.A., Pericleous, K. and Croft, T.N. (2000) Towards a comprehensive model of the direct chill casting process. In: Modeling of Casting, Welding and Advanced Solidification Processes IX [Proceedings]. Shaker, Aachen, Germany, pp. 713-720. ISBN 3826572300

casting processes

Mileman, T.J., Knight, B., Cowell, D.F. and Preddy, K.L. (1998) Cast-aid: a decision support system for designing castings. In: 8th International conference on Modeling of Casting and Welding Processes. Minerals, Metals & Materials Society, Warrendale, PA, USA, pp. 1087-1094. ISBN 0873394070

CBR

Woon, Fei Ling, Knight, Brian, Petridis, Miltos and Ward, Graham (2002) A case based model to assist in the design process in the manufacture of furniture products. Expert Update - The Specialist Group on Artificial intelligence, 5 (2). pp. 37-43. ISSN 1465-4091

CCM

Bojarevics, V. and Pericleous, K. (2001) Modelling induction melting energy savings. In: Proceedings of the International Colloquium. Modelling for Saving Resources. Riga, May 17-18, 2001. Laboratory for Mathematical Modelling of Environmental and Technological Processes, University of Latvia, Riga, Latvia, pp. 11-16. ISBN 998466189X

cell-centred

McBride, Diane, Croft, Nick and Cross, Mark (2003) Combined vertex-based - cell-centred finite volume method for flows in complex geometries. In: The 3rd International Conference on CFD in the Minerals and Process Industries [Proceedings]. CSIRO Publishing, Collingwood, Victoria, Australia, pp. 351-356. ISBN 978064309038X

CFD

Fallah, N.A., Bailey, C. and Cross, M. (2000) CFD approach for solid mechanics analysis. In: European Congress on Computational Methods in Applied Sciences and Engineering. ECCOMAS 2000. [Proceedings]. ECCOMAS.

Hanson, Robert (2001) A model to predict the lifetime of pneumatic conveyor bends. PhD thesis, University of Greenwich.

Jones, Mark G. (1988) The influence of bulk particulate properties on pneumatic conveying performance. PhD thesis, Thames Polytechnic.

Patel, M.K., Bailey, C., Djambazov, G., Shrimpton, J. and Jalili, V. (2003) Application of CFD in vacuum dezincing process. In: The 3rd International Conference on CFD in the Minerals and Process Industries [Proceedings]. CSIRO Publishing, Collingwood, Victoria, Australia, pp. 313-318. ISBN 978064309038X

Wang, Zhaozhi, Galea, Edwin R., Jia, Fuchen, Ewer, John and Patel, Mayur (2007) Predicting HCI concentrations in fire enclosures using a HCI decay model coupled to a CFD based fire field model. Fire and Materials, 31 (7). pp. 443-461. ISSN 0308-0501 (doi:10.1002/fam.942)

CFD pipe bends

Hanson, R., Allsopp, D., Deng, T., Smith, D., Bradley, M.S.A., Hutchings, I.M. and Patel, M.K. (2002) A model to predict the life of pneumatic conveyor bends. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 216 (3). pp. 143-149. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/095440802320225284)

CFD modelling

Hughes, Michael, Taylor, Gareth A. and Pericleous, Koulis (2000) Thermocapillary and magnetohydrodynamic effects in modelling the thermodynamics of stationary welding processes. Phoenics Journal of Computational Fluid Dynamics and Its Applications, 13 (1). pp. 99-113. ISSN 0969-8248

change management

Fei, Genyuan, Gao, James, Owodunni, Oladele and Tang, X. Q. (2009) A methodology for engineering design change management using modelling and problem solving techniques. In: Hinduja, Srichand and Li, Lin, (eds.) Proceedings of the 36th International MATADOR Conference. Springer, US, pp. 179-182. ISBN 978-1-84996-432-6_41 (doi:10.1007/978-1-84996-432-6_41)

characteristics

Arokiam, A. C., Barashev, A. V., Bacon, D. J. and Osetsky, Yu. N. (2006) Characteristics of the interaction of Cu-rich precipitates with irradiation-produced defects in α-Fe. Philosophical Magazine Letters, 85 (9). pp. 491-501. ISSN 0950–0839 (Print), 1362–3036 (Online) (doi:/10.1080/09500830500300047)

chip-on-board packaging

Gwyer, D., Misselbrook, P., Philpott, D., Bailey, C., Conway, P.P. and Williams, K. (2004) Thermal, mechanical and optical modelling of VCSEL packaging. In: The Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena In Electronic Systems (ITHERM 2004) [Proceedings]. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 405-410. ISBN 0780383575 ISSN 1089-9870 (doi:10.1109/ITHERM.2004.1318311)

circuit optimisation

Gwyer, D., Misselbrook, P., Bailey, C., Conway, P.P. and Williams, K. (2004) Polymer waveguide and VCSEL array multi-physics modelling for OECB based optical backplanes [opto-electrical circuit boards]. In: Proceedings of the 5th International Conference on Thermal and Mechanical Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2004. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 399-406. ISBN 0780384202 (doi:10.1109/ESIME.2004.1304070)

closed loop control

Sparrow, R. D., Adekunle, Andrew, Berry, Robert and Farnish, Richard (2015) Simulating and modelling the impact of secure communication latency for closed loop control. In: Internet Technologies and Applications (ITA), 2015. IEEE, Wrexham, UK, pp. 138-143. ISSN 9781479980369 (doi:10.1109/ITechA.2015.7317384)

coal

Khan, Naushad Salim (2008) Handling characteristics of coal/biomass mixes: measurements and establishing benchmarks. PhD thesis, University of Greenwich.

coatings

Xu, Sha, Chan, Yan Cheong, Zhu, Xiaoxin, Lu, Hua and Bailey, Chris (2014) Effective method to disperse and incorporate carbon nanotubes in electroless Ni-P deposits. In: 2014 IEEE 64th Electronic Components and Technology Conference (ECTC) Proceedings. Curran Associates, Stoughton, WI, USA, pp. 1342-1347. ISBN 9781479924080 (doi:10.1109/ECTC.2014.6897466)

cognitive radio

Arshad, Kamran and Moessner, Klaus (2013) Robust spectrum sensing based on statistical tests. IET Communications, 7 (9). pp. 808-817. ISSN 1751-8628 (doi:10.1049/iet-com.2012.0499)

cold crucible

Bojarevics, V., Djambazov, G., Harding, R.A., Pericleous, K. and Wickins, M. (2002) Investigation of the cold crucible melting process: experimental and numerical study. In: Proceedings of the 5th International pamir Conference. Cost P6 Annual Workshop 2002. Fundamental and Applied MHD. International pamir Conference, II.77-II.82.

cold crucible melting

Bojarevics, V. and Pericleous, K. (2001) Modelling induction melting energy savings. In: Proceedings of the International Colloquium. Modelling for Saving Resources. Riga, May 17-18, 2001. Laboratory for Mathematical Modelling of Environmental and Technological Processes, University of Latvia, Riga, Latvia, pp. 11-16. ISBN 998466189X

compartment fires

Wang, Zhaozhi, Galea, Edwin R., Jia, Fuchen, Ewer, John and Patel, Mayur (2007) Predicting HCI concentrations in fire enclosures using a HCI decay model coupled to a CFD based fire field model. Fire and Materials, 31 (7). pp. 443-461. ISSN 0308-0501 (doi:10.1002/fam.942)

complexity

Gladky, A.A., Shafransky, Y.M. and Strusevich, V.A. (2004) Flow shop scheduling problems under machine–dependent precedence constraints. Journal of Combinatorial Optimization, 8 (1). pp. 13-28. ISSN 1382-6905 (Print), 1573-2886 (Online) (doi:10.1023/B:JOCO.0000021935.66577.09)

Kelleler, H. and Strusevich, V.A. (2003) Scheduling problems for parallel dedicated machines under multiple resource constraints. Discrete Applied Mathematics, 133 (1-3). pp. 45-68. ISSN 0166-218X (doi:10.1016/S0166-218X(03)00433-5)

Kovalyov, M.Y., Potts, C.N. and Strusevich, V.A. (2003) Batching decisions for assembly production systems. European Journal of Operational Research, 157 (3). pp. 620-642. ISSN 0377-2217 (doi:10.1016/S0377-2217(03)00250-9)

composite materials

Chen, Hua-Peng (2008) Singular stresses at the tip of a crack terminating at frictional interface of fibre reinforced composites. In: Sixteenth UK Conference of the Association of Computational Mechanics in Engineering (ACME UK), 1-2 Apr 2008, Newcastle upon Tyne, UK. (Unpublished)

compuational fluid dynamics (CFD)

Stoyanov, S., Bailey, C., Saxena, N. and Adams, S. (2004) Modelling the wave soldering process. In: Proceedings of the 6th International Conference on Electronics Materials and Packaging (EMAP 2004). Institute of Electrical and Electronics Engineers, pp. 553-558. ISBN 983251486X

computational analysis software

Bailey, C., Patel, M. and Kumar, S. (2001) Computational modelling-a key component in materials processing. Transactions of the Institution of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy, 110 (1). pp. 25-32. ISSN 0371-9553 (Print), 1743-2855 (Online) (doi:10.1179/mpm.2001.110.1.25)

computational constraints

Sparrow, R. D., Adekunle, Andrew, Berry, Robert and Farnish, Richard (2015) Simulating and modelling the impact of secure communication latency for closed loop control. In: Internet Technologies and Applications (ITA), 2015. IEEE, Wrexham, UK, pp. 138-143. ISSN 9781479980369 (doi:10.1109/ITechA.2015.7317384)

computational fluid dynamics

Christakis, Nicholas, Chapelle, Pierre, Patel, Mayur K. and Cross, Mark (2006) On the continuum modelling of segregation of granular mixtures during hopper emptying in core flow mode. In: European Conference on Computational Fluid Dynamics ECCOMAS CFD 2006 Proceedings. TU Delft, The Netherlands, The Netherlands. ISBN 9090209700

Hanson, R., Allsopp, D., Deng, T., Smith, D., Bradley, M.S.A., Hutchings, I.M. and Patel, M.K. (2002) A model to predict the life of pneumatic conveyor bends. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 216 (3). pp. 143-149. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/095440802320225284)

Hanson, Robert (2001) A model to predict the lifetime of pneumatic conveyor bends. PhD thesis, University of Greenwich.

McBride, Diane, Croft, Nick and Cross, Mark (2003) Combined vertex-based - cell-centred finite volume method for flows in complex geometries. In: The 3rd International Conference on CFD in the Minerals and Process Industries [Proceedings]. CSIRO Publishing, Collingwood, Victoria, Australia, pp. 351-356. ISBN 978064309038X

Patel, M.K., Bailey, C., Djambazov, G., Shrimpton, J. and Jalili, V. (2003) Application of CFD in vacuum dezincing process. In: The 3rd International Conference on CFD in the Minerals and Process Industries [Proceedings]. CSIRO Publishing, Collingwood, Victoria, Australia, pp. 313-318. ISBN 978064309038X

Slone, A.K., Williams, A.J., Grossman, D., Croft, T.N. and Cross, M. (2003) A generic time and space accurate numerical approach to closely coupled fluid-structure interaction problems. In: NAFEMS World Congress 2003, 2003, Orlando, Florida, USA.

computational modelling

Bennett, C.R., Cross, M., Croft, T.N., Uhrie, J., Green, C. and Gebhardt, J. (2003) A comprehensive copper stockpile leach model: background and model formulation. In: Hydrometallurgy 2003. Proceedings of the Fifth International Conference. Honoring Professor Ian M. Ritchie. TMS (The Minerals, Metals & Materials Society), Pennsylvania, USA, pp. 315-328. ISBN 0873395549

Cross, M., Croft, T.N., Djambazov, G. and Pericleous, K. (2003) Computational modelling of bubbles, droplets and particles in metals reduction and refining. In: The 3rd International Conference on CFD in the Minerals and Process Industries [Proceedings]. CSIRO Publishing, Collingwood, Victoria, Australia, pp. 47-52. ISBN 978064309038X

Cross, Mark, Stoyanov, Stoyan, Mouchmov, Apostol, Lu, Hua, Croft, Nick, Slone, Avril, Williams, Alison, Bailey, Chris and Pericleous, Koulis (2003) Multi-physics-multi-scale simulation and optimisation: the next generation. In: NAFEMS World Congress, 2003, Orlando, Florida, USA.

Patel, M.K., Bailey, C., Djambazov, G., Shrimpton, J. and Jalili, V. (2003) Application of CFD in vacuum dezincing process. In: The 3rd International Conference on CFD in the Minerals and Process Industries [Proceedings]. CSIRO Publishing, Collingwood, Victoria, Australia, pp. 313-318. ISBN 978064309038X

computational solid mechanics

Taylor, Gareth Anthony (1996) A vertex based discretisation scheme applied to material non-linearity within a multi-physics finite volume framework. PhD thesis, University of Greenwich.

computational structural mechanics

Slone, A.K., Williams, A.J., Grossman, D., Croft, T.N. and Cross, M. (2003) A generic time and space accurate numerical approach to closely coupled fluid-structure interaction problems. In: NAFEMS World Congress 2003, 2003, Orlando, Florida, USA.

computer aided design (CAD)

Li, Yingguang, Liu, Changqing, Hao, Xiaozhong, Gao, James X. and Maropoulos, Paul G. (2015) Responsive fixture design using dynamic product inspection and monitoring technologies for the precision machining of large-scale aerospace parts. CIRP Annals - Manufacturing Technology, 64 (1). pp. 173-176. ISSN 0007-8506 (doi:10.1016/j.cirp.2015.04.025)

computer modelling

Bojarevics, V. and Pericleous, K. (2003) AC and DC magnetic levitation: melting, fluid flow and oscillations. In: 4th International Conference on Electromagnetic Processing of Materials, 14-17 Oct 2003, Lyon, France.

Tang, Ying Kit (2012) A risk analysis methodology for micro/nano manufacturing. PhD thesis, University of Greenwich.

computer simulation

Bailey, C., Patel, M. and Kumar, S. (2001) Computational modelling-a key component in materials processing. Transactions of the Institution of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy, 110 (1). pp. 25-32. ISSN 0371-9553 (Print), 1743-2855 (Online) (doi:10.1179/mpm.2001.110.1.25)

Lu, Hua, Bailey, C. and Cross, M. (2000) Reliability analysis of flip chip designs via computer simulation. Journal of Electronic Packaging, 122 (3). pp. 214-219. ISSN 1528-9044 (Print), 1043-7398 (Online) (doi:10.1115/1.1286122)

conductive adhesives

Yin, C.Y., Lu, H., Bailey, C. and Chan, Y.C. (2003) Experimental and modeling analysis of the reliability of the anisotropic conductive films. In: 2003 Proceedings 53rd Electronic Components & Technology Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 698-702. ISBN 0780377915 ISSN 0569-5503 (doi:10.1109/ECTC.2003.1216359)

constituitive modeling

Ridout, Stephen, Bailey, Christopher, Dusek, Milos and Hunt, C (2007) Constitutive modeling of kinematic-hardening and damage in solder joints. Proceedings of the 1st Electronics Systemintegration Technology Conference, 2006. IEEE, pp. 927-933. ISBN 1-4244-0552-1 (doi:10.1109/ESTC.2006.280122)

constitutive modelling

Javadi, A.A., Faramarzi, A. and Ahangar-Asr, A. (2009) An intelligent finite element method. In: Proceedings of the 17th UK Conference on Computational Mechanics. Spencer Institute of Theoretical and Computational Mechanics, Unversity of Nottingham, Nottingham, UK, pp. 307-310. ISBN 9780853582557

construction industry

Umeadi, Boniface B.N. (2010) An investigation into the potential of advanced sensor technology to support the maintenance of pipeline distribution systems. PhD thesis, University of Greenwich.

contact resistance

Yin, C.Y., Lu, H., Bailey, C. and Chan, Y.C. (2004) Effects of reflow process on the reliability of flip chip on flex interconnections using anisotropic conductive adhesives. In: 2004 International IEEE Conference on Asian Green Electronics (AGEC) [Proceedings]. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 240-245. ISBN 0-7803-8203-X (doi:10.1109/AGEC.2004.1290912)

Yin, C.Y., Lu, H., Bailey, C. and Chan, Y.C. (2003) Experimental and modeling analysis of the reliability of the anisotropic conductive films. In: 2003 Proceedings 53rd Electronic Components & Technology Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 698-702. ISBN 0780377915 ISSN 0569-5503 (doi:10.1109/ECTC.2003.1216359)

context-aware behaviour

Anthony, Richard, Chen, DeJiu, Pelc, Mariusz, Persson, Magnus and Tӧrngren, Martin (2009) Context-aware adaptation in DySCAS. Electronic Communications of the EASST, 19. ISSN 1863-2122

continuous casting

Croft, T.N., Pericleous, K.A., Bobadilla, M. and Gardin, P. (2002) Three-phase computations of the continuous casting process. In: Proceedings of the 4th European Continuous Casting Conference. IOM Communications Ltd, London, England, UK, pp. 545-554.

continuum mechanics

Christakis, Nicholas, Chapelle, Pierre, Patel, Mayur K., Wang, Junye, Cross, Mark, Baxter, John, Gröger, Torsten, Abou-Chakra, Hadi, Tüzün, Ugur, Bridle, Ian and Leaper, Mark C. (2002) Mathematical modelling of the behaviour of granular material in a computational fluid dynamics framework using micro-mechanical models. In: 5th World Congress on Computational Mechanics (WCCM V), 7-12 Jul 2002, Vienna, Austria.

continuum modelling

Christakis, Nicholas, Chapelle, Pierre, Patel, Mayur K. and Cross, Mark (2006) On the continuum modelling of segregation of granular mixtures during hopper emptying in core flow mode. In: European Conference on Computational Fluid Dynamics ECCOMAS CFD 2006 Proceedings. TU Delft, The Netherlands, The Netherlands. ISBN 9090209700

contour-parallel offset

Hinduja, S., Mansor, M.S.A. and Owodunni, O.O. (2010) Voronoi-diagram-based linking of contour-parallel tool paths for two-and-a-half-dimensional closed-pocket machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (9). pp. 1329-1350. ISSN 0954-4054 (Print), 2041-2975 (Online) (doi:10.1243/09544054JEM1596)

contraction flows

Aboubacar, M., Phillips, T.N., Tamaddon-Jahromi, H.R., Webster, M.K. and Williams, A.J. (2002) Numerical Simulation of Contraction Flows for Boger Fluids using Finite Volume Methods. In: Proceedings of the 6th European Conference of Rheology, (eurheo 2002). LSP, Institute of Polymer Materials, Erlangen-Nuremberg, Germany, pp. 279-280.

conveying systems

Hettiaratchi, Kaushika (2006) A comparison between the pressure gradients in vertical and horizontal pneumatic conveying, with an investigation into the effect of pipeline bore in vertical conveying. PhD thesis, University of Greenwich.

conveyor systems

Hanson, Robert (2001) A model to predict the lifetime of pneumatic conveyor bends. PhD thesis, University of Greenwich.

conveyors

Woodcock, C. R. (1978) The flow of particulate bulk solids in an air-assisted gravity conveyor. PhD thesis, Thames Polytechnic.

copper

Arokiam, A. C., Barashev, A. V., Bacon, D. J. and Osetsky, Yu. N. (2006) Characteristics of the interaction of Cu-rich precipitates with irradiation-produced defects in α-Fe. Philosophical Magazine Letters, 85 (9). pp. 491-501. ISSN 0950–0839 (Print), 1362–3036 (Online) (doi:/10.1080/09500830500300047)

Lu, Hua and Bailey, Chris (2003) Modelling the performance of lead-Free solder interconnects for copper bumped flip-chip devices. In: ASME 2003 International Electronic Packaging Technical Conference and Exhibition. American Society of Mechanical Engineers, New York, USA, pp. 605-610. ISBN 0-7918-3690-8 (doi:10.1115/IPACK2003-35356)

copper stockpile leach model

Bennett, C.R., Cross, M., Croft, T.N., Uhrie, J., Green, C. and Gebhardt, J. (2003) A comprehensive copper stockpile leach model: background and model formulation. In: Hydrometallurgy 2003. Proceedings of the Fifth International Conference. Honoring Professor Ian M. Ritchie. TMS (The Minerals, Metals & Materials Society), Pennsylvania, USA, pp. 315-328. ISBN 0873395549

core flow

Christakis, Nicholas, Chapelle, Pierre, Patel, Mayur K. and Cross, Mark (2006) On the continuum modelling of segregation of granular mixtures during hopper emptying in core flow mode. In: European Conference on Computational Fluid Dynamics ECCOMAS CFD 2006 Proceedings. TU Delft, The Netherlands, The Netherlands. ISBN 9090209700

coupled fields

Panaitescu, Ileana, Repetto, Maurizio, Leboucher, Laurent and Pericleous, Kyriacos (2000) Magneto-hydro-dynamic analysis of an electrolysis cell for aluminum production. IEEE Transactions on Magnetics, 36 (4). pp. 1305-1308. ISSN 0018-9464 (doi:10.1109/20.877679)

crack modelling

Chen, Hua-Peng (2008) Singular stresses at the tip of a crack terminating at frictional interface of fibre reinforced composites. In: Sixteenth UK Conference of the Association of Computational Mechanics in Engineering (ACME UK), 1-2 Apr 2008, Newcastle upon Tyne, UK. (Unpublished)

creep curves

Ridout, Stephen, Bailey, Christopher, Dusek, Milos and Hunt, C (2007) Constitutive modeling of kinematic-hardening and damage in solder joints. Proceedings of the 1st Electronics Systemintegration Technology Conference, 2006. IEEE, pp. 927-933. ISBN 1-4244-0552-1 (doi:10.1109/ESTC.2006.280122)

critical success factors (CSFs)

Pillai, Sreejit (2015) A decision support system for ERP projects in make -to-order manufacturing SMEs. PhD thesis, University of Greenwich.

CSM

Taylor, Gareth Anthony (1996) A vertex based discretisation scheme applied to material non-linearity within a multi-physics finite volume framework. PhD thesis, University of Greenwich.

Cu-rich

Arokiam, A. C., Barashev, A. V., Bacon, D. J. and Osetsky, Yu. N. (2006) Characteristics of the interaction of Cu-rich precipitates with irradiation-produced defects in α-Fe. Philosophical Magazine Letters, 85 (9). pp. 491-501. ISSN 0950–0839 (Print), 1362–3036 (Online) (doi:/10.1080/09500830500300047)

Cu-rich precipitates

Arokiam, A. C., Barashev, A. V., Bacon, D. J. and Osetsky, Y. N. (2007) Atomic-scale computer simulation study of the interaction of Cu-rich precipitates with irradiation-produced defects in α-Fe. Philosophical Magazine, 87 (6). pp. 925-943. ISSN 1478–6435 (Print), 1478–6443 (Online) (doi:10.1080/14786430601003908)

curing

Sinclair, Keith I., Goussetis, George, Desmulliez, Marc P.Y., Sangster, Alan J., Tilford, Tim, Bailey, Chris and Parrott, Kevin (2009) Polymer curing within an optimised open-ended microwave oven. In: European Microwave Week 2008, “Bridging Gaps”, Conference Proceedings,. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 17-20. ISBN 978-2-87487-006-4 (doi:10.1109/EUMC.2008.4751375)

cutting conditions

Owodunni, Oladele, Hinduja, Srichand, Mekid, Samir and Zia, Ahmad (2007) An investigation of optimum cutting conditions for STEP-NC turned features. In: Innovative Production Machines and Systems Conference 2007 (IPROMS), 2-13 July 2007, http://conference.iproms.org/ [Virtual Conference].

damage mechanics

Gradin, P.A., Graham, D., Nygård, P. and Vallen, H. (2007) The use of acoustic emission monitoring to rank paper materials with respect to their fracture toughness. Experimental Mechanics, 48 (1). pp. 133-137. ISSN 0014-4851 (Print), 1741-2765 (Online) (doi:10.1007/s11340-007-9055-7)

data driven prognostics

Sutharssan, T., Stoyanov, S., Bailey, C. and Rosunally, Y. (2012) Data analysis techniques for real-time prognostics and health management of semiconductor devices. In: Microelectronics and Packaging. Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ, USA, pp. 1-7. ISBN 978-1-4673-0694-2 (print)

Sutharssan, Thamo, Stoyanov, Stoyan, Bailey, Christopher and Rosunally, Yasmine (2012) Prognostics and health monitoring of high power LED. Micromachines, 3 (1). pp. 78-100. ISSN 2072-666X (doi:10.3390/mi3010078)

data mining

Javadi, A.A., Faramarzi, A. and Ahangar-Asr, A. (2009) An intelligent finite element method. In: Proceedings of the 17th UK Conference on Computational Mechanics. Spencer Institute of Theoretical and Computational Mechanics, Unversity of Nottingham, Nottingham, UK, pp. 307-310. ISBN 9780853582557

DC

Bojarevics, V. and Pericleous, K. (2003) AC and DC magnetic levitation: melting, fluid flow and oscillations. In: 4th International Conference on Electromagnetic Processing of Materials, 14-17 Oct 2003, Lyon, France.

DCE

Chen, Li Choo (2007) Optimisation of rule-based testing for scheduling within a distributed computing environment. PhD thesis, University of Greenwich.

decision support system

Pillai, Sreejit (2015) A decision support system for ERP projects in make -to-order manufacturing SMEs. PhD thesis, University of Greenwich.

degradation tester

Chapelle, Pierre, Abou-Chakra, Hadi, Christakis, Nicholas, Patel, Mayur, Abu-Nahar, Azlina, Tüzün, Ugur and Cross, Mark (2004) Computational model for prediction of particle degradation during dilute phase pneumatic conveying: the use of a laboratory scale degradation tester for the determination of degradation propensity. Advanced Powder Technology, 15 (1). pp. 13-29. ISSN 0921-8831 (doi:10.1163/15685520460740043)

degradation toolkit

Abou-Chakra, Hadi, Baxter, John, Tuzun, Ugur, Chapelle, Pierre, Patel, Mayur, Bridle, Ian, Bradley, Michael S.A. and Reed, Alan R. (2004) Degradation toolkit for predicting the amount of degradation of particulate solids in lean phase pneumatic conveyors. In: International Conference for Particle Technology (PARTEC 2004), 16-18 March 2004, Nuremberg, Germany. (Unpublished)

dendritic growth

Kao, A. and Pericleous, K. (2012) The effect of secondary arm growth on thermoelectric magnetohydrodynamics. Magnetohydrodynamics, 48 (2). pp. 361-370. ISSN 0024-998X

Kao, A. and Pericleous, K. (2012) A multi scale method for thermo-electric MHD in dendritic solidification. Journal of Iron and Steel International, 19 (S1-1). pp. 317-321. ISSN 1006-706X

deposition

Wang, Zhaozhi, Galea, Edwin R., Jia, Fuchen, Ewer, John and Patel, Mayur (2007) Predicting HCI concentrations in fire enclosures using a HCI decay model coupled to a CFD based fire field model. Fire and Materials, 31 (7). pp. 443-461. ISSN 0308-0501 (doi:10.1002/fam.942)

design

Bailey, C., Patel, M. and Kumar, S. (2001) Computational modelling-a key component in materials processing. Transactions of the Institution of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy, 110 (1). pp. 25-32. ISSN 0371-9553 (Print), 1743-2855 (Online) (doi:10.1179/mpm.2001.110.1.25)

Lu, Hua, Bailey, C. and Cross, M. (2000) Reliability analysis of flip chip designs via computer simulation. Journal of Electronic Packaging, 122 (3). pp. 214-219. ISSN 1528-9044 (Print), 1043-7398 (Online) (doi:10.1115/1.1286122)

design and manufacture

Woon, Fei Ling, Knight, Brian, Petridis, Miltos and Ward, Graham (2002) A case based model to assist in the design process in the manufacture of furniture products. Expert Update - The Specialist Group on Artificial intelligence, 5 (2). pp. 37-43. ISSN 1465-4091

design engineers

Bailey, Chris, Lu, Hua and Yin, Chunyan (2010) Modelling reliability of power electronics packaging. In: Proceedings of the ASME InterPack Conference 2009, IPACK2009. American Society of Mechanical Engineers, New York, USA, pp. 215-220. ISBN 9780791843604 (doi:10.1115/InterPACK2009-89430)

design knowledge reuse

Baxter, David, Rajkumar, Roy and Gao, James (2008) Design process knowledge reuse challenges and issues. Computer Aided Design and Applications, 5 (6). pp. 942-952. ISSN 1686-4360 (doi:10.3722/cadaps.2008.942-952)

design of experiments

Gwyer, D., Misselbrook, P., Bailey, C., Conway, P.P. and Williams, K. (2004) Polymer waveguide and VCSEL array multi-physics modelling for OECB based optical backplanes [opto-electrical circuit boards]. In: Proceedings of the 5th International Conference on Thermal and Mechanical Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2004. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 399-406. ISBN 0780384202 (doi:10.1109/ESIME.2004.1304070)

design process support

Baxter, David, Rajkumar, Roy and Gao, James (2008) Design process knowledge reuse challenges and issues. Computer Aided Design and Applications, 5 (6). pp. 942-952. ISSN 1686-4360 (doi:10.3722/cadaps.2008.942-952)

dielectric losses

Sinclair, Keith I., Goussetis, George, Desmulliez, Marc P.Y., Sangster, Alan J., Tilford, Tim, Bailey, Chris and Parrott, Kevin (2009) Polymer curing within an optimised open-ended microwave oven. In: European Microwave Week 2008, “Bridging Gaps”, Conference Proceedings,. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 17-20. ISBN 978-2-87487-006-4 (doi:10.1109/EUMC.2008.4751375)

dielectric materials

Sinclair, Keith I., Goussetis, George, Desmulliez, Marc P.Y., Sangster, Alan J., Tilford, Tim, Bailey, Chris and Parrott, Kevin (2009) Polymer curing within an optimised open-ended microwave oven. In: European Microwave Week 2008, “Bridging Gaps”, Conference Proceedings,. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 17-20. ISBN 978-2-87487-006-4 (doi:10.1109/EUMC.2008.4751375)

dilute phase pneumatic conveying

Chapelle, Pierre, Abou-Chakra, Hadi, Christakis, Nicholas, Patel, Mayur, Abu-Nahar, Azlina, Tüzün, Ugur and Cross, Mark (2004) Computational model for prediction of particle degradation during dilute phase pneumatic conveying: the use of a laboratory scale degradation tester for the determination of degradation propensity. Advanced Powder Technology, 15 (1). pp. 13-29. ISSN 0921-8831 (doi:10.1163/15685520460740043)

direct chill

Williams, A.J., Croft, T.N. and Cross, M. (2003) Modeling of ingot development during the start-up phase of direct chill casting. Metallurgical and Materials Transactions B, 34 (5). pp. 727-734. ISSN 1073-5615 (Print), 1543-1916 (Online) (doi:10.1007/s11663-003-0042-9)

direct chill casting process

Cross, M., Williams, A., Bailey, C., Taylor, G.A., Pericleous, K. and Croft, T.N. (2000) Towards a comprehensive model of the direct chill casting process. In: Modeling of Casting, Welding and Advanced Solidification Processes IX [Proceedings]. Shaker, Aachen, Germany, pp. 713-720. ISBN 3826572300

direct search method

Owodunni, O.O., Zhang, T. and Gao, J. (2013) Energy consideration in machining operations - towards explanatory models for optimisation results. In: 11th Global Conference on Sustainable Manufacturing : Proceedings. Innovative Solutions. Universitätsverlag der TU Berlin, Berlin, Germany, pp. 153-158. ISBN 978-3-7983-2609-5

discrete event simulation

Pillai, Sreejit (2015) A decision support system for ERP projects in make -to-order manufacturing SMEs. PhD thesis, University of Greenwich.

dispersion

Xu, Sha, Chan, Yan Cheong, Zhu, Xiaoxin, Lu, Hua and Bailey, Chris (2014) Effective method to disperse and incorporate carbon nanotubes in electroless Ni-P deposits. In: 2014 IEEE 64th Electronic Components and Technology Conference (ECTC) Proceedings. Curran Associates, Stoughton, WI, USA, pp. 1342-1347. ISBN 9781479924080 (doi:10.1109/ECTC.2014.6897466)

Distributed Computing Environment

Chen, Li Choo (2007) Optimisation of rule-based testing for scheduling within a distributed computing environment. PhD thesis, University of Greenwich.

distributed generation

Skarvelis-Kazakos, Spyros, Rikos, Evangelos, Kolentini, Efstathia, Cipcigan, Liana M. and Jenkins, Nick (2013) Implementing agent-based emissions trading for controlling Virtual Power Plant emissions. Electric Power Systems Research, 102. ISSN 0378-7796 (doi:10.1016/j.epsr.2013.04.004)

distribution systems

Umeadi, Boniface B.N. (2010) An investigation into the potential of advanced sensor technology to support the maintenance of pipeline distribution systems. PhD thesis, University of Greenwich.

dynamic configuration

Anthony, Richard, Chen, DeJiu, Pelc, Mariusz, Persson, Magnus and Tӧrngren, Martin (2009) Context-aware adaptation in DySCAS. Electronic Communications of the EASST, 19. ISSN 1863-2122

dynamic fluid-structure interaction

Slone, A.K., Pericleous, K., Bailey, C. and Cross, M. (2001) Details of an integrated approach to three-dimensional dynamic fluid structure interaction. In: Fluid Structure Interaction. WIT Press, Southampton, UK, pp. 57-66. ISBN 1853128813 ISSN 1353-808x

dynamics perturbation theory

Chen, Hua-Peng (2008) Mode shape expansion using perturbed force vector approach. In: Sixteenth UK Conference of the Association of Computational Mechanics in Engineering (ACME UK), 1-2 Apr 2008, Newcastle upon Tyne, UK. (Unpublished)

elasto-visco plasticity

Taylor, Gareth Anthony (1996) A vertex based discretisation scheme applied to material non-linearity within a multi-physics finite volume framework. PhD thesis, University of Greenwich.

electrical engineering

Li, Ji (2007) A study of the solid particle erosion performance of automative and other novel low carbon steels. PhD thesis, University of Greenwich.

Sagor, Md. Hasanuzzaman (2014) Differentially fed active antennas. PhD thesis, University of Greenwich.

electrical power

Bailey, Chris, Lu, Hua and Yin, Chunyan (2010) Modelling reliability of power electronics packaging. In: Proceedings of the ASME InterPack Conference 2009, IPACK2009. American Society of Mechanical Engineers, New York, USA, pp. 215-220. ISBN 9780791843604 (doi:10.1115/InterPACK2009-89430)

electrohydrodynamic

Chen, H., Yu, W., Cargill, S., Patel, M.K., Bailey, C., Tonry, C. and Desmulliez, M.P.Y. (2012) Self-encapsulated hollow microstructures formed by electric field-assisted capillarity. Microfluidics and Nanofluidics, 13 (1). pp. 75-82. ISSN 1613-4982 (Print), 1613-4990 (Online) (doi:10.1007/s10404-012-0942-6)

electrolyte flow

Bojarevics, Valdis and Roy, Alan (2011) Effect of magnetic forces on bubble transport in aluminium electrolysis cells. In: Proceedings of the 8th PAMIR International Conference on Fundamental and Applied MHD. Laboratoire CNRS-EPM/SIMaP / Institute of Physics, University of Latvia, Corsica, France, pp. 453-457.

electromagnetic fields

Panaitescu, Ileana, Repetto, Maurizio, Leboucher, Laurent and Pericleous, Kyriacos (2000) Magneto-hydro-dynamic analysis of an electrolysis cell for aluminum production. IEEE Transactions on Magnetics, 36 (4). pp. 1305-1308. ISSN 0018-9464 (doi:10.1109/20.877679)

electromagnetic field

Hughes, Michael, Pericleous, Koulis and Strusevitch, Nadia (2002) Modelling the fluid dynamics and coupled phenomena in arc weld pools. In: Mathematical Modelling of Weld Phenomena. Materials Modelling, 6 . Maney Publishing for the Institute of Materials, Minerals and Mining, London, England, UK, pp. 63-81. ISBN 9781902653563

electromagnetic force

Bojarevics, V. and Pericleous, K. (2001) Dynamics of magnetically suspended fluid. In: 6th International Symposium on Magnetic Suspension Technology [Proceedings]. ISMST, pp. 287-292.

electromagnetic heating

Sinclair, Keith I., Goussetis, George, Desmulliez, Marc P.Y., Sangster, Alan J., Tilford, Tim, Bailey, Chris and Parrott, Kevin (2009) Polymer curing within an optimised open-ended microwave oven. In: European Microwave Week 2008, “Bridging Gaps”, Conference Proceedings,. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 17-20. ISBN 978-2-87487-006-4 (doi:10.1109/EUMC.2008.4751375)

electromagnetic material processing

Bojarevics, Valdis and Pericleous, Koulis (2003) Modelling electromagnetically levitated liquid droplet oscillations. ISIJ International, 43 (6). pp. 890-898. ISSN 0915-1559 (Print), 1347-5460 (Online) (doi:10.2355/isijinternational.43.890)

electromagnetic processing

Bojarevics, V. and Pericleous, K. (2001) Modelling induction melting energy savings. In: Proceedings of the International Colloquium. Modelling for Saving Resources. Riga, May 17-18, 2001. Laboratory for Mathematical Modelling of Environmental and Technological Processes, University of Latvia, Riga, Latvia, pp. 11-16. ISBN 998466189X

electronic materials

Kumar, Santosh, Mallik, Sabuj, Ekere, Ndy and Jung, Jaepil (2013) Stencil Printing Behavior of Lead-Free Sn-3Ag-0.5Cu Solder Paste for Wafer Level Bumping for Sub-100 μm Size Solder Bumps. Metals and Materials International, 19 (5). pp. 1083-1090. ISSN 1598-9623 (Print), 2005-4149 (Online) (doi:10.1007/s12540-013-5025-z)

electronics

Mileman, Tony, Knight, Brian, Petridis, Miltos, Preddy, Keith and Mejasson, Patrick (2000) Maintenance of a case-base for the retrieval of rotationally symmetric shapes for the design of metal castings. In: Blanzieri, Enrico and Portinale, Luigi, (eds.) Advances in Case-Based Reasoning: 5th European Workshop, EWCBR 2000 Trento, Italy, September 6–9, 2000 Proceedings. Lecture Notes in Computer Science: Lecture Notes in Artificial Intelligence (1898). Springer Berlin Heidelberg, Berlin, Heidelberg, Germany, pp. 418-430. ISBN 9783540679332 ISSN 0302-9743 (doi:10.1007/3-540-44527-7_36)

emissions markets

Skarvelis-Kazakos, Spyros, Rikos, Evangelos, Kolentini, Efstathia, Cipcigan, Liana M. and Jenkins, Nick (2013) Implementing agent-based emissions trading for controlling Virtual Power Plant emissions. Electric Power Systems Research, 102. ISSN 0378-7796 (doi:10.1016/j.epsr.2013.04.004)

energy efficiency

Zhang, Taoyuan (2015) Sustainability consideration in machining of 2½d milled features. PhD thesis, University of Greenwich.

energy minimisation

Owodunni, O.O., Zhang, T. and Gao, J. (2013) Energy consideration in machining operations - towards explanatory models for optimisation results. In: 11th Global Conference on Sustainable Manufacturing : Proceedings. Innovative Solutions. Universitätsverlag der TU Berlin, Berlin, Germany, pp. 153-158. ISBN 978-3-7983-2609-5

engineering

van Manen, P. (1984) The dynamic behaviour of rail vehicles operating at high speeds for manriding in British coal mines. PhD thesis, Thames Polytechnic.

engineering design

Fei, Genyuan, Gao, James, Owodunni, Oladele and Tang, X. Q. (2009) A methodology for engineering design change management using modelling and problem solving techniques. In: Hinduja, Srichand and Li, Lin, (eds.) Proceedings of the 36th International MATADOR Conference. Springer, US, pp. 179-182. ISBN 978-1-84996-432-6_41 (doi:10.1007/978-1-84996-432-6_41)

Enterprise resource planning

Pillai, Sreejit (2015) A decision support system for ERP projects in make -to-order manufacturing SMEs. PhD thesis, University of Greenwich.

equipment testing

Burnett, A. J. (1993) Wear in pneumatic conveying pipelines. Powder Handling and Processing, 15 (2). pp. 123-128. ISSN 0934-7348

erosion

Hanson, R., Allsopp, D., Deng, T., Smith, D., Bradley, M.S.A., Hutchings, I.M. and Patel, M.K. (2002) A model to predict the life of pneumatic conveyor bends. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 216 (3). pp. 143-149. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/095440802320225284)

Eulerian

Slone, Avril, Fallah, Nosrat, Bailey, Christopher and Cross, Mark (2002) A finite volume approach to geometrically non-linear stress analysis. In: Finite volumes for complex applications III: problems and perspectives. Hermes Penton Science, London, UK, pp. 663-670. ISBN 9781903996348

Williams, A.J., Croft, T.N. and Cross, M. (2002) Computational modelling of metals forming processes. In: The 5th International EASFORM Conference on Material Forming [Proceedings]. Akapit Publishing, Kraków, Poland, pp. 67-70. ISBN 8371080980

event history analysis

Lu, Hua, Bailey, C. and Cross, M. (2000) Reliability analysis of flip chip designs via computer simulation. Journal of Electronic Packaging, 122 (3). pp. 214-219. ISSN 1528-9044 (Print), 1043-7398 (Online) (doi:10.1115/1.1286122)

evolutionary algorithm

Javadi, Akbar, Faramarzi, Asaad, Farmani, Raziyeh and Evans, Ken (2009) Design of microstructure and topological optimisation of auxetic materials. In: Proceedings of the 17th UK Conference on Computational Mechanics. Spencer Institute of Theoretical and Computational Mechanics, Unversity of Nottingham, Nottingham, UK, pp. 251-260. ISBN 9780853582557

evolutionary computation

Javadi, A.A., Faramarzi, A. and Ahangar-Asr, A. (2009) An intelligent finite element method. In: Proceedings of the 17th UK Conference on Computational Mechanics. Spencer Institute of Theoretical and Computational Mechanics, Unversity of Nottingham, Nottingham, UK, pp. 307-310. ISBN 9780853582557

extrusion

Williams, A.J., Croft, T.N. and Cross, M. (2002) Computational modelling of metals forming processes. In: The 5th International EASFORM Conference on Material Forming [Proceedings]. Akapit Publishing, Kraków, Poland, pp. 67-70. ISBN 8371080980

fatigue

Lu, Hua, Bailey, C. and Cross, M. (2000) Reliability analysis of flip chip designs via computer simulation. Journal of Electronic Packaging, 122 (3). pp. 214-219. ISSN 1528-9044 (Print), 1043-7398 (Online) (doi:10.1115/1.1286122)

feature-based model

Owodunni, Oladele, Hinduja, Srichand, Mekid, Samir and Zia, Ahmad (2007) An investigation of optimum cutting conditions for STEP-NC turned features. In: Innovative Production Machines and Systems Conference 2007 (IPROMS), 2-13 July 2007, http://conference.iproms.org/ [Virtual Conference].

filters

Kessel, Stephen Ronald (1985) The interaction between rotary valves and pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

Wang, Yi, Ke, Maolong and Lancaster, Michael J. (2009) Micromachined 60 GHz air-filled interdigital bandpass filter. In: International Workshop on Microwave Filters, 16-18 November 2009, Toulouse, France.

finite element

Slone, A.K., Williams, A.J., Grossman, D., Croft, T.N. and Cross, M. (2003) A generic time and space accurate numerical approach to closely coupled fluid-structure interaction problems. In: NAFEMS World Congress 2003, 2003, Orlando, Florida, USA.

Yin, C.Y., Lu, H., Bailey, C. and Chan, Y.C. (2004) Effects of reflow process on the reliability of flip chip on flex interconnections using anisotropic conductive adhesives. In: 2004 International IEEE Conference on Asian Green Electronics (AGEC) [Proceedings]. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 240-245. ISBN 0-7803-8203-X (doi:10.1109/AGEC.2004.1290912)

finite element analysis

Gwyer, D., Misselbrook, P., Bailey, C., Conway, P.P. and Williams, K. (2004) Polymer waveguide and VCSEL array multi-physics modelling for OECB based optical backplanes [opto-electrical circuit boards]. In: Proceedings of the 5th International Conference on Thermal and Mechanical Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2004. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 399-406. ISBN 0780384202 (doi:10.1109/ESIME.2004.1304070)

Stoyanov, S. and Bailey, C. (2003) Optimization and finite element analysis for reliable electronic packaging. In: Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-electronics and Micro-systems. Proceedings of EuroSimE 2003. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 391-399. ISBN 0780370546

Yin, Chunyan, Lu, Hua, Bailey, Chris and Chan, Yan-Cheong (2004) Effects of solder reflow on the reliability of flip-chip on flex interconnections using anisotropic conductive adhesives. IEEE Transactions on Electronics Packaging Manufacturing, 27 (4). pp. 254-259. ISSN 1521-334X (doi:10.1109/TEPM.2004.843152)

finite element method

Javadi, Akbar, Faramarzi, Asaad, Farmani, Raziyeh and Evans, Ken (2009) Design of microstructure and topological optimisation of auxetic materials. In: Proceedings of the 17th UK Conference on Computational Mechanics. Spencer Institute of Theoretical and Computational Mechanics, Unversity of Nottingham, Nottingham, UK, pp. 251-260. ISBN 9780853582557

finite elements

Javadi, A.A., Faramarzi, A. and Ahangar-Asr, A. (2009) An intelligent finite element method. In: Proceedings of the 17th UK Conference on Computational Mechanics. Spencer Institute of Theoretical and Computational Mechanics, Unversity of Nottingham, Nottingham, UK, pp. 307-310. ISBN 9780853582557

Finite Volume

Croft, T.N., Pericleous, K.A., Bobadilla, M. and Gardin, P. (2002) Three-phase computations of the continuous casting process. In: Proceedings of the 4th European Continuous Casting Conference. IOM Communications Ltd, London, England, UK, pp. 545-554.

Fallah, N.A., Bailey, C. and Cross, M. (2000) CFD approach for solid mechanics analysis. In: European Congress on Computational Methods in Applied Sciences and Engineering. ECCOMAS 2000. [Proceedings]. ECCOMAS.

Slone, A.K., Cross, M., Pericleous, K.A. and Bailey, C. (2001) A finite volume unstructured mesh approach to dynamic fluid-structure interaction: an assessment of the challenge of flutter analysis. In: Trends in Computational Structural Mechanics. International Center for Numerical Methods in Engineering (CIMNE), Barcelona, Spain, pp. 741-750. ISBN 8489925771

Slone, A.K., Pericleous, K., Bailey, C. and Cross, M. (2001) Dynamic fluid-structure interaction using finite volume unstructured mesh procedures. In: European Conference on Computational Fluid Dynamics ECCOMAS CFD 2006 Proceedings. ECCOMAS. ISBN 0905091124

Slone, Avril, Fallah, Nosrat, Bailey, Christopher and Cross, Mark (2002) A finite volume approach to geometrically non-linear stress analysis. In: Finite volumes for complex applications III: problems and perspectives. Hermes Penton Science, London, UK, pp. 663-670. ISBN 9781903996348

Williams, A.J., Croft, T.N. and Cross, M. (2002) Computational modelling of metals forming processes. In: The 5th International EASFORM Conference on Material Forming [Proceedings]. Akapit Publishing, Kraków, Poland, pp. 67-70. ISBN 8371080980

finite volume (FV)

Slone, A.K., Williams, A.J., Grossman, D., Croft, T.N. and Cross, M. (2003) A generic time and space accurate numerical approach to closely coupled fluid-structure interaction problems. In: NAFEMS World Congress 2003, 2003, Orlando, Florida, USA.

finite volume method

Phillips, T.N. and Williams, A.J. (2000) Semi-Lagrangian finite volume methods for viscoelastic flow problems. In: The Mathematics of Finite Elements and Applications X (MAFELAP 19). Elsevier Science Ltd., Kidlington, Oxford, pp. 335-344. ISBN 0080435688

finite volume methods

Aboubacar, M., Phillips, T.N., Tamaddon-Jahromi, H.R., Webster, M.K. and Williams, A.J. (2002) Numerical Simulation of Contraction Flows for Boger Fluids using Finite Volume Methods. In: Proceedings of the 6th European Conference of Rheology, (eurheo 2002). LSP, Institute of Polymer Materials, Erlangen-Nuremberg, Germany, pp. 279-280.

Phillips, T.N. and Williams, A.J. (2002) Comparison of creeping and inertial flow of an Oldroyd B fluid through planar and axisymmetric contractions. Journal of Non-Newtonian Fluid Mechanics, 108 (1-3). pp. 25-47. ISSN 0377-0257 (doi:10.1016/S0377-0257(02)00123-4)

finite volume unstructured mesh

Slone, A.K., Pericleous, K., Bailey, C. and Cross, M. (2001) Details of an integrated approach to three-dimensional dynamic fluid structure interaction. In: Fluid Structure Interaction. WIT Press, Southampton, UK, pp. 57-66. ISBN 1853128813 ISSN 1353-808x

fire modelling

Ewer, J.A.C., Galea, E.R., Patel, M.K. and Knight, B. (2000) The development of group solvers in the SMARTFIRE fire field model. In: ACME '2000 The 8th Annual Conference of the Association for Computational Mechanics in Engineering. Extended Abstracts. University of Greenwich, Greenwich, London, UK, pp. 54-57. ISBN 1861661509

fire simulation

Wang, Zhaozhi, Galea, Edwin R., Jia, Fuchen, Ewer, John and Patel, Mayur (2007) Predicting HCI concentrations in fire enclosures using a HCI decay model coupled to a CFD based fire field model. Fire and Materials, 31 (7). pp. 443-461. ISSN 0308-0501 (doi:10.1002/fam.942)

fire simulation software

Ewer, J.A.C., Galea, E.R., Patel, M.K. and Knight, B. (2000) The development of group solvers in the SMARTFIRE fire field model. In: ACME '2000 The 8th Annual Conference of the Association for Computational Mechanics in Engineering. Extended Abstracts. University of Greenwich, Greenwich, London, UK, pp. 54-57. ISBN 1861661509

fires

van Manen, P. (1984) The dynamic behaviour of rail vehicles operating at high speeds for manriding in British coal mines. PhD thesis, Thames Polytechnic.

flip chip

Yin, C.Y., Lu, H., Bailey, C. and Chan, Y.C. (2003) Experimental and modeling analysis of the reliability of the anisotropic conductive films. In: 2003 Proceedings 53rd Electronic Components & Technology Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 698-702. ISBN 0780377915 ISSN 0569-5503 (doi:10.1109/ECTC.2003.1216359)

flip-chip

Lu, Hua, Bailey, C. and Cross, M. (2000) Reliability analysis of flip chip designs via computer simulation. Journal of Electronic Packaging, 122 (3). pp. 214-219. ISSN 1528-9044 (Print), 1043-7398 (Online) (doi:10.1115/1.1286122)

flip-chip assembly

Lu, H., Stoyanov, S., Bailey, C., Hung, K.C. and Chan, Y.C. (2001) A modelling and experimental analysis of the no-flow underfill process for flip-chip assembly. In: Proceedings of the 4th International Symposium on Electronic Packaging Technology. Institute of Electrical and Electronics Engineers, Inc., pp. 338-343. ISBN 0780398114

flip-chip devices

Gwyer, D., Misselbrook, P., Philpott, D., Bailey, C., Conway, P.P. and Williams, K. (2004) Thermal, mechanical and optical modelling of VCSEL packaging. In: The Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena In Electronic Systems (ITHERM 2004) [Proceedings]. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 405-410. ISBN 0780383575 ISSN 1089-9870 (doi:10.1109/ITHERM.2004.1318311)

Lu, Hua and Bailey, Chris (2003) Modelling the performance of lead-Free solder interconnects for copper bumped flip-chip devices. In: ASME 2003 International Electronic Packaging Technical Conference and Exhibition. American Society of Mechanical Engineers, New York, USA, pp. 605-610. ISBN 0-7918-3690-8 (doi:10.1115/IPACK2003-35356)

Yin, C.Y., Lu, H., Bailey, C. and Chan, Y.C. (2004) Effects of reflow process on the reliability of flip chip on flex interconnections using anisotropic conductive adhesives. In: 2004 International IEEE Conference on Asian Green Electronics (AGEC) [Proceedings]. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 240-245. ISBN 0-7803-8203-X (doi:10.1109/AGEC.2004.1290912)

Yin, Chunyan, Lu, Hua, Bailey, Chris and Chan, Yan-Cheong (2004) Effects of solder reflow on the reliability of flip-chip on flex interconnections using anisotropic conductive adhesives. IEEE Transactions on Electronics Packaging Manufacturing, 27 (4). pp. 254-259. ISSN 1521-334X (doi:10.1109/TEPM.2004.843152)

flow behaviour

Hughes, Michael, Pericleous, Koulis and Strusevitch, Nadia (2002) Modelling the fluid dynamics and coupled phenomena in arc weld pools. In: Mathematical Modelling of Weld Phenomena. Materials Modelling, 6 . Maney Publishing for the Institute of Materials, Minerals and Mining, London, England, UK, pp. 63-81. ISBN 9781902653563

flow motion

Bojarevics, V. and Pericleous, K. (2001) Dynamics of magnetically suspended fluid. In: 6th International Symposium on Magnetic Suspension Technology [Proceedings]. ISMST, pp. 287-292.

flow property measurement

Khan, Naushad Salim (2008) Handling characteristics of coal/biomass mixes: measurements and establishing benchmarks. PhD thesis, University of Greenwich.

flow rate

Woodcock, C. R. (1978) The flow of particulate bulk solids in an air-assisted gravity conveyor. PhD thesis, Thames Polytechnic.

flow shop

Gladky, A.A., Shafransky, Y.M. and Strusevich, V.A. (2004) Flow shop scheduling problems under machine–dependent precedence constraints. Journal of Combinatorial Optimization, 8 (1). pp. 13-28. ISSN 1382-6905 (Print), 1573-2886 (Online) (doi:10.1023/B:JOCO.0000021935.66577.09)

Kovalyov, M.Y., Potts, C.N. and Strusevich, V.A. (2003) Batching decisions for assembly production systems. European Journal of Operational Research, 157 (3). pp. 620-642. ISSN 0377-2217 (doi:10.1016/S0377-2217(03)00250-9)

Potts, C.N., Strusevich, V.A. and Tautenhahn, T. (2001) Scheduling batches with simultaneous job processing for two-machine shop problems. Journal of Scheduling, 4 (1). pp. 25-51. ISSN 1094-6136 (Print), 1099-1425 (Online) (doi:10.1002/1099-1425(200101/02)4:1<25::AID-JOS58>3.0.CO;2-7)

flow shop scheduling

Kubzin, Mikhail A. and Strusevich, Vitaly A. (2004) Two-machine flowshop scheduling problems with no-wait jobs. Naval Research Logistics, 51 (4). pp. 613-631. ISSN 0894-069X (Print), 1520-6750 (Online) (doi:10.1002/nav.10118)

flow visualisation

Pittman, Andrew Nigel (1990) Suction nozzle feeding mechanisms and their effect on the performance of vacuum pneumatic conveying systems. MPhil thesis, Thames Polytechnic.

Fluid dynamics

Hughes, Michael, Taylor, Gareth A. and Pericleous, Koulis (2000) Thermocapillary and magnetohydrodynamic effects in modelling the thermodynamics of stationary welding processes. Phoenics Journal of Computational Fluid Dynamics and Its Applications, 13 (1). pp. 99-113. ISSN 0969-8248

fluid flow

Williams, A.J., Croft, T.N. and Cross, M. (2003) Modeling of ingot development during the start-up phase of direct chill casting. Metallurgical and Materials Transactions B, 34 (5). pp. 727-734. ISSN 1073-5615 (Print), 1543-1916 (Online) (doi:10.1007/s11663-003-0042-9)

fluid mechanics

Chow, Peter M-Y (1993) Control volume unstructured mesh procedure for convection-diffusion solidification processes. PhD thesis, University of Greenwich.

Jones, Mark G. (1988) The influence of bulk particulate properties on pneumatic conveying performance. PhD thesis, Thames Polytechnic.

Kessel, Stephen Ronald (1985) The interaction between rotary valves and pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

fluid structure

Slone, A.K., Williams, A.J., Grossman, D., Croft, T.N. and Cross, M. (2003) A generic time and space accurate numerical approach to closely coupled fluid-structure interaction problems. In: NAFEMS World Congress 2003, 2003, Orlando, Florida, USA.

fluid structure interaction

Slone, A.K., Cross, M., Pericleous, K.A. and Bailey, C. (2001) A finite volume unstructured mesh approach to dynamic fluid-structure interaction: an assessment of the challenge of flutter analysis. In: Trends in Computational Structural Mechanics. International Center for Numerical Methods in Engineering (CIMNE), Barcelona, Spain, pp. 741-750. ISBN 8489925771

Slone, A.K., Pericleous, K., Bailey, C. and Cross, M. (2001) Dynamic fluid-structure interaction using finite volume unstructured mesh procedures. In: European Conference on Computational Fluid Dynamics ECCOMAS CFD 2006 Proceedings. ECCOMAS. ISBN 0905091124

fluid velocity

Kao, A. and Pericleous, K. (2012) The effect of secondary arm growth on thermoelectric magnetohydrodynamics. Magnetohydrodynamics, 48 (2). pp. 361-370. ISSN 0024-998X

fracture toughness

Gradin, P.A., Graham, D., Nygård, P. and Vallen, H. (2007) The use of acoustic emission monitoring to rank paper materials with respect to their fracture toughness. Experimental Mechanics, 48 (1). pp. 133-137. ISSN 0014-4851 (Print), 1741-2765 (Online) (doi:10.1007/s11340-007-9055-7)

Framework for machining optimisation

Zhang, Taoyuan (2015) Sustainability consideration in machining of 2½d milled features. PhD thesis, University of Greenwich.

free surface

Williams, A.J., Croft, T.N. and Cross, M. (2002) Computational modelling of metals forming processes. In: The 5th International EASFORM Conference on Material Forming [Proceedings]. Akapit Publishing, Kraków, Poland, pp. 67-70. ISBN 8371080980

free surface dynamics

Bojarevics, Valdis and Pericleous, Koulis (2003) Modelling electromagnetically levitated liquid droplet oscillations. ISIJ International, 43 (6). pp. 890-898. ISSN 0915-1559 (Print), 1347-5460 (Online) (doi:10.2355/isijinternational.43.890)

frictional interface

Chen, Hua-Peng (2008) Singular stresses at the tip of a crack terminating at frictional interface of fibre reinforced composites. In: Sixteenth UK Conference of the Association of Computational Mechanics in Engineering (ACME UK), 1-2 Apr 2008, Newcastle upon Tyne, UK. (Unpublished)

gas bubbles

Bojarevics, Valdis and Roy, Alan (2011) Effect of magnetic forces on bubble transport in aluminium electrolysis cells. In: Proceedings of the 8th PAMIR International Conference on Fundamental and Applied MHD. Laboratoire CNRS-EPM/SIMaP / Institute of Physics, University of Latvia, Corsica, France, pp. 453-457.

gas flow

Stoyanov, S., Bailey, C., Saxena, N. and Adams, S. (2004) Modelling the wave soldering process. In: Proceedings of the 6th International Conference on Electronics Materials and Packaging (EMAP 2004). Institute of Electrical and Electronics Engineers, pp. 553-558. ISBN 983251486X

geometric conservation law

Slone, A.K., Cross, M., Pericleous, K.A. and Bailey, C. (2001) A finite volume unstructured mesh approach to dynamic fluid-structure interaction: an assessment of the challenge of flutter analysis. In: Trends in Computational Structural Mechanics. International Center for Numerical Methods in Engineering (CIMNE), Barcelona, Spain, pp. 741-750. ISBN 8489925771

Slone, A.K., Pericleous, K., Bailey, C. and Cross, M. (2001) Dynamic fluid-structure interaction using finite volume unstructured mesh procedures. In: European Conference on Computational Fluid Dynamics ECCOMAS CFD 2006 Proceedings. ECCOMAS. ISBN 0905091124

geometry

Lu, Hua, Bailey, C. and Cross, M. (2000) Reliability analysis of flip chip designs via computer simulation. Journal of Electronic Packaging, 122 (3). pp. 214-219. ISSN 1528-9044 (Print), 1043-7398 (Online) (doi:10.1115/1.1286122)

granular material

Christakis, Nicholas, Chapelle, Pierre, Patel, Mayur K. and Cross, Mark (2006) On the continuum modelling of segregation of granular mixtures during hopper emptying in core flow mode. In: European Conference on Computational Fluid Dynamics ECCOMAS CFD 2006 Proceedings. TU Delft, The Netherlands, The Netherlands. ISBN 9090209700

Christakis, Nicholas, Chapelle, Pierre, Patel, Mayur K., Wang, Junye, Cross, Mark, Baxter, John, Gröger, Torsten, Abou-Chakra, Hadi, Tüzün, Ugur, Bridle, Ian and Leaper, Mark C. (2002) Mathematical modelling of the behaviour of granular material in a computational fluid dynamics framework using micro-mechanical models. In: 5th World Congress on Computational Mechanics (WCCM V), 7-12 Jul 2002, Vienna, Austria.

graph traversal problem

Hinduja, S., Mansor, M.S.A. and Owodunni, O.O. (2010) Voronoi-diagram-based linking of contour-parallel tool paths for two-and-a-half-dimensional closed-pocket machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (9). pp. 1329-1350. ISSN 0954-4054 (Print), 2041-2975 (Online) (doi:10.1243/09544054JEM1596)

group technology

Strusevich, V.A. (2000) Group technology approach to the open shop scheduling problem with batch setup times. Operations Research Letters, 26 (4). pp. 181-192. ISSN 0167-6377 (doi:10.1016/S0167-6377(00)00021-3)

handling

Khan, Naushad Salim (2008) Handling characteristics of coal/biomass mixes: measurements and establishing benchmarks. PhD thesis, University of Greenwich.

health monitoring

Sutharssan, Thamo, Stoyanov, Stoyan, Bailey, Christopher and Rosunally, Yasmine (2012) Prognostics and health monitoring of high power LED. Micromachines, 3 (1). pp. 78-100. ISSN 2072-666X (doi:10.3390/mi3010078)

heat conductivity

Lai, C.-H., Ierotheou, C.S., Palansuriya, C.J. and Pericleous, K.A. (2001) Domain decomposition methods for welding problems. In: 12th International Conference on Domain Decomposition Methods in Sciences and Engineering. ddm.org, pp. 411-419.

heat transfer

Croft, T.N., Pericleous, K.A., Bobadilla, M. and Gardin, P. (2002) Three-phase computations of the continuous casting process. In: Proceedings of the 4th European Continuous Casting Conference. IOM Communications Ltd, London, England, UK, pp. 545-554.

Hughes, Michael, Pericleous, Koulis and Strusevitch, Nadia (2002) Modelling the fluid dynamics and coupled phenomena in arc weld pools. In: Mathematical Modelling of Weld Phenomena. Materials Modelling, 6 . Maney Publishing for the Institute of Materials, Minerals and Mining, London, England, UK, pp. 63-81. ISBN 9781902653563

Williams, A.J., Croft, T.N. and Cross, M. (2003) Modeling of ingot development during the start-up phase of direct chill casting. Metallurgical and Materials Transactions B, 34 (5). pp. 727-734. ISSN 1073-5615 (Print), 1543-1916 (Online) (doi:10.1007/s11663-003-0042-9)

High Performance Primitive Collections

McManus, K., Cross, M., Walshaw, C., Johnson, S., Bailey, C., Pericleous, K., Slone, A. and Chow, P. (2000) Virtual manufacturing and design in the real world - implementation and scalability on HPPC systems. In: Parallel Computational Fluid Dynamics 1999: Towards Teraflops, Optimization and Novel Formulations. North-Holland, Amsterdam, The Netherlands, pp. 47-56. ISBN 978044482851 (doi:10.1016/B978-044482851-4.50009-8)

high-aspect ratio microfabrication

Chen, H., Yu, W., Cargill, S., Patel, M.K., Bailey, C., Tonry, C. and Desmulliez, M.P.Y. (2012) Self-encapsulated hollow microstructures formed by electric field-assisted capillarity. Microfluidics and Nanofluidics, 13 (1). pp. 75-82. ISSN 1613-4982 (Print), 1613-4990 (Online) (doi:10.1007/s10404-012-0942-6)

high-speed impacts

Deng, Tong, Farnish, Richard J. and Bradley, Michael S.A. (2008) Evaluation of particle degradation due to high-speed impacts in a pneumatic handling system. Particulate Science and Technology, 26 (5). pp. 438-450. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:10.1080/02726350802367522)

hollow microstucture

Chen, H., Yu, W., Cargill, S., Patel, M.K., Bailey, C., Tonry, C. and Desmulliez, M.P.Y. (2012) Self-encapsulated hollow microstructures formed by electric field-assisted capillarity. Microfluidics and Nanofluidics, 13 (1). pp. 75-82. ISSN 1613-4982 (Print), 1613-4990 (Online) (doi:10.1007/s10404-012-0942-6)

HPPC

McManus, K., Cross, M., Walshaw, C., Johnson, S., Bailey, C., Pericleous, K., Slone, A. and Chow, P. (2000) Virtual manufacturing and design in the real world - implementation and scalability on HPPC systems. In: Parallel Computational Fluid Dynamics 1999: Towards Teraflops, Optimization and Novel Formulations. North-Holland, Amsterdam, The Netherlands, pp. 47-56. ISBN 978044482851 (doi:10.1016/B978-044482851-4.50009-8)

hydraulic machinery

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

Jones, Mark G. (1988) The influence of bulk particulate properties on pneumatic conveying performance. PhD thesis, Thames Polytechnic.

hydraulic systems

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

Kessel, Stephen Ronald (1985) The interaction between rotary valves and pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

hydrogen chloride

Wang, Zhaozhi, Galea, Edwin R., Jia, Fuchen, Ewer, John and Patel, Mayur (2007) Predicting HCI concentrations in fire enclosures using a HCI decay model coupled to a CFD based fire field model. Fire and Materials, 31 (7). pp. 443-461. ISSN 0308-0501 (doi:10.1002/fam.942)

impact

Chapelle, Pierre, Abou-Chakra, Hadi, Christakis, Nicholas, Patel, Mayur, Abu-Nahar, Azlina, Tüzün, Ugur and Cross, Mark (2004) Computational model for prediction of particle degradation during dilute phase pneumatic conveying: the use of a laboratory scale degradation tester for the determination of degradation propensity. Advanced Powder Technology, 15 (1). pp. 13-29. ISSN 0921-8831 (doi:10.1163/15685520460740043)

in-process measurement

Li, Yingguang, Liu, Changqing, Hao, Xiaozhong, Gao, James X. and Maropoulos, Paul G. (2015) Responsive fixture design using dynamic product inspection and monitoring technologies for the precision machining of large-scale aerospace parts. CIRP Annals - Manufacturing Technology, 64 (1). pp. 173-176. ISSN 0007-8506 (doi:10.1016/j.cirp.2015.04.025)

induction heating

Pericleous, K.A., Bojarevics, V., Djambazov, G., Harding, R.A. and Wickins, M. (2005) Maximising heat transfer efficiency in the cold crucible induction melting process. In: EUROTHERM Seminar 82. Numerical Heat Transfer 2005 [Proceedings]. Institute of Thermal Technology, Silesian University of Technology, Gliwice, Poland, pp. 405-414. ISBN 8392238125

induction melting

Bojarevics, V., Pericleous, K., Harding, R. and Wickins, M. (2003) Induction skull-melting dynamics for different materials: numerical modeling and comparisons with experiments. In: Proceedings of the Tenth International Conference on Modeling of Casting, Welding and Advanced Solidification Processes. The Mineral, Metals and Materials Society (TMS), Warrendale, PA, USA, pp. 591-598. ISBN 0873395557

induction skull melting

Bojarevics, V., Djambazov, G., Harding, R.A., Pericleous, K. and Wickins, M. (2002) Investigation of the cold crucible melting process: experimental and numerical study. In: Proceedings of the 5th International pamir Conference. Cost P6 Annual Workshop 2002. Fundamental and Applied MHD. International pamir Conference, II.77-II.82.

induction skull melting (ISM)

Bojarevics, V., Pericleous, K., Harding, R. and Wickins, M. (2003) Induction skull-melting dynamics for different materials: numerical modeling and comparisons with experiments. In: Proceedings of the Tenth International Conference on Modeling of Casting, Welding and Advanced Solidification Processes. The Mineral, Metals and Materials Society (TMS), Warrendale, PA, USA, pp. 591-598. ISBN 0873395557

industrial partners

Bailey, Chris, Lu, Hua and Yin, Chunyan (2010) Modelling reliability of power electronics packaging. In: Proceedings of the ASME InterPack Conference 2009, IPACK2009. American Society of Mechanical Engineers, New York, USA, pp. 215-220. ISBN 9780791843604 (doi:10.1115/InterPACK2009-89430)

industrial plants

Bailey, C., Patel, M. and Kumar, S. (2001) Computational modelling-a key component in materials processing. Transactions of the Institution of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy, 110 (1). pp. 25-32. ISSN 0371-9553 (Print), 1743-2855 (Online) (doi:10.1179/mpm.2001.110.1.25)

industrial processes

Taylor, Gareth Anthony (1996) A vertex based discretisation scheme applied to material non-linearity within a multi-physics finite volume framework. PhD thesis, University of Greenwich.

industry

Khan, Naushad Salim (2008) Handling characteristics of coal/biomass mixes: measurements and establishing benchmarks. PhD thesis, University of Greenwich.

industry sectors

Mileman, Tony, Knight, Brian, Petridis, Miltos, Preddy, Keith and Mejasson, Patrick (2000) Maintenance of a case-base for the retrieval of rotationally symmetric shapes for the design of metal castings. In: Blanzieri, Enrico and Portinale, Luigi, (eds.) Advances in Case-Based Reasoning: 5th European Workshop, EWCBR 2000 Trento, Italy, September 6–9, 2000 Proceedings. Lecture Notes in Computer Science: Lecture Notes in Artificial Intelligence (1898). Springer Berlin Heidelberg, Berlin, Heidelberg, Germany, pp. 418-430. ISBN 9783540679332 ISSN 0302-9743 (doi:10.1007/3-540-44527-7_36)

inertia

Phillips, T.N. and Williams, A.J. (2002) Comparison of creeping and inertial flow of an Oldroyd B fluid through planar and axisymmetric contractions. Journal of Non-Newtonian Fluid Mechanics, 108 (1-3). pp. 25-47. ISSN 0377-0257 (doi:10.1016/S0377-0257(02)00123-4)

innovative manufacturing processes

Mountney, Sara, Roy, Rajkumar and Gao, James (2011) Acquiring innovative manufacturing engineering knowledge for the preliminary design of complex mechanical components. In: Bernard, Alain, (ed.) Global Product Development. Springer, Berlin / Heidelberg, pp. 457-464. ISBN 978-3-642-15973-2 (doi:10.1007/978-3-642-15973-2_46)

instabilities

Chen, H., Yu, W., Cargill, S., Patel, M.K., Bailey, C., Tonry, C. and Desmulliez, M.P.Y. (2012) Self-encapsulated hollow microstructures formed by electric field-assisted capillarity. Microfluidics and Nanofluidics, 13 (1). pp. 75-82. ISSN 1613-4982 (Print), 1613-4990 (Online) (doi:10.1007/s10404-012-0942-6)

integrated

Umeadi, Bonny B.N. and Jones, K.G. (2008) The development of an intelligent sensor for the monitoring of pipeline system integrity. In: SPE Russian oil and gas technical conference and exhibition 2008 : 28-30 October 2008, Moscow, Russia. Society of Petroleum Engineers, New York, USA. ISBN 9781605607795 (doi:10.2118/115503-MS)

integrated circuit

Yin, C.Y., Lu, H., Bailey, C. and Chan, Y.C. (2004) Effects of reflow process on the reliability of flip chip on flex interconnections using anisotropic conductive adhesives. In: 2004 International IEEE Conference on Asian Green Electronics (AGEC) [Proceedings]. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 240-245. ISBN 0-7803-8203-X (doi:10.1109/AGEC.2004.1290912)

integrated circuit interconnections

Yin, Chunyan, Lu, Hua, Bailey, Chris and Chan, Yan-Cheong (2004) Effects of solder reflow on the reliability of flip-chip on flex interconnections using anisotropic conductive adhesives. IEEE Transactions on Electronics Packaging Manufacturing, 27 (4). pp. 254-259. ISSN 1521-334X (doi:10.1109/TEPM.2004.843152)

integrated circuit reliability

Yin, C.Y., Lu, H., Bailey, C. and Chan, Y.C. (2004) Effects of reflow process on the reliability of flip chip on flex interconnections using anisotropic conductive adhesives. In: 2004 International IEEE Conference on Asian Green Electronics (AGEC) [Proceedings]. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 240-245. ISBN 0-7803-8203-X (doi:10.1109/AGEC.2004.1290912)

Yin, Chunyan, Lu, Hua, Bailey, Chris and Chan, Yan-Cheong (2004) Effects of solder reflow on the reliability of flip-chip on flex interconnections using anisotropic conductive adhesives. IEEE Transactions on Electronics Packaging Manufacturing, 27 (4). pp. 254-259. ISSN 1521-334X (doi:10.1109/TEPM.2004.843152)

integrated optoelectronics

Gwyer, D., Misselbrook, P., Bailey, C., Conway, P.P. and Williams, K. (2004) Polymer waveguide and VCSEL array multi-physics modelling for OECB based optical backplanes [opto-electrical circuit boards]. In: Proceedings of the 5th International Conference on Thermal and Mechanical Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2004. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 399-406. ISBN 0780384202 (doi:10.1109/ESIME.2004.1304070)

Gwyer, D., Misselbrook, P., Philpott, D., Bailey, C., Conway, P.P. and Williams, K. (2004) Thermal, mechanical and optical modelling of VCSEL packaging. In: The Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena In Electronic Systems (ITHERM 2004) [Proceedings]. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 405-410. ISBN 0780383575 ISSN 1089-9870 (doi:10.1109/ITHERM.2004.1318311)

interconnections

Yin, C.Y., Lu, H., Bailey, C. and Chan, Y.C. (2004) Effects of reflow process on the reliability of flip chip on flex interconnections using anisotropic conductive adhesives. In: 2004 International IEEE Conference on Asian Green Electronics (AGEC) [Proceedings]. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 240-245. ISBN 0-7803-8203-X (doi:10.1109/AGEC.2004.1290912)

interfaces (computer)

Bailey, C., Patel, M. and Kumar, S. (2001) Computational modelling-a key component in materials processing. Transactions of the Institution of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy, 110 (1). pp. 25-32. ISSN 0371-9553 (Print), 1743-2855 (Online) (doi:10.1179/mpm.2001.110.1.25)

irradiation-produced

Arokiam, A. C., Barashev, A. V., Bacon, D. J. and Osetsky, Yu. N. (2006) Characteristics of the interaction of Cu-rich precipitates with irradiation-produced defects in α-Fe. Philosophical Magazine Letters, 85 (9). pp. 491-501. ISSN 0950–0839 (Print), 1362–3036 (Online) (doi:/10.1080/09500830500300047)

IT

Soper, Alan and Strusevich, Vitaly A. (2006) Two-machine flow shop scheduling with an interstage transporter: two shipments. In: Dolgui, Alexandre, Morel, Gerard and Pereira, Carlos Eduardo, (eds.) Information Control Problems in Manufacturing 2006: A Proceedings volume from the 12th IFAC International Symposium, St Etienne, France, 17-19 May 2006. IFAC Proceedings Volumes, 3 . Elsevier Ltd., Oxford, UK, pp. 27-32. ISBN 978-0-08-044654-7

IT & software

Mileman, Tony, Knight, Brian, Petridis, Miltos, Preddy, Keith and Mejasson, Patrick (2000) Maintenance of a case-base for the retrieval of rotationally symmetric shapes for the design of metal castings. In: Blanzieri, Enrico and Portinale, Luigi, (eds.) Advances in Case-Based Reasoning: 5th European Workshop, EWCBR 2000 Trento, Italy, September 6–9, 2000 Proceedings. Lecture Notes in Computer Science: Lecture Notes in Artificial Intelligence (1898). Springer Berlin Heidelberg, Berlin, Heidelberg, Germany, pp. 418-430. ISBN 9783540679332 ISSN 0302-9743 (doi:10.1007/3-540-44527-7_36)

J-integral

Gradin, P.A., Graham, D., Nygård, P. and Vallen, H. (2007) The use of acoustic emission monitoring to rank paper materials with respect to their fracture toughness. Experimental Mechanics, 48 (1). pp. 133-137. ISSN 0014-4851 (Print), 1741-2765 (Online) (doi:10.1007/s11340-007-9055-7)

job shop

Potts, C.N., Strusevich, V.A. and Tautenhahn, T. (2001) Scheduling batches with simultaneous job processing for two-machine shop problems. Journal of Scheduling, 4 (1). pp. 25-51. ISSN 1094-6136 (Print), 1099-1425 (Online) (doi:10.1002/1099-1425(200101/02)4:1<25::AID-JOS58>3.0.CO;2-7)

kinematic-hardening

Ridout, Stephen, Bailey, Christopher, Dusek, Milos and Hunt, C (2007) Constitutive modeling of kinematic-hardening and damage in solder joints. Proceedings of the 1st Electronics Systemintegration Technology Conference, 2006. IEEE, pp. 927-933. ISBN 1-4244-0552-1 (doi:10.1109/ESTC.2006.280122)

knowledge sharing

Mountney, Sara, Roy, Rajkumar and Gao, James (2011) Acquiring innovative manufacturing engineering knowledge for the preliminary design of complex mechanical components. In: Bernard, Alain, (ed.) Global Product Development. Springer, Berlin / Heidelberg, pp. 457-464. ISBN 978-3-642-15973-2 (doi:10.1007/978-3-642-15973-2_46)

laboratories

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

Lagrangian

Slone, Avril, Fallah, Nosrat, Bailey, Christopher and Cross, Mark (2002) A finite volume approach to geometrically non-linear stress analysis. In: Finite volumes for complex applications III: problems and perspectives. Hermes Penton Science, London, UK, pp. 663-670. ISBN 9781903996348

lase welding

Strusevich, Nadezhda V., Pericleous, Koulis and Hughes, Michael (2002) Characterisation of weldpool shapes in the laser welding of thick plates. In: Mathematical Modelling of Weld Phenomena. Materials Modelling, 6 . Maney Publishing for the Institute of Materials, Minerals and Mining, London, England, UK, pp. 83-92. ISBN 9781902653563

laser spot weld formation

Malik, Asif, Hughes, Michael and Bailey, Christopher (2006) Optoelectronic packaging interfaces for submicron alignment (OPISA) and the dynamics of laser spot weld formation. Proceedings of the 1st Electronics Systemintegration Technology Conference, 2006. IEEE, pp. 387-391. ISBN 1 4244 0552 1 (doi:10.1109/ESTC.2006.280031)

latency

Sparrow, R.D., Adekunle, A.A., Berry, R.J. and Farnish, R.J. (2015) Balancing throughput and latency for an aerial robot over a wireless secure communication link. In: 2015 IEEE 2nd International Conference on Cybernetics (CYBCONF). IEEE, pp. 184-189. ISBN 978-1-4799-8320-9 (doi:10.1109/CYBConf.2015.7175929)

lead-free solders

Lu, Hua and Bailey, Chris (2003) Modelling the performance of lead-Free solder interconnects for copper bumped flip-chip devices. In: ASME 2003 International Electronic Packaging Technical Conference and Exhibition. American Society of Mechanical Engineers, New York, USA, pp. 605-610. ISBN 0-7918-3690-8 (doi:10.1115/IPACK2003-35356)

lean phase

Abou-Chakra, Hadi, Baxter, John, Tuzun, Ugur, Chapelle, Pierre, Patel, Mayur, Bridle, Ian, Bradley, Michael S.A. and Reed, Alan R. (2004) Degradation toolkit for predicting the amount of degradation of particulate solids in lean phase pneumatic conveyors. In: International Conference for Particle Technology (PARTEC 2004), 16-18 March 2004, Nuremberg, Germany. (Unpublished)

LEDs

Sutharssan, T., Stoyanov, S., Bailey, C. and Rosunally, Y. (2012) Data analysis techniques for real-time prognostics and health management of semiconductor devices. In: Microelectronics and Packaging. Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ, USA, pp. 1-7. ISBN 978-1-4673-0694-2 (print)

Sutharssan, Thamo, Bailey, Chris, Stoyanov, Stoyan and Rosunally, Yasmine (2011) Prognostics and reliability assessment of light emitting diode packaging. In: Electronic Packaging Technology and High Density Packaging (ICEPT-HDP), 2011 12th International Conference on. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 1-7. ISBN 978-1-4577-1770-3 (print), 978-1-4577-1768-0 (eISBN) (doi:10.1109/ICEPT.2011.6066984)

Sutharssan, Thamo, Stoyanov, Stoyan, Bailey, Christopher and Rosunally, Yasmine (2012) Prognostics and health monitoring of high power LED. Micromachines, 3 (1). pp. 78-100. ISSN 2072-666X (doi:10.3390/mi3010078)

levitation modelling

Bojarevics, V. and Pericleous, K. (2003) AC and DC magnetic levitation: melting, fluid flow and oscillations. In: 4th International Conference on Electromagnetic Processing of Materials, 14-17 Oct 2003, Lyon, France.

lifetime prediction

Hanson, R., Allsopp, D., Deng, T., Smith, D., Bradley, M.S.A., Hutchings, I.M. and Patel, M.K. (2002) A model to predict the life of pneumatic conveyor bends. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 216 (3). pp. 143-149. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/095440802320225284)

light emitting diodes

Sutharssan, T., Stoyanov, S., Bailey, C. and Rosunally, Y. (2012) Data analysis techniques for real-time prognostics and health management of semiconductor devices. In: Microelectronics and Packaging. Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ, USA, pp. 1-7. ISBN 978-1-4673-0694-2 (print)

Sutharssan, Thamo, Bailey, Chris, Stoyanov, Stoyan and Rosunally, Yasmine (2011) Prognostics and reliability assessment of light emitting diode packaging. In: Electronic Packaging Technology and High Density Packaging (ICEPT-HDP), 2011 12th International Conference on. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 1-7. ISBN 978-1-4577-1770-3 (print), 978-1-4577-1768-0 (eISBN) (doi:10.1109/ICEPT.2011.6066984)

Sutharssan, Thamo, Stoyanov, Stoyan, Bailey, Christopher and Rosunally, Yasmine (2012) Prognostics and health monitoring of high power LED. Micromachines, 3 (1). pp. 78-100. ISSN 2072-666X (doi:10.3390/mi3010078)

liquid metals

Bojarevics, V. and Pericleous, K. (2001) Modelling induction melting energy savings. In: Proceedings of the International Colloquium. Modelling for Saving Resources. Riga, May 17-18, 2001. Laboratory for Mathematical Modelling of Environmental and Technological Processes, University of Latvia, Riga, Latvia, pp. 11-16. ISBN 998466189X

machining optimisation

Owodunni, O.O., Zhang, T. and Gao, J. (2013) Energy consideration in machining operations - towards explanatory models for optimisation results. In: 11th Global Conference on Sustainable Manufacturing : Proceedings. Innovative Solutions. Universitätsverlag der TU Berlin, Berlin, Germany, pp. 153-158. ISBN 978-3-7983-2609-5

magnetic forces

Bojarevics, Valdis and Roy, Alan (2011) Effect of magnetic forces on bubble transport in aluminium electrolysis cells. In: Proceedings of the 8th PAMIR International Conference on Fundamental and Applied MHD. Laboratoire CNRS-EPM/SIMaP / Institute of Physics, University of Latvia, Corsica, France, pp. 453-457.

magnetic levitation

Bojarevics, V. and Pericleous, K. (2003) AC and DC magnetic levitation: melting, fluid flow and oscillations. In: 4th International Conference on Electromagnetic Processing of Materials, 14-17 Oct 2003, Lyon, France.

Bojarevics, Valdis and Pericleous, Koulis (2003) Modelling electromagnetically levitated liquid droplet oscillations. ISIJ International, 43 (6). pp. 890-898. ISSN 0915-1559 (Print), 1347-5460 (Online) (doi:10.2355/isijinternational.43.890)

magnetic suspension

Bojarevics, V. and Pericleous, K. (2001) Dynamics of magnetically suspended fluid. In: 6th International Symposium on Magnetic Suspension Technology [Proceedings]. ISMST, pp. 287-292.

Magnetohydrodynamicsm thermocapillary

Hughes, Michael, Taylor, Gareth A. and Pericleous, Koulis (2000) Thermocapillary and magnetohydrodynamic effects in modelling the thermodynamics of stationary welding processes. Phoenics Journal of Computational Fluid Dynamics and Its Applications, 13 (1). pp. 99-113. ISSN 0969-8248

magneto–hydro-dynamics

Panaitescu, Ileana, Repetto, Maurizio, Leboucher, Laurent and Pericleous, Kyriacos (2000) Magneto-hydro-dynamic analysis of an electrolysis cell for aluminum production. IEEE Transactions on Magnetics, 36 (4). pp. 1305-1308. ISSN 0018-9464 (doi:10.1109/20.877679)

make to order

Pillai, Sreejit, Arokiam, Alan, Bhatti, Raj and Collins, T. (2011) Make to order manufacturing and operational management strategies – a case study at Priorclave Ltd. In: 18th International Annual EurOMA Conference: Exploring Interfaces, 3-6 Jul 2011, Cambridge, UK. (Unpublished)

make-to-order

Pillai, Sreejit (2015) A decision support system for ERP projects in make -to-order manufacturing SMEs. PhD thesis, University of Greenwich.

management systems

Pillai, Sreejit, Arokiam, Alan, Bhatti, Raj and Collins, T. (2011) Make to order manufacturing and operational management strategies – a case study at Priorclave Ltd. In: 18th International Annual EurOMA Conference: Exploring Interfaces, 3-6 Jul 2011, Cambridge, UK. (Unpublished)

manufacturing plant control

Soper, Alan and Strusevich, Vitaly A. (2006) Two-machine flow shop scheduling with an interstage transporter: two shipments. In: Dolgui, Alexandre, Morel, Gerard and Pereira, Carlos Eduardo, (eds.) Information Control Problems in Manufacturing 2006: A Proceedings volume from the 12th IFAC International Symposium, St Etienne, France, 17-19 May 2006. IFAC Proceedings Volumes, 3 . Elsevier Ltd., Oxford, UK, pp. 27-32. ISBN 978-0-08-044654-7

manufacturing processes

Burnett, Anthony John (1996) The use of laboratory erosion tests for the prediction of wear in pneumatic conveyor bends. PhD thesis, University of Greenwich.

Taylor, Gareth Anthony (1996) A vertex based discretisation scheme applied to material non-linearity within a multi-physics finite volume framework. PhD thesis, University of Greenwich.

Marangoni effect

Hughes, Michael, Taylor, Gareth A. and Pericleous, Koulis (2000) Thermocapillary and magnetohydrodynamic effects in modelling the thermodynamics of stationary welding processes. Phoenics Journal of Computational Fluid Dynamics and Its Applications, 13 (1). pp. 99-113. ISSN 0969-8248

materials

Burnett, Anthony John (1996) The use of laboratory erosion tests for the prediction of wear in pneumatic conveyor bends. PhD thesis, University of Greenwich.

Burnett, Anthony John (1996) The use of laboratory erosion tests for the prediction of wear in pneumatic conveyor bends. PhD thesis, University of Greenwich.

materials handling equipment

Burnett, A. J. (1993) Wear in pneumatic conveying pipelines. Powder Handling and Processing, 15 (2). pp. 123-128. ISSN 0934-7348

materials processing

Bailey, C., Patel, M. and Kumar, S. (2001) Computational modelling-a key component in materials processing. Transactions of the Institution of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy, 110 (1). pp. 25-32. ISSN 0371-9553 (Print), 1743-2855 (Online) (doi:10.1179/mpm.2001.110.1.25)

materials properties

Lu, Hua, Bailey, C. and Cross, M. (2000) Reliability analysis of flip chip designs via computer simulation. Journal of Electronic Packaging, 122 (3). pp. 214-219. ISSN 1528-9044 (Print), 1043-7398 (Online) (doi:10.1115/1.1286122)

materials science

Bailey, C., Patel, M. and Kumar, S. (2001) Computational modelling-a key component in materials processing. Transactions of the Institution of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy, 110 (1). pp. 25-32. ISSN 0371-9553 (Print), 1743-2855 (Online) (doi:10.1179/mpm.2001.110.1.25)

mathematical logic and formal languages

Woon, Fei Ling, Knight, Brian, Petridis, Miltos and Patel, Mayur (2005) CBE-conveyor: a case-based reasoning system to assist engineers in designing conveyor systems. In: Case-Based Reasoning Research and Development: 6th International Conference on Case-Based Reasoning, ICCBR 2005, Chicago, IL, USA, August 23-26, 2005. Proceedings. Lecture Notes in Computer Science (3620). Springer Berlin Heidelberg, Berlin, Heidelberg, Germany, pp. 640-651. ISBN 9783540281740 (doi:10.1007/11536406_48)

mathematical modelling

Hanson, R., Allsopp, D., Deng, T., Smith, D., Bradley, M.S.A., Hutchings, I.M. and Patel, M.K. (2002) A model to predict the life of pneumatic conveyor bends. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 216 (3). pp. 143-149. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/095440802320225284)

Pericleous, K.A., Bojarevics, V., Djambazov, G., Harding, R.A. and Wickins, M. (2005) Maximising heat transfer efficiency in the cold crucible induction melting process. In: EUROTHERM Seminar 82. Numerical Heat Transfer 2005 [Proceedings]. Institute of Thermal Technology, Silesian University of Technology, Gliwice, Poland, pp. 405-414. ISBN 8392238125

mathematical models

Burnett, A. J. (1993) Wear in pneumatic conveying pipelines. Powder Handling and Processing, 15 (2). pp. 123-128. ISSN 0934-7348

mathematics

Bailey, C., Clapham, S., Cross, M., Dixon, T., Wolfe, S. and Norman, P. (1996) Modelling stress evolution during cable fabrication. ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 76 (S4). pp. 97-100. ISSN 0044-2267 (Print), 1521-4001 (Online) (doi:10.1002/zamm.19960761408)

mechanical engineering

Li, Ji (2007) A study of the solid particle erosion performance of automative and other novel low carbon steels. PhD thesis, University of Greenwich.

mechanics

Bailey, C., Clapham, S., Cross, M., Dixon, T., Wolfe, S. and Norman, P. (1996) Modelling stress evolution during cable fabrication. ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 76 (S4). pp. 97-100. ISSN 0044-2267 (Print), 1521-4001 (Online) (doi:10.1002/zamm.19960761408)

melting

Pericleous, K.A., Bojarevics, V., Djambazov, G., Harding, R.A. and Wickins, M. (2005) Maximising heat transfer efficiency in the cold crucible induction melting process. In: EUROTHERM Seminar 82. Numerical Heat Transfer 2005 [Proceedings]. Institute of Thermal Technology, Silesian University of Technology, Gliwice, Poland, pp. 405-414. ISBN 8392238125

metal casting

Taylor, Gareth Anthony (1996) A vertex based discretisation scheme applied to material non-linearity within a multi-physics finite volume framework. PhD thesis, University of Greenwich.

metal welding

Lai, C.-H., Ierotheou, C.S., Palansuriya, C.J. and Pericleous, K.A. (2001) Domain decomposition methods for welding problems. In: 12th International Conference on Domain Decomposition Methods in Sciences and Engineering. ddm.org, pp. 411-419.

metals reduction process

Cross, M., Croft, T.N., Djambazov, G. and Pericleous, K. (2003) Computational modelling of bubbles, droplets and particles in metals reduction and refining. In: The 3rd International Conference on CFD in the Minerals and Process Industries [Proceedings]. CSIRO Publishing, Collingwood, Victoria, Australia, pp. 47-52. ISBN 978064309038X

micro manufacturing

Tang, Ying Kit (2012) A risk analysis methodology for micro/nano manufacturing. PhD thesis, University of Greenwich.

micro-generators

Skarvelis-Kazakos, Spyros, Rikos, Evangelos, Kolentini, Efstathia, Cipcigan, Liana M. and Jenkins, Nick (2013) Implementing agent-based emissions trading for controlling Virtual Power Plant emissions. Electric Power Systems Research, 102. ISSN 0378-7796 (doi:10.1016/j.epsr.2013.04.004)

micro-grids

Skarvelis-Kazakos, Spyros, Rikos, Evangelos, Kolentini, Efstathia, Cipcigan, Liana M. and Jenkins, Nick (2013) Implementing agent-based emissions trading for controlling Virtual Power Plant emissions. Electric Power Systems Research, 102. ISSN 0378-7796 (doi:10.1016/j.epsr.2013.04.004)

micro-mechanical parametrisations

Christakis, Nicholas, Chapelle, Pierre, Patel, Mayur K., Wang, Junye, Cross, Mark, Baxter, John, Gröger, Torsten, Abou-Chakra, Hadi, Tüzün, Ugur, Bridle, Ian and Leaper, Mark C. (2002) Mathematical modelling of the behaviour of granular material in a computational fluid dynamics framework using micro-mechanical models. In: 5th World Congress on Computational Mechanics (WCCM V), 7-12 Jul 2002, Vienna, Austria.

microfluidics

Chen, H., Yu, W., Cargill, S., Patel, M.K., Bailey, C., Tonry, C. and Desmulliez, M.P.Y. (2012) Self-encapsulated hollow microstructures formed by electric field-assisted capillarity. Microfluidics and Nanofluidics, 13 (1). pp. 75-82. ISSN 1613-4982 (Print), 1613-4990 (Online) (doi:10.1007/s10404-012-0942-6)

micromachining

Wang, Yi, Ke, Maolong and Lancaster, Michael J. (2009) Micromachined 60 GHz air-filled interdigital bandpass filter. In: International Workshop on Microwave Filters, 16-18 November 2009, Toulouse, France.

micromechanical parametrisations

Christakis, Nicholas, Chapelle, Pierre, Patel, Mayur K. and Cross, Mark (2006) On the continuum modelling of segregation of granular mixtures during hopper emptying in core flow mode. In: European Conference on Computational Fluid Dynamics ECCOMAS CFD 2006 Proceedings. TU Delft, The Netherlands, The Netherlands. ISBN 9090209700

microwave devices

Sinclair, Keith I., Goussetis, George, Desmulliez, Marc P.Y., Sangster, Alan J., Tilford, Tim, Bailey, Chris and Parrott, Kevin (2009) Polymer curing within an optimised open-ended microwave oven. In: European Microwave Week 2008, “Bridging Gaps”, Conference Proceedings,. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 17-20. ISBN 978-2-87487-006-4 (doi:10.1109/EUMC.2008.4751375)

microwave ovens

Sinclair, Keith I., Goussetis, George, Desmulliez, Marc P.Y., Sangster, Alan J., Tilford, Tim, Bailey, Chris and Parrott, Kevin (2009) Polymer curing within an optimised open-ended microwave oven. In: European Microwave Week 2008, “Bridging Gaps”, Conference Proceedings,. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 17-20. ISBN 978-2-87487-006-4 (doi:10.1109/EUMC.2008.4751375)

middleware

Anthony, Richard, Chen, DeJiu, Pelc, Mariusz, Persson, Magnus and Tӧrngren, Martin (2009) Context-aware adaptation in DySCAS. Electronic Communications of the EASST, 19. ISSN 1863-2122

millimeter wave

Wang, Yi, Ke, Maolong and Lancaster, Michael J. (2009) Micromachined 60 GHz air-filled interdigital bandpass filter. In: International Workshop on Microwave Filters, 16-18 November 2009, Toulouse, France.

mine railway safety

van Manen, P. (1984) The dynamic behaviour of rail vehicles operating at high speeds for manriding in British coal mines. PhD thesis, Thames Polytechnic.

minium wires

Bailey, Chris, Lu, Hua and Yin, Chunyan (2010) Modelling reliability of power electronics packaging. In: Proceedings of the ASME InterPack Conference 2009, IPACK2009. American Society of Mechanical Engineers, New York, USA, pp. 215-220. ISBN 9780791843604 (doi:10.1115/InterPACK2009-89430)

mixture of job and open shops

Shakhlevich, Natalia V., Sotskov, Yuri N. and Werner, Frank (2000) Complexity of mixed shop scheduling problems: A survey. European Journal of Operational Research, 120. pp. 343-351. ISSN 0377-2217 (doi:10.1016/S0377-2217(99)00161-7)

mobile and wireless communications

Arshad, Kamran and Moessner, Klaus (2013) Robust spectrum sensing based on statistical tests. IET Communications, 7 (9). pp. 808-817. ISSN 1751-8628 (doi:10.1049/iet-com.2012.0499)

mobile antennas

Callaghan, Peter and Batchelor, John C. (2008) Multiband low-profile antenna for remote antenna unit picocell applications. IEEE Transactions on Antennas and Propagation, 56 (8). pp. 2475-2480. ISSN 0018-926X (doi:10.1109/TAP.2008.927558)

mode shape expansion

Chen, Hua-Peng (2008) Mode shape expansion using perturbed force vector approach. In: Sixteenth UK Conference of the Association of Computational Mechanics in Engineering (ACME UK), 1-2 Apr 2008, Newcastle upon Tyne, UK. (Unpublished)

model testing

Chen, Hua-Peng (2008) Mode shape expansion using perturbed force vector approach. In: Sixteenth UK Conference of the Association of Computational Mechanics in Engineering (ACME UK), 1-2 Apr 2008, Newcastle upon Tyne, UK. (Unpublished)

modeling

Lu, Hua and Bailey, Chris (2003) Modelling the performance of lead-Free solder interconnects for copper bumped flip-chip devices. In: ASME 2003 International Electronic Packaging Technical Conference and Exhibition. American Society of Mechanical Engineers, New York, USA, pp. 605-610. ISBN 0-7918-3690-8 (doi:10.1115/IPACK2003-35356)

modelling

Stoyanov, S., Bailey, C., Saxena, N. and Adams, S. (2004) Modelling the wave soldering process. In: Proceedings of the 6th International Conference on Electronics Materials and Packaging (EMAP 2004). Institute of Electrical and Electronics Engineers, pp. 553-558. ISBN 983251486X

modelling error

Chen, Hua-Peng (2008) Mode shape expansion using perturbed force vector approach. In: Sixteenth UK Conference of the Association of Computational Mechanics in Engineering (ACME UK), 1-2 Apr 2008, Newcastle upon Tyne, UK. (Unpublished)

modelling tools

Bailey, Chris, Lu, Hua and Yin, Chunyan (2010) Modelling reliability of power electronics packaging. In: Proceedings of the ASME InterPack Conference 2009, IPACK2009. American Society of Mechanical Engineers, New York, USA, pp. 215-220. ISBN 9780791843604 (doi:10.1115/InterPACK2009-89430)

monitor

Umeadi, Bonny B.N. and Jones, K.G. (2008) The development of an intelligent sensor for the monitoring of pipeline system integrity. In: SPE Russian oil and gas technical conference and exhibition 2008 : 28-30 October 2008, Moscow, Russia. Society of Petroleum Engineers, New York, USA. ISBN 9781605607795 (doi:10.2118/115503-MS)

morphology

Xu, Sha, Chan, Yan Cheong, Zhu, Xiaoxin, Lu, Hua and Bailey, Chris (2014) Effective method to disperse and incorporate carbon nanotubes in electroless Ni-P deposits. In: 2014 IEEE 64th Electronic Components and Technology Conference (ECTC) Proceedings. Curran Associates, Stoughton, WI, USA, pp. 1342-1347. ISBN 9781479924080 (doi:10.1109/ECTC.2014.6897466)

mould filling

Pericleous, Koulis A., Djambazov, G. and Wang, Hong (2006) Numerical modelling of the low-superheat casting of thin-section components. In: Gandin, Charles-André and Bellet, Michel, (eds.) Modeling of casting, welding, and advanced solidification XI : proceedings from the Eleventh International Conference on Modelling of Casting, Welding and Advanced Solidification Processes. TMS - The Minerals Metals and Materials Society, Warrendale, Pennsylvania, USA. ISBN 9780873396295

multi-agent systems

Skarvelis-Kazakos, Spyros, Rikos, Evangelos, Kolentini, Efstathia, Cipcigan, Liana M. and Jenkins, Nick (2013) Implementing agent-based emissions trading for controlling Virtual Power Plant emissions. Electric Power Systems Research, 102. ISSN 0378-7796 (doi:10.1016/j.epsr.2013.04.004)

multi-physics

Cross, Mark, Stoyanov, Stoyan, Mouchmov, Apostol, Lu, Hua, Croft, Nick, Slone, Avril, Williams, Alison, Bailey, Chris and Pericleous, Koulis (2003) Multi-physics-multi-scale simulation and optimisation: the next generation. In: NAFEMS World Congress, 2003, Orlando, Florida, USA.

multi-scale modelling

Kao, A. and Pericleous, K. (2012) A multi scale method for thermo-electric MHD in dendritic solidification. Journal of Iron and Steel International, 19 (S1-1). pp. 317-321. ISSN 1006-706X

multi-scale simulations

Cross, Mark, Stoyanov, Stoyan, Mouchmov, Apostol, Lu, Hua, Croft, Nick, Slone, Avril, Williams, Alison, Bailey, Chris and Pericleous, Koulis (2003) Multi-physics-multi-scale simulation and optimisation: the next generation. In: NAFEMS World Congress, 2003, Orlando, Florida, USA.

multiple-band antennas

Callaghan, Peter and Batchelor, John C. (2008) Multiband low-profile antenna for remote antenna unit picocell applications. IEEE Transactions on Antennas and Propagation, 56 (8). pp. 2475-2480. ISSN 0018-926X (doi:10.1109/TAP.2008.927558)

nano manufacturing

Tang, Ying Kit (2012) A risk analysis methodology for micro/nano manufacturing. PhD thesis, University of Greenwich.

negative Poisson’s ratio

Javadi, Akbar, Faramarzi, Asaad, Farmani, Raziyeh and Evans, Ken (2009) Design of microstructure and topological optimisation of auxetic materials. In: Proceedings of the 17th UK Conference on Computational Mechanics. Spencer Institute of Theoretical and Computational Mechanics, Unversity of Nottingham, Nottingham, UK, pp. 251-260. ISBN 9780853582557

Networked Control Systems

Sparrow, R. D., Adekunle, Andrew, Berry, Robert and Farnish, Richard (2015) Study of two security constructs on throughput for wireless sensor multi-hop networks. In: 38th International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO), 2015, 25-29th May, Opatija. (doi:10.1109/MIPRO.2015.7160476)

newmark algorithm

Slone, A.K., Cross, M., Pericleous, K.A. and Bailey, C. (2001) A finite volume unstructured mesh approach to dynamic fluid-structure interaction: an assessment of the challenge of flutter analysis. In: Trends in Computational Structural Mechanics. International Center for Numerical Methods in Engineering (CIMNE), Barcelona, Spain, pp. 741-750. ISBN 8489925771

Slone, A.K., Pericleous, K., Bailey, C. and Cross, M. (2001) Dynamic fluid-structure interaction using finite volume unstructured mesh procedures. In: European Conference on Computational Fluid Dynamics ECCOMAS CFD 2006 Proceedings. ECCOMAS. ISBN 0905091124

Newton Raphson

Slone, Avril, Fallah, Nosrat, Bailey, Christopher and Cross, Mark (2002) A finite volume approach to geometrically non-linear stress analysis. In: Finite volumes for complex applications III: problems and perspectives. Hermes Penton Science, London, UK, pp. 663-670. ISBN 9781903996348

no-flow underfill materials

Lu, H., Stoyanov, S., Bailey, C., Hung, K.C. and Chan, Y.C. (2001) A modelling and experimental analysis of the no-flow underfill process for flip-chip assembly. In: Proceedings of the 4th International Symposium on Electronic Packaging Technology. Institute of Electrical and Electronics Engineers, Inc., pp. 338-343. ISBN 0780398114

no-wait in process

Kubzin, Mikhail A. and Strusevich, Vitaly A. (2004) Two-machine flowshop scheduling problems with no-wait jobs. Naval Research Logistics, 51 (4). pp. 613-631. ISSN 0894-069X (Print), 1520-6750 (Online) (doi:10.1002/nav.10118)

non-linear

Slone, Avril, Fallah, Nosrat, Bailey, Christopher and Cross, Mark (2002) A finite volume approach to geometrically non-linear stress analysis. In: Finite volumes for complex applications III: problems and perspectives. Hermes Penton Science, London, UK, pp. 663-670. ISBN 9781903996348

non-Newtonian flow

Williams, A.J., Croft, T.N. and Cross, M. (2002) Computational modelling of metals forming processes. In: The 5th International EASFORM Conference on Material Forming [Proceedings]. Akapit Publishing, Kraków, Poland, pp. 67-70. ISBN 8371080980

nonavailability interval

Kubzin, Mikhail A. and Strusevich, Vitaly A. (2004) Two-machine flowshop scheduling problems with no-wait jobs. Naval Research Logistics, 51 (4). pp. 613-631. ISSN 0894-069X (Print), 1520-6750 (Online) (doi:10.1002/nav.10118)

nonlinear flow

Mallik, Sabuj, Chan, Erica Hiu Laam and Ekere, Ndy (2012) Nonlinear Viscoelastic Characteristics of Sn-Ag-Cu Solder Pastes Used in Electronics Assembly Applications. Journal of Materials Engineering and Performance, 22 (4). pp. 1186-1193. ISSN 1059-9495 (Print), 1544-1024 (Online) (doi:10.1007/s11665-012-0360-7)

NP-hard

Potts, C.N., Strusevich, V.A. and Tautenhahn, T. (2001) Scheduling batches with simultaneous job processing for two-machine shop problems. Journal of Scheduling, 4 (1). pp. 25-51. ISSN 1094-6136 (Print), 1099-1425 (Online) (doi:10.1002/1099-1425(200101/02)4:1<25::AID-JOS58>3.0.CO;2-7)

NP-hard problem

Shakhlevich, Natalia V., Sotskov, Yuri N. and Werner, Frank (2000) Complexity of mixed shop scheduling problems: A survey. European Journal of Operational Research, 120. pp. 343-351. ISSN 0377-2217 (doi:10.1016/S0377-2217(99)00161-7)

numerical approach

Slone, A.K., Williams, A.J., Grossman, D., Croft, T.N. and Cross, M. (2003) A generic time and space accurate numerical approach to closely coupled fluid-structure interaction problems. In: NAFEMS World Congress 2003, 2003, Orlando, Florida, USA.

numerical modelling

Aboubacar, M., Phillips, T.N., Tamaddon-Jahromi, H.R., Webster, M.K. and Williams, A.J. (2002) Numerical Simulation of Contraction Flows for Boger Fluids using Finite Volume Methods. In: Proceedings of the 6th European Conference of Rheology, (eurheo 2002). LSP, Institute of Polymer Materials, Erlangen-Nuremberg, Germany, pp. 279-280.

Bojarevics, V., Pericleous, K., Harding, R. and Wickins, M. (2003) Induction skull-melting dynamics for different materials: numerical modeling and comparisons with experiments. In: Proceedings of the Tenth International Conference on Modeling of Casting, Welding and Advanced Solidification Processes. The Mineral, Metals and Materials Society (TMS), Warrendale, PA, USA, pp. 591-598. ISBN 0873395557

Slone, A.K., Pericleous, K., Bailey, C. and Cross, M. (2001) Details of an integrated approach to three-dimensional dynamic fluid structure interaction. In: Fluid Structure Interaction. WIT Press, Southampton, UK, pp. 57-66. ISBN 1853128813 ISSN 1353-808x

numerical simulation

Pericleous, Koulis A., Djambazov, G. and Wang, Hong (2006) Numerical modelling of the low-superheat casting of thin-section components. In: Gandin, Charles-André and Bellet, Michel, (eds.) Modeling of casting, welding, and advanced solidification XI : proceedings from the Eleventh International Conference on Modelling of Casting, Welding and Advanced Solidification Processes. TMS - The Minerals Metals and Materials Society, Warrendale, Pennsylvania, USA. ISBN 9780873396295

oil

Umeadi, Bonny B.N. and Jones, K.G. (2008) The development of an intelligent sensor for the monitoring of pipeline system integrity. In: SPE Russian oil and gas technical conference and exhibition 2008 : 28-30 October 2008, Moscow, Russia. Society of Petroleum Engineers, New York, USA. ISBN 9781605607795 (doi:10.2118/115503-MS)

Oldroyd B model

Phillips, T.N. and Williams, A.J. (2002) Comparison of creeping and inertial flow of an Oldroyd B fluid through planar and axisymmetric contractions. Journal of Non-Newtonian Fluid Mechanics, 108 (1-3). pp. 25-47. ISSN 0377-0257 (doi:10.1016/S0377-0257(02)00123-4)

open shop

Potts, C.N., Strusevich, V.A. and Tautenhahn, T. (2001) Scheduling batches with simultaneous job processing for two-machine shop problems. Journal of Scheduling, 4 (1). pp. 25-51. ISSN 1094-6136 (Print), 1099-1425 (Online) (doi:10.1002/1099-1425(200101/02)4:1<25::AID-JOS58>3.0.CO;2-7)

Strusevich, V.A. (2000) Group technology approach to the open shop scheduling problem with batch setup times. Operations Research Letters, 26 (4). pp. 181-192. ISSN 0167-6377 (doi:10.1016/S0167-6377(00)00021-3)

open shop scheduling

Breit, J., Schmidt, G. and Strusevich, V.A. (2003) Non-preemptive two-machine open shop scheduling with non-availability constraints. Mathematical Methods of Operations Research, 57 (2). pp. 217-234. ISSN 1432-2994 (Print), 1432-5217 (Online) (doi:10.1007/s001860200267)

OPISA

Malik, Asif, Hughes, Michael and Bailey, Christopher (2006) Optoelectronic packaging interfaces for submicron alignment (OPISA) and the dynamics of laser spot weld formation. Proceedings of the 1st Electronics Systemintegration Technology Conference, 2006. IEEE, pp. 387-391. ISBN 1 4244 0552 1 (doi:10.1109/ESTC.2006.280031)

optical backplanes

Gwyer, D., Misselbrook, P., Philpott, D., Bailey, C., Conway, P.P. and Williams, K. (2004) Thermal, mechanical and optical modelling of VCSEL packaging. In: The Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena In Electronic Systems (ITHERM 2004) [Proceedings]. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 405-410. ISBN 0780383575 ISSN 1089-9870 (doi:10.1109/ITHERM.2004.1318311)

optical backplanes optical planar waveguides

Gwyer, D., Misselbrook, P., Bailey, C., Conway, P.P. and Williams, K. (2004) Polymer waveguide and VCSEL array multi-physics modelling for OECB based optical backplanes [opto-electrical circuit boards]. In: Proceedings of the 5th International Conference on Thermal and Mechanical Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2004. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 399-406. ISBN 0780384202 (doi:10.1109/ESIME.2004.1304070)

optical waveguides photodiodes

Gwyer, D., Misselbrook, P., Philpott, D., Bailey, C., Conway, P.P. and Williams, K. (2004) Thermal, mechanical and optical modelling of VCSEL packaging. In: The Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena In Electronic Systems (ITHERM 2004) [Proceedings]. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 405-410. ISBN 0780383575 ISSN 1089-9870 (doi:10.1109/ITHERM.2004.1318311)

optimal scheduling

Shakhlevich, Natalia V., Sotskov, Yuri N. and Werner, Frank (2000) Complexity of mixed shop scheduling problems: A survey. European Journal of Operational Research, 120. pp. 343-351. ISSN 0377-2217 (doi:10.1016/S0377-2217(99)00161-7)

optoelectronic packaging

Malik, Asif, Hughes, Michael and Bailey, Christopher (2006) Optoelectronic packaging interfaces for submicron alignment (OPISA) and the dynamics of laser spot weld formation. Proceedings of the 1st Electronics Systemintegration Technology Conference, 2006. IEEE, pp. 387-391. ISBN 1 4244 0552 1 (doi:10.1109/ESTC.2006.280031)

packaging

Sinclair, Keith I., Goussetis, George, Desmulliez, Marc P.Y., Sangster, Alan J., Tilford, Tim, Bailey, Chris and Parrott, Kevin (2009) Polymer curing within an optimised open-ended microwave oven. In: European Microwave Week 2008, “Bridging Gaps”, Conference Proceedings,. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 17-20. ISBN 978-2-87487-006-4 (doi:10.1109/EUMC.2008.4751375)

parallel dedicated machines

Kelleler, H. and Strusevich, V.A. (2003) Scheduling problems for parallel dedicated machines under multiple resource constraints. Discrete Applied Mathematics, 133 (1-3). pp. 45-68. ISSN 0166-218X (doi:10.1016/S0166-218X(03)00433-5)

particle degradation

Deng, Tong, Farnish, Richard J. and Bradley, Michael S.A. (2008) Evaluation of particle degradation due to high-speed impacts in a pneumatic handling system. Particulate Science and Technology, 26 (5). pp. 438-450. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:10.1080/02726350802367522)

particulate solids

Abou-Chakra, Hadi, Baxter, John, Tuzun, Ugur, Chapelle, Pierre, Patel, Mayur, Bridle, Ian, Bradley, Michael S.A. and Reed, Alan R. (2004) Degradation toolkit for predicting the amount of degradation of particulate solids in lean phase pneumatic conveyors. In: International Conference for Particle Technology (PARTEC 2004), 16-18 March 2004, Nuremberg, Germany. (Unpublished)

Perception

Poliakoff, Ellen, O’Kane, Sophie, Carefoot, Olivia, Kyberd, J and Gowen, Emma (2018) Investigating the Uncanny Valley for prosthetic hands. Prosthetics and Orthotics International, 42 (1). pp. 21-27. ISSN 0309-3646 (doi:10.1177/039364617744083)

PHM

Sutharssan, T., Stoyanov, S., Bailey, C. and Rosunally, Y. (2012) Data analysis techniques for real-time prognostics and health management of semiconductor devices. In: Microelectronics and Packaging. Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ, USA, pp. 1-7. ISBN 978-1-4673-0694-2 (print)

PHYSICA

Croft, T.N., Pericleous, K.A., Bobadilla, M. and Gardin, P. (2002) Three-phase computations of the continuous casting process. In: Proceedings of the 4th European Continuous Casting Conference. IOM Communications Ltd, London, England, UK, pp. 545-554.

PHYSICA+

Bennett, C.R., Cross, M., Croft, T.N., Uhrie, J., Green, C. and Gebhardt, J. (2003) A comprehensive copper stockpile leach model: background and model formulation. In: Hydrometallurgy 2003. Proceedings of the Fifth International Conference. Honoring Professor Ian M. Ritchie. TMS (The Minerals, Metals & Materials Society), Pennsylvania, USA, pp. 315-328. ISBN 0873395549

pipe

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

pipeline

Umeadi, Bonny B.N. and Jones, K.G. (2008) The development of an intelligent sensor for the monitoring of pipeline system integrity. In: SPE Russian oil and gas technical conference and exhibition 2008 : 28-30 October 2008, Moscow, Russia. Society of Petroleum Engineers, New York, USA. ISBN 9781605607795 (doi:10.2118/115503-MS)

pipeline route

Schuster, T., Bradley, M.S.A. and Reed, Alan R. (1995) The dependence of power consumption of pneumatic conveying systems upon bulk material properties, pipeline bore and routing, and mode of flow. Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering, 209 (E1). pp. 69-75. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/PIME_PROC_1995_209_230_02)

pipeline systems

Mahmoodian, Mojtaba (2013) Reliability analysis and service life prediction of pipelines. PhD thesis, University of Greenwich.

pipelines

Hettiaratchi, Kaushika (2006) A comparison between the pressure gradients in vertical and horizontal pneumatic conveying, with an investigation into the effect of pipeline bore in vertical conveying. PhD thesis, University of Greenwich.

Umeadi, Boniface B.N. (2010) An investigation into the potential of advanced sensor technology to support the maintenance of pipeline distribution systems. PhD thesis, University of Greenwich.

pipes

Kessel, Stephen Ronald (1985) The interaction between rotary valves and pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

planar contraction

Phillips, T.N. and Williams, A.J. (2002) Comparison of creeping and inertial flow of an Oldroyd B fluid through planar and axisymmetric contractions. Journal of Non-Newtonian Fluid Mechanics, 108 (1-3). pp. 25-47. ISSN 0377-0257 (doi:10.1016/S0377-0257(02)00123-4)

plates

Strusevich, Nadezhda V., Pericleous, Koulis and Hughes, Michael (2002) Characterisation of weldpool shapes in the laser welding of thick plates. In: Mathematical Modelling of Weld Phenomena. Materials Modelling, 6 . Maney Publishing for the Institute of Materials, Minerals and Mining, London, England, UK, pp. 83-92. ISBN 9781902653563

pneumatic conveying

Hettiaratchi, Kaushika (2006) A comparison between the pressure gradients in vertical and horizontal pneumatic conveying, with an investigation into the effect of pipeline bore in vertical conveying. PhD thesis, University of Greenwich.

Pittman, Andrew Nigel (1990) Suction nozzle feeding mechanisms and their effect on the performance of vacuum pneumatic conveying systems. MPhil thesis, Thames Polytechnic.

pneumatic conveying pipelines

Bradley, M. S. A., Burnett, A. J. and Woodhead, S. R. (1995) Measurement of pressure profiles in pneumatic conveying pipelines. Instrumentation and Measurement Technology Conference, 1995. IMTC/95. Proceedings. Integrating Intelligent Instrumentation and Control., IEEE. Institute of Electrical and Electronics Engineers, New York, pp. 766-769. ISBN 978-0780326156 (doi:10.1109/IMTC.1995.515419)

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

Burnett, A. J. (1993) Wear in pneumatic conveying pipelines. Powder Handling and Processing, 15 (2). pp. 123-128. ISSN 0934-7348

pneumatic conveying systems

Jones, Mark G. (1988) The influence of bulk particulate properties on pneumatic conveying performance. PhD thesis, Thames Polytechnic.

pneumatic conveyors

Abou-Chakra, Hadi, Baxter, John, Tuzun, Ugur, Chapelle, Pierre, Patel, Mayur, Bridle, Ian, Bradley, Michael S.A. and Reed, Alan R. (2004) Degradation toolkit for predicting the amount of degradation of particulate solids in lean phase pneumatic conveyors. In: International Conference for Particle Technology (PARTEC 2004), 16-18 March 2004, Nuremberg, Germany. (Unpublished)

Deng, Tong, Farnish, Richard J. and Bradley, Michael S.A. (2008) Evaluation of particle degradation due to high-speed impacts in a pneumatic handling system. Particulate Science and Technology, 26 (5). pp. 438-450. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:10.1080/02726350802367522)

Hanson, R., Allsopp, D., Deng, T., Smith, D., Bradley, M.S.A., Hutchings, I.M. and Patel, M.K. (2002) A model to predict the life of pneumatic conveyor bends. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 216 (3). pp. 143-149. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/095440802320225284)

Hanson, Robert (2001) A model to predict the lifetime of pneumatic conveyor bends. PhD thesis, University of Greenwich.

Schuster, T., Bradley, M.S.A. and Reed, Alan R. (1995) The dependence of power consumption of pneumatic conveying systems upon bulk material properties, pipeline bore and routing, and mode of flow. Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering, 209 (E1). pp. 69-75. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/PIME_PROC_1995_209_230_02)

pneumatic machinery

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

Jones, Mark G. (1988) The influence of bulk particulate properties on pneumatic conveying performance. PhD thesis, Thames Polytechnic.

pneumatic systems

Kessel, Stephen Ronald (1985) The interaction between rotary valves and pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

pocket machining

Hinduja, S., Mansor, M.S.A. and Owodunni, O.O. (2010) Voronoi-diagram-based linking of contour-parallel tool paths for two-and-a-half-dimensional closed-pocket machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (9). pp. 1329-1350. ISSN 0954-4054 (Print), 2041-2975 (Online) (doi:10.1243/09544054JEM1596)

policy-based configuration

Anthony, Richard, Chen, DeJiu, Pelc, Mariusz, Persson, Magnus and Tӧrngren, Martin (2009) Context-aware adaptation in DySCAS. Electronic Communications of the EASST, 19. ISSN 1863-2122

polymer films

Yin, C.Y., Lu, H., Bailey, C. and Chan, Y.C. (2003) Experimental and modeling analysis of the reliability of the anisotropic conductive films. In: 2003 Proceedings 53rd Electronic Components & Technology Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 698-702. ISBN 0780377915 ISSN 0569-5503 (doi:10.1109/ECTC.2003.1216359)

polymers

Sinclair, Keith I., Goussetis, George, Desmulliez, Marc P.Y., Sangster, Alan J., Tilford, Tim, Bailey, Chris and Parrott, Kevin (2009) Polymer curing within an optimised open-ended microwave oven. In: European Microwave Week 2008, “Bridging Gaps”, Conference Proceedings,. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 17-20. ISBN 978-2-87487-006-4 (doi:10.1109/EUMC.2008.4751375)

polynomial algorithm

Potts, C.N., Strusevich, V.A. and Tautenhahn, T. (2001) Scheduling batches with simultaneous job processing for two-machine shop problems. Journal of Scheduling, 4 (1). pp. 25-51. ISSN 1094-6136 (Print), 1099-1425 (Online) (doi:10.1002/1099-1425(200101/02)4:1<25::AID-JOS58>3.0.CO;2-7)

Shakhlevich, Natalia V., Sotskov, Yuri N. and Werner, Frank (2000) Complexity of mixed shop scheduling problems: A survey. European Journal of Operational Research, 120. pp. 343-351. ISSN 0377-2217 (doi:10.1016/S0377-2217(99)00161-7)

polynomial-time algorithm

Gladky, A.A., Shafransky, Y.M. and Strusevich, V.A. (2004) Flow shop scheduling problems under machine–dependent precedence constraints. Journal of Combinatorial Optimization, 8 (1). pp. 13-28. ISSN 1382-6905 (Print), 1573-2886 (Online) (doi:10.1023/B:JOCO.0000021935.66577.09)

power electronics devices

Bailey, Chris, Lu, Hua and Yin, Chunyan (2010) Modelling reliability of power electronics packaging. In: Proceedings of the ASME InterPack Conference 2009, IPACK2009. American Society of Mechanical Engineers, New York, USA, pp. 215-220. ISBN 9780791843604 (doi:10.1115/InterPACK2009-89430)

power generation

Khan, Naushad Salim (2008) Handling characteristics of coal/biomass mixes: measurements and establishing benchmarks. PhD thesis, University of Greenwich.

precedence constraints

Gladky, A.A., Shafransky, Y.M. and Strusevich, V.A. (2004) Flow shop scheduling problems under machine–dependent precedence constraints. Journal of Combinatorial Optimization, 8 (1). pp. 13-28. ISSN 1382-6905 (Print), 1573-2886 (Online) (doi:10.1023/B:JOCO.0000021935.66577.09)

precision machining

Li, Yingguang, Liu, Changqing, Hao, Xiaozhong, Gao, James X. and Maropoulos, Paul G. (2015) Responsive fixture design using dynamic product inspection and monitoring technologies for the precision machining of large-scale aerospace parts. CIRP Annals - Manufacturing Technology, 64 (1). pp. 173-176. ISSN 0007-8506 (doi:10.1016/j.cirp.2015.04.025)

prediction models

Hanson, Robert (2001) A model to predict the lifetime of pneumatic conveyor bends. PhD thesis, University of Greenwich.

pressure vessels

Kessel, Stephen Ronald (1985) The interaction between rotary valves and pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

probability theory

Mahmoodian, Mojtaba (2013) Reliability analysis and service life prediction of pipelines. PhD thesis, University of Greenwich.

problem solving

Fei, Genyuan, Gao, James, Owodunni, Oladele and Tang, X. Q. (2009) A methodology for engineering design change management using modelling and problem solving techniques. In: Hinduja, Srichand and Li, Lin, (eds.) Proceedings of the 36th International MATADOR Conference. Springer, US, pp. 179-182. ISBN 978-1-84996-432-6_41 (doi:10.1007/978-1-84996-432-6_41)

process engineering

Owonikoko, Aminu (2012) Predicting storage vessel geometry requirements for discharge of extreme shape materials. MPhil thesis, University of Greenwich.

product design

Tang, Ying Kit (2012) A risk analysis methodology for micro/nano manufacturing. PhD thesis, University of Greenwich.

product knowledge analysis

Baxter, David, Rajkumar, Roy and Gao, James (2008) Design process knowledge reuse challenges and issues. Computer Aided Design and Applications, 5 (6). pp. 942-952. ISSN 1686-4360 (doi:10.3722/cadaps.2008.942-952)

product modelling

Fei, Genyuan, Gao, James, Owodunni, Oladele and Tang, X. Q. (2009) A methodology for engineering design change management using modelling and problem solving techniques. In: Hinduja, Srichand and Li, Lin, (eds.) Proceedings of the 36th International MATADOR Conference. Springer, US, pp. 179-182. ISBN 978-1-84996-432-6_41 (doi:10.1007/978-1-84996-432-6_41)

prognostics

Sutharssan, Thamo, Bailey, Chris, Stoyanov, Stoyan and Rosunally, Yasmine (2011) Prognostics and reliability assessment of light emitting diode packaging. In: Electronic Packaging Technology and High Density Packaging (ICEPT-HDP), 2011 12th International Conference on. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 1-7. ISBN 978-1-4577-1770-3 (print), 978-1-4577-1768-0 (eISBN) (doi:10.1109/ICEPT.2011.6066984)

prognostics health management

Sutharssan, T., Stoyanov, S., Bailey, C. and Rosunally, Y. (2012) Data analysis techniques for real-time prognostics and health management of semiconductor devices. In: Microelectronics and Packaging. Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ, USA, pp. 1-7. ISBN 978-1-4673-0694-2 (print)

Prosthetic design

Poliakoff, Ellen, O’Kane, Sophie, Carefoot, Olivia, Kyberd, J and Gowen, Emma (2018) Investigating the Uncanny Valley for prosthetic hands. Prosthetics and Orthotics International, 42 (1). pp. 21-27. ISSN 0309-3646 (doi:10.1177/039364617744083)

Prosthetics

Poliakoff, Ellen, O’Kane, Sophie, Carefoot, Olivia, Kyberd, J and Gowen, Emma (2018) Investigating the Uncanny Valley for prosthetic hands. Prosthetics and Orthotics International, 42 (1). pp. 21-27. ISSN 0309-3646 (doi:10.1177/039364617744083)

prototypes

Tang, Ying Kit (2012) A risk analysis methodology for micro/nano manufacturing. PhD thesis, University of Greenwich.

pumping machinery

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

pumps

Kessel, Stephen Ronald (1985) The interaction between rotary valves and pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

pure mathematics

Chow, Peter M-Y (1993) Control volume unstructured mesh procedure for convection-diffusion solidification processes. PhD thesis, University of Greenwich.

rapid prototyping

Sahatoo, Divesh, Chowdary, Boppana V., Ali, Fahraz F. and Bhatti, Rajinderpal (2008) Slicing issues in CAD translation to STL in rapid prototyping. Proceedings of The 2008 IAJC-IJME International Conference. International Association of Journals and Conferences/International Journal of Modern Engineering, California State University, Northridge. ISBN 9781606433799

real-time embedded systems

Anthony, Richard, Chen, DeJiu, Pelc, Mariusz, Persson, Magnus and Tӧrngren, Martin (2009) Context-aware adaptation in DySCAS. Electronic Communications of the EASST, 19. ISSN 1863-2122

real-time systems

Sparrow, R. D., Adekunle, Andrew, Berry, Robert and Farnish, Richard (2015) Simulating and modelling the impact of secure communication latency for closed loop control. In: Internet Technologies and Applications (ITA), 2015. IEEE, Wrexham, UK, pp. 138-143. ISSN 9781479980369 (doi:10.1109/ITechA.2015.7317384)

reflow soldering

Yin, C.Y., Lu, H., Bailey, C. and Chan, Y.C. (2004) Effects of reflow process on the reliability of flip chip on flex interconnections using anisotropic conductive adhesives. In: 2004 International IEEE Conference on Asian Green Electronics (AGEC) [Proceedings]. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 240-245. ISBN 0-7803-8203-X (doi:10.1109/AGEC.2004.1290912)

Yin, Chunyan, Lu, Hua, Bailey, Chris and Chan, Yan-Cheong (2004) Effects of solder reflow on the reliability of flip-chip on flex interconnections using anisotropic conductive adhesives. IEEE Transactions on Electronics Packaging Manufacturing, 27 (4). pp. 254-259. ISSN 1521-334X (doi:10.1109/TEPM.2004.843152)

relational structures

Woon, Fei Ling, Knight, Brian, Petridis, Miltos and Ward, Graham (2002) A case based model to assist in the design process in the manufacture of furniture products. Expert Update - The Specialist Group on Artificial intelligence, 5 (2). pp. 37-43. ISSN 1465-4091

reliability

Lu, Hua, Bailey, C. and Cross, M. (2000) Reliability analysis of flip chip designs via computer simulation. Journal of Electronic Packaging, 122 (3). pp. 214-219. ISSN 1528-9044 (Print), 1043-7398 (Online) (doi:10.1115/1.1286122)

Sutharssan, Thamo, Bailey, Chris, Stoyanov, Stoyan and Rosunally, Yasmine (2011) Prognostics and reliability assessment of light emitting diode packaging. In: Electronic Packaging Technology and High Density Packaging (ICEPT-HDP), 2011 12th International Conference on. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 1-7. ISBN 978-1-4577-1770-3 (print), 978-1-4577-1768-0 (eISBN) (doi:10.1109/ICEPT.2011.6066984)

reliable electronic packaging

Stoyanov, S. and Bailey, C. (2003) Optimization and finite element analysis for reliable electronic packaging. In: Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-electronics and Micro-systems. Proceedings of EuroSimE 2003. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 391-399. ISBN 0780370546

remaining life

Bailey, Chris, Lu, Hua and Yin, Chunyan (2010) Modelling reliability of power electronics packaging. In: Proceedings of the ASME InterPack Conference 2009, IPACK2009. American Society of Mechanical Engineers, New York, USA, pp. 215-220. ISBN 9780791843604 (doi:10.1115/InterPACK2009-89430)

report

Umeadi, Bonny B.N. and Jones, K.G. (2008) The development of an intelligent sensor for the monitoring of pipeline system integrity. In: SPE Russian oil and gas technical conference and exhibition 2008 : 28-30 October 2008, Moscow, Russia. Society of Petroleum Engineers, New York, USA. ISBN 9781605607795 (doi:10.2118/115503-MS)

resource constraints

Kelleler, H. and Strusevich, V.A. (2003) Scheduling problems for parallel dedicated machines under multiple resource constraints. Discrete Applied Mathematics, 133 (1-3). pp. 45-68. ISSN 0166-218X (doi:10.1016/S0166-218X(03)00433-5)

rheology

Mallik, Sabuj, Chan, Erica Hiu Laam and Ekere, Ndy (2012) Nonlinear Viscoelastic Characteristics of Sn-Ag-Cu Solder Pastes Used in Electronics Assembly Applications. Journal of Materials Engineering and Performance, 22 (4). pp. 1186-1193. ISSN 1059-9495 (Print), 1544-1024 (Online) (doi:10.1007/s11665-012-0360-7)

safety measures

van Manen, P. (1984) The dynamic behaviour of rail vehicles operating at high speeds for manriding in British coal mines. PhD thesis, Thames Polytechnic.

scanning electron microscopy (SEM)

Kumar, Santosh, Mallik, Sabuj, Ekere, Ndy and Jung, Jaepil (2013) Stencil Printing Behavior of Lead-Free Sn-3Ag-0.5Cu Solder Paste for Wafer Level Bumping for Sub-100 μm Size Solder Bumps. Metals and Materials International, 19 (5). pp. 1083-1090. ISSN 1598-9623 (Print), 2005-4149 (Online) (doi:10.1007/s12540-013-5025-z)

scheduling

Kelleler, H. and Strusevich, V.A. (2003) Scheduling problems for parallel dedicated machines under multiple resource constraints. Discrete Applied Mathematics, 133 (1-3). pp. 45-68. ISSN 0166-218X (doi:10.1016/S0166-218X(03)00433-5)

Potts, C.N., Strusevich, V.A. and Tautenhahn, T. (2001) Scheduling batches with simultaneous job processing for two-machine shop problems. Journal of Scheduling, 4 (1). pp. 25-51. ISSN 1094-6136 (Print), 1099-1425 (Online) (doi:10.1002/1099-1425(200101/02)4:1<25::AID-JOS58>3.0.CO;2-7)

scheduling applications

Chen, Li Choo (2007) Optimisation of rule-based testing for scheduling within a distributed computing environment. PhD thesis, University of Greenwich.

security

Sparrow, R.D., Adekunle, A.A., Berry, R.J. and Farnish, R.J. (2015) Balancing throughput and latency for an aerial robot over a wireless secure communication link. In: 2015 IEEE 2nd International Conference on Cybernetics (CYBCONF). IEEE, pp. 184-189. ISBN 978-1-4799-8320-9 (doi:10.1109/CYBConf.2015.7175929)

security constructs

Sparrow, R. D., Adekunle, Andrew, Berry, Robert and Farnish, Richard (2015) Simulating and modelling the impact of secure communication latency for closed loop control. In: Internet Technologies and Applications (ITA), 2015. IEEE, Wrexham, UK, pp. 138-143. ISSN 9781479980369 (doi:10.1109/ITechA.2015.7317384)

segregation

Christakis, Nicholas, Chapelle, Pierre, Patel, Mayur K. and Cross, Mark (2006) On the continuum modelling of segregation of granular mixtures during hopper emptying in core flow mode. In: European Conference on Computational Fluid Dynamics ECCOMAS CFD 2006 Proceedings. TU Delft, The Netherlands, The Netherlands. ISBN 9090209700

semi-Lagrangian

Phillips, T.N. and Williams, A.J. (2002) Comparison of creeping and inertial flow of an Oldroyd B fluid through planar and axisymmetric contractions. Journal of Non-Newtonian Fluid Mechanics, 108 (1-3). pp. 25-47. ISSN 0377-0257 (doi:10.1016/S0377-0257(02)00123-4)

semi-Lagrangian approach

Phillips, T.N. and Williams, A.J. (2000) Semi-Lagrangian finite volume methods for viscoelastic flow problems. In: The Mathematics of Finite Elements and Applications X (MAFELAP 19). Elsevier Science Ltd., Kidlington, Oxford, pp. 335-344. ISBN 0080435688

semiconductor device modeling

Yin, C.Y., Lu, H., Bailey, C. and Chan, Y.C. (2003) Experimental and modeling analysis of the reliability of the anisotropic conductive films. In: 2003 Proceedings 53rd Electronic Components & Technology Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 698-702. ISBN 0780377915 ISSN 0569-5503 (doi:10.1109/ECTC.2003.1216359)

semiconductor technology

Bailey, Chris, Lu, Hua and Yin, Chunyan (2010) Modelling reliability of power electronics packaging. In: Proceedings of the ASME InterPack Conference 2009, IPACK2009. American Society of Mechanical Engineers, New York, USA, pp. 215-220. ISBN 9780791843604 (doi:10.1115/InterPACK2009-89430)

similarity measure

Woon, Fei Ling, Knight, Brian, Petridis, Miltos and Ward, Graham (2002) A case based model to assist in the design process in the manufacture of furniture products. Expert Update - The Specialist Group on Artificial intelligence, 5 (2). pp. 37-43. ISSN 1465-4091

simulation

Arokiam, A. C., Barashev, A. V., Bacon, D. J. and Osetsky, Y. N. (2007) Atomic-scale computer simulation study of the interaction of Cu-rich precipitates with irradiation-produced defects in α-Fe. Philosophical Magazine, 87 (6). pp. 925-943. ISSN 1478–6435 (Print), 1478–6443 (Online) (doi:10.1080/14786430601003908)

small and medium size enterprises

Pillai, Sreejit (2015) A decision support system for ERP projects in make -to-order manufacturing SMEs. PhD thesis, University of Greenwich.

SMARTFIRE

Ewer, J.A.C., Galea, E.R., Patel, M.K. and Knight, B. (2000) The development of group solvers in the SMARTFIRE fire field model. In: ACME '2000 The 8th Annual Conference of the Association for Computational Mechanics in Engineering. Extended Abstracts. University of Greenwich, Greenwich, London, UK, pp. 54-57. ISBN 1861661509

SMEs

Pillai, Sreejit, Arokiam, Alan, Bhatti, Raj and Collins, T. (2011) Make to order manufacturing and operational management strategies – a case study at Priorclave Ltd. In: 18th International Annual EurOMA Conference: Exploring Interfaces, 3-6 Jul 2011, Cambridge, UK. (Unpublished)

software systems

Chen, Li Choo (2007) Optimisation of rule-based testing for scheduling within a distributed computing environment. PhD thesis, University of Greenwich.

solder joints

Bailey, Chris, Lu, Hua and Yin, Chunyan (2010) Modelling reliability of power electronics packaging. In: Proceedings of the ASME InterPack Conference 2009, IPACK2009. American Society of Mechanical Engineers, New York, USA, pp. 215-220. ISBN 9780791843604 (doi:10.1115/InterPACK2009-89430)

Lu, Hua, Bailey, C. and Cross, M. (2000) Reliability analysis of flip chip designs via computer simulation. Journal of Electronic Packaging, 122 (3). pp. 214-219. ISSN 1528-9044 (Print), 1043-7398 (Online) (doi:10.1115/1.1286122)

Ridout, Stephen, Bailey, Christopher, Dusek, Milos and Hunt, C (2007) Constitutive modeling of kinematic-hardening and damage in solder joints. Proceedings of the 1st Electronics Systemintegration Technology Conference, 2006. IEEE, pp. 927-933. ISBN 1-4244-0552-1 (doi:10.1109/ESTC.2006.280122)

solder paste

Mallik, Sabuj, Chan, Erica Hiu Laam and Ekere, Ndy (2012) Nonlinear Viscoelastic Characteristics of Sn-Ag-Cu Solder Pastes Used in Electronics Assembly Applications. Journal of Materials Engineering and Performance, 22 (4). pp. 1186-1193. ISSN 1059-9495 (Print), 1544-1024 (Online) (doi:10.1007/s11665-012-0360-7)

soldering

Kumar, Santosh, Mallik, Sabuj, Ekere, Ndy and Jung, Jaepil (2013) Stencil Printing Behavior of Lead-Free Sn-3Ag-0.5Cu Solder Paste for Wafer Level Bumping for Sub-100 μm Size Solder Bumps. Metals and Materials International, 19 (5). pp. 1083-1090. ISSN 1598-9623 (Print), 2005-4149 (Online) (doi:10.1007/s12540-013-5025-z)

solders

Lu, Hua, Bailey, C. and Cross, M. (2000) Reliability analysis of flip chip designs via computer simulation. Journal of Electronic Packaging, 122 (3). pp. 214-219. ISSN 1528-9044 (Print), 1043-7398 (Online) (doi:10.1115/1.1286122)

solid mass

Woodcock, C. R. (1978) The flow of particulate bulk solids in an air-assisted gravity conveyor. PhD thesis, Thames Polytechnic.

solid mechanics

Fallah, N.A., Bailey, C. and Cross, M. (2000) CFD approach for solid mechanics analysis. In: European Congress on Computational Methods in Applied Sciences and Engineering. ECCOMAS 2000. [Proceedings]. ECCOMAS.

solid particle erosion

Li, Ji (2007) A study of the solid particle erosion performance of automative and other novel low carbon steels. PhD thesis, University of Greenwich.

solid particle impact

Burnett, Anthony John (1996) The use of laboratory erosion tests for the prediction of wear in pneumatic conveyor bends. PhD thesis, University of Greenwich.

solidification

Chow, Peter M-Y (1993) Control volume unstructured mesh procedure for convection-diffusion solidification processes. PhD thesis, University of Greenwich.

solidification phase change

Williams, A.J., Croft, T.N. and Cross, M. (2003) Modeling of ingot development during the start-up phase of direct chill casting. Metallurgical and Materials Transactions B, 34 (5). pp. 727-734. ISSN 1073-5615 (Print), 1543-1916 (Online) (doi:10.1007/s11663-003-0042-9)

solidification processes

Mileman, T.J., Knight, B., Cowell, D.F. and Preddy, K.L. (1998) Cast-aid: a decision support system for designing castings. In: 8th International conference on Modeling of Casting and Welding Processes. Minerals, Metals & Materials Society, Warrendale, PA, USA, pp. 1087-1094. ISBN 0873394070

SPE

Li, Ji (2007) A study of the solid particle erosion performance of automative and other novel low carbon steels. PhD thesis, University of Greenwich.

spectrum sensing

Arshad, Kamran and Moessner, Klaus (2013) Robust spectrum sensing based on statistical tests. IET Communications, 7 (9). pp. 808-817. ISSN 1751-8628 (doi:10.1049/iet-com.2012.0499)

stacked microstrip antennas

Callaghan, Peter and Batchelor, John C. (2008) Multiband low-profile antenna for remote antenna unit picocell applications. IEEE Transactions on Antennas and Propagation, 56 (8). pp. 2475-2480. ISSN 0018-926X (doi:10.1109/TAP.2008.927558)

Stationary welding

Hughes, Michael, Taylor, Gareth A. and Pericleous, Koulis (2000) Thermocapillary and magnetohydrodynamic effects in modelling the thermodynamics of stationary welding processes. Phoenics Journal of Computational Fluid Dynamics and Its Applications, 13 (1). pp. 99-113. ISSN 0969-8248

STEP-NC

Owodunni, Oladele, Hinduja, Srichand, Mekid, Samir and Zia, Ahmad (2007) An investigation of optimum cutting conditions for STEP-NC turned features. In: Innovative Production Machines and Systems Conference 2007 (IPROMS), 2-13 July 2007, http://conference.iproms.org/ [Virtual Conference].

STL

Sahatoo, Divesh, Chowdary, Boppana V., Ali, Fahraz F. and Bhatti, Rajinderpal (2008) Slicing issues in CAD translation to STL in rapid prototyping. Proceedings of The 2008 IAJC-IJME International Conference. International Association of Journals and Conferences/International Journal of Modern Engineering, California State University, Northridge. ISBN 9781606433799

stress

Yin, C.Y., Lu, H., Bailey, C. and Chan, Y.C. (2003) Experimental and modeling analysis of the reliability of the anisotropic conductive films. In: 2003 Proceedings 53rd Electronic Components & Technology Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 698-702. ISBN 0780377915 ISSN 0569-5503 (doi:10.1109/ECTC.2003.1216359)

stress analysis

Slone, Avril, Fallah, Nosrat, Bailey, Christopher and Cross, Mark (2002) A finite volume approach to geometrically non-linear stress analysis. In: Finite volumes for complex applications III: problems and perspectives. Hermes Penton Science, London, UK, pp. 663-670. ISBN 9781903996348

stress singularity

Chen, Hua-Peng (2008) Singular stresses at the tip of a crack terminating at frictional interface of fibre reinforced composites. In: Sixteenth UK Conference of the Association of Computational Mechanics in Engineering (ACME UK), 1-2 Apr 2008, Newcastle upon Tyne, UK. (Unpublished)

suction nozzles

Pittman, Andrew Nigel (1990) Suction nozzle feeding mechanisms and their effect on the performance of vacuum pneumatic conveying systems. MPhil thesis, Thames Polytechnic.

surface emitting lasers

Gwyer, D., Misselbrook, P., Bailey, C., Conway, P.P. and Williams, K. (2004) Polymer waveguide and VCSEL array multi-physics modelling for OECB based optical backplanes [opto-electrical circuit boards]. In: Proceedings of the 5th International Conference on Thermal and Mechanical Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2004. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 399-406. ISBN 0780384202 (doi:10.1109/ESIME.2004.1304070)

Gwyer, D., Misselbrook, P., Philpott, D., Bailey, C., Conway, P.P. and Williams, K. (2004) Thermal, mechanical and optical modelling of VCSEL packaging. In: The Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena In Electronic Systems (ITHERM 2004) [Proceedings]. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 405-410. ISBN 0780383575 ISSN 1089-9870 (doi:10.1109/ITHERM.2004.1318311)

surface morphology

Xu, Sha, Chan, Yan Cheong, Zhu, Xiaoxin, Lu, Hua and Bailey, Chris (2014) Effective method to disperse and incorporate carbon nanotubes in electroless Ni-P deposits. In: 2014 IEEE 64th Electronic Components and Technology Conference (ECTC) Proceedings. Curran Associates, Stoughton, WI, USA, pp. 1342-1347. ISBN 9781479924080 (doi:10.1109/ECTC.2014.6897466)

surface topography

Xu, Sha, Chan, Yan Cheong, Zhu, Xiaoxin, Lu, Hua and Bailey, Chris (2014) Effective method to disperse and incorporate carbon nanotubes in electroless Ni-P deposits. In: 2014 IEEE 64th Electronic Components and Technology Conference (ECTC) Proceedings. Curran Associates, Stoughton, WI, USA, pp. 1342-1347. ISBN 9781479924080 (doi:10.1109/ECTC.2014.6897466)

surface treatment

Xu, Sha, Chan, Yan Cheong, Zhu, Xiaoxin, Lu, Hua and Bailey, Chris (2014) Effective method to disperse and incorporate carbon nanotubes in electroless Ni-P deposits. In: 2014 IEEE 64th Electronic Components and Technology Conference (ECTC) Proceedings. Curran Associates, Stoughton, WI, USA, pp. 1342-1347. ISBN 9781479924080 (doi:10.1109/ECTC.2014.6897466)

suspension

Mallik, Sabuj, Chan, Erica Hiu Laam and Ekere, Ndy (2012) Nonlinear Viscoelastic Characteristics of Sn-Ag-Cu Solder Pastes Used in Electronics Assembly Applications. Journal of Materials Engineering and Performance, 22 (4). pp. 1186-1193. ISSN 1059-9495 (Print), 1544-1024 (Online) (doi:10.1007/s11665-012-0360-7)

Sustainability of manufacturing

Zhang, Taoyuan (2015) Sustainability consideration in machining of 2½d milled features. PhD thesis, University of Greenwich.

Sustainability performance

Zhang, Taoyuan (2015) Sustainability consideration in machining of 2½d milled features. PhD thesis, University of Greenwich.

sustainable energy

Owonikoko, Aminu (2012) Predicting storage vessel geometry requirements for discharge of extreme shape materials. MPhil thesis, University of Greenwich.

sustainable machining operation

Owodunni, O.O., Zhang, T. and Gao, J. (2013) Energy consideration in machining operations - towards explanatory models for optimisation results. In: 11th Global Conference on Sustainable Manufacturing : Proceedings. Innovative Solutions. Universitätsverlag der TU Berlin, Berlin, Germany, pp. 153-158. ISBN 978-3-7983-2609-5

SysML

Fei, Genyuan, Gao, James, Owodunni, Oladele and Tang, X. Q. (2009) A methodology for engineering design change management using modelling and problem solving techniques. In: Hinduja, Srichand and Li, Lin, (eds.) Proceedings of the 36th International MATADOR Conference. Springer, US, pp. 179-182. ISBN 978-1-84996-432-6_41 (doi:10.1007/978-1-84996-432-6_41)

telecommunications

Mileman, Tony, Knight, Brian, Petridis, Miltos, Preddy, Keith and Mejasson, Patrick (2000) Maintenance of a case-base for the retrieval of rotationally symmetric shapes for the design of metal castings. In: Blanzieri, Enrico and Portinale, Luigi, (eds.) Advances in Case-Based Reasoning: 5th European Workshop, EWCBR 2000 Trento, Italy, September 6–9, 2000 Proceedings. Lecture Notes in Computer Science: Lecture Notes in Artificial Intelligence (1898). Springer Berlin Heidelberg, Berlin, Heidelberg, Germany, pp. 418-430. ISBN 9783540679332 ISSN 0302-9743 (doi:10.1007/3-540-44527-7_36)

temperature

Yin, C.Y., Lu, H., Bailey, C. and Chan, Y.C. (2003) Experimental and modeling analysis of the reliability of the anisotropic conductive films. In: 2003 Proceedings 53rd Electronic Components & Technology Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 698-702. ISBN 0780377915 ISSN 0569-5503 (doi:10.1109/ECTC.2003.1216359)

testing

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

thermal expansion

Gwyer, D., Misselbrook, P., Philpott, D., Bailey, C., Conway, P.P. and Williams, K. (2004) Thermal, mechanical and optical modelling of VCSEL packaging. In: The Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena In Electronic Systems (ITHERM 2004) [Proceedings]. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 405-410. ISBN 0780383575 ISSN 1089-9870 (doi:10.1109/ITHERM.2004.1318311)

Yin, Chunyan, Lu, Hua, Bailey, Chris and Chan, Yan-Cheong (2004) Effects of solder reflow on the reliability of flip-chip on flex interconnections using anisotropic conductive adhesives. IEEE Transactions on Electronics Packaging Manufacturing, 27 (4). pp. 254-259. ISSN 1521-334X (doi:10.1109/TEPM.2004.843152)

thermal management

Bailey, Chris, Lu, Hua and Yin, Chunyan (2010) Modelling reliability of power electronics packaging. In: Proceedings of the ASME InterPack Conference 2009, IPACK2009. American Society of Mechanical Engineers, New York, USA, pp. 215-220. ISBN 9780791843604 (doi:10.1115/InterPACK2009-89430)

thermo-mechanical behaviors

Bailey, Chris, Lu, Hua and Yin, Chunyan (2010) Modelling reliability of power electronics packaging. In: Proceedings of the ASME InterPack Conference 2009, IPACK2009. American Society of Mechanical Engineers, New York, USA, pp. 215-220. ISBN 9780791843604 (doi:10.1115/InterPACK2009-89430)

Thermocapillary flows

Hughes, Michael, Taylor, Gareth A. and Pericleous, Koulis (2000) Thermocapillary and magnetohydrodynamic effects in modelling the thermodynamics of stationary welding processes. Phoenics Journal of Computational Fluid Dynamics and Its Applications, 13 (1). pp. 99-113. ISSN 0969-8248

thermoelectric MHD

Kao, A. and Pericleous, K. (2012) A multi scale method for thermo-electric MHD in dendritic solidification. Journal of Iron and Steel International, 19 (S1-1). pp. 317-321. ISSN 1006-706X

thermomechanical analysis

Williams, A.J., Croft, T.N. and Cross, M. (2003) Modeling of ingot development during the start-up phase of direct chill casting. Metallurgical and Materials Transactions B, 34 (5). pp. 727-734. ISSN 1073-5615 (Print), 1543-1916 (Online) (doi:10.1007/s11663-003-0042-9)

throughput

Sparrow, R.D., Adekunle, A.A., Berry, R.J. and Farnish, R.J. (2015) Balancing throughput and latency for an aerial robot over a wireless secure communication link. In: 2015 IEEE 2nd International Conference on Cybernetics (CYBCONF). IEEE, pp. 184-189. ISBN 978-1-4799-8320-9 (doi:10.1109/CYBConf.2015.7175929)

titanium aluminide

Pericleous, Koulis A., Djambazov, G. and Wang, Hong (2006) Numerical modelling of the low-superheat casting of thin-section components. In: Gandin, Charles-André and Bellet, Michel, (eds.) Modeling of casting, welding, and advanced solidification XI : proceedings from the Eleventh International Conference on Modelling of Casting, Welding and Advanced Solidification Processes. TMS - The Minerals Metals and Materials Society, Warrendale, Pennsylvania, USA. ISBN 9780873396295

tool path linking

Hinduja, S., Mansor, M.S.A. and Owodunni, O.O. (2010) Voronoi-diagram-based linking of contour-parallel tool paths for two-and-a-half-dimensional closed-pocket machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (9). pp. 1329-1350. ISSN 0954-4054 (Print), 2041-2975 (Online) (doi:10.1243/09544054JEM1596)

topology optimisation

Javadi, Akbar, Faramarzi, Asaad, Farmani, Raziyeh and Evans, Ken (2009) Design of microstructure and topological optimisation of auxetic materials. In: Proceedings of the 17th UK Conference on Computational Mechanics. Spencer Institute of Theoretical and Computational Mechanics, Unversity of Nottingham, Nottingham, UK, pp. 251-260. ISBN 9780853582557

transient structural dynamics

Slone, A.K., Cross, M., Pericleous, K.A. and Bailey, C. (2001) A finite volume unstructured mesh approach to dynamic fluid-structure interaction: an assessment of the challenge of flutter analysis. In: Trends in Computational Structural Mechanics. International Center for Numerical Methods in Engineering (CIMNE), Barcelona, Spain, pp. 741-750. ISBN 8489925771

Slone, A.K., Pericleous, K., Bailey, C. and Cross, M. (2001) Dynamic fluid-structure interaction using finite volume unstructured mesh procedures. In: European Conference on Computational Fluid Dynamics ECCOMAS CFD 2006 Proceedings. ECCOMAS. ISBN 0905091124

transport systems

Bailey, Chris, Lu, Hua and Yin, Chunyan (2010) Modelling reliability of power electronics packaging. In: Proceedings of the ASME InterPack Conference 2009, IPACK2009. American Society of Mechanical Engineers, New York, USA, pp. 215-220. ISBN 9780791843604 (doi:10.1115/InterPACK2009-89430)

tribology

Burnett, Anthony John (1996) The use of laboratory erosion tests for the prediction of wear in pneumatic conveyor bends. PhD thesis, University of Greenwich.

Triz

Fei, Genyuan, Gao, James, Owodunni, Oladele and Tang, X. Q. (2009) A methodology for engineering design change management using modelling and problem solving techniques. In: Hinduja, Srichand and Li, Lin, (eds.) Proceedings of the 36th International MATADOR Conference. Springer, US, pp. 179-182. ISBN 978-1-84996-432-6_41 (doi:10.1007/978-1-84996-432-6_41)

tubing

Kessel, Stephen Ronald (1985) The interaction between rotary valves and pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

tubing & valves

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

turbulent flow

Burnett, A. J. (1993) Wear in pneumatic conveying pipelines. Powder Handling and Processing, 15 (2). pp. 123-128. ISSN 0934-7348

turbulent fluid flow

Bojarevics, Valdis and Pericleous, Koulis (2003) Modelling electromagnetically levitated liquid droplet oscillations. ISIJ International, 43 (6). pp. 890-898. ISSN 0915-1559 (Print), 1347-5460 (Online) (doi:10.2355/isijinternational.43.890)

Croft, T.N., Pericleous, K.A., Bobadilla, M. and Gardin, P. (2002) Three-phase computations of the continuous casting process. In: Proceedings of the 4th European Continuous Casting Conference. IOM Communications Ltd, London, England, UK, pp. 545-554.

Hughes, Michael, Pericleous, Koulis and Strusevitch, Nadia (2002) Modelling the fluid dynamics and coupled phenomena in arc weld pools. In: Mathematical Modelling of Weld Phenomena. Materials Modelling, 6 . Maney Publishing for the Institute of Materials, Minerals and Mining, London, England, UK, pp. 63-81. ISBN 9781902653563

turning operations

Owodunni, Oladele, Hinduja, Srichand, Mekid, Samir and Zia, Ahmad (2007) An investigation of optimum cutting conditions for STEP-NC turned features. In: Innovative Production Machines and Systems Conference 2007 (IPROMS), 2-13 July 2007, http://conference.iproms.org/ [Virtual Conference].

two phase flow

Burnett, A. J. (1993) Wear in pneumatic conveying pipelines. Powder Handling and Processing, 15 (2). pp. 123-128. ISSN 0934-7348

Burnett, Anthony John (1996) The use of laboratory erosion tests for the prediction of wear in pneumatic conveyor bends. PhD thesis, University of Greenwich.

Uncanny valley

Poliakoff, Ellen, O’Kane, Sophie, Carefoot, Olivia, Kyberd, J and Gowen, Emma (2018) Investigating the Uncanny Valley for prosthetic hands. Prosthetics and Orthotics International, 42 (1). pp. 21-27. ISSN 0309-3646 (doi:10.1177/039364617744083)

unmanned aerial vehicles

Sparrow, R.D., Adekunle, A.A., Berry, R.J. and Farnish, R.J. (2015) Balancing throughput and latency for an aerial robot over a wireless secure communication link. In: 2015 IEEE 2nd International Conference on Cybernetics (CYBCONF). IEEE, pp. 184-189. ISBN 978-1-4799-8320-9 (doi:10.1109/CYBConf.2015.7175929)

valves

Kessel, Stephen Ronald (1985) The interaction between rotary valves and pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

vectors

Chow, Peter M-Y (1993) Control volume unstructured mesh procedure for convection-diffusion solidification processes. PhD thesis, University of Greenwich.

vehicles

van Manen, P. (1984) The dynamic behaviour of rail vehicles operating at high speeds for manriding in British coal mines. PhD thesis, Thames Polytechnic.

vertex-based - cell-centred

McBride, Diane, Croft, Nick and Cross, Mark (2003) Combined vertex-based - cell-centred finite volume method for flows in complex geometries. In: The 3rd International Conference on CFD in the Minerals and Process Industries [Proceedings]. CSIRO Publishing, Collingwood, Victoria, Australia, pp. 351-356. ISBN 978064309038X

vibration

Umeadi, Bonny B.N. and Jones, K.G. (2008) The development of an intelligent sensor for the monitoring of pipeline system integrity. In: SPE Russian oil and gas technical conference and exhibition 2008 : 28-30 October 2008, Moscow, Russia. Society of Petroleum Engineers, New York, USA. ISBN 9781605607795 (doi:10.2118/115503-MS)

virtual manufacturing

McManus, K., Cross, M., Walshaw, C., Johnson, S., Bailey, C., Pericleous, K., Slone, A. and Chow, P. (2000) Virtual manufacturing and design in the real world - implementation and scalability on HPPC systems. In: Parallel Computational Fluid Dynamics 1999: Towards Teraflops, Optimization and Novel Formulations. North-Holland, Amsterdam, The Netherlands, pp. 47-56. ISBN 978044482851 (doi:10.1016/B978-044482851-4.50009-8)

Virtual Power Plants

Skarvelis-Kazakos, Spyros, Rikos, Evangelos, Kolentini, Efstathia, Cipcigan, Liana M. and Jenkins, Nick (2013) Implementing agent-based emissions trading for controlling Virtual Power Plant emissions. Electric Power Systems Research, 102. ISSN 0378-7796 (doi:10.1016/j.epsr.2013.04.004)

viscoelastic flow

Phillips, T.N. and Williams, A.J. (2002) Comparison of creeping and inertial flow of an Oldroyd B fluid through planar and axisymmetric contractions. Journal of Non-Newtonian Fluid Mechanics, 108 (1-3). pp. 25-47. ISSN 0377-0257 (doi:10.1016/S0377-0257(02)00123-4)

viscoelastic methods

Phillips, T.N. and Williams, A.J. (2000) Semi-Lagrangian finite volume methods for viscoelastic flow problems. In: The Mathematics of Finite Elements and Applications X (MAFELAP 19). Elsevier Science Ltd., Kidlington, Oxford, pp. 335-344. ISBN 0080435688

viscoelasticity

Mallik, Sabuj, Chan, Erica Hiu Laam and Ekere, Ndy (2012) Nonlinear Viscoelastic Characteristics of Sn-Ag-Cu Solder Pastes Used in Electronics Assembly Applications. Journal of Materials Engineering and Performance, 22 (4). pp. 1186-1193. ISSN 1059-9495 (Print), 1544-1024 (Online) (doi:10.1007/s11665-012-0360-7)

wave soldering

Stoyanov, S., Bailey, C., Saxena, N. and Adams, S. (2004) Modelling the wave soldering process. In: Proceedings of the 6th International Conference on Electronics Materials and Packaging (EMAP 2004). Institute of Electrical and Electronics Engineers, pp. 553-558. ISBN 983251486X

waveguide components

Sinclair, Keith I., Goussetis, George, Desmulliez, Marc P.Y., Sangster, Alan J., Tilford, Tim, Bailey, Chris and Parrott, Kevin (2009) Polymer curing within an optimised open-ended microwave oven. In: European Microwave Week 2008, “Bridging Gaps”, Conference Proceedings,. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 17-20. ISBN 978-2-87487-006-4 (doi:10.1109/EUMC.2008.4751375)

wear of materials

Burnett, A. J. (1993) Wear in pneumatic conveying pipelines. Powder Handling and Processing, 15 (2). pp. 123-128. ISSN 0934-7348

wear rig

Burnett, A. J. (1993) Wear in pneumatic conveying pipelines. Powder Handling and Processing, 15 (2). pp. 123-128. ISSN 0934-7348

Welding

Hughes, Michael, Taylor, Gareth A. and Pericleous, Koulis (2000) Thermocapillary and magnetohydrodynamic effects in modelling the thermodynamics of stationary welding processes. Phoenics Journal of Computational Fluid Dynamics and Its Applications, 13 (1). pp. 99-113. ISSN 0969-8248

welding arc

Hughes, Michael, Pericleous, Koulis and Strusevitch, Nadia (2002) Modelling the fluid dynamics and coupled phenomena in arc weld pools. In: Mathematical Modelling of Weld Phenomena. Materials Modelling, 6 . Maney Publishing for the Institute of Materials, Minerals and Mining, London, England, UK, pp. 63-81. ISBN 9781902653563

welding processes

Mileman, T.J., Knight, B., Cowell, D.F. and Preddy, K.L. (1998) Cast-aid: a decision support system for designing castings. In: 8th International conference on Modeling of Casting and Welding Processes. Minerals, Metals & Materials Society, Warrendale, PA, USA, pp. 1087-1094. ISBN 0873394070

wide area

Bailey, Chris, Lu, Hua and Yin, Chunyan (2010) Modelling reliability of power electronics packaging. In: Proceedings of the ASME InterPack Conference 2009, IPACK2009. American Society of Mechanical Engineers, New York, USA, pp. 215-220. ISBN 9780791843604 (doi:10.1115/InterPACK2009-89430)

wireless

Sparrow, R.D., Adekunle, A.A., Berry, R.J. and Farnish, R.J. (2015) Balancing throughput and latency for an aerial robot over a wireless secure communication link. In: 2015 IEEE 2nd International Conference on Cybernetics (CYBCONF). IEEE, pp. 184-189. ISBN 978-1-4799-8320-9 (doi:10.1109/CYBConf.2015.7175929)

wireless network systems

Tavakoli Dehkordi, Anousheh (2015) Optimisation and algorithms in wireless networks for mission critical applications. PhD thesis, University of Greenwich.

Wireless Sensor Networks

Sparrow, R. D., Adekunle, Andrew, Berry, Robert and Farnish, Richard (2015) Study of two security constructs on throughput for wireless sensor multi-hop networks. In: 38th International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO), 2015, 25-29th May, Opatija. (doi:10.1109/MIPRO.2015.7160476)

wireless-sensors

Umeadi, Bonny B.N. and Jones, K.G. (2008) The development of an intelligent sensor for the monitoring of pipeline system integrity. In: SPE Russian oil and gas technical conference and exhibition 2008 : 28-30 October 2008, Moscow, Russia. Society of Petroleum Engineers, New York, USA. ISBN 9781605607795 (doi:10.2118/115503-MS)

work load control

Pillai, Sreejit (2015) A decision support system for ERP projects in make -to-order manufacturing SMEs. PhD thesis, University of Greenwich.

worst-case analysis

Breit, J., Schmidt, G. and Strusevich, V.A. (2003) Non-preemptive two-machine open shop scheduling with non-availability constraints. Mathematical Methods of Operations Research, 57 (2). pp. 217-234. ISSN 1432-2994 (Print), 1432-5217 (Online) (doi:10.1007/s001860200267)

Kubzin, Mikhail A. and Strusevich, Vitaly A. (2004) Two-machine flowshop scheduling problems with no-wait jobs. Naval Research Logistics, 51 (4). pp. 613-631. ISSN 0894-069X (Print), 1520-6750 (Online) (doi:10.1002/nav.10118)

α-Fe

Arokiam, A. C., Barashev, A. V., Bacon, D. J. and Osetsky, Y. N. (2007) Atomic-scale computer simulation study of the interaction of Cu-rich precipitates with irradiation-produced defects in α-Fe. Philosophical Magazine, 87 (6). pp. 925-943. ISSN 1478–6435 (Print), 1478–6443 (Online) (doi:10.1080/14786430601003908)

This list was generated on Sun May 20 09:19:34 2018 BST.