Skip navigation

Items where Faculty / Department / Research Groups is "Faculty of Engineering & Science > Wolfson Centre for Bulk Solids Handling Technology"

Items where Faculty / Department / Research Groups is "Faculty of Engineering & Science > Wolfson Centre for Bulk Solids Handling Technology"

Up a level
Export as [feed] RSS
Jump to: 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2000 | 1999 | 1997 | 1995 | 1993
Number of items at this level: 101.

2018

Benoit, Hadrien, Ansart, Renaud, Neau, Herve, García-Triñanes, Pablo, Flamant, Gilles and Simonin, Olivier (2018) 3D numerical simulation of upflow bubbling fluidized bed in opaque tube under high flux solar heating. AIChE Journal. ISSN 0001-1541 (Print), 1547-5905 (Online) (In Press) (doi:10.1002/aic.16218)

Diaz-Rodriguez, P., García-Triñanes, P., Echezarreta-López, M. M., Santoveña, A. and Landin, M. (2018) Mineralized alginate hydrogels using marine carbonates for bone tissue engineering applications. Carbohydrate Polymers, 195. pp. 235-242. ISSN 0144-8617 (Print), 1879-1344 (Online) (doi:10.1016/j.carbpol.2018.04.101)

Garg, Vivek, Mallick, S. S., García-Trinanes, Pablo and Berry, Robert James (2018) An investigation into the flowability of fine powders used in pharmaceutical industries. Powder Technology, 336. pp. 375-382. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:10.1016/j.powtec.2018.06.014)

Ilic, Dusan, Williams, Kenneth, Farnish, Richard, Webb, Erin and Liu, Gary (2018) On the challenges facing the handling of solid biomass feedstocks. Biofuels, Bioproducts and Biorefining, 12 (2). pp. 187-202. ISSN 1932-104X (Print), 1932-1031 (Online) (doi:10.1002/bbb.1851)

Kaur, Baldeep and Jana, Soumendu (2018) Cavity soliton molecules and all-optical push-broom effect. Journal of Lightwave Technology, 36 (12). pp. 2463-2470. ISSN 0733-8724 (Print), 1558-2213 (Online) (doi:10.1109/JLT.2018.2815845)

Kaur, Baldeep, Mittal, Anu, Jana, Soumendu, Mallick, S.S. and Wypych, Peter (2018) Stability and phase space analysis of fluidized-dense phase pneumatic transport system. Powder Technology, 330. pp. 190-200. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:10.1016/j.powtec.2018.02.023)

Kotzur, Benjamin A., Berry, Robert J., Zigan, Stefan, García-Triñanes, Pablo and Bradley, Michael S. A. (2018) Particle Attrition Mechanisms, their characterisation, and application to horizontal lean phase pneumatic conveying systems: A review. Powder Technology, 334. pp. 76-105. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:10.1016/j.powtec.2018.04.047)

2017

Chakravarty, Somik, Fischer, Marc, García-Triñanes, Pablo, Parker, David, Le Bihan, Olivier and Morgeneyer, Martin (2017) Study of the particle motion induced by a vortex shaker. Powder Technology, 322. pp. 54-64. ISSN 0032-5910 (doi:10.1016/j.powtec.2017.08.026)

The University Of Greenwich (2017) STENT WO 2016116748 A1. WO 2016116748 A1.

Kaur, Baldeep and Jana, Soumendu (2017) Generation and dynamics of one-and two-dimensional cavity solitons in a vertical-cavity surface-emitting laser with a saturable absorber and frequency-selective feedback. Journal of the Optical Society of America B, 34 (7). pp. 1374-1385. ISSN 0740-3224 (Print), 1520-8540 (Online) (doi:10.1364/JOSAB.34.001374)

Kaur, Baldeep, Mittal, Anu, Mallick, S.S., Pan, Renhu and Jana, Soumendu (2017) Numerical simulation of fluidized dense-phase pneumatic conveying of powders to develop improved model for solids friction factor. Particuology, 35. pp. 42-50. ISSN 1674-2001 (doi:10.1016/j.partic.2016.11.006)

Sparrow, R. D, Adekunle, A. A. and Berry, R. J. (2017) LEOPARD lightweight encryption operation permutation addition rotation and diffusion. In: IEEE 10th International Conferences on Signal Processing and Communication Systems. IEEE, pp. 1-5. ISBN 978-1-5090-0941-1 (doi:10.1109/ICSPCS.2016.7843322)

2016

Cai, Guohua, Berry, Robert and Deng, Tong (2016) Analysis on flowability of cement based on powder flow tester. China Powder Science and Technology, 22 (1):120. pp. 97-100. ISSN 1008-5548 (doi:10.13732/j.issn.1008-5548.2016.01.023)

Deng, Tong and Bradley, Michael (2016) Determination of a particle size distribution criterion for predicting dense phase pneumatic conveying behaviour of granular and powder materials. Powder Technology, 304. pp. 32-40. ISSN 0032-5910 (doi:10.1016/j.powtec.2016.05.001)

Garcia Trinanes, Pablo (2016) Particle progress. The Chemical Engineer, 906 (7):3. pp. 38-40. ISSN 0302-0797

Kaur, Baldeep and Jana, Soumendu (2016) A generic travelling wave solution in dissipative laser cavity. Pramana, 87 (4):53. ISSN 0304-4289 (Print), 0973-7111 (Online) (doi:10.1007/s12043-016-1244-4)

Kaur, Baldeep, Mittal, Anu, Wypych, Peter, Mallick, S. S. and Jana, Soumendu (2016) On developing improved modelling and scale-up procedures for pneumatic conveying of fine powders. Powder Technology, 305. pp. 270-278. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:10.1016/j.powtec.2016.09.080)

Kotzur, Benjamin A., Bradley, Michael S.A., Berry, Robert J. and Farnish, Richard J. (2016) Breakage characteristics of granulated food products for prediction of attrition during lean-phase pneumatic conveying. International Journal of Food Engineering, 12 (9). ISSN 1556-3758 (Print), 2194-5764 (Online) (doi:10.1515/ijfe-2016-0045)

Lulbadda Waduge, L.L., Zigan, S., Stone, L.E., Belaidi, A. and García-Triñanes, P. (2016) Predicting concentrations of fine particles in enclosed vessels using a camera based system and CFD simulations. Process Safety and Environmental Protection, 105. pp. 262-273. ISSN 0957-5820 (Print), 1744-3598 (Online) (doi:10.1016/j.psep.2016.11.013)

Sparrow, R. D, Adekunle, A. A., Berry, R. J. and Farnish, R. J. (2016) A novel block cipher design paradigm for secured communication. In: 2016 Annual IEEE 10th International Systems Conference (SysCon). IEEE, Florida, United States of America, pp. 1-6. ISBN 978-1-4673-9519-9 (doi:10.1109/SYSCON.2016.7490659)

Sparrow, R. D., Adekunle, A. A., Berry, R. J. and Farnish, R. J. (2016) The affect of two cryptographic constructs on QoS and QoE for unmanned control vehicles. In: 2015 9th International Conference on Next Generation Mobile Applications, Services and Technologies. IEEE, pp. 265-269. ISBN 978-1-4799-8660-6 (doi:10.1109/NGMAST.2015.46)

2015

Barletta, Diego, Berry, Robert J., Larsson, Sylvia H., Lestander, Torbjörn A., Poletto, Massimo and Ramírez-Gómez, Álvaro (2015) Assessment on bulk solids best practice techniques for flow characterization and storage/handling equipment design for biomass materials of different classes. Fuel Processing Technology, 138. pp. 540-554. ISSN 0378-3820 (doi:10.1016/j.fuproc.2015.06.034)

Santana Perdomo, Jose Carmelo (2015) Development of a test protocol for industry to predict and optimise flow behaviour of blended powders utilising particle to bulk scale models. PhD thesis, University of Greenwich.

Sparrow, R. D., Adekunle, Andrew, Berry, Robert and Farnish, Richard (2015) Simulating and modelling the impact of secure communication latency for closed loop control. In: Internet Technologies and Applications (ITA), 2015. IEEE, Wrexham, UK, pp. 138-143. ISSN 9781479980369 (doi:10.1109/ITechA.2015.7317384)

Sparrow, R. D., Adekunle, Andrew, Berry, Robert and Farnish, Richard (2015) Study of two security constructs on throughput for wireless sensor multi-hop networks. In: 38th International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO), 2015, 25-29th May, Opatija. (doi:10.1109/MIPRO.2015.7160476)

Sparrow, R.D., Adekunle, A.A., Berry, R.J. and Farnish, R.J. (2015) Balancing throughput and latency for an aerial robot over a wireless secure communication link. In: 2015 IEEE 2nd International Conference on Cybernetics (CYBCONF). IEEE, pp. 184-189. ISBN 978-1-4799-8320-9 (doi:10.1109/CYBConf.2015.7175929)

2014

Berry, R.J., Bradley, M.S.A. and McGregor, R.G. (2014) Brookfield powder flow tester - Results of round robin tests with CRM-116 limestone powder. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 229 (3). pp. 215-230. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1177/0954408914525387)

Chen, Jinhu, Hutchings, Ian M., Deng, Tong, Bradley, Michael S. A. and Koziol, Krzysztof K. K. (2014) The effect of carbon nanotube orientation on erosive wear resistance of CNT-epoxy based composites. Carbon, 73. pp. 421-431. ISSN 0008-6223 (doi:10.1016/j.carbon.2014.02.083)

Chen, Jinhu, Trevarthen, James A., Deng, Tong, Bradley, Michael S.A., Rahatekar, Sameer S. and Koziol, Krzysztof K.K. (2014) Aligned carbon nanotube reinforced high performance polymer composites with low erosive wear. Composites Part A: Applied Science and Manufacturing, 67. pp. 86-95. ISSN 1359-835X (doi:10.1016/j.compositesa.2014.08.009)

Lakshman, Biju, Deng, Tong, Bradley, Michael S. A., Okereke, Michael ORCID: 0000-0002-2104-012X and McIlhagger, A. T. (2014) Erosive wear of polymer composite materials and its correlation with high strain rate mechanical properties. In: 2nd International Conference on Abrasive Processes - ICAP 2014 (Programme and Abstract Book). ICAP, Cambridge, United Kingdom, p. 24.

Sparrow, R. D., Adekunle, A. A., Berry, R. J. and Farnish, R. J. (2014) Simulating and modelling the impact of security constructs on latency for open loop control. In: 6th Computer Science and Electronic Engineering Conference (CEEC), 2014. IEEE, Colchester, pp. 85-90. ISBN 9781479966929 (doi:10.1109/CEEC.2014.6958560)

2013

Deng, Tong and Hussain, Tariq (2013) Taking charge. Solids & Bulk Handling. pp. 10-12.

Zigan, Stefan and Patel, Amit (2013) Theoretical and experimental testing of a scaling rule for predicting segregation in differently sized silos. KONA Powder and Particle Journal, 30. pp. 276-283. ISSN 0288-4534 (Print), 2187-5537 (Online)

2012

Baross, Anthony W., Wiles, Jonathan D. and Swaine, Ian L. (2012) Effects of the intensity of leg isometric training on the vasculature of trained and untrained limbs and resting blood pressure in middle-aged men. International Journal of Vascular Medicine, 2012:964697. pp. 1-8. ISSN 2090-2824 (Print), 2090-2832 (Online) (doi:10.1155/2012/964697)

Bradley, M., Farnish, R. and Deng, T. (2012) Predicting and preventing wear in pipe bends: Basic information for choosing a cost-effective wear protection solution. Bulk Solids Handling, 32 (4). pp. 26-31. ISSN 0173-9980

Hussain, Tariq, Kaialy, Waseem, Deng, Tong, Bradley, Mike S.A., Nokhodchi, Ali and Armour-Chélu, David (2012) A novel sensing technique for measurement of magnitude and polarity of electrostatic charge distribution across individual particles. International Journal of Pharmaceutics, 441 (1-2). pp. 781-789. ISSN 0378-5173 (doi:10.1016/j.ijpharm.2012.10.002)

2011

Bradley, Michael, Berry, Robert and Farnish, Richard (2011) Methods for design of hoppers. Silos, bins and bunkers for reliable gravity flow, for pharmaceutical, food, mineral and other applications. In: BulkSolids India 2011, 6-8 April 2011, Mumbai, India. (Unpublished)

Bradley, Michael, Farnish, Richard and Deng, Tong (2011) Predicting and preventing wear in pneumatic conveying systems. In: BulkSolids India 2011, 6-8 April 2011, Mumbai, India. (Unpublished)

Deng, T., Su, J.W., Zhang, Y., Bradley, M.S.A. and Wei, X.L. (2011) Making coal/biomass pellets for co-firing - a review and pioneer work. In: Proceedings of the Bioten Conference on Biomass Bioenergy and Biofuels 2010. CPL Press, Newbury, UK. ISBN 9781872691541

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2011) Centrifugal tester versus a novel design to measure particle adhesion strength and investigation of effect of physical characteristics (size, shape, density) of food particles on food surfaces. Journal of Food Engineering, 104 (4). pp. 518-524. ISSN 0260-8774 (doi:10.1016/j.jfoodeng.2011.01.008)

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2011) Testing of powders for sensitivity to air effect segregation. Powder Metallurgy, 54 (4). pp. 468-470. ISSN 0032-5899 (Print), 1743-2901 (Online) (doi:10.1179/174329011X13073642060730)

2010

Ariza-Zafra, K., Berry, R., Bradley, M.S.A. and Santana, J.C. (2010) Achieving mass flow in silos with shallow converging sections using inverted cones. Bulk Solids Handling (Whitepaper). ISSN 0173-9980

Aziza-Zafra, Karol (2010) A hat trick for coal handling. International Bulk Journal, 5. pp. 67-70. ISSN 0260-1087

Deng, Tong, Paul, Kirsty A., Bradley, Michael S.A., Immins, Lee, Preston, Chris, Scott, Jerry F. and Welfare, Eloise H. (2010) Investigations on air induced segregation of pharmaceutical powders and effect of material flow functions. Powder Technology, 203 (2). pp. 354-358. ISSN 0032-5910 (doi:10.1016/j.powtec.2010.05.028)

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2010) Testing of powders for sensitivity to air effect segregation. In: Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Florence, pp. 53-60. ISBN 978-189907219-4

Farnish, Richard (2010) Tackling powder handling problems. Industrial Minerals. pp. 59-60.

Kulkarni, P.A., Berry, R.J. and Bradley, M.S.A. (2010) Review of the flowability measuring techniques for powder metallurgy industry. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 224 (3). pp. 159-168. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/09544089JPME299)

Owonikoko, A., Berry, R.J. and Bradley, M.S.A. (2010) Characterisation of extreme shape materials: “biomass and waste materials”. In: Bulk Solids Europe 2010 Conference and IMechE Symposium in New Frontiers in Bulk Materials Handling, 9-10 September 2010, Glasgow. (Submitted)

2009

Angulo, O., Berry, R., Bradley, M. and Antonijevic, M. (2009) Modelling of a dosator: an analytical approach based on measured powder flow properties. Journal of Pharmacy and Pharmacology, 61 (S1). A123-A123. ISSN 0022-3573 (Print), 2042-7158 (Online) (doi:10.1211/002235709789037053)

Angulo Pinzon, O.A., Berry, R.J., Bradley, M.S and Antonijevic, M.D. (2009) Modelling of dosator operation for improved manufacturing performance. In: 2009 AAPS Annual Meeting and Exposition, 8-12 Nov 2009, Los Angeles, USA.

Angulo Pinzon, O.A., Berry, R.J., Bradley, M.S., Farnish, R.J. and Antonijevic, M.D. (2009) The impact of powder flowing properties on dosator filling system operation. In: 2009 AAPS Annual Meeting and Exposition, 8-12 Nov 2009, Los Angeles, USA.

Deng, Tong, Bingley, Mark S. and Bradley, Mike S.A. (2009) Understanding particle dynamics in erosion testers: a review of influences of particle movement on erosion test conditions. Wear, 267 (11). pp. 2132-2140. ISSN 0043-1648 (doi:10.1016/j.wear.2009.02.020)

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2009) Direct measurement of powder flavor adhesion onto crisp surface using a novel adhesion tester. Particulate Science and Technology, 27 (4). pp. 362-372. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:10.1080/02726350902994035)

Farnish, R. (2009) Dosing of powders into processes - is your process control screwed? Bulk Solids Handling, 29 (5). pp. 278-281. ISSN 0173-9980

Robinson, J.P., Kingman, S.W., Snape, C.E., Barranco, R., Shang, H., Bradley, M.S.A. and Bradshaw, S.M. (2009) Remediation of oil-contaminated drill cuttings using continuous microwave heating. Chemical Engineering Journal, 152 (2-3). pp. 458-463. ISSN 1385-8947 (doi:10.1016/j.cej.2009.05.008)

Robinson, J.P., Kingman, S.W., Snape, C.E., Bradshaw, S.M., Bradley, M.S.A., Shang, H. and Barranco, R. (2009) Scale-up and design of a continuous microwave treatment system for the processing of oil-contaminated drill cuttings. Chemical Engineering Research and Design, 88 (2). pp. 146-154. ISSN 0263-8762 (doi:10.1016/j.cherd.2009.07.011)

Robinson, John, Kingman, Sam, Snape, Colin E., Bradley, Mike, Bradshaw, Steven, Thomas, Dominic J.M. and Page, Paul W. (2009) Microwave treatment of oil-contaminated drill cuttings at pilot scale. SPE Drilling and Completion, 24 (3). pp. 430-435. ISSN 1064-6671 (Print), 1930-0204 (Online) (doi:10.2118/111637-PA)

2008

Angulo Pinzon, O.A., Bradley, Michael, Berry, Robert and Farnish, Richard J. (2008) Modelling dosator filling and discharge of powder. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 586-591. ISBN 9788272062896

Ariza-Zafra, K., Berry, Robert and Bradley, Michael S. A. (2008) Review of models for predicting the discharge rates of bulk particulates from silos and bins. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 484-492. ISBN 9788272062896

Berry, Rob, Bradley, Michael S.A., Farnish, Richard J. and Angulo Pinzon, O.A. (2008) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 344-350. ISBN 9788272062896

Bradley, M. S. A., Reed, A. R., Berry, R. and Holmes, C.P.M. (2008) Start-up and running forces on bulk solids feeders: experimental findings versus available models. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 450-457. ISBN 9788272062896

Deng, T., Bingley, M.S., Bradley, M.S.A. and De Silva, S.R. (2008) A comparison of the gas-blast and centrifugal-accelerator erosion testers: The influence of particle dynamics. Wear, 265 (7-8). pp. 945-955. ISSN 0043-1648 (doi:10.1016/j.wear.2008.02.017)

Deng, Tong, Bradley, Michael S. A., Berry, Rob and Kostuch, J. (2008) Caking strength of granulated clay under frozen conditions. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 604-609. ISBN 9788272062896

Deng, Tong, Farnish, Richard J. and Bradley, Michael S.A. (2008) Evaluation of particle degradation due to high-speed impacts in a pneumatic handling system. Particulate Science and Technology, 26 (5). pp. 438-450. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:10.1080/02726350802367522)

Ermis, Ertan, Farnish, Richard J., Berry, Rob and Bradley, Michael S. A. (2008) Direct measurement of powder flavour adhesion on to a food surface using a novel adhesion tester. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 803-810. ISBN 9788272062896

Farnish, R.J., Berry, R. and Bradley, M. (2008) Development of a novel - filling technique loading bulk particulate materials into tankers or processes. Bulk Solids Handling, 28 (4). pp. 238-241. ISSN 0173-9980

Farnish, Richard J. (2008) Fine in the lab not equal fine for the process. The Chemical Engineer (802). pp. 36-37. ISSN 0302-0797

Farnish, Richard J., Kulkarni, Prasanna and Bradley, Michael S. A. (2008) Segregation of bulk particulates through multiple process handling steps. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 505-510. ISBN 9788272062896

2007

Berry, Rob, Bradley, Michael S. A., Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction test procedure, suitable for equipment design and powder characterisation. In: ICBMH Conference: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, Australia. (Unpublished)

Bradley, M. S. A. and Berry, R. (2007) Investigation of the effect of test procedure factors on the failure loci and derived failure functions obtained from annular shear cells. Powder Technology, 174 (1-2). pp. 60-63. ISSN 0032-5910 (doi:10.1016/j.powtec.2006.10.023)

Bradley, Michael S. A., Berry, Rob, Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia. (Unpublished)

Bradley, Michael S.A., Berry, Rob and Pillai, John (2007) Comparison between the angles of wall friction measured on an on-line wall friction tester and the Jenike wall friction tester. Powder Technology, 174 (1-2). pp. 64-70. ISSN 0032-5910 (doi:10.1016/j.powtec.2006.10.024)

Bradley, Michael S.A., Berry, Rob, Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction tester and test procedure, suitable for equipment design and powder characterisation. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)

Bradley, Michael S.A., Farnish, Richard J., Reed, Alan R. and Kulkarni, Prasanna (2007) Evaluation of air induced segregation tendencies in pharmaceutical blends using a bench scale tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)

Deng, T., Farnish, R.J. and Bradley, M.S.A. (2007) Pressure drop in dense phase conveying. Bulk Solids Handling, 27 (5). pp. 296-301. ISSN 0173-9980

Farnish, R. (2007) Common handling problems in bulk granular material. Aluminium International Today, 19 (3). pp. 38-40. ISSN 1475-455X

Farnish, R. (2007) Segregation of iron ores. Steel Times International, 31 (5). pp. 24-27. ISSN 0143-7798

Farnish, R. J. (2007) Gravity discharge of powders at high flux densities through the exploitation of intensified gas induction effects. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, ICBMH 2007. University of Newcastle, Newcastle, NSW, Australia, 2007, University of Newcastle, New South Wales, Australia.

Farnish, R.J. (2007) A changing world demands realistic expectations. Powder and Bulk Engineering, 21 (6). p. 8. ISSN 0897-6627

Zigan, Stefan, Thorpe, Rex B., Tuzun, Ugur, Enstad, Gisle G. and Battistin, Flavio (2007) Theoretical and experimental testing of a scaling rule for air current segregation of alumina powder in cylindrical silos. Powder Technology, 183 (1). pp. 133-145. ISSN 0032-5910 (doi:10.1016/j.powtec.2007.11.030)

2006

Christakis, N., Wang, J., Patel, M.K., Bradley, M.S.A., Leaper, M.C. and Cross, M. (2006) Aggregation and caking processes of granular materials: continuum model and numerical simulation with application to sugar. Advanced Powder Technology, 17 (5). pp. 543-565. ISSN 0921-8831 (doi:10.1163/156855206778440480)

Christakis, Nicholas, Chapelle, Pierre, Strusevich, Nadezhda, Bridle, Ian, Baxter, John, Patel, Mayur K., Cross, Mark, Tüzün, Ugur, Reed, Alan R. and Bradley, Michael S. A. (2006) A hybrid numerical model for predicting segregation during core flow discharge. Advanced Powder Technology, 17 (6). pp. 641-662. ISSN 0921-8831 (doi:10.1163/156855206778917715)

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2006) Predicting segregation of metal powders. Powder Metallurgy, 49 (3). pp. 206-208. ISSN 0032-5899 (Print), 1743-2901 (Online) (doi:10.1179/174329006X152442)

2005

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2005) Segregation of metal powders. In: Euro PM 2005: Powder Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA), Prague, Czech Republic, pp. 61-66. ISBN 9781899072187

2004

Chapelle, Pierre, Christakis, Nicholas, Abou-Chakra, Hadi, Bridle, Ian, Bradley, M.S.A., Patel, Mayur and Cross, Mark (2004) Computational model for prediction of particle degradation during dilute-phase pneumatic conveying: modeling of dilute-phase pneumatic conveying. Advanced Powder Technology, 15 (1). pp. 31-49. ISSN 0921-8831 (Print), 1568-5527 (Online) (doi:10.1163/15685520460740052)

Deng, T., Li, J., Chaudhry, A.R., Patel, M., Hutchings, I. and Bradley, M.S.A. (2004) Comparison between weight loss of bends in a pneumatic conveyor and erosion rate obtained in a centrifugal erosion tester for the same materials. Wear, 258 (1-4). pp. 402-411. ISSN 0043-1648 (doi:10.1016/j.wear.2004.02.012)

Deng, T., Patel, M., Hutchings, I. and Bradley, M.S.A. (2004) Effect of bend orientation on life and puncture point location due to solid particle erosion of a high concentration flow in pneumatic conveyors. Wear, 258 (1-4). pp. 426-433. ISSN 0043-1648 (doi:10.1016/j.wear.2004.02.010)

Deng, Tong, Bingley, Mark S. and Bradley, Michael S. A. (2004) The influence of particle rotation on the solid particle erosion rate of metals. Wear, 256 (11-12). pp. 1037-1049. ISSN 0043-1648 (doi:10.1016/S0043-1648(03)00536-2)

Farnish, R.J. (2004) Choosing the right storage vessel for your continuous operation. Powder and Bulk Engineering, 18 (11). pp. 33-37. ISSN 0897-6627

2003

Abou-Chakra, H., Tüzün, Ugur, Bridle, Ian, Leaper, M.C., Bradley, Michael and Reed, Alan (2003) Assessing the potential of a fine powder to segregate using laser diffraction and sieve particle size measuring techniques. Advanced Powder Technology, 14 (2). pp. 167-176. ISSN 0921-8831 (doi:10.1163/156855203763593967)

Farnish, R.J. (2003) Feeding of the 5,000 (-ton silo). Powder and Bulk Engineering, 17 (5). p. 10. ISSN 0897-6627

2002

Farnish, R. (2002) Perfecting powder storage & discharge. Chemical Processing, 65 (7). pp. 24-28. ISSN 0009-2630

Leaper, M.C., Bradley, Michael S.A., Cleaver, J.A.S., Bridle, Ian, Reed, Alan R., Abou-Chakra, H. and Tüzün, Ugur (2002) Constructing an engineering model for moisture migration in bulk solids as a prelude to predicting moisture migration caking. Advanced Powder Technology, 13 (4). pp. 411-424. (doi:10.1163/156855202320536043)

2000

Salter, G.F., Farnish, R.J., Bradley, M.S.A. and Burnett, A.J. (2000) Segregation of binary mixtures of particles during the filling of a two-dimensional representation of a hopper. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 214 (3). pp. 197-208. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/0954408001530056)

1999

Burnett, A.J., Bradley, M.S.A., O'Flynn, D.J., Deng, T. and Bingley, M. (1999) Anomalies in the results obtained from rotating disc accelerator erosion testers: a discussion of possible causes. Wear, 233-5. pp. 275-283. ISSN 0043-1648 (doi:10.1016/s0043-1648(99)00227-6)

1997

Farnish, R.J. (1997) Power consumption and profit margins - less is more. Powder Handling and Processing, 9 (4). pp. 355-357. ISSN 0934-7348

1995

Bradley, M. S. A., Burnett, A. J. and Woodhead, S. R. (1995) Measurement of pressure profiles in pneumatic conveying pipelines. Instrumentation and Measurement Technology Conference, 1995. IMTC/95. Proceedings. Integrating Intelligent Instrumentation and Control., IEEE. Institute of Electrical and Electronics Engineers, New York, pp. 766-769. ISBN 978-0780326156 (doi:10.1109/IMTC.1995.515419)

Burnett, A. J., De Silva, S. R. and Reed, A. R. (1995) Comparisons between "sand blast" and "centripetal effect accelerator" type erosion testers. Wear, 186-87 (PART 1). pp. 168-178. ISSN 0043-1648 (doi:10.1016/0043-1648(95)07143-1)

Burnett, A.J., Desilva, S.R. and Reed, Alan R. (1995) Comparisons between “sand blast” and “centripetal effect accelerator” type erosion testers. Wear, 186-18 (1). pp. 168-178. ISSN 0043-1648 (doi:10.1016/0043-1648(95)07143-1)

Schuster, T., Bradley, M.S.A. and Reed, Alan R. (1995) The dependence of power consumption of pneumatic conveying systems upon bulk material properties, pipeline bore and routing, and mode of flow. Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering, 209 (E1). pp. 69-75. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/PIME_PROC_1995_209_230_02)

1993

Burnett, A. J. (1993) Wear in pneumatic conveying pipelines. Powder Handling and Processing, 15 (2). pp. 123-128. ISSN 0934-7348

This list was generated on Tue Aug 14 13:53:54 2018 BST.