Skip navigation

Items where Greenwich Author is "Berry, Robert"

Items where Greenwich Author is "Berry, Robert"

Up a level
Export as [feed] RSS
Group by: Item Type | Date | Funders | Uncontrolled Keywords | No Grouping
Number of items: 42.

Article

Salehi, Hamid, Berry, Robert, Farnish, Richard and Bradley, Mike (2019) Temperature and time consolidation effect on the bulk flow properties and arching tendency of a detergent powder. Chemical Engineering & Technology. ISSN 0930-7516 (Print), 1521-4125 (Online) (In Press) (doi:https://doi.org/10.1002/ceat.201900092)

Salehi, Hamid, Berry, Robert, Farnish, Richard and Bradley, Mike (2019) A new uniaxial compression tester: development and application. Chemical Engineering Transactions, 74. pp. 463-468. ISSN 2283-9216 (doi:https://doi.org/10.3303/CET1974078)

Salehi, Hamid, Berry, Robert, Deng, Tong ORCID: 0000-0003-4117-4317, Larsson, Sylvia H., Farnish, Richard and Bradley, Michael (2019) Development and application of a novel cake strength tester. Powder Technology, 350. pp. 36-42. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2019.03.024)

Salehi Kahrizsangi, Hamid, Berry, Robert, Deng, Tong ORCID: 0000-0003-4117-4317, Larsson, Sylvia, Farnish, Richard and Bradley, Mike (2019) Development and application of a novel cake strength tester. Powder Technology, 350. pp. 36-42. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2019.03.024)

Garg, Vivek, Mallick, S. S., García-Trinanes, Pablo ORCID: 0000-0002-4993-2250 and Berry, Robert James (2018) An investigation into the flowability of fine powders used in pharmaceutical industries. Powder Technology, 336. pp. 375-382. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2018.06.014)

Kotzur, Benjamin A., Berry, Robert J., Zigan, Stefan, García-Triñanes, Pablo ORCID: 0000-0002-4993-2250 and Bradley, Michael S. A. (2018) Particle Attrition Mechanisms, their characterisation, and application to horizontal lean phase pneumatic conveying systems: A review. Powder Technology, 334. pp. 76-105. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2018.04.047)

Kotzur, Benjamin A., Bradley, Michael S.A., Berry, Robert J. and Farnish, Richard J. (2016) Breakage characteristics of granulated food products for prediction of attrition during lean-phase pneumatic conveying. International Journal of Food Engineering, 12 (9). ISSN 1556-3758 (Print), 2194-5764 (Online) (doi:https://doi.org/10.1515/ijfe-2016-0045)

Cai, Guohua, Berry, Robert and Deng, Tong ORCID: 0000-0003-4117-4317 (2016) Analysis on flowability of cement based on powder flow tester. China Powder Science and Technology, 22 (1):120. pp. 97-100. ISSN 1008-5548 (doi:https://doi.org/10.13732/j.issn.1008-5548.2016.01.023)

Barletta, Diego, Berry, Robert J., Larsson, Sylvia H., Lestander, Torbjörn A., Poletto, Massimo and Ramírez-Gómez, Álvaro (2015) Assessment on bulk solids best practice techniques for flow characterization and storage/handling equipment design for biomass materials of different classes. Fuel Processing Technology, 138. pp. 540-554. ISSN 0378-3820 (doi:https://doi.org/10.1016/j.fuproc.2015.06.034)

Falk, Joel, Berry, Robert, Broström, Markus and Larsson, Sylvia H. (2015) Mass flow and variability in screw feeding of biomass powders – relations to particle and bulk properties. Powder Technology, 276. pp. 80-88. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2015.02.023)

Berry, R.J., Bradley, M.S.A. and McGregor, R.G. (2014) Brookfield powder flow tester - Results of round robin tests with CRM-116 limestone powder. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 229 (3). pp. 215-230. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:https://doi.org/10.1177/0954408914525387)

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2011) Testing of powders for sensitivity to air effect segregation. Powder Metallurgy, 54 (4). pp. 468-470. ISSN 0032-5899 (Print), 1743-2901 (Online) (doi:https://doi.org/10.1179/174329011X13073642060730)

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2011) Centrifugal tester versus a novel design to measure particle adhesion strength and investigation of effect of physical characteristics (size, shape, density) of food particles on food surfaces. Journal of Food Engineering, 104 (4). pp. 518-524. ISSN 0260-8774 (doi:https://doi.org/10.1016/j.jfoodeng.2011.01.008)

Ariza-Zafra, K., Berry, R., Bradley, M.S.A. and Santana, J.C. (2010) Achieving mass flow in silos with shallow converging sections using inverted cones. Bulk Solids Handling (Whitepaper). ISSN 0173-9980

Kulkarni, P.A., Berry, R.J. and Bradley, M.S.A. (2010) Review of the flowability measuring techniques for powder metallurgy industry. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 224 (3). pp. 159-168. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:https://doi.org/10.1243/09544089JPME299)

Angulo, O., Berry, R., Bradley, M. and Antonijevic, M. ORCID: 0000-0002-5847-7886 (2009) Modelling of a dosator: an analytical approach based on measured powder flow properties. Journal of Pharmacy and Pharmacology, 61 (S1). A123-A123. ISSN 0022-3573 (Print), 2042-7158 (Online) (doi:https://doi.org/10.1211/002235709789037053)

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2009) Direct measurement of powder flavor adhesion onto crisp surface using a novel adhesion tester. Particulate Science and Technology, 27 (4). pp. 362-372. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:https://doi.org/10.1080/02726350902994035)

Farnish, R.J., Berry, R. and Bradley, M. (2008) Development of a novel - filling technique loading bulk particulate materials into tankers or processes. Bulk Solids Handling, 28 (4). pp. 238-241. ISSN 0173-9980

Bradley, Michael S.A., Berry, Rob and Pillai, John (2007) Comparison between the angles of wall friction measured on an on-line wall friction tester and the Jenike wall friction tester. Powder Technology, 174 (1-2). pp. 64-70. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2006.10.024)

Bradley, M. S. A. and Berry, R. (2007) Investigation of the effect of test procedure factors on the failure loci and derived failure functions obtained from annular shear cells. Powder Technology, 174 (1-2). pp. 60-63. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2006.10.023)

Book Section

Deng, Tong ORCID: 0000-0003-4117-4317, Bradley, Michael S. A., Berry, Rob and Kostuch, J. (2008) Caking strength of granulated clay under frozen conditions. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 604-609. ISBN 9788272062896

Ermis, Ertan, Farnish, Richard J., Berry, Rob and Bradley, Michael S. A. (2008) Direct measurement of powder flavour adhesion on to a food surface using a novel adhesion tester. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 803-810. ISBN 9788272062896

Berry, Rob, Bradley, Michael S.A., Farnish, Richard J. and Angulo Pinzon, O.A. (2008) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 344-350. ISBN 9788272062896

Angulo Pinzon, O.A., Bradley, Michael, Berry, Robert and Farnish, Richard J. (2008) Modelling dosator filling and discharge of powder. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 586-591. ISBN 9788272062896

Ariza-Zafra, K., Berry, Robert and Bradley, Michael S. A. (2008) Review of models for predicting the discharge rates of bulk particulates from silos and bins. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 484-492. ISBN 9788272062896

Bradley, M. S. A., Reed, A. R., Berry, R. and Holmes, C.P.M. (2008) Start-up and running forces on bulk solids feeders: experimental findings versus available models. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 450-457. ISBN 9788272062896

Conference Proceedings

Sparrow, R. D, Adekunle, A. A. and Berry, R. J. (2017) LEOPARD lightweight encryption operation permutation addition rotation and diffusion. In: IEEE 10th International Conferences on Signal Processing and Communication Systems. IEEE, pp. 1-5. ISBN 978-1-5090-0941-1 (doi:https://doi.org/10.1109/ICSPCS.2016.7843322)

Sparrow, R. D, Adekunle, A. A., Berry, R. J. and Farnish, R. J. (2016) A novel block cipher design paradigm for secured communication. In: 2016 Annual IEEE 10th International Systems Conference (SysCon). IEEE, Florida, United States of America, pp. 1-6. ISBN 978-1-4673-9519-9 (doi:https://doi.org/10.1109/SYSCON.2016.7490659)

Sparrow, R. D., Adekunle, A. A., Berry, R. J. and Farnish, R. J. (2016) The affect of two cryptographic constructs on QoS and QoE for unmanned control vehicles. In: 2015 9th International Conference on Next Generation Mobile Applications, Services and Technologies. IEEE, pp. 265-269. ISBN 978-1-4799-8660-6 (doi:https://doi.org/10.1109/NGMAST.2015.46)

Sparrow, R.D., Adekunle, A.A., Berry, R.J. and Farnish, R.J. (2015) Balancing throughput and latency for an aerial robot over a wireless secure communication link. In: 2015 IEEE 2nd International Conference on Cybernetics (CYBCONF). IEEE, pp. 184-189. ISBN 978-1-4799-8320-9 (doi:https://doi.org/10.1109/CYBConf.2015.7175929)

Sparrow, R. D., Adekunle, Andrew, Berry, Robert and Farnish, Richard (2015) Simulating and modelling the impact of secure communication latency for closed loop control. In: Internet Technologies and Applications (ITA), 2015. IEEE, Wrexham, UK, pp. 138-143. ISSN 9781479980369 (doi:https://doi.org/10.1109/ITechA.2015.7317384)

Sparrow, R. D., Adekunle, A. A., Berry, R. J. and Farnish, R. J. (2014) Simulating and modelling the impact of security constructs on latency for open loop control. In: 6th Computer Science and Electronic Engineering Conference (CEEC), 2014. IEEE, Colchester, pp. 85-90. ISBN 9781479966929 (doi:https://doi.org/10.1109/CEEC.2014.6958560)

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2010) Testing of powders for sensitivity to air effect segregation. In: Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Florence, pp. 53-60. ISBN 978-189907219-4

Conference or Conference Paper

Sparrow, R. D., Adekunle, Andrew, Berry, Robert and Farnish, Richard (2015) Study of two security constructs on throughput for wireless sensor multi-hop networks. In: 38th International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO), 2015, 25-29th May, Opatija. (doi:https://doi.org/10.1109/MIPRO.2015.7160476)

Bradley, Michael, Berry, Robert and Farnish, Richard (2011) Methods for design of hoppers. Silos, bins and bunkers for reliable gravity flow, for pharmaceutical, food, mineral and other applications. In: BulkSolids India 2011, 6-8 April 2011, Mumbai, India. (Unpublished)

Owonikoko, A., Berry, R.J. and Bradley, M.S.A. (2010) Characterisation of extreme shape materials: “biomass and waste materials”. In: Bulk Solids Europe 2010 Conference and IMechE Symposium in New Frontiers in Bulk Materials Handling, 9-10 September 2010, Glasgow. (Submitted)

Berry, R. J. and Bradley, M. S. A. (2010) Development of the Brookfield Powder Flow Tester. In: Bulk Solids Europe 2010 Conference and IMechE Symposium in New Frontiers in Bulk Materials Handling, 9-10 September 2010, Glasgow. (Unpublished)

Angulo Pinzon, O.A., Berry, R.J., Bradley, M.S and Antonijevic, M.D. ORCID: 0000-0002-5847-7886 (2009) Modelling of dosator operation for improved manufacturing performance. In: 2009 AAPS Annual Meeting and Exposition, 8-12 Nov 2009, Los Angeles, USA.

Angulo Pinzon, O.A., Berry, R.J., Bradley, M.S., Farnish, R.J. and Antonijevic, M.D. ORCID: 0000-0002-5847-7886 (2009) The impact of powder flowing properties on dosator filling system operation. In: 2009 AAPS Annual Meeting and Exposition, 8-12 Nov 2009, Los Angeles, USA.

Berry, Rob, Bradley, Michael S. A., Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction test procedure, suitable for equipment design and powder characterisation. In: ICBMH Conference: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, Australia. (Unpublished)

Bradley, Michael S.A., Berry, Rob, Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction tester and test procedure, suitable for equipment design and powder characterisation. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)

Bradley, Michael S. A., Berry, Rob, Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia. (Unpublished)

This list was generated on Mon Oct 21 05:02:00 2019 UTC.