Skip navigation

Items where Faculty / Department / Research Groups is "School of Engineering > Department of Engineering Systems"

Items where Faculty / Department / Research Groups is "School of Engineering > Department of Engineering Systems"

Up a level
Export as [feed] RSS
Group by: Date | Creators | Item Type | Uncontrolled Keywords | No Grouping
20kW bidirectional dual active bridge DC-DC converter prototype 3D representative volume elements a-Fe A. Polymer–matrix composites (PMCs) accelerated temperature cycle (ATC) ad-hoc network additive white Gaussian noise (AWGN) adhesion testing methods adhesives advanced characterization aerospace aerospace energy storage applications aerospace manufacturing ageing agent construction tools agent technology aggregation approach air pollution Al/SiC aluminium aluminium production amphoteric oxide amplifier anti-segmentation system Artificial Neural Network AS-System assembly assembly lines associated angular system associated angular systems attenuation authentication systems autmotive industry automatic access control automotive automotive applications automotive engineering automotive product development axiomatic design BAE systems batteries battery charging battery powered vehicles Bicycle robot binder biodeterioration testing laboratories biodeterioration testing manufacturing processes biomass biomass materials biomass mixes board configuration board of directors borosilicate glass boundary conditions bridge health assessment bridges bulk properties bulk solids handling technology business improvement methods business performance business process C. Computational modelling C. Numerical analysis CAD capacitance CAPP carbon dioxide carbon emission carbon emissions carbon footprint carbon optimized virtual power plant cellular wireless communication systems cement-based materials centrifugal-accelerator erosion tester CFD change management characteristics charging equipment chip chip-scale packaged power device choke-slot circuit breaker closed loop supply chains coal coefficient of thermal expansion Coefficient test equipment cogeneration cognitive radio collaborative networks collaborative product development collabvoration combined cycle gas turbine combined cycle power stations compensation computer based teaching computer modelling computer networks computer simulation computer-aided process planning conceptual design concrete cracking construction continuous improvements continuum mechanics control concepts conveying systems copper cost coupling analysis CQI feedback creep creep-recovery cryptographic frameworks cryptography Cu-rich cultural change customer-driven customisation data communication DC-DC converter DCE DCM Delays demand response demand side management density design design challenges design for manufacture design for service design knowledge reuse design methodology design process modelling design process support design requirements design reuse design support differential amplifiers digital communication systems direct mount snubber disassembly distance sensors Distributed Computing Environment distributed control distributed control approach distributed energy resources distributed generation distributed power generation distributed role-based access control distributed storage distribution network distribution networks distribution systems dosator filling machines dosators DRBAC DRM dual active bridge (DAB) dual ground E. Weaving EAF Effective elastic properties effective properties electric vehicle electric vehicle grid integration Electric Vehicles electrical engineering electronic control unit electronic materials Electronic Nose electronic unit electronics assembly applications electronics manufacturing electronics packaging emissions emissions markets emulsions energy and resource efficiency and effectiveness energy management energy storage engineering and management engineering design enterprise architecture framework enterprise integration enterprise knowledge enterprise knowledge search enterprise modelling environmental dispatch environmental economics erosion Erosive wear EV grid integration face-to-face meetings fatigue fatigue failure fibre reinforced composites file type filters finite element analysis finite element analysis (FEA) finite element modelling (FEM) finite element updating firepolishing first year engineering flip chip flip chip (FC) flip chip assembly flip-chip flip-chip assemblies flip-chip assembly flip-chip assembly applications flipchips flow flow property measurement fluid mechanics flux food production foundry FR4 substrate fractures Friction friction factor gain gain-accuracy gas sensors gas turbine power stations gas-blast erosion tester Geometry global product development Greece grid shift ground penetrating radar (GPR) Gyroscopic stabilizer H loop shaping control handling heat sink heat sink geometry Hierarchical Neural Network high gain high linearity high power IGBTs High strain rate high temperature electronics high-frequency amplifier high-rate compression high-temperature electronics homogenization HTE hydraulic machinery hydraulic systems identity management Implants improvement strategy methodology improving operations in-vitro fertilization indexing process industrial production industry information and knowledge Search information retrieval information systems information systems design information systems integration innovation innovation management integrated strategy application integrity intelligent agent inter-metallic compound (IMC) inter-metallic compounds inter-relationships interface Interference interference model intermodulation distortion internal feedback Intrinsic Timing irradiation-produced isotropic conductive adhesives KM know-how knowledge knowledge management knowledge management knowledge representation knowledge reuse knowledge search methodology knowledge sharing knowledge sharing framework knowledge system design lead lead-free lead-free solder lead-free solder paste lead-free solder pastes lead-free soldering Leaky-Integrate and Fire lean environment lean manufacture learning least mean square (LMS) life cycle life-cycle life-cycle material breakdown linear visco-elastic linearisation linearity literature review load flow Long Term Evolution LTE-A maintenance management knowledge manufacturers manufactures manufacturing manufacturing and cost evaluation manufacturing business improvements manufacturing information systems manufacturing knowhow manufacturing knowledge manufacturing operations manufacturing processes marine engineers mass production materials materials science mechanical engineering Mechanical properties Medical product development meeting capture MERGE project Meso-mechanical modelling message authentication information metaknowledge metaknowledge ontology metal target metallurgy Micro-CHP micro-contact micro-gap micro-generation micro-generators micro-grids micro-pipettes micro-sources microCHP emission microelectronics microgeneration source microgeneration sources microgenerator microgrid microgrids microstructure Microstructures microsystems microtools MIMO OFDM miniaturization mobile agents mobile antennas mobile communication system mobile network mobile robots model uncertainty modeling processes modelling Monte Carlo approach moulding sand multi-agent multi-agent system technology multi-agent systems multi-component gas mixture measurements multi-user communication multiagent systems multiband antennas multilingual multiple-band antennas negative impedance negative impedance compensation network topology neural networks new product design new product development new product development (NPD) new product introduction new solder paste formulation nonlinear control systems nonlinear system nonlinear systems NPD numerical simulation ontology Open source design operation sequencing optimisation optimization organisational characteristics organizational knowledge-based system Orthotics part-loading particle dynamics particle spin Particle swarm optimization particles particulate peer-to-peer periodic boundary conditions Personal Communication Service (PCS 1900) band Personalised health care pin-loaded patches pipelines pipes plan do check acts PLM Plytron pneumatic conveying pneumatic conveying systems pneumatic machinery pneumatic systems Polymer Composites polypropylene potential systems power generation power generation dispatch power system control power system operators power systems predictions predictive modelling pressure vessels printed circuit boards (PCBs) printing printing performance printing processes probabilistic approach probability probability theory process engineering process improvement process improvements processing technology product product data management product design process product designers product development product development integration architecture product development process product knowledge analysis product life cycle management product lifecycle management product planning product service system product-service systems products and services profit project success rate proof of concept prototypes PSS pumps quality quality control radial control radial systems radio frequency identification radio over fiber radio signal processing radio wave propagation rapid prototyping RC Neuron Modelling recursive least square (RLS) reflow profile reinforced concrete structures remanufacturing and recycling technologies remote antenna units remote networks renewable energy repair and overhaul (MRO) representative volume element requirement management requirements management residential charging residential distribution networks resource aggregation reuse rheological behaviour rheological behaviours rheological characterisation rheological characteristics rheological characterization rheology routing protocols SABER simulations Scheduling algorithms scheduling applications security security block ciphers semi-automatics sequential power flows service engineering service issues service knowledge service model services sector shear testing signal analysis Signal to noise ratio simulation simulation results slip smart charging smart DC smart grids snubber capacitor software errors software systems solder alloys solder die attach solder joint solder joint integrity solder joint reliability solder joints solder paste solder pastes solder thermal interface materials (STIMs) soldering solders solid particle erosion solid particle impact spatial distribution uncertainties SPE stabilisation stabilization stacked microstrip antennas stem cells stencil printing stencil printing process STEP STL STL file generation stochastic modelling stochastic simulation strain-rate dependence strategy integration stress stretched exponential model Structure-specified controller substations supply chain supply chain management (SCM) surface mount components Surgical tools sustainability in manufacturing sustainable energy technical product-service systems technical services technology thermal thermal conductivity thermal constriction thermal cycling thermal efficiency thermal interface materials thermal management thermal management materials thermal overloads thixotropy three dimensional representative volume elements Three-body abrasion three-dimensional finite element analysis Throughput tolerance tolerance analysis training transportation tribology TRIZ tubing two phase flow ubiquitous networks UK generic distribution network ultra-fine pitch assembly Uplink validation and verification valves vehicle market sales vibration video virtual enterprise virtual learning environments virtual power plant virtual power plant control concepts virtual power plants virtual testing virtual testing/framework viscoelasticity Viscoplasticity viscosity voids and thermal resistance voltage drops Volterra analysis VPP approach Wall-slip wall-slip behavior wall-slip effects water water reactor pressure vessels web-page wind power generation wire-ended snubber wireless communication systems wireless network Woven textile composites yam flour zero voltage switching (ZVS) ZVS boundary
Number of items at this level: 845.

20kW bidirectional dual active bridge DC-DC converter prototype

Naayagi, R.T., Shuttleworth, R. and Forsyth, A.J. (2011) Investigating the effect of snubber capacitor on high power IGBT turn-off. In: Proceedings of the 2011 1st International Conference on Electrical Energy Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineering, Inc., Piscataway, NJ, USA, pp. 50-55. ISBN 9781612843780 (doi:10.1109/ICEES.2011.5725301)

3D representative volume elements

Akpoyomare, A. I. and Okereke, M. I. (2013) A virtual test-bed for the prediction of holistic effective elastic properties of UD composites. In: 19th International Conference on Composite Materials (ICCM19), 28 JUL 2013 - 2 AUG 2013, Montreal, Canada.

a-Fe

Arokiam, A. C., Barashev, A. V., Bacon, D. J. and Osetsky, Yu. N. (2006) Characteristics of the interaction of Cu-rich precipitates with irradiation-produced defects in α-Fe. Philosophical Magazine Letters, 85 (9). pp. 491-501. ISSN 0950–0839 (Print), 1362–3036 (Online) (doi:10.1080/09500830500300047)

A. Polymer–matrix composites (PMCs)

Okereke, M.I., Akpoyomare, A.I. and Bingley, M.S. (2014) Virtual testing of advanced composites, cellular materials and biomaterials: A review. Composites Part B: Engineering, 60. 637 - 662. ISSN 1359-8368 (doi:10.1016/j.compositesb.2014.01.007)

accelerated temperature cycle (ATC)

Amalu, E.H, Ekere, N.N. and Aminu, G. (2011) Effects of inter-metallic compound on high temperature reliability of flip chip interconnects for fine pitch applications. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 208-213. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145173)

ad-hoc network

Bello, Lawal (2013) Power conservation and performance analysis of mobile ad hoc wireless networks. PhD thesis, University of Greenwich.

additive white Gaussian noise (AWGN)

Eneh, T., Rapajic, P., Anang, K., Bakalis, P. and Bello, L. (2012) Information capacity of adaptive MIMO OFDM wireless communication systems. In: Adaptive Science and Technology (ICAST). Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 157-164. ISBN 978-1-4673-0758-1 (doi:10.1109/ICASTech.2011.6145168)

adhesion testing methods

Ermis, Ertan (2011) Establishment of a repeatable test procedure for measuring adhesion strength of particulates in contact with surfaces. PhD thesis, University of Greenwich.

adhesives

Durairaj, Rajkumar (2006) Rheological characterisation of solder pastes and isotropic conductive adhesives (ICAs) for microsystems assembly technology. PhD thesis, University of Greenwich.

advanced characterization

Mallik, S., Ekere, N.N., Marks, A.E., Seman, A. and Durairaj, R. (2010) Modeling the structural breakdown of solder paste using the structural kinetic model. Journal of Materials Engineering and Performance, 19 (1). pp. 40-45. ISSN 1059-9495 (Print), 1544-1024 (Online) (doi:10.1007/s11665-009-9448-0)

aerospace

Berkhauer-Smith, Samantha (2009) The integration of lean thinking and manufacturing business improvement methods within the aerospace supply chain. PhD thesis, University of Greenwich.

aerospace energy storage applications

Naayagi, R.T., Shuttleworth, R. and Forsyth, A.J. (2011) Investigating the effect of snubber capacitor on high power IGBT turn-off. In: Proceedings of the 2011 1st International Conference on Electrical Energy Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineering, Inc., Piscataway, NJ, USA, pp. 50-55. ISBN 9781612843780 (doi:10.1109/ICEES.2011.5725301)

aerospace manufacturing

Zhu, Haihua, Gao, James, Li, Dongbo and Tang, Dunbing (2012) A Web-based Product Service System for aerospace maintenance, repair and overhaul services. Computers in Industry, 63 (4). pp. 338-348. ISSN 0166-3615 (doi:10.1016/j.compind.2012.02.016)

ageing

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2008) Effect of long-term aging on the rheological characteristics and printing performance of lead-free solder pastes used for flip-chip assembly. Smart Processing Technology, 2. pp. 131-134.

agent construction tools

Jian, Guo, Gao, James and Wang, Yinglin (2010) A multi-agent based knowledge search framework to support the product development process. International Journal of Computer Integrated Manufacturing, 23 (3). pp. 237-247. ISSN 0951-192X (doi:10.1080/09511920903529222)

agent technology

Jian, Guo (2011) Knowledge search for new product development: a multi-agent based methodology. PhD thesis, University of Greenwich.

aggregation approach

Raab, A. F., Ferdowsi, M., Karfopoulos, E., Unda, I. Grau, Skarvelis-Kazakos, S., Papadopoulos, P., Abbasi, E., Cipcigan, L.M., Jenkins, N., Hatziargyriou, N. and Strunz, K. (2011) Virtual power plant control concepts with electric vehicles. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082214)

air pollution

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2010) Micro-generation for 2050: life-cycle carbon footprint of micro-generation sources. In: 2009 44th International Universities’ Power Engineering Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-6823-2

Al/SiC

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy and Mallik, Sabuj (2011) Advanced thermal management materials for heat sinks used in microelectronics. In: EMPC-2011: 18th European Microelectronics and Packaging Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-8. ISBN 9781467306942

aluminium

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy, Mallik, Sabuj, Amalu, Emeka and Otiaba, Kenny (2011) Investigation of effects of heat sinks on thermal performance of microelectronic package. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 127-132. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145164)

aluminium production

Dyrøy, Are (2006) Quantification and mitigation of segregation in the handling of alumina in aluminium production. PhD thesis, University of Greenwich.

amphoteric oxide

Dyrøy, Are (2006) Quantification and mitigation of segregation in the handling of alumina in aluminium production. PhD thesis, University of Greenwich.

amplifier

Ali, M. Tanseer, Wu, Ruiheng, Callaghan, Peter and Rapajic, Predrag (2011) Design of a highly linear high frequency amplifier using Volterra model. In: Microwave, Antenna, Propagation, and EMC Technologies for Wireless Communications (MAPE). Microwave, Antenna, Propagation, and EMC Technologies for Wireless Communications (MAPE) . Institute of Electrical and Electronic Engineers, Pistacaway, USA, pp. 355-358. ISBN 978-1-4244-8268-9 (doi:10.1109/MAPE.2011.6156259)

Ali, M. Tanseer, Wu, Ruiheng, Callaghan, Peter and Rapajic, Predrag (2014) Highly linear RF amplifier design: theoretical analysis and experimental study. International Journal of Electronics, 101 (1). pp. 98-112. ISSN 0020-7217 (Print), 1362-3060 (Online) (doi:10.1080/00207217.2013.769189)

Wu, Ruiheng, Lidgey, F.J. and Hayatleh, K. (2008) Design of differential amplifier with negative impedance compensation. 2008 4th International Conference on Circuits and Systems for Communications. Institute of Electrical and Electronics Engineers, New York, pp. 589-593. ISBN 9781424417070 (doi:10.1109/ICCSC.2008.131)

Wu, Ruiheng and Wang, Chen (2008) Stability analysis of the amplifier with negative impedance compensation. 2008 51st Midwest Symposium on Circuits and Systems. Institute of Electrical and Electronics Engineers, New York, pp. 803-806. ISBN 9781424421664

anti-segmentation system

Dyrøy, Are (2006) Quantification and mitigation of segregation in the handling of alumina in aluminium production. PhD thesis, University of Greenwich.

Artificial Neural Network

Balisson, Dushan and Melis, Wim J.C. (2016) Hierarchical neural network model with intrinsic timing. In: International Conference on Applied System Innovation 2016. IEEE. (Submitted)

Tao, Mei and Seals, R.C. (1993) Multicomponent gas-mixture measurements using an array of gas sensors and an artificial neural-network. Journal of Microcomputer Applications, 16 (2). pp. 203-210. (doi:10.1006/jmca.1993.1018)

AS-System

Dyrøy, Are (2006) Quantification and mitigation of segregation in the handling of alumina in aluminium production. PhD thesis, University of Greenwich.

assembly

Durairaj, Rajkumar (2006) Rheological characterisation of solder pastes and isotropic conductive adhesives (ICAs) for microsystems assembly technology. PhD thesis, University of Greenwich.

assembly lines

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2007) Effect of abandon time on print quality and rheological characteristics for lead-free solder pastes used for flip-chip assembly. 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. Ieee/Cpmt International Electronics Manufacturing Technology Symposium . Institute of Electrical and Electronics Engineers, New York, USA, pp. 14-19. ISBN 9781424413355 (doi:10.1109/IEMT.2007.4417048)

associated angular system

Sangelaji, Z. and Banks, S.P. (2009) Radial control design for a class of nonlinear systems. Control and Intelligent Systems, 37 (3). pp. 144-151. ISSN 1480-1752 (Print), 1925-5810 (Online) (doi:10.2316/Journal.201.2009.3.201-2018)

Sangelaji, Zahra (2012) Stabilisation of Multi-Input Nonlinear Systems Using Associated Angular Approach. In: Control (CONTROL), 2012 UKACC International Conference on. IEEE, pp. 485-489. ISBN 9781467315593 (doi:10.1109/CONTROL.2012.6334678)

associated angular systems

Sangelaji, Z. and Banks, S.P. (2008) Control design and stabilization analysis of non-linear systems using angular representations. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 222 (6). pp. 457-463. ISSN 0959-6518 (Print), 2041-3041 (Online) (doi:10.1243/09596518JSCE502)

attenuation

Durairaj, Rajkumar, Mallik, Sabuj, Seman, Anton, Marks, Antony and Ekere, Ndy (2008) Investigation of wall-slip effect on paste release characteristic in flip-chip stencil printing process. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1328-1333. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763615)

Mallik, Sabuj, Schmidt, M., Bauer, R. and Ekere, Ndy (2008) Influence of solder paste components on rheological behaviour. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, USA, pp. 1135-1140. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684512)

Marks, A.E., Mallik, S., Ekere, N.N. and Seman, A. (2008) Effect of temperature on slumping behaviour of lead-free solder paste and its rheological simulation. 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 829-832. ISBN 97814244-28137 (Print), 978-1-4244-2814-4 (Electronic) (doi:10.1109/ESTC.2008.4684459)

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) Development of an in-situ, non-destructive ultrasonic monitoring technique for solder pastes. 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 209-214. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684351)

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) In-situ non-destructive ultrasonic rheology technique for monitoring different lead-free solder pastes for surface mount applications. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1448-1454. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763635)

authentication systems

Ma, Mingchao (2007) Distributed RBAC for subscription-based remote network services. PhD thesis, University of Greenwich.

autmotive industry

Tavakolikhou, Mehdi (2013) A knowledge sharing framework to support rapid prototyping in collaborative automotive supply chain. PhD thesis, University of Greenwich.

automatic access control

Rapajic, Predrag, Kabir, Ahsaul, Huang, Kao-Cheng and Wu, Ruiheng (2007) Next generation identity card: RFID-based automatic access control system for universities. In: Kartalopoulos, Stamatios, Demiralp, Metin, Mastorakis, Nikos, Soni, Ritu and Nassar, Hamed, (eds.) Selected Topics on Circuits, Systems, Electronics, Control & Signal Processing: Proceedings of the 6th WSEAS International Conference on Circuits, Systems, Electronics, Control & Signal Processing. Electrical and Computer Engineering . WSEAS Press, Singapore, pp. 480-483. ISBN 9789606766282

automotive

Otiaba, K.C., Ekere, N.N., Bhatti, R.S., Mallik, S., Alam, M.O. and Amalu, E.H. (2011) Thermal interface materials for automotive electronic control unit: Trends, technology and R&D challenges. Microelectronics Reliability, 51 (12). pp. 2031-2043. ISSN 0026-2714 (doi:10.1016/j.microrel.2011.05.001)

automotive applications

Otiaba, K.C., Bhatti, R.S., Ekere, N.N., Mallik, S., Amalu, E.H. and Ekpu, M. (2011) Thermal effects of die-attach voids location and style on performance of chip level package. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 231-236. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145176)

automotive engineering

Grau, I., Skarvelis-Kazakos, S., Papadopoulos, P., Cipcigan, L.M. and Jenkins, N. (2010) Electric vehicles support for intentional islanding: A prediction for 2030. In: 41st North American Power Symposium. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 1-5. ISBN 978-1-4244-4428-1 (Print), 978-1-4244-4429-8 (Online) (doi:10.1109/NAPS.2009.5484016)

automotive product development

Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.

Zhang, Pengcheng, Gao, James and Wang, Yinglin (2011) Requirement driven knowledge management system design to support automotive product development. International Journal of Product Lifecycle Management (IJPLM), 5 (2-4). pp. 202-223. ISSN 1743-5110 (doi:10.1504/IJPLM.2011.043188)

axiomatic design

Gao, James, Fei, Genyuan and Tang, X.Q. (2009) A TRIZ based methodology for the analysis of the coupling problems in complex engineering design. In: Proceedings of the 19th CIRP Design Conference – Competitive Design. Cranfield University Press, Cranfield University, pp. 285-292. ISBN 9780955743641

BAE systems

Piorkowski, B.A., Evans, R.D. and Gao, J.X. (2011) Development of a face-to-face meeting capture and indexing process. In: Proceedings of the 2011 15th International Conference on Computer Supported Cooperative Work in Design, CSCWD2011. IEEE Computer Society, Piscataway, NJ, USA, pp. 4-8. ISBN 9781457703867 (doi:10.1109/CSCWD.2011.5960047)

batteries

Grau, I., Skarvelis-Kazakos, S., Papadopoulos, P., Cipcigan, L.M. and Jenkins, N. (2010) Electric vehicles support for intentional islanding: A prediction for 2030. In: 41st North American Power Symposium. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 1-5. ISBN 978-1-4244-4428-1 (Print), 978-1-4244-4429-8 (Online) (doi:10.1109/NAPS.2009.5484016)

battery charging

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Awad, B., Cipcigan, L.M. and Jenkins, N. (2010) Impact of residential charging of electric vehicles on distribution networks, a probabilistic approach. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2012) Electric vehicles' impact on British distribution networks. IET Electrical Systems in Transportation, 2 (3). pp. 91-102. ISSN 2042-9738 (doi:10.1049/iet-est.2011.0023)

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2011) Predicting Electric Vehicle impacts on residential distribution networks with distributed generation. In: 2010 IEEE Vehicle Power and Propulsion Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-8220-7 (doi:10.1109/VPPC.2010.5729009)

battery powered vehicles

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Awad, B., Cipcigan, L.M. and Jenkins, N. (2010) Impact of residential charging of electric vehicles on distribution networks, a probabilistic approach. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

Bicycle robot

Bui, Trung Thanh, Parnichkun, M and Le, Chi (2010) Structure-specified H loop shaping control for balancing of bicycle robots: A particle swarm optimization approach. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 224 (7). pp. 857-867. ISSN 0959-6518 (Print), 2041-3041 (Online) (doi:10.1243/09596518JSCE950)

binder

Shehu, T. and Bhatti, R.S. (2012) The use of Yam flour (starch) as binder for sand mould production in Nigeria. World Applied Sciences Journal, 16 (6). pp. 858-862. ISSN 1818-495 (doi:wasj/wasj16(6)12/14.pdf)

biodeterioration testing laboratories

Burnett, Anthony John (1996) The use of laboratory erosion tests for the prediction of wear in pneumatic conveyor bends. PhD thesis, University of Greenwich.

biodeterioration testing manufacturing processes

Burnett, Anthony John (1996) The use of laboratory erosion tests for the prediction of wear in pneumatic conveyor bends. PhD thesis, University of Greenwich.

biomass

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2009) Micro-generation for 2050: emissions performances of micro-generation sources during operation. Pollack Periodica, 4 (2). pp. 89-99. ISSN 1788-1994 (Print), 1788-3911 (Online) (doi:10.1556/Pollack.4.2009.2.9)

biomass materials

Owonikoko, Aminu (2012) Predicting storage vessel geometry requirements for discharge of extreme shape materials. MPhil thesis, University of Greenwich.

biomass mixes

Khan, Naushad Salim (2008) Handling characteristics of coal/biomass mixes: measurements and establishing benchmarks. PhD thesis, University of Greenwich.

board configuration

Koufopoulos, Dimitrios N., Coutroubis, Alec and Lagoudis, Ioannis N. (2007) One size does not fit all: revisiting conceptual wisdom by assessing corporate governance practices of the Greek shipping management companies. In: International Association of Maritime Economists, IAME, Greece Challenges and Trends in Shipping, Markets, Investments and Policies, 4-6 July 2007, Athens. (Unpublished)

board of directors

Koufopoulos, Dimitrios N., Coutroubis, Alec and Lagoudis, Ioannis N. (2007) One size does not fit all: revisiting conceptual wisdom by assessing corporate governance practices of the Greek shipping management companies. In: International Association of Maritime Economists, IAME, Greece Challenges and Trends in Shipping, Markets, Investments and Policies, 4-6 July 2007, Athens. (Unpublished)

borosilicate glass

Mayur, Yaul, Bhatti, Rajinderpal and Lawrence, Stephen (2008) Evaluating the process of borosilicate glass capillaries used for fabrication of in-vitro fertilization (IVF) micro-pipettes. Biomedical Microdevices, 10 (1). pp. 123-128. ISSN 1387-2176 (doi:10.1007/s10544-007-9117-8)

boundary conditions

Akpoyomare, A. I. and Okereke, M. I. (2013) A virtual test-bed for the prediction of holistic effective elastic properties of UD composites. In: 19th International Conference on Composite Materials (ICCM19), 28 JUL 2013 - 2 AUG 2013, Montreal, Canada.

bridge health assessment

Kilic, Gokhan (2012) Application of advanced non-destructive testing methods on bridge health assessment and analysis. PhD thesis, University of Greenwich.

bridges

Kilic, Gokhan (2012) Application of advanced non-destructive testing methods on bridge health assessment and analysis. PhD thesis, University of Greenwich.

bulk properties

Jones, Mark G. (1988) The influence of bulk particulate properties on pneumatic conveying performance. PhD thesis, Thames Polytechnic.

bulk solids handling technology

Owonikoko, Aminu (2012) Predicting storage vessel geometry requirements for discharge of extreme shape materials. MPhil thesis, University of Greenwich.

business improvement methods

Berkhauer-Smith, Samantha (2009) The integration of lean thinking and manufacturing business improvement methods within the aerospace supply chain. PhD thesis, University of Greenwich.

business performance

Piorkowski, B.A., Evans, R.D. and Gao, J.X. (2011) Development of a face-to-face meeting capture and indexing process. In: Proceedings of the 2011 15th International Conference on Computer Supported Cooperative Work in Design, CSCWD2011. IEEE Computer Society, Piscataway, NJ, USA, pp. 4-8. ISBN 9781457703867 (doi:10.1109/CSCWD.2011.5960047)

business process

Gao, James and Bradfield, Daniel J. (2007) A methodology to facilitate knowledge sharing in the new product development process. International Journal of Production Research, 45 (7). pp. 1489-1504. ISSN 0020-7543 (doi:10.1080/00207540600942227)

C. Computational modelling

Okereke, M.I., Akpoyomare, A.I. and Bingley, M.S. (2014) Virtual testing of advanced composites, cellular materials and biomaterials: A review. Composites Part B: Engineering, 60. 637 - 662. ISSN 1359-8368 (doi:10.1016/j.compositesb.2014.01.007)

C. Numerical analysis

Okereke, M.I., Akpoyomare, A.I. and Bingley, M.S. (2014) Virtual testing of advanced composites, cellular materials and biomaterials: A review. Composites Part B: Engineering, 60. 637 - 662. ISSN 1359-8368 (doi:10.1016/j.compositesb.2014.01.007)

CAD

Eadie, R. and Gao, James (2008) An industrial implementation of a methodology for the optimisation of product design tolerances. In: Kai, Cheng, Makatsoris, Harris C. and Harrison, David, (eds.) Advances in manufacturing technology XXII: the proceedings of the 6th International Conference on Manufacturing Research ICMR08, 9th-11th September 2008, London UK. Brunel University College, Brunel University, pp. 161-170. ISBN 9781902316604

capacitance

Naayagi, R.T., Shuttleworth, R. and Forsyth, A.J. (2011) Investigating the effect of snubber capacitor on high power IGBT turn-off. In: Proceedings of the 2011 1st International Conference on Electrical Energy Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineering, Inc., Piscataway, NJ, USA, pp. 50-55. ISBN 9781612843780 (doi:10.1109/ICEES.2011.5725301)

CAPP

Mwinkuka, T., Hinduja, S. and Owodunni, Oladele (2007) Extendible operation sequencing for turn-milled components. CIRP Annals - Manufacturing Technology, 56 (1). pp. 473-478. ISSN 0007-8506 (doi:10.10.1016/j.cirp.2007.05.113)

carbon dioxide

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2010) Micro-generation for 2050: life-cycle carbon footprint of micro-generation sources. In: 2009 44th International Universities’ Power Engineering Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-6823-2

carbon emission

Skarvelis-Kazakos, Spyros, Papadopoulos, Panagiotis, Grau, Iñaki, Gerber, Annelies, Cipcigan, Liana M., Jenkins, Nick and Carradore, Loredana (2010) Carbon optimized virtual power plant with electric vehicles. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

carbon emissions

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2009) Micro-generation for 2050: emissions performances of micro-generation sources during operation. Pollack Periodica, 4 (2). pp. 89-99. ISSN 1788-1994 (Print), 1788-3911 (Online) (doi:10.1556/Pollack.4.2009.2.9)

Skarvelis-Kazakos, Spyros, Papadopoulos, Panagiotis, Grau, Iñaki, Gerber, Annelies, Cipcigan, Liana M., Jenkins, Nick and Carradore, Loredana (2010) Carbon optimized virtual power plant with electric vehicles. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

Skarvelis-Kazakos, Spyros, Rikos, Evangelos, Kolentini, Efstathia, Cipcigan, Liana M. and Jenkins, Nick (2013) Implementing agent-based emissions trading for controlling Virtual Power Plant emissions. Electric Power Systems Research, 102. ISSN 0378-7796 (doi:10.1016/j.epsr.2013.04.004)

carbon footprint

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2009) Micro-generation for 2050: emissions performances of micro-generation sources during operation. Pollack Periodica, 4 (2). pp. 89-99. ISSN 1788-1994 (Print), 1788-3911 (Online) (doi:10.1556/Pollack.4.2009.2.9)

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2010) Micro-generation for 2050: life-cycle carbon footprint of micro-generation sources. In: 2009 44th International Universities’ Power Engineering Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-6823-2

carbon optimized virtual power plant

Skarvelis-Kazakos, Spyros, Papadopoulos, Panagiotis, Grau, Iñaki, Gerber, Annelies, Cipcigan, Liana M., Jenkins, Nick and Carradore, Loredana (2010) Carbon optimized virtual power plant with electric vehicles. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

cellular wireless communication systems

Anang, Kwashie Amartei (2013) Minimum cell size for information capacity increase in cellular wireless network. PhD thesis, University of Greenwich.

cement-based materials

Durairaj, Rajkumar, Mallik, Sabuj, Seman, Anton, Marks, Antony and Ekere, Ndy (2008) Investigation of wall-slip effect on paste release characteristic in flip-chip stencil printing process. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1328-1333. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763615)

Mallik, Sabuj, Schmidt, M., Bauer, R. and Ekere, Ndy (2008) Influence of solder paste components on rheological behaviour. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, USA, pp. 1135-1140. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684512)

Marks, A.E., Mallik, S., Ekere, N.N. and Seman, A. (2008) Effect of temperature on slumping behaviour of lead-free solder paste and its rheological simulation. 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 829-832. ISBN 97814244-28137 (Print), 978-1-4244-2814-4 (Electronic) (doi:10.1109/ESTC.2008.4684459)

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) Development of an in-situ, non-destructive ultrasonic monitoring technique for solder pastes. 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 209-214. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684351)

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) In-situ non-destructive ultrasonic rheology technique for monitoring different lead-free solder pastes for surface mount applications. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1448-1454. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763635)

centrifugal-accelerator erosion tester

Deng, T., Bingley, M.S., Bradley, M.S.A. and De Silva, S.R. (2008) A comparison of the gas-blast and centrifugal-accelerator erosion testers: The influence of particle dynamics. Wear, 265 (7-8). pp. 945-955. ISSN 0043-1648 (doi:10.1016/j.wear.2008.02.017)

CFD

Jones, Mark G. (1988) The influence of bulk particulate properties on pneumatic conveying performance. PhD thesis, Thames Polytechnic.

change management

Fei, Genyuan (2011) A methodology for engineering design change analysis using system modelling and knowledge management technologies. PhD thesis, University of Greenwich.

characteristics

Arokiam, A. C., Barashev, A. V., Bacon, D. J. and Osetsky, Yu. N. (2006) Characteristics of the interaction of Cu-rich precipitates with irradiation-produced defects in α-Fe. Philosophical Magazine Letters, 85 (9). pp. 491-501. ISSN 0950–0839 (Print), 1362–3036 (Online) (doi:10.1080/09500830500300047)

charging equipment

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Awad, B., Cipcigan, L.M. and Jenkins, N. (2010) Impact of residential charging of electric vehicles on distribution networks, a probabilistic approach. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

chip

Ekpu, Mathias, Bhatti, Raj, Okereke, M.I., Mallik, Sabuj and Otiaba, Kenny (2013) The effect of thermal constriction on heat management in a microelectronic application. Microelectronics Journal, 45 (2). 159 - 166. ISSN 0026-2692 (doi:10.1016/j.mejo.2013.10.011)

chip-scale packaged power device

Otiaba, K.C., Bhatti, R.S., Ekere, N.N., Mallik, S., Amalu, E.H. and Ekpu, M. (2011) Thermal effects of die-attach voids location and style on performance of chip level package. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 231-236. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145176)

choke-slot

Callaghan, Peter, Sagor, Md. Hasanuzzaman and Batchelor, John C. (2011) Control of ground plane influence on antenna radiation pattern for mobile handheld devices. In: 2011 Loughborough Antennas and Propagation Conference (LAPC). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-4. ISBN 978-1-4577-1014-8 (doi:10.1109/LAPC.2011.6114127)

circuit breaker

Gandhi Jeyaraj, S. and Habtay, Yehdego (2011) Effective and efficient circuit breaker analysis. IET 2011 Conference on Reliability of Transmission and Distribution Networks (RTDN 2011). pp. 1-6. (doi:10.1049/cp.2011.0532)

closed loop supply chains

Piorkowski, Barry, Gao, James and Evans, Richard (2011) A case-study: finding references to product development knowledge from analysis of face-to-face meetings. In: Glocalized Solutions for Sustainability in Manufacturing Proceedings of the 18th CIRP International Conference on Life Cycle Engineering. Springer, New York, USA, pp. 564-569. ISBN 978-3642196911 (doi:10.1007/978-3-642-19692-8-98)

coal

Khan, Naushad Salim (2008) Handling characteristics of coal/biomass mixes: measurements and establishing benchmarks. PhD thesis, University of Greenwich.

Pillai, John (2009) Direct on-line measurement of wall friction of coal as an indicator of handleability. PhD thesis, University of Greenwich.

coefficient of thermal expansion

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy and Mallik, Sabuj (2011) Advanced thermal management materials for heat sinks used in microelectronics. In: EMPC-2011: 18th European Microelectronics and Packaging Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-8. ISBN 9781467306942

Coefficient test equipment

Bradley, Michael, Bingley, Mark and Mengistu, Samuel (2004) Frictional characteristics of steel plates during abrasive particle flow: A comparison of in situ measurements made on a linear abrasive wear tester with those on a Jenike shear tester Jenike shear tester. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 218 (4). pp. 221-235. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/0954408042466963)

cogeneration

Skarvelis-Kazakos, Spyros, Papadopoulos, Panagiotis, Grau, Iñaki, Gerber, Annelies, Cipcigan, Liana M., Jenkins, Nick and Carradore, Loredana (2010) Carbon optimized virtual power plant with electric vehicles. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

cognitive radio

Arshad, Kamran (2008) Opportunistic spectrum access for cognitive radio. In: Seminar on Opportunistic Spectrum Access for Cognitive Radio, 30 Dec 2008, GIFT University, Gujranwala, Pakistan. (Unpublished)

collaborative networks

Cheung, W.M., Matthews, P.C., Gao, J.X. and Maropoulos, P.G. (2008) Advanced product development integration architecture: an out-of-box solution to support distributed production networks. International Journal of Production Research, 46 (12). pp. 3185-3206. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:10.1080/00207540601039767)

collaborative product development

Gao, James, Cheung, W.M., Bramall, D.G., Maropoulos, Paul G. and Aziz, Hayder (2006) Organizational knowledge encapsulation and re-use in collaborative product development. International Journal of Computer Integrated Manufacturing, 19 (7). pp. 736-750. ISSN 0951-192X (doi:10.1080/09511920500504479)

collabvoration

Tavakolikhou, Mehdi (2013) A knowledge sharing framework to support rapid prototyping in collaborative automotive supply chain. PhD thesis, University of Greenwich.

combined cycle gas turbine

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2010) Micro-generation for 2050: life-cycle carbon footprint of micro-generation sources. In: 2009 44th International Universities’ Power Engineering Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-6823-2

combined cycle power stations

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2010) Micro-generation for 2050: life-cycle carbon footprint of micro-generation sources. In: 2009 44th International Universities’ Power Engineering Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-6823-2

compensation

Ali, M. Tanseer, Wu, Ruiheng, Callaghan, Peter and Rapajic, Predrag (2014) Highly linear RF amplifier design: theoretical analysis and experimental study. International Journal of Electronics, 101 (1). pp. 98-112. ISSN 0020-7217 (Print), 1362-3060 (Online) (doi:10.1080/00207217.2013.769189)

computer based teaching

Beams, Rodney and Coutroubis, Alec (2008) The use of computer based teaching (CBT) in the training of marine engineers. In: 2nd International Scientific Maritime Conference - Human Resources in the Shipping Industry: New Trends and Challenges in the 21st Century, 21-22 November 2008, Limassol. (Unpublished)

Coutroubis, Alexander and Beams, Rodney (2007) The use of computer based training (CBT) in the training of marine engineers. In: LMA 9th International Conference Maritime Transport and Infrastructure-2007, 19-20 April 2007, Riga, Latvia. (Unpublished)

computer modelling

Angulo Pinzon, Oscar Andres (2012) Modelling of dosator filling and discharge. PhD thesis, University of Greenwich.

Than Soe, Muang (2013) Vibration-based finite element model updating and structural damage identification. PhD thesis, University of Greenwich.

computer networks

Ma, Mingchao (2007) Distributed RBAC for subscription-based remote network services. PhD thesis, University of Greenwich.

computer simulation

Bello, Lawal (2013) Power conservation and performance analysis of mobile ad hoc wireless networks. PhD thesis, University of Greenwich.

computer-aided process planning

Gao, James and Sharma, R. (2007) A knowledge-based manufacturing and cost evaluation system for product design/re-design. The International Journal of Advanced Manufacturing Technology, 33 (9-10). pp. 856-865. ISSN 0268-3768 (doi:10.1007/s00170-006-0530-6)

conceptual design

Gao, James and Sharma, R. (2007) A knowledge-based manufacturing and cost evaluation system for product design/re-design. The International Journal of Advanced Manufacturing Technology, 33 (9-10). pp. 856-865. ISSN 0268-3768 (doi:10.1007/s00170-006-0530-6)

concrete cracking

Yang, Shangtong (2010) Concrete crack width under combined reinforcement corrosion and applied load. PhD thesis, University of Greenwich.

construction

Kilic, Gokhan (2012) Application of advanced non-destructive testing methods on bridge health assessment and analysis. PhD thesis, University of Greenwich.

continuous improvements

Piorkowski, B.A., Evans, R.D. and Gao, J.X. (2011) Development of a face-to-face meeting capture and indexing process. In: Proceedings of the 2011 15th International Conference on Computer Supported Cooperative Work in Design, CSCWD2011. IEEE Computer Society, Piscataway, NJ, USA, pp. 4-8. ISBN 9781457703867 (doi:10.1109/CSCWD.2011.5960047)

continuum mechanics

Amalu, Emeka Hyginus (2012) Modelling of the reliability of flip chip lead-free solder joints at high-temperature excursions. PhD thesis, University of Greenwich.

control concepts

Ferdowsi, Mohsen, Grau Unda, Iñaki, Karfopoulos, Evangelos, Papadopoulos, Panagiotis, Skarvelis-Kazakos, Spyros, Cipcigan, Liana, Raab, Andreas F., Dimeas, Aris, Abbasi, Ehsan and Strunz, Kai (2010) Controls and EV aggregation for virtual power plants. Project Report. MERGE.

Moreira, C.L., Rua, David, Karfopoulos, E., Zountouridou, E., Soares, F.J., Bourithi, I., Grau, I., Peças Lopes, J.A., Cipcigan, L.M., Seca, Luis, Moschakis, Marios, Rocha Almeida, P.M., Moutis, P., Papadopoulos, P., Rei, R.J., Bessa, Ricardo J. and Skarvelis-Kazakos, S. (2010) Extend concepts of MG by identifying several EV smart control approaches to be embedded in the Smart Grid concept to manage EV individually or in clusters. Project Report. MERGE.

conveying systems

Hettiaratchi, Kaushika (2006) A comparison between the pressure gradients in vertical and horizontal pneumatic conveying, with an investigation into the effect of pipeline bore in vertical conveying. PhD thesis, University of Greenwich.

copper

Arokiam, A. C., Barashev, A. V., Bacon, D. J. and Osetsky, Yu. N. (2006) Characteristics of the interaction of Cu-rich precipitates with irradiation-produced defects in α-Fe. Philosophical Magazine Letters, 85 (9). pp. 491-501. ISSN 0950–0839 (Print), 1362–3036 (Online) (doi:10.1080/09500830500300047)

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy, Mallik, Sabuj, Amalu, Emeka and Otiaba, Kenny (2011) Investigation of effects of heat sinks on thermal performance of microelectronic package. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 127-132. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145164)

cost

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy and Mallik, Sabuj (2011) Advanced thermal management materials for heat sinks used in microelectronics. In: EMPC-2011: 18th European Microelectronics and Packaging Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-8. ISBN 9781467306942

coupling analysis

Gao, James, Fei, Genyuan and Tang, X.Q. (2009) A TRIZ based methodology for the analysis of the coupling problems in complex engineering design. In: Proceedings of the 19th CIRP Design Conference – Competitive Design. Cranfield University Press, Cranfield University, pp. 285-292. ISBN 9780955743641

CQI feedback

Arshad, Kamran (2015) LTE system level performance in the presence of CQI feedback uplink delay and mobility. In: International Conference on Communications, Signal Processing, and their Applications (ICCSPA), 2015. IEEE, pp. 1-5. ISBN 978-1-4799-6532-8 (doi:10.1109/ICCSPA.2015.7081294)

creep

Durairaj, Rajkumar, Mallik, Sabuj and Ekere, Ndy (2008) Solder paste characterisation: towards the development of quality control (QC) tool. Soldering & Surface Mount Technology, 20 (3). pp. 34-40. ISSN 0954-0911 (doi:10.1108/09540910810885705)

Mallik, Sabuj, Ekere, Ndy, Durairaj, Rajkumar and Marks, Antony (2008) An investigation into the rheological properties of different lead-free solder pastes for surface mount applications. Soldering & Surface Mount Technology, 20 (2). pp. 3-10. ISSN 0954-0911 (doi:1108/09540910810871511)

creep-recovery

Ekere, N and Mallik, Sabuj (2008) A methodology for characterising new lead-free solder paste formulations used for flip-chip assembly applications. In: Kobayashi, Akira, (ed.) Smart processing technology: SPT '07. High Temperature Society of Japan, Ibaraki, Japan, pp. 59-64.

cryptographic frameworks

Adekunle, Andrew A. (2012) Design and analysis of light-weight symmetric cryptographic frameworks and constructs for secure packet mode wireless communication. PhD thesis, University of Greenwich.

cryptography

Adekunle, Andrew A. (2012) Design and analysis of light-weight symmetric cryptographic frameworks and constructs for secure packet mode wireless communication. PhD thesis, University of Greenwich.

Cu-rich

Arokiam, A. C., Barashev, A. V., Bacon, D. J. and Osetsky, Yu. N. (2006) Characteristics of the interaction of Cu-rich precipitates with irradiation-produced defects in α-Fe. Philosophical Magazine Letters, 85 (9). pp. 491-501. ISSN 0950–0839 (Print), 1362–3036 (Online) (doi:10.1080/09500830500300047)

cultural change

Bhatti, Rajinderpal and Berkhauer-Smith, Samantha (2007) Integrating both technical and cultural aspects of process improvement. In: 5th International Conference on Manufacturing Research (ICMR 2007), 11- 13 September 2007, De Montfort University Leicester. (Unpublished)

customer-driven

Soroka, A.J. and Hieu, L.C. (2011) Design challenges for implementing a customer driven mass-customisation system. In: Proceedings - INDIN 2011: 2011 9th IEEE International Conference on Industrial Informatics. Institute of Electrical and Electronics Engineers Inc, Piscataway, USA, pp. 857-862. ISBN 9781457704338 (Online), 9781457704352 (Print) (doi:10.1109/INDIN.2011.6035005)

customisation

Mwinkuka, T., Hinduja, S. and Owodunni, Oladele (2007) Extendible operation sequencing for turn-milled components. CIRP Annals - Manufacturing Technology, 56 (1). pp. 473-478. ISSN 0007-8506 (doi:10.10.1016/j.cirp.2007.05.113)

data communication

Adekunle, Andrew A. (2012) Design and analysis of light-weight symmetric cryptographic frameworks and constructs for secure packet mode wireless communication. PhD thesis, University of Greenwich.

DC-DC converter

Naayagi, R.T., Forsyth, A.J. and Shuttleworth, R. (2011) Performance analysis of DAB DC-DC converter under zero voltage switching. In: Proceedings of the 2011 1st International Conference on Electrical Energy Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineering, Inc., Piscataway, NJ, USA, pp. 56-61. ISBN 9781612843780 (doi:10.1109/ICEES.2011.5725302)

DCE

Chen, Li Choo (2007) Optimisation of rule-based testing for scheduling within a distributed computing environment. PhD thesis, University of Greenwich.

DCM

Gandhi Jeyaraj, S. and Habtay, Yehdego (2011) Effective and efficient circuit breaker analysis. IET 2011 Conference on Reliability of Transmission and Distribution Networks (RTDN 2011). pp. 1-6. (doi:10.1049/cp.2011.0532)

Delays

Arshad, Kamran (2015) LTE system level performance in the presence of CQI feedback uplink delay and mobility. In: International Conference on Communications, Signal Processing, and their Applications (ICCSPA), 2015. IEEE, pp. 1-5. ISBN 978-1-4799-6532-8 (doi:10.1109/ICCSPA.2015.7081294)

demand response

Daniel, Simon, Skarvelis-Kazakos, Spryos and Jain, Priyanka (2013) Local smart DC networks and distributed storage for reducing and shifting peak load. In: 22nd International Conference on Electricity Distribution. IET/CIRED, Stockholm, Sweden.

demand side management

Daniel, Simon, Skarvelis-Kazakos, Spryos and Jain, Priyanka (2013) Local smart DC networks and distributed storage for reducing and shifting peak load. In: 22nd International Conference on Electricity Distribution. IET/CIRED, Stockholm, Sweden.

density

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy and Mallik, Sabuj (2011) Advanced thermal management materials for heat sinks used in microelectronics. In: EMPC-2011: 18th European Microelectronics and Packaging Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-8. ISBN 9781467306942

design

Baxter, David, Doultsinou, Athanasia, Roy, Rajkumar and Gao, James (2010) A life cycle model for product-service systems design. In: 5th International Conference on Digital Enterprise Technology. Publibook, Paris, France, pp. 441-456.

Baxter, David, Roy, Rajkumar, Doultsinou, Athanasia, Gao, James and Kalta, Mohamad (2009) A knowledge management framework to support product-service systems design. International Journal of Computer Integrated Manufacturing, 22 (12). pp. 1073-1088. ISSN 0951-192X (Print), 1362-3052 (Online) (doi:10.1080/09511920903207464)

Eadie, R. and Gao, James (2008) An industrial implementation of a methodology for the optimisation of product design tolerances. In: Kai, Cheng, Makatsoris, Harris C. and Harrison, David, (eds.) Advances in manufacturing technology XXII: the proceedings of the 6th International Conference on Manufacturing Research ICMR08, 9th-11th September 2008, London UK. Brunel University College, Brunel University, pp. 161-170. ISBN 9781902316604

design challenges

Soroka, A.J. and Hieu, L.C. (2011) Design challenges for implementing a customer driven mass-customisation system. In: Proceedings - INDIN 2011: 2011 9th IEEE International Conference on Industrial Informatics. Institute of Electrical and Electronics Engineers Inc, Piscataway, USA, pp. 857-862. ISBN 9781457704338 (Online), 9781457704352 (Print) (doi:10.1109/INDIN.2011.6035005)

design for manufacture

Baxter, David, Roy, Rajkumar, Doultsinou, Athanasia, Gao, James and Kalta, Mohamad (2009) A knowledge management framework to support product-service systems design. International Journal of Computer Integrated Manufacturing, 22 (12). pp. 1073-1088. ISSN 0951-192X (Print), 1362-3052 (Online) (doi:10.1080/09511920903207464)

Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2008) Knowledge reuse in manufacturability analysis. Robotics and Computer Integrated Manufacturing, 24 (4). pp. 508-513. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.003)

Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2009) Manufacturing knowledge verification in design support systems. International Journal of Production Research, 47 (12). pp. 3179-3204. ISSN 0020-7543 (Print), 1366–588X (Online) (doi:10.1080/00207540701802452)

design for service

Baxter, David, Roy, Rajkumar, Doultsinou, Athanasia, Gao, James and Kalta, Mohamad (2009) A knowledge management framework to support product-service systems design. International Journal of Computer Integrated Manufacturing, 22 (12). pp. 1073-1088. ISSN 0951-192X (Print), 1362-3052 (Online) (doi:10.1080/09511920903207464)

design knowledge reuse

Baxter, David, Rajkumar, Roy and Gao, James (2008) Design process knowledge reuse challenges and issues. Computer Aided Design and Applications, 5 (6). pp. 942-952. ISSN 1686-4360 (doi:10.3722/cadaps.2008.942-952)

Gao, James, Baxter, David, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2007) An engineering design knowledge reuse methodology using process modelling. Research in Engineering Design, 18 (1). pp. 37-48. ISSN 0934-9839 (doi:10.1007/s00163-007-0028-8)

design methodology

Baxter, David, Gao, James, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2008) A framework to integrate design knowledge reuse and requirements management in engineering design. Robotics and Computer-Integrated Manufacturing, 24 (4). pp. 585-593. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.010)

design process modelling

Gao, James, Zhang, Pengcheng, Baxter, David and Kalta, Mo (2007) Developing a design process model for the reuse of knowledge. Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.

design process support

Baxter, David, Rajkumar, Roy and Gao, James (2008) Design process knowledge reuse challenges and issues. Computer Aided Design and Applications, 5 (6). pp. 942-952. ISSN 1686-4360 (doi:10.3722/cadaps.2008.942-952)

design requirements

Doultsinou, Athanasia, Roy, Rajkumar, Baxter, David, Gao, James and Mann, Andy (2009) Developing a service knowledge reuse framework for engineering design. Journal of Engineering Design, 20 (4). pp. 389-411. ISSN 0954-4828 (Print), 1466-1837 (Online) (doi:10.1080/09544820903149354)

design reuse

Baxter, David, Gao, James, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2008) A framework to integrate design knowledge reuse and requirements management in engineering design. Robotics and Computer-Integrated Manufacturing, 24 (4). pp. 585-593. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.010)

Gao, James, Zhang, Pengcheng, Baxter, David and Kalta, Mo (2007) Developing a design process model for the reuse of knowledge. Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.

design support

Baxter, David, Gao, James, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2008) A framework to integrate design knowledge reuse and requirements management in engineering design. Robotics and Computer-Integrated Manufacturing, 24 (4). pp. 585-593. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.010)

differential amplifiers

Wu, Ruiheng, Lidgey, F.J., Hayatleh, K. and Hart, B.L. (2010) Differential amplifier with improved gain-accuracy and linearity. Interntional Journal of Circuit Theory and Applications, 38 (8). pp. 829-844. ISSN 0098-9886 (doi:10.1002/cta.601)

digital communication systems

Eneh, T., Rapajic, P., Anang, K., Bakalis, P. and Bello, L. (2012) Information capacity of adaptive MIMO OFDM wireless communication systems. In: Adaptive Science and Technology (ICAST). Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 157-164. ISBN 978-1-4673-0758-1 (doi:10.1109/ICASTech.2011.6145168)

direct mount snubber

Naayagi, R.T., Shuttleworth, R. and Forsyth, A.J. (2011) Investigating the effect of snubber capacitor on high power IGBT turn-off. In: Proceedings of the 2011 1st International Conference on Electrical Energy Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineering, Inc., Piscataway, NJ, USA, pp. 50-55. ISBN 9781612843780 (doi:10.1109/ICEES.2011.5725301)

disassembly

Piorkowski, Barry, Gao, James and Evans, Richard (2011) A case-study: finding references to product development knowledge from analysis of face-to-face meetings. In: Glocalized Solutions for Sustainability in Manufacturing Proceedings of the 18th CIRP International Conference on Life Cycle Engineering. Springer, New York, USA, pp. 564-569. ISBN 978-3642196911 (doi:10.1007/978-3-642-19692-8-98)

distance sensors

Seals, Richard and Eissa, Hazem (2016) Optimising data extraction from one dimensional distance sensors. In: The First Medway Engineering Conference on Systems: Efficiency, Sustainability and Modelling, 6th June 2016, University of Greenwich. (Submitted)

Distributed Computing Environment

Chen, Li Choo (2007) Optimisation of rule-based testing for scheduling within a distributed computing environment. PhD thesis, University of Greenwich.

distributed control

Raab, A. F., Ferdowsi, M., Karfopoulos, E., Unda, I. Grau, Skarvelis-Kazakos, S., Papadopoulos, P., Abbasi, E., Cipcigan, L.M., Jenkins, N., Hatziargyriou, N. and Strunz, K. (2011) Virtual power plant control concepts with electric vehicles. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082214)

distributed control approach

Raab, A. F., Ferdowsi, M., Karfopoulos, E., Unda, I. Grau, Skarvelis-Kazakos, S., Papadopoulos, P., Abbasi, E., Cipcigan, L.M., Jenkins, N., Hatziargyriou, N. and Strunz, K. (2011) Virtual power plant control concepts with electric vehicles. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082214)

distributed energy resources

Karfopoulos, Evangelos L., Papadopoulos, Panagiotis, Skarvelis-Kazakos, Spyros, Grau, Inaki, Cipcigan, Liana M., Hatziargyriou, Nikos and Jenkins, Nick (2011) Introducing electric vehicles in the microgrids concept. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082212)

Raab, A. F., Ferdowsi, M., Karfopoulos, E., Unda, I. Grau, Skarvelis-Kazakos, S., Papadopoulos, P., Abbasi, E., Cipcigan, L.M., Jenkins, N., Hatziargyriou, N. and Strunz, K. (2011) Virtual power plant control concepts with electric vehicles. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082214)

distributed generation

Grau Unda, I., Papadopoulos, P., Skarvelis-Kazakos, S., Cipcigan, L.M. and Jenkins, N. (2011) Energy storage for balancing a local distribution network area. In: Carbone, Rosario, (ed.) Energy Storage in the Emerging Era of Smart Grids. InTech, New York, USA, pp. 301-320. ISBN 978-953-307-269-2 (doi:10.5772/18305)

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2012) Electric vehicles' impact on British distribution networks. IET Electrical Systems in Transportation, 2 (3). pp. 91-102. ISSN 2042-9738 (doi:10.1049/iet-est.2011.0023)

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2012) Electric vehicles' impact on British distribution networks. IET Electrical Systems in Transportation, 2 (3). pp. 91-102. ISSN 2042-9738 (doi:10.1049/iet-est.2011.0023)

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2011) Predicting Electric Vehicle impacts on residential distribution networks with distributed generation. In: 2010 IEEE Vehicle Power and Propulsion Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-8220-7 (doi:10.1109/VPPC.2010.5729009)

Skarvelis-Kazakos, Spyros, Rikos, Evangelos, Kolentini, Efstathia, Cipcigan, Liana M. and Jenkins, Nick (2013) Implementing agent-based emissions trading for controlling Virtual Power Plant emissions. Electric Power Systems Research, 102. ISSN 0378-7796 (doi:10.1016/j.epsr.2013.04.004)

distributed power generation

Grau, I., Skarvelis-Kazakos, S., Papadopoulos, P., Cipcigan, L.M. and Jenkins, N. (2010) Electric vehicles support for intentional islanding: A prediction for 2030. In: 41st North American Power Symposium. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 1-5. ISBN 978-1-4244-4428-1 (Print), 978-1-4244-4429-8 (Online) (doi:10.1109/NAPS.2009.5484016)

Raab, A. F., Ferdowsi, M., Karfopoulos, E., Unda, I. Grau, Skarvelis-Kazakos, S., Papadopoulos, P., Abbasi, E., Cipcigan, L.M., Jenkins, N., Hatziargyriou, N. and Strunz, K. (2011) Virtual power plant control concepts with electric vehicles. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082214)

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2010) Micro-generation for 2050: life-cycle carbon footprint of micro-generation sources. In: 2009 44th International Universities’ Power Engineering Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-6823-2

Skarvelis-Kazakos, Spyros, Papadopoulos, Panagiotis, Grau, Iñaki, Gerber, Annelies, Cipcigan, Liana M., Jenkins, Nick and Carradore, Loredana (2010) Carbon optimized virtual power plant with electric vehicles. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

distributed role-based access control

Ma, Mingchao (2007) Distributed RBAC for subscription-based remote network services. PhD thesis, University of Greenwich.

distributed storage

Daniel, Simon, Skarvelis-Kazakos, Spryos and Jain, Priyanka (2013) Local smart DC networks and distributed storage for reducing and shifting peak load. In: 22nd International Conference on Electricity Distribution. IET/CIRED, Stockholm, Sweden.

distribution network

Grau, I., Papadopoulos, P., Skarvelis-Kazakos, S., Cipcigan, L.M. and Jenkins, N. (2010) Virtual power plants with electric vehicles. In: 2nd European Conference on SmartGrids and E-Mobility, 20-21 Oct 2010, Brussels, Belgium. (Unpublished)

Grau Unda, I., Papadopoulos, P., Skarvelis-Kazakos, S., Cipcigan, L.M. and Jenkins, N. (2011) Energy storage for balancing a local distribution network area. In: Carbone, Rosario, (ed.) Energy Storage in the Emerging Era of Smart Grids. InTech, New York, USA, pp. 301-320. ISBN 978-953-307-269-2 (doi:10.5772/18305)

distribution networks

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Awad, B., Cipcigan, L.M. and Jenkins, N. (2010) Impact of residential charging of electric vehicles on distribution networks, a probabilistic approach. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2012) Electric vehicles' impact on British distribution networks. IET Electrical Systems in Transportation, 2 (3). pp. 91-102. ISSN 2042-9738 (doi:10.1049/iet-est.2011.0023)

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2011) Predicting Electric Vehicle impacts on residential distribution networks with distributed generation. In: 2010 IEEE Vehicle Power and Propulsion Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-8220-7 (doi:10.1109/VPPC.2010.5729009)

distribution systems

Ferdowsi, Mohsen, Grau Unda, Iñaki, Karfopoulos, Evangelos, Papadopoulos, Panagiotis, Skarvelis-Kazakos, Spyros, Cipcigan, Liana, Raab, Andreas F., Dimeas, Aris, Abbasi, Ehsan and Strunz, Kai (2010) Controls and EV aggregation for virtual power plants. Project Report. MERGE.

Moreira, C.L., Rua, David, Karfopoulos, E., Zountouridou, E., Soares, F.J., Bourithi, I., Grau, I., Peças Lopes, J.A., Cipcigan, L.M., Seca, Luis, Moschakis, Marios, Rocha Almeida, P.M., Moutis, P., Papadopoulos, P., Rei, R.J., Bessa, Ricardo J. and Skarvelis-Kazakos, S. (2010) Extend concepts of MG by identifying several EV smart control approaches to be embedded in the Smart Grid concept to manage EV individually or in clusters. Project Report. MERGE.

dosator filling machines

Angulo Pinzon, Oscar Andres (2012) Modelling of dosator filling and discharge. PhD thesis, University of Greenwich.

dosators

Angulo Pinzon, Oscar Andres (2012) Modelling of dosator filling and discharge. PhD thesis, University of Greenwich.

DRBAC

Ma, Mingchao (2007) Distributed RBAC for subscription-based remote network services. PhD thesis, University of Greenwich.

DRM

Gandhi Jeyaraj, S. and Habtay, Yehdego (2011) Effective and efficient circuit breaker analysis. IET 2011 Conference on Reliability of Transmission and Distribution Networks (RTDN 2011). pp. 1-6. (doi:10.1049/cp.2011.0532)

dual active bridge (DAB)

Naayagi, R.T., Forsyth, A.J. and Shuttleworth, R. (2011) Performance analysis of DAB DC-DC converter under zero voltage switching. In: Proceedings of the 2011 1st International Conference on Electrical Energy Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineering, Inc., Piscataway, NJ, USA, pp. 56-61. ISBN 9781612843780 (doi:10.1109/ICEES.2011.5725302)

dual ground

Gandhi Jeyaraj, S. and Habtay, Yehdego (2011) Effective and efficient circuit breaker analysis. IET 2011 Conference on Reliability of Transmission and Distribution Networks (RTDN 2011). pp. 1-6. (doi:10.1049/cp.2011.0532)

E. Weaving

Okereke, M.I., Akpoyomare, A.I. and Bingley, M.S. (2014) Virtual testing of advanced composites, cellular materials and biomaterials: A review. Composites Part B: Engineering, 60. 637 - 662. ISSN 1359-8368 (doi:10.1016/j.compositesb.2014.01.007)

EAF

Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.

Zhang, Pengcheng, Gao, James and Wang, Yinglin (2011) Requirement driven knowledge management system design to support automotive product development. International Journal of Product Lifecycle Management (IJPLM), 5 (2-4). pp. 202-223. ISSN 1743-5110 (doi:10.1504/IJPLM.2011.043188)

Effective elastic properties

Akpoyomare, A. I. and Okereke, M. I. (2013) A virtual test-bed for the prediction of holistic effective elastic properties of UD composites. In: 19th International Conference on Composite Materials (ICCM19), 28 JUL 2013 - 2 AUG 2013, Montreal, Canada.

effective properties

Okereke, M. I. and Akpoyomare, A. I. (2013) A virtual framework for prediction of full-field elastic response of unidirectional composites. Computational Materials Science, 70. pp. 82-99. ISSN 0927-0256 (Online) (doi:10.1016/j.commatsci.2012.12.036)

electric vehicle

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2012) Electric vehicles' impact on British distribution networks. IET Electrical Systems in Transportation, 2 (3). pp. 91-102. ISSN 2042-9738 (doi:10.1049/iet-est.2011.0023)

Skarvelis-Kazakos, Spyros, Papadopoulos, Panagiotis, Grau, Iñaki, Gerber, Annelies, Cipcigan, Liana M., Jenkins, Nick and Carradore, Loredana (2010) Carbon optimized virtual power plant with electric vehicles. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

electric vehicle grid integration

Raab, A. F., Ferdowsi, M., Karfopoulos, E., Unda, I. Grau, Skarvelis-Kazakos, S., Papadopoulos, P., Abbasi, E., Cipcigan, L.M., Jenkins, N., Hatziargyriou, N. and Strunz, K. (2011) Virtual power plant control concepts with electric vehicles. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082214)

Electric Vehicles

Ferdowsi, Mohsen, Grau Unda, Iñaki, Karfopoulos, Evangelos, Papadopoulos, Panagiotis, Skarvelis-Kazakos, Spyros, Cipcigan, Liana, Raab, Andreas F., Dimeas, Aris, Abbasi, Ehsan and Strunz, Kai (2010) Controls and EV aggregation for virtual power plants. Project Report. MERGE.

Grau, I., Papadopoulos, P., Skarvelis-Kazakos, S., Cipcigan, L.M. and Jenkins, N. (2010) Virtual power plants with electric vehicles. In: 2nd European Conference on SmartGrids and E-Mobility, 20-21 Oct 2010, Brussels, Belgium. (Unpublished)

Grau, I., Skarvelis-Kazakos, S., Papadopoulos, P., Cipcigan, L.M. and Jenkins, N. (2010) Electric vehicles support for intentional islanding: A prediction for 2030. In: 41st North American Power Symposium. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 1-5. ISBN 978-1-4244-4428-1 (Print), 978-1-4244-4429-8 (Online) (doi:10.1109/NAPS.2009.5484016)

Karfopoulos, Evangelos L., Papadopoulos, Panagiotis, Skarvelis-Kazakos, Spyros, Grau, Inaki, Cipcigan, Liana M., Hatziargyriou, Nikos and Jenkins, Nick (2011) Introducing electric vehicles in the microgrids concept. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082212)

Karfopoulos, Evangelos L., Papadopoulos, Panagiotis, Skarvelis-Kazakos, Spyros, Grau, Inaki, Cipcigan, Liana M., Hatziargyriou, Nikos and Jenkins, Nick (2011) Introducing electric vehicles in the microgrids concept. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082212)

Moreira, C.L., Rua, David, Karfopoulos, E., Zountouridou, E., Soares, F.J., Bourithi, I., Grau, I., Peças Lopes, J.A., Cipcigan, L.M., Seca, Luis, Moschakis, Marios, Rocha Almeida, P.M., Moutis, P., Papadopoulos, P., Rei, R.J., Bessa, Ricardo J. and Skarvelis-Kazakos, S. (2010) Extend concepts of MG by identifying several EV smart control approaches to be embedded in the Smart Grid concept to manage EV individually or in clusters. Project Report. MERGE.

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Awad, B., Cipcigan, L.M. and Jenkins, N. (2010) Impact of residential charging of electric vehicles on distribution networks, a probabilistic approach. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2012) Electric vehicles' impact on British distribution networks. IET Electrical Systems in Transportation, 2 (3). pp. 91-102. ISSN 2042-9738 (doi:10.1049/iet-est.2011.0023)

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2011) Predicting Electric Vehicle impacts on residential distribution networks with distributed generation. In: 2010 IEEE Vehicle Power and Propulsion Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-8220-7 (doi:10.1109/VPPC.2010.5729009)

Raab, A. F., Ferdowsi, M., Karfopoulos, E., Unda, I. Grau, Skarvelis-Kazakos, S., Papadopoulos, P., Abbasi, E., Cipcigan, L.M., Jenkins, N., Hatziargyriou, N. and Strunz, K. (2011) Virtual power plant control concepts with electric vehicles. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082214)

electrical engineering

Li, Ji (2007) A study of the solid particle erosion performance of automative and other novel low carbon steels. PhD thesis, University of Greenwich.

electronic control unit

Otiaba, K.C., Ekere, N.N., Amalu, E.H., Bhatti, R.S. and Mallik, S. (2012) Thermal management materials for electronic control unit: trends, processing technology and R and D challenges. Advanced Materials Research, 367. pp. 301-307. ISSN 1022-6680 (Print), 1662-8985 (Online) (doi:10.4028/www.scientific.net/AMR.367.301)

Otiaba, K.C., Ekere, N.N., Amalu, E.H., Bhatti, R.S. and Mallik, S. (2010) Thermal management materials for electronic control unit: trends, processing technology and R&D challenges. In: International Conference on Engineering Research & Development: Advances in Engineering Science & Technology, 7-9 September 2010, Benin City, Africa.

electronic materials

Mallik, S., Ekere, N.N., Marks, A.E., Seman, A. and Durairaj, R. (2010) Modeling the structural breakdown of solder paste using the structural kinetic model. Journal of Materials Engineering and Performance, 19 (1). pp. 40-45. ISSN 1059-9495 (Print), 1544-1024 (Online) (doi:10.1007/s11665-009-9448-0)

Electronic Nose

Tao, Mei and Seals, R.C. (1993) Multicomponent gas-mixture measurements using an array of gas sensors and an artificial neural-network. Journal of Microcomputer Applications, 16 (2). pp. 203-210. (doi:10.1006/jmca.1993.1018)

electronic unit

Otiaba, K.C., Ekere, N.N., Bhatti, R.S., Mallik, S., Alam, M.O. and Amalu, E.H. (2011) Thermal interface materials for automotive electronic control unit: Trends, technology and R&D challenges. Microelectronics Reliability, 51 (12). pp. 2031-2043. ISSN 0026-2714 (doi:10.1016/j.microrel.2011.05.001)

electronics assembly applications

Mallik, S., Ekere, N.N., Durairaj, R., Marks, A.E. and Seman, A. (2009) Wall-slip effects in SnAgCu solder pastes used in electronics assembly applications. Materials & Design, 30 (10). pp. 4502-4506. ISSN 0261-3069 (doi:10.1016/j.matdes.2009.05.028)

electronics manufacturing

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2007) Effect of abandon time on print quality and rheological characteristics for lead-free solder pastes used for flip-chip assembly. 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. Ieee/Cpmt International Electronics Manufacturing Technology Symposium . Institute of Electrical and Electronics Engineers, New York, USA, pp. 14-19. ISBN 9781424413355 (doi:10.1109/IEMT.2007.4417048)

electronics packaging

Salam, B. and Ekere, Ndy (2006) A study of inter-metallic compounds (IMC) formation and growth in ultra-fine pitch Sn-Ag-Cu lead-free solder joints. ESTC 2006: 1st Electronics Systemintegration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, pp. 988-994. ISBN 1424405521 (doi:10.1109/ESTC.2006.280131)

emissions

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2010) Micro-generation for 2050: life-cycle carbon footprint of micro-generation sources. In: 2009 44th International Universities’ Power Engineering Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-6823-2

emissions markets

Skarvelis-Kazakos, Spyros, Rikos, Evangelos, Kolentini, Efstathia, Cipcigan, Liana M. and Jenkins, Nick (2013) Implementing agent-based emissions trading for controlling Virtual Power Plant emissions. Electric Power Systems Research, 102. ISSN 0378-7796 (doi:10.1016/j.epsr.2013.04.004)

emulsions

Ekere, Ndy, Mallik, Sabuj, Durairaj, Rajkumar and Marks, Antony (2007) A study of the rheological properties of lead free solder paste formulations used for flip-chip interconnection. 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. IEEE/CPM International Electronics Manufacturing Technology Symposium . IEEE, New York, USA, pp. 165-171. ISBN 9781424413355 (doi:10.1109/IEMT.2007.4417065)

energy and resource efficiency and effectiveness

Piorkowski, Barry, Gao, James and Evans, Richard (2011) A case-study: finding references to product development knowledge from analysis of face-to-face meetings. In: Glocalized Solutions for Sustainability in Manufacturing Proceedings of the 18th CIRP International Conference on Life Cycle Engineering. Springer, New York, USA, pp. 564-569. ISBN 978-3642196911 (doi:10.1007/978-3-642-19692-8-98)

energy management

Karfopoulos, Evangelos L., Papadopoulos, Panagiotis, Skarvelis-Kazakos, Spyros, Grau, Inaki, Cipcigan, Liana M., Hatziargyriou, Nikos and Jenkins, Nick (2011) Introducing electric vehicles in the microgrids concept. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082212)

Raab, A. F., Ferdowsi, M., Karfopoulos, E., Unda, I. Grau, Skarvelis-Kazakos, S., Papadopoulos, P., Abbasi, E., Cipcigan, L.M., Jenkins, N., Hatziargyriou, N. and Strunz, K. (2011) Virtual power plant control concepts with electric vehicles. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082214)

energy storage

Grau Unda, I., Papadopoulos, P., Skarvelis-Kazakos, S., Cipcigan, L.M. and Jenkins, N. (2011) Energy storage for balancing a local distribution network area. In: Carbone, Rosario, (ed.) Energy Storage in the Emerging Era of Smart Grids. InTech, New York, USA, pp. 301-320. ISBN 978-953-307-269-2 (doi:10.5772/18305)

engineering and management

Piorkowski, Barry, Gao, James and Evans, Richard (2011) A case-study: finding references to product development knowledge from analysis of face-to-face meetings. In: Glocalized Solutions for Sustainability in Manufacturing Proceedings of the 18th CIRP International Conference on Life Cycle Engineering. Springer, New York, USA, pp. 564-569. ISBN 978-3642196911 (doi:10.1007/978-3-642-19692-8-98)

engineering design

Baxter, David, Gao, James, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2008) A framework to integrate design knowledge reuse and requirements management in engineering design. Robotics and Computer-Integrated Manufacturing, 24 (4). pp. 585-593. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.010)

Fei, Genyuan (2011) A methodology for engineering design change analysis using system modelling and knowledge management technologies. PhD thesis, University of Greenwich.

enterprise architecture framework

Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.

Zhang, Pengcheng and Gao, James (2010) Requirements driven knowledge system design for product development. In: Proceedings of the 6th CIRP-Sponsored International Conference on Digital Enterprise Technology. Advances in Intelligent and Soft Computing, 66/201 . Springer, Hong Kong, pp. 169-184. ISBN 9783642104299 ISSN 1867-5662 (doi:10.1007/978-3-642-10430-5_13)

Zhang, Pengcheng, Gao, James and Wang, Yinglin (2011) Requirement driven knowledge management system design to support automotive product development. International Journal of Product Lifecycle Management (IJPLM), 5 (2-4). pp. 202-223. ISSN 1743-5110 (doi:10.1504/IJPLM.2011.043188)

enterprise integration

Gao, James, Baxter, David and Roy, Rajkumar (2009) Managing knowledge within the manufacturing enterprise: an overview. International Journal of Manufacturing Technology and Management (IJMTM), 18 (2). pp. 183-209. ISSN 1368-2148 (doi:10.1504/IJMTM.2009.026193)

enterprise knowledge

Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.

Zhang, Pengcheng, Gao, James and Wang, Yinglin (2011) Requirement driven knowledge management system design to support automotive product development. International Journal of Product Lifecycle Management (IJPLM), 5 (2-4). pp. 202-223. ISSN 1743-5110 (doi:10.1504/IJPLM.2011.043188)

enterprise knowledge search

Jian, Guo (2011) Knowledge search for new product development: a multi-agent based methodology. PhD thesis, University of Greenwich.

enterprise modelling

Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2008) Knowledge reuse in manufacturability analysis. Robotics and Computer Integrated Manufacturing, 24 (4). pp. 508-513. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.003)

Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2009) Manufacturing knowledge verification in design support systems. International Journal of Production Research, 47 (12). pp. 3179-3204. ISSN 0020-7543 (Print), 1366–588X (Online) (doi:10.1080/00207540701802452)

environmental dispatch

Skarvelis-Kazakos, Spyros, Papadopoulos, Panagiotis, Grau, Iñaki, Gerber, Annelies, Cipcigan, Liana M., Jenkins, Nick and Carradore, Loredana (2010) Carbon optimized virtual power plant with electric vehicles. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

environmental economics

Raab, A. F., Ferdowsi, M., Karfopoulos, E., Unda, I. Grau, Skarvelis-Kazakos, S., Papadopoulos, P., Abbasi, E., Cipcigan, L.M., Jenkins, N., Hatziargyriou, N. and Strunz, K. (2011) Virtual power plant control concepts with electric vehicles. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082214)

erosion

Deng, Tong, Bingley, Mark S. and Bradley, Michael S. A. (2004) The influence of particle rotation on the solid particle erosion rate of metals. Wear, 256 (11-12). pp. 1037-1049. ISSN 0043-1648 (doi:10.1016/S0043-1648(03)00536-2)

Erosive wear

Lakshman, Biju, Deng, Tong, Bradley, Michael S. A., Okereke, Michael and McIlhagger, A. T. (2014) Erosive wear of polymer composite materials and its correlation with high strain rate mechanical properties. In: 2nd International Conference on Abrasive Processes - ICAP 2014 (Programme and Abstract Book). ICAP, Cambridge, United Kingdom, p. 24.

EV grid integration

Raab, A. F., Ferdowsi, M., Karfopoulos, E., Unda, I. Grau, Skarvelis-Kazakos, S., Papadopoulos, P., Abbasi, E., Cipcigan, L.M., Jenkins, N., Hatziargyriou, N. and Strunz, K. (2011) Virtual power plant control concepts with electric vehicles. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082214)

face-to-face meetings

Piorkowski, B.A., Evans, R.D. and Gao, J.X. (2011) Development of a face-to-face meeting capture and indexing process. In: Proceedings of the 2011 15th International Conference on Computer Supported Cooperative Work in Design, CSCWD2011. IEEE Computer Society, Piscataway, NJ, USA, pp. 4-8. ISBN 9781457703867 (doi:10.1109/CSCWD.2011.5960047)

fatigue

Ekpu, Mathias, Bhatti, Raj, Okereke, Michael I., Mallik, Sabuj and Otiaba, Kenny (2013) Fatigue life of lead-free solder thermal interface materials at varying bond line thickness in microelectronics. Microelectronics Reliability, 54 (1). 239 - 244. ISSN 0026-2714 (doi:10.1016/j.microrel.2013.08.006)

fatigue failure

Amalu, E.H., Ekere, N.N., Bhatti, R.S., Mallik, S., Takyi, G. and Ibhadode, A.O.A. (2011) Numerical investigation of thermo-mechanical behaviour of ball grid array solder joint at high temperature excursion. Advanced Materials Research, 367. pp. 287-292. ISSN 1662-8985 (Print), 1022-6680 (Online) (doi:10.4028/www.scientific.net/AMR.367.287)

fibre reinforced composites

Akpoyomare, A. I. and Okereke, M. I. (2013) A virtual test-bed for the prediction of holistic effective elastic properties of UD composites. In: 19th International Conference on Composite Materials (ICCM19), 28 JUL 2013 - 2 AUG 2013, Montreal, Canada.

file type

Chowdary, Boppana V., Sahatoo, Divesh R. and Bhatti, Raj (2007) Some STL file generation issues in rapid prototyping. In: Esparragoza, Ivan E., Bermudez, Manuel and Petrie, Maria Larrondo, (eds.) 5th Latin American and Caribbean Conference for Engineering and Technology Developing Entrepreneural Engineers for the Sustainable Growth of Latin American and Caribbean: Education, Innovation, Technology, and Practice. Latin American and Caribbean Consortium of Engineering Institutions, Florida. ISBN 098228960X

filters

Kessel, Stephen Ronald (1985) The interaction between rotary valves and pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

finite element analysis

Arshad, Kamran (2010) Radio wave propagation modelling using finite element method: Novel approaches to model radio wave propagation and solve complex models efficiently using finite element analysis. LAP Lambert Academic Publishing. ISBN 9783843358019

finite element analysis (FEA)

Akpoyomare, A. I. and Okereke, M. I. (2013) A virtual test-bed for the prediction of holistic effective elastic properties of UD composites. In: 19th International Conference on Composite Materials (ICCM19), 28 JUL 2013 - 2 AUG 2013, Montreal, Canada.

Amalu, E.H, Ekere, N.N. and Aminu, G. (2011) Effects of inter-metallic compound on high temperature reliability of flip chip interconnects for fine pitch applications. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 208-213. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145173)

finite element modelling (FEM)

Kilic, Gokhan (2012) Application of advanced non-destructive testing methods on bridge health assessment and analysis. PhD thesis, University of Greenwich.

finite element updating

Than Soe, Muang (2013) Vibration-based finite element model updating and structural damage identification. PhD thesis, University of Greenwich.

firepolishing

Mayur, Yaul, Bhatti, Rajinderpal and Lawrence, Stephen (2008) Evaluating the process of borosilicate glass capillaries used for fabrication of in-vitro fertilization (IVF) micro-pipettes. Biomedical Microdevices, 10 (1). pp. 123-128. ISSN 1387-2176 (doi:10.1007/s10544-007-9117-8)

first year engineering

Seals, Richard (2016) Stimulating the student through experimental activity. In: SHIFT16 : Annual Festival of Learning and Teaching, 8th January 2016, University of Greenwich.

flip chip

Amalu, Emeka H., Lui, Y.T., Ekere, Ndy, Bhatti, R.S. and Takyi, G. (2011) Investigation of the effects of reflow profile parameters on lead-free solder bump volumes and joint integrity. In: AIP Conference Proceedings. American Institute of Physics, Melville, NY, USA, pp. 639-644. (doi:10.1063/1.3552519)

flip chip (FC)

Amalu, E.H, Ekere, N.N. and Aminu, G. (2011) Effects of inter-metallic compound on high temperature reliability of flip chip interconnects for fine pitch applications. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 208-213. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145173)

flip chip assembly

Ekere, N and Mallik, Sabuj (2008) A methodology for characterising new lead-free solder paste formulations used for flip-chip assembly applications. In: Kobayashi, Akira, (ed.) Smart processing technology: SPT '07. High Temperature Society of Japan, Ibaraki, Japan, pp. 59-64.

flip-chip

Durairaj, R., Mallik, S., Seman, A., Marks, A. and Ekere, N.N. (2009) Rheological characterisation of solder pastes and isotropic conductive adhesives used for flip-chip assembly. Journal of Materials Processing Technology, 209 (8). pp. 3923-3930. ISSN 0924-0136 (doi:10.1016/j.jmatprotec.2008.09.013)

flip-chip assemblies

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2007) Effect of abandon time on print quality and rheological characteristics for lead-free solder pastes used for flip-chip assembly. 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. Ieee/Cpmt International Electronics Manufacturing Technology Symposium . Institute of Electrical and Electronics Engineers, New York, USA, pp. 14-19. ISBN 9781424413355 (doi:10.1109/IEMT.2007.4417048)

flip-chip assembly

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2008) Effect of long-term aging on the rheological characteristics and printing performance of lead-free solder pastes used for flip-chip assembly. Smart Processing Technology, 2. pp. 131-134.

Mallik, Sabuj (2009) Study of the time-dependent rheological behaviour of lead-free solder pastes and flux mediums used for flip-chip assembly applications. PhD thesis, University of Greenwich.

flip-chip assembly applications

Mallik, Sabuj, Ekere, Ndy, Marks, Antony, Seman, Anton and Durairaj, Rajkumar (2008) Modelling of the time-dependent flow behaviour of lead-free solder pastes used for flip-chip assembly applications. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 1219-1224. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684527)

flipchips

Mallik, S., Schmidt, M., Bauer, R. and Ekere, N.N. (2010) Evaluating solder paste behaviours through rheological test methods and their correlation to the printing performance. Soldering & Surface Mount Technology, 22 (4). pp. 42-49. ISSN 0954-0911 (doi:10.1108/09540911011076871)

flow

Ekere, Ndy, Mallik, Sabuj, Durairaj, Rajkumar and Marks, Antony (2007) A study of the rheological properties of lead free solder paste formulations used for flip-chip interconnection. 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. IEEE/CPM International Electronics Manufacturing Technology Symposium . IEEE, New York, USA, pp. 165-171. ISBN 9781424413355 (doi:10.1109/IEMT.2007.4417065)

flow property measurement

Khan, Naushad Salim (2008) Handling characteristics of coal/biomass mixes: measurements and establishing benchmarks. PhD thesis, University of Greenwich.

fluid mechanics

Jones, Mark G. (1988) The influence of bulk particulate properties on pneumatic conveying performance. PhD thesis, Thames Polytechnic.

Kessel, Stephen Ronald (1985) The interaction between rotary valves and pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

flux

Durairaj, Rajkumar, Mallik, Sabuj and Ekere, Ndy (2008) Solder paste characterisation: towards the development of quality control (QC) tool. Soldering & Surface Mount Technology, 20 (3). pp. 34-40. ISSN 0954-0911 (doi:10.1108/09540910810885705)

Mallik, Sabuj (2009) Study of the time-dependent rheological behaviour of lead-free solder pastes and flux mediums used for flip-chip assembly applications. PhD thesis, University of Greenwich.

food production

Ermis, Ertan (2011) Establishment of a repeatable test procedure for measuring adhesion strength of particulates in contact with surfaces. PhD thesis, University of Greenwich.

foundry

Shehu, T. and Bhatti, R.S. (2012) The use of Yam flour (starch) as binder for sand mould production in Nigeria. World Applied Sciences Journal, 16 (6). pp. 858-862. ISSN 1818-495 (doi:wasj/wasj16(6)12/14.pdf)

FR4 substrate

Callaghan, Peter, Sagor, Md. Hasanuzzaman and Batchelor, John C. (2011) Control of ground plane influence on antenna radiation pattern for mobile handheld devices. In: 2011 Loughborough Antennas and Propagation Conference (LAPC). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-4. ISBN 978-1-4577-1014-8 (doi:10.1109/LAPC.2011.6114127)

fractures

Moorman, John Everard (2005) A method for the probabilistic method assessment of structures containing defects. PhD thesis, University of Greenwich.

Friction

Bradley, Michael, Bingley, Mark and Mengistu, Samuel (2004) Frictional characteristics of steel plates during abrasive particle flow: A comparison of in situ measurements made on a linear abrasive wear tester with those on a Jenike shear tester Jenike shear tester. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 218 (4). pp. 221-235. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/0954408042466963)

friction factor

Pillai, John (2009) Direct on-line measurement of wall friction of coal as an indicator of handleability. PhD thesis, University of Greenwich.

gain

Ali, M. Tanseer, Wu, Ruiheng, Callaghan, Peter and Rapajic, Predrag (2014) Highly linear RF amplifier design: theoretical analysis and experimental study. International Journal of Electronics, 101 (1). pp. 98-112. ISSN 0020-7217 (Print), 1362-3060 (Online) (doi:10.1080/00207217.2013.769189)

gain-accuracy

Wu, Ruiheng, Lidgey, F.J., Hayatleh, K. and Hart, B.L. (2010) Differential amplifier with improved gain-accuracy and linearity. Interntional Journal of Circuit Theory and Applications, 38 (8). pp. 829-844. ISSN 0098-9886 (doi:10.1002/cta.601)

gas sensors

Tao, Mei and Seals, R.C. (1993) Multicomponent gas-mixture measurements using an array of gas sensors and an artificial neural-network. Journal of Microcomputer Applications, 16 (2). pp. 203-210. (doi:10.1006/jmca.1993.1018)

gas turbine power stations

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2010) Micro-generation for 2050: life-cycle carbon footprint of micro-generation sources. In: 2009 44th International Universities’ Power Engineering Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-6823-2

gas-blast erosion tester

Deng, T., Bingley, M.S., Bradley, M.S.A. and De Silva, S.R. (2008) A comparison of the gas-blast and centrifugal-accelerator erosion testers: The influence of particle dynamics. Wear, 265 (7-8). pp. 945-955. ISSN 0043-1648 (doi:10.1016/j.wear.2008.02.017)

Geometry

Akpoyomare, Ambrose I., Okereke, Michael, Bingley, Mark, McIlhagger, A. T. and Archer, E. (2015) Virtual geometric realization of woven textile composites. In: Proceedings of 20th International Conference on Composite Materials. ICCM, Copenhagen, Denmark.

global product development

Gao, James, Bradfield, Daniel J. and Soltan, Hossein (2007) A metaknowledge approach to facilitate knowledge sharing in the global product development process. Computer-Aided Design and Applications, 4 (1-4). pp. 519-528. ISSN 1686-4360 (doi:10.3722/cadaps.2007.519-528)

Greece

Koufopoulos, Dimitrios N., Coutroubis, Alec and Lagoudis, Ioannis N. (2007) One size does not fit all: revisiting conceptual wisdom by assessing corporate governance practices of the Greek shipping management companies. In: International Association of Maritime Economists, IAME, Greece Challenges and Trends in Shipping, Markets, Investments and Policies, 4-6 July 2007, Athens. (Unpublished)

grid shift

Daniel, Simon, Skarvelis-Kazakos, Spryos and Jain, Priyanka (2013) Local smart DC networks and distributed storage for reducing and shifting peak load. In: 22nd International Conference on Electricity Distribution. IET/CIRED, Stockholm, Sweden.

ground penetrating radar (GPR)

Kilic, Gokhan (2012) Application of advanced non-destructive testing methods on bridge health assessment and analysis. PhD thesis, University of Greenwich.

Gyroscopic stabilizer

Bui, Trung Thanh, Parnichkun, M and Le, Chi (2010) Structure-specified H loop shaping control for balancing of bicycle robots: A particle swarm optimization approach. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 224 (7). pp. 857-867. ISSN 0959-6518 (Print), 2041-3041 (Online) (doi:10.1243/09596518JSCE950)

H loop shaping control

Bui, Trung Thanh, Parnichkun, M and Le, Chi (2010) Structure-specified H loop shaping control for balancing of bicycle robots: A particle swarm optimization approach. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 224 (7). pp. 857-867. ISSN 0959-6518 (Print), 2041-3041 (Online) (doi:10.1243/09596518JSCE950)

handling

Khan, Naushad Salim (2008) Handling characteristics of coal/biomass mixes: measurements and establishing benchmarks. PhD thesis, University of Greenwich.

Pillai, John (2009) Direct on-line measurement of wall friction of coal as an indicator of handleability. PhD thesis, University of Greenwich.

heat sink

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy and Mallik, Sabuj (2011) Advanced thermal management materials for heat sinks used in microelectronics. In: EMPC-2011: 18th European Microelectronics and Packaging Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-8. ISBN 9781467306942

Ekpu, Mathias, Bhatti, Raj, Okereke, M.I., Mallik, Sabuj and Otiaba, Kenny (2013) The effect of thermal constriction on heat management in a microelectronic application. Microelectronics Journal, 45 (2). 159 - 166. ISSN 0026-2692 (doi:10.1016/j.mejo.2013.10.011)

heat sink geometry

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy, Mallik, Sabuj, Amalu, Emeka and Otiaba, Kenny (2011) Investigation of effects of heat sinks on thermal performance of microelectronic package. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 127-132. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145164)

Hierarchical Neural Network

Balisson, Dushan and Melis, Wim J.C. (2016) Hierarchical neural network model with intrinsic timing. In: International Conference on Applied System Innovation 2016. IEEE. (Submitted)

high gain

Wu, Ruiheng, Lidgey, F.J. and Hayatleh, K. (2007) Design of amplifiers with high gain accuracy and high linearity. 2007 50TH Midwest Symposium on Circuits and Systems. Midwest Symposium on Circuits and Systems Conference Proceedings, 1-3 . Institute of Electrical and Electronics Engineers, New York, pp. 269-272. ISBN 9781424411757 (doi:10.1109/MWSCAS.2007.4488586)

high linearity

Wu, Ruiheng, Lidgey, F.J. and Hayatleh, K. (2007) Design of amplifiers with high gain accuracy and high linearity. 2007 50TH Midwest Symposium on Circuits and Systems. Midwest Symposium on Circuits and Systems Conference Proceedings, 1-3 . Institute of Electrical and Electronics Engineers, New York, pp. 269-272. ISBN 9781424411757 (doi:10.1109/MWSCAS.2007.4488586)

high power IGBTs

Naayagi, R.T., Shuttleworth, R. and Forsyth, A.J. (2011) Investigating the effect of snubber capacitor on high power IGBT turn-off. In: Proceedings of the 2011 1st International Conference on Electrical Energy Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineering, Inc., Piscataway, NJ, USA, pp. 50-55. ISBN 9781612843780 (doi:10.1109/ICEES.2011.5725301)

High strain rate

Lakshman, Biju, Deng, Tong, Bradley, Michael S. A., Okereke, Michael and McIlhagger, A. T. (2014) Erosive wear of polymer composite materials and its correlation with high strain rate mechanical properties. In: 2nd International Conference on Abrasive Processes - ICAP 2014 (Programme and Abstract Book). ICAP, Cambridge, United Kingdom, p. 24.

high temperature electronics

Amalu, E.H., Ekere, N.N., Bhatti, R.S., Mallik, S., Takyi, G. and Ibhadode, A.O.A. (2011) Numerical investigation of thermo-mechanical behaviour of ball grid array solder joint at high temperature excursion. Advanced Materials Research, 367. pp. 287-292. ISSN 1662-8985 (Print), 1022-6680 (Online) (doi:10.4028/www.scientific.net/AMR.367.287)

high-frequency amplifier

Hossain, M., Wu, Ruiheng, Litchfield, Charan and Rapajic, Predrag (2008) Linearization of high frequency amplifier using a generalised signal-injection method: case study. In: Analog Signal Processing Conference 2008, 12 November 2008, Oxford Brookes University, Oxford, UK. (Unpublished)

high-rate compression

Okereke, M.I., Buckley, C.P. and Siviour, C.R. (2012) Compression of polypropylene across a wide range of strain rates. Mechanics of Time-Dependent Materials, 16 (4). pp. 361-379. ISSN 1385-2000 (Print), 1573-2738 (Online) (doi:10.1007/s11043-012-9167-z)

high-temperature electronics

Amalu, Emeka Hyginus (2012) Modelling of the reliability of flip chip lead-free solder joints at high-temperature excursions. PhD thesis, University of Greenwich.

homogenization

Akpoyomare, A. I. and Okereke, M. I. (2013) A virtual test-bed for the prediction of holistic effective elastic properties of UD composites. In: 19th International Conference on Composite Materials (ICCM19), 28 JUL 2013 - 2 AUG 2013, Montreal, Canada.

HTE

Amalu, Emeka Hyginus (2012) Modelling of the reliability of flip chip lead-free solder joints at high-temperature excursions. PhD thesis, University of Greenwich.

hydraulic machinery

Jones, Mark G. (1988) The influence of bulk particulate properties on pneumatic conveying performance. PhD thesis, Thames Polytechnic.

hydraulic systems

Kessel, Stephen Ronald (1985) The interaction between rotary valves and pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

identity management

Ma, Mingchao (2007) Distributed RBAC for subscription-based remote network services. PhD thesis, University of Greenwich.

Implants

Le, C.H., Okereke, M.I., Nguyen, V.H., Dao, V.D., Soe, S., Zlatov, N. and Le, T.H. (2011) Personalised medical product development: Methods, challenges and opportunities. Romanian Review Precision Mechanics, Optics and Mechatronics, 40. pp. 11-20. ISSN 1584-5982

improvement strategy methodology

Bhatti, R. and Berkhauer-Smith, S. (2007) An integrated methodology of manufacturing business improvement strategies. In: Olhager, J. and Persson, F., (eds.) Advances in production management systems. International Federation for Information Processing, 246 . Springer, Boston, USA, pp. 355-362. ISBN 9780387741567 (doi:http://link.springer.com/chapter/10.1007/978-0-387-74157-4_42)

improving operations

Bhatti, R. and Berkhauer-Smith, S. (2007) An integrated methodology of manufacturing business improvement strategies. In: Olhager, J. and Persson, F., (eds.) Advances in production management systems. International Federation for Information Processing, 246 . Springer, Boston, USA, pp. 355-362. ISBN 9780387741567 (doi:http://link.springer.com/chapter/10.1007/978-0-387-74157-4_42)

in-vitro fertilization

Mayur, Yaul, Bhatti, Rajinderpal and Lawrence, Stephen (2008) Evaluating the process of borosilicate glass capillaries used for fabrication of in-vitro fertilization (IVF) micro-pipettes. Biomedical Microdevices, 10 (1). pp. 123-128. ISSN 1387-2176 (doi:10.1007/s10544-007-9117-8)

indexing process

Piorkowski, B.A., Evans, R.D. and Gao, J.X. (2011) Development of a face-to-face meeting capture and indexing process. In: Proceedings of the 2011 15th International Conference on Computer Supported Cooperative Work in Design, CSCWD2011. IEEE Computer Society, Piscataway, NJ, USA, pp. 4-8. ISBN 9781457703867 (doi:10.1109/CSCWD.2011.5960047)

industrial production

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2007) Effect of abandon time on print quality and rheological characteristics for lead-free solder pastes used for flip-chip assembly. 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. Ieee/Cpmt International Electronics Manufacturing Technology Symposium . Institute of Electrical and Electronics Engineers, New York, USA, pp. 14-19. ISBN 9781424413355 (doi:10.1109/IEMT.2007.4417048)

industry

Khan, Naushad Salim (2008) Handling characteristics of coal/biomass mixes: measurements and establishing benchmarks. PhD thesis, University of Greenwich.

information and knowledge Search

Gao, James and Jian, Amanda (2007) A multi-agent based knowledge search methodology for product development. Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.

information retrieval

Jian, Guo, Gao, James and Wang, Yinglin (2010) A multi-agent based knowledge search framework to support the product development process. International Journal of Computer Integrated Manufacturing, 23 (3). pp. 237-247. ISSN 0951-192X (doi:10.1080/09511920903529222)

information systems

Gao, James and Kuang, Li (2007) A framework to integrate manufacturing information systems. In: Cunha, Pedro Filipe and Maropoulos, Paul G., (eds.) Digital enterprise technology perspectives and future challenges. Springer, New York, pp. 369-376. ISBN 9780387498638 (doi:10.1007/978-0-387-49864-5)

information systems design

Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.

Zhang, Pengcheng, Gao, James and Wang, Yinglin (2011) Requirement driven knowledge management system design to support automotive product development. International Journal of Product Lifecycle Management (IJPLM), 5 (2-4). pp. 202-223. ISSN 1743-5110 (doi:10.1504/IJPLM.2011.043188)

information systems integration

Gao, James and Kuang, Li (2007) A framework to integrate manufacturing information systems. In: Cunha, Pedro Filipe and Maropoulos, Paul G., (eds.) Digital enterprise technology perspectives and future challenges. Springer, New York, pp. 369-376. ISBN 9780387498638 (doi:10.1007/978-0-387-49864-5)

innovation

Hasan, Syed M. (2013) A collaborative framework for feasibility analysis in automotive product development with global supply chain. PhD thesis, University of Greenwich.

innovation management

Baxter, David, Roy, Rajkumar, Doultsinou, Athanasia, Gao, James and Kalta, Mohamad (2009) A knowledge management framework to support product-service systems design. International Journal of Computer Integrated Manufacturing, 22 (12). pp. 1073-1088. ISSN 0951-192X (Print), 1362-3052 (Online) (doi:10.1080/09511920903207464)

integrated strategy application

Bhatti, R. and Berkhauer-Smith, S. (2007) An integrated methodology of manufacturing business improvement strategies. In: Olhager, J. and Persson, F., (eds.) Advances in production management systems. International Federation for Information Processing, 246 . Springer, Boston, USA, pp. 355-362. ISBN 9780387741567 (doi:http://link.springer.com/chapter/10.1007/978-0-387-74157-4_42)

integrity

Adekunle, A.A. and Woodhead, S.R. (2010) Zone based systems design framework for the realisation of efficient block cipher based message authentication code algorithms. In: ARES 2010 Fifth International Conference on Availability, Reliability, and Security15-18 February 2010 Krakow, Poland. Conference Publishing Services, IEEE Computer Society, Los Alamitos, California, pp. 216-221. ISBN 9781424458790 (doi:10.1109/ARES.2010.109)

intelligent agent

Karfopoulos, Evangelos L., Papadopoulos, Panagiotis, Skarvelis-Kazakos, Spyros, Grau, Inaki, Cipcigan, Liana M., Hatziargyriou, Nikos and Jenkins, Nick (2011) Introducing electric vehicles in the microgrids concept. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082212)

inter-metallic compound (IMC)

Amalu, E.H, Ekere, N.N. and Aminu, G. (2011) Effects of inter-metallic compound on high temperature reliability of flip chip interconnects for fine pitch applications. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 208-213. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145173)

inter-metallic compounds

Salam, B. and Ekere, Ndy (2006) A study of inter-metallic compounds (IMC) formation and growth in ultra-fine pitch Sn-Ag-Cu lead-free solder joints. ESTC 2006: 1st Electronics Systemintegration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, pp. 988-994. ISBN 1424405521 (doi:10.1109/ESTC.2006.280131)

inter-relationships

Berkhauer-Smith, Samantha (2009) The integration of lean thinking and manufacturing business improvement methods within the aerospace supply chain. PhD thesis, University of Greenwich.

interface

Otiaba, K.C., Ekere, N.N., Bhatti, R.S., Mallik, S., Alam, M.O. and Amalu, E.H. (2011) Thermal interface materials for automotive electronic control unit: Trends, technology and R&D challenges. Microelectronics Reliability, 51 (12). pp. 2031-2043. ISSN 0026-2714 (doi:10.1016/j.microrel.2011.05.001)

Interference

Arshad, Kamran (2015) LTE system level performance in the presence of CQI feedback uplink delay and mobility. In: International Conference on Communications, Signal Processing, and their Applications (ICCSPA), 2015. IEEE, pp. 1-5. ISBN 978-1-4799-6532-8 (doi:10.1109/ICCSPA.2015.7081294)

interference model

Anang, Kwashie Amartei (2013) Minimum cell size for information capacity increase in cellular wireless network. PhD thesis, University of Greenwich.

intermodulation distortion

Ali, M. Tanseer, Wu, Ruiheng, Callaghan, Peter and Rapajic, Predrag (2014) Highly linear RF amplifier design: theoretical analysis and experimental study. International Journal of Electronics, 101 (1). pp. 98-112. ISSN 0020-7217 (Print), 1362-3060 (Online) (doi:10.1080/00207217.2013.769189)

internal feedback

Piorkowski, B.A., Evans, R.D. and Gao, J.X. (2011) Development of a face-to-face meeting capture and indexing process. In: Proceedings of the 2011 15th International Conference on Computer Supported Cooperative Work in Design, CSCWD2011. IEEE Computer Society, Piscataway, NJ, USA, pp. 4-8. ISBN 9781457703867 (doi:10.1109/CSCWD.2011.5960047)

Intrinsic Timing

Balisson, Dushan and Melis, Wim J.C. (2016) Hierarchical neural network model with intrinsic timing. In: International Conference on Applied System Innovation 2016. IEEE. (Submitted)

irradiation-produced

Arokiam, A. C., Barashev, A. V., Bacon, D. J. and Osetsky, Yu. N. (2006) Characteristics of the interaction of Cu-rich precipitates with irradiation-produced defects in α-Fe. Philosophical Magazine Letters, 85 (9). pp. 491-501. ISSN 0950–0839 (Print), 1362–3036 (Online) (doi:10.1080/09500830500300047)

isotropic conductive adhesives

Durairaj, R., Mallik, S., Seman, A. and Ekere, N.N. (2009) Investigation of wall-slip behaviour in lead-free solder pastes and isotropic conductive adhesives. Sadhana - Academy Proceedings in Engineering Sciences, 34 (5). pp. 799-810. ISSN 0256-2499 (Print), 0973-7677 (Online) (doi:10.1007/s12046-009-0046-5)

Durairaj, R., Mallik, S., Seman, A., Marks, A. and Ekere, N.N. (2009) Rheological characterisation of solder pastes and isotropic conductive adhesives used for flip-chip assembly. Journal of Materials Processing Technology, 209 (8). pp. 3923-3930. ISSN 0924-0136 (doi:10.1016/j.jmatprotec.2008.09.013)

Durairaj, R., Mallik, S., Seman, A., Marks, A. and Ekere, N.N. (2008) Viscoelastic properties of solder paste and isotropic conductive adhesives used for flip-chip assembly. In: Electronic Manufacturing Technology Symposium (IEMT), 2008 33rd IEEE/CPMT International. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 1-8. ISBN 9781424433926 (print), 9781424433933 (electronic) ISSN 1089-8190 (doi:10.1109/IEMT.2008.5507801)

Durairaj, R., Man, Lam Wai, Ramesh, S., Wea, Lim Chia, Leng, Eu Poh, Ekere, N.N., Mallik, S. and Seman, A. (2009) Investigation of wall-slip effect on lead-free solder paste and isotropic conductive adhesives. In: Electronics Packaging Technology Conference, 2009. EPTC '09. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 422-426. ISBN 978-1-4244-5099-2 (print), 978-1-4244-5100-5 (e-ISBN) (doi:10.1109/EPTC.2009.5416511)

Durairaj, Rajkumar, Man, Lam Wai, Mallik, Sabuj and Ekere, Ndy (2009) Thixotropic studies of lead-based solder, lead-free solder and conductive adhesive pastes. In: 11th Electronic Material and Packaging Conference (EMAP), 1-3 Dec 2009, Penang, Malaysia. (Unpublished)

KM

Piorkowski, Barry Andrew, Gao, James Xiaoyu, Evans, Richard David and Martin, Nick (2012) A dynamic knowledge management framework for the high value manufacturing industry. International Journal of Production Research, 51 (7). pp. 2176-2185. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:10.1080/00207543.2012.709650)

Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.

Zhang, Pengcheng, Gao, James and Wang, Yinglin (2011) Requirement driven knowledge management system design to support automotive product development. International Journal of Product Lifecycle Management (IJPLM), 5 (2-4). pp. 202-223. ISSN 1743-5110 (doi:10.1504/IJPLM.2011.043188)

know-how

Soroka, A.J. and Hieu, L.C. (2011) Design challenges for implementing a customer driven mass-customisation system. In: Proceedings - INDIN 2011: 2011 9th IEEE International Conference on Industrial Informatics. Institute of Electrical and Electronics Engineers Inc, Piscataway, USA, pp. 857-862. ISBN 9781457704338 (Online), 9781457704352 (Print) (doi:10.1109/INDIN.2011.6035005)

knowledge

Eadie, R. and Gao, James (2008) An industrial implementation of a methodology for the optimisation of product design tolerances. In: Kai, Cheng, Makatsoris, Harris C. and Harrison, David, (eds.) Advances in manufacturing technology XXII: the proceedings of the 6th International Conference on Manufacturing Research ICMR08, 9th-11th September 2008, London UK. Brunel University College, Brunel University, pp. 161-170. ISBN 9781902316604

knowledge management

Gao, James, Baxter, David, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2007) An engineering design knowledge reuse methodology using process modelling. Research in Engineering Design, 18 (1). pp. 37-48. ISSN 0934-9839 (doi:10.1007/s00163-007-0028-8)

Mountney, S.L., Gao, James and Wiseall, S. (2007) A knowledge system to support manufacturing knowledge during preliminary design. International Journal of Production Research, 45 (7). pp. 1521-1537. ISSN 0020-7543 (doi:10.1080/00207540600942300)

knowledge management

Baxter, David, Roy, Rajkumar, Doultsinou, Athanasia, Gao, James and Kalta, Mohamad (2009) A knowledge management framework to support product-service systems design. International Journal of Computer Integrated Manufacturing, 22 (12). pp. 1073-1088. ISSN 0951-192X (Print), 1362-3052 (Online) (doi:10.1080/09511920903207464)

Gao, James and Jian, Amanda (2007) A multi-agent based knowledge search methodology for product development. Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.

Gao, James, Zhang, Pengcheng, Baxter, David and Kalta, Mo (2007) Developing a design process model for the reuse of knowledge. Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.

Piorkowski, Barry Andrew, Gao, James Xiaoyu, Evans, Richard David and Martin, Nick (2012) A dynamic knowledge management framework for the high value manufacturing industry. International Journal of Production Research, 51 (7). pp. 2176-2185. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:10.1080/00207543.2012.709650)

Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.

Zhang, Pengcheng and Gao, James (2010) Requirements driven knowledge system design for product development. In: Proceedings of the 6th CIRP-Sponsored International Conference on Digital Enterprise Technology. Advances in Intelligent and Soft Computing, 66/201 . Springer, Hong Kong, pp. 169-184. ISBN 9783642104299 ISSN 1867-5662 (doi:10.1007/978-3-642-10430-5_13)

Zhang, Pengcheng, Gao, James and Wang, Yinglin (2011) Requirement driven knowledge management system design to support automotive product development. International Journal of Product Lifecycle Management (IJPLM), 5 (2-4). pp. 202-223. ISSN 1743-5110 (doi:10.1504/IJPLM.2011.043188)

knowledge representation

Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2008) Knowledge reuse in manufacturability analysis. Robotics and Computer Integrated Manufacturing, 24 (4). pp. 508-513. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.003)

Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2009) Manufacturing knowledge verification in design support systems. International Journal of Production Research, 47 (12). pp. 3179-3204. ISSN 0020-7543 (Print), 1366–588X (Online) (doi:10.1080/00207540701802452)

Zhu, Haihua, Gao, James, Li, Dongbo and Tang, Dunbing (2012) A Web-based Product Service System for aerospace maintenance, repair and overhaul services. Computers in Industry, 63 (4). pp. 338-348. ISSN 0166-3615 (doi:10.1016/j.compind.2012.02.016)

knowledge reuse

Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2008) Knowledge reuse in manufacturability analysis. Robotics and Computer Integrated Manufacturing, 24 (4). pp. 508-513. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.003)

knowledge search methodology

Jian, Guo (2011) Knowledge search for new product development: a multi-agent based methodology. PhD thesis, University of Greenwich.

Jian, Guo, Gao, James and Wang, Yinglin (2010) A multi-agent based knowledge search framework to support the product development process. International Journal of Computer Integrated Manufacturing, 23 (3). pp. 237-247. ISSN 0951-192X (doi:10.1080/09511920903529222)

knowledge sharing

Gao, James and Bradfield, Daniel J. (2007) A methodology to facilitate knowledge sharing in the new product development process. International Journal of Production Research, 45 (7). pp. 1489-1504. ISSN 0020-7543 (doi:10.1080/00207540600942227)

knowledge sharing framework

Tavakolikhou, Mehdi (2013) A knowledge sharing framework to support rapid prototyping in collaborative automotive supply chain. PhD thesis, University of Greenwich.

knowledge system design

Zhang, Pengcheng and Gao, James (2010) Requirements driven knowledge system design for product development. In: Proceedings of the 6th CIRP-Sponsored International Conference on Digital Enterprise Technology. Advances in Intelligent and Soft Computing, 66/201 . Springer, Hong Kong, pp. 169-184. ISBN 9783642104299 ISSN 1867-5662 (doi:10.1007/978-3-642-10430-5_13)

lead

Mallik, Sabuj, Ekere, Ndy, Durairaj, Rajkumar and Marks, Antony (2008) An investigation into the rheological properties of different lead-free solder pastes for surface mount applications. Soldering & Surface Mount Technology, 20 (2). pp. 3-10. ISSN 0954-0911 (doi:1108/09540910810871511)

lead-free

Durairaj, R., Mallik, S., Seman, A., Marks, A. and Ekere, N.N. (2009) Rheological characterisation of solder pastes and isotropic conductive adhesives used for flip-chip assembly. Journal of Materials Processing Technology, 209 (8). pp. 3923-3930. ISSN 0924-0136 (doi:10.1016/j.jmatprotec.2008.09.013)

Durairaj, R., Man, Lam Wai, Ekere, N.N. and Mallik, S. (2010) The effect of wall-slip formation on the rheological behaviour of lead-free solder pastes. Materials and Design, 31 (3). pp. 1056-1062. ISSN 0261-3069 (doi:10.1016/j.matdes.2009.09.051)

Ekpu, Mathias, Bhatti, Raj, Okereke, Michael I., Mallik, Sabuj and Otiaba, Kenny (2013) Fatigue life of lead-free solder thermal interface materials at varying bond line thickness in microelectronics. Microelectronics Reliability, 54 (1). 239 - 244. ISSN 0026-2714 (doi:10.1016/j.microrel.2013.08.006)

Mallik, S., Schmidt, M., Bauer, R. and Ekere, N.N. (2010) Evaluating solder paste behaviours through rheological test methods and their correlation to the printing performance. Soldering & Surface Mount Technology, 22 (4). pp. 42-49. ISSN 0954-0911 (doi:10.1108/09540911011076871)

lead-free solder

Otiaba, K.C., Bhatti, R.S., Ekere, N.N., Mallik, S., Amalu, E.H. and Ekpu, M. (2011) Thermal effects of die-attach voids location and style on performance of chip level package. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 231-236. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145176)

lead-free solder paste

Durairaj, R., Ramesh, S., Mallik, S., Seman, A. and Ekere, N. (2009) Rheological characterisation and printing performance of Sn/Ag/Cu solder pastes. Materials and Design, 30 (9). pp. 3812-3818. ISSN 0261-3069 (doi:10.1016/j.matdes.2009.01.028)

lead-free solder pastes

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2007) Effect of abandon time on print quality and rheological characteristics for lead-free solder pastes used for flip-chip assembly. 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. Ieee/Cpmt International Electronics Manufacturing Technology Symposium . Institute of Electrical and Electronics Engineers, New York, USA, pp. 14-19. ISBN 9781424413355 (doi:10.1109/IEMT.2007.4417048)

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2008) Effect of long-term aging on the rheological characteristics and printing performance of lead-free solder pastes used for flip-chip assembly. Smart Processing Technology, 2. pp. 131-134.

lead-free soldering

Amalu, Emeka H., Lui, Y.T., Ekere, Ndy, Bhatti, R.S. and Takyi, G. (2011) Investigation of the effects of reflow profile parameters on lead-free solder bump volumes and joint integrity. In: AIP Conference Proceedings. American Institute of Physics, Melville, NY, USA, pp. 639-644. (doi:10.1063/1.3552519)

Bernasko, P.K., Mallik, S., Ekere, N.N., Seman, A. and Tayki, G. (2010) Effect of reflow profile and thermal cycle ageing on the intermetallic formation and growth in lead-free soldering. In: Electronics Packaging Technology. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 986-990. ISBN 978-1-4244-5100-5 (electronic), 978-1-4244-5099-2 (print) (doi:10.1109/EPTC.2009.5416398)

Ekere, N and Mallik, Sabuj (2008) A methodology for characterising new lead-free solder paste formulations used for flip-chip assembly applications. In: Kobayashi, Akira, (ed.) Smart processing technology: SPT '07. High Temperature Society of Japan, Ibaraki, Japan, pp. 59-64.

Leaky-Integrate and Fire

Balisson, Dushan and Melis, Wim J.C. (2016) Hierarchical neural network model with intrinsic timing. In: International Conference on Applied System Innovation 2016. IEEE. (Submitted)

lean environment

Berkhauer-Smith, Samantha (2009) The integration of lean thinking and manufacturing business improvement methods within the aerospace supply chain. PhD thesis, University of Greenwich.

lean manufacture

Berkhauer-Smith, Samantha (2009) The integration of lean thinking and manufacturing business improvement methods within the aerospace supply chain. PhD thesis, University of Greenwich.

learning

Chi, Xuesong (2008) A web-based intelligent learning environment for the teaching of industrial continuous quality improvement. PhD thesis, University of Greenwich.

least mean square (LMS)

Eneh, T., Rapajic, P., Anang, K., Bakalis, P. and Bello, L. (2012) Information capacity of adaptive MIMO OFDM wireless communication systems. In: Adaptive Science and Technology (ICAST). Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 157-164. ISBN 978-1-4673-0758-1 (doi:10.1109/ICASTech.2011.6145168)

life cycle

Piorkowski, Barry, Gao, James and Evans, Richard (2011) A case-study: finding references to product development knowledge from analysis of face-to-face meetings. In: Glocalized Solutions for Sustainability in Manufacturing Proceedings of the 18th CIRP International Conference on Life Cycle Engineering. Springer, New York, USA, pp. 564-569. ISBN 978-3642196911 (doi:10.1007/978-3-642-19692-8-98)

Piorkowski, Barry Andrew, Gao, James Xiaoyu, Evans, Richard David and Martin, Nick (2012) A dynamic knowledge management framework for the high value manufacturing industry. International Journal of Production Research, 51 (7). pp. 2176-2185. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:10.1080/00207543.2012.709650)

life-cycle

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2010) Micro-generation for 2050: life-cycle carbon footprint of micro-generation sources. In: 2009 44th International Universities’ Power Engineering Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-6823-2

life-cycle material breakdown

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2010) Micro-generation for 2050: life-cycle carbon footprint of micro-generation sources. In: 2009 44th International Universities’ Power Engineering Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-6823-2

linear visco-elastic

Durairaj, R., Mallik, S., Seman, A., Marks, A. and Ekere, N.N. (2009) Rheological characterisation of solder pastes and isotropic conductive adhesives used for flip-chip assembly. Journal of Materials Processing Technology, 209 (8). pp. 3923-3930. ISSN 0924-0136 (doi:10.1016/j.jmatprotec.2008.09.013)

linearisation

Ali, M. Tanseer, Wu, Ruiheng, Callaghan, Peter and Rapajic, Predrag (2011) Design of a highly linear high frequency amplifier using Volterra model. In: Microwave, Antenna, Propagation, and EMC Technologies for Wireless Communications (MAPE). Microwave, Antenna, Propagation, and EMC Technologies for Wireless Communications (MAPE) . Institute of Electrical and Electronic Engineers, Pistacaway, USA, pp. 355-358. ISBN 978-1-4244-8268-9 (doi:10.1109/MAPE.2011.6156259)

Ali, M. Tanseer, Wu, Ruiheng, Callaghan, Peter and Rapajic, Predrag (2014) Highly linear RF amplifier design: theoretical analysis and experimental study. International Journal of Electronics, 101 (1). pp. 98-112. ISSN 0020-7217 (Print), 1362-3060 (Online) (doi:10.1080/00207217.2013.769189)

linearity

Wu, Ruiheng, Lidgey, F.J., Hayatleh, K. and Hart, B.L. (2010) Differential amplifier with improved gain-accuracy and linearity. Interntional Journal of Circuit Theory and Applications, 38 (8). pp. 829-844. ISSN 0098-9886 (doi:10.1002/cta.601)

literature review

Berkhauer-Smith, Samantha (2009) The integration of lean thinking and manufacturing business improvement methods within the aerospace supply chain. PhD thesis, University of Greenwich.

Gao, James, Baxter, David and Roy, Rajkumar (2009) Managing knowledge within the manufacturing enterprise: an overview. International Journal of Manufacturing Technology and Management (IJMTM), 18 (2). pp. 183-209. ISSN 1368-2148 (doi:10.1504/IJMTM.2009.026193)

load flow

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Awad, B., Cipcigan, L.M. and Jenkins, N. (2010) Impact of residential charging of electric vehicles on distribution networks, a probabilistic approach. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

Long Term Evolution

Arshad, Kamran (2015) LTE system level performance in the presence of CQI feedback uplink delay and mobility. In: International Conference on Communications, Signal Processing, and their Applications (ICCSPA), 2015. IEEE, pp. 1-5. ISBN 978-1-4799-6532-8 (doi:10.1109/ICCSPA.2015.7081294)

LTE-A

Arshad, Kamran (2015) LTE system level performance in the presence of CQI feedback uplink delay and mobility. In: International Conference on Communications, Signal Processing, and their Applications (ICCSPA), 2015. IEEE, pp. 1-5. ISBN 978-1-4799-6532-8 (doi:10.1109/ICCSPA.2015.7081294)

maintenance

Zhu, Haihua, Gao, James, Li, Dongbo and Tang, Dunbing (2012) A Web-based Product Service System for aerospace maintenance, repair and overhaul services. Computers in Industry, 63 (4). pp. 338-348. ISSN 0166-3615 (doi:10.1016/j.compind.2012.02.016)

management knowledge

Piorkowski, Barry Andrew, Gao, James Xiaoyu, Evans, Richard David and Martin, Nick (2012) A dynamic knowledge management framework for the high value manufacturing industry. International Journal of Production Research, 51 (7). pp. 2176-2185. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:10.1080/00207543.2012.709650)

manufacturers

Tavakolikhou, Mehdi (2013) A knowledge sharing framework to support rapid prototyping in collaborative automotive supply chain. PhD thesis, University of Greenwich.

manufactures

Angulo Pinzon, Oscar Andres (2012) Modelling of dosator filling and discharge. PhD thesis, University of Greenwich.

manufacturing

Berkhauer-Smith, Samantha (2009) The integration of lean thinking and manufacturing business improvement methods within the aerospace supply chain. PhD thesis, University of Greenwich.

Gao, James and Baxter, David (2008) Editorial for the special issue of RCIM for ICMR2005: Third International Conference on Manufacturing Research, Cranfield University, September 6th–9th 2005, Cranfield, UK. Robotics and Computer-Integrated Manufacturing, 24 (4). pp. 499-500. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.001)

Hasan, Syed M. (2013) A collaborative framework for feasibility analysis in automotive product development with global supply chain. PhD thesis, University of Greenwich.

Piorkowski, Barry Andrew, Gao, James Xiaoyu, Evans, Richard David and Martin, Nick (2012) A dynamic knowledge management framework for the high value manufacturing industry. International Journal of Production Research, 51 (7). pp. 2176-2185. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:10.1080/00207543.2012.709650)

manufacturing and cost evaluation

Gao, James and Sharma, R. (2007) A knowledge-based manufacturing and cost evaluation system for product design/re-design. The International Journal of Advanced Manufacturing Technology, 33 (9-10). pp. 856-865. ISSN 0268-3768 (doi:10.1007/s00170-006-0530-6)

manufacturing business improvements

Bhatti, Rajinderpal and Berkhauer-Smith, Samantha (2007) Integrating both technical and cultural aspects of process improvement. In: 5th International Conference on Manufacturing Research (ICMR 2007), 11- 13 September 2007, De Montfort University Leicester. (Unpublished)

manufacturing information systems

Piorkowski, Barry Andrew, Gao, James Xiaoyu, Evans, Richard David and Martin, Nick (2012) A dynamic knowledge management framework for the high value manufacturing industry. International Journal of Production Research, 51 (7). pp. 2176-2185. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:10.1080/00207543.2012.709650)

manufacturing knowhow

Gao, James, Cheung, W.M., Bramall, D.G., Maropoulos, Paul G. and Aziz, Hayder (2006) Organizational knowledge encapsulation and re-use in collaborative product development. International Journal of Computer Integrated Manufacturing, 19 (7). pp. 736-750. ISSN 0951-192X (doi:10.1080/09511920500504479)

manufacturing knowledge

Gao, James, Baxter, David and Roy, Rajkumar (2009) Managing knowledge within the manufacturing enterprise: an overview. International Journal of Manufacturing Technology and Management (IJMTM), 18 (2). pp. 183-209. ISSN 1368-2148 (doi:10.1504/IJMTM.2009.026193)

Mountney, S.L., Gao, James and Wiseall, S. (2007) A knowledge system to support manufacturing knowledge during preliminary design. International Journal of Production Research, 45 (7). pp. 1521-1537. ISSN 0020-7543 (doi:10.1080/00207540600942300)

manufacturing operations

Bhatti, R. and Berkhauer-Smith, S. (2007) An integrated methodology of manufacturing business improvement strategies. In: Olhager, J. and Persson, F., (eds.) Advances in production management systems. International Federation for Information Processing, 246 . Springer, Boston, USA, pp. 355-362. ISBN 9780387741567 (doi:http://link.springer.com/chapter/10.1007/978-0-387-74157-4_42)

manufacturing processes

Burnett, Anthony John (1996) The use of laboratory erosion tests for the prediction of wear in pneumatic conveyor bends. PhD thesis, University of Greenwich.

marine engineers

Beams, Rodney and Coutroubis, Alec (2008) The use of computer based teaching (CBT) in the training of marine engineers. In: 2nd International Scientific Maritime Conference - Human Resources in the Shipping Industry: New Trends and Challenges in the 21st Century, 21-22 November 2008, Limassol. (Unpublished)

Coutroubis, Alexander and Beams, Rodney (2007) The use of computer based training (CBT) in the training of marine engineers. In: LMA 9th International Conference Maritime Transport and Infrastructure-2007, 19-20 April 2007, Riga, Latvia. (Unpublished)

mass production

Soroka, A.J. and Hieu, L.C. (2011) Design challenges for implementing a customer driven mass-customisation system. In: Proceedings - INDIN 2011: 2011 9th IEEE International Conference on Industrial Informatics. Institute of Electrical and Electronics Engineers Inc, Piscataway, USA, pp. 857-862. ISBN 9781457704338 (Online), 9781457704352 (Print) (doi:10.1109/INDIN.2011.6035005)

materials

Burnett, Anthony John (1996) The use of laboratory erosion tests for the prediction of wear in pneumatic conveyor bends. PhD thesis, University of Greenwich.

Burnett, Anthony John (1996) The use of laboratory erosion tests for the prediction of wear in pneumatic conveyor bends. PhD thesis, University of Greenwich.

Otiaba, K.C., Ekere, N.N., Amalu, E.H., Bhatti, R.S. and Mallik, S. (2012) Thermal management materials for electronic control unit: trends, processing technology and R and D challenges. Advanced Materials Research, 367. pp. 301-307. ISSN 1022-6680 (Print), 1662-8985 (Online) (doi:10.4028/www.scientific.net/AMR.367.301)

Otiaba, K.C., Ekere, N.N., Amalu, E.H., Bhatti, R.S. and Mallik, S. (2010) Thermal management materials for electronic control unit: trends, processing technology and R&D challenges. In: International Conference on Engineering Research & Development: Advances in Engineering Science & Technology, 7-9 September 2010, Benin City, Africa.

materials science

Dyrøy, Are (2006) Quantification and mitigation of segregation in the handling of alumina in aluminium production. PhD thesis, University of Greenwich.

mechanical engineering

Li, Ji (2007) A study of the solid particle erosion performance of automative and other novel low carbon steels. PhD thesis, University of Greenwich.

Mechanical properties

Lakshman, Biju, Deng, Tong, Bradley, Michael S. A., Okereke, Michael and McIlhagger, A. T. (2014) Erosive wear of polymer composite materials and its correlation with high strain rate mechanical properties. In: 2nd International Conference on Abrasive Processes - ICAP 2014 (Programme and Abstract Book). ICAP, Cambridge, United Kingdom, p. 24.

Medical product development

Le, C.H., Okereke, M.I., Nguyen, V.H., Dao, V.D., Soe, S., Zlatov, N. and Le, T.H. (2011) Personalised medical product development: Methods, challenges and opportunities. Romanian Review Precision Mechanics, Optics and Mechatronics, 40. pp. 11-20. ISSN 1584-5982

meeting capture

Piorkowski, B.A., Evans, R.D. and Gao, J.X. (2011) Development of a face-to-face meeting capture and indexing process. In: Proceedings of the 2011 15th International Conference on Computer Supported Cooperative Work in Design, CSCWD2011. IEEE Computer Society, Piscataway, NJ, USA, pp. 4-8. ISBN 9781457703867 (doi:10.1109/CSCWD.2011.5960047)

MERGE project

Ferdowsi, Mohsen, Grau Unda, Iñaki, Karfopoulos, Evangelos, Papadopoulos, Panagiotis, Skarvelis-Kazakos, Spyros, Cipcigan, Liana, Raab, Andreas F., Dimeas, Aris, Abbasi, Ehsan and Strunz, Kai (2010) Controls and EV aggregation for virtual power plants. Project Report. MERGE.

Moreira, C.L., Rua, David, Karfopoulos, E., Zountouridou, E., Soares, F.J., Bourithi, I., Grau, I., Peças Lopes, J.A., Cipcigan, L.M., Seca, Luis, Moschakis, Marios, Rocha Almeida, P.M., Moutis, P., Papadopoulos, P., Rei, R.J., Bessa, Ricardo J. and Skarvelis-Kazakos, S. (2010) Extend concepts of MG by identifying several EV smart control approaches to be embedded in the Smart Grid concept to manage EV individually or in clusters. Project Report. MERGE.

Meso-mechanical modelling

Akpoyomare, Ambrose I., Okereke, Michael, Bingley, Mark, McIlhagger, A. T. and Archer, E. (2015) Virtual geometric realization of woven textile composites. In: Proceedings of 20th International Conference on Composite Materials. ICCM, Copenhagen, Denmark.

message authentication information

Adekunle, A.A. and Woodhead, S.R. (2010) Zone based systems design framework for the realisation of efficient block cipher based message authentication code algorithms. In: ARES 2010 Fifth International Conference on Availability, Reliability, and Security15-18 February 2010 Krakow, Poland. Conference Publishing Services, IEEE Computer Society, Los Alamitos, California, pp. 216-221. ISBN 9781424458790 (doi:10.1109/ARES.2010.109)

metaknowledge

Gao, James, Bradfield, Daniel J. and Soltan, Hossein (2007) A metaknowledge approach to facilitate knowledge sharing in the global product development process. Computer-Aided Design and Applications, 4 (1-4). pp. 519-528. ISSN 1686-4360 (doi:10.3722/cadaps.2007.519-528)

metaknowledge ontology

Gao, James, Bradfield, Daniel J. and Soltan, Hossein (2007) Development of a tool to support the dissemination of information about knowledge in multilingual product development teams. In: Garetti, Marco, Terzi, Sergio, Ball, Peter D. and Han, Soonhung, (eds.) Proceedings of the International conference on product lifecycle management: assessing the industrial relevance. Inderscience Enterprises Ltd, Genva Aeroport, pp. 261-270. ISBN 9780907776321

metal target

Deng, Tong, Bingley, Mark S. and Bradley, Michael S. A. (2004) The influence of particle rotation on the solid particle erosion rate of metals. Wear, 256 (11-12). pp. 1037-1049. ISSN 0043-1648 (doi:10.1016/S0043-1648(03)00536-2)

metallurgy

Mallik, Sabuj (2009) Study of the time-dependent rheological behaviour of lead-free solder pastes and flux mediums used for flip-chip assembly applications. PhD thesis, University of Greenwich.

Micro-CHP

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2009) Micro-generation for 2050: emissions performances of micro-generation sources during operation. Pollack Periodica, 4 (2). pp. 89-99. ISSN 1788-1994 (Print), 1788-3911 (Online) (doi:10.1556/Pollack.4.2009.2.9)

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2010) Micro-generation for 2050: life-cycle carbon footprint of micro-generation sources. In: 2009 44th International Universities’ Power Engineering Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-6823-2

micro-contact

Ekpu, Mathias, Bhatti, Raj, Okereke, M.I., Mallik, Sabuj and Otiaba, Kenny (2013) The effect of thermal constriction on heat management in a microelectronic application. Microelectronics Journal, 45 (2). 159 - 166. ISSN 0026-2692 (doi:10.1016/j.mejo.2013.10.011)

micro-gap

Ekpu, Mathias, Bhatti, Raj, Okereke, M.I., Mallik, Sabuj and Otiaba, Kenny (2013) The effect of thermal constriction on heat management in a microelectronic application. Microelectronics Journal, 45 (2). 159 - 166. ISSN 0026-2692 (doi:10.1016/j.mejo.2013.10.011)

micro-generation

Grau, I., Papadopoulos, P., Skarvelis-Kazakos, S., Cipcigan, L.M. and Jenkins, N. (2010) Virtual power plants with electric vehicles. In: 2nd European Conference on SmartGrids and E-Mobility, 20-21 Oct 2010, Brussels, Belgium. (Unpublished)

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2009) Micro-generation for 2050: emissions performances of micro-generation sources during operation. Pollack Periodica, 4 (2). pp. 89-99. ISSN 1788-1994 (Print), 1788-3911 (Online) (doi:10.1556/Pollack.4.2009.2.9)

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2010) Micro-generation for 2050: life-cycle carbon footprint of micro-generation sources. In: 2009 44th International Universities’ Power Engineering Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-6823-2

Skarvelis-Kazakos, Spyros, Papadopoulos, Panagiotis, Grau, Iñaki, Gerber, Annelies, Cipcigan, Liana M., Jenkins, Nick and Carradore, Loredana (2010) Carbon optimized virtual power plant with electric vehicles. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

micro-generators

Skarvelis-Kazakos, Spyros, Rikos, Evangelos, Kolentini, Efstathia, Cipcigan, Liana M. and Jenkins, Nick (2013) Implementing agent-based emissions trading for controlling Virtual Power Plant emissions. Electric Power Systems Research, 102. ISSN 0378-7796 (doi:10.1016/j.epsr.2013.04.004)

micro-grids

Ferdowsi, Mohsen, Grau Unda, Iñaki, Karfopoulos, Evangelos, Papadopoulos, Panagiotis, Skarvelis-Kazakos, Spyros, Cipcigan, Liana, Raab, Andreas F., Dimeas, Aris, Abbasi, Ehsan and Strunz, Kai (2010) Controls and EV aggregation for virtual power plants. Project Report. MERGE.

Grau, I., Papadopoulos, P., Skarvelis-Kazakos, S., Cipcigan, L.M. and Jenkins, N. (2010) Virtual power plants with electric vehicles. In: 2nd European Conference on SmartGrids and E-Mobility, 20-21 Oct 2010, Brussels, Belgium. (Unpublished)

Grau Unda, I., Papadopoulos, P., Skarvelis-Kazakos, S., Cipcigan, L.M. and Jenkins, N. (2011) Energy storage for balancing a local distribution network area. In: Carbone, Rosario, (ed.) Energy Storage in the Emerging Era of Smart Grids. InTech, New York, USA, pp. 301-320. ISBN 978-953-307-269-2 (doi:10.5772/18305)

Moreira, C.L., Rua, David, Karfopoulos, E., Zountouridou, E., Soares, F.J., Bourithi, I., Grau, I., Peças Lopes, J.A., Cipcigan, L.M., Seca, Luis, Moschakis, Marios, Rocha Almeida, P.M., Moutis, P., Papadopoulos, P., Rei, R.J., Bessa, Ricardo J. and Skarvelis-Kazakos, S. (2010) Extend concepts of MG by identifying several EV smart control approaches to be embedded in the Smart Grid concept to manage EV individually or in clusters. Project Report. MERGE.

Skarvelis-Kazakos, Spyros, Rikos, Evangelos, Kolentini, Efstathia, Cipcigan, Liana M. and Jenkins, Nick (2013) Implementing agent-based emissions trading for controlling Virtual Power Plant emissions. Electric Power Systems Research, 102. ISSN 0378-7796 (doi:10.1016/j.epsr.2013.04.004)

micro-pipettes

Mayur, Yaul, Bhatti, Rajinderpal and Lawrence, Stephen (2008) Evaluating the process of borosilicate glass capillaries used for fabrication of in-vitro fertilization (IVF) micro-pipettes. Biomedical Microdevices, 10 (1). pp. 123-128. ISSN 1387-2176 (doi:10.1007/s10544-007-9117-8)

micro-sources

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2009) Micro-generation for 2050: emissions performances of micro-generation sources during operation. Pollack Periodica, 4 (2). pp. 89-99. ISSN 1788-1994 (Print), 1788-3911 (Online) (doi:10.1556/Pollack.4.2009.2.9)

microCHP emission

Skarvelis-Kazakos, Spyros, Papadopoulos, Panagiotis, Grau, Iñaki, Gerber, Annelies, Cipcigan, Liana M., Jenkins, Nick and Carradore, Loredana (2010) Carbon optimized virtual power plant with electric vehicles. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

microelectronics

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy, Mallik, Sabuj, Amalu, Emeka and Otiaba, Kenny (2011) Investigation of effects of heat sinks on thermal performance of microelectronic package. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 127-132. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145164)

microgeneration source

Skarvelis-Kazakos, Spyros, Papadopoulos, Panagiotis, Grau, Iñaki, Gerber, Annelies, Cipcigan, Liana M., Jenkins, Nick and Carradore, Loredana (2010) Carbon optimized virtual power plant with electric vehicles. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

microgeneration sources

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2010) Micro-generation for 2050: life-cycle carbon footprint of micro-generation sources. In: 2009 44th International Universities’ Power Engineering Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-6823-2

microgenerator

Skarvelis-Kazakos, Spyros, Papadopoulos, Panagiotis, Grau, Iñaki, Gerber, Annelies, Cipcigan, Liana M., Jenkins, Nick and Carradore, Loredana (2010) Carbon optimized virtual power plant with electric vehicles. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

microgrid

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2010) Micro-generation for 2050: life-cycle carbon footprint of micro-generation sources. In: 2009 44th International Universities’ Power Engineering Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-6823-2

microgrids

Karfopoulos, Evangelos L., Papadopoulos, Panagiotis, Skarvelis-Kazakos, Spyros, Grau, Inaki, Cipcigan, Liana M., Hatziargyriou, Nikos and Jenkins, Nick (2011) Introducing electric vehicles in the microgrids concept. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082212)

microstructure

Durairaj, Rajkumar, Mallik, Sabuj, Seman, Anton, Marks, Antony and Ekere, Ndy (2008) Investigation of wall-slip effect on paste release characteristic in flip-chip stencil printing process. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1328-1333. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763615)

Mallik, Sabuj, Schmidt, M., Bauer, R. and Ekere, Ndy (2008) Influence of solder paste components on rheological behaviour. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, USA, pp. 1135-1140. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684512)

Marks, A.E., Mallik, S., Ekere, N.N. and Seman, A. (2008) Effect of temperature on slumping behaviour of lead-free solder paste and its rheological simulation. 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 829-832. ISBN 97814244-28137 (Print), 978-1-4244-2814-4 (Electronic) (doi:10.1109/ESTC.2008.4684459)

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) Development of an in-situ, non-destructive ultrasonic monitoring technique for solder pastes. 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 209-214. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684351)

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) In-situ non-destructive ultrasonic rheology technique for monitoring different lead-free solder pastes for surface mount applications. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1448-1454. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763635)

Microstructures

Lakshman, Biju, Deng, Tong, Bradley, Michael S. A., Okereke, Michael and McIlhagger, A. T. (2014) Erosive wear of polymer composite materials and its correlation with high strain rate mechanical properties. In: 2nd International Conference on Abrasive Processes - ICAP 2014 (Programme and Abstract Book). ICAP, Cambridge, United Kingdom, p. 24.

microsystems

Durairaj, Rajkumar (2006) Rheological characterisation of solder pastes and isotropic conductive adhesives (ICAs) for microsystems assembly technology. PhD thesis, University of Greenwich.

microtools

Yaul, M., Culme-Seymour, E., Ruban, L., Veratich, F. S. and Bhatti, R. (2008) Firepolished glass microtools for human embryonic stem cell (HESC) cultivation. In: 7th Annual UKSB Conference and Postgraduate Day, 26-28 June 2008, University of Liverpool, UK. (Unpublished)

MIMO OFDM

Eneh, T., Rapajic, P., Anang, K., Bakalis, P. and Bello, L. (2012) Information capacity of adaptive MIMO OFDM wireless communication systems. In: Adaptive Science and Technology (ICAST). Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 157-164. ISBN 978-1-4673-0758-1 (doi:10.1109/ICASTech.2011.6145168)

miniaturization

Amalu, Emeka H., Lui, Y.T., Ekere, Ndy, Bhatti, R.S. and Takyi, G. (2011) Investigation of the effects of reflow profile parameters on lead-free solder bump volumes and joint integrity. In: AIP Conference Proceedings. American Institute of Physics, Melville, NY, USA, pp. 639-644. (doi:10.1063/1.3552519)

mobile agents

Karfopoulos, Evangelos L., Papadopoulos, Panagiotis, Skarvelis-Kazakos, Spyros, Grau, Inaki, Cipcigan, Liana M., Hatziargyriou, Nikos and Jenkins, Nick (2011) Introducing electric vehicles in the microgrids concept. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082212)

mobile antennas

Callaghan, Peter and Batchelor, John C. (2008) Multiband low-profile antenna for remote antenna unit picocell applications. IEEE Transactions on Antennas and Propagation, 56 (8). pp. 2475-2480. ISSN 0018-926X (doi:10.1109/TAP.2008.927558)

mobile communication system

Callaghan, Peter, Sagor, Md. Hasanuzzaman and Batchelor, John C. (2011) Control of ground plane influence on antenna radiation pattern for mobile handheld devices. In: 2011 Loughborough Antennas and Propagation Conference (LAPC). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-4. ISBN 978-1-4577-1014-8 (doi:10.1109/LAPC.2011.6114127)

mobile network

Bello, Lawal (2013) Power conservation and performance analysis of mobile ad hoc wireless networks. PhD thesis, University of Greenwich.

mobile robots

Seals, Richard and Eissa, Hazem (2016) Optimising data extraction from one dimensional distance sensors. In: The First Medway Engineering Conference on Systems: Efficiency, Sustainability and Modelling, 6th June 2016, University of Greenwich. (Submitted)

model uncertainty

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Awad, B., Cipcigan, L.M. and Jenkins, N. (2010) Impact of residential charging of electric vehicles on distribution networks, a probabilistic approach. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

modeling processes

Mallik, S., Ekere, N.N., Marks, A.E., Seman, A. and Durairaj, R. (2010) Modeling the structural breakdown of solder paste using the structural kinetic model. Journal of Materials Engineering and Performance, 19 (1). pp. 40-45. ISSN 1059-9495 (Print), 1544-1024 (Online) (doi:10.1007/s11665-009-9448-0)

modelling

Arshad, Kamran (2010) Radio wave propagation modelling using finite element method: Novel approaches to model radio wave propagation and solve complex models efficiently using finite element analysis. LAP Lambert Academic Publishing. ISBN 9783843358019

Deng, T., Bingley, M.S., Bradley, M.S.A. and De Silva, S.R. (2008) A comparison of the gas-blast and centrifugal-accelerator erosion testers: The influence of particle dynamics. Wear, 265 (7-8). pp. 945-955. ISSN 0043-1648 (doi:10.1016/j.wear.2008.02.017)

Deng, Tong, Bingley, Mark S. and Bradley, Michael S. A. (2004) The influence of particle rotation on the solid particle erosion rate of metals. Wear, 256 (11-12). pp. 1037-1049. ISSN 0043-1648 (doi:10.1016/S0043-1648(03)00536-2)

Fei, Genyuan (2011) A methodology for engineering design change analysis using system modelling and knowledge management technologies. PhD thesis, University of Greenwich.

Monte Carlo approach

Okereke, Michael and Akpoyomare, Ambrose I. (2015) Virtual Testing Architecture for Prediction of Effective Properties of Particulate Composites. In: International Conference on Advances in Composite Materials and Structures. ICACMS, Istanbul Turkey, p. 4.

moulding sand

Shehu, T. and Bhatti, R.S. (2012) The use of Yam flour (starch) as binder for sand mould production in Nigeria. World Applied Sciences Journal, 16 (6). pp. 858-862. ISSN 1818-495 (doi:wasj/wasj16(6)12/14.pdf)

multi-agent

Gao, James and Jian, Amanda (2007) A multi-agent based knowledge search methodology for product development. Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.

multi-agent system technology

Karfopoulos, Evangelos L., Papadopoulos, Panagiotis, Skarvelis-Kazakos, Spyros, Grau, Inaki, Cipcigan, Liana M., Hatziargyriou, Nikos and Jenkins, Nick (2011) Introducing electric vehicles in the microgrids concept. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082212)

multi-agent systems

Skarvelis-Kazakos, Spyros, Rikos, Evangelos, Kolentini, Efstathia, Cipcigan, Liana M. and Jenkins, Nick (2013) Implementing agent-based emissions trading for controlling Virtual Power Plant emissions. Electric Power Systems Research, 102. ISSN 0378-7796 (doi:10.1016/j.epsr.2013.04.004)

multi-component gas mixture measurements

Tao, Mei and Seals, R.C. (1993) Multicomponent gas-mixture measurements using an array of gas sensors and an artificial neural-network. Journal of Microcomputer Applications, 16 (2). pp. 203-210. (doi:10.1006/jmca.1993.1018)

multi-user communication

Balasubramanyam, Ramkumar (2008) Adaptive iterative multiuser detection for wireless communication systems. PhD thesis, University of Greenwich.

multiagent systems

Karfopoulos, Evangelos L., Papadopoulos, Panagiotis, Skarvelis-Kazakos, Spyros, Grau, Inaki, Cipcigan, Liana M., Hatziargyriou, Nikos and Jenkins, Nick (2011) Introducing electric vehicles in the microgrids concept. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082212)

multiband antennas

Callaghan, Peter and Batchelor, John C. (2008) Dual-band pin-patch antenna for wi-fi applications. IEEE Antennas and Wireless Propagation Letters, 7. pp. 757-760. ISSN 1536-1225 (doi:10.1109/LAWP.2008.2004885)

multilingual

Gao, James and Bradfield, Daniel J. (2007) A methodology to facilitate knowledge sharing in the new product development process. International Journal of Production Research, 45 (7). pp. 1489-1504. ISSN 0020-7543 (doi:10.1080/00207540600942227)

Gao, James, Bradfield, Daniel J. and Soltan, Hossein (2007) Development of a tool to support the dissemination of information about knowledge in multilingual product development teams. In: Garetti, Marco, Terzi, Sergio, Ball, Peter D. and Han, Soonhung, (eds.) Proceedings of the International conference on product lifecycle management: assessing the industrial relevance. Inderscience Enterprises Ltd, Genva Aeroport, pp. 261-270. ISBN 9780907776321

multiple-band antennas

Callaghan, Peter and Batchelor, John C. (2008) Multiband low-profile antenna for remote antenna unit picocell applications. IEEE Transactions on Antennas and Propagation, 56 (8). pp. 2475-2480. ISSN 0018-926X (doi:10.1109/TAP.2008.927558)

negative impedance

Ali, M. Tanseer, Wu, Ruiheng, Callaghan, Peter and Rapajic, Predrag (2014) Highly linear RF amplifier design: theoretical analysis and experimental study. International Journal of Electronics, 101 (1). pp. 98-112. ISSN 0020-7217 (Print), 1362-3060 (Online) (doi:10.1080/00207217.2013.769189)

negative impedance compensation

Ali, M. Tanseer, Wu, Ruiheng, Callaghan, Peter and Rapajic, Predrag (2011) Design of a highly linear high frequency amplifier using Volterra model. In: Microwave, Antenna, Propagation, and EMC Technologies for Wireless Communications (MAPE). Microwave, Antenna, Propagation, and EMC Technologies for Wireless Communications (MAPE) . Institute of Electrical and Electronic Engineers, Pistacaway, USA, pp. 355-358. ISBN 978-1-4244-8268-9 (doi:10.1109/MAPE.2011.6156259)

Wu, Ruiheng, Lidgey, F.J. and Hayatleh, K. (2008) Design of differential amplifier with negative impedance compensation. 2008 4th International Conference on Circuits and Systems for Communications. Institute of Electrical and Electronics Engineers, New York, pp. 589-593. ISBN 9781424417070 (doi:10.1109/ICCSC.2008.131)

Wu, Ruiheng, Lidgey, F.J., Hayatleh, K. and Hart, B.L. (2010) Differential amplifier with improved gain-accuracy and linearity. Interntional Journal of Circuit Theory and Applications, 38 (8). pp. 829-844. ISSN 0098-9886 (doi:10.1002/cta.601)

Wu, Ruiheng and Wang, Chen (2008) Stability analysis of the amplifier with negative impedance compensation. 2008 51st Midwest Symposium on Circuits and Systems. Institute of Electrical and Electronics Engineers, New York, pp. 803-806. ISBN 9781424421664

network topology

Grau, I., Skarvelis-Kazakos, S., Papadopoulos, P., Cipcigan, L.M. and Jenkins, N. (2010) Electric vehicles support for intentional islanding: A prediction for 2030. In: 41st North American Power Symposium. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 1-5. ISBN 978-1-4244-4428-1 (Print), 978-1-4244-4429-8 (Online) (doi:10.1109/NAPS.2009.5484016)

neural networks

Chi, Xuesong (2008) A web-based intelligent learning environment for the teaching of industrial continuous quality improvement. PhD thesis, University of Greenwich.

new product design

Gao, James, Fei, Genyuan and Tang, X.Q. (2009) A TRIZ based methodology for the analysis of the coupling problems in complex engineering design. In: Proceedings of the 19th CIRP Design Conference – Competitive Design. Cranfield University Press, Cranfield University, pp. 285-292. ISBN 9780955743641

new product development

Gao, James and Bradfield, Daniel J. (2007) A methodology to facilitate knowledge sharing in the new product development process. International Journal of Production Research, 45 (7). pp. 1489-1504. ISSN 0020-7543 (doi:10.1080/00207540600942227)

Gao, James and Jian, Amanda (2007) A multi-agent based knowledge search methodology for product development. Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.

Jian, Guo (2011) Knowledge search for new product development: a multi-agent based methodology. PhD thesis, University of Greenwich.

Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.

Zhang, Pengcheng and Gao, James (2010) Requirements driven knowledge system design for product development. In: Proceedings of the 6th CIRP-Sponsored International Conference on Digital Enterprise Technology. Advances in Intelligent and Soft Computing, 66/201 . Springer, Hong Kong, pp. 169-184. ISBN 9783642104299 ISSN 1867-5662 (doi:10.1007/978-3-642-10430-5_13)

Zhang, Pengcheng, Gao, James and Wang, Yinglin (2011) Requirement driven knowledge management system design to support automotive product development. International Journal of Product Lifecycle Management (IJPLM), 5 (2-4). pp. 202-223. ISSN 1743-5110 (doi:10.1504/IJPLM.2011.043188)

new product development (NPD)

Hasan, Syed M. (2013) A collaborative framework for feasibility analysis in automotive product development with global supply chain. PhD thesis, University of Greenwich.

Tavakolikhou, Mehdi (2013) A knowledge sharing framework to support rapid prototyping in collaborative automotive supply chain. PhD thesis, University of Greenwich.

new product introduction

Gao, James, Baxter, David, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2007) An engineering design knowledge reuse methodology using process modelling. Research in Engineering Design, 18 (1). pp. 37-48. ISSN 0934-9839 (doi:10.1007/s00163-007-0028-8)

Mountney, S.L., Gao, James and Wiseall, S. (2007) A knowledge system to support manufacturing knowledge during preliminary design. International Journal of Production Research, 45 (7). pp. 1521-1537. ISSN 0020-7543 (doi:10.1080/00207540600942300)

new solder paste formulation

Ekere, N and Mallik, Sabuj (2008) A methodology for characterising new lead-free solder paste formulations used for flip-chip assembly applications. In: Kobayashi, Akira, (ed.) Smart processing technology: SPT '07. High Temperature Society of Japan, Ibaraki, Japan, pp. 59-64.

nonlinear control systems

Sangelaji, Z. and Banks, S.P. (2008) Control design and stabilization analysis of non-linear systems using angular representations. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 222 (6). pp. 457-463. ISSN 0959-6518 (Print), 2041-3041 (Online) (doi:10.1243/09596518JSCE502)

nonlinear system

Sangelaji, Z. and Banks, S.P. (2009) Radial control design for a class of nonlinear systems. Control and Intelligent Systems, 37 (3). pp. 144-151. ISSN 1480-1752 (Print), 1925-5810 (Online) (doi:10.2316/Journal.201.2009.3.201-2018)

Sangelaji, Zahra (2012) Stabilisation of Multi-Input Nonlinear Systems Using Associated Angular Approach. In: Control (CONTROL), 2012 UKACC International Conference on. IEEE, pp. 485-489. ISBN 9781467315593 (doi:10.1109/CONTROL.2012.6334678)

nonlinear systems

Sangelaji, Z. and Banks, S.P. (2009) Stabilisation of nonlinear systems using weighted angular method. IET Control Theory & Applications, 3 (4). pp. 445-451. ISSN 1751-8644 (Print), 1751-8652 (Online) (doi:10.1049/iet-cta.2007.0318)

Sangelaji, Zahra and Banks, Steve (2008) Dynamical Radial Control of Nonlinear Systems. In: Proceedings of the UKACC International Conference on Control 2008. UKACC, pp. 1-5. ISBN 9780955615214

NPD

Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.

Zhang, Pengcheng, Gao, James and Wang, Yinglin (2011) Requirement driven knowledge management system design to support automotive product development. International Journal of Product Lifecycle Management (IJPLM), 5 (2-4). pp. 202-223. ISSN 1743-5110 (doi:10.1504/IJPLM.2011.043188)

numerical simulation

Than Soe, Muang (2013) Vibration-based finite element model updating and structural damage identification. PhD thesis, University of Greenwich.

ontology

Aziz, Hayder, Li, Zhengxi and Gao, James (2008) Engineering design knowledge management in de-centralised virtual enterprises. Computer Aided Design and Applications, 5 (6). pp. 787-800. ISSN 1686-4360 (doi:10.3722/cadaps.2008.787-800)

Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2008) Knowledge reuse in manufacturability analysis. Robotics and Computer Integrated Manufacturing, 24 (4). pp. 508-513. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.003)

Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2009) Manufacturing knowledge verification in design support systems. International Journal of Production Research, 47 (12). pp. 3179-3204. ISSN 0020-7543 (Print), 1366–588X (Online) (doi:10.1080/00207540701802452)

Gao, James and Bradfield, Daniel J. (2007) A methodology to facilitate knowledge sharing in the new product development process. International Journal of Production Research, 45 (7). pp. 1489-1504. ISSN 0020-7543 (doi:10.1080/00207540600942227)

Gao, James, Bradfield, Daniel J. and Soltan, Hossein (2007) A metaknowledge approach to facilitate knowledge sharing in the global product development process. Computer-Aided Design and Applications, 4 (1-4). pp. 519-528. ISSN 1686-4360 (doi:10.3722/cadaps.2007.519-528)

Gao, James, Cheung, W.M., Bramall, D.G., Maropoulos, Paul G. and Aziz, Hayder (2006) Organizational knowledge encapsulation and re-use in collaborative product development. International Journal of Computer Integrated Manufacturing, 19 (7). pp. 736-750. ISSN 0951-192X (doi:10.1080/09511920500504479)

Open source design

Seals, Richard (2016) Stimulating the student through experimental activity. In: SHIFT16 : Annual Festival of Learning and Teaching, 8th January 2016, University of Greenwich.

operation sequencing

Mwinkuka, T., Hinduja, S. and Owodunni, Oladele (2007) Extendible operation sequencing for turn-milled components. CIRP Annals - Manufacturing Technology, 56 (1). pp. 473-478. ISSN 0007-8506 (doi:10.10.1016/j.cirp.2007.05.113)

optimisation

Eadie, R. and Gao, James (2008) An industrial implementation of a methodology for the optimisation of product design tolerances. In: Kai, Cheng, Makatsoris, Harris C. and Harrison, David, (eds.) Advances in manufacturing technology XXII: the proceedings of the 6th International Conference on Manufacturing Research ICMR08, 9th-11th September 2008, London UK. Brunel University College, Brunel University, pp. 161-170. ISBN 9781902316604

optimization

Skarvelis-Kazakos, Spyros, Papadopoulos, Panagiotis, Grau, Iñaki, Gerber, Annelies, Cipcigan, Liana M., Jenkins, Nick and Carradore, Loredana (2010) Carbon optimized virtual power plant with electric vehicles. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

organisational characteristics

Koufopoulos, Dimitrios N., Coutroubis, Alec and Lagoudis, Ioannis N. (2007) One size does not fit all: revisiting conceptual wisdom by assessing corporate governance practices of the Greek shipping management companies. In: International Association of Maritime Economists, IAME, Greece Challenges and Trends in Shipping, Markets, Investments and Policies, 4-6 July 2007, Athens. (Unpublished)

organizational knowledge-based system

Gao, James, Cheung, W.M., Bramall, D.G., Maropoulos, Paul G. and Aziz, Hayder (2006) Organizational knowledge encapsulation and re-use in collaborative product development. International Journal of Computer Integrated Manufacturing, 19 (7). pp. 736-750. ISSN 0951-192X (doi:10.1080/09511920500504479)

Orthotics

Le, C.H., Okereke, M.I., Nguyen, V.H., Dao, V.D., Soe, S., Zlatov, N. and Le, T.H. (2011) Personalised medical product development: Methods, challenges and opportunities. Romanian Review Precision Mechanics, Optics and Mechatronics, 40. pp. 11-20. ISSN 1584-5982

part-loading

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2010) Micro-generation for 2050: life-cycle carbon footprint of micro-generation sources. In: 2009 44th International Universities’ Power Engineering Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-6823-2

particle dynamics

Deng, T., Bingley, M.S., Bradley, M.S.A. and De Silva, S.R. (2008) A comparison of the gas-blast and centrifugal-accelerator erosion testers: The influence of particle dynamics. Wear, 265 (7-8). pp. 945-955. ISSN 0043-1648 (doi:10.1016/j.wear.2008.02.017)

particle spin

Deng, Tong, Bingley, Mark S. and Bradley, Michael S. A. (2004) The influence of particle rotation on the solid particle erosion rate of metals. Wear, 256 (11-12). pp. 1037-1049. ISSN 0043-1648 (doi:10.1016/S0043-1648(03)00536-2)

Particle swarm optimization

Bui, Trung Thanh, Parnichkun, M and Le, Chi (2010) Structure-specified H loop shaping control for balancing of bicycle robots: A particle swarm optimization approach. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 224 (7). pp. 857-867. ISSN 0959-6518 (Print), 2041-3041 (Online) (doi:10.1243/09596518JSCE950)

particles

Durairaj, Rajkumar, Ekere, Ndy, Salam, B., Jackson, G. and He, Da (2003) Monte Carlo study of solder paste microstructure and ultra-fine-pitch stencil printing. Journal of Materials Science: Materials in Electronics, 14 (8). pp. 501-506. ISSN 0957-4522 (doi:10.1023/A:1023929119055)

particulate

Okereke, Michael and Akpoyomare, Ambrose I. (2015) Virtual Testing Architecture for Prediction of Effective Properties of Particulate Composites. In: International Conference on Advances in Composite Materials and Structures. ICACMS, Istanbul Turkey, p. 4.

peer-to-peer

Aziz, Hayder, Li, Zhengxi and Gao, James (2008) Engineering design knowledge management in de-centralised virtual enterprises. Computer Aided Design and Applications, 5 (6). pp. 787-800. ISSN 1686-4360 (doi:10.3722/cadaps.2008.787-800)

Cheung, W.M., Matthews, P.C., Gao, J.X. and Maropoulos, P.G. (2008) Advanced product development integration architecture: an out-of-box solution to support distributed production networks. International Journal of Production Research, 46 (12). pp. 3185-3206. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:10.1080/00207540601039767)

periodic boundary conditions

Okereke, M. I. and Akpoyomare, A. I. (2013) A virtual framework for prediction of full-field elastic response of unidirectional composites. Computational Materials Science, 70. pp. 82-99. ISSN 0927-0256 (Online) (doi:10.1016/j.commatsci.2012.12.036)

Okereke, Michael and Akpoyomare, Ambrose I. (2015) Virtual Testing Architecture for Prediction of Effective Properties of Particulate Composites. In: International Conference on Advances in Composite Materials and Structures. ICACMS, Istanbul Turkey, p. 4.

Personal Communication Service (PCS 1900) band

Callaghan, Peter, Sagor, Md. Hasanuzzaman and Batchelor, John C. (2011) Control of ground plane influence on antenna radiation pattern for mobile handheld devices. In: 2011 Loughborough Antennas and Propagation Conference (LAPC). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-4. ISBN 978-1-4577-1014-8 (doi:10.1109/LAPC.2011.6114127)

Personalised health care

Le, C.H., Okereke, M.I., Nguyen, V.H., Dao, V.D., Soe, S., Zlatov, N. and Le, T.H. (2011) Personalised medical product development: Methods, challenges and opportunities. Romanian Review Precision Mechanics, Optics and Mechatronics, 40. pp. 11-20. ISSN 1584-5982

pin-loaded patches

Callaghan, Peter and Batchelor, John C. (2008) Dual-band pin-patch antenna for wi-fi applications. IEEE Antennas and Wireless Propagation Letters, 7. pp. 757-760. ISSN 1536-1225 (doi:10.1109/LAWP.2008.2004885)

pipelines

Hettiaratchi, Kaushika (2006) A comparison between the pressure gradients in vertical and horizontal pneumatic conveying, with an investigation into the effect of pipeline bore in vertical conveying. PhD thesis, University of Greenwich.

pipes

Kessel, Stephen Ronald (1985) The interaction between rotary valves and pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

plan do check acts

Piorkowski, B.A., Evans, R.D. and Gao, J.X. (2011) Development of a face-to-face meeting capture and indexing process. In: Proceedings of the 2011 15th International Conference on Computer Supported Cooperative Work in Design, CSCWD2011. IEEE Computer Society, Piscataway, NJ, USA, pp. 4-8. ISBN 9781457703867 (doi:10.1109/CSCWD.2011.5960047)

PLM

Aziz, Hayder, Li, Zhengxi and Gao, James (2008) Engineering design knowledge management in de-centralised virtual enterprises. Computer Aided Design and Applications, 5 (6). pp. 787-800. ISSN 1686-4360 (doi:10.3722/cadaps.2008.787-800)

Baxter, David, Doultsinou, Athanasia, Roy, Rajkumar and Gao, James (2010) A life cycle model for product-service systems design. In: 5th International Conference on Digital Enterprise Technology. Publibook, Paris, France, pp. 441-456.

Plytron

Okereke, M. I. and Akpoyomare, A. I. (2013) A virtual framework for prediction of full-field elastic response of unidirectional composites. Computational Materials Science, 70. pp. 82-99. ISSN 0927-0256 (Online) (doi:10.1016/j.commatsci.2012.12.036)

pneumatic conveying

Hettiaratchi, Kaushika (2006) A comparison between the pressure gradients in vertical and horizontal pneumatic conveying, with an investigation into the effect of pipeline bore in vertical conveying. PhD thesis, University of Greenwich.

pneumatic conveying systems

Jones, Mark G. (1988) The influence of bulk particulate properties on pneumatic conveying performance. PhD thesis, Thames Polytechnic.

pneumatic machinery

Jones, Mark G. (1988) The influence of bulk particulate properties on pneumatic conveying performance. PhD thesis, Thames Polytechnic.

pneumatic systems

Kessel, Stephen Ronald (1985) The interaction between rotary valves and pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

Polymer Composites

Lakshman, Biju, Deng, Tong, Bradley, Michael S. A., Okereke, Michael and McIlhagger, A. T. (2014) Erosive wear of polymer composite materials and its correlation with high strain rate mechanical properties. In: 2nd International Conference on Abrasive Processes - ICAP 2014 (Programme and Abstract Book). ICAP, Cambridge, United Kingdom, p. 24.

polypropylene

Okereke, M.I., Buckley, C.P. and Siviour, C.R. (2012) Compression of polypropylene across a wide range of strain rates. Mechanics of Time-Dependent Materials, 16 (4). pp. 361-379. ISSN 1385-2000 (Print), 1573-2738 (Online) (doi:10.1007/s11043-012-9167-z)

potential systems

Soroka, A.J. and Hieu, L.C. (2011) Design challenges for implementing a customer driven mass-customisation system. In: Proceedings - INDIN 2011: 2011 9th IEEE International Conference on Industrial Informatics. Institute of Electrical and Electronics Engineers Inc, Piscataway, USA, pp. 857-862. ISBN 9781457704338 (Online), 9781457704352 (Print) (doi:10.1109/INDIN.2011.6035005)

power generation

Grau, I., Skarvelis-Kazakos, S., Papadopoulos, P., Cipcigan, L.M. and Jenkins, N. (2010) Electric vehicles support for intentional islanding: A prediction for 2030. In: 41st North American Power Symposium. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 1-5. ISBN 978-1-4244-4428-1 (Print), 978-1-4244-4429-8 (Online) (doi:10.1109/NAPS.2009.5484016)

Khan, Naushad Salim (2008) Handling characteristics of coal/biomass mixes: measurements and establishing benchmarks. PhD thesis, University of Greenwich.

power generation dispatch

Raab, A. F., Ferdowsi, M., Karfopoulos, E., Unda, I. Grau, Skarvelis-Kazakos, S., Papadopoulos, P., Abbasi, E., Cipcigan, L.M., Jenkins, N., Hatziargyriou, N. and Strunz, K. (2011) Virtual power plant control concepts with electric vehicles. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082214)

power system control

Raab, A. F., Ferdowsi, M., Karfopoulos, E., Unda, I. Grau, Skarvelis-Kazakos, S., Papadopoulos, P., Abbasi, E., Cipcigan, L.M., Jenkins, N., Hatziargyriou, N. and Strunz, K. (2011) Virtual power plant control concepts with electric vehicles. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082214)

power system operators

Karfopoulos, Evangelos L., Papadopoulos, Panagiotis, Skarvelis-Kazakos, Spyros, Grau, Inaki, Cipcigan, Liana M., Hatziargyriou, Nikos and Jenkins, Nick (2011) Introducing electric vehicles in the microgrids concept. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082212)

power systems

Grau, I., Skarvelis-Kazakos, S., Papadopoulos, P., Cipcigan, L.M. and Jenkins, N. (2010) Electric vehicles support for intentional islanding: A prediction for 2030. In: 41st North American Power Symposium. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 1-5. ISBN 978-1-4244-4428-1 (Print), 978-1-4244-4429-8 (Online) (doi:10.1109/NAPS.2009.5484016)

predictions

Amalu, Emeka Hyginus (2012) Modelling of the reliability of flip chip lead-free solder joints at high-temperature excursions. PhD thesis, University of Greenwich.

predictive modelling

Okereke, Michael and Akpoyomare, Ambrose I. (2015) Virtual Testing Architecture for Prediction of Effective Properties of Particulate Composites. In: International Conference on Advances in Composite Materials and Structures. ICACMS, Istanbul Turkey, p. 4.

pressure vessels

Kessel, Stephen Ronald (1985) The interaction between rotary valves and pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

printed circuit boards (PCBs)

Amalu, E.H, Ekere, N.N. and Aminu, G. (2011) Effects of inter-metallic compound on high temperature reliability of flip chip interconnects for fine pitch applications. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 208-213. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145173)

printing

Mallik, Sabuj (2010) Rheological characterisation and modelling of electronic materials: time-dependent behaviours of lead-free solder pastes and flux mediums. LAP Lambert Academic Publishing GmbH & Co. KG, Saarbrücken, Germany. ISBN 978-3-8433-7771-3

printing performance

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2008) Effect of long-term aging on the rheological characteristics and printing performance of lead-free solder pastes used for flip-chip assembly. Smart Processing Technology, 2. pp. 131-134.

Mallik, Sabuj, Thieme, Jens, Bauer, R., Ekere, Ndy, Seman, Anton, Bhatti, Rajinderpal and Durairaj, Rajkumar (2010) Study of the rheological behaviour of Sn-Ag-Cu solder pastes and their correlation with printing performance. In: EPTC 2009 Proceedings of 2009 11th Electronics Packaging Technology Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 869-874. ISBN 978-1-4244-5099-2 (Print), 978-1-4244-5100-5 (e-ISBN) (doi:10.1109/EPTC.2009.5416423)

printing processes

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2007) Effect of abandon time on print quality and rheological characteristics for lead-free solder pastes used for flip-chip assembly. 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. Ieee/Cpmt International Electronics Manufacturing Technology Symposium . Institute of Electrical and Electronics Engineers, New York, USA, pp. 14-19. ISBN 9781424413355 (doi:10.1109/IEMT.2007.4417048)

probabilistic approach

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Awad, B., Cipcigan, L.M. and Jenkins, N. (2010) Impact of residential charging of electric vehicles on distribution networks, a probabilistic approach. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2012) Electric vehicles' impact on British distribution networks. IET Electrical Systems in Transportation, 2 (3). pp. 91-102. ISSN 2042-9738 (doi:10.1049/iet-est.2011.0023)

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2011) Predicting Electric Vehicle impacts on residential distribution networks with distributed generation. In: 2010 IEEE Vehicle Power and Propulsion Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-8220-7 (doi:10.1109/VPPC.2010.5729009)

probability

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Awad, B., Cipcigan, L.M. and Jenkins, N. (2010) Impact of residential charging of electric vehicles on distribution networks, a probabilistic approach. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

probability theory

Moorman, John Everard (2005) A method for the probabilistic method assessment of structures containing defects. PhD thesis, University of Greenwich.

process engineering

Owonikoko, Aminu (2012) Predicting storage vessel geometry requirements for discharge of extreme shape materials. MPhil thesis, University of Greenwich.

process improvement

Bhatti, R. and Berkhauer-Smith, S. (2007) An integrated methodology of manufacturing business improvement strategies. In: Olhager, J. and Persson, F., (eds.) Advances in production management systems. International Federation for Information Processing, 246 . Springer, Boston, USA, pp. 355-362. ISBN 9780387741567 (doi:http://link.springer.com/chapter/10.1007/978-0-387-74157-4_42)

process improvements

Bhatti, Rajinderpal and Berkhauer-Smith, Samantha (2007) Integrating both technical and cultural aspects of process improvement. In: 5th International Conference on Manufacturing Research (ICMR 2007), 11- 13 September 2007, De Montfort University Leicester. (Unpublished)

processing technology

Otiaba, K.C., Ekere, N.N., Amalu, E.H., Bhatti, R.S. and Mallik, S. (2012) Thermal management materials for electronic control unit: trends, processing technology and R and D challenges. Advanced Materials Research, 367. pp. 301-307. ISSN 1022-6680 (Print), 1662-8985 (Online) (doi:10.4028/www.scientific.net/AMR.367.301)

Otiaba, K.C., Ekere, N.N., Amalu, E.H., Bhatti, R.S. and Mallik, S. (2010) Thermal management materials for electronic control unit: trends, processing technology and R&D challenges. In: International Conference on Engineering Research & Development: Advances in Engineering Science & Technology, 7-9 September 2010, Benin City, Africa.

product

Piorkowski, Barry Andrew, Gao, James Xiaoyu, Evans, Richard David and Martin, Nick (2012) A dynamic knowledge management framework for the high value manufacturing industry. International Journal of Production Research, 51 (7). pp. 2176-2185. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:10.1080/00207543.2012.709650)

product data management

Gao, James, Cheung, W.M., Bramall, D.G., Maropoulos, Paul G. and Aziz, Hayder (2006) Organizational knowledge encapsulation and re-use in collaborative product development. International Journal of Computer Integrated Manufacturing, 19 (7). pp. 736-750. ISSN 0951-192X (doi:10.1080/09511920500504479)

product design process

Fei, Genyuan (2011) A methodology for engineering design change analysis using system modelling and knowledge management technologies. PhD thesis, University of Greenwich.

product designers

Soroka, A.J. and Hieu, L.C. (2011) Design challenges for implementing a customer driven mass-customisation system. In: Proceedings - INDIN 2011: 2011 9th IEEE International Conference on Industrial Informatics. Institute of Electrical and Electronics Engineers Inc, Piscataway, USA, pp. 857-862. ISBN 9781457704338 (Online), 9781457704352 (Print) (doi:10.1109/INDIN.2011.6035005)

product development

Baxter, David, Roy, Rajkumar, Doultsinou, Athanasia, Gao, James and Kalta, Mohamad (2009) A knowledge management framework to support product-service systems design. International Journal of Computer Integrated Manufacturing, 22 (12). pp. 1073-1088. ISSN 0951-192X (Print), 1362-3052 (Online) (doi:10.1080/09511920903207464)

Gao, James and Baxter, David (2007) Enabling technologies and frameworks for new product development: a selection of papers from ICMR2005. International Journal of Production Research, 45 (7). pp. 1485-1487. ISSN 0020-7543 (doi:10.1080/00207540600942201)

Gao, James, Bradfield, Daniel J. and Soltan, Hossein (2007) Development of a tool to support the dissemination of information about knowledge in multilingual product development teams. In: Garetti, Marco, Terzi, Sergio, Ball, Peter D. and Han, Soonhung, (eds.) Proceedings of the International conference on product lifecycle management: assessing the industrial relevance. Inderscience Enterprises Ltd, Genva Aeroport, pp. 261-270. ISBN 9780907776321

product development integration architecture

Cheung, W.M., Matthews, P.C., Gao, J.X. and Maropoulos, P.G. (2008) Advanced product development integration architecture: an out-of-box solution to support distributed production networks. International Journal of Production Research, 46 (12). pp. 3185-3206. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:10.1080/00207540601039767)

product development process

Jian, Guo (2011) Knowledge search for new product development: a multi-agent based methodology. PhD thesis, University of Greenwich.

Jian, Guo, Gao, James and Wang, Yinglin (2010) A multi-agent based knowledge search framework to support the product development process. International Journal of Computer Integrated Manufacturing, 23 (3). pp. 237-247. ISSN 0951-192X (doi:10.1080/09511920903529222)

product knowledge analysis

Baxter, David, Rajkumar, Roy and Gao, James (2008) Design process knowledge reuse challenges and issues. Computer Aided Design and Applications, 5 (6). pp. 942-952. ISSN 1686-4360 (doi:10.3722/cadaps.2008.942-952)

product life cycle management

Piorkowski, B.A., Evans, R.D. and Gao, J.X. (2011) Development of a face-to-face meeting capture and indexing process. In: Proceedings of the 2011 15th International Conference on Computer Supported Cooperative Work in Design, CSCWD2011. IEEE Computer Society, Piscataway, NJ, USA, pp. 4-8. ISBN 9781457703867 (doi:10.1109/CSCWD.2011.5960047)

product lifecycle management

Baxter, David, Doultsinou, Athanasia, Roy, Rajkumar and Gao, James (2010) A life cycle model for product-service systems design. In: 5th International Conference on Digital Enterprise Technology. Publibook, Paris, France, pp. 441-456.

Cheung, W.M., Matthews, P.C., Gao, J.X. and Maropoulos, P.G. (2008) Advanced product development integration architecture: an out-of-box solution to support distributed production networks. International Journal of Production Research, 46 (12). pp. 3185-3206. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:10.1080/00207540601039767)

Gao, James, Baxter, David, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2007) An engineering design knowledge reuse methodology using process modelling. Research in Engineering Design, 18 (1). pp. 37-48. ISSN 0934-9839 (doi:10.1007/s00163-007-0028-8)

product planning

Piorkowski, Barry Andrew, Gao, James Xiaoyu, Evans, Richard David and Martin, Nick (2012) A dynamic knowledge management framework for the high value manufacturing industry. International Journal of Production Research, 51 (7). pp. 2176-2185. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:10.1080/00207543.2012.709650)

product service system

Zhu, Haihua, Gao, James, Li, Dongbo and Tang, Dunbing (2012) A Web-based Product Service System for aerospace maintenance, repair and overhaul services. Computers in Industry, 63 (4). pp. 338-348. ISSN 0166-3615 (doi:10.1016/j.compind.2012.02.016)

product-service systems

Baxter, David, Doultsinou, Athanasia, Roy, Rajkumar and Gao, James (2010) A life cycle model for product-service systems design. In: 5th International Conference on Digital Enterprise Technology. Publibook, Paris, France, pp. 441-456.

Doultsinou, Athanasia, Roy, Rajkumar, Baxter, David, Gao, James and Mann, Andy (2009) Developing a service knowledge reuse framework for engineering design. Journal of Engineering Design, 20 (4). pp. 389-411. ISSN 0954-4828 (Print), 1466-1837 (Online) (doi:10.1080/09544820903149354)

products and services

Soroka, A.J. and Hieu, L.C. (2011) Design challenges for implementing a customer driven mass-customisation system. In: Proceedings - INDIN 2011: 2011 9th IEEE International Conference on Industrial Informatics. Institute of Electrical and Electronics Engineers Inc, Piscataway, USA, pp. 857-862. ISBN 9781457704338 (Online), 9781457704352 (Print) (doi:10.1109/INDIN.2011.6035005)

profit

Piorkowski, Barry Andrew, Gao, James Xiaoyu, Evans, Richard David and Martin, Nick (2012) A dynamic knowledge management framework for the high value manufacturing industry. International Journal of Production Research, 51 (7). pp. 2176-2185. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:10.1080/00207543.2012.709650)

project success rate

Bhatti, Rajinderpal and Berkhauer-Smith, Samantha (2007) Integrating both technical and cultural aspects of process improvement. In: 5th International Conference on Manufacturing Research (ICMR 2007), 11- 13 September 2007, De Montfort University Leicester. (Unpublished)

proof of concept

Piorkowski, B.A., Evans, R.D. and Gao, J.X. (2011) Development of a face-to-face meeting capture and indexing process. In: Proceedings of the 2011 15th International Conference on Computer Supported Cooperative Work in Design, CSCWD2011. IEEE Computer Society, Piscataway, NJ, USA, pp. 4-8. ISBN 9781457703867 (doi:10.1109/CSCWD.2011.5960047)

prototypes

Ermis, Ertan (2011) Establishment of a repeatable test procedure for measuring adhesion strength of particulates in contact with surfaces. PhD thesis, University of Greenwich.

PSS

Baxter, David, Doultsinou, Athanasia, Roy, Rajkumar and Gao, James (2010) A life cycle model for product-service systems design. In: 5th International Conference on Digital Enterprise Technology. Publibook, Paris, France, pp. 441-456.

pumps

Kessel, Stephen Ronald (1985) The interaction between rotary valves and pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

quality

Chi, Xuesong (2008) A web-based intelligent learning environment for the teaching of industrial continuous quality improvement. PhD thesis, University of Greenwich.

quality control

Durairaj, Rajkumar, Mallik, Sabuj and Ekere, Ndy (2008) Solder paste characterisation: towards the development of quality control (QC) tool. Soldering & Surface Mount Technology, 20 (3). pp. 34-40. ISSN 0954-0911 (doi:10.1108/09540910810885705)

radial control

Sangelaji, Z. and Banks, S.P. (2009) Radial control design for a class of nonlinear systems. Control and Intelligent Systems, 37 (3). pp. 144-151. ISSN 1480-1752 (Print), 1925-5810 (Online) (doi:10.2316/Journal.201.2009.3.201-2018)

Sangelaji, Zahra (2012) Stabilisation of Multi-Input Nonlinear Systems Using Associated Angular Approach. In: Control (CONTROL), 2012 UKACC International Conference on. IEEE, pp. 485-489. ISBN 9781467315593 (doi:10.1109/CONTROL.2012.6334678)

Sangelaji, Zahra and Banks, Steve (2008) Dynamical Radial Control of Nonlinear Systems. In: Proceedings of the UKACC International Conference on Control 2008. UKACC, pp. 1-5. ISBN 9780955615214

radial systems

Sangelaji, Z. and Banks, S.P. (2009) Stabilisation of nonlinear systems using weighted angular method. IET Control Theory & Applications, 3 (4). pp. 445-451. ISSN 1751-8644 (Print), 1751-8652 (Online) (doi:10.1049/iet-cta.2007.0318)

radio frequency identification

Rapajic, Predrag, Kabir, Ahsaul, Huang, Kao-Cheng and Wu, Ruiheng (2007) Next generation identity card: RFID-based automatic access control system for universities. In: Kartalopoulos, Stamatios, Demiralp, Metin, Mastorakis, Nikos, Soni, Ritu and Nassar, Hamed, (eds.) Selected Topics on Circuits, Systems, Electronics, Control & Signal Processing: Proceedings of the 6th WSEAS International Conference on Circuits, Systems, Electronics, Control & Signal Processing. Electrical and Computer Engineering . WSEAS Press, Singapore, pp. 480-483. ISBN 9789606766282

radio over fiber

Callaghan, Peter and Batchelor, John C. (2008) Dual-band pin-patch antenna for wi-fi applications. IEEE Antennas and Wireless Propagation Letters, 7. pp. 757-760. ISSN 1536-1225 (doi:10.1109/LAWP.2008.2004885)

radio signal processing

Rapajic, Predrag, Kabir, Ahsaul, Huang, Kao-Cheng and Wu, Ruiheng (2007) Next generation identity card: RFID-based automatic access control system for universities. In: Kartalopoulos, Stamatios, Demiralp, Metin, Mastorakis, Nikos, Soni, Ritu and Nassar, Hamed, (eds.) Selected Topics on Circuits, Systems, Electronics, Control & Signal Processing: Proceedings of the 6th WSEAS International Conference on Circuits, Systems, Electronics, Control & Signal Processing. Electrical and Computer Engineering . WSEAS Press, Singapore, pp. 480-483. ISBN 9789606766282

radio wave propagation

Arshad, Kamran (2010) Radio wave propagation modelling using finite element method: Novel approaches to model radio wave propagation and solve complex models efficiently using finite element analysis. LAP Lambert Academic Publishing. ISBN 9783843358019

rapid prototyping

Chowdary, Boppana V., Sahatoo, Divesh R. and Bhatti, Raj (2007) Some STL file generation issues in rapid prototyping. In: Esparragoza, Ivan E., Bermudez, Manuel and Petrie, Maria Larrondo, (eds.) 5th Latin American and Caribbean Conference for Engineering and Technology Developing Entrepreneural Engineers for the Sustainable Growth of Latin American and Caribbean: Education, Innovation, Technology, and Practice. Latin American and Caribbean Consortium of Engineering Institutions, Florida. ISBN 098228960X

Sahatoo, Divesh, Chowdary, Boppana V., Ali, Fahraz F. and Bhatti, Rajinderpal (2008) Slicing issues in CAD translation to STL in rapid prototyping. Proceedings of The 2008 IAJC-IJME International Conference. International Association of Journals and Conferences/International Journal of Modern Engineering, California State University, Northridge. ISBN 9781606433799

RC Neuron Modelling

Balisson, Dushan and Melis, Wim J.C. (2016) Hierarchical neural network model with intrinsic timing. In: International Conference on Applied System Innovation 2016. IEEE. (Submitted)

recursive least square (RLS)

Eneh, T., Rapajic, P., Anang, K., Bakalis, P. and Bello, L. (2012) Information capacity of adaptive MIMO OFDM wireless communication systems. In: Adaptive Science and Technology (ICAST). Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 157-164. ISBN 978-1-4673-0758-1 (doi:10.1109/ICASTech.2011.6145168)

reflow profile

Amalu, Emeka H., Lui, Y.T., Ekere, Ndy, Bhatti, R.S. and Takyi, G. (2011) Investigation of the effects of reflow profile parameters on lead-free solder bump volumes and joint integrity. In: AIP Conference Proceedings. American Institute of Physics, Melville, NY, USA, pp. 639-644. (doi:10.1063/1.3552519)

reinforced concrete structures

Yang, Shangtong (2010) Concrete crack width under combined reinforcement corrosion and applied load. PhD thesis, University of Greenwich.

remanufacturing and recycling technologies

Piorkowski, Barry, Gao, James and Evans, Richard (2011) A case-study: finding references to product development knowledge from analysis of face-to-face meetings. In: Glocalized Solutions for Sustainability in Manufacturing Proceedings of the 18th CIRP International Conference on Life Cycle Engineering. Springer, New York, USA, pp. 564-569. ISBN 978-3642196911 (doi:10.1007/978-3-642-19692-8-98)

remote antenna units

Callaghan, Peter and Batchelor, John C. (2008) Dual-band pin-patch antenna for wi-fi applications. IEEE Antennas and Wireless Propagation Letters, 7. pp. 757-760. ISSN 1536-1225 (doi:10.1109/LAWP.2008.2004885)

remote networks

Ma, Mingchao (2007) Distributed RBAC for subscription-based remote network services. PhD thesis, University of Greenwich.

renewable energy

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2009) Micro-generation for 2050: emissions performances of micro-generation sources during operation. Pollack Periodica, 4 (2). pp. 89-99. ISSN 1788-1994 (Print), 1788-3911 (Online) (doi:10.1556/Pollack.4.2009.2.9)

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2010) Micro-generation for 2050: life-cycle carbon footprint of micro-generation sources. In: 2009 44th International Universities’ Power Engineering Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-6823-2

repair and overhaul (MRO)

Zhu, Haihua, Gao, James, Li, Dongbo and Tang, Dunbing (2012) A Web-based Product Service System for aerospace maintenance, repair and overhaul services. Computers in Industry, 63 (4). pp. 338-348. ISSN 0166-3615 (doi:10.1016/j.compind.2012.02.016)

representative volume element

Okereke, Michael and Akpoyomare, Ambrose I. (2015) Virtual Testing Architecture for Prediction of Effective Properties of Particulate Composites. In: International Conference on Advances in Composite Materials and Structures. ICACMS, Istanbul Turkey, p. 4.

requirement management

Zhang, Pengcheng and Gao, James (2010) Requirements driven knowledge system design for product development. In: Proceedings of the 6th CIRP-Sponsored International Conference on Digital Enterprise Technology. Advances in Intelligent and Soft Computing, 66/201 . Springer, Hong Kong, pp. 169-184. ISBN 9783642104299 ISSN 1867-5662 (doi:10.1007/978-3-642-10430-5_13)

requirements management

Baxter, David, Gao, James, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2008) A framework to integrate design knowledge reuse and requirements management in engineering design. Robotics and Computer-Integrated Manufacturing, 24 (4). pp. 585-593. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.010)

residential charging

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Awad, B., Cipcigan, L.M. and Jenkins, N. (2010) Impact of residential charging of electric vehicles on distribution networks, a probabilistic approach. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

residential distribution networks

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2012) Electric vehicles' impact on British distribution networks. IET Electrical Systems in Transportation, 2 (3). pp. 91-102. ISSN 2042-9738 (doi:10.1049/iet-est.2011.0023)

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2011) Predicting Electric Vehicle impacts on residential distribution networks with distributed generation. In: 2010 IEEE Vehicle Power and Propulsion Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-8220-7 (doi:10.1109/VPPC.2010.5729009)

resource aggregation

Grau, I., Papadopoulos, P., Skarvelis-Kazakos, S., Cipcigan, L.M. and Jenkins, N. (2010) Virtual power plants with electric vehicles. In: 2nd European Conference on SmartGrids and E-Mobility, 20-21 Oct 2010, Brussels, Belgium. (Unpublished)

reuse

Piorkowski, Barry, Gao, James and Evans, Richard (2011) A case-study: finding references to product development knowledge from analysis of face-to-face meetings. In: Glocalized Solutions for Sustainability in Manufacturing Proceedings of the 18th CIRP International Conference on Life Cycle Engineering. Springer, New York, USA, pp. 564-569. ISBN 978-3642196911 (doi:10.1007/978-3-642-19692-8-98)

rheological behaviour

Mallik, Sabuj, Ekere, Ndy, Marks, Antony, Seman, Anton and Durairaj, Rajkumar (2008) Modelling of the time-dependent flow behaviour of lead-free solder pastes used for flip-chip assembly applications. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 1219-1224. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684527)

rheological behaviours

Mallik, Sabuj (2009) Study of the time-dependent rheological behaviour of lead-free solder pastes and flux mediums used for flip-chip assembly applications. PhD thesis, University of Greenwich.

Mallik, Sabuj, Thieme, Jens, Bauer, R., Ekere, Ndy, Seman, Anton, Bhatti, Rajinderpal and Durairaj, Rajkumar (2010) Study of the rheological behaviour of Sn-Ag-Cu solder pastes and their correlation with printing performance. In: EPTC 2009 Proceedings of 2009 11th Electronics Packaging Technology Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 869-874. ISBN 978-1-4244-5099-2 (Print), 978-1-4244-5100-5 (e-ISBN) (doi:10.1109/EPTC.2009.5416423)

rheological characterisation

Ekere, N and Mallik, Sabuj (2008) A methodology for characterising new lead-free solder paste formulations used for flip-chip assembly applications. In: Kobayashi, Akira, (ed.) Smart processing technology: SPT '07. High Temperature Society of Japan, Ibaraki, Japan, pp. 59-64.

Mallik, S., Schmidt, M., Bauer, R. and Ekere, N.N. (2010) Evaluating solder paste behaviours through rheological test methods and their correlation to the printing performance. Soldering & Surface Mount Technology, 22 (4). pp. 42-49. ISSN 0954-0911 (doi:10.1108/09540911011076871)

rheological characteristics

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2008) Effect of long-term aging on the rheological characteristics and printing performance of lead-free solder pastes used for flip-chip assembly. Smart Processing Technology, 2. pp. 131-134.

rheological characterization

Durairaj, Rajkumar, Ekere, Ndy, Salam, B., Jackson, G. and He, Da (2003) Monte Carlo study of solder paste microstructure and ultra-fine-pitch stencil printing. Journal of Materials Science: Materials in Electronics, 14 (8). pp. 501-506. ISSN 0957-4522 (doi:10.1023/A:1023929119055)

rheology

Durairaj, R., Mallik, S., Seman, A. and Ekere, N.N. (2009) Investigation of wall-slip behaviour in lead-free solder pastes and isotropic conductive adhesives. Sadhana - Academy Proceedings in Engineering Sciences, 34 (5). pp. 799-810. ISSN 0256-2499 (Print), 0973-7677 (Online) (doi:10.1007/s12046-009-0046-5)

Durairaj, R., Mallik, S., Seman, A., Marks, A. and Ekere, N.N. (2009) Rheological characterisation of solder pastes and isotropic conductive adhesives used for flip-chip assembly. Journal of Materials Processing Technology, 209 (8). pp. 3923-3930. ISSN 0924-0136 (doi:10.1016/j.jmatprotec.2008.09.013)

Durairaj, R., Man, Lam Wai, Ekere, N.N. and Mallik, S. (2010) The effect of wall-slip formation on the rheological behaviour of lead-free solder pastes. Materials and Design, 31 (3). pp. 1056-1062. ISSN 0261-3069 (doi:10.1016/j.matdes.2009.09.051)

Durairaj, R., Ramesh, S., Mallik, S., Seman, A. and Ekere, N. (2009) Rheological characterisation and printing performance of Sn/Ag/Cu solder pastes. Materials and Design, 30 (9). pp. 3812-3818. ISSN 0261-3069 (doi:10.1016/j.matdes.2009.01.028)

Durairaj, Rajkumar, Mallik, Sabuj and Ekere, Ndy (2008) Solder paste characterisation: towards the development of quality control (QC) tool. Soldering & Surface Mount Technology, 20 (3). pp. 34-40. ISSN 0954-0911 (doi:10.1108/09540910810885705)

Durairaj, Rajkumar, Man, Lam Wai, Mallik, Sabuj and Ekere, Ndy (2009) Thixotropic studies of lead-based solder, lead-free solder and conductive adhesive pastes. In: 11th Electronic Material and Packaging Conference (EMAP), 1-3 Dec 2009, Penang, Malaysia. (Unpublished)

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2007) Effect of abandon time on print quality and rheological characteristics for lead-free solder pastes used for flip-chip assembly. 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. Ieee/Cpmt International Electronics Manufacturing Technology Symposium . Institute of Electrical and Electronics Engineers, New York, USA, pp. 14-19. ISBN 9781424413355 (doi:10.1109/IEMT.2007.4417048)

Mallik, S., Schmidt, M., Bauer, R. and Ekere, N.N. (2010) Evaluating solder paste behaviours through rheological test methods and their correlation to the printing performance. Soldering & Surface Mount Technology, 22 (4). pp. 42-49. ISSN 0954-0911 (doi:10.1108/09540911011076871)

Mallik, Sabuj (2010) Rheological characterisation and modelling of electronic materials: time-dependent behaviours of lead-free solder pastes and flux mediums. LAP Lambert Academic Publishing GmbH & Co. KG, Saarbrücken, Germany. ISBN 978-3-8433-7771-3

Mallik, Sabuj, Ekere, Ndy, Durairaj, Rajkumar and Marks, Antony (2008) An investigation into the rheological properties of different lead-free solder pastes for surface mount applications. Soldering & Surface Mount Technology, 20 (2). pp. 3-10. ISSN 0954-0911 (doi:1108/09540910810871511)

Mallik, Sabuj, Ekere, Ndy, Seman, Anton and Durairaj, Rajkumar (2009) Modelling the time-dependent behaviour of solder pastes used in the electronics assembly applications. In: 11th Electronic Material and Packaging Conference (EMAP 2009), 1-2 Dec 2009, Penang, Malaysia. (Unpublished)

Mallik, Sabuj, Schmidt, M., Bauer, R. and Ekere, Ndy (2008) Influence of solder paste components on rheological behaviour. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, USA, pp. 1135-1140. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684512)

Marks, A.E., Mallik, S., Ekere, N.N. and Seman, A. (2008) Effect of temperature on slumping behaviour of lead-free solder paste and its rheological simulation. 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 829-832. ISBN 97814244-28137 (Print), 978-1-4244-2814-4 (Electronic) (doi:10.1109/ESTC.2008.4684459)

routing protocols

Bello, Lawal (2013) Power conservation and performance analysis of mobile ad hoc wireless networks. PhD thesis, University of Greenwich.

SABER simulations

Naayagi, R.T., Forsyth, A.J. and Shuttleworth, R. (2011) Performance analysis of DAB DC-DC converter under zero voltage switching. In: Proceedings of the 2011 1st International Conference on Electrical Energy Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineering, Inc., Piscataway, NJ, USA, pp. 56-61. ISBN 9781612843780 (doi:10.1109/ICEES.2011.5725302)

Scheduling algorithms

Arshad, Kamran (2015) LTE system level performance in the presence of CQI feedback uplink delay and mobility. In: International Conference on Communications, Signal Processing, and their Applications (ICCSPA), 2015. IEEE, pp. 1-5. ISBN 978-1-4799-6532-8 (doi:10.1109/ICCSPA.2015.7081294)

scheduling applications

Chen, Li Choo (2007) Optimisation of rule-based testing for scheduling within a distributed computing environment. PhD thesis, University of Greenwich.

security

Ma, Mingchao (2007) Distributed RBAC for subscription-based remote network services. PhD thesis, University of Greenwich.

security block ciphers

Adekunle, A.A. and Woodhead, S.R. (2010) Zone based systems design framework for the realisation of efficient block cipher based message authentication code algorithms. In: ARES 2010 Fifth International Conference on Availability, Reliability, and Security15-18 February 2010 Krakow, Poland. Conference Publishing Services, IEEE Computer Society, Los Alamitos, California, pp. 216-221. ISBN 9781424458790 (doi:10.1109/ARES.2010.109)

semi-automatics

Piorkowski, B.A., Evans, R.D. and Gao, J.X. (2011) Development of a face-to-face meeting capture and indexing process. In: Proceedings of the 2011 15th International Conference on Computer Supported Cooperative Work in Design, CSCWD2011. IEEE Computer Society, Piscataway, NJ, USA, pp. 4-8. ISBN 9781457703867 (doi:10.1109/CSCWD.2011.5960047)

sequential power flows

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Awad, B., Cipcigan, L.M. and Jenkins, N. (2010) Impact of residential charging of electric vehicles on distribution networks, a probabilistic approach. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

service engineering

Gao, James, Baxter, David, Doultsinou, Nancy and Roy, Rajkumar (2007) Identification of service knowledge types for technical product-service systems. Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath, pp. 549-555.

service issues

Doultsinou, Athanasia, Roy, Rajkumar, Baxter, David and Gao, James (2008) Key service issues in two UK manufacturing companies from a PSS perspective. Proceedings of the Cranfield Multi-Strand Conference: Creating Wealth Through Research and Innovation (CMC 2008): 6-7 May 2008. Cranfield University Press, Cranfield University, pp. 287-292. ISBN 9780955743672

service knowledge

Doultsinou, Athanasia, Roy, Rajkumar, Baxter, David, Gao, James and Mann, Andy (2009) Developing a service knowledge reuse framework for engineering design. Journal of Engineering Design, 20 (4). pp. 389-411. ISSN 0954-4828 (Print), 1466-1837 (Online) (doi:10.1080/09544820903149354)

Gao, James, Baxter, David, Doultsinou, Nancy and Roy, Rajkumar (2007) Identification of service knowledge types for technical product-service systems. Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath, pp. 549-555.

service model

Zhu, Haihua, Gao, James, Li, Dongbo and Tang, Dunbing (2012) A Web-based Product Service System for aerospace maintenance, repair and overhaul services. Computers in Industry, 63 (4). pp. 338-348. ISSN 0166-3615 (doi:10.1016/j.compind.2012.02.016)

services sector

Koufopoulos, Dimitrios N., Coutroubis, Alec and Lagoudis, Ioannis N. (2007) One size does not fit all: revisiting conceptual wisdom by assessing corporate governance practices of the Greek shipping management companies. In: International Association of Maritime Economists, IAME, Greece Challenges and Trends in Shipping, Markets, Investments and Policies, 4-6 July 2007, Athens. (Unpublished)

shear testing

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2007) Effect of abandon time on print quality and rheological characteristics for lead-free solder pastes used for flip-chip assembly. 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. Ieee/Cpmt International Electronics Manufacturing Technology Symposium . Institute of Electrical and Electronics Engineers, New York, USA, pp. 14-19. ISBN 9781424413355 (doi:10.1109/IEMT.2007.4417048)

signal analysis

Seals, Richard and Eissa, Hazem (2016) Optimising data extraction from one dimensional distance sensors. In: The First Medway Engineering Conference on Systems: Efficiency, Sustainability and Modelling, 6th June 2016, University of Greenwich. (Submitted)

Signal to noise ratio

Arshad, Kamran (2015) LTE system level performance in the presence of CQI feedback uplink delay and mobility. In: International Conference on Communications, Signal Processing, and their Applications (ICCSPA), 2015. IEEE, pp. 1-5. ISBN 978-1-4799-6532-8 (doi:10.1109/ICCSPA.2015.7081294)

simulation

Durairaj, Rajkumar, Ekere, Ndy, Salam, B., Jackson, G. and He, Da (2003) Monte Carlo study of solder paste microstructure and ultra-fine-pitch stencil printing. Journal of Materials Science: Materials in Electronics, 14 (8). pp. 501-506. ISSN 0957-4522 (doi:10.1023/A:1023929119055)

simulation results

Wu, Ruiheng, Lidgey, F.J. and Hayatleh, K. (2007) Design of amplifiers with high gain accuracy and high linearity. 2007 50TH Midwest Symposium on Circuits and Systems. Midwest Symposium on Circuits and Systems Conference Proceedings, 1-3 . Institute of Electrical and Electronics Engineers, New York, pp. 269-272. ISBN 9781424411757 (doi:10.1109/MWSCAS.2007.4488586)

slip

Mallik, Sabuj, Ekere, Ndy, Durairaj, Rajkumar and Marks, Antony (2008) An investigation into the rheological properties of different lead-free solder pastes for surface mount applications. Soldering & Surface Mount Technology, 20 (2). pp. 3-10. ISSN 0954-0911 (doi:1108/09540910810871511)

smart charging

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2012) Electric vehicles' impact on British distribution networks. IET Electrical Systems in Transportation, 2 (3). pp. 91-102. ISSN 2042-9738 (doi:10.1049/iet-est.2011.0023)

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2011) Predicting Electric Vehicle impacts on residential distribution networks with distributed generation. In: 2010 IEEE Vehicle Power and Propulsion Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-8220-7 (doi:10.1109/VPPC.2010.5729009)

smart DC

Daniel, Simon, Skarvelis-Kazakos, Spryos and Jain, Priyanka (2013) Local smart DC networks and distributed storage for reducing and shifting peak load. In: 22nd International Conference on Electricity Distribution. IET/CIRED, Stockholm, Sweden.

smart grids

Karfopoulos, Evangelos L., Papadopoulos, Panagiotis, Skarvelis-Kazakos, Spyros, Grau, Inaki, Cipcigan, Liana M., Hatziargyriou, Nikos and Jenkins, Nick (2011) Introducing electric vehicles in the microgrids concept. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082212)

Raab, A. F., Ferdowsi, M., Karfopoulos, E., Unda, I. Grau, Skarvelis-Kazakos, S., Papadopoulos, P., Abbasi, E., Cipcigan, L.M., Jenkins, N., Hatziargyriou, N. and Strunz, K. (2011) Virtual power plant control concepts with electric vehicles. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082214)

snubber capacitor

Naayagi, R.T., Forsyth, A.J. and Shuttleworth, R. (2011) Performance analysis of DAB DC-DC converter under zero voltage switching. In: Proceedings of the 2011 1st International Conference on Electrical Energy Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineering, Inc., Piscataway, NJ, USA, pp. 56-61. ISBN 9781612843780 (doi:10.1109/ICEES.2011.5725302)

Naayagi, R.T., Shuttleworth, R. and Forsyth, A.J. (2011) Investigating the effect of snubber capacitor on high power IGBT turn-off. In: Proceedings of the 2011 1st International Conference on Electrical Energy Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineering, Inc., Piscataway, NJ, USA, pp. 50-55. ISBN 9781612843780 (doi:10.1109/ICEES.2011.5725301)

software errors

Chowdary, Boppana V., Sahatoo, Divesh R. and Bhatti, Raj (2007) Some STL file generation issues in rapid prototyping. In: Esparragoza, Ivan E., Bermudez, Manuel and Petrie, Maria Larrondo, (eds.) 5th Latin American and Caribbean Conference for Engineering and Technology Developing Entrepreneural Engineers for the Sustainable Growth of Latin American and Caribbean: Education, Innovation, Technology, and Practice. Latin American and Caribbean Consortium of Engineering Institutions, Florida. ISBN 098228960X

software systems

Chen, Li Choo (2007) Optimisation of rule-based testing for scheduling within a distributed computing environment. PhD thesis, University of Greenwich.

solder alloys

Amalu, Emeka Hyginus (2012) Modelling of the reliability of flip chip lead-free solder joints at high-temperature excursions. PhD thesis, University of Greenwich.

solder die attach

Otiaba, K.C., Bhatti, R.S., Ekere, N.N., Ekpu, M. and Adeyemi, J. (2011) Comparative study of the effects of coalesced and distributed solder die attach voids on thermal resistance of packaged semiconductor device. In: Collection of Papers Presented at the 17th International Workshop on THERMal INvestigation of ICs and Systems (THERMINIC' 2011). EDA Publishing Association, Grenoble, France, pp. 115-119. ISBN 9782355000188

solder joint

Amalu, E.H, Ekere, N.N. and Aminu, G. (2011) Effects of inter-metallic compound on high temperature reliability of flip chip interconnects for fine pitch applications. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 208-213. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145173)

solder joint integrity

Amalu, Emeka H., Lui, Y.T., Ekere, Ndy, Bhatti, R.S. and Takyi, G. (2011) Investigation of the effects of reflow profile parameters on lead-free solder bump volumes and joint integrity. In: AIP Conference Proceedings. American Institute of Physics, Melville, NY, USA, pp. 639-644. (doi:10.1063/1.3552519)

solder joint reliability

Amalu, E.H., Ekere, N.N., Bhatti, R.S., Mallik, S., Takyi, G. and Ibhadode, A.O.A. (2011) Numerical investigation of thermo-mechanical behaviour of ball grid array solder joint at high temperature excursion. Advanced Materials Research, 367. pp. 287-292. ISSN 1662-8985 (Print), 1022-6680 (Online) (doi:10.4028/www.scientific.net/AMR.367.287)

solder joints

Durairaj, Rajkumar, Mallik, Sabuj, Seman, Anton, Marks, Antony and Ekere, Ndy (2008) Investigation of wall-slip effect on paste release characteristic in flip-chip stencil printing process. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1328-1333. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763615)

Salam, B. and Ekere, Ndy (2006) A study of inter-metallic compounds (IMC) formation and growth in ultra-fine pitch Sn-Ag-Cu lead-free solder joints. ESTC 2006: 1st Electronics Systemintegration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, pp. 988-994. ISBN 1424405521 (doi:10.1109/ESTC.2006.280131)

solder paste

Durairaj, R., Mallik, S., Seman, A. and Ekere, N.N. (2009) Investigation of wall-slip behaviour in lead-free solder pastes and isotropic conductive adhesives. Sadhana - Academy Proceedings in Engineering Sciences, 34 (5). pp. 799-810. ISSN 0256-2499 (Print), 0973-7677 (Online) (doi:10.1007/s12046-009-0046-5)

Durairaj, R., Mallik, S., Seman, A., Marks, A. and Ekere, N.N. (2009) Rheological characterisation of solder pastes and isotropic conductive adhesives used for flip-chip assembly. Journal of Materials Processing Technology, 209 (8). pp. 3923-3930. ISSN 0924-0136 (doi:10.1016/j.jmatprotec.2008.09.013)

Durairaj, R., Man, Lam Wai, Ekere, N.N. and Mallik, S. (2010) The effect of wall-slip formation on the rheological behaviour of lead-free solder pastes. Materials and Design, 31 (3). pp. 1056-1062. ISSN 0261-3069 (doi:10.1016/j.matdes.2009.09.051)

Durairaj, Rajkumar, Ekere, Ndy, Salam, B., Jackson, G. and He, Da (2003) Monte Carlo study of solder paste microstructure and ultra-fine-pitch stencil printing. Journal of Materials Science: Materials in Electronics, 14 (8). pp. 501-506. ISSN 0957-4522 (doi:10.1023/A:1023929119055)

Durairaj, Rajkumar, Mallik, Sabuj and Ekere, Ndy (2008) Solder paste characterisation: towards the development of quality control (QC) tool. Soldering & Surface Mount Technology, 20 (3). pp. 34-40. ISSN 0954-0911 (doi:10.1108/09540910810885705)

Mallik, S., Schmidt, M., Bauer, R. and Ekere, N.N. (2010) Evaluating solder paste behaviours through rheological test methods and their correlation to the printing performance. Soldering & Surface Mount Technology, 22 (4). pp. 42-49. ISSN 0954-0911 (doi:10.1108/09540911011076871)

Mallik, Sabuj (2010) Rheological characterisation and modelling of electronic materials: time-dependent behaviours of lead-free solder pastes and flux mediums. LAP Lambert Academic Publishing GmbH & Co. KG, Saarbrücken, Germany. ISBN 978-3-8433-7771-3

Mallik, Sabuj, Ekere, Ndy, Durairaj, Rajkumar and Marks, Antony (2008) An investigation into the rheological properties of different lead-free solder pastes for surface mount applications. Soldering & Surface Mount Technology, 20 (2). pp. 3-10. ISSN 0954-0911 (doi:1108/09540910810871511)

Mallik, Sabuj, Ekere, Ndy, Seman, Anton and Durairaj, Rajkumar (2009) Modelling the time-dependent behaviour of solder pastes used in the electronics assembly applications. In: 11th Electronic Material and Packaging Conference (EMAP 2009), 1-2 Dec 2009, Penang, Malaysia. (Unpublished)

solder pastes

Durairaj, R., Mallik, S., Seman, A., Marks, A. and Ekere, N.N. (2008) Viscoelastic properties of solder paste and isotropic conductive adhesives used for flip-chip assembly. In: Electronic Manufacturing Technology Symposium (IEMT), 2008 33rd IEEE/CPMT International. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 1-8. ISBN 9781424433926 (print), 9781424433933 (electronic) ISSN 1089-8190 (doi:10.1109/IEMT.2008.5507801)

Durairaj, R., Man, Lam Wai, Ramesh, S., Wea, Lim Chia, Leng, Eu Poh, Ekere, N.N., Mallik, S. and Seman, A. (2009) Investigation of wall-slip effect on lead-free solder paste and isotropic conductive adhesives. In: Electronics Packaging Technology Conference, 2009. EPTC '09. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 422-426. ISBN 978-1-4244-5099-2 (print), 978-1-4244-5100-5 (e-ISBN) (doi:10.1109/EPTC.2009.5416511)

Durairaj, Rajkumar (2006) Rheological characterisation of solder pastes and isotropic conductive adhesives (ICAs) for microsystems assembly technology. PhD thesis, University of Greenwich.

Durairaj, Rajkumar, Mallik, Sabuj, Seman, Anton, Marks, Antony and Ekere, Ndy (2008) Investigation of wall-slip effect on paste release characteristic in flip-chip stencil printing process. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1328-1333. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763615)

Durairaj, Rajkumar, Man, Lam Wai, Mallik, Sabuj and Ekere, Ndy (2009) Thixotropic studies of lead-based solder, lead-free solder and conductive adhesive pastes. In: 11th Electronic Material and Packaging Conference (EMAP), 1-3 Dec 2009, Penang, Malaysia. (Unpublished)

Ekere, Ndy, Durairaj, Rajkumar, Mallik, Sabuj, Marks, Antony, Bauer, R. and Winter, M. (2006) Rheological characterisation of new lead-free solder paste formulations for flip-chip assembly. ESTC 2006: 1st Electronics Systemintegration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, pp. 995-1000. ISBN 1424405521 (doi:10.1109/ESTC.2006.280132)

Mallik, S., Ekere, N.N., Durairaj, R., Marks, A.E. and Seman, A. (2009) Wall-slip effects in SnAgCu solder pastes used in electronics assembly applications. Materials & Design, 30 (10). pp. 4502-4506. ISSN 0261-3069 (doi:10.1016/j.matdes.2009.05.028)

Mallik, Sabuj (2009) Study of the time-dependent rheological behaviour of lead-free solder pastes and flux mediums used for flip-chip assembly applications. PhD thesis, University of Greenwich.

Mallik, Sabuj, Ekere, Ndy, Marks, Antony, Seman, Anton and Durairaj, Rajkumar (2008) Modelling of the time-dependent flow behaviour of lead-free solder pastes used for flip-chip assembly applications. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 1219-1224. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684527)

Mallik, Sabuj, Schmidt, M., Bauer, R. and Ekere, Ndy (2008) Influence of solder paste components on rheological behaviour. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, USA, pp. 1135-1140. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684512)

Mallik, Sabuj, Thieme, Jens, Bauer, R., Ekere, Ndy, Seman, Anton, Bhatti, Rajinderpal and Durairaj, Rajkumar (2010) Study of the rheological behaviour of Sn-Ag-Cu solder pastes and their correlation with printing performance. In: EPTC 2009 Proceedings of 2009 11th Electronics Packaging Technology Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 869-874. ISBN 978-1-4244-5099-2 (Print), 978-1-4244-5100-5 (e-ISBN) (doi:10.1109/EPTC.2009.5416423)

Marks, A.E., Mallik, S., Ekere, N.N. and Seman, A. (2008) Effect of temperature on slumping behaviour of lead-free solder paste and its rheological simulation. 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 829-832. ISBN 97814244-28137 (Print), 978-1-4244-2814-4 (Electronic) (doi:10.1109/ESTC.2008.4684459)

solder thermal interface materials (STIMs)

Otiaba, K.C., Bhatti, R.S., Ekere, N.N., Mallik, S., Amalu, E.H. and Ekpu, M. (2011) Thermal effects of die-attach voids location and style on performance of chip level package. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 231-236. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145176)

soldering

Amalu, Emeka Hyginus (2012) Modelling of the reliability of flip chip lead-free solder joints at high-temperature excursions. PhD thesis, University of Greenwich.

solders

Ekpu, Mathias, Bhatti, Raj, Okereke, Michael I., Mallik, Sabuj and Otiaba, Kenny (2013) Fatigue life of lead-free solder thermal interface materials at varying bond line thickness in microelectronics. Microelectronics Reliability, 54 (1). 239 - 244. ISSN 0026-2714 (doi:10.1016/j.microrel.2013.08.006)

solid particle erosion

Deng, T., Bingley, M.S., Bradley, M.S.A. and De Silva, S.R. (2008) A comparison of the gas-blast and centrifugal-accelerator erosion testers: The influence of particle dynamics. Wear, 265 (7-8). pp. 945-955. ISSN 0043-1648 (doi:10.1016/j.wear.2008.02.017)

Li, Ji (2007) A study of the solid particle erosion performance of automative and other novel low carbon steels. PhD thesis, University of Greenwich.

solid particle impact

Burnett, Anthony John (1996) The use of laboratory erosion tests for the prediction of wear in pneumatic conveyor bends. PhD thesis, University of Greenwich.

spatial distribution uncertainties

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2012) Electric vehicles' impact on British distribution networks. IET Electrical Systems in Transportation, 2 (3). pp. 91-102. ISSN 2042-9738 (doi:10.1049/iet-est.2011.0023)

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2011) Predicting Electric Vehicle impacts on residential distribution networks with distributed generation. In: 2010 IEEE Vehicle Power and Propulsion Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-8220-7 (doi:10.1109/VPPC.2010.5729009)

SPE

Li, Ji (2007) A study of the solid particle erosion performance of automative and other novel low carbon steels. PhD thesis, University of Greenwich.

stabilisation

Sangelaji, Z. and Banks, S.P. (2009) Radial control design for a class of nonlinear systems. Control and Intelligent Systems, 37 (3). pp. 144-151. ISSN 1480-1752 (Print), 1925-5810 (Online) (doi:10.2316/Journal.201.2009.3.201-2018)

Sangelaji, Z. and Banks, S.P. (2009) Stabilisation of nonlinear systems using weighted angular method. IET Control Theory & Applications, 3 (4). pp. 445-451. ISSN 1751-8644 (Print), 1751-8652 (Online) (doi:10.1049/iet-cta.2007.0318)

Sangelaji, Zahra (2012) Stabilisation of Multi-Input Nonlinear Systems Using Associated Angular Approach. In: Control (CONTROL), 2012 UKACC International Conference on. IEEE, pp. 485-489. ISBN 9781467315593 (doi:10.1109/CONTROL.2012.6334678)

Sangelaji, Zahra and Banks, Steve (2008) Dynamical Radial Control of Nonlinear Systems. In: Proceedings of the UKACC International Conference on Control 2008. UKACC, pp. 1-5. ISBN 9780955615214

stabilization

Sangelaji, Z. and Banks, S.P. (2008) Control design and stabilization analysis of non-linear systems using angular representations. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 222 (6). pp. 457-463. ISSN 0959-6518 (Print), 2041-3041 (Online) (doi:10.1243/09596518JSCE502)

stacked microstrip antennas

Callaghan, Peter and Batchelor, John C. (2008) Multiband low-profile antenna for remote antenna unit picocell applications. IEEE Transactions on Antennas and Propagation, 56 (8). pp. 2475-2480. ISSN 0018-926X (doi:10.1109/TAP.2008.927558)

stem cells

Yaul, M., Culme-Seymour, E., Ruban, L., Veratich, F. S. and Bhatti, R. (2008) Firepolished glass microtools for human embryonic stem cell (HESC) cultivation. In: 7th Annual UKSB Conference and Postgraduate Day, 26-28 June 2008, University of Liverpool, UK. (Unpublished)

stencil printing

Durairaj, R., Ramesh, S., Mallik, S., Seman, A. and Ekere, N. (2009) Rheological characterisation and printing performance of Sn/Ag/Cu solder pastes. Materials and Design, 30 (9). pp. 3812-3818. ISSN 0261-3069 (doi:10.1016/j.matdes.2009.01.028)

Mallik, S., Schmidt, M., Bauer, R. and Ekere, N.N. (2010) Evaluating solder paste behaviours through rheological test methods and their correlation to the printing performance. Soldering & Surface Mount Technology, 22 (4). pp. 42-49. ISSN 0954-0911 (doi:10.1108/09540911011076871)

stencil printing process

Durairaj, R., Mallik, S., Seman, A. and Ekere, N.N. (2009) Investigation of wall-slip behaviour in lead-free solder pastes and isotropic conductive adhesives. Sadhana - Academy Proceedings in Engineering Sciences, 34 (5). pp. 799-810. ISSN 0256-2499 (Print), 0973-7677 (Online) (doi:10.1007/s12046-009-0046-5)

Durairaj, R., Man, Lam Wai, Ekere, N.N. and Mallik, S. (2010) The effect of wall-slip formation on the rheological behaviour of lead-free solder pastes. Materials and Design, 31 (3). pp. 1056-1062. ISSN 0261-3069 (doi:10.1016/j.matdes.2009.09.051)

STEP

Aziz, Hayder, Li, Zhengxi and Gao, James (2008) Engineering design knowledge management in de-centralised virtual enterprises. Computer Aided Design and Applications, 5 (6). pp. 787-800. ISSN 1686-4360 (doi:10.3722/cadaps.2008.787-800)

STL

Sahatoo, Divesh, Chowdary, Boppana V., Ali, Fahraz F. and Bhatti, Rajinderpal (2008) Slicing issues in CAD translation to STL in rapid prototyping. Proceedings of The 2008 IAJC-IJME International Conference. International Association of Journals and Conferences/International Journal of Modern Engineering, California State University, Northridge. ISBN 9781606433799

STL file generation

Chowdary, Boppana V., Sahatoo, Divesh R. and Bhatti, Raj (2007) Some STL file generation issues in rapid prototyping. In: Esparragoza, Ivan E., Bermudez, Manuel and Petrie, Maria Larrondo, (eds.) 5th Latin American and Caribbean Conference for Engineering and Technology Developing Entrepreneural Engineers for the Sustainable Growth of Latin American and Caribbean: Education, Innovation, Technology, and Practice. Latin American and Caribbean Consortium of Engineering Institutions, Florida. ISBN 098228960X

stochastic modelling

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Awad, B., Cipcigan, L.M. and Jenkins, N. (2010) Impact of residential charging of electric vehicles on distribution networks, a probabilistic approach. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

stochastic simulation

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2012) Electric vehicles' impact on British distribution networks. IET Electrical Systems in Transportation, 2 (3). pp. 91-102. ISSN 2042-9738 (doi:10.1049/iet-est.2011.0023)

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2011) Predicting Electric Vehicle impacts on residential distribution networks with distributed generation. In: 2010 IEEE Vehicle Power and Propulsion Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-8220-7 (doi:10.1109/VPPC.2010.5729009)

strain-rate dependence

Okereke, M.I., Buckley, C.P. and Siviour, C.R. (2012) Compression of polypropylene across a wide range of strain rates. Mechanics of Time-Dependent Materials, 16 (4). pp. 361-379. ISSN 1385-2000 (Print), 1573-2738 (Online) (doi:10.1007/s11043-012-9167-z)

strategy integration

Bhatti, Rajinderpal and Berkhauer-Smith, Samantha (2007) Integrating both technical and cultural aspects of process improvement. In: 5th International Conference on Manufacturing Research (ICMR 2007), 11- 13 September 2007, De Montfort University Leicester. (Unpublished)

stress

Mallik, Sabuj, Schmidt, M., Bauer, R. and Ekere, Ndy (2008) Influence of solder paste components on rheological behaviour. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, USA, pp. 1135-1140. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684512)

Marks, A.E., Mallik, S., Ekere, N.N. and Seman, A. (2008) Effect of temperature on slumping behaviour of lead-free solder paste and its rheological simulation. 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 829-832. ISBN 97814244-28137 (Print), 978-1-4244-2814-4 (Electronic) (doi:10.1109/ESTC.2008.4684459)

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) Development of an in-situ, non-destructive ultrasonic monitoring technique for solder pastes. 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 209-214. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684351)

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) In-situ non-destructive ultrasonic rheology technique for monitoring different lead-free solder pastes for surface mount applications. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1448-1454. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763635)

stretched exponential model

Mallik, Sabuj, Ekere, Ndy, Seman, Anton and Durairaj, Rajkumar (2009) Modelling the time-dependent behaviour of solder pastes used in the electronics assembly applications. In: 11th Electronic Material and Packaging Conference (EMAP 2009), 1-2 Dec 2009, Penang, Malaysia. (Unpublished)

Structure-specified controller

Bui, Trung Thanh, Parnichkun, M and Le, Chi (2010) Structure-specified H loop shaping control for balancing of bicycle robots: A particle swarm optimization approach. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 224 (7). pp. 857-867. ISSN 0959-6518 (Print), 2041-3041 (Online) (doi:10.1243/09596518JSCE950)

substations

Grau, I., Skarvelis-Kazakos, S., Papadopoulos, P., Cipcigan, L.M. and Jenkins, N. (2010) Electric vehicles support for intentional islanding: A prediction for 2030. In: 41st North American Power Symposium. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 1-5. ISBN 978-1-4244-4428-1 (Print), 978-1-4244-4429-8 (Online) (doi:10.1109/NAPS.2009.5484016)

supply chain

Berkhauer-Smith, Samantha (2009) The integration of lean thinking and manufacturing business improvement methods within the aerospace supply chain. PhD thesis, University of Greenwich.

supply chain management (SCM)

Hasan, Syed M. (2013) A collaborative framework for feasibility analysis in automotive product development with global supply chain. PhD thesis, University of Greenwich.

surface mount components

Amalu, E.H., Ekere, N.N., Bhatti, R.S., Mallik, S., Takyi, G. and Ibhadode, A.O.A. (2011) Numerical investigation of thermo-mechanical behaviour of ball grid array solder joint at high temperature excursion. Advanced Materials Research, 367. pp. 287-292. ISSN 1662-8985 (Print), 1022-6680 (Online) (doi:10.4028/www.scientific.net/AMR.367.287)

Surgical tools

Le, C.H., Okereke, M.I., Nguyen, V.H., Dao, V.D., Soe, S., Zlatov, N. and Le, T.H. (2011) Personalised medical product development: Methods, challenges and opportunities. Romanian Review Precision Mechanics, Optics and Mechatronics, 40. pp. 11-20. ISSN 1584-5982

sustainability in manufacturing

Piorkowski, Barry, Gao, James and Evans, Richard (2011) A case-study: finding references to product development knowledge from analysis of face-to-face meetings. In: Glocalized Solutions for Sustainability in Manufacturing Proceedings of the 18th CIRP International Conference on Life Cycle Engineering. Springer, New York, USA, pp. 564-569. ISBN 978-3642196911 (doi:10.1007/978-3-642-19692-8-98)

sustainable energy

Owonikoko, Aminu (2012) Predicting storage vessel geometry requirements for discharge of extreme shape materials. MPhil thesis, University of Greenwich.

technical product-service systems

Doultsinou, Athanasia, Roy, Rajkumar, Baxter, David and Gao, James (2008) Key service issues in two UK manufacturing companies from a PSS perspective. Proceedings of the Cranfield Multi-Strand Conference: Creating Wealth Through Research and Innovation (CMC 2008): 6-7 May 2008. Cranfield University Press, Cranfield University, pp. 287-292. ISBN 9780955743672

Gao, James, Baxter, David, Doultsinou, Nancy and Roy, Rajkumar (2007) Identification of service knowledge types for technical product-service systems. Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath, pp. 549-555.

technical services

Doultsinou, Athanasia, Roy, Rajkumar, Baxter, David, Gao, James and Mann, Andy (2009) Developing a service knowledge reuse framework for engineering design. Journal of Engineering Design, 20 (4). pp. 389-411. ISSN 0954-4828 (Print), 1466-1837 (Online) (doi:10.1080/09544820903149354)

technology

Hasan, Syed M. (2013) A collaborative framework for feasibility analysis in automotive product development with global supply chain. PhD thesis, University of Greenwich.

thermal

Otiaba, K.C., Ekere, N.N., Bhatti, R.S., Mallik, S., Alam, M.O. and Amalu, E.H. (2011) Thermal interface materials for automotive electronic control unit: Trends, technology and R&D challenges. Microelectronics Reliability, 51 (12). pp. 2031-2043. ISSN 0026-2714 (doi:10.1016/j.microrel.2011.05.001)

thermal conductivity

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy and Mallik, Sabuj (2011) Advanced thermal management materials for heat sinks used in microelectronics. In: EMPC-2011: 18th European Microelectronics and Packaging Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-8. ISBN 9781467306942

thermal constriction

Ekpu, Mathias, Bhatti, Raj, Okereke, M.I., Mallik, Sabuj and Otiaba, Kenny (2013) The effect of thermal constriction on heat management in a microelectronic application. Microelectronics Journal, 45 (2). 159 - 166. ISSN 0026-2692 (doi:10.1016/j.mejo.2013.10.011)

thermal cycling

Amalu, E.H., Ekere, N.N., Bhatti, R.S., Mallik, S., Takyi, G. and Ibhadode, A.O.A. (2011) Numerical investigation of thermo-mechanical behaviour of ball grid array solder joint at high temperature excursion. Advanced Materials Research, 367. pp. 287-292. ISSN 1662-8985 (Print), 1022-6680 (Online) (doi:10.4028/www.scientific.net/AMR.367.287)

thermal efficiency

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy, Mallik, Sabuj, Amalu, Emeka and Otiaba, Kenny (2011) Investigation of effects of heat sinks on thermal performance of microelectronic package. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 127-132. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145164)

thermal interface materials

Ekpu, Mathias, Bhatti, Raj, Okereke, Michael I., Mallik, Sabuj and Otiaba, Kenny (2013) Fatigue life of lead-free solder thermal interface materials at varying bond line thickness in microelectronics. Microelectronics Reliability, 54 (1). 239 - 244. ISSN 0026-2714 (doi:10.1016/j.microrel.2013.08.006)

thermal management

Otiaba, K.C., Ekere, N.N., Amalu, E.H., Bhatti, R.S. and Mallik, S. (2012) Thermal management materials for electronic control unit: trends, processing technology and R and D challenges. Advanced Materials Research, 367. pp. 301-307. ISSN 1022-6680 (Print), 1662-8985 (Online) (doi:10.4028/www.scientific.net/AMR.367.301)

Otiaba, K.C., Ekere, N.N., Amalu, E.H., Bhatti, R.S. and Mallik, S. (2010) Thermal management materials for electronic control unit: trends, processing technology and R&D challenges. In: International Conference on Engineering Research & Development: Advances in Engineering Science & Technology, 7-9 September 2010, Benin City, Africa.

thermal management materials

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy and Mallik, Sabuj (2011) Advanced thermal management materials for heat sinks used in microelectronics. In: EMPC-2011: 18th European Microelectronics and Packaging Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-8. ISBN 9781467306942

thermal overloads

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Awad, B., Cipcigan, L.M. and Jenkins, N. (2010) Impact of residential charging of electric vehicles on distribution networks, a probabilistic approach. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2012) Electric vehicles' impact on British distribution networks. IET Electrical Systems in Transportation, 2 (3). pp. 91-102. ISSN 2042-9738 (doi:10.1049/iet-est.2011.0023)

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2011) Predicting Electric Vehicle impacts on residential distribution networks with distributed generation. In: 2010 IEEE Vehicle Power and Propulsion Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-8220-7 (doi:10.1109/VPPC.2010.5729009)

thixotropy

Durairaj, Rajkumar, Man, Lam Wai, Mallik, Sabuj and Ekere, Ndy (2009) Thixotropic studies of lead-based solder, lead-free solder and conductive adhesive pastes. In: 11th Electronic Material and Packaging Conference (EMAP), 1-3 Dec 2009, Penang, Malaysia. (Unpublished)

Mallik, Sabuj (2010) Rheological characterisation and modelling of electronic materials: time-dependent behaviours of lead-free solder pastes and flux mediums. LAP Lambert Academic Publishing GmbH & Co. KG, Saarbrücken, Germany. ISBN 978-3-8433-7771-3

Mallik, Sabuj, Ekere, Ndy, Seman, Anton and Durairaj, Rajkumar (2009) Modelling the time-dependent behaviour of solder pastes used in the electronics assembly applications. In: 11th Electronic Material and Packaging Conference (EMAP 2009), 1-2 Dec 2009, Penang, Malaysia. (Unpublished)

three dimensional representative volume elements

Okereke, M. I. and Akpoyomare, A. I. (2013) A virtual framework for prediction of full-field elastic response of unidirectional composites. Computational Materials Science, 70. pp. 82-99. ISSN 0927-0256 (Online) (doi:10.1016/j.commatsci.2012.12.036)

Three-body abrasion

Bradley, Michael, Bingley, Mark and Mengistu, Samuel (2004) Frictional characteristics of steel plates during abrasive particle flow: A comparison of in situ measurements made on a linear abrasive wear tester with those on a Jenike shear tester Jenike shear tester. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 218 (4). pp. 221-235. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/0954408042466963)

three-dimensional finite element analysis

Otiaba, K.C., Bhatti, R.S., Ekere, N.N., Mallik, S., Amalu, E.H. and Ekpu, M. (2011) Thermal effects of die-attach voids location and style on performance of chip level package. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 231-236. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145176)

Throughput

Arshad, Kamran (2015) LTE system level performance in the presence of CQI feedback uplink delay and mobility. In: International Conference on Communications, Signal Processing, and their Applications (ICCSPA), 2015. IEEE, pp. 1-5. ISBN 978-1-4799-6532-8 (doi:10.1109/ICCSPA.2015.7081294)

tolerance

Chowdary, Boppana V., Sahatoo, Divesh R. and Bhatti, Raj (2007) Some STL file generation issues in rapid prototyping. In: Esparragoza, Ivan E., Bermudez, Manuel and Petrie, Maria Larrondo, (eds.) 5th Latin American and Caribbean Conference for Engineering and Technology Developing Entrepreneural Engineers for the Sustainable Growth of Latin American and Caribbean: Education, Innovation, Technology, and Practice. Latin American and Caribbean Consortium of Engineering Institutions, Florida. ISBN 098228960X

tolerance analysis

Eadie, R. and Gao, James (2008) An industrial implementation of a methodology for the optimisation of product design tolerances. In: Kai, Cheng, Makatsoris, Harris C. and Harrison, David, (eds.) Advances in manufacturing technology XXII: the proceedings of the 6th International Conference on Manufacturing Research ICMR08, 9th-11th September 2008, London UK. Brunel University College, Brunel University, pp. 161-170. ISBN 9781902316604

training

Chi, Xuesong (2008) A web-based intelligent learning environment for the teaching of industrial continuous quality improvement. PhD thesis, University of Greenwich.

transportation

Grau, I., Skarvelis-Kazakos, S., Papadopoulos, P., Cipcigan, L.M. and Jenkins, N. (2010) Electric vehicles support for intentional islanding: A prediction for 2030. In: 41st North American Power Symposium. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 1-5. ISBN 978-1-4244-4428-1 (Print), 978-1-4244-4429-8 (Online) (doi:10.1109/NAPS.2009.5484016)

tribology

Burnett, Anthony John (1996) The use of laboratory erosion tests for the prediction of wear in pneumatic conveyor bends. PhD thesis, University of Greenwich.

TRIZ

Gao, James, Fei, Genyuan and Tang, X.Q. (2009) A TRIZ based methodology for the analysis of the coupling problems in complex engineering design. In: Proceedings of the 19th CIRP Design Conference – Competitive Design. Cranfield University Press, Cranfield University, pp. 285-292. ISBN 9780955743641

tubing

Kessel, Stephen Ronald (1985) The interaction between rotary valves and pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

two phase flow

Burnett, Anthony John (1996) The use of laboratory erosion tests for the prediction of wear in pneumatic conveyor bends. PhD thesis, University of Greenwich.

ubiquitous networks

Adekunle, A.A. and Woodhead, S.R. (2010) Zone based systems design framework for the realisation of efficient block cipher based message authentication code algorithms. In: ARES 2010 Fifth International Conference on Availability, Reliability, and Security15-18 February 2010 Krakow, Poland. Conference Publishing Services, IEEE Computer Society, Los Alamitos, California, pp. 216-221. ISBN 9781424458790 (doi:10.1109/ARES.2010.109)

UK generic distribution network

Skarvelis-Kazakos, Spyros, Papadopoulos, Panagiotis, Grau, Iñaki, Gerber, Annelies, Cipcigan, Liana M., Jenkins, Nick and Carradore, Loredana (2010) Carbon optimized virtual power plant with electric vehicles. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

ultra-fine pitch assembly

Ekere, N and Mallik, Sabuj (2008) A methodology for characterising new lead-free solder paste formulations used for flip-chip assembly applications. In: Kobayashi, Akira, (ed.) Smart processing technology: SPT '07. High Temperature Society of Japan, Ibaraki, Japan, pp. 59-64.

Uplink

Arshad, Kamran (2015) LTE system level performance in the presence of CQI feedback uplink delay and mobility. In: International Conference on Communications, Signal Processing, and their Applications (ICCSPA), 2015. IEEE, pp. 1-5. ISBN 978-1-4799-6532-8 (doi:10.1109/ICCSPA.2015.7081294)

validation and verification

Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2009) Manufacturing knowledge verification in design support systems. International Journal of Production Research, 47 (12). pp. 3179-3204. ISSN 0020-7543 (Print), 1366–588X (Online) (doi:10.1080/00207540701802452)

valves

Kessel, Stephen Ronald (1985) The interaction between rotary valves and pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

vehicle market sales

Karfopoulos, Evangelos L., Papadopoulos, Panagiotis, Skarvelis-Kazakos, Spyros, Grau, Inaki, Cipcigan, Liana M., Hatziargyriou, Nikos and Jenkins, Nick (2011) Introducing electric vehicles in the microgrids concept. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082212)

vibration

Gandhi Jeyaraj, S. and Habtay, Yehdego (2011) Effective and efficient circuit breaker analysis. IET 2011 Conference on Reliability of Transmission and Distribution Networks (RTDN 2011). pp. 1-6. (doi:10.1049/cp.2011.0532)

video

Piorkowski, B.A., Evans, R.D. and Gao, J.X. (2011) Development of a face-to-face meeting capture and indexing process. In: Proceedings of the 2011 15th International Conference on Computer Supported Cooperative Work in Design, CSCWD2011. IEEE Computer Society, Piscataway, NJ, USA, pp. 4-8. ISBN 9781457703867 (doi:10.1109/CSCWD.2011.5960047)

virtual enterprise

Aziz, Hayder, Li, Zhengxi and Gao, James (2008) Engineering design knowledge management in de-centralised virtual enterprises. Computer Aided Design and Applications, 5 (6). pp. 787-800. ISSN 1686-4360 (doi:10.3722/cadaps.2008.787-800)

virtual learning environments

Chi, Xuesong (2008) A web-based intelligent learning environment for the teaching of industrial continuous quality improvement. PhD thesis, University of Greenwich.

virtual power plant

Raab, A. F., Ferdowsi, M., Karfopoulos, E., Unda, I. Grau, Skarvelis-Kazakos, S., Papadopoulos, P., Abbasi, E., Cipcigan, L.M., Jenkins, N., Hatziargyriou, N. and Strunz, K. (2011) Virtual power plant control concepts with electric vehicles. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082214)

Skarvelis-Kazakos, Spyros, Papadopoulos, Panagiotis, Grau, Iñaki, Gerber, Annelies, Cipcigan, Liana M., Jenkins, Nick and Carradore, Loredana (2010) Carbon optimized virtual power plant with electric vehicles. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

virtual power plant control concepts

Raab, A. F., Ferdowsi, M., Karfopoulos, E., Unda, I. Grau, Skarvelis-Kazakos, S., Papadopoulos, P., Abbasi, E., Cipcigan, L.M., Jenkins, N., Hatziargyriou, N. and Strunz, K. (2011) Virtual power plant control concepts with electric vehicles. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082214)

virtual power plants

Daniel, Simon, Skarvelis-Kazakos, Spryos and Jain, Priyanka (2013) Local smart DC networks and distributed storage for reducing and shifting peak load. In: 22nd International Conference on Electricity Distribution. IET/CIRED, Stockholm, Sweden.

Ferdowsi, Mohsen, Grau Unda, Iñaki, Karfopoulos, Evangelos, Papadopoulos, Panagiotis, Skarvelis-Kazakos, Spyros, Cipcigan, Liana, Raab, Andreas F., Dimeas, Aris, Abbasi, Ehsan and Strunz, Kai (2010) Controls and EV aggregation for virtual power plants. Project Report. MERGE.

Grau, I., Papadopoulos, P., Skarvelis-Kazakos, S., Cipcigan, L.M. and Jenkins, N. (2010) Virtual power plants with electric vehicles. In: 2nd European Conference on SmartGrids and E-Mobility, 20-21 Oct 2010, Brussels, Belgium. (Unpublished)

Moreira, C.L., Rua, David, Karfopoulos, E., Zountouridou, E., Soares, F.J., Bourithi, I., Grau, I., Peças Lopes, J.A., Cipcigan, L.M., Seca, Luis, Moschakis, Marios, Rocha Almeida, P.M., Moutis, P., Papadopoulos, P., Rei, R.J., Bessa, Ricardo J. and Skarvelis-Kazakos, S. (2010) Extend concepts of MG by identifying several EV smart control approaches to be embedded in the Smart Grid concept to manage EV individually or in clusters. Project Report. MERGE.

Skarvelis-Kazakos, Spyros, Rikos, Evangelos, Kolentini, Efstathia, Cipcigan, Liana M. and Jenkins, Nick (2013) Implementing agent-based emissions trading for controlling Virtual Power Plant emissions. Electric Power Systems Research, 102. ISSN 0378-7796 (doi:10.1016/j.epsr.2013.04.004)

virtual testing

Akpoyomare, A. I. and Okereke, M. I. (2013) A virtual test-bed for the prediction of holistic effective elastic properties of UD composites. In: 19th International Conference on Composite Materials (ICCM19), 28 JUL 2013 - 2 AUG 2013, Montreal, Canada.

Akpoyomare, Ambrose I., Okereke, Michael, Bingley, Mark, McIlhagger, A. T. and Archer, E. (2015) Virtual geometric realization of woven textile composites. In: Proceedings of 20th International Conference on Composite Materials. ICCM, Copenhagen, Denmark.

Okereke, M.I., Akpoyomare, A.I. and Bingley, M.S. (2014) Virtual testing of advanced composites, cellular materials and biomaterials: A review. Composites Part B: Engineering, 60. 637 - 662. ISSN 1359-8368 (doi:10.1016/j.compositesb.2014.01.007)

Okereke, Michael and Akpoyomare, Ambrose I. (2015) Virtual Testing Architecture for Prediction of Effective Properties of Particulate Composites. In: International Conference on Advances in Composite Materials and Structures. ICACMS, Istanbul Turkey, p. 4.

virtual testing/framework

Okereke, M. I. and Akpoyomare, A. I. (2013) A virtual framework for prediction of full-field elastic response of unidirectional composites. Computational Materials Science, 70. pp. 82-99. ISSN 0927-0256 (Online) (doi:10.1016/j.commatsci.2012.12.036)

viscoelasticity

Mallik, S., Schmidt, M., Bauer, R. and Ekere, N.N. (2010) Evaluating solder paste behaviours through rheological test methods and their correlation to the printing performance. Soldering & Surface Mount Technology, 22 (4). pp. 42-49. ISSN 0954-0911 (doi:10.1108/09540911011076871)

Viscoplasticity

Amalu, Emeka Hyginus (2012) Modelling of the reliability of flip chip lead-free solder joints at high-temperature excursions. PhD thesis, University of Greenwich.

viscosity

Durairaj, R., Man, Lam Wai, Ekere, N.N. and Mallik, S. (2010) The effect of wall-slip formation on the rheological behaviour of lead-free solder pastes. Materials and Design, 31 (3). pp. 1056-1062. ISSN 0261-3069 (doi:10.1016/j.matdes.2009.09.051)

Durairaj, Rajkumar, Mallik, Sabuj and Ekere, Ndy (2008) Solder paste characterisation: towards the development of quality control (QC) tool. Soldering & Surface Mount Technology, 20 (3). pp. 34-40. ISSN 0954-0911 (doi:10.1108/09540910810885705)

Durairaj, Rajkumar, Mallik, Sabuj, Seman, Anton, Marks, Antony and Ekere, Ndy (2008) Investigation of wall-slip effect on paste release characteristic in flip-chip stencil printing process. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1328-1333. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763615)

Durairaj, Rajkumar, Man, Lam Wai, Mallik, Sabuj and Ekere, Ndy (2009) Thixotropic studies of lead-based solder, lead-free solder and conductive adhesive pastes. In: 11th Electronic Material and Packaging Conference (EMAP), 1-3 Dec 2009, Penang, Malaysia. (Unpublished)

Mallik, S., Schmidt, M., Bauer, R. and Ekere, N.N. (2010) Evaluating solder paste behaviours through rheological test methods and their correlation to the printing performance. Soldering & Surface Mount Technology, 22 (4). pp. 42-49. ISSN 0954-0911 (doi:10.1108/09540911011076871)

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) In-situ non-destructive ultrasonic rheology technique for monitoring different lead-free solder pastes for surface mount applications. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1448-1454. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763635)

voids and thermal resistance

Otiaba, K.C., Bhatti, R.S., Ekere, N.N., Ekpu, M. and Adeyemi, J. (2011) Comparative study of the effects of coalesced and distributed solder die attach voids on thermal resistance of packaged semiconductor device. In: Collection of Papers Presented at the 17th International Workshop on THERMal INvestigation of ICs and Systems (THERMINIC' 2011). EDA Publishing Association, Grenoble, France, pp. 115-119. ISBN 9782355000188

voltage drops

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Awad, B., Cipcigan, L.M. and Jenkins, N. (2010) Impact of residential charging of electric vehicles on distribution networks, a probabilistic approach. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2012) Electric vehicles' impact on British distribution networks. IET Electrical Systems in Transportation, 2 (3). pp. 91-102. ISSN 2042-9738 (doi:10.1049/iet-est.2011.0023)

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2011) Predicting Electric Vehicle impacts on residential distribution networks with distributed generation. In: 2010 IEEE Vehicle Power and Propulsion Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-8220-7 (doi:10.1109/VPPC.2010.5729009)

Volterra analysis

Ali, M. Tanseer, Wu, Ruiheng, Callaghan, Peter and Rapajic, Predrag (2011) Design of a highly linear high frequency amplifier using Volterra model. In: Microwave, Antenna, Propagation, and EMC Technologies for Wireless Communications (MAPE). Microwave, Antenna, Propagation, and EMC Technologies for Wireless Communications (MAPE) . Institute of Electrical and Electronic Engineers, Pistacaway, USA, pp. 355-358. ISBN 978-1-4244-8268-9 (doi:10.1109/MAPE.2011.6156259)

VPP approach

Raab, A. F., Ferdowsi, M., Karfopoulos, E., Unda, I. Grau, Skarvelis-Kazakos, S., Papadopoulos, P., Abbasi, E., Cipcigan, L.M., Jenkins, N., Hatziargyriou, N. and Strunz, K. (2011) Virtual power plant control concepts with electric vehicles. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082214)

Wall-slip

Durairaj, R., Mallik, S., Seman, A. and Ekere, N.N. (2009) Investigation of wall-slip behaviour in lead-free solder pastes and isotropic conductive adhesives. Sadhana - Academy Proceedings in Engineering Sciences, 34 (5). pp. 799-810. ISSN 0256-2499 (Print), 0973-7677 (Online) (doi:10.1007/s12046-009-0046-5)

Durairaj, R., Man, Lam Wai, Ekere, N.N. and Mallik, S. (2010) The effect of wall-slip formation on the rheological behaviour of lead-free solder pastes. Materials and Design, 31 (3). pp. 1056-1062. ISSN 0261-3069 (doi:10.1016/j.matdes.2009.09.051)

Ekere, N and Mallik, Sabuj (2008) A methodology for characterising new lead-free solder paste formulations used for flip-chip assembly applications. In: Kobayashi, Akira, (ed.) Smart processing technology: SPT '07. High Temperature Society of Japan, Ibaraki, Japan, pp. 59-64.

wall-slip behavior

Durairaj, R., Man, Lam Wai, Ramesh, S., Wea, Lim Chia, Leng, Eu Poh, Ekere, N.N., Mallik, S. and Seman, A. (2009) Investigation of wall-slip effect on lead-free solder paste and isotropic conductive adhesives. In: Electronics Packaging Technology Conference, 2009. EPTC '09. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 422-426. ISBN 978-1-4244-5099-2 (print), 978-1-4244-5100-5 (e-ISBN) (doi:10.1109/EPTC.2009.5416511)

wall-slip effects

Mallik, S., Ekere, N.N., Durairaj, R., Marks, A.E. and Seman, A. (2009) Wall-slip effects in SnAgCu solder pastes used in electronics assembly applications. Materials & Design, 30 (10). pp. 4502-4506. ISSN 0261-3069 (doi:10.1016/j.matdes.2009.05.028)

water

Ekere, Ndy, Mallik, Sabuj, Durairaj, Rajkumar and Marks, Antony (2007) A study of the rheological properties of lead free solder paste formulations used for flip-chip interconnection. 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. IEEE/CPM International Electronics Manufacturing Technology Symposium . IEEE, New York, USA, pp. 165-171. ISBN 9781424413355 (doi:10.1109/IEMT.2007.4417065)

water reactor pressure vessels

Moorman, John Everard (2005) A method for the probabilistic method assessment of structures containing defects. PhD thesis, University of Greenwich.

web-page

Piorkowski, B.A., Evans, R.D. and Gao, J.X. (2011) Development of a face-to-face meeting capture and indexing process. In: Proceedings of the 2011 15th International Conference on Computer Supported Cooperative Work in Design, CSCWD2011. IEEE Computer Society, Piscataway, NJ, USA, pp. 4-8. ISBN 9781457703867 (doi:10.1109/CSCWD.2011.5960047)

wind power generation

Grau, I., Skarvelis-Kazakos, S., Papadopoulos, P., Cipcigan, L.M. and Jenkins, N. (2010) Electric vehicles support for intentional islanding: A prediction for 2030. In: 41st North American Power Symposium. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 1-5. ISBN 978-1-4244-4428-1 (Print), 978-1-4244-4429-8 (Online) (doi:10.1109/NAPS.2009.5484016)

wire-ended snubber

Naayagi, R.T., Shuttleworth, R. and Forsyth, A.J. (2011) Investigating the effect of snubber capacitor on high power IGBT turn-off. In: Proceedings of the 2011 1st International Conference on Electrical Energy Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineering, Inc., Piscataway, NJ, USA, pp. 50-55. ISBN 9781612843780 (doi:10.1109/ICEES.2011.5725301)

wireless communication systems

Balasubramanyam, Ramkumar (2008) Adaptive iterative multiuser detection for wireless communication systems. PhD thesis, University of Greenwich.

wireless network

Adekunle, Andrew A. (2012) Design and analysis of light-weight symmetric cryptographic frameworks and constructs for secure packet mode wireless communication. PhD thesis, University of Greenwich.

Woven textile composites

Akpoyomare, Ambrose I., Okereke, Michael, Bingley, Mark, McIlhagger, A. T. and Archer, E. (2015) Virtual geometric realization of woven textile composites. In: Proceedings of 20th International Conference on Composite Materials. ICCM, Copenhagen, Denmark.

yam flour

Shehu, T. and Bhatti, R.S. (2012) The use of Yam flour (starch) as binder for sand mould production in Nigeria. World Applied Sciences Journal, 16 (6). pp. 858-862. ISSN 1818-495 (doi:wasj/wasj16(6)12/14.pdf)

zero voltage switching (ZVS)

Naayagi, R.T., Forsyth, A.J. and Shuttleworth, R. (2011) Performance analysis of DAB DC-DC converter under zero voltage switching. In: Proceedings of the 2011 1st International Conference on Electrical Energy Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineering, Inc., Piscataway, NJ, USA, pp. 56-61. ISBN 9781612843780 (doi:10.1109/ICEES.2011.5725302)

ZVS boundary

Naayagi, R.T., Forsyth, A.J. and Shuttleworth, R. (2011) Performance analysis of DAB DC-DC converter under zero voltage switching. In: Proceedings of the 2011 1st International Conference on Electrical Energy Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineering, Inc., Piscataway, NJ, USA, pp. 56-61. ISBN 9781612843780 (doi:10.1109/ICEES.2011.5725302)

This list was generated on Wed Oct 12 16:18:27 2016 BST.