Skip navigation

Items where Greenwich Author is "Chen, Professor Hua-Peng"

Items where Greenwich Author is "Chen, Professor Hua-Peng"

Up a level
Export as [feed] RSS
Group by: Item Type | Date | Funders | Uncontrolled Keywords | No Grouping
Jump to: Corrosion, Concrete, Cracking, Bonding strength | Deep geothermal reservoir; Human-controlled parameters; Naturally-occurring parameters; Finite element modelling; Factorial experimental design | Excitation; propagation; ultrasonic guided waves; pipes; piezoelectric transducer arrays | Geothermal energy extraction; Coupled thermo-hydraulic; Discrete fracture; Finite element method; Parameters analyses | Geothermal reservoirs, Numerical modelling, Pore media | Probability of failure; Flexible pipes; Hasofer-Lind and Rackwitz-Fiessler algorithm; Monte Carlo simulation; Deflection; Buckling; Wall thrust; Bending stress | Risk and cost optimization, Probability of failure, Genetic Algorithm, Pipe renewal methods, Life cycle cost, Failure cost, Condition Index | air-gaps, building envelopes, building roof, comparison of materials, conceptual analysis, heat preservation, interior environments, large span, roof structures, structural component, structural function, thermal behaviours, thermal damage, thermal performance, thermal performance of buildings | anisotropic elasticity, composite laminates, frictional contact, interface crack, stress singularity | building envelopes, construction procedures, double layers, experimental studies, heat preservation, induced ventilation, large span roof structures, measured results, Passive ventilation, roof structures, shear connector, small hole, steel tube, thermal performance | buildings, structures, risk assessment, numerical analysis | concrete cracking, optimized maintenance strategy, reinforcement corrosion, stochastic deterioration process, structural performance degradation | constitutive rheological model, extrusion, fresh cement paste or mortar, flow stress, rheology, semi-solid, strain rate, viscoplastic | damage assessment, frame structure, dynamic modal analysis, incomplete noisy measurements, regularization methods | dynamic, vibration, control, structural health monitoring, | dynamics perturbation theory, modelling error, mode shape expansion, model testing | field testing & monitoring, maintenance & inspection, pollution, sewers & drains, assessment | finite element model, incomplete mode shapes, finite element method | mode shape expansion, modelling errors, perturbed force, measurement uncertainty, regularisation algorithm, Canton Tower benchmark problem | mode shape expansion, perturbed force approach | model updating, operational modal analysis, dynamic perturbation method, regularization algorithm, Canton Tower benchmark problem | particle-reinforced composite, representative volume element, (RVE), Neo-Hookean, numerical homogenization, hyperelasticity | perturbation-theory, | radial cracking, thick-walled cylinder, axisymmetrical displacement constraint, bilinear softening curve, | real time structural damage assessment, detection, vibration | reinforcement corrosion, concrete cracking, bond strength, performance deterioration, gamma process, reliability analysis | sea defences, risk & probability analysis, maintenance & inspection | steel column base, shear connector, load-displacement relationship, shear capacities, Timoshenko beam theory, theoretical prediction | stress singularity, frictional interface, crack modelling, composite materials | structural damage, evolution assessment, regularised time step integration method | structural dynamics, experimental condensed models | vibration based structural model, damage identification, bridges | water demand; stochastic nature; probability distribution function; log logistic distribution; Minitab; Anderson Darling
Number of items: 33.

Corrosion, Concrete, Cracking, Bonding strength

Chen, Hua-Peng and Nepal, Jaya (2015) Analytical model for residual bond strength of corroded reinforcement in concrete structures. Journal of Engineering Mechanics. ISSN 0733-9399 (Print), 1943-7889 (Online) (doi:https://doi.org/10.1061/(ASCE)EM.1943-7889.0000997)

Deep geothermal reservoir; Human-controlled parameters; Naturally-occurring parameters; Finite element modelling; Factorial experimental design

Aliyu, Musa D. and Chen, Hua-Peng (2017) Sensitivity analysis of deep geothermal reservoir: effect of reservoir parameters on production temperature. Energy, 129. pp. 101-113. ISSN 0360-5442 (Print), 1873-6785 (Online) (doi:https://doi.org/10.1016/j.energy.2017.04.091)

Excitation; propagation; ultrasonic guided waves; pipes; piezoelectric transducer arrays

Niu, X., Tee, K. F. ORCID: 0000-0003-3202-873X , Chen, H. P. and Marques, H. R. (2018) Excitation and propagation of ultrasonic guided waves in pipes by piezoelectric transducer arrays. Journal of Physics: Conference Series, 1065. ISSN 1742-6588 (Print), 1742-6596 (Online) (doi:https://doi.org/10.1088/1742-6596/1065/22/222006)

Geothermal energy extraction; Coupled thermo-hydraulic; Discrete fracture; Finite element method; Parameters analyses

Aliyu, Musa D. and Chen, Hua-Peng (2017) Optimum control parameters and long-term productivity of geothermal reservoirs using coupled thermo-hydraulic process modelling. Renewable Energy, 112. pp. 151-165. ISSN 0960-1481 (Print), 1879-0682 (Online) (doi:https://doi.org/10.1016/j.renene.2017.05.032)

Geothermal reservoirs, Numerical modelling, Pore media

Hills, Colin, Aliyu, Musa, Chen, Hua-Peng and Harireche, Ouahid (2017) Numerical modelling of geothermal reservoirs with multiple pore media. In: Proceedings 41st Workshop on Modelling on Geothermal Reservoir Engineering. SGP-TR-212 . Stanford University.

Probability of failure; Flexible pipes; Hasofer-Lind and Rackwitz-Fiessler algorithm; Monte Carlo simulation; Deflection; Buckling; Wall thrust; Bending stress

Tee, Kong Fah ORCID: 0000-0003-3202-873X , Khan, Lutfor Rahman and Chen, Hua-Peng (2013) Probabilistic failure analysis of underground flexible pipes. Structural Engineering and Mechanics, 47 (2). pp. 167-183. ISSN 1225-4568 (doi:https://doi.org/10.12989/sem.2013.47.2.167)

Risk and cost optimization, Probability of failure, Genetic Algorithm, Pipe renewal methods, Life cycle cost, Failure cost, Condition Index

Tee, Kong Fah ORCID: 0000-0003-3202-873X , Khan, Lutfor Rahman, Chen, Hua-Peng and Alani, Morteza (2014) Reliability based life cycle cost optimization for underground pipeline networks. Tunnelling and Underground Space Technology incorporating Trenchless Technology Research, 43. pp. 32-40. ISSN 0886-7798 (doi:https://doi.org/10.1016/j.tust.2014.04.007)

air-gaps, building envelopes, building roof, comparison of materials, conceptual analysis, heat preservation, interior environments, large span, roof structures, structural component, structural function, thermal behaviours, thermal damage, thermal performance, thermal performance of buildings

Xiao, Nan, Chen, Hua Peng, Sun, Liqiang and Wang, Hai (2011) New open-web roofs for integrating heat preservation & insulation and structural functions. In: 2011 International Conference on Multimedia Technology, ICMT 2011. IEEE Computer Society, Piscataway, USA, pp. 1123-1126. ISBN 9781612847719 (doi:https://doi.org/10.1109/ICMT.2011.6002873)

anisotropic elasticity, composite laminates, frictional contact, interface crack, stress singularity

Chen, Hua-Peng, Guo, Z. and Zhou, X. (2012) Stress singularities of contact problems with a frictional interface in anisotropic bimaterials. Fatigue & Fracture of Engineering Materials & Structures, 35 (8). pp. 718-731. ISSN 8756-758X (Print), 1460-2695 (Online) (doi:https://doi.org/10.1111/j.1460-2695.2011.01642.x)

building envelopes, construction procedures, double layers, experimental studies, heat preservation, induced ventilation, large span roof structures, measured results, Passive ventilation, roof structures, shear connector, small hole, steel tube, thermal performance

Xiao, Nan, Chen, Hua Peng, Sun, Liqiang and Wang, Xiang (2011) Experimental study on thermal performance of improved open-web roofs with induced ventilation. In: 2011 International Conference on Multimedia Technology, ICMT 2011. IEEE Computer Society, Piscataway, USA, 6398 -6401. ISBN 9781612847719 (doi:https://doi.org/10.1109/ICMT.2011.6002740)

buildings, structures, risk assessment, numerical analysis

Chen, Hua-Peng and Bicanic, Nenad (2010) Identification of structural damage in buildings using iterative procedure and regularisation method. Engineering Computations, 27 (8). pp. 930-950. ISSN 0264-4401 (doi:https://doi.org/10.1108/02644401011082962)

concrete cracking, optimized maintenance strategy, reinforcement corrosion, stochastic deterioration process, structural performance degradation

Chen, Hua-Peng and Alani, Amir M. (2013) Optimized maintenance strategy for concrete structures affected by cracking due to reinforcement corrosion. ACI Structural Journal, 110 (2). pp. 229-238. ISSN 0889-3241

constitutive rheological model, extrusion, fresh cement paste or mortar, flow stress, rheology, semi-solid, strain rate, viscoplastic

Zhou, Xiangming, Li, Zongjin, Fan, Mizi and Chen, HuaPeng (2013) Rheology of semi-solid fresh cement pastes and mortars in orifice extrusion. Cement and Concrete Composites, 37. pp. 304-311. ISSN 0958-9465 (doi:https://doi.org/10.1016/j.cemconcomp.2013.01.004)

damage assessment, frame structure, dynamic modal analysis, incomplete noisy measurements, regularization methods

Chen, Hua-Peng (2008) Application of regularization methods to damage detection in large scale plane frame structures using incomplete noisy modal data. Engineering Structures, 30 (11). 3219 - 3227. ISSN 0141-0296 (doi:https://doi.org/10.1016/j.engstruct.2008.04.038)

dynamic, vibration, control, structural health monitoring,

Chen, Hua-Peng, Wang, Ke-Lai and Tee, Kong Fah ORCID: 0000-0003-3202-873X (2010) Structural health monitoring utilizing dynamic perturbation method. In: 3rd International Conference on Dynamics, Vibration and Control (ICDVC), 12-14 May 2010, Hangzhou, China.

dynamics perturbation theory, modelling error, mode shape expansion, model testing

Chen, Hua-Peng (2008) Mode shape expansion using perturbed force vector approach. In: Sixteenth UK Conference of the Association of Computational Mechanics in Engineering (ACME UK), 1-2 Apr 2008, Newcastle upon Tyne, UK. (Unpublished)

field testing & monitoring, maintenance & inspection, pollution, sewers & drains, assessment

Chen, H. P., Stevenson, M. W. and Li, C.-Q. (2008) Assessment of existing soakaways for reuse. Proceedings of the Institution of Civil Engineers-Water Management, 161 (3). pp. 141-149. ISSN 1741-7589 (doi:https://doi.org/10.1680/wama.2008.161.3.141)

finite element model, incomplete mode shapes, finite element method

Chen, Hua-Peng and Maung, Than Soe (2014) Regularised finite element model updating using measured incomplete modal data. Journal of Sound and Vibration, 333 (21). pp. 5566-5582. ISSN 0022-460X (doi:https://doi.org/10.1016/j.jsv.2014.05.051)

mode shape expansion, modelling errors, perturbed force, measurement uncertainty, regularisation algorithm, Canton Tower benchmark problem

Chen, Hua-Peng, Tee, Kong Fah ORCID: 0000-0003-3202-873X and Ni, Yi-Qing (2012) Mode shape expansion with consideration of analytical modelling errors and modal measurement uncertainty. Smart Structures and Systems, 10 (4-5). pp. 485-499. ISSN 1738-1584 (Print), 1738-1991 (Online)

mode shape expansion, perturbed force approach

Chen, Hua Peng (2009) Mode shape expansion using perturbed force approach. Journal of Sound and Vibration, 329 (8). pp. 1177-1190. ISSN 0022-460X (doi:https://doi.org/10.1016/j.jsv.2009.10.027)

model updating, operational modal analysis, dynamic perturbation method, regularization algorithm, Canton Tower benchmark problem

Chen, Hua Peng and Huang, Tian-Li (2012) Updating finite element model using dynamic perturbation method and regularization algorithm. Smart Structures and Systems, 10 (4-5). pp. 427-442. ISSN 1738-1584 (Print), 1738-1991 (Online) (doi:https://doi.org/10.12989/sss.2012.10.4_5.427)

particle-reinforced composite, representative volume element, (RVE), Neo-Hookean, numerical homogenization, hyperelasticity

Guo, Zaoyang, Shi, Xiaohao, Chen, Yang, Chen, Huapeng, Peng, Xiongqi and Harrison, Philip (2013) Mechanical modeling of incompressible particle-reinforced neo-Hookean composites based on numerical homogenization. Mechanics of Materials, 70. pp. 1-17. ISSN 0167-6636 (doi:https://doi.org/10.1016/j.mechmat.2013.11.004)

perturbation-theory,

Chen, Hua-Peng (2006) Efficient methods for determining modal parameters of dynamic structures with large modifications. Journal of Sound and Vibration, 298 (1-2). pp. 462-470. ISSN 0022-460X (doi:https://doi.org/10.1016/j.jsv.2006.06.002)

radial cracking, thick-walled cylinder, axisymmetrical displacement constraint, bilinear softening curve,

Chen, Hua Peng and Xiao, Nan (2012) Analytical solutions for corrosion-induced cohesive concrete cracking. Journal of Applied Mathematics, 25. pp. 2-25. ISSN 1110-757X (doi:https://doi.org/10.1155/2012/769132)

real time structural damage assessment, detection, vibration

Maung, T.S., Chen, H.-P. and Alani, A.M. (2011) Real time structural damage assessment from vibration measurements. In: 9th International Conference on Damage Assessment of Structures (DAMAS 2011). Journal of Physics: Conference Series, 305 (1). IOP Publishing, Bristol, UK. ISSN 1742-6588 (Print), 1742-6596 (Online) (doi:https://doi.org/10.1088/1742-6596/305/1/012096)

reinforcement corrosion, concrete cracking, bond strength, performance deterioration, gamma process, reliability analysis

Chen, Hua-Peng and Nepal, Jaya (2015) Stochastic modelling and lifecycle performance assessment of bond strength of corroded reinforcement in concrete. Structural Engineering and Mechanics, 54 (2). pp. 319-336. ISSN 1225-4568 (Print), 1598-6217 (Online) (doi:https://doi.org/10.12989/sem.2015.54.2.319)

sea defences, risk & probability analysis, maintenance & inspection

Chen, Hua-Pen and Alani, Amir M. (2012) Reliability and optimised maintenance for sea defences. Proceedings of the ICE - Maritime Engineering, 165 (2). pp. 51-64. ISSN 1741-7597 (Print), 1751-7737 (Online) (doi:https://doi.org/10.1680/maen.2010.37)

steel column base, shear connector, load-displacement relationship, shear capacities, Timoshenko beam theory, theoretical prediction

Xiao, Nan and Chen, Hua Peng (2011) Theoretical prediction on the shear capacities of shear connectors in steel column bases. Advances in Structural Engineering, 14 (5). pp. 953-966. ISSN 1369-4332 (doi:https://doi.org/10.1260/1369-4332.14.5.953)

stress singularity, frictional interface, crack modelling, composite materials

Chen, Hua-Peng (2008) Singular stresses at the tip of a crack terminating at frictional interface of fibre reinforced composites. In: Sixteenth UK Conference of the Association of Computational Mechanics in Engineering (ACME UK), 1-2 Apr 2008, Newcastle upon Tyne, UK. (Unpublished)

structural damage, evolution assessment, regularised time step integration method

Chen, Hua-Peng and Maung, Than Soe (2014) Structural damage evolution assessment using the regularised time step integration method. Journal of Sound and Vibration, 333 (18). pp. 4104-4122. ISSN 0022-460X (doi:https://doi.org/10.1016/j.jsv.2014.04.044)

structural dynamics, experimental condensed models

Tee, Kong-Fah ORCID: 0000-0003-3202-873X and Chen, Hua-Peng (2010) Retrieving full stiffness matrix from experimental condensed models. In: 10th International Conference on Recent Advances in Structural Dynamics, 12-14 July, Southampton, UK. (Unpublished)

vibration based structural model, damage identification, bridges

Chen, H.P. (2014) Vibration based structural model updating and damage identification of bridges. In: Bridge Maintenance, Safety, Management and Life Extension. Proceedings of the 7th International Conference of Bridge Maintenance, Safety and Management, 7–11 July 2014, Shanghai, China. CRC Press / Balkema, Taylor & Francis Group, Leiden, The Netherlands, pp. 499-506. ISBN 978-1-138-00103-9 (doi:https://doi.org/10.1201/b17063-70)

water demand; stochastic nature; probability distribution function; log logistic distribution; Minitab; Anderson Darling

Surendran, Seevali, Tota-Maharaj, Kiran and Chen, Hua-Peng (2016) Validation of log logistic distribution to model water demand using UK and North American data. In: 8th International Perspective on Water Resources and the Environmen, 4th - 6th January, 2016, Colombo, Sri Lanka.

This list was generated on Fri Mar 29 09:12:23 2024 UTC.