CA modelling; frequency domain analysis; segregation; methodology; storage; sampling

Dissanayake Mudiyanselage, Susantha ORCID: 0000-0002-0953-379X , Bradley, Michael, Zigan, Stefan, Salehi Kahrizsangi, Hamid ORCID: 0000-0002-2516-6619 and Deng, Tong ORCID: 0000-0003-4117-4317 (2023) Frequency domain analysis to identify main segregation contributors in a chain of material handling. In: ICBMH2023: 14th International Conference on Bulk Materials Storage, Handling and Transportation. ICBMH - The Institution of Engineers, Wollongong, NSW Australia, pp. 372-380. ISBN 978-1925627831

Charge measurement; Electrostatic charging

Hussain, Tariq, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael Samuel, Armour-Chélu, David, Gorman, Terry and Kaialy, Waseem (2016) Evaluation studies of a sensing technique for electrostatic charge polarity of pharmaceutical particulates. IET Science Measurement and Technology, 10 (5). pp. 442-448. ISSN 1751-8822 (Print), 1751-8830 (Online) (doi:https://doi.org/10.1049/iet-smt.2015.0194)

Erosive wear; High strain rate; Mechanical properties; Microstructures; Polymer Composites

Lakshman, Biju, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A., Okereke, Michael ORCID: 0000-0002-2104-012X and McIlhagger, A. T. (2014) Erosive wear of polymer composite materials and its correlation with high strain rate mechanical properties. In: 2nd International Conference on Abrasive Processes - ICAP 2014 (Programme and Abstract Book). ICAP, Cambridge, United Kingdom, p. 24.

PM2.5 concentration prediction; Local model; Classification and regression tree (CART); Extreme learning machine (ELM); Ensemble model

Shang, Zhigen, Deng, Tong ORCID: 0000-0003-4117-4317 , He, Jianqiang and Duan, Xiaohui (2018) A novel model for hourly PM2.5 concentration prediction based on CART and EELM. Science of The Total Environment, 651 (2). pp. 3043-3052. ISSN 0048-9697 (Print), 1879-1026 (Online) (doi:https://doi.org/10.1016/j.scitotenv.2018.10.193)

Pneumatic conveying characteristics; Particulate materials; Size influence; Modes of flow

Deng, Tong ORCID: 0000-0003-4117-4317 and Bradley, Michael (2016) Determination of a particle size distribution criterion for predicting dense phase pneumatic conveying behaviour of granular and powder materials. Powder Technology, 304. pp. 32-40. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2016.05.001)

Polymer–matrix composites, Electrical properties, Carbon nanotubes, Erosive wear,

Chen, Jinhu, Trevarthen, James A., Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S.A., Rahatekar, Sameer S. and Koziol, Krzysztof K.K. (2014) Aligned carbon nanotube reinforced high performance polymer composites with low erosive wear. Composites Part A: Applied Science and Manufacturing, 67. pp. 86-95. ISSN 1359-835X (doi:https://doi.org/10.1016/j.compositesa.2014.08.009)

Powder flowability, particle properties, bond number, cohesive powders, prediction model

Garg, Vivek ORCID: 0000-0002-8515-4759 , Deng, Tong ORCID: 0000-0003-4117-4317 and Bradley, Michael (2021) A new method for assessing powder flowability based on physical properties and cohesiveness of particles using a small quantity of samples. Powder Technology. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.10.027)

Wood Pellets, Attrition, Dusts, Humidity influence, Physical properties

Deng, Tong ORCID: 0000-0003-4117-4317 , Alzahrani, Abdullah M. and Bradley, Michael S. (2018) Influences of environmental humidity on physical properties and attrition of wood pellets. Fuel Processing Technology, 185. pp. 126-138. ISSN 0378-3820 (doi:https://doi.org/10.1016/j.fuproc.2018.12.010)

additive manufacturing; size and shape segregation; packing fraction; powder spreading

Salehi Kahrizsangi, Hamid ORCID: 0000-0002-2516-6619 , Cummins, John, Gallino, Enrico, Garg, Vivek ORCID: 0000-0002-8515-4759 , Deng, Tong ORCID: 0000-0003-4117-4317 , Hassanpour, Ali and Bradley, Michael (2023) Optimising spread-layer quality in powder additive manufacturing: assessing packing fraction and segregation tendency. Processes, 11 (8):2276. pp. 1-22. ISSN 2227-9717 (Online) (doi:https://doi.org/10.3390/pr11082276)

air induced segregation, pharmaceutical powders, flow functions

Deng, Tong ORCID: 0000-0003-4117-4317 , Paul, Kirsty A., Bradley, Michael S.A., Immins, Lee, Preston, Chris, Scott, Jerry F. and Welfare, Eloise H. (2010) Investigations on air induced segregation of pharmaceutical powders and effect of material flow functions. Powder Technology, 203 (2). pp. 354-358. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2010.05.028)

air velocities, cost-effective protection, dense phase, direct functions, in-pipe, latest technology, particle velocities, pipe bend, pipe walls, pipeline wear, shape and size, wear protection, air, cost effectiveness, mechanical properties, pipeline bends, pipe joints

Bradley, M., Farnish, R. and Deng, T. ORCID: 0000-0003-4117-4317 (2012) Predicting and preventing wear in pipe bends: Basic information for choosing a cost-effective wear protection solution. Bulk Solids Handling, 32 (4). pp. 26-31. ISSN 0173-9980

bend wear, pneumatic conveyor, centrifugal erosion tester, erosion

Deng, T. ORCID: 0000-0003-4117-4317 , Li, J., Chaudhry, A.R., Patel, M., Hutchings, I. and Bradley, M.S.A. (2004) Comparison between weight loss of bends in a pneumatic conveyor and erosion rate obtained in a centrifugal erosion tester for the same materials. Wear, 258 (1-4). pp. 402-411. ISSN 0043-1648 (doi:https://doi.org/10.1016/j.wear.2004.02.012)

bend wear, puncture point, bend orientation, pneumatic conveyor

Deng, T. ORCID: 0000-0003-4117-4317 , Patel, M., Hutchings, I. and Bradley, M.S.A. (2004) Effect of bend orientation on life and puncture point location due to solid particle erosion of a high concentration flow in pneumatic conveyors. Wear, 258 (1-4). pp. 426-433. ISSN 0043-1648 (doi:https://doi.org/10.1016/j.wear.2004.02.010)

biomass, bioenergy, biomass pelletization, biomass co-firing

Deng, T. ORCID: 0000-0003-4117-4317 , Su, J.W., Zhang, Y., Bradley, M.S.A. and Wei, X.L. (2011) Making coal/biomass pellets for co-firing - a review and pioneer work. In: Proceedings of the Bioten Conference on Biomass Bioenergy and Biofuels 2010. CPL Press, Newbury, UK. ISBN 9781872691541

breakage matrices, high-speed impacts, particle degradation, pneumatic conveyors

Deng, Tong ORCID: 0000-0003-4117-4317 , Farnish, Richard J. and Bradley, Michael S.A. (2008) Evaluation of particle degradation due to high-speed impacts in a pneumatic handling system. Particulate Science and Technology, 26 (5). pp. 438-450. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:https://doi.org/10.1080/02726350802367522)

carbon nanotubes, polymer composites, erosion

Chen, Jinhu, Hutchings, Ian M., Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A. and Koziol, Krzysztof K. K. (2014) The effect of carbon nanotube orientation on erosive wear resistance of CNT-epoxy based composites. Carbon, 73. pp. 421-431. ISSN 0008-6223 (doi:https://doi.org/10.1016/j.carbon.2014.02.083)

carbon steel, impact testing, particles, particulate matter, wear of materials, interparticulate collision, rotating disc accelerator erosion testers, target orientation, erosion, rotating disc, wear testing,

Burnett, A.J., Bradley, M.S.A., O'Flynn, D.J., Deng, T. ORCID: 0000-0003-4117-4317 and Bingley, M. (1999) Anomalies in the results obtained from rotating disc accelerator erosion testers: a discussion of possible causes. Wear, 233-5. pp. 275-283. ISSN 0043-1648 (doi:https://doi.org/10.1016/s0043-1648(99)00227-6)

degradation assessments; fines contents; pneumatic conveying; particle impact velocity; wood pellets; roasted coffee beans

Singh, Gulab, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael and Ellis, Richard (2023) Advanced assessment of biomass materials degradation in pneumatic conveying systems: challenges and applications. Applied Sciences, 13:1960. pp. 1-13. ISSN 2076-3417 (Online) (doi:https://doi.org/10.3390/app13031960)

electrostatic charge, powder blending, inductive sensor, bipolar charge, particulate material

Hussain, Tariq, Kaialy, Waseem, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Mike S.A., Nokhodchi, Ali and Armour-Chélu, David (2012) A novel sensing technique for measurement of magnitude and polarity of electrostatic charge distribution across individual particles. International Journal of Pharmaceutics, 441 (1-2). pp. 781-789. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2012.10.002)

electrostatic charge, powder, blending, inductive sensor, bipolar charge, particulate material

Hussain, Tariq, Kaialy, Waseem, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Mike S.A., Nokhodchi, Ali and Armour-Chélu, David (2012) Measurement of electrostatic charge on particles using a novel approach. International Journal of Pharmaceutics, 441 (1-2). pp. 781-789. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2012.10.002)

electrostatic charge; inductive sensor; signal restoration; baseline tracking; dynamic time warping

Jiang, Yang, Deng, Tong ORCID: 0000-0003-4117-4317 and Nasr, Karim ORCID: 0000-0002-8604-6274 (2022) Baseline tracking in bipolar charge signal process by dynamic time warping algorithm. IEEE Sensors Journal, 23 (5). 4540 -4547. ISSN 1530-437X (Print), 1558-1748 (Online) (doi:https://doi.org/10.1109/JSEN.2022.3162494)

electrostatic charging; fine powders; charge hazards; material handling process; inductive charge sensor; charge levels; charge polarity

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael (2023) Electrostatic charging of fine powders and assessment of charge polarity using an inductive charge sensor. Nanomanufacturing, 3 (3). pp. 281-292. ISSN 2673-687X (Online) (doi:https://doi.org/10.3390/nanomanufacturing3030018)

electrostatic inductive sensor; noise reduction; charge signal; wavelet transform

Hussain, Tariq, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael, Armour-Chelu, David, Pillai, John, Saadat, Salman and Kaialy, Waseem (2023) Noise reduction by using wavelet transform in charge signal acquired from an electrostatic inductive sensor. Measurement: Sensors, 27:100757. pp. 1-4. ISSN 2665-9174 (Online) (doi:https://doi.org/10.1016/j.measen.2023.100757)

electrostatic, charge of solids

Deng, Tong ORCID: 0000-0003-4117-4317 and Hussain, Tariq (2013) Taking charge. Solids & Bulk Handling. pp. 10-12.

erosion testers, particle dynamics, centrifugal tester, gas-blast tester

Deng, Tong ORCID: 0000-0003-4117-4317 , Bingley, Mark S. and Bradley, Mike S.A. (2009) Understanding particle dynamics in erosion testers: a review of influences of particle movement on erosion test conditions. Wear, 267 (11). pp. 2132-2140. ISSN 0043-1648 (doi:https://doi.org/10.1016/j.wear.2009.02.020)

erosion, mathematical modelling, pneumatic conveyors, CFD pipe bends, lifetime prediction, computational fluid dynamics

Hanson, R., Allsopp, D., Deng, T. ORCID: 0000-0003-4117-4317 , Smith, D., Bradley, M.S.A., Hutchings, I.M. and Patel, M.K. (2002) A model to predict the life of pneumatic conveyor bends. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 216 (3). pp. 143-149. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:https://doi.org/10.1243/095440802320225284)

erosion, particle spin, modelling, metal target,

Deng, Tong ORCID: 0000-0003-4117-4317 , Bingley, Mark S. and Bradley, Michael S. A. (2004) The influence of particle rotation on the solid particle erosion rate of metals. Wear, 256 (11-12). pp. 1037-1049. ISSN 0043-1648 (doi:https://doi.org/10.1016/S0043-1648(03)00536-2)

erosive wear; carbon-fibre-reinforced polymer (CFRP); carbon fibre structures; architectural topology; solids particle impacts

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael (2024) Erosive wear of structured Carbon-fibre-reinforced textile polymer composites under sands blasting. Lubricants, 12 (3):94. pp. 1-13. ISSN 2075-4442 (Online) (doi:https://doi.org/10.3390/lubricants12030094)

flow function, cement flowability, Brookfield powder flow tester, time consolidation,

Cai, Guohua, Berry, Robert and Deng, Tong ORCID: 0000-0003-4117-4317 (2016) Analysis on flowability of cement based on powder flow tester. China Powder Science and Technology, 22 (1):120. pp. 97-100. ISSN 1008-5548 (doi:https://doi.org/10.13732/j.issn.1008-5548.2016.01.023)

flow rate, hydrated lime, industrial applications, pipelines, pneumatic conveyors, air velocity, dense phase conveying, pneumatic conveying pipelines, pressure drop

Deng, T. ORCID: 0000-0003-4117-4317 , Farnish, R.J. and Bradley, M.S.A. (2007) Pressure drop in dense phase conveying. Bulk Solids Handling, 27 (5). pp. 296-301. ISSN 0173-9980

flowability; pharmaceutical powders; cohesiveness and bond; number; shear cell tests; small quantity of samples

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Diaz, Laura Pereira, Markl, Daniel, Brown, Cameron, Florence, Alastair and Bradley, Michael S.A. (2022) Comparative studies of powder flow predictions using milligrams of powder for identifying powder flow issues. International Journal of Pharmaceutics, 628:122309. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2022.122309)

gas-blast erosion tester, centrifugal-accelerator erosion tester, solid particle erosion, particle dynamics, modelling

Deng, T. ORCID: 0000-0003-4117-4317 , Bingley, M.S., Bradley, M.S.A. and De Silva, S.R. (2008) A comparison of the gas-blast and centrifugal-accelerator erosion testers: The influence of particle dynamics. Wear, 265 (7-8). pp. 945-955. ISSN 0043-1648 (doi:https://doi.org/10.1016/j.wear.2008.02.017)

inverse design, design criteria, profile extrusion dies, FEM-CFD, polyflow

Zhang, Guangdong ORCID: 0000-0003-0285-6745 , Huang, Xiang, Li, Shuanggao, Xia, Chao and Deng, Tong ORCID: 0000-0003-4117-4317 (2020) Improved inverse design method for thin-wall hollow profiled polymer extrusion die based on FEM-CFD simulations. The International Journal of Advanced Manufacturing Technology, 106 (7-8). pp. 2909-2919. ISSN 0268-3768 (Print), 1433-3015 (Online) (doi:https://doi.org/10.1007/s00170-019-04785-w)

particle adhesion, bond number, cohesive powders, surface energy tester

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael S.A. (2021) A study of particle adhesion for cohesive powders using a novel mechanical surface energy tester. Powder Technology, 391. pp. 46-56. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.06.002)

particle breakage; comminution; pneumatic conveying; wood pellets; biomass

Singh, Gulab, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael and Ellis, Richard (2023) Evaluation and calibration of wood pellets degradation using a rotary impact tester against single-bend attrition tester. In: 14th International Conference on Bulk Materials Storage, Handling and Transportation, 11th - 13th July 2023, Wollongong, New South Wales, Australia.

particle concentration, bend wear, shielding effect, empirical model

Deng, T. ORCID: 0000-0003-4117-4317 , Chaudhry, A.R., Patel, M., Hutchings, I. and Bradley, M.S.A. (2004) Effect of particle concentration on erosion rate of mild steel bends in a pneumatic conveyor. Wear, 258 (1-4). pp. 480-487. ISSN 0043-1648 (doi:https://doi.org/10.1016/j.wear.2004.08.001)

particle size, bend erosion, pneumatic conveyors, density and concentrations, erosive wear, shielding effect, empirical model

Macchini, R., Bradley, M.S.A. and Deng, T. ORCID: 0000-0003-4117-4317 (2013) Influence of particle size, density, particle concentration on bend erosive wear in pneumatic conveyors. Wear, 303 (1-2). pp. 21-29. ISSN 0043-1648 (doi:https://doi.org/10.1016/j.wear.2013.02.014)

particulate clay, granulated clay,

Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A., Berry, Rob and Kostuch, J. (2008) Caking strength of granulated clay under frozen conditions. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 604-609. ISBN 9788272062896

plastic caking, caking strength, new caking tester, statistical analysis

Salehi, Hamid ORCID: 0000-0002-2516-6619 , Berry, Robert, Deng, Tong ORCID: 0000-0003-4117-4317 , Larsson, Sylvia H., Farnish, Richard and Bradley, Mike (2019) Development and application of a novel cake strength tester. Powder Technology, 350. pp. 36-42. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2019.03.024)

polymer extrusion die, optimized design method, dimensional tolerance, NURBS, response surface methodology

Zhang, Guangdong, Huang, Xiang, Li, Shuanggao and Deng, Tong ORCID: 0000-0003-4117-4317 (2019) Optimized design method for profile extrusion die based on NURBS modeling. Fibers and Polymers, 20 (8). pp. 1733-1741. ISSN 1229-9197 (Print), 1875-0052 (Online) (doi:https://doi.org/10.1007/s12221-019-1168-y)

predicting, preventing wear, pneumatic conveying systems

Bradley, Michael, Farnish, Richard and Deng, Tong ORCID: 0000-0003-4117-4317 (2011) Predicting and preventing wear in pneumatic conveying systems. In: BulkSolids India 2011, 6-8 April 2011, Mumbai, India. (Unpublished)

rolling segregation, particle shape, sphericity, sphericity ratio, angle of repose

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Salehi, Hamid ORCID: 0000-0002-2516-6619 and Bradley, Michael S. A. (2020) An experimental study on free-surface rolling segregation and correlations with angle of repose and particle sphericity. Powder Technology, 379. pp. 307-320. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2020.10.077)

segregations in process; formulated powders; bench-scale testers; linear regression model; direct compression process

Deng, Tong ORCID: 0000-0003-4117-4317 , Massaro Sousa, Lucas ORCID: 0000-0002-4182-9347 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael S.A. (2023) Segregation of formulated powders in direct compression process and evaluations by small bench-scale testers. International Journal of Pharmaceutics, 647:123544. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2023.123544)

surface segregation, segregation index, particle size, particle adhesion

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Salehi, Hamid ORCID: 0000-0002-2516-6619 and Bradley, Michael S. A. (2021) Correlations between segregation intensity and material properties such as particle sizes and adhesions and novel methods for assessment. Powder Technology, 387. pp. 215-226. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.04.023)