Items where Author is "Rizvi, M.J."

Group by: Item Type | Uncontrolled Keywords | No Grouping

ACF adhesion adhesive adhesives ageing ageing (materials) aging anisotropic conductive film (ACF) assembly process technology chip-on-flex (COF) computer modelling conductive particle contact angle contact resistance cooling efficiency copper copper track designs curing damage dielectric material diffusion electronic packaging failure films (states of matter) finite element modeling finite element modelling Flex-No-Lead project flexible circuit board flexible substrates flexible-substrates fluid dynamics flux Garofalo equation glass transition temperature growth rate interfacial reactions intermetallic compound layer intermetallic compounds jet impingement cooling system joints lead free solder lead-free soldering life-time loss modulus microelectronics Miner's law of linear damage accumulation modeling numerical modelling photonics polymers power electronics modules (PEMs) reliability Sn-2.8Ag-0.5Cu-1.0Bi SnPb and SnAgCu (solder alloys) solder solder joints solder-mask defined joints soldering storage modulus strength of materials stress surface tension thermal cycling thermo-mechanical thick film chip resistors Variable Frequency Microwave (VFM) heating Wettability wetting wetting force

Number of items: 93.

ACF

Rizvi, M.J., Bailey, Christopher ORCID: https://orcid.org/0000-0002-9438-3879 and Lu, Hua ORCID: https://orcid.org/0000-0002-4392-6562 (2008) Failure mechanisms of ACF joints under isothermal ageing. Microelectronics Journal, 39 (9). pp. 1101-1107. ISSN 0026-2692 (doi:10.1016/j.mejo.2008.01.045)

adhesion

Rizvi, M.J., Chan, Y.C., Bailey, C. ORCID: https://orcid.org/0000-0002-9438-3879, Lu, H. ORCID: https://orcid.org/0000-0002-4392-6562 and Sharif, A. (2005) The effect of curing on the performance of ACF bonded chip-on-flex assemblies after thermal ageing. Soldering & Surface Mount Technology, 17 (2). pp. 40-48. ISSN 0954-0911 (doi:10.1108/09540910510597492)

adhesive

Rizvi, M.J., Lu, H. ORCID: https://orcid.org/0000-0002-4392-6562, Bailey, C. ORCID: https://orcid.org/0000-0002-9438-3879, Chan, Y.C., Lee, M.Y. and Pang, C.H. (2007) Role of bonding time and temperature on the physical properties of coupled anisotropic conductive–nonconductive adhesive film for flip chip on glass technology. Microelectronic Engineering, 85 (1). pp. 238-244. ISSN 0167-9317 (doi:10.1016/j.mee.2007.05.045)

adhesives

Bailey, Christopher, Rizvi, M.J., Yin, Chunyan, Lu, Hua and Stoyanov, Stoyan (2007) Application of modelling for predicting the behaviour of polymers and adhesives in microelectronic and photonic devices. 6th International Conference on Polymers and Adhesives in Microelectronics and Photonics. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 240-244. ISBN 9781424411863 (doi:10.1109/POLYTR.2007.4339175)

ageing

ageing (materials)

aging

Rizvi, M.J., Bailey, Christopher ORCID: https://orcid.org/0000-0002-9438-3879, Chan, Y.C., Islam, M. and Lu, Hua ORCID: https://orcid.org/0000-0002-4392-6562 (2007) Effect of adding 0.3wt% Ni into the Sn-0.7wt% Cu solder - Part II: Growth of intermetallic layer with Cu during wetting and aging. Journal of Alloys and Compounds, 438 (1-2). pp. 122-128. ISSN 0925-8388 (doi:10.1016/j.jallcom.2006.08.071)

Rizvi, M.J., Chan, Y.C., Bailey, Christopher ORCID: https://orcid.org/0000-0002-9438-3879, Lu, Hua ORCID: https://orcid.org/0000-0002-4392-6562 and Islam, M.N. (2006) Effect of adding 1 wt% Bi into the Sn–2.8Ag–0.5Cu solder alloy on the intermetallic formations with Cu-substrate during soldering and isothermal aging. Journal of Alloys and Compounds, 407 (1-2). pp. 208-214. ISSN 0925-8388 (doi:10.1016/j.jallcom.2005.06.050)

anisotropic conductive film (ACF)

Rizvi, M.J., Bailey, Christopher ORCID: https://orcid.org/0000-0002-9438-3879, Chan, Y.C. and Lu, Hua ORCID: https://orcid.org/0000-0002-4392-6562 (2006) Effects of thermal cycling profiles on the performance of chip-on-flex assembly using anisotropic conductive films. Thermal and Thermomechanical Phenomena in Electronics Systems, 2006. ITHERM '06. The Tenth Intersociety Conference on. IEEE, pp. 855-860. ISBN 0780395247 (doi:10.1109/ITHERM.2006.1645436)

assembly process technology

Tilford, Tim, Bailey, Christopher, Parrott, Kevin, Rizvi, M.J., Yin, Chunyan, Sinclair, Keith I. and Desmulliez, Marc P.Y. (2008) Impact of assembly process technologies on electronic packaging materials. International Conference on Electronic Packaging Technology & High Density Packaging, 2008. ICEPT-HDP 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-6. ISBN 978-1-4244-2739-0 (online) 978-1-4244-2740-6 (print) (doi:10.1109/ICEPT.2008.4607039)

chip-on-flex (COF)

computer modelling

Rizvi, M.J., Bailey, C. ORCID: https://orcid.org/0000-0002-9438-3879 and Lu, H. ORCID: https://orcid.org/0000-0002-4392-6562 (2010) Damage predictions in a chip resistor solder joint on flexible circuit board. Microelectronic Engineering, 87 (10). pp. 1889-1895. ISSN 0167-9317 (doi:10.1016/j.mee.2009.11.023)

Rizvi, M.J., Bailey, Christopher ORCID: https://orcid.org/0000-0002-9438-3879, Chan, Y.C. and Lu, Hua ORCID: https://orcid.org/0000-0002-4392-6562 (2006) Comparative wetting behavior of Sn-0.7Cu and Sn-0.7Cu-0.3Ni solders on Cu and Ni substrates. 1st Electronics Systemintegration Technology Conference. Dresden, Saxony, Germany. 2006 proceedings. IEEE, Piscataway, NJ, USA, pp. 145-151. ISBN 142440553X (doi:10.1109/ITHERM.2006.1645436)

Rizvi, M.J., Yin, Chunyan ORCID: https://orcid.org/0000-0003-0298-0420 and Bailey, Christopher ORCID: https://orcid.org/0000-0002-9438-3879 (2006) Modeling the effect of lead-free soldering on flexible substrates. Electronic Materials and Packaging, 2006, EMAP 2006, International Conference on 11-14 Dec. 2006. IEEE, Piscataway, NJ, USA, pp. 1038-1042. ISBN 1424408334; 1424408342 (doi:10.1109/EMAP.2006.4430695)

conductive particle

contact angle

Rizvi, M.J., Bailey, Christopher ORCID: https://orcid.org/0000-0002-9438-3879, Chan, Y.C. and Lu, Hua ORCID: https://orcid.org/0000-0002-4392-6562 (2007) Effect of adding 0.3 wt% Ni into the Sn–0.7 wt%Cu solder: part I: wetting behavior on Cu and Ni substrates. Journal of Alloys and Compounds, 438 (1-2). pp. 116-121. ISSN 0925-8388 (doi:10.1016/j.jallcom.2006.08.048)

Rizvi, M.J., Chan, Y.C., Bailey, C. ORCID: https://orcid.org/0000-0002-9438-3879, Lu, H. ORCID: https://orcid.org/0000-0002-4392-6562, Islam, M.N. and Wu, B.Y. (2005) Wetting and Reaction of Sn-2.8Ag-0.5Cu-1.0Bi Solder with Cu and Ni Substrates. IEEE/TMS Journal of Electronic Materials, 34 (8). pp. 1115-1122. ISSN 0361-5235 (Print), 1543-186X (Online) (doi:10.1007/s11664-005-0239-6)

contact resistance

cooling efficiency

Rizvi, M.J., Skuriat, R., Tilford, Tim ORCID: https://orcid.org/0000-0001-8307-6403, Bailey, Christopher ORCID: https://orcid.org/0000-0002-9438-3879, Johnson, C. Mark and Lu, Hua ORCID: https://orcid.org/0000-0002-4392-6562 (2009) Modelling of jet-impingement cooling for power electronics. In: 10th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, 2009. EuroSimE 2009. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA. ISBN 978-1-4244-4160-0 (doi:10.1109/ESIME.2009.4938428)

copper

Rizvi, M.J., Lu, Hua ORCID: https://orcid.org/0000-0002-4392-6562 and Bailey, Christopher ORCID: https://orcid.org/0000-0002-9438-3879 (2009) Modeling the diffusion of solid copper into liquid solder alloys. Thin Solid Films, 517 (5). pp. 1686-1689. ISSN 0040-6090 (doi:10.1016/j.tsf.2008.09.105)

copper track designs

Rizvi, M.J., Yin, Chunyan, Bailey, Christopher and Lu, Hua (2007) Modelling the reliability of components on flexible substrates. IPACK 2007: proceedings of the ASME Interpack Conference 2007. American Society of Mechanical Engineers, New York, pp. 375-380. ISBN 9780791842775 (doi:10.1115/IPACK2007-33820)

curing

damage

dielectric material

diffusion

electronic packaging

failure

films (states of matter)

finite element modeling

finite element modelling

Flex-No-Lead project

Rizvi, M.J., Yin, C.Y ORCID: https://orcid.org/0000-0003-0298-0420, Bailey, C. ORCID: https://orcid.org/0000-0002-9438-3879 and Lu, H. ORCID: https://orcid.org/0000-0002-4392-6562 (2007) Performance and reliability of flexible substrates when subjected to lead-free processing. In: 16th European Microelectronics and Packaging Conference and Exhibition 2007(EMPC 2007). Curran Associates, Inc., Red Hook, NY, USA, pp. 589-594. ISBN 9781622764662

flexible circuit board

flexible substrates

Yin, Chunyan ORCID: https://orcid.org/0000-0003-0298-0420, Rizvi, M.J., Lu, Hua ORCID: https://orcid.org/0000-0002-4392-6562 and Bailey, Christopher ORCID: https://orcid.org/0000-0002-9438-3879 (2006) Thermal-mechanical analysis of flexible substrates during lead-free solder reflow. Proceedings of the 1st Electronics Systemintegration Technology Conference, 2006. IEEE, pp. 1007-1011. ISBN 1 4244 0552 1 (doi:10.1109/ESTC.2006.280134)

flexible-substrates

fluid dynamics

flux

Garofalo equation

Rizvi, M.J., Lu, H. ORCID: https://orcid.org/0000-0002-4392-6562, Bailey, C. ORCID: https://orcid.org/0000-0002-9438-3879, Bevan, E., Poutney, N. and Coates, J. (2010) Finite element modelling of failures in thick film chip resistor solder joints. In: Microsystems Packaging Assembly and Circuits Technology Conference (IMPACT), 2010. in: Microsystems Packaging Assembly and Circuits Technology Conference (IMPACT), 2010 5th International Issue Date: 20-22 Oct. 2010 . IEEE Xplore Digital Library, Taipei, pp. 1-4. ISBN 978-1-4244-9785-0 (electronic), 978-1-4244-9783-6 (print) ISSN 2150-5934 (doi:10.1109/IMPACT.2010.5699488)