Skip navigation

Items where Greenwich Author is "Deng, Dr Tong"

Items where Greenwich Author is "Deng, Dr Tong"

Up a level
Export as [feed] RSS
Group by: Item Type | Date | Funders | Uncontrolled Keywords | No Grouping
Number of items: 27.

Article

Deng, Tong ORCID: 0000-0003-4117-4317, Alzahrani, Abdullah M. and Bradley, Michael S. (2018) Influences of environmental humidity on physical properties and attrition of wood pellets. Fuel Processing Technology, 185. pp. 126-138. ISSN 0378-3820 (doi:https://doi.org/10.1016/j.fuproc.2018.12.010)

Shang, Zhigen, Deng, Tong ORCID: 0000-0003-4117-4317, He, Jianqiang and Duan, Xiaohui (2018) A novel model for hourly PM2.5 concentration prediction based on CART and EELM. Science of The Total Environment, 651 (2). pp. 3043-3052. ISSN 0048-9697 (Print), 1879-1026 (Online) (doi:https://doi.org/10.1016/j.scitotenv.2018.10.193)

Deng, Tong ORCID: 0000-0003-4117-4317 and Bradley, Michael (2016) Determination of a particle size distribution criterion for predicting dense phase pneumatic conveying behaviour of granular and powder materials. Powder Technology, 304. pp. 32-40. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2016.05.001)

Hussain, Tariq, Deng, Tong ORCID: 0000-0003-4117-4317, Bradley, Michael, Armour-Chelu, David, Gorman, Terry and Kaialy, Waseem (2016) Evaluation studies of a sensing technique for electrostatic charge polarity of pharmaceutical particulates. IET Science Measurement and Technology. ISSN 1751-8822 (Print), 1751-8830 (Online) (doi:https://doi.org/10.1049/iet-smt.2015.0194)

Cai, Guohua, Berry, Robert and Deng, Tong ORCID: 0000-0003-4117-4317 (2016) Analysis on flowability of cement based on powder flow tester. China Powder Science and Technology, 22 (1):120. pp. 97-100. ISSN 1008-5548 (doi:https://doi.org/10.13732/j.issn.1008-5548.2016.01.023)

Chen, Jinhu, Trevarthen, James A., Deng, Tong ORCID: 0000-0003-4117-4317, Bradley, Michael S.A., Rahatekar, Sameer S. and Koziol, Krzysztof K.K. (2014) Aligned carbon nanotube reinforced high performance polymer composites with low erosive wear. Composites Part A: Applied Science and Manufacturing, 67. pp. 86-95. ISSN 1359-835X (doi:https://doi.org/10.1016/j.compositesa.2014.08.009)

Chen, Jinhu, Hutchings, Ian M., Deng, Tong ORCID: 0000-0003-4117-4317, Bradley, Michael S. A. and Koziol, Krzysztof K. K. (2014) The effect of carbon nanotube orientation on erosive wear resistance of CNT-epoxy based composites. Carbon, 73. pp. 421-431. ISSN 0008-6223 (doi:https://doi.org/10.1016/j.carbon.2014.02.083)

Deng, Tong ORCID: 0000-0003-4117-4317 and Hussain, Tariq (2013) Taking charge. Solids & Bulk Handling. pp. 10-12.

Macchini, R., Bradley, M.S.A. and Deng, T. ORCID: 0000-0003-4117-4317 (2013) Influence of particle size, density, particle concentration on bend erosive wear in pneumatic conveyors. Wear, 303 (1-2). pp. 21-29. ISSN 0043-1648 (doi:https://doi.org/10.1016/j.wear.2013.02.014)

Hussain, Tariq, Kaialy, Waseem, Deng, Tong ORCID: 0000-0003-4117-4317, Bradley, Mike S.A., Nokhodchi, Ali and Armour-Chélu, David (2012) Measurement of electrostatic charge on particles using a novel approach. International Journal of Pharmaceutics, 441 (1-2). pp. 781-789. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2012.10.002)

Hussain, Tariq, Kaialy, Waseem, Deng, Tong ORCID: 0000-0003-4117-4317, Bradley, Mike S.A., Nokhodchi, Ali and Armour-Chélu, David (2012) A novel sensing technique for measurement of magnitude and polarity of electrostatic charge distribution across individual particles. International Journal of Pharmaceutics, 441 (1-2). pp. 781-789. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2012.10.002)

Bradley, M., Farnish, R. and Deng, T. ORCID: 0000-0003-4117-4317 (2012) Predicting and preventing wear in pipe bends: Basic information for choosing a cost-effective wear protection solution. Bulk Solids Handling, 32 (4). pp. 26-31. ISSN 0173-9980

Deng, Tong ORCID: 0000-0003-4117-4317, Paul, Kirsty A., Bradley, Michael S.A., Immins, Lee, Preston, Chris, Scott, Jerry F. and Welfare, Eloise H. (2010) Investigations on air induced segregation of pharmaceutical powders and effect of material flow functions. Powder Technology, 203 (2). pp. 354-358. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2010.05.028)

Deng, Tong ORCID: 0000-0003-4117-4317, Bingley, Mark S. and Bradley, Mike S.A. (2009) Understanding particle dynamics in erosion testers: a review of influences of particle movement on erosion test conditions. Wear, 267 (11). pp. 2132-2140. ISSN 0043-1648 (doi:https://doi.org/10.1016/j.wear.2009.02.020)

Deng, Tong ORCID: 0000-0003-4117-4317, Farnish, Richard J. and Bradley, Michael S.A. (2008) Evaluation of particle degradation due to high-speed impacts in a pneumatic handling system. Particulate Science and Technology, 26 (5). pp. 438-450. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:https://doi.org/10.1080/02726350802367522)

Deng, T. ORCID: 0000-0003-4117-4317, Bingley, M.S., Bradley, M.S.A. and De Silva, S.R. (2008) A comparison of the gas-blast and centrifugal-accelerator erosion testers: The influence of particle dynamics. Wear, 265 (7-8). pp. 945-955. ISSN 0043-1648 (doi:https://doi.org/10.1016/j.wear.2008.02.017)

Deng, T. ORCID: 0000-0003-4117-4317, Farnish, R.J. and Bradley, M.S.A. (2007) Pressure drop in dense phase conveying. Bulk Solids Handling, 27 (5). pp. 296-301. ISSN 0173-9980

Deng, T. ORCID: 0000-0003-4117-4317, Chaudhry, A.R., Patel, M., Hutchings, I. and Bradley, M.S.A. (2004) Effect of particle concentration on erosion rate of mild steel bends in a pneumatic conveyor. Wear, 258 (1-4). pp. 480-487. ISSN 0043-1648 (doi:https://doi.org/10.1016/j.wear.2004.08.001)

Deng, T. ORCID: 0000-0003-4117-4317, Li, J., Chaudhry, A.R., Patel, M., Hutchings, I. and Bradley, M.S.A. (2004) Comparison between weight loss of bends in a pneumatic conveyor and erosion rate obtained in a centrifugal erosion tester for the same materials. Wear, 258 (1-4). pp. 402-411. ISSN 0043-1648 (doi:https://doi.org/10.1016/j.wear.2004.02.012)

Deng, T. ORCID: 0000-0003-4117-4317, Patel, M., Hutchings, I. and Bradley, M.S.A. (2004) Effect of bend orientation on life and puncture point location due to solid particle erosion of a high concentration flow in pneumatic conveyors. Wear, 258 (1-4). pp. 426-433. ISSN 0043-1648 (doi:https://doi.org/10.1016/j.wear.2004.02.010)

Deng, Tong ORCID: 0000-0003-4117-4317, Bingley, Mark S. and Bradley, Michael S. A. (2004) The influence of particle rotation on the solid particle erosion rate of metals. Wear, 256 (11-12). pp. 1037-1049. ISSN 0043-1648 (doi:https://doi.org/10.1016/S0043-1648(03)00536-2)

Hanson, R., Allsopp, D., Deng, T. ORCID: 0000-0003-4117-4317, Smith, D., Bradley, M.S.A., Hutchings, I.M. and Patel, M.K. (2002) A model to predict the life of pneumatic conveyor bends. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 216 (3). pp. 143-149. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:https://doi.org/10.1243/095440802320225284)

Burnett, A.J., Bradley, M.S.A., O'Flynn, D.J., Deng, T. ORCID: 0000-0003-4117-4317 and Bingley, M. (1999) Anomalies in the results obtained from rotating disc accelerator erosion testers: a discussion of possible causes. Wear, 233-5. pp. 275-283. ISSN 0043-1648 (doi:https://doi.org/10.1016/s0043-1648(99)00227-6)

Book Section

Deng, Tong ORCID: 0000-0003-4117-4317, Bradley, Michael S. A., Berry, Rob and Kostuch, J. (2008) Caking strength of granulated clay under frozen conditions. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 604-609. ISBN 9788272062896

Conference Proceedings

Lakshman, Biju, Deng, Tong ORCID: 0000-0003-4117-4317, Bradley, Michael S. A., Okereke, Michael ORCID: 0000-0002-2104-012X and McIlhagger, A. T. (2014) Erosive wear of polymer composite materials and its correlation with high strain rate mechanical properties. In: 2nd International Conference on Abrasive Processes - ICAP 2014 (Programme and Abstract Book). ICAP, Cambridge, United Kingdom, p. 24.

Deng, T. ORCID: 0000-0003-4117-4317, Su, J.W., Zhang, Y., Bradley, M.S.A. and Wei, X.L. (2011) Making coal/biomass pellets for co-firing - a review and pioneer work. In: Proceedings of the Bioten Conference on Biomass Bioenergy and Biofuels 2010. CPL Press, Newbury, UK. ISBN 9781872691541

Conference or Conference Paper

Bradley, Michael, Farnish, Richard and Deng, Tong ORCID: 0000-0003-4117-4317 (2011) Predicting and preventing wear in pneumatic conveying systems. In: BulkSolids India 2011, 6-8 April 2011, Mumbai, India. (Unpublished)

This list was generated on Sat Mar 23 09:13:24 2019 UTC.