Skip navigation

Items where Faculty / Department / Research Groups is "School of Engineering > Department of Engineering Systems"

Items where Faculty / Department / Research Groups is "School of Engineering > Department of Engineering Systems"

Up a level
Export as [feed] RSS
Jump to: 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 1996 | 1993 | 1988 | 1985
Number of items at this level: 174.

2016

Balisson, Dushan and Melis, Wim J.C. (2016) Hierarchical neural network model with intrinsic timing. In: International Conference on Applied System Innovation 2016. IEEE. (Submitted)

Seals, Richard (2016) Stimulating the student through experimental activity. In: SHIFT16 : Annual Festival of Learning and Teaching, 8th January 2016, University of Greenwich.

Seals, Richard and Eissa, Hazem (2016) Optimising data extraction from one dimensional distance sensors. In: The First Medway Engineering Conference on Systems: Efficiency, Sustainability and Modelling, 6th June 2016, University of Greenwich. (Submitted)

2015

Akpoyomare, Ambrose I., Okereke, Michael, Bingley, Mark, McIlhagger, A. T. and Archer, E. (2015) Virtual geometric realization of woven textile composites. In: Proceedings of 20th International Conference on Composite Materials. ICCM, Copenhagen, Denmark.

Arshad, Kamran (2015) LTE system level performance in the presence of CQI feedback uplink delay and mobility. In: International Conference on Communications, Signal Processing, and their Applications (ICCSPA), 2015. IEEE, pp. 1-5. ISBN 978-1-4799-6532-8 (doi:10.1109/ICCSPA.2015.7081294)

Arshad, Kamran (2015) LTE system level performance in the presence of CQI feedback uplink delay and mobility. In: International Conference on Communications, Signal Processing, and their Applications (ICCSPA), 2015. IEEE, pp. 1-5. ISBN 978-1-4799-6532-8 (doi:10.1109/ICCSPA.2015.7081294)

Okereke, Michael and Akpoyomare, Ambrose I. (2015) Virtual Testing Architecture for Prediction of Effective Properties of Particulate Composites. In: International Conference on Advances in Composite Materials and Structures. ICACMS, Istanbul Turkey, p. 4.

2014

Ali, M. Tanseer, Wu, Ruiheng, Callaghan, Peter and Rapajic, Predrag (2014) Highly linear RF amplifier design: theoretical analysis and experimental study. International Journal of Electronics, 101 (1). pp. 98-112. ISSN 0020-7217 (Print), 1362-3060 (Online) (doi:10.1080/00207217.2013.769189)

Lakshman, Biju, Deng, Tong, Bradley, Michael S. A., Okereke, Michael and McIlhagger, A. T. (2014) Erosive wear of polymer composite materials and its correlation with high strain rate mechanical properties. In: 2nd International Conference on Abrasive Processes - ICAP 2014 (Programme and Abstract Book). ICAP, Cambridge, United Kingdom, p. 24.

Okereke, M.I., Akpoyomare, A.I. and Bingley, M.S. (2014) Virtual testing of advanced composites, cellular materials and biomaterials: A review. Composites Part B: Engineering, 60. 637 - 662. ISSN 1359-8368 (doi:10.1016/j.compositesb.2014.01.007)

2013

Akpoyomare, A. I. and Okereke, M. I. (2013) A virtual test-bed for the prediction of holistic effective elastic properties of UD composites. In: 19th International Conference on Composite Materials (ICCM19), 28 JUL 2013 - 2 AUG 2013, Montreal, Canada.

Anang, Kwashie Amartei (2013) Minimum cell size for information capacity increase in cellular wireless network. PhD thesis, University of Greenwich.

Bello, Lawal (2013) Power conservation and performance analysis of mobile ad hoc wireless networks. PhD thesis, University of Greenwich.

Daniel, Simon, Skarvelis-Kazakos, Spryos and Jain, Priyanka (2013) Local smart DC networks and distributed storage for reducing and shifting peak load. In: 22nd International Conference on Electricity Distribution. IET/CIRED, Stockholm, Sweden.

Ekpu, Mathias, Bhatti, Raj, Okereke, M.I., Mallik, Sabuj and Otiaba, Kenny (2013) The effect of thermal constriction on heat management in a microelectronic application. Microelectronics Journal, 45 (2). 159 - 166. ISSN 0026-2692 (doi:10.1016/j.mejo.2013.10.011)

Ekpu, Mathias, Bhatti, Raj, Okereke, Michael I., Mallik, Sabuj and Otiaba, Kenny (2013) Fatigue life of lead-free solder thermal interface materials at varying bond line thickness in microelectronics. Microelectronics Reliability, 54 (1). 239 - 244. ISSN 0026-2714 (doi:10.1016/j.microrel.2013.08.006)

Hasan, Syed M. (2013) A collaborative framework for feasibility analysis in automotive product development with global supply chain. PhD thesis, University of Greenwich.

Okereke, M. I. and Akpoyomare, A. I. (2013) A virtual framework for prediction of full-field elastic response of unidirectional composites. Computational Materials Science, 70. pp. 82-99. ISSN 0927-0256 (Online) (doi:10.1016/j.commatsci.2012.12.036)

Skarvelis-Kazakos, Spyros, Rikos, Evangelos, Kolentini, Efstathia, Cipcigan, Liana M. and Jenkins, Nick (2013) Implementing agent-based emissions trading for controlling Virtual Power Plant emissions. Electric Power Systems Research, 102. ISSN 0378-7796 (doi:10.1016/j.epsr.2013.04.004)

Tavakolikhou, Mehdi (2013) A knowledge sharing framework to support rapid prototyping in collaborative automotive supply chain. PhD thesis, University of Greenwich.

Than Soe, Muang (2013) Vibration-based finite element model updating and structural damage identification. PhD thesis, University of Greenwich.

2012

Adekunle, Andrew A. (2012) Design and analysis of light-weight symmetric cryptographic frameworks and constructs for secure packet mode wireless communication. PhD thesis, University of Greenwich.

Amalu, Emeka Hyginus (2012) Modelling of the reliability of flip chip lead-free solder joints at high-temperature excursions. PhD thesis, University of Greenwich.

Angulo Pinzon, Oscar Andres (2012) Modelling of dosator filling and discharge. PhD thesis, University of Greenwich.

Eneh, T., Rapajic, P., Anang, K., Bakalis, P. and Bello, L. (2012) Information capacity of adaptive MIMO OFDM wireless communication systems. In: Adaptive Science and Technology (ICAST). Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 157-164. ISBN 978-1-4673-0758-1 (doi:10.1109/ICASTech.2011.6145168)

Kilic, Gokhan (2012) Application of advanced non-destructive testing methods on bridge health assessment and analysis. PhD thesis, University of Greenwich.

Okereke, M.I., Buckley, C.P. and Siviour, C.R. (2012) Compression of polypropylene across a wide range of strain rates. Mechanics of Time-Dependent Materials, 16 (4). pp. 361-379. ISSN 1385-2000 (Print), 1573-2738 (Online) (doi:10.1007/s11043-012-9167-z)

Otiaba, K.C., Ekere, N.N., Amalu, E.H., Bhatti, R.S. and Mallik, S. (2012) Thermal management materials for electronic control unit: trends, processing technology and R and D challenges. Advanced Materials Research, 367. pp. 301-307. ISSN 1022-6680 (Print), 1662-8985 (Online) (doi:10.4028/www.scientific.net/AMR.367.301)

Owonikoko, Aminu (2012) Predicting storage vessel geometry requirements for discharge of extreme shape materials. MPhil thesis, University of Greenwich.

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2012) Electric vehicles' impact on British distribution networks. IET Electrical Systems in Transportation, 2 (3). pp. 91-102. ISSN 2042-9738 (doi:10.1049/iet-est.2011.0023)

Piorkowski, Barry Andrew, Gao, James Xiaoyu, Evans, Richard David and Martin, Nick (2012) A dynamic knowledge management framework for the high value manufacturing industry. International Journal of Production Research, 51 (7). pp. 2176-2185. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:10.1080/00207543.2012.709650)

Sangelaji, Zahra (2012) Stabilisation of Multi-Input Nonlinear Systems Using Associated Angular Approach. In: Control (CONTROL), 2012 UKACC International Conference on. IEEE, pp. 485-489. ISBN 9781467315593 (doi:10.1109/CONTROL.2012.6334678)

Shehu, T. and Bhatti, R.S. (2012) The use of Yam flour (starch) as binder for sand mould production in Nigeria. World Applied Sciences Journal, 16 (6). pp. 858-862. ISSN 1818-495 (doi:wasj/wasj16(6)12/14.pdf)

Zhu, Haihua, Gao, James, Li, Dongbo and Tang, Dunbing (2012) A Web-based Product Service System for aerospace maintenance, repair and overhaul services. Computers in Industry, 63 (4). pp. 338-348. ISSN 0166-3615 (doi:10.1016/j.compind.2012.02.016)

2011

Ali, M. Tanseer, Wu, Ruiheng, Callaghan, Peter and Rapajic, Predrag (2011) Design of a highly linear high frequency amplifier using Volterra model. In: Microwave, Antenna, Propagation, and EMC Technologies for Wireless Communications (MAPE). Microwave, Antenna, Propagation, and EMC Technologies for Wireless Communications (MAPE) . Institute of Electrical and Electronic Engineers, Pistacaway, USA, pp. 355-358. ISBN 978-1-4244-8268-9 (doi:10.1109/MAPE.2011.6156259)

Amalu, E.H, Ekere, N.N. and Aminu, G. (2011) Effects of inter-metallic compound on high temperature reliability of flip chip interconnects for fine pitch applications. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 208-213. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145173)

Amalu, E.H., Ekere, N.N., Bhatti, R.S., Mallik, S., Takyi, G. and Ibhadode, A.O.A. (2011) Numerical investigation of thermo-mechanical behaviour of ball grid array solder joint at high temperature excursion. Advanced Materials Research, 367. pp. 287-292. ISSN 1662-8985 (Print), 1022-6680 (Online) (doi:10.4028/www.scientific.net/AMR.367.287)

Amalu, Emeka H., Lui, Y.T., Ekere, Ndy, Bhatti, R.S. and Takyi, G. (2011) Investigation of the effects of reflow profile parameters on lead-free solder bump volumes and joint integrity. In: AIP Conference Proceedings. American Institute of Physics, Melville, NY, USA, pp. 639-644. (doi:10.1063/1.3552519)

Callaghan, Peter, Sagor, Md. Hasanuzzaman and Batchelor, John C. (2011) Control of ground plane influence on antenna radiation pattern for mobile handheld devices. In: 2011 Loughborough Antennas and Propagation Conference (LAPC). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-4. ISBN 978-1-4577-1014-8 (doi:10.1109/LAPC.2011.6114127)

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy and Mallik, Sabuj (2011) Advanced thermal management materials for heat sinks used in microelectronics. In: EMPC-2011: 18th European Microelectronics and Packaging Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-8. ISBN 9781467306942

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy, Mallik, Sabuj, Amalu, Emeka and Otiaba, Kenny (2011) Investigation of effects of heat sinks on thermal performance of microelectronic package. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 127-132. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145164)

Ermis, Ertan (2011) Establishment of a repeatable test procedure for measuring adhesion strength of particulates in contact with surfaces. PhD thesis, University of Greenwich.

Fei, Genyuan (2011) A methodology for engineering design change analysis using system modelling and knowledge management technologies. PhD thesis, University of Greenwich.

Gandhi Jeyaraj, S. and Habtay, Yehdego (2011) Effective and efficient circuit breaker analysis. IET 2011 Conference on Reliability of Transmission and Distribution Networks (RTDN 2011). pp. 1-6. (doi:10.1049/cp.2011.0532)

Grau Unda, I., Papadopoulos, P., Skarvelis-Kazakos, S., Cipcigan, L.M. and Jenkins, N. (2011) Energy storage for balancing a local distribution network area. In: Carbone, Rosario, (ed.) Energy Storage in the Emerging Era of Smart Grids. InTech, New York, USA, pp. 301-320. ISBN 978-953-307-269-2 (doi:10.5772/18305)

Jian, Guo (2011) Knowledge search for new product development: a multi-agent based methodology. PhD thesis, University of Greenwich.

Karfopoulos, Evangelos L., Papadopoulos, Panagiotis, Skarvelis-Kazakos, Spyros, Grau, Inaki, Cipcigan, Liana M., Hatziargyriou, Nikos and Jenkins, Nick (2011) Introducing electric vehicles in the microgrids concept. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082212)

Le, C.H., Okereke, M.I., Nguyen, V.H., Dao, V.D., Soe, S., Zlatov, N. and Le, T.H. (2011) Personalised medical product development: Methods, challenges and opportunities. Romanian Review Precision Mechanics, Optics and Mechatronics, 40. pp. 11-20. ISSN 1584-5982

Naayagi, R.T., Forsyth, A.J. and Shuttleworth, R. (2011) Performance analysis of DAB DC-DC converter under zero voltage switching. In: Proceedings of the 2011 1st International Conference on Electrical Energy Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineering, Inc., Piscataway, NJ, USA, pp. 56-61. ISBN 9781612843780 (doi:10.1109/ICEES.2011.5725302)

Naayagi, R.T., Shuttleworth, R. and Forsyth, A.J. (2011) Investigating the effect of snubber capacitor on high power IGBT turn-off. In: Proceedings of the 2011 1st International Conference on Electrical Energy Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineering, Inc., Piscataway, NJ, USA, pp. 50-55. ISBN 9781612843780 (doi:10.1109/ICEES.2011.5725301)

Otiaba, K.C., Bhatti, R.S., Ekere, N.N., Ekpu, M. and Adeyemi, J. (2011) Comparative study of the effects of coalesced and distributed solder die attach voids on thermal resistance of packaged semiconductor device. In: Collection of Papers Presented at the 17th International Workshop on THERMal INvestigation of ICs and Systems (THERMINIC' 2011). EDA Publishing Association, Grenoble, France, pp. 115-119. ISBN 9782355000188

Otiaba, K.C., Bhatti, R.S., Ekere, N.N., Mallik, S., Amalu, E.H. and Ekpu, M. (2011) Thermal effects of die-attach voids location and style on performance of chip level package. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 231-236. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145176)

Otiaba, K.C., Ekere, N.N., Bhatti, R.S., Mallik, S., Alam, M.O. and Amalu, E.H. (2011) Thermal interface materials for automotive electronic control unit: Trends, technology and R&D challenges. Microelectronics Reliability, 51 (12). pp. 2031-2043. ISSN 0026-2714 (doi:10.1016/j.microrel.2011.05.001)

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2011) Predicting Electric Vehicle impacts on residential distribution networks with distributed generation. In: 2010 IEEE Vehicle Power and Propulsion Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-8220-7 (doi:10.1109/VPPC.2010.5729009)

Piorkowski, B.A., Evans, R.D. and Gao, J.X. (2011) Development of a face-to-face meeting capture and indexing process. In: Proceedings of the 2011 15th International Conference on Computer Supported Cooperative Work in Design, CSCWD2011. IEEE Computer Society, Piscataway, NJ, USA, pp. 4-8. ISBN 9781457703867 (doi:10.1109/CSCWD.2011.5960047)

Piorkowski, Barry, Gao, James and Evans, Richard (2011) A case-study: finding references to product development knowledge from analysis of face-to-face meetings. In: Glocalized Solutions for Sustainability in Manufacturing Proceedings of the 18th CIRP International Conference on Life Cycle Engineering. Springer, New York, USA, pp. 564-569. ISBN 978-3642196911 (doi:10.1007/978-3-642-19692-8-98)

Raab, A. F., Ferdowsi, M., Karfopoulos, E., Unda, I. Grau, Skarvelis-Kazakos, S., Papadopoulos, P., Abbasi, E., Cipcigan, L.M., Jenkins, N., Hatziargyriou, N. and Strunz, K. (2011) Virtual power plant control concepts with electric vehicles. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082214)

Soroka, A.J. and Hieu, L.C. (2011) Design challenges for implementing a customer driven mass-customisation system. In: Proceedings - INDIN 2011: 2011 9th IEEE International Conference on Industrial Informatics. Institute of Electrical and Electronics Engineers Inc, Piscataway, USA, pp. 857-862. ISBN 9781457704338 (Online), 9781457704352 (Print) (doi:10.1109/INDIN.2011.6035005)

Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.

Zhang, Pengcheng, Gao, James and Wang, Yinglin (2011) Requirement driven knowledge management system design to support automotive product development. International Journal of Product Lifecycle Management (IJPLM), 5 (2-4). pp. 202-223. ISSN 1743-5110 (doi:10.1504/IJPLM.2011.043188)

2010

Adekunle, A.A. and Woodhead, S.R. (2010) Zone based systems design framework for the realisation of efficient block cipher based message authentication code algorithms. In: ARES 2010 Fifth International Conference on Availability, Reliability, and Security15-18 February 2010 Krakow, Poland. Conference Publishing Services, IEEE Computer Society, Los Alamitos, California, pp. 216-221. ISBN 9781424458790 (doi:10.1109/ARES.2010.109)

Arshad, Kamran (2010) Radio wave propagation modelling using finite element method: Novel approaches to model radio wave propagation and solve complex models efficiently using finite element analysis. LAP Lambert Academic Publishing. ISBN 9783843358019

Baxter, David, Doultsinou, Athanasia, Roy, Rajkumar and Gao, James (2010) A life cycle model for product-service systems design. In: 5th International Conference on Digital Enterprise Technology. Publibook, Paris, France, pp. 441-456.

Bernasko, P.K., Mallik, S., Ekere, N.N., Seman, A. and Tayki, G. (2010) Effect of reflow profile and thermal cycle ageing on the intermetallic formation and growth in lead-free soldering. In: Electronics Packaging Technology. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 986-990. ISBN 978-1-4244-5100-5 (electronic), 978-1-4244-5099-2 (print) (doi:10.1109/EPTC.2009.5416398)

Bui, Trung Thanh, Parnichkun, M and Le, Chi (2010) Structure-specified H loop shaping control for balancing of bicycle robots: A particle swarm optimization approach. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 224 (7). pp. 857-867. ISSN 0959-6518 (Print), 2041-3041 (Online) (doi:10.1243/09596518JSCE950)

Durairaj, R., Man, Lam Wai, Ekere, N.N. and Mallik, S. (2010) The effect of wall-slip formation on the rheological behaviour of lead-free solder pastes. Materials and Design, 31 (3). pp. 1056-1062. ISSN 0261-3069 (doi:10.1016/j.matdes.2009.09.051)

Ferdowsi, Mohsen, Grau Unda, Iñaki, Karfopoulos, Evangelos, Papadopoulos, Panagiotis, Skarvelis-Kazakos, Spyros, Cipcigan, Liana, Raab, Andreas F., Dimeas, Aris, Abbasi, Ehsan and Strunz, Kai (2010) Controls and EV aggregation for virtual power plants. Project Report. MERGE.

Grau, I., Papadopoulos, P., Skarvelis-Kazakos, S., Cipcigan, L.M. and Jenkins, N. (2010) Virtual power plants with electric vehicles. In: 2nd European Conference on SmartGrids and E-Mobility, 20-21 Oct 2010, Brussels, Belgium. (Unpublished)

Grau, I., Skarvelis-Kazakos, S., Papadopoulos, P., Cipcigan, L.M. and Jenkins, N. (2010) Electric vehicles support for intentional islanding: A prediction for 2030. In: 41st North American Power Symposium. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 1-5. ISBN 978-1-4244-4428-1 (Print), 978-1-4244-4429-8 (Online) (doi:10.1109/NAPS.2009.5484016)

Jian, Guo, Gao, James and Wang, Yinglin (2010) A multi-agent based knowledge search framework to support the product development process. International Journal of Computer Integrated Manufacturing, 23 (3). pp. 237-247. ISSN 0951-192X (doi:10.1080/09511920903529222)

Mallik, S., Ekere, N.N., Marks, A.E., Seman, A. and Durairaj, R. (2010) Modeling the structural breakdown of solder paste using the structural kinetic model. Journal of Materials Engineering and Performance, 19 (1). pp. 40-45. ISSN 1059-9495 (Print), 1544-1024 (Online) (doi:10.1007/s11665-009-9448-0)

Mallik, S., Schmidt, M., Bauer, R. and Ekere, N.N. (2010) Evaluating solder paste behaviours through rheological test methods and their correlation to the printing performance. Soldering & Surface Mount Technology, 22 (4). pp. 42-49. ISSN 0954-0911 (doi:10.1108/09540911011076871)

Mallik, Sabuj (2010) Rheological characterisation and modelling of electronic materials: time-dependent behaviours of lead-free solder pastes and flux mediums. LAP Lambert Academic Publishing GmbH & Co. KG, Saarbrücken, Germany. ISBN 978-3-8433-7771-3

Mallik, Sabuj, Thieme, Jens, Bauer, R., Ekere, Ndy, Seman, Anton, Bhatti, Rajinderpal and Durairaj, Rajkumar (2010) Study of the rheological behaviour of Sn-Ag-Cu solder pastes and their correlation with printing performance. In: EPTC 2009 Proceedings of 2009 11th Electronics Packaging Technology Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 869-874. ISBN 978-1-4244-5099-2 (Print), 978-1-4244-5100-5 (e-ISBN) (doi:10.1109/EPTC.2009.5416423)

Moreira, C.L., Rua, David, Karfopoulos, E., Zountouridou, E., Soares, F.J., Bourithi, I., Grau, I., Peças Lopes, J.A., Cipcigan, L.M., Seca, Luis, Moschakis, Marios, Rocha Almeida, P.M., Moutis, P., Papadopoulos, P., Rei, R.J., Bessa, Ricardo J. and Skarvelis-Kazakos, S. (2010) Extend concepts of MG by identifying several EV smart control approaches to be embedded in the Smart Grid concept to manage EV individually or in clusters. Project Report. MERGE.

Otiaba, K.C., Ekere, N.N., Amalu, E.H., Bhatti, R.S. and Mallik, S. (2010) Thermal management materials for electronic control unit: trends, processing technology and R&D challenges. In: International Conference on Engineering Research & Development: Advances in Engineering Science & Technology, 7-9 September 2010, Benin City, Africa.

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Awad, B., Cipcigan, L.M. and Jenkins, N. (2010) Impact of residential charging of electric vehicles on distribution networks, a probabilistic approach. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2010) Micro-generation for 2050: life-cycle carbon footprint of micro-generation sources. In: 2009 44th International Universities’ Power Engineering Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-6823-2

Skarvelis-Kazakos, Spyros, Papadopoulos, Panagiotis, Grau, Iñaki, Gerber, Annelies, Cipcigan, Liana M., Jenkins, Nick and Carradore, Loredana (2010) Carbon optimized virtual power plant with electric vehicles. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

Wu, Ruiheng, Lidgey, F.J., Hayatleh, K. and Hart, B.L. (2010) Differential amplifier with improved gain-accuracy and linearity. Interntional Journal of Circuit Theory and Applications, 38 (8). pp. 829-844. ISSN 0098-9886 (doi:10.1002/cta.601)

Yang, Shangtong (2010) Concrete crack width under combined reinforcement corrosion and applied load. PhD thesis, University of Greenwich.

Zhang, Pengcheng and Gao, James (2010) Requirements driven knowledge system design for product development. In: Proceedings of the 6th CIRP-Sponsored International Conference on Digital Enterprise Technology. Advances in Intelligent and Soft Computing, 66/201 . Springer, Hong Kong, pp. 169-184. ISBN 9783642104299 ISSN 1867-5662 (doi:10.1007/978-3-642-10430-5_13)

2009

Baxter, David, Roy, Rajkumar, Doultsinou, Athanasia, Gao, James and Kalta, Mohamad (2009) A knowledge management framework to support product-service systems design. International Journal of Computer Integrated Manufacturing, 22 (12). pp. 1073-1088. ISSN 0951-192X (Print), 1362-3052 (Online) (doi:10.1080/09511920903207464)

Berkhauer-Smith, Samantha (2009) The integration of lean thinking and manufacturing business improvement methods within the aerospace supply chain. PhD thesis, University of Greenwich.

Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2009) Manufacturing knowledge verification in design support systems. International Journal of Production Research, 47 (12). pp. 3179-3204. ISSN 0020-7543 (Print), 1366–588X (Online) (doi:10.1080/00207540701802452)

Doultsinou, Athanasia, Roy, Rajkumar, Baxter, David, Gao, James and Mann, Andy (2009) Developing a service knowledge reuse framework for engineering design. Journal of Engineering Design, 20 (4). pp. 389-411. ISSN 0954-4828 (Print), 1466-1837 (Online) (doi:10.1080/09544820903149354)

Durairaj, R., Mallik, S., Seman, A. and Ekere, N.N. (2009) Investigation of wall-slip behaviour in lead-free solder pastes and isotropic conductive adhesives. Sadhana - Academy Proceedings in Engineering Sciences, 34 (5). pp. 799-810. ISSN 0256-2499 (Print), 0973-7677 (Online) (doi:10.1007/s12046-009-0046-5)

Durairaj, R., Mallik, S., Seman, A., Marks, A. and Ekere, N.N. (2009) Rheological characterisation of solder pastes and isotropic conductive adhesives used for flip-chip assembly. Journal of Materials Processing Technology, 209 (8). pp. 3923-3930. ISSN 0924-0136 (doi:10.1016/j.jmatprotec.2008.09.013)

Durairaj, R., Man, Lam Wai, Ramesh, S., Wea, Lim Chia, Leng, Eu Poh, Ekere, N.N., Mallik, S. and Seman, A. (2009) Investigation of wall-slip effect on lead-free solder paste and isotropic conductive adhesives. In: Electronics Packaging Technology Conference, 2009. EPTC '09. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 422-426. ISBN 978-1-4244-5099-2 (print), 978-1-4244-5100-5 (e-ISBN) (doi:10.1109/EPTC.2009.5416511)

Durairaj, R., Ramesh, S., Mallik, S., Seman, A. and Ekere, N. (2009) Rheological characterisation and printing performance of Sn/Ag/Cu solder pastes. Materials and Design, 30 (9). pp. 3812-3818. ISSN 0261-3069 (doi:10.1016/j.matdes.2009.01.028)

Durairaj, Rajkumar, Man, Lam Wai, Mallik, Sabuj and Ekere, Ndy (2009) Thixotropic studies of lead-based solder, lead-free solder and conductive adhesive pastes. In: 11th Electronic Material and Packaging Conference (EMAP), 1-3 Dec 2009, Penang, Malaysia. (Unpublished)

Gao, James, Baxter, David and Roy, Rajkumar (2009) Managing knowledge within the manufacturing enterprise: an overview. International Journal of Manufacturing Technology and Management (IJMTM), 18 (2). pp. 183-209. ISSN 1368-2148 (doi:10.1504/IJMTM.2009.026193)

Gao, James, Fei, Genyuan and Tang, X.Q. (2009) A TRIZ based methodology for the analysis of the coupling problems in complex engineering design. In: Proceedings of the 19th CIRP Design Conference – Competitive Design. Cranfield University Press, Cranfield University, pp. 285-292. ISBN 9780955743641

Mallik, S., Ekere, N.N., Durairaj, R., Marks, A.E. and Seman, A. (2009) Wall-slip effects in SnAgCu solder pastes used in electronics assembly applications. Materials & Design, 30 (10). pp. 4502-4506. ISSN 0261-3069 (doi:10.1016/j.matdes.2009.05.028)

Mallik, Sabuj (2009) Study of the time-dependent rheological behaviour of lead-free solder pastes and flux mediums used for flip-chip assembly applications. PhD thesis, University of Greenwich.

Mallik, Sabuj, Ekere, Ndy, Seman, Anton and Durairaj, Rajkumar (2009) Modelling the time-dependent behaviour of solder pastes used in the electronics assembly applications. In: 11th Electronic Material and Packaging Conference (EMAP 2009), 1-2 Dec 2009, Penang, Malaysia. (Unpublished)

Pillai, John (2009) Direct on-line measurement of wall friction of coal as an indicator of handleability. PhD thesis, University of Greenwich.

Sangelaji, Z. and Banks, S.P. (2009) Radial control design for a class of nonlinear systems. Control and Intelligent Systems, 37 (3). pp. 144-151. ISSN 1480-1752 (Print), 1925-5810 (Online) (doi:10.2316/Journal.201.2009.3.201-2018)

Sangelaji, Z. and Banks, S.P. (2009) Stabilisation of nonlinear systems using weighted angular method. IET Control Theory & Applications, 3 (4). pp. 445-451. ISSN 1751-8644 (Print), 1751-8652 (Online) (doi:10.1049/iet-cta.2007.0318)

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2009) Micro-generation for 2050: emissions performances of micro-generation sources during operation. Pollack Periodica, 4 (2). pp. 89-99. ISSN 1788-1994 (Print), 1788-3911 (Online) (doi:10.1556/Pollack.4.2009.2.9)

2008

Arshad, Kamran (2008) Opportunistic spectrum access for cognitive radio. In: Seminar on Opportunistic Spectrum Access for Cognitive Radio, 30 Dec 2008, GIFT University, Gujranwala, Pakistan. (Unpublished)

Aziz, Hayder, Li, Zhengxi and Gao, James (2008) Engineering design knowledge management in de-centralised virtual enterprises. Computer Aided Design and Applications, 5 (6). pp. 787-800. ISSN 1686-4360 (doi:10.3722/cadaps.2008.787-800)

Balasubramanyam, Ramkumar (2008) Adaptive iterative multiuser detection for wireless communication systems. PhD thesis, University of Greenwich.

Baxter, David, Gao, James, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2008) A framework to integrate design knowledge reuse and requirements management in engineering design. Robotics and Computer-Integrated Manufacturing, 24 (4). pp. 585-593. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.010)

Baxter, David, Rajkumar, Roy and Gao, James (2008) Design process knowledge reuse challenges and issues. Computer Aided Design and Applications, 5 (6). pp. 942-952. ISSN 1686-4360 (doi:10.3722/cadaps.2008.942-952)

Beams, Rodney and Coutroubis, Alec (2008) The use of computer based teaching (CBT) in the training of marine engineers. In: 2nd International Scientific Maritime Conference - Human Resources in the Shipping Industry: New Trends and Challenges in the 21st Century, 21-22 November 2008, Limassol. (Unpublished)

Callaghan, Peter and Batchelor, John C. (2008) Dual-band pin-patch antenna for wi-fi applications. IEEE Antennas and Wireless Propagation Letters, 7. pp. 757-760. ISSN 1536-1225 (doi:10.1109/LAWP.2008.2004885)

Callaghan, Peter and Batchelor, John C. (2008) Multiband low-profile antenna for remote antenna unit picocell applications. IEEE Transactions on Antennas and Propagation, 56 (8). pp. 2475-2480. ISSN 0018-926X (doi:10.1109/TAP.2008.927558)

Cheung, W.M., Matthews, P.C., Gao, J.X. and Maropoulos, P.G. (2008) Advanced product development integration architecture: an out-of-box solution to support distributed production networks. International Journal of Production Research, 46 (12). pp. 3185-3206. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:10.1080/00207540601039767)

Chi, Xuesong (2008) A web-based intelligent learning environment for the teaching of industrial continuous quality improvement. PhD thesis, University of Greenwich.

Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2008) Knowledge reuse in manufacturability analysis. Robotics and Computer Integrated Manufacturing, 24 (4). pp. 508-513. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.003)

Deng, T., Bingley, M.S., Bradley, M.S.A. and De Silva, S.R. (2008) A comparison of the gas-blast and centrifugal-accelerator erosion testers: The influence of particle dynamics. Wear, 265 (7-8). pp. 945-955. ISSN 0043-1648 (doi:10.1016/j.wear.2008.02.017)

Doultsinou, Athanasia, Roy, Rajkumar, Baxter, David and Gao, James (2008) Key service issues in two UK manufacturing companies from a PSS perspective. Proceedings of the Cranfield Multi-Strand Conference: Creating Wealth Through Research and Innovation (CMC 2008): 6-7 May 2008. Cranfield University Press, Cranfield University, pp. 287-292. ISBN 9780955743672

Durairaj, R., Mallik, S., Seman, A., Marks, A. and Ekere, N.N. (2008) Viscoelastic properties of solder paste and isotropic conductive adhesives used for flip-chip assembly. In: Electronic Manufacturing Technology Symposium (IEMT), 2008 33rd IEEE/CPMT International. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 1-8. ISBN 9781424433926 (print), 9781424433933 (electronic) ISSN 1089-8190 (doi:10.1109/IEMT.2008.5507801)

Durairaj, Rajkumar, Mallik, Sabuj and Ekere, Ndy (2008) Solder paste characterisation: towards the development of quality control (QC) tool. Soldering & Surface Mount Technology, 20 (3). pp. 34-40. ISSN 0954-0911 (doi:10.1108/09540910810885705)

Durairaj, Rajkumar, Mallik, Sabuj, Seman, Anton, Marks, Antony and Ekere, Ndy (2008) Investigation of wall-slip effect on paste release characteristic in flip-chip stencil printing process. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1328-1333. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763615)

Eadie, R. and Gao, James (2008) An industrial implementation of a methodology for the optimisation of product design tolerances. In: Kai, Cheng, Makatsoris, Harris C. and Harrison, David, (eds.) Advances in manufacturing technology XXII: the proceedings of the 6th International Conference on Manufacturing Research ICMR08, 9th-11th September 2008, London UK. Brunel University College, Brunel University, pp. 161-170. ISBN 9781902316604

Ekere, N and Mallik, Sabuj (2008) A methodology for characterising new lead-free solder paste formulations used for flip-chip assembly applications. In: Kobayashi, Akira, (ed.) Smart processing technology: SPT '07. High Temperature Society of Japan, Ibaraki, Japan, pp. 59-64.

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2008) Effect of long-term aging on the rheological characteristics and printing performance of lead-free solder pastes used for flip-chip assembly. Smart Processing Technology, 2. pp. 131-134.

Gao, James and Baxter, David (2008) Editorial for the special issue of RCIM for ICMR2005: Third International Conference on Manufacturing Research, Cranfield University, September 6th–9th 2005, Cranfield, UK. Robotics and Computer-Integrated Manufacturing, 24 (4). pp. 499-500. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.001)

Hossain, M., Wu, Ruiheng, Litchfield, Charan and Rapajic, Predrag (2008) Linearization of high frequency amplifier using a generalised signal-injection method: case study. In: Analog Signal Processing Conference 2008, 12 November 2008, Oxford Brookes University, Oxford, UK. (Unpublished)

Khan, Naushad Salim (2008) Handling characteristics of coal/biomass mixes: measurements and establishing benchmarks. PhD thesis, University of Greenwich.

Mallik, Sabuj, Ekere, Ndy, Durairaj, Rajkumar and Marks, Antony (2008) An investigation into the rheological properties of different lead-free solder pastes for surface mount applications. Soldering & Surface Mount Technology, 20 (2). pp. 3-10. ISSN 0954-0911 (doi:1108/09540910810871511)

Mallik, Sabuj, Ekere, Ndy, Marks, Antony, Seman, Anton and Durairaj, Rajkumar (2008) Modelling of the time-dependent flow behaviour of lead-free solder pastes used for flip-chip assembly applications. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 1219-1224. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684527)

Mallik, Sabuj, Schmidt, M., Bauer, R. and Ekere, Ndy (2008) Influence of solder paste components on rheological behaviour. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, USA, pp. 1135-1140. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684512)

Marks, A.E., Mallik, S., Ekere, N.N. and Seman, A. (2008) Effect of temperature on slumping behaviour of lead-free solder paste and its rheological simulation. 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 829-832. ISBN 97814244-28137 (Print), 978-1-4244-2814-4 (Electronic) (doi:10.1109/ESTC.2008.4684459)

Mayur, Yaul, Bhatti, Rajinderpal and Lawrence, Stephen (2008) Evaluating the process of borosilicate glass capillaries used for fabrication of in-vitro fertilization (IVF) micro-pipettes. Biomedical Microdevices, 10 (1). pp. 123-128. ISSN 1387-2176 (doi:10.1007/s10544-007-9117-8)

Sahatoo, Divesh, Chowdary, Boppana V., Ali, Fahraz F. and Bhatti, Rajinderpal (2008) Slicing issues in CAD translation to STL in rapid prototyping. Proceedings of The 2008 IAJC-IJME International Conference. International Association of Journals and Conferences/International Journal of Modern Engineering, California State University, Northridge. ISBN 9781606433799

Sangelaji, Z. and Banks, S.P. (2008) Control design and stabilization analysis of non-linear systems using angular representations. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 222 (6). pp. 457-463. ISSN 0959-6518 (Print), 2041-3041 (Online) (doi:10.1243/09596518JSCE502)

Sangelaji, Zahra and Banks, Steve (2008) Dynamical Radial Control of Nonlinear Systems. In: Proceedings of the UKACC International Conference on Control 2008. UKACC, pp. 1-5. ISBN 9780955615214

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) Development of an in-situ, non-destructive ultrasonic monitoring technique for solder pastes. 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 209-214. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684351)

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) In-situ non-destructive ultrasonic rheology technique for monitoring different lead-free solder pastes for surface mount applications. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1448-1454. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763635)

Wu, Ruiheng, Lidgey, F.J. and Hayatleh, K. (2008) Design of differential amplifier with negative impedance compensation. 2008 4th International Conference on Circuits and Systems for Communications. Institute of Electrical and Electronics Engineers, New York, pp. 589-593. ISBN 9781424417070 (doi:10.1109/ICCSC.2008.131)

Wu, Ruiheng and Wang, Chen (2008) Stability analysis of the amplifier with negative impedance compensation. 2008 51st Midwest Symposium on Circuits and Systems. Institute of Electrical and Electronics Engineers, New York, pp. 803-806. ISBN 9781424421664

Yaul, M., Culme-Seymour, E., Ruban, L., Veratich, F. S. and Bhatti, R. (2008) Firepolished glass microtools for human embryonic stem cell (HESC) cultivation. In: 7th Annual UKSB Conference and Postgraduate Day, 26-28 June 2008, University of Liverpool, UK. (Unpublished)

2007

Bhatti, R. and Berkhauer-Smith, S. (2007) An integrated methodology of manufacturing business improvement strategies. In: Olhager, J. and Persson, F., (eds.) Advances in production management systems. International Federation for Information Processing, 246 . Springer, Boston, USA, pp. 355-362. ISBN 9780387741567 (doi:http://link.springer.com/chapter/10.1007/978-0-387-74157-4_42)

Bhatti, Rajinderpal and Berkhauer-Smith, Samantha (2007) Integrating both technical and cultural aspects of process improvement. In: 5th International Conference on Manufacturing Research (ICMR 2007), 11- 13 September 2007, De Montfort University Leicester. (Unpublished)

Chen, Li Choo (2007) Optimisation of rule-based testing for scheduling within a distributed computing environment. PhD thesis, University of Greenwich.

Chowdary, Boppana V., Sahatoo, Divesh R. and Bhatti, Raj (2007) Some STL file generation issues in rapid prototyping. In: Esparragoza, Ivan E., Bermudez, Manuel and Petrie, Maria Larrondo, (eds.) 5th Latin American and Caribbean Conference for Engineering and Technology Developing Entrepreneural Engineers for the Sustainable Growth of Latin American and Caribbean: Education, Innovation, Technology, and Practice. Latin American and Caribbean Consortium of Engineering Institutions, Florida. ISBN 098228960X

Coutroubis, Alexander and Beams, Rodney (2007) The use of computer based training (CBT) in the training of marine engineers. In: LMA 9th International Conference Maritime Transport and Infrastructure-2007, 19-20 April 2007, Riga, Latvia. (Unpublished)

Ekere, Ndy, Mallik, Sabuj, Durairaj, Rajkumar and Marks, Antony (2007) A study of the rheological properties of lead free solder paste formulations used for flip-chip interconnection. 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. IEEE/CPM International Electronics Manufacturing Technology Symposium . IEEE, New York, USA, pp. 165-171. ISBN 9781424413355 (doi:10.1109/IEMT.2007.4417065)

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2007) Effect of abandon time on print quality and rheological characteristics for lead-free solder pastes used for flip-chip assembly. 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. Ieee/Cpmt International Electronics Manufacturing Technology Symposium . Institute of Electrical and Electronics Engineers, New York, USA, pp. 14-19. ISBN 9781424413355 (doi:10.1109/IEMT.2007.4417048)

Gao, James and Baxter, David (2007) Enabling technologies and frameworks for new product development: a selection of papers from ICMR2005. International Journal of Production Research, 45 (7). pp. 1485-1487. ISSN 0020-7543 (doi:10.1080/00207540600942201)

Gao, James, Baxter, David, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2007) An engineering design knowledge reuse methodology using process modelling. Research in Engineering Design, 18 (1). pp. 37-48. ISSN 0934-9839 (doi:10.1007/s00163-007-0028-8)

Gao, James, Baxter, David, Doultsinou, Nancy and Roy, Rajkumar (2007) Identification of service knowledge types for technical product-service systems. Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath, pp. 549-555.

Gao, James and Bradfield, Daniel J. (2007) A methodology to facilitate knowledge sharing in the new product development process. International Journal of Production Research, 45 (7). pp. 1489-1504. ISSN 0020-7543 (doi:10.1080/00207540600942227)

Gao, James, Bradfield, Daniel J. and Soltan, Hossein (2007) Development of a tool to support the dissemination of information about knowledge in multilingual product development teams. In: Garetti, Marco, Terzi, Sergio, Ball, Peter D. and Han, Soonhung, (eds.) Proceedings of the International conference on product lifecycle management: assessing the industrial relevance. Inderscience Enterprises Ltd, Genva Aeroport, pp. 261-270. ISBN 9780907776321

Gao, James, Bradfield, Daniel J. and Soltan, Hossein (2007) A metaknowledge approach to facilitate knowledge sharing in the global product development process. Computer-Aided Design and Applications, 4 (1-4). pp. 519-528. ISSN 1686-4360 (doi:10.3722/cadaps.2007.519-528)

Gao, James and Jian, Amanda (2007) A multi-agent based knowledge search methodology for product development. Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.

Gao, James and Kuang, Li (2007) A framework to integrate manufacturing information systems. In: Cunha, Pedro Filipe and Maropoulos, Paul G., (eds.) Digital enterprise technology perspectives and future challenges. Springer, New York, pp. 369-376. ISBN 9780387498638 (doi:10.1007/978-0-387-49864-5)

Gao, James and Sharma, R. (2007) A knowledge-based manufacturing and cost evaluation system for product design/re-design. The International Journal of Advanced Manufacturing Technology, 33 (9-10). pp. 856-865. ISSN 0268-3768 (doi:10.1007/s00170-006-0530-6)

Gao, James, Zhang, Pengcheng, Baxter, David and Kalta, Mo (2007) Developing a design process model for the reuse of knowledge. Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.

Koufopoulos, Dimitrios N., Coutroubis, Alec and Lagoudis, Ioannis N. (2007) One size does not fit all: revisiting conceptual wisdom by assessing corporate governance practices of the Greek shipping management companies. In: International Association of Maritime Economists, IAME, Greece Challenges and Trends in Shipping, Markets, Investments and Policies, 4-6 July 2007, Athens. (Unpublished)

Li, Ji (2007) A study of the solid particle erosion performance of automative and other novel low carbon steels. PhD thesis, University of Greenwich.

Ma, Mingchao (2007) Distributed RBAC for subscription-based remote network services. PhD thesis, University of Greenwich.

Mountney, S.L., Gao, James and Wiseall, S. (2007) A knowledge system to support manufacturing knowledge during preliminary design. International Journal of Production Research, 45 (7). pp. 1521-1537. ISSN 0020-7543 (doi:10.1080/00207540600942300)

Mwinkuka, T., Hinduja, S. and Owodunni, Oladele (2007) Extendible operation sequencing for turn-milled components. CIRP Annals - Manufacturing Technology, 56 (1). pp. 473-478. ISSN 0007-8506 (doi:10.10.1016/j.cirp.2007.05.113)

Rapajic, Predrag, Kabir, Ahsaul, Huang, Kao-Cheng and Wu, Ruiheng (2007) Next generation identity card: RFID-based automatic access control system for universities. In: Kartalopoulos, Stamatios, Demiralp, Metin, Mastorakis, Nikos, Soni, Ritu and Nassar, Hamed, (eds.) Selected Topics on Circuits, Systems, Electronics, Control & Signal Processing: Proceedings of the 6th WSEAS International Conference on Circuits, Systems, Electronics, Control & Signal Processing. Electrical and Computer Engineering . WSEAS Press, Singapore, pp. 480-483. ISBN 9789606766282

Wu, Ruiheng, Lidgey, F.J. and Hayatleh, K. (2007) Design of amplifiers with high gain accuracy and high linearity. 2007 50TH Midwest Symposium on Circuits and Systems. Midwest Symposium on Circuits and Systems Conference Proceedings, 1-3 . Institute of Electrical and Electronics Engineers, New York, pp. 269-272. ISBN 9781424411757 (doi:10.1109/MWSCAS.2007.4488586)

2006

Arokiam, A. C., Barashev, A. V., Bacon, D. J. and Osetsky, Yu. N. (2006) Characteristics of the interaction of Cu-rich precipitates with irradiation-produced defects in α-Fe. Philosophical Magazine Letters, 85 (9). pp. 491-501. ISSN 0950–0839 (Print), 1362–3036 (Online) (doi:10.1080/09500830500300047)

Durairaj, Rajkumar (2006) Rheological characterisation of solder pastes and isotropic conductive adhesives (ICAs) for microsystems assembly technology. PhD thesis, University of Greenwich.

Dyrøy, Are (2006) Quantification and mitigation of segregation in the handling of alumina in aluminium production. PhD thesis, University of Greenwich.

Ekere, Ndy, Durairaj, Rajkumar, Mallik, Sabuj, Marks, Antony, Bauer, R. and Winter, M. (2006) Rheological characterisation of new lead-free solder paste formulations for flip-chip assembly. ESTC 2006: 1st Electronics Systemintegration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, pp. 995-1000. ISBN 1424405521 (doi:10.1109/ESTC.2006.280132)

Gao, James, Cheung, W.M., Bramall, D.G., Maropoulos, Paul G. and Aziz, Hayder (2006) Organizational knowledge encapsulation and re-use in collaborative product development. International Journal of Computer Integrated Manufacturing, 19 (7). pp. 736-750. ISSN 0951-192X (doi:10.1080/09511920500504479)

Hettiaratchi, Kaushika (2006) A comparison between the pressure gradients in vertical and horizontal pneumatic conveying, with an investigation into the effect of pipeline bore in vertical conveying. PhD thesis, University of Greenwich.

Salam, B. and Ekere, Ndy (2006) A study of inter-metallic compounds (IMC) formation and growth in ultra-fine pitch Sn-Ag-Cu lead-free solder joints. ESTC 2006: 1st Electronics Systemintegration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, pp. 988-994. ISBN 1424405521 (doi:10.1109/ESTC.2006.280131)

2005

Moorman, John Everard (2005) A method for the probabilistic method assessment of structures containing defects. PhD thesis, University of Greenwich.

2004

Bradley, Michael, Bingley, Mark and Mengistu, Samuel (2004) Frictional characteristics of steel plates during abrasive particle flow: A comparison of in situ measurements made on a linear abrasive wear tester with those on a Jenike shear tester Jenike shear tester. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 218 (4). pp. 221-235. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/0954408042466963)

Deng, Tong, Bingley, Mark S. and Bradley, Michael S. A. (2004) The influence of particle rotation on the solid particle erosion rate of metals. Wear, 256 (11-12). pp. 1037-1049. ISSN 0043-1648 (doi:10.1016/S0043-1648(03)00536-2)

2003

Durairaj, Rajkumar, Ekere, Ndy, Salam, B., Jackson, G. and He, Da (2003) Monte Carlo study of solder paste microstructure and ultra-fine-pitch stencil printing. Journal of Materials Science: Materials in Electronics, 14 (8). pp. 501-506. ISSN 0957-4522 (doi:10.1023/A:1023929119055)

1996

Burnett, Anthony John (1996) The use of laboratory erosion tests for the prediction of wear in pneumatic conveyor bends. PhD thesis, University of Greenwich.

1993

Tao, Mei and Seals, R.C. (1993) Multicomponent gas-mixture measurements using an array of gas sensors and an artificial neural-network. Journal of Microcomputer Applications, 16 (2). pp. 203-210. (doi:10.1006/jmca.1993.1018)

1988

Jones, Mark G. (1988) The influence of bulk particulate properties on pneumatic conveying performance. PhD thesis, Thames Polytechnic.

1985

Kessel, Stephen Ronald (1985) The interaction between rotary valves and pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

This list was generated on Wed Oct 12 16:18:27 2016 BST.