Article

Abdallah, Yasser ORCID: 0000-0001-5425-7598 , Shehab, Essam and Al-Ashaab, Ahmed (2022) Developing a digital transformation process in the manufacturing sector: Egyptian case study. Information Systems and e-Business Management, 20. pp. 613-630. ISSN 1617-9846 (Print), 1617-9854 (Online) (doi:https://doi.org/10.1007/s10257-022-00558-3)

Ali, Ahsen, Younas, Muhammad, Khan, Mushtaq, Jaffery, Syed Husain Imran and Khan, Zarak ORCID: 0000-0002-2135-1948 (2024) Machinability performance of single coated and multicoated carbide tools during turning Ti6Al4V alloy. International Journal of Precision Engineering and Manufacturing. ISSN 2234-7593 (Print), 2005-4602 (Online) (doi:https://doi.org/10.1007/s12541-024-01147-9)

Anthony, Richard, Chen, DeJiu, Pelc, Mariusz, Persson, Magnus and Tӧrngren, Martin (2009) Context-aware adaptation in DySCAS. Electronic Communications of the EASST, 19. ISSN 1863-2122

Arokiam, A. C., Barashev, A. V., Bacon, D. J. and Osetsky, Y. N. (2007) Atomic-scale computer simulation study of the interaction of Cu-rich precipitates with irradiation-produced defects in α-Fe. Philosophical Magazine, 87 (6). pp. 925-943. ISSN 1478–6435 (Print), 1478–6443 (Online) (doi:https://doi.org/10.1080/14786430601003908)

Arokiam, A. C., Barashev, A. V., Bacon, D. J. and Osetsky, Yu. N. (2006) Characteristics of the interaction of Cu-rich precipitates with irradiation-produced defects in α-Fe. Philosophical Magazine Letters, 85 (9). pp. 491-501. ISSN 0950–0839 (Print), 1362–3036 (Online) (doi:https://doi.org/10.1080/09500830500300047)

Arshad, Kamran and Moessner, Klaus (2013) Robust spectrum sensing based on statistical tests. IET Communications, 7 (9). pp. 808-817. ISSN 1751-8628 (doi:https://doi.org/10.1049/iet-com.2012.0499)

Bailey, C. ORCID: 0000-0002-9438-3879 , Clapham, S., Cross, M., Dixon, T., Wolfe, S. and Norman, P. (1996) Modelling stress evolution during cable fabrication. ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 76 (S4). pp. 97-100. ISSN 0044-2267 (Print), 1521-4001 (Online) (doi:https://doi.org/10.1002/zamm.19960761408)

Bailey, C. ORCID: 0000-0002-9438-3879 , Patel, M. and Kumar, S. (2001) Computational modelling-a key component in materials processing. Transactions of the Institution of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy, 110 (1). pp. 25-32. ISSN 0371-9553 (Print), 1743-2855 (Online) (doi:https://doi.org/10.1179/mpm.2001.110.1.25)

Baxter, David, Rajkumar, Roy and Gao, James ORCID: 0000-0001-5625-3654 (2008) Design process knowledge reuse challenges and issues. Computer Aided Design and Applications, 5 (6). pp. 942-952. ISSN 1686-4360 (doi:https://doi.org/10.3722/cadaps.2008.942-952)

Berga, Kitija Kristiāna, Berenis, Didzis, Kalvāns, Matīss, Krastins, Ivars ORCID: 0000-0002-3152-4128 , Beinerts, Toms, Grants, Ilmārs and Bojarevičs, Andris (2022) Model experiment for molten metal temperature homogenization with rotating permanent magnet. JOM Journal of the Minerals, Metals and Materials Society, 74 (6). pp. 2450-2460. ISSN 1047-4838 (Print), 1543-1851 (Online) (doi:https://doi.org/10.1007/s11837-022-05288-y)

Bojarevics, Valdis ORCID: 0000-0002-7326-7748 and Pericleous, Koulis ORCID: 0000-0002-7426-9999 (2003) Modelling electromagnetically levitated liquid droplet oscillations. ISIJ International, 43 (6). pp. 890-898. ISSN 0915-1559 (Print), 1347-5460 (Online) (doi:https://doi.org/10.2355/isijinternational.43.890)

Breit, J., Schmidt, G. and Strusevich, V.A. (2003) Non-preemptive two-machine open shop scheduling with non-availability constraints. Mathematical Methods of Operations Research, 57 (2). pp. 217-234. ISSN 1432-2994 (Print), 1432-5217 (Online) (doi:https://doi.org/10.1007/s001860200267)

Brekis, Arturs, Krastins, Ivars ORCID: 0000-0002-3152-4128 , Pérez Polo, Beatriz, Echeberría, Jon J., Kravalis, Kalvis, Mikanovskis, Oskars, Romančuks, A., Platacis, Ernests, Buligins, Leonids and García-Rosales, Carmen (2023) Hydrodynamics and electrical insulation of PbLi flow with SiC flow channel inserts in a strong magnetic field. Fusion Engineering and Design, 194:113920. ISSN 0920-3796 (Print), 1873-7196 (Online) (doi:https://doi.org/10.1016/j.fusengdes.2023.113920)

Burnett, A. J. (1993) Wear in pneumatic conveying pipelines. Powder Handling and Processing, 15 (2). pp. 123-128. ISSN 0934-7348

Callaghan, Peter and Batchelor, John C. (2008) Multiband low-profile antenna for remote antenna unit picocell applications. IEEE Transactions on Antennas and Propagation, 56 (8). pp. 2475-2480. ISSN 0018-926X (doi:https://doi.org/10.1109/TAP.2008.927558)

Chapelle, Pierre, Abou-Chakra, Hadi, Christakis, Nicholas, Patel, Mayur, Abu-Nahar, Azlina, Tüzün, Ugur and Cross, Mark (2004) Computational model for prediction of particle degradation during dilute phase pneumatic conveying: the use of a laboratory scale degradation tester for the determination of degradation propensity. Advanced Powder Technology, 15 (1). pp. 13-29. ISSN 0921-8831 (doi:https://doi.org/10.1163/15685520460740043)

Chapuis, Arnaud, Lancement, Charlene, Giraldo, Francisco, Precoppe, Marcelo ORCID: 0000-0002-7937-5782 , Moreno, Martin, Dufour, Dominique and Tran, Thierry (2022) Extensive experimental validation of a model for pneumatic drying of cassava starch. Drying Technology, 41 (1). pp. 122-136. ISSN 0737-3937 (Print), 1532-2300 (Online) (doi:https://doi.org/10.1080/07373937.2022.2087668)

Chen, H., Yu, W., Cargill, S., Patel, M.K., Bailey, C. ORCID: 0000-0002-9438-3879 , Tonry, C. and Desmulliez, M.P.Y. (2012) Self-encapsulated hollow microstructures formed by electric field-assisted capillarity. Microfluidics and Nanofluidics, 13 (1). pp. 75-82. ISSN 1613-4982 (Print), 1613-4990 (Online) (doi:https://doi.org/10.1007/s10404-012-0942-6)

D'Angela, Danilo and Ercolino, Marianna ORCID: 0000-0001-8678-0631 (2021) Fatigue crack growth in metallic components: numerical modelling and analytical solution. Structural Engineering and Mechanics, 79 (5). pp. 541-556. ISSN 1225-4568 (Print), 1598-6217 (Online) (doi:https://doi.org/10.12989/sem.2021.79.5.541)

Deng, Tong ORCID: 0000-0003-4117-4317 , Farnish, Richard J. and Bradley, Michael S.A. (2008) Evaluation of particle degradation due to high-speed impacts in a pneumatic handling system. Particulate Science and Technology, 26 (5). pp. 438-450. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:https://doi.org/10.1080/02726350802367522)

Eliasy, Ashkan, Chen, Kai-Jung, Vinciguerra, Riccardo, Maklad, Osama ORCID: 0000-0001-6893-2654 , Vinciguerra, Paolo, Ambrósio, Renato Jr., Roberts, Cynthia J. and Elsheikh, Ahmed (2018) Ex-vivo experimental validation of biomechanically-corrected intraocular pressure measurements on human eyes using the CorVis ST. Experimental eye research, 175. pp. 98-102. ISSN 0014-4835 (doi:https://doi.org/10.1016/j.exer.2018.06.013)

Fernández-Berceruelo's, Iván, Palermo, Iole, Urgorri, Fernando Roca, Rapisarda, David, González, M., Alguacil, Javier, Catalán, J.P., García, Juan Mauricio, Kekrt, Jaroslav, Kordač, Michal, Krastins, Ivars ORCID: 0000-0002-3152-4128 , Melichar, Tomáš, Noguerón, J.Á., Platacis, Erik, Petráš, Roman, Roldán, Marcelo, Rueda, Almudena, Serna, J., Sosa, David and Suàrez, Daniel (2024) Progress in design and experimental activities for the development of an advanced breeding blanket. Nuclear Fusion, 64 (5):056029. ISSN 0029-5515 (Print), 1741-4326 (Online) (doi:https://doi.org/10.1088/1741-4326/ad37ca)

Gard Timmerfors, Jessica, Salehi Kahrizsangi, Hamid ORCID: 0000-0002-2516-6619 , Larsson, Sylvia, Sjölund, Torbjörn and Jönsson, Leif (2021) The impact of using different wood qualities and wood species on chips produced using a novel type of pilot drum chipper. Nordic Pulp & Paper Research Journal, 36 (2). pp. 214-226. ISSN 0283-2631 (Print), 2000-0669 (Online) (doi:https://doi.org/10.1515/npprj-2019-0096)

Gilvari, Hamid, van Battum, H, Farnish, Richard, Pang, Yusong, de Jong, Wiebren and Schott, Digena (2021) Fragmentation of fuel pellets during transport via a belt conveyor: a design of experiment study. Particuology, 66. pp. 29-37. ISSN 1674-2001 (doi:https://doi.org/10.1016/j.partic.2021.08.007)

Gladky, A.A., Shafransky, Y.M. and Strusevich, V.A. (2004) Flow shop scheduling problems under machine–dependent precedence constraints. Journal of Combinatorial Optimization, 8 (1). pp. 13-28. ISSN 1382-6905 (Print), 1573-2886 (Online) (doi:https://doi.org/10.1023/B:JOCO.0000021935.66577.09)

Gradin, P.A., Graham, D., Nygård, P. and Vallen, H. (2007) The use of acoustic emission monitoring to rank paper materials with respect to their fracture toughness. Experimental Mechanics, 48 (1). pp. 133-137. ISSN 0014-4851 (Print), 1741-2765 (Online) (doi:https://doi.org/10.1007/s11340-007-9055-7)

Grandaos-Ortiz, Francisco-Javier, Lopez-Martinez, Alejandro, Molina-Aiz, Francisco Domingo, Lai, Choi-Hong ORCID: 0000-0002-7558-6398 , Pena-Fernandez, Araceli, Martinez-Lao, Juan Antonio and Valera-Martinez, Diego Luis (2023) Improvements in the characterization of permeability and inertial factor of insect-proof screens through pressure drop coefficients. Agronomy, 13 (2):602. pp. 1-15. ISSN 2073-4395 (Online) (doi:https://doi.org/10.3390/agronomy13020602)

Hanson, R., Allsopp, D., Deng, T. ORCID: 0000-0003-4117-4317 , Smith, D., Bradley, M.S.A., Hutchings, I.M. and Patel, M.K. (2002) A model to predict the life of pneumatic conveyor bends. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 216 (3). pp. 143-149. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:https://doi.org/10.1243/095440802320225284)

Hinduja, S., Mansor, M.S.A. and Owodunni, O.O. (2010) Voronoi-diagram-based linking of contour-parallel tool paths for two-and-a-half-dimensional closed-pocket machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (9). pp. 1329-1350. ISSN 0954-4054 (Print), 2041-2975 (Online) (doi:https://doi.org/10.1243/09544054JEM1596)

Huang, Rongjie, Ma, Yaoshuai, Li, Hao, Sun, Chunya, Liu, Jun, Zhang, Shuai ORCID: 0000-0002-9796-058X , Wang, Haoqi and Hao, Bing (2023) Operation parameters multi-objective optimization method of large vertical mill based on CFD-DPM. Advanced Powder Technology, 34 (6):104014. pp. 1-14. ISSN 0921-8831 (Print), 1568-5527 (Online) (doi:https://doi.org/10.1016/j.apt.2023.104014)

Hughes, Michael, Taylor, Gareth A. and Pericleous, Koulis ORCID: 0000-0002-7426-9999 (2000) Thermocapillary and magnetohydrodynamic effects in modelling the thermodynamics of stationary welding processes. Phoenics Journal of Computational Fluid Dynamics and Its Applications, 13 (1). pp. 99-113. ISSN 0969-8248

Kao, A. ORCID: 0000-0002-6430-2134 and Pericleous, K. ORCID: 0000-0002-7426-9999 (2012) The effect of secondary arm growth on thermoelectric magnetohydrodynamics. Magnetohydrodynamics, 48 (2). pp. 361-370. ISSN 0024-998X

Kao, A. ORCID: 0000-0002-6430-2134 and Pericleous, K. ORCID: 0000-0002-7426-9999 (2012) A multi scale method for thermo-electric MHD in dendritic solidification. Journal of Iron and Steel International, 19 (S1-1). pp. 317-321. ISSN 1006-706X

Kelleler, H. and Strusevich, V.A. (2003) Scheduling problems for parallel dedicated machines under multiple resource constraints. Discrete Applied Mathematics, 133 (1-3). pp. 45-68. ISSN 0166-218X (doi:https://doi.org/10.1016/S0166-218X(03)00433-5)

Kogbara, Reginald ORCID: 0000-0002-0227-4676 , Seong, Myungjin, Zollinger, Dan G., Iyengar, Srinath R., Grasley, Zachary C. and Masad, Eyad A. (2020) Insights from bond-slip investigations in different reinforced concrete mixtures for LNG containment. Case Studies in Thermal Engineering, 23:100812. pp. 1-9. ISSN 2214-157X (doi:https://doi.org/10.1016/j.csite.2020.100812)

Kovalyov, M.Y., Potts, C.N. and Strusevich, V.A. (2003) Batching decisions for assembly production systems. European Journal of Operational Research, 157 (3). pp. 620-642. ISSN 0377-2217 (doi:https://doi.org/10.1016/S0377-2217(03)00250-9)

Kubzin, Mikhail A. and Strusevich, Vitaly A. (2004) Two-machine flowshop scheduling problems with no-wait jobs. Naval Research Logistics, 51 (4). pp. 613-631. ISSN 0894-069X (Print), 1520-6750 (Online) (doi:https://doi.org/10.1002/nav.10118)

Kumar, Santosh, Mallik, Sabuj, Ekere, Ndy and Jung, Jaepil (2013) Stencil Printing Behavior of Lead-Free Sn-3Ag-0.5Cu Solder Paste for Wafer Level Bumping for Sub-100 μm Size Solder Bumps. Metals and Materials International, 19 (5). pp. 1083-1090. ISSN 1598-9623 (Print), 2005-4149 (Online) (doi:https://doi.org/10.1007/s12540-013-5025-z)

Li, Yingguang, Liu, Changqing and Gao, James ORCID: 0000-0001-5625-3654 (2018) Spcial issue on Digital Enterprise Technologies in Manufacturing. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232 (13). pp. 2251-2252. ISSN 0954-4054 (Print), 2041-2975 (Online) (doi:https://doi.org/10.1177/0954405418774602)

Li, Yingguang, Liu, Changqing, Hao, Xiaozhong, Gao, James X. ORCID: 0000-0001-5625-3654 and Maropoulos, Paul G. (2015) Responsive fixture design using dynamic product inspection and monitoring technologies for the precision machining of large-scale aerospace parts. CIRP Annals - Manufacturing Technology, 64 (1). pp. 173-176. ISSN 0007-8506 (doi:https://doi.org/10.1016/j.cirp.2015.04.025)

Lin, Junyi, Zhou, Li ORCID: 0000-0001-7132-5935 , Spiegler, Virginia L.M, Naim, Mohamed M. and Syntetos, Aris (2021) Push or pull? The impact of ordering policy choice on the dynamics of a hybrid closed-loop supply chain. European Journal of Operational Research, 300 (1). pp. 282-295. ISSN 0377-2217 (doi:https://doi.org/10.1016/j.ejor.2021.10.031)

Lu, Hua ORCID: 0000-0002-4392-6562 , Bailey, C. ORCID: 0000-0002-9438-3879 and Cross, M. (2000) Reliability analysis of flip chip designs via computer simulation. Journal of Electronic Packaging, 122 (3). pp. 214-219. ISSN 1528-9044 (Print), 1043-7398 (Online) (doi:https://doi.org/10.1115/1.1286122)

Maklad, Osama ORCID: 0000-0001-6893-2654 , Eliasy, Ashkan, Chen, Kai-Jung, Theofilis, Vassilios and Elsheikh, Ahmed (2019) Simulation of air puff tonometry test using Arbitrary Lagrangian-Eulerian (ALE) deforming mesh for corneal material characterisation. International Journal of Environmental Research and Public Health, 17 (1):54. ISSN 1661-7827 (Print), 1660-4601 (Online) (doi:https://doi.org/10.3390/IJERPH17010054)

Maklad, Osama ORCID: 0000-0001-6893-2654 , Eliasy, Ashkan, Chen, Kai-Jung, Wang, Jun Jie, Abass, Ahmed, Teixeira Lopes, Bernardo, Theofilis, Vassilis and Elsheikh, Ahmed (2020) Fluid-structure interaction based algorithms for IOP and corneal material behavior. Frontiers in Bioengineering and Biotechnology, 8:970. ISSN 2296-4185 (Online) (doi:https://doi.org/10.3389/fbioe.2020.00970)

Maklad, Osama ORCID: 0000-0001-6893-2654 and Poole, R.J. (2021) A review of the second normal-stress difference; its importance in various flows, measurement techniques, results for various complex fluids and theoretical predictions. Journal of Non-Newtonian Fluid Mechanics, 292:104522. ISSN 0377-0257 (doi:https://doi.org/10.1016/J.JNNFM.2021.104522)

Mallik, Sabuj, Chan, Erica Hiu Laam and Ekere, Ndy (2012) Nonlinear Viscoelastic Characteristics of Sn-Ag-Cu Solder Pastes Used in Electronics Assembly Applications. Journal of Materials Engineering and Performance, 22 (4). pp. 1186-1193. ISSN 1059-9495 (Print), 1544-1024 (Online) (doi:https://doi.org/10.1007/s11665-012-0360-7)

Massaro Sousa, Lucas ORCID: 0000-0002-4182-9347 , Amblard, Benjamin, Montjovet, Florian and Tebianian, Sina (2021) Characterization of a pressurized feeder for biomass injection into gas-solid systems. Chemical Engineering Research and Design, 175. pp. 171-181. ISSN 0263-8762 (doi:https://doi.org/10.1016/j.cherd.2021.08.024)

Massaro Sousa, Lucas ORCID: 0000-0002-4182-9347 , do Carmo Ferreira, Maria, Hou, Qinfu and Yu, Aibing (2020) Feeding spent coffee grounds into reactors: TFM simulation of a non-mechanical spouted bed type feeder. Waste Management, 109. pp. 161-170. ISSN 0956-053X (doi:https://doi.org/10.1016/j.wasman.2020.04.056)

Milgravis, Mikus, Krastins, Ivars ORCID: 0000-0002-3152-4128 , Kaldre, Imants, Kalvans, Matiss, Bojarevics, Andris and Beinerts, Toms (2023) Pulsed and static magnetic field influence on metallic alloys during solidification. Crystals, 13 (2):259. ISSN 2073-4352 (Online) (doi:https://doi.org/10.3390/cryst13020259)

My, Chu A., Bien, Duong X., Le, Chi Hieu ORCID: 0000-0002-5168-2297 and Packianather, Michael (2019) An efficient finite element formulation of dynamics for a flexible robot with different type of joints. Mechanism and Machine Theory, 134. pp. 267-288. ISSN 0094-114X (Print), 1873-3999 (Online) (doi:https://doi.org/10.1016/j.mechmachtheory.2018.12.026)

Nikoluškins, Raimonds, Kaldre, Imants, Milgrāvis, Mikus, Krastins, Ivars ORCID: 0000-0002-3152-4128 , Beinerts, Toms, Kalvāns, Matīss and Bojarevičs, Andris (2023) Directional solidification of A356 aluminium alloy under the interaction of DC magnetic field and electric current. Magnetohydrodynamics, 59 (1). pp. 95-112. ISSN 0024-998X (Print), 1574-0579 (Online) (doi:https://doi.org/10.22364/mhd.59.1.8)

Panaitescu, Ileana, Repetto, Maurizio, Leboucher, Laurent and Pericleous, Kyriacos ORCID: 0000-0002-7426-9999 (2000) Magneto-hydro-dynamic analysis of an electrolysis cell for aluminum production. IEEE Transactions on Magnetics, 36 (4). pp. 1305-1308. ISSN 0018-9464 (doi:https://doi.org/10.1109/20.877679)

Phillips, T.N. and Williams, A.J. (2002) Comparison of creeping and inertial flow of an Oldroyd B fluid through planar and axisymmetric contractions. Journal of Non-Newtonian Fluid Mechanics, 108 (1-3). pp. 25-47. ISSN 0377-0257 (doi:https://doi.org/10.1016/S0377-0257(02)00123-4)

Poliakoff, Ellen, O’Kane, Sophie, Carefoot, Olivia, Kyberd, J ORCID: 0000-0001-9022-6748 and Gowen, Emma (2018) Investigating the Uncanny Valley for prosthetic hands. Prosthetics and Orthotics International, 42 (1). pp. 21-27. ISSN 0309-3646 (doi:https://doi.org/10.1177/039364617744083)

Potts, C.N., Strusevich, V.A. and Tautenhahn, T. (2001) Scheduling batches with simultaneous job processing for two-machine shop problems. Journal of Scheduling, 4 (1). pp. 25-51. ISSN 1094-6136 (Print), 1099-1425 (Online) (doi:https://doi.org/10.1002/1099-1425(200101/02)4:1<25::AID-JOS58>3.0.CO;2-7)

Rojas-Rojas, Laura ORCID: 0000-0002-1096-7659 , Tozzi, Gianluca and Guillén-Girón, Teodolito ORCID: 0000-0003-1823-3403 (2023) A comprehensive mechanical characterization of subject-specific 3D printed scaffolds mimicking trabecular bone architecture biomechanics. Life, 13 (11):2141. pp. 1-14. ISSN 2075-1729 (Online) (doi:https://doi.org/10.3390/life13112141)

Schuster, T., Bradley, M.S.A. and Reed, Alan R. (1995) The dependence of power consumption of pneumatic conveying systems upon bulk material properties, pipeline bore and routing, and mode of flow. Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering, 209 (E1). pp. 69-75. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:https://doi.org/10.1243/PIME_PROC_1995_209_230_02)

Shakhlevich, Natalia V., Sotskov, Yuri N. and Werner, Frank (2000) Complexity of mixed shop scheduling problems: A survey. European Journal of Operational Research, 120. pp. 343-351. ISSN 0377-2217 (doi:https://doi.org/10.1016/S0377-2217(99)00161-7)

Skarvelis-Kazakos, Spyros, Rikos, Evangelos, Kolentini, Efstathia, Cipcigan, Liana M. and Jenkins, Nick (2013) Implementing agent-based emissions trading for controlling Virtual Power Plant emissions. Electric Power Systems Research, 102. ISSN 0378-7796 (doi:https://doi.org/10.1016/j.epsr.2013.04.004)

Strusevich, V.A. (2000) Group technology approach to the open shop scheduling problem with batch setup times. Operations Research Letters, 26 (4). pp. 181-192. ISSN 0167-6377 (doi:https://doi.org/10.1016/S0167-6377(00)00021-3)

Sutharssan, Thamo, Stoyanov, Stoyan ORCID: 0000-0001-6091-1226 , Bailey, Christopher ORCID: 0000-0002-9438-3879 and Rosunally, Yasmine (2012) Prognostics and health monitoring of high power LED. Micromachines, 3 (1). pp. 78-100. ISSN 2072-666X (doi:https://doi.org/10.3390/mi3010078)

Trinh, Xuan Hiep, Chu, Anh My, Phung, Van Binh and Le, Chi Hieu ORCID: 0000-0002-5168-2297 (2023) Innovative development of a soft robotic gripper: mathematical modeling and grasping capability analysis. Mechanics Based Design of Structures and Machines, An International Journal. pp. 1-28. ISSN 1539-7734 (Print), 1539-7742 (Online) (doi:https://doi.org/10.1080/15397734.2023.2242919)

White, Rory, Gokce, Tansu, Oddbjornsson, Olafur, Bourne, Kate, Crewe, Adam, Dihoru, Luiza, Horseman, Tony, Dietz, Matthew, Kloukinas, Panos ORCID: 0000-0002-5158-3109 and Taylor, Colin (2021) A mathematical framework for evaluation of column shape profiles for an advanced gas-cooled reactor core model subject to seismic excitation. Nuclear Engineering and Design, 391:111735. ISSN 0029-5493 (doi:https://doi.org/10.1016/j.nucengdes.2022.111735)

Williams, A.J., Croft, T.N. and Cross, M. (2003) Modeling of ingot development during the start-up phase of direct chill casting. Metallurgical and Materials Transactions B, 34 (5). pp. 727-734. ISSN 1073-5615 (Print), 1543-1916 (Online) (doi:https://doi.org/10.1007/s11663-003-0042-9)

Woon, Fei Ling, Knight, Brian, Petridis, Miltos and Ward, Graham (2002) A case based model to assist in the design process in the manufacture of furniture products. Expert Update - The Specialist Group on Artificial intelligence, 5 (2). pp. 37-43. ISSN 1465-4091

Yin, Chunyan ORCID: 0000-0003-0298-0420 , Lu, Hua ORCID: 0000-0002-4392-6562 , Bailey, Chris ORCID: 0000-0002-9438-3879 and Chan, Yan-Cheong (2004) Effects of solder reflow on the reliability of flip-chip on flex interconnections using anisotropic conductive adhesives. IEEE Transactions on Electronics Packaging Manufacturing, 27 (4). pp. 254-259. ISSN 1521-334X (doi:https://doi.org/10.1109/TEPM.2004.843152)

Zhao, Zhiwei, Liu, Changqing, Li, Yingguang and Gao, Xiaoyu ORCID: 0000-0001-5625-3654 (2022) A new method for inferencing and representing workpiece residual stress field using monitored deformation force data. Engineering, 22. pp. 49-59. ISSN 2095-8099 (Print), 2096-0026 (Online) (doi:https://doi.org/10.1016/j.eng.2022.07.018)

Book Section

Anh My, Chu, Cong Dinh, Nguyen, Quoc Hung, Truong, Hoang Hung, Pham, The Nguyen, Nguyen, Van Luu, Dao, Xuan Bien, Duong, Minh Duc, Vu and Le, Chi Hieu ORCID: 0000-0002-5168-2297 (2021) General approach for parameterization of the inverse dynamic equation for industrial robot and 5-axis CNC machine. In: Khang, N.V.,, Hoang, N.Q. and Ceccarelli, Marco, (eds.) Advances in Asian Mechanism and Machine Science. ASIAN MMS 2021. Mechanisms and Machine Science. Mechanisms and Machine Science, 113 . Springer Nature, Cham, Switzerland, pp. 433-442. ISBN 9783030918927 (doi:https://doi.org/10.1007/978-3-030-91892-7_41)

Baeghbali, Vahid ORCID: 0000-0001-5054-6747 , Hedayati, Sara and Jafari, Seid Mahdi (2022) Storage vats, vessels, and tanks. In: Jafari, Seid Mahdi and Malekjani, Narjes, (eds.) Transporting Operations of Food Materials Within Food Factories: Unit Operations and Processing Equipment in the Food Industry. Elsevier Science - Woodhead Publishing - Nikki P. Levy, Cambridge, MA; Kidlington, UK, pp. 15-30. ISBN 978-0128185858; 978-0128197059; 0128185856 (doi:https://doi.org/10.1016/B978-0-12-818585-8.00012-X)

Bradley, M. S. A., Burnett, A. J. and Woodhead, S. R. (1995) Measurement of pressure profiles in pneumatic conveying pipelines. Instrumentation and Measurement Technology Conference, 1995. IMTC/95. Proceedings. Integrating Intelligent Instrumentation and Control., IEEE. Institute of Electrical and Electronics Engineers, New York, pp. 766-769. ISBN 978-0780326156 (doi:https://doi.org/10.1109/IMTC.1995.515419)

Chu, Anh My, Duong, Xuan Bien, Trinh, Xuan Hiep, Nguyen, Cong Dinh, Vu, Minh Duc, Nguyen, The Nguyen, Le, Chi Hieu ORCID: 0000-0002-5168-2297 and Alandoli, Esmail Ali (2023) A review of mathematical methods for flexible robot dynamics modeling and simulation. In: Nguyen, Thi Dieu Linh and Lu, Joan, (eds.) Machine Learning and Mechanics Based Soft Computing Applications. Studies in Computational Intelligence (SCI), 1068 . Springer, Singapore, pp. 229-240. ISBN 978-9811964497; 978-9811964503 (doi:https://doi.org/10.1007/978-981-19-6450-3_22)

Fei, Genyuan, Gao, James ORCID: 0000-0001-5625-3654 , Owodunni, Oladele and Tang, X. Q. (2009) A methodology for engineering design change management using modelling and problem solving techniques. In: Hinduja, Srichand and Li, Lin, (eds.) Proceedings of the 36th International MATADOR Conference. Springer, US, pp. 179-182. ISBN 978-1-84996-432-6_41 (doi:https://doi.org/10.1007/978-1-84996-432-6_41)

Lancelot, Martin, Gao, Xiaoyu ORCID: 0000-0001-5625-3654 , Le, Chi Hieu ORCID: 0000-0002-5168-2297 , Ahmed, Sarhan, Sotia, Cherepeti and Antoine, Sarrazin (2022) Modular, mobile and autonomous robotics for manufacturing SMEs. In: Shafik, Mahmoud and Case, Keith, (eds.) Advances in Manufacturing Technology XXXV: Proceedings of the 19th International Conference on Manufacturing Research, Incorporating the 36th National Conference on Manufacturing Research, 6–8 September 2022, University of Derby, Derby, UK. Advances in Manufacturing Technology, 25 . IOS Press, Amsterdam; Berlin; Washington, DC, pp. 101-106. ISBN 978-1643683300; 978-1643683317 (doi:https://doi.org/10.3233/ATDE220574)

Malik, Asif, Hughes, Michael and Bailey, Christopher ORCID: 0000-0002-9438-3879 (2006) Optoelectronic packaging interfaces for submicron alignment (OPISA) and the dynamics of laser spot weld formation. Proceedings of the 1st Electronics Systemintegration Technology Conference, 2006. IEEE, pp. 387-391. ISBN 1 4244 0552 1 (doi:https://doi.org/10.1109/ESTC.2006.280031)

Mileman, Tony, Knight, Brian, Petridis, Miltos, Preddy, Keith and Mejasson, Patrick (2000) Maintenance of a case-base for the retrieval of rotationally symmetric shapes for the design of metal castings. In: Blanzieri, Enrico and Portinale, Luigi, (eds.) Advances in Case-Based Reasoning: 5th European Workshop, EWCBR 2000 Trento, Italy, September 6–9, 2000 Proceedings. Lecture Notes in Computer Science: Lecture Notes in Artificial Intelligence (1898). Springer Berlin Heidelberg, Berlin, Heidelberg, Germany, pp. 418-430. ISBN 9783540679332 ISSN 0302-9743 (doi:https://doi.org/10.1007/3-540-44527-7_36)

Mountney, Sara, Roy, Rajkumar and Gao, James ORCID: 0000-0001-5625-3654 (2011) Acquiring innovative manufacturing engineering knowledge for the preliminary design of complex mechanical components. In: Bernard, Alain, (ed.) Global Product Development. Springer, Berlin / Heidelberg, pp. 457-464. ISBN 978-3-642-15973-2 (doi:https://doi.org/10.1007/978-3-642-15973-2_46)

Nguyen, Van Duy, Pham, Tri Cong, Le, Chi Hieu ORCID: 0000-0002-5168-2297 , Huynh, Thanh Trung, Le, Tan Hung and Packianather, Michael (2023) An innovative and smart agriculture platform for improving the coffee value chain and supply chain. In: Nguyen, Thi Dieu Linh and Lu, Joan, (eds.) Machine Learning and Mechanics Based Soft Computing Applications. Studies in Computational Intelligence (SCI), 1068 . Springer, Singapore, pp. 185-197. ISBN 978-9811964497; 978-9811964503 (doi:https://doi.org/10.1007/978-981-19-6450-3_19)

Pericleous, Koulis A. ORCID: 0000-0002-7426-9999 , Djambazov, G. ORCID: 0000-0001-8812-1269 and Wang, Hong (2006) Numerical modelling of the low-superheat casting of thin-section components. In: Gandin, Charles-André and Bellet, Michel, (eds.) Modeling of casting, welding, and advanced solidification XI : proceedings from the Eleventh International Conference on Modelling of Casting, Welding and Advanced Solidification Processes. TMS - The Minerals Metals and Materials Society, Warrendale, Pennsylvania, USA. ISBN 9780873396295

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2020) Developing an innovative press to solve a cassava processing bottleneck. In: Summers, Gillian and Martin, Adrienne ORCID: 0000-0001-9305-7302 , (eds.) Natural Resources Institute Annual Review 2019-2020. NRI Annual Review . Natural Resources Institute, University of Greenwich, London, University of Greenwich, p. 14.

Ridout, Stephen, Bailey, Christopher ORCID: 0000-0002-9438-3879 , Dusek, Milos and Hunt, C (2007) Constitutive modeling of kinematic-hardening and damage in solder joints. Proceedings of the 1st Electronics Systemintegration Technology Conference, 2006. IEEE, pp. 927-933. ISBN 1-4244-0552-1 (doi:https://doi.org/10.1109/ESTC.2006.280122)

Sahatoo, Divesh, Chowdary, Boppana V., Ali, Fahraz F. and Bhatti, Rajinderpal (2008) Slicing issues in CAD translation to STL in rapid prototyping. Proceedings of The 2008 IAJC-IJME International Conference. International Association of Journals and Conferences/International Journal of Modern Engineering, California State University, Northridge. ISBN 9781606433799

Soper, Alan ORCID: 0000-0002-0901-9803 and Strusevich, Vitaly A. (2006) Two-machine flow shop scheduling with an interstage transporter: two shipments. In: Dolgui, Alexandre, Morel, Gerard and Pereira, Carlos Eduardo, (eds.) Information Control Problems in Manufacturing 2006: A Proceedings volume from the 12th IFAC International Symposium, St Etienne, France, 17-19 May 2006. IFAC Proceedings Volumes, 3 . Elsevier Ltd., Oxford, UK, pp. 27-32. ISBN 978-0-08-044654-7

Tran, Tuan Anh, Nguyen, Thanh Tan, Dinh, Than Le, Le, Chi Hieu ORCID: 0000-0002-5168-2297 , Mahmud, Jamaluddin, Latif, Mohd Juzaila Abd and Nguyen, Ho Quang (2023) Digital twins of robotic systems: increasing capability for industrial applications. In: Nguyen, Thi Dieu Linh and Lu, Joan, (eds.) Machine Learning and Mechanics Based Soft Computing Applications. Studies in Computational Intelligence (SCI), 1068 . Springer, Singapore, pp. 241-258. ISBN 978-9811964497; 978-9811964503 (doi:https://doi.org/10.1007/978-981-19-6450-3_23)

Conference Proceedings

Aboubacar, M., Phillips, T.N., Tamaddon-Jahromi, H.R., Webster, M.K. and Williams, A.J. (2002) Numerical Simulation of Contraction Flows for Boger Fluids using Finite Volume Methods. In: Proceedings of the 6th European Conference of Rheology, (eurheo 2002). LSP, Institute of Polymer Materials, Erlangen-Nuremberg, Germany, pp. 279-280.

Bailey, Chris ORCID: 0000-0002-9438-3879 , Lu, Hua ORCID: 0000-0002-4392-6562 and Yin, Chunyan ORCID: 0000-0003-0298-0420 (2010) Modelling reliability of power electronics packaging. In: Proceedings of the ASME InterPack Conference 2009, IPACK2009. American Society of Mechanical Engineers, New York, USA, pp. 215-220. ISBN 9780791843604 (doi:https://doi.org/10.1115/InterPACK2009-89430)

Bennett, C.R., Cross, M., Croft, T.N., Uhrie, J., Green, C. and Gebhardt, J. (2003) A comprehensive copper stockpile leach model: background and model formulation. In: Hydrometallurgy 2003. Proceedings of the Fifth International Conference. Honoring Professor Ian M. Ritchie. TMS (The Minerals, Metals & Materials Society), Pennsylvania, USA, pp. 315-328. ISBN 0873395549

Bojarevics, V. ORCID: 0000-0002-7326-7748 , Djambazov, G. ORCID: 0000-0001-8812-1269 , Harding, R.A., Pericleous, K. ORCID: 0000-0002-7426-9999 and Wickins, M. (2002) Investigation of the cold crucible melting process: experimental and numerical study. In: Proceedings of the 5th International pamir Conference. Cost P6 Annual Workshop 2002. Fundamental and Applied MHD. International pamir Conference, II.77-II.82.

Bojarevics, V. ORCID: 0000-0002-7326-7748 and Pericleous, K. ORCID: 0000-0002-7426-9999 (2001) Dynamics of magnetically suspended fluid. In: 6th International Symposium on Magnetic Suspension Technology [Proceedings]. ISMST, pp. 287-292.

Bojarevics, V. ORCID: 0000-0002-7326-7748 and Pericleous, K. ORCID: 0000-0002-7426-9999 (2001) Modelling induction melting energy savings. In: Proceedings of the International Colloquium. Modelling for Saving Resources. Riga, May 17-18, 2001. Laboratory for Mathematical Modelling of Environmental and Technological Processes, University of Latvia, Riga, Latvia, pp. 11-16. ISBN 998466189X

Bojarevics, V. ORCID: 0000-0002-7326-7748 , Pericleous, K. ORCID: 0000-0002-7426-9999 , Harding, R. and Wickins, M. (2003) Induction skull-melting dynamics for different materials: numerical modeling and comparisons with experiments. In: Proceedings of the Tenth International Conference on Modeling of Casting, Welding and Advanced Solidification Processes. The Mineral, Metals and Materials Society (TMS), Warrendale, PA, USA, pp. 591-598. ISBN 0873395557

Bojarevics, Valdis ORCID: 0000-0002-7326-7748 and Roy, Alan (2011) Effect of magnetic forces on bubble transport in aluminium electrolysis cells. In: Proceedings of the 8th PAMIR International Conference on Fundamental and Applied MHD. Laboratoire CNRS-EPM/SIMaP / Institute of Physics, University of Latvia, Corsica, France, pp. 453-457.

Bose, Anu, Nguyen, Tuan ORCID: 0000-0003-0055-8218 , Du, Hongbo and AlZoubi, Alaa (2021) Faster RCNN hyperparameter selection for breast lesion detection in 2D ultrasound images. In: Advances in Computational Intelligence Systems Contributions Presented at the 20th UK Workshop on Computational Intelligence, September 8-10, 2021, Aberystwyth, Wales, UK. Advances in Intelligent Systems and Computing (AISC) (1409). Springer, Cham, pp. 179-190. ISBN 978-3030870942 ISSN 2194-5365 (doi:https://doi.org/10.1007/978-3-030-87094-2_16)

Christakis, Nicholas, Chapelle, Pierre, Patel, Mayur K. and Cross, Mark (2006) On the continuum modelling of segregation of granular mixtures during hopper emptying in core flow mode. In: European Conference on Computational Fluid Dynamics ECCOMAS CFD 2006 Proceedings. TU Delft, The Netherlands, The Netherlands. ISBN 9090209700

Croft, T.N., Pericleous, K.A. ORCID: 0000-0002-7426-9999 , Bobadilla, M. and Gardin, P. (2002) Three-phase computations of the continuous casting process. In: Proceedings of the 4th European Continuous Casting Conference. IOM Communications Ltd, London, England, UK, pp. 545-554.

Cross, M., Croft, T.N., Djambazov, G. ORCID: 0000-0001-8812-1269 and Pericleous, K. ORCID: 0000-0002-7426-9999 (2003) Computational modelling of bubbles, droplets and particles in metals reduction and refining. In: The 3rd International Conference on CFD in the Minerals and Process Industries [Proceedings]. CSIRO Publishing, Collingwood, Victoria, Australia, pp. 47-52. ISBN 978064309038X

Cross, M., Williams, A., Bailey, C., Taylor, G.A., Pericleous, K. ORCID: 0000-0002-7426-9999 and Croft, T.N. (2000) Towards a comprehensive model of the direct chill casting process. In: Modeling of Casting, Welding and Advanced Solidification Processes IX [Proceedings]. Shaker, Aachen, Germany, pp. 713-720. ISBN 3826572300

El Souri, Mohammed, Gao, James ORCID: 0000-0001-5625-3654 and Simmonds, Clive (2019) Integrating manufacturing knowledge with design process to improve quality in aerospace industry. In: Procedia CIRP: 29th CIRP Design Conference 2019 08-10 May 2019, Povoa de Varzim, Portugal. Elsevier, pp. 374-379. ISSN 2212-8271 (doi:https://doi.org/10.1016/j.procir.2019.04.179)

Ewer, J.A.C. ORCID: 0000-0003-0609-272X , Galea, E.R. ORCID: 0000-0002-0001-6665 , Patel, M.K. and Knight, B. (2000) The development of group solvers in the SMARTFIRE fire field model. In: ACME '2000 The 8th Annual Conference of the Association for Computational Mechanics in Engineering. Extended Abstracts. University of Greenwich, Greenwich, London, UK, pp. 54-57. ISBN 1861661509

Fallah, N.A., Bailey, C. ORCID: 0000-0002-9438-3879 and Cross, M. (2000) CFD approach for solid mechanics analysis. In: European Congress on Computational Methods in Applied Sciences and Engineering. ECCOMAS 2000. [Proceedings]. ECCOMAS.

Gao, James ORCID: 0000-0001-5625-3654 , Arey, Daniel, Le, Chi Hieu ORCID: 0000-0002-5168-2297 and El Souri, Mohammed ORCID: 0000-0002-9651-7770 (2019) An investigation into the adoption of automation in the aerospace manufacturing industry. In: Advances in Manufacturing Technology XXXIII. Advances in Transdisciplinary Engineering, 9 . IOS Press, pp. 87-92. ISBN 978-1643680088 ISSN 2352-751X (Print), 2352-7528 (Online) (doi:https://doi.org/10.3233/ATDE190016)

Gradin, P., Vallen, H., Graham, D., Nygard, P. and Gregersen, Ø.W. (2004) Acoustic emission testing of paper. In: Proceedings of the 2004 Progress in Paper Physics Seminar. NTNU (Norwegian University of Science and Technology) and PFI (Paper and Fibre Research Institute), Trondheim, Norway, p. 155. (Unpublished)

Gwyer, D., Misselbrook, P., Bailey, C. ORCID: 0000-0002-9438-3879 , Conway, P.P. and Williams, K. (2004) Polymer waveguide and VCSEL array multi-physics modelling for OECB based optical backplanes [opto-electrical circuit boards]. In: Proceedings of the 5th International Conference on Thermal and Mechanical Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2004. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 399-406. ISBN 0780384202 (doi:https://doi.org/10.1109/ESIME.2004.1304070)

Gwyer, D., Misselbrook, P., Philpott, D., Bailey, C. ORCID: 0000-0002-9438-3879 , Conway, P.P. and Williams, K. (2004) Thermal, mechanical and optical modelling of VCSEL packaging. In: The Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena In Electronic Systems (ITHERM 2004) [Proceedings]. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 405-410. ISBN 0780383575 ISSN 1089-9870 (doi:https://doi.org/10.1109/ITHERM.2004.1318311)

Hristov, Georgi, Zlatov, Nikolay, Zahariev, Plamen, Le, Chi Hieu ORCID: 0000-0002-5168-2297 , Kinaneva, Diyana, Georgiev, Georgi, Yotov, Yavor, Gao, Xiaoyu ORCID: 0000-0001-5625-3654 , Chu, Anh My, Nguyen, Ho Quang, Huynh, Le Minh, Bui, Trung Thanh, Patar, Mohd Nor Azmi Ab, Mahmud, Jamaluddin and Packianather, Michael (2023) Development of a smart system for early detection of forest fires based on unmanned aerial vehicles. In: Annals of Computer Science and Information Systems - Proceedings of the Seventh International Conference on Research in Intelligent and Computing in Engineering (RICE 2022). November 11–12, 2022. Hung Yen University of Technology and Education, Vietnam. Polskie Towarzystwo Informatyczne, Warsaw, Poland, pp. 135-139. ISBN 978-8396589767; 978-8396589774 ISSN 2300-5963 (doi:https://doi.org/10.15439/978-83-965897-6-7)

Hughes, Michael, Pericleous, Koulis ORCID: 0000-0002-7426-9999 and Strusevitch, Nadia (2002) Modelling the fluid dynamics and coupled phenomena in arc weld pools. In: Mathematical Modelling of Weld Phenomena. Materials Modelling, 6 . Maney Publishing for the Institute of Materials, Minerals and Mining, London, England, UK, pp. 63-81. ISBN 9781902653563

Ismail, Mohd Shahrom, Nordin, Farhah Nadhirah, Le, Chi Hieu ORCID: 0000-0002-5168-2297 , Nguyen, Ho Quang and Mahmud, Jamaluddin (2024) The implementation of the single perturbation load approach to axially-compressed stiffened-stringer cylinder. In: Intelligent Manufacturing and Mechatronics: Selected Articles from iM3F 2023, 7th – 8th August, Pekan, Malaysia. Springer Proceedings in Materials (SPM) - iM3F: International conference on Innovative Manufacturing, Mechatronics & Materials Forum, 40 . Springer, Singapore, pp. 13-23. ISBN 978-9819998487; 978-9819998470 ISSN 2662-317X (Print), 2662-3161 (Online) (doi:https://doi.org/10.1007/978-981-99-9848-7_2)

Javadi, A.A., Faramarzi, A. and Ahangar-Asr, A. (2009) An intelligent finite element method. In: Proceedings of the 17th UK Conference on Computational Mechanics. Spencer Institute of Theoretical and Computational Mechanics, Unversity of Nottingham, Nottingham, UK, pp. 307-310. ISBN 9780853582557

Javadi, Akbar, Faramarzi, Asaad, Farmani, Raziyeh and Evans, Ken (2009) Design of microstructure and topological optimisation of auxetic materials. In: Proceedings of the 17th UK Conference on Computational Mechanics. Spencer Institute of Theoretical and Computational Mechanics, Unversity of Nottingham, Nottingham, UK, pp. 251-260. ISBN 9780853582557

Lai, C.-H. ORCID: 0000-0002-7558-6398 , Ierotheou, C.S., Palansuriya, C.J. and Pericleous, K.A. ORCID: 0000-0002-7426-9999 (2001) Domain decomposition methods for welding problems. In: 12th International Conference on Domain Decomposition Methods in Sciences and Engineering. ddm.org, pp. 411-419.

Lu, H. ORCID: 0000-0002-4392-6562 , Stoyanov, S. ORCID: 0000-0001-6091-1226 , Bailey, C. ORCID: 0000-0002-9438-3879 , Hung, K.C. and Chan, Y.C. (2001) A modelling and experimental analysis of the no-flow underfill process for flip-chip assembly. In: Proceedings of the 4th International Symposium on Electronic Packaging Technology. Institute of Electrical and Electronics Engineers, Inc., pp. 338-343. ISBN 0780398114

Lu, Hua ORCID: 0000-0002-4392-6562 and Bailey, Chris ORCID: 0000-0002-9438-3879 (2003) Modelling the performance of lead-Free solder interconnects for copper bumped flip-chip devices. In: ASME 2003 International Electronic Packaging Technical Conference and Exhibition. American Society of Mechanical Engineers, New York, USA, pp. 605-610. ISBN 0-7918-3690-8 (doi:https://doi.org/10.1115/IPACK2003-35356)

McBride, Diane, Croft, Nick and Cross, Mark (2003) Combined vertex-based - cell-centred finite volume method for flows in complex geometries. In: The 3rd International Conference on CFD in the Minerals and Process Industries [Proceedings]. CSIRO Publishing, Collingwood, Victoria, Australia, pp. 351-356. ISBN 978064309038X

McManus, K., Cross, M., Walshaw, C. ORCID: 0000-0003-0253-7779 , Johnson, S., Bailey, C. ORCID: 0000-0002-9438-3879 , Pericleous, K. ORCID: 0000-0002-7426-9999 , Slone, A. and Chow, P. (2000) Virtual manufacturing and design in the real world - implementation and scalability on HPPC systems. In: Parallel Computational Fluid Dynamics 1999: Towards Teraflops, Optimization and Novel Formulations. North-Holland, Amsterdam, The Netherlands, pp. 47-56. ISBN 978044482851 (doi:https://doi.org/10.1016/B978-044482851-4.50009-8)

Mileman, T.J., Knight, B., Cowell, D.F. and Preddy, K.L. (1998) Cast-aid: a decision support system for designing castings. In: 8th International conference on Modeling of Casting and Welding Processes. Minerals, Metals & Materials Society, Warrendale, PA, USA, pp. 1087-1094. ISBN 0873394070

Owodunni, O.O., Zhang, T. and Gao, J. ORCID: 0000-0001-5625-3654 (2013) Energy consideration in machining operations - towards explanatory models for optimisation results. In: 11th Global Conference on Sustainable Manufacturing : Proceedings. Innovative Solutions. Universitätsverlag der TU Berlin, Berlin, Germany, pp. 153-158. ISBN 978-3-7983-2609-5

Patel, M.K., Bailey, C. ORCID: 0000-0002-9438-3879 , Djambazov, G. ORCID: 0000-0001-8812-1269 , Shrimpton, J. and Jalili, V. (2003) Application of CFD in vacuum dezincing process. In: The 3rd International Conference on CFD in the Minerals and Process Industries [Proceedings]. CSIRO Publishing, Collingwood, Victoria, Australia, pp. 313-318. ISBN 978064309038X

Pericleous, K.A. ORCID: 0000-0002-7426-9999 , Bojarevics, V. ORCID: 0000-0002-7326-7748 , Djambazov, G. ORCID: 0000-0001-8812-1269 , Harding, R.A. and Wickins, M. (2005) Maximising heat transfer efficiency in the cold crucible induction melting process. In: EUROTHERM Seminar 82. Numerical Heat Transfer 2005 [Proceedings]. Institute of Thermal Technology, Silesian University of Technology, Gliwice, Poland, pp. 405-414. ISBN 8392238125

Phillips, T.N. and Williams, A.J. (2000) Semi-Lagrangian finite volume methods for viscoelastic flow problems. In: The Mathematics of Finite Elements and Applications X (MAFELAP 19). Elsevier Science Ltd., Kidlington, Oxford, pp. 335-344. ISBN 0080435688

Ramchurn, Adesh, El Souri, Mohammed ORCID: 0000-0002-9651-7770 , Gao, James ORCID: 0000-0001-5625-3654 , Le, Chi Hieu ORCID: 0000-0002-5168-2297 and Benetier, Julien (2019) An analysis of automation scenarios in an aerospace environmental testing facility. In: Advances in Manufacturing Technology XXXIII. Advances in Transdisciplinary Engineering, 9 . IOS Press, pp. 93-98. ISBN 978-1643680088 ISSN 2352-751X (Print), 2352-7528 (Online) (doi:https://doi.org/10.3233/ATDE190017)

Sinclair, Keith I., Goussetis, George, Desmulliez, Marc P.Y., Sangster, Alan J., Tilford, Tim, Bailey, Chris ORCID: 0000-0002-9438-3879 and Parrott, Kevin (2009) Polymer curing within an optimised open-ended microwave oven. In: European Microwave Week 2008, “Bridging Gaps”, Conference Proceedings,. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 17-20. ISBN 978-2874870064 (doi:https://doi.org/10.1109/EUMC.2008.4751375)

Slone, A.K., Cross, M., Pericleous, K.A. ORCID: 0000-0002-7426-9999 and Bailey, C. ORCID: 0000-0002-9438-3879 (2001) A finite volume unstructured mesh approach to dynamic fluid-structure interaction: an assessment of the challenge of flutter analysis. In: Trends in Computational Structural Mechanics. International Center for Numerical Methods in Engineering (CIMNE), Barcelona, Spain, pp. 741-750. ISBN 8489925771

Slone, A.K., Pericleous, K. ORCID: 0000-0002-7426-9999 , Bailey, C. ORCID: 0000-0002-9438-3879 and Cross, M. (2001) Details of an integrated approach to three-dimensional dynamic fluid structure interaction. In: Fluid Structure Interaction. WIT Press, Southampton, UK, pp. 57-66. ISBN 1853128813 ISSN 1353-808x

Slone, A.K., Pericleous, K. ORCID: 0000-0002-7426-9999 , Bailey, C. ORCID: 0000-0002-9438-3879 and Cross, M. (2001) Dynamic fluid-structure interaction using finite volume unstructured mesh procedures. In: European Conference on Computational Fluid Dynamics ECCOMAS CFD 2006 Proceedings. ECCOMAS. ISBN 0905091124

Slone, Avril, Fallah, Nosrat, Bailey, Christopher ORCID: 0000-0002-9438-3879 and Cross, Mark (2002) A finite volume approach to geometrically non-linear stress analysis. In: Finite volumes for complex applications III: problems and perspectives. Hermes Penton Science, London, UK, pp. 663-670. ISBN 9781903996348

Sparrow, R. D., Adekunle, Andrew, Berry, Robert and Farnish, Richard (2015) Simulating and modelling the impact of secure communication latency for closed loop control. In: Internet Technologies and Applications (ITA), 2015. IEEE, Wrexham, UK, pp. 138-143. ISSN 9781479980369 (doi:https://doi.org/10.1109/ITechA.2015.7317384)

Sparrow, R.D., Adekunle, A.A., Berry, R.J. and Farnish, R.J. (2015) Balancing throughput and latency for an aerial robot over a wireless secure communication link. In: 2015 IEEE 2nd International Conference on Cybernetics (CYBCONF). IEEE, pp. 184-189. ISBN 978-1-4799-8320-9 (doi:https://doi.org/10.1109/CYBConf.2015.7175929)

Stoyanov, S. ORCID: 0000-0001-6091-1226 and Bailey, C. ORCID: 0000-0002-9438-3879 (2003) Optimization and finite element analysis for reliable electronic packaging. In: Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-electronics and Micro-systems. Proceedings of EuroSimE 2003. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 391-399. ISBN 0780370546

Stoyanov, S. ORCID: 0000-0001-6091-1226 , Bailey, C. ORCID: 0000-0002-9438-3879 , Saxena, N. and Adams, S. (2004) Modelling the wave soldering process. In: Proceedings of the 6th International Conference on Electronics Materials and Packaging (EMAP 2004). Institute of Electrical and Electronics Engineers, pp. 553-558. ISBN 983251486X

Strusevich, Nadezhda V., Pericleous, Koulis ORCID: 0000-0002-7426-9999 and Hughes, Michael (2002) Characterisation of weldpool shapes in the laser welding of thick plates. In: Mathematical Modelling of Weld Phenomena. Materials Modelling, 6 . Maney Publishing for the Institute of Materials, Minerals and Mining, London, England, UK, pp. 83-92. ISBN 9781902653563

Sutharssan, T., Stoyanov, S. ORCID: 0000-0001-6091-1226 , Bailey, C. ORCID: 0000-0002-9438-3879 and Rosunally, Y. (2012) Data analysis techniques for real-time prognostics and health management of semiconductor devices. In: Microelectronics and Packaging. Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ, USA, pp. 1-7. ISBN 978-1-4673-0694-2 (print)

Sutharssan, Thamo, Bailey, Chris ORCID: 0000-0002-9438-3879 , Stoyanov, Stoyan ORCID: 0000-0001-6091-1226 and Rosunally, Yasmine (2011) Prognostics and reliability assessment of light emitting diode packaging. In: Electronic Packaging Technology and High Density Packaging (ICEPT-HDP), 2011 12th International Conference on. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 1-7. ISBN 978-1-4577-1770-3 (print), 978-1-4577-1768-0 (eISBN) (doi:https://doi.org/10.1109/ICEPT.2011.6066984)

Umeadi, Bonny B.N. and Jones, K.G. (2008) The development of an intelligent sensor for the monitoring of pipeline system integrity. In: SPE Russian oil and gas technical conference and exhibition 2008 : 28-30 October 2008, Moscow, Russia. Society of Petroleum Engineers, New York, USA. ISBN 9781605607795 (doi:https://doi.org/10.2118/115503-MS)

Vu, Minh Duc, Chu, Anh My, Nguyen, The Nguyen, Duong, Xuan Bien, Le, Chi Hieu ORCID: 0000-0002-5168-2297 , Gao, Xiaoyu ORCID: 0000-0001-5625-3654 , Zlatov, Nikolay, Hristov, Georgi, Nguyen, Van Anh, Mahmud, Jamaluddin and Packianather, Michael (2023) Prediction of the welding process parameters and the weld bead geometry for robotic welding applications with adaptive neuro-fuzzy models. In: Intelligent Systems and Networks: Selected Articles from ICISN 2023, Vietnam. Lecture Notes in Networks and Systems (LNNS), 752 . Springer, Singapore, pp. 148-158. ISBN 978-9819947256; 978-9819947249; 978-9819947270 ISSN 2367-3370 (Print), 2367-3389 (Online) (doi:https://doi.org/10.1007/978-981-99-4725-6_20)

Williams, A.J., Croft, T.N. and Cross, M. (2002) Computational modelling of metals forming processes. In: The 5th International EASFORM Conference on Material Forming [Proceedings]. Akapit Publishing, Kraków, Poland, pp. 67-70. ISBN 8371080980

Woon, Fei Ling, Knight, Brian, Petridis, Miltos and Patel, Mayur (2005) CBE-conveyor: a case-based reasoning system to assist engineers in designing conveyor systems. In: Case-Based Reasoning Research and Development: 6th International Conference on Case-Based Reasoning, ICCBR 2005, Chicago, IL, USA, August 23-26, 2005. Proceedings. Lecture Notes in Computer Science (3620). Springer Berlin Heidelberg, Berlin, Heidelberg, Germany, pp. 640-651. ISBN 9783540281740 (doi:https://doi.org/10.1007/11536406_48)

Xu, Sha, Chan, Yan Cheong, Zhu, Xiaoxin, Lu, Hua ORCID: 0000-0002-4392-6562 and Bailey, Chris ORCID: 0000-0002-9438-3879 (2014) Effective method to disperse and incorporate carbon nanotubes in electroless Ni-P deposits. In: 2014 IEEE 64th Electronic Components and Technology Conference (ECTC) Proceedings. Curran Associates, Stoughton, WI, USA, pp. 1342-1347. ISBN 9781479924080 (doi:https://doi.org/10.1109/ECTC.2014.6897466)

Yin, C.Y. ORCID: 0000-0003-0298-0420 , Lu, H. ORCID: 0000-0002-4392-6562 , Bailey, C. ORCID: 0000-0002-9438-3879 and Chan, Y.C. (2004) Effects of reflow process on the reliability of flip chip on flex interconnections using anisotropic conductive adhesives. In: 2004 International IEEE Conference on Asian Green Electronics (AGEC) [Proceedings]. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 240-245. ISBN 0-7803-8203-X (doi:https://doi.org/10.1109/AGEC.2004.1290912)

Yin, C.Y. ORCID: 0000-0003-0298-0420 , Lu, H. ORCID: 0000-0002-4392-6562 , Bailey, C. ORCID: 0000-0002-9438-3879 and Chan, Y.C. (2003) Experimental and modeling analysis of the reliability of the anisotropic conductive films. In: 2003 Proceedings 53rd Electronic Components & Technology Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 698-702. ISBN 0780377915 ISSN 0569-5503 (doi:https://doi.org/10.1109/ECTC.2003.1216359)

Yotov, Yavor, Zlatov, Nikolay, Hristov, Georgi, Zahariev, Plamen, Le, Chi Hieu ORCID: 0000-0002-5168-2297 , Gao, Xiaoyu ORCID: 0000-0001-5625-3654 , Chu, Anh My, Nguyen, Ho Quang, Huynh, Le Minh, Bui, Trung Thanh, Mahmud, Jamaluddin and Packianather, Michael (2023) Innovative development of a flying robot with a flexible manipulator for aerial manipulations. In: Annals of Computer Science and Information Systems - Proceedings of the Seventh International Conference on Research in Intelligent and Computing in Engineering (RICE 2022). November 11–12, 2022. Hung Yen University of Technology and Education, Vietnam. Polskie Towarzystwo Informatyczne, Warsaw, Poland, pp. 49-54. ISBN 978-8396589767; 978-8396589774 ISSN 2300-5963 (doi:https://doi.org/10.15439/978-83-965897-6-7)

Conference or Conference Paper

Abou-Chakra, Hadi, Baxter, John, Tuzun, Ugur, Chapelle, Pierre, Patel, Mayur, Bridle, Ian, Bradley, Michael S.A. and Reed, Alan R. (2004) Degradation toolkit for predicting the amount of degradation of particulate solids in lean phase pneumatic conveyors. In: International Conference for Particle Technology (PARTEC 2004), 16-18 March 2004, Nuremberg, Germany. (Unpublished)

Bojarevics, V. ORCID: 0000-0002-7326-7748 and Pericleous, K. ORCID: 0000-0002-7426-9999 (2003) AC and DC magnetic levitation: melting, fluid flow and oscillations. In: 4th International Conference on Electromagnetic Processing of Materials, 14-17 Oct 2003, Lyon, France.

Chen, Hua-Peng (2008) Mode shape expansion using perturbed force vector approach. In: Sixteenth UK Conference of the Association of Computational Mechanics in Engineering (ACME UK), 1-2 Apr 2008, Newcastle upon Tyne, UK. (Unpublished)

Chen, Hua-Peng (2008) Singular stresses at the tip of a crack terminating at frictional interface of fibre reinforced composites. In: Sixteenth UK Conference of the Association of Computational Mechanics in Engineering (ACME UK), 1-2 Apr 2008, Newcastle upon Tyne, UK. (Unpublished)

Christakis, Nicholas, Chapelle, Pierre, Patel, Mayur K., Wang, Junye, Cross, Mark, Baxter, John, Gröger, Torsten, Abou-Chakra, Hadi, Tüzün, Ugur, Bridle, Ian and Leaper, Mark C. (2002) Mathematical modelling of the behaviour of granular material in a computational fluid dynamics framework using micro-mechanical models. In: 5th World Congress on Computational Mechanics (WCCM V), 7-12 Jul 2002, Vienna, Austria.

Cross, Mark, Stoyanov, Stoyan ORCID: 0000-0001-6091-1226 , Mouchmov, Apostol, Lu, Hua ORCID: 0000-0002-4392-6562 , Croft, Nick, Slone, Avril, Williams, Alison, Bailey, Chris ORCID: 0000-0002-9438-3879 and Pericleous, Koulis ORCID: 0000-0002-7426-9999 (2003) Multi-physics-multi-scale simulation and optimisation: the next generation. In: NAFEMS World Congress, 2003, Orlando, Florida, USA.

Maklad, Osama ORCID: 0000-0001-6893-2654 , Theofilis, V. and Elsheikh, A. (2018) Fluid Structure Interaction (FSI) simulation of the human eye under the air puff tonometry using Computational Fluid Dynamics (CFD). In: Tenth International Conference on Computational Fluid Dynamics (ICCFD10), 9th - 13th July 2018, Barcelona, Spain.

Maklad, Osama ORCID: 0000-0001-6893-2654 , Theofilis, Vassilios and Elsheikh, Ahmed (2018) Role of impinging jets in the biomechanical correction of the intraocular pressure ( IOP ) measurement. In: Thirteenth International Conference of Fluid Dynamics, 21st -22nd December 2018, Cairo, Egypt.

Owodunni, Oladele, Hinduja, Srichand, Mekid, Samir and Zia, Ahmad (2007) An investigation of optimum cutting conditions for STEP-NC turned features. In: Innovative Production Machines and Systems Conference 2007 (IPROMS), 2-13 July 2007, http://conference.iproms.org/ [Virtual Conference].

Pillai, Sreejit, Arokiam, Alan, Bhatti, Raj and Collins, T. (2011) Make to order manufacturing and operational management strategies – a case study at Priorclave Ltd. In: 18th International Annual EurOMA Conference: Exploring Interfaces, 3-6 Jul 2011, Cambridge, UK. (Unpublished)

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2021) Applications of Discrete Element Method (DEM) in engineering and science. In: Faculty of Engineering and Science Research Seminar, 27 October 2021, University of Greenwich, Faculty of Engineering and Science. (Unpublished)

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2021) Applying Discrete Element Method (DEM) to develop postharvest technologies. In: Agrartechnisches Seminar WiSe2021/22, 25 October 2021, University of Hohenheim, Germany. (Unpublished)

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2019) Developing appropriate technologies to reduce food waste. In: Inspiring Engineering lecture series, 5 Feb 2019, University of Greenwich, P129, Wardroom. (Unpublished)

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2021) Discrete Element Method and its many applications. In: Church & Dwight Colloquium, 3 November 2021, Church & Dwight, Bowles Well Gardens, Folkestone, Kent Ct19 6Pq, Folkestone CT19 6PQ. (Unpublished)

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2021) Using Discrete Element Method (DEM) to develop agricultural machinery. In: Discrete element method for industrial or commercial applications, 15 November 2021, Alvan Blanch, Chelworth, SN16 9SG. (Unpublished)

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2021) Using Discrete Element Method (DEM) to develop postharvest technologies. In: Simulation DEM, 16 November 2021, University of Greenwich. (Unpublished)

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2021) Using Participatory Technology Development and Discrete Element Method to develop technologies for rural enterprises in low-income countries. In: DMU PGR Seminar, 18 November 2021, De Montfort University, Leicester UK. (Unpublished)

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2021) The role of an engineer in rural development. In: GREat talks at Medway, 6 October 2021, University of Greenwich, P129, Wardroom, P129, Wardroom. (Unpublished)

Slone, A.K., Williams, A.J., Grossman, D., Croft, T.N. and Cross, M. (2003) A generic time and space accurate numerical approach to closely coupled fluid-structure interaction problems. In: NAFEMS World Congress 2003, 2003, Orlando, Florida, USA.

Sparrow, R. D., Adekunle, Andrew, Berry, Robert and Farnish, Richard (2015) Study of two security constructs on throughput for wireless sensor multi-hop networks. In: 38th International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO), 2015, 25-29th May, Opatija. (doi:https://doi.org/10.1109/MIPRO.2015.7160476)

Wang, Yi, Ke, Maolong and Lancaster, Michael J. (2009) Micromachined 60 GHz air-filled interdigital bandpass filter. In: International Workshop on Microwave Filters, 16-18 November 2009, Toulouse, France.

Working Paper

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2017) Capacity building on energy performance evaluation of a pneumatic dryer with adjustable drying-duct length. [Working Paper]

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2021) Flatbed dryer stirrer. [Working Paper]

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2020) Solar-powered multipurpose hammermill (Part 1). [Working Paper]

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2021) Solar-powered multipurpose hammermill (Part 2). [Working Paper]

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2019) What you need to know before buying a CASSAVA FACTORY. [Working Paper]

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2019) What you need to know before buying a CASSAVA GRATER. [Working Paper]

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2019) What you need to know before buying a CASSAVA PEELER. [Working Paper]

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2019) What you need to know before buying a CASSAVA PRESS. [Working Paper]

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2019) What you need to know before buying a PNEUMATIC DRYER. [Working Paper]

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2020) Winch operated cassava press. [Working Paper]

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 and Parmar, Aditya ORCID: 0000-0002-2662-1900 (2021) How to evaluate the performance of CASSAVA DRYERS. [Working Paper]

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 and Parmar, Aditya ORCID: 0000-0002-2662-1900 (2021) How to evaluate the performance of CASSAVA GRATERS. [Working Paper]

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 and Parmar, Aditya ORCID: 0000-0002-2662-1900 (2021) How to evaluate the performance of CASSAVA PEELING MACHINES. [Working Paper]

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 and Parmar, Aditya ORCID: 0000-0002-2662-1900 (2021) How to evaluate the performance of CYCLONES. [Working Paper]

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 and Parmar, Aditya ORCID: 0000-0002-2662-1900 (2021) How to evaluate the performance of Cassava Presses. [Working Paper]

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 and Parmar, Aditya ORCID: 0000-0002-2662-1900 (2021) How to evaluate the performance of HAMMERMILLS. [Working Paper]

Monograph

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2020) Capacity building on dimensioning, design and operation of small-scale pneumatic dryers. Project Report. Natural Resources Insitute, University of Greenwich, London, University of Greenwich. (Unpublished)

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2020) Capacity building on dimensioning, designing, building and operating small-scale pneumatic dryers. Project Report. Natural Resources Insitute, University of Greenwich, London, University of Greenwich. (Unpublished)

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2020) Capacity building on energy performance evaluation of a pneumatic dryer with adjustable drying-duct length. Project Report. Natural Resources Insitute, University of Greenwich, London, University of Greenwich. (Unpublished)

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2022) Cassava peeling machine construction guide. Manual. Natural Resources Institute, University of Greenwich, London.

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2020) Construction guide of a small-scale pneumatic dryer to process cassava. Manual. CGIAR Research Program on Roots, Tubers and Bananas, London, University of Greenwich.

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2022) Continuous flow cassava flour factory. Manual. Natural Resources Institute, University of Greenwich, London.

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2020) Evaporative cooling and air conditioner cooling: maintenance, improvements and data collection. Project Report. Natural Resources Insitute, University of Greenwich, London, University of Greenwich. (Unpublished)

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2020) Feeding system for cassava pneumatic drying. Manual. Natural Resources Insitute, University of Greenwich, London, University of Greenwich.

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2020) Identifying capacity building needs for the cassava sector: a workshop with equipment manufacturers, food processors and service providers. Project Report. Natural Resources Insitute, University of Greenwich, London, University of Greenwich. (Unpublished)

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2021) Impact of the feeding system on pneumatic dryers’ energy performance. Manual. University of Greenwich, London.

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2020) Low-drudgery novel press for cassava dewatering. Manual. Natural Resources Insitute, University of Greenwich, London, University of Greenwich.

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2020) Measuring pressure during cassava dewatering with a lifting bag. Manual. Natural Resources Insitute, University of Greenwich, London, University of Greenwich.

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2022) Multipurpose hammermill: construction guide. Manual. Natural Resources Institute, University of Greenwich, London, University of Greenwich.

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2022) Pellet machine construction guide. Manual. Natural Resources Institute, University of Greenwich, London.

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2021) Roller press construction guide. Manual. CGIAR Research Program on Roots, Tubers and Bananas, London, University of Greenwich.

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2021) Scaling out energy-efficient pneumatic drying technology in Tanzania. Manual. CGIAR Research Program on Roots, Tubers and Bananas, London, University of Greenwich.

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2018) Training Course Report: determining energy efficiency of dryers. Project Report. Natural Resources Insitute, University of Greenwich, London, University of Greenwich. (Unpublished)

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2019) What you need to know before buying a HAMMERMILL. Manual. University of Greenwich, London.

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2020) A novel feeding system for pneumatic drying of cassava. Manual. Natural Resources Insitute, University of Greenwich, London, University of Greenwich.

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2021) solar heater. Manual. Natural Resources Insitute, University of Greenwich, London, University of Greenwich.

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 and Komlaga, Gregory (2020) Energy performance of a pneumatic dryer and of a flatbed dryer used for small-scale cassava processing. Technical Report. Natural Resources Insitute, University of Greenwich, London, University of Greenwich. (Unpublished)

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 and Komlaga, Gregory (2020) Improved energy performance of small-scale pneumatic dryers used for cassava processing. Technical Report. Natural Resources Insitute, University of Greenwich, London, University of Greenwich. (Unpublished)

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 and Komlaga, Gregory (2020) Capacity building on designing and manufacturing shell-and-tube heat exchangers. Technical Report. Natural Resources Insitute, University of Greenwich, London, University of Greenwich. (Unpublished)

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 and Komlaga, Gregory (2020) Innovative equipment for cassava dewatering. Technical Report. Natural Resources Insitute, University of Greenwich, London, University of Greenwich. (Unpublished)

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 and Rees, Debbie (2020) Environmentally-controlled sweetpotato storage unit. Project Report. Natural Resources Insitute, University of Greenwich, London, University of Greenwich. (Unpublished)

Thesis

Aliyu, Musa Dahiru (2018) Hot dry rock reservoir modelling. PhD thesis, University of Greenwich.

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

Burnett, Anthony John (1996) The use of laboratory erosion tests for the prediction of wear in pneumatic conveyor bends. PhD thesis, University of Greenwich.

Chen, Li Choo (2007) Optimisation of rule-based testing for scheduling within a distributed computing environment. PhD thesis, University of Greenwich.

Chow, Peter M-Y (1993) Control volume unstructured mesh procedure for convection-diffusion solidification processes. PhD thesis, University of Greenwich.

Ebenuwa, Andrew Utomi (2018) Reliability-based analysis and maintenance of buried pipes considering the effect of uncertain variables. PhD thesis, University of Greenwich.

Frystacki, Thomas (2016) Evaluation of the thermal environment in large manufacturing plants. PhD thesis, University of Greenwich.

Hanson, Robert (2001) A model to predict the lifetime of pneumatic conveyor bends. PhD thesis, University of Greenwich.

Hettiaratchi, Kaushika (2006) A comparison between the pressure gradients in vertical and horizontal pneumatic conveying, with an investigation into the effect of pipeline bore in vertical conveying. PhD thesis, University of Greenwich.

Hyder, Linda (2000) The effect of particle size and density on pressure gradients in horizontal pipelines in lean phase pneumatic conveying. PhD thesis, University of Greenwich.

Jones, Mark G. (1988) The influence of bulk particulate properties on pneumatic conveying performance. PhD thesis, Thames Polytechnic.

Kessel, Stephen Ronald (1985) The interaction between rotary valves and pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

Khan, Naushad Salim (2008) Handling characteristics of coal/biomass mixes: measurements and establishing benchmarks. PhD thesis, University of Greenwich.

Kotzur, Benjamin Andrew (2018) Characterisation and prediction of particle attrition in lean phase pneumatic conveyors: the influence of particle concentration. PhD thesis, University of Greenwich.

Li, Ji (2007) A study of the solid particle erosion performance of automative and other novel low carbon steels. PhD thesis, University of Greenwich.

Mahmoodian, Mojtaba (2013) Reliability analysis and service life prediction of pipelines. PhD thesis, University of Greenwich.

Njoku, Jude Ebem (2016) A study of the thermomechanical reliability of solder joints in surface mount electronics technology. PhD thesis, University of Greenwich.

Owonikoko, Aminu (2012) Predicting storage vessel geometry requirements for discharge of extreme shape materials. MPhil thesis, University of Greenwich.

Pesinis, Konstantinos (2018) Development of advanced reliability assessment models with applications in integrity management of onshore energy pipelines. PhD thesis, University of Greenwich.

Pillai, Sreejit (2015) A decision support system for ERP projects in make -to-order manufacturing SMEs. PhD thesis, University of Greenwich.

Pittman, Andrew Nigel (1990) Suction nozzle feeding mechanisms and their effect on the performance of vacuum pneumatic conveying systems. MPhil thesis, Thames Polytechnic.

Sagor, Md. Hasanuzzaman (2014) Differentially fed active antennas. PhD thesis, University of Greenwich.

Salter, Guy Francis (1999) Investigations into the segregation of heaps of particulate materials with particular reference to the effects of particle size. PhD thesis, University of Greenwich.

Tang, Ying Kit (2012) A risk analysis methodology for micro/nano manufacturing. PhD thesis, University of Greenwich.

Tavakoli Dehkordi, Anousheh (2015) Optimisation and algorithms in wireless networks for mission critical applications. PhD thesis, University of Greenwich.

Taylor, Gareth Anthony (1996) A vertex based discretisation scheme applied to material non-linearity within a multi-physics finite volume framework. PhD thesis, University of Greenwich.

Tong, Kap Ngam (1981) The erosion of pipe bends in pneumatic conveying systems. PhD thesis, Thames Polytechnic.

Tucs, Andrejs (2018) Renewable energy supply and storage: liquid metal battery stability. PhD thesis, University of Greenwich.

Umeadi, Boniface B.N. (2010) An investigation into the potential of advanced sensor technology to support the maintenance of pipeline distribution systems. PhD thesis, University of Greenwich.

Woodcock, C. R. (1978) The flow of particulate bulk solids in an air-assisted gravity conveyor. PhD thesis, Thames Polytechnic.

Zhang, Taoyuan (2015) Sustainability consideration in machining of 2½d milled features. PhD thesis, University of Greenwich.

van Manen, P. (1984) The dynamic behaviour of rail vehicles operating at high speeds for manriding in British coal mines. PhD thesis, Thames Polytechnic.

Patent

114312 (2022) Medical suction pump controller - Certificate of Registration of Design No 360064-001. .

Video

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2023) Cassava dewatering machine. [Video] (Unpublished)

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2023) Cassava factory inside a shipping container. [Video] (Unpublished)

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2023) Cassava peeling machine [video]. [Video] (Unpublished)

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2021) Feeding system for cassava pneumatic drying - Part 1. [Video]

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2021) Feeding system for cassava pneumatic drying - Part 2. [Video]

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2023) Feeding system for cassava pneumatic drying - Part 3. [Video] (Unpublished)

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2020) Hand winch press for cassava dewatering. [Video]

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2020) Novel cassava dewatering equipment. [Video]

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2020) Solar-powered multipurpose hammermill. [Video]

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2021) Upgrading the flatbed dryer with a solar-powered system for Tanzanian smallholders - Part 1. [Video]

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2021) Upgrading the flatbed dryer with a solar-powered system for Tanzanian smallholders - Part 2. [Video]

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2021) Upgrading the flatbed dryer with a solar-powered system for Tanzanian smallholders - Part 3. [Video]

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2021) Upgrading the flatbed dryer with a solar-powered system for Tanzanian smallholders - Part 4. [Video]

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2021) Upgrading the flatbed dryer with a solar-powered system for Tanzanian smallholders - Part 5. [Video]

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2023) Using multiphysics to properly dimension pneumatic dryers. [Video] (Unpublished)

Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2023) Using multiphysics to simulate gari roasting process. [Video] (Unpublished)

Other

Nwajana, Augustine ORCID: 0000-0001-6591-5269 and Okafor, Patrick (2023) Call for Papers for Frontiers in Mechanical Engineering Special Issue: RFID and RF Circuits/Components. Frontiers Media.

Nwajana, Augustine O. ORCID: 0000-0001-6591-5269 (2024) Call for chapters: RFID, microwave circuit, and wireless power transfer enabling 5/6G communication. IGI Global - Information Resources Management Association, Hershey, PA, USA.

Parmar, Aditya ORCID: 0000-0002-2662-1900 and Precoppe, Marcelo ORCID: 0000-0002-7937-5782 (2021) Solar technology casts a bright future for improved cassava processing. Natural Resources Institute, University of Greenwich, London, University of Greenwich. (Unpublished)