Article

Hajmohammadi, Hajar and Salehi, Hamid ORCID: 0000-0002-2516-6619 (2024) The impacts of COVID-19 lockdowns on road transport air pollution in London: a state-space modelling approach. International Journal of Environmental Research and Public Health, 21 (9):1153. pp. 1-12. ISSN 1660-4601 (Print), 1661-7827 (Online) (doi:https://doi.org/10.3390/ijerph21091153)

Sarnavi, Hamed J., Precoppe, Marcelo ORCID: 0000-0002-7937-5782 , Salehi, Hamid ORCID: 0000-0002-2516-6619 , Bradley, Michael S.A. and García-Triñanes, Pablo ORCID: 0000-0002-4993-2250 (2022) Study of the evolution of drying-induced flow properties for pulverised cassava grits. Journal of Food Engineering, 338:111221. ISSN 0260-8774 (doi:https://doi.org/10.1016/j.jfoodeng.2022.111221)

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Salehi, Hamid ORCID: 0000-0002-2516-6619 and Bradley, Michael S. A. (2021) Correlations between segregation intensity and material properties such as particle sizes and adhesions and novel methods for assessment. Powder Technology, 387. pp. 215-226. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.04.023)

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Salehi, Hamid ORCID: 0000-0002-2516-6619 and Bradley, Michael S. A. (2020) An experimental study on free-surface rolling segregation and correlations with angle of repose and particle sphericity. Powder Technology, 379. pp. 307-320. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2020.10.077)

Russell, Alexander, Larsson, Sylvia, Shekhar, Shishir, Solomon, Isaac, Salehi, Hamid ORCID: 0000-0002-2516-6619 , Subirana, Jordi and Samuelsson, Robert (2019) Deformation and breakage of biofuel wood pellets. Chemical Engineering Research and Design, 153. pp. 419-426. ISSN 0263-8762 (Print), 1744-3563 (Online) (doi:https://doi.org/10.1016/j.cherd.2019.10.034)

Salehi, Hamid ORCID: 0000-0002-2516-6619 , Berry, Robert, Farnish, Richard and Bradley, Mike (2019) Temperature and time consolidation effect on the bulk flow properties and arching tendency of a detergent powder. Chemical Engineering & Technology, 43 (1). pp. 150-156. ISSN 0930-7516 (Print), 1521-4125 (Online) (doi:https://doi.org/10.1002/ceat.201900092)

Salehi, Hamid, Berry, Robert, Farnish, Richard and Bradley, Mike (2019) A new uniaxial compression tester: development and application. Chemical Engineering Transactions, 74. pp. 463-468. ISSN 2283-9216 (doi:https://doi.org/10.3303/CET1974078)

Salehi, Hamid ORCID: 0000-0002-2516-6619 , Berry, Robert, Deng, Tong ORCID: 0000-0003-4117-4317 , Larsson, Sylvia H., Farnish, Richard and Bradley, Mike (2019) Development and application of a novel cake strength tester. Powder Technology, 350. pp. 36-42. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2019.03.024)

Salehi, Hamid ORCID: 0000-0002-2516-6619 , Barletta, Diego, Poletto, Massimo and Larsson, Sylvia (2018) Predicting the silo discharge behavior of wood chips - a choice of method. Biomass and Bioenergy, 120. pp. 211-218. ISSN 0961-9534 (doi:https://doi.org/10.1016/j.biombioe.2018.11.023)

Salehi, Hamid ORCID: 0000-0002-2516-6619 , Sofia, Daniele, Schutz, Denis, Barletta, Diego and Poletto, Massimo (2018) Experiments and simulation of torque in Anton Paar powder cell. Particulate Science and Technology, 36 (4). pp. 501-512. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:https://doi.org/10.1080/02726351.2017.1409850)

Salehi, Hamid ORCID: 0000-0002-2516-6619 , Lotrecchiano, Nicoletta, Barletta, Diego and Poletto, Massimo (2017) Dust release from aggregative cohesive powders subjected to vibration. Industrial and Engineering Chemistry Research, 56 (43). pp. 12326-12336. ISSN 0888-5885 (Print), 1520-5045 (Online) (doi:https://doi.org/10.1021/acs.iecr.7b02241)

Salehi, Hamid ORCID: 0000-0002-2516-6619 , Barletta, Diego and Poletto, Massimo (2017) A comparison between powder flow property testers. Particuology, 32. pp. 10-20. ISSN 1674-2001 (doi:https://doi.org/10.1016/j.partic.2016.08.003)