Skip navigation

Browse by Journal Title

Browse by Journal Title

Up a level
Export as [feed] RSS
Group by: Creators | Item Type | Uncontrolled Keywords | No Grouping
Number of items: 84.

Aerated discharge

Bianchini, A., Farnish, R.J., Gambuti, M. and Saccani, C. (2016) Predictive model for corn flour discharge rates through an aerated hopper. Powder Technology, 298. pp. 84-89. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2016.05.009)

air induced segregation

Deng, Tong ORCID: 0000-0003-4117-4317, Paul, Kirsty A., Bradley, Michael S.A., Immins, Lee, Preston, Chris, Scott, Jerry F. and Welfare, Eloise H. (2010) Investigations on air induced segregation of pharmaceutical powders and effect of material flow functions. Powder Technology, 203 (2). pp. 354-358. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2010.05.028)

Air injection

Bianchini, A., Farnish, R.J., Gambuti, M. and Saccani, C. (2016) Predictive model for corn flour discharge rates through an aerated hopper. Powder Technology, 298. pp. 84-89. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2016.05.009)

Air pollution control residues

Scuzzarella, A, Fernandez Bertos, M, Simons, S J, Hills, Colin and Carey, Paula (2006) Expansion of cohesive gas fluidized binary solid systems. Powder Technology, 163 (1-2). pp. 18-22. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2006.01.002)

alumina

Zigan, Stefan, Thorpe, Rex B., Tuzun, Ugur, Enstad, Gisle G. and Battistin, Flavio (2007) Theoretical and experimental testing of a scaling rule for air current segregation of alumina powder in cylindrical silos. Powder Technology, 183 (1). pp. 133-145. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2007.11.030)

Angle of repose

Falk, Joel, Berry, Robert, Broström, Markus and Larsson, Sylvia H. (2015) Mass flow and variability in screw feeding of biomass powders – relations to particle and bulk properties. Powder Technology, 276. pp. 80-88. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2015.02.023)

annular shear cell

Bradley, M. S. A. and Berry, R. (2007) Investigation of the effect of test procedure factors on the failure loci and derived failure functions obtained from annular shear cells. Powder Technology, 174 (1-2). pp. 60-63. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2006.10.023)

Bistability

Kaur, Baldeep, Mittal, Anu, Jana, Soumendu, Mallick, S.S. and Wypych, Peter (2018) Stability and phase space analysis of fluidized-dense phase pneumatic transport system. Powder Technology, 330. pp. 190-200. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2018.02.023)

Bulk density

Falk, Joel, Berry, Robert, Broström, Markus and Larsson, Sylvia H. (2015) Mass flow and variability in screw feeding of biomass powders – relations to particle and bulk properties. Powder Technology, 276. pp. 80-88. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2015.02.023)

Bulk solids

Bianchini, A., Farnish, R.J., Gambuti, M. and Saccani, C. (2016) Predictive model for corn flour discharge rates through an aerated hopper. Powder Technology, 298. pp. 84-89. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2016.05.009)

caking strength

Salehi, Hamid, Berry, Robert, Deng, Tong ORCID: 0000-0003-4117-4317, Larsson, Sylvia H., Farnish, Richard and Bradley, Michael (2019) Development and application of a novel cake strength tester. Powder Technology, 350. pp. 36-42. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2019.03.024)

Salehi Kahrizsangi, Hamid, Berry, Robert, Deng, Tong ORCID: 0000-0003-4117-4317, Larsson, Sylvia, Farnish, Richard and Bradley, Mike (2019) Development and application of a novel cake strength tester. Powder Technology, 350. pp. 36-42. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2019.03.024)

Carbamazepine

Adebisi, Adeola, Kaialy, Waseem, Hussain, Tariq, Hamidi, Hiba, Nokhodchi, Ali, Conway, Barbara and Addo, Kofi (2016) An assessment of triboelectrification effects on co-ground solid dispersions of carbamazepine. Powder Technology, 292. pp. 342-350. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2016.02.008)

CFD simulation

Zigan, Stefan, Thorpe, Rex B., Tuzun, Ugur, Enstad, Gisle G. and Battistin, Flavio (2007) Theoretical and experimental testing of a scaling rule for air current segregation of alumina powder in cylindrical silos. Powder Technology, 183 (1). pp. 133-145. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2007.11.030)

coal handling

Bradley, Michael S.A., Berry, Rob and Pillai, John (2007) Comparison between the angles of wall friction measured on an on-line wall friction tester and the Jenike wall friction tester. Powder Technology, 174 (1-2). pp. 64-70. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2006.10.024)

Cohesive powders

Scuzzarella, A, Fernandez Bertos, M, Simons, S J, Hills, Colin and Carey, Paula (2006) Expansion of cohesive gas fluidized binary solid systems. Powder Technology, 163 (1-2). pp. 18-22. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2006.01.002)

Correlation coefficient analysis

Falk, Joel, Berry, Robert, Broström, Markus and Larsson, Sylvia H. (2015) Mass flow and variability in screw feeding of biomass powders – relations to particle and bulk properties. Powder Technology, 276. pp. 80-88. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2015.02.023)

crushing strength

Rashid, Iyad, Daraghmeh, Nidal, Al-Remawi, Mayyas, Leharne, Stephen A., Chowdhry, Babur Z. and Badwan, Adnan (2010) Characterization of the impact of magnesium stearate lubrication on the tableting properties of chitin-Mg silicate as a superdisintegrating binder when compared to Avicel (R) 200. Powder Technology, 203 (3). pp. 609-619. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2010.06.028)

D-glucoseamine HCL

Adebisi, Adeola, Kaialy, Waseem, Hussain, Tariq, Hamidi, Hiba, Nokhodchi, Ali, Conway, Barbara and Addo, Kofi (2016) An assessment of triboelectrification effects on co-ground solid dispersions of carbamazepine. Powder Technology, 292. pp. 342-350. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2016.02.008)

Dense-phase

Kaur, Baldeep, Mittal, Anu, Jana, Soumendu, Mallick, S.S. and Wypych, Peter (2018) Stability and phase space analysis of fluidized-dense phase pneumatic transport system. Powder Technology, 330. pp. 190-200. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2018.02.023)

Kaur, Baldeep, Mittal, Anu, Wypych, Peter, Mallick, S. S. and Jana, Soumendu (2016) On developing improved modelling and scale-up procedures for pneumatic conveying of fine powders. Powder Technology, 305. pp. 270-278. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2016.09.080)

disintegration time

Rashid, Iyad, Daraghmeh, Nidal, Al-Remawi, Mayyas, Leharne, Stephen A., Chowdhry, Babur Z. and Badwan, Adnan (2010) Characterization of the impact of magnesium stearate lubrication on the tableting properties of chitin-Mg silicate as a superdisintegrating binder when compared to Avicel (R) 200. Powder Technology, 203 (3). pp. 609-619. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2010.06.028)

Electrostatic

Adebisi, Adeola, Kaialy, Waseem, Hussain, Tariq, Hamidi, Hiba, Nokhodchi, Ali, Conway, Barbara and Addo, Kofi (2016) An assessment of triboelectrification effects on co-ground solid dispersions of carbamazepine. Powder Technology, 292. pp. 342-350. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2016.02.008)

Experimental test

Bianchini, A., Farnish, R.J., Gambuti, M. and Saccani, C. (2016) Predictive model for corn flour discharge rates through an aerated hopper. Powder Technology, 298. pp. 84-89. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2016.05.009)

failure function

Bradley, M. S. A. and Berry, R. (2007) Investigation of the effect of test procedure factors on the failure loci and derived failure functions obtained from annular shear cells. Powder Technology, 174 (1-2). pp. 60-63. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2006.10.023)

Fine powders

Kaur, Baldeep, Mittal, Anu, Jana, Soumendu, Mallick, S.S. and Wypych, Peter (2018) Stability and phase space analysis of fluidized-dense phase pneumatic transport system. Powder Technology, 330. pp. 190-200. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2018.02.023)

Kaur, Baldeep, Mittal, Anu, Wypych, Peter, Mallick, S. S. and Jana, Soumendu (2016) On developing improved modelling and scale-up procedures for pneumatic conveying of fine powders. Powder Technology, 305. pp. 270-278. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2016.09.080)

Flow function

Falk, Joel, Berry, Robert, Broström, Markus and Larsson, Sylvia H. (2015) Mass flow and variability in screw feeding of biomass powders – relations to particle and bulk properties. Powder Technology, 276. pp. 80-88. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2015.02.023)

Garg, Vivek, Mallick, S. S., García-Trinanes, Pablo ORCID: 0000-0002-4993-2250 and Berry, Robert James (2018) An investigation into the flowability of fine powders used in pharmaceutical industries. Powder Technology, 336. pp. 375-382. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2018.06.014)

flow functions

Deng, Tong ORCID: 0000-0003-4117-4317, Paul, Kirsty A., Bradley, Michael S.A., Immins, Lee, Preston, Chris, Scott, Jerry F. and Welfare, Eloise H. (2010) Investigations on air induced segregation of pharmaceutical powders and effect of material flow functions. Powder Technology, 203 (2). pp. 354-358. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2010.05.028)

flow properties

Bradley, Michael S.A., Berry, Rob and Pillai, John (2007) Comparison between the angles of wall friction measured on an on-line wall friction tester and the Jenike wall friction tester. Powder Technology, 174 (1-2). pp. 64-70. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2006.10.024)

Flow property testing

Garg, Vivek, Mallick, S. S., García-Trinanes, Pablo ORCID: 0000-0002-4993-2250 and Berry, Robert James (2018) An investigation into the flowability of fine powders used in pharmaceutical industries. Powder Technology, 336. pp. 375-382. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2018.06.014)

Fluidized beds

Scuzzarella, A, Fernandez Bertos, M, Simons, S J, Hills, Colin and Carey, Paula (2006) Expansion of cohesive gas fluidized binary solid systems. Powder Technology, 163 (1-2). pp. 18-22. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2006.01.002)

fracture toughness

Taylor, L.J., Papadopoulos, D.G., Dunn, P.J., Bentham, A.C., Mitchell, J.C. ORCID: 0000-0003-2945-3292 and Snowden, M.J. (2004) Mechanical characterisation of powders using nanoindentation. Powder Technology, 143-4. pp. 179-185. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2004.04.012)

Gemfibrozil

Rashid, Iyad, Daraghmeh, Nidal, Al-Remawi, Mayyas, Leharne, Stephen A., Chowdhry, Babur Z. and Badwan, Adnan (2010) Characterization of the impact of magnesium stearate lubrication on the tableting properties of chitin-Mg silicate as a superdisintegrating binder when compared to Avicel (R) 200. Powder Technology, 203 (3). pp. 609-619. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2010.06.028)

Granular mixing experiments

Simons, T.A.H., Bensmann, S., Zigan, Stefan, Feise, H.J., Zetzener, H. and Kwade, A. (2015) Characterization of granular mixing in a helical ribbon blade blender. Powder Technology, 293. pp. 15-25. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2015.11.041)

Hopper design

Garg, Vivek, Mallick, S. S., García-Trinanes, Pablo ORCID: 0000-0002-4993-2250 and Berry, Robert James (2018) An investigation into the flowability of fine powders used in pharmaceutical industries. Powder Technology, 336. pp. 375-382. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2018.06.014)

Ibuprofen

Rashid, Iyad, Daraghmeh, Nidal, Al-Remawi, Mayyas, Leharne, Stephen A., Chowdhry, Babur Z. and Badwan, Adnan (2010) Characterization of the impact of magnesium stearate lubrication on the tableting properties of chitin-Mg silicate as a superdisintegrating binder when compared to Avicel (R) 200. Powder Technology, 203 (3). pp. 609-619. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2010.06.028)

Jenike wall friction tester

Bradley, Michael S.A., Berry, Rob and Pillai, John (2007) Comparison between the angles of wall friction measured on an on-line wall friction tester and the Jenike wall friction tester. Powder Technology, 174 (1-2). pp. 64-70. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2006.10.024)

lean phase

Kotzur, Benjamin A., Berry, Robert J., Zigan, Stefan, García-Triñanes, Pablo ORCID: 0000-0002-4993-2250 and Bradley, Michael S. A. (2018) Particle Attrition Mechanisms, their characterisation, and application to horizontal lean phase pneumatic conveying systems: A review. Powder Technology, 334. pp. 76-105. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2018.04.047)

Linear stability analysis

Kaur, Baldeep, Mittal, Anu, Jana, Soumendu, Mallick, S.S. and Wypych, Peter (2018) Stability and phase space analysis of fluidized-dense phase pneumatic transport system. Powder Technology, 330. pp. 190-200. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2018.02.023)

lubricant

Rashid, Iyad, Daraghmeh, Nidal, Al-Remawi, Mayyas, Leharne, Stephen A., Chowdhry, Babur Z. and Badwan, Adnan (2010) Characterization of the impact of magnesium stearate lubrication on the tableting properties of chitin-Mg silicate as a superdisintegrating binder when compared to Avicel (R) 200. Powder Technology, 203 (3). pp. 609-619. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2010.06.028)

magnesium stearate

Rashid, Iyad, Daraghmeh, Nidal, Al-Remawi, Mayyas, Leharne, Stephen A., Chowdhry, Babur Z. and Badwan, Adnan (2010) Characterization of the impact of magnesium stearate lubrication on the tableting properties of chitin-Mg silicate as a superdisintegrating binder when compared to Avicel (R) 200. Powder Technology, 203 (3). pp. 609-619. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2010.06.028)

Mixing homogeneity

Simons, T.A.H., Bensmann, S., Zigan, Stefan, Feise, H.J., Zetzener, H. and Kwade, A. (2015) Characterization of granular mixing in a helical ribbon blade blender. Powder Technology, 293. pp. 15-25. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2015.11.041)

Modes of flow

Deng, Tong ORCID: 0000-0003-4117-4317 and Bradley, Michael (2016) Determination of a particle size distribution criterion for predicting dense phase pneumatic conveying behaviour of granular and powder materials. Powder Technology, 304. pp. 32-40. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2016.05.001)

nanoindentation

Taylor, L.J., Papadopoulos, D.G., Dunn, P.J., Bentham, A.C., Mitchell, J.C. ORCID: 0000-0003-2945-3292 and Snowden, M.J. (2004) Mechanical characterisation of powders using nanoindentation. Powder Technology, 143-4. pp. 179-185. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2004.04.012)

new caking tester

Salehi, Hamid, Berry, Robert, Deng, Tong ORCID: 0000-0003-4117-4317, Larsson, Sylvia H., Farnish, Richard and Bradley, Michael (2019) Development and application of a novel cake strength tester. Powder Technology, 350. pp. 36-42. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2019.03.024)

Salehi Kahrizsangi, Hamid, Berry, Robert, Deng, Tong ORCID: 0000-0003-4117-4317, Larsson, Sylvia, Farnish, Richard and Bradley, Mike (2019) Development and application of a novel cake strength tester. Powder Technology, 350. pp. 36-42. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2019.03.024)

numerical prediction

Chapelle, P., Abou-Chakra, H., Christakis, N., Bridle, I., Patel, M.K., Baxter, J., Tuzun, U. and Cross, M. (2004) Numerical predictions of particle degradation in industrial-scale pneumatic conveyors. Powder Technology, 143. pp. 321-330. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2004.04.024)

Particle attrition

Kotzur, Benjamin A., Berry, Robert J., Zigan, Stefan, García-Triñanes, Pablo ORCID: 0000-0002-4993-2250 and Bradley, Michael S. A. (2018) Particle Attrition Mechanisms, their characterisation, and application to horizontal lean phase pneumatic conveying systems: A review. Powder Technology, 334. pp. 76-105. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2018.04.047)

particle degradation

Chapelle, P., Abou-Chakra, H., Christakis, N., Bridle, I., Patel, M.K., Baxter, J., Tuzun, U. and Cross, M. (2004) Numerical predictions of particle degradation in industrial-scale pneumatic conveyors. Powder Technology, 143. pp. 321-330. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2004.04.024)

Particle technology

Chakravarty, Somik, Fischer, Marc, García-Triñanes, Pablo ORCID: 0000-0002-4993-2250, Parker, David, Le Bihan, Olivier and Morgeneyer, Martin (2017) Study of the particle motion induced by a vortex shaker. Powder Technology, 322. pp. 54-64. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2017.08.026)

Particulate materials

Deng, Tong ORCID: 0000-0003-4117-4317 and Bradley, Michael (2016) Determination of a particle size distribution criterion for predicting dense phase pneumatic conveying behaviour of granular and powder materials. Powder Technology, 304. pp. 32-40. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2016.05.001)

Permeability

Bianchini, A., Farnish, R.J., Gambuti, M. and Saccani, C. (2016) Predictive model for corn flour discharge rates through an aerated hopper. Powder Technology, 298. pp. 84-89. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2016.05.009)

pharmaceutical --------------------------------------------------------------------------------

Taylor, L.J., Papadopoulos, D.G., Dunn, P.J., Bentham, A.C., Mitchell, J.C. ORCID: 0000-0003-2945-3292 and Snowden, M.J. (2004) Mechanical characterisation of powders using nanoindentation. Powder Technology, 143-4. pp. 179-185. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2004.04.012)

Pharmaceutical excipients

Garg, Vivek, Mallick, S. S., García-Trinanes, Pablo ORCID: 0000-0002-4993-2250 and Berry, Robert James (2018) An investigation into the flowability of fine powders used in pharmaceutical industries. Powder Technology, 336. pp. 375-382. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2018.06.014)

pharmaceutical powders

Deng, Tong ORCID: 0000-0003-4117-4317, Paul, Kirsty A., Bradley, Michael S.A., Immins, Lee, Preston, Chris, Scott, Jerry F. and Welfare, Eloise H. (2010) Investigations on air induced segregation of pharmaceutical powders and effect of material flow functions. Powder Technology, 203 (2). pp. 354-358. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2010.05.028)

Phase space

Kaur, Baldeep, Mittal, Anu, Jana, Soumendu, Mallick, S.S. and Wypych, Peter (2018) Stability and phase space analysis of fluidized-dense phase pneumatic transport system. Powder Technology, 330. pp. 190-200. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2018.02.023)

plastic caking

Salehi, Hamid, Berry, Robert, Deng, Tong ORCID: 0000-0003-4117-4317, Larsson, Sylvia H., Farnish, Richard and Bradley, Michael (2019) Development and application of a novel cake strength tester. Powder Technology, 350. pp. 36-42. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2019.03.024)

Salehi Kahrizsangi, Hamid, Berry, Robert, Deng, Tong ORCID: 0000-0003-4117-4317, Larsson, Sylvia, Farnish, Richard and Bradley, Mike (2019) Development and application of a novel cake strength tester. Powder Technology, 350. pp. 36-42. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2019.03.024)

Pneumatic conveying

Kaur, Baldeep, Mittal, Anu, Jana, Soumendu, Mallick, S.S. and Wypych, Peter (2018) Stability and phase space analysis of fluidized-dense phase pneumatic transport system. Powder Technology, 330. pp. 190-200. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2018.02.023)

Kaur, Baldeep, Mittal, Anu, Wypych, Peter, Mallick, S. S. and Jana, Soumendu (2016) On developing improved modelling and scale-up procedures for pneumatic conveying of fine powders. Powder Technology, 305. pp. 270-278. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2016.09.080)

Kotzur, Benjamin A., Berry, Robert J., Zigan, Stefan, García-Triñanes, Pablo ORCID: 0000-0002-4993-2250 and Bradley, Michael S. A. (2018) Particle Attrition Mechanisms, their characterisation, and application to horizontal lean phase pneumatic conveying systems: A review. Powder Technology, 334. pp. 76-105. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2018.04.047)

Pneumatic conveying characteristics

Deng, Tong ORCID: 0000-0003-4117-4317 and Bradley, Michael (2016) Determination of a particle size distribution criterion for predicting dense phase pneumatic conveying behaviour of granular and powder materials. Powder Technology, 304. pp. 32-40. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2016.05.001)

pneumatic conveyor

Chapelle, P., Abou-Chakra, H., Christakis, N., Bridle, I., Patel, M.K., Baxter, J., Tuzun, U. and Cross, M. (2004) Numerical predictions of particle degradation in industrial-scale pneumatic conveyors. Powder Technology, 143. pp. 321-330. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2004.04.024)

Polymorphisim

Adebisi, Adeola, Kaialy, Waseem, Hussain, Tariq, Hamidi, Hiba, Nokhodchi, Ali, Conway, Barbara and Addo, Kofi (2016) An assessment of triboelectrification effects on co-ground solid dispersions of carbamazepine. Powder Technology, 292. pp. 342-350. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2016.02.008)

repeatability

Bradley, M. S. A. and Berry, R. (2007) Investigation of the effect of test procedure factors on the failure loci and derived failure functions obtained from annular shear cells. Powder Technology, 174 (1-2). pp. 60-63. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2006.10.023)

Ribbon blade blender

Simons, T.A.H., Bensmann, S., Zigan, Stefan, Feise, H.J., Zetzener, H. and Kwade, A. (2015) Characterization of granular mixing in a helical ribbon blade blender. Powder Technology, 293. pp. 15-25. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2015.11.041)

Scale-up validation

Kaur, Baldeep, Mittal, Anu, Wypych, Peter, Mallick, S. S. and Jana, Soumendu (2016) On developing improved modelling and scale-up procedures for pneumatic conveying of fine powders. Powder Technology, 305. pp. 270-278. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2016.09.080)

scaling rule

Zigan, Stefan, Thorpe, Rex B., Tuzun, Ugur, Enstad, Gisle G. and Battistin, Flavio (2007) Theoretical and experimental testing of a scaling rule for air current segregation of alumina powder in cylindrical silos. Powder Technology, 183 (1). pp. 133-145. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2007.11.030)

segregation

Zigan, Stefan, Thorpe, Rex B., Tuzun, Ugur, Enstad, Gisle G. and Battistin, Flavio (2007) Theoretical and experimental testing of a scaling rule for air current segregation of alumina powder in cylindrical silos. Powder Technology, 183 (1). pp. 133-145. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2007.11.030)

segregation index

Zigan, Stefan, Thorpe, Rex B., Tuzun, Ugur, Enstad, Gisle G. and Battistin, Flavio (2007) Theoretical and experimental testing of a scaling rule for air current segregation of alumina powder in cylindrical silos. Powder Technology, 183 (1). pp. 133-145. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2007.11.030)

shear displacement

Bradley, M. S. A. and Berry, R. (2007) Investigation of the effect of test procedure factors on the failure loci and derived failure functions obtained from annular shear cells. Powder Technology, 174 (1-2). pp. 60-63. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2006.10.023)

Shear strength

Falk, Joel, Berry, Robert, Broström, Markus and Larsson, Sylvia H. (2015) Mass flow and variability in screw feeding of biomass powders – relations to particle and bulk properties. Powder Technology, 276. pp. 80-88. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2015.02.023)

silo

Zigan, Stefan, Thorpe, Rex B., Tuzun, Ugur, Enstad, Gisle G. and Battistin, Flavio (2007) Theoretical and experimental testing of a scaling rule for air current segregation of alumina powder in cylindrical silos. Powder Technology, 183 (1). pp. 133-145. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2007.11.030)

Size influence

Deng, Tong ORCID: 0000-0003-4117-4317 and Bradley, Michael (2016) Determination of a particle size distribution criterion for predicting dense phase pneumatic conveying behaviour of granular and powder materials. Powder Technology, 304. pp. 32-40. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2016.05.001)

Solid dispersion

Adebisi, Adeola, Kaialy, Waseem, Hussain, Tariq, Hamidi, Hiba, Nokhodchi, Ali, Conway, Barbara and Addo, Kofi (2016) An assessment of triboelectrification effects on co-ground solid dispersions of carbamazepine. Powder Technology, 292. pp. 342-350. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2016.02.008)

Solids friction

Kaur, Baldeep, Mittal, Anu, Jana, Soumendu, Mallick, S.S. and Wypych, Peter (2018) Stability and phase space analysis of fluidized-dense phase pneumatic transport system. Powder Technology, 330. pp. 190-200. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2018.02.023)

Kaur, Baldeep, Mittal, Anu, Wypych, Peter, Mallick, S. S. and Jana, Soumendu (2016) On developing improved modelling and scale-up procedures for pneumatic conveying of fine powders. Powder Technology, 305. pp. 270-278. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2016.09.080)

statistical analysis

Salehi, Hamid, Berry, Robert, Deng, Tong ORCID: 0000-0003-4117-4317, Larsson, Sylvia H., Farnish, Richard and Bradley, Michael (2019) Development and application of a novel cake strength tester. Powder Technology, 350. pp. 36-42. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2019.03.024)

Salehi Kahrizsangi, Hamid, Berry, Robert, Deng, Tong ORCID: 0000-0003-4117-4317, Larsson, Sylvia, Farnish, Richard and Bradley, Mike (2019) Development and application of a novel cake strength tester. Powder Technology, 350. pp. 36-42. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2019.03.024)

Time consolidation

Garg, Vivek, Mallick, S. S., García-Trinanes, Pablo ORCID: 0000-0002-4993-2250 and Berry, Robert James (2018) An investigation into the flowability of fine powders used in pharmaceutical industries. Powder Technology, 336. pp. 375-382. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2018.06.014)

Torque

Simons, T.A.H., Bensmann, S., Zigan, Stefan, Feise, H.J., Zetzener, H. and Kwade, A. (2015) Characterization of granular mixing in a helical ribbon blade blender. Powder Technology, 293. pp. 15-25. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2015.11.041)

Triboelectrification

Adebisi, Adeola, Kaialy, Waseem, Hussain, Tariq, Hamidi, Hiba, Nokhodchi, Ali, Conway, Barbara and Addo, Kofi (2016) An assessment of triboelectrification effects on co-ground solid dispersions of carbamazepine. Powder Technology, 292. pp. 342-350. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2016.02.008)

This list was generated on Wed Oct 16 07:01:20 2019 UTC.