Scale-up and design of a continuous microwave treatment system for the processing of oil-contaminated drill cuttings
Robinson, J.P., Kingman, S.W., Snape, C.E., Bradshaw, S.M., Bradley, M.S.A., Shang, H. and Barranco, R. (2010) Scale-up and design of a continuous microwave treatment system for the processing of oil-contaminated drill cuttings. Chemical Engineering Research and Design, 88 (2). pp. 146-154. ISSN 0263-8762 (doi:10.1016/j.cherd.2009.07.011)Full text not available from this repository.
A continuous microwave treatment system has been developed for the remediation of contaminated drill cuttings at pilot scale. Using the mechanisms of oil removal as a basis, a design was produced using electromagnetic simulations to find the optimum microwave applicator geometry which yielded the most favourable power density distribution. Bulk materials handling and process engineering principles were systematically integrated with the electromagnetic design to produce a system capable of treating 500 kg/h of material. The effects of the key design parameters are simulated, and a number of the simulations are verified with experimental data. It is shown that the environmental discharge threshold of 1% oil can be achieved in continuous operation, and the sensitivity of the system to changing feedstock properties is also highlighted. The parity between the simulations and experimental results in this paper highlights the necessity of electromagnetic modelling in the design and scale-up microwave processing equipment.
|Additional Information:|| First published online: 13 August 2009.  Published in print: February 2010.  Published as: Chemical Engineering Research and Design, (2010), Vol. 88, (2), pp. 146–154.  Official Journal of the European Federation of Chemical Engineering.  Publication of the Institution of Chemical Engineers.|
|Uncontrolled Keywords:||scale-up, simulation, microwave, continuous, drill cuttings|
|Subjects:||T Technology > TA Engineering (General). Civil engineering (General)|
T Technology > TP Chemical technology
|School / Department / Research Groups:||School of Engineering|
School of Engineering > Wolfson Centre for Bulk Solids Handling Technology
School of Computing & Mathematical Sciences > Centre for Numerical Modelling & Process Analysis
|Last Modified:||13 Dec 2013 12:05|
Actions (login required)