Skip navigation

Items where Faculty / Department / Research Groups is "School of Engineering > Manufacturing Engineering Research Group"

Items where Faculty / Department / Research Groups is "School of Engineering > Manufacturing Engineering Research Group"

Up a level
Export as [feed] RSS
Group by: Date | Creators | Item Type | Uncontrolled Keywords | No Grouping
Number of items at this level: 51.

Adekunle, A.A. and Woodhead, S.R. (2010) Zone based systems design framework for the realisation of efficient block cipher based message authentication code algorithms. In: ARES 2010 Fifth International Conference on Availability, Reliability, and Security15-18 February 2010 Krakow, Poland. Conference Publishing Services, IEEE Computer Society, Los Alamitos, California, pp. 216-221. ISBN 9781424458790 (doi:10.1109/ARES.2010.109)

Amalu, Emeka H., Ekere, Ndy and Mallik, Sabuj (2011) Evaluation of rheological properties of lead-free solder pastes and their relationship with transfer efficiency during stencil printing process. Materials and Design, 32 (6). pp. 3189-3197. ISSN 0261-3069 (doi:10.1016/j.matdes.2011.02.045)

Amalu, Emeka H. and Ekere, Ndy N. (2011) High temperature reliability of lead-free solder joints in a flip chip assembly. Journal of Materials Processing Technology, 212 (2). pp. 471-483. ISSN 0924-0136 (doi:10.1016/j.jmatprotec.2011.10.011)

Amalu, Emeka H., Lui, Y.T., Ekere, Ndy, Bhatti, R.S. and Takyi, G. (2011) Investigation of the effects of reflow profile parameters on lead-free solder bump volumes and joint integrity. In: AIP Conference Proceedings. American Institute of Physics, Melville, NY, USA, pp. 639-644. (doi:10.1063/1.3552519)

Arokiam, A. C., Barashev, A. V., Bacon, D. J. and Osetsky, Y. N. (2007) Atomic-scale computer simulation study of the interaction of Cu-rich precipitates with irradiation-produced defects in α-Fe. Philosophical Magazine, 87 (6). pp. 925-943. ISSN 1478–6435 (Print), 1478–6443 (Online) (doi:10.1080/14786430601003908)

Barashev, A. V. and Arokiam, A. C. (2006) Monte Carlo modelling of Cu atom diffusion in α-Fe via the vacancy mechanism. Philosophical Magazine Letters, 86 (5). pp. 321-332. ISSN 0950-0839 (Print), 1362-3036 (Online) (doi:10.1080/09500830600788927)

Bernasko, P.K., Mallik, S., Ekere, N.N., Seman, A. and Tayki, G. (2010) Effect of reflow profile and thermal cycle ageing on the intermetallic formation and growth in lead-free soldering. In: Electronics Packaging Technology. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 986-990. ISBN 978-1-4244-5100-5 (electronic), 978-1-4244-5099-2 (print) (doi:10.1109/EPTC.2009.5416398)

Bernasko, Peter, Mallik, Sabuj, Ekere, Ndy and Takyi, G. (2011) Evaluating the effect of pad sizes on the inter-metallic layer formation and growth for Sn-Ag-Cu solders on Cu metallization. In: International Conference on Electronics Packaging (ICEP) 2011, 13-15 April 2011, Nara Prefectural New Public Hall, Nara, Japan.

Bernasko, Peter K., Mallik, Sabuj and Takyi, G. (2015) Effect of intermetallic compound layer thickness on the shear strength of 1206 chip resistor solder joint. Soldering & Surface Mount Technology, 27 (1). pp. 52-58. ISSN 0954-0911 (doi:10.1108/SSMT-07-2013-0019)

Bernasko, Peter K., Mallik, Sabuj and Takyi, G. (2014) Effect of reflow profile parameters on surface mount chip resistor solder joint shear strength. International Journal of Materials Science and Applications, 3 (5). pp. 254-259. ISSN 2327-2635 (Print), 2327-2643 (Online) (doi:10.11648/j.ijmsa.20140305.27)

Bernasko, Peter Kojo (2012) Study of intermetallic compound layer formation, growth and evaluation of shear strength of lead-free solder joints. PhD thesis, University of Greenwich.

Durairaj, R., Mallik, S., Seman, A. and Ekere, N.N. (2009) Investigation of wall-slip behaviour in lead-free solder pastes and isotropic conductive adhesives. Sadhana - Academy Proceedings in Engineering Sciences, 34 (5). pp. 799-810. ISSN 0256-2499 (Print), 0973-7677 (Online) (doi:10.1007/s12046-009-0046-5)

Durairaj, R., Mallik, S., Seman, A., Marks, A. and Ekere, N.N. (2009) Rheological characterisation of solder pastes and isotropic conductive adhesives used for flip-chip assembly. Journal of Materials Processing Technology, 209 (8). pp. 3923-3930. ISSN 0924-0136 (doi:10.1016/j.jmatprotec.2008.09.013)

Durairaj, R., Mallik, S., Seman, A., Marks, A. and Ekere, N.N. (2008) Viscoelastic properties of solder paste and isotropic conductive adhesives used for flip-chip assembly. In: Electronic Manufacturing Technology Symposium (IEMT), 2008 33rd IEEE/CPMT International. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 1-8. ISBN 9781424433926 (print), 9781424433933 (electronic) ISSN 1089-8190 (doi:10.1109/IEMT.2008.5507801)

Durairaj, R., Man, Lam Wai, Ekere, N.N. and Mallik, S. (2010) The effect of wall-slip formation on the rheological behaviour of lead-free solder pastes. Materials and Design, 31 (3). pp. 1056-1062. ISSN 0261-3069 (doi:10.1016/j.matdes.2009.09.051)

Durairaj, R., Man, Lam Wai, Ramesh, S., Wea, Lim Chia, Leng, Eu Poh, Ekere, N.N., Mallik, S. and Seman, A. (2009) Investigation of wall-slip effect on lead-free solder paste and isotropic conductive adhesives. In: Electronics Packaging Technology Conference, 2009. EPTC '09. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 422-426. ISBN 978-1-4244-5099-2 (print), 978-1-4244-5100-5 (e-ISBN) (doi:10.1109/EPTC.2009.5416511)

Durairaj, R., Ramesh, S., Mallik, S., Seman, A. and Ekere, N. (2009) Rheological characterisation and printing performance of Sn/Ag/Cu solder pastes. Materials and Design, 30 (9). pp. 3812-3818. ISSN 0261-3069 (doi:10.1016/j.matdes.2009.01.028)

Durairaj, Rajkumar, Mallik, Sabuj and Ekere, Ndy (2008) Solder paste characterisation: towards the development of quality control (QC) tool. Soldering & Surface Mount Technology, 20 (3). pp. 34-40. ISSN 0954-0911 (doi:10.1108/09540910810885705)

Durairaj, Rajkumar, Mallik, Sabuj, Seman, Anton, Marks, Antony and Ekere, Ndy (2008) Investigation of wall-slip effect on paste release characteristic in flip-chip stencil printing process. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1328-1333. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763615)

Durairaj, Rajkumar, Man, Lam Wai, Mallik, Sabuj and Ekere, Ndy (2009) Thixotropic studies of lead-based solder, lead-free solder and conductive adhesive pastes. In: 11th Electronic Material and Packaging Conference (EMAP), 1-3 Dec 2009, Penang, Malaysia. (Unpublished)

Ekere, N and Mallik, Sabuj (2008) A methodology for characterising new lead-free solder paste formulations used for flip-chip assembly applications. In: Kobayashi, Akira, (ed.) Smart processing technology: SPT '07. High Temperature Society of Japan, Ibaraki, Japan, pp. 59-64.

Ekere, Ndy, Durairaj, Rajkumar, Mallik, Sabuj, Marks, Antony, Bauer, R. and Winter, M. (2006) Rheological characterisation of new lead-free solder paste formulations for flip-chip assembly. ESTC 2006: 1st Electronics Systemintegration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, pp. 995-1000. ISBN 1424405521 (doi:10.1109/ESTC.2006.280132)

Ekere, Ndy, Mallik, Sabuj, Durairaj, Rajkumar and Marks, Antony (2007) A study of the rheological properties of lead free solder paste formulations used for flip-chip interconnection. 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. IEEE/CPM International Electronics Manufacturing Technology Symposium . IEEE, New York, USA, pp. 165-171. ISBN 9781424413355 (doi:10.1109/IEMT.2007.4417065)

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2007) Effect of abandon time on print quality and rheological characteristics for lead-free solder pastes used for flip-chip assembly. 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. Ieee/Cpmt International Electronics Manufacturing Technology Symposium . Institute of Electrical and Electronics Engineers, New York, USA, pp. 14-19. ISBN 9781424413355 (doi:10.1109/IEMT.2007.4417048)

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2008) Effect of long-term aging on the rheological characteristics and printing performance of lead-free solder pastes used for flip-chip assembly. Smart Processing Technology, 2. pp. 131-134.

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy and Mallik, Sabuj (2011) Advanced thermal management materials for heat sinks used in microelectronics. In: EMPC-2011: 18th European Microelectronics and Packaging Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-8. ISBN 9781467306942

Kumar, Santosh, Mallik, Sabuj, Ekere, Ndy and Jung, Jaepil (2013) Stencil Printing Behavior of Lead-Free Sn-3Ag-0.5Cu Solder Paste for Wafer Level Bumping for Sub-100 μm Size Solder Bumps. Metals and Materials International, 19 (5). pp. 1083-1090. ISSN 1598-9623 (Print), 2005-4149 (Online) (doi:10.1007/s12540-013-5025-z)

Mallik, S. and Ekere, N. (2013) Metal matrix composites as thermal management materials for automotive applications. In: Magagnin, Luca, (ed.) Engineered Metal Matrix Composites: Forming Methods, Material Properties and Industrial Applications. Nova Science Publishers, Inc., New York, USA, pp. 113-126. ISBN 9781620817193

Mallik, S., Ekere, N.N. and Bhatti, R. (2010) Empirical modeling of the time-dependent structural build-up of lead-free solder pastes used in the electronics assembly applications. Journal of ASTM International, 7 (9). ISSN 1546-962X (doi:10.1520/JAI103043)

Mallik, S., Ekere, N.N., Durairaj, R., Marks, A.E. and Seman, A. (2009) Wall-slip effects in SnAgCu solder pastes used in electronics assembly applications. Materials & Design, 30 (10). pp. 4502-4506. ISSN 0261-3069 (doi:10.1016/j.matdes.2009.05.028)

Mallik, S., Ekere, N.N., Marks, A.E., Seman, A. and Durairaj, R. (2010) Modeling the structural breakdown of solder paste using the structural kinetic model. Journal of Materials Engineering and Performance, 19 (1). pp. 40-45. ISSN 1059-9495 (Print), 1544-1024 (Online) (doi:10.1007/s11665-009-9448-0)

Mallik, S., Schmidt, M., Bauer, R. and Ekere, N.N. (2010) Evaluating solder paste behaviours through rheological test methods and their correlation to the printing performance. Soldering & Surface Mount Technology, 22 (4). pp. 42-49. ISSN 0954-0911 (doi:10.1108/09540911011076871)

Mallik, Sabuj, Chan, Erica Hiu Laam and Ekere, Ndy (2012) Nonlinear Viscoelastic Characteristics of Sn-Ag-Cu Solder Pastes Used in Electronics Assembly Applications. Journal of Materials Engineering and Performance, 22 (4). pp. 1186-1193. ISSN 1059-9495 (Print), 1544-1024 (Online) (doi:10.1007/s11665-012-0360-7)

Mallik, Sabuj and Ekere, Ndy (2011) Investigating the effects of area ratio and aspect ratio on stencil printing process used in the electronics assembly line. In: International Conference on Electronics Packaging (ICEP) 2011, 13-15 April 2011, Nara Prefectural New Public Hall, Nara, Japan.

Mallik, Sabuj, Ekere, Ndy, Best, Chris and Bhatti, Raj (2011) Investigation of thermal management materials for automotive electronic control units. Applied Thermal Engineering, 31 (2-3). pp. 355-362. ISSN 1359-4311 (doi:10.1016/j.applthermaleng.2010.09.023)

Mallik, Sabuj, Ekere, Ndy, Durairaj, Rajkumar and Marks, Antony (2008) An investigation into the rheological properties of different lead-free solder pastes for surface mount applications. Soldering & Surface Mount Technology, 20 (2). pp. 3-10. ISSN 0954-0911 (doi:1108/09540910810871511)

Mallik, Sabuj, Ekere, Ndy, Marks, Antony, Seman, Anton and Durairaj, Rajkumar (2008) Modelling of the time-dependent flow behaviour of lead-free solder pastes used for flip-chip assembly applications. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 1219-1224. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684527)

Mallik, Sabuj, Ekere, Ndy, Seman, Anton and Durairaj, Rajkumar (2009) Modelling the time-dependent behaviour of solder pastes used in the electronics assembly applications. In: 11th Electronic Material and Packaging Conference (EMAP 2009), 1-2 Dec 2009, Penang, Malaysia. (Unpublished)

Mallik, Sabuj and Kaiser, Franziska (2014) Reliability study of subsea electronic systems subjected to accelerated thermal cycle ageing. In: Proceedings of The World Congress on Engineering 2014. Newswood Limited, Hong Kong, pp. 1436-1440. ISBN 978-988-19253-5-0 ISSN 2078-0958 (Print), 2078-0966 (Online)

Mallik, Sabuj and Mehdawi, Ahmed Z. El (2014) Shear strength and fracture surface studies of ball grid array (BGA) flexible surface-mount electronics packaging under isothermal ageing. In: Yang, Gi-Chul, Ao, Sio-Iong and Gelman, Len, (eds.) Transactions on Engineering Technologies. Special Volume of the World Congress on Engineering 2013. Springer Netherlands, pp. 31-41. ISBN 9789401788311 (doi:10.1007/978-94-017-8832-8_3)

Mallik, Sabuj, Njoku, Jude and Takyi, Gabriel (2015) Quantitative evaluation of voids in lead free solder joints. Applied Mechanics and Materials, 772. pp. 284-289. ISSN 1660-9336

Mallik, Sabuj, Schmidt, M., Bauer, R. and Ekere, Ndy (2008) Influence of solder paste components on rheological behaviour. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, USA, pp. 1135-1140. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684512)

Mallik, Sabuj, Thieme, Jens, Bauer, R., Ekere, Ndy, Seman, Anton, Bhatti, Rajinderpal and Durairaj, Rajkumar (2010) Study of the rheological behaviour of Sn-Ag-Cu solder pastes and their correlation with printing performance. In: EPTC 2009 Proceedings of 2009 11th Electronics Packaging Technology Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 869-874. ISBN 978-1-4244-5099-2 (Print), 978-1-4244-5100-5 (e-ISBN) (doi:10.1109/EPTC.2009.5416423)

Marks, A.E., Mallik, S., Ekere, N.N. and Seman, A. (2008) Effect of temperature on slumping behaviour of lead-free solder paste and its rheological simulation. 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 829-832. ISBN 97814244-28137 (Print), 978-1-4244-2814-4 (Electronic) (doi:10.1109/ESTC.2008.4684459)

Marks, Antony Edward (2012) Characterisation of lead-free solder pastes and their correlation with the stencil printing process performance. PhD thesis, University of Greenwich.

Otiaba, K.C., Bhatti, R.S., Ekere, N.N., Mallik, S., Amalu, E.H. and Ekpu, M. (2011) Thermal effects of die-attach voids location and style on performance of chip level package. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 231-236. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145176)

Otiaba, Kenny C. (2013) Thermal and thermo-mechanical performance of voided lead-free solder thermal interface materials for chip-scale packaged power device. PhD thesis, University of Greenwich.

Otiaba, Kenny C., Bhatti, R.S., Ekere, N.N., Mallik, S., Alam, M.O., Amalu, E.H. and Ekpu, M. (2012) Numerical study on thermal impacts of different void patterns on performance of chip-scale packaged power device. Microelectronics Reliability, 52 (7). pp. 1409-1419. ISSN 0026-2714 (doi:10.1016/j.microrel.2012.01.015)

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) Development of an in-situ, non-destructive ultrasonic monitoring technique for solder pastes. 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 209-214. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684351)

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) In-situ non-destructive ultrasonic rheology technique for monitoring different lead-free solder pastes for surface mount applications. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1448-1454. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763635)

Takyi, G., Amalu, E.H. and Bernasko, P.K. (2011) Effect of solder joint integrity on the thermal performance of a TEC for a 980nm pump laser module. Soldering and Surface Mount Technology, 23 (2). pp. 115-119. ISSN 0954-0911 (doi:10.1108/09540911111120186)

This list was generated on Wed Oct 12 11:27:19 2016 BST.