Items where School / Department / Research Groups is "School of Engineering"

University Structure (5836)
- School of Engineering (420)
  - Department of Business Information Technology & Enterprise (2)
  - Department of Civil Engineering (64)
  - Department of Computer & Communications Engineering (70)
  - Department of Engineering Systems (139)
  - Electronics Manufacturing Engineering Research Group (39)
  - Infrastructure Management Research Group (2)
  - Innovative Product Development Research Group (8)
  - Internet Security Research Laboratory (12)
  - Mobile & Wireless Communications Engineering Research Laboratory (18)
  - Wolfson Centre (44)

Group by: Date | Creators | Item Type | Uncontrolled Keywords | No Grouping

Number of items at this level: 418.

(MME)

Tandur, Deepaknath, Duplicy, Jonathan, Arshad, Kamran, Depierre, David, Moessner, Klaus, Lehtomäki, Janne, Briggs, Keith, Gonçalves, Luis and Gameiro, Atílio (2012) Cognitive radio systems evaluation: measurement, modeling, and emulation approach. IEEE Vehicular Technology Magazine, 7 (2). pp. 77-84. ISSN 1556-6072 (doi:10.1109/MVT.2012.2190219)

20kW bidirectional dual active bridge DC-DC converter prototype

Naayagi, R.T., Shuttleworth, R. and Forsyth, A.J. (2011) Investigating the effect of snubber capacitor on high power IGBT turn-off. In: Proceedings of the 2011 1st International Conference on Electrical Energy Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineering, Inc., Piscataway, NJ, USA, pp. 50-55. ISBN 9781612843780 (doi:10.1109/ICEES.2011.5725301)

a Decode-and-Forward (DF)

Kanakis, T., Litchfield, C. and Rapajic, P. (2009) Adaptive virtual relaying MIMO decode and forward. In: Wireless Communications & Signal Processing. Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ, USA, pp. 1-5. ISBN 978-1-4244-5668-0 (electronic), 978-1-4244-4856-2 (print) (doi:10.1109/WCSP.2009.5371515)

abrasives

Burnett, A.J., De Silva, S.R. and Reed, A.R. (1995) Comparisons between "sand blast" and "centripetal effect accelerator" type erosion testers. Wear, 186-87 (PART 1). pp. 168-178. ISSN 0043-1648 (doi:10.1016/0043-1648(95)07143-1)

accelerated temperature cycle (ATC)

Amalu, E.H, Ekere, N.N. and Aminu, G. (2011) Effects of inter-metallic compound on high temperature reliability of flip chip interconnects for fine pitch applications. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 208-213. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145173)

access points

Chen, Y., Hu, L., Yuen, C., Zhang, Y., Zhang, Z. and Rapajic, P. (2009) Intrinsic measure of diversity gains in generalised distributed antenna systems with cooperative users. IET Communications, 3 (2). pp. 209-222. ISSN 1751-8628 (Print), 1751-8636 (Online) (doi:10.1049/iet-com:20080064)

acoustic testing

Takyi, G., Amalu, E.H. and Bernasko, P.K. (2011) Effect of solder joint integrity on the thermal performance of a TEC for a 980nm pump laser module. Soldering and Surface Mount Technology, 23 (2). pp. 115-119. ISSN 0954-0911 (print) (doi:10.1108/09540911111120186)

acoustic wave propagation

Abramovich, H., Burgard, M., Edery-Azulay, L., Evans, K. E., Hoffmeister, M., Miller, W., Scarpa, F., Smith, C. W., Tee, Kong-Fah, Schönecker, A. and Seffner, L. (2008) Sensing and actuation of smart chiral honeycombs. Proceedings of SPIE, 6935, 693506. ISSN 0277-786X (doi:10.1117/12.775588)

Tee, K.T., Spadoni, A., Scarpa, F. and Ruzzene, M. (2010) Wave propagation in auxetic tetrachiral honeycombs. Journal of Vibration and Acoustics , 132 (3). 031007-031015. ISSN 0739-3717 (doi:10.1115/1.4000785)

activity theory

Macpherson, Allan, Kofinas, Alexander, Jones, Oswald and Thorpe, Richard (2010) Making sense of mediated learning: cases from small firms. Management Learning, 41 (3). pp. 303-323. ISSN 1350-5076 (Print), 1461-7307 (Online) (doi:10.1177/1350507609357002)

Ad-Hoc on demand distance vector

Bello, L., Bakalis, P., Manam, S.J., Eneh, T.I. and Anang, K.A. (2011) Power control and performance comparison of AODV and DSR ad hoc routing protocols. In: Computer Modelling and Simulation (UKSim), 2011 UkSim 13th International Conference on. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 457-460. ISBN 978-1-61284-705-4 (doi:10.1109/UKSIM.2011.93)

adaptive algorithm

Krasevac, Zarko B. and Rapajic, Predrag B. (2008) Adaptive AR channel model identification of time-varying communication systems. In: 2008 IEEE 10th International symposium on spread spectrum techniques and applications. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 618-622. ISBN 9781424422036 (doi:10.1109/ISSSTA.2008.121)

adaptive algorithms

Qureshi, Athar, Kanakis, Triantafyllos and Rapajic, Predrag (2010) Adaptive combining of signals with unequal noise variances. In: 2nd International Conference on Computational Intelligence, Modelling and Simulation (CIMSiM). IEEE Computer Society, Conference Publishing Services, Washington, USA, pp. 488-493. ISBN 978-1-4244-8652-6 (Print), 978-0-7695-4262-1 (Online) (doi:10.1109/CIMSiM.2010.21)

adaptive combining technique

adaptive detectors

Eneh, T., Rapajic, P., Oletu, G., Anang, K. and Bello, L. (2011) Adaptive MMSE multiuser detection for MIMO OFDM over turbo-equalization for single-carrier transmission wireless channel. In: IWCMC 2011 - 7th International Wireless Communications and Mobile Computing Conference. IEEE Computer Society, Piscataway, USA, pp. 1408-1412. ISBN 9781424495399 (doi:10.1109/IWCMC.2011.5982744)

adaptive equalizers

adaptive filter

Eneh, Titus, Oletu, Grace, Anang, Kwashie, Rapajic, Predrag and Eze, J.U. (2011) Adaptive vector precoding for multiuser MIMO OFDM. In: International Conference on ICT for Africa 2011 (ICT4Africa 2011) , 23-26 March 2011, Covenant University, Otta, Nigeria. (Submitted)

Eneh, Titus Ikechukwu, Oletu, Grace, Rapajic, Predrag, Anang, Kwashie and Bello, Lawal (2011) Adaptive multiuser receivers scheme for MIMO OFDM over iterative-equalization for single-carrier transmission. Journal of Emerging Trends in Engineering and Applied Sciences (JETEAS), 2 (2). pp. 282-288. ISSN 2141-7016

adaptive filters

Eneh, Titus, Rapajic, Predrag, Anang, Kwashie, Bello, L. and Qureshi, Athar (2010) Information capacity of the communications systems with adaptive MMSE receivers. In: International Conference On Future Information Technology (ICFIT 2010), 14-15 Dec 2010, Changsha, Hunan, China.

adaptive minimum mean square errors

adaptive MMSE

Qureshi, A., Kanakis, T., Litchfield, C. and Rapajic, P. (2010) Adaptive MMSE multiuser detection (A-MMSE-MUD) in asynchronous cooperative CDMA networks. In: SoftCOM 2010 - International Conference on Software, Telecommunications and Computer Networks. IEEE Computer Society, Piscataway, USA, 260 -264. ISBN 9781424486632 (Print), 9789532900040 (Online)

Adaptive Multiuser Detection

Eneh, T., Rapajic, P., Anang, K.A. and Bello, Lawal (2012) Adaptive MMSE Multiuser Detection in MIMO OFDM wireless communication system. In: Advanced Materials Research. Scientific Net, pp. 233-240. ISBN 978-3-03785-270-5 ISSN 1662-8985 (doi:10.4028/www.scientific.net/AMR.367.233)

Eneh, Titus Ikechukwu (2011) Adaptive MMSE multiuser receivers in MIMO OFDM wireless communication systems. PhD thesis, University of Greenwich.

Qureshi, Athar, Kanakis, Triantafyllos and Rapajic, Predrag (2011) Interference resistance of adaptive multiuser detection in asynchronous detect and forward relaying CDMA networks. In: 2011 Baltic Congress on Future Internet Communications (BCFIC Riga 2011). IEEE Explore, Piscataway, NJ, USA, pp. 90-95. ISBN 9781424485116 (doi:10.1109/BCFIC-RIGA.2011.5733225)

adaptive ordering

Trajkovic, Vladimir D., Rapajic, Predrag and Kennedy, Rodney A. (2008) Adaptive ordering for imperfect successive decision feedback multiuser detection. IEEE Transactions on Communications, 56 (2). pp. 173-176. ISSN 0090-6778 (doi:10.1109/TCOMM.2008.040650)

adaptive receiver

Bello, Lawal, Bakalis, Panos, Rapajic, Predrag, Anang, Kwashie A. and Eneh, Titus I. (2011) Adaptive receiver power routing protocol for mobile ad hoc wireless network. Journal of Communications, 6 (7). pp. 571-580. ISSN 1796-2021 (doi:10.4304/jcm.6.7.571-580)

adaptive signal combining

Qureshi, A., Kanakis, T. and Rapajic, P. (2010) Adaptive signal combining with unequal channel noise variances. International Journal of Simulation: Systems, Science and Technology, 11 (6). pp. 14-21. ISSN 1473 804x (online), 1473 8031 (print)

adaptive systems

Eneh, T., Rapajic, P. and Anang, K. (2011) Adaptive MMSE multiuser receivers in MIMO OFDM wireless communication. In: Communication Technology (ICCT), 2010 12th IEEE International Conference on. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 934-937. ISBN 978-1-4244-6868-3 (doi:10.1109/ICCT.2010.5688544)

Adaptive Virtual Relaying MIMO (AV-RMIMO)

additive white Gaussian noise (AWGN)

Eneh, T., Rapajic, P., Anang, K., Bakalis, P. and Bello, L. (2012) Information capacity of adaptive MIMO OFDM wireless communication systems. In: Adaptive Science and Technology (ICAST). Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 157-164. ISBN 978-1-4673-0758-1 (doi:10.1109/ICASTech.2011.6145168)

adhesion

Ermis, Ertan, Farnish, Richard J., Berry, Rob and Bradley, Michael S.A. (2008) Direct measurement of powder flavour adhesion on to a food surface using a novel adhesion tester. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 803-810. ISBN 9788272062896

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2009) Direct measurement of powder flavor adhesion onto crisp surface using a novel adhesion tester. Particulate Science and Technology, 27 (4). pp. 362-372. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:10.1080/02726350902994035)

adhesion strength

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2011) Centrifugal tester versus a novel design to measure particle adhesion strength and investigation of effect of physical characteristics (size, shape, density) of food particles on food surfaces. Journal of Food Engineering, 104 (4). pp. 518-524. ISSN 0260-8774 (doi:10.1016/j.jfoodeng.2011.01.008)

adhesion testing methods

Ermis, Ertan (2011) Establishment of a repeatable test procedure for measuring adhesion strength of particulates in contact with surfaces. PhD thesis, University of Greenwich.

adhesives

Amalu, Emeka H., Ekere, Ndy and Mallik, Sabuj (2011) Evaluation of rheological properties of lead-free solder pastes and their relationship with transfer efficiency during stencil printing process. Materials and Design, 32 (6). pp. 3189-3197. ISSN 0261-3069 (doi:10.1016/j.matdes.2011.02.045)

Durairaj, Rajkumar (2006) Rheological characterisation of solder pastes and isotropic conductive adhesives (ICAs) for microsystems assembly technology. PhD thesis, University of Greenwich.

advanced characterization

Mallik, Sabuj, Ekere, Ndy, Marks, Antony, Seman, Anton and Durairaj, Rajkumar (2010) Modeling the structural breakdown of solder paste using the structural kinetic model. Journal of Materials Engineering and Performance, 19 (1). pp. 40-45. ISSN 1059-9495 (Print) 1544-1024 (Online) (doi:10.1007/s11665-009-9448-0)

AEAD

Adekunle, A.A. and Woodhead, S.R. (2010) An efficient authenticated-encryption with associated-data block cipher mode for wireless sensor networks. In: Wired/Wireless Internet Communications. 8th International Conference, WWIC 2010, Lulea, Sweden, June 1-3, 2010. Proceedings. Lecture Notes in Computer Science (6074). Springer, Berlin / Heidelberg / NewYork, pp. 375-385. ISBN 978-3-642-13314-5 (doi:10.1007/978-3-642-13315-2_31)

AEAD mode

Adekunle, A.A. and Woodhead, S.R. (2012) An AEAD cryptographic framework and tiny AEAD construct for secure WSN communication. In: Wireless Advanced (WiAd), 2012. IEEE Conference Publications . Institution of Electrical and Electronics Engineering, Inc., Piscataway, N.J, USA, pp. 1-5. ISBN 9781457721939 (doi:10.1109/WiAd.2012.6296560)

aerospace

Berkhauer-Smith, Samantha (2009) The integration of lean thinking and manufacturing business improvement methods within the aerospace supply chain. PhD thesis, University of Greenwich.

aerospace energy storage applications

aerospace manufacturing

Zhu, Haihua, Gao, James, Li, Dongbo and Tang, Dunbing (2012) A Web-based Product Service System for aerospace maintenance, repair and overhaul services. Computers in Industry, 63 (4). pp. 338-348. ISSN 0166-3615 (doi:10.1016/j.compind.2012.02.016)

AES block-cipher

Adekunle, A.A. and Woodhead, S.R. (2010) A resourceful combined block cipher mode of operation for packetised network communication. In: Proceedings - NGMAST 2010: 4th International Conference on Next Generation Mobile Applications, Services, and Technologies. IEEE Computer Society, Piscataway, USA, pp. 180-185. ISBN 9781424476497 (doi:10.1109/NGMAST.2010.44)

ageing

Bernasko, Peter, Mallik, Sabuj, Ekere, Ndy and Takyi, G. (2011) Evaluating the effect of pad sizes on the inter-metallic layer formation and growth for Sn-Ag-Cu solders on Cu metallization. In: International Conference on Electronics Packaging (ICEP) 2011, 13-15 April 2011, Nara Prefectural New Public Hall, Nara, Japan.

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2008) Effect of long-term aging on the rheological characteristics and printing performance of lead-free solder pastes used for flip-chip assembly. Smart Processing Technology, 2. pp. 131-134.

agent construction tools

Jian, Guo, Gao, James and Wang, Yinglin (2010) A multi-agent based knowledge search framework to support the product development process. International Journal of Computer Integrated Manufacturing, 23 (3). pp. 237-247. ISSN 0951-192X (doi:10.1080/09511920903529222)

agent technology

Jian, Guo (2011) Knowledge search for new product development: a multi-agent based methodology. PhD thesis, University of Greenwich.

aggregate

Zhou, X.Z., Zheng, J.J. and Li, Chun-Qing (2006) An analytical method for prediction of the elastic modulus of concrete. Magazine of Concrete Research, 58 (10). pp. 665-673. ISSN 0024-9831 (doi:10.1680/macr.2006.58.10.665)

aggregation

Christakis, N., Wang, J., Patel, M.K., Bradley, M.S.A., Leaper, M.C. and Cross, M. (2006) Aggregation and caking processes of granular materials: continuum model and numerical simulation with application to sugar. Advanced Powder Technology, 17 (5). pp. 543-565. ISSN 0921-8831 (doi:10.1163/156855206778440480)

aggregation approach

Raab, A. F., Ferdowsi, M., Karfopoulos, E., Unda, I. Grau, Skarvelis-Kazakos, S., Papadopoulos, P., Abbasi, E., Cipcigan, L.M., Jenkins, N., Hatziargyriou, N. and Strunz, K. (2011) Virtual power plant control concepts with electric vehicles. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082214)

air effect segregation

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2011) Testing of powders for sensitivity to air effect segregation. Powder Metallurgy, 54 (4). pp. 468-470. ISSN 0032-5899 (Print), 1743-2901 (Online) (doi:10.1179/174329011X13073642060730)

air induced segregation

Deng, Tong, Paul, Kirsty A., Bradley, Michael S.A., Immins, Lee, Preston, Chris, Scott, Jerry F. and Welfare, Eloise H. (2010) Investigations on air induced segregation of pharmaceutical powders and effect of material flow functions. Powder Technology, 203 (2). pp. 354-358. ISSN 0032-5910 (doi:10.1016/j.powtec.2010.05.028)

air pollution

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2010) Micro-generation for 2050: life-cycle carbon footprint of micro-generation sources. In: 2009 44th International Universities’ Power Engineering Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-6823-2

air-gaps

Xiao, Nan, Chen, Hua Peng, Sun, Liqiang and Wang, Hai (2011) New open-web roofs for integrating heat preservation & insulation and structural functions. In: 2011 International Conference on Multimedia Technology, ICMT 2011. IEEE Computer Society, Piscataway, USA, pp. 1123-1126. ISBN 9781612847719 (doi:10.1109/ICMT.2011.6002873)

airborne particle concentration

Murnane, S.N., Barnes, R.N., Woodhead, Steve and Amadi-Echendu, J.E. (1996) Electrostatic modelling and measurement of airborne particle concentration. IEEE Transactions on Instrumentation and Measurement, 45 (2). pp. 488-492. ISSN 0018-9456

airborne particles concentration

Murnane, S.N., Barnes, R.N., Woodhead, Steve and Amadi-Echendu, J.E. (1995) Electrostatic modelling and measurement of airborne particles concentration. In: 1995 IEEE Instrumentation and Measurement Technology. Institute of Electrical and Electronics Engineers, New York, pp. 762-765. ISBN 978-0780326156 (doi:10.1109/IMTC.1995.515418)

Al/SiC

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy and Mallik, Sabuj (2011) Advanced thermal management materials for heat sinks used in microelectronics. In: EMPC-2011: 18th European Microelectronics and Packaging Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-8. ISBN 9781467306942

algorithm

Chen, Yifan, Gunawan, Erry, Low, Kay Soon, Wang, Shih-Chang, Soh, Cheong Boon and Putti, Thomas Choudary (2008) Effect of lesion morphology on microwave signature in 2-D ultra-wideband breast imaging. IEEE Transactions on Biomedical Engineering, 55 (8). pp. 2011-2021. ISSN 0018-9294 (doi:10.1109/TBME.2008.921136)

Eneh, Titus Ikechukwu (2011) Adaptive MMSE multiuser receivers in MIMO OFDM wireless communication systems. PhD thesis, University of Greenwich.

algorithms

Arshad, Kamran, Imran, Muhammad Ali and Moessner, Klaus (2010) Collaborative spectrum sensing optimisation algorithms for cognitive radio networks. International Journal of Digital Multimedia Broadcasting, 2010:424036. pp. 1-20. ISSN 1687-7578 (Print), 1687-7586 (Online) (doi:10.1155/2010/424036)

Bakalis, P.S. and Ellis, J.E. (1995) The use of optimisation algorithms as an aid for determining process control configurations. In: Large Scale Systems: Postprint Volume from the 7th IFAC/IFORS/IMACS Symposium, London, UK, 11-13 July 1995: Theory and Applications, 1995. IPPV IFAC Postprint . Pergamon, pp. 333-338. ISBN 0080423655

all pass filter

Oletu, G., Rapajic, P., Eneh, T. and Anang, K. (2012) Enhanced equalization for mobile communication systems. In: Computer Modeling and Simulation (EMS). The Institute of Electrical and Electronics Engineers, Inc. , Piscataway, NJ, USA, pp. 446-450. ISBN 978-1-4673-0060-5 (doi:10.1109/EMS.2011.32)

aluminium

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy, Mallik, Sabuj, Amalu, Emeka and Otiaba, Kenny (2011) Investigation of effects of heat sinks on thermal performance of microelectronic package. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 127-132. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145164)

aluminium production

Dyroy, Are (2006) Quantification and mitigation of segregation in the handling of alumina in aluminium production. PhD thesis, University of Greenwich.

aluminum hydroxide

Woodhead, Steve and Armour-Chelu, David (2003) The influence of humidity, temperature and other variables on the electric charging characteristics of particulate aluminium hydroxide in gas-solid pipeline flows. Journal of Electrostatics, 58 (3-4). pp. 171-183. ISSN 0304-3886 (doi:10.1016/S0304-3886(03)00046-9)

ambiguity function (AF)

Nijsure, Y., Chen, Y., Rapajic, P., Yuen, C., Chew, Y.H. and Qin, T.F. (2010) Information-theoretic algorithm for waveform optimization within ultra wideband cognitive radar network. In: International Conference on Ultra-Wideband (ICUWB). IEEE International Conference on Ultra-Wideband (ICUWB) . IEEE Xplore Digital Library, Nanjing, pp. 1-4. ISBN 978-1-4244-5305-4 (print) ISSN 978-1-4244-5306-1 (online) (doi:10.1109/ICUWB.2010.5616308)

amphoteric oxide

Dyroy, Are (2006) Quantification and mitigation of segregation in the handling of alumina in aluminium production. PhD thesis, University of Greenwich.

amplifier

Ali, M. Tanseer, Wu, Ruiheng, Callaghan, Peter and Rapajic, Predrag (2011) Experimental study of a highly linear amplifier using negative impedance compensation technique. In: Proceedings of the Active RF Devices, Circuits and Systems Seminar. IET Conference Publications . Institution of Engineering and Technology, London, UK, pp. 35-38. ISBN 978-1-84919-540-9 (Online) (Unpublished) (doi:10.1049/ic.2011.0211)

Ali, M.Tanseer, Wu, Ruiheng, Callaghan, Peter and Rapajic, Predrag (2011) Design of a highly linear high frequency amplifier using Volterra model. In: Microwave, Antenna, Propagation, and EMC Technologies for Wireless Communications (MAPE). Microwave, Antenna, Propagation, and EMC Technologies for Wireless Communications (MAPE) . Institute of Electrical and Electronic Engineers, Pistacaway, USA, pp. 355-358. ISBN 978-1-4244-8268-9 (doi:10.1109/MAPE.2011.6156259)

Wu, Ruiheng, Lidgey, F.J. and Hayatleh, K. (2008) Design of differential amplifier with negative impedance compensation. In: 2008 4th International Conference on Circuits and Systems for Communications. Institute of Electrical and Electronics Engineers, New York, pp. 589-593. ISBN 9781424417070 (doi:10.1109/ICCSC.2008.131)

Wu, Ruiheng and Wang, Chen (2008) Stability analysis of the amplifier with negative impedance compensation. In: 2008 51st Midwest Symposium on Circuits and Systems. Institute of Electrical and Electronics Engineers, New York, pp. 803-806. ISBN 9781424421664

amplify and forward

analysis and design methods

Alani, Amir M. and Aboutalebi, Morteza (2012) Analysis of the subgrade stiffness effect on the behaviour of ground-supported concrete slabs. Structural Concrete, 13 (2). pp. 102-108. ISSN 1464-4177 (doi:10.1002/suco.201100043)

analytical results

Chen, Yifan and Rapajic, Predrag (2008) Ultra-wideband cognitive interrogator network for indoor location tracking. Part 1: system architecture and network performance analysis. In: 2008 IEEE 19th International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-5. ISBN 9781424426447 (doi:10.1109/PIMRC.2008.4699464)

and emulation

anisotropic elasticity

Chen, Hua Peng, Guo, Z. and Zhou, X. (2012) Stress singularities of contact problems with a frictional interface in anisotropic bimaterials. Fatigue & Fracture of Engineering Materials & Structures. ISSN 1460-2695 (In Press) (doi:10.1111/j.1460-2695.2011.01642.x)

annular shear cell

Bradley, Michael S.A. and Berry, Rob (2007) Investigation of the effect of test procedure factors on the failure loci and derived failure functions obtained from annular shear cells. Powder Technology, 174 (1-2). pp. 60-63. ISSN 0032-5910 (doi:10.1016/j.powtec.2006.10.023)

annular wall friction tester

Bradley, Michael S.A., Berry, Rob, Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction tester and test procedure, suitable for equipment design and powder characterisation. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)

antenna

Anang, K.A., Rapajic, P.B., Eneh, T.I. and Oletu, G. (2011) Sensitivity of information capacity of land mobile cellular system to the base station antenna height at higher microwave frequencies. In: Computer Research and Development (ICCRD), 2011 3rd International Conference on. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 167-172. ISBN 978-1-61284-839-6 (doi:10.1109/ICCRD.2011.5764271)

antenna array

Teo, Jianqi, Chen, Yifan, Soh, Cheong Boon, Gunawan, E., Low, Kay Soon, Putti, T.C. and Wang, Shih-Chang (2010) Breast lesion classification using ultrawideband early time breast lesion response. IEEE Transactions on Antennas and Propagation, 58 (8). pp. 2604-2613. ISSN 0018 926X (doi:10.1109/TAP.2010.2050423)

antenna feeds

Callaghan, Peter, Gomes, Nathan J., Batchelor, John C. and Formont, Stephane (2009) Experimental investigation of an optically fed phase array for UWB personal area networks. In: International Topical Meeting on Microwave Photonics, 2009. MWP '09. Universidad Politécnica de Valencia, Valencia, Spain. ISBN 978-1-4244-4788-6

antenna measurements

Chen, Yifan, Teo, Jianqi, Lai, Joshua, Gunawan, Erry, Low, Kaysoon, Soh, Cheongboon and Rapajic, Predrag (2008) Cooperative UWB body area networking: channel measurement and diversity analysis. In: 2008 IEEE 10th International symposium on spread spectrum techniques and applications. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc, Piscataway, NJ, USA, pp. 303-308. ISBN 9781424422036 (doi:10.1109/ISSSTA.2008.61)

antenna systems

Chen, Yifan, Yuen, Chau, Zhang, Yan and Zhang, Zhenrong (2007) Diversity gains of generalised distributed antenna systems with cooperative users. In: 2007 IEEE Wireless Communications & Networking Conference. IEEE Explore, Piscataway, NJ, USA, pp. 797-802. ISBN 1424406587 (doi:10.1109/WCNC.2007.152)

anti-segmentation system

Dyroy, Are (2006) Quantification and mitigation of segregation in the handling of alumina in aluminium production. PhD thesis, University of Greenwich.

AODV

Bello, Lawal, Bakalis, Panos, Manam, Samuel J., Eneh, Titus and Anang, Kwashie A. (2011) Power control and performance comparison of AODV and DSR ad hoc routing protocols. In: Proceedings 2011 UKSim 13th International Conference on Modelling and Simulation (UkSim 2011). IEEE Conference Publications, 1 . Institute of Electrical and Electronics Engineers (IEEE) , Los Alamitos, Caifornia and Washington, US. Tokyo, Japan, pp. 457-460. ISBN 978-0-7695-4376-5 (doi:10.1109/UKSIM.2011.93)

Bello, Lawal, Bakalis, Panos, Manam, Samuel John and Eneh, Titus (2011) Performance optimisation of mobile ad hoc reactive routing protocols. Advanced Materials Research, 367 . pp. 249-254. ISSN 1662-8985 (Print), 1022-6680 (Online) (doi:10.4028/www.scientific.net/AMR.367.249)

applied load

Li, Chun and Yang, Shangtong (2011) Prediction of concrete crack width under combined reinforcement corrosion and applied load. Journal of Engineering Mechanics, 137. pp. 722-731. ISSN 0733-9399 (print), 1943-7889 (online) (doi:10.1061/(ASCE)EM.1943-7889.0000289)

aqueous solutions

Dobson, R., Wu, R. and Callaghan, P. (2012) Blood glucose monitoring using microwave cavity perturbation. Electronics Letters, 48 (15). pp. 905-906. ISSN 0013-5194 (doi:10.1049/el.2012.1811)

area measurement

Arge Bam

Motamed, J. and Alani, A.M. (2011) Proposal for the retrofit of the world heritage site of Arge Bam after earthquake damage. In: Concrete Solutions 2011. CRC Press/Balkema / Taylor & Francis Group, London, UK, pp. 95-100. ISBN 978-0-415-61622-5 (hbk), 9780203134689 (ebk)

artefacts

artificial neural network

Tao, Mei and Seals, R.C. (1993) Multicomponent gas-mixture measurements using an array of gas sensors and an artificial neural-network. Journal of Microcomputer Applications, 16 (2). pp. 203-210. (doi:10.1006/jmca.1993.1018)

AS-System

Dyroy, Are (2006) Quantification and mitigation of segregation in the handling of alumina in aluminium production. PhD thesis, University of Greenwich.

assembly

Durairaj, Rajkumar (2006) Rheological characterisation of solder pastes and isotropic conductive adhesives (ICAs) for microsystems assembly technology. PhD thesis, University of Greenwich.

assembly lines

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2007) Effect of abandon time on print quality and rheological characteristics for lead-free solder pastes used for flip-chip assembly. In: 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. Ieee/Cpmt International Electronics Manufacturing Technology Symposium . Institute of Electrical and Electronics Engineers , New York, USA, pp. 14-19. ISBN 9781424413355 (doi:10.1109/IEMT.2007.4417048)

assessment

Chen, Hua-Peng, Stevenson, Morris and Li, Chun-Qing (2008) Assessment of existing soakaways for reuse. Proceedings of the Institution of Civil Engineers-Water Management, 161 (3). pp. 141-149. ISSN 1741-7589 (doi:10.1680/wama.2008.161.3.141)

associated data

asynchronous transmission

attenuation

Durairaj, Rajkumar, Mallik, Sabuj, Seman, Anton, Marks, Antony and Ekere, Ndy (2008) Investigation of wall-slip effect on paste release characteristic in flip-chip stencil printing process. In: 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1328-1333. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763615)

Mallik, Sabuj, Schmidt, M., Bauer, R. and Ekere, Ndy (2008) Influence of solder paste components on rheological behaviour. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, USA, pp. 1135-1140. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684512)

Marks, A.E., Mallik, S., Ekere, N.N. and Seman, A. (2008) Effect of temperature on slumping behaviour of lead-free solder paste and its rheological simulation. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 829-832. ISBN 97814244-28137 (Print), 978-1-4244-2814-4 (Electronic) (doi:10.1109/ESTC.2008.4684459)

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) Development of an in-situ, non-destructive ultrasonic monitoring technique for solder pastes. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 209-214. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684351)

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) In-situ non-destructive ultrasonic rheology technique for monitoring different lead-free solder pastes for surface mount applications. In: 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1448-1454. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763635)

attenuation and fading limit

Al Mamun, Kazi Md. Abdullah and Zaman, Nafis Imtiaz (2010) Cooperative diversity performance of SISO relaying channel for mobile networks. In: Ninth International Symposium on Distributed Computing and Applications to Business Engineering and Science (DCABES), 2010. International Symposium on Distributed Computing and Applications to Business Engineering and Science . IEEE Xplore Digital Library, Piscataway, NJ, USA, pp. 249-253. ISBN 978-1-4244-7539-1 (doi:10.1109/DCABES.2010.57)

auger chemical analysis

Takyi, G. and Ekere, N.N. (2010) Investigation of the effect of nitrogen and air atmospheres on solder wettability of plasma-treated HASL finish PCBs. Soldering and Surface Mount Technology, 22 (3). pp. 17-21. ISSN 0954 0911 (doi:10.1108/09540911011054154)

authenticated encryption

authentication systems

Ma, Mingchao (2007) Distributed RBAC for subscription-based remote network services. PhD thesis, University of Greenwich.

authentication-delegation

Woodhead, Steve and Ma, Mingchao (2006) Authentication delegation for subscription-based remote network services. Computers and Security, 25 (5). pp. 371-378. ISSN 0167-4048 (doi:10.1016/j.cose.2006.03.006)

authorisation

automatic access control

Rapajic, Predrag, Kabir, Ahsanul, Huang, Kao-Cheng and Wu, Ruiheng (2007) Next generation identity card: RFID-based automatic access control system for universities. In: Selected Topics on Circuits, Systems, Electronics, Control & Signal Processing: Proceedings of the 6th WSEAS International Conference on Circuits, Systems, Electronics, Control & Signal Processing. Electrical and Computer Engineering . WSEAS Press, Singapore, pp. 480-483. ISBN 9789606766282

automatic control

Woodhead, Stephen Robert (1992) The measurement of particle velocity and suspension density in pneumatic coal injection systems. PhD thesis, University of Greenwich.

automotive

Otiaba, K.C., Ekere, N.N., Bhatti, R.S., Mallik, S., Alam, M.O. and Amalu, E.H. (2011) Thermal interface materials for automotive electronic control unit: Trends, technology and R&D challenges. Microelectronics Reliability, 51 (12). pp. 2031-2043. ISSN 0026-2714 (doi:10.1016/j.microrel.2011.05.001)

automotive applications

Otiaba, K.C., Bhatti, R.S., Ekere, N.N., Mallik, S., Amalu, E.H. and Ekpu, M. (2011) Thermal effects of die-attach voids location and style on performance of chip level package. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 231-236. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145176)

automotive engineering

Grau, I., Skarvelis-Kazakos, S., Papadopoulos, P., Cipcigan, L.M. and Jenkins, N. (2010) Electric vehicles support for intentional islanding: A prediction for 2030. In: 41st North American Power Symposium. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 1-5. ISBN 978-1-4244-4428-1 (Print), 978-1-4244-4429-8 (Online) (doi:10.1109/NAPS.2009.5484016)

automotive product development

Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.

Zhang, Pengcheng, Gao, James and Wang, Yinglin (2011) Requirement driven knowledge management system design to support automotive product development. International Journal of Product Lifecycle Management (IJPLM), 5 (2-4). pp. 202-223. ISSN 1743-5110 (doi:10.1504/IJPLM.2011.043188)

auxetic materials

Javadi, Akbar A., Faramarzi, Asaad and Farmanai, Raziyeh (2012) Design and optimization of microstructure of auxetic materials. Engineering Computations, 29 (3). pp. 260-276. ISSN 0264-4401 (doi:10.1108/02644401211212398)

AWGN

Zaman, Nafis Imtiaz, Al Mamun, Kazi M.D. Amullah, Uddin, Abu Moen Mohammad Salah and Kanakis, Triantafyllos (2010) Performance analysis of MIMO relaying channels'cooperative diversity for mobile networks. In: Proceedings - 2nd International Symposium on Data, Privacy, and E-Commerce, ISDPE 2010. IEEE Computer Society, Piscataway, USA, pp. 95-99. ISBN 9781424483778 (Print), 9780769542034 (Online) (doi:10.1109/ISDPE.2010.28)

AWGN channel

Oletu, G. and Rapajic, P. (2011) The performance of turbo codes for wireless communication systems. In: ICCRD2011 - 2011 3rd International Conference on Computer Research and Development. IEEE Computer Society, Piscataway, USA, pp. 346-349. ISBN 9781612848396 (doi:10.1109/ICCRD.2011.5763919)

axiomatic design

Gao, James, Fei, Genyuan and Tang, X.Q. (2009) A TRIZ based methodology for the analysis of the coupling problems in complex engineering design. In: Proceedings of the 19th CIRP Design Conference – Competitive Design, 30-31 March 2009. Cranfield University Press, Cranfield University, pp. 285-292. ISBN 9780955743641

axisymmetrical displacement constraint

Chen, Hua Peng and Xiao, Nan (2012) Analytical solutions for corrosion-induced cohesive concrete cracking. Journal of Applied Mathematics, 25. pp. 2-25. ISSN 1110-757X (doi:10.1155/2012/769132)

backscatter breast response

BAE systems

Piorkowski, B.A., Evans, R.D. and Gao, J.X. (2011) Development of a face-to-face meeting capture and indexing process. In: Proceedings of the 2011 15th International Conference on Computer Supported Cooperative Work in Design, CSCWD2011. IEEE Computer Society, Piscataway, NJ, USA, pp. 4-8. ISBN 9781457703867 (doi:10.1109/CSCWD.2011.5960047)

Baker River

Dussaillant, A., Buytaert, W., Meier, C. and Espinoza, F. (2012) Hydrological regime of remote catchments with extreme gradients under accelerated change: the Baker basin in Patagonia. Hydrological Sciences Journal, 57 (8). pp. 1530-1542. ISSN 0262-6667 (doi:10.1080/02626667.2012.726993)

Bam

Motamed, Jubin (2005) The Bam earthquake of 26 December 2003, Iran. Other. Institution of Structural Engineers / Earthquake Engineering Field Investigation Team (EEFIT) [website], London, UK.

bandwidth utilization

Zhang, Yan, Chen, Yifan, He, Jianhua, Wang, Cheng-Xiang and Vasilakos, Athanasios V. (2009) Call admission control algorithms in OFDM-based wireless multiservice networks. Wireless Personal Communications, 50 (1). pp. 99-114. ISSN 0929-6212 (Print), 1572-834X (Online) (doi:10.1007/s11277-008-9540-z)

banks in Jordan

AL-Shawabkeh, Abdallah and Tambyrajah, Antony (2009) Knowledge management in Jordanian banks. International Journal of Knowledge, Culture and Change Management, 9 (9). pp. 105-124. ISSN 1447-9524

batteries

battery charging

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Awad, B., Cipcigan, L.M. and Jenkins, N. (2010) Impact of residential charging of electric vehicles on distribution networks, a probabilistic approach. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2012) Electric vehicles' impact on British distribution networks. IET Electrical Systems in Transportation, 2 (3). pp. 91-102. ISSN 2042-9738 (doi:10.1049/iet-est.2011.0023)

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2011) Predicting Electric Vehicle impacts on residential distribution networks with distributed generation. In: 2010 IEEE Vehicle Power and Propulsion Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-8220-7 (doi:10.1109/VPPC.2010.5729009)

battery powered vehicles

beams

Melchers, Robert E., Li, Chun-Qing and Lawanwisut, Wimon (2008) Probabilistic modeling of structural deterioration of reinforced concrete beams under saline environment corrosion. Structural Safety, 30 (5). pp. 447-460. ISSN 0167-4730 (doi:10.1016/j.strusafe.2007.02.002)

behaviour design and construction

bend erosion

Macchini, R., Bradley, M.S.A. and Deng, T. (2013) Influence of particle size, density, particle concentration on bend erosive wear in pneumatic conveyors. Wear, 303 (1-2). pp. 21-29. ISSN 0043-1648 (doi:10.1016/j.wear.2013.02.014)

bending

benign lesion

bilinear softening curve

Chen, Hua Peng and Xiao, Nan (2012) Analytical solutions for corrosion-induced cohesive concrete cracking. Journal of Applied Mathematics, 25. pp. 2-25. ISSN 1110-757X (doi:10.1155/2012/769132)

binary mixtures

Salter, G.F., Farnish, R.J., Bradley, M.S.A. and Burnett, A.J. (2000) Segregation of binary mixtures of particles during the filling of a two-dimensional representation of a hopper. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 214 (3). pp. 197-208. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/0954408001530056)

binder

Shehu, T. and Bhatti, R.S. (2012) The use of Yam flour (starch) as binder for sand mould production in Nigeria. World Applied Sciences Journal, 16 (6). pp. 858-862. ISSN 1818-495 (doi:wasj/wasj16(6)12/14.pdf)

bio-powder

biodeterioration testing laboratories

Burnett, Anthony John (1996) The use of laboratory erosion tests for the prediction of wear in pneumatic conveyor bends. PhD thesis, University of Greenwich.

biodeterioration testing manufacturing processes

Burnett, Anthony John (1996) The use of laboratory erosion tests for the prediction of wear in pneumatic conveyor bends. PhD thesis, University of Greenwich.

bioenergy

Deng, T., Su, J.W., Zhang, Y., Bradley, M.S.A. and Wei, X.L. (2011) Making coal/biomass pellets for co-firing - a review and pioneer work. In: Proceedings of the Bioten Conference on Biomass Bioenergy and Biofuels 2010. CPL Press, Newbury, UK. ISBN 9781872691541

biological system modeling

biomass

Owonikoko, A., Berry, R.J. and Bradley, M.S.A. (2010) Characterisation of extreme shape materials: “biomass and waste materials”. In: Bulk Solids Europe 2010 Conference and IMechE Symposium in New Frontiers in Bulk Materials Handling , 9-10 September 2010, Glasgow. (Submitted)

Shao, Jiaqing, Krabicka, Jan and Yan, Yong (2010) Velocity measurement of pneumatically conveyed particles using intrusive electrostatic sensors. IEEE Transactions on Instrumentation and Measurement, 59 (5). 1477 -1484. ISSN 0018-9456 (doi:10.1109/TIM.2010.2040960)

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2009) Micro-generation for 2050: emissions performances of micro-generation sources during operation. Pollack Periodica, 4 (2). pp. 89-99. ISSN 1788-1994 (Print), 1788-3911 (Online) (doi:10.1556/Pollack.4.2009.2.9)

biomass co-firing

biomass mixes

Khan, Naushad Salim (2008) Handling characteristics of coal/biomass mixes: measurements and establishing benchmarks. PhD thesis, University of Greenwich.

biomass pelletization

bipolar charge

Hussain, Tariq, Kaialy, Waseem, Deng, Tong, Bradley, Mike S.A., Nokhodchi, Ali and Armour-Chélu, David (2013) Measurement of electrostatic charge on particles using a novel approach. International Journal of Pharmaceutics, 441 (1-2). pp. 781-789. ISSN 0378-5173 (doi:10.1016/j.ijpharm.2012.10.002)

bit error rate

Oletu, Grace, Rapajic, Predrag, Anang, Kwashie, Wu, Ruiheng and Eneh, Titus (2012) The smearing filter design techniques for data transmission. In: 2012 IEEE Vehicular Technology Conference (VTC Fall) Proceedings. IEEE Conference Publications . Institution of Electrical and Electonic Engineers, Inc., Piscataway, NJ, USA. ISBN 978-1-4673-1881-5 ISSN 1090-3038 (doi:10.1109/VTCFall.2012.6398948)

bit error rate (BER)

bit error rate performance

blending

block diagonalization

Morato, M., Chen, Yifan, Yuen, Chau and Lei, Zhongding (2011) Decentralized block diagonalization algorithms for distributed MIMO systems. In: International Symposium on Wireless and Pervasive Computing, ISWPC 2011. IEEE Computer Society, Piscataway, USA, pp. 1-5. ISBN 9781424498680 (Print), 9781424498673 (Online) (doi:10.1109/ISWPC.2011.5751334)

blood glucose levels

Dobson, R., Wu, R. and Callaghan, P. (2012) Blood glucose monitoring using microwave cavity perturbation. Electronics Letters, 48 (15). pp. 905-906. ISSN 0013-5194 (doi:10.1049/el.2012.1811)

blood glucose monitoring

Dobson, R., Wu, R. and Callaghan, P. (2012) Blood glucose monitoring using microwave cavity perturbation. Electronics Letters, 48 (15). pp. 905-906. ISSN 0013-5194 (doi:10.1049/el.2012.1811)

board configuration

Koufopoulos, Dimitrios N., Coutroubis, Alec and Lagoudis, Ioannis N. (2007) One size does not fit all: revisiting conceptual wisdom by assessing corporate governance practices of the Greek shipping management companies. In: International Association of Maritime Economists, IAME, Greece Challenges and Trends in Shipping, Markets, Investments and Policies, 4-6 July 2007, Athens. (Unpublished)

board of directors

body area network

Chen, Yifan, Teo, Jianqi, Lai, Joshua Chong Yue, Gunawan, Erry, Low, Kay Soon, Soh, Cheong Boon and Rapajic, Predrag B. (2009) Cooperative communications in ultra-wideband wireless body area networks: channel modeling and system diversity analysis. IEEE Journal on Selected Areas in Communications, 27 (1). pp. 5-16. ISSN 0733-8716 (doi:10.1109/JSAC.2009.090102)

body sensor networks

bond strength

Masroor, Ahmad (1983) Bond strength history in prestressed concrete reactor vessels. PhD thesis, Thames Polytechnic.

borosilicate glass

Mayur, Yaul, Bhatti, Rajinderpal and Lawrence, Stephen (2008) Evaluating the process of borosilicate glass capillaries used for fabrication of in-vitro fertilization (IVF) micro-pipettes. Biomedical Microdevices, 10 (1). pp. 123-128. ISSN 1387-2176 (doi:10.1007/s10544-007-9117-8)

breakage matrices

Deng, Tong, Farnish, Richard J. and Bradley, Michael S.A. (2008) Evaluation of particle degradation due to high-speed impacts in a pneumatic handling system. Particulate Science and Technology, 26 (5). pp. 438-450. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:10.1080/02726350802367522)

breaking point distance

Bello, Lawal, Anang, Kwashie A., Bakalis, Panos, Rapajic, Predrag B. and Eneh, Titus I. (2012) Sensitivity of DSR protocol performance to propagation loss models at higher microwave frequencies. In: 2012 Proceedings 14th International Conference on Modelling and Simulation (UKSim). IEEE Conference Publications . The Institute of Electrical and Electronics Engineers, Inc, California & Washington, USA and Tokyo, Japan, pp. 561-565. ISBN 978-0-7695-4682-7 (doi:10.1109/UKSim.2012.85)

breakingpoint distance

breakpoint distance

Anang, K.A., Rapajic, P.B., Eneh, T.I., Bello, L. and Oletu, G. (2012) Impact of vehicular traffic on information capacity of cellular wireless network at carrier frequencies greater than 3 GHz. In: 2011 Fifth UKSim European Symposium on Computer Modeling and Simulation (EMS). Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 430-434. ISBN 978-1-4673-0060-5 (doi:10.1109/EMS.2011.19)

Anang, Kwashie A., Bello, Lawal, Eneh, Titus I., Bakalis, Panos and Rapajic, Predrag B. (2012) The performance of Dynamic Source Routing protocol to path loss models at carrier frequencies above 2 GHz. In: 2011 IEEE 13th International Conference on Communication Technology (ICCT). Institute of Electronic and Electrical Engineers, Inc., Piscataway, NJ, USA, pp. 151-155. ISBN 978-1-61284-306-3 (print) (doi:10.1109/ICCT.2011.6157852)

breast

Kosmas, P., Laranjeira, S., Dixon, J.H., Li, X. and Chen, Y. (2010) Time reversal microwave breast imaging for contrast-enhanced tumor classification. In: Engineering in Medicine and Biology Society (EMBC), 2010 Annual International Conference of the IEEE. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 708-711. ISBN 978-1-4244-4123-5 (print) ISSN 1557-170X (online) (doi:10.1109/IEMBS.2010.5626158)

breast cancer detection

Chen, Yifan, Gunawan, Erry, Low, Kay Soon, Wang, Shih-Chang, Soh, Cheong Boon and Putti, Thomas Choudary (2008) Time-reversal ultrawideband breast imaging: pulse design criteria considering multiple tumors with unknown tissue properties. IEEE Transactions on Antennas and Propagation, 56 (9). pp. 3073-3077. ISSN 0018-926X (doi:10.1109/TAP.2008.928811)

Ogunlade, O., Chen, Yifan and Kosmas, P. (2010) Measurement of the complex permittivity of microbubbles using a cavity perturbation technique for contrast enhanced ultra-wideband breast cancer detection. In: 2010 Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC'10. IEEE Computer Society, Piscataway, USA, 6733-6736 . ISBN 978424441235 (doi:0.1109/IEMBS.2010.5626016 )

Teo, Jianqi, Chen, Yifan, Soh, Cheong Boon, Gunawan, Erry, Low, Kay Soon, Putti, Thomas Choudary and Wang, Shih-Chang (2010) An overview of radar based ultra wideband breast cancer detection algorithms. International Journal of Ultra Wideband Communications and Systems, 1 (4). pp. 273-281. ISSN 1758-728X (Print), 1758-7298 (Online) (doi:10.1504/IJUWBCS.2010.034308)

breast imaging

Chen, Yifan, Craddock, I.J., Kosmas, P., Ghavami, M. and Rapajic, P. (2010) Multiple-input multiple-output radar for lesion classification in ultrawideband breast imaging. IEEE Journal of Selected Topics in Signal Processing, 4 (1). pp. 187-201. ISSN 1932-4553 (doi:10.1109/JSTSP.2009.2038975)

breast lesion

breast lesions

bridge health assessment

Kilic, Gokhan (2012) Application of advanced non-destructive testing methods on bridge health assessment and analysis. PhD thesis, University of Greenwich.

bridges

Kilic, Gokhan (2012) Application of advanced non-destructive testing methods on bridge health assessment and analysis. PhD thesis, University of Greenwich.

broadband antennas

bubbles

building envelopes

Xiao, Nan, Chen, Hua Peng, Sun, Liqiang and Wang, Xiang (2011) Experimental study on thermal performance of improved open-web roofs with induced ventilation. In: 2011 International Conference on Multimedia Technology, ICMT 2011. IEEE Computer Society, Piscataway, USA, 6398 -6401. ISBN 9781612847719 (doi:10.1109/ICMT.2011.6002740)

building roof

buildings

Chen, Hua-Peng and Bicanic, Nenad (2010) Identification of structural damage in buildings using iterative procedure and regularisation method. Engineering Computations, 27 (8). pp. 930-950. ISSN 0264-4401 (doi:10.1108/02644401011082962)

bulk modulus

bulk particulates

Ariza-Zafra, K., Berry, Rob and Bradley, Michael S.A. (2008) Review of models for predicting the discharge rates of bulk particulates from silos and bins. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 484-492. ISBN 9788272062896

Farnish, Richard J., Kulkarni, Prasanna and Bradley, Michael S.A. (2008) Segregation of bulk particulates through multiple process handling steps. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 505-510. ISBN 9788272062896

bulk properties

Jones, Mark G. (1988) The influence of bulk particulate properties on pneumatic conveying performance. PhD thesis, Thames Polytechnic.

bulk solids

Bradley, Michael S.A., Farnish, Richard J., Reed, Alan R. and Kulkarni, Prasanna (2007) Evaluation of air induced segregation tendencies in pharmaceutical blends using a bench scale tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)

Bradley, Michael S.A., Reed, Alan R., Berry, Rob and Holmes, C.P.M. (2008) Start-up and running forces on bulk solids feeders: experimental findings versus available models. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 450-457. ISBN 9788272062896

bulk solids handling

Berry, Rob, Bradley, Michael S.A., Farnish, Richard J. and Angulo Pinzon, O.A. (2008) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 344-350. ISBN 9788272062896

Bradley, Michael S.A., Berry, Rob, Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia. (Unpublished)

bulk solids transport

Woodcock, C. R. (1978) The flow of particulate bulk solids in an air-assisted gravity conveyor. PhD thesis, Thames Polytechnic.

burial depth

Aboutalebi, M., Banan, M.R. and Banan, M.R. (2010) Parametric study on the effect of burial depth on the surface explosion resistance of cylindrical concrete oil tanks. International Journal of Physical Sciences, 5 (1). 030-038. ISSN 1992-1950

business improvement methods

Berkhauer-Smith, Samantha (2009) The integration of lean thinking and manufacturing business improvement methods within the aerospace supply chain. PhD thesis, University of Greenwich.

business performance

business process

Gao, James and Bradfield, Daniel J. (2007) A methodology to facilitate knowledge sharing in the new product development process. International Journal of Production Research, 45 (7). pp. 1489-1504. ISSN 0020-7543 (doi:10.1080/00207540600942227)

CAD

Eadie, R. and Gao, James (2008) An industrial implementation of a methodology for the optimisation of product design tolerances. In: Advances in manufacturing technology XXII: the proceedings of the 6th International Conference on Manufacturing Research ICMR08, 9th-11th September 2008, London UK. Brunel University College, Brunel University, pp. 161-170. ISBN 9781902316604

caking

Leaper, M.C., Bradley, Michael S.A., Cleaver, J.A.S., Bridle, Ian, Reed, Alan R., Abou-Chakra, H. and Tüzün, Ugur (2002) Constructing an engineering model for moisture migration in bulk solids as a prelude to predicting moisture migration caking. Advanced Powder Technology, 13 (4). pp. 411-424. (doi:10.1163/156855202320536043)

call admission control

call blocking probability

cancer

cancer detection

Canton Tower benchmark problem

Chen, Hua-Peng and Huang, Tian-Li (2012) Updating finite element model using dynamic perturbation method and regularization algorithm. Smart Structures and Systems, 10 (4). pp. 427-442. ISSN 1738-1584

capacitance

capacity

capacity lower bounds

Rapajic, Predrag, Liu, Yang, Kennedy, Rodney A. and Sadeghi, Parastoo (2008) Pilot symbol transmission for time-varying fading channels: an information-theoretic optimization. In: Proceedings of the 1st International Conference on Signal Processing and Telecommunication Systems ICSPCS'2007 Australia, Gold Coast December 17-19, 2007. DSP for Communication Systems, Tarrawanna, New South Wales, Australia, pp. 34-42. ISBN 9780975693445

capacity optimizations

Kanakis, Triantafyllos and Rapajic, Predrag B. (2008) Radio propagation modeling for capacity optimization in wireless relay MIMO systems with partial CSI. In: 2008 IEEE 10th International symposium on spread spectrum techniques and applications. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 211-215. ISBN 9781424422036 (doi:10.1109/ISSSTA.2008.44)

capacity performance

CAPP

Mwinkuka, T., Hinduja, S. and Owodunni, Oladele (2007) Extendible operation sequencing for turn-milled components. CIRP Annals - Manufacturing Technology, 56 (1). pp. 473-478. ISSN 0007-8506 (doi:10.10.1016/j.cirp.2007.05.113)

carbon dioxide

carbon emission

Skarvelis-Kazakos, Spyros, Papadopoulos, Panagiotis, Grau, Iñaki, Gerber, Annelies, Cipcigan, Liana M., Jenkins, Nick and Carradore, Loredana (2010) Carbon optimized virtual power plant with electric vehicles. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, . ISBN 978-1-4244-7667-1

carbon emissions

carbon footprint

carbon nanofibres (CNFs)

Otiaba, K.C., Ekere, N.N., Bhatti, R.S., Mallik, S. and Amalu, E.H. (2011) Emerging nanotechnology-based thermal interface materials for automotive electronic control unit application. In: Microelectronics and Packaging. Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ, USA, pp. 1-8. ISBN 978-1-4673-0694-2 (print)

carbon nanotubes (CNTs)

carbon optimized virtual power plant

carbon steel

Burnett, A.J., Bradley, M.S.A., O'Flynn, D.J., Deng, T. and Bingley, M. (1999) Anomalies in the results obtained from rotating disc accelerator erosion testers: a discussion of possible causes. Wear, 233-5. pp. 275-283. ISSN 0043-1648 (doi:10.1016/s0043-1648(99)00227-6)

carrier frequency offset (CFO)

Yang, Feng, Zhang, Zhenrong and Chen, Yifan (2009) Maximum-likelihood estimator for coarse carrier frequency offset estimation in OFDM systems. Wireless Personal Communications, 49 (1). pp. 55-66. ISSN 0929-6212 (Print), 1572-834X (Online) (doi:10.1007/s11277-008-9555-5)

case study

Saur-Amaral, Irina and Kofinas, Alexander (2010) Multidisciplinary collaborations in pharmaceutical innovation: a two case-study comparison. Journal of Business Chemistry, 7 (3). pp. 131-154. ISSN 1613-9615

catchment classification

cavity perturbation technique

CBR

Bakalis, Panos and Lawal, Bello (2010) Performance evaluation of CBR and TCP traffic models on MANET using DSR routing protocol. In: 2010 International Conference on Communications and Mobile Computing. IEEE Computer Society, Los Alamitos, CA, USA, pp. 318-322. ISBN 9780769539898 (doi:10.1109/CMC.2010.185)

CDMA networks

CDMA wireless networks

cellular beams

Goodfellow, N., Nadjai, A., Tee, Kong-Fah, Ali, F. and Choi, S.K (2009) Fire composite floor cellular steel beams for buildings. In: The International Conference on Applications of Structural Fire Engineering, 19-20 February 19-20 2009, Prague, Czech Republic.

Nadjai, Ali, Goodfellow, Nathan, Tee, Kong-Fah, Ali , Faris and Choi, Sengkwan (2010) Analysis of composite floor cellular steel beams. Journal of Structural Fire Engineering. pp. 161-175. ISSN 2040-2317 (Submitted) (doi:10.1260/2040-2317.1.3.161)

cellular phone intention estimation

Melis, W.J.C., Chizuwa, S. and Kameyama, M. (2010) Evaluation of herarchical temporal memory for a real world application. In: Innovative Computing, Information and Control (ICICIC), 2009 Fourth International Conference on. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 144-147. ISBN 978-1-4244-5543-0 (doi:10.1109/ICICIC.2009.195)

cellular wireless

Anang, K.A., Rapajic, P.B., Wu, R., Bello, L. and Eneh, T.I. (2012) Cellular system information capacity change at higher frequencies due to propagation loss and system parameters. Progress In Electromagnetics Research B, 44. pp. 191-221. ISSN 1937-6472 (doi:10.2528/PIERB12080908)

cement paste

cement-based materials

central vertical bar

Motamed, Jubin and Al-Hussaini, Abbas (2009) Influence of central vertical bar on the behaviour of high strength concrete transfer beam-column joints. In: The Third International Conference on Concrete and Development. Building and Housing Research Center, Tehran, Iran, pp. 485-496. (doi:CD02-026)

centrifugal force

centrifugal tester

Deng, Tong, Bingley, Mark S. and Bradley, Mike S.A. (2009) Understanding particle dynamics in erosion testers: a review of influences of particle movement on erosion test conditions. Wear, 267 (11). pp. 2132-2140. ISSN 0043-1648 (doi:10.1016/j.wear.2009.02.020)

centrifugal-accelerator erosion tester

Deng, T., Bingley, M.S., Bradley, M.S.A. and De Silva, S.R. (2008) A comparison of the gas-blast and centrifugal-accelerator erosion testers: the influence of particle dynamics. Wear, 265 (7-8). pp. 945-955. ISSN 0043-1648 (doi:10.1016/j.wear.2008.02.017)

centripetal effect accelerator

centripetal effect accelerator erosion tester

Burnett, A.J., Desilva, S.R. and Reed, Alan R. (1995) Comparisons between “sand blast” and “centripetal effect accelerator” type erosion testers. Wear, 186-187 (1). pp. 168-178. ISSN 0043-1648 (doi:10.1016/0043-1648(95)07143-1)

CFD

Jones, Mark G. (1988) The influence of bulk particulate properties on pneumatic conveying performance. PhD thesis, Thames Polytechnic.

change management

Fei, Genyuan (2011) A methodology for engineering design change analysis using system modelling and knowledge management technologies. PhD thesis, University of Greenwich.

Fei, Genyuan, Gao, James, Owodunni, Oladele and Tang, X. Q. (2009) A methodology for engineering design change management using modelling and problem solving techniques. In: Proceedings of the 36th International MATADOR Conference. Springer, US, pp. 179-182. ISBN 978-1-84996-432-6_41 (doi:10.1007/978-1-84996-432-6_41)

Fei, Genyuan, Gao, James, Owodunni, Oladele and Tang, Xiaoqing (2011) A method for engineering design change analysis using system modelling and knowledge management techniques. International Journal of Computer Integrated Manufacturing, 24 (6). pp. 535-551. ISSN 1362-3052 (electronic), 0951-192X (paper) (doi:10.1080/0951192X.2011.562544)

channel capacity

Lamahewa, Tharaka A., Sadeghi, Parastoo, Kennedy, Rodney A. and Rapajic, Predrag B. (2009) Model-based pilot and data power adaptation in psam with periodic delayed feedback. IEEE Transactions on Wireless Communications, 8 (5). pp. 2247-2252. ISSN 1536-1276 (doi:10.1109/TWC.2009.080526)

Sadeghi, Parastoo and Rapajic, Predrag (2008) On information rates of time-varying fading channels modeled as finite-state Markov channels. IEEE Transactions on Communications, 56 (8). pp. 1268-1278. ISSN 0090-6778 (doi:10.1109/TCOMM.2008.060622)

channel conditions

channel estimation

Sadeghi, Parastoo, Kennedy, Rodney A., Rapajic, Pedrag B. and Shams, Ramtin (2008) Finite-state Markov modeling of fading channels: a survey of principles and applications. IEEE Signal Processing Magazine, 25 (5). pp. 57-80. ISSN 1053-5888 (doi:10.1109/MSP.2008.926683)

channel information

channel information capacity

Krusevac, Zarko B., Rapajic, Predrag and Kennedy, Rodney A. (2008) Mutual information performance of differential MPSK detection over time-varying channels. In: Proceedings - 2008 IEEE International Symposium on Information Theory, ISIT 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 2752-2756. ISBN 9781424422562

channel modeling

channel models

Hu, Luo-quan, Zhu, Hong-bo and Chen, Yifan (2009) Probability distribution of stochastic rays and its applications. Journal of Electronics & Information Technology, 31 (6). pp. 1405-1409. ISSN 1009-5896 (doi:10.3724/SP.J.1146.2007.01018)

charge in measurement

Woodhead, Steve and Armour-Chelu, David (2002) Comparison of the electric charging properties of particulate materials in gas–solids flows in pipelines. Journal of Electrostatics, 56 (1). pp. 87-101. ISSN 0304-3886 (doi:10.1016/S0304-3886(02)00032-3)

charging equipment

charging of particles

chemical vapour deposition (CVD)

chip scale package (CSP) technology

Otiaba, Kenny C., Bhatti, R.S., Ekere, N.N., Mallik, S., Alam, M.O., Amalu, E.H. and Ekpu, M. (2012) Numerical study on thermal impacts of different void patterns on performance of chip-scale packaged power device. Microelectronics Reliability, 52 (7). pp. 1409-1419. ISSN 0026-2714 (doi:10.1016/j.microrel.2012.01.015)

chip-scale packaged power device

chiral honeycomb

chloride

Li, Chun-Qing and Melchers , Robert E. (2009) Reinforcement corrosion initiation and activation times in concrete structures exposed to severe marine environments. Cement and Concrete Research, 39 (11). pp. 1068-1076. ISSN ISSN: 0008-8846 (doi:10.1016/j.cemconres.2009.07.003)

chloride attack

Li, Fumin, Yuan, Yingshu and Li, Chun-Qing (2011) Corrosion propagation of prestressing steel strands in concrete subject to chloride attack. Construction and Building Materials, 25 (10). pp. 3878-3885. ISSN 0950-0618 (doi:10.1016/j.conbuildmat.2011.04.011)

chlorides

Melchers, R.E. and Li, C.Q. (2009) Reinforcement corrosion in concrete exposed to the North Sea for more than 60 years. CORROSION : The Journal of Science and Engineering, 65 (8). pp. 554-566. ISSN 0010-9312 (print) (doi:10.5006/1.3319158)

choke-slot

Callaghan, P., Sagor, M.H. and Batchelor, J.C. (2011) Control of ground plane influence on antenna radiation pattern for mobile handheld devices. In: Antennas and Propagation Conference (LAPC). IEEE Xplore Digital Library, Loughborough, UK, pp. 1-4. ISBN 978-1-4577-1014-8 ISSN 978-1-4577-1015-5 (online) (doi:10.1109/LAPC.2011.6114127)

circuit breaker

Gandhi Jeyaraj, S. and Habtay, Yehdego (2011) Effective and efficient circuit breaker analysis. IET 2011 Conference on Reliability of Transmission and Distribution Networks (RTDN 2011). pp. 1-6. (doi:10.1049/cp.2011.0532)

circular random network (CRN)

Chen, Yifan and Rapajic, P. (2009) Novel channel description method for decentralized wireless relay networks. In: Microwave Conference 2009. Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ, USA, pp. 2164-2167. ISBN 978-1-4244-2802-1 (e-ISBN), 978-1-4244-2801-4 (print) (doi:10.1109/APMC.2009.5385513)

cleaning

Takyi, G. and Ekere, N.N. (2010) Study of the effects of PCB surface finish on plasma process time for lead-free wave soldering. Soldering & Surface Mount Technology, 22 (2). pp. 37-42. ISSN 0954-0911 (doi:10.1108/09540911011036271)

climate change

Dussaillant, Alejandro, Benito, Gerardo, Buytaert, Wouter, Carling, Paul, Meier, Claudio and Espinoza, Fabián (2010) Repeated glacial-lake outburst floods in Patagonia: An increasing hazard? Natural Hazards, 54 (2). pp. 469-481. ISSN 0921-030X (doi:10.1007/s11069-009-9479-8)

closed loop supply chains

Piorkowski, Barry, Gao, James and Evans, Richard (2011) A case-study: finding references to product development knowledge from analysis of face-to-face meetings. In: Glocalized Solutions for Sustainability in Manufacturing Proceedings of the 18th CIRP International Conference on Life Cycle Engineering. Springer, New York, USA, pp. 564-569. ISBN 978-3642196911 (doi:10.1007/978-3-642-19692-8-98)

cluster methods

Anang, K.A., Rapajic, P.B., Eneh, T.I. and Nijsure, Y. (2011) Minimum cell size for information capacity increase in cellular wireless network. In: Vehicular Technology Conference (VTC Spring), 2011 IEEE 73rd. Institute of Electrical and Electronic Engineers, Piscataway, NJ, USA. ISBN 978-1-4244-8332-7 ISSN 1550-2252 (doi:10.1109/VETECS.2011.5956350)

CMAC

Adekunle, A.A. and Woodhead, S.R. (2010) Zone based systems design framework for the realisation of efficient block cipher based message authentication code algorithms. In: 5th International Conference on Availability, Reliability, and Security, ARES 2010. IEEE Xplore Digital Library, Piscataway, NJ, USA, pp. 216-221. ISBN 978-1-4244-5879-0 (doi:10.1109/ARES.2010.109)

co-channel interference

co-operative base stations

co-operative diversity

coal

Aziza-Zafra, Karol (2010) A hat trick for coal handling. International Bulk Journal, 5. pp. 67-70. ISSN 0260-1087

Khan, Naushad Salim (2008) Handling characteristics of coal/biomass mixes: measurements and establishing benchmarks. PhD thesis, University of Greenwich.

Pillai, John (2009) Direct on-line measurement of wall friction of coal as an indicator of handleability. PhD thesis, University of Greenwich.

coal handling

Aziza-Zafra, Karol (2010) A hat trick for coal handling. International Bulk Journal, 5. pp. 67-70. ISSN 0260-1087

Bradley, Michael S.A., Berry, Rob and Pillai, John (2007) Comparison between the angles of wall friction measured on an on-line wall friction tester and the Jenike wall friction tester. Powder Technology, 174 (1-2). pp. 64-70. ISSN 0032-5910 (doi:10.1016/j.powtec.2006.10.024)

coal industry

Aziza-Zafra, Karol (2010) A hat trick for coal handling. International Bulk Journal, 5. pp. 67-70. ISSN 0260-1087

coal manufacturing

Woodhead, Stephen Robert (1992) The measurement of particle velocity and suspension density in pneumatic coal injection systems. PhD thesis, University of Greenwich.

coarse estimation

coastal lagoon

Dussaillant, Alejandro, Galdames, Pablo and Sun, Chi-Le (2009) Water level fluctuations at El Yali coastal lagoon Ramsar site, with emphasis on subsurface processes. Desalination, 246 (1-3). pp. 202-214. ISSN 0011-9164 (doi:10.1016/j.desal.2008.03.053)

coastal structures

Li, C.Q. and Zhao, J. M. (2010) Time dependent risk assessment of combined overtopping and structural failure for reinforced concrete coastal structures. Journal of Waterway, Port, Coastal, and Ocean Engineering, 136 (2). pp. 97-103. ISSN 0733-950X (print), 1943-5460 (online) (doi:10.1061/(ASCE)WW.1943-5460.0000031)

coating

coefficient of thermal expansion

cogeneration

cognitive intelligence

cognitive interrogator network (COIN)

Chen, Y. and Rapajic, P. (2010) Ultra-wideband cognitive interrogator network: Adaptive illumination with active sensors for target localisation. Communications, IET, 4 (5). pp. 573-584. ISSN 1751 8628 (doi:10.1049/iet-com.2009.0495)

cognitive interrogator-sensor networks (CISNs)

Chen, Yifan and Woo, Wai Lok (2010) On modeling of cognitive interrogator-sensor network: Layered discrete memoryless channel and finite-state Markov channel. In: 2nd International Workshop on Cognitive Information Processing (CIP), 2010. 2nd International Workshop on Cognitive Information Processing (CIP), 2010 . IEEE Xplore Digital Library, Elba, pp. 11-16. ISBN 978-1-4244-6457-9 (print) ISSN 2150 4938 (online) (doi:10.1109/CIP.2010.5604122)

cognitive radar network

cognitive radio networks

cognitive radio systems

collaborative networks

Cheung, W.M., Matthews, P.C., Gao, James and Maropoulos, Paul G. (2008) Advanced product development integration architecture: an out-of-box solution to support distributed production networks. International Journal of Production Research, 46 (12). pp. 3185-3206. ISSN 0020-7543 (doi:10.1080/00207540601039767)

collaborative product development

Gao, James, Cheung, W.M., Bramall, D.G., Maropoulos, Paul G. and Aziz, Hayder (2006) Organizational knowledge encapsulation and re-use in collaborative product development. International Journal of Computer Integrated Manufacturing, 19 (7). pp. 736-750. ISSN 0951-192X (doi:10.1080/09511920500504479)

colour channels

Melis, W.J.C. and Kameyama, M. (2010) A study of the different uses of colour channels for traffic sign recognition on hierarchical temporal memory. In: Innovative Computing, Information and Control (ICICIC), 2009 Fourth International Conference on. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 111-114. ISBN 978-1-4244-5543-0 (doi:10.1109/ICICIC.2009.55)

combined cycle gas turbine

combined cycle power stations

communication channels

Rapajic, Predrag and Krusevac, Zarko B. (2008) Equivalent channel for capacity analysis of differential detection over time-varying communication channels. In: Proceedings of the 1st International Conference on Signal Processing and Telecommunication Systems ICSPCS'2007 Australia, Gold Coast December 17-19, 2007. DSP for Communication Systems, Tarrawanna, New South Wales, Australia, pp. 21-26. ISBN 9780975693445

communication system model

Krusevac, Z.B., Rapajic, P.B. and Kennedy, R.A. (2008) Communication system model for information rate evaluation of differential detection over time-varying channels. IET Communications, 2 (10). pp. 1301-1310. ISSN 1751-8628 (doi:10.1049/iet-com:20070610)

communications systems

comparison of materials

complex mode

Wang, Tong, Zhang, Lingmi and Tee, Kong Fah (2011) Extraction of real modes and physical matrices from modal testing. Earthquake Engineering and Engineering Vibration, 10 (2). pp. 219-227. ISSN 1993-503X (online) (doi:10.1007/s11803-011-0060-6)

complex permittivity

Dobson, R., Wu, R. and Callaghan, P. (2012) Blood glucose monitoring using microwave cavity perturbation. Electronics Letters, 48 (15). pp. 905-906. ISSN 0013-5194 (doi:10.1049/el.2012.1811)

complex permittivity value

Ogunlade, Olumide (2011) A mode matching analysis of rectangular dielectric discontinuities in metal waveguides applicable to characterisation of liquids. In: IET 8th International Conference on Computation in Electromagnetics (CEM 2011) (CP577). IET Conference Publications, 2011 (CP577). The Institution of Engineering and Technology, pp. 28-29. ISBN ISBN: 978-1-84919-468-6 (doi:10.1049/cp.2011.0022)

composite laminates

composite sphere model

Li, Chun-Qing and Zheng, Jian Jun (2007) Closed-form solution for predicting elastic modulus of concrete. ACI Materials Journal, 104 (5). pp. 539-546. ISSN 0889-325X

computer architecture

Melis, W.J.C., Chizuwa, S. and Kameyama, M. (2009) Evaluation of the hierarchical temporal memory soft computing platform and its VLSI architecture. In: Multiple-Valued Logic, 2009. ISMVL '09. 39th International Symposium on. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 233-238. ISBN 978-1-4244-3841-9 ISSN 0195-623X (doi:10.1109/ISMVL.2009.11)

computer based teaching

Beams, Rodney and Coutroubis, Alec (2008) The use of computer based teaching (CBT) in the training of marine engineers. In: 2nd International Scientific Maritime Conference - Human Resources in the Shipping Industry: New Trends and Challenges in the 21st Century, 21-22 November 2008, Limassol. (Unpublished)

Coutroubis, Alec and Beams, Rodney (2007) The use of computer based training (CBT) in the training of marine engineers. In: LMA 9th International Conference Maritime Transport and Infrastructure-2007, 19-20 April 2007, Riga, Latvia. (Unpublished)

computer modelling

Angulo Pinzon, Oscar Andres (2012) Modelling of dosator filling and discharge. PhD thesis, University of Greenwich.

computer networks

Ma, Mingchao (2007) Distributed RBAC for subscription-based remote network services. PhD thesis, University of Greenwich.

computer-aided design of microcircuits

Mallik, S., Bauer, R., Hübner, F. and Ekere, N.N. (2011) Evaluating print performance of Sn-Ag-Cu leadfree solder pastes used in electronics assembly process. In: International Conference on Advances in Materials and Processing Technologies (AMPT2010). AIP Conference Proceedings (1315/1). American Institute of Physics (AIP), Melville, NY, USA, pp. 33-38. ISBN 978-0-7354-0871-5 ISSN 0094-243X (doi:10.1063/1.3552465)

computer-aided process planning

Gao, James and Sharma , R. (2007) A knowledge-based manufacturing and cost evaluation system for product design/re-design. The International Journal of Advanced Manufacturing Technology, 33 (9-10). pp. 856-865. ISSN 0268-3768 (doi:10.1007/s00170-006-0530-6)

concentration measurement

Dobson, R., Wu, R. and Callaghan, P. (2012) Blood glucose monitoring using microwave cavity perturbation. Electronics Letters, 48 (15). pp. 905-906. ISSN 0013-5194 (doi:10.1049/el.2012.1811)

conceptual analysis

conceptual design

concrete

Alani, A., MacMullen, J., Telik, O. and Zhang, Z.Y. (2012) Investigation into the thermal performance of recycled glass screed for construction purposes. Construction and Building Materials, 29. pp. 527-532. ISSN 0950-0618 (doi:10.1016/j.conbuildmat.2011.07.020)

Li, Chun-Qing, Melchers, Robert E., Davidson, Mark and Yang, Shangtong (2008) Condition assessment of a 63-year old reinforced concrete structure exposed to the North Sea. In: Conference on Durability of Building Materials and Components (11DBMC) "Globality and Locality in Durability", 11-14 May 2008, Istanbul, Turkey. (Unpublished)

Melchers, R.E. and Li, C.Q. (2010) Predicting the life of reinforced concrete structures in severe marine environments. In: Bridge maintenance, safety, management and life-cycle optimization: Proceedings of the Fifth International conference on bridge maintenance, safety and management, Philadelphia, Pennsylvania, USA, 11-15 July 2010. Proceedings of the 5th International IABMAS Conference, 2010 (5). CRC Press, Leiden, The Netherlands, p. 314. ISBN 978-0-415-87786-2 (print), 978-0-415-89137-0 (ebook)

Tee, K.F. and Li, C.Q. (2011) A numerical study of maintenance strategy for concrete structures in marine environment. In: Applications of Statistics and Probability in Civil Engineering - Proceedings of the 11th International Conference on Applications of Statistics and Probability in Civil Engineering. The International Conference on Application of Statistics and Probability in Civil Engineering (ICASP) (11). CRC Press, London, UK, pp. 181-183. ISBN 978-0-415-66986-3 (Hardback), 978-0-203-14479-4 (eBook)

concrete cracking

Yang, Shangtong (2010) Concrete crack width under combined reinforcement corrosion and applied load. PhD thesis, University of Greenwich.

concrete structures

Li, Chun-Qing and Shao, L. (2007) Reliability based asset management strategy for concrete infrastructure. International Journal of Materials and Structural Reliability, 5 (1). pp. 13-28.

Yang, Shangtong and Li, Chun-Qing (2011) Numerical prediction for corrosion-induced concrete crack width. Proceedings of Institution of Civil Engineers: Construction Materials, 164 (6). pp. 293-303. ISSN 1747-650X (print), 1747-6518 (online) (doi:10.1680/coma.1000046)

concretes

Ahangar-Asr, Alireza, Faramarzi, Asaad, Javadi, Akbar A. and Giustolisi, Orazio (2011) Modelling mechanical behaviour of rubber concrete using evolutionary polynomial regression. Engineering Computations, 28 (4). pp. 492-507. ISSN 0264-4401 (doi:10.1108/02644401111131902)

condensed model

Tee, K.F., Koh, C.G. and Quek, S.T. (2009) Numerical and experimental studies of a substructural identification strategy. Structural Health Monitoring, 8 (5). pp. 397-410. ISSN 1475-9217 (doi:10.1177/1475921709102089)

connection design

Rizzuto, J.P. and Larsen, O.Popovic (2010) Connection systems in reciprocal frames and mutually supported elements space structure networks. International Journal of Space Structures, 25 (4). pp. 243-256. ISSN 0266-3511 (Submitted) (doi:10.1260/0266-3511.25.4.243)

constitutive model

Faramarzi, Asaad, Javadi, Akbar and Ahangar-Asr, Alireza (2013) Numerical implementation of EPR-based material models in finite element analysis. Computers and Structures, 118. pp. 100-108. ISSN 0045-7949 (doi:10.1016/j.compstruc.2012.10.002)

constitutive modeling

Javadi, Akbar A., Ahangar-Asr, Alireza, Faramarzi, Asaad and Mottaghifard, Nasim (2012) An EPR approach to the modeling of civil and geotechnical engineering systems. In: Metaheuristics in Water, Geotechnical and Transport Engineering. Elsevier Inc., Waltham, MA, USA, pp. 311-326. ISBN 978-0-12-398296-4 (doi:10.1016/B978-0-12-398296-4.00013-1)

Javadi, Akbar A., Mehravar, Moura, Faramarzi, Asaad and Ahangar-Asr, Alireza (2009) An artificial intelligence based finite element method. ISAST Transactions on Computers and Intelligent Systems, 1 (2). pp. 1-7. ISSN 1798-2448

constitutive modelling

Javadi, Akbar A., Faramarzi, Asaad and Alani, Amir (2012) Intelligent computational solutions for constitutive modelling of materials in finite element analysis. In: ACME2012: Proceedings of the 20th UK National Conference of the Association for Computational Mechanics in Engineering. The University of Manchester, Manchester, UK, pp. 321-324. ISBN 978-0-903808-06-4

constraint lengths

construction

Kilic, Gokhan (2012) Application of advanced non-destructive testing methods on bridge health assessment and analysis. PhD thesis, University of Greenwich.

construction materials

Melchers, R.E., Li, C.Q. and Davison, M.A. (2009) Observations and analysis of a 63-year-old reinforced concrete promenade railing exposed to the North Sea. Magazine of Concrete Research, 61 (4). pp. 233-243. ISSN 0024-9831 (doi:10.1680/macr.2007.00093)

construction procedures

contacts

contention

Hamadani, Ehsan and Rakocevic, Veselin (2007) TCP Contention Control: a cross layer approach to improve TCP performance in multihop ad hoc networks. In: Wired/Wireless Internet Communications: 5th International Conference, WWIC 2007, Coimbra, Portugal, May 23-25, 2007. Proceedings. Lecture Notes in Computer Science (4517). Springer, Berlin / Heidelberg, pp. 1-16. ISBN 978-3-540-72694-4 (doi:10.1007/978-3-540-72697-5_1)

continuous

Robinson, J.P., Kingman, S.W., Snape, C.E., Bradshaw, S.M., Bradley, M.S.A., Shang, H. and Barranco, R. (2010) Scale-up and design of a continuous microwave treatment system for the processing of oil-contaminated drill cuttings. Chemical Engineering Research and Design, 88 (2). pp. 146-154. ISSN 0263-8762 (doi:10.1016/j.cherd.2009.07.011)

continuous improvements

continuum mechanics

Amalu, Emeka Hyginus (2012) Modelling of the reliability of flip chip lead-free solder joints at high-temperature excursions. PhD thesis, University of Greenwich.

continuum modeling

Christakis, Nicholas, Chapelle, Pierre, Strusevitch, Nadia, Bridle, Ian, Baxter, John, Patel, Mayur, Cross, Mark, Tüzün, Ugur, Reed, Alan R. and Bradley, Michael S.A. (2006) A hybrid numerical model for predicting segregation during core flow discharge. Advanced Powder Technology, 17 (6). pp. 641-662. ISSN 0921-8831 (doi:10.1163/156855206778917715)

contour-parallel offset

Hinduja, S., Mansor, M.S.A. and Owodunni, O.O. (2010) Voronoi-diagram-based linking of contour-parallel tool paths for two-and-a-half-dimensional closed-pocket machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (9). pp. 1329-1350. ISSN 0954-4054 (Print), 2041-2975 (Online) (doi:10.1243/09544054JEM1596)

contrast-enhanced

control

Chen, Hua-Peng, Wang , K.L. and Tee, Kong-Fah (2010) Structural health monitoring utilizing dynamic perturbation method. In: 3rd International Conference on Dynamics, Vibration and Control (ICDVC), 12-14 May 2010, Hangzhou, China.

control concepts

Ferdowsi, Mohsen, Grau Unda, Iñaki, Karfopoulos, Evangelos, Papadopoulos, Panagiotis, Skarvelis-Kazakos, Spyros, Cipcigan, Liana, Raab, Andreas F., Dimeas, Aris, Abbasi, Ehsan and Strunz, Kai (2010) Controls and EV aggregation for virtual power plants. Project Report. MERGE.

Moreira, C.L., Rua, David, Karfopoulos, E., Zountouridou, E., Soares, F.J., Bourithi, I., Grau, I., Peças Lopes, J.A., Cipcigan, L.M., Seca, Luis, Moschakis, Marios, Rocha Almeida, P.M., Moutis, P., Papadopoulos, P., Rei, R.J., Bessa, Ricardo J. and Skarvelis-Kazakos, S. (2010) Extend concepts of MG by identifying several EV smart control approaches to be embedded in the Smart Grid concept to manage EV individually or in clusters. Project Report. MERGE.

control theory

Woodhead, Stephen Robert (1992) The measurement of particle velocity and suspension density in pneumatic coal injection systems. PhD thesis, University of Greenwich.

convergence speed

converging sections

Ariza-Zafra, K., Berry, R., Bradley, M.S.A. and Santana, J.C. (2010) Achieving mass flow in silos with shallow converging sections using inverted cones. Bulk Solids Handling (Whitepaper). ISSN 0173-9980

conveying systems

Hettiaratchi, Kaushika (2006) A comparison between the pressure gradients in vertical and horizontal pneumatic conveying, with an investigation into the effect of pipeline bore in vertical conveying. PhD thesis, University of Greenwich.

conveyor manufacturing processes

Woodhead, Stephen Robert (1992) The measurement of particle velocity and suspension density in pneumatic coal injection systems. PhD thesis, University of Greenwich.

conveyors

Woodcock, C. R. (1978) The flow of particulate bulk solids in an air-assisted gravity conveyor. PhD thesis, Thames Polytechnic.

coolers

cooperative communication

cooperative diversity

cooperative networks

cooperative users

copper

core flow

correlation

corrosion

Mahmoodian, M. and Li, C.Q. (2012) Service life prediction of underground concrete pipes subjected to corrosion. In: Concrete Solutions 2011. Concrc -The Concrete Solutions series of International Conferences on Concrete Repair . CRC Press. ISBN 9780415616225 (Hardback), 9780203134689 (ebook)

Corrosion Long-term performance

corrosion rate

cost

couplers

Wang, Yi, Ke, Maolong, Lancaster, M.J. and Huang, F. (2009) Micromachined millimeter-wave rectangular-coaxial branch-line coupler with enhanced bandwidth. IEEE Transactions on Microwave Theory and Techniques, 57 (7). pp. 1655-1660. ISSN 0018-9480 (doi:10.1109/TMTT.2009.2021872)

coupling analysis

coupling matrix optimisation

Shang, X., Wang, Y., Nicholson, G.L. and Lancaster, M.J. (2012) Design of multiple-passband filters using coupling matrix optimisation. IET Microwaves, Antennas & Propagation, 6 (1). pp. 24-30. ISSN 1751-8725 (Print), 1751-8733 (Online) (doi:10.1049/iet-map.2011.0261)

CR systems

crack closure

Tee, Kong-Fah, Christopher, C.J., James, M.N. and Patterson, E.A. (2007) Towards a new model of crack tip stress fields. International Journal of Fracture, 148 (4). pp. 361-371. ISSN 0376-9429 (doi:10.1007/s10704-008-9209-3)

crack closure

Christopher, C.J., James, M.N., Patterson, E.A. and Tee, Kong-Fah (2008) A quantitative evaluation of fatigue crack shielding forces using photoelasticity. Engineering Fracture Mechanics, 75 (14). pp. 4190-4199. ISSN 0013-7944 (doi:10.1016/j.engfracmech.2008.03.013)

crack shielding

James, M.N., Christopher, C.J., Lu, Yanwei, Tee, K.F. and Patterson, E.A. (2011) Crack tip shielding from a plastic 'inclusion'. Key Engineering Materials , 465 (1). pp. 1-8. ISSN 1662-9795 (doi:10.4028/www.scientific.net/KEM.465.1)

crack tip displacement

crack tip shielding

Christopher, C.J., James, M.N., Tee, Kong-Fah and Patterson, E.A. (2008) Evaluation of crack tip shielding using a photoelastic model. In: the SEM XI International Congress on Experimental and Applied Mechanics, 2-5 June 2008, Orlando, FL, USA, .

Tee, Kong-Fah, Christopher, C.J., James, M.N. and Patterson, E.A. (2007) New insights into plasticity-induced crack tip shielding via mathematical modelling and full field photoelasticity. Key Engineering Materials, 345-346. pp. 199-204. ISSN 1013-9826 (doi:10.4028/www.scientific.net/KEM.345-346.199)

Tee, Kong-Fah, Christopher, C.J., James, M.N. and Patterson, E.A. (2007) New insights into plasticity-induced crack tip shielding via mathematical modelling and full field photoelasticity. In: 10th International Conference on the Mechanical Behavior of Materials (ICM), 27-31 May 2007, Busan, Korea. (Unpublished)

crack tip stress

crack width

cracking

Li, Chun-Qing, Yang, Yang and Melchers, Robert E. (2008) Prediction of reinforcement corrosion in concrete and its effects on concrete cracking and strength reduction. ACI Materials Journal, 105 (1). pp. 3-10. ISSN 0889-325X

credit risk management

AL-Shawabkeh, Abdallah and Tambyrajah, Antony (2009) Knowledge management in Jordanian banks. International Journal of Knowledge, Culture and Change Management, 9 (9). pp. 105-124. ISSN 1447-9524

creep

Durairaj, Rajkumar, Mallik, Sabuj and Ekere, Ndy (2008) Solder paste characterisation: towards the development of quality control (QC) tool. Soldering & Surface Mount Technology, 20 (3). pp. 34-40. ISSN 0954-0911 (doi:10.1108/09540910810885705)

Mallik, Sabuj, Ekere, Ndy, Durairaj, Rajkumar and Marks, Antony (2008) An investigation into the rheological properties of different lead-free solder pastes for surface mount applications. Soldering & Surface Mount Technology, 20 (2). pp. 3-10. ISSN 0954-0911 (doi:1108/09540910810871511)

Marks, Antony, Ekere, Ndy, Mallik, Sabuj and Bhatti, Rajinderpal (2011) Effect of particle size distribution (PSD) and flux medium on the creep recovery performance of lead-free solder pastes. Soldering and Surface Mount Technology, 23 (2). pp. 75-84. ISSN 0954-0911 (doi:10.1108/09540911111120140)

creep-recovery

Ekere, Ndy and Mallik, Sabuj (2008) A methodology for characterising new lead-free solder paste formulations used for flip-chip assembly applications. In: Smart processing technology: SPT '07. High Temperature Society of Japan, Ibaraki, Japan, pp. 59-64.

crisp coating

crisps

critical success factors

AL-Shawabkeh, Abdallah and Tambyrajah, Antony (2009) Knowledge management in Jordanian banks. International Journal of Knowledge, Culture and Change Management, 9 (9). pp. 105-124. ISSN 1447-9524

cross-coupled filters

cultural change

Bhatti, Rajinderpal and Berkhauer-Smith, Samantha (2007) Integrating both technical and cultural aspects of process improvement. In: 5th International Conference on Manufacturing Research (ICMR 2007) , 11- 13 September 2007, De Montfort University Leicester. (Unpublished)

customer-driven

Soroka, A.J. and Hieu, L.C. (2011) Design challenges for implementing a customer driven mass-customisation system. In: Proceedings - INDIN 2011: 2011 9th IEEE International Conference on Industrial Informatics. Institute of Electrical and Electronics Engineers Inc, Piscataway, USA, pp. 857-862. ISBN 9781457704338 (Online), 9781457704352 (Print) (doi:10.1109/INDIN.2011.6035005)

customisation

cutting conditions

Owodunni, Oladele, Hinduja, Srichand, Mekid, Samir and Zia, Ahmad (2007) An investigation of optimum cutting conditions for STEP-NC turned features. In: Innovative Production Machines and Systems Conference 2007 (IPROMS), 2-13 July 2007, http://conference.iproms.org/ [Virtual Conference].

cyber defence

Tidy, Luc, Woodhead, Steve and Wetherall, Jodie (2013) A large-scale zero-day worm simulator for cyber-epidemiological analysis. International Journal of Advances in Computer Networks and its Security, 3 (1). pp. 69-73. ISSN 2250-3749 (doi:10.3850/978-981-07-5461-7_45)

cyclic loading

Javadi, Akbar A., Faramarzi, Asaad and Ahangar-Asr, Alireza (2012) Analysis of behaviour of soils under cyclic loading using EPR-based ﬁnite element method. Finite Elements in Analysis and Design, 58. pp. 53-65. ISSN 0168-874X (doi:10.1016/j.finel.2012.04.005)

cylinders

Ashley, Richard Martin (1980) Forces on cylinders in relative fluid motion. MPhil thesis, Thames Polytechnic.

cylindrical concrete

cylindrical roof shells

Ostovari-Dailamani, Shadi and Croll, James G. A. (2009) Effect of pre-loading on response of cylindrical roof shells under earthquake loading. In: 9th Asia Pacific Conference on Shell and Spatial Structures (APCS) 2009, 27-29 May 2009, Nagoya Congress Center, Nagoya, Japan. (Submitted)

damage assessment

Chen, Hua-Peng (2008) Application of regularization methods to damage detection in large scale plane frame structures using incomplete noisy modal data. Engineering Structures, 30 (11). 3219 - 3227. ISSN 0141-0296 (doi:10.1016/j.engstruct.2008.04.038)

data origin authentication

Adekunle, A.A. and Woodhead, S.R. (2009) On efficient data integrity and data origin authentication for wireless sensor networks utilising block cipher design techniques. In: NGMAST 2009: the Third International Conference on Next Generation Mobile Applications, Services and Technologies. IEEE Computer Society Press, Cardiff, UK, pp. 419-424. ISBN 978-0-7695-3786-3 (doi:10.1109/NGMAST.2009.78)

data communication

data integrity

data mining

Ahangar-Asr, A., Faramarzi, A., Mottaghifard, N. and Javadi, A.A. (2011) Modeling of permeability and compaction characteristics of soils using evolutionary polynomial regression. Computers & Geosciences, 37 (11). pp. 1860-1869. ISSN 0098-3004 (doi:10.1016/j.cageo.2011.04.015)

Javadi, A.A., Ahangar-Asr, A., Johari, A., Faramarzi, A. and Toll, D. (2012) Modelling stress-strain and volume change behaviour of unsaturated soils using an evolutionary based data mining technique, an incremental approach. Engineering Applications of Artificial Intelligence, 25 (5). pp. 926-933. ISSN 0952-1976 (doi:10.1016/j.engappai.2012.03.006)

data rate

data rates

data-fusion rules

DC-DC converter

Naayagi, R.T., Forsyth, A.J. and Shuttleworth, R. (2011) Performance analysis of DAB DC-DC converter under zero voltage switching. In: Proceedings of the 2011 1st International Conference on Electrical Energy Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineering, Inc., Piscataway, NJ, USA, pp. 56-61. ISBN 9781612843780 (doi:10.1109/ICEES.2011.5725302)

DCE

Chen, Li Choo (2007) Optimisation of rule-based testing for scheduling within a distributed computing environment. PhD thesis, University of Greenwich.

DCM

decentralized multi-user detection

Nijsure, Y., Litchfield, C., Chen, Yifan and Rapajic, P.B. (2009) Vector precoding scheme for multi-user MIMO systems. In: Vehicular Technology Conference Fall (VTC 2009-Fall). Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ, USA, pp. 1-5. ISBN 978-1-4244-2514-3 (print), 978-1-4244-2515-0 (electronic) ISSN 1090-3038 (doi:10.1109/VETECF.2009.5378987)

decision feedback

decode and forward

decoding algorithm

defective metallisation

deformation

delay effects

delay-Doppler resolution

dendritic growth

Kao, A. and Pericleous, K. (2012) The effect of secondary arm growth on thermoelectric magnetohydrodynamics. Magnetohydrodynamics, 48 (2). pp. 361-370. ISSN 0024-998X

density

density and concentrations

design

Baxter, David, Doultsinou, Athanasia, Roy, Rajkumar and Gao, James (2010) A life cycle model for product-service systems design. In: 5th International Conference on Digital Enterprise Technology. Publibook, Paris, France, pp. 441-456.

Baxter, David, Roy, Rajkumar, Doultsinou, Athanasia, Gao, James and Kalta, Mohamad (2009) A knowledge management framework to support product-service systems design. International Journal of Computer Integrated Manufacturing, 22 (12). pp. 1073-1088. ISSN 0951-192X (Print), 1362-3052 (Online) (doi:10.1080/09511920903207464)

Motamed, Jubin, Al-Hussaini, Abbas and Alani, Amir Morteza (2012) Shear design of HSC beams with combination of links and horizontal web steel. Magazine of Concrete Research, 64 (9). pp. 781-791. ISSN 0024-9831 (print), 1751-763X (electronic) (doi:10.1680/macr.11.00047)

design challenges

design conflict resolving

Fei, Genyuan, Gao, James, Owodunni, Oladele and Tang, X. (2011) A model-driven and knowledge-based methodology for engineering design change management. Computer-Aided Design and Applications, 8 (3). pp. 373-382. ISSN 1686-4360 (doi:10.3722/cadaps.2011.373-382)

design conflict solving

design for manufacture

Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2008) Knowledge reuse in manufacturability analysis. Robotics and Computer Integrated Manufacturing, 24 (4). pp. 508-513. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.003)

Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2009) Manufacturing knowledge verification in design support systems. International Journal of Production Research, 47 (12). pp. 3179-3204. ISSN 0020-7543 (Print), 1366–588X (Online) (doi:10.1080/00207540701802452)

design for service

design knowledge reuse

Baxter, David, Rajkumar, Roy and Gao, James (2008) Design process knowledge reuse challenges and issues. Computer Aided Design and Applications, 5 (6). pp. 942-952. ISSN 1686-4360 (doi:10.3722/cadaps.2008.942-952)

Gao, James, Baxter, David, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2007) An engineering design knowledge reuse methodology using process modelling. Research in Engineering Design, 18 (1). pp. 37-48. ISSN 0934-9839 (doi:10.1007/s00163-007-0028-8)

design methodology

Baxter, David, Gao, James, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2008) A framework to integrate design knowledge reuse and requirements management in engineering design. Robotics and Computer-Integrated Manufacturing, 24 (4). pp. 585-593. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.010)

design process modelling

Gao, James, Zhang, Pengcheng, Baxter, David and Kalta, Mo (2007) Developing a design process model for the reuse of knowledge. In: Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.

design process support

design requirements

Doultsinou, Athanasia, Roy, Rajkumar, Baxter, David, Gao, James and Mann, Andy (2009) Developing a service knowledge reuse framework for engineering design. Journal of Engineering Design, 20 (4). pp. 389-411. ISSN 0954-4828 (Print), 1466-1837 (Online) (doi:10.1080/09544820903149354)

design reuse

design support

destination nodes

detection

Maung, T.S., Chen, Hua Peng and Alani, A.M. (2011) Real time structural damage assessment from vibration measurements. In: 9th International Conference on Damage Assessment of Structures (DAMAS 2011). Journal of Physics: Conference Series, 305 (1). IOP Publishing, Bristol, UK. ISSN 1742-6588 (Print), 1742-6596 (Online) (doi:10.1088/1742-6596/305/1/012096)

deterioration

deterministic angle clustering

Chen, Y., Zhang, Z., Hu, L. and Rapajic, P.B. (2009) Geometry-based statistical model for radio propagation in rectangular office buildings. Progress In Electromagnetics Research B, 17. pp. 187-212. ISSN 1937-6472 (doi:10.2528/PIERB09080603)

device isolation

dielectric contrasts

dielectric spectroscopy

Dobson, R., Wu, R. and Callaghan, P. (2012) Blood glucose monitoring using microwave cavity perturbation. Electronics Letters, 48 (15). pp. 905-906. ISSN 0013-5194 (doi:10.1049/el.2012.1811)

dielectric-properties

different frequency

differential amplifiers

Wu, R., Lidgey, F.J., Hayatleh, K. and Hart, B.L. (2010) Differential amplifier with improved gain-accuracy and linearity. Interntional Journal of Circuit Theory and Applications, 38 (8). pp. 829-844. ISSN 0098-9886 (doi:10.1002/cta.601)

differential decoding

differential detection

digital communication systems

digital filters

digital image correlation (DIC)

digital signature

direct mount snubber

directives

disassembly

disaster

Motamed, Jubin (2005) The Bam earthquake of 26 December 2003, Iran. Other. Institution of Structural Engineers / Earthquake Engineering Field Investigation Team (EEFIT) [website], London, UK.

discharge rates

discrete memoryless channel (DMC)

dispersive multipath propagation environment

distributed algorithm

distributed cognitive radar

Chen, Yifan and Rapajic, Predrag (2008) Human respiration rate estimation using ultra-wideband distributed cognitive radar system. International Journal of Automation and Computing, 5 (4). pp. 325-333. ISSN 1476-8186 (doi:10.1007/s11633-008-0325-3)

Distributed Computing Environment

Chen, Li Choo (2007) Optimisation of rule-based testing for scheduling within a distributed computing environment. PhD thesis, University of Greenwich.

distributed control

distributed control approach

distributed energy resources

Karfopoulos, Evangelos L., Papadopoulos, Panagiotis, Skarvelis-Kazakos, Spyros, Grau, Inaki, Cipcigan, Liana M., Hatziargyriou, Nikos and Jenkins, Nick (2011) Introducing electric vehicles in the microgrids concept. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082212)

distributed generation

Grau Unda, I., Papadopoulos, P., Skarvelis-Kazakos, S., Cipcigan, L.M. and Jenkins, N. (2011) Energy storage for balancing a local distribution network area. In: Energy Storage in the Emerging Era of Smart Grids. InTech, New York, USA, pp. 301-320. ISBN 978-953-307-269-2 (doi:10.5772/18305)

distributed MIMO

distributed power generation

distributed role-based access control

Ma, Mingchao (2007) Distributed RBAC for subscription-based remote network services. PhD thesis, University of Greenwich.

distribution network

distribution networks

distribution systems

diversity

diversity gain

diversity gains

domestic environments

dosator filling machines

Angulo Pinzon, Oscar Andres (2012) Modelling of dosator filling and discharge. PhD thesis, University of Greenwich.

dosators

Angulo, O., Berry, R., Bradley, M. and Antonijevic, M. (2009) Modelling of a dosator: an analytical approach based on measured powder flow properties. Journal of Pharmacy and Pharmacology, 61 (S1). A123-A123. ISSN 0022-3573 (Print), 2042-7158 (Online) (doi:10.1211/002235709789037053)

Angulo Pinzon, O.A., Bradley, Michael S.A., Berry, Rob and Farnish, Richard J. (2008) Modelling dosator filling and discharge of powder. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 586-591. ISBN 9788272062896

Angulo Pinzon, Oscar Andres (2012) Modelling of dosator filling and discharge. PhD thesis, University of Greenwich.

double layers

DRBAC

Ma, Mingchao (2007) Distributed RBAC for subscription-based remote network services. PhD thesis, University of Greenwich.

drill cuttings

DRM

drug delivery

dry powders

DSR

DSR routing protocol

dual active bridge (DAB)

dual ground

ductility

dust

dynamic

dynamic modal analysis

dynamic perturbation method

dynamic source routing

EAF

Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.

earthquake

Motamed, Jubin (2005) The Bam earthquake of 26 December 2003, Iran. Other. Institution of Structural Engineers / Earthquake Engineering Field Investigation Team (EEFIT) [website], London, UK.

Rezania, Mohammad, Faramarzi, Asaad and Javadi, Akbar A. (2011) An evolutionary based approach for assessment of earthquake-induced soil liquefaction and lateral displacement. Engineering Applications of Artificial Intelligence, 24 (1). pp. 142-153. ISSN 0952-1976 (doi:10.1016/j.engappai.2010.09.010)

earthquake analysis

Ostovari-Dailamani, Shadi and Croll, James G. A. (2008) Behaviour of cylindrical and doubly-curved shell roofs under earthquake. In: Proceedings of the 6th International Conference on Computation of Shell and Spatial Structures. Cornell University, Cornell, USA.

earthquake damage

earthquakes

effective properties

Okereke, M. I. and Akpoyomare, A. I. (2013) A virtual framework for prediction of full-field elastic response of unidirectional composites. Computational Materials Science, 70. pp. 82-99. ISSN 0927-0256 (Online) (doi:/10.1016/j.commatsci.2012.12.036)

eighth-order X-band dual-band waveguide filter

elastic and plastic behaviour

elastic modulus

Li, Chun-Qing and Zheng, Jian Jun (2007) Closed-form solution for predicting elastic modulus of concrete. ACI Materials Journal, 104 (5). pp. 539-546. ISSN 0889-325X

elastic waves

elasticity

electric resistance

Wang, W., Liu, Z.D., Tian, Z.J., Huang, Y.H., Liu, Z.X. and Ekere, N.N. (2008) Study of wire electrolytic-spark hybrid machining of silicon solar wafer and surface characteristics. In: 2nd Electronics System Integration Technology Conference, Greenwich, UK. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc, Piscataway, NJ, USA, 593-596 . ISBN 978-1-4244-2813-7 (Print), 978-1-4244-2814-4 (Electronic) (doi:10.1109/ESTC.2008.4684417)

electric vehicle

electric vehicle grid integration

Electric Vehicles

electrical engineering

Li, Ji (2007) A study of the solid particle erosion performance of automative and other novel low carbon steels. PhD thesis, University of Greenwich.

electrode

Krabicka, Jan and Yan, Yong (2009) Finite-element modeling of electrostatic sensors for the flow measurement of particles in pneumatic pipelines. IEEE Transactions on Instrumentation and Measurement, 58 (8). pp. 2730-2736. ISSN 0018-9456 (doi:10.1109/TIM.2009.2016288)

Krabicka, Jan and Yan, Yong (2009) Optimised design of intrusive electrostatic sensors for the velocity measurement of pneumatically conveyed particles. In: IEEE Instrumentation and Measurement Technology Conference, 2009. I2MTC '09. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 341-345. ISBN 978-1-4244-3352-0 ISSN 1091-5281 (doi:10.1109/IMTC.2009.5168472)

electrodynamic sensors

Yan, Y., Byrne, B., Woodhead, Steve and Coulthard, John M. (1995) Velocity measurement of pneumatically conveyed solids using electrodynamic sensors. Measurement Science and Technology, 6 (5). pp. 515-537. ISSN ISSN 0957-0233 (Print) ISSN 1361-6501 (Online) (doi:10.1088/0957-0233/6/5/013)

electron-multiplying charge-coupled device (EMCCD)

Krabicka, Jan, Lu, Gang and Yan, Yong (2011) Profiling and characterization of flame radicals by combining spectroscopic imaging and neural network techniques. IEEE Transactions on Instrumentation and Measurement, 60 (5). pp. 1854-1860. ISSN 0018-9456 (doi:10.1109/TIM.2010.2102411)

electronic control unit

Mallik, Sabuj, Ekere, Ndy, Best, Chris and Bhatti, Raj (2011) Investigation of thermal management materials for automotive electronic control units. Applied Thermal Engineering, 31 (2-3). pp. 355-362. ISSN 1359-4311 (doi:10.1016/j.applthermaleng.2010.09.023)

Otiaba, K.C., Ekere, N.N., Amalu, E.H., Bhatti, R.S. and Mallik, S. (2012) Thermal management materials for electronic control unit: trends, processing technology and R and D challenges. Advanced Materials Research, 367. pp. 301-307. ISSN 1022-6680 (Print), 1662-8985 (Online) (doi:10.4028/www.scientific.net/AMR.367.301)

Otiaba, K.C., Ekere, N.N., Amalu, E.H., Bhatti, R.S. and Mallik, S. (2010) Thermal management materials for electronic control unit: trends, processing technology and R&D challenges. In: International Conference on Engineering Research & Development: Advances in Engineering Science & Technology, 7-9 September 2010, Benin City, Africa.

electronic control unit (ECU)

electronic materials

Electronic Nose

electronic unit

electronics assembly applications

Mallik, Sabuj, Ekere, Ndy, Durairaj, Rajkumar, Seman, Anton and Marks, Antony (2009) Wall-slip effects in SnAgCu solder pastes used in electronics assembly applications. Materials and Design, 30 (10). pp. 4502-4506. ISSN 0261-3069 (doi:10.1016/j.matdes.2009.05.028)

electronics manufacturing

electronics packaging

Salam, B. and Ekere, Ndy (2006) A study of inter-metallic compounds (IMC) formation and growth in ultra-fine pitch Sn-Ag-Cu lead-free solder joints. In: ESTC 2006: 1st Electronics Systemintegration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, pp. 988-994. ISBN 1424405521 (doi:10.1109/ESTC.2006.280131)

electrostatic charge

electrostatic charging

electrostatic modelling

electrostatic sensor

electrostatic sensors

Woodhead, Steve and Amadi-Echendu, J.E. (1995) Solid phase velocity measurements utilising electrostatic sensors and cross correlation signal processing. In: 1995 IEEE Instrumentation and Measurement Technology. Institute of Electrical and Electronics Engineers, New York, pp. 774-777. ISBN 978-0780326156 (doi:10.1109/IMTC.1995.515421)

Woodhead, Stephen Robert (1992) The measurement of particle velocity and suspension density in pneumatic coal injection systems. PhD thesis, University of Greenwich.

elliptical random network (ERN)

Chen, Yifan and Rapajic, Predrag (2010) Decentralized wireless relay network channel modeling: An analogous approach to mobile radio channel characterization. IEEE Transactions on Communications, 58 (2). pp. 467-473. ISSN 0090-6778 (doi:10.1109/TCOMM.2010.02.080315)

EMCCD

Krabicka, Jan and Lu, Gang (2010) A spectroscopic imaging system for flame radical profiling. In: IEEE Instrumentation and Measurement Technology Conference (I2MTC), 2010. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 1387-1391. ISBN 978-1-4244-2832-8 ISSN 978-1-4244-2832-8 (doi:10.1109/IMTC.2010.5488056)

emissions

Krabicka, Jan and Lu, Gang (2009) Visualisation and characterisation of flame radical emissions through intensified spectroscopic imaging. In: Sensors & their Applications XV. Journal of Physics: Conference Series, 178 (1). IOP Publishing, Bristol, UK. ISSN 1742-6588 (Print), 1742-6596 (Online) (doi:10.1088/1742-6596/178/1/012041)

empirical model

Li, Chun-Qing, Zheng, J.J., Lawanwisut, Wimon and Melchers, Robert E. (2007) Concrete delamination caused by steel reinforcement corrosion. Journal of Materials in Civil Engineering, 19 (7). pp. 591-600. ISSN 0899-1561 (doi:10.1061/(ASCE)0899-1561(2007)19:7(591))

emulsions

Ekere, Ndy, Mallik, Sabuj, Durairaj, Rajkumar and Marks, Antony (2007) A study of the rheological properties of lead free solder paste formulations used for flip-chip interconnection. In: 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. IEEE/CPM International Electronics Manufacturing Technology Symposium . IEEE, New York, USA, pp. 165-171. ISBN 9781424413355 (doi:10.1109/IEMT.2007.4417065)

encoding digital data

Eneh, Titus Ikechukwu (2011) Adaptive MMSE multiuser receivers in MIMO OFDM wireless communication systems. PhD thesis, University of Greenwich.

end-to-end delay

energy and resource efficiency and effectiveness

energy management

energy storage

engineering

van Manen, P. (1984) The dynamic behaviour of rail vehicles operating at high speeds for manriding in British coal mines. PhD thesis, Thames Polytechnic.

engineering and management

engineering change

engineering design

Fei, Genyuan (2011) A methodology for engineering design change analysis using system modelling and knowledge management technologies. PhD thesis, University of Greenwich.

enterprise architecture framework

Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.

Zhang, Pengcheng and Gao, James (2010) Requirements driven knowledge system design for product development. In: Proceedings of the 6th CIRP-Sponsored International Conference on Digital Enterprise Technology. Advances in Intelligent and Soft Computing, 66/201 . Springer, Hong Kong, pp. 169-184. ISBN 9783642104299 ISSN 1867-5662 (doi:10.1007/978-3-642-10430-5_13)

enterprise integration

Gao, James, Baxter, David and Roy, Rajkumar (2009) Managing knowledge within the manufacturing enterprise: an overview. International Journal of Manufacturing Technology and Management (IJMTM), 18 (2). pp. 183-209. ISSN 1368-2148 (doi:10.1504/IJMTM.2009.026193)

enterprise knowledge

Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.

enterprise knowledge search

Jian, Guo (2011) Knowledge search for new product development: a multi-agent based methodology. PhD thesis, University of Greenwich.

enterprise modelling

enterprise resource planning

environmental dispatch

environmental economics

environmental monitoring

Carter, R.M., Krabicka, Jan, Yan, Y. and Cornwell, S. (2009) An integrated instrumentation system for combustion plant optimisation. pp. 780-784. (doi:10.1109/IMTC.2009.5168556)

EPR

Faramarzi, Asaad, Javadi, Akbar A. and Alani, Amir M. (2012) EPR-based material modelling of soils considering volume changes. Computers & Geosciences, 48. pp. 73-85. ISSN 0098-3004 (doi:10.1016/j.cageo.2012.05.015)

equations

equipment design

Berry, Rob, Bradley, Michael S.A., Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction test procedure, suitable for equipment design and powder characterisation. In: ICBMH Conference: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, Australia. (Unpublished)

equipment testing

Burnett, A. J. (1993) Wear in pneumatic conveying pipelines. Powder Handling and Processing, 15 (2). pp. 123-128. ISSN 0934-7348

erosion

Deng, Tong, Bingley, Mark S. and Bradley, Michael S.A. (2004) The influence of particle rotation on the solid particle erosion rate of metals. Wear, 256 (11-12). pp. 1037-1049. ISSN 0043-1648 (doi:10.1016/S0043-1648(03)00536-2)

erosion testers

erosive wear

error statistics

etching

Euro 6 standard

eutrophication

EV grid integration

evolutionary computation

evolutionary computing

evolutionary optimization

evolutionary regression

evolutionary techniques

excitation ultra wideband (UWB) waveforms

experiment

experimental and applied mechanics

experimental condensed models

Tee, Kong-Fah and Chen, Hua-Peng (2010) Retrieving full stiffness matrix from experimental condensed models. In: 10th International Conference on Recent Advances in Structural Dynamics, 12-14 July , Southampton, UK. (Unpublished)

experimental studies

explosion

face-to-face meetings

fading channels

failure

failure function

Fast Rayleigh fading

fatigue failure

Amalu, E.H., Ekere, N.N., Bhatti, R.S., Mallik, S., Takyi, G. and Ibhadode, A.O.A. (2011) Numerical investigation of thermo-mechanical behaviour of ball grid array solder joint at high temperature excursion. Advanced Materials Research, 367. pp. 287-292. ISSN 1662-8985 (Print), 1022-6680 (Online) (doi:10.4028/www.scientific.net/AMR.367.287)

Otiaba, Kenny C., Bhatti, R.S., Ekere, N.N., Mallik, S. and Ekpu, M. (2013) Finite element analysis of the effect of silver content for Sn–Ag–Cu alloy compositions on thermal cycling reliability of solder die attach. Engineering Failure Analysis, 28. pp. 192-207. ISSN 1350-6307 (In Press)

fatigue failures

Amalu, Emeka H. and Ekere, Ndy N. (2012) High temperature reliability of lead-free solder joints in a flip chip assembly. Journal of Materials Processing Technology, 212 (2). pp. 471-483. ISSN 0924-0136 (doi:10.1016/j.jmatprotec.2011.10.011)

fault location

feature-based model

feedback control

feeder drivers

feeding

femtocell

Zahir, Talha, Arshad, Kamran, Nakata, Atsushi and Moessner, Klaus (2013) Interference management in femtocells. IEEE Communications Surveys & Tutorials, 15 (1). pp. 293-311. ISSN 1553-877X (doi:10.1109/SURV.2012.020212.00101)

field report

Motamed, Jubin (2005) The Bam earthquake of 26 December 2003, Iran. Other. Institution of Structural Engineers / Earthquake Engineering Field Investigation Team (EEFIT) [website], London, UK.

field testing & monitoring

file type

Bhatti, Rajinderpal, Chowdary, Boppana V. and Sahatoo, Divesh (2007) Some STL file generation issues in rapid prototyping. In: 5th Latin American and Caribbean Conference for Engineering and Technology Developing Entrepreneural Engineers for the Sustainable Growth of Latin American and Caribbean: Education, Innovation, Technology, and Practice. Latin American and Caribbean Consortium of Engineering Institutions, Florida. ISBN 098228960X

filling

filling stress field

filtering

filters

Kessel, Stephen Ronald (1985) The interaction between rotary valves and pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

finite element

finite element analysis

finite element analysis (FEA)

finite element method

finite element method software

finite element method software generalised scattering matrix approach

finite element modelling (FEM)

Kilic, Gokhan (2012) Application of advanced non-destructive testing methods on bridge health assessment and analysis. PhD thesis, University of Greenwich.

finite elements

finite-element modeling (FEM)

finite-state Markov channel (FSMC)

finite-state Markov channels

finite-state Markov modeling

firepolishing

fires

van Manen, P. (1984) The dynamic behaviour of rail vehicles operating at high speeds for manriding in British coal mines. PhD thesis, Thames Polytechnic.

flame

flame radicals

flat-fading

flavoring powder

flavouring powder

flip chip

Amalu, Emeka H., Lui, Y.T., Ekere, Ndy, Bhatti, R.S. and Takyi, G. (2011) Investigation of the effects of reflow profile parameters on lead-free solder bump volumes and joint integrity. In: AIP Conference Proceedings. American Institute of Physics, Melville, NY, USA, pp. 639-644. (doi:10.1063/1.3552519)

flip chip (FC)

flip chip assembly

flip-chip

Durairaj, R., Mallik, S., Seman, A., Marks, A. and Ekere, N.N. (2009) Rheological characterisation of solder pastes and isotropic conductive adhesives used for flip-chip assembly. Journal of Materials Processing Technology, 209 (8). pp. 3923-3930. ISSN 0924-0136 (doi:10.1016/j.jmatprotec.2008.09.013)

Mallik, Sabuj (2009) Study of the time-dependent rheological behaviour of lead-free solder pastes and flux mediums used for flip-chip assembly applications. PhD thesis, University of Greenwich.

flip-chip assemblies

flip-chip assembly

Marks, Antony Edward (2012) Characterisation of lead-free solder pastes and their correlation with the stencil printing process performance. PhD thesis, University of Greenwich.

flip-chip assembly applications

Mallik, Sabuj, Ekere, Ndy, Marks, Antony, Seman, Anton and Durairaj, Rajkumar (2008) Modelling of the time-dependent flow behaviour of lead-free solder pastes used for flip-chip assembly applications. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 1219-1224. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684527)

flipchips

Mallik, S., Schmidt, M., Bauer, R. and Ekere, N.N. (2010) Evaluating solder paste behaviours through rheological test methods and their correlation to the printing performance. Soldering & Surface Mount Technology, 22 (4). pp. 42-49. ISSN 0954-0911 (doi:10.1108/09540911011076871)

Floe

flood forces

Falconer, Robert E., Boughton, B. and Paterson, F. (2010) Strengthening of masonry bridges against traffic and flooding. In: Structural Faults and Repair 2010 13th International Congress and Exhibition, 15-17 June 2010, Edinburgh.

flow

flow functions

flow measurement

flow of material

Aziza-Zafra, Karol (2010) A hat trick for coal handling. International Bulk Journal, 5. pp. 67-70. ISSN 0260-1087

flow pattern

flow patterns

Aziza-Zafra, Karol (2010) A hat trick for coal handling. International Bulk Journal, 5. pp. 67-70. ISSN 0260-1087

flow properties

flow property measurement

Khan, Naushad Salim (2008) Handling characteristics of coal/biomass mixes: measurements and establishing benchmarks. PhD thesis, University of Greenwich.

flow rate

Woodcock, C. R. (1978) The flow of particulate bulk solids in an air-assisted gravity conveyor. PhD thesis, Thames Polytechnic.

flowability

Berry, R.J. and Bradley, M.S.A. (2010) Development of the Brookfield Powder Flow Tester. In: Bulk Solids Europe 2010 Conference and IMechE Symposium in New Frontiers in Bulk Materials Handling , 9-10 September 2010, Glasgow. (Submitted)

Kulkarni, P.A., Berry, R.J. and Bradley, M.S.A. (2010) Review of the flowability measuring techniques for powder metallurgy industry. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 224 (3). pp. 159-168. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/09544089JPME299)

flowing stress field

fluid dynamics

Ashley, Richard Martin (1980) Forces on cylinders in relative fluid motion. MPhil thesis, Thames Polytechnic.

fluid flows

Andrews, D. G. H. (1979) The measurement of the velocities of particles in an air-solid flow. PhD thesis, Thames Polytechnic.

fluid mechanics

Jones, Mark G. (1988) The influence of bulk particulate properties on pneumatic conveying performance. PhD thesis, Thames Polytechnic.

Kessel, Stephen Ronald (1985) The interaction between rotary valves and pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

Mason, David John (1991) A study of the modes of gas-solids flow in pipelines. PhD thesis, Thames Polytechnic.

fluid velocity

Kao, A. and Pericleous, K. (2012) The effect of secondary arm growth on thermoelectric magnetohydrodynamics. Magnetohydrodynamics, 48 (2). pp. 361-370. ISSN 0024-998X

flux

Mallik, S., Ekere, N.N. and Bhatti, R. (2010) Empirical modeling of the time-dependent structural build-up of lead-free solder pastes used in the electronics assembly applications. Journal of ASTM International, 7 (9). ISSN 1546-962X (doi:10.1520/JAI103043)

Mallik, Sabuj (2009) Study of the time-dependent rheological behaviour of lead-free solder pastes and flux mediums used for flip-chip assembly applications. PhD thesis, University of Greenwich.

food powders

food production

Ermis, Ertan (2011) Establishment of a repeatable test procedure for measuring adhesion strength of particulates in contact with surfaces. PhD thesis, University of Greenwich.

forward-backward algorithm

foundry

Fourier

FR4 substrate

fracture mechanics

fractures

Moorman, John Everard (2005) A method for the probabilistic method assessment of structures containing defects. PhD thesis, University of Greenwich.

frame structure

frequency selective channels

frequency spectra

friction factor

Pillai, John (2009) Direct on-line measurement of wall friction of coal as an indicator of handleability. PhD thesis, University of Greenwich.

friction resistance

Cetin, D., Yildirim, S. and Kilic, G. (2011) A New Approach for Determination of Adhesion Coefficient in Pipejacking Method by Experimental and Numerical Analysis: An Example from Istanbul. Experimental Techniques. pp. 1-17. ISSN 1046-6789 (doi:10.1111/j.1747-1567.2011.00764.x)

frictional contact

FSMC

full field photoelasticity

gain-accuracy

gas sensors

gas turbine power stations

gas-blast erosion tester

gas-blast tester

gas–solid flow

Gaussian distributions

Khan, Noor M., Simsim, Mohammed T. and Rapajic, Predrag B. (2008) A generalized model for the spatial characteristics of the cellular mobile channel. IEEE Transactions on Vehicular Technology, 57 (1). pp. 22-37. ISSN 0018-9545 (doi:10.1109/TVT.2007.904532)

generalised distributed antenna systems

generalised scattering matrix approach

genetic algorithm

geological analysis

Ahangar-Asr, Alireza, Faramarzi, Asaad and Javadi, Akbar A. (2010) A new approach for prediction of the stability of soil and rock slopes. Engineering Computations, 27 (7). pp. 878-893. ISSN 0264-4401 (doi:10.1108/02644401011073700)

geometric channel models (GCMs)

geometric modeling

glacial-lake

glass

global product development

Gao, James, Bradfield, Daniel J. and Soltan, Hossein (2007) A metaknowledge approach to facilitate knowledge sharing in the global product development process. Computer-Aided Design and Applications, 4 (1-4). pp. 519-528. ISSN 1686-4360 (doi:10.3722/cadaps.2007.519-528)

global R&D

Kofinas, Alexander and Saur-Amaral, Irina (2008) 25 years of knowledge creation processes in pharmaceutical contemporary trends. Comportamento Organizacional e Gestão (COeG), 14 (2). pp. 257-280. ISSN 0872-9662 (print)

granular material

granular materials

granulated clay

Deng, Tong, Bradley, Michael S.A., Berry, Rob and Kostuch, J. (2008) Caking strength of granulated clay under frozen conditions. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 604-609. ISBN 9788272062896

graph traversal problem

Greece

ground penetrating radar (GPR)

Kilic, Gokhan (2012) Application of advanced non-destructive testing methods on bridge health assessment and analysis. PhD thesis, University of Greenwich.

ground slab

groundwater riparian

guidelines

handling

Khan, Naushad Salim (2008) Handling characteristics of coal/biomass mixes: measurements and establishing benchmarks. PhD thesis, University of Greenwich.

Pillai, John (2009) Direct on-line measurement of wall friction of coal as an indicator of handleability. PhD thesis, University of Greenwich.

heat preservation

heat sink

heat sink geometry

heat transfer

helibars

Hidden Markov Models (HMM)

Nijsure, Y., Chen, Yifan, Litchfield, C. and Rapajic, P.B. (2009) Hidden Markov model for target tracking with UWB radar systems. In: Personal, Indoor and Mobile Radio Communications. Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ, USA, pp. 2065-2069. ISBN 978-1-4244-5123-4 (online), 978-1-4244-5122-7 (print) (doi:10.1109/PIMRC.2009.5450337)

hierarchical control techniques

Bakalis, Panos and Ellis, J.E. (1989) Simulation of hierarchical control algorithms using a steady-state mathematical model of a vaporizer plant. Applied Mathematical Modelling, 13 (7). pp. 413-419. ISSN 0307-904X (doi:10.1016/0307-904X(89)90153-4)

Bakalis, Panos and Ellis, J.E. (1992) The application of large-scale systems optimization control algorithms. Applied Mathematical Modelling, 16 (4). pp. 201-207. ISSN 0307-904X (doi:10.1016/0307-904X(92)90058-B)

hierarchical temporal memory

high gain

Wu, Ruiheng, Lidgey, F.J. and Hayatleh, K. (2007) Design of amplifiers with high gain accuracy and high linearity. In: 2007 50TH Midwest Symposium on Circuits and Systems. Midwest Symposium on Circuits and Systems Conference Proceedings , 1-3 . Institute of Electrical and Electronics Engineers , New York, pp. 269-272. ISBN 9781424411757 (doi:10.1109/MWSCAS.2007.4488586)

high linearity

high power IGBTs

high strength concrete

high strength concrete beams

high temperature electronics

high-frequency amplifier

Hossain, M., Wu, Ruiheng, Litchfield, Charan and Rapajic, Predrag (2008) Linearization of high frequency amplifier using a generalised signal-injection method: case study. In: Analog Signal Processing Conference 2008 , 12 November 2008, Oxford Brookes University, Oxford, UK. (Unpublished)

high-rate compression

Okereke, Michael I., Buckley, C.P. and Siviour, C.R. (2012) Compression of polypropylene across a wide range of strain rates. Mechanics of Time-Dependent Materials. ISSN 1385-2000 (Print), 1573-2738 (Online) (In Press) (doi:10.1007/s11043-012-9167-z)

high-speed impacts

high-temperature electronics

Amalu, Emeka Hyginus (2012) Modelling of the reliability of flip chip lead-free solder joints at high-temperature excursions. PhD thesis, University of Greenwich.

honeycomb structures

horizontal web steel

HTE

Amalu, E.H., Ekere, N.N. and Bhatti, R.S. (2010) High temperature electronics: R&D challenges and trends in materials, packaging and interconnection technology. In: 2nd International Conference on Adaptive Science & Technology, 2009. (ICAST 2009). Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 146-153. ISBN 978-1-4244-3522-7 ISSN 0855-8906 (doi:10.1109/ICASTECH.2009.5409731)

Amalu, Emeka Hyginus (2012) Modelling of the reliability of flip chip lead-free solder joints at high-temperature excursions. PhD thesis, University of Greenwich.

humans

humidity

hybrid optimisation algorithm

hydraulic machinery

Jones, Mark G. (1988) The influence of bulk particulate properties on pneumatic conveying performance. PhD thesis, Thames Polytechnic.

hydraulic systems

Kessel, Stephen Ronald (1985) The interaction between rotary valves and pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

hydropower

ice

Harireche, Ouahid, Verdin, Patrick, Thompson, Chris P. and Hammond, David W. (2008) Explicit finite volume modeling of aircraft anti-icing and de-icing. Journal of Aircraft, 45 (6). pp. 1924-1936. ISSN 0021-8669 (doi:10.2514/1.34855)

identity

Sigthorsson, Gauti (2008) Home is where my archive is. In: Screen Studies Conference, 2008, University of Glasgow, Scotland. (Unpublished)

identity management

Ma, Mingchao (2007) Distributed RBAC for subscription-based remote network services. PhD thesis, University of Greenwich.

image processing

Carter, R.M., Krabicka, Jan, Yan, Y. and Cornwell, S. (2009) An integrated instrumentation system for combustion plant optimisation. pp. 780-784. (doi:10.1109/IMTC.2009.5168556)

imaging

impact damage

impact testing

implants

Le, C.H., Okereke, M.I., Nguyen, V.H., Dao, V.D., Soe, S., Zlatov, N. and Le, T.H. (2011) Personalised medical product development: Methods, challenges and opportunities. Romanian Review Precision Mechanics, Optics and Mechatronics, 40. pp. 11-20. ISSN 1584-5982

improvement strategy methodology

Bhatti, Rajinderpal and Berkhauer-Smith, Samantha (2007) An integrated methodology of manufacturing business improvement strategies. In: Advances in production management systems. International Federation for Information Processing, 246 . Springer, Boston, USA, pp. 355-362. ISBN 9780387741567 (doi:10.1007/978-0-387-74157-4)

improving operations

impulse noise

in-vitro fertilization

incomplete noisy measurements

indexing process

induced ventilation

inductive sensor

industrial plants

industrial production

industry

Khan, Naushad Salim (2008) Handling characteristics of coal/biomass mixes: measurements and establishing benchmarks. PhD thesis, University of Greenwich.

infiltration

Aravena, Jazmín E. and Dussaillant, Alejandro (2009) Storm-water infiltration and focused recharge modeling with finite-volume two-dimensional Richards equation: application to an experimental rain garden. Journal of Hydraulic Engineering, 135 (12). pp. 1073-1080. ISSN 0733-9429 (doi:10.1061/(ASCE)HY.1943-7900.0000111)

information and knowledge Search

Gao, James and Jian, Amanda (2007) A multi-agent based knowledge search methodology for product development. In: Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.

information azimuth-delay spectrum (IADS)

information capacity

information exchanges

information rate evaluation

information retrieval

information systems

Gao, James and Kuang, Li (2007) A framework to integrate manufacturing information systems. In: Digital enterprise technology perspectives and future challenges. Springer, New York, pp. 369-376. ISBN 9780387498638 (doi:10.1007/978-0-387-49864-5)

information systems design

Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.

information systems integration

information-theoretic approach

injection moulding

Abramovich, H., Burgard, M., Edery-Azulay, Lucy, Evans, K.E., Hoffmeister, M., Miller, W., Scarpa, F., Smith, C.W. and Tee, Kong-Fah (2010) Smart tetrachiral and hexachiral honeycomb: sensing and impact detection. Composites Science and Technology, 70 (7). 1072-1079 . ISSN 0266-3538 (doi:10.1016/j.compscitech.2009.07.017)

innovation and research

innovation management

innovative manufacturing processes

Mountney, Sara, Roy, Rajkumar and Gao, James (2011) Acquiring innovative manufacturing engineering knowledge for the preliminary design of complex mechanical components. In: Global Product Development. Springer, Berlin / Heidelberg, pp. 457-464. ISBN 978-3-642-15973-2 (doi:10.1007/978-3-642-15973-2_46)

integrated circuits

integrated strategy application

intelligent agent

intensified

inter-metallic compound (IMC)

inter-metallic compounds

inter-relationships

Berkhauer-Smith, Samantha (2009) The integration of lean thinking and manufacturing business improvement methods within the aerospace supply chain. PhD thesis, University of Greenwich.

inter-user interference

interconnected systems

interconnects

interface

interface crack

interface materials

interfacial transition zone

Li, Chun-Qing and Zheng, Jian Jun (2007) Closed-form solution for predicting elastic modulus of concrete. ACI Materials Journal, 104 (5). pp. 539-546. ISSN 0889-325X

interference management

interior environments

intermetallic compound

intermetallic compound (IMC)

Bernasko, Peter Kojo (2012) Study of intermetallic compound layer formation, growth and evaluation of shear strength of lead-free solder joints. PhD thesis, University of Greenwich.

internal feedback

interparticulate collision

Intersymbol Interference(ISI)

Oletu, G., Rapajic, P., Eneh, T. and Anang, K. (2011) Performance of iterative decoding with imperfect MMSE DFE. Wireless Days. pp. 1-3. ISSN 2156-9711 (doi:10.1109/WD.2011.6098137)

inverted cones

Iran

Motamed, Jubin (2005) The Bam earthquake of 26 December 2003, Iran. Other. Institution of Structural Engineers / Earthquake Engineering Field Investigation Team (EEFIT) [website], London, UK.

isotropic conductive adhesives

Durairaj, Rajkumar, Man, Lam Wai, Mallik, Sabuj and Ekere, Ndy (2009) Thixotropic studies of lead-based solder, lead-free solder and conductive adhesive pastes. In: 11th Electronic Material and Packaging Conference (EMAP), 1-3 Dec 2009, Penang, Malaysia. (Unpublished)

Durairaj, R., Mallik, S., Seman, A., Marks, A. and Ekere, N.N. (2008) Viscoelastic properties of solder paste and isotropic conductive adhesives used for flip-chip assembly. In: Electronic Manufacturing Technology Symposium (IEMT), 2008 33rd IEEE/CPMT International. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 1-8. ISBN 9781424433926 (print), 9781424433933 (electronic) ISSN 1089-8190 (doi:10.1109/IEMT.2008.5507801)

Durairaj, R., Man, Lam Wai, Ramesh, S., Wea, Lim Chia, Leng, Eu Poh, Ekere, N.N., Mallik, S. and Seman, A. (2009) Investigation of wall-slip effect on lead-free solder paste and isotropic conductive adhesives. In: Electronics Packaging Technology Conference, 2009. EPTC '09. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 422-426. ISBN 978-1-4244-5099-2 (print), 978-1-4244-5100-5 (e-ISBN) (doi:10.1109/EPTC.2009.5416511)

Ekere, Ndy, Durairaj, Rajkumar, Mallik, Sabuj and Seman, Anton (2009) Investigation of wall-slip behaviour in lead-free solder pastes and isotropic conductive adhesives. Sadhana - Academy Proceedings in Engineering Sciences, 34 (5). pp. 1-12. ISSN 0256-2499 (Print) 0973-7677 (Online) (doi:10.1007/s12046-009-0046-5)

iterative computation

iterative decoding

iterative equalization

Jenike shear cell

Jenike wall friction tester

JIT Compilation

Wetherall, Jodie and Woodhead, Steve (2008) Investigation into a modular rule-based testing method for testing business rules in scheduling applications. In: Proceedings 12th World Multi-Conference on Systemics, Cybernetics and Informatics. International Institute of Informatics and Systemics, Orlando, FL, USA, pp. 204-208. ISBN 9781934272312

jӧkulhlaup

Kalman filters

KM

Piorkowski, Barry Andrew, Gao, James Xiaoyu, Evans, Richard David and Martin, Nick (2013) A dynamic knowledge management framework for the high value manufacturing industry. International Journal of Production Research, 51 (7). pp. 2176-2185. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:10.1080/00207543.2012.709650)

Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.

know-how

knowledge

knowledge management

Mountney, S.L., Gao, James and Wiseall, S. (2007) A knowledge system to support manufacturing knowledge during preliminary design. International Journal of Production Research, 45 (7). pp. 1521-1537. ISSN 0020-7543 (doi:10.1080/00207540600942300)

knowledge creation

knowledge management

AL-Shawabkeh, Abdallah and Tambyrajah, Antony (2009) Knowledge management in Jordanian banks. International Journal of Knowledge, Culture and Change Management, 9 (9). pp. 105-124. ISSN 1447-9524

Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.

knowledge management system

knowledge representation

knowledge reuse

knowledge search methodology

Jian, Guo (2011) Knowledge search for new product development: a multi-agent based methodology. PhD thesis, University of Greenwich.

knowledge sharing

knowledge system design

land mobile radio cellular system

Anang, K.A., Rapajic, P.B., Bello, L. and Wu, R. (2012) Sensitivity of cellular wireless network performance to system and propagation parameters at carrier frequencies greater than 2 GHz. Progress In Electromagnetics Research B (PIERB), 40. pp. 31-54. ISSN 1937-6472 (doi:10.2528/PIERB12012303)

Anang, K.A., Rapajic, P.B., Eneh, T.I. and Bello, L. (2011) Sensitivity of information capacity of land mobile cellular system to propagation loss parameters at higher microwave frequencies. In: Wireless Communications and Mobile Computing Conference (IWCMC), 2011 7th International. Institute of Electrical and Electronic Engineers, Piscataway, NJ, USA, pp. 630-635. ISBN 978-1-4244-9539-9 (doi:10.1109/IWCMC.2011.5982619)

landmobile radio cellular system

large span

large span roof structures

large-scale systems

Laser Doppler velocimetry

Andrews, D. G. H. (1979) The measurement of the velocities of particles in an air-solid flow. PhD thesis, Thames Polytechnic.

laser Doppler velocimetry measurements

Woodhead, Steve, Pittman, A.N. and Ashenden, Stuart J. (1995) Laser Doppler velocimetry measurements of particle velocity profiles in gas-solid two-phase flows. In: 1995 IEEE Instrumentation and Measurement Technology. Institute of Electrical and Electronics Engineers, New York, pp. 770-773. ISBN 978-0780326156

lasers

late-time target response

Chen, Yifan, Craddock, I.J. and Kosmas, P. (2010) Feasibility study of lesion classification via contrast-agent-aided UWB breast imaging. IEEE Transactions on Biomedical Engineering, 57 (5). pp. 1003-1007. ISSN 0018-9294 (doi:10.1109/TBME.2009.2038788)

lateral displacement

layout and modeling

LDV

Andrews, D. G. H. (1979) The measurement of the velocities of particles in an air-solid flow. PhD thesis, Thames Polytechnic.

lead

lead-free

Durairaj, R., Man, Lam Wai, Ekere, N.N. and Mallik, S. (2010) The effect of wall-slip formation on the rheological behaviour of lead-free solder pastes. Materials and Design, 31 (3). pp. 1056-1062. ISSN 0261-3069 (doi:10.1016/j.matdes.2009.09.051)

lead-free solder

lead-free solder paste

Durairaj, R., Ramesh, S., Mallik, S., Seman, A. and Ekere, N. (2009) Rheological characterisation and printing performance of Sn/Ag/Cu solder pastes. Materials and Design, 30 (9). pp. 3812-3818. ISSN 0261-3069 (doi:10.1016/j.matdes.2009.01.028)

lead-free solder pastes

lead-free soldering

Bernasko, P.K., Mallik, S., Ekere, N.N., Seman, A. and Tayki, G. (2010) Effect of reflow profile and thermal cycle ageing on the intermetallic formation and growth in lead-free soldering. In: Electronics Packaging Technology. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 986-990. ISBN 978-1-4244-5100-5 (electronic), 978-1-4244-5099-2 (print) (doi:10.1109/EPTC.2009.5416398)

lean environment

Berkhauer-Smith, Samantha (2009) The integration of lean thinking and manufacturing business improvement methods within the aerospace supply chain. PhD thesis, University of Greenwich.

lean manufacture

Berkhauer-Smith, Samantha (2009) The integration of lean thinking and manufacturing business improvement methods within the aerospace supply chain. PhD thesis, University of Greenwich.

learning

Chi, Xuesong (2008) A web-based intelligent learning environment for the teaching of industrial continuous quality improvement. PhD thesis, University of Greenwich.

Least mean square (LMS)

least mean squares (LMS) algorithm

lesion classification

lesions

life cycle

life prediction

life-cycle

life-cycle material breakdown

lighting system

Khosrowshahi, Farzad and Alani, Amir (2011) Visualisation of impact of time on the internal lighting of a building. Automation in Construction, 20 (2). pp. 145-154. ISSN 0926-5805 (Print) (doi:10.1016/j.autcon.2010.09.012)

linear antenna arrays

linear visco-elastic

linearisation

linearity

liquefaction

liquid characterisation

liquid measurement

literature review

Berkhauer-Smith, Samantha (2009) The integration of lean thinking and manufacturing business improvement methods within the aerospace supply chain. PhD thesis, University of Greenwich.

LMS

load flow

load-displacement relationship

Xiao, Nan and Chen, Hua Peng (2011) Theoretical prediction on the shear capacities of shear connectors in steel column bases. Advances in Structural Engineering, 14 (5). pp. 953-966. ISSN 1369-4332 (doi:10.1260/1369-4332.14.5.953)

localized malignant lesion

location tracking

log-map

loss measurement

lysimeters

m-commerce

Arami, Mitra, Meyer, David and Sester, Antje (2005) Key factors for a better understanding of Mobile Java Games customers. In: Wirtschaftsinformatik 2005: eEconomy, eGovernment, eSociety. Physica-Verlag / Springer, Heidelberg, Germany, pp. 351-370. ISBN 978-3-7908-1624-2 (doi:10.1007/3-7908-1624-8_19)

machining

maintenance

Li, Chun-Qing and Shao, L. (2007) Reliability based asset management strategy for concrete infrastructure. International Journal of Materials and Structural Reliability, 5 (1). pp. 13-28.

maintenance & inspection

maintenance strategy

Li, Chun-Qing, Mackie, Robert Ian and Lawanwisut, Wimon (2007) A risk-cost optimized maintenance strategy for corrosion-affected concrete structures. Computer-Aided Civil and Infrastructure Engineering, 22 (5). pp. 335-346. ISSN 1093-9687 (doi:10.1111/j.1467-8667.2007.00490.x)

malware

management knowledge

MANET

manufactures

Angulo Pinzon, Oscar Andres (2012) Modelling of dosator filling and discharge. PhD thesis, University of Greenwich.

manufacturing

Berkhauer-Smith, Samantha (2009) The integration of lean thinking and manufacturing business improvement methods within the aerospace supply chain. PhD thesis, University of Greenwich.

Gao, James and Baxter, David (2008) Editorial for the special issue of RCIM for ICMR2005: Third International Conference on Manufacturing Research, Cranfield University, September 6th–9th 2005, Cranfield, UK. Robotics and Computer-Integrated Manufacturing, 24 (4). pp. 499-500. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.001)

manufacturing and cost evaluation

manufacturing business improvements

manufacturing information systems

manufacturing knowhow

manufacturing knowledge

manufacturing operations

manufacturing processes

Burnett, Anthony John (1996) The use of laboratory erosion tests for the prediction of wear in pneumatic conveyor bends. PhD thesis, University of Greenwich.

MAP algorithms

marine

marine engineers

marketing

Markov processes

MARS System

masonry arches

mass flux

Woodhead, Stephen Robert (1992) The measurement of particle velocity and suspension density in pneumatic coal injection systems. PhD thesis, University of Greenwich.

mass production

material

material analysis

Carter, R.M., Krabicka, Jan, Yan, Y. and Cornwell, S. (2009) An integrated instrumentation system for combustion plant optimisation. pp. 780-784. (doi:10.1109/IMTC.2009.5168556)

material modelling

materials

Burnett, Anthony John (1996) The use of laboratory erosion tests for the prediction of wear in pneumatic conveyor bends. PhD thesis, University of Greenwich.

materials handling equipment

Burnett, A. J. (1993) Wear in pneumatic conveying pipelines. Powder Handling and Processing, 15 (2). pp. 123-128. ISSN 0934-7348

materials science

Dyroy, Are (2006) Quantification and mitigation of segregation in the handling of alumina in aluminium production. PhD thesis, University of Greenwich.

mathematical algorithms

Qureshi, Athar (2011) Adaptive signal combining and detection in cooperative wireless networks. PhD thesis, University of Greenwich.

mathematical modelling

Tee, Kong-Fah, Christopher, C.J., James, M.N. and Patterson, E.A. (2007) New insights into plasticity-induced crack tip shielding via mathematical modelling and full field photoelasticity. In: 10th International Conference on the Mechanical Behavior of Materials (ICM), 27-31 May 2007, Busan, Korea. (Unpublished)

mathematical models

Burnett, A. J. (1993) Wear in pneumatic conveying pipelines. Powder Handling and Processing, 15 (2). pp. 123-128. ISSN 0934-7348

maximum dry density

maximum entropy

maximum-likelihood estimation

maximum-likelihood sequence detection

mcro- and nano-electromechanical systems (MEMS/NEMS) and devices

Prest, M.J., Wang, Y., Huang, F. and Lancaster, M.J. (2008) Silicon comb-drive actuators for low-temperature tuning of superconducting microwave circuits. Journal of Micromechanics and Microengineering, 18 (12). p. 125003. ISSN 0960-1317 (Print), 1361-6439 (Online) (doi:10.1088/0960-1317/18/12/125003)

measured flow properties

measured results

measurement

mechanical behaviour of materials

mechanical engineering

Li, Ji (2007) A study of the solid particle erosion performance of automative and other novel low carbon steels. PhD thesis, University of Greenwich.

mechanical properties

Alani, Amir M. and Beckett, Derrick (2013) Mechanical properties of a large scale synthetic fibre reinforced concrete ground slab. Journal of Construction and Building Materials, 41. pp. 335-344. ISSN 0950-0618 (doi:10.1016/j.conbuildmat.2012.11.043)

mechanical properties of materials

media access control

medical and patient monitoring

medical product development

meeting capture

MERGE project

message authentication

message authentication code

message authentication code (MAC)

metaknowledge

metaknowledge ontology

Gao, James, Bradfield, Daniel J. and Soltan, Hossein (2007) Development of a tool to support the dissemination of information about knowledge in multilingual product development teams. In: Proceedings of the International conference on product lifecycle management: assessing the industrial relevance. Inderscience Enterprises Ltd, Genva Aeroport, pp. 261-270. ISBN 9780907776321

metal matrix composites

metal target

metal waveguide

metallization

metallurgy

Mallik, Sabuj (2009) Study of the time-dependent rheological behaviour of lead-free solder pastes and flux mediums used for flip-chip assembly applications. PhD thesis, University of Greenwich.

methods for design of hoppers

Bradley, Michael, Berry, Robert and Farnish, Richard (2011) Methods for design of hoppers. Silos, bins and bunkers for reliable gravity flow, for pharmaceutical, food, mineral and other applications. In: BulkSolids India 2011, 6-8 April 2011, Mumbai, India. (Unpublished)

Micro-CHP

micro-generation

micro-grids

micro-physical parametrizations

micro-pipettes

micro-sources

microCHP emission

microelectronic circuits

microelectronics

microelectronics reliability

microgeneration source

microgeneration sources

microgenerator

microgrid

microgrids

micromachining

Wang, Yi, Ke, Maolong, Lancaster, Michael J. and Chen, Jian (2011) Micromachined 300-GHz SU-8-based slotted waveguide antenna. IEEE Antennas and Wireless Propagation Letters, 10. pp. 573-576. ISSN 1536-1225 (doi:10.1109/LAWP.2011.2158285)

microscopy

microstructure

microsystems

Durairaj, Rajkumar (2006) Rheological characterisation of solder pastes and isotropic conductive adhesives (ICAs) for microsystems assembly technology. PhD thesis, University of Greenwich.

microwave

microwave breast screening

microwave cavity perturbation

Dobson, R., Wu, R. and Callaghan, P. (2012) Blood glucose monitoring using microwave cavity perturbation. Electronics Letters, 48 (15). pp. 905-906. ISSN 0013-5194 (doi:10.1049/el.2012.1811)

microwave circuits

microwave filters

microwave imaging

millimeter-wave devices

millimeter-wave waveguides

MIMO

MIMO channel capacity

Rapajic, Predrag, Kennedy, Rodney A. and Krusevac, Snezana M. (2007) Effect of signal and noise mutual coupling on MIMO channel capacity. Wireless Personal Communications, 40 (3). pp. 317-328. ISSN 0929-6212 (doi:10.1007/s11277-006-9193-8)

mimo configurations

MIMO OFDM

MIMO radar

MIMO relay channels

Rapajic, Predrag and Kanakis, Triantafyllos (2008) MIMO relay channels with partial channel knowledge/estimation error and spatial correlation. In: Proceedings of the 1st International Conference on Signal Processing and Telecommunication Systems ICSPCS'2007 Australia, Gold Coast December 17-19, 2007. DSP for Communication Systems, Tarrawanna, New South Wales, Australia, pp. 43-47. ISBN 9780975693445

MIMO Systems

Eneh, Titus Ikechukwu (2011) Adaptive MMSE multiuser receivers in MIMO OFDM wireless communication systems. PhD thesis, University of Greenwich.

MIMO wireless communication systems

MIMO-OFDM systems

mine railway safety

van Manen, P. (1984) The dynamic behaviour of rail vehicles operating at high speeds for manriding in British coal mines. PhD thesis, Thames Polytechnic.

mineral processing

Farnish, Richard (2010) Tackling powder handling problems. Industrial Minerals. pp. 59-60.

miniaturization

minimum phase overall impulse response

ML detections

MMSE

MMSE decision feedback equalizer

Oletu, G., Rapajic, P., Eneh, T. and Anang, K. (2011) Performance of iterative decoding with imperfect MMSE DFE. Wireless Days. pp. 1-3. ISSN 2156-9711 (doi:10.1109/WD.2011.6098137)

MMSE-MUD

mobile ad hoc network

mobile ad hoc networks

mobile agents

mobile communication system

mobile communication systems

mobile entertainment

Mobile Java Games

mobile networks

mobile technology

Dickinger, Astrid, Arami, Mitra and Meyer, David (2006) Reconsidering the adoption process: enjoyment and social norms — antecedents of hedonic mobile technology use. In: Proceedings of the 39th Annual Hawaii International Conference on System Sciences, 2006. IEEE Xplore, Piscataway, NJ, USA, 23a-23a. ISBN 0-7695-2507-5 ISSN 1530-1605 (doi:10.1109/HICSS.2006.410)

mobility cognitive radios

Durowoju, Olasunkanmi, Arshad, Kamran and Moessner, Klaus (2012) Distributed power control algorithm for cognitive radios with primary protection via spectrum sensing under user mobility. Ad Hoc Networks, 10 (5). pp. 740-751. ISSN 1570-8705 (doi:10.1016/j.adhoc.2011.02.005)

modal analysis

modal mass

mode matching analysis

mode shape expansion

Chen, Hua Peng (2010) Mode shape expansion using perturbed force approach. Journal of Sound and Vibration, 329 (8). pp. 1177-1190. ISSN 0022-460X (doi:10.1016/j.jsv.2009.10.027)

model

model uncertainty

model updating

modeling

modeling processes

modelling

Fei, Genyuan (2011) A methodology for engineering design change analysis using system modelling and knowledge management technologies. PhD thesis, University of Greenwich.

modelling-mathematical

Burnett, A. J. (1993) Wear in pneumatic conveying pipelines. Powder Handling and Processing, 15 (2). pp. 123-128. ISSN 0934-7348

modes of operation

moisture

moisture migration

Moore-Penrose pseudo inverse

morphology-dependent backscatter signature

morphology-dependent UWB microwave backscatter

mortar

moulding sand

MPSK

MUD

mulation experiments

multi criteria analysis

AL-Shawabkeh, Abdallah and Tambyrajah, Antony (2009) Knowledge management in Jordanian banks. International Journal of Knowledge, Culture and Change Management, 9 (9). pp. 105-124. ISSN 1447-9524

multi hop data relays

multi-agent

multi-agent system technology

multi-antenna communication systems

Krusevac, Snezana M., Rapajic, Predrag and Kennedy, Rodney A. (2006) Mutual coupling effect on thermal noise in multi-element antenna systems. Progress in Electromagnetics Research, 59. pp. 325-333. ISSN 1070-4698 (doi:10.2528/PIER05091103)

multi-antenna receiver adaptive signal combining

multi-antenna wireless communication

multi-cell

multi-component gas mixture measurements

multi-user

multi-user communication

Balasubramanyam, Ramkumar (2008) Adaptive iterative multiuser detection for wireless communication systems. PhD thesis, University of Greenwich.

multi-user receivers

multiagent systems

multiband antennas

Callaghan, Peter and Batchelor, John C (2008) Dual-band pin-patch antenna for wi-fi applications. IEEE Antennas and Wireless Propagation Letters, 7. pp. 757-760. ISSN 1536-1225 (doi:10.1109/LAWP.2008.2004885)

multiband filters

multicarrier

Eneh, Titus Ikechukwu (2011) Adaptive MMSE multiuser receivers in MIMO OFDM wireless communication systems. PhD thesis, University of Greenwich.

multidisciplinary collaborations

multilingual

multipath and inter-channel interference

multipath channels

multiple ad hoc networks

multiple antennas

multiple input multiple output broadcast channels (MIMO BC)

multiple tier co-channel interference

multiple-input multiple-output (MIMO)

multiple-output orthogonal frequency division multiplexing systems

multiple-passband filters

multiple-symbol differential detection

multiple-symbol differential M-phase shift keying

multiuser detection

multiuser detection and decoding

multiuser detection scheme

multiuser interference

Muskhelishvili

mutual coupling

mutual information

mutual information (MI)

mutual information performance analysis

mutually supported elements

nanotechnology

natural flow regime

NDT

negative impedance compensation

negative Poisson's ratio

network performance analysis

network topology

network worm

neural networks

Chi, Xuesong (2008) A web-based intelligent learning environment for the teaching of industrial continuous quality improvement. PhD thesis, University of Greenwich.

new product design

new product development

Jian, Guo (2011) Knowledge search for new product development: a multi-agent based methodology. PhD thesis, University of Greenwich.

Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.

new product introduction

new solder paste formulation

Newton's recursion method

Newton’s recursion base LMS

NIST cipher block chaining MAC standard

noise signals

Amadi-Echendu, J.E. and Woodhead, Steve (1995) Characterising noise signals in 2-phase solid gas flows. In: 1995 IEEE Instrumentation and Measurement Technology. Institute of Electrical and Electronics Engineers, New York, pp. 778-781. ISBN 978-0780326156 (doi:10.1109/IMTC.1995.515422)

noise variances

non-destructive testing

non-invasive measurement

Carter, R.M., Krabicka, Jan, Yan, Y. and Cornwell, S. (2009) An integrated instrumentation system for combustion plant optimisation. pp. 780-784. (doi:10.1109/IMTC.2009.5168556)

non-orthogonality

normalized mode shape

novel channel model

novel tetrachiral honeycomb

Tee, Kong-Fah, Spadoni, A., Scarpa, F. and Ruzzene, M. (2008) Vibroacoustics and wave propagation of novel chiral honeycombs. Proceedings of SPIE: Advanced Materials and Structures, 6928, 69280J. ISSN 0277-786X (doi:10.1117/12.776075)

nozzles

NPD

Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.

numerical analysis

numerical example

object oriented environment

Wetherall, Jodie (2010) Investigation into an improved modular rule-based testing framework for business rules. PhD thesis, University of Greenwich.

objects

OFDM

OFDM Systems

Eneh, Titus Ikechukwu (2011) Adaptive MMSE multiuser receivers in MIMO OFDM wireless communication systems. PhD thesis, University of Greenwich.

office buildings

oil tanks

olivine sand

on-body propagation

on-line computer control

ontology

Aziz, Hayder, Li, Zhengxi and Gao, James (2008) Engineering design knowledge management in de-centralised virtual enterprises. Computer Aided Design and Applications, 5 (6). pp. 787-800. ISSN 1686-4360 (doi:10.3722/cadaps.2008.787-800)

operation sequencing

operational modal analysis

OPNET

optical arrays

optical fiber cables

optical fiber networks

optically fed phase

optimisation

optimization

Li, Chun-Qing and Shao, L. (2007) Reliability based asset management strategy for concrete infrastructure. International Journal of Materials and Structural Reliability, 5 (1). pp. 13-28.

optimized network

optimum adaptive signal combining

optimum moisture content

optimum signal combining

orders of magnitude

organisational characteristics

organizational knowledge-based system

organizational learning

orthotics

out-gassing phenomenon

outburst flood

overtopping

packaging

parameter estimation

part-loading

partial channel state information

partial knowledges

particle adhesion

particle degradation

particle dynamics

particle impact

particle size

particle size analysis

particle size distribution

Abou-Chakra, H., Tüzün, Ugur, Bridle, Ian, Leaper, M.C., Bradley, Michael S.A. and Reed, Alan R. (2003) Assessing the potential of a fine powder to segregate using laser diffraction and sieve particle size measuring techniques. Advanced Powder Technology, 14 (2). pp. 167-176. ISSN 0921-8831 (doi:10.1163/156855203763593967)

particle size measurement

particle spin

particle velocity

Andrews, D. G. H. (1979) The measurement of the velocities of particles in an air-solid flow. PhD thesis, Thames Polytechnic.

particle velocity profiles

particles

Durairaj, Rajkumar, Ekere, Ndy, Salam, B., Jackson, G. and He, Da (2003) Monte Carlo study of solder paste microstructure and ultra-fine-pitch stencil printing. Journal of Materials Science: Materials in Electronics, 14 (8). pp. 501-506. ISSN 0957-4522 (doi:10.1023/A:1023929119055)

particulate charging

particulate clay

particulate material

particulate materials

particulate matter

Passive ventilation

Patagonia

path loss

Pb-free solder

Amalu, E.H., Lau, W.K., Ekere, N.N., Bhatti, R.S., Mallik, S., Otiaba, K.C. and Takyi, G. (2011) A study of SnAgCu solder paste transfer efficiency and effects of optimal reflow profile on solder deposits. Microelectronic Engineering, 88 (7). pp. 1610-1617. ISSN 0167-9317 (doi:10.1016/j.mee.2011.02.104)

peer-to-peer

performance analyses

performance improvements

periodic boundary conditions

permeability evolutionary computing

personal area networks

Personal Communication Service (PCS 1900) band

personalised health care

perturbation-theory

Chen, Hua-Peng (2006) Efficient methods for determining modal parameters of dynamic structures with large modifications. Journal of Sound and Vibration, 298 (1-2). pp. 462-470. ISSN 0022-460X (doi:10.1016/j.jsv.2006.06.002)

perturbed force approach

Chen, Hua Peng (2010) Mode shape expansion using perturbed force approach. Journal of Sound and Vibration, 329 (8). pp. 1177-1190. ISSN 0022-460X (doi:10.1016/j.jsv.2009.10.027)

Pervasive computing

pervasive networks

pharmaceutical industry

pharmaceutical innovation

pharmaceutical powders

phased arrays

photodiodes

photoelastic modelling

photoelasticity

Tee, Kong-Fah, Christopher, C.J., James, M.N. and Patterson, E.A. (2007) New insights into plasticity-induced crack tip shielding via mathematical modelling and full field photoelasticity. In: 10th International Conference on the Mechanical Behavior of Materials (ICM), 27-31 May 2007, Busan, Korea. (Unpublished)

piezosensors

pilot-symbol-assisted modulation

pin-loaded patches

pipe fluid mechanics

Mason, David John (1991) A study of the modes of gas-solids flow in pipelines. PhD thesis, Thames Polytechnic.

pipejaking process

pipelines

Burnett, A. J. (1993) Wear in pneumatic conveying pipelines. Powder Handling and Processing, 15 (2). pp. 123-128. ISSN 0934-7348

pipes

Kessel, Stephen Ronald (1985) The interaction between rotary valves and pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

plan do check acts

plasma physics

plasma-treated hot air solder level (HASL)

plastic enclave

plasticity

plasticity-induced closure

Tee, Kong-Fah, Christopher, C.J., James, M.N. and Patterson, E.A. (2007) New insights into plasticity-induced crack tip shielding via mathematical modelling and full field photoelasticity. In: 10th International Conference on the Mechanical Behavior of Materials (ICM), 27-31 May 2007, Busan, Korea. (Unpublished)

Plaxis 3D Tunnel Program

PLM

Plytron

pneumatic conveying

Mason, David John (1991) A study of the modes of gas-solids flow in pipelines. PhD thesis, Thames Polytechnic.

pneumatic conveying pipelines

Bradley, M.S.A., Burnett, A.J. and Woodhead, Steve (1995) Measurement of pressure profiles in pneumatic conveying pipelines. In: 1995 IEEE Instrumentation and Measurement Technology. Institute of Electrical and Electronics Engineers, New York, pp. 766-769. ISBN 978-0780326156 (doi:10.1109/IMTC.1995.515419)

Burnett, A. J. (1993) Wear in pneumatic conveying pipelines. Powder Handling and Processing, 15 (2). pp. 123-128. ISSN 0934-7348

pneumatic conveying systems

Bradley, Michael, Farnish, Richard and Deng, Tong (2011) Predicting and preventing wear in pneumatic conveying systems. In: BulkSolids India 2011, 6-8 April 2011, Mumbai, India. (Unpublished)

Jones, Mark G. (1988) The influence of bulk particulate properties on pneumatic conveying performance. PhD thesis, Thames Polytechnic.

pneumatic conveyors

Burnett, A. J. (1993) Wear in pneumatic conveying pipelines. Powder Handling and Processing, 15 (2). pp. 123-128. ISSN 0934-7348

pneumatic machinery

Jones, Mark G. (1988) The influence of bulk particulate properties on pneumatic conveying performance. PhD thesis, Thames Polytechnic.

pneumatic materials handling equipment

pneumatic systems

Kessel, Stephen Ronald (1985) The interaction between rotary valves and pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

pneumatically conveyed solids

pocket machining

Poisson ratio

pollution

polynomial regression

polypropylene

positioning algorithm

posteriori

potential applications

potential systems

powder

powder characterisation

powder handling

Farnish, Richard (2010) Tackling powder handling problems. Industrial Minerals. pp. 59-60.

powder metallurgy

powder properties

powders

power adaptation

power azimuth-delay spectrum (PADS)

power azimuthal spectrum (PAS)

power control

power delay spectrum (PDS)

power electronics

power generation

Khan, Naushad Salim (2008) Handling characteristics of coal/biomass mixes: measurements and establishing benchmarks. PhD thesis, University of Greenwich.

power generation dispatch

power resources

power system control

power system operators

power systems

power-decaying pattern

power-routing

precoding and zeroforcing

predicting

Bradley, Michael, Farnish, Richard and Deng, Tong (2011) Predicting and preventing wear in pneumatic conveying systems. In: BulkSolids India 2011, 6-8 April 2011, Mumbai, India. (Unpublished)

prediction in ungauged basins

predictions

Amalu, Emeka Hyginus (2012) Modelling of the reliability of flip chip lead-free solder joints at high-temperature excursions. PhD thesis, University of Greenwich.

prefiltering method

pressure vessels

Kessel, Stephen Ronald (1985) The interaction between rotary valves and pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

prestressed concrete

Masroor, Ahmad (1983) Bond strength history in prestressed concrete reactor vessels. PhD thesis, Thames Polytechnic.

prestressing steel

preventing wear

Bradley, Michael, Farnish, Richard and Deng, Tong (2011) Predicting and preventing wear in pneumatic conveying systems. In: BulkSolids India 2011, 6-8 April 2011, Mumbai, India. (Unpublished)

principal component analysis (PCA)

printed circuit boards (PCBs)

printed circuits

printing

Mallik, Sabuj (2010) Rheological characterisation and modelling of electronic materials: time-dependent behaviours of lead-free solder pastes and flux mediums. LAP Lambert Academic Publishing GmbH & Co. KG, Saarbrücken, Germany. ISBN 978-3-8433-7771-3

printing performance

Mallik, Sabuj, Thieme, Jens, Bauer, R., Ekere, Ndy, Seman, Anton, Bhatti, Rajinderpal and Durairaj, Rajkumar (2010) Study of the rheological behaviour of Sn-Ag-Cu solder pastes and their correlation with printing performance. In: EPTC 2009 Proceedings of 2009 11th Electronics Packaging Technology Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 869-874. ISBN 978-1-4244-5099-2 (Print), 978-1-4244-5100-5 (e-ISBN) (doi:10.1109/EPTC.2009.5416423)

printing processes

prior information

probabilistic approach

probability

probability theory

Moorman, John Everard (2005) A method for the probabilistic method assessment of structures containing defects. PhD thesis, University of Greenwich.

probes

problem solving

process computer control

process control

process improvement

process improvements

process time

processing technology

product

product data management

product design process

Fei, Genyuan (2011) A methodology for engineering design change analysis using system modelling and knowledge management technologies. PhD thesis, University of Greenwich.

product designers

product development

Gao, James and Baxter, David (2007) Enabling technologies and frameworks for new product development: a selection of papers from ICMR2005. International Journal of Production Research, 45 (7). pp. 1485-1487. ISSN 0020-7543 (doi:10.1080/00207540600942201)

product development integration architecture

product development process

Jian, Guo (2011) Knowledge search for new product development: a multi-agent based methodology. PhD thesis, University of Greenwich.

product knowledge analysis

product life cycle management

product lifecycle management

product modelling

product planning

product service system

product-service systems

products and services

profit

programming and algorithm theory

project management courses

Arami, Mitra (2008) Introduction of project management courses at university: a case study. PM World Today, 10 (8).

project management education

Arami, Mitra (2008) Introduction of project management courses at university: a case study. PM World Today, 10 (8).

project success rate

proof of concept

prototypes

Ermis, Ertan (2011) Establishment of a repeatable test procedure for measuring adhesion strength of particulates in contact with surfaces. PhD thesis, University of Greenwich.

PSS

pulse amplifiers

pulse design

pulse shape

pulverised fuel

Carter, R.M., Krabicka, Jan, Yan, Y. and Cornwell, S. (2009) An integrated instrumentation system for combustion plant optimisation. pp. 780-784. (doi:10.1109/IMTC.2009.5168556)

Export as	RSS

About GALA

Browse Contents

Guide to Depositing in GALA

For Greenwich Depositing Authors

Quick Search on GALA

Search the University website

Items where School / Department / Research Groups is "School of Engineering"

(MME)

20kW bidirectional dual active bridge DC-DC converter prototype

a Decode-and-Forward (DF)

abrasives

accelerated temperature cycle (ATC)

access points

acoustic testing

acoustic wave propagation

activity theory

Ad-Hoc on demand distance vector

adaptive algorithm

adaptive algorithms

adaptive combining technique

adaptive detectors

adaptive equalizers

adaptive filter

adaptive filters

adaptive minimum mean square errors

adaptive MMSE

Adaptive Multiuser Detection

adaptive ordering

adaptive receiver

adaptive signal combining

adaptive systems

Adaptive Virtual Relaying MIMO (AV-RMIMO)

additive white Gaussian noise (AWGN)

adhesion

adhesion strength

adhesion testing methods

adhesives

advanced characterization

AEAD

AEAD mode

aerospace

aerospace energy storage applications

aerospace manufacturing

AES block-cipher

ageing

agent construction tools

agent technology

aggregate

aggregation

aggregation approach

air effect segregation

air induced segregation

air pollution

air-gaps

airborne particle concentration

airborne particles concentration

Al/SiC

algorithm

algorithms

all pass filter

aluminium

aluminium production

aluminum hydroxide

ambiguity function (AF)

amphoteric oxide

amplifier

amplify and forward

analysis and design methods

analytical results

and emulation

anisotropic elasticity

annular shear cell

annular wall friction tester

antenna

antenna array

antenna feeds

antenna measurements

antenna systems

anti-segmentation system

AODV