A

Adebisi, Adeola, Kaialy, Waseem, Hussain, Tariq, Hamidi, Hiba, Nokhodchi, Ali, Conway, Barbara and Addo, Kofi (2016) An assessment of triboelectrification effects on co-ground solid dispersions of carbamazepine. Powder Technology, 292. pp. 342-350. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2016.02.008)

Alshahed, Osamh S., Kaur, Baldeep ORCID: 0000-0002-1762-3058 , Bradley, Michael S.A. and Armour-Chelu, David (2024) Data-driven system identification and model predictive control of pneumatic conveying using nonlinear dynamics analysis for optimised energy consumption. Powder Technology, 449:120364. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2024.120364)

Alshahed, Osamh Sabri Mohammed Atia, Kaur, Baldeep ORCID: 0000-0002-1762-3058 , Bradley, Michael and Armour-Chelu, David (2023) Application of nonlinear dynamics analysis to gas-solid flow system in horizontal pneumatic conveying of plastic pellets. Powder Technology, 428:118837. pp. 1-16. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2023.118837)

B

Baroyi, Syahrul Anis Hazwani Mohd, Abel, Stashia Eleaness Rosland, Al-Awaadh, Alhussein M, Fikry, Mohammad, Shah, Nor Nadiah Abdul Karim, Salleh, Faiqa Shazeaa Mohd, Garg, Vivek ORCID: 0000-0002-8515-4759 , Deng, Tong ORCID: 0000-0003-4117-4317 and Yusof, Yus Aniza (2024) Sweet flow: exploring the flowability, caking, morphology, and solubility of date sugars as promising sugar substitutes. Powder Technology. ISSN 0032-5910 (Print), 0032-5910 (Online) (doi:https://doi.org/10.1016/j.powtec.2024.119925)

Bianchini, A., Farnish, R.J., Gambuti, M. and Saccani, C. (2016) Predictive model for corn flour discharge rates through an aerated hopper. Powder Technology, 298. pp. 84-89. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2016.05.009)

Bradley, M. S. A. and Berry, R. (2007) Investigation of the effect of test procedure factors on the failure loci and derived failure functions obtained from annular shear cells. Powder Technology, 174 (1-2). pp. 60-63. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2006.10.023)

Bradley, Michael S.A., Berry, Rob and Pillai, John (2007) Comparison between the angles of wall friction measured on an on-line wall friction tester and the Jenike wall friction tester. Powder Technology, 174 (1-2). pp. 64-70. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2006.10.024)

C

Chairopoulou, Makrina A., García-Triñanes, Pablo ORCID: 0000-0002-4993-2250 and Teipel, Ulrich (2022) Oyster shell reuse: a particle engineering perspective for the use as emulsion stabilizers. Powder Technology, 408:117721. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2022.117721)

Chakravarty, Somik, Fischer, Marc, García-Triñanes, Pablo ORCID: 0000-0002-4993-2250 , Parker, David, Le Bihan, Olivier and Morgeneyer, Martin (2017) Study of the particle motion induced by a vortex shaker. Powder Technology, 322. pp. 54-64. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2017.08.026)

Chapelle, P., Abou-Chakra, H., Christakis, N., Bridle, I., Patel, M.K., Baxter, J., Tuzun, U. and Cross, M. (2004) Numerical predictions of particle degradation in industrial-scale pneumatic conveyors. Powder Technology, 143. pp. 321-330. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2004.04.024)

D

Deng, Tong ORCID: 0000-0003-4117-4317 and Bradley, Michael (2016) Determination of a particle size distribution criterion for predicting dense phase pneumatic conveying behaviour of granular and powder materials. Powder Technology, 304. pp. 32-40. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2016.05.001)

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael S.A. (2021) A study of particle adhesion for cohesive powders using a novel mechanical surface energy tester. Powder Technology, 391. pp. 46-56. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.06.002)

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Salehi, Hamid ORCID: 0000-0002-2516-6619 and Bradley, Michael S. A. (2021) Correlations between segregation intensity and material properties such as particle sizes and adhesions and novel methods for assessment. Powder Technology, 387. pp. 215-226. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.04.023)

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Salehi, Hamid ORCID: 0000-0002-2516-6619 and Bradley, Michael S. A. (2020) An experimental study on free-surface rolling segregation and correlations with angle of repose and particle sphericity. Powder Technology, 379. pp. 307-320. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2020.10.077)

Deng, Tong ORCID: 0000-0003-4117-4317 , Paul, Kirsty A., Bradley, Michael S.A., Immins, Lee, Preston, Chris, Scott, Jerry F. and Welfare, Eloise H. (2010) Investigations on air induced segregation of pharmaceutical powders and effect of material flow functions. Powder Technology, 203 (2). pp. 354-358. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2010.05.028)

F

Falk, Joel, Berry, Robert, Broström, Markus and Larsson, Sylvia H. (2015) Mass flow and variability in screw feeding of biomass powders – relations to particle and bulk properties. Powder Technology, 276. pp. 80-88. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2015.02.023)

G

Garg, Vivek ORCID: 0000-0002-8515-4759 , Deng, Tong ORCID: 0000-0003-4117-4317 and Bradley, Michael (2021) A new method for assessing powder flowability based on physical properties and cohesiveness of particles using a small quantity of samples. Powder Technology. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.10.027)

Garg, Vivek ORCID: 0000-0002-8515-4759 , Mallick, S. S., García-Trinanes, Pablo ORCID: 0000-0002-4993-2250 and Berry, Robert James (2018) An investigation into the flowability of fine powders used in pharmaceutical industries. Powder Technology, 336. pp. 375-382. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2018.06.014)

K

Kaur, Baldeep ORCID: 0000-0002-1762-3058 , Mittal, Anu, Jana, Soumendu, Mallick, S.S. and Wypych, Peter (2018) Stability and phase space analysis of fluidized-dense phase pneumatic transport system. Powder Technology, 330. pp. 190-200. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2018.02.023)

Kaur, Baldeep ORCID: 0000-0002-1762-3058 , Mittal, Anu, Wypych, Peter, Mallick, S. S. and Jana, Soumendu (2016) On developing improved modelling and scale-up procedures for pneumatic conveying of fine powders. Powder Technology, 305. pp. 270-278. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2016.09.080)

Kotzur, Benjamin A., Berry, Robert J., Zigan, Stefan, García-Triñanes, Pablo ORCID: 0000-0002-4993-2250 and Bradley, Michael S. A. (2018) Particle Attrition Mechanisms, their characterisation, and application to horizontal lean phase pneumatic conveying systems: A review. Powder Technology, 334. pp. 76-105. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2018.04.047)

M

Massaro Sousa, Lucas ORCID: 0000-0002-4182-9347 and do Carmo Ferreira, Maria (2019) Densification behavior of dry spent coffee ground powders: experimental analysis and predictive methods. Powder Technology, 357. pp. 149-157. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2019.08.069)

R

Rashid, Iyad, Daraghmeh, Nidal, Al-Remawi, Mayyas, Leharne, Stephen A., Chowdhry, Babur Z. and Badwan, Adnan (2010) Characterization of the impact of magnesium stearate lubrication on the tableting properties of chitin-Mg silicate as a superdisintegrating binder when compared to Avicel (R) 200. Powder Technology, 203 (3). pp. 609-619. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2010.06.028)

Rohilla, Lokesh, Garg, Vivek ORCID: 0000-0002-8515-4759 , Mallick, Soumya and Setia, Gautam (2018) An experimental investigation on the effect of particle size into the flowability of fly ash. Powder Technology, 330. pp. 164-173. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2018.02.013)

S

Salehi, Hamid ORCID: 0000-0002-2516-6619 , Berry, Robert, Deng, Tong ORCID: 0000-0003-4117-4317 , Larsson, Sylvia H., Farnish, Richard and Bradley, Mike (2019) Development and application of a novel cake strength tester. Powder Technology, 350. pp. 36-42. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2019.03.024)

Salehi Kahrizsangi, Hamid ORCID: 0000-0002-2516-6619 , Cummins, John, Gallino, Enrico, Harrison, Neil, Hassanpour, Ali and Bradley, Michael (2022) A new approach to quantify powder's bed surface roughness in additive manufacturing. Powder Technology, 407:117614. pp. 1-13. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2022.117614)

Salehi Kahrizsangi, Hamid ORCID: 0000-0002-2516-6619 , Timmerfors, Jessica Gard, Hajmohammadi, Hajar, Garg, Vivek ORCID: 0000-0002-8515-4759 , Berry, Robert, Barletta, Diego, Poletto, Massimo, Jonsson, Leif J, Bradley, Michael and Larsson, Sylvia H. (2023) The role of particle size and other properties on silo discharge behaviour of chipped wood biomass. Powder Technology, 432:119174. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2023.119174)

Scuzzarella, A, Fernandez Bertos, M, Simons, S J, Hills, Colin and Carey, Paula (2006) Expansion of cohesive gas fluidized binary solid systems. Powder Technology, 163 (1-2). pp. 18-22. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2006.01.002)

Simons, T.A.H., Bensmann, S., Zigan, Stefan, Feise, H.J., Zetzener, H. and Kwade, A. (2015) Characterization of granular mixing in a helical ribbon blade blender. Powder Technology, 293. pp. 15-25. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2015.11.041)

T

Taylor, L.J., Papadopoulos, D.G., Dunn, P.J., Bentham, A.C., Mitchell, J.C. ORCID: 0000-0003-2945-3292 and Snowden, M.J. ORCID: 0000-0002-1087-2692 (2004) Mechanical characterisation of powders using nanoindentation. Powder Technology, 143-4. pp. 179-185. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2004.04.012)

W

Wardle, J. P. and Bradley, M. S. A. (2019) Layer deposition quality and powder properties in metal additive manufacturing: a study exploring the use of a simple shadowgraphy technique to explore the effect of spreader rake configuration and powder grain size on limits of spreadability. UNSPECIFIED. Elsevier. (Submitted)

Z

Zigan, Stefan, Thorpe, Rex B., Tuzun, Ugur, Enstad, Gisle G. and Battistin, Flavio (2007) Theoretical and experimental testing of a scaling rule for air current segregation of alumina powder in cylindrical silos. Powder Technology, 183 (1). pp. 133-145. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2007.11.030)