Items where Subject is "T Technology > TS Manufactures"

A

Angulo Pinzon, O.A., Bradley, Michael S.A., Berry, Rob and Farnish, Richard J. (2008) Modelling dosator filling and discharge of powder. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 586-591. ISBN 9788272062896

Angulo Pinzon, Oscar Andres (2012) Modelling of dosator filling and discharge. PhD thesis, University of Greenwich.

Ariza-Zafra, K., Berry, Rob and Bradley, Michael S.A. (2008) Review of models for predicting the discharge rates of bulk particulates from silos and bins. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 484-492. ISBN 9788272062896

Aziz, Hayder, Li, Zhengxi and Gao, James (2008) Engineering design knowledge management in de-centralised virtual enterprises. Computer Aided Design and Applications, 5 (6). pp. 787-800. ISSN 1686-4360 (doi:10.3722/cadaps.2008.787-800)

Aziza-Zafra, Karol (2010) A hat trick for coal handling. International Bulk Journal, 5. pp. 67-70. ISSN 0260-1087

B

Baxter, David, Doultsinou, Athanasia, Roy, Rajkumar and Gao, James (2010) A life cycle model for product-service systems design. In: 5th International Conference on Digital Enterprise Technology. Publibook, Paris, France, pp. 441-456.

Baxter, David, Gao, James, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2008) A framework to integrate design knowledge reuse and requirements management in engineering design. Robotics and Computer-Integrated Manufacturing, 24 (4). pp. 585-593. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.010)

Baxter, David, Roy, Rajkumar, Doultsinou, Athanasia, Gao, James and Kalta, Mohamad (2009) A knowledge management framework to support product-service systems design. International Journal of Computer Integrated Manufacturing, 22 (12). pp. 1073-1088. ISSN 0951-192X (Print), 1362-3052 (Online) (doi:10.1080/09511920903207464)

Berkhauer-Smith, Samantha (2009) The integration of lean thinking and manufacturing business improvement methods within the aerospace supply chain. PhD thesis, University of Greenwich.

Berry, Rob, Bradley, Michael S.A., Farnish, Richard J. and Angulo Pinzon, O.A. (2008) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 344-350. ISBN 9788272062896

Berry, Rob, Bradley, Michael S.A., Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction test procedure, suitable for equipment design and powder characterisation. In: ICBMH Conference: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, Australia. (Unpublished)

Berry, R.J. and Bradley, M.S.A. (2010) Development of the Brookfield Powder Flow Tester. In: Bulk Solids Europe 2010 Conference and IMechE Symposium in New Frontiers in Bulk Materials Handling , 9-10 September 2010, Glasgow. (Submitted)

Bhatti, Rajinderpal and Berkhauer-Smith, Samantha (2007) Integrating both technical and cultural aspects of process improvement. In: 5th International Conference on Manufacturing Research (ICMR 2007) , 11- 13 September 2007, De Montfort University Leicester. (Unpublished)

Bhatti, Rajinderpal and Berkhauer-Smith, Samantha (2007) An integrated methodology of manufacturing business improvement strategies. In: Advances in production management systems. International Federation for Information Processing, 246 . Springer, Boston, USA, pp. 355-362. ISBN 9780387741567 (doi:10.1007/978-0-387-74157-4)

Bhatti, Rajinderpal, Chowdary, Boppana V. and Sahatoo, Divesh (2007) Some STL file generation issues in rapid prototyping. In: 5th Latin American and Caribbean Conference for Engineering and Technology Developing Entrepreneural Engineers for the Sustainable Growth of Latin American and Caribbean: Education, Innovation, Technology, and Practice. Latin American and Caribbean Consortium of Engineering Institutions, Florida. ISBN 098228960X

Bojarevics, Valdis, Easter, S., Roy, A. and Pericleous, Koulis A. (2009) Levitated liquid droplets in AC and DC magnetic field. In: International Symposium on Liquid Metal Processing and Casting - LMPC 2009. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 319-326. ISBN 978-0-87339-743-8

Bojarevics, Valdis, Roy, A., Easter, S. and Pericleous, Koulis A. (2009) Magnetic damping of levitated liquid droplets in AC and DC field. In: 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN 978-3-936104-65-3

Bojarevics, V. and Pericleous, K. (2005) Nonlinear MHD stability of aluminium reduction cells. In: The 15th Riga and 6th PAMIRConference on Fundamental and Applied MHD. MHD-Online, Institute of Physics, University of Latvia, pp. 87-90.

Bradley, Michael S.A. and Berry, Rob (2007) Investigation of the effect of test procedure factors on the failure loci and derived failure functions obtained from annular shear cells. Powder Technology, 174 (1-2). pp. 60-63. ISSN 0032-5910 (doi:10.1016/j.powtec.2006.10.023)

Bradley, Michael S.A., Berry, Rob, Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia. (Unpublished)

Bradley, Michael S.A., Berry, Rob and Pillai, John (2007) Comparison between the angles of wall friction measured on an on-line wall friction tester and the Jenike wall friction tester. Powder Technology, 174 (1-2). pp. 64-70. ISSN 0032-5910 (doi:10.1016/j.powtec.2006.10.024)

Bradley, Michael S.A., Berry, Rob, Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction tester and test procedure, suitable for equipment design and powder characterisation. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)

Bradley, Michael S.A., Farnish, Richard J., Reed, Alan R. and Kulkarni, Prasanna (2007) Evaluation of air induced segregation tendencies in pharmaceutical blends using a bench scale tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)

Bradley, Michael S.A., Reed, Alan R., Berry, Rob and Holmes, C.P.M. (2008) Start-up and running forces on bulk solids feeders: experimental findings versus available models. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 450-457. ISBN 9788272062896

Butler, Colin J. (2010) Internal and lateral communication in strategic alliance decision making. Management Decision, 48 (5). pp. 698-712. ISSN 0025 1747 (doi:10.1108/00251741011043885)

C

Campbell, Andrew Paul (2002) Modelling of freeze layer formation and refractory wear in direct smelting process. PhD thesis, University of Greenwich.

Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2008) Knowledge reuse in manufacturability analysis. Robotics and Computer Integrated Manufacturing, 24 (4). pp. 508-513. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.003)

Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2009) Manufacturing knowledge verification in design support systems. International Journal of Production Research, 47 (12). pp. 3179-3204. ISSN 0020-7543 (Print), 1366–588X (Online) (doi:10.1080/00207540701802452)

Cross, M., McBride, D., Croft, T.N., Williams, A.J., Pericleous, K. and Lawrence, J.A. (2006) Computational modeling of mold filling and related free-surface flows in shape casting: an overview of the challenges involved. Metallurgical and Materials Transactions B, 37 (6). pp. 879-885. ISSN 1073-5615 (Print), 1543-1916 (Online) (doi:10.1007/BF02735009)

D

Deng, Tong, Bradley, Michael S.A., Berry, Rob and Kostuch, J. (2008) Caking strength of granulated clay under frozen conditions. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 604-609. ISBN 9788272062896

Djambazov, G., Pericleous, K., Lebon, B., Doh, Y., Jardy, A., Chapelle, P., Ghazal, G. and Gardin , P. (2012) Investigation of a possible route for oxygen transport via the metal droplets in top-blown steel converters. In: International Symposium on Liquid Metal Processing and Casting (LMPC). Wiley International, pp. 159-166. ISBN 978-1-1180-0202-5 (In Press)

Doultsinou, Athanasia, Roy, Rajkumar, Baxter, David and Gao, James (2008) Key service issues in two UK manufacturing companies from a PSS perspective. In: Proceedings of the Cranfield Multi-Strand Conference: Creating Wealth Through Research and Innovation (CMC 2008): 6-7 May 2008. Cranfield University Press, Cranfield University, pp. 287-292. ISBN 9780955743672

Doultsinou, Athanasia, Roy, Rajkumar, Baxter, David, Gao, James and Mann, Andy (2009) Developing a service knowledge reuse framework for engineering design. Journal of Engineering Design, 20 (4). pp. 389-411. ISSN 0954-4828 (Print), 1466-1837 (Online) (doi:10.1080/09544820903149354)

Dupuis, Marc, Bojarevics, Valdis and Richard, Daniel (2008) Impact of the vertical potshell deformation on the MHD cell stability behavior of a 500 kA aluminium electrolysis cell. In: Light Metals 2008. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 409-412. ISBN 978-0-87339-710-0

Dupuis, Marc and Bojarevics, Valdis (2011) Retrofit of a 500 kA cell design into a 600 kA cell design. International Aluminium Journal, 87 (1/2). pp. 52-55. ISSN 0002-6689

Durairaj, Rajkumar, Mallik, Sabuj, Seman, Anton, Marks, Antony and Ekere, Ndy (2008) Investigation of wall-slip effect on paste release characteristic in flip-chip stencil printing process. In: 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1328-1333. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763615)

E

Eadie, R. and Gao, James (2008) An industrial implementation of a methodology for the optimisation of product design tolerances. In: Advances in manufacturing technology XXII: the proceedings of the 6th International Conference on Manufacturing Research ICMR08, 9th-11th September 2008, London UK. Brunel University College, Brunel University, pp. 161-170. ISBN 9781902316604

Easter, S., Bojarevics, Valdis and Pericleous, Koulis A. (2009) Determining surface tension using DC magnetic levitation. In: 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN 978-3-936104-65-3

Ermis, Ertan, Farnish, Richard J., Berry, Rob and Bradley, Michael S.A. (2008) Direct measurement of powder flavour adhesion on to a food surface using a novel adhesion tester. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 803-810. ISBN 9788272062896

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2009) Direct measurement of powder flavor adhesion onto crisp surface using a novel adhesion tester. Particulate Science and Technology, 27 (4). pp. 362-372. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:10.1080/02726350902994035)

F

Farnish, Richard J., Kulkarni, Prasanna and Bradley, Michael S.A. (2008) Segregation of bulk particulates through multiple process handling steps. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 505-510. ISBN 9788272062896

Fei, Genyuan (2011) A methodology for engineering design change analysis using system modelling and knowledge management technologies. PhD thesis, University of Greenwich.

Folinas, Dimitris and Manikas, Ioannis (2010) Design and development of an e-platform for supporting liquid food supply chain monitoring and traceability. International Journal of Information Systems and Supply Chain Management (IJISSCM), 3 (3). pp. 29-49. ISSN 1935-5726 (print), 1935-5734 (on-line) (doi:10.4018/jisscm.2010070103)

G

Gao, James and Baxter, David (2008) Editorial for the special issue of RCIM for ICMR2005: Third International Conference on Manufacturing Research, Cranfield University, September 6th–9th 2005, Cranfield, UK. Robotics and Computer-Integrated Manufacturing, 24 (4). pp. 499-500. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.001)

Gao, James and Baxter, David (2007) Enabling technologies and frameworks for new product development: a selection of papers from ICMR2005. International Journal of Production Research, 45 (7). pp. 1485-1487. ISSN 0020-7543 (doi:10.1080/00207540600942201)

Gao, James, Baxter, David, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2007) An engineering design knowledge reuse methodology using process modelling. Research in Engineering Design, 18 (1). pp. 37-48. ISSN 0934-9839 (doi:10.1007/s00163-007-0028-8)

Gao, James, Baxter, David, Doultsinou, Nancy and Roy, Rajkumar (2007) Identification of service knowledge types for technical product-service systems. In: Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath, pp. 549-555.

Gao, James, Baxter, David and Roy, Rajkumar (2009) Managing knowledge within the manufacturing enterprise: an overview. International Journal of Manufacturing Technology and Management (IJMTM), 18 (2). pp. 183-209. ISSN 1368-2148 (doi:10.1504/IJMTM.2009.026193)

Gao, James, Baxter, David and Roy, Rajkumar (2007) Specifying a design life cycle knowledge reuse framework part 1: manufacturing knowledge. In: Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.

Gao, James and Bradfield, Daniel J. (2007) A methodology to facilitate knowledge sharing in the new product development process. International Journal of Production Research, 45 (7). pp. 1489-1504. ISSN 0020-7543 (doi:10.1080/00207540600942227)

Gao, James, Bradfield, Daniel J. and Soltan, Hossein (2007) Development of a tool to support the dissemination of information about knowledge in multilingual product development teams. In: Proceedings of the International conference on product lifecycle management: assessing the industrial relevance. Inderscience Enterprises Ltd, Genva Aeroport, pp. 261-270. ISBN 9780907776321

Gao, James, Bradfield, Daniel J. and Soltan, Hossein (2007) A metaknowledge approach to facilitate knowledge sharing in the global product development process. Computer-Aided Design and Applications, 4 (1-4). pp. 519-528. ISSN 1686-4360 (doi:10.3722/cadaps.2007.519-528)

Gao, James, Fei, Genyuan and Tang, X.Q. (2009) A TRIZ based methodology for the analysis of the coupling problems in complex engineering design. In: Proceedings of the 19th CIRP Design Conference – Competitive Design, 30-31 March 2009. Cranfield University Press, Cranfield University, pp. 285-292. ISBN 9780955743641

Gao, James and Jian, Amanda (2007) A multi-agent based knowledge search methodology for product development. In: Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.

Gao, James and Kuang, Li (2007) A framework to integrate manufacturing information systems. In: Digital enterprise technology perspectives and future challenges. Springer, New York, pp. 369-376. ISBN 9780387498638 (doi:10.1007/978-0-387-49864-5)

Gao, James and Sharma , R. (2007) A knowledge-based manufacturing and cost evaluation system for product design/re-design. The International Journal of Advanced Manufacturing Technology, 33 (9-10). pp. 856-865. ISSN 0268-3768 (doi:10.1007/s00170-006-0530-6)

Gao, James, Zhang, Pengcheng, Baxter, David and Kalta, Mo (2007) Developing a design process model for the reuse of knowledge. In: Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.

Gueded, Jose and Mateus, Cesario (2009) Trade credit linkages along the supply chain: evidence for the Italian textile sector. In: European Financial Management Association 2009 Annual Meetings, 24-27 Jun 2009, Milan, Italy.

H

Harding, R. A., Wickins, M, Bojarevics, Valdis and Pericleous, Kyriacos (2003) Obtaining data to validate a model of an induction skull melting furnace. In: Modeling of Casting, Welding and Advanced Solidification Processes. TMS, Destin, FL , pp. 741-748. ISBN 0873395557

Harding, R.A., Wickins, M., Keough, G., Roberts, R.J., Pericleous, Kyriacos and Bojarevics, Valdis (2005) The use of combined DC and AC fields to increase superheat in an induction skull melting furnace. In: LMPC 2005 : proceedings of the 2005 international symposium on liquid metal processing and casting : Santa Fe, New Mexico, USA, September 18-21, 2005. ASM International, Materials Park, Ohio, USA, pp. 201-210. ISBN 0871708272; 978-087170827-4

J

Jian, Guo, Gao, James and Wang, Yinglin (2010) A multi-agent based knowledge search framework to support the product development process. International Journal of Computer Integrated Manufacturing, 23 (3). pp. 237-247. ISSN 0951-192X (doi:10.1080/09511920903529222)

Jian, Guo (2011) Knowledge search for new product development: a multi-agent based methodology. PhD thesis, University of Greenwich.

Jones, Keith and Sharp, Mark (2007) A new performance-based process model for built asset maintenance. Facilities, 25 (13/14). pp. 525-535. ISSN 0263-2772 (doi:10.1108/02632770710822616)

K

Kao, Andrew, Pericleous, Koulis A., Patel, Mayur and Voller, V. (2009) Thermoelectric MHD effects on equiaxed crystal morphology. In: 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN Forschungszentrum Dresden-Rossendorf

Kao, A., Pericleous, K., Patel, M.K. and Voller, V. (2009) Effects of magnetic fields on crystal growth. International Journal of Cast Metals Research, 22 (1-4). pp. 147-150. ISSN 1364-0461 (Print), 1743-1336 (Online) (doi:10.1179/136404609X367551)

Kao, Andrew, Pericleous, Koulis A., Patel, Mayur K. and Voller, Vaughan R. (2010) Thermoelectric effects on alloy solidification microstructure. In: Modeling of Casting, Welding, and Advanced Solidification Processes. John Wiley & Sons, Inc. / The Minerals, Metals & Materials Society, Warrendale, PA, USA, pp. 521-528. ISBN 978-0-87339-742-1 (hbk)

Kuenzel, Sven and Vaux Halliday, Sue (2010) The chain of effects from reputation and brand personality congruence to brand loyalty: The role of brand identification. Journal of Targeting, Measurement and Analysis for Marketing, 18. pp. 167-176. ISSN 0967 3237 (doi:10.1057/jt.2010.15)

L

Lawrence, James Andrew (2004) The prediction of bubble defects in castings. PhD thesis, University of Greenwich.

Le, C.H., Okereke, M.I., Nguyen, V.H., Dao, V.D., Soe, S., Zlatov, N. and Le, T.H. (2011) Personalised medical product development: Methods, challenges and opportunities. Romanian Review Precision Mechanics, Optics and Mechatronics, 40. pp. 11-20. ISSN 1584-5982

Li, Chun-Qing and Shao, L. (2007) Reliability based asset management strategy for concrete infrastructure. International Journal of Materials and Structural Reliability, 5 (1). pp. 13-28.

M

Majcen, Natasa, Snowden, Martin, Mitchell, John C., Cornelius, Victoria J. and Voncina, Bojana (2005) The development of smart fabrics. Journal of Pharmacy and Pharmacology, 57 (Suppl.). S58-S58. ISSN Online ISSN: 2042-7158

Mallik, Sabuj, Ekere, Ndy, Marks, Antony, Seman, Anton and Durairaj, Rajkumar (2008) Modelling of the time-dependent flow behaviour of lead-free solder pastes used for flip-chip assembly applications. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 1219-1224. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684527)

Mallik, Sabuj, Schmidt, M., Bauer, R. and Ekere, Ndy (2008) Influence of solder paste components on rheological behaviour. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, USA, pp. 1135-1140. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684512)

Manos, Basil and Manikas, Ioannis (2010) Traceability in the Greek fresh produce sector: drivers and constraints. British Food Journal, 112 (6). pp. 640-652. ISSN 0007-070X (doi:DOI 10.1108/00070701011052727)

Marks, A.E., Mallik, S., Ekere, N.N. and Seman, A. (2008) Effect of temperature on slumping behaviour of lead-free solder paste and its rheological simulation. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 829-832. ISBN 97814244-28137 (Print), 978-1-4244-2814-4 (Electronic) (doi:10.1109/ESTC.2008.4684459)

Mayur, Yaul, Bhatti, Rajinderpal and Lawrence, Stephen (2008) Evaluating the process of borosilicate glass capillaries used for fabrication of in-vitro fertilization (IVF) micro-pipettes. Biomedical Microdevices, 10 (1). pp. 123-128. ISSN 1387-2176 (doi:10.1007/s10544-007-9117-8)

Mountney, S.L., Gao, James and Wiseall, S. (2007) A knowledge system to support manufacturing knowledge during preliminary design. International Journal of Production Research, 45 (7). pp. 1521-1537. ISSN 0020-7543 (doi:10.1080/00207540600942300)

N

Narania, Sailesh, Eshahawi, Tarek, Gindy, Nabil, Tang, Ying Kit, Stoyanov, Stoyan, Ridout, Stephen and Bailey, Chris (2008) Risk mitigation framework for a robust design process. In: 2nd Electronics System-Integration Technology Conference, 2008. ESTC 2008. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1075-1080. ISBN 978-1-4244-2814-4 (Print), 978-1-4244-2813-7 (Online) (doi:10.1109/ESTC.2008.4684501)

O

Owonikoko, A., Berry, R.J. and Bradley, M.S.A. (2010) Characterisation of extreme shape materials: “biomass and waste materials”. In: Bulk Solids Europe 2010 Conference and IMechE Symposium in New Frontiers in Bulk Materials Handling , 9-10 September 2010, Glasgow. (Submitted)

P

Pericleous, Koulis A., Djambazov, Georgi, Bojarevics, Valdis and Ward, R.M. (2009) A unified 3D model of the VAR process. In: International Symposium on Liquid Metal Processing and Casting - LMPC 2009. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 21-28. ISBN 978-0-87339-743-8

R

Rizzuto, J.P. and Larsen, O.Popovic (2010) Connection systems in reciprocal frames and mutually supported elements space structure networks. International Journal of Space Structures, 25 (4). pp. 243-256. ISSN 0266-3511 (Submitted) (doi:10.1260/0266-3511.25.4.243)

Robinson, R., Kingman, S., Snape, C., Bradley, M., Bradshaw, S., Thomas, D. and Page, P. (2009) Microwave treatment of oil-contaminated drill cuttings at pilot scale. SPE Drilling and Completion, 24 (3). pp. 430-435. ISSN 1064-6671 (print), 1930-0204 (online) (doi:10.2118/111637-PA)

Roy, A.A., Easter, S., Bojarevics, V. and Pericleous, K. (2012) Use of a static magnetic field in measuring the thermal conductivity of a levitated molten droplet. Journal of Algorithms and Computational Technology, 6 (1). pp. 153-172. ISSN 1748-3018 (Print) (doi:10.1260/1748-3018.6.1.153)

S

Saeed, Soran (2006) An investigation into establishing a generalised approach for defining similarity metrics between 3D shapes for case-based reasoning (CBR). PhD thesis, University of Greenwich.

Saghiri, Soroosh (2007) Critical role of supply chain decoupling point in mass customization from its upstream and downstream information systems point of view. In: Mass Customization Information Systems in Business. IGI Global, London, UK, pp. 185-196. ISBN 978-1-59904-039-4 (doi:10.4018/978-1-59904-039-4)

Sahatoo, Divesh, Chowdary, Boppana V., Ali, Fahraz F. and Bhatti, Rajinderpal (2008) Slicing issues in CAD translation to STL in rapid prototyping. In: Proceedings of The 2008 IAJC-IJME International Conference. International Association of Journals and Conferences/International Journal of Modern Engineering, California State University, Northridge. ISBN 9781606433799

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) Development of an in-situ, non-destructive ultrasonic monitoring technique for solder pastes. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 209-214. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684351)

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) In-situ non-destructive ultrasonic rheology technique for monitoring different lead-free solder pastes for surface mount applications. In: 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1448-1454. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763635)

Seman, Anton (2010) On-line non-destructive ultrasonic rheology measurement of solder pastes. PhD thesis, University of Greenwich.

Sharp, Mark (2008) Expectations of inefficiency in the built asset maintenance process. PhD thesis, University of Greenwich.

Shehu, T. and Bhatti, R.S. (2012) The use of Yam flour (starch) as binder for sand mould production in Nigeria. World Applied Sciences Journal, 16 (6). pp. 858-862. ISSN 1818-495 (doi:wasj/wasj16(6)12/14.pdf)

Shimasaki, S., Imanishi, K., Taniguchi, S. and Bojarevics, Valdis (2009) Manufacturing of uniformly-sized silicon particles for solar cell from molten metal jet by electromagnetic pinch force. In: 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN Forschungszentrum Dresden-Rossendorf

T

Tang, Ying Kit (2012) A risk analysis methodology for micro/nano manufacturing. PhD thesis, University of Greenwich.

Taniguchi, S., Shimasaki, S., Park, J.S., Ueno, K. and Bojarevics, Valdis (2009) Prospect for EPM application to environmental technology. In: 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN 978-3-936104-65-3

Tian, Kun V., Nagy, Peter M., Chass, Gregory A., Fejerdy, Pal, Nicholson, John W., Csizmadia, Imre G. and Dobo´-Nagy, Csaba (2012) Qualitative assessment of microstructure and Hertzian indentation failure in biocompatible glass ionomer cements. Journal of Materials Science: Materials in Medicine, 23. pp. 677-685. ISSN 0957-4530 (Print), 1573-4838 (Online) (doi:10.1007/s10856-012-4553-2)

Tian, Wei and Zhou, Li (2012) Comparison of supply chain consigning collaborative innovation modes. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 407-411. ISSN 1022-6680 (doi:10.4028/www.scientific.net/AMR.452-453.407)

W

Wang, H., Djambazov, G., Pericleous, K., Harding, R.A. and Wickins, M. (2012) Numerical modelling of tilt casting process for γ-TiAl alloys. International Journal of Cast Metals Research, 25 (2). pp. 65-74. ISSN 1364-0461 (Print), 1743-1336 (Online) (doi:10.1179/1743133611Y.0000000024)

Wang, Hong (2008) Numerical modelling of the tilt casting processes of titanium alumindes. PhD thesis, University of Greenwich.

Wang, Hong, Djambazov, Georgi, Pericleous, Koulis A., Harding, Richard A. and Wickins, Michael (2010) Modelling the tilt-casting process for the tranquil filling of titanium alloy turbine blades. In: Modeling of Casting, Welding, and Advanced Solidification Processes - XII (MCWASP XII). John Wiley and SOns, Inc. / The Minerals, Metals & Materials Society (TMS), Warrendale, PA, USA, pp. 53-60. ISBN 978-0-87339-742-1

Y

Yin, Chunyan (2006) Experimental and modelling analysis on the performance of anisotropic conductive films as used in electronics packaging. PhD thesis, University of Greenwich.

Yuan, L., Lee, Peter D., Djambazov, Georgi and Pericleous, Koulis A. (2009) Multiscale modeling of the onset of freckle formation during vacuum arc remelting. In: International Symposium on Liquid Metal Processing and Casting - LMPC 2009. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 39-46. ISBN 978-0-87339-743-8

Yuan, Lang, Lee, Peter D., Djambazov, Georgi and Pericleous, Koulis A. (2010) Three-dimensional simulation of the influence of convection on dendritic solidification. In: Modeling of Casting, Welding, and Advanced Solidification Processes - XII (MCWASP XII). John Wiley & Sons, Inc. / The Minerals, Metals & Materials Society, Warrendale, PA, USA, pp. 451-458. ISBN 978-0-87339-742-1 (hbk)

Z

Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.

Zhou, X.Z., Zheng, J.J. and Li, Chun-Qing (2006) An analytical method for prediction of the elastic modulus of concrete. Magazine of Concrete Research, 58 (10). pp. 665-673. ISSN 0024-9831 (doi:10.1680/macr.2006.58.10.665)

Zhou, Li, Xie, Jiaping and Lin, Yong (2010) Forecasting returns in reverse logistics using GERT network theory. In: Responsive Manufacturing - Green Manufacturing (ICRM 2010). International Conference on Responsive Manufacturing - Green Manufacturing . IEEE Xplore Digital Library, Ningbo, pp. 349-356. (doi:10.1049/cp.2010.0456)

Zhu, Haihua, Gao, James, Li, Dongbo and Tang, Dunbing (2012) A Web-based Product Service System for aerospace maintenance, repair and overhaul services. Computers in Industry, 63 (4). pp. 338-348. ISSN 0166-3615 (doi:10.1016/j.compind.2012.02.016)