Skip navigation

Items where Author is "Patel, M.K."

Items where Author is "Patel, M.K."

Up a level
Export as [feed] RSS
Group by: Item Type | Uncontrolled Keywords | No Grouping
(CFD (CFD) (FIREDASS) (PGM) 3D flow simulation acoustic emission acoustic streaming adaptive grids aggregation aircraft safety aspect ratio backdraft binary alloy BS 7900 CAD caking capillarity capillary carbon monoxide carbonation case-based reasoning catalytic converters CFD CFD pipe bends CFD fire simulation CFD modelling CFD simulation CFD software charring materials CO2 capture compressible aerodynamics compressible viscous aerodynamics Computational Fluid Dynamics Computational Fluid Dynamics (CFD) computational modelling computational study continuum modelling damage mechanism degradation dendritic growth dielectric liquids dilute phase domains electric field effects electrodeposition electrodeposition of copper electrohydrodynamic electrolyte fluid flow electroplating electrostatic enclosure fire enthalpy equidistribution erosion Euler-Lagrange approach fibre optic hydrophone field model field models finite-volume code fire compartments FIRE Detection and Suppression Simulation fire effluent fire field model fire modelling fire simulation fire simulation software fire test fire-field modelling flashover flight simulation flow simulation fluid flow fluidized bed reactor fluidized-beds gaseous combustion model granular flows granular materials heaping heat transfer high aspect ratio microvia high aspect ratio microvias high-aspect ratio microfabrication hollow microstucture Hopper configuration IEC 60695-7-50 instabilities interpolation ISO 19700 lifetime prediction Local Area Networks local equivalence ratio local equivalence ratio (LER) magnetohydrodynamics maritime safety mass-spring system mathematical modelling megasonic agitation mesh sensitivity micro-mechanical parametrizations micro-particle imaging velocimetry (micro-PIV) microfabrication microfluidics moisture migration multi-inter phase slip algorithm multi-phase flow multi-physics modelling multiphase flow nanopatterning neural network numerical modeling numerical models numerical prediction office-based PCs open architecture oscillatory flow behaviour paper parallel processing techniques particle degradation PHYSICA platinum group metals platinum-group metals pneumatic conveyor pneumatic conveyors polymer solutions polymeric channels post-flashover printed circuit board (PCB) pyrolysis pyrolysis model pyrolysis modelling pyrometallurgical process recovery mechanism remote location segregation self-organising map shock capture simulation SMARTFIRE solid fuel combustion solid sorbent sprinkler systems surface tension Swissair Swissair Flight 111 thermal radiation modelling thermoelectricity toxicity tube furnace undercooling validation verification water misting systems
Number of items: 225.

(CFD

Ewer, J., Galea, E.R., Patel, M.K., Taylor, S., Knight, B. and Petridis, M. (1999) SMARTFIRE: an intelligent CFD based fire model. Journal of Fire Protection Engineering, 10 (1). pp. 13-27. ISSN 1042-3915 (Print), 1532-172X (Online) (doi:10.1177/104239159901000102)

(CFD)

Jia, F., Patel, M.K. and Galea, E.R. (2004) Simulating the Swissair flight 111 in-flight fire using the CFD fire simulation software SMARTFIRE. In: Fourth Triennial International Fire and Cabin Safety Research Conference, 15–19 Nov 2004, Lisbon, Portugal.

Benson, M., Bennett, C.R., Patel, M.K., Harry, J.E. and Cross, M. (2000) Collector-metal behaviour in the recovery of platinum-group metals from catalytic converters. Transactions of the Institute of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy, 109 (1). pp. 6-10. ISSN 0371-9553 (Print), 1743-2855 (Online) (doi:10.1179/mpm.2000.109.1.6)

Mawhinney, R.N., Grandison, A.J., Galea, E.R., Patel, M.K. and Ewer, J. (2000) The development of a CFD based simulator for water mist suppression systems: the development of the fire submodel. Journal of Applied Fire Science, 9 (4). pp. 311-345. ISSN 1044-4300 (Print), 1541-4183 (Online) (doi:10.2190/L07V-KGDD-KUPJ-D397)

Jia, F., Galea, E.R. and Patel, M.K. (1999) The numerical simulation of the noncharring pyrolysis process and fire development within a compartment. Applied Mathematical Modelling, 23 (8). pp. 587-607. ISSN 0307-904X (doi:10.1016/S0307-904X(99)00003-7)

Taylor, S., Galea, E.R., Ewer, J., Patel, M.K., Petridis, M. and Knight, B. (1998) SMARTFIRE: an intelligent CFD-based fire model. CMS Press, Greenwich, London, UK. ISBN 1899991301

(FIREDASS)

Mawhinney, R.N., Grandison, A.J., Galea, E.R., Patel, M.K. and Ewer, J. (2000) The development of a CFD based simulator for water mist suppression systems: the development of the fire submodel. Journal of Applied Fire Science, 9 (4). pp. 311-345. ISSN 1044-4300 (Print), 1541-4183 (Online) (doi:10.2190/L07V-KGDD-KUPJ-D397)

(PGM)

Benson, M., Bennett, C.R., Patel, M.K., Harry, J.E. and Cross, M. (2000) Collector-metal behaviour in the recovery of platinum-group metals from catalytic converters. Transactions of the Institute of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy, 109 (1). pp. 6-10. ISSN 0371-9553 (Print), 1743-2855 (Online) (doi:10.1179/mpm.2000.109.1.6)

3D flow simulation

Xia, Y., Häuser, J., Patel, M.K. and Cross, M. (2001) Feature-oriented grid topology design for aerospace configurations. In: Deutscher Luft- und Raumfahrtkongress 2001, 17-20 Sep 2001, Hamburg, Germany.

acoustic emission

Kao, D., Graham, D., Knight, B., Pericleous, K. and Patel, M.K. (2006) Identifying the damage mechanisms in paper using the acoustic emission monitoring technique. In: Proceedings of the 5th International Conference on Engineering Computational Technology. Civil-Comp Proceedings, 47 (84). Civil-Comp Press Ltd., Stirling, UK. ISBN 1905088116 ISSN 1759-3433 (doi:10.4203/ccp.84.47)

acoustic streaming

Strusevich, N., Bailey, C. and Patel, M.K. (2013) Computational modeling of electrodepostion in small features under megasonic agitation. In: 2013 European Microelectronics Packaging Conference (EMPC). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA.

Costello, S., Flynn, D., Kay, R.W., Desmulliez, M.P.Y., Strusevich, N., Patel, M.K., Bailey, C., Jones, A.C., Bennett, M., Price, D., Habeshaw, R., Demore, C. and Cochran, S. (2011) Electrodeposition of copper into PCB vias under megasonic agitation. In: MME 2011. Proceedings of the 22nd Micromechanics and Microsystems Technology Europe Workshop. MME2011, Norway, pp. 266-269. ISBN 9788278602249

adaptive grids

Patel, M.K., Pericleous, K.A. and Baldwin, S. (1995) The development of a structured mesh grid adaption technique for resolving shock discontinuities in upwind Navier-Stokes codes. International Journal for Numerical Methods in Fluids, 20 (10). pp. 1179-1197. ISSN 0271-2091 (Print), 1097-0363 (Online) (doi:10.1002/fld.1650201006)

aggregation

Christakis, N., Wang, J., Patel, M.K., Bradley, M.S.A., Leaper, M.C. and Cross, M. (2006) Aggregation and caking processes of granular materials: continuum model and numerical simulation with application to sugar. Advanced Powder Technology, 17 (5). pp. 543-565. ISSN 0921-8831 (doi:10.1163/156855206778440480)

aircraft safety

Mawhinney, R.N., Grandison, A.J., Galea, E.R., Patel, M.K. and Ewer, J. (2000) The development of a CFD based simulator for water mist suppression systems: the development of the fire submodel. Journal of Applied Fire Science, 9 (4). pp. 311-345. ISSN 1044-4300 (Print), 1541-4183 (Online) (doi:10.2190/L07V-KGDD-KUPJ-D397)

aspect ratio

Costello, S., Flynn, D., Kay, R.W., Desmulliez, M.P.Y., Strusevich, N., Patel, M.K., Bailey, C., Jones, A.C., Bennett, M., Price, D., Habeshaw, R., Demore, C. and Cochran, S. (2011) Electrodeposition of copper into PCB vias under megasonic agitation. In: MME 2011. Proceedings of the 22nd Micromechanics and Microsystems Technology Europe Workshop. MME2011, Norway, pp. 266-269. ISBN 9788278602249

backdraft

Jia, F., Galea, E.R. and Patel, M.K. (1997) The prediction of fire propagation in enclosure fires. In: Fire Safety Science: Proceedings of the fifth international symposium. International Association for Fire Safety Science, Greenwich, London, pp. 439-450. ISBN 4990062555 ISSN 1817-4299 (doi:10.3801/IAFSS.FSS.5-439)

binary alloy

Kao, A., Pericleous, K., Patel, M.K. and Voller, V. (2009) Effects of magnetic fields on crystal growth. International Journal of Cast Metals Research, 22 (1-4). pp. 147-150. ISSN 1364-0461 (Print), 1743-1336 (Online) (doi:10.1179/136404609X367551)

BS 7900

Mahalingam, A., Jia, F., Wang, Z., Patel, M.K. and Galea, E.R. (2011) Numerical investigation of tube furnace toxicity measurement method (ISO 19700). Fire and Materials, 36 (1). pp. 17-30. ISSN 0308-0501 (Print), 1099-1018 (Online) (doi:10.1002/fam.1079)

CAD

Xia, Y., Häuser, J., Patel, M.K. and Cross, M. (2001) Feature-oriented grid topology design for aerospace configurations. In: Deutscher Luft- und Raumfahrtkongress 2001, 17-20 Sep 2001, Hamburg, Germany.

caking

Christakis, N., Wang, J., Patel, M.K., Bradley, M.S.A., Leaper, M.C. and Cross, M. (2006) Aggregation and caking processes of granular materials: continuum model and numerical simulation with application to sugar. Advanced Powder Technology, 17 (5). pp. 543-565. ISSN 0921-8831 (doi:10.1163/156855206778440480)

Chapelle, P., Christakis, N., Wang, J., Strusevich, N., Patel, M.K., Cross, M., Abou-Chakra, H., Baxter, J. and Tuzun, U. (2005) Application of simulation technologies in the analysis of granular material behaviour during transport and storage. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 219 (1). pp. 43-52. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/095440805X7044)

capillarity

Tonry, C.E.H., Patel, M.K., Bailey, C., Desmuliez, M.P.Y. and Yu, W. (2013) Micro-scale modelling challenges in electric field assisted capillarity. In: Proceedings. 12th International Symposium on Distributed Computing and Applications to Business, Engineering & Science. DCABES 2013. IEEE Computer Society. Conference Publishing Services (CPS), Los Alamitos, CA, USA, 40- 43. ISBN 9780769550602 (doi:10.1109/DCABES.2013.57)

capillary

Chen, H., Yu, W., Cargill, S., Patel, M.K., Bailey, C., Tonry, C. and Desmulliez, M.P.Y. (2012) Self-encapsulated hollow microstructures formed by electric field-assisted capillarity. Microfluidics and Nanofluidics, 13 (1). pp. 75-82. ISSN 1613-4982 (Print), 1613-4990 (Online) (doi:10.1007/s10404-012-0942-6)

carbon monoxide

Wang, Z., Jia, F., Galea, E.R. and Patel, M.K. (2010) Predicting toxic gas concentrations at locations remote from the fire source. Fire and Materials, 35 (7). pp. 505-526. ISSN 0308-0501 (Print), 1099-1018 (Online) (doi:10.1002/fam.1069)

carbonation

Pericleous, K.A, Molaei, M. and Patel, M.K. (2012) CO2 removal from industrial off-gas streams by fluidized bed carbonation. In: Salazar-Villalpando, Maria. D., Neelameggham, Neal R., Guillen, Donna Post, Pati, Soobhankar and Krumdick, Gregory K., (eds.) Energy Technology 2012: Carbon Dioxide Management and Other Technologies. J. Wiley & Sons, Inc., USA, pp. 39-46. ISBN 978-1-1182-9138-2

Molaei, M., Pericleous, K.A. and Patel, M.K. (2012) Modelling and CFD simulation of a fluidized bed reactor to capture CO2 by solid sorbents. In: Proceedings of the 8th International Conference on CFD in the oil & gas, metallurgical and process industries. E SINTEF research reports, A22601 . SINTEF, Trondheim, Norway. ISBN 9788214052626 (Print), 9788251928113 (Electronic)

Molaei, M., Pericleous, K.A. and Patel, M.K. (2012) Modelling and CFD simulation of a fluidizes bed reactor to capture CO2 by solid sorbents. In: Proceedings of the 8th international conference on CFD in the oil & gas, metallurgical and process industries. SINTEF, Norway.

Molaei, M., Patel, M.K. and Pericleous, K. (2009) Modelling CO2 capture with a solid sorbent in a carbonation/calcination loop. In: Modelling and Simulationÿ. ACTA Press, Calgary, AB Canada T3E 7J9. ISBN 978-0-88986-798-7 (paperback)

case-based reasoning

Knight, B., Woon, F.L., Patel, M.K. and Petridis, M. (2006) CBR-conveyor: Solving the inverse and constraint problems to assist the design of pneumatic conveyors. In: Proceedings of the 5th International Conference on Engineering Computational Technology. Civil-Comp Press, Stirlingshire, UK. ISSN 1759-3433 (doi:10.4203/ccp.84.129)

catalytic converters

Benson, M., Bennett, C.R., Harry, J.E., Patel, M.K. and Cross, M. (2000) The recovery mechanism of platinum group metals from catalytic converters in spent automotive exhaust systems. Resources, Conservation and Recycling, 31 (1). pp. 1-7. ISSN 0921-3449 (doi:10.1016/S0921-3449(00)00062-8)

CFD

Grandison, A.J., Galea, E.R., Patel, M.K. and Ewer, J. (2004) The development of parallel implementation for a CFD based fire field model utilising conventional office based PCs. Journal of Applied Fire Science, 12 (2). pp. 137-157. ISSN 1044-4300 (Print), 1541-4183 (Online) (doi:10.2190/AGH5-EXUR-J110-HPHE)

Patel, M.K., Bailey, C., Djambazov, G., Shrimpton, J. and Jalili, V. (2003) Application of CFD in vacuum dezincing process. In: The 3rd International Conference on CFD in the Minerals and Process Industries [Proceedings]. CSIRO Publishing, Collingwood, Victoria, Australia, pp. 313-318. ISBN 978064309038X

Wang, Z., Jia, F., Galea, E.R., Patel, M.K. and Ewer, J. (2001) Simulating one of the CIB W14 round robin test cases using the SMARTFIRE fire field model. Fire Safety Journal, 36 (7). pp. 661-677. ISSN 0379-7112 (doi:10.1016/S0379-7112(01)00018-2)

Jia, F., Galea, E.R. and Patel, M.K. (1997) The prediction of fire propagation in enclosure fires. In: Fire Safety Science: Proceedings of the fifth international symposium. International Association for Fire Safety Science, Greenwich, London, pp. 439-450. ISBN 4990062555 ISSN 1817-4299 (doi:10.3801/IAFSS.FSS.5-439)

Patel, M.K., Pericleous, K.A. and Baldwin, S. (1995) The development of a structured mesh grid adaption technique for resolving shock discontinuities in upwind Navier-Stokes codes. International Journal for Numerical Methods in Fluids, 20 (10). pp. 1179-1197. ISSN 0271-2091 (Print), 1097-0363 (Online) (doi:10.1002/fld.1650201006)

CFD pipe bends

Hanson, R., Allsopp, D., Deng, T., Smith, D., Bradley, M.S.A., Hutchings, I.M. and Patel, M.K. (2002) A model to predict the life of pneumatic conveyor bends. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 216 (3). pp. 143-149. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/095440802320225284)

CFD fire simulation

Jia, F., Patel, M.K., Galea, E.R., Grandison, A. and Ewer, J. (2006) CFD fire simulation of the Swissair flight 111 in-flight fire - part II: fire spread analysis. The Aeronautical Journal of the Royal Aeronautical Society, 110 (1107):3069. pp. 303-314. ISSN 0001-9240

CFD modelling

Mahalingam, A., Jia, F., Wang, Z., Patel, M.K. and Galea, E.R. (2011) Numerical investigation of tube furnace toxicity measurement method (ISO 19700). Fire and Materials, 36 (1). pp. 17-30. ISSN 0308-0501 (Print), 1099-1018 (Online) (doi:10.1002/fam.1079)

Patel, M.K., Pericleous, K.A. and Baldwin, S. (1995) The development of a structured mesh grid adaption technique for resolving shock discontinuities in upwind Navier-Stokes codes. International Journal for Numerical Methods in Fluids, 20 (10). pp. 1179-1197. ISSN 0271-2091 (Print), 1097-0363 (Online) (doi:10.1002/fld.1650201006)

Patel, M.K., Pericleous, K. and Cross, M. (1993) Numerical modelling of circulating fluidized beds. International Journal of Computational Fluid Dynamics, 1 (2). pp. 161-176. ISSN 1061-8562 (Print), 1029-0257 (Online) (doi:10.1080/10618569308904470)

CFD simulation

Pericleous, K.A, Molaei, M. and Patel, M.K. (2012) CO2 removal from industrial off-gas streams by fluidized bed carbonation. In: Salazar-Villalpando, Maria. D., Neelameggham, Neal R., Guillen, Donna Post, Pati, Soobhankar and Krumdick, Gregory K., (eds.) Energy Technology 2012: Carbon Dioxide Management and Other Technologies. J. Wiley & Sons, Inc., USA, pp. 39-46. ISBN 978-1-1182-9138-2

Molaei, M., Pericleous, K.A. and Patel, M.K. (2012) Modelling and CFD simulation of a fluidized bed reactor to capture CO2 by solid sorbents. In: Proceedings of the 8th International Conference on CFD in the oil & gas, metallurgical and process industries. E SINTEF research reports, A22601 . SINTEF, Trondheim, Norway. ISBN 9788214052626 (Print), 9788251928113 (Electronic)

Molaei, M., Pericleous, K.A. and Patel, M.K. (2012) Modelling and CFD simulation of a fluidizes bed reactor to capture CO2 by solid sorbents. In: Proceedings of the 8th international conference on CFD in the oil & gas, metallurgical and process industries. SINTEF, Norway.

CFD software

Cross, M., Lyster, C, Bailey, C., Croft, N., Ewer, J., Leggett, P., McManus, K., Pericleous, K.A. and Patel, M.K. (1996) PHYSICA - A software environment for the modelling of multi-physics phenomena. ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 76 (S4). pp. 105-108. ISSN 0044-2267 (Print), 1521-4001 (Online) (doi:10.1002/zamm.19960761408)

charring materials

Jia, F., Galea, E.R. and Patel, M.K. (1999) Numerical simulation of the mass loss process in pyrolizing char materials. Fire and Materials, 23 (2). pp. 71-78. ISSN 0308-0501 (Print), 1099-1018 (Online) (doi:10.1002/(SICI)1099-1018(199903/04)23:2<71::AID-FAM672>3.0.CO;2-5)

CO2 capture

Pericleous, K.A, Molaei, M. and Patel, M.K. (2012) CO2 removal from industrial off-gas streams by fluidized bed carbonation. In: Salazar-Villalpando, Maria. D., Neelameggham, Neal R., Guillen, Donna Post, Pati, Soobhankar and Krumdick, Gregory K., (eds.) Energy Technology 2012: Carbon Dioxide Management and Other Technologies. J. Wiley & Sons, Inc., USA, pp. 39-46. ISBN 978-1-1182-9138-2

Molaei, M., Pericleous, K.A. and Patel, M.K. (2012) Modelling and CFD simulation of a fluidized bed reactor to capture CO2 by solid sorbents. In: Proceedings of the 8th International Conference on CFD in the oil & gas, metallurgical and process industries. E SINTEF research reports, A22601 . SINTEF, Trondheim, Norway. ISBN 9788214052626 (Print), 9788251928113 (Electronic)

Molaei, M., Pericleous, K.A. and Patel, M.K. (2012) Modelling and CFD simulation of a fluidizes bed reactor to capture CO2 by solid sorbents. In: Proceedings of the 8th international conference on CFD in the oil & gas, metallurgical and process industries. SINTEF, Norway.

Molaei, M., Patel, M.K. and Pericleous, K. (2009) Modelling CO2 capture with a solid sorbent in a carbonation/calcination loop. In: Modelling and Simulationÿ. ACTA Press, Calgary, AB Canada T3E 7J9. ISBN 978-0-88986-798-7 (paperback)

compressible aerodynamics

Patel, M.K., Pericleous, K.A. and Baldwin, S. (1995) The development of a structured mesh grid adaption technique for resolving shock discontinuities in upwind Navier-Stokes codes. International Journal for Numerical Methods in Fluids, 20 (10). pp. 1179-1197. ISSN 0271-2091 (Print), 1097-0363 (Online) (doi:10.1002/fld.1650201006)

compressible viscous aerodynamics

Patel, M.K., Pericleous, K.A. and Baldwin, S. (1995) The development of a structured mesh grid adaption technique for resolving shock discontinuities in upwind Navier-Stokes codes. International Journal for Numerical Methods in Fluids, 20 (10). pp. 1179-1197. ISSN 0271-2091 (Print), 1097-0363 (Online) (doi:10.1002/fld.1650201006)

Computational Fluid Dynamics

Jia, F., Patel, M.K. and Galea, E.R. (2004) Simulating the Swissair flight 111 in-flight fire using the CFD fire simulation software SMARTFIRE. In: Fourth Triennial International Fire and Cabin Safety Research Conference, 15–19 Nov 2004, Lisbon, Portugal.

Patel, M.K., Bailey, C., Djambazov, G., Shrimpton, J. and Jalili, V. (2003) Application of CFD in vacuum dezincing process. In: The 3rd International Conference on CFD in the Minerals and Process Industries [Proceedings]. CSIRO Publishing, Collingwood, Victoria, Australia, pp. 313-318. ISBN 978064309038X

Hanson, R., Allsopp, D., Deng, T., Smith, D., Bradley, M.S.A., Hutchings, I.M. and Patel, M.K. (2002) A model to predict the life of pneumatic conveyor bends. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 216 (3). pp. 143-149. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/095440802320225284)

Benson, M., Bennett, C.R., Patel, M.K., Harry, J.E. and Cross, M. (2000) Collector-metal behaviour in the recovery of platinum-group metals from catalytic converters. Transactions of the Institute of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy, 109 (1). pp. 6-10. ISSN 0371-9553 (Print), 1743-2855 (Online) (doi:10.1179/mpm.2000.109.1.6)

Mawhinney, R.N., Grandison, A.J., Galea, E.R., Patel, M.K. and Ewer, J. (2000) The development of a CFD based simulator for water mist suppression systems: the development of the fire submodel. Journal of Applied Fire Science, 9 (4). pp. 311-345. ISSN 1044-4300 (Print), 1541-4183 (Online) (doi:10.2190/L07V-KGDD-KUPJ-D397)

Jia, F., Galea, E.R. and Patel, M.K. (1999) The numerical simulation of the noncharring pyrolysis process and fire development within a compartment. Applied Mathematical Modelling, 23 (8). pp. 587-607. ISSN 0307-904X (doi:10.1016/S0307-904X(99)00003-7)

Ewer, J., Galea, E.R., Patel, M.K., Taylor, S., Knight, B. and Petridis, M. (1999) SMARTFIRE: an intelligent CFD based fire model. Journal of Fire Protection Engineering, 10 (1). pp. 13-27. ISSN 1042-3915 (Print), 1532-172X (Online) (doi:10.1177/104239159901000102)

Taylor, S., Galea, E.R., Ewer, J., Patel, M.K., Petridis, M. and Knight, B. (1998) SMARTFIRE: an intelligent CFD-based fire model. CMS Press, Greenwich, London, UK. ISBN 1899991301

Computational Fluid Dynamics (CFD)

Jia, F., Galea, E.R. and Patel, M.K. (1999) The numerical simulation of noncharring thermal degradation and its application to the prediction of compartment fire development. In: Fire Safety Science: Proceedings of the Sixth International Symposium. IAFSS Symposiums (6). International Association for Fire Safety Science, Greenwich, London, UK, pp. 953-964. ISBN 0925223255 (doi:10.3801/IAFSS.FSS.6-953)

computational modelling

Patel, M.K., Bailey, C., Djambazov, G., Shrimpton, J. and Jalili, V. (2003) Application of CFD in vacuum dezincing process. In: The 3rd International Conference on CFD in the Minerals and Process Industries [Proceedings]. CSIRO Publishing, Collingwood, Victoria, Australia, pp. 313-318. ISBN 978064309038X

Chapelle, P., Christakis, N., Abou-Chakra, H., Tuzun, U., Bridle, I., Bradley, M.S.A., Patel, M.K. and Cross, M. (2003) Computational modelling of particle degradation in dilute phase pneumatic conveyors. In: Kumar, Vipin, Gavrilova, Marina L., Tan, Chih Jeng Kenneth and L’Ecuyer, Pierre, (eds.) Computational Science and Its Applications - ICCSA 2003. International Conference Montreal, Canada, May 18–21, 2003 Proceedings. Lecture Notes in Computer Science, Part I (2667). Springer, Berlin Heidelberg, pp. 493-502. ISBN 9783540401551 (doi:10.1007/3-540-44839-X_53)

computational study

Christakis, N., Chapelle, P. and Patel, M.K. (2006) A computational study of segregation in granular material during heaping. In: 2006 Spring Meeting & 2nd Global Congress on Process Safety. American Institute of Chemical Engineers, New York, USA. ISBN 9780816910755

continuum modelling

Chapelle, P., Christakis, N., Wang, J., Strusevich, N., Patel, M.K., Cross, M., Abou-Chakra, H., Baxter, J. and Tuzun, U. (2005) Application of simulation technologies in the analysis of granular material behaviour during transport and storage. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 219 (1). pp. 43-52. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/095440805X7044)

Christakis, N., Patel, M.K., Cross, M., Baxter, J., Abou-Chakra, H. and Tüzün, U. (2001) Continuum modelling of granular flows using PHYSICA, a 3-D unstructured, finite-volume code. In: Computational Modeling of Materials, Minerals and Metals Processing [Conference Proceedings]. The Mineral, Metals and Materials Society (TMS), Warrendale, PA, USA, pp. 129-138. ISBN 0873395131

damage mechanism

Kao, D., Graham, D., Knight, B., Pericleous, K. and Patel, M.K. (2006) Identifying the damage mechanisms in paper using the acoustic emission monitoring technique. In: Proceedings of the 5th International Conference on Engineering Computational Technology. Civil-Comp Proceedings, 47 (84). Civil-Comp Press Ltd., Stirling, UK. ISBN 1905088116 ISSN 1759-3433 (doi:10.4203/ccp.84.47)

degradation

Chapelle, P., Christakis, N., Wang, J., Strusevich, N., Patel, M.K., Cross, M., Abou-Chakra, H., Baxter, J. and Tuzun, U. (2005) Application of simulation technologies in the analysis of granular material behaviour during transport and storage. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 219 (1). pp. 43-52. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/095440805X7044)

dendritic growth

Kao, A., Pericleous, K., Patel, M.K. and Voller, V. (2009) Effects of magnetic fields on crystal growth. International Journal of Cast Metals Research, 22 (1-4). pp. 147-150. ISSN 1364-0461 (Print), 1743-1336 (Online) (doi:10.1179/136404609X367551)

dielectric liquids

Tonry, C.E.H., Patel, M.K., Bailey, C., Desmuliez, M.P.Y. and Yu, W. (2013) Micro-scale modelling challenges in electric field assisted capillarity. In: Proceedings. 12th International Symposium on Distributed Computing and Applications to Business, Engineering & Science. DCABES 2013. IEEE Computer Society. Conference Publishing Services (CPS), Los Alamitos, CA, USA, 40- 43. ISBN 9780769550602 (doi:10.1109/DCABES.2013.57)

dilute phase

Chapelle, P., Christakis, N., Abou-Chakra, H., Tuzun, U., Bridle, I., Bradley, M.S.A., Patel, M.K. and Cross, M. (2003) Computational modelling of particle degradation in dilute phase pneumatic conveyors. In: Kumar, Vipin, Gavrilova, Marina L., Tan, Chih Jeng Kenneth and L’Ecuyer, Pierre, (eds.) Computational Science and Its Applications - ICCSA 2003. International Conference Montreal, Canada, May 18–21, 2003 Proceedings. Lecture Notes in Computer Science, Part I (2667). Springer, Berlin Heidelberg, pp. 493-502. ISBN 9783540401551 (doi:10.1007/3-540-44839-X_53)

domains

Tonry, C.E.H., Patel, M.K., Bailey, C., Desmuliez, M.P.Y. and Yu, W. (2013) Micro-scale modelling challenges in electric field assisted capillarity. In: Proceedings. 12th International Symposium on Distributed Computing and Applications to Business, Engineering & Science. DCABES 2013. IEEE Computer Society. Conference Publishing Services (CPS), Los Alamitos, CA, USA, 40- 43. ISBN 9780769550602 (doi:10.1109/DCABES.2013.57)

electric field effects

Tonry, C.E.H., Patel, M.K., Bailey, C., Desmuliez, M.P.Y. and Yu, W. (2013) Micro-scale modelling challenges in electric field assisted capillarity. In: Proceedings. 12th International Symposium on Distributed Computing and Applications to Business, Engineering & Science. DCABES 2013. IEEE Computer Society. Conference Publishing Services (CPS), Los Alamitos, CA, USA, 40- 43. ISBN 9780769550602 (doi:10.1109/DCABES.2013.57)

electrodeposition

Costello, S., Strusevich, N., Flyyn, D., Kay, R.W., Patel, M.K., Bailey, C., Price, D., Bennet, M., Jones, A.C. and Desmulliez, M.P.Y. (2012) Electrodeposition of copper into high aspect ratio PCB micro-via using megasonic agitation. In: DTIP 2012 Conference 2012: Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS. EDA Publishing Association, Grenoble, France, pp. 98-102. ISBN 9782355000201

Costello, S., Flynn, D., Kay, R.W., Desmulliez, M.P.Y., Strusevich, N., Patel, M.K., Bailey, C., Jones, A.C., Bennett, M., Price, D., Habeshaw, R., Demore, C. and Cochran, S. (2011) Electrodeposition of copper into PCB vias under megasonic agitation. In: MME 2011. Proceedings of the 22nd Micromechanics and Microsystems Technology Europe Workshop. MME2011, Norway, pp. 266-269. ISBN 9788278602249

electrodeposition of copper

Costello, S., Strusevich, N., Flynn, D., Kay, R.W., Patel, M.K., Bailey, C., Price, D., Bennet, M., Jones, A.C. and Desmulliez, M.P.Y. (2013) Electrodeposition of copper into high aspect ratio PCB micro-via using megasonic agitation. Microsystem Technologies, 19 (6). pp. 783-790. ISSN 0946-7076 (Print), 1432-1858 (Online) (doi:10.1007/s00542-013-1746-7)

Costello, S., Strusevich, N., Flyyn, D., Kay, R.W., Patel, M.K., Bailey, C., Price, D., Bennet, M., Jones, A.C. and Desmulliez, M.P.Y. (2012) Electrodeposition of copper into high aspect ratio PCB micro-via using megasonic agitation. In: DTIP 2012 Conference 2012: Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS. EDA Publishing Association, Grenoble, France, pp. 98-102. ISBN 9782355000201

electrohydrodynamic

Chen, H., Yu, W., Cargill, S., Patel, M.K., Bailey, C., Tonry, C. and Desmulliez, M.P.Y. (2012) Self-encapsulated hollow microstructures formed by electric field-assisted capillarity. Microfluidics and Nanofluidics, 13 (1). pp. 75-82. ISSN 1613-4982 (Print), 1613-4990 (Online) (doi:10.1007/s10404-012-0942-6)

electrolyte fluid flow

Costello, S., Strusevich, N., Patel, M.K., Bailey, C., Flynn, D., Kay, R.W., Price, D., Bennett, M., Jones, A.C., Habeshaw, R., Demore, C., Cochran, S. and Desmulliez, M.P.Y. (2011) Characterisation of ion transportation during electroplating of high aspect ratio microvias using megasonic agitation. In: EMPC-2011: 18th European Microelectronics and Packaging Conference. Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 1-7. ISBN 9780956808606

electroplating

Strusevich, N., Bailey, C. and Patel, M.K. (2013) Computational modeling of electrodepostion in small features under megasonic agitation. In: 2013 European Microelectronics Packaging Conference (EMPC). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA.

Costello, S., Flynn, D., Kay, R.W., Desmulliez, M.P.Y., Strusevich, N., Patel, M.K., Bailey, C., Jones, A.C., Bennett, M., Price, D., Habeshaw, R., Demore, C. and Cochran, S. (2011) Electrodeposition of copper into PCB vias under megasonic agitation. In: MME 2011. Proceedings of the 22nd Micromechanics and Microsystems Technology Europe Workshop. MME2011, Norway, pp. 266-269. ISBN 9788278602249

electrostatic

Li, H., Yu, W., Zhang, L., Liu, Z., Brown, K.E., Abraham, E., Cargill, S., Tonry, C., Patel, M.K., Bailey, C. and Desmulliez, M.P.Y. (2013) Simulation and modelling of sub-30 nm polymeric channels fabricated by electrostatic induced lithography. RSC Advances, 3 (29). pp. 11839-11845. ISSN 2046-2069 (doi:10.1039/c3ra40188j)

enclosure fire

Wang, Z., Jia, F., Galea, E.R. and Patel, M.K. (2010) Predicting toxic gas concentrations at locations remote from the fire source. Fire and Materials, 35 (7). pp. 505-526. ISSN 0308-0501 (Print), 1099-1018 (Online) (doi:10.1002/fam.1069)

enthalpy

Kao, A., Pericleous, K., Patel, M.K. and Voller, V. (2009) Effects of magnetic fields on crystal growth. International Journal of Cast Metals Research, 22 (1-4). pp. 147-150. ISSN 1364-0461 (Print), 1743-1336 (Online) (doi:10.1179/136404609X367551)

equidistribution

Patel, M.K., Pericleous, K.A. and Baldwin, S. (1995) The development of a structured mesh grid adaption technique for resolving shock discontinuities in upwind Navier-Stokes codes. International Journal for Numerical Methods in Fluids, 20 (10). pp. 1179-1197. ISSN 0271-2091 (Print), 1097-0363 (Online) (doi:10.1002/fld.1650201006)

erosion

Hanson, R., Allsopp, D., Deng, T., Smith, D., Bradley, M.S.A., Hutchings, I.M. and Patel, M.K. (2002) A model to predict the life of pneumatic conveyor bends. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 216 (3). pp. 143-149. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/095440802320225284)

Euler-Lagrange approach

Mawhinney, R.N., Galea, E.R. and Patel, M.K. (1996) Fire-sprinkler spray interaction modelling using an Euler-Lagrange approach. In: Conference Proceedings: Interflam '96: Seventh International Fire Science and Engineering Conference. Interscience Communications Ltd., Greenwich, London, UK, pp. 841-845. ISBN 0951632094

fibre optic hydrophone

Costello, S., Strusevich, N., Patel, M.K., Bailey, C., Flynn, D., Kay, R.W., Price, D., Bennett, M., Jones, A.C., Habeshaw, R., Demore, C., Cochran, S. and Desmulliez, M.P.Y. (2011) Characterisation of ion transportation during electroplating of high aspect ratio microvias using megasonic agitation. In: EMPC-2011: 18th European Microelectronics and Packaging Conference. Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 1-7. ISBN 9780956808606

field model

Wang, Z., Jia, F., Galea, E.R. and Patel, M.K. (2010) Predicting toxic gas concentrations at locations remote from the fire source. Fire and Materials, 35 (7). pp. 505-526. ISSN 0308-0501 (Print), 1099-1018 (Online) (doi:10.1002/fam.1069)

Jia, F., Galea, E.R. and Patel, M.K. (1997) The prediction of fire propagation in enclosure fires. In: Fire Safety Science: Proceedings of the fifth international symposium. International Association for Fire Safety Science, Greenwich, London, pp. 439-450. ISBN 4990062555 ISSN 1817-4299 (doi:10.3801/IAFSS.FSS.5-439)

field models

Jia, F., Galea, E.R. and Patel, M.K. (1999) The numerical simulation of noncharring thermal degradation and its application to the prediction of compartment fire development. In: Fire Safety Science: Proceedings of the Sixth International Symposium. IAFSS Symposiums (6). International Association for Fire Safety Science, Greenwich, London, UK, pp. 953-964. ISBN 0925223255 (doi:10.3801/IAFSS.FSS.6-953)

finite-volume code

Christakis, N., Patel, M.K., Cross, M., Baxter, J., Abou-Chakra, H. and Tüzün, U. (2001) Continuum modelling of granular flows using PHYSICA, a 3-D unstructured, finite-volume code. In: Computational Modeling of Materials, Minerals and Metals Processing [Conference Proceedings]. The Mineral, Metals and Materials Society (TMS), Warrendale, PA, USA, pp. 129-138. ISBN 0873395131

fire compartments

Kerrison, L., Galea, E.R. and Patel, M.K. (1998) A two-dimensional numerical investigation of the oscillatory flow behaviour in rectangular fire compartments with a single horizontal ceiling vent. Fire Safety Journal, 30 (4). pp. 357-382. ISSN 0379-7112 (doi:10.1016/S0379-7112(97)00042-8)

FIRE Detection and Suppression Simulation

Mawhinney, R.N., Grandison, A.J., Galea, E.R., Patel, M.K. and Ewer, J. (2000) The development of a CFD based simulator for water mist suppression systems: the development of the fire submodel. Journal of Applied Fire Science, 9 (4). pp. 311-345. ISSN 1044-4300 (Print), 1541-4183 (Online) (doi:10.2190/L07V-KGDD-KUPJ-D397)

fire effluent

Wang, Z., Jia, F., Galea, E.R. and Patel, M.K. (2010) Predicting toxic gas concentrations at locations remote from the fire source. Fire and Materials, 35 (7). pp. 505-526. ISSN 0308-0501 (Print), 1099-1018 (Online) (doi:10.1002/fam.1069)

fire field model

Jia, F., Galea, E.R. and Patel, M.K. (1999) The numerical simulation of the noncharring pyrolysis process and fire development within a compartment. Applied Mathematical Modelling, 23 (8). pp. 587-607. ISSN 0307-904X (doi:10.1016/S0307-904X(99)00003-7)

fire modelling

Jia, F., Patel, M.K. and Galea, E.R. (2004) Simulating the Swissair flight 111 in-flight fire using the CFD fire simulation software SMARTFIRE. In: Fourth Triennial International Fire and Cabin Safety Research Conference, 15–19 Nov 2004, Lisbon, Portugal.

Wang, Z., Jia, F., Galea, E.R., Patel, M.K. and Ewer, J. (2001) Simulating one of the CIB W14 round robin test cases using the SMARTFIRE fire field model. Fire Safety Journal, 36 (7). pp. 661-677. ISSN 0379-7112 (doi:10.1016/S0379-7112(01)00018-2)

Mawhinney, R.N., Grandison, A.J., Galea, E.R., Patel, M.K. and Ewer, J. (2000) The development of a CFD based simulator for water mist suppression systems: the development of the fire submodel. Journal of Applied Fire Science, 9 (4). pp. 311-345. ISSN 1044-4300 (Print), 1541-4183 (Online) (doi:10.2190/L07V-KGDD-KUPJ-D397)

Ewer, J.A.C., Galea, E.R., Patel, M.K. and Knight, B. (2000) The development of group solvers in the SMARTFIRE fire field model. In: ACME '2000 The 8th Annual Conference of the Association for Computational Mechanics in Engineering. Extended Abstracts. University of Greenwich, Greenwich, London, UK, pp. 54-57. ISBN 1861661509

Jia, F., Galea, E.R, and Patel, M.K. (2000) The numerical simulation of compartment fires using an integrated gas and solid phase combustion model. In: ACME '2000 The 8th Annual Conference of the Association for Computational Mechanics in Engineering. Extended Abstracts. University of Greenwich, Greenwich, London, UK, pp. 50-53. ISBN 1861661509

Ewer, J.A.C., Galea, E.R., Patel, M.K. and Knight, B. (1999) The development and application of group solvers in the SMARTFIRE fire field model. In: Conference Proceedings: Interflam 1999: 8th International Fire Science and Engineering Conference. Interscience Communications Ltd., Greenwich, London, UK, pp. 939-950. ISBN 0953231232

Ewer, J., Galea, E.R., Patel, M.K., Taylor, S., Knight, B. and Petridis, M. (1999) SMARTFIRE: an intelligent CFD based fire model. Journal of Fire Protection Engineering, 10 (1). pp. 13-27. ISSN 1042-3915 (Print), 1532-172X (Online) (doi:10.1177/104239159901000102)

Jia, F., Galea, E.R. and Patel, M.K. (1999) The numerical simulation of fire spread within a compartment using an integrated gas and solid phase combustion model. Journal of Applied Fire Science, 8 (4). pp. 327-352. ISSN 1044-4300 (Print), 1541-4183 (Online) (doi:10.2190/UY41-W38Q-X6KK-TXYV)

Taylor, S., Galea, E.R., Ewer, J., Patel, M.K., Petridis, M. and Knight, B. (1998) SMARTFIRE: an intelligent CFD-based fire model. CMS Press, Greenwich, London, UK. ISBN 1899991301

Mawhinney, R.N., Galea, E.R. and Patel, M.K. (1996) Fire-sprinkler spray interaction modelling using an Euler-Lagrange approach. In: Conference Proceedings: Interflam '96: Seventh International Fire Science and Engineering Conference. Interscience Communications Ltd., Greenwich, London, UK, pp. 841-845. ISBN 0951632094

fire simulation

Ewer, J., Galea, E.R., Patel, M.K., Taylor, S., Knight, B. and Petridis, M. (1999) SMARTFIRE: an intelligent CFD based fire model. Journal of Fire Protection Engineering, 10 (1). pp. 13-27. ISSN 1042-3915 (Print), 1532-172X (Online) (doi:10.1177/104239159901000102)

Taylor, S., Galea, E.R., Ewer, J., Patel, M.K., Petridis, M. and Knight, B. (1998) SMARTFIRE: an intelligent CFD-based fire model. CMS Press, Greenwich, London, UK. ISBN 1899991301

fire simulation software

Ewer, J.A.C., Galea, E.R., Patel, M.K. and Knight, B. (2000) The development of group solvers in the SMARTFIRE fire field model. In: ACME '2000 The 8th Annual Conference of the Association for Computational Mechanics in Engineering. Extended Abstracts. University of Greenwich, Greenwich, London, UK, pp. 54-57. ISBN 1861661509

Ewer, J.A.C., Galea, E.R., Patel, M.K. and Knight, B. (1999) The development and application of group solvers in the SMARTFIRE fire field model. In: Conference Proceedings: Interflam 1999: 8th International Fire Science and Engineering Conference. Interscience Communications Ltd., Greenwich, London, UK, pp. 939-950. ISBN 0953231232

fire test

Wang, Z., Jia, F., Galea, E.R., Patel, M.K. and Ewer, J. (2001) Simulating one of the CIB W14 round robin test cases using the SMARTFIRE fire field model. Fire Safety Journal, 36 (7). pp. 661-677. ISSN 0379-7112 (doi:10.1016/S0379-7112(01)00018-2)

fire-field modelling

Grandison, A.J., Galea, E.R., Patel, M.K. and Ewer, J. (2004) The development of parallel implementation for a CFD based fire field model utilising conventional office based PCs. Journal of Applied Fire Science, 12 (2). pp. 137-157. ISSN 1044-4300 (Print), 1541-4183 (Online) (doi:10.2190/AGH5-EXUR-J110-HPHE)

flashover

Jia, F., Galea, E.R. and Patel, M.K. (1999) The numerical simulation of the noncharring pyrolysis process and fire development within a compartment. Applied Mathematical Modelling, 23 (8). pp. 587-607. ISSN 0307-904X (doi:10.1016/S0307-904X(99)00003-7)

Jia, F., Galea, E.R. and Patel, M.K. (1999) The numerical simulation of noncharring thermal degradation and its application to the prediction of compartment fire development. In: Fire Safety Science: Proceedings of the Sixth International Symposium. IAFSS Symposiums (6). International Association for Fire Safety Science, Greenwich, London, UK, pp. 953-964. ISBN 0925223255 (doi:10.3801/IAFSS.FSS.6-953)

Jia, F., Galea, E.R. and Patel, M.K. (1997) The prediction of fire propagation in enclosure fires. In: Fire Safety Science: Proceedings of the fifth international symposium. International Association for Fire Safety Science, Greenwich, London, pp. 439-450. ISBN 4990062555 ISSN 1817-4299 (doi:10.3801/IAFSS.FSS.5-439)

flight simulation

Jia, F., Patel, M.K. and Galea, E.R. (2004) Simulating the Swissair flight 111 in-flight fire using the CFD fire simulation software SMARTFIRE. In: Fourth Triennial International Fire and Cabin Safety Research Conference, 15–19 Nov 2004, Lisbon, Portugal.

flow simulation

Tonry, C.E.H., Patel, M.K., Bailey, C., Desmuliez, M.P.Y. and Yu, W. (2013) Micro-scale modelling challenges in electric field assisted capillarity. In: Proceedings. 12th International Symposium on Distributed Computing and Applications to Business, Engineering & Science. DCABES 2013. IEEE Computer Society. Conference Publishing Services (CPS), Los Alamitos, CA, USA, 40- 43. ISBN 9780769550602 (doi:10.1109/DCABES.2013.57)

fluid flow

Costello, S., Strusevich, N., Flynn, D., Kay, R.W., Patel, M.K., Bailey, C., Price, D., Bennet, M., Jones, A.C. and Desmulliez, M.P.Y. (2013) Electrodeposition of copper into high aspect ratio PCB micro-via using megasonic agitation. Microsystem Technologies, 19 (6). pp. 783-790. ISSN 0946-7076 (Print), 1432-1858 (Online) (doi:10.1007/s00542-013-1746-7)

Costello, S., Strusevich, N., Flyyn, D., Kay, R.W., Patel, M.K., Bailey, C., Price, D., Bennet, M., Jones, A.C. and Desmulliez, M.P.Y. (2012) Electrodeposition of copper into high aspect ratio PCB micro-via using megasonic agitation. In: DTIP 2012 Conference 2012: Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS. EDA Publishing Association, Grenoble, France, pp. 98-102. ISBN 9782355000201

fluidized bed reactor

Pericleous, K.A, Molaei, M. and Patel, M.K. (2012) CO2 removal from industrial off-gas streams by fluidized bed carbonation. In: Salazar-Villalpando, Maria. D., Neelameggham, Neal R., Guillen, Donna Post, Pati, Soobhankar and Krumdick, Gregory K., (eds.) Energy Technology 2012: Carbon Dioxide Management and Other Technologies. J. Wiley & Sons, Inc., USA, pp. 39-46. ISBN 978-1-1182-9138-2

Molaei, M., Pericleous, K.A. and Patel, M.K. (2012) Modelling and CFD simulation of a fluidized bed reactor to capture CO2 by solid sorbents. In: Proceedings of the 8th International Conference on CFD in the oil & gas, metallurgical and process industries. E SINTEF research reports, A22601 . SINTEF, Trondheim, Norway. ISBN 9788214052626 (Print), 9788251928113 (Electronic)

Molaei, M., Pericleous, K.A. and Patel, M.K. (2012) Modelling and CFD simulation of a fluidizes bed reactor to capture CO2 by solid sorbents. In: Proceedings of the 8th international conference on CFD in the oil & gas, metallurgical and process industries. SINTEF, Norway.

fluidized-beds

Patel, M.K., Pericleous, K. and Cross, M. (1993) Numerical modelling of circulating fluidized beds. International Journal of Computational Fluid Dynamics, 1 (2). pp. 161-176. ISSN 1061-8562 (Print), 1029-0257 (Online) (doi:10.1080/10618569308904470)

gaseous combustion model

Jia, F., Galea, E.R, and Patel, M.K. (2000) The numerical simulation of compartment fires using an integrated gas and solid phase combustion model. In: ACME '2000 The 8th Annual Conference of the Association for Computational Mechanics in Engineering. Extended Abstracts. University of Greenwich, Greenwich, London, UK, pp. 50-53. ISBN 1861661509

Jia, F., Galea, E.R. and Patel, M.K. (1999) The numerical simulation of fire spread within a compartment using an integrated gas and solid phase combustion model. Journal of Applied Fire Science, 8 (4). pp. 327-352. ISSN 1044-4300 (Print), 1541-4183 (Online) (doi:10.2190/UY41-W38Q-X6KK-TXYV)

granular flows

Christakis, N., Chapelle, P. and Patel, M.K. (2006) A computational study of segregation in granular material during heaping. In: 2006 Spring Meeting & 2nd Global Congress on Process Safety. American Institute of Chemical Engineers, New York, USA. ISBN 9780816910755

Christakis, N., Patel, M.K., Cross, M., Baxter, J., Abou-Chakra, H. and Tüzün, U. (2001) Continuum modelling of granular flows using PHYSICA, a 3-D unstructured, finite-volume code. In: Computational Modeling of Materials, Minerals and Metals Processing [Conference Proceedings]. The Mineral, Metals and Materials Society (TMS), Warrendale, PA, USA, pp. 129-138. ISBN 0873395131

granular materials

Christakis, N., Wang, J., Patel, M.K., Bradley, M.S.A., Leaper, M.C. and Cross, M. (2006) Aggregation and caking processes of granular materials: continuum model and numerical simulation with application to sugar. Advanced Powder Technology, 17 (5). pp. 543-565. ISSN 0921-8831 (doi:10.1163/156855206778440480)

Chapelle, P., Christakis, N., Wang, J., Strusevich, N., Patel, M.K., Cross, M., Abou-Chakra, H., Baxter, J. and Tuzun, U. (2005) Application of simulation technologies in the analysis of granular material behaviour during transport and storage. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 219 (1). pp. 43-52. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/095440805X7044)

heaping

Christakis, N., Chapelle, P. and Patel, M.K. (2006) A computational study of segregation in granular material during heaping. In: 2006 Spring Meeting & 2nd Global Congress on Process Safety. American Institute of Chemical Engineers, New York, USA. ISBN 9780816910755

heat transfer

Christakis, N., Wang, J., Patel, M.K., Bradley, M.S.A., Leaper, M.C. and Cross, M. (2006) Aggregation and caking processes of granular materials: continuum model and numerical simulation with application to sugar. Advanced Powder Technology, 17 (5). pp. 543-565. ISSN 0921-8831 (doi:10.1163/156855206778440480)

high aspect ratio microvia

Strusevich, N., Bailey, C. and Patel, M.K. (2013) Computational modeling of electrodepostion in small features under megasonic agitation. In: 2013 European Microelectronics Packaging Conference (EMPC). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA.

high aspect ratio microvias

Costello, S., Strusevich, N., Patel, M.K., Bailey, C., Flynn, D., Kay, R.W., Price, D., Bennett, M., Jones, A.C., Habeshaw, R., Demore, C., Cochran, S. and Desmulliez, M.P.Y. (2011) Characterisation of ion transportation during electroplating of high aspect ratio microvias using megasonic agitation. In: EMPC-2011: 18th European Microelectronics and Packaging Conference. Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 1-7. ISBN 9780956808606

high-aspect ratio microfabrication

Chen, H., Yu, W., Cargill, S., Patel, M.K., Bailey, C., Tonry, C. and Desmulliez, M.P.Y. (2012) Self-encapsulated hollow microstructures formed by electric field-assisted capillarity. Microfluidics and Nanofluidics, 13 (1). pp. 75-82. ISSN 1613-4982 (Print), 1613-4990 (Online) (doi:10.1007/s10404-012-0942-6)

hollow microstucture

Chen, H., Yu, W., Cargill, S., Patel, M.K., Bailey, C., Tonry, C. and Desmulliez, M.P.Y. (2012) Self-encapsulated hollow microstructures formed by electric field-assisted capillarity. Microfluidics and Nanofluidics, 13 (1). pp. 75-82. ISSN 1613-4982 (Print), 1613-4990 (Online) (doi:10.1007/s10404-012-0942-6)

Hopper configuration

Xia, Y., Häuser, J., Patel, M.K. and Cross, M. (2001) Feature-oriented grid topology design for aerospace configurations. In: Deutscher Luft- und Raumfahrtkongress 2001, 17-20 Sep 2001, Hamburg, Germany.

IEC 60695-7-50

Mahalingam, A., Jia, F., Wang, Z., Patel, M.K. and Galea, E.R. (2011) Numerical investigation of tube furnace toxicity measurement method (ISO 19700). Fire and Materials, 36 (1). pp. 17-30. ISSN 0308-0501 (Print), 1099-1018 (Online) (doi:10.1002/fam.1079)

instabilities

Chen, H., Yu, W., Cargill, S., Patel, M.K., Bailey, C., Tonry, C. and Desmulliez, M.P.Y. (2012) Self-encapsulated hollow microstructures formed by electric field-assisted capillarity. Microfluidics and Nanofluidics, 13 (1). pp. 75-82. ISSN 1613-4982 (Print), 1613-4990 (Online) (doi:10.1007/s10404-012-0942-6)

interpolation

Knight, B., Woon, F.L., Patel, M.K. and Petridis, M. (2006) CBR-conveyor: Solving the inverse and constraint problems to assist the design of pneumatic conveyors. In: Proceedings of the 5th International Conference on Engineering Computational Technology. Civil-Comp Press, Stirlingshire, UK. ISSN 1759-3433 (doi:10.4203/ccp.84.129)

ISO 19700

Mahalingam, A., Jia, F., Wang, Z., Patel, M.K. and Galea, E.R. (2011) Numerical investigation of tube furnace toxicity measurement method (ISO 19700). Fire and Materials, 36 (1). pp. 17-30. ISSN 0308-0501 (Print), 1099-1018 (Online) (doi:10.1002/fam.1079)

lifetime prediction

Hanson, R., Allsopp, D., Deng, T., Smith, D., Bradley, M.S.A., Hutchings, I.M. and Patel, M.K. (2002) A model to predict the life of pneumatic conveyor bends. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 216 (3). pp. 143-149. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/095440802320225284)

Local Area Networks

Grandison, A.J., Galea, E.R., Patel, M.K. and Ewer, J. (2004) The development of parallel implementation for a CFD based fire field model utilising conventional office based PCs. Journal of Applied Fire Science, 12 (2). pp. 137-157. ISSN 1044-4300 (Print), 1541-4183 (Online) (doi:10.2190/AGH5-EXUR-J110-HPHE)

local equivalence ratio

Wang, Z., Jia, F., Galea, E.R. and Patel, M.K. (2010) Predicting toxic gas concentrations at locations remote from the fire source. Fire and Materials, 35 (7). pp. 505-526. ISSN 0308-0501 (Print), 1099-1018 (Online) (doi:10.1002/fam.1069)

local equivalence ratio (LER)

Mahalingam, A., Jia, F., Wang, Z., Patel, M.K. and Galea, E.R. (2011) Numerical investigation of tube furnace toxicity measurement method (ISO 19700). Fire and Materials, 36 (1). pp. 17-30. ISSN 0308-0501 (Print), 1099-1018 (Online) (doi:10.1002/fam.1079)

magnetohydrodynamics

Kao, A., Pericleous, K., Patel, M.K. and Voller, V. (2009) Effects of magnetic fields on crystal growth. International Journal of Cast Metals Research, 22 (1-4). pp. 147-150. ISSN 1364-0461 (Print), 1743-1336 (Online) (doi:10.1179/136404609X367551)

maritime safety

Mawhinney, R.N., Grandison, A.J., Galea, E.R., Patel, M.K. and Ewer, J. (2000) The development of a CFD based simulator for water mist suppression systems: the development of the fire submodel. Journal of Applied Fire Science, 9 (4). pp. 311-345. ISSN 1044-4300 (Print), 1541-4183 (Online) (doi:10.2190/L07V-KGDD-KUPJ-D397)

mass-spring system

Kao, D., Graham, D., Knight, B., Pericleous, K. and Patel, M.K. (2006) Identifying the damage mechanisms in paper using the acoustic emission monitoring technique. In: Proceedings of the 5th International Conference on Engineering Computational Technology. Civil-Comp Proceedings, 47 (84). Civil-Comp Press Ltd., Stirling, UK. ISBN 1905088116 ISSN 1759-3433 (doi:10.4203/ccp.84.47)

mathematical modelling

Molaei, M., Patel, M.K. and Pericleous, K. (2009) Modelling CO2 capture with a solid sorbent in a carbonation/calcination loop. In: Modelling and Simulationÿ. ACTA Press, Calgary, AB Canada T3E 7J9. ISBN 978-0-88986-798-7 (paperback)

Hanson, R., Allsopp, D., Deng, T., Smith, D., Bradley, M.S.A., Hutchings, I.M. and Patel, M.K. (2002) A model to predict the life of pneumatic conveyor bends. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 216 (3). pp. 143-149. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/095440802320225284)

megasonic agitation

Costello, S., Strusevich, N., Flynn, D., Kay, R.W., Patel, M.K., Bailey, C., Price, D., Bennet, M., Jones, A.C. and Desmulliez, M.P.Y. (2013) Electrodeposition of copper into high aspect ratio PCB micro-via using megasonic agitation. Microsystem Technologies, 19 (6). pp. 783-790. ISSN 0946-7076 (Print), 1432-1858 (Online) (doi:10.1007/s00542-013-1746-7)

Strusevich, N., Bailey, C. and Patel, M.K. (2013) Computational modeling of electrodepostion in small features under megasonic agitation. In: 2013 European Microelectronics Packaging Conference (EMPC). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA.

Costello, S., Strusevich, N., Flyyn, D., Kay, R.W., Patel, M.K., Bailey, C., Price, D., Bennet, M., Jones, A.C. and Desmulliez, M.P.Y. (2012) Electrodeposition of copper into high aspect ratio PCB micro-via using megasonic agitation. In: DTIP 2012 Conference 2012: Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS. EDA Publishing Association, Grenoble, France, pp. 98-102. ISBN 9782355000201

Costello, S., Flynn, D., Kay, R.W., Desmulliez, M.P.Y., Strusevich, N., Patel, M.K., Bailey, C., Jones, A.C., Bennett, M., Price, D., Habeshaw, R., Demore, C. and Cochran, S. (2011) Electrodeposition of copper into PCB vias under megasonic agitation. In: MME 2011. Proceedings of the 22nd Micromechanics and Microsystems Technology Europe Workshop. MME2011, Norway, pp. 266-269. ISBN 9788278602249

mesh sensitivity

Wang, Z., Jia, F., Galea, E.R., Patel, M.K. and Ewer, J. (2001) Simulating one of the CIB W14 round robin test cases using the SMARTFIRE fire field model. Fire Safety Journal, 36 (7). pp. 661-677. ISSN 0379-7112 (doi:10.1016/S0379-7112(01)00018-2)

micro-mechanical parametrizations

Chapelle, P., Christakis, N., Wang, J., Strusevich, N., Patel, M.K., Cross, M., Abou-Chakra, H., Baxter, J. and Tuzun, U. (2005) Application of simulation technologies in the analysis of granular material behaviour during transport and storage. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 219 (1). pp. 43-52. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/095440805X7044)

micro-particle imaging velocimetry (micro-PIV)

Costello, S., Strusevich, N., Flynn, D., Kay, R.W., Patel, M.K., Bailey, C., Price, D., Bennet, M., Jones, A.C. and Desmulliez, M.P.Y. (2013) Electrodeposition of copper into high aspect ratio PCB micro-via using megasonic agitation. Microsystem Technologies, 19 (6). pp. 783-790. ISSN 0946-7076 (Print), 1432-1858 (Online) (doi:10.1007/s00542-013-1746-7)

Costello, S., Strusevich, N., Flyyn, D., Kay, R.W., Patel, M.K., Bailey, C., Price, D., Bennet, M., Jones, A.C. and Desmulliez, M.P.Y. (2012) Electrodeposition of copper into high aspect ratio PCB micro-via using megasonic agitation. In: DTIP 2012 Conference 2012: Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS. EDA Publishing Association, Grenoble, France, pp. 98-102. ISBN 9782355000201

Costello, S., Strusevich, N., Patel, M.K., Bailey, C., Flynn, D., Kay, R.W., Price, D., Bennett, M., Jones, A.C., Habeshaw, R., Demore, C., Cochran, S. and Desmulliez, M.P.Y. (2011) Characterisation of ion transportation during electroplating of high aspect ratio microvias using megasonic agitation. In: EMPC-2011: 18th European Microelectronics and Packaging Conference. Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 1-7. ISBN 9780956808606

microfabrication

Tonry, C.E.H., Patel, M.K., Bailey, C., Desmuliez, M.P.Y. and Yu, W. (2013) Micro-scale modelling challenges in electric field assisted capillarity. In: Proceedings. 12th International Symposium on Distributed Computing and Applications to Business, Engineering & Science. DCABES 2013. IEEE Computer Society. Conference Publishing Services (CPS), Los Alamitos, CA, USA, 40- 43. ISBN 9780769550602 (doi:10.1109/DCABES.2013.57)

microfluidics

Chen, H., Yu, W., Cargill, S., Patel, M.K., Bailey, C., Tonry, C. and Desmulliez, M.P.Y. (2012) Self-encapsulated hollow microstructures formed by electric field-assisted capillarity. Microfluidics and Nanofluidics, 13 (1). pp. 75-82. ISSN 1613-4982 (Print), 1613-4990 (Online) (doi:10.1007/s10404-012-0942-6)

moisture migration

Christakis, N., Wang, J., Patel, M.K., Bradley, M.S.A., Leaper, M.C. and Cross, M. (2006) Aggregation and caking processes of granular materials: continuum model and numerical simulation with application to sugar. Advanced Powder Technology, 17 (5). pp. 543-565. ISSN 0921-8831 (doi:10.1163/156855206778440480)

multi-inter phase slip algorithm

Patel, M.K., Pericleous, K. and Cross, M. (1993) Numerical modelling of circulating fluidized beds. International Journal of Computational Fluid Dynamics, 1 (2). pp. 161-176. ISSN 1061-8562 (Print), 1029-0257 (Online) (doi:10.1080/10618569308904470)

multi-phase flow

Patel, M.K., Pericleous, K. and Cross, M. (1993) Numerical modelling of circulating fluidized beds. International Journal of Computational Fluid Dynamics, 1 (2). pp. 161-176. ISSN 1061-8562 (Print), 1029-0257 (Online) (doi:10.1080/10618569308904470)

multi-physics modelling

Cross, M., Lyster, C, Bailey, C., Croft, N., Ewer, J., Leggett, P., McManus, K., Pericleous, K.A. and Patel, M.K. (1996) PHYSICA - A software environment for the modelling of multi-physics phenomena. ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 76 (S4). pp. 105-108. ISSN 0044-2267 (Print), 1521-4001 (Online) (doi:10.1002/zamm.19960761408)

multiphase flow

Tonry, C.E.H., Patel, M.K., Bailey, C., Desmuliez, M.P.Y. and Yu, W. (2013) Micro-scale modelling challenges in electric field assisted capillarity. In: Proceedings. 12th International Symposium on Distributed Computing and Applications to Business, Engineering & Science. DCABES 2013. IEEE Computer Society. Conference Publishing Services (CPS), Los Alamitos, CA, USA, 40- 43. ISBN 9780769550602 (doi:10.1109/DCABES.2013.57)

nanopatterning

Li, H., Yu, W., Zhang, L., Liu, Z., Brown, K.E., Abraham, E., Cargill, S., Tonry, C., Patel, M.K., Bailey, C. and Desmulliez, M.P.Y. (2013) Simulation and modelling of sub-30 nm polymeric channels fabricated by electrostatic induced lithography. RSC Advances, 3 (29). pp. 11839-11845. ISSN 2046-2069 (doi:10.1039/c3ra40188j)

neural network

Kao, D., Graham, D., Knight, B., Pericleous, K. and Patel, M.K. (2006) Identifying the damage mechanisms in paper using the acoustic emission monitoring technique. In: Proceedings of the 5th International Conference on Engineering Computational Technology. Civil-Comp Proceedings, 47 (84). Civil-Comp Press Ltd., Stirling, UK. ISBN 1905088116 ISSN 1759-3433 (doi:10.4203/ccp.84.47)

numerical modeling

Strusevich, N., Bailey, C. and Patel, M.K. (2013) Computational modeling of electrodepostion in small features under megasonic agitation. In: 2013 European Microelectronics Packaging Conference (EMPC). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA.

numerical models

Knight, B., Woon, F.L., Patel, M.K. and Petridis, M. (2006) CBR-conveyor: Solving the inverse and constraint problems to assist the design of pneumatic conveyors. In: Proceedings of the 5th International Conference on Engineering Computational Technology. Civil-Comp Press, Stirlingshire, UK. ISSN 1759-3433 (doi:10.4203/ccp.84.129)

numerical prediction

Chapelle, P., Abou-Chakra, H., Christakis, N., Bridle, I., Patel, M.K., Baxter, J., Tuzun, U. and Cross, M. (2004) Numerical predictions of particle degradation in industrial-scale pneumatic conveyors. Powder Technology, 143. pp. 321-330. ISSN 0032-5910 (doi:10.1016/j.powtec.2004.04.024)

office-based PCs

Grandison, A.J., Galea, E.R., Patel, M.K. and Ewer, J. (2004) The development of parallel implementation for a CFD based fire field model utilising conventional office based PCs. Journal of Applied Fire Science, 12 (2). pp. 137-157. ISSN 1044-4300 (Print), 1541-4183 (Online) (doi:10.2190/AGH5-EXUR-J110-HPHE)

open architecture

Taylor, S., Galea, E.R., Ewer, J., Patel, M.K., Petridis, M. and Knight, B. (1998) SMARTFIRE: an intelligent CFD-based fire model. CMS Press, Greenwich, London, UK. ISBN 1899991301

oscillatory flow behaviour

Kerrison, L., Galea, E.R. and Patel, M.K. (1998) A two-dimensional numerical investigation of the oscillatory flow behaviour in rectangular fire compartments with a single horizontal ceiling vent. Fire Safety Journal, 30 (4). pp. 357-382. ISSN 0379-7112 (doi:10.1016/S0379-7112(97)00042-8)

paper

Kao, D., Graham, D., Knight, B., Pericleous, K. and Patel, M.K. (2006) Identifying the damage mechanisms in paper using the acoustic emission monitoring technique. In: Proceedings of the 5th International Conference on Engineering Computational Technology. Civil-Comp Proceedings, 47 (84). Civil-Comp Press Ltd., Stirling, UK. ISBN 1905088116 ISSN 1759-3433 (doi:10.4203/ccp.84.47)

parallel processing techniques

Grandison, A.J., Galea, E.R., Patel, M.K. and Ewer, J. (2004) The development of parallel implementation for a CFD based fire field model utilising conventional office based PCs. Journal of Applied Fire Science, 12 (2). pp. 137-157. ISSN 1044-4300 (Print), 1541-4183 (Online) (doi:10.2190/AGH5-EXUR-J110-HPHE)

particle degradation

Chapelle, P., Abou-Chakra, H., Christakis, N., Bridle, I., Patel, M.K., Baxter, J., Tuzun, U. and Cross, M. (2004) Numerical predictions of particle degradation in industrial-scale pneumatic conveyors. Powder Technology, 143. pp. 321-330. ISSN 0032-5910 (doi:10.1016/j.powtec.2004.04.024)

Chapelle, P., Christakis, N., Abou-Chakra, H., Tuzun, U., Bridle, I., Bradley, M.S.A., Patel, M.K. and Cross, M. (2003) Computational modelling of particle degradation in dilute phase pneumatic conveyors. In: Kumar, Vipin, Gavrilova, Marina L., Tan, Chih Jeng Kenneth and L’Ecuyer, Pierre, (eds.) Computational Science and Its Applications - ICCSA 2003. International Conference Montreal, Canada, May 18–21, 2003 Proceedings. Lecture Notes in Computer Science, Part I (2667). Springer, Berlin Heidelberg, pp. 493-502. ISBN 9783540401551 (doi:10.1007/3-540-44839-X_53)

PHYSICA

Christakis, N., Patel, M.K., Cross, M., Baxter, J., Abou-Chakra, H. and Tüzün, U. (2001) Continuum modelling of granular flows using PHYSICA, a 3-D unstructured, finite-volume code. In: Computational Modeling of Materials, Minerals and Metals Processing [Conference Proceedings]. The Mineral, Metals and Materials Society (TMS), Warrendale, PA, USA, pp. 129-138. ISBN 0873395131

platinum group metals

Benson, M., Bennett, C.R., Harry, J.E., Patel, M.K. and Cross, M. (2000) The recovery mechanism of platinum group metals from catalytic converters in spent automotive exhaust systems. Resources, Conservation and Recycling, 31 (1). pp. 1-7. ISSN 0921-3449 (doi:10.1016/S0921-3449(00)00062-8)

platinum-group metals

Benson, M., Bennett, C.R., Patel, M.K., Harry, J.E. and Cross, M. (2000) Collector-metal behaviour in the recovery of platinum-group metals from catalytic converters. Transactions of the Institute of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy, 109 (1). pp. 6-10. ISSN 0371-9553 (Print), 1743-2855 (Online) (doi:10.1179/mpm.2000.109.1.6)

pneumatic conveyor

Knight, B., Woon, F.L., Patel, M.K. and Petridis, M. (2006) CBR-conveyor: Solving the inverse and constraint problems to assist the design of pneumatic conveyors. In: Proceedings of the 5th International Conference on Engineering Computational Technology. Civil-Comp Press, Stirlingshire, UK. ISSN 1759-3433 (doi:10.4203/ccp.84.129)

Chapelle, P., Abou-Chakra, H., Christakis, N., Bridle, I., Patel, M.K., Baxter, J., Tuzun, U. and Cross, M. (2004) Numerical predictions of particle degradation in industrial-scale pneumatic conveyors. Powder Technology, 143. pp. 321-330. ISSN 0032-5910 (doi:10.1016/j.powtec.2004.04.024)

pneumatic conveyors

Chapelle, P., Christakis, N., Abou-Chakra, H., Tuzun, U., Bridle, I., Bradley, M.S.A., Patel, M.K. and Cross, M. (2003) Computational modelling of particle degradation in dilute phase pneumatic conveyors. In: Kumar, Vipin, Gavrilova, Marina L., Tan, Chih Jeng Kenneth and L’Ecuyer, Pierre, (eds.) Computational Science and Its Applications - ICCSA 2003. International Conference Montreal, Canada, May 18–21, 2003 Proceedings. Lecture Notes in Computer Science, Part I (2667). Springer, Berlin Heidelberg, pp. 493-502. ISBN 9783540401551 (doi:10.1007/3-540-44839-X_53)

Hanson, R., Allsopp, D., Deng, T., Smith, D., Bradley, M.S.A., Hutchings, I.M. and Patel, M.K. (2002) A model to predict the life of pneumatic conveyor bends. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 216 (3). pp. 143-149. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/095440802320225284)

polymer solutions

Tonry, C.E.H., Patel, M.K., Bailey, C., Desmuliez, M.P.Y. and Yu, W. (2013) Micro-scale modelling challenges in electric field assisted capillarity. In: Proceedings. 12th International Symposium on Distributed Computing and Applications to Business, Engineering & Science. DCABES 2013. IEEE Computer Society. Conference Publishing Services (CPS), Los Alamitos, CA, USA, 40- 43. ISBN 9780769550602 (doi:10.1109/DCABES.2013.57)

polymeric channels

Li, H., Yu, W., Zhang, L., Liu, Z., Brown, K.E., Abraham, E., Cargill, S., Tonry, C., Patel, M.K., Bailey, C. and Desmulliez, M.P.Y. (2013) Simulation and modelling of sub-30 nm polymeric channels fabricated by electrostatic induced lithography. RSC Advances, 3 (29). pp. 11839-11845. ISSN 2046-2069 (doi:10.1039/c3ra40188j)

post-flashover

Jia, F., Galea, E.R. and Patel, M.K. (1999) The numerical simulation of noncharring thermal degradation and its application to the prediction of compartment fire development. In: Fire Safety Science: Proceedings of the Sixth International Symposium. IAFSS Symposiums (6). International Association for Fire Safety Science, Greenwich, London, UK, pp. 953-964. ISBN 0925223255 (doi:10.3801/IAFSS.FSS.6-953)

printed circuit board (PCB)

Costello, S., Strusevich, N., Patel, M.K., Bailey, C., Flynn, D., Kay, R.W., Price, D., Bennett, M., Jones, A.C., Habeshaw, R., Demore, C., Cochran, S. and Desmulliez, M.P.Y. (2011) Characterisation of ion transportation during electroplating of high aspect ratio microvias using megasonic agitation. In: EMPC-2011: 18th European Microelectronics and Packaging Conference. Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 1-7. ISBN 9780956808606

pyrolysis

Jia, F., Galea, E.R. and Patel, M.K. (1999) The numerical simulation of the noncharring pyrolysis process and fire development within a compartment. Applied Mathematical Modelling, 23 (8). pp. 587-607. ISSN 0307-904X (doi:10.1016/S0307-904X(99)00003-7)

Jia, F., Galea, E.R. and Patel, M.K. (1999) The numerical simulation of noncharring thermal degradation and its application to the prediction of compartment fire development. In: Fire Safety Science: Proceedings of the Sixth International Symposium. IAFSS Symposiums (6). International Association for Fire Safety Science, Greenwich, London, UK, pp. 953-964. ISBN 0925223255 (doi:10.3801/IAFSS.FSS.6-953)

Jia, F., Galea, E.R. and Patel, M.K. (1997) The prediction of fire propagation in enclosure fires. In: Fire Safety Science: Proceedings of the fifth international symposium. International Association for Fire Safety Science, Greenwich, London, pp. 439-450. ISBN 4990062555 ISSN 1817-4299 (doi:10.3801/IAFSS.FSS.5-439)

pyrolysis model

Jia, F., Galea, E.R. and Patel, M.K. (1999) Numerical simulation of the mass loss process in pyrolizing char materials. Fire and Materials, 23 (2). pp. 71-78. ISSN 0308-0501 (Print), 1099-1018 (Online) (doi:10.1002/(SICI)1099-1018(199903/04)23:2<71::AID-FAM672>3.0.CO;2-5)

pyrolysis modelling

Jia, F., Galea, E.R, and Patel, M.K. (2000) The numerical simulation of compartment fires using an integrated gas and solid phase combustion model. In: ACME '2000 The 8th Annual Conference of the Association for Computational Mechanics in Engineering. Extended Abstracts. University of Greenwich, Greenwich, London, UK, pp. 50-53. ISBN 1861661509

Jia, F., Galea, E.R. and Patel, M.K. (1999) The numerical simulation of fire spread within a compartment using an integrated gas and solid phase combustion model. Journal of Applied Fire Science, 8 (4). pp. 327-352. ISSN 1044-4300 (Print), 1541-4183 (Online) (doi:10.2190/UY41-W38Q-X6KK-TXYV)

pyrometallurgical process

Benson, M., Bennett, C.R., Patel, M.K., Harry, J.E. and Cross, M. (2000) Collector-metal behaviour in the recovery of platinum-group metals from catalytic converters. Transactions of the Institute of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy, 109 (1). pp. 6-10. ISSN 0371-9553 (Print), 1743-2855 (Online) (doi:10.1179/mpm.2000.109.1.6)

recovery mechanism

Benson, M., Bennett, C.R., Harry, J.E., Patel, M.K. and Cross, M. (2000) The recovery mechanism of platinum group metals from catalytic converters in spent automotive exhaust systems. Resources, Conservation and Recycling, 31 (1). pp. 1-7. ISSN 0921-3449 (doi:10.1016/S0921-3449(00)00062-8)

remote location

Wang, Z., Jia, F., Galea, E.R. and Patel, M.K. (2010) Predicting toxic gas concentrations at locations remote from the fire source. Fire and Materials, 35 (7). pp. 505-526. ISSN 0308-0501 (Print), 1099-1018 (Online) (doi:10.1002/fam.1069)

segregation

Christakis, N., Chapelle, P. and Patel, M.K. (2006) A computational study of segregation in granular material during heaping. In: 2006 Spring Meeting & 2nd Global Congress on Process Safety. American Institute of Chemical Engineers, New York, USA. ISBN 9780816910755

Chapelle, P., Christakis, N., Wang, J., Strusevich, N., Patel, M.K., Cross, M., Abou-Chakra, H., Baxter, J. and Tuzun, U. (2005) Application of simulation technologies in the analysis of granular material behaviour during transport and storage. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 219 (1). pp. 43-52. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/095440805X7044)

self-organising map

Kao, D., Graham, D., Knight, B., Pericleous, K. and Patel, M.K. (2006) Identifying the damage mechanisms in paper using the acoustic emission monitoring technique. In: Proceedings of the 5th International Conference on Engineering Computational Technology. Civil-Comp Proceedings, 47 (84). Civil-Comp Press Ltd., Stirling, UK. ISBN 1905088116 ISSN 1759-3433 (doi:10.4203/ccp.84.47)

shock capture

Patel, M.K., Pericleous, K.A. and Baldwin, S. (1995) The development of a structured mesh grid adaption technique for resolving shock discontinuities in upwind Navier-Stokes codes. International Journal for Numerical Methods in Fluids, 20 (10). pp. 1179-1197. ISSN 0271-2091 (Print), 1097-0363 (Online) (doi:10.1002/fld.1650201006)

simulation

Christakis, N., Wang, J., Patel, M.K., Bradley, M.S.A., Leaper, M.C. and Cross, M. (2006) Aggregation and caking processes of granular materials: continuum model and numerical simulation with application to sugar. Advanced Powder Technology, 17 (5). pp. 543-565. ISSN 0921-8831 (doi:10.1163/156855206778440480)

SMARTFIRE

Jia, F., Patel, M.K. and Galea, E.R. (2004) Simulating the Swissair flight 111 in-flight fire using the CFD fire simulation software SMARTFIRE. In: Fourth Triennial International Fire and Cabin Safety Research Conference, 15–19 Nov 2004, Lisbon, Portugal.

Ewer, J.A.C., Galea, E.R., Patel, M.K. and Knight, B. (2000) The development of group solvers in the SMARTFIRE fire field model. In: ACME '2000 The 8th Annual Conference of the Association for Computational Mechanics in Engineering. Extended Abstracts. University of Greenwich, Greenwich, London, UK, pp. 54-57. ISBN 1861661509

Ewer, J.A.C., Galea, E.R., Patel, M.K. and Knight, B. (1999) The development and application of group solvers in the SMARTFIRE fire field model. In: Conference Proceedings: Interflam 1999: 8th International Fire Science and Engineering Conference. Interscience Communications Ltd., Greenwich, London, UK, pp. 939-950. ISBN 0953231232

Ewer, J., Galea, E.R., Patel, M.K., Taylor, S., Knight, B. and Petridis, M. (1999) SMARTFIRE: an intelligent CFD based fire model. Journal of Fire Protection Engineering, 10 (1). pp. 13-27. ISSN 1042-3915 (Print), 1532-172X (Online) (doi:10.1177/104239159901000102)

Taylor, S., Galea, E.R., Ewer, J., Patel, M.K., Petridis, M. and Knight, B. (1998) SMARTFIRE: an intelligent CFD-based fire model. CMS Press, Greenwich, London, UK. ISBN 1899991301

solid fuel combustion

Jia, F., Galea, E.R. and Patel, M.K. (1999) The numerical simulation of the noncharring pyrolysis process and fire development within a compartment. Applied Mathematical Modelling, 23 (8). pp. 587-607. ISSN 0307-904X (doi:10.1016/S0307-904X(99)00003-7)

Jia, F., Galea, E.R. and Patel, M.K. (1999) The numerical simulation of noncharring thermal degradation and its application to the prediction of compartment fire development. In: Fire Safety Science: Proceedings of the Sixth International Symposium. IAFSS Symposiums (6). International Association for Fire Safety Science, Greenwich, London, UK, pp. 953-964. ISBN 0925223255 (doi:10.3801/IAFSS.FSS.6-953)

Jia, F., Galea, E.R. and Patel, M.K. (1997) The prediction of fire propagation in enclosure fires. In: Fire Safety Science: Proceedings of the fifth international symposium. International Association for Fire Safety Science, Greenwich, London, pp. 439-450. ISBN 4990062555 ISSN 1817-4299 (doi:10.3801/IAFSS.FSS.5-439)

solid sorbent

Molaei, M., Patel, M.K. and Pericleous, K. (2009) Modelling CO2 capture with a solid sorbent in a carbonation/calcination loop. In: Modelling and Simulationÿ. ACTA Press, Calgary, AB Canada T3E 7J9. ISBN 978-0-88986-798-7 (paperback)

sprinkler systems

Mawhinney, R.N., Galea, E.R. and Patel, M.K. (1996) Fire-sprinkler spray interaction modelling using an Euler-Lagrange approach. In: Conference Proceedings: Interflam '96: Seventh International Fire Science and Engineering Conference. Interscience Communications Ltd., Greenwich, London, UK, pp. 841-845. ISBN 0951632094

surface tension

Tonry, C.E.H., Patel, M.K., Bailey, C., Desmuliez, M.P.Y. and Yu, W. (2013) Micro-scale modelling challenges in electric field assisted capillarity. In: Proceedings. 12th International Symposium on Distributed Computing and Applications to Business, Engineering & Science. DCABES 2013. IEEE Computer Society. Conference Publishing Services (CPS), Los Alamitos, CA, USA, 40- 43. ISBN 9780769550602 (doi:10.1109/DCABES.2013.57)

Swissair

Jia, F., Patel, M.K., Galea, E.R., Grandison, A. and Ewer, J. (2006) CFD fire simulation of the Swissair flight 111 in-flight fire - part II: fire spread analysis. The Aeronautical Journal of the Royal Aeronautical Society, 110 (1107):3069. pp. 303-314. ISSN 0001-9240

Swissair Flight 111

Jia, F., Patel, M.K. and Galea, E.R. (2004) Simulating the Swissair flight 111 in-flight fire using the CFD fire simulation software SMARTFIRE. In: Fourth Triennial International Fire and Cabin Safety Research Conference, 15–19 Nov 2004, Lisbon, Portugal.

thermal radiation modelling

Jia, F., Galea, E.R, and Patel, M.K. (2000) The numerical simulation of compartment fires using an integrated gas and solid phase combustion model. In: ACME '2000 The 8th Annual Conference of the Association for Computational Mechanics in Engineering. Extended Abstracts. University of Greenwich, Greenwich, London, UK, pp. 50-53. ISBN 1861661509

Jia, F., Galea, E.R. and Patel, M.K. (1999) The numerical simulation of fire spread within a compartment using an integrated gas and solid phase combustion model. Journal of Applied Fire Science, 8 (4). pp. 327-352. ISSN 1044-4300 (Print), 1541-4183 (Online) (doi:10.2190/UY41-W38Q-X6KK-TXYV)

thermoelectricity

Kao, A., Pericleous, K., Patel, M.K. and Voller, V. (2009) Effects of magnetic fields on crystal growth. International Journal of Cast Metals Research, 22 (1-4). pp. 147-150. ISSN 1364-0461 (Print), 1743-1336 (Online) (doi:10.1179/136404609X367551)

toxicity

Mahalingam, A., Jia, F., Wang, Z., Patel, M.K. and Galea, E.R. (2011) Numerical investigation of tube furnace toxicity measurement method (ISO 19700). Fire and Materials, 36 (1). pp. 17-30. ISSN 0308-0501 (Print), 1099-1018 (Online) (doi:10.1002/fam.1079)

Wang, Z., Jia, F., Galea, E.R. and Patel, M.K. (2010) Predicting toxic gas concentrations at locations remote from the fire source. Fire and Materials, 35 (7). pp. 505-526. ISSN 0308-0501 (Print), 1099-1018 (Online) (doi:10.1002/fam.1069)

tube furnace

Mahalingam, A., Jia, F., Wang, Z., Patel, M.K. and Galea, E.R. (2011) Numerical investigation of tube furnace toxicity measurement method (ISO 19700). Fire and Materials, 36 (1). pp. 17-30. ISSN 0308-0501 (Print), 1099-1018 (Online) (doi:10.1002/fam.1079)

undercooling

Kao, A., Pericleous, K., Patel, M.K. and Voller, V. (2009) Effects of magnetic fields on crystal growth. International Journal of Cast Metals Research, 22 (1-4). pp. 147-150. ISSN 1364-0461 (Print), 1743-1336 (Online) (doi:10.1179/136404609X367551)

validation

Wang, Z., Jia, F., Galea, E.R., Patel, M.K. and Ewer, J. (2001) Simulating one of the CIB W14 round robin test cases using the SMARTFIRE fire field model. Fire Safety Journal, 36 (7). pp. 661-677. ISSN 0379-7112 (doi:10.1016/S0379-7112(01)00018-2)

verification

Wang, Z., Jia, F., Galea, E.R., Patel, M.K. and Ewer, J. (2001) Simulating one of the CIB W14 round robin test cases using the SMARTFIRE fire field model. Fire Safety Journal, 36 (7). pp. 661-677. ISSN 0379-7112 (doi:10.1016/S0379-7112(01)00018-2)

water misting systems

Mawhinney, R.N., Grandison, A.J., Galea, E.R., Patel, M.K. and Ewer, J. (2000) The development of a CFD based simulator for water mist suppression systems: the development of the fire submodel. Journal of Applied Fire Science, 9 (4). pp. 311-345. ISSN 1044-4300 (Print), 1541-4183 (Online) (doi:10.2190/L07V-KGDD-KUPJ-D397)

This list was generated on Thu Apr 19 19:31:30 2018 BST.