Mortada, Youssef, Masad, Eyad, Kogbara, Reginald ORCID: 0000-0002-0227-4676 , Mansoor, Bilal, Seers, Thomas, Hammoud, Ahmad and Karaki, Ayman (2023) Development of Ca(OH)2-based geopolymer for additive manufacturing using construction wastes and nanomaterials. Case Studies in Construction Materials, 19:e02258. pp. 1-18. ISSN 2214-5095 (doi:https://doi.org/10.1016/j.cscm.2023.e02258)

Preview

PDF (VoR) 46366_KOGBARA_ Development_of_Ca(OH)2-based_geopolymer_for_additive_manufacturing_using_construction_wastes.pdf - Published Version Available under License Creative Commons Attribution. Download (6MB) | Preview

Abstract

Recent growth in additive manufacturing (AM) or 3D printing in the construction field has motivated the development of various materials that vary in its composition and properties. This paper introduces, characterizes, and evaluates the performance of a sustainable and environmentally friendly geopolymer mixture composed of construction wastes. The geopolymer mixture has calcium hydroxide (Ca(OH)2) as the main alkaline activator and incorporates nanomaterials such as nano-silica and nano-clay to enhance its suitability for AM. The combined use of Ca(OH)2 for alkali activation, and nanomaterials for tailoring the behavior of construction wastes for 3D printing, is novel and addresses the shortcomings of conventional alkaline activators. The paper includes the outcomes of the analysis of the mechanical properties, printability, and microstructure of the geopolymer mixture. The 28-day compressive strength of the mixture reached 42 MPa with ambient temperature curing, which is comparable to traditional geopolymers. The inclusion of 1 wt % of nano-silica accelerated the geopolymerization process and led to the largest (35 %) reduction in the setting time. Similarly, incorporating 1 wt % of nano-clay led to reduction of the thermal conductivity from 0.709 W/mK to 0.505 W/mK, due to the introduction of thermal barriers. The printability of the studied waste-based geopolymer mixture was validated through the successful fabrication of a 3D-printed model.

Item Type:	Article
Uncontrolled Keywords:	additive manufacturing; geopolymer; sustainability; waste; nanomaterial
Subjects:	T Technology > T Technology (General) T Technology > TA Engineering (General). Civil engineering (General) T Technology > TH Building construction
Faculty / School / Research Centre / Research Group:	Faculty of Engineering & Science Faculty of Engineering & Science > School of Engineering (ENG)
Last Modified:	22 Mar 2024 10:48
URI:	http://gala.gre.ac.uk/id/eprint/46366

Actions (login required)

View Item

Downloads