Items where Subject is "T Technology > TS Manufactures"
 | Up a level |
- Library of Congress Subject Areas (5713)
- T Technology (1112)
- TS Manufactures (106)
- T Technology (1112)
3D computational model
Wang, H., Djambazov, G., Pericleous, K., Harding, R.A. and Wickins, M. (2012) Numerical modelling of tilt casting process for γ-TiAl alloys. International Journal of Cast Metals Research, 25 (2). pp. 65-74. ISSN 1364-0461 (Print), 1743-1336 (Online) (doi:10.1179/1743133611Y.0000000024)
3D shapes
Saeed, Soran (2006) An investigation into establishing a generalised approach for defining similarity metrics between 3D shapes for case-based reasoning (CBR). PhD thesis, University of Greenwich.
500 kA reduction cell
Dupuis, Marc, Bojarevics, Valdis and Richard, Daniel (2008) Impact of the vertical potshell deformation on the MHD cell stability behavior of a 500 kA aluminium electrolysis cell. In: Light Metals 2008. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 409-412. ISBN 978-0-87339-710-0
ACF
Yin, Chunyan (2006) Experimental and modelling analysis on the performance of anisotropic conductive films as used in electronics packaging. PhD thesis, University of Greenwich.
adhesion
Ermis, Ertan, Farnish, Richard J., Berry, Rob and Bradley, Michael S.A. (2008) Direct measurement of powder flavour adhesion on to a food surface using a novel adhesion tester. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 803-810. ISBN 9788272062896
Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2009) Direct measurement of powder flavor adhesion onto crisp surface using a novel adhesion tester. Particulate Science and Technology, 27 (4). pp. 362-372. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:10.1080/02726350902994035)
advanced solidification processes
Harding, R. A., Wickins, M, Bojarevics, Valdis and Pericleous, Kyriacos (2003) Obtaining data to validate a model of an induction skull melting furnace. In: Modeling of Casting, Welding and Advanced Solidification Processes. TMS, Destin, FL , pp. 741-748. ISBN 0873395557
aerospace
Berkhauer-Smith, Samantha (2009) The integration of lean thinking and manufacturing business improvement methods within the aerospace supply chain. PhD thesis, University of Greenwich.
aerospace manufacturing
Zhu, Haihua, Gao, James, Li, Dongbo and Tang, Dunbing (2012) A Web-based Product Service System for aerospace maintenance, repair and overhaul services. Computers in Industry, 63 (4). pp. 338-348. ISSN 0166-3615 (doi:10.1016/j.compind.2012.02.016)
agent construction tools
Jian, Guo, Gao, James and Wang, Yinglin (2010) A multi-agent based knowledge search framework to support the product development process. International Journal of Computer Integrated Manufacturing, 23 (3). pp. 237-247. ISSN 0951-192X (doi:10.1080/09511920903529222)
agent technology
Jian, Guo (2011) Knowledge search for new product development: a multi-agent based methodology. PhD thesis, University of Greenwich.
aggregate
Zhou, X.Z., Zheng, J.J. and Li, Chun-Qing (2006) An analytical method for prediction of the elastic modulus of concrete. Magazine of Concrete Research, 58 (10). pp. 665-673. ISSN 0024-9831 (doi:10.1680/macr.2006.58.10.665)
algorithms
Saeed, Soran (2006) An investigation into establishing a generalised approach for defining similarity metrics between 3D shapes for case-based reasoning (CBR). PhD thesis, University of Greenwich.
aluminimum
Dupuis, Marc and Bojarevics, Valdis (2011) Retrofit of a 500 kA cell design into a 600 kA cell design. International Aluminium Journal, 87 (1/2). pp. 52-55. ISSN 0002-6689
amplitude axial translational oscillations
Roy, A.A., Easter, S., Bojarevics, V. and Pericleous, K. (2012) Use of a static magnetic field in measuring the thermal conductivity of a levitated molten droplet. Journal of Algorithms and Computational Technology, 6 (1). pp. 153-172. ISSN 1748-3018 (Print) (doi:10.1260/1748-3018.6.1.153)
analytical models
Easter, S., Bojarevics, Valdis and Pericleous, Koulis A. (2009) Determining surface tension using DC magnetic levitation. In: 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN 978-3-936104-65-3
anisotropic conductive film
Yin, Chunyan (2006) Experimental and modelling analysis on the performance of anisotropic conductive films as used in electronics packaging. PhD thesis, University of Greenwich.
annular shear cell
Bradley, Michael S.A. and Berry, Rob (2007) Investigation of the effect of test procedure factors on the failure loci and derived failure functions obtained from annular shear cells. Powder Technology, 174 (1-2). pp. 60-63. ISSN 0032-5910 (doi:10.1016/j.powtec.2006.10.023)
annular wall friction tester
Bradley, Michael S.A., Berry, Rob, Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction tester and test procedure, suitable for equipment design and powder characterisation. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)
attenuation
Durairaj, Rajkumar, Mallik, Sabuj, Seman, Anton, Marks, Antony and Ekere, Ndy (2008) Investigation of wall-slip effect on paste release characteristic in flip-chip stencil printing process. In: 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1328-1333. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763615)
Mallik, Sabuj, Schmidt, M., Bauer, R. and Ekere, Ndy (2008) Influence of solder paste components on rheological behaviour. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, USA, pp. 1135-1140. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684512)
Marks, A.E., Mallik, S., Ekere, N.N. and Seman, A. (2008) Effect of temperature on slumping behaviour of lead-free solder paste and its rheological simulation. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 829-832. ISBN 97814244-28137 (Print), 978-1-4244-2814-4 (Electronic) (doi:10.1109/ESTC.2008.4684459)
Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) Development of an in-situ, non-destructive ultrasonic monitoring technique for solder pastes. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 209-214. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684351)
Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) In-situ non-destructive ultrasonic rheology technique for monitoring different lead-free solder pastes for surface mount applications. In: 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1448-1454. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763635)
automotive product development
Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.
axiomatic design
Gao, James, Fei, Genyuan and Tang, X.Q. (2009) A TRIZ based methodology for the analysis of the coupling problems in complex engineering design. In: Proceedings of the 19th CIRP Design Conference – Competitive Design, 30-31 March 2009. Cranfield University Press, Cranfield University, pp. 285-292. ISBN 9780955743641
Bill of Material (BOM)
Zhou, Li, Xie, Jiaping and Lin, Yong (2010) Forecasting returns in reverse logistics using GERT network theory. In: Responsive Manufacturing - Green Manufacturing (ICRM 2010). International Conference on Responsive Manufacturing - Green Manufacturing . IEEE Xplore Digital Library, Ningbo, pp. 349-356. (doi:10.1049/cp.2010.0456)
binary alloy
Kao, A., Pericleous, K., Patel, M.K. and Voller, V. (2009) Effects of magnetic fields on crystal growth. International Journal of Cast Metals Research, 22 (1-4). pp. 147-150. ISSN 1364-0461 (Print), 1743-1336 (Online) (doi:10.1179/136404609X367551)
binder
Shehu, T. and Bhatti, R.S. (2012) The use of Yam flour (starch) as binder for sand mould production in Nigeria. World Applied Sciences Journal, 16 (6). pp. 858-862. ISSN 1818-495 (doi:wasj/wasj16(6)12/14.pdf)
bio-powder
Ermis, Ertan, Farnish, Richard J., Berry, Rob and Bradley, Michael S.A. (2008) Direct measurement of powder flavour adhesion on to a food surface using a novel adhesion tester. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 803-810. ISBN 9788272062896
Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2009) Direct measurement of powder flavor adhesion onto crisp surface using a novel adhesion tester. Particulate Science and Technology, 27 (4). pp. 362-372. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:10.1080/02726350902994035)
biocompatible glass ionomer cement
Tian, Kun V., Nagy, Peter M., Chass, Gregory A., Fejerdy, Pal, Nicholson, John W., Csizmadia, Imre G. and Dobo´-Nagy, Csaba (2012) Qualitative assessment of microstructure and Hertzian indentation failure in biocompatible glass ionomer cements. Journal of Materials Science: Materials in Medicine, 23. pp. 677-685. ISSN 0957-4530 (Print), 1573-4838 (Online) (doi:10.1007/s10856-012-4553-2)
biomass
Owonikoko, A., Berry, R.J. and Bradley, M.S.A. (2010) Characterisation of extreme shape materials: “biomass and waste materials”. In: Bulk Solids Europe 2010 Conference and IMechE Symposium in New Frontiers in Bulk Materials Handling , 9-10 September 2010, Glasgow. (Submitted)
borosilicate glass
Mayur, Yaul, Bhatti, Rajinderpal and Lawrence, Stephen (2008) Evaluating the process of borosilicate glass capillaries used for fabrication of in-vitro fertilization (IVF) micro-pipettes. Biomedical Microdevices, 10 (1). pp. 123-128. ISSN 1387-2176 (doi:10.1007/s10544-007-9117-8)
brand identification
Kuenzel, Sven and Vaux Halliday, Sue (2010) The chain of effects from reputation and brand personality congruence to brand loyalty: The role of brand identification. Journal of Targeting, Measurement and Analysis for Marketing, 18. pp. 167-176. ISSN 0967 3237 (doi:10.1057/jt.2010.15)
brand personality congruence
Kuenzel, Sven and Vaux Halliday, Sue (2010) The chain of effects from reputation and brand personality congruence to brand loyalty: The role of brand identification. Journal of Targeting, Measurement and Analysis for Marketing, 18. pp. 167-176. ISSN 0967 3237 (doi:10.1057/jt.2010.15)
bubble formation
Lawrence, James Andrew (2004) The prediction of bubble defects in castings. PhD thesis, University of Greenwich.
built asset maintenance
Sharp, Mark (2008) Expectations of inefficiency in the built asset maintenance process. PhD thesis, University of Greenwich.
bulk modulus
Zhou, X.Z., Zheng, J.J. and Li, Chun-Qing (2006) An analytical method for prediction of the elastic modulus of concrete. Magazine of Concrete Research, 58 (10). pp. 665-673. ISSN 0024-9831 (doi:10.1680/macr.2006.58.10.665)
bulk particulates
Ariza-Zafra, K., Berry, Rob and Bradley, Michael S.A. (2008) Review of models for predicting the discharge rates of bulk particulates from silos and bins. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 484-492. ISBN 9788272062896
Farnish, Richard J., Kulkarni, Prasanna and Bradley, Michael S.A. (2008) Segregation of bulk particulates through multiple process handling steps. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 505-510. ISBN 9788272062896
bulk solids
Bradley, Michael S.A., Farnish, Richard J., Reed, Alan R. and Kulkarni, Prasanna (2007) Evaluation of air induced segregation tendencies in pharmaceutical blends using a bench scale tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)
Bradley, Michael S.A., Reed, Alan R., Berry, Rob and Holmes, C.P.M. (2008) Start-up and running forces on bulk solids feeders: experimental findings versus available models. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 450-457. ISBN 9788272062896
bulk solids handling
Berry, Rob, Bradley, Michael S.A., Farnish, Richard J. and Angulo Pinzon, O.A. (2008) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 344-350. ISBN 9788272062896
Bradley, Michael S.A., Berry, Rob, Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia. (Unpublished)
Bradley, Michael S.A., Berry, Rob, Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction tester and test procedure, suitable for equipment design and powder characterisation. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)
business
Saghiri, Soroosh (2007) Critical role of supply chain decoupling point in mass customization from its upstream and downstream information systems point of view. In: Mass Customization Information Systems in Business. IGI Global, London, UK, pp. 185-196. ISBN 978-1-59904-039-4 (doi:10.4018/978-1-59904-039-4)
business improvement methods
Berkhauer-Smith, Samantha (2009) The integration of lean thinking and manufacturing business improvement methods within the aerospace supply chain. PhD thesis, University of Greenwich.
business planning
Jones, Keith and Sharp, Mark (2007) A new performance-based process model for built asset maintenance. Facilities, 25 (13/14). pp. 525-535. ISSN 0263-2772 (doi:10.1108/02632770710822616)
business process
Gao, James and Bradfield, Daniel J. (2007) A methodology to facilitate knowledge sharing in the new product development process. International Journal of Production Research, 45 (7). pp. 1489-1504. ISSN 0020-7543 (doi:10.1080/00207540600942227)
business process modeling
Folinas, Dimitris and Manikas, Ioannis (2010) Design and development of an e-platform for supporting liquid food supply chain monitoring and traceability. International Journal of Information Systems and Supply Chain Management (IJISSCM), 3 (3). pp. 29-49. ISSN 1935-5726 (print), 1935-5734 (on-line) (doi:10.4018/jisscm.2010070103)
CAD
Eadie, R. and Gao, James (2008) An industrial implementation of a methodology for the optimisation of product design tolerances. In: Advances in manufacturing technology XXII: the proceedings of the 6th International Conference on Manufacturing Research ICMR08, 9th-11th September 2008, London UK. Brunel University College, Brunel University, pp. 161-170. ISBN 9781902316604
Cartesian axes
Tian, Kun V., Nagy, Peter M., Chass, Gregory A., Fejerdy, Pal, Nicholson, John W., Csizmadia, Imre G. and Dobo´-Nagy, Csaba (2012) Qualitative assessment of microstructure and Hertzian indentation failure in biocompatible glass ionomer cements. Journal of Materials Science: Materials in Medicine, 23. pp. 677-685. ISSN 0957-4530 (Print), 1573-4838 (Online) (doi:10.1007/s10856-012-4553-2)
case study
Gao, James, Baxter, David and Roy, Rajkumar (2007) Specifying a design life cycle knowledge reuse framework part 1: manufacturing knowledge. In: Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.
case-based reasoning
Saeed, Soran (2006) An investigation into establishing a generalised approach for defining similarity metrics between 3D shapes for case-based reasoning (CBR). PhD thesis, University of Greenwich.
casting
Harding, R. A., Wickins, M, Bojarevics, Valdis and Pericleous, Kyriacos (2003) Obtaining data to validate a model of an induction skull melting furnace. In: Modeling of Casting, Welding and Advanced Solidification Processes. TMS, Destin, FL , pp. 741-748. ISBN 0873395557
casting design
Saeed, Soran (2006) An investigation into establishing a generalised approach for defining similarity metrics between 3D shapes for case-based reasoning (CBR). PhD thesis, University of Greenwich.
casting process
Lawrence, James Andrew (2004) The prediction of bubble defects in castings. PhD thesis, University of Greenwich.
CBR
Saeed, Soran (2006) An investigation into establishing a generalised approach for defining similarity metrics between 3D shapes for case-based reasoning (CBR). PhD thesis, University of Greenwich.
cell design
Dupuis, Marc and Bojarevics, Valdis (2011) Retrofit of a 500 kA cell design into a 600 kA cell design. International Aluminium Journal, 87 (1/2). pp. 52-55. ISSN 0002-6689
cement paste
Zhou, X.Z., Zheng, J.J. and Li, Chun-Qing (2006) An analytical method for prediction of the elastic modulus of concrete. Magazine of Concrete Research, 58 (10). pp. 665-673. ISSN 0024-9831 (doi:10.1680/macr.2006.58.10.665)
cement-based materials
Durairaj, Rajkumar, Mallik, Sabuj, Seman, Anton, Marks, Antony and Ekere, Ndy (2008) Investigation of wall-slip effect on paste release characteristic in flip-chip stencil printing process. In: 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1328-1333. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763615)
Mallik, Sabuj, Schmidt, M., Bauer, R. and Ekere, Ndy (2008) Influence of solder paste components on rheological behaviour. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, USA, pp. 1135-1140. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684512)
Marks, A.E., Mallik, S., Ekere, N.N. and Seman, A. (2008) Effect of temperature on slumping behaviour of lead-free solder paste and its rheological simulation. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 829-832. ISBN 97814244-28137 (Print), 978-1-4244-2814-4 (Electronic) (doi:10.1109/ESTC.2008.4684459)
Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) Development of an in-situ, non-destructive ultrasonic monitoring technique for solder pastes. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 209-214. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684351)
Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) In-situ non-destructive ultrasonic rheology technique for monitoring different lead-free solder pastes for surface mount applications. In: 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1448-1454. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763635)
CFD
Campbell, Andrew Paul (2002) Modelling of freeze layer formation and refractory wear in direct smelting process. PhD thesis, University of Greenwich.
change management
Fei, Genyuan (2011) A methodology for engineering design change analysis using system modelling and knowledge management technologies. PhD thesis, University of Greenwich.
coal
Aziza-Zafra, Karol (2010) A hat trick for coal handling. International Bulk Journal, 5. pp. 67-70. ISSN 0260-1087
coal handling
Aziza-Zafra, Karol (2010) A hat trick for coal handling. International Bulk Journal, 5. pp. 67-70. ISSN 0260-1087
Bradley, Michael S.A., Berry, Rob and Pillai, John (2007) Comparison between the angles of wall friction measured on an on-line wall friction tester and the Jenike wall friction tester. Powder Technology, 174 (1-2). pp. 64-70. ISSN 0032-5910 (doi:10.1016/j.powtec.2006.10.024)
coal industry
Aziza-Zafra, Karol (2010) A hat trick for coal handling. International Bulk Journal, 5. pp. 67-70. ISSN 0260-1087
coating
Ermis, Ertan, Farnish, Richard J., Berry, Rob and Bradley, Michael S.A. (2008) Direct measurement of powder flavour adhesion on to a food surface using a novel adhesion tester. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 803-810. ISBN 9788272062896
collaborative innovation modes
Tian, Wei and Zhou, Li (2012) Comparison of supply chain consigning collaborative innovation modes. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 407-411. ISSN 1022-6680 (doi:10.4028/www.scientific.net/AMR.452-453.407)
commercial package COMSOL
Roy, A.A., Easter, S., Bojarevics, V. and Pericleous, K. (2012) Use of a static magnetic field in measuring the thermal conductivity of a levitated molten droplet. Journal of Algorithms and Computational Technology, 6 (1). pp. 153-172. ISSN 1748-3018 (Print) (doi:10.1260/1748-3018.6.1.153)
communication
Butler, Colin J. (2010) Internal and lateral communication in strategic alliance decision making. Management Decision, 48 (5). pp. 698-712. ISSN 0025 1747 (doi:10.1108/00251741011043885)
computational fluid dynamics
Campbell, Andrew Paul (2002) Modelling of freeze layer formation and refractory wear in direct smelting process. PhD thesis, University of Greenwich.
computational modelling
Campbell, Andrew Paul (2002) Modelling of freeze layer formation and refractory wear in direct smelting process. PhD thesis, University of Greenwich.
computer modelling
Angulo Pinzon, Oscar Andres (2012) Modelling of dosator filling and discharge. PhD thesis, University of Greenwich.
Cross, M., McBride, D., Croft, T.N., Williams, A.J., Pericleous, K. and Lawrence, J.A. (2006) Computational modeling of mold filling and related free-surface flows in shape casting: an overview of the challenges involved. Metallurgical and Materials Transactions B, 37 (6). pp. 879-885. ISSN 1073-5615 (Print), 1543-1916 (Online) (doi:10.1007/BF02735009)
Tang, Ying Kit (2012) A risk analysis methodology for micro/nano manufacturing. PhD thesis, University of Greenwich.
computer reasoning
Saeed, Soran (2006) An investigation into establishing a generalised approach for defining similarity metrics between 3D shapes for case-based reasoning (CBR). PhD thesis, University of Greenwich.
computer-aided process planning
Gao, James and Sharma , R. (2007) A knowledge-based manufacturing and cost evaluation system for product design/re-design. The International Journal of Advanced Manufacturing Technology, 33 (9-10). pp. 856-865. ISSN 0268-3768 (doi:10.1007/s00170-006-0530-6)
conceptual design
Gao, James and Sharma , R. (2007) A knowledge-based manufacturing and cost evaluation system for product design/re-design. The International Journal of Advanced Manufacturing Technology, 33 (9-10). pp. 856-865. ISSN 0268-3768 (doi:10.1007/s00170-006-0530-6)
concrete structures
Li, Chun-Qing and Shao, L. (2007) Reliability based asset management strategy for concrete infrastructure. International Journal of Materials and Structural Reliability, 5 (1). pp. 13-28.
connection design
Rizzuto, J.P. and Larsen, O.Popovic (2010) Connection systems in reciprocal frames and mutually supported elements space structure networks. International Journal of Space Structures, 25 (4). pp. 243-256. ISSN 0266-3511 (Submitted) (doi:10.1260/0266-3511.25.4.243)
construction
Rizzuto, J.P. and Larsen, O.Popovic (2010) Connection systems in reciprocal frames and mutually supported elements space structure networks. International Journal of Space Structures, 25 (4). pp. 243-256. ISSN 0266-3511 (Submitted) (doi:10.1260/0266-3511.25.4.243)
contamination
Harding, R.A., Wickins, M., Keough, G., Roberts, R.J., Pericleous, Kyriacos and Bojarevics, Valdis (2005) The use of combined DC and AC fields to increase superheat in an induction skull melting furnace. In: LMPC 2005 : proceedings of the 2005 international symposium on liquid metal processing and casting : Santa Fe, New Mexico, USA, September 18-21, 2005. ASM International, Materials Park, Ohio, USA, pp. 201-210. ISBN 0871708272; 978-087170827-4
core firm
Tian, Wei and Zhou, Li (2012) Comparison of supply chain consigning collaborative innovation modes. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 407-411. ISSN 1022-6680 (doi:10.4028/www.scientific.net/AMR.452-453.407)
coupling analysis
Gao, James, Fei, Genyuan and Tang, X.Q. (2009) A TRIZ based methodology for the analysis of the coupling problems in complex engineering design. In: Proceedings of the 19th CIRP Design Conference – Competitive Design, 30-31 March 2009. Cranfield University Press, Cranfield University, pp. 285-292. ISBN 9780955743641
crisp coating
Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2009) Direct measurement of powder flavor adhesion onto crisp surface using a novel adhesion tester. Particulate Science and Technology, 27 (4). pp. 362-372. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:10.1080/02726350902994035)
crisps
Ermis, Ertan, Farnish, Richard J., Berry, Rob and Bradley, Michael S.A. (2008) Direct measurement of powder flavour adhesion on to a food surface using a novel adhesion tester. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 803-810. ISBN 9788272062896
cultural change
Bhatti, Rajinderpal and Berkhauer-Smith, Samantha (2007) Integrating both technical and cultural aspects of process improvement. In: 5th International Conference on Manufacturing Research (ICMR 2007) , 11- 13 September 2007, De Montfort University Leicester. (Unpublished)
decision making
Butler, Colin J. (2010) Internal and lateral communication in strategic alliance decision making. Management Decision, 48 (5). pp. 698-712. ISSN 0025 1747 (doi:10.1108/00251741011043885)
defects
Harding, R.A., Wickins, M., Keough, G., Roberts, R.J., Pericleous, Kyriacos and Bojarevics, Valdis (2005) The use of combined DC and AC fields to increase superheat in an induction skull melting furnace. In: LMPC 2005 : proceedings of the 2005 international symposium on liquid metal processing and casting : Santa Fe, New Mexico, USA, September 18-21, 2005. ASM International, Materials Park, Ohio, USA, pp. 201-210. ISBN 0871708272; 978-087170827-4
defence sector
Butler, Colin J. (2010) Internal and lateral communication in strategic alliance decision making. Management Decision, 48 (5). pp. 698-712. ISSN 0025 1747 (doi:10.1108/00251741011043885)
dendritic growth
Kao, A., Pericleous, K., Patel, M.K. and Voller, V. (2009) Effects of magnetic fields on crystal growth. International Journal of Cast Metals Research, 22 (1-4). pp. 147-150. ISSN 1364-0461 (Print), 1743-1336 (Online) (doi:10.1179/136404609X367551)
Yuan, Lang, Lee, Peter D., Djambazov, Georgi and Pericleous, Koulis A. (2010) Three-dimensional simulation of the influence of convection on dendritic solidification. In: Modeling of Casting, Welding, and Advanced Solidification Processes - XII (MCWASP XII). John Wiley & Sons, Inc. / The Minerals, Metals & Materials Society, Warrendale, PA, USA, pp. 451-458. ISBN 978-0-87339-742-1 (hbk)
dendritic-growth
Kao, Andrew, Pericleous, Koulis A., Patel, Mayur K. and Voller, Vaughan R. (2010) Thermoelectric effects on alloy solidification microstructure. In: Modeling of Casting, Welding, and Advanced Solidification Processes. John Wiley & Sons, Inc. / The Minerals, Metals & Materials Society, Warrendale, PA, USA, pp. 521-528. ISBN 978-0-87339-742-1 (hbk)
design
Baxter, David, Doultsinou, Athanasia, Roy, Rajkumar and Gao, James (2010) A life cycle model for product-service systems design. In: 5th International Conference on Digital Enterprise Technology. Publibook, Paris, France, pp. 441-456.
Baxter, David, Roy, Rajkumar, Doultsinou, Athanasia, Gao, James and Kalta, Mohamad (2009) A knowledge management framework to support product-service systems design. International Journal of Computer Integrated Manufacturing, 22 (12). pp. 1073-1088. ISSN 0951-192X (Print), 1362-3052 (Online) (doi:10.1080/09511920903207464)
Eadie, R. and Gao, James (2008) An industrial implementation of a methodology for the optimisation of product design tolerances. In: Advances in manufacturing technology XXII: the proceedings of the 6th International Conference on Manufacturing Research ICMR08, 9th-11th September 2008, London UK. Brunel University College, Brunel University, pp. 161-170. ISBN 9781902316604
design for manufacture
Baxter, David, Roy, Rajkumar, Doultsinou, Athanasia, Gao, James and Kalta, Mohamad (2009) A knowledge management framework to support product-service systems design. International Journal of Computer Integrated Manufacturing, 22 (12). pp. 1073-1088. ISSN 0951-192X (Print), 1362-3052 (Online) (doi:10.1080/09511920903207464)
Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2008) Knowledge reuse in manufacturability analysis. Robotics and Computer Integrated Manufacturing, 24 (4). pp. 508-513. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.003)
Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2009) Manufacturing knowledge verification in design support systems. International Journal of Production Research, 47 (12). pp. 3179-3204. ISSN 0020-7543 (Print), 1366–588X (Online) (doi:10.1080/00207540701802452)
design for service
Baxter, David, Roy, Rajkumar, Doultsinou, Athanasia, Gao, James and Kalta, Mohamad (2009) A knowledge management framework to support product-service systems design. International Journal of Computer Integrated Manufacturing, 22 (12). pp. 1073-1088. ISSN 0951-192X (Print), 1362-3052 (Online) (doi:10.1080/09511920903207464)
design knowledge reuse
Gao, James, Baxter, David, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2007) An engineering design knowledge reuse methodology using process modelling. Research in Engineering Design, 18 (1). pp. 37-48. ISSN 0934-9839 (doi:10.1007/s00163-007-0028-8)
design methodology
Baxter, David, Gao, James, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2008) A framework to integrate design knowledge reuse and requirements management in engineering design. Robotics and Computer-Integrated Manufacturing, 24 (4). pp. 585-593. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.010)
design process modelling
Gao, James, Zhang, Pengcheng, Baxter, David and Kalta, Mo (2007) Developing a design process model for the reuse of knowledge. In: Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.
design requirements
Doultsinou, Athanasia, Roy, Rajkumar, Baxter, David, Gao, James and Mann, Andy (2009) Developing a service knowledge reuse framework for engineering design. Journal of Engineering Design, 20 (4). pp. 389-411. ISSN 0954-4828 (Print), 1466-1837 (Online) (doi:10.1080/09544820903149354)
design reuse
Baxter, David, Gao, James, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2008) A framework to integrate design knowledge reuse and requirements management in engineering design. Robotics and Computer-Integrated Manufacturing, 24 (4). pp. 585-593. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.010)
Gao, James, Zhang, Pengcheng, Baxter, David and Kalta, Mo (2007) Developing a design process model for the reuse of knowledge. In: Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.
design support
Baxter, David, Gao, James, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2008) A framework to integrate design knowledge reuse and requirements management in engineering design. Robotics and Computer-Integrated Manufacturing, 24 (4). pp. 585-593. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.010)
discharge rates
Ariza-Zafra, K., Berry, Rob and Bradley, Michael S.A. (2008) Review of models for predicting the discharge rates of bulk particulates from silos and bins. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 484-492. ISBN 9788272062896
dosator filling machines
Angulo Pinzon, Oscar Andres (2012) Modelling of dosator filling and discharge. PhD thesis, University of Greenwich.
dosators
Angulo Pinzon, O.A., Bradley, Michael S.A., Berry, Rob and Farnish, Richard J. (2008) Modelling dosator filling and discharge of powder. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 586-591. ISBN 9788272062896
Angulo Pinzon, Oscar Andres (2012) Modelling of dosator filling and discharge. PhD thesis, University of Greenwich.
EAF
Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.
electric fields
Harding, R.A., Wickins, M., Keough, G., Roberts, R.J., Pericleous, Kyriacos and Bojarevics, Valdis (2005) The use of combined DC and AC fields to increase superheat in an induction skull melting furnace. In: LMPC 2005 : proceedings of the 2005 international symposium on liquid metal processing and casting : Santa Fe, New Mexico, USA, September 18-21, 2005. ASM International, Materials Park, Ohio, USA, pp. 201-210. ISBN 0871708272; 978-087170827-4
electromagnetic pinch force
Shimasaki, S., Imanishi, K., Taniguchi, S. and Bojarevics, Valdis (2009) Manufacturing of uniformly-sized silicon particles for solar cell from molten metal jet by electromagnetic pinch force. In: 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN Forschungszentrum Dresden-Rossendorf
electronics
Yin, Chunyan (2006) Experimental and modelling analysis on the performance of anisotropic conductive films as used in electronics packaging. PhD thesis, University of Greenwich.
engineering design
Baxter, David, Gao, James, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2008) A framework to integrate design knowledge reuse and requirements management in engineering design. Robotics and Computer-Integrated Manufacturing, 24 (4). pp. 585-593. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.010)
Fei, Genyuan (2011) A methodology for engineering design change analysis using system modelling and knowledge management technologies. PhD thesis, University of Greenwich.
enterprise architecture framework
Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.
enterprise integration
Gao, James, Baxter, David and Roy, Rajkumar (2009) Managing knowledge within the manufacturing enterprise: an overview. International Journal of Manufacturing Technology and Management (IJMTM), 18 (2). pp. 183-209. ISSN 1368-2148 (doi:10.1504/IJMTM.2009.026193)
enterprise knowledge
Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.
enterprise knowledge search
Jian, Guo (2011) Knowledge search for new product development: a multi-agent based methodology. PhD thesis, University of Greenwich.
enterprise modelling
Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2008) Knowledge reuse in manufacturability analysis. Robotics and Computer Integrated Manufacturing, 24 (4). pp. 508-513. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.003)
Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2009) Manufacturing knowledge verification in design support systems. International Journal of Production Research, 47 (12). pp. 3179-3204. ISSN 0020-7543 (Print), 1366–588X (Online) (doi:10.1080/00207540701802452)
enthalpy
Kao, A., Pericleous, K., Patel, M.K. and Voller, V. (2009) Effects of magnetic fields on crystal growth. International Journal of Cast Metals Research, 22 (1-4). pp. 147-150. ISSN 1364-0461 (Print), 1743-1336 (Online) (doi:10.1179/136404609X367551)
Kao, Andrew, Pericleous, Koulis A., Patel, Mayur K. and Voller, Vaughan R. (2010) Thermoelectric effects on alloy solidification microstructure. In: Modeling of Casting, Welding, and Advanced Solidification Processes. John Wiley & Sons, Inc. / The Minerals, Metals & Materials Society, Warrendale, PA, USA, pp. 521-528. ISBN 978-0-87339-742-1 (hbk)
environmental pollution rate
Bojarevics, V. and Pericleous, K. (2005) Nonlinear MHD stability of aluminium reduction cells. In: The 15th Riga and 6th PAMIRConference on Fundamental and Applied MHD. MHD-Online, Institute of Physics, University of Latvia, pp. 87-90.
environmental technologies
Taniguchi, S., Shimasaki, S., Park, J.S., Ueno, K. and Bojarevics, Valdis (2009) Prospect for EPM application to environmental technology. In: 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN 978-3-936104-65-3
EPM
Taniguchi, S., Shimasaki, S., Park, J.S., Ueno, K. and Bojarevics, Valdis (2009) Prospect for EPM application to environmental technology. In: 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN 978-3-936104-65-3
equiaxed crystal morphology
Kao, Andrew, Pericleous, Koulis A., Patel, Mayur and Voller, V. (2009) Thermoelectric MHD effects on equiaxed crystal morphology. In: 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN Forschungszentrum Dresden-Rossendorf
equipment design
Berry, Rob, Bradley, Michael S.A., Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction test procedure, suitable for equipment design and powder characterisation. In: ICBMH Conference: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, Australia. (Unpublished)
failure function
Bradley, Michael S.A. and Berry, Rob (2007) Investigation of the effect of test procedure factors on the failure loci and derived failure functions obtained from annular shear cells. Powder Technology, 174 (1-2). pp. 60-63. ISSN 0032-5910 (doi:10.1016/j.powtec.2006.10.023)
FEA
Yin, Chunyan (2006) Experimental and modelling analysis on the performance of anisotropic conductive films as used in electronics packaging. PhD thesis, University of Greenwich.
feeder drivers
Bradley, Michael S.A., Reed, Alan R., Berry, Rob and Holmes, C.P.M. (2008) Start-up and running forces on bulk solids feeders: experimental findings versus available models. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 450-457. ISBN 9788272062896
ferromagnetic effects
Bojarevics, V. and Pericleous, K. (2005) Nonlinear MHD stability of aluminium reduction cells. In: The 15th Riga and 6th PAMIRConference on Fundamental and Applied MHD. MHD-Online, Institute of Physics, University of Latvia, pp. 87-90.
file type
Bhatti, Rajinderpal, Chowdary, Boppana V. and Sahatoo, Divesh (2007) Some STL file generation issues in rapid prototyping. In: 5th Latin American and Caribbean Conference for Engineering and Technology Developing Entrepreneural Engineers for the Sustainable Growth of Latin American and Caribbean: Education, Innovation, Technology, and Practice. Latin American and Caribbean Consortium of Engineering Institutions, Florida. ISBN 098228960X
filling stress field
Bradley, Michael S.A., Reed, Alan R., Berry, Rob and Holmes, C.P.M. (2008) Start-up and running forces on bulk solids feeders: experimental findings versus available models. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 450-457. ISBN 9788272062896
finite element analysis
Yin, Chunyan (2006) Experimental and modelling analysis on the performance of anisotropic conductive films as used in electronics packaging. PhD thesis, University of Greenwich.
firepolishing
Mayur, Yaul, Bhatti, Rajinderpal and Lawrence, Stephen (2008) Evaluating the process of borosilicate glass capillaries used for fabrication of in-vitro fertilization (IVF) micro-pipettes. Biomedical Microdevices, 10 (1). pp. 123-128. ISSN 1387-2176 (doi:10.1007/s10544-007-9117-8)
flavoring powder
Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2009) Direct measurement of powder flavor adhesion onto crisp surface using a novel adhesion tester. Particulate Science and Technology, 27 (4). pp. 362-372. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:10.1080/02726350902994035)
flavouring powder
Ermis, Ertan, Farnish, Richard J., Berry, Rob and Bradley, Michael S.A. (2008) Direct measurement of powder flavour adhesion on to a food surface using a novel adhesion tester. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 803-810. ISBN 9788272062896
flip-chip assembly applications
Mallik, Sabuj, Ekere, Ndy, Marks, Antony, Seman, Anton and Durairaj, Rajkumar (2008) Modelling of the time-dependent flow behaviour of lead-free solder pastes used for flip-chip assembly applications. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 1219-1224. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684527)
flow of material
Aziza-Zafra, Karol (2010) A hat trick for coal handling. International Bulk Journal, 5. pp. 67-70. ISSN 0260-1087
flow patterns
Aziza-Zafra, Karol (2010) A hat trick for coal handling. International Bulk Journal, 5. pp. 67-70. ISSN 0260-1087
flow properties
Bradley, Michael S.A., Berry, Rob and Pillai, John (2007) Comparison between the angles of wall friction measured on an on-line wall friction tester and the Jenike wall friction tester. Powder Technology, 174 (1-2). pp. 64-70. ISSN 0032-5910 (doi:10.1016/j.powtec.2006.10.024)
flowability
Berry, R.J. and Bradley, M.S.A. (2010) Development of the Brookfield Powder Flow Tester. In: Bulk Solids Europe 2010 Conference and IMechE Symposium in New Frontiers in Bulk Materials Handling , 9-10 September 2010, Glasgow. (Submitted)
flowing stress field
Bradley, Michael S.A., Reed, Alan R., Berry, Rob and Holmes, C.P.M. (2008) Start-up and running forces on bulk solids feeders: experimental findings versus available models. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 450-457. ISBN 9788272062896
fluid flow
Yuan, Lang, Lee, Peter D., Djambazov, Georgi and Pericleous, Koulis A. (2010) Three-dimensional simulation of the influence of convection on dendritic solidification. In: Modeling of Casting, Welding, and Advanced Solidification Processes - XII (MCWASP XII). John Wiley & Sons, Inc. / The Minerals, Metals & Materials Society, Warrendale, PA, USA, pp. 451-458. ISBN 978-0-87339-742-1 (hbk)
focused ion beam
Narania, Sailesh, Eshahawi, Tarek, Gindy, Nabil, Tang, Ying Kit, Stoyanov, Stoyan, Ridout, Stephen and Bailey, Chris (2008) Risk mitigation framework for a robust design process. In: 2nd Electronics System-Integration Technology Conference, 2008. ESTC 2008. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1075-1080. ISBN 978-1-4244-2814-4 (Print), 978-1-4244-2813-7 (Online) (doi:10.1109/ESTC.2008.4684501)
foundry
Shehu, T. and Bhatti, R.S. (2012) The use of Yam flour (starch) as binder for sand mould production in Nigeria. World Applied Sciences Journal, 16 (6). pp. 858-862. ISSN 1818-495 (doi:wasj/wasj16(6)12/14.pdf)
freckle formation
Yuan, L., Lee, Peter D., Djambazov, Georgi and Pericleous, Koulis A. (2009) Multiscale modeling of the onset of freckle formation during vacuum arc remelting. In: International Symposium on Liquid Metal Processing and Casting - LMPC 2009. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 39-46. ISBN 978-0-87339-743-8
free surface
Djambazov, G., Pericleous, K., Lebon, B., Doh, Y., Jardy, A., Chapelle, P., Ghazal, G. and Gardin , P. (2012) Investigation of a possible route for oxygen transport via the metal droplets in top-blown steel converters. In: International Symposium on Liquid Metal Processing and Casting (LMPC). Wiley International, pp. 159-166. ISBN 978-1-1180-0202-5 (In Press)
freeze layer modelling
Campbell, Andrew Paul (2002) Modelling of freeze layer formation and refractory wear in direct smelting process. PhD thesis, University of Greenwich.
fresh foods
Manos, Basil and Manikas, Ioannis (2010) Traceability in the Greek fresh produce sector: drivers and constraints. British Food Journal, 112 (6). pp. 640-652. ISSN 0007-070X (doi:DOI 10.1108/00070701011052727)
gamma-TiAl alloys
Wang, H., Djambazov, G., Pericleous, K., Harding, R.A. and Wickins, M. (2012) Numerical modelling of tilt casting process for γ-TiAl alloys. International Journal of Cast Metals Research, 25 (2). pp. 65-74. ISSN 1364-0461 (Print), 1743-1336 (Online) (doi:10.1179/1743133611Y.0000000024)
global product development
Gao, James, Bradfield, Daniel J. and Soltan, Hossein (2007) A metaknowledge approach to facilitate knowledge sharing in the global product development process. Computer-Aided Design and Applications, 4 (1-4). pp. 519-528. ISSN 1686-4360 (doi:10.3722/cadaps.2007.519-528)
granulated clay
Deng, Tong, Bradley, Michael S.A., Berry, Rob and Kostuch, J. (2008) Caking strength of granulated clay under frozen conditions. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 604-609. ISBN 9788272062896
Graphical Evaluation and Review Technique (GERT)
Zhou, Li, Xie, Jiaping and Lin, Yong (2010) Forecasting returns in reverse logistics using GERT network theory. In: Responsive Manufacturing - Green Manufacturing (ICRM 2010). International Conference on Responsive Manufacturing - Green Manufacturing . IEEE Xplore Digital Library, Ningbo, pp. 349-356. (doi:10.1049/cp.2010.0456)
Greece
Manos, Basil and Manikas, Ioannis (2010) Traceability in the Greek fresh produce sector: drivers and constraints. British Food Journal, 112 (6). pp. 640-652. ISSN 0007-070X (doi:DOI 10.1108/00070701011052727)
heat transfer
Bojarevics, Valdis, Easter, S., Roy, A. and Pericleous, Koulis A. (2009) Levitated liquid droplets in AC and DC magnetic field. In: International Symposium on Liquid Metal Processing and Casting - LMPC 2009. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 319-326. ISBN 978-0-87339-743-8
Harding, R.A., Wickins, M., Keough, G., Roberts, R.J., Pericleous, Kyriacos and Bojarevics, Valdis (2005) The use of combined DC and AC fields to increase superheat in an induction skull melting furnace. In: LMPC 2005 : proceedings of the 2005 international symposium on liquid metal processing and casting : Santa Fe, New Mexico, USA, September 18-21, 2005. ASM International, Materials Park, Ohio, USA, pp. 201-210. ISBN 0871708272; 978-087170827-4
Wang, Hong (2008) Numerical modelling of the tilt casting processes of titanium alumindes. PhD thesis, University of Greenwich.
Hertzian indentation
Tian, Kun V., Nagy, Peter M., Chass, Gregory A., Fejerdy, Pal, Nicholson, John W., Csizmadia, Imre G. and Dobo´-Nagy, Csaba (2012) Qualitative assessment of microstructure and Hertzian indentation failure in biocompatible glass ionomer cements. Journal of Materials Science: Materials in Medicine, 23. pp. 677-685. ISSN 0957-4530 (Print), 1573-4838 (Online) (doi:10.1007/s10856-012-4553-2)
implants
Le, C.H., Okereke, M.I., Nguyen, V.H., Dao, V.D., Soe, S., Zlatov, N. and Le, T.H. (2011) Personalised medical product development: Methods, challenges and opportunities. Romanian Review Precision Mechanics, Optics and Mechatronics, 40. pp. 11-20. ISSN 1584-5982
improvement strategy methodology
Bhatti, Rajinderpal and Berkhauer-Smith, Samantha (2007) An integrated methodology of manufacturing business improvement strategies. In: Advances in production management systems. International Federation for Information Processing, 246 . Springer, Boston, USA, pp. 355-362. ISBN 9780387741567 (doi:10.1007/978-0-387-74157-4)
improving operations
Bhatti, Rajinderpal and Berkhauer-Smith, Samantha (2007) An integrated methodology of manufacturing business improvement strategies. In: Advances in production management systems. International Federation for Information Processing, 246 . Springer, Boston, USA, pp. 355-362. ISBN 9780387741567 (doi:10.1007/978-0-387-74157-4)
in-vitro fertilization
Mayur, Yaul, Bhatti, Rajinderpal and Lawrence, Stephen (2008) Evaluating the process of borosilicate glass capillaries used for fabrication of in-vitro fertilization (IVF) micro-pipettes. Biomedical Microdevices, 10 (1). pp. 123-128. ISSN 1387-2176 (doi:10.1007/s10544-007-9117-8)
induction skull melting
Harding, R.A., Wickins, M., Keough, G., Roberts, R.J., Pericleous, Kyriacos and Bojarevics, Valdis (2005) The use of combined DC and AC fields to increase superheat in an induction skull melting furnace. In: LMPC 2005 : proceedings of the 2005 international symposium on liquid metal processing and casting : Santa Fe, New Mexico, USA, September 18-21, 2005. ASM International, Materials Park, Ohio, USA, pp. 201-210. ISBN 0871708272; 978-087170827-4
induction skull melting (ISM)
Harding, R. A., Wickins, M, Bojarevics, Valdis and Pericleous, Kyriacos (2003) Obtaining data to validate a model of an induction skull melting furnace. In: Modeling of Casting, Welding and Advanced Solidification Processes. TMS, Destin, FL , pp. 741-748. ISBN 0873395557
industrial electrolysis cell
Bojarevics, V. and Pericleous, K. (2005) Nonlinear MHD stability of aluminium reduction cells. In: The 15th Riga and 6th PAMIRConference on Fundamental and Applied MHD. MHD-Online, Institute of Physics, University of Latvia, pp. 87-90.
information and knowledge Search
Gao, James and Jian, Amanda (2007) A multi-agent based knowledge search methodology for product development. In: Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.
information retrieval
Jian, Guo, Gao, James and Wang, Yinglin (2010) A multi-agent based knowledge search framework to support the product development process. International Journal of Computer Integrated Manufacturing, 23 (3). pp. 237-247. ISSN 0951-192X (doi:10.1080/09511920903529222)
information system
Folinas, Dimitris and Manikas, Ioannis (2010) Design and development of an e-platform for supporting liquid food supply chain monitoring and traceability. International Journal of Information Systems and Supply Chain Management (IJISSCM), 3 (3). pp. 29-49. ISSN 1935-5726 (print), 1935-5734 (on-line) (doi:10.4018/jisscm.2010070103)
information systems
Gao, James and Kuang, Li (2007) A framework to integrate manufacturing information systems. In: Digital enterprise technology perspectives and future challenges. Springer, New York, pp. 369-376. ISBN 9780387498638 (doi:10.1007/978-0-387-49864-5)
Saghiri, Soroosh (2007) Critical role of supply chain decoupling point in mass customization from its upstream and downstream information systems point of view. In: Mass Customization Information Systems in Business. IGI Global, London, UK, pp. 185-196. ISBN 978-1-59904-039-4 (doi:10.4018/978-1-59904-039-4)
information systems design
Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.
information systems integration
Gao, James and Kuang, Li (2007) A framework to integrate manufacturing information systems. In: Digital enterprise technology perspectives and future challenges. Springer, New York, pp. 369-376. ISBN 9780387498638 (doi:10.1007/978-0-387-49864-5)
innovation game process
Tian, Wei and Zhou, Li (2012) Comparison of supply chain consigning collaborative innovation modes. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 407-411. ISSN 1022-6680 (doi:10.4028/www.scientific.net/AMR.452-453.407)
innovation management
Baxter, David, Roy, Rajkumar, Doultsinou, Athanasia, Gao, James and Kalta, Mohamad (2009) A knowledge management framework to support product-service systems design. International Journal of Computer Integrated Manufacturing, 22 (12). pp. 1073-1088. ISSN 0951-192X (Print), 1362-3052 (Online) (doi:10.1080/09511920903207464)
integrated strategy application
Bhatti, Rajinderpal and Berkhauer-Smith, Samantha (2007) An integrated methodology of manufacturing business improvement strategies. In: Advances in production management systems. International Federation for Information Processing, 246 . Springer, Boston, USA, pp. 355-362. ISBN 9780387741567 (doi:10.1007/978-0-387-74157-4)
inter-relationships
Berkhauer-Smith, Samantha (2009) The integration of lean thinking and manufacturing business improvement methods within the aerospace supply chain. PhD thesis, University of Greenwich.
interface stability
Bojarevics, V. and Pericleous, K. (2005) Nonlinear MHD stability of aluminium reduction cells. In: The 15th Riga and 6th PAMIRConference on Fundamental and Applied MHD. MHD-Online, Institute of Physics, University of Latvia, pp. 87-90.
interface tracking
Wang, H., Djambazov, G., Pericleous, K., Harding, R.A. and Wickins, M. (2012) Numerical modelling of tilt casting process for γ-TiAl alloys. International Journal of Cast Metals Research, 25 (2). pp. 65-74. ISSN 1364-0461 (Print), 1743-1336 (Online) (doi:10.1179/1743133611Y.0000000024)
interfacial transition zone
Zhou, X.Z., Zheng, J.J. and Li, Chun-Qing (2006) An analytical method for prediction of the elastic modulus of concrete. Magazine of Concrete Research, 58 (10). pp. 665-673. ISSN 0024-9831 (doi:10.1680/macr.2006.58.10.665)
internet
Folinas, Dimitris and Manikas, Ioannis (2010) Design and development of an e-platform for supporting liquid food supply chain monitoring and traceability. International Journal of Information Systems and Supply Chain Management (IJISSCM), 3 (3). pp. 29-49. ISSN 1935-5726 (print), 1935-5734 (on-line) (doi:10.4018/jisscm.2010070103)
investment casting
Wang, Hong, Djambazov, Georgi, Pericleous, Koulis A., Harding, Richard A. and Wickins, Michael (2010) Modelling the tilt-casting process for the tranquil filling of titanium alloy turbine blades. In: Modeling of Casting, Welding, and Advanced Solidification Processes - XII (MCWASP XII). John Wiley and SOns, Inc. / The Minerals, Metals & Materials Society (TMS), Warrendale, PA, USA, pp. 53-60. ISBN 978-0-87339-742-1
Jenike shear cell
Berry, Rob, Bradley, Michael S.A., Farnish, Richard J. and Angulo Pinzon, O.A. (2008) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 344-350. ISBN 9788272062896
Bradley, Michael S.A., Berry, Rob, Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia. (Unpublished)
Jenike wall friction tester
Bradley, Michael S.A., Berry, Rob and Pillai, John (2007) Comparison between the angles of wall friction measured on an on-line wall friction tester and the Jenike wall friction tester. Powder Technology, 174 (1-2). pp. 64-70. ISSN 0032-5910 (doi:10.1016/j.powtec.2006.10.024)
K-Omega turbulence model
Bojarevics, Valdis, Roy, A., Easter, S. and Pericleous, Koulis A. (2009) Magnetic damping of levitated liquid droplets in AC and DC field. In: 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN 978-3-936104-65-3
KM
Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.
knowledge
Eadie, R. and Gao, James (2008) An industrial implementation of a methodology for the optimisation of product design tolerances. In: Advances in manufacturing technology XXII: the proceedings of the 6th International Conference on Manufacturing Research ICMR08, 9th-11th September 2008, London UK. Brunel University College, Brunel University, pp. 161-170. ISBN 9781902316604
knowledge management
Gao, James, Baxter, David, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2007) An engineering design knowledge reuse methodology using process modelling. Research in Engineering Design, 18 (1). pp. 37-48. ISSN 0934-9839 (doi:10.1007/s00163-007-0028-8)
Mountney, S.L., Gao, James and Wiseall, S. (2007) A knowledge system to support manufacturing knowledge during preliminary design. International Journal of Production Research, 45 (7). pp. 1521-1537. ISSN 0020-7543 (doi:10.1080/00207540600942300)
knowledge framework
Gao, James, Baxter, David and Roy, Rajkumar (2007) Specifying a design life cycle knowledge reuse framework part 1: manufacturing knowledge. In: Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.
knowledge management
Baxter, David, Roy, Rajkumar, Doultsinou, Athanasia, Gao, James and Kalta, Mohamad (2009) A knowledge management framework to support product-service systems design. International Journal of Computer Integrated Manufacturing, 22 (12). pp. 1073-1088. ISSN 0951-192X (Print), 1362-3052 (Online) (doi:10.1080/09511920903207464)
Gao, James and Jian, Amanda (2007) A multi-agent based knowledge search methodology for product development. In: Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.
Gao, James, Zhang, Pengcheng, Baxter, David and Kalta, Mo (2007) Developing a design process model for the reuse of knowledge. In: Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.
Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.
knowledge representation
Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2008) Knowledge reuse in manufacturability analysis. Robotics and Computer Integrated Manufacturing, 24 (4). pp. 508-513. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.003)
Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2009) Manufacturing knowledge verification in design support systems. International Journal of Production Research, 47 (12). pp. 3179-3204. ISSN 0020-7543 (Print), 1366–588X (Online) (doi:10.1080/00207540701802452)
Zhu, Haihua, Gao, James, Li, Dongbo and Tang, Dunbing (2012) A Web-based Product Service System for aerospace maintenance, repair and overhaul services. Computers in Industry, 63 (4). pp. 338-348. ISSN 0166-3615 (doi:10.1016/j.compind.2012.02.016)
knowledge reuse
Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2008) Knowledge reuse in manufacturability analysis. Robotics and Computer Integrated Manufacturing, 24 (4). pp. 508-513. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.003)
Gao, James, Baxter, David and Roy, Rajkumar (2007) Specifying a design life cycle knowledge reuse framework part 1: manufacturing knowledge. In: Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.
knowledge search methodology
Jian, Guo, Gao, James and Wang, Yinglin (2010) A multi-agent based knowledge search framework to support the product development process. International Journal of Computer Integrated Manufacturing, 23 (3). pp. 237-247. ISSN 0951-192X (doi:10.1080/09511920903529222)
Jian, Guo (2011) Knowledge search for new product development: a multi-agent based methodology. PhD thesis, University of Greenwich.
knowledge sharing
Gao, James and Bradfield, Daniel J. (2007) A methodology to facilitate knowledge sharing in the new product development process. International Journal of Production Research, 45 (7). pp. 1489-1504. ISSN 0020-7543 (doi:10.1080/00207540600942227)
lean environment
Berkhauer-Smith, Samantha (2009) The integration of lean thinking and manufacturing business improvement methods within the aerospace supply chain. PhD thesis, University of Greenwich.
lean manufacture
Berkhauer-Smith, Samantha (2009) The integration of lean thinking and manufacturing business improvement methods within the aerospace supply chain. PhD thesis, University of Greenwich.
linear friction law
Bojarevics, V. and Pericleous, K. (2005) Nonlinear MHD stability of aluminium reduction cells. In: The 15th Riga and 6th PAMIRConference on Fundamental and Applied MHD. MHD-Online, Institute of Physics, University of Latvia, pp. 87-90.
liquid metal flow
Djambazov, G., Pericleous, K., Lebon, B., Doh, Y., Jardy, A., Chapelle, P., Ghazal, G. and Gardin , P. (2012) Investigation of a possible route for oxygen transport via the metal droplets in top-blown steel converters. In: International Symposium on Liquid Metal Processing and Casting (LMPC). Wiley International, pp. 159-166. ISBN 978-1-1180-0202-5 (In Press)
liquidity shocks
Gueded, Jose and Mateus, Cesario (2009) Trade credit linkages along the supply chain: evidence for the Italian textile sector. In: European Financial Management Association 2009 Annual Meetings, 24-27 Jun 2009, Milan, Italy.
literature review
Berkhauer-Smith, Samantha (2009) The integration of lean thinking and manufacturing business improvement methods within the aerospace supply chain. PhD thesis, University of Greenwich.
Gao, James, Baxter, David and Roy, Rajkumar (2009) Managing knowledge within the manufacturing enterprise: an overview. International Journal of Manufacturing Technology and Management (IJMTM), 18 (2). pp. 183-209. ISSN 1368-2148 (doi:10.1504/IJMTM.2009.026193)
machine learning
Saeed, Soran (2006) An investigation into establishing a generalised approach for defining similarity metrics between 3D shapes for case-based reasoning (CBR). PhD thesis, University of Greenwich.
magnetic fields
Pericleous, Koulis A., Djambazov, Georgi, Bojarevics, Valdis and Ward, R.M. (2009) A unified 3D model of the VAR process. In: International Symposium on Liquid Metal Processing and Casting - LMPC 2009. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 21-28. ISBN 978-0-87339-743-8
magnetic levitation
Bojarevics, Valdis, Easter, S., Roy, A. and Pericleous, Koulis A. (2009) Levitated liquid droplets in AC and DC magnetic field. In: International Symposium on Liquid Metal Processing and Casting - LMPC 2009. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 319-326. ISBN 978-0-87339-743-8
Bojarevics, Valdis, Roy, A., Easter, S. and Pericleous, Koulis A. (2009) Magnetic damping of levitated liquid droplets in AC and DC field. In: 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN 978-3-936104-65-3
Easter, S., Bojarevics, Valdis and Pericleous, Koulis A. (2009) Determining surface tension using DC magnetic levitation. In: 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN 978-3-936104-65-3
magnetohydrodynamics
Kao, A., Pericleous, K., Patel, M.K. and Voller, V. (2009) Effects of magnetic fields on crystal growth. International Journal of Cast Metals Research, 22 (1-4). pp. 147-150. ISSN 1364-0461 (Print), 1743-1336 (Online) (doi:10.1179/136404609X367551)
maintenance
Jones, Keith and Sharp, Mark (2007) A new performance-based process model for built asset maintenance. Facilities, 25 (13/14). pp. 525-535. ISSN 0263-2772 (doi:10.1108/02632770710822616)
Li, Chun-Qing and Shao, L. (2007) Reliability based asset management strategy for concrete infrastructure. International Journal of Materials and Structural Reliability, 5 (1). pp. 13-28.
Zhu, Haihua, Gao, James, Li, Dongbo and Tang, Dunbing (2012) A Web-based Product Service System for aerospace maintenance, repair and overhaul services. Computers in Industry, 63 (4). pp. 338-348. ISSN 0166-3615 (doi:10.1016/j.compind.2012.02.016)
manufacturer
Tian, Wei and Zhou, Li (2012) Comparison of supply chain consigning collaborative innovation modes. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 407-411. ISSN 1022-6680 (doi:10.4028/www.scientific.net/AMR.452-453.407)
manufactures
Angulo Pinzon, Oscar Andres (2012) Modelling of dosator filling and discharge. PhD thesis, University of Greenwich.
Yin, Chunyan (2006) Experimental and modelling analysis on the performance of anisotropic conductive films as used in electronics packaging. PhD thesis, University of Greenwich.
manufacturing
Berkhauer-Smith, Samantha (2009) The integration of lean thinking and manufacturing business improvement methods within the aerospace supply chain. PhD thesis, University of Greenwich.
Gao, James and Baxter, David (2008) Editorial for the special issue of RCIM for ICMR2005: Third International Conference on Manufacturing Research, Cranfield University, September 6th–9th 2005, Cranfield, UK. Robotics and Computer-Integrated Manufacturing, 24 (4). pp. 499-500. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.001)
manufacturing and cost evaluation
Gao, James and Sharma , R. (2007) A knowledge-based manufacturing and cost evaluation system for product design/re-design. The International Journal of Advanced Manufacturing Technology, 33 (9-10). pp. 856-865. ISSN 0268-3768 (doi:10.1007/s00170-006-0530-6)
manufacturing business improvements
Bhatti, Rajinderpal and Berkhauer-Smith, Samantha (2007) Integrating both technical and cultural aspects of process improvement. In: 5th International Conference on Manufacturing Research (ICMR 2007) , 11- 13 September 2007, De Montfort University Leicester. (Unpublished)
manufacturing knowledge
Gao, James, Baxter, David and Roy, Rajkumar (2009) Managing knowledge within the manufacturing enterprise: an overview. International Journal of Manufacturing Technology and Management (IJMTM), 18 (2). pp. 183-209. ISSN 1368-2148 (doi:10.1504/IJMTM.2009.026193)
Gao, James, Baxter, David and Roy, Rajkumar (2007) Specifying a design life cycle knowledge reuse framework part 1: manufacturing knowledge. In: Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.
Mountney, S.L., Gao, James and Wiseall, S. (2007) A knowledge system to support manufacturing knowledge during preliminary design. International Journal of Production Research, 45 (7). pp. 1521-1537. ISSN 0020-7543 (doi:10.1080/00207540600942300)
manufacturing method
Shimasaki, S., Imanishi, K., Taniguchi, S. and Bojarevics, Valdis (2009) Manufacturing of uniformly-sized silicon particles for solar cell from molten metal jet by electromagnetic pinch force. In: 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN Forschungszentrum Dresden-Rossendorf
manufacturing operations
Bhatti, Rajinderpal and Berkhauer-Smith, Samantha (2007) An integrated methodology of manufacturing business improvement strategies. In: Advances in production management systems. International Federation for Information Processing, 246 . Springer, Boston, USA, pp. 355-362. ISBN 9780387741567 (doi:10.1007/978-0-387-74157-4)
manufacturing process
Narania, Sailesh, Eshahawi, Tarek, Gindy, Nabil, Tang, Ying Kit, Stoyanov, Stoyan, Ridout, Stephen and Bailey, Chris (2008) Risk mitigation framework for a robust design process. In: 2nd Electronics System-Integration Technology Conference, 2008. ESTC 2008. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1075-1080. ISBN 978-1-4244-2814-4 (Print), 978-1-4244-2813-7 (Online) (doi:10.1109/ESTC.2008.4684501)
mass customization
Saghiri, Soroosh (2007) Critical role of supply chain decoupling point in mass customization from its upstream and downstream information systems point of view. In: Mass Customization Information Systems in Business. IGI Global, London, UK, pp. 185-196. ISBN 978-1-59904-039-4 (doi:10.4018/978-1-59904-039-4)
material physical properties
Easter, S., Bojarevics, Valdis and Pericleous, Koulis A. (2009) Determining surface tension using DC magnetic levitation. In: 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN 978-3-936104-65-3
material properties
Bojarevics, Valdis, Easter, S., Roy, A. and Pericleous, Koulis A. (2009) Levitated liquid droplets in AC and DC magnetic field. In: International Symposium on Liquid Metal Processing and Casting - LMPC 2009. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 319-326. ISBN 978-0-87339-743-8
mathematical modelling
Dupuis, Marc, Bojarevics, Valdis and Richard, Daniel (2008) Impact of the vertical potshell deformation on the MHD cell stability behavior of a 500 kA aluminium electrolysis cell. In: Light Metals 2008. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 409-412. ISBN 978-0-87339-710-0
Yin, Chunyan (2006) Experimental and modelling analysis on the performance of anisotropic conductive films as used in electronics packaging. PhD thesis, University of Greenwich.
MCWASP
Harding, R. A., Wickins, M, Bojarevics, Valdis and Pericleous, Kyriacos (2003) Obtaining data to validate a model of an induction skull melting furnace. In: Modeling of Casting, Welding and Advanced Solidification Processes. TMS, Destin, FL , pp. 741-748. ISBN 0873395557
MDH
Bojarevics, Valdis, Roy, A., Easter, S. and Pericleous, Koulis A. (2009) Magnetic damping of levitated liquid droplets in AC and DC field. In: 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN 978-3-936104-65-3
measured flow properties
Berry, R.J. and Bradley, M.S.A. (2010) Development of the Brookfield Powder Flow Tester. In: Bulk Solids Europe 2010 Conference and IMechE Symposium in New Frontiers in Bulk Materials Handling , 9-10 September 2010, Glasgow. (Submitted)
medical product development
Le, C.H., Okereke, M.I., Nguyen, V.H., Dao, V.D., Soe, S., Zlatov, N. and Le, T.H. (2011) Personalised medical product development: Methods, challenges and opportunities. Romanian Review Precision Mechanics, Optics and Mechatronics, 40. pp. 11-20. ISSN 1584-5982
melting furnaces
Harding, R. A., Wickins, M, Bojarevics, Valdis and Pericleous, Kyriacos (2003) Obtaining data to validate a model of an induction skull melting furnace. In: Modeling of Casting, Welding and Advanced Solidification Processes. TMS, Destin, FL , pp. 741-748. ISBN 0873395557
Harding, R.A., Wickins, M., Keough, G., Roberts, R.J., Pericleous, Kyriacos and Bojarevics, Valdis (2005) The use of combined DC and AC fields to increase superheat in an induction skull melting furnace. In: LMPC 2005 : proceedings of the 2005 international symposium on liquid metal processing and casting : Santa Fe, New Mexico, USA, September 18-21, 2005. ASM International, Materials Park, Ohio, USA, pp. 201-210. ISBN 0871708272; 978-087170827-4
melting/solidification
Pericleous, Koulis A., Djambazov, Georgi, Bojarevics, Valdis and Ward, R.M. (2009) A unified 3D model of the VAR process. In: International Symposium on Liquid Metal Processing and Casting - LMPC 2009. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 21-28. ISBN 978-0-87339-743-8
metaknowledge
Gao, James, Bradfield, Daniel J. and Soltan, Hossein (2007) A metaknowledge approach to facilitate knowledge sharing in the global product development process. Computer-Aided Design and Applications, 4 (1-4). pp. 519-528. ISSN 1686-4360 (doi:10.3722/cadaps.2007.519-528)
metaknowledge ontology
Gao, James, Bradfield, Daniel J. and Soltan, Hossein (2007) Development of a tool to support the dissemination of information about knowledge in multilingual product development teams. In: Proceedings of the International conference on product lifecycle management: assessing the industrial relevance. Inderscience Enterprises Ltd, Genva Aeroport, pp. 261-270. ISBN 9780907776321
metrics
Saeed, Soran (2006) An investigation into establishing a generalised approach for defining similarity metrics between 3D shapes for case-based reasoning (CBR). PhD thesis, University of Greenwich.
MHD
Kao, Andrew, Pericleous, Koulis A., Patel, Mayur K. and Voller, Vaughan R. (2010) Thermoelectric effects on alloy solidification microstructure. In: Modeling of Casting, Welding, and Advanced Solidification Processes. John Wiley & Sons, Inc. / The Minerals, Metals & Materials Society, Warrendale, PA, USA, pp. 521-528. ISBN 978-0-87339-742-1 (hbk)
MHD flow
Bojarevics, Valdis, Easter, S., Roy, A. and Pericleous, Koulis A. (2009) Levitated liquid droplets in AC and DC magnetic field. In: International Symposium on Liquid Metal Processing and Casting - LMPC 2009. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 319-326. ISBN 978-0-87339-743-8
Pericleous, Koulis A., Djambazov, Georgi, Bojarevics, Valdis and Ward, R.M. (2009) A unified 3D model of the VAR process. In: International Symposium on Liquid Metal Processing and Casting - LMPC 2009. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 21-28. ISBN 978-0-87339-743-8
MHD instabilities
Dupuis, Marc, Bojarevics, Valdis and Richard, Daniel (2008) Impact of the vertical potshell deformation on the MHD cell stability behavior of a 500 kA aluminium electrolysis cell. In: Light Metals 2008. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 409-412. ISBN 978-0-87339-710-0
micro manufacturing
Tang, Ying Kit (2012) A risk analysis methodology for micro/nano manufacturing. PhD thesis, University of Greenwich.
micro-pipettes
Mayur, Yaul, Bhatti, Rajinderpal and Lawrence, Stephen (2008) Evaluating the process of borosilicate glass capillaries used for fabrication of in-vitro fertilization (IVF) micro-pipettes. Biomedical Microdevices, 10 (1). pp. 123-128. ISSN 1387-2176 (doi:10.1007/s10544-007-9117-8)
microstructure
Durairaj, Rajkumar, Mallik, Sabuj, Seman, Anton, Marks, Antony and Ekere, Ndy (2008) Investigation of wall-slip effect on paste release characteristic in flip-chip stencil printing process. In: 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1328-1333. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763615)
Mallik, Sabuj, Schmidt, M., Bauer, R. and Ekere, Ndy (2008) Influence of solder paste components on rheological behaviour. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, USA, pp. 1135-1140. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684512)
Marks, A.E., Mallik, S., Ekere, N.N. and Seman, A. (2008) Effect of temperature on slumping behaviour of lead-free solder paste and its rheological simulation. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 829-832. ISBN 97814244-28137 (Print), 978-1-4244-2814-4 (Electronic) (doi:10.1109/ESTC.2008.4684459)
Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) Development of an in-situ, non-destructive ultrasonic monitoring technique for solder pastes. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 209-214. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684351)
Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) In-situ non-destructive ultrasonic rheology technique for monitoring different lead-free solder pastes for surface mount applications. In: 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1448-1454. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763635)
modeling
Cross, M., McBride, D., Croft, T.N., Williams, A.J., Pericleous, K. and Lawrence, J.A. (2006) Computational modeling of mold filling and related free-surface flows in shape casting: an overview of the challenges involved. Metallurgical and Materials Transactions B, 37 (6). pp. 879-885. ISSN 1073-5615 (Print), 1543-1916 (Online) (doi:10.1007/BF02735009)
Harding, R. A., Wickins, M, Bojarevics, Valdis and Pericleous, Kyriacos (2003) Obtaining data to validate a model of an induction skull melting furnace. In: Modeling of Casting, Welding and Advanced Solidification Processes. TMS, Destin, FL , pp. 741-748. ISBN 0873395557
Harding, R.A., Wickins, M., Keough, G., Roberts, R.J., Pericleous, Kyriacos and Bojarevics, Valdis (2005) The use of combined DC and AC fields to increase superheat in an induction skull melting furnace. In: LMPC 2005 : proceedings of the 2005 international symposium on liquid metal processing and casting : Santa Fe, New Mexico, USA, September 18-21, 2005. ASM International, Materials Park, Ohio, USA, pp. 201-210. ISBN 0871708272; 978-087170827-4
modelling
Fei, Genyuan (2011) A methodology for engineering design change analysis using system modelling and knowledge management technologies. PhD thesis, University of Greenwich.
modelling analysis
Yin, Chunyan (2006) Experimental and modelling analysis on the performance of anisotropic conductive films as used in electronics packaging. PhD thesis, University of Greenwich.
mortar
Zhou, X.Z., Zheng, J.J. and Li, Chun-Qing (2006) An analytical method for prediction of the elastic modulus of concrete. Magazine of Concrete Research, 58 (10). pp. 665-673. ISSN 0024-9831 (doi:10.1680/macr.2006.58.10.665)
mould filling
Cross, M., McBride, D., Croft, T.N., Williams, A.J., Pericleous, K. and Lawrence, J.A. (2006) Computational modeling of mold filling and related free-surface flows in shape casting: an overview of the challenges involved. Metallurgical and Materials Transactions B, 37 (6). pp. 879-885. ISSN 1073-5615 (Print), 1543-1916 (Online) (doi:10.1007/BF02735009)
Lawrence, James Andrew (2004) The prediction of bubble defects in castings. PhD thesis, University of Greenwich.
moulding sand
Shehu, T. and Bhatti, R.S. (2012) The use of Yam flour (starch) as binder for sand mould production in Nigeria. World Applied Sciences Journal, 16 (6). pp. 858-862. ISSN 1818-495 (doi:wasj/wasj16(6)12/14.pdf)
multi-agent
Gao, James and Jian, Amanda (2007) A multi-agent based knowledge search methodology for product development. In: Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.
multilingual
Gao, James and Bradfield, Daniel J. (2007) A methodology to facilitate knowledge sharing in the new product development process. International Journal of Production Research, 45 (7). pp. 1489-1504. ISSN 0020-7543 (doi:10.1080/00207540600942227)
Gao, James, Bradfield, Daniel J. and Soltan, Hossein (2007) Development of a tool to support the dissemination of information about knowledge in multilingual product development teams. In: Proceedings of the International conference on product lifecycle management: assessing the industrial relevance. Inderscience Enterprises Ltd, Genva Aeroport, pp. 261-270. ISBN 9780907776321
multiscale modeling
Yuan, L., Lee, Peter D., Djambazov, Georgi and Pericleous, Koulis A. (2009) Multiscale modeling of the onset of freckle formation during vacuum arc remelting. In: International Symposium on Liquid Metal Processing and Casting - LMPC 2009. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 39-46. ISBN 978-0-87339-743-8
mutually supported elements
Rizzuto, J.P. and Larsen, O.Popovic (2010) Connection systems in reciprocal frames and mutually supported elements space structure networks. International Journal of Space Structures, 25 (4). pp. 243-256. ISSN 0266-3511 (Submitted) (doi:10.1260/0266-3511.25.4.243)
nano manufacturing
Tang, Ying Kit (2012) A risk analysis methodology for micro/nano manufacturing. PhD thesis, University of Greenwich.
new product design
Gao, James, Fei, Genyuan and Tang, X.Q. (2009) A TRIZ based methodology for the analysis of the coupling problems in complex engineering design. In: Proceedings of the 19th CIRP Design Conference – Competitive Design, 30-31 March 2009. Cranfield University Press, Cranfield University, pp. 285-292. ISBN 9780955743641
new product development
Gao, James and Bradfield, Daniel J. (2007) A methodology to facilitate knowledge sharing in the new product development process. International Journal of Production Research, 45 (7). pp. 1489-1504. ISSN 0020-7543 (doi:10.1080/00207540600942227)
Gao, James and Jian, Amanda (2007) A multi-agent based knowledge search methodology for product development. In: Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.
Jian, Guo (2011) Knowledge search for new product development: a multi-agent based methodology. PhD thesis, University of Greenwich.
Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.
new product introduction
Gao, James, Baxter, David, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2007) An engineering design knowledge reuse methodology using process modelling. Research in Engineering Design, 18 (1). pp. 37-48. ISSN 0934-9839 (doi:10.1007/s00163-007-0028-8)
Mountney, S.L., Gao, James and Wiseall, S. (2007) A knowledge system to support manufacturing knowledge during preliminary design. International Journal of Production Research, 45 (7). pp. 1521-1537. ISSN 0020-7543 (doi:10.1080/00207540600942300)
NPD
Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.
numerical diffusion
Wang, Hong (2008) Numerical modelling of the tilt casting processes of titanium alumindes. PhD thesis, University of Greenwich.
numerical modelling
Wang, Hong (2008) Numerical modelling of the tilt casting processes of titanium alumindes. PhD thesis, University of Greenwich.
Yuan, Lang, Lee, Peter D., Djambazov, Georgi and Pericleous, Koulis A. (2010) Three-dimensional simulation of the influence of convection on dendritic solidification. In: Modeling of Casting, Welding, and Advanced Solidification Processes - XII (MCWASP XII). John Wiley & Sons, Inc. / The Minerals, Metals & Materials Society, Warrendale, PA, USA, pp. 451-458. ISBN 978-0-87339-742-1 (hbk)
numerical simulation
Djambazov, G., Pericleous, K., Lebon, B., Doh, Y., Jardy, A., Chapelle, P., Ghazal, G. and Gardin , P. (2012) Investigation of a possible route for oxygen transport via the metal droplets in top-blown steel converters. In: International Symposium on Liquid Metal Processing and Casting (LMPC). Wiley International, pp. 159-166. ISBN 978-1-1180-0202-5 (In Press)
numerical simulation model
Shimasaki, S., Imanishi, K., Taniguchi, S. and Bojarevics, Valdis (2009) Manufacturing of uniformly-sized silicon particles for solar cell from molten metal jet by electromagnetic pinch force. In: 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN Forschungszentrum Dresden-Rossendorf
ontology
Aziz, Hayder, Li, Zhengxi and Gao, James (2008) Engineering design knowledge management in de-centralised virtual enterprises. Computer Aided Design and Applications, 5 (6). pp. 787-800. ISSN 1686-4360 (doi:10.3722/cadaps.2008.787-800)
Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2008) Knowledge reuse in manufacturability analysis. Robotics and Computer Integrated Manufacturing, 24 (4). pp. 508-513. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.003)
Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2009) Manufacturing knowledge verification in design support systems. International Journal of Production Research, 47 (12). pp. 3179-3204. ISSN 0020-7543 (Print), 1366–588X (Online) (doi:10.1080/00207540701802452)
Gao, James, Baxter, David and Roy, Rajkumar (2007) Specifying a design life cycle knowledge reuse framework part 1: manufacturing knowledge. In: Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.
Gao, James and Bradfield, Daniel J. (2007) A methodology to facilitate knowledge sharing in the new product development process. International Journal of Production Research, 45 (7). pp. 1489-1504. ISSN 0020-7543 (doi:10.1080/00207540600942227)
Gao, James, Bradfield, Daniel J. and Soltan, Hossein (2007) A metaknowledge approach to facilitate knowledge sharing in the global product development process. Computer-Aided Design and Applications, 4 (1-4). pp. 519-528. ISSN 1686-4360 (doi:10.3722/cadaps.2007.519-528)
optimisation
Eadie, R. and Gao, James (2008) An industrial implementation of a methodology for the optimisation of product design tolerances. In: Advances in manufacturing technology XXII: the proceedings of the 6th International Conference on Manufacturing Research ICMR08, 9th-11th September 2008, London UK. Brunel University College, Brunel University, pp. 161-170. ISBN 9781902316604
optimization
Li, Chun-Qing and Shao, L. (2007) Reliability based asset management strategy for concrete infrastructure. International Journal of Materials and Structural Reliability, 5 (1). pp. 13-28.
orthotics
Le, C.H., Okereke, M.I., Nguyen, V.H., Dao, V.D., Soe, S., Zlatov, N. and Le, T.H. (2011) Personalised medical product development: Methods, challenges and opportunities. Romanian Review Precision Mechanics, Optics and Mechatronics, 40. pp. 11-20. ISSN 1584-5982
panel data
Gueded, Jose and Mateus, Cesario (2009) Trade credit linkages along the supply chain: evidence for the Italian textile sector. In: European Financial Management Association 2009 Annual Meetings, 24-27 Jun 2009, Milan, Italy.
particulate clay
Deng, Tong, Bradley, Michael S.A., Berry, Rob and Kostuch, J. (2008) Caking strength of granulated clay under frozen conditions. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 604-609. ISBN 9788272062896
peer-to-peer
Aziz, Hayder, Li, Zhengxi and Gao, James (2008) Engineering design knowledge management in de-centralised virtual enterprises. Computer Aided Design and Applications, 5 (6). pp. 787-800. ISSN 1686-4360 (doi:10.3722/cadaps.2008.787-800)
performance measurement
Jones, Keith and Sharp, Mark (2007) A new performance-based process model for built asset maintenance. Facilities, 25 (13/14). pp. 525-535. ISSN 0263-2772 (doi:10.1108/02632770710822616)
periodic laser heating
Roy, A.A., Easter, S., Bojarevics, V. and Pericleous, K. (2012) Use of a static magnetic field in measuring the thermal conductivity of a levitated molten droplet. Journal of Algorithms and Computational Technology, 6 (1). pp. 153-172. ISSN 1748-3018 (Print) (doi:10.1260/1748-3018.6.1.153)
personalised health care
Le, C.H., Okereke, M.I., Nguyen, V.H., Dao, V.D., Soe, S., Zlatov, N. and Le, T.H. (2011) Personalised medical product development: Methods, challenges and opportunities. Romanian Review Precision Mechanics, Optics and Mechatronics, 40. pp. 11-20. ISSN 1584-5982
phase change
Harding, R.A., Wickins, M., Keough, G., Roberts, R.J., Pericleous, Kyriacos and Bojarevics, Valdis (2005) The use of combined DC and AC fields to increase superheat in an induction skull melting furnace. In: LMPC 2005 : proceedings of the 2005 international symposium on liquid metal processing and casting : Santa Fe, New Mexico, USA, September 18-21, 2005. ASM International, Materials Park, Ohio, USA, pp. 201-210. ISBN 0871708272; 978-087170827-4
photovoltaic (PV) power systems
Shimasaki, S., Imanishi, K., Taniguchi, S. and Bojarevics, Valdis (2009) Manufacturing of uniformly-sized silicon particles for solar cell from molten metal jet by electromagnetic pinch force. In: 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN Forschungszentrum Dresden-Rossendorf
PLM
Aziz, Hayder, Li, Zhengxi and Gao, James (2008) Engineering design knowledge management in de-centralised virtual enterprises. Computer Aided Design and Applications, 5 (6). pp. 787-800. ISSN 1686-4360 (doi:10.3722/cadaps.2008.787-800)
Baxter, David, Doultsinou, Athanasia, Roy, Rajkumar and Gao, James (2010) A life cycle model for product-service systems design. In: 5th International Conference on Digital Enterprise Technology. Publibook, Paris, France, pp. 441-456.
powder characterisation
Berry, Rob, Bradley, Michael S.A., Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction test procedure, suitable for equipment design and powder characterisation. In: ICBMH Conference: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, Australia. (Unpublished)
powders
Angulo Pinzon, O.A., Bradley, Michael S.A., Berry, Rob and Farnish, Richard J. (2008) Modelling dosator filling and discharge of powder. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 586-591. ISBN 9788272062896
process improvement
Bhatti, Rajinderpal and Berkhauer-Smith, Samantha (2007) An integrated methodology of manufacturing business improvement strategies. In: Advances in production management systems. International Federation for Information Processing, 246 . Springer, Boston, USA, pp. 355-362. ISBN 9780387741567 (doi:10.1007/978-0-387-74157-4)
process improvements
Bhatti, Rajinderpal and Berkhauer-Smith, Samantha (2007) Integrating both technical and cultural aspects of process improvement. In: 5th International Conference on Manufacturing Research (ICMR 2007) , 11- 13 September 2007, De Montfort University Leicester. (Unpublished)
process parameters
Wang, H., Djambazov, G., Pericleous, K., Harding, R.A. and Wickins, M. (2012) Numerical modelling of tilt casting process for γ-TiAl alloys. International Journal of Cast Metals Research, 25 (2). pp. 65-74. ISSN 1364-0461 (Print), 1743-1336 (Online) (doi:10.1179/1743133611Y.0000000024)
process simulation
Wang, Hong, Djambazov, Georgi, Pericleous, Koulis A., Harding, Richard A. and Wickins, Michael (2010) Modelling the tilt-casting process for the tranquil filling of titanium alloy turbine blades. In: Modeling of Casting, Welding, and Advanced Solidification Processes - XII (MCWASP XII). John Wiley and SOns, Inc. / The Minerals, Metals & Materials Society (TMS), Warrendale, PA, USA, pp. 53-60. ISBN 978-0-87339-742-1
product design
Tang, Ying Kit (2012) A risk analysis methodology for micro/nano manufacturing. PhD thesis, University of Greenwich.
product design process
Fei, Genyuan (2011) A methodology for engineering design change analysis using system modelling and knowledge management technologies. PhD thesis, University of Greenwich.
product development
Baxter, David, Roy, Rajkumar, Doultsinou, Athanasia, Gao, James and Kalta, Mohamad (2009) A knowledge management framework to support product-service systems design. International Journal of Computer Integrated Manufacturing, 22 (12). pp. 1073-1088. ISSN 0951-192X (Print), 1362-3052 (Online) (doi:10.1080/09511920903207464)
Gao, James and Baxter, David (2007) Enabling technologies and frameworks for new product development: a selection of papers from ICMR2005. International Journal of Production Research, 45 (7). pp. 1485-1487. ISSN 0020-7543 (doi:10.1080/00207540600942201)
Gao, James, Bradfield, Daniel J. and Soltan, Hossein (2007) Development of a tool to support the dissemination of information about knowledge in multilingual product development teams. In: Proceedings of the International conference on product lifecycle management: assessing the industrial relevance. Inderscience Enterprises Ltd, Genva Aeroport, pp. 261-270. ISBN 9780907776321
product development process
Jian, Guo, Gao, James and Wang, Yinglin (2010) A multi-agent based knowledge search framework to support the product development process. International Journal of Computer Integrated Manufacturing, 23 (3). pp. 237-247. ISSN 0951-192X (doi:10.1080/09511920903529222)
Jian, Guo (2011) Knowledge search for new product development: a multi-agent based methodology. PhD thesis, University of Greenwich.
product lifecycle management
Baxter, David, Doultsinou, Athanasia, Roy, Rajkumar and Gao, James (2010) A life cycle model for product-service systems design. In: 5th International Conference on Digital Enterprise Technology. Publibook, Paris, France, pp. 441-456.
Gao, James, Baxter, David, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2007) An engineering design knowledge reuse methodology using process modelling. Research in Engineering Design, 18 (1). pp. 37-48. ISSN 0934-9839 (doi:10.1007/s00163-007-0028-8)
product service system
Zhu, Haihua, Gao, James, Li, Dongbo and Tang, Dunbing (2012) A Web-based Product Service System for aerospace maintenance, repair and overhaul services. Computers in Industry, 63 (4). pp. 338-348. ISSN 0166-3615 (doi:10.1016/j.compind.2012.02.016)
product-service systems
Baxter, David, Doultsinou, Athanasia, Roy, Rajkumar and Gao, James (2010) A life cycle model for product-service systems design. In: 5th International Conference on Digital Enterprise Technology. Publibook, Paris, France, pp. 441-456.
Doultsinou, Athanasia, Roy, Rajkumar, Baxter, David, Gao, James and Mann, Andy (2009) Developing a service knowledge reuse framework for engineering design. Journal of Engineering Design, 20 (4). pp. 389-411. ISSN 0954-4828 (Print), 1466-1837 (Online) (doi:10.1080/09544820903149354)
production processes
Jones, Keith and Sharp, Mark (2007) A new performance-based process model for built asset maintenance. Facilities, 25 (13/14). pp. 525-535. ISSN 0263-2772 (doi:10.1108/02632770710822616)
Sharp, Mark (2008) Expectations of inefficiency in the built asset maintenance process. PhD thesis, University of Greenwich.
project success rate
Bhatti, Rajinderpal and Berkhauer-Smith, Samantha (2007) Integrating both technical and cultural aspects of process improvement. In: 5th International Conference on Manufacturing Research (ICMR 2007) , 11- 13 September 2007, De Montfort University Leicester. (Unpublished)
prototypes
Tang, Ying Kit (2012) A risk analysis methodology for micro/nano manufacturing. PhD thesis, University of Greenwich.
PSS
Baxter, David, Doultsinou, Athanasia, Roy, Rajkumar and Gao, James (2010) A life cycle model for product-service systems design. In: 5th International Conference on Digital Enterprise Technology. Publibook, Paris, France, pp. 441-456.
rapid prototyping
Bhatti, Rajinderpal, Chowdary, Boppana V. and Sahatoo, Divesh (2007) Some STL file generation issues in rapid prototyping. In: 5th Latin American and Caribbean Conference for Engineering and Technology Developing Entrepreneural Engineers for the Sustainable Growth of Latin American and Caribbean: Education, Innovation, Technology, and Practice. Latin American and Caribbean Consortium of Engineering Institutions, Florida. ISBN 098228960X
Sahatoo, Divesh, Chowdary, Boppana V., Ali, Fahraz F. and Bhatti, Rajinderpal (2008) Slicing issues in CAD translation to STL in rapid prototyping. In: Proceedings of The 2008 IAJC-IJME International Conference. International Association of Journals and Conferences/International Journal of Modern Engineering, California State University, Northridge. ISBN 9781606433799
Rayleigh number
Yuan, L., Lee, Peter D., Djambazov, Georgi and Pericleous, Koulis A. (2009) Multiscale modeling of the onset of freckle formation during vacuum arc remelting. In: International Symposium on Liquid Metal Processing and Casting - LMPC 2009. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 39-46. ISBN 978-0-87339-743-8
reciprocal frames
Rizzuto, J.P. and Larsen, O.Popovic (2010) Connection systems in reciprocal frames and mutually supported elements space structure networks. International Journal of Space Structures, 25 (4). pp. 243-256. ISSN 0266-3511 (Submitted) (doi:10.1260/0266-3511.25.4.243)
reinforcement corrosion
Li, Chun-Qing and Shao, L. (2007) Reliability based asset management strategy for concrete infrastructure. International Journal of Materials and Structural Reliability, 5 (1). pp. 13-28.
remelting
Yuan, L., Lee, Peter D., Djambazov, Georgi and Pericleous, Koulis A. (2009) Multiscale modeling of the onset of freckle formation during vacuum arc remelting. In: International Symposium on Liquid Metal Processing and Casting - LMPC 2009. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 39-46. ISBN 978-0-87339-743-8
repair and overhaul (MRO)
Zhu, Haihua, Gao, James, Li, Dongbo and Tang, Dunbing (2012) A Web-based Product Service System for aerospace maintenance, repair and overhaul services. Computers in Industry, 63 (4). pp. 338-348. ISSN 0166-3615 (doi:10.1016/j.compind.2012.02.016)
repeatability
Bradley, Michael S.A. and Berry, Rob (2007) Investigation of the effect of test procedure factors on the failure loci and derived failure functions obtained from annular shear cells. Powder Technology, 174 (1-2). pp. 60-63. ISSN 0032-5910 (doi:10.1016/j.powtec.2006.10.023)
requirements management
Baxter, David, Gao, James, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2008) A framework to integrate design knowledge reuse and requirements management in engineering design. Robotics and Computer-Integrated Manufacturing, 24 (4). pp. 585-593. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.010)
rheological behaviour
Mallik, Sabuj, Ekere, Ndy, Marks, Antony, Seman, Anton and Durairaj, Rajkumar (2008) Modelling of the time-dependent flow behaviour of lead-free solder pastes used for flip-chip assembly applications. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 1219-1224. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684527)
rheology
Mallik, Sabuj, Schmidt, M., Bauer, R. and Ekere, Ndy (2008) Influence of solder paste components on rheological behaviour. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, USA, pp. 1135-1140. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684512)
Marks, A.E., Mallik, S., Ekere, N.N. and Seman, A. (2008) Effect of temperature on slumping behaviour of lead-free solder paste and its rheological simulation. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 829-832. ISBN 97814244-28137 (Print), 978-1-4244-2814-4 (Electronic) (doi:10.1109/ESTC.2008.4684459)
rheology measurement
Seman, Anton (2010) On-line non-destructive ultrasonic rheology measurement of solder pastes. PhD thesis, University of Greenwich.
risk
Li, Chun-Qing and Shao, L. (2007) Reliability based asset management strategy for concrete infrastructure. International Journal of Materials and Structural Reliability, 5 (1). pp. 13-28.
risk mitigation
Narania, Sailesh, Eshahawi, Tarek, Gindy, Nabil, Tang, Ying Kit, Stoyanov, Stoyan, Ridout, Stephen and Bailey, Chris (2008) Risk mitigation framework for a robust design process. In: 2nd Electronics System-Integration Technology Conference, 2008. ESTC 2008. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1075-1080. ISBN 978-1-4244-2814-4 (Print), 978-1-4244-2813-7 (Online) (doi:10.1109/ESTC.2008.4684501)
segregation
Bradley, Michael S.A., Farnish, Richard J., Reed, Alan R. and Kulkarni, Prasanna (2007) Evaluation of air induced segregation tendencies in pharmaceutical blends using a bench scale tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)
Farnish, Richard J., Kulkarni, Prasanna and Bradley, Michael S.A. (2008) Segregation of bulk particulates through multiple process handling steps. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 505-510. ISBN 9788272062896
service engineering
Gao, James, Baxter, David, Doultsinou, Nancy and Roy, Rajkumar (2007) Identification of service knowledge types for technical product-service systems. In: Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath, pp. 549-555.
service issues
Doultsinou, Athanasia, Roy, Rajkumar, Baxter, David and Gao, James (2008) Key service issues in two UK manufacturing companies from a PSS perspective. In: Proceedings of the Cranfield Multi-Strand Conference: Creating Wealth Through Research and Innovation (CMC 2008): 6-7 May 2008. Cranfield University Press, Cranfield University, pp. 287-292. ISBN 9780955743672
service knowledge
Doultsinou, Athanasia, Roy, Rajkumar, Baxter, David, Gao, James and Mann, Andy (2009) Developing a service knowledge reuse framework for engineering design. Journal of Engineering Design, 20 (4). pp. 389-411. ISSN 0954-4828 (Print), 1466-1837 (Online) (doi:10.1080/09544820903149354)
Gao, James, Baxter, David, Doultsinou, Nancy and Roy, Rajkumar (2007) Identification of service knowledge types for technical product-service systems. In: Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath, pp. 549-555.
service model
Zhu, Haihua, Gao, James, Li, Dongbo and Tang, Dunbing (2012) A Web-based Product Service System for aerospace maintenance, repair and overhaul services. Computers in Industry, 63 (4). pp. 338-348. ISSN 0166-3615 (doi:10.1016/j.compind.2012.02.016)
shape casting
Cross, M., McBride, D., Croft, T.N., Williams, A.J., Pericleous, K. and Lawrence, J.A. (2006) Computational modeling of mold filling and related free-surface flows in shape casting: an overview of the challenges involved. Metallurgical and Materials Transactions B, 37 (6). pp. 879-885. ISSN 1073-5615 (Print), 1543-1916 (Online) (doi:10.1007/BF02735009)
shape materials
Owonikoko, A., Berry, R.J. and Bradley, M.S.A. (2010) Characterisation of extreme shape materials: “biomass and waste materials”. In: Bulk Solids Europe 2010 Conference and IMechE Symposium in New Frontiers in Bulk Materials Handling , 9-10 September 2010, Glasgow. (Submitted)
shear displacement
Bradley, Michael S.A. and Berry, Rob (2007) Investigation of the effect of test procedure factors on the failure loci and derived failure functions obtained from annular shear cells. Powder Technology, 174 (1-2). pp. 60-63. ISSN 0032-5910 (doi:10.1016/j.powtec.2006.10.023)
shear testers
Berry, Rob, Bradley, Michael S.A., Farnish, Richard J. and Angulo Pinzon, O.A. (2008) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 344-350. ISBN 9788272062896
Bradley, Michael S.A., Berry, Rob, Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia. (Unpublished)
silicon
Shimasaki, S., Imanishi, K., Taniguchi, S. and Bojarevics, Valdis (2009) Manufacturing of uniformly-sized silicon particles for solar cell from molten metal jet by electromagnetic pinch force. In: 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN Forschungszentrum Dresden-Rossendorf
slag-refractory interactions
Campbell, Andrew Paul (2002) Modelling of freeze layer formation and refractory wear in direct smelting process. PhD thesis, University of Greenwich.
smart fabrics
Majcen, Natasa, Snowden, Martin, Mitchell, John C., Cornelius, Victoria J. and Voncina, Bojana (2005) The development of smart fabrics. Journal of Pharmacy and Pharmacology, 57 (Suppl.). S58-S58. ISSN Online ISSN: 2042-7158
smelting processes
Campbell, Andrew Paul (2002) Modelling of freeze layer formation and refractory wear in direct smelting process. PhD thesis, University of Greenwich.
software errors
Bhatti, Rajinderpal, Chowdary, Boppana V. and Sahatoo, Divesh (2007) Some STL file generation issues in rapid prototyping. In: 5th Latin American and Caribbean Conference for Engineering and Technology Developing Entrepreneural Engineers for the Sustainable Growth of Latin American and Caribbean: Education, Innovation, Technology, and Practice. Latin American and Caribbean Consortium of Engineering Institutions, Florida. ISBN 098228960X
solar cells
Shimasaki, S., Imanishi, K., Taniguchi, S. and Bojarevics, Valdis (2009) Manufacturing of uniformly-sized silicon particles for solar cell from molten metal jet by electromagnetic pinch force. In: 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN Forschungszentrum Dresden-Rossendorf
solder joints
Durairaj, Rajkumar, Mallik, Sabuj, Seman, Anton, Marks, Antony and Ekere, Ndy (2008) Investigation of wall-slip effect on paste release characteristic in flip-chip stencil printing process. In: 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1328-1333. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763615)
solder particles
Seman, Anton (2010) On-line non-destructive ultrasonic rheology measurement of solder pastes. PhD thesis, University of Greenwich.
solder pastes
Durairaj, Rajkumar, Mallik, Sabuj, Seman, Anton, Marks, Antony and Ekere, Ndy (2008) Investigation of wall-slip effect on paste release characteristic in flip-chip stencil printing process. In: 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1328-1333. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763615)
Mallik, Sabuj, Ekere, Ndy, Marks, Antony, Seman, Anton and Durairaj, Rajkumar (2008) Modelling of the time-dependent flow behaviour of lead-free solder pastes used for flip-chip assembly applications. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 1219-1224. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684527)
Mallik, Sabuj, Schmidt, M., Bauer, R. and Ekere, Ndy (2008) Influence of solder paste components on rheological behaviour. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, USA, pp. 1135-1140. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684512)
Marks, A.E., Mallik, S., Ekere, N.N. and Seman, A. (2008) Effect of temperature on slumping behaviour of lead-free solder paste and its rheological simulation. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 829-832. ISBN 97814244-28137 (Print), 978-1-4244-2814-4 (Electronic) (doi:10.1109/ESTC.2008.4684459)
Seman, Anton (2010) On-line non-destructive ultrasonic rheology measurement of solder pastes. PhD thesis, University of Greenwich.
solidification
Yuan, Lang, Lee, Peter D., Djambazov, Georgi and Pericleous, Koulis A. (2010) Three-dimensional simulation of the influence of convection on dendritic solidification. In: Modeling of Casting, Welding, and Advanced Solidification Processes - XII (MCWASP XII). John Wiley & Sons, Inc. / The Minerals, Metals & Materials Society, Warrendale, PA, USA, pp. 451-458. ISBN 978-0-87339-742-1 (hbk)
solute diffusion
Yuan, Lang, Lee, Peter D., Djambazov, Georgi and Pericleous, Koulis A. (2010) Three-dimensional simulation of the influence of convection on dendritic solidification. In: Modeling of Casting, Welding, and Advanced Solidification Processes - XII (MCWASP XII). John Wiley & Sons, Inc. / The Minerals, Metals & Materials Society, Warrendale, PA, USA, pp. 451-458. ISBN 978-0-87339-742-1 (hbk)
space structures
Rizzuto, J.P. and Larsen, O.Popovic (2010) Connection systems in reciprocal frames and mutually supported elements space structure networks. International Journal of Space Structures, 25 (4). pp. 243-256. ISSN 0266-3511 (Submitted) (doi:10.1260/0266-3511.25.4.243)
spatial reasoning
Saeed, Soran (2006) An investigation into establishing a generalised approach for defining similarity metrics between 3D shapes for case-based reasoning (CBR). PhD thesis, University of Greenwich.
spectral-collocation based free surface code SPHINX
Roy, A.A., Easter, S., Bojarevics, V. and Pericleous, K. (2012) Use of a static magnetic field in measuring the thermal conductivity of a levitated molten droplet. Journal of Algorithms and Computational Technology, 6 (1). pp. 153-172. ISSN 1748-3018 (Print) (doi:10.1260/1748-3018.6.1.153)
steel converter
Djambazov, G., Pericleous, K., Lebon, B., Doh, Y., Jardy, A., Chapelle, P., Ghazal, G. and Gardin , P. (2012) Investigation of a possible route for oxygen transport via the metal droplets in top-blown steel converters. In: International Symposium on Liquid Metal Processing and Casting (LMPC). Wiley International, pp. 159-166. ISBN 978-1-1180-0202-5 (In Press)
STEP
Aziz, Hayder, Li, Zhengxi and Gao, James (2008) Engineering design knowledge management in de-centralised virtual enterprises. Computer Aided Design and Applications, 5 (6). pp. 787-800. ISSN 1686-4360 (doi:10.3722/cadaps.2008.787-800)
STL
Sahatoo, Divesh, Chowdary, Boppana V., Ali, Fahraz F. and Bhatti, Rajinderpal (2008) Slicing issues in CAD translation to STL in rapid prototyping. In: Proceedings of The 2008 IAJC-IJME International Conference. International Association of Journals and Conferences/International Journal of Modern Engineering, California State University, Northridge. ISBN 9781606433799
STL file generation
Bhatti, Rajinderpal, Chowdary, Boppana V. and Sahatoo, Divesh (2007) Some STL file generation issues in rapid prototyping. In: 5th Latin American and Caribbean Conference for Engineering and Technology Developing Entrepreneural Engineers for the Sustainable Growth of Latin American and Caribbean: Education, Innovation, Technology, and Practice. Latin American and Caribbean Consortium of Engineering Institutions, Florida. ISBN 098228960X
strategic alliances
Butler, Colin J. (2010) Internal and lateral communication in strategic alliance decision making. Management Decision, 48 (5). pp. 698-712. ISSN 0025 1747 (doi:10.1108/00251741011043885)
strategy integration
Bhatti, Rajinderpal and Berkhauer-Smith, Samantha (2007) Integrating both technical and cultural aspects of process improvement. In: 5th International Conference on Manufacturing Research (ICMR 2007) , 11- 13 September 2007, De Montfort University Leicester. (Unpublished)
stratified sea layers
Bojarevics, V. and Pericleous, K. (2005) Nonlinear MHD stability of aluminium reduction cells. In: The 15th Riga and 6th PAMIRConference on Fundamental and Applied MHD. MHD-Online, Institute of Physics, University of Latvia, pp. 87-90.
stress
Mallik, Sabuj, Schmidt, M., Bauer, R. and Ekere, Ndy (2008) Influence of solder paste components on rheological behaviour. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, USA, pp. 1135-1140. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684512)
Marks, A.E., Mallik, S., Ekere, N.N. and Seman, A. (2008) Effect of temperature on slumping behaviour of lead-free solder paste and its rheological simulation. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 829-832. ISBN 97814244-28137 (Print), 978-1-4244-2814-4 (Electronic) (doi:10.1109/ESTC.2008.4684459)
Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) Development of an in-situ, non-destructive ultrasonic monitoring technique for solder pastes. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 209-214. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684351)
Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) In-situ non-destructive ultrasonic rheology technique for monitoring different lead-free solder pastes for surface mount applications. In: 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1448-1454. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763635)
superheat
Harding, R.A., Wickins, M., Keough, G., Roberts, R.J., Pericleous, Kyriacos and Bojarevics, Valdis (2005) The use of combined DC and AC fields to increase superheat in an induction skull melting furnace. In: LMPC 2005 : proceedings of the 2005 international symposium on liquid metal processing and casting : Santa Fe, New Mexico, USA, September 18-21, 2005. ASM International, Materials Park, Ohio, USA, pp. 201-210. ISBN 0871708272; 978-087170827-4
superheaters
Harding, R.A., Wickins, M., Keough, G., Roberts, R.J., Pericleous, Kyriacos and Bojarevics, Valdis (2005) The use of combined DC and AC fields to increase superheat in an induction skull melting furnace. In: LMPC 2005 : proceedings of the 2005 international symposium on liquid metal processing and casting : Santa Fe, New Mexico, USA, September 18-21, 2005. ASM International, Materials Park, Ohio, USA, pp. 201-210. ISBN 0871708272; 978-087170827-4
supplier
Tian, Wei and Zhou, Li (2012) Comparison of supply chain consigning collaborative innovation modes. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 407-411. ISSN 1022-6680 (doi:10.4028/www.scientific.net/AMR.452-453.407)
supply chain
Berkhauer-Smith, Samantha (2009) The integration of lean thinking and manufacturing business improvement methods within the aerospace supply chain. PhD thesis, University of Greenwich.
Gueded, Jose and Mateus, Cesario (2009) Trade credit linkages along the supply chain: evidence for the Italian textile sector. In: European Financial Management Association 2009 Annual Meetings, 24-27 Jun 2009, Milan, Italy.
Tian, Wei and Zhou, Li (2012) Comparison of supply chain consigning collaborative innovation modes. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 407-411. ISSN 1022-6680 (doi:10.4028/www.scientific.net/AMR.452-453.407)
supply chain management
Folinas, Dimitris and Manikas, Ioannis (2010) Design and development of an e-platform for supporting liquid food supply chain monitoring and traceability. International Journal of Information Systems and Supply Chain Management (IJISSCM), 3 (3). pp. 29-49. ISSN 1935-5726 (print), 1935-5734 (on-line) (doi:10.4018/jisscm.2010070103)
Manos, Basil and Manikas, Ioannis (2010) Traceability in the Greek fresh produce sector: drivers and constraints. British Food Journal, 112 (6). pp. 640-652. ISSN 0007-070X (doi:DOI 10.1108/00070701011052727)
surface tension
Easter, S., Bojarevics, Valdis and Pericleous, Koulis A. (2009) Determining surface tension using DC magnetic levitation. In: 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN 978-3-936104-65-3
surgical tools
Le, C.H., Okereke, M.I., Nguyen, V.H., Dao, V.D., Soe, S., Zlatov, N. and Le, T.H. (2011) Personalised medical product development: Methods, challenges and opportunities. Romanian Review Precision Mechanics, Optics and Mechatronics, 40. pp. 11-20. ISSN 1584-5982
technical product-service systems
Doultsinou, Athanasia, Roy, Rajkumar, Baxter, David and Gao, James (2008) Key service issues in two UK manufacturing companies from a PSS perspective. In: Proceedings of the Cranfield Multi-Strand Conference: Creating Wealth Through Research and Innovation (CMC 2008): 6-7 May 2008. Cranfield University Press, Cranfield University, pp. 287-292. ISBN 9780955743672
Gao, James, Baxter, David, Doultsinou, Nancy and Roy, Rajkumar (2007) Identification of service knowledge types for technical product-service systems. In: Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath, pp. 549-555.
technical services
Doultsinou, Athanasia, Roy, Rajkumar, Baxter, David, Gao, James and Mann, Andy (2009) Developing a service knowledge reuse framework for engineering design. Journal of Engineering Design, 20 (4). pp. 389-411. ISSN 0954-4828 (Print), 1466-1837 (Online) (doi:10.1080/09544820903149354)
technology
Yin, Chunyan (2006) Experimental and modelling analysis on the performance of anisotropic conductive films as used in electronics packaging. PhD thesis, University of Greenwich.
thermoelectric MHD
Kao, Andrew, Pericleous, Koulis A., Patel, Mayur and Voller, V. (2009) Thermoelectric MHD effects on equiaxed crystal morphology. In: 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN Forschungszentrum Dresden-Rossendorf
thermoelectricity
Kao, A., Pericleous, K., Patel, M.K. and Voller, V. (2009) Effects of magnetic fields on crystal growth. International Journal of Cast Metals Research, 22 (1-4). pp. 147-150. ISSN 1364-0461 (Print), 1743-1336 (Online) (doi:10.1179/136404609X367551)
Kao, Andrew, Pericleous, Koulis A., Patel, Mayur K. and Voller, Vaughan R. (2010) Thermoelectric effects on alloy solidification microstructure. In: Modeling of Casting, Welding, and Advanced Solidification Processes. John Wiley & Sons, Inc. / The Minerals, Metals & Materials Society, Warrendale, PA, USA, pp. 521-528. ISBN 978-0-87339-742-1 (hbk)
thermophysical properties
Roy, A.A., Easter, S., Bojarevics, V. and Pericleous, K. (2012) Use of a static magnetic field in measuring the thermal conductivity of a levitated molten droplet. Journal of Algorithms and Computational Technology, 6 (1). pp. 153-172. ISSN 1748-3018 (Print) (doi:10.1260/1748-3018.6.1.153)
tilt casting
Wang, H., Djambazov, G., Pericleous, K., Harding, R.A. and Wickins, M. (2012) Numerical modelling of tilt casting process for γ-TiAl alloys. International Journal of Cast Metals Research, 25 (2). pp. 65-74. ISSN 1364-0461 (Print), 1743-1336 (Online) (doi:10.1179/1743133611Y.0000000024)
titanium alloys
Harding, R. A., Wickins, M, Bojarevics, Valdis and Pericleous, Kyriacos (2003) Obtaining data to validate a model of an induction skull melting furnace. In: Modeling of Casting, Welding and Advanced Solidification Processes. TMS, Destin, FL , pp. 741-748. ISBN 0873395557
Harding, R.A., Wickins, M., Keough, G., Roberts, R.J., Pericleous, Kyriacos and Bojarevics, Valdis (2005) The use of combined DC and AC fields to increase superheat in an induction skull melting furnace. In: LMPC 2005 : proceedings of the 2005 international symposium on liquid metal processing and casting : Santa Fe, New Mexico, USA, September 18-21, 2005. ASM International, Materials Park, Ohio, USA, pp. 201-210. ISBN 0871708272; 978-087170827-4
titanium alumindes
Wang, Hong (2008) Numerical modelling of the tilt casting processes of titanium alumindes. PhD thesis, University of Greenwich.
titanium aluminide
Wang, Hong, Djambazov, Georgi, Pericleous, Koulis A., Harding, Richard A. and Wickins, Michael (2010) Modelling the tilt-casting process for the tranquil filling of titanium alloy turbine blades. In: Modeling of Casting, Welding, and Advanced Solidification Processes - XII (MCWASP XII). John Wiley and SOns, Inc. / The Minerals, Metals & Materials Society (TMS), Warrendale, PA, USA, pp. 53-60. ISBN 978-0-87339-742-1
tolerance
Bhatti, Rajinderpal, Chowdary, Boppana V. and Sahatoo, Divesh (2007) Some STL file generation issues in rapid prototyping. In: 5th Latin American and Caribbean Conference for Engineering and Technology Developing Entrepreneural Engineers for the Sustainable Growth of Latin American and Caribbean: Education, Innovation, Technology, and Practice. Latin American and Caribbean Consortium of Engineering Institutions, Florida. ISBN 098228960X
tolerance analysis
Eadie, R. and Gao, James (2008) An industrial implementation of a methodology for the optimisation of product design tolerances. In: Advances in manufacturing technology XXII: the proceedings of the 6th International Conference on Manufacturing Research ICMR08, 9th-11th September 2008, London UK. Brunel University College, Brunel University, pp. 161-170. ISBN 9781902316604
total cost
Li, Chun-Qing and Shao, L. (2007) Reliability based asset management strategy for concrete infrastructure. International Journal of Materials and Structural Reliability, 5 (1). pp. 13-28.
traceability
Folinas, Dimitris and Manikas, Ioannis (2010) Design and development of an e-platform for supporting liquid food supply chain monitoring and traceability. International Journal of Information Systems and Supply Chain Management (IJISSCM), 3 (3). pp. 29-49. ISSN 1935-5726 (print), 1935-5734 (on-line) (doi:10.4018/jisscm.2010070103)
tracking
Manos, Basil and Manikas, Ioannis (2010) Traceability in the Greek fresh produce sector: drivers and constraints. British Food Journal, 112 (6). pp. 640-652. ISSN 0007-070X (doi:DOI 10.1108/00070701011052727)
trade credit
Gueded, Jose and Mateus, Cesario (2009) Trade credit linkages along the supply chain: evidence for the Italian textile sector. In: European Financial Management Association 2009 Annual Meetings, 24-27 Jun 2009, Milan, Italy.
TRIZ
Gao, James, Fei, Genyuan and Tang, X.Q. (2009) A TRIZ based methodology for the analysis of the coupling problems in complex engineering design. In: Proceedings of the 19th CIRP Design Conference – Competitive Design, 30-31 March 2009. Cranfield University Press, Cranfield University, pp. 285-292. ISBN 9780955743641
turbulent flow
Harding, R.A., Wickins, M., Keough, G., Roberts, R.J., Pericleous, Kyriacos and Bojarevics, Valdis (2005) The use of combined DC and AC fields to increase superheat in an induction skull melting furnace. In: LMPC 2005 : proceedings of the 2005 international symposium on liquid metal processing and casting : Santa Fe, New Mexico, USA, September 18-21, 2005. ASM International, Materials Park, Ohio, USA, pp. 201-210. ISBN 0871708272; 978-087170827-4
ultrasonic testing
Seman, Anton (2010) On-line non-destructive ultrasonic rheology measurement of solder pastes. PhD thesis, University of Greenwich.
undercooling
Kao, A., Pericleous, K., Patel, M.K. and Voller, V. (2009) Effects of magnetic fields on crystal growth. International Journal of Cast Metals Research, 22 (1-4). pp. 147-150. ISSN 1364-0461 (Print), 1743-1336 (Online) (doi:10.1179/136404609X367551)
Kao, Andrew, Pericleous, Koulis A., Patel, Mayur K. and Voller, Vaughan R. (2010) Thermoelectric effects on alloy solidification microstructure. In: Modeling of Casting, Welding, and Advanced Solidification Processes. John Wiley & Sons, Inc. / The Minerals, Metals & Materials Society, Warrendale, PA, USA, pp. 521-528. ISBN 978-0-87339-742-1 (hbk)
United Kingdom
Butler, Colin J. (2010) Internal and lateral communication in strategic alliance decision making. Management Decision, 48 (5). pp. 698-712. ISSN 0025 1747 (doi:10.1108/00251741011043885)
validation and verification
Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2009) Manufacturing knowledge verification in design support systems. International Journal of Production Research, 47 (12). pp. 3179-3204. ISSN 0020-7543 (Print), 1366–588X (Online) (doi:10.1080/00207540701802452)
valves (mechanical)
Harding, R. A., Wickins, M, Bojarevics, Valdis and Pericleous, Kyriacos (2003) Obtaining data to validate a model of an induction skull melting furnace. In: Modeling of Casting, Welding and Advanced Solidification Processes. TMS, Destin, FL , pp. 741-748. ISBN 0873395557
VAR
Pericleous, Koulis A., Djambazov, Georgi, Bojarevics, Valdis and Ward, R.M. (2009) A unified 3D model of the VAR process. In: International Symposium on Liquid Metal Processing and Casting - LMPC 2009. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 21-28. ISBN 978-0-87339-743-8
virtual enterprise
Aziz, Hayder, Li, Zhengxi and Gao, James (2008) Engineering design knowledge management in de-centralised virtual enterprises. Computer Aided Design and Applications, 5 (6). pp. 787-800. ISSN 1686-4360 (doi:10.3722/cadaps.2008.787-800)
viscosity
Durairaj, Rajkumar, Mallik, Sabuj, Seman, Anton, Marks, Antony and Ekere, Ndy (2008) Investigation of wall-slip effect on paste release characteristic in flip-chip stencil printing process. In: 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1328-1333. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763615)
Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) In-situ non-destructive ultrasonic rheology technique for monitoring different lead-free solder pastes for surface mount applications. In: 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1448-1454. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763635)
waste materials
Owonikoko, A., Berry, R.J. and Bradley, M.S.A. (2010) Characterisation of extreme shape materials: “biomass and waste materials”. In: Bulk Solids Europe 2010 Conference and IMechE Symposium in New Frontiers in Bulk Materials Handling , 9-10 September 2010, Glasgow. (Submitted)
welding
Harding, R. A., Wickins, M, Bojarevics, Valdis and Pericleous, Kyriacos (2003) Obtaining data to validate a model of an induction skull melting furnace. In: Modeling of Casting, Welding and Advanced Solidification Processes. TMS, Destin, FL , pp. 741-748. ISBN 0873395557
X-ray micro tomography
Tian, Kun V., Nagy, Peter M., Chass, Gregory A., Fejerdy, Pal, Nicholson, John W., Csizmadia, Imre G. and Dobo´-Nagy, Csaba (2012) Qualitative assessment of microstructure and Hertzian indentation failure in biocompatible glass ionomer cements. Journal of Materials Science: Materials in Medicine, 23. pp. 677-685. ISSN 0957-4530 (Print), 1573-4838 (Online) (doi:10.1007/s10856-012-4553-2)
yam flour
Shehu, T. and Bhatti, R.S. (2012) The use of Yam flour (starch) as binder for sand mould production in Nigeria. World Applied Sciences Journal, 16 (6). pp. 858-862. ISSN 1818-495 (doi:wasj/wasj16(6)12/14.pdf)
“MHD noise”
Bojarevics, V. and Pericleous, K. (2005) Nonlinear MHD stability of aluminium reduction cells. In: The 15th Riga and 6th PAMIRConference on Fundamental and Applied MHD. MHD-Online, Institute of Physics, University of Latvia, pp. 87-90.
“shallow water approximation”
Bojarevics, V. and Pericleous, K. (2005) Nonlinear MHD stability of aluminium reduction cells. In: The 15th Riga and 6th PAMIRConference on Fundamental and Applied MHD. MHD-Online, Institute of Physics, University of Latvia, pp. 87-90.