Article

Russell, Alexander, Larsson, Sylvia, Shekhar, Shishir, Solomon, Isaac, Salehi, Hamid, Subirana, Jordi and Samuelsson, Robert (2019) Deformation and breakage of biofuel wood pellets. Chemical Engineering Research and Design, 153. pp. 419-426. ISSN 0263-8762 (Print), 1744-3563 (Online) (doi:https://doi.org/10.1016/j.cherd.2019.10.034)

Salehi, Hamid, Berry, Robert, Farnish, Richard and Bradley, Mike (2019) Temperature and time consolidation effect on the bulk flow properties and arching tendency of a detergent powder. Chemical Engineering & Technology, 43 (1). pp. 150-156. ISSN 0930-7516 (Print), 1521-4125 (Online) (doi:https://doi.org/10.1002/ceat.201900092)

Salehi, Hamid, Berry, Robert, Deng, Tong ORCID: 0000-0003-4117-4317, Larsson, Sylvia H., Farnish, Richard and Bradley, Michael (2019) Development and application of a novel cake strength tester. Powder Technology, 350. pp. 36-42. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2019.03.024)

Salehi, Hamid, Berry, Robert, Deng, Tong ORCID: 0000-0003-4117-4317, Larsson, Sylvia H., Farnish, Richard and Bradley, Mike (2019) Development and application of a novel cake strength tester. Powder Technology, 350. pp. 36-42. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2019.03.024)

Salehi, Hamid, Barletta, Diego, Poletto, Massimo and Larsson, Sylvia (2018) Predicting the silo discharge behavior of wood chips - a choice of method. Biomass and Bioenergy, 120. pp. 211-218. ISSN 0961-9534 (doi:https://doi.org/10.1016/j.biombioe.2018.11.023)

Salehi, Hamid, Sofia, Daniele, Schutz, Denis, Barletta, Diego and Poletto, Massimo (2018) Experiments and simulation of torque in Anton Paar powder cell. Particulate Science and Technology, 36 (4). pp. 501-512. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:https://doi.org/10.1080/02726351.2017.1409850)

Salehi, Hamid, Lotrecchiano, Nicoletta, Barletta, Diego and Poletto, Massimo (2017) Dust release from aggregative cohesive powders subjected to vibration. Industrial and Engineering Chemistry Research, 56 (43). pp. 12326-12336. ISSN 0888-5885 (Print), 1520-5045 (Online) (doi:https://doi.org/10.1021/acs.iecr.7b02241)

Salehi Kahrizsangi, Hamid, Barletta, Diego, Poletto, Massimo, Schutz, Denis and Romirer, Richard (2017) On the use of a powder rheometer to characterize the powder flowability at low consolidation with torque resistances. AIChE Journal, 63 (11). pp. 4788-4798. ISSN 0001-1541 (Print), 1547-5905 (Online) (doi:https://doi.org/10.1002/aic.15934)

Salehi, Hamid, Barletta, Diego and Poletto, Massimo (2017) A comparison between powder flow property testers. Particuology, 32. pp. 10-20. ISSN 1674-2001 (doi:https://doi.org/10.1016/j.partic.2016.08.003)

Salehi Kahrizsangi, Hamid, Barletta, Diego and Poletto, Massimo (2016) Mechanical properties of agglomerates produced by the mechanical vibration of cohesive powders. KONA Powder and Particle Journal, 33. pp. 287-295. ISSN 0288-4534 (Print), 2187-5537 (Online) (doi:https://doi.org/10.14356/kona.2016011)

Conference Proceedings

Salehi Kahrizsangi, Hamid, Sofia, Daniele, Barletta, Diego, Poletto, Massimo and Larsson, Sylvia (2018) Experimental and simulation investigation on arching behaviour of two biomass materials from a wedge shape hopper. In: 8th World Congress on Particle Technology proceedings. AIChE. ISBN 978-0816911059