Skip navigation

Items where Faculty / Department / Research Groups is "School of Engineering"

Items where Faculty / Department / Research Groups is "School of Engineering"

Up a level
Export as [feed] RSS
Group by: Date | Creators | Item Type | Uncontrolled Keywords | No Grouping
Number of items at this level: 929.

Bates, Edward and Hills, Colin, (eds.) (2015) Stabilisation/Solidification of Contaminated Soil and Waste: A Manual of Practice. Hygge Media, Great Britain.

AL-Shawabkeh, Abdallah and Tambyrajah, Antony (2009) Knowledge management in Jordanian banks. International Journal of Knowledge, Culture and Change Management, 9 (9). pp. 105-124. ISSN 1447-9524

Abdalla, Mahmoud A., Karimian, Shokrollah and Hu, Zhirun (2014) Dual band spurious-free SIR metamaterial antenna. In: 2014 IEEE Antennas and Propagation Society International Symposium Proceedings. The Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1005-1006. ISBN 9781479935383 ISSN 1522-3965 (doi:10.1109/APS.2014.6904830)

Abou-Chakra, H., Tüzün, Ugur, Bridle, Ian, Leaper, M.C., Bradley, Michael and Reed, Alan (2003) Assessing the potential of a fine powder to segregate using laser diffraction and sieve particle size measuring techniques. Advanced Powder Technology, 14 (2). pp. 167-176. ISSN 0921-8831 (doi:10.1163/156855203763593967)

Aboutalebi, M., Banan, M.R. and Banan, M.R. (2010) Parametric study on the effect of burial depth on the surface explosion resistance of cylindrical concrete oil tanks. International Journal of Physical Sciences, 5 (1). 030-038. ISSN 1992-1950

Aboutalebi, Morteza and Nikkhouye Shirazi, Amin (2009) Comparison of the new zipper brace system behavior with inverted V-Brace in elastic zone in simple steel frames using the finite element method. In: APSEC-EACEF 2009, 4 - 6 Aug 2009, Langkawi, Malaysia. (Unpublished)

Abramovich, H., Burgard, M., Edery-Azulay, L., Evans, K. E., Hoffmeister, M., Miller, W., Scarpa, F., Smith, C. W., Tee, Kong-Fah, Schönecker, A. and Seffner, L. (2008) Sensing and actuation of smart chiral honeycombs. Proceedings of SPIE, 6935,. ISSN 0277-786X (doi:10.1117/12.775588)

Abramovich, H., Burgard, M., Edery-Azulay, Lucy, Evans, K.E., Hoffmeister, M., Miller, W., Scarpa, F., Smith, C.W. and Tee, Kong-Fah (2010) Smart tetrachiral and hexachiral honeycomb: sensing and impact detection. Composites Science and Technology, 70 (7). pp. 1072-1079. ISSN 0266-3538 (doi:10.1016/j.compscitech.2009.07.017)

Abu El-Ata, Monira (1980) A speech recognition system using Walsh analysis with a small computer. PhD thesis, Thames Polytechnic.

Abunku, Mbayer and Melis, Wim J.C. (2015) Modelling of a CHP system with electrical and thermal storage. In: 2015 50th International Universities Power Engineering Conference (UPEC). IEEE, pp. 1-5. ISBN 978‐1‐4673‐9682‐0 (doi:10.1109/UPEC.2015.7339926)

Adams, Ray and Keates, Simeon (2007) Accessibility research in a vocational context. In: Universal Acess in Human Computer Interaction. Coping with Diversity: Proceedings of the 4th International Conference on Universal Access in Human-Computer Interaction, UAHCI 2007, Part I. Lecture Notes in Computer Science, 4554 . Springer-Verlag, Heidelberg, pp. 575-583. ISBN 978-3-540-73278-5 ISSN 0302-9743 (doi:10.1007/978-3-540-73279-2_64)

Adekunle, A.A. and Woodhead, S.R. (2012) An AEAD cryptographic framework and TinyAEAD construct for secure WSN communication. In: Wireless Advanced (WiAd), 2012. IEEE Conference Publications . Institution of Electrical and Electronics Engineering, Inc., Piscataway, NJ, USA, pp. 1-5. ISBN 9781457721939 (doi:10.1109/WiAd.2012.6296560)

Adekunle, A.A. and Woodhead, S.R. (2009) On efficient data integrity and data origin authentication for wireless sensor networks utilising block cipher design techniques. In: Al-Begain, Khalid, (ed.) NGMAST 2009: the Third International Conference on Next Generation Mobile Applications, Services and Technologies. IEEE Computer Society Press, Cardiff, UK, pp. 419-424. ISBN 978-0-7695-3786-3 (doi:10.1109/NGMAST.2009.78)

Adekunle, A.A. and Woodhead, S.R. (2010) Zone based systems design framework for the realisation of efficient block cipher based message authentication code algorithms. In: ARES 2010 Fifth International Conference on Availability, Reliability, and Security15-18 February 2010 Krakow, Poland. Conference Publishing Services, IEEE Computer Society, Los Alamitos, California, pp. 216-221. ISBN 9781424458790 (doi:10.1109/ARES.2010.109)

Adekunle, A.A. and Woodhead, S.R. (2010) An efficient authenticated-encryption with associated-data block cipher mode for wireless sensor networks. In: Osipov, E., Kassler, A., Bohnert, Th.M. and Masip-Bruin, X., (eds.) Wired/Wireless Internet Communications. 8th International Conference, WWIC 2010, Lulea, Sweden, June 1-3, 2010. Proceedings. Lecture Notes in Computer Science (6074). Springer, Berlin / Heidelberg / NewYork, pp. 375-385. ISBN 978-3-642-13314-5 (doi:10.1007/978-3-642-13315-2_31)

Adekunle, A.A. and Woodhead, S.R. (2010) A resourceful combined block cipher mode of operation for packetised network communication. In: Proceedings - NGMAST 2010: 4th International Conference on Next Generation Mobile Applications, Services, and Technologies. IEEE Computer Society, Piscataway, USA, pp. 180-185. ISBN 9781424476497 (doi:10.1109/NGMAST.2010.44)

Adekunle, Andrew A. (2012) Design and analysis of light-weight symmetric cryptographic frameworks and constructs for secure packet mode wireless communication. PhD thesis, University of Greenwich.

Ahangar-Asr, A., Faramarzi, A. and Javadi, A. (2013) Modelling stress-strain behaviour of granular soils. In: Poromechanics V: Proceedings of the Fifth Biot Conference on Poromechanics. ASCE, Reston, VA, USA, pp. 1075-1081. ISBN 9780784412992 (doi:10.1061/9780784412992.128)

Ahangar-Asr, A., Faramarzi, A. and Javadi, A.A. (2010) An evolutionary numerical approach to modelling the mechanical properties of rubber concrete. In: Computing in Civil and Building Engineering, Proceedings of the International Conference (icccbe2010), Nottingham 30 June - 2 July. Nottingham University Press, Nottingham, UK. ISBN 9781907284601

Ahangar-Asr, A., Faramarzi, A., Mottaghifard, N. and Javadi, A.A. (2011) Modeling of permeability and compaction characteristics of soils using evolutionary polynomial regression. Computers & Geosciences, 37 (11). pp. 1860-1869. ISSN 0098-3004 (doi:10.1016/j.cageo.2011.04.015)

Ahangar-Asr, A., Javadi, A.A. and Faramarzi, A. (2012) Thermo-mechanical modelling of unsaturated soils using EPR. In: Proceedings of the 2012 eg-ice Workshop. Technische Universität München, Herrsching (Munich), Germany. ISBN 9783000384554

Ahangar-Asr, Alireza, Faramarzi, Asaad, Javadi, Akbar and Mottaghifard, Nasim (2011) An evolutionary approach to modelling compaction characteristics of soils. In: Proceedings of the 19th UK National Conference of the Association for Computational Mechanics in Engineering. Heriot-Watt University, Edinburgh, Scotland, UK, pp. 45-48. ISBN 9780956595119

Ahangar-Asr, Alireza, Faramarzi, Asaad and Javadi, Akbar A. (2010) A new approach for prediction of the stability of soil and rock slopes. Engineering Computations, 27 (7). pp. 878-893. ISSN 0264-4401 (doi:10.1108/02644401011073700)

Ahangar-Asr, Alireza, Faramarzi, Asaad, Javadi, Akbar A. and Giustolisi, Orazio (2011) Modelling mechanical behaviour of rubber concrete using evolutionary polynomial regression. Engineering Computations, 28 (4). pp. 492-507. ISSN 0264-4401 (doi:10.1108/02644401111131902)

Ajiboye, S. and Wang, Yi (2013) Investigation on the interfering effect of feeding network on the performance of a beamforming antenna array. In: AFRICON, 2013. IEEE, Pointe-Aux-Piments. ISBN 978-1-4673-5940-5 ISSN 2153-0025 (doi:10.1109/AFRCON.2013.6757744)

Akpoyomare, A. I. and Okereke, M. I. (2013) A virtual test-bed for the prediction of holistic effective elastic properties of UD composites. In: 19th International Conference on Composite Materials (ICCM19), 28 JUL 2013 - 2 AUG 2013, Montreal, Canada.

Al Mamun, Kazi Md. Abdullah and Zaman, Nafis Imtiaz (2010) Cooperative diversity performance of SISO relaying channel for mobile networks. In: Ninth International Symposium on Distributed Computing and Applications to Business Engineering and Science (DCABES), 2010. International Symposium on Distributed Computing and Applications to Business Engineering and Science . IEEE Xplore Digital Library, Piscataway, NJ, USA, pp. 249-253. ISBN 978-1-4244-7539-1 (doi:10.1109/DCABES.2010.57)

Alani, A., Kilic, G. and Aboutalebi, M. (2012) Applications of ground penetrating radar in bridge health monitoring using different frequency antennae systems. In: European Geosciences Union General Assembly, EGU2012, 22-27 Apr 2012, Vienna, Austria. (Unpublished)

Alani, A., MacMullen, J., Telik, O. and Zhang, Z.Y. (2011) Investigation into the thermal performance of recycled glass screed for construction purposes. Construction and Building Materials, 29. pp. 527-532. ISSN 0950-0618 (doi:10.1016/j.conbuildmat.2011.07.020)

Alani, Amir, Mahmoodian, Mojtaba, Romanova, Anna and Faramarzi, Asaad (2014) Advanced numerical and analytical methods for assessing concrete sewers and their remaining service life. In: ICACE 2014: International Conference on Advances in Civil Engineering, 19-20 Jun 2014, Venice, Italy. (Unpublished)

Alani, Amir M. and Aboutalebi, Morteza (2012) Analysis of the subgrade stiffness effect on the behaviour of ground-supported concrete slabs. Structural Concrete, 13 (2). pp. 102-108. ISSN 1464-4177 (Print), 1751-7648 (Online) (doi:10.1002/suco.201100043)

Alani, Amir M. and Aboutalebi, Morteza (2013) Mechanical properties of fibre reinforced concrete - comparative experimental study. International Journal of Civil, Architectural Science and Engineering, 7 (9). pp. 111-116.

Alani, Amir M., Aboutalebi, Morteza and Kilic, Gokhan (2013) Applications of ground penetrating radar (GPR) in bridge deck monitoring and assessment. Journal of Applied Geophysics, 97. pp. 45-54. ISSN 0926-9851 (doi:10.1016/j.jappgeo.2013.04.009)

Alani, Amir M., Aboutalebi, Morteza and Kilic, Gokhan (2013) Integrated health assessment strategy using NDT for reinforced concrete bridges. NDT & E International, 61. pp. 80-94. ISSN 0963-8695 (doi:10.1016/j.ndteint.2013.10.001)

Alani, Amir M., Aboutalebi, Morteza and Kiliç, Gökhan (2014) Applications of non-contact senor (IBIS-S) and finite element method in assessment of bridge deck structures. Structural Concrete, 15 (2). pp. 240-247. ISSN 1464-4177 (Print), 1751-7648 (Online) (doi:10.1002/suco.201200020)

Alani, Amir M., Aboutalebi, Morteza and King, Martin J. (2013) Influence of fibre content on crack propagation rate in fibre-reinforced concrete beams. International Journal of Civil, Architectural Science and Engineering, 7 (9). pp. 117-123.

Alani, Amir M. and Banks, Kevin (2014) Applications of ground penetrating radar in the Medway Tunnel - Inspection of structural joints. In: Proceedings of 2014 15th International Conference on Ground Penetrating Radar (GPR). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 461-464. ISBN 978-1-4799-6789-6 (doi:10.1109/ICGPR.2014.6970466)

Alani, Amir M. and Beckett, Derrick (2013) Mechanical properties of a large scale synthetic fibre reinforced concrete ground slab. Journal of Construction and Building Materials, 41. pp. 335-344. ISSN 0950-0618 (doi:10.1016/j.conbuildmat.2012.11.043)

Alani, Amir M., Faramarzi, Asaad, Mahmoodian, Mojtaba and Tee, Kong Fah (2014) Prediction of sulphide build-up in filled sewer pipes. Environmental Technology, 35 (14). pp. 1721-1728. ISSN 0959-3330 (Print), 1479-487X (Online) (doi:10.1080/09593330.2014.881403)

Alani, Amir M., Rizzuto, Joseph, Beckett, Derrick and Aboutalebi, Morteza (2014) Structural behaviour and deformation patterns in loaded plain concrete ground-supported slabs. Structural Concrete, 15 (1). pp. 81-93. ISSN 1464-4177 (Print), 1751-7648 (Online) (doi:10.1002/suco.201300043)

Alani, Amir Morteza, Aboutalebi, Morteza and Savytskyi, Mykola (2013) Finite element modelling of bridge structures based on non-destructive and non-contact assessment methods. In: Proceedings of the 11th International Scientific Conference in “Innovation Technologies of Life Cycle of Civil, Industrial and Transport Objects”, held 9 – 13 September 2013 in Yalta, Crimea (Ukraine). Prydniprovska State Academy of Civil Engineering and Architecture, Ukraine, Dnipropetrovsk, Ukraine, pp. 18-33.

Alani, Morteza and Faramarzi, Asaad (2013) Modelling degradation of concrete subject to sulphuric acid attack. In: Proceedings of the International Conference on Computational Mechanics, Durham, UK, 25-27 March 2013, CM13. University of Durham, School of Engineering, Durham, UK. ISBN 978-0953555840

Alfieri, Felice, Gunning, Peter, Gallo, Michela, Del Borghi, Adriana and Hills, Colin (2012) Monitoring of carbon dioxide uptake in accelerated carbonation processes applied to air pollution control residues. In: Proceedings of ECOS 2012 - The 25th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems. Firenze University Press, Perugia, Italy, pp. 205-217. ISBN 978-88-6655-322-9

Ali, M Tanseer and Wu, Ruiheng (2014) Design of RF amplifier with enhanced performance. In: IEEE 57th International Midwest Symposium on Circuits and Systems (MWSCAS), 3-6 August 2014, Texas A&M University, College Station, TX US. (doi:10.1109/MWSCAS.2014.6908480)

Ali, M. T., Wu, Ruiheng, Callaghan, P. and Rapajic, P. (2011) Experimental study of a highly linear amplifier using negative impedance compensation technique. In: Proceedings of the Active RF Devices, Circuits and Systems Seminar. IET Conference Publications . Institution of Engineering and Technology, London, UK, pp. 35-38. ISBN 978-1-84919-540-9 (Online) (Unpublished) (doi:10.1049/ic.2011.0211)

Ali, M. Tanseer and Wu, Ruiheng (2014) Design of RF amplifier with enhanced performance. In: 2014 IEEE 57th International Midwest Symposium on Circuits and Systems (MWSCAS). Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 575-578. ISBN 978-1-4799-4134-6 ISSN 1548-3746 (doi:10.1109/MWSCAS.2014.6908480)

Ali, M. Tanseer, Wu, Ruiheng, Callaghan, Peter and Rapajic, Predrag (2011) Design of a highly linear high frequency amplifier using Volterra model. In: Microwave, Antenna, Propagation, and EMC Technologies for Wireless Communications (MAPE). Microwave, Antenna, Propagation, and EMC Technologies for Wireless Communications (MAPE) . Institute of Electrical and Electronic Engineers, Pistacaway, USA, pp. 355-358. ISBN 978-1-4244-8268-9 (doi:10.1109/MAPE.2011.6156259)

Ali, M. Tanseer, Wu, Ruiheng, Callaghan, Peter and Rapajic, Predrag (2014) Highly linear RF amplifier design: theoretical analysis and experimental study. International Journal of Electronics, 101 (1). pp. 98-112. ISSN 0020-7217 (Print), 1362-3060 (Online) (doi:10.1080/00207217.2013.769189)

Ali, M. Tanseer, Wu, Ruiheng, Mao, Luhong, Callaghan, Peter and Rapajic, Predrag (2014) High frequency CMOS amplifier with improved linearity. IET Circuits, Devices & Systems, 8 (6). pp. 450-458. ISSN 1751-858X (Print), 1751-8598 (Online) (doi:10.1049/iet-cds.2013.0327)

Alnwaimi, Ghassan, Arshad, Kamran and Moessner, Klaus (2009) Collaborative spectrum sensing in OFDM-based cognitive radio. In: Proceedings 2009 First UK-India International Workshop on Cognitive Wireless Systems (UKIWCWS). Institution of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA. ISBN 9781457701825 (doi:10.1109/UKIWCWS.2009.5749395)

Alnwaimi, Ghassan, Arshad, Kamran and Moessner, Klaus (2011) Dynamic spectrum allocation algorithm with interference management in co-existing networks. IEEE Communications Letters, 15 (9). pp. 932-934. ISSN 1089-7798 (doi:10.1109/LCOMM.2011.062911.110248)

Alnwaimi, Ghassan, Arshad, Kamran and Moessner, Klaus (2011) Dynamic spectrum allocation algorithm with interference management in displaced networks. In: The 7th International Wireless Communications & Mobile Computing Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 941-946. ISBN 9781424495399 (doi:10.1109/IWCMC.2011.5982528)

Aly, M.G. and Wang, Yi (2013) An integrated narrowband-wideband antenna. In: 2013 Loughborough Antennas & Propagation Conference (LAPC). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 433-435. ISBN 9781479900916 (doi:10.1109/LAPC.2013.6711936)

Amadi-Echendu, J.E. and Woodhead, Steve (1995) Characterising noise signals in 2-phase solid gas flows. 1995 IEEE Instrumentation and Measurement Technology. Institute of Electrical and Electronics Engineers, New York, pp. 778-781. ISBN 978-0780326156 (doi:10.1109/IMTC.1995.515422)

Amalu, E.H, Ekere, N.N. and Aminu, G. (2011) Effects of inter-metallic compound on high temperature reliability of flip chip interconnects for fine pitch applications. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 208-213. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145173)

Amalu, E.H., Ekere, N.N. and Bhatti, R.S. (2010) High temperature electronics: R&D challenges and trends in materials, packaging and interconnection technology. In: 2nd International Conference on Adaptive Science & Technology, 2009. (ICAST 2009). Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 146-153. ISBN 978-1-4244-3522-7 ISSN 0855-8906 (doi:10.1109/ICASTECH.2009.5409731)

Amalu, E.H., Ekere, N.N., Bhatti, R.S., Mallik, S., Takyi, G. and Ibhadode, A.O.A. (2011) Numerical investigation of thermo-mechanical behaviour of ball grid array solder joint at high temperature excursion. Advanced Materials Research, 367. pp. 287-292. ISSN 1662-8985 (Print), 1022-6680 (Online) (doi:10.4028/www.scientific.net/AMR.367.287)

Amalu, E.H., Lau, W.K., Ekere, N.N., Bhatti, R.S., Mallik, S., Otiaba, K.C. and Takyi, G. (2011) A study of SnAgCu solder paste transfer efficiency and effects of optimal reflow profile on solder deposits. Microelectronic Engineering, 88 (7). pp. 1610-1617. ISSN 0167-9317 (doi:10.1016/j.mee.2011.02.104)

Amalu, Emeka H., Ekere, Ndy and Mallik, Sabuj (2011) Evaluation of rheological properties of lead-free solder pastes and their relationship with transfer efficiency during stencil printing process. Materials and Design, 32 (6). pp. 3189-3197. ISSN 0261-3069 (doi:10.1016/j.matdes.2011.02.045)

Amalu, Emeka H. and Ekere, Ndy N. (2011) High temperature reliability of lead-free solder joints in a flip chip assembly. Journal of Materials Processing Technology, 212 (2). pp. 471-483. ISSN 0924-0136 (doi:10.1016/j.jmatprotec.2011.10.011)

Amalu, Emeka H., Lui, Y.T., Ekere, Ndy, Bhatti, R.S. and Takyi, G. (2011) Investigation of the effects of reflow profile parameters on lead-free solder bump volumes and joint integrity. In: AIP Conference Proceedings. American Institute of Physics, Melville, NY, USA, pp. 639-644. (doi:10.1063/1.3552519)

Amalu, Emeka Hyginus (2012) Modelling of the reliability of flip chip lead-free solder joints at high-temperature excursions. PhD thesis, University of Greenwich.

Anang, K. A., Bello, L., Eneh, T. I., Bakalis, P. and Rapajic, P. B. (2012) The performance of dynamic source routing protocol to path loss models at carrier frequencies above 2 GHz. In: 2011 IEEE 13th International Conference on Communication Technology (ICCT). Institute of Electronic and Electrical Engineers, Inc., Piscataway, NJ, USA, pp. 151-155. ISBN 978-1-61284-306-3 (print) (doi:10.1109/ICCT.2011.6157852)

Anang, K.A., Rapajic, P.B., Bello, L. and Wu, R. (2012) Sensitivity of cellular wireless network performance to system & propagation parameters at carrier frequencies greater than 2 GHz. Progress In Electromagnetics Research B (PIER B), 40. pp. 31-54. ISSN 1937-6472 (doi:10.2528/PIERB12012303)

Anang, K.A., Rapajic, P.B., Eneh, T.I. and Bello, L. (2011) Sensitivity of information capacity of land mobile cellular system to propagation loss parameters at higher microwave frequencies. In: Wireless Communications and Mobile Computing Conference (IWCMC), 2011 7th International. Institute of Electrical and Electronic Engineers, Piscataway, NJ, USA, pp. 630-635. ISBN 978-1-4244-9539-9 (doi:10.1109/IWCMC.2011.5982619)

Anang, K.A., Rapajic, P.B., Eneh, T.I., Bello, L. and Oletu, G. (2012) Impact of vehicular traffic on information capacity of cellular wireless network at carrier frequencies greater than 3 GHz. In: 2011 Fifth UKSim European Symposium on Computer Modeling and Simulation (EMS). Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 430-434. ISBN 978-1-4673-0060-5 (doi:10.1109/EMS.2011.19)

Anang, K.A., Rapajic, P.B., Eneh, T.I. and Nijsure, Y. (2011) Minimum cell size for information capacity increase in cellular wireless network. In: Vehicular Technology Conference (VTC Spring), 2011 IEEE 73rd. Institute of Electrical and Electronic Engineers, Piscataway, NJ, USA. ISBN 978-1-4244-8332-7 ISSN 1550-2252 (doi:10.1109/VETECS.2011.5956350)

Anang, K.A., Rapajic, P.B., Eneh, T.I. and Oletu, G. (2011) Sensitivity of information capacity of land mobile cellular system to the base station antenna height at higher microwave frequencies. In: Computer Research and Development (ICCRD), 2011 3rd International Conference on. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 167-172. ISBN 978-1-61284-839-6 (doi:10.1109/ICCRD.2011.5764271)

Anang, K.A., Rapajic, P.B., Wu, Ruiheng, Bello, L. and Eneh, T.I. (2012) Cellular system information capacity change at higher frequencies due to propagation loss and system parameters. Progress In Electromagnetics Research B, 44. pp. 191-221. ISSN 1937-6472 (doi:10.2528/PIERB12080908)

Anang, Kwashie Amartei (2013) Minimum cell size for information capacity increase in cellular wireless network. PhD thesis, University of Greenwich.

Anderson, David and Benterkia, Zoubir (1991) Analysis of semi-rigid steel frames and criteria for their design. Journal of Constructional Steel Research, 18 (3). pp. 227-237. ISSN 0143974X (doi:10.1016/0143-974X(91)90027-X)

Andrews, D. G. H. (1979) The measurement of the velocities of particles in an air-solid flow. PhD thesis, Thames Polytechnic.

Angulo, O., Berry, R., Bradley, M. and Antonijevic, M. (2009) Modelling of a dosator: an analytical approach based on measured powder flow properties. Journal of Pharmacy and Pharmacology, 61 (S1). A123-A123. ISSN 0022-3573 (Print), 2042-7158 (Online) (doi:10.1211/002235709789037053)

Angulo Pinzon, O.A., Berry, R.J., Bradley, M.S and Antonijevic, M.D. (2009) Modelling of dosator operation for improved manufacturing performance. In: 2009 AAPS Annual Meeting and Exposition, 8-12 Nov 2009, Los Angeles, USA.

Angulo Pinzon, O.A., Berry, R.J., Bradley, M.S., Farnish, R.J. and Antonijevic, M.D. (2009) The impact of powder flowing properties on dosator filling system operation. In: 2009 AAPS Annual Meeting and Exposition, 8-12 Nov 2009, Los Angeles, USA.

Angulo Pinzon, O.A., Bradley, Michael, Berry, Robert and Farnish, Richard J. (2008) Modelling dosator filling and discharge of powder. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 586-591. ISBN 9788272062896

Angulo Pinzon, Oscar Andres (2012) Modelling of dosator filling and discharge. PhD thesis, University of Greenwich.

Arami, Mitra (2008) Introduction of project management courses at university: a case study. PM World Today, 10 (8).

Arami, Mitra, Meyer, David and Sester, Antje (2005) Key factors for a better understanding of Mobile Java Games customers. In: Ferstl, Otto K., Sinz, Elmar J., Eckertand, Sven and Isselhorst, Tilman, (eds.) Wirtschaftsinformatik 2005: eEconomy, eGovernment, eSociety. Physica-Verlag / Springer, Heidelberg, Germany, pp. 351-370. ISBN 978-3-7908-1624-2 (doi:10.1007/3-7908-1624-8_19)

Aravena, Jazmín E. and Dussaillant, Alejandro (2009) Storm-water infiltration and focused recharge modeling with finite-volume two-dimensional Richards equation: application to an experimental rain garden. Journal of Hydraulic Engineering, 135 (12). pp. 1073-1080. ISSN 0733-9429 (Print), 1943-7900 (Online) (doi:10.1061/(ASCE)HY.1943-7900.0000111)

Ariza-Zafra, K., Berry, R., Bradley, M.S.A. and Santana, J.C. (2010) Achieving mass flow in silos with shallow converging sections using inverted cones. Bulk Solids Handling (Whitepaper). ISSN 0173-9980

Ariza-Zafra, K., Berry, Robert and Bradley, Michael S. A. (2008) Review of models for predicting the discharge rates of bulk particulates from silos and bins. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 484-492. ISBN 9788272062896

Arokiam, A. C., Barashev, A. V., Bacon, D. J. and Osetsky, Y. N. (2007) Atomic-scale computer simulation study of the interaction of Cu-rich precipitates with irradiation-produced defects in α-Fe. Philosophical Magazine, 87 (6). pp. 925-943. ISSN 1478–6435 (Print), 1478–6443 (Online) (doi:10.1080/14786430601003908)

Arokiam, A. C., Barashev, A. V., Bacon, D. J. and Osetsky, Yu. N. (2006) Characteristics of the interaction of Cu-rich precipitates with irradiation-produced defects in α-Fe. Philosophical Magazine Letters, 85 (9). pp. 491-501. ISSN 0950–0839 (Print), 1362–3036 (Online) (doi:10.1080/09500830500300047)

Arshad, K. and Sheikh, A.U.H. (2004) Effect of doppler frequency on pilot arrangements in wireless OFDM systems. In: Proceedings of International Conference on Information and Communication Technologies: From Theory to Applications, 2004. IEEE, pp. 261-263. ISBN 0-7803-8482-2 (doi:10.1109/ICTTA.2004.1307726)

Arshad, Kamran (2014) Cognitive radio technology: Are licensed users really protected? In: Mobile Deployable Communications, 6-7 Feb 2014, Amsterdam, The Netherlands. (Unpublished)

Arshad, Kamran (2014) Cognitive radio: future of wireless communications. In: MilSatCom Latin America, 27-28 Aug 2014, Rio de Janeiro, Brazil. (Unpublished)

Arshad, Kamran (2009) Genetic algorithm based optimised collaborative spectrum sensing. In: Proceedings of the SDR ’09 Technical Conference and Product Exposition. SDR Forum.

Arshad, Kamran (2012) Interference mitigation in cognitive radio. In: International Workshop on Planning and Optimization of Wireless Networks, 24-25 Oct 2012, University of Bedfordshire (Luton), United Kingdom. (Unpublished)

Arshad, Kamran (2015) LTE system level performance in the presence of CQI feedback uplink delay and mobility. In: International Conference on Communications, Signal Processing, and their Applications (ICCSPA), 2015. IEEE, pp. 1-5. ISBN 978-1-4799-6532-8 (doi:10.1109/ICCSPA.2015.7081294)

Arshad, Kamran (2012) Malicious users detection in collaborative spectrum sensing using statistical tests. In: The Fourth International Conference on Ubiquitous and Future Networks (ICUFN 2012). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 109-113. ISBN 9781467313780 (doi:10.1109/ICUFN.2012.6261674)

Arshad, Kamran (2008) Opportunistic spectrum access for cognitive radio. In: Seminar on Opportunistic Spectrum Access for Cognitive Radio, 30 Dec 2008, GIFT University, Gujranwala, Pakistan. (Unpublished)

Arshad, Kamran (2010) Radio wave propagation modelling using finite element method: Novel approaches to model radio wave propagation and solve complex models efficiently using finite element analysis. LAP Lambert Academic Publishing. ISBN 9783843358019

Arshad, Kamran, Briggs, Keith and Moessner, Klaus (2011) Robust spectrum sensing based on statistical tests. In: Proceedings of the 4th International Conference on Cognitive Radio and Advanced Spectrum. ACM, New York, NY, USA. ISBN 9781450309127 (doi:10.1145/2093256.2093268)

Arshad, Kamran, Imran, Muhammad Ali and Moessner, Klaus (2010) Collaborative spectrum sensing optimisation algorithms for cognitive radio networks. International Journal of Digital Multimedia Broadcasting, 2010:424036. pp. 1-20. ISSN 1687-7578 (Print), 1687-7586 (Online) (doi:10.1155/2010/424036)

Arshad, Kamran, Katsriku, Ferdinand and Lasebae, Aboubaker (2007) Effects of different parameters on attenuation rates in circular and arch tunnels. PIERS Online, 3 (5). pp. 607-611. ISSN 1931-7360 (Print), 1931-7360 (Online) (doi:10.2529/PIERS060628070308)

Arshad, Kamran, Katsriku, Ferdinand and Lasebae, Aboubaker (2006) Finite element based beam propagation method for 3D wave propagation in troposphere. In: The 8th International Conference Advanced Communication Technology. ICACT 2006. Proceedings. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 2090-2094. ISBN 8955191294 ISSN 1738-9445 (doi:10.1109/ICACT.2006.206410)

Arshad, Kamran, Katsriku, Ferdinand and Lasebae, Aboubaker (2008) Modelling obstructions in straight and curved rectangular tunnels by finite element approach. Journal of Electrical Engineering, 59 (1). pp. 9-13. ISSN 1335-3632

Arshad, Kamran, Katsriku, Ferdinand and Lasebae, Aboubaker (2005) Propagation modelling in troposphere using paraxial form of Helmholtz equation. In: Microwave Conference Proceedings, 2005. APMC 2005. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA. ISBN 078039433X (doi:10.1109/APMC.2005.1606373)

Arshad, Kamran, Katsriku, Ferdinand and Lasebae, Aboubaker (2006) Radiowave VHF Propagation modelling in forest using finite elements. In: Proceedings of ICTTA'06. International Conference on Information & Communication Technologies: From Theory to Applications. Institute of Electrical and Electronics Engineers Inc., Piscataway, NJ, USA, pp. 2146-2149. ISBN 0-7803-9521-2 (doi:10.1109/ICTTA.2006.1684735)

Arshad, Kamran, Katsriku, Ferdinand and Lasebae, Aboubaker (2007) An investigation of wave propagation over irregular terrain and urban streets using finite elements. In: TELE-INFO'07 Proceedings of the 6th WSEAS International Conference on Telecommunications and Informatics. World Scientific and Engineering Academy and Society (WSEAS), Stevens Point, Wisconsin, USA, pp. 105-110. ISBN 8887776666554

Arshad, Kamran, Katsriku, Ferdinand and Lasebae, Aboubaker (2005) A new approach in modelling EM wave propagation in troposphere using finite elements. In: ELECTROSCIENCE'05 Proceedings of the 5th WSEAS International Conference on Applied Electromagnetics, Wireless and Optical Communications. World Scientific and Engineering Academy and Society (WSEAS), Stevens Point, Wisconsin, USA, pp. 31-36. ISBN 9608457343

Arshad, Kamran, MacKenzie, Richard, Celentano, Ulrico, Drozdy, Arpad, Leveil, Stéphanie, Mange, Geneviève, Rico, Juan, Medela, Arturo and Rosik, Christophe (2014) Resource management for QoS support in cognitive radio networks. IEEE Communications Magazine, 52 (3). pp. 114-120. ISSN 0163-6804 (doi:10.1109/MCOM.2014.6766095)

Arshad, Kamran and Moessner, Klaus (2009) Collaborative spectrum sensing for cognitive radio. In: 2009 IEEE International Conference on Communications Workshops ICC2009 Proceedings. Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA. ISBN 9781424434374 (doi:10.1109/ICCW.2009.5208032)

Arshad, Kamran and Moessner, Klaus (2009) Collaborative spectrum sensing: optimising the number of collaborating users. In: Proceedings 2009 First UK-India International Workshop on Cognitive Wireless Systems (UKIWCWS). Institution of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA. ISBN 9781457701825 (doi:10.1109/UKIWCWS.2009.5749394)

Arshad, Kamran and Moessner, Klaus (2009) Dynamic spectrum allocation between two UMTS operators to maximise spectrum opportunities. In: 12th International Symposium on Wireless Personal Multimedia Communications (WPMC’09), 7-10 Sep 2009, Sendai, Japan.

Arshad, Kamran and Moessner, Klaus (2011) Efficient spectrum management among spectrum sharing UMTS operators. In: 2011 IEEE 73rd Vehicular Technology Conference Proceedings. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA. ISBN 9781424483327 ISSN 1550-2252 (doi:10.1109/VETECS.2011.5956619)

Arshad, Kamran and Moessner, Klaus (2010) Fusion strategies for collaborative spectrum sensing. In: Second Annual European Reconfigurable Radio Technologies Workshop, 23-25 Jun 2010, Mainz, Germany. (Unpublished)

Arshad, Kamran and Moessner, Klaus (2010) Mobility driven energy detection based spectrum sensing framework of a cognitive radio. In: 2010 Second UK-India-IORC International Workshop on Cognitive Wireless Systems UKIWCWS 2010. Institution of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA. ISBN 9781424491476 (doi:10.1109/UKIWCWS.2010.5724224)

Arshad, Kamran and Moessner, Klaus (2009) Optimisation of collaborative spectrum sensing with SIMO cognitive terminals using genetic algorithm. In: 2009 IEEE 20th Personal, Indoor and Mobile Radio Communications Symposium. Institution of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1707-1711. ISBN 9781424451227 (doi:10.1109/PIMRC.2009.5449756)

Arshad, Kamran and Moessner, Klaus (2011) Robust collaborative spectrum sensing based on beta reputation system. In: 2011 Future Network & Mobile Summit [Conference Proceedings]. lIMC International Information Management Corporation Ltd., Dublin, Ireland. ISBN 9781905824250

Arshad, Kamran and Moessner, Klaus (2013) Robust collaborative spectrum sensing in the presence of deleterious users. IET Communications, 7 (1). pp. 49-56. ISSN 1751-8628 (Print), 1751-8636 (Online) (doi:10.1049/iet-com.2012.0082)

Arshad, Kamran and Moessner, Klaus (2013) Robust spectrum sensing based on statistical tests. IET Communications, 7 (9). pp. 808-817. ISSN 1751-8628 (doi:10.1049/iet-com.2012.0499)

Arshad, Kamran and Moessner, Klaus (2011) Statistical models of spectrum opportunities for cognitive radio. In: PIMRC'11: 2011 IEEE 22nd International Symposium on Personal, Indoor and Mobile Radio Communications. IEEE, Piscataw2ay, NJ, USA, pp. 2310-2314. ISBN 978-1-4577-1346-0 (doi:10.1109/PIMRC.2011.6139931)

Arshad, Kamran and Sheikh, Asrar U.H. (2004) Performance of wireless OFDM system channel estimation with different pilot patterns. In: Proceedings of the 2004 IEEE International Symposium on Spread Spectrum Techniques and Applications. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 179-183. ISBN 0780384083 (doi:10.1109/ISSSTA.2004.1371688)

Arshad, Kamran and Sheikh, Asrar U.H. (2004) A new method to combat with frequency offsets in wireless OFDM systems. In: 2004 IEEE Region 10 Conference. TENCON 2004. Institute of Electrical and Electronics Engineers Inc., Piscataway, NJ, USA, pp. 593-596. ISBN 0780385608 (doi:10.1109/TENCON.2004.1414665)

Ashcroft, A. D. C., Keates, S. and Clarkson, P. J. (2000) User capabilities and computer access. [Working Paper]

Ashley, Richard Martin (1980) Forces on cylinders in relative fluid motion. MPhil thesis, Thames Polytechnic.

Aziz, Hayder, Li, Zhengxi and Gao, James (2008) Engineering design knowledge management in de-centralised virtual enterprises. Computer Aided Design and Applications, 5 (6). pp. 787-800. ISSN 1686-4360 (doi:10.3722/cadaps.2008.787-800)

Aziza-Zafra, Karol (2010) A hat trick for coal handling. International Bulk Journal, 5. pp. 67-70. ISSN 0260-1087

Bagheri, A. and Mahmoodian, M. (2003) The effect of silica fume on strength and permeability of RCC mixes with low and medium paste content. Journal of School of Engineering, 15 (1). pp. 65-74. ISSN 1028-3080

Bagheri, A.R., Mahmoodian, M. and Fakhiri, M. (2006) The effect of curing method on properties of roller compacted concrete pavements (RCCP) with and without silica fume. Journal of Transportation Research, 3 (3). pp. 147-162. ISSN 1735-3459

Bakalis, P. S. and Ellis, J. E. (1989) Simulation of hierarchical control algorithms using a steady-state mathematical model of a vaporizer plant. Applied Mathematical Modelling, 13 (7). pp. 413-419. ISSN 0307-904X (doi:10.1016/0307-904X(89)90153-4)

Bakalis, P. S. and Ellis, J. E. (1992) The application of large-scale systems optimization control algorithms. Applied Mathematical Modelling, 16 (4). pp. 201-207. ISSN 0307-904X (doi:10.1016/0307-904X(92)90058-B)

Bakalis, P. S. and Ellis, J. E. (1995) The use of optimisation algorithms as an aid for determining process control configurations. In: Roberts, P. D. and Ellis, J. E., (eds.) Large Scale Systems: Postprint Volume from the 7th IFAC/IFORS/IMACS Symposium, London, UK, 11-13 July 1995: Theory and Applications, 1995. IPPV IFAC Postprint . Pergamon, pp. 333-338. ISBN 0080423655

Bakalis, Panos and Bello, Lawal (2010) Performance evaluation of CBR and TCP traffic models on MANET using DSR routing protocol. In: 2010 International Conference on Communications and Mobile Computing. IEEE Computer Society, Los Alamitos, CA, USA, pp. 318-322. ISBN 9780769539898 (doi:10.1109/CMC.2010.185)

Balasubramanyam, Ramkumar (2008) Adaptive iterative multiuser detection for wireless communication systems. PhD thesis, University of Greenwich.

Balasubramanyam, Ramkumar and Rapajic, Predrag B. (2008) Adaptive ‘imperfect’ decision feedback equalizer for a frequency selective communication channel. In: Wysocki, Beata J. and Wysocki, Tadeusz A., (eds.) Proceedings of the 1st International Conference on Signal Processing and Telecommunication Systems ICSPCS'2007 Australia, Gold Coast December 17-19, 2007. DSP for Communication Systems, Tarrawanna, New South Wales, Australia, pp. 503-507. ISBN 9780975693445

Ball, Les, Szymkowiak, Andrea, Keates, Simeon, Bradley, David and Brownsell, Simon (2013) eHealth and the internet of things. In: Proceedings of the 3rd International Conference on Pervasive Embedded Computing and Communication Systems. SCITEPRESS, Barcelona, Spain, pp. 139-142. ISBN 978-989-8565-43-3 (doi:10.5220/0004336701390142)

Barakat, Basel and Arshad, Kamran (2015) Energy efficient carrier aggregation for LTE-Advanced. In: 2015 IEEE 8th GCC Conference and Exhibition (GCCCE). IEEE, pp. 1-5. ISBN 978-1-4799-8422-0 (doi:10.1109/IEEEGCC.2015.7060066)

Barashev, A. V. and Arokiam, A. C. (2006) Monte Carlo modelling of Cu atom diffusion in α-Fe via the vacancy mechanism. Philosophical Magazine Letters, 86 (5). pp. 321-332. ISSN 0950-0839 (Print), 1362-3036 (Online) (doi:10.1080/09500830600788927)

Barletta, Diego, Berry, Robert J., Larsson, Sylvia H., Lestander, Torbjörn A., Poletto, Massimo and Ramírez-Gómez, Álvaro (2015) Assessment on bulk solids best practice techniques for flow characterization and storage/handling equipment design for biomass materials of different classes. Fuel Processing Technology, 138. pp. 540-554. ISSN 0378-3820 (doi:10.1016/j.fuproc.2015.06.034)

Bartlett, Debbie (2015) The implication of European health and safety regulations for the coppice sector. Quarterly Journal of Forestry. ISSN 0033-5568 (In Press)

Bastianon, E., Bertoldi, W. and Dussaillant, A. (2012) Glacial-lake outburst flood effects on Colonia River morphology, Chilean Patagonia. In: River Flow 2012. CRC Press / Taylor & Francis, London, UK, pp. 573-579. ISBN 978-0-415-62129-8 (doi:10.1201/b13250-88)

Bates, Edward and Hills, Colin (2015) Stabilisation and solidification of contaminated soil and waste: Science and practice. Hygge Media, Bury, UK. ISBN 9780993272943

Baxter, David, Doultsinou, Athanasia, Roy, Rajkumar and Gao, James (2010) A life cycle model for product-service systems design. In: 5th International Conference on Digital Enterprise Technology. Publibook, Paris, France, pp. 441-456.

Baxter, David, Gao, James, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2008) A framework to integrate design knowledge reuse and requirements management in engineering design. Robotics and Computer-Integrated Manufacturing, 24 (4). pp. 585-593. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.010)

Baxter, David, Rajkumar, Roy and Gao, James (2008) Design process knowledge reuse challenges and issues. Computer Aided Design and Applications, 5 (6). pp. 942-952. ISSN 1686-4360 (doi:10.3722/cadaps.2008.942-952)

Baxter, David, Roy, Rajkumar, Doultsinou, Athanasia, Gao, James and Kalta, Mohamad (2009) A knowledge management framework to support product-service systems design. International Journal of Computer Integrated Manufacturing, 22 (12). pp. 1073-1088. ISSN 0951-192X (Print), 1362-3052 (Online) (doi:10.1080/09511920903207464)

Beams, Rodney and Coutroubis, Alec (2008) The use of computer based teaching (CBT) in the training of marine engineers. In: 2nd International Scientific Maritime Conference - Human Resources in the Shipping Industry: New Trends and Challenges in the 21st Century, 21-22 November 2008, Limassol. (Unpublished)

Bello, L., Anang, K. A., Bakalis, P., Rapajic, P. B. and Eneh, Titus I. (2012) Sensitivity of DSR protocol performance to propagation loss models at higher microwave frequencies. In: 2012 Proceedings 14th International Conference on Modelling and Simulation (UKSim). IEEE Conference Publications . The Institute of Electrical and Electronics Engineers, Inc, California & Washington, USA and Tokyo, Japan, pp. 561-565. ISBN 978-0-7695-4682-7 (doi:10.1109/UKSim.2012.85)

Bello, L., Bakalis, P., Chintalapudi, P., Anang, K. A. and Eneh, T. I. (2011) Impact of topology control and traffic models performance on mobile ad hoc wireless routing protocol. In: 2011 Future of Instrumentation International Workshop (FIIW) Proceedings. IEEE, Piscataway, NJ, USA, pp. 158-159. ISBN 978-1-4673-5835-4 (doi:10.1109/FIIW.2011.6476823)

Bello, L., Bakalis, P., Manam, S. J., Eneh, T. I. and Anang, K. A. (2011) Power control and performance comparison of AODV and DSR ad hoc routing protocols. In: Computer Modelling and Simulation (UKSim), 2011 UkSim 13th International Conference on. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 457-460. ISBN 978-1-61284-705-4 (doi:10.1109/UKSIM.2011.93)

Bello, L., Bakalis, P., Manam, S. J., Eneh, T. I. and Anang, K. A. (2011) Power control and performance comparison of AODV and DSR ad hoc routing protocols. In: Proceedings 2011 UKSim 13th International Conference on Modelling and Simulation (UkSim 2011). IEEE Conference Publications, 1 . Institute of Electrical and Electronics Engineers (IEEE), Los Alamitos, Caifornia and Washington, US. Tokyo, Japan, pp. 457-460. ISBN 978-0-7695-4376-5 (doi:10.1109/UKSIM.2011.93)

Bello, Lawal (2013) Power conservation and performance analysis of mobile ad hoc wireless networks. PhD thesis, University of Greenwich.

Bello, Lawal, Bakalis, Panos, Manam, Samuel John and Eneh, Titus (2011) Performance optimisation of mobile ad hoc reactive routing protocols. Advanced Materials Research, 367. pp. 249-254. ISSN 1662-8985 (Print), 1022-6680 (Online) (doi:10.4028/www.scientific.net/AMR.367.249)

Bello, Lawal, Bakalis, Panos, Rapajic, Predrag and Anang, Kwashie A. (2014) Optimised adaptive power on-demand routing protocol for mobile ad hoc wireless network. IET Networks, 3 (4). pp. 245-251. ISSN 2047-4954 (Print), 2047-4962 (Online) (doi:10.1049/iet-net.2012.0115)

Bello, Lawal, Bakalis, Panos, Rapajic, Predrag, Anang, Kwashie A. and Eneh, Titus I. (2011) Adaptive receiver power routing protocol for mobile ad hoc wireless network. Journal of Communications, 6 (7). pp. 571-580. ISSN 1796-2021 (doi:10.4304/jcm.6.7.571-580)

Berkhauer-Smith, Samantha (2009) The integration of lean thinking and manufacturing business improvement methods within the aerospace supply chain. PhD thesis, University of Greenwich.

Bernasko, P.K., Mallik, S., Ekere, N.N., Seman, A. and Tayki, G. (2010) Effect of reflow profile and thermal cycle ageing on the intermetallic formation and growth in lead-free soldering. In: Electronics Packaging Technology. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 986-990. ISBN 978-1-4244-5100-5 (electronic), 978-1-4244-5099-2 (print) (doi:10.1109/EPTC.2009.5416398)

Bernasko, Peter, Mallik, Sabuj, Ekere, Ndy and Takyi, G. (2011) Evaluating the effect of pad sizes on the inter-metallic layer formation and growth for Sn-Ag-Cu solders on Cu metallization. In: International Conference on Electronics Packaging (ICEP) 2011, 13-15 April 2011, Nara Prefectural New Public Hall, Nara, Japan.

Bernasko, Peter K., Mallik, Sabuj and Takyi, G. (2015) Effect of intermetallic compound layer thickness on the shear strength of 1206 chip resistor solder joint. Soldering & Surface Mount Technology, 27 (1). pp. 52-58. ISSN 0954-0911 (doi:10.1108/SSMT-07-2013-0019)

Bernasko, Peter Kojo (2012) Study of intermetallic compound layer formation, growth and evaluation of shear strength of lead-free solder joints. PhD thesis, University of Greenwich.

Berry, R. J. and Bradley, M. S. A. (2010) Development of the Brookfield Powder Flow Tester. In: Bulk Solids Europe 2010 Conference and IMechE Symposium in New Frontiers in Bulk Materials Handling, 9-10 September 2010, Glasgow. (Unpublished)

Berry, R.J., Bradley, M.S.A. and McGregor, R.G. (2014) Brookfield powder flow tester - Results of round robin tests with CRM-116 limestone powder. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 229 (3). pp. 215-230. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1177/0954408914525387)

Berry, Rob, Bradley, Michael S. A., Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction test procedure, suitable for equipment design and powder characterisation. In: ICBMH Conference: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, Australia. (Unpublished)

Berry, Rob, Bradley, Michael S.A., Farnish, Richard J. and Angulo Pinzon, O.A. (2008) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 344-350. ISBN 9788272062896

Bhatti, R. and Berkhauer-Smith, S. (2007) An integrated methodology of manufacturing business improvement strategies. In: Olhager, J. and Persson, F., (eds.) Advances in production management systems. International Federation for Information Processing, 246 . Springer, Boston, USA, pp. 355-362. ISBN 9780387741567 (doi:http://link.springer.com/chapter/10.1007/978-0-387-74157-4_42)

Bhatti, Rajinderpal and Berkhauer-Smith, Samantha (2007) Integrating both technical and cultural aspects of process improvement. In: 5th International Conference on Manufacturing Research (ICMR 2007), 11- 13 September 2007, De Montfort University Leicester. (Unpublished)

Birchenough, A. (1975) The application of laser measurement techniques to the pneumatic transport of fine particles. PhD thesis, Thames Polytechnic.

Bogenfeld, Eckard, von-Hugo, Dirk, Arshad, Kamran, Solana, Beatriz, Taranu, Stefan, Saatsakis, Aggelos, Mange, Geneviève, Bernardo, Francisco, Jeux, Sébastien, Feng, Zhiyong, Kulkarni, Parag and Farnham, Tim (2010) Collaborative cognitive RRM, Dynamic Spectrum Management, and self-organisation for future mobile networks. In: 2010 Future Network & Mobile Summit. IIMC International Information Management Corporation Ltd., Dublin, Ireland. ISBN 9781905824182

Bojarevics, V. and Roy, A. (2012) Effect of magnetic forces on bubble transport and MHD stability of aluminium electrolysis cells. Magnetohydrodynamics, 48 (1). pp. 125-136. ISSN 0024-998X

Bradley, M., Farnish, R. and Deng, T. (2012) Predicting and preventing wear in pipe bends: Basic information for choosing a cost-effective wear protection solution. Bulk Solids Handling, 32 (4). pp. 26-31. ISSN 0173-9980

Bradley, M. S. A. and Berry, R. (2007) Investigation of the effect of test procedure factors on the failure loci and derived failure functions obtained from annular shear cells. Powder Technology, 174 (1-2). pp. 60-63. ISSN 0032-5910 (doi:10.1016/j.powtec.2006.10.023)

Bradley, M. S. A., Burnett, A. J. and Woodhead, S. R. (1995) Measurement of pressure profiles in pneumatic conveying pipelines. Instrumentation and Measurement Technology Conference, 1995. IMTC/95. Proceedings. Integrating Intelligent Instrumentation and Control., IEEE. Institute of Electrical and Electronics Engineers, New York, pp. 766-769. ISBN 978-0780326156 (doi:10.1109/IMTC.1995.515419)

Bradley, M. S. A., Reed, A. R., Berry, R. and Holmes, C.P.M. (2008) Start-up and running forces on bulk solids feeders: experimental findings versus available models. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 450-457. ISBN 9788272062896

Bradley, Michael, Berry, Robert and Farnish, Richard (2011) Methods for design of hoppers. Silos, bins and bunkers for reliable gravity flow, for pharmaceutical, food, mineral and other applications. In: BulkSolids India 2011, 6-8 April 2011, Mumbai, India. (Unpublished)

Bradley, Michael, Farnish, Richard and Deng, Tong (2011) Predicting and preventing wear in pneumatic conveying systems. In: BulkSolids India 2011, 6-8 April 2011, Mumbai, India. (Unpublished)

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

Bradley, Michael S. A., Berry, Rob, Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia. (Unpublished)

Bradley, Michael S.A., Berry, Rob and Pillai, John (2007) Comparison between the angles of wall friction measured on an on-line wall friction tester and the Jenike wall friction tester. Powder Technology, 174 (1-2). pp. 64-70. ISSN 0032-5910 (doi:10.1016/j.powtec.2006.10.024)

Bradley, Michael S.A., Berry, Rob, Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction tester and test procedure, suitable for equipment design and powder characterisation. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)

Bradley, Michael S.A., Farnish, Richard J., Reed, Alan R. and Kulkarni, Prasanna (2007) Evaluation of air induced segregation tendencies in pharmaceutical blends using a bench scale tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)

Bui, Duong Minh and Melis, Wim J.C. (2012) Energy gathering by micro turbines for low voltage appliances. In: World Congress on Sustainable Technologies (WCST-2012). IEEE, London, UK, pp. 21-26. ISBN 9781467344425

Bui, Duong Minh and Melis, Wim J.C. (2013) Micro wind turbines for energy gathering in build up areas. International Journal of Sustainable Energy Development (IJSED), 2 (2). pp. 105-114. ISSN 2046-3707 (doi:10.20533/ijsed.2046.3707.2013.0016)

Bui, Trung Thanh, Parnichkunb, Manukid and Le, Chi (2010) Structure-specified H∞ loop shaping control for balancing of bicycle robots: A particle swarm optimization approach. In: Innovative Production Machines and Systems: Fifth I*PROMS Virtual International Conference. Whittles Publishing. ISSN 9781849950060

Burnett, A. J. (1993) Wear in pneumatic conveying pipelines. Powder Handling and Processing, 15 (2). pp. 123-128. ISSN 0934-7348

Burnett, A. J., De Silva, S. R. and Reed, A. R. (1995) Comparisons between "sand blast" and "centripetal effect accelerator" type erosion testers. Wear, 186-87 (PART 1). pp. 168-178. ISSN 0043-1648 (doi:10.1016/0043-1648(95)07143-1)

Burnett, A.J., Bradley, M.S.A., O'Flynn, D.J., Deng, T. and Bingley, M. (1999) Anomalies in the results obtained from rotating disc accelerator erosion testers: a discussion of possible causes. Wear, 233-5. pp. 275-283. ISSN 0043-1648 (doi:10.1016/s0043-1648(99)00227-6)

Burnett, A.J., Desilva, S.R. and Reed, Alan R. (1995) Comparisons between “sand blast” and “centripetal effect accelerator” type erosion testers. Wear, 186-18 (1). pp. 168-178. ISSN 0043-1648 (doi:10.1016/0043-1648(95)07143-1)

Burnett, Anthony John (1996) The use of laboratory erosion tests for the prediction of wear in pneumatic conveyor bends. PhD thesis, University of Greenwich.

Callaghan, Peter and Batchelor, John C. (2008) Dual-band pin-patch antenna for wi-fi applications. IEEE Antennas and Wireless Propagation Letters, 7. pp. 757-760. ISSN 1536-1225 (doi:10.1109/LAWP.2008.2004885)

Callaghan, Peter and Batchelor, John C. (2008) Multiband low-profile antenna for remote antenna unit picocell applications. IEEE Transactions on Antennas and Propagation, 56 (8). pp. 2475-2480. ISSN 0018-926X (doi:10.1109/TAP.2008.927558)

Callaghan, Peter, Gomes, Nathan J., Batchelor, John C. and Formont, Stephane (2009) Experimental investigation of an optically fed phase array for UWB personal area networks. In: International Topical Meeting on Microwave Photonics, 2009. MWP '09. Universidad Politécnica de Valencia, Valencia, Spain. ISBN 978-1-4244-4788-6

Callaghan, Peter, Sagor, Md. Hasanuzzaman and Batchelor, John C. (2011) Control of ground plane influence on antenna radiation pattern for mobile handheld devices. In: 2011 Loughborough Antennas and Propagation Conference (LAPC). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-4. ISBN 978-1-4577-1014-8 (doi:10.1109/LAPC.2011.6114127)

Cardoso, C., Keates, S. and Clarkson, P. J. (2005) Are users necessary for inclusive design? In: DS 35: Proceedings ICED 05, the 15th International Conference on Engineering Design. The Design Society, DS35_520.44. ISBN 0-85825-788-2

Cardoso, C., Keates, S. and Clarkson, P. J. (2003) Assessing inclusivity throughout the design process. In: DS 31: Proceedings of ICED 03, the 14th International Conference on Engineering Design, Stockholm: Innovation and customer demands. The Design Society, Stockholm, Sweden, pp. 45-46. ISBN 1-904670-00-8

Cardoso, C., Keates, S. and Clarkson, P. J. (2002) Assessing interface inclusivity throughout the design process. In: 7th ERCIM Workshop on "User Interfaces for All", 23-25 October, 2002, Paris (Chantilly), France. (Unpublished)

Cardoso, C., Keates, S. and Clarkson, P. J. (2004) Comparing product assessment methods for inclusive design. In: Keates, Simeon, Clarkson, John, Langdon, Patrick and Robinson, Peter, (eds.) Designing a more inclusive world. Springer-Verlag London, UK, pp. 31-40. ISBN 978-1-4471-1046-0

Cardoso, C., Keates, S. and Clarkson, P. J. (2002) Designing for inclusivity: Assessing the accessibility of everyday products. In: Proceedings of CWUAAT '02, 1st Cambridge Workshop on Universal Access and Assistive Technology (CWUAAT '02). Department of Engineering, University of Cambridge, Cambridge, UK, pp. 47-51.

Cardoso, C., Keates, S. and Clarkson, P. J. (2001) Results of a workshop on assessing accessibility of everyday products. [Working Paper]

Cardoso, Carlos, Clarkson, P. John, Harrison, Lee-Anne, Langdon, Patrick and Keates, Simeon (2001) Assessing the accessibility of everyday products. In: International Conference on Inclusive Design and Communications (INCLUDE 2001), 18 - 20 April 2001, Royal College of Art, London, UK.

Cardoso, Carlos, Clarkson, P. John and Keates, Simeon (2005) Can users be excluded from an inclusive design process? In: 3rd International Conference on Universal Access in Human-Computer Interaction, 22-27 July 2005, Las Vegas, Nevada, USA.

Cardoso, Carlos, Keates, Simeon and Clarkson, John (2003) Assessment for inclusive design. In: Clarkson, John, Coleman, Roger, Keates, Simeon and Lebbon, Cherie, (eds.) Inclusive Design: Design for the Whole Population. Springer-Verlag London, London, pp. 458-477. ISBN 978-1-4471-0001-0

Cardoso, Carlos, Keates, Simeon and Clarkson, John (2003) Identifying design exclusion: a review of assessment methods. In: International Conference on Inclusive Design and Communications (INCLUDE 2003), 25-18 Mar 2003, Royal College of Art, London, UK.

Carter, R.M., Krabicka, Jan, Yan, Y. and Cornwell, S. (2009) An integrated instrumentation system for combustion plant optimisation. pp. 780-784. (doi:10.1109/IMTC.2009.5168556)

Cetin, D., Yildirim, S. and Kilic, G. (2011) A New Approach for Determination of Adhesion Coefficient in Pipejacking Method by Experimental and Numerical Analysis: An Example from Istanbul. Experimental Techniques. pp. 1-17. ISSN 1046-6789 (doi:10.1111/j.1747-1567.2011.00764.x)

Chapelle, Pierre, Christakis, Nicholas, Abou-Chakra, Hadi, Bridle, Ian, Bradley, M.S.A., Patel, Mayur and Cross, Mark (2004) Computational model for prediction of particle degradation during dilute-phase pneumatic conveying: modeling of dilute-phase pneumatic conveying. Advanced Powder Technology, 15 (1). pp. 31-49. ISSN 0921-8831 (Print), 1568-5527 (Online) (doi:10.1163/15685520460740052)

Chen, H. P., Stevenson, M. W. and Li, C.-Q. (2008) Assessment of existing soakaways for reuse. Proceedings of the Institution of Civil Engineers-Water Management, 161 (3). pp. 141-149. ISSN 1741-7589 (doi:10.1680/wama.2008.161.3.141)

Chen, H.P. (2014) Vibration based structural model updating and damage identification of bridges. In: Bridge Maintenance, Safety, Management and Life Extension. Proceedings of the 7th International Conference of Bridge Maintenance, Safety and Management, 7–11 July 2014, Shanghai, China. CRC Press / Balkema, Taylor & Francis Group, Leiden, The Netherlands, pp. 499-506. ISBN 978-1-138-00103-9 (doi:10.1201/b17063-70)

Chen, Hua Peng (2009) Mode shape expansion using perturbed force approach. Journal of Sound and Vibration, 329 (8). pp. 1177-1190. ISSN 0022-460X (doi:10.1016/j.jsv.2009.10.027)

Chen, Hua Peng and Huang, Tian-Li (2012) Updating finite element model using dynamic perturbation method and regularization algorithm. Smart Structures and Systems, 10 (4-5). pp. 427-442. ISSN 1738-1584 (Print), 1738-1991 (Online)

Chen, Hua Peng and Xiao, Nan (2012) Analytical solutions for corrosion-induced cohesive concrete cracking. Journal of Applied Mathematics, 25. pp. 2-25. ISSN 1110-757X (doi:10.1155/2012/769132)

Chen, Hua-Pen and Alani, Amir M. (2012) Reliability and optimised maintenance for sea defences. Proceedings of the ICE - Maritime Engineering, 165 (2). pp. 51-64. ISSN 1741-7597 (Print), 1751-7737 (Online) (doi:10.1680/maen.2010.37)

Chen, Hua-Peng (2008) Application of regularization methods to damage detection in large scale plane frame structures using incomplete noisy modal data. Engineering Structures, 30 (11). 3219 - 3227. ISSN 0141-0296 (doi:10.1016/j.engstruct.2008.04.038)

Chen, Hua-Peng (2006) Efficient methods for determining modal parameters of dynamic structures with large modifications. Journal of Sound and Vibration, 298 (1-2). pp. 462-470. ISSN 0022-460X (doi:10.1016/j.jsv.2006.06.002)

Chen, Hua-Peng (2008) Mode shape expansion using perturbed force vector approach. In: Sixteenth UK Conference of the Association of Computational Mechanics in Engineering (ACME UK), 1-2 Apr 2008, Newcastle upon Tyne, UK. (Unpublished)

Chen, Hua-Peng (2008) Singular stresses at the tip of a crack terminating at frictional interface of fibre reinforced composites. In: Sixteenth UK Conference of the Association of Computational Mechanics in Engineering (ACME UK), 1-2 Apr 2008, Newcastle upon Tyne, UK. (Unpublished)

Chen, Hua-Peng and Alani, Amir M. (2013) Optimized maintenance strategy for concrete structures affected by cracking due to reinforcement corrosion. ACI Structural Journal, 110 (2). pp. 229-238. ISSN 0889-3241

Chen, Hua-Peng and Bicanic, Nenad (2010) Identification of structural damage in buildings using iterative procedure and regularisation method. Engineering Computations, 27 (8). pp. 930-950. ISSN 0264-4401 (doi:10.1108/02644401011082962)

Chen, Hua-Peng, Guo, Z. and Zhou, X. (2012) Stress singularities of contact problems with a frictional interface in anisotropic bimaterials. Fatigue & Fracture of Engineering Materials & Structures, 35 (8). pp. 718-731. ISSN 8756-758X (Print), 1460-2695 (Online) (doi:10.1111/j.1460-2695.2011.01642.x)

Chen, Hua-Peng and Maung, Than Soe (2014) Regularised finite element model updating using measured incomplete modal data. Journal of Sound and Vibration, 333 (21). pp. 5566-5582. ISSN 0022-460X (doi:10.1016/j.jsv.2014.05.051)

Chen, Hua-Peng and Maung, Than Soe (2014) Structural damage evolution assessment using the regularised time step integration method. Journal of Sound and Vibration, 333 (18). pp. 4104-4122. ISSN 0022-460X (doi:10.1016/j.jsv.2014.04.044)

Chen, Hua-Peng and Nepal, Jaya (2015) Analytical model for residual bond strength of corroded reinforcement in concrete structures. Journal of Engineering Mechanics. ISSN 0733-9399 (Print), 1943-7889 (Online) (doi:10.1061/(ASCE)EM.1943-7889.0000997)

Chen, Hua-Peng and Nepal, Jaya (2015) Stochastic modelling and lifecycle performance assessment of bond strength of corroded reinforcement in concrete. Structural Engineering and Mechanics, 54 (2). pp. 319-336. ISSN 1225-4568 (Print), 1598-6217 (Online) (doi:10.12989/sem.2015.54.2.319)

Chen, Hua-Peng, Tee, Kong Fah and Ni, Yi-Qing (2012) Mode shape expansion with consideration of analytical modelling errors and modal measurement uncertainty. Smart Structures and Systems, 10 (4-5). pp. 485-499. ISSN 1738-1584 (Print), 1738-1991 (Online)

Chen, Hua-Peng, Wang, Ke-Lai and Tee, Kong Fah (2010) Structural health monitoring utilizing dynamic perturbation method. In: 3rd International Conference on Dynamics, Vibration and Control (ICDVC), 12-14 May 2010, Hangzhou, China.

Chen, Jinhu, Hutchings, Ian M., Deng, Tong, Bradley, Michael S. A. and Koziol, Krzysztof K. K. (2014) The effect of carbon nanotube orientation on erosive wear resistance of CNT-epoxy based composites. Carbon, 73. pp. 421-431. ISSN 0008-6223 (doi:10.1016/j.carbon.2014.02.083)

Chen, Li Choo (2007) Optimisation of rule-based testing for scheduling within a distributed computing environment. PhD thesis, University of Greenwich.

Chen, Y., Gunawan, E., Low, K. S., Wang, S. C., Soh, C. B. and Putti, T. C. (2008) Effect of lesion morphology on microwave signature in 2-D ultra-wideband breast imaging. IEEE Transactions on Biomedical Engineering, 55 (8). pp. 2011-2021. ISSN 0018-9294 (doi:10.1109/TBME.2008.921136)

Chen, Y., Gunawan, E., Low, K. S., Wang, S. C., Soh, C. B. and Putti, T. C. (2008) Time-reversal ultrawideband breast imaging: pulse design criteria considering multiple tumors with unknown tissue properties. IEEE Transactions on Antennas and Propagation, 56 (9). pp. 3073-3077. ISSN 0018-926X (doi:10.1109/TAP.2008.928811)

Chen, Y., Hu, L., Yuen, C., Zhang, Y., Zhang, Z. and Rapajic, P. (2009) Intrinsic measure of diversity gains in generalised distributed antenna systems with cooperative users. IET Communications, 3 (2). pp. 209-222. ISSN 1751-8628 (Print), 1751-8636 (Online) (doi:10.1049/iet-com:20080064)

Chen, Y. and Rapajic, P. (2008) Ultra-wideband cognitive interrogator network for indoor location tracking - part 1: system architecture and network performance analysis. 2008 IEEE 19th International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-5. ISBN 9781424426447 (doi:10.1109/PIMRC.2008.4699464)

Chen, Y. and Rapajic, P. (2010) Ultra-wideband cognitive interrogator network: Adaptive illumination with active sensors for target localisation. Communications, IET, 4 (5). pp. 573-584. ISSN 1751 8628 (doi:10.1049/iet-com.2009.0495)

Chen, Y., Yuen, C., Zhang, Y. and Zhang, Z. (2007) Diversity gains of generalised distributed antenna systems with cooperative users. 2007 IEEE Wireless Communications & Networking Conference. IEEE Explore, Piscataway, NJ, USA, pp. 797-802. ISBN 1424406587 (doi:10.1109/WCNC.2007.152)

Chen, Y., Zhang, Z., Hu, L. and Rapajic, P.B. (2009) Geometry-based statistical model for radio propagation in rectangular office buildings. Progress In Electromagnetics Research B, 17. pp. 187-212. ISSN 1937-6472 (doi:10.2528/PIERB09080603)

Chen, Yifan, Craddock, I.J. and Kosmas, P. (2010) Feasibility study of lesion classification via contrast-agent-aided UWB breast imaging. IEEE Transactions on Biomedical Engineering, 57 (5). pp. 1003-1007. ISSN 0018-9294 (doi:10.1109/TBME.2009.2038788)

Chen, Yifan, Craddock, I.J., Kosmas, P., Ghavami, M. and Rapajic, P. (2010) Multiple-input multiple-output radar for lesion classification in ultrawideband breast imaging. IEEE Journal of Selected Topics in Signal Processing, 4 (1). pp. 187-201. ISSN 1932-4553 (doi:10.1109/JSTSP.2009.2038975)

Chen, Yifan, Hu, Luoquan, Yuen, Chau, Zhang, Yan, Zhang, Zhenrong and Rapajic, Predrag (2009) Cooperative diversity of generalized distributed antenna systems. In: Zhang, Yan, Chen, Hsiao-Hwa and Guizani, Mohsen, (eds.) Cooperative Wireless Communications. Wireless Networks and Mobile Communications . Auerbach Publications, Boca Raton, Fl., USA, pp. 233-258. ISBN 978-1420064698

Chen, Yifan and Rapajic, P. (2009) Novel channel description method for decentralized wireless relay networks. In: Microwave Conference 2009. Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ, USA, pp. 2164-2167. ISBN 978-1-4244-2802-1 (e-ISBN), 978-1-4244-2801-4 (print) (doi:10.1109/APMC.2009.5385513)

Chen, Yifan and Rapajic, Predrag (2010) Decentralized wireless relay network channel modeling: An analogous approach to mobile radio channel characterization. IEEE Transactions on Communications, 58 (2). pp. 467-473. ISSN 0090-6778 (doi:10.1109/TCOMM.2010.02.080315)

Chen, Yifan and Rapajic, Predrag (2008) Human respiration rate estimation using ultra-wideband distributed cognitive radar system. International Journal of Automation and Computing, 5 (4). pp. 325-333. ISSN 1476-8186 (doi:10.1007/s11633-008-0325-3)

Chen, Yifan, Teo, Jianqi, Lai, Joshua, Gunawan, Erry, Low, Kaysoon, Soh, Cheongboon and Rapajic, Predrag (2008) Cooperative UWB body area networking: channel measurement and diversity analysis. In: 2008 IEEE 10th International symposium on spread spectrum techniques and applications. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc, Piscataway, NJ, USA, pp. 303-308. ISBN 9781424422036 (doi:10.1109/ISSSTA.2008.61)

Chen, Yifan, Teo, Jianqi, Lai, Joshua Chong Yue, Gunawan, Erry, Low, Kay Soon, Soh, Cheong Boon and Rapajic, Predrag B. (2009) Cooperative communications in ultra-wideband wireless body area networks: Channel modeling and system diversity analysis. IEEE Journal on Selected Areas in Communications, 27 (1). pp. 5-16. ISSN 0733-8716 (doi:10.1109/JSAC.2009.090102)

Chen, Yifan and Woo, Wai Lok (2010) On modeling of cognitive interrogator-sensor network: Layered discrete memoryless channel and finite-state Markov channel. In: 2nd International Workshop on Cognitive Information Processing (CIP), 2010. 2nd International Workshop on Cognitive Information Processing (CIP), 2010 . IEEE Xplore Digital Library, Elba, pp. 11-16. ISBN 978-1-4244-6457-9 (print) ISSN 2150 4938 (online) (doi:10.1109/CIP.2010.5604122)

Cheung, W.M., Matthews, P.C., Gao, J.X. and Maropoulos, P.G. (2008) Advanced product development integration architecture: an out-of-box solution to support distributed production networks. International Journal of Production Research, 46 (12). pp. 3185-3206. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:10.1080/00207540601039767)

Chi, Xuesong (2008) A web-based intelligent learning environment for the teaching of industrial continuous quality improvement. PhD thesis, University of Greenwich.

Chishty, Owais and Melis, Wim J.C. (2012) Energy regeneration from decelerating vehicle. In: World Congress on Sustainable Technologies (WCST 2012). IEEE, London, UK, pp. 12-15. ISBN 9781467344425

Chowdary, Boppana V., Sahatoo, Divesh R. and Bhatti, Raj (2007) Some STL file generation issues in rapid prototyping. In: Esparragoza, Ivan E., Bermudez, Manuel and Petrie, Maria Larrondo, (eds.) 5th Latin American and Caribbean Conference for Engineering and Technology Developing Entrepreneural Engineers for the Sustainable Growth of Latin American and Caribbean: Education, Innovation, Technology, and Practice. Latin American and Caribbean Consortium of Engineering Institutions, Florida. ISBN 098228960X

Christakis, N., Wang, J., Patel, M.K., Bradley, M.S.A., Leaper, M.C. and Cross, M. (2006) Aggregation and caking processes of granular materials: continuum model and numerical simulation with application to sugar. Advanced Powder Technology, 17 (5). pp. 543-565. ISSN 0921-8831 (doi:10.1163/156855206778440480)

Christakis, Nicholas, Chapelle, Pierre, Strusevich, Nadezhda, Bridle, Ian, Baxter, John, Patel, Mayur K., Cross, Mark, Tüzün, Ugur, Reed, Alan R. and Bradley, Michael S. A. (2006) A hybrid numerical model for predicting segregation during core flow discharge. Advanced Powder Technology, 17 (6). pp. 641-662. ISSN 0921-8831 (doi:10.1163/156855206778917715)

Christopher, C.J., James, M.N., Patterson, E.A. and Tee, Kong (2008) A quantitative evaluation of fatigue crack shielding forces using photoelasticity. Engineering Fracture Mechanics, 75 (14). pp. 4190-4199. ISSN 0013-7944 (doi:10.1016/j.engfracmech.2008.03.013)

Christopher, C.J., James, M.N., Tee, Kong-Fah and Patterson, E.A. (2008) Evaluation of crack tip shielding using a photoelastic model. In: the SEM XI International Congress on Experimental and Applied Mechanics, 2-5 June 2008, Orlando, FL, USA,.

Chukwuka, Eleazar and Arshad, Kamran (2013) Energy efficient MAC protocols for wireless sensor network: a survey. International Journal of Wireless & Mobile Networks, 5 (4). pp. 75-89. (doi:10.5121/ijwmn.2013.5406)

Clarkson, John, Coleman, Roger, Keates, Simeon and Lebbon, Cherie (eds.) (2003) Inclusive design: design for the whole population. In: Clarkson, P.J, Coleman, R., Keates, S. and Lebbon, C., (eds.) Springer-Verlag, London. ISBN 978-1-85233-700-1

Clarkson, John, Dong, Hua and Keates, Simeon (2003) Quantifying design exclusion. In: Clarkson, John, Coleman, Roger, Keates, Simeon and Lebbon, Cherie, (eds.) Inclusive Design: Design for the Whole Population. Springer-Verlag London, London, pp. 422-437.

Clarkson, John, Dong, Hua and Keates, Simeon (2003) The prevalence of functional impairment in Great Britain. In: Clarkson, John, Coleman, Roger, Keates, Simeon and Lebbon, Cherie, (eds.) Inclusive Design: Design for the Whole Population. Springer-Verlag London, London, pp. 360-371. ISBN 978-1-4471-0001-0

Clarkson, John, Harrison, Lee-Anne and Keates, Simeon (2001) How to assess whether new technology is necessarily better technology. In: International Conference on Inclusive Design and Communications (INCLUDE 2001), 18 - 20 April 2001, Royal College of Art, London, UK.

Clarkson, John and Keates, Simeon (2003) Digital television for all: A report on accessibility and inclusive design. Appendix E - Investigating the inclusivity of digital television set-top box receivers. Technical Report. Department of Trade and Industry, UK.

Clarkson, John and Keates, Simeon (2001) A Practical Inclusive Design Approach. In: International Conference on Inclusive Design and Communications (INCLUDE 2001), 18 - 20 April 2001, Royal College of Art, London, UK.

Clarkson, John and Keates, Simeon (2003) User capabilities and product demands. In: International Conference on Inclusive Design and Communications (INCLUDE 2003), 25-18 Mar 2003, Royal College of Art, London, UK.

Clarkson, P. and Keates, S. (1998) Design for all: designing for the motion-impaired user. [Working Paper]

Clarkson, P. John and Keates, Simeon (2003) A framework for minimising design exclusion. In: International Conference on Inclusive Design and Communications (INCLUDE 2003), 25-18 Mar 2003, Royal College of Art, London, UK.

Clarkson, P. J., Dong, H. and Keates, S. (2003) Adaptation of a disability severity scale for product assessment. In: DS 31: Proceedings of ICED 03, the 14th International Conference on Engineering Design, Stockholm: Industrial design engineering - applications and context. The Design Society, Stockholm, Sweden, pp. 659-660. ISBN 1-904670-00-8

Clarkson, P. J., Dong, H. and Keates, S. (2003) Visualising design exclusion. In: DS 31: Proceedings of ICED 03, the 14th International Conference on Engineering Design, Stockholm: Industrial design engineering - applications and context. The Design Society, Stockholm, Sweden, pp. 655-656. ISBN 1-904670-00-8

Clarkson, P. J. and Keates, S. (2002) Quantifying design exclusion. In: Universal access and assistive technology: Proceedings of the Cambridge workshop on UA and AT ’02. Springer-Verlag, London, UK, pp. 23-32. ISBN 978-1-4471-3721-4 (doi:10.1007/978-1-4471-3719-1_3)

Clarkson, P. J. and Keates, S. (2001) Towards an inclusive design approach - a case study of exclusion. In: Design Methods for Performance and Sustainability 13th International Conference on Engineering Design - ICED 01. Iced Series, 3 (28). John Wiley & Sons, Glasgow, UK, pp. 355-362. ISBN 978-1860583568

Clarkson, P. J., Keates, S., Coleman, R., Lebbon, C. and Johnston, M. (2000) A model for inclusive design. In: Design for Excellence: Engineering Design Conference 2000. Wiley-Blackwell, UK, pp. 203-212. ISBN 978-1-86058-259-2

Clarkson, P. J., Keates, S., Dong, H. and Langdon, P. (2002) Understanding the range of user capabilities. In: Computer-Based Design: Engineering Design Conference 2002. Wiley, UK, pp. 303-312. ISBN 978-1860583728

Clarkson, P. J., Keates, S. and Langdon, P. (2002) Minimising exclusion by design. In: Computer-Based Design: Engineering Design Conference 2002. Wiley, UK, pp. 507-516. ISBN 978-1860583728

Clarkson, P. J., Keates, Simeon and Dowland, R. (1999) The design and control of assistive devices. In: ICED 99: Proceedings of the 12th International Conference on Engineering Design. WDK [ICED], 1 (26). ICED, 1999, Munich, Germany, pp. 425-428. ISBN 978-3-922979-53-1

Clarkson, P. John and Keates, Simeon (2003) Inclusive design: A balance between product demands and user capabilities. In: ASME 2003 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: 15th International Conference on Design Theory and Methodology. ASME Digital Collection, pp. 575-584. ISBN 0-7918-3701-7 (doi:10.1115/DETC2003/DTM-48653)

Clarkson, P.J., Keates, S., Coleman, R., Lebbon, C. and Johnston, M. (2000) I-Design project (inclusive design for the whole population). In: Designing for the 21st Century: International Conference on Universal Design, 14-18 Jun 2000, Rhode Island, USA.

Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2008) Knowledge reuse in manufacturability analysis. Robotics and Computer Integrated Manufacturing, 24 (4). pp. 508-513. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.003)

Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2009) Manufacturing knowledge verification in design support systems. International Journal of Production Research, 47 (12). pp. 3179-3204. ISSN 0020-7543 (Print), 1366–588X (Online) (doi:10.1080/00207540701802452)

Coleman, Nichola and Craig, D. Q. M. (1996) Modulated temperature differential scanning calorimetry: A novel approach to pharmaceutical thermal analysis. International Journal of Pharmaceutics, 135 (1-2). pp. 13-29. ISSN 0378-5173 (Print), 1873-3476 (Online) (doi:10.1016/0378-5173(95)04463-9)

Coleman, R., Clarkson, P. J. and Keates, S. (2004) Inclusive design in practice - developing a new british standard. In: Designing for the 21st Century III, 7 - 12 DECEMBER 2004, Rio de Janeiro, Brazil. (Unpublished)

Coleman, R., Lebbon, C., Clarkson, P. J., Keates, S. and Johnston, M. (2004) Inclusive design in practice - i-design: A research project into design tools information and guidance. In: Designing for the 21st Century III, 7 - 12 DECEMBER 2014, Rio de Janeiro, Brazil. (Unpublished)

Coutroubis, Alec (2010) AIS signals should be scrambled in hotspots. Nautilus International, 43 (1).

Coutroubis, Alec (2010) Somalia piracy vs fishing activities in the country's territorial waters and it's exclusive economic zone. In: 12th International Conference on Maritime Transport and Infrastructure, 29 - 30 April 2010, Riga, Latvia.

Coutroubis, Alec D. and Kiourktsoglou, Georgios (2014) Is this the end of Somali piracy? Shipping: International Monthly Review, 349 (503). pp. 12-14.

Coutroubis, Alexander and Beams, Rodney (2007) The use of computer based training (CBT) in the training of marine engineers. In: LMA 9th International Conference Maritime Transport and Infrastructure-2007, 19-20 April 2007, Riga, Latvia. (Unpublished)

Coy, J., Keates, S. and Clarkson, P. J. (2001) Improving accessibility in the workplace: manual data entry in video coding. In: Mail Technology: Evolution to e-Revolution. Wiley-Blackwell, Brighton, UK, pp. 201-210. ISBN 978-1-86058-327-8

Coy, J., Keates, S., Clarkson, P. J., Harrison, L. J. and Robinson, P. (2001) Design for accessibility: the personal information point. In: Mail Technology: Evolution to e-Revolution. Wiley-Blackwell, Brighton, UK, pp. 159-168. ISBN 978-1-86058-327-8

Daniel, Simon, Skarvelis-Kazakos, Spryos and Jain, Priyanka (2013) Local smart DC networks and distributed storage for reducing and shifting peak load. In: 22nd International Conference on Electricity Distribution. IET/CIRED, Stockholm, Sweden.

Datta, Rohit, Arshad, Kamran and Fettweis, Gerhard (2012) Analysis of spectrum sensing characteristics for cognitive radio GFDM signal. In: 8th International Wireless Communications & Mobile Computing Conference Proceedings. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 356-359. ISBN 9781457713781 (doi:10.1109/IWCMC.2012.6314230)

Dehghani, Mohammad and Arshad, Kamran (2014) LTE-advanced, and the way forward. In: 2014 14th International Symposium on Communications and Information Technologies (ISCIT). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 466-469. ISBN 9781479944163 (doi:10.1109/ISCIT.2014.7011956)

Deng, T., Bingley, M.S., Bradley, M.S.A. and De Silva, S.R. (2008) A comparison of the gas-blast and centrifugal-accelerator erosion testers: The influence of particle dynamics. Wear, 265 (7-8). pp. 945-955. ISSN 0043-1648 (doi:10.1016/j.wear.2008.02.017)

Deng, T., Farnish, R.J. and Bradley, M.S.A. (2007) Pressure drop in dense phase conveying. Bulk Solids Handling, 27 (5). pp. 296-301. ISSN 0173-9980

Deng, T., Li, J., Chaudhry, A.R., Patel, M., Hutchings, I. and Bradley, M.S.A. (2004) Comparison between weight loss of bends in a pneumatic conveyor and erosion rate obtained in a centrifugal erosion tester for the same materials. Wear, 258 (1-4). pp. 402-411. ISSN 0043-1648 (doi:10.1016/j.wear.2004.02.012)

Deng, T., Patel, M., Hutchings, I. and Bradley, M.S.A. (2004) Effect of bend orientation on life and puncture point location due to solid particle erosion of a high concentration flow in pneumatic conveyors. Wear, 258 (1-4). pp. 426-433. ISSN 0043-1648 (doi:10.1016/j.wear.2004.02.010)

Deng, T., Su, J.W., Zhang, Y., Bradley, M.S.A. and Wei, X.L. (2011) Making coal/biomass pellets for co-firing - a review and pioneer work. In: Proceedings of the Bioten Conference on Biomass Bioenergy and Biofuels 2010. CPL Press, Newbury, UK. ISBN 9781872691541

Deng, Tong, Bingley, Mark S. and Bradley, Michael S. A. (2004) The influence of particle rotation on the solid particle erosion rate of metals. Wear, 256 (11-12). pp. 1037-1049. ISSN 0043-1648 (doi:10.1016/S0043-1648(03)00536-2)

Deng, Tong, Bingley, Mark S. and Bradley, Mike S.A. (2009) Understanding particle dynamics in erosion testers: a review of influences of particle movement on erosion test conditions. Wear, 267 (11). pp. 2132-2140. ISSN 0043-1648 (doi:10.1016/j.wear.2009.02.020)

Deng, Tong, Bradley, Michael S. A., Berry, Rob and Kostuch, J. (2008) Caking strength of granulated clay under frozen conditions. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 604-609. ISBN 9788272062896

Deng, Tong, Farnish, Richard J. and Bradley, Michael S.A. (2008) Evaluation of particle degradation due to high-speed impacts in a pneumatic handling system. Particulate Science and Technology, 26 (5). pp. 438-450. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:10.1080/02726350802367522)

Deng, Tong and Hussain, Tariq (2013) Taking charge. Solids & Bulk Handling. pp. 10-12.

Deng, Tong, Paul, Kirsty A., Bradley, Michael S.A., Immins, Lee, Preston, Chris, Scott, Jerry F. and Welfare, Eloise H. (2010) Investigations on air induced segregation of pharmaceutical powders and effect of material flow functions. Powder Technology, 203 (2). pp. 354-358. ISSN 0032-5910 (doi:10.1016/j.powtec.2010.05.028)

Dickinger, Astrid, Arami, Mitra and Meyer, David (2006) Reconsidering the adoption process: enjoyment and social norms — antecedents of hedonic mobile technology use. Proceedings of the 39th Annual Hawaii International Conference on System Sciences, 2006. IEEE Xplore, Piscataway, NJ, USA, 23a-23a. ISBN 0-7695-2507-5 ISSN 1530-1605 (doi:10.1109/HICSS.2006.410)

Dobson, R., Wu, Ruiheng and Callaghan, P. (2012) Blood glucose monitoring using microwave cavity perturbation. Electronics Letters, 48 (15). pp. 905-906. ISSN 0013-5194 (doi:10.1049/el.2012.1811)

Dong, H., Cardoso, C., Cassim, J., Keates, S. and Clarkson, P. J. (2002) Inclusive design: Reflections on design practice. [Working Paper]

Dong, H., Keates, S., Clarkson, J. and Cassim, J. (2004) 'Discounted' user research for inclusive design. In: The Home and Electronic Assistive Techology, HEAT 2004, 16-17th March 2004, York, UK.

Dong, H., Keates, S. and Clarkson, P. J. (2003) Designers and manufacturers' perspectives on inclusive/universal design. In: DS 31: Proceedings of ICED 03, the 14th International Conference on Engineering Design, Stockholm: Design in industry - methods and technology transfer. The Design Society, Stockholm, Sweden, pp. 511-512. ISBN 1-904670-00-8

Dong, H., Keates, S. and Clarkson, P. J. (2004) Developing and evaluating a booklet for inclusive design. In: Proceedings of the 2nd Cambridge Workshop on Universal Access and Assistive Technology (incorporating the 5th Cambridge Workshop on Rehabilitation Robotics): Designing a more inclusive world. Department of Engineering, University of Cambridge, Cambridge, UK, pp. 177-182.

Dong, H., Keates, S. and Clarkson, P. J. (2002) Inclusive design diagnosis based on the ONS scales? In: Proceedings of CWUAAT '02, 1st Cambridge Workshop on Universal Access and Assistive Technology (CWUAAT '02). Department of Engineering, University of Cambridge, Cambridge, UK, pp. 71-77.

Dong, Hua, Clarkson, P. John, Ahmed, Saeema and Keates, Simeon (2004) Investigating perceptions of manufacturers and retailers to inclusive design. The Design Journal: An International Journal for All Aspects of Design, 7 (3). pp. 3-15. ISSN 1460-6925 (Print), 1756-3062 (Online) (doi:10.2752/146069204789338398)

Dong, Hua, Clarkson, P. John, Cassim, Julia and Keates, Simeon (2005) Critical user forums - an effective user research method for inclusive design. The Design Journal: An International Journal for All Aspects of Design, 8 (2). pp. 49-59. ISSN 1460-6925 (Print), 1756-3062 (Online) (doi:10.2752/146069205789331628)

Dong, Hua, Clarkson, P. John and Keates, Simeon (2004) Industry perceptions to inclusive design: A comparative study. In: ASME 2004 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: 2nd Symposium on International Issues in Engineering Design. ASME Digital Collection, pp. 553-562. ISBN 0-7918-4696-2 (doi:10.1115/DETC2004-57614)

Dong, Hua, Clarkson, P. John and Keates, Simeon (2004) Requirements capture for inclusive design resources and tools. In: ASME 7th Biennial Conference on Engineering Systems Design and Analysis. ASME Digital Collection, pp. 27-36. ISBN 0-7918-4175-8 (doi:10.1115/ESDA2004-58114)

Dong, Hua, Keates, Simeon and Clarkson, John (2002) Accommodating older users' functional capabilities. In: BCS HCI 2002, 3rd September, 2002, South Bank University, London, UK.

Dong, Hua, Keates, Simeon and Clarkson, John (2003) Inclusive design in industry: motivations and barriers. ACM SIGCAPH Computers and the Physically Handicapped Newsletter, 75. pp. 9-10. ISSN 0163-5727 (doi:10.1145/976261.976264)

Dong, Hua, Keates, Simeon and Clarkson, John (2003) UK and US industrial perspectives on inclusive design. In: International Conference on Inclusive Design and Communications (INCLUDE 2003), 25-18 Mar 2003, Royal College of Art, London, UK.

Dong, Hua, Keates, Simeon and Clarkson, P. John (2004) Inclusive design in industry: barriers, drivers and the business case. In: User-Centered Interaction Paradigms for Universal Access in the Information Society: Revised Selected Papers from the 8th ERCIM Workshop on User Interfaces for All. Part IV. Lecture Notes in Computer Science, 3196 . Springer Berlin Heidelberg, Germany, pp. 305-319. ISBN 978-3-540-23375-6 ISSN 0302-9743 (doi:10.1007/978-3-540-30111-0_26)

Dong, Hua, Keates, Simeon, Clarkson, P. John and Cassim, Julia (2003) Implementing Inclusive Design: The Discrepancy between Theory and Practice. In: Carbonell, Noëlle and Stephanidis, Constantine, (eds.) Universal Access Theoretical Perspectives, Practice, and Experience: the 7th ERCIM International Workshop on User Interfaces for All. Revised Papers. Part II. Lecture Notes in Computer Science, 2615 . Springer Berlin Heidelberg, Heidelberg, pp. 106-117. ISBN 978-3-540-00855-2 (doi:10.1007/3-540-36572-9_8)

Doultsinou, Athanasia, Roy, Rajkumar, Baxter, David and Gao, James (2008) Key service issues in two UK manufacturing companies from a PSS perspective. Proceedings of the Cranfield Multi-Strand Conference: Creating Wealth Through Research and Innovation (CMC 2008): 6-7 May 2008. Cranfield University Press, Cranfield University, pp. 287-292. ISBN 9780955743672

Doultsinou, Athanasia, Roy, Rajkumar, Baxter, David, Gao, James and Mann, Andy (2009) Developing a service knowledge reuse framework for engineering design. Journal of Engineering Design, 20 (4). pp. 389-411. ISSN 0954-4828 (Print), 1466-1837 (Online) (doi:10.1080/09544820903149354)

Durairaj, R., Mallik, S., Seman, A. and Ekere, N.N. (2009) Investigation of wall-slip behaviour in lead-free solder pastes and isotropic conductive adhesives. Sadhana - Academy Proceedings in Engineering Sciences, 34 (5). pp. 799-810. ISSN 0256-2499 (Print), 0973-7677 (Online) (doi:10.1007/s12046-009-0046-5)

Durairaj, R., Mallik, S., Seman, A., Marks, A. and Ekere, N.N. (2009) Rheological characterisation of solder pastes and isotropic conductive adhesives used for flip-chip assembly. Journal of Materials Processing Technology, 209 (8). pp. 3923-3930. ISSN 0924-0136 (doi:10.1016/j.jmatprotec.2008.09.013)

Durairaj, R., Mallik, S., Seman, A., Marks, A. and Ekere, N.N. (2008) Viscoelastic properties of solder paste and isotropic conductive adhesives used for flip-chip assembly. In: Electronic Manufacturing Technology Symposium (IEMT), 2008 33rd IEEE/CPMT International. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 1-8. ISBN 9781424433926 (print), 9781424433933 (electronic) ISSN 1089-8190 (doi:10.1109/IEMT.2008.5507801)

Durairaj, R., Man, Lam Wai, Ekere, N.N. and Mallik, S. (2010) The effect of wall-slip formation on the rheological behaviour of lead-free solder pastes. Materials and Design, 31 (3). pp. 1056-1062. ISSN 0261-3069 (doi:10.1016/j.matdes.2009.09.051)

Durairaj, R., Man, Lam Wai, Ramesh, S., Wea, Lim Chia, Leng, Eu Poh, Ekere, N.N., Mallik, S. and Seman, A. (2009) Investigation of wall-slip effect on lead-free solder paste and isotropic conductive adhesives. In: Electronics Packaging Technology Conference, 2009. EPTC '09. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 422-426. ISBN 978-1-4244-5099-2 (print), 978-1-4244-5100-5 (e-ISBN) (doi:10.1109/EPTC.2009.5416511)

Durairaj, R., Ramesh, S., Mallik, S., Seman, A. and Ekere, N. (2009) Rheological characterisation and printing performance of Sn/Ag/Cu solder pastes. Materials and Design, 30 (9). pp. 3812-3818. ISSN 0261-3069 (doi:10.1016/j.matdes.2009.01.028)

Durairaj, Rajkumar (2006) Rheological characterisation of solder pastes and isotropic conductive adhesives (ICAs) for microsystems assembly technology. PhD thesis, University of Greenwich.

Durairaj, Rajkumar, Ekere, Ndy, Salam, B., Jackson, G. and He, Da (2003) Monte Carlo study of solder paste microstructure and ultra-fine-pitch stencil printing. Journal of Materials Science: Materials in Electronics, 14 (8). pp. 501-506. ISSN 0957-4522 (doi:10.1023/A:1023929119055)

Durairaj, Rajkumar, Mallik, Sabuj and Ekere, Ndy (2008) Solder paste characterisation: towards the development of quality control (QC) tool. Soldering & Surface Mount Technology, 20 (3). pp. 34-40. ISSN 0954-0911 (doi:10.1108/09540910810885705)

Durairaj, Rajkumar, Mallik, Sabuj, Seman, Anton, Marks, Antony and Ekere, Ndy (2008) Investigation of wall-slip effect on paste release characteristic in flip-chip stencil printing process. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1328-1333. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763615)

Durairaj, Rajkumar, Man, Lam Wai, Mallik, Sabuj and Ekere, Ndy (2009) Thixotropic studies of lead-based solder, lead-free solder and conductive adhesive pastes. In: 11th Electronic Material and Packaging Conference (EMAP), 1-3 Dec 2009, Penang, Malaysia. (Unpublished)

Durowju, Olasunkanmi, Arshad, Kamran and Moessner, Klaus (2011) Cognitive time variant power control in slow fading mobile channels. In: 2011 IEEE 73rd Vehicular Technology Conference Proceedings. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA. ISBN 9781424483327 ISSN 1550-2252 (doi:10.1109/VETECS.2011.5956556)

Durowoju, Olasunkanmi, Arshad, Kamran and Moessner, Klaus (2011) Distributed power control algorithm for cognitive radios with primary protection via spectrum sensing under user mobility. Ad Hoc Networks, 10 (5). pp. 740-751. ISSN 1570-8705 (doi:10.1016/j.adhoc.2011.02.005)

Durowoju, Olasunkanmi, Arshad, Kamran and Moessner, Klaus (2013) Distributed power control and user selection algorithms for cognitive radios. In: 2013 IEEE Vehicular Technology Conference (VTC Fall). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-5. ISBN 9781467361873 ISSN 1090-3038 (doi:10.1109/VTCFall.2013.6692164)

Durowoju, Olasunkanmi, Arshad, Kamran and Moessner, Klaus (2011) Distributed power control for cognitive radio networks, based on incumbent outage information. In: 2011 IEEE International Conference on Communications (ICC) ICC 2011. Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA. ISBN 978-1-61284-232-5 ISSN 1550-3607 (doi:10.1109/icc.2011.5962937)

Durowoju, Olasunkanmi, Arshad, Kamran and Moessner, Klaus (2010) Distributed power control for cognitive radios with primary protection via spectrum sensing. In: 2010 IEEE 72nd Vehicular Technology Conference Fall Proceedings. Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA. ISBN 9781424435739 ISSN 1090-3038 (doi:10.1109/VETECF.2010.5594306)

Dussaillant, A., Bastianon, E. and Bertoldi, W. (2012) Outburst floods and morphology of Colonia and Baker rivers, Patagonia: climate change, extreme flood impacts and sustainable hydropower. In: European Geosciences Union General Assembly 2012, 22-27 April 2012, Vienna, Austria.

Dussaillant, Alejandro (2012) Hidrologia de Humedales Costeros de Chile Central: El caso de la Reserva El Yali. In: Fariña, José Miguel and Camaño, Andrés, (eds.) Humedales Costeros: Aportes científicos a su gestión sustentable. Ediciones UC, Santiago, Chile, pp. 251-288. ISBN 978956141259-0

Dussaillant, Alejandro (2012) Stormwater management. Water & Sewerage Journal, 39 (2/2012).

Dussaillant, Alejandro, Benito, Gerardo, Buytaert, Wouter, Carling, Paul, Meier, Claudio and Espinoza, Fabián (2009) Repeated glacial-lake outburst floods in Patagonia: An increasing hazard? Natural Hazards, 54 (2). pp. 469-481. ISSN 0921-030X (Print), 1573-0840 (Online) (doi:10.1007/s11069-009-9479-8)

Dussaillant, Alejandro, Buytaert, Wouter, Meier, Claudio and Espinoza, Fabián (2012) Hydrological regime of remote catchments with extreme gradients under accelerated change: the Baker basin in Patagonia. Hydrological Sciences Journal, 57 (8). pp. 1530-1542. ISSN 0262-6667 (Print), 2150-3435 (Online) (doi:10.1080/02626667.2012.726993)

Dussaillant, Alejandro, Galdames, Pablo and Sun, Chi-Le (2009) Water level fluctuations in a coastal lagoon: El Yali Ramsar wetland, Chile. Desalination, 246 (1-3). pp. 202-214. ISSN 0011-9164 (doi:10.1016/j.desal.2008.03.053)

Dyrøy, Are (2006) Quantification and mitigation of segregation in the handling of alumina in aluminium production. PhD thesis, University of Greenwich.

Eadie, R. and Gao, James (2008) An industrial implementation of a methodology for the optimisation of product design tolerances. In: Kai, Cheng, Makatsoris, Harris C. and Harrison, David, (eds.) Advances in manufacturing technology XXII: the proceedings of the 6th International Conference on Manufacturing Research ICMR08, 9th-11th September 2008, London UK. Brunel University College, Brunel University, pp. 161-170. ISBN 9781902316604

Ejale, O., Siddique, N. B. and Seals, R. (2012) 2-Dimensional finger gesture based mobile robot control using touch screen. International Scholarly and Scientific Research & Innovation, International Science Index, 6 (12). pp. 228-233.

Ekere, N and Mallik, Sabuj (2008) A methodology for characterising new lead-free solder paste formulations used for flip-chip assembly applications. In: Kobayashi, Akira, (ed.) Smart processing technology: SPT '07. High Temperature Society of Japan, Ibaraki, Japan, pp. 59-64.

Ekere, Ndy, Durairaj, Rajkumar, Mallik, Sabuj, Marks, Antony, Bauer, R. and Winter, M. (2006) Rheological characterisation of new lead-free solder paste formulations for flip-chip assembly. ESTC 2006: 1st Electronics Systemintegration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, pp. 995-1000. ISBN 1424405521 (doi:10.1109/ESTC.2006.280132)

Ekere, Ndy, Mallik, Sabuj, Durairaj, Rajkumar and Marks, Antony (2007) A study of the rheological properties of lead free solder paste formulations used for flip-chip interconnection. 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. IEEE/CPM International Electronics Manufacturing Technology Symposium . IEEE, New York, USA, pp. 165-171. ISBN 9781424413355 (doi:10.1109/IEMT.2007.4417065)

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2007) Effect of abandon time on print quality and rheological characteristics for lead-free solder pastes used for flip-chip assembly. 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. Ieee/Cpmt International Electronics Manufacturing Technology Symposium . Institute of Electrical and Electronics Engineers, New York, USA, pp. 14-19. ISBN 9781424413355 (doi:10.1109/IEMT.2007.4417048)

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2008) Effect of long-term aging on the rheological characteristics and printing performance of lead-free solder pastes used for flip-chip assembly. Smart Processing Technology, 2. pp. 131-134.

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy and Mallik, Sabuj (2011) Advanced thermal management materials for heat sinks used in microelectronics. In: EMPC-2011: 18th European Microelectronics and Packaging Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-8. ISBN 9781467306942

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy, Mallik, Sabuj, Amalu, Emeka and Otiaba, Kenny (2011) Investigation of effects of heat sinks on thermal performance of microelectronic package. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 127-132. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145164)

Ekpu, Mathias, Bhatti, Raj, Okereke, M.I., Mallik, Sabuj and Otiaba, Kenny (2013) The effect of thermal constriction on heat management in a microelectronic application. Microelectronics Journal, 45 (2). 159 - 166. ISSN 0026-2692 (doi:10.1016/j.mejo.2013.10.011)

Ekpu, Mathias, Bhatti, Raj, Okereke, Michael I., Mallik, Sabuj and Otiaba, Kenny (2013) Fatigue life of lead-free solder thermal interface materials at varying bond line thickness in microelectronics. Microelectronics Reliability, 54 (1). 239 - 244. ISSN 0026-2714 (doi:10.1016/j.microrel.2013.08.006)

El Atrash, Mohamed and Wang, Yi (2014) A circularly polarised antenna for a wireless blood-flow sensor. In: 2014 IEEE MTT-S International Microwave Workshop Series on RF and Wireless Technologies for Biomedical and Healthcare Applications (IMWS-Bio). IEEE International Microwave Workshop Series . Institute of Electrical and Electronics Engineers Inc., Piscataway, NJ, USA, pp. 1-3. ISBN 9781479954452 (doi:10.1109/IMWS-BIO.2014.7032388)

El Kaliouby, Rana, Robinson, Peter and Keates, Simeon (2003) Temporal context and the recognition of emotion from facial expression. In: HCI International 2003 Proceedings: Human-Computer Interaction: Theory and Practice. Part II. CRC Press, Crete, Greece, pp. 631-635. ISBN 978-0805849349

Eluma, Gabriel and Arshad, Kamran (2013) Indoor statistical channel modelling using Agilent 8960. In: Proceedings of the 2013 International Conference on Current Trends in Information Technology. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 265-269. ISBN 9781479924257 (doi:10.1109/CTIT.2013.6749515)

Eneh, T., Rapajic, P. and Anang, K. (2011) Adaptive MMSE multiuser receivers in MIMO OFDM wireless communication. In: Communication Technology (ICCT), 2010 12th IEEE International Conference on. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 934-937. ISBN 978-1-4244-6868-3 (doi:10.1109/ICCT.2010.5688544)

Eneh, T., Rapajic, P., Anang, K., Bakalis, P. and Bello, L. (2012) Information capacity of adaptive MIMO OFDM wireless communication systems. In: Adaptive Science and Technology (ICAST). Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 157-164. ISBN 978-1-4673-0758-1 (doi:10.1109/ICASTech.2011.6145168)

Eneh, T., Rapajic, P., Anang, K.A. and Bello, Lawal (2012) Adaptive MMSE Multiuser Detection in MIMO OFDM wireless communication system. In: Advanced Materials Research. Scientific Net, pp. 233-240. ISBN 978-3-03785-270-5 ISSN 1662-8985 (doi:10.4028/www.scientific.net/AMR.367.233)

Eneh, T., Rapajic, P., Oletu, G., Anang, K. and Bello, L. (2011) Adaptive MMSE multiuser detection for MIMO OFDM over turbo-equalization for single-carrier transmission wireless channel. In: IWCMC 2011 - 7th International Wireless Communications and Mobile Computing Conference. IEEE Computer Society, Piscataway, USA, pp. 1408-1412. ISBN 9781424495399 (doi:10.1109/IWCMC.2011.5982744)

Eneh, Titus, Oletu, Grace O., Anang, Kwashie A., Rapajic, Predrag and Eze, J.U. (2011) Adaptive vector precoding for multiuser MIMO OFDM. In: International Conference on ICT for Africa 2011 (ICT4Africa 2011), 23-26 March 2011, Covenant University, Otta, Nigeria. (Submitted)

Eneh, Titus, Rapajic, Predrag, Anang, Kwashie, Bello, L. and Qureshi, Athar (2010) Information capacity of the communications systems with adaptive MMSE receivers. In: International Conference On Future Information Technology (ICFIT 2010), 14-15 Dec 2010, Changsha, Hunan, China.

Eneh, Titus Ikechukwu (2011) Adaptive MMSE multiuser receivers in MIMO OFDM wireless communication systems. PhD thesis, University of Greenwich.

Eneh, Titus Ikechukwu, Oletu, Grace, Rapajic, Predrag, Anang, Kwashie and Bello, Lawal (2011) Adaptive multiuser receivers scheme for MIMO OFDM over iterative-equalization for single-carrier transmission. Journal of Emerging Trends in Engineering and Applied Sciences (JETEAS), 2 (2). pp. 282-288. ISSN 2141-7016

Engemand, Stine Klit and Keates, Simeon (2010) Towards more humane calendar applications. In: Khalid, Halimahtun, Hedge, Alan and Ahram, Tareq Z., (eds.) Advances in Ergonomics Modeling and Usability Evaluation. Advances in Human Factors and Ergonomics Series . CRC Press: Taylor & Francis Group, Boca Raton, FL, USA, pp. 412-421. ISBN 978-1-4398-3503-6 (doi:10.1201/EBK1439835036-45)

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2011) Centrifugal tester versus a novel design to measure particle adhesion strength and investigation of effect of physical characteristics (size, shape, density) of food particles on food surfaces. Journal of Food Engineering, 104 (4). pp. 518-524. ISSN 0260-8774 (doi:10.1016/j.jfoodeng.2011.01.008)

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2009) Direct measurement of powder flavor adhesion onto crisp surface using a novel adhesion tester. Particulate Science and Technology, 27 (4). pp. 362-372. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:10.1080/02726350902994035)

Ermis, Ertan (2011) Establishment of a repeatable test procedure for measuring adhesion strength of particulates in contact with surfaces. PhD thesis, University of Greenwich.

Ermis, Ertan, Farnish, Richard J., Berry, Rob and Bradley, Michael S. A. (2008) Direct measurement of powder flavour adhesion on to a food surface using a novel adhesion tester. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 803-810. ISBN 9788272062896

Ettefaghian, Alireza (2015) Automated input data management in manufacturing process simulation. PhD thesis, University of Greenwich.

Evans, Richard, Gao, James, Owodunni, Oladele, Shah, Satya, Mahdikha, Sara, Messaadia, Mourad and Baudry, David (2014) A framework for improving the sharing of manufacturing knowledge through micro-blogging. In: Grabot, Bernard, Vallespir, Bruno, Gomes, Samuel, Bouras, Abdelaziz and Kiritsis, Dimitris, (eds.) Advances in Production Management Systems: Innovative Knowledge-Based Produce (proceedings of the) International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS, Part I. Springer Berlin Heidelberg, Germany, pp. 19-26. ISBN 978-3-662-44738-3 ISSN 1868-4238 (doi:10.1007/978-3-662-44739-0_3)

Evans, Richard D., Gao, James X., Martin, Nick and Simmonds, Clive (2012) An investigation into the potential use of social media technologies to improve the product development functions within the aerospace and defence industry. In: Proceedings of the 10th International Conference on Manufacturing Research (ICMR2012). Advances in Manufacturing Technology XXVI, 2 . Aston Business School, Birmingham, UK, pp. 718-723. ISBN 9781905866601

Evans, Richard David, Gao, James Xiaoyu, Martin, Nick and Simmonds, Clive (2014) Using Web 2.0-based groupware to facilitate collaborative design in engineering education scheme projects. In: Proceedings of 2014 International Conference on Interactive Collaborative Learning (ICL). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 397-402. ISBN 9781479944378 (doi:10.1109/ICL.2014.7017805)

Evans, Richard David, Gao, James Xiaoyu, Woodhead, Steve, Martin, Nick and Simmonds, Clive (2012) An investigation into collaboration and knowledge management during product development in the aerospace and defence industry. In: KMIS 2012 - Proceedings of the International Conference on Knowledge Management and Information Sharing, Barcelona, Spain, 4-7 October, 2012. SciTePress, pp. 113-118. ISBN 9789898565310

Falconer, Robert E., Boughton, B. and Paterson, F. (2010) Strengthening of masonry bridges against traffic and flooding. In: Structural Faults and Repair 2010 13th International Congress and Exhibition, 15-17 June 2010, Edinburgh.

Fang, Yongfeng, Tao, Wenliang and Tee, Kong Fah (2014) Reliability analysis of repairable k-out-n system from time response under several times stochastic shocks. Smart Structures & Systems, 14 (4). pp. 559-567. ISSN 1738-1584 (Print), 1738-1991 (Online) (doi:10.12989/sss.2014.14.4.559)

Fang, Yongfeng, Xiong, Jianbin and Tee, Kong Fah (2014) An iterative hybrid random-interval structural reliability analysis. Earthquakes and Structures, 7 (6). pp. 1061-1070. ISSN 2092-7614 (Print), 2092-7622 (Online) (doi:10.12989/eas.2014.7.6.1061)

Faramarzi, Asaad (2009) Design of microstructure and topological optimisation of auxetic materials. In: IStructE Young Researchers' Conference 2009, 18 Mar 2009, Instiute of Structural Engineers, London, UK.

Faramarzi, Asaad and Alani, Amir M. (2014) Assessing the remaining safe life of concrete sewer pipes using stochastic finite element method. In: ACME2014. Proceedings of the 22nd UK National Conference of the Association for Computational Mechanics in Engineering. University of Exeter, Exeter, UK, Exeter, UK, pp. 152-155. ISBN 978-0-902746-30-5

Faramarzi, Asaad and Alani, Amir M. (2013) EPR-based material modelling of soils. In: European Geosciences Union General Assembly, EGU2013, 7-12 Apr 2013, Vienna, Austria.

Faramarzi, Asaad and Alani, Amir M. (2013) Probabilistic analysis of sewer pipes using finite element method. In: Civil Engineering Abstracts. Third Annual International Conference on Civil Engineering, 10-13 June 2013, Athens, Greece. The Athens Institute for Education and Research, Athens, Greece, p. 22. ISBN 9789609549585

Faramarzi, Asaad, Alani, Amir M. and Javadi, Akbar A. (2013) An EPR-based self-learning approach to material modelling. Computers & Structures, 137. pp. 63-71. ISSN 0045-7949 (doi:10.1016/j.compstruc.2013.06.012)

Faramarzi, Asaad, Alani, Morteza and Harireche, Ouahid (2013) A hybrid approach to design materials with negative linear compressibility. Computational Materials Science, 79. pp. 971-976. ISSN 0927-0256 (doi:10.1016/j.commatsci.2013.08.007)

Faramarzi, Asaad and Javadi, Akbar (2008) Dynamic analysis of steel plate shear wall. In: IStructE Young Researchers' Conference 2008, 19 March 2008, London, UK. (Unpublished)

Faramarzi, Asaad, Javadi, Akbar and Ahangar-Asr, Alireza (2013) Numerical implementation of EPR-based material models in finite element analysis. Computers and Structures, 118. pp. 100-108. ISSN 0045-7949 (doi:10.1016/j.compstruc.2012.10.002)

Faramarzi, Asaad, Javadi, Akbar A. and Alani, Amir M. (2012) EPR-based material modelling of soils considering volume changes. Computers & Geosciences, 48. pp. 73-85. ISSN 0098-3004 (doi:10.1016/j.cageo.2012.05.015)

Faramarzi, Asaad, Mehravar, Moura, Veladi, Hedayat, Javadi, Akbar A., Ahangar-Asr, Alireza and Mehravar, Maziar (2011) A hysteretic model for steel plate shear walls. In: Proceedings of the 19th UK National Conference of the Association for Computational Mechanics in Engineering. Heriot-Watt University, Edinburgh, Scotland, UK, pp. 69-72. ISBN 9780956595119

Farnish, R. (2007) Common handling problems in bulk granular material. Aluminium International Today, 19 (3). pp. 38-40. ISSN 1475-455X

Farnish, R. (2009) Dosing of powders into processes - is your process control screwed? Bulk Solids Handling, 29 (5). pp. 278-281. ISSN 0173-9980

Farnish, R. (2002) Perfecting powder storage & discharge. Chemical Processing, 65 (7). pp. 24-28. ISSN 0009-2630

Farnish, R. (2007) Segregation of iron ores. Steel Times International, 31 (5). pp. 24-27. ISSN 0143-7798

Farnish, R.J. (2004) Choosing the right storage vessel for your continuous operation. Powder and Bulk Engineering, 18 (11). pp. 33-37. ISSN 0897-6627

Farnish, R.J. (2003) Feeding of the 5,000 (-ton silo). Powder and Bulk Engineering, 17 (5). p. 10. ISSN 0897-6627

Farnish, R.J. (1997) Power consumption and profit margins - less is more. Powder Handling and Processing, 9 (4). pp. 355-357. ISSN 0934-7348

Farnish, R.J. (2007) A changing world demands realistic expectations. Powder and Bulk Engineering, 21 (6). p. 8. ISSN 0897-6627

Farnish, R.J., Berry, R. and Bradley, M. (2008) Development of a novel - filling technique loading bulk particulate materials into tankers or processes. Bulk Solids Handling, 28 (4). pp. 238-241. ISSN 0173-9980

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2011) Testing of powders for sensitivity to air effect segregation. Powder Metallurgy, 54 (4). pp. 468-470. ISSN 0032-5899 (Print), 1743-2901 (Online) (doi:10.1179/174329011X13073642060730)

Farnish, Richard (2010) Tackling powder handling problems. Industrial Minerals. pp. 59-60.

Farnish, Richard J. (2008) Fine in the lab not equal fine for the process. The Chemical Engineer (802). pp. 36-37. ISSN 0302-0797

Farnish, Richard J., Kulkarni, Prasanna and Bradley, Michael S. A. (2008) Segregation of bulk particulates through multiple process handling steps. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 505-510. ISBN 9788272062896

Fei, Genyuan (2011) A methodology for engineering design change analysis using system modelling and knowledge management technologies. PhD thesis, University of Greenwich.

Fei, Genyuan, Gao, James, Owodunni, Oladele and Tang, X. (2011) A model-driven and knowledge-based methodology for engineering design change management. Computer-Aided Design and Applications, 8 (3). pp. 373-382. ISSN 1686-4360 (doi:10.3722/cadaps.2011.373-382)

Fei, Genyuan, Gao, James, Owodunni, Oladele and Tang, X. Q. (2009) A methodology for engineering design change management using modelling and problem solving techniques. In: Hinduja, Srichand and Li, Lin, (eds.) Proceedings of the 36th International MATADOR Conference. Springer, US, pp. 179-182. ISBN 978-1-84996-432-6_41 (doi:10.1007/978-1-84996-432-6_41)

Fei, Genyuan, Gao, James, Owodunni, Oladele and Tang, Xiaoqing (2011) A method for engineering design change analysis using system modelling and knowledge management techniques. International Journal of Computer Integrated Manufacturing, 24 (6). pp. 535-551. ISSN 1362-3052 (electronic), 0951-192X (paper) (doi:10.1080/0951192X.2011.562544)

Ferdowsi, Mohsen, Grau Unda, Iñaki, Karfopoulos, Evangelos, Papadopoulos, Panagiotis, Skarvelis-Kazakos, Spyros, Cipcigan, Liana, Raab, Andreas F., Dimeas, Aris, Abbasi, Ehsan and Strunz, Kai (2010) Controls and EV aggregation for virtual power plants. Project Report. MERGE.

Gandhi Jeyaraj, S. and Habtay, Yehdego (2011) Effective and efficient circuit breaker analysis. IET 2011 Conference on Reliability of Transmission and Distribution Networks (RTDN 2011). pp. 1-6. (doi:10.1049/cp.2011.0532)

Gao, James and Baxter, David (2008) Editorial for the special issue of RCIM for ICMR2005: Third International Conference on Manufacturing Research, Cranfield University, September 6th–9th 2005, Cranfield, UK. Robotics and Computer-Integrated Manufacturing, 24 (4). pp. 499-500. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.001)

Gao, James and Baxter, David (2007) Enabling technologies and frameworks for new product development: a selection of papers from ICMR2005. International Journal of Production Research, 45 (7). pp. 1485-1487. ISSN 0020-7543 (doi:10.1080/00207540600942201)

Gao, James, Baxter, David, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2007) An engineering design knowledge reuse methodology using process modelling. Research in Engineering Design, 18 (1). pp. 37-48. ISSN 0934-9839 (doi:10.1007/s00163-007-0028-8)

Gao, James, Baxter, David, Doultsinou, Nancy and Roy, Rajkumar (2007) Identification of service knowledge types for technical product-service systems. Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath, pp. 549-555.

Gao, James, Baxter, David and Roy, Rajkumar (2009) Managing knowledge within the manufacturing enterprise: an overview. International Journal of Manufacturing Technology and Management (IJMTM), 18 (2). pp. 183-209. ISSN 1368-2148 (doi:10.1504/IJMTM.2009.026193)

Gao, James, Baxter, David and Roy, Rajkumar (2007) Specifying a design life cycle knowledge reuse framework part 1: manufacturing knowledge. Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.

Gao, James and Bradfield, Daniel J. (2007) A methodology to facilitate knowledge sharing in the new product development process. International Journal of Production Research, 45 (7). pp. 1489-1504. ISSN 0020-7543 (doi:10.1080/00207540600942227)

Gao, James, Bradfield, Daniel J. and Soltan, Hossein (2007) Development of a tool to support the dissemination of information about knowledge in multilingual product development teams. In: Garetti, Marco, Terzi, Sergio, Ball, Peter D. and Han, Soonhung, (eds.) Proceedings of the International conference on product lifecycle management: assessing the industrial relevance. Inderscience Enterprises Ltd, Genva Aeroport, pp. 261-270. ISBN 9780907776321

Gao, James, Bradfield, Daniel J. and Soltan, Hossein (2007) A metaknowledge approach to facilitate knowledge sharing in the global product development process. Computer-Aided Design and Applications, 4 (1-4). pp. 519-528. ISSN 1686-4360 (doi:10.3722/cadaps.2007.519-528)

Gao, James, Cheung, W.M., Bramall, D.G., Maropoulos, Paul G. and Aziz, Hayder (2006) Organizational knowledge encapsulation and re-use in collaborative product development. International Journal of Computer Integrated Manufacturing, 19 (7). pp. 736-750. ISSN 0951-192X (doi:10.1080/09511920500504479)

Gao, James, Fei, Genyuan and Tang, X.Q. (2009) A TRIZ based methodology for the analysis of the coupling problems in complex engineering design. In: Proceedings of the 19th CIRP Design Conference – Competitive Design. Cranfield University Press, Cranfield University, pp. 285-292. ISBN 9780955743641

Gao, James and Jian, Amanda (2007) A multi-agent based knowledge search methodology for product development. Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.

Gao, James and Kuang, Li (2007) A framework to integrate manufacturing information systems. In: Cunha, Pedro Filipe and Maropoulos, Paul G., (eds.) Digital enterprise technology perspectives and future challenges. Springer, New York, pp. 369-376. ISBN 9780387498638 (doi:10.1007/978-0-387-49864-5)

Gao, James, Lee, Chen-Han and Li, Yingguagan (2015) From computer-aided to intelligent machining: Recent advances in computer numerical control machining research. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229 (7). pp. 1087-1103. ISSN 0954-4054 (Print), 2041-2975 (Online) (doi:10.1177/0954405414560622)

Gao, James and Sharma, R. (2007) A knowledge-based manufacturing and cost evaluation system for product design/re-design. The International Journal of Advanced Manufacturing Technology, 33 (9-10). pp. 856-865. ISSN 0268-3768 (doi:10.1007/s00170-006-0530-6)

Gao, James, Zhang, Pengcheng, Baxter, David and Kalta, Mo (2007) Developing a design process model for the reuse of knowledge. Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.

Giddaluru, Muni Prasad, Gao, J.X. and Bhatti, Raj (2015) A modular product structure based methodology for seamless information flow in PLM system implementation. Computer-Aided Design and Applications, 12 (6). pp. 742-752. ISSN 1686-4360 (Print), 1686-4360 (Online) (doi:10.1080/16864360.2015.1033339)

Godarzi, Davood M., Arshad, Kamran, Ko, Youngwook and Moessner, Klaus (2012) Selecting users in energy-efficient collaborative spectrum sensing. In: 2012 IEEE Wireless Communications and Networking Conference (WCNC). IEEE, Piscataway, NJ, USA, pp. 1029-1033. ISBN 978-1-4673-0436-8 ISSN 1525-3511 (doi:10.1109/WCNC.2012.6213924)

Goodfellow, N., Nadjai, A., Tee, Kong-Fah, Ali, F. and Choi, S.K (2009) Fire composite floor cellular steel beams for buildings. In: The International Conference on Applications of Structural Fire Engineering, 19-20 February 19-20 2009, Prague, Czech Republic.

Granic, A., Keates, S. and Adams, R. (2008) Are ambient intelligent applications more universally accessible? In: 2nd International Conference on Applied Ergonomics (AEI), 14–18 July 2008, Las Vegas, Nevada, USA.

Grau, I., Papadopoulos, P., Skarvelis-Kazakos, S., Cipcigan, L.M. and Jenkins, N. (2010) Virtual power plants with electric vehicles. In: 2nd European Conference on SmartGrids and E-Mobility, 20-21 Oct 2010, Brussels, Belgium. (Unpublished)

Grau, I., Skarvelis-Kazakos, S., Papadopoulos, P., Cipcigan, L.M. and Jenkins, N. (2010) Electric vehicles support for intentional islanding: A prediction for 2030. In: 41st North American Power Symposium. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 1-5. ISBN 978-1-4244-4428-1 (Print), 978-1-4244-4429-8 (Online) (doi:10.1109/NAPS.2009.5484016)

Grau Unda, I., Papadopoulos, P., Skarvelis-Kazakos, S., Cipcigan, L.M. and Jenkins, N. (2011) Energy storage for balancing a local distribution network area. In: Carbone, Rosario, (ed.) Energy Storage in the Emerging Era of Smart Grids. InTech, New York, USA, pp. 301-320. ISBN 978-953-307-269-2 (doi:10.5772/18305)

Gunning, Peter, Gunning, Robert, Maries, Alan and Hills, Colin (2015) SAPICO2: Production of sustainable construction aggregates through cementation with carbon dioxide. In: WASCON 2015 – Santander, 10–12 June 2015. WASCON 2015, Santander, Spain. (Submitted)

Gunning, Peter, Hills, Colin, Carey, Paula, Greig, Stephen and Schilling, Malte (2012) Carbonation of MSWI APCr for re-use as a light-weight aggregate. In: Ash Utilisation 2012: Ashes in a Sustainable Society, January 25-27, 2012, Stockholm, Sweden.

Gunning, Robert and Hills, Colin (2015) SAPICO2: UK and French Waste Processing and Development. In: International SAPICO2 Conference, 19 March 2015, Amiens, France.

Guo, Zaoyang, Shi, Xiaohao, Chen, Yang, Chen, Huapeng, Peng, Xiongqi and Harrison, Philip (2014) Mechanical modeling of incompressible particle-reinforced neo-Hookean composites based on numerical homogenization. Mechanics of Materials, 70. pp. 1-17. ISSN 0167-6636 (doi:10.1016/j.mechmat.2013.11.004)

Gupta, S. P., Keates, S. and Clarkson, P. J. (2003) Usability Considerations in the Design of Handheld Electronic Devices. In: DS 31: Proceedings of ICED 03, the 14th International Conference on Engineering Design, Stockholm: Innovation. The Design Society, Stockholm, Sweden, pp. 117-118. ISBN 1-904670-00-8

Hamadani, Ehsan and Rakocevic, Veselin (2007) TCP Contention Control: a cross layer approach to improve TCP performance in multihop ad hoc networks. In: Boavida, Fernando, Monteiro, Edmundo, Mascolo, Saverio and Koucheryavy, Yevgeni, (eds.) Wired/Wireless Internet Communications: 5th International Conference, WWIC 2007, Coimbra, Portugal, May 23-25, 2007. Proceedings. Lecture Notes in Computer Science (4517). Springer, Berlin / Heidelberg, pp. 1-16. ISBN 978-3-540-72694-4 (doi:10.1007/978-3-540-72697-5_1)

Hannan, Md Abdul and Arshad, Kamran (2013) An experimental study of interference in smart buildings. In: 2013 First International Conference on Communications, Signal Processing and their Applications (ICCSPA'13). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA. ISBN 9781467328203 (doi:10.1109/ICCSPA.2013.6487240)

Hanson, V. L., Brezin, J. P., Crayne, S., Keates, S., Kjeldsen, R., Richards, J. T., Swart, C. and Trewin, S. (2005) Improving Web accessibility through an enhanced open-source browser. IBM Systems Journal, 44 (3). pp. 573-588. ISSN 0018-8670 (doi:10.1147/sj.443.0573)

Harireche, Ouahid, Mehravar, Moura and Alani, Amir M. (2014) Soil conditions and bounds to suction during the installation of caisson foundations in sand. Ocean Engineering, 88. pp. 164-173. ISSN 0029-8018 (doi:10.1016/j.oceaneng.2014.06.033)

Harireche, Ouahid, Mehravar, Moura and Alani, Amir M. (2013) Suction caisson installation in sand with isotropic permeability varying with depth. Applied Ocean Research, 43. pp. 256-263. ISSN 0141-1187 (doi:10.1016/j.apor.2013.10.008)

Harireche, Ouahid, Verdin, Patrick, Thompson, Chris P. and Hammond, David W. (2008) Explicit finite volume modeling of aircraft anti-icing and de-icing. Journal of Aircraft, 45 (6). pp. 1924-1936. ISSN 0021-8669 (doi:10.2514/1.34855)

Harrison, L. J., Clarkson, P. J. and Keates, S. (2001) Inclusive design: user capabilities and product demands. In: Design Methods for Performance and Sustainability 13th International Conference on Engineering Design - ICED 01. Iced Series, 3 (28). John Wiley & Sons, Glasgow, UK, pp. 299-306. ISBN 978-1860583568

Hasan, Md Mehedi and Arshad, Kamran (2013) Robust home automation scheme using cognitive ZigBee network. In: 2013 20th International Conference on Telecommunications (ICT). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA. ISBN 9781467364256 (doi:10.1109/ICTEL.2013.6632127)

Hasan, Syed M. (2013) A collaborative framework for feasibility analysis in automotive product development with global supply chain. PhD thesis, University of Greenwich.

Hasan, Syed M., Gao, James, Wasif, Muhammad and Iqbal, Syed A. (2014) An integrated decision making framework for automotive product development with the supply chain. In: Procedia CIRP. Elsevier B.V., pp. 10-18. ISSN 2212-8271 (doi:10.1016/j.procir.2014.10.004)

Hasan, Syed M., Shah, Satya and Gao, James (2012) A collaboration framework for product development in extended enterprise. In: Proceedings of the 10th International Conference on Manufacturing Research (ICMR2012), 11th-13th September 2012. Advances in Manufacturing Technology, 2 (26). Aston Business School, Birmingham, UK, pp. 736-741. ISBN 9781905866601

Hettiaratchi, Kaushika (2006) A comparison between the pressure gradients in vertical and horizontal pneumatic conveying, with an investigation into the effect of pipeline bore in vertical conveying. PhD thesis, University of Greenwich.

Hieu, L.C., Bussa, C.U., Singhal, K., Hieu, N.V., Okereke, M.I. and Zlatov, N. (2012) Innovative design technology: An optimal surgical aid system for Hip Resurfacing Arthroplasty. In: Innovative Production Machines And Systems - 6th I*Proms Virtual Conference. lulu.com, pp. 49-54. ISBN 978-1471050268

Hieu, L.C., Vander Sloten, J., Bohez, E., Phien, H.N., Vatcharaporn, E., An, P.V., To, N.C. and Binh, P.H. (2004) A cheap technical solution for cranioplasty treatments. Technology and Health Care, 12 (3). pp. 281-292. ISSN 0928-7329 (Print), 1878-7401 (Online)

Hieu, L.C., Zlatov, N., Vander Sloten, J., Bohez, E., Khanh, L., , P.H. Binh, P.H., Oris, P. and Toshev, Y. (2005) Medical rapid prototyping applications and methods. Assembly Automation, 25 (4). pp. 284-292. ISSN 0144-5154 (doi:10.1108/01445150510626415)

Hills, Colin (2015) SAPICO2 Project: Setting the scene. In: International SAPICO2 Conference, 17 March 2015, Amiens, France. (Submitted)

Hinduja, S., Mansor, M.S.A. and Owodunni, O.O. (2010) Voronoi-diagram-based linking of contour-parallel tool paths for two-and-a-half-dimensional closed-pocket machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (9). pp. 1329-1350. ISSN 0954-4054 (Print), 2041-2975 (Online) (doi:10.1243/09544054JEM1596)

Hofman, Christopher and Keates, Simeon (2013) Countering brandjacking in the digital age – and other hidden risks to your brand. SpringerBriefs in Computer Science . Springer-Verlag, London. ISBN 978-1447155799 ISSN 2191-5768 (doi:10.1007/978-1-4471-5580-5)

Hoo, Nick, Jackson, Gavin, Hendriksen, Mike, Lu, Hua, Durairaj, Rajkumar, Bailey, Chris, Ekere, Ndy and Wright, Jonathon (2004) In-situ synchrotron x-ray diffraction during melting and solidification of a lead-free solder paste. In: TMS 2004 133rd TMS Annual Meeting & Exhibition 2004, 14-18 Mar 2004, Charlotte, North Carolina, USA. (Unpublished)

Hossain, M., Wu, Ruiheng, Litchfield, Charan and Rapajic, Predrag (2008) Linearization of high frequency amplifier using a generalised signal-injection method: case study. In: Analog Signal Processing Conference 2008, 12 November 2008, Oxford Brookes University, Oxford, UK. (Unpublished)

Hu, Luo-quan, Zhu, Hong-bo and Chen, Yifan (2009) Probability distribution of stochastic rays and its applications. Journal of Electronics & Information Technology, 31 (6). pp. 1405-1409. ISSN 1009-5896 (doi:10.3724/SP.J.1146.2007.01018)

Hussain, Tariq, Kaialy, Waseem, Deng, Tong, Bradley, Mike S.A., Nokhodchi, Ali and Armour-Chélu, David (2012) Measurement of electrostatic charge on particles using a novel approach. International Journal of Pharmaceutics, 441 (1-2). pp. 781-789. ISSN 0378-5173 (doi:10.1016/j.ijpharm.2012.10.002)

Hussain, Tariq, Kaialy, Waseem, Deng, Tong, Bradley, Mike S.A., Nokhodchi, Ali and Armour-Chélu, David (2012) A novel sensing technique for measurement of magnitude and polarity of electrostatic charge distribution across individual particles. International Journal of Pharmaceutics, 441 (1-2). pp. 781-789. ISSN 0378-5173 (doi:10.1016/j.ijpharm.2012.10.002)

Hwang, F., Keates, S., Langdon, P. and Clarkson, J. (2005) A submovement analysis of cursor trajectories. Behaviour & Information Technology, 24 (3). pp. 205-217. ISSN 0144-929X (Print), 1362-3001 (Online) (doi:10.1080/01449290412331327474)

Hwang, F., Keates, S., Langdon, P. and Clarkson, P. J. (2002) Assistive haptic interfaces for motion-impaired users. In: Engineering in Medicine and Biology, 2002. 24th Annual Conference and the Annual Fall Meeting of the Biomedical Engineering Society EMBS/BMES Conference, 2002, 23-26 October 2002, Houston, Texas, USA.

Hwang, F., Keates, S., Langdon, P. and Clarkson, P. J. (2002) Using cursor measures to determine appropriate computer input assistance for motion-impaired users. In: Engineering in Medicine and Biology, 2002. 24th Annual Conference and the Annual Fall Meeting of the Biomedical Engineering Society EMBS/BMES Conference, 2002. Proceedings of the Second Joint. IEEE, pp. 2437-2438. ISBN 0-7803-7612-9 ISSN 1094-687X (Print), 23-26 October 2002 Houston, Texas, USA (Online) (doi:10.1109/IEMBS.2002.1053363)

Hwang, F., Keates, S., Langdon, P. M. and Clarkson, P. J. (2004) Movement time prediction for tasks assisted by force-feedback. In: Keates, Simeon, Clarkson, John, Langdon, Patrick and Robinson, Peter, (eds.) Design for a more inclusive world. Springer-Verlag London, UK, pp. 143-152. ISBN 978-1-4471-1046-0

Hwang, F., Langdon, P., Clarkson, P.J. and Keates, S. (2005) A haptic toolbar for motion-impaired users. In: The 11th International Conference on Human Computer Interaction (HCII 2005), 22-27 Jul 2005, Las Vegas, USA.

Hwang, F., Langdon, P., Keates, S., Clarkson, P. J. and Robinson, P. (2002) Cursor characterisation and haptic interfaces for motion-impaired users. In: Universal access and assistive technology: Proceedings of the Cambridge workshop on UA and AT ’02. Springer-Verlag, London, UK, pp. 87-96. ISBN 978-1-4471-3721-4 (doi:10.1007/978-1-4471-3719-1_9)

Hwang, Faustina, Keates, Simeon, Langdon, Patrick and Clarkson, John (2004) Mouse movements of motion-impaired users: a submovement analysis. In: ASSETS 04 The 6th International ACM SIGACCESS Conference on Assistive Technologies. ACM, New York, NY, USA, pp. 102-109. ISBN 1-58113-911-X (doi:10.1145/1028630.1028649)

Hwang, Faustina, Keates, Simeon, Langdon, Patrick, Clarkson, P John and Robinson, Peter (2001) Perception and haptics: towards more accessible computers for motion-impaired users. In: Proceedings of the 2001 workshop on Perceptive user interface. ACM, New York, NY, USA. (doi:10.1145/971478.971507)

Hwang, Faustina, Keates, Simeon, Langdon, Patrick and Clarkson, P. John (2005) Movement time for motion-impaired users assisted by force-feedback: effects of movement amplitude, target width, and gravity well width. Universal Access in the Information Society, 4 (2). pp. 85-95. ISSN 1615-5289 (Print), 1615-5297 (Online) (doi:10.1007/S10209-005-0114-5)

Hwang, Faustina, Keates, Simeon, Langdon, Patrick and Clarkson, P. John (2003) Multiple haptic targets for motion-impaired computer usersrs. In: Proceedings of the SIGCHI Conference on Human Factors in Computing Systems. ACM, Fort Lauderdale, pp. 41-48. ISBN 1-58113-630-7 (doi:10.1145/642611.642620)

Hwang, Faustina, Langdon, Patrick, Clarkson, P. John and Keates, Simeon (2005) A model of cursor movement for multiple haptic targets. In: 3rd International Conference on Universal Access in Human-Computer Interaction, 22-27 July 2005, Las Vegas, Nevada, USA.

Hwang, Faustina, Langdon, Patrick, Keates, Simeon and Clarkson, John (2001) Haptic assistance to improve computer access for motion-impaired users. In: EuroHaptics 2001, 1-4th July 2001, Birmingham, UK.

Hwang, Faustina, Langdon, Patrick, Keates, Simeon and Clarkson, P. John (2003) The effect of multiple haptic distractors on the performance of mtion-impaired users. In: EuroHaptics 2003, 6-9 July 2003, Dublin, Ireland.

Imran, Muhammad Ali and Arshad, Kamran (2013) Increasing the interaction time in a lecture by integrating flipped classroom and just-in-time teaching concepts. Compass: Journal of Learning and Teaching, 4 (7). ISSN 2044-0081

Jaimes-Vera, Aline, Llamas-Garro, Ignacio, Ke, Maolong, Wang, Yi, Lancaster, Michael J. and Pradell, Lluís (2011) U-Band micromachined coaxial filter. In: 2011 IEEE MTT-S International Microwave Workshop Series on Millimeter Wave Integration Technologies. Insitute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 184-187. ISBN 9781612849638 (doi:10.1109/IMWS3.2011.6061871)

James, M.N., Christopher, C.J., Lu, Yanwei, Tee, K.F. and Patterson, E.A. (2011) Crack tip shielding from a plastic 'inclusion'. Key Engineering Materials, 465 (1). pp. 1-8. ISSN 1662-9795 (doi:10.4028/www.scientific.net/KEM.465.1)

Javadi, A.A., Ahangar-Asr, A., Johari, A., Faramarzi, A. and Toll, D. (2012) Modelling stress-strain and volume change behaviour of unsaturated soils using an evolutionary based data mining technique, an incremental approach. Engineering Applications of Artificial Intelligence, 25 (5). pp. 926-933. ISSN 0952-1976 (doi:10.1016/j.engappai.2012.03.006)

Javadi, A.A., Faramarzi, A. and Ahangar-Asr, A. (2009) An intelligent finite element method. In: Proceedings of the 17th UK Conference on Computational Mechanics. Spencer Institute of Theoretical and Computational Mechanics, Unversity of Nottingham, Nottingham, UK, pp. 307-310. ISBN 9780853582557

Javadi, A.A., Faramarzi, A., Ahangar-Asr, A. and Mehravar, M. (2010) Intelligent finite element method in geotechnical engineering. In: Proceedings of the 18th UK Conference on Computational Mechanics (ACME-UK). ACME, Southampton, UK, pp. 89-92.

Javadi, A.A., Johari, A., Ahangar-Asr, A., Faramarzi, A. and Toll, D.G. (2009) Using evolutionary polynomial regression in modelling of unsaturated soils. In: Proceedings of the 17th UK Conference on Computational Mechanics. Spencer Institute of Theoretical and Computational Mechanics, Unversity of Nottingham, Nottingham, UK, pp. 353-356. ISBN 9780853582557

Javadi, Akbar, Faramarzi, Asaad, Ahangar-Asr, Alireza and Mehravar, Moura (2010) Finite element analysis of three dimensional shallow foundation using artificial intelligence based constitutive model. In: Computing in Civil and Building Engineering, Proceedings of the International Conference (icccbe2010), Nottingham 30 June - 2 July. Nottingham University Press, Nottingham, UK. ISBN 9781907284601

Javadi, Akbar, Faramarzi, Asaad, Farmani, Raziyeh and Evans, Ken (2009) Design of microstructure and topological optimisation of auxetic materials. In: Proceedings of the 17th UK Conference on Computational Mechanics. Spencer Institute of Theoretical and Computational Mechanics, Unversity of Nottingham, Nottingham, UK, pp. 251-260. ISBN 9780853582557

Javadi, Akbar, Faramarzi, Asaad, Mehravar, Moura and Ahangar-Asr, Alireza (2011) EPR-based finite element analysis of soils under cyclic loading. In: Proceedings of the 19th UK National Conference of the Association for Computational Mechanics in Engineering. Heriot-Watt University, Edinburgh, Scotland, UK, pp. 57-60. ISBN 9780956595119

Javadi, Akbar A., Ahangar-Asr, Alireza, Faramarzi, Asaad and Mottaghifard, Nasim (2012) An EPR approach to the modeling of civil and geotechnical engineering systems. In: Yang, Xin-She, Gandomi, Amir Hossein, Talatahari, Siamak and Alavi, Amir Hossein, (eds.) Metaheuristics in Water, Geotechnical and Transport Engineering. Elsevier Inc., Waltham, MA, USA, pp. 311-326. ISBN 978-0-12-398296-4 (doi:10.1016/B978-0-12-398296-4.00013-1)

Javadi, Akbar A., Faramarzi, Asaad and Ahangar-Asr, Alireza (2012) Analysis of behaviour of soils under cyclic loading using EPR-based finite element method. Finite Elements in Analysis and Design, 58. pp. 53-65. ISSN 0168-874X (doi:10.1016/j.finel.2012.04.005)

Javadi, Akbar A., Faramarzi, Asaad and Alani, Amir (2012) Intelligent computational solutions for constitutive modelling of materials in finite element analysis. In: ACME2012: Proceedings of the 20th UK National Conference of the Association for Computational Mechanics in Engineering. The University of Manchester, Manchester, UK, pp. 321-324. ISBN 9780903808064

Javadi, Akbar A., Faramarzi, Asaad and Farmanai, Raziyeh (2012) Design and optimization of microstructure of auxetic materials. Engineering Computations, 29 (3). pp. 260-276. ISSN 0264-4401 (doi:10.1108/02644401211212398)

Javadi, Akbar A., Faramarzi, Asaad, Farmani, Raziyeh and Mehravar, Moura (2010) Optimizing microstructure of auxetic materials. In: Proceedings of the 8th Association for Structural and Multidisciplinary Optimization in the UK (ASMO-UK). Queen Mary University of London. (Unpublished)

Javadi, Akbar A., Mehravar, Moura, Faramarzi, Asaad and Ahangar-Asr, Alireza (2009) An artificial intelligence based finite element method. ISAST Transactions on Computers and Intelligent Systems, 1 (2). pp. 1-7. ISSN 1798-2448

Jenal, R. B., Staszewski, W. J., Scarpa, F. and Tee, K.-F. (2009) Damage detection in smart chiral sandwich structures using nonlinear acoustics. In: 20th International Conference on Adaptive Structures and Technologies (ICAST), 20-22 October 2009, Hong Kong, China.

Jenner, Robert Peter (2000) Investigation of the suitability of amorphous semiconductors as sensors for optical process tomography. PhD thesis, University of Greenwich.

Jian, Guo (2011) Knowledge search for new product development: a multi-agent based methodology. PhD thesis, University of Greenwich.

Jian, Guo, Gao, James and Wang, Yinglin (2010) A multi-agent based knowledge search framework to support the product development process. International Journal of Computer Integrated Manufacturing, 23 (3). pp. 237-247. ISSN 0951-192X (doi:10.1080/09511920903529222)

John, Clarkson and Keates, Simeon (2002) Preface. Universal access and assistive technology: Proceedings of the Cambridge workshop on UA and AT ’02. Springer-Verlag, London, UK, v-vi. ISBN 978-1-4471-3721-4 (doi:10.1007/978-1-4471-3719-1)

John, U. E., Jefferson, Ian F., Ghataora, Gurmel S., Boardman, D. I. and Hills, Colin (2012) Time dependent leachability and potential environmental implications from stabilization/solidification treatment of chromium contaminated clay. In: 5th International Symposium on Contaminated Sediments: Restoration of Aquatic Environment. ASTM International, West Conshohocken, PA, US. ISBN 9780803175402 (doi:10.1520/STP104250)

Jones, Mark G. (1988) The influence of bulk particulate properties on pneumatic conveying performance. PhD thesis, Thames Polytechnic.

Kanakis, T., Litchfield, C. and Rapajic, P. (2009) Adaptive virtual relaying MIMO decode and forward. In: Wireless Communications & Signal Processing. Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ, USA, pp. 1-5. ISBN 978-1-4244-5668-0 (electronic), 978-1-4244-4856-2 (print) (doi:10.1109/WCSP.2009.5371515)

Kanakis, Triantafyllos and Rapajic, Predrag B. (2008) Radio propagation modeling for capacity optimization in wireless relay MIMO systems with partial CSI. In: 2008 IEEE 10th International symposium on spread spectrum techniques and applications. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 211-215. ISBN 9781424422036 (doi:10.1109/ISSSTA.2008.44)

Kao, A. and Pericleous, K. (2012) The effect of secondary arm growth on thermoelectric magnetohydrodynamics. Magnetohydrodynamics, 48 (2). pp. 361-370. ISSN 0024-998X

Karfopoulos, Evangelos L., Papadopoulos, Panagiotis, Skarvelis-Kazakos, Spyros, Grau, Inaki, Cipcigan, Liana M., Hatziargyriou, Nikos and Jenkins, Nick (2011) Introducing electric vehicles in the microgrids concept. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082212)

Kargel, J.S., Alho, P., Buytaert, W., Célleri, R., Cogley, J.G., Dussaillant, A., Guido, Z., Haeberli, W., Harrison, S., Leonard, G., Maxwell, A., Meier, C., Poveda, G., Reid, B., Reynolds, J., Portocarrero Rodríguez, C.A., Romero, H. and Schneider, J. (2012) Glaciers in Patagonia: Controversy and prospects. Eos, Transactions American Geophysical Union, 93 (22). p. 212. ISSN 2324-9250 (Online) (doi:10.1029/2012EO220011)

Keates et al. (2008) System and method for correcting positioning and triggering errors for aim-and-trigger devices. US20080266252 A1.

Keates, S. and Clarkson, P. J. (2002) Countering design exclusion. In: Universal access and assistive technology: Proceedings of the Cambridge workshop on UA and AT ’02. Springer-Verlag, London, UK, pp. 33-42. ISBN 978-1-4471-3721-4 (doi:10.1007/978-1-4471-3719-1_4)

Keates, S., Clarkson, P. J., Harrison, L. A. and Robinson, P. (2000) Towards a practical inclusive design approach. [Working Paper]

Keates, S., Clarkson, P. J. and Robinson, P. (1998) Developing a methodology for the design of accessible interfaces. In: 4th ERCIM Workshop on "User Interfaces for All", 19-21 October 1998, Stockholm, Sweden.

Keates, S., Clarkson, P. J. and Robinson, P. (1999) Gesture input and motion-impaired users. [Working Paper]

Keates, S., Clarkson, P. J. and Robinson, P. (1999) User modelling and motion-impaired users. [Working Paper]

Keates, S., Clarkson, P. J. and Robinson, P. (1999) A design approach for accessibility. In: Bullinger, Hans-Jorg and Ziegler, Jurgen, (eds.) Human-Computer Interaction: Communication, Cooperation, and Application Design. CRC Press, pp. 878-882. ISBN 9780805833928

Keates, S. and Clarkson, P.J. (2003) Countering design exclusion: bridging the gap between usability and accessibility. Universal Access in the Information Society, 2 (3). pp. 215-225. ISSN 1615-5289 (Print), 1615-5297 (Online) (doi:10.1007/S10209-003-0059-5)

Keates, S. and Clarkson, P.J. (2002) Defining Design Exclusion. In: Universal access and assistive technology: Proceedings of the Cambridge workshop on UA and AT ’02. Springer-Verelag, London, pp. 13-22. ISBN 978-1-4471-3721-4 (doi:10.1007/978-1-4471-3719-1_2)

Keates, S. and Dowland, R. (1997) User modelling and the design of computer-based assistive devices. In: Computers in the Service of Mankind: Helping the Disabled (Digest No.: 1997/117), IEE Colloquium on. IET, London, UK, 9/1-9/3. (doi:10.1049/ic:19970638)

Keates, S., Hwang, F., Langdon, P., Clarkson, P.J. and Robinson, P. (2002) The use of cursor measures for motion-impaired computer users. Universal Access in the Information Society, 2 (1). pp. 18-29. ISSN 1615-5289 (Print), 1615-5297 (Online) (doi:10.1007/S10209-002-0033-7)

Keates, S., Hwang, F., Langdon, P. M., Clarkson, P. J. and Robinson, P. (2001) Using cursor control measures to suggest methods of cursor assistance for motion-impaired users. [Working Paper] (doi:Technical Report CUED/C-EDC/TR113)

Keates, S., Langdon, P., Clarkson, P. J. and Robinson, P. (eds.) (2002) Proceedings of CWUAAT '02, 1st Cambridge Workshop on Universal Access and Assistive Technology (CWUAAT), incorporating 4th Cambridge Workshop on Rehabilitation Robotics. Department of Engineering, University of Cambridge, Cambridge, UK.

Keates, S., Lebbon, C. and Clarkson, J. (2000) Investigating industry attitudes to universal design. In: Proceedings of the RESNA 2000 Annual Conference: Technology for the New Millennium. RESNA Press, Orlando, Florida, pp. 276-278. ISBN 0-932101-42-9 ISSN 0883-4741

Keates, S., Potter, R., Perricos, C. and Robinson, P. (1997) Gesture recognition - Research and clinical perspectives. In: Proceedings of the RESNA '97 Annual Conference: let's tango : partnering people and technology. RESNA Press, Pittsburgh, PA, pp. 333-335. ISBN 9780932101389

Keates, S. and Robinson, P. (1997) The role of user modelling in rehabilitation robotics. In: Proceedings ICORR '97: International Conference on Rehabilitation Robotics. Bath Institute of Medical Engineering, Bath, UK, pp. 75-78. ISBN 978-1857900347

Keates, S., Varker, P. and Spowart, F. (2011) Human-machine design considerations in advanced machine-learning systems. IBM Journal of Research and Development, 55 (5). 4:1-4:10. ISSN 0018-8646 (doi:10.1147/JRD.2011.2163274)

Keates, Simeon (2005) BS 7000-6:2005 Design management systems. Managing inclusive design. Guide. British Standards Institution, London, UK.

Keates, Simeon (2015) Defining acceptable interaction for universal access. In: Antona, Margherita and Stephanidis, Constantine, (eds.) Universal Access in Human-Computer Interaction. Access to Today's Technologies. Lecture Notes in Computer Science (9175). Springer, pp. 54-63. ISBN 978-3-319-20677-6 (doi:10.1007/978-3-319-20678-3_6)

Keates, Simeon (2007) Defining acceptable levels of accessibility. In: Universal Access in Ambient Intelligence Environment. 9th ERCIM Workshop on User Interfaces for All, 2006. Revised Papers. Part III. Lecture Notes in Computer Science, 4397 . Springer Berlin Heidelberg, Heidelberg, pp. 287-303. ISBN 978-3-540-71024-0 ISSN 0302-9743 (doi:10.1007/978-3-540-71025-7_19)

Keates, Simeon (2014) Design for the value of inclusiveness. In: van den Hoven, Jeroen, Vermaas, Pieter E. and van de Poel, Ibo, (eds.) Handbook of Ethics, Values and Technological Design. Springer Netherlands, pp. 1-17. ISBN 978-94-007-6994-6 (doi:10.1007/978-94-007-6994-6_15-1)

Keates, Simeon (2006) Designing for accessibility: A business guide to countering design exclusion. Human Factors and Ergonomics . CRC Press. ISBN 9780805860962

Keates, Simeon (2008) Designing for accessibility: Extending UI design approaches to hardware. In: 2nd International Conference on Applied Ergonomics (AEI), 14–18 July 2008, Las Vegas, Nevada, USA.

Keates, Simeon (2008) Designing for accessibility: exploring fundamental issues. In: 2nd International Conference on Applied Ergonomics (AEI), 14–18 July 2008, Las Vegas, Nevada, USA.

Keates, Simeon (2012) Designing user interfaces for “ordinary users in extraordinary circumstances”: a keyboard-only web-based application for use in airports. Universal Access in the Information Society, 12 (2). pp. 205-216. ISSN 1615-5289 (Print), 1615-5297 (Online) (doi:10.1007/s10209-012-0276-x)

Keates, Simeon (2004) Developing BS7000 Part 6 – Guide to Managing Inclusive Design. In: User-Centered Interaction Paradigms for Universal Access in the Information Society. Revised Selected Papers of the 8th ERCIM Workshop on User Interfaces for All 2004. Part IV. Lecture Notes in Computer Science, 3196 . Springer Berlin Heidelberg, Germany, pp. 332-339. ISBN 978-3-540-23375-6 ISSN 0302-9743 (doi:10.1007/978-3-540-30111-0_29)

Keates, Simeon Engineering Design for Mechatronics – A pedagogical perspective. Mechatronics Futures. Springer, pp. 209-226.

Keates, Simeon (2000) Foreword. In: Keates, Anita, (ed.) Dyslexia and Information and Communications Technology: A Guide for Teachers and Parents. Overseas Series Maps Series . David Fulton Publishers, Virginia, USA, v-vii. ISBN 9781853466519

Keates, Simeon (2009) Inclusive design for ordinary users in extraordinary circumstances. In: Universal Access in Human-Computer Interaction. Addressing Diversity. 5th International Conference, UAHCI 2009, Proceedings, Part I. Lecture Notes in Computer Science, 5614 . Springer Berlin Heidelberg, Germany, pp. 525-534. ISBN 978-3-642-02706-2 ISSN 0302-9743 (doi:10.1007/978-3-642-02707-9_59)

Keates, Simeon (2004) Investigating the Inclusivity of Digital Television Set-Top Boxes. In: User-Centered Interaction Paradigms for Universal Access in the Information Society: Revised Selected Papers from the 8th ERCIM Workshop on User Interfaces for All. Part IV. Lecture Notes in Computer Science, 3196 . Springer Berlin Heidelberg, Germany, pp. 340-359. ISBN 978-3-540-23375-6 ISSN 0302-9743 (doi:10.1007/978-3-540-30111-0_30)

Keates, Simeon (2016) Measuring acceptable input: What is "good enough"? Universal Access in the Information Society. ISSN 1615-5289 (Print), 1615-5297 (Online) (In Press)

Keates, Simeon (2009) Motor impairments and universal access. In: Stephanidis, Constantine, (ed.) Universal Access Handbook. Human Factors and Ergonomics, 14 . CRC Press: Taylor and Francis Group, Boca Raton, FL, USA, 5.1-5.14. ISBN 978-0-8058-6280-5 (doi:10.1201/9781420064995-c5)

Keates, Simeon (2006) Pragmatic research issues confronting HCI practitioners when designing for universal access. Universal Access in the Information Society, 5 (3):269-278. pp. 269-278. ISSN 1615-5289 (Print), 1615-5297 (Online) (doi:10.1007/s10209-006-0050-z)

Keates, Simeon (2004) Report on 2nd Cambridge Workshop on Universal Access and Assistive Technology (CWUAAT 2004). Newsletter ACM SIGACCESS Accessibility and Computing, 79. pp. 4-5. ISSN 1558-2337 (Print), 1558-1187 (Online)

Keates, Simeon (2011) Teaching the next generation of universal access designers: a case study. In: Universal Access in Human-Computer Interaction. Design for All and eInclusion: 6th International Conference, UAHCI 2011, Proceedings, Part I. Lecture Notes in Computer Science, 6765 . Springer Berlin Heidelberg, Berlin, Germany, pp. 70-79. ISBN 978-3-642-21671-8 ISSN 0302-9743 (Print), 1611-3349 (Online) (doi:10.1007/978-3-642-21672-5_9)

Keates, Simeon (2015) A pedagogical example of teaching Universal Access. Universal Access in the Information Society, 14 (1). pp. 97-110. ISSN 1615-5289 (Print), 1615-5297 (Online) (doi:10.1007/s10209-014-0398-4)

Keates, Simeon and , Simeon (2005) Research methods for supporting the design of interfaces for universal access. In: 3rd International Conference on Universal Access in Human-Computer Interaction, 22-27 July 2005, Las Vegas, Nevada, USA.

Keates, Simeon, Adams, Ray, Bodine, Cathy, Czaja, Sara, Gordon, Wayne, Gregor, Peter, Hacker, Emily, Hanson, Vicki, Kemp, John, Laff, Mark, Clayton, Lewis, Pieper, Michael, Richards, John, Rose, David, Savidis, Anthony, Schultz, Greg, Snayd, Paul, Trewin, Shari and Varker, Philip (2007) Cognitive and learning difficulties and how they affect access to IT systems. Universal Access in the Information Society, 5 (4). pp. 329-339. ISSN 1615-5289 (Print), 1615-5297 (Online) (doi:10.1007/s10209-006-0058-4)

Keates, Simeon, Bradley, David and Sapeluk, Andrew (2013) The future of universal access? merging computing, design and engineering. In: Universal Access in Human-Computer Interaction. Applications and Services for Quality of Life: 7th International Conference, UAHCI 2013. Proceedings, Part III. Lecture Notes in Computer Science, 8011 . Springer Berlin Heidelberg, pp. 54-63. ISBN 978-3-642-39193-4 ISSN 0302-9743 (Print), 1611-3349 (Online) (doi:10.1007/978-3-642-39194-1_7)

Keates, Simeon, Clarkeson, John and Robinson, Peter (2002) Providing access to e-information for older adults. In: BCS HCI 2002, 3rd September, 2002, South Bank University, London, UK.

Keates, Simeon, Clarkeson, John and Robinson, Peter (2003) The design of kiosks for providing access to e-information for older adults. In: Universal Access in HCI: Inclusive Design in the Information Society. Human Factors and Ergonomics, 4 . CRC Press, Crete, Greece, pp. 852-856. ISBN 9780805849332

Keates, Simeon and Clarkson, John (2003) Countering Design Exclusion. In: Clarkson, John, Coleman, Roger, Keates, Simeon and Lebbon, Cherie, (eds.) Inclusive Design: Design for the Whole Population. Springer-Verlag London, London, pp. 438-457. ISBN 978-1-4471-0001-0

Keates, Simeon and Clarkson, John (2003) Design exclusion. In: Clarkson, John, Coleman, Roger, Keates, Simeon and Lebbon, Cherie, (eds.) Inclusive Design: Design for the Whole Population. Springer-Verlag London, London, pp. 88-107. ISBN 978-1-4471-0001-0

Keates, Simeon and Clarkson, John (2004) Preface. In: Keates, Simeon, Clarkson, John, Langdon, Patrick and Robinson, Peter, (eds.) Designing a more inclusive world. Springer-Verlag London, UK, v-vi. ISBN 978-1-4471-1046-0 ISSN 0963-5432 (Online) (doi:10.1007/978-0-85729-372-5)

Keates, Simeon and Clarkson, John (2004) Preface. In: Keates, Simeon, Clarkson, P. John, Langdon, Patrick and Robinson, Peter, (eds.) Proceedings of the 2nd Cambridge Workshop on Universal Access and Assistive Technology (incorporating the 5th Cambridge Workshop on Rehabilitation Robotics): Designing a more inclusive world. Department of Engineering, University of Cambridge, Cambridge, UK, vii-viii.

Keates, Simeon and Clarkson, John (2003) Supporting the adoption of inclusive design practices. In: International Conference on Inclusive Design and Communications (INCLUDE 2003), 25-18 Mar 2003, Royal College of Art, London, UK.

Keates, Simeon and Clarkson, John (1999) Towards a generic approach for designing for all users. In: Proceedings of 22nd Resna Annual Conference: Spotlight on Technology. RESNA PRESS, Long Beach, CA, pp. 97-99. ISBN 978-0932101419

Keates, Simeon, Clarkson, John, Coy, Joanne and Robinson, Peter (1999) Universal access in the work-place: A case study. In: 5th ERCIM Workshop on "User Interfaces for All", 28 November - 1 December 1999, Dagstuhl, Germany.

Keates, Simeon, Clarkson, John, Langdon, Patrick and Robinson, Peter (eds.) (2004) Designing a more inclusive world. In: Keates, Simeon, (ed.) Proceedings of 2nd Cambridge Workshop on Universal Access and assistive Technology (CWUAAT 04). Springer-Verlag London, UK. ISBN 978-1-4471-1046-0

Keates, Simeon, Clarkson, John and Robinson, Peter (1999) Designing a usable interface for an interactive robot. In: ICORR ’99: 6th International Conference on Rehabilitation Robotics. ICORR ’99, pp. 156-162.

Keates, Simeon, Clarkson, John and Robinson, Peter (2000) Investigating the applicability of user models for motion-impaired users. In: Proceedings of the fourth international ACM conference on Assistive technologies. ACM, New York, NY, USA, pp. 129-136. ISBN 1-58113-313-8 (doi:10.1145/354324.354354)

Keates, Simeon and Clarkson, P. J. (2004) Assessing the accessibility off digital television set-top boxes. In: Keates, Simeon, Clarkson, John, Langdon, Patrick and Robinson, Peter, (eds.) Designing a more inclusive world. Springer-Verlag London, UK, pp. 183-192. ISBN 978-1-4471-1046-0

Keates, Simeon and Clarkson, P. John (2001) Combining utility, usability and accessibility methods for universal access. In: CHI 2001: Anyone. Anywhere., 31 March-5 April 2001, Seattle, Washington, United States.

Keates, Simeon and Clarkson, P. John (2003) Countering design exclusion through inclusive design. In: Proceedings of the 2003 conference on Universal usability (CUU '03). ACM New York, NY, USA © 2003, New York, NY, USA, pp. 69-76. ISBN 1-58113-701-X (doi:10.1145/957205.957218)

Keates, Simeon and Clarkson, P. John (2003) Guest editorial: Special issue on countering design exclusion. Universal Access in the Information Society, 2 (3). pp. 205-206. ISSN 1615-5289 (Print), 1615-5297 (Online) (doi:10.1007/s10209-003-0063-9)

Keates, Simeon, Clarkson, P. John, Harrison, Lee-Anne and Robinson, Peter (2000) Towards a practical inclusive design approach. In: Proceedings on the 2000 conference on Universal Usability (CUU '00 ). ACM, New York, NY, USA, pp. 45-52. ISBN 1-58113-314-6 (doi:10.1145/355460.355471)

Keates, Simeon, Clarkson, P. John, Langdon, Patrick and Robinson, Peter (eds.) (2004) Proceedings of the 2nd Cambridge Workshop on Universal Access and Assistive Technology (incorporating the 5th Cambridge Workshop on Rehabilitation Robotics): Designing a more inclusive world. Department of Engineering, University of Cambridge, Cambridge, UK.

Keates, Simeon, Clarkson, P. John and Robinson, Peter (2001) Cognitive considerations in the design of multi-modal input systems. In: Universal Access in HCI: Towards An information Society for All. Proceedings of HCI International '2001. Human Factors and Ergonomics, 3 . CRC Press, pp. 353-357. ISBN 9780805836097

Keates, Simeon, Clarkson, P. John and Robinson, Peter (2004) Design for participation: providing access to e-information for older adults. Universal Access in the Information Society, 3 (2). pp. 149-163. ISSN 1615-5289 (Print), 1615-5297 (Online) (doi:10.1007/s10209-004-0093-y)

Keates, Simeon, Clarkson, P. John and Robinson, Peter (2001) Developing a practical inclusive interface design approach. Interacting with Computers, 14 (4). pp. 271-299. ISSN 0953-5438 (Print), 1873-7951 (Online) (doi:10.1016/S0953-5438(01)00054-6)

Keates, Simeon, Clarkson, P. John and Robinson, Peter (2001) Enabling computer access for motion-impaired users. ERCIM News: Special Theme: Human Computer Interaction, 46. pp. 43-44.

Keates, Simeon, Clarkson, P. John and Robinson, Peter (2000) Gesture Input and Motion-impaired Users. In: Kent, Allen and Williams, James G., (eds.) Encyclopedia of Microcomputers: Supplement 5. CRC Press, New York, NY, USA, pp. 147-166. ISBN 978-0824727253

Keates, Simeon, Clarkson, P. John and Robinson, Peter (2001) Gesture input and motion-impaired users. In: Kent, Allen, (ed.) Encyclopedia of Library and Information Science. CRC Press, pp. 128-149. ISBN 978-0824720704

Keates, Simeon, Clarkson, P. John and Robinson, Peter (2002) Understanding how to improve the accessibility of computers through cursor control studies. In: Proceeding CHI EA '02 Extended Abstracts on Human Factors in Computing Systems: changing the world, changing ourselves. ACM, New York, NY, USA, pp. 766-767. ISBN 1-58113-454-1 (doi:10.1145/506443.506587)

Keates, Simeon, Clarkson, P. John and Robinson, Peter (2001) User modelling and motion-impaired users. In: Kent, Allen and Williams, James G., (eds.) Encyclopedia of Microcomputers: Supplement 5. CRC Press, New York, NY, USA, pp. 307-322. ISBN 9780824727253

Keates, Simeon, Kozloski, James and Varker, Philip (2009) Cognitive impairments, HCI and daily living. In: Universal Access in Human-Computer Interaction. Addressing Diversity. 5th International Conference, UAHCI 2009, Proceedings, Part I. Lecture Notes in Computer Science, 5614 . Springer Berlin Heidelberg, Germany, pp. 366-374. ISBN 978-3-642-02706-2 ISSN 0302-9743 (doi:10.1007/978-3-642-02707-9_42)

Keates, Simeon, Langdon, Patrick, Clarkson, John and Robinson, Peter (2000) Investigating the use of force feedback for motion-impaired users. In: 6th ERCIM Workshop on "User Interfaces for All", 25-26 October, 2000, Florence, Italy. (Unpublished)

Keates, Simeon, Langdon, Patrick, Clarkson, John and Robinson, Peter (eds.) (2002) Universal access and assistive technology: Proceedings of the Cambridge workshop on UA and AT ’02. In: Keates, Simeon, Langdon, Patrick, Clarkson, John and Robinson, Peter, (eds.) Proceedings of the 1st Cambridge Worksohp on Universal Access and Assistive Technology (CWUAAT 02). Springer-Verlag London, London. ISBN 978-1-4471-3721-4

Keates, Simeon, Langdon, Patrick, Clarkson, P. John and Robinson, Peter (2002) User models and user physical capability. User Models and User Physical Capability, 12 (2-3). pp. 139-169. ISSN 0924-1868 (Print), 1573-1391 (Online) (doi:10.1023/A:1015047002796)

Keates, Simeon, Langdon, Patrick, Clarkson, P. John and Robinson, Peter (2001) A practical approach to design for universal access: the Information Point case study. In: Universal Access in HCI: Towards An information Society for All. Proceedings of HCI International '2001. Human Factors and Ergonomics, 3 . CRC Press, pp. 18-22. ISBN 9780805836097

Keates, Simeon and Looms, Peter Olaf (2014) The role of simulation in designing for universal access. In: Universal access in human-computer interaction. Design and development methods for universal access. Information Systems and Applications, incl. Internet/Web, and HCI, 8513 . Springer International Publishing, Heraklion, Crete, Greece, pp. 54-63. ISBN 978-3-19-07437-5 ISSN 0302-9743 (Print), 1611-3349 (Online) (doi:10.1007/978-3-319-07437-5_6)

Keates, Simeon and Perricos, C. (1996) Gesture as a means of computer access. Communication Matters, 10 (1). pp. 17-19.

Keates, Simeon and Robinson, Peter (1999) Gestures and multimodal input. Behaviour & Information Technology, 18 (1). pp. 36-44. ISSN 0144-929X (Print), 1362-3001 (Online) (doi:10.1080/014492999119237)

Keates, Simeon and Robinson, Peter (1997) User performance modelling and cognitive load. In: Proceedings of the RESNA '97 Annual Conference: let's tango : partnering people and technology. RESNA Press, Pittsburgh, PA, pp. 342-344. ISBN 9780932101389

Keates, Simeon and Robinson, Peter (1998) The use of gestures in multimodal input. In: Assets '98 Proceedings of the third international ACM conference on Assistive technologies. ACM, New York, NY, USA, pp. 35-42. ISBN 1-58113-020-1 (doi:10.1145/274497.274505)

Keates, Simeon and Trewin, Shari (2005) Effect of age and Parkinson's disease on cursor positioning using a mouse. In: Proceedings of the 7th international ACM SIGACCESS conference on Computers and accessibility Assets '05. ACM, New York, NY, US, pp. 68-75. ISBN 1-59593-159-7 (doi:10.1145/1090785.1090800)

Keates, Simeon, Trewin, Shari and Paradise, Jessica (2005) Using pointing devices: quantifying differences across user groups. In: 3rd International Conference on Universal Access in Human-Computer Interaction, 22-27 July 2005, Las Vegas, Nevada, USA.

Keates, Simeon, Trewin, Shari and Paradise Elliott, Jessica (2005) Including users with motor impairments in design. In: Ghaoui, Claude, (ed.) Encyclopedia of Human Computer Interaction. Idea Group Inc (IGI), London, pp. 317-323. ISBN 9781591407980 (doi:10.4018/978-1-59140-562-7.ch049)

Keates, Simeon and Varker, Philip (2007) Establishing design best practices for users with cognitive and learning difficulties. In: Universal Acess in Human Computer Interaction. Coping with Diversity: Proceedings of the 4th International Conference on Universal Access in Human-Computer Interaction, UAHCI 2007, Part I. Lecture Notes in Computer Science, 4554 . Springer Berlin Heidelberg, Heidelberg, pp. 706-715. ISBN 978-3-540-73278-5 ISSN 0302-9743 (doi:10.1007/978-3-540-73279-2_78)

Keates, Simeon and Varker, Philip (2012) The Game is aFoot, Watson: DeepQA systems and the future of HCI. In: Soares, Marcelo M. and Rebelo, Francesco, (eds.) Advances in Usability Evaluation Part II. Advances in Human Factors and Ergonomics Series . CRC Press:, Boca Raton, FL, USA, pp. 341-348. ISBN 978-1-4665-6054-3 (doi:10.1201/b12324-40)

Keates, Simeon L. and Clarkson, John (2003) Countering design exclusion: an introduction to inclusive design. Springer-Verlag: London, London, UK. ISBN 978-1852337698

Kessel, Stephen Ronald (1985) The interaction between rotary valves and pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

Khan, Naushad Salim (2008) Handling characteristics of coal/biomass mixes: measurements and establishing benchmarks. PhD thesis, University of Greenwich.

Khan, Noor M., Simsim, Mohammed T. and Rapajic, Predrag B. (2008) A generalized model for the spatial characteristics of the cellular mobile channel. IEEE Transactions on Vehicular Technology, 57 (1). pp. 22-37. ISSN 0018-9545 (doi:10.1109/TVT.2007.904532)

Khosrowshahi, Farzad and Alani, Amir (2010) Visualisation of impact of time on the internal lighting of a building. Automation in Construction, 20 (2). pp. 145-154. ISSN 0926-5805 (doi:10.1016/j.autcon.2010.09.012)

Kilic, Gokhan (2012) Application of advanced non-destructive testing methods on bridge health assessment and analysis. PhD thesis, University of Greenwich.

Kiourktsoglou, George and Coutroubis, Alec (2010) Somali piracy vs. flag of attacked vessel. [Working Paper]

Kiourktsoglou, George and Coutroubis, Alec D. (2012) Is Somali piracy a random phenomenon? WMU Journal of Maritime Affairs, 11 (1). pp. 51-70. ISSN 1651-436X (Print), 1654-1642 (Online) (doi:10.1007/s13437-012-0023-4)

Klepka, A., Staszewski, W.J., Uhl, T., Di Maio, D., Scarpa, F. and Tee, K.F. (2012) Impact damage detection in composite chiral sandwich panels. Key Engineering Materials, 518. pp. 160-167. ISSN 1013-9826 (Print), 1662-9795 (Online) (doi:10.4028/www.scientific.net/KEM.518.160)

Klepka, Andrzej, Staszewski, Wieslaw J., di Maio, Dario, Scarpa, Fabrizio, Tee, Kong-Fah and Uhl, Tadeusz (2012) Sensor location analysis in nonlinear acoustics used for damage detection in composite chiral sandwich panels. Advances in Science and Technology, 83. pp. 223-231. ISSN 1662-0356 (doi:10.4028/www.scientific.net/AST.83.223)

Kofinas, Alexander and Saur-Amaral, Irina (2008) 25 years of knowledge creation processes in pharmaceutical contemporary trends. Comportamento Organizacional e Gestão (COeG), 14 (2). pp. 257-280. ISSN 0872-9662

Kosmas, P., Laranjeira, S., Dixon, J.H., Li, X. and Chen, Y. (2010) Time reversal microwave breast imaging for contrast-enhanced tumor classification. In: Engineering in Medicine and Biology Society (EMBC), 2010 Annual International Conference of the IEEE. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 708-711. ISBN 978-1-4244-4123-5 (print) ISSN 1557-170X (online) (doi:10.1109/IEMBS.2010.5626158)

Koufopoulos, Dimitrios N., Coutroubis, Alec and Lagoudis, Ioannis N. (2007) One size does not fit all: revisiting conceptual wisdom by assessing corporate governance practices of the Greek shipping management companies. In: International Association of Maritime Economists, IAME, Greece Challenges and Trends in Shipping, Markets, Investments and Policies, 4-6 July 2007, Athens. (Unpublished)

Krabicka, Jan and Lu, Gang (2009) Visualisation and characterisation of flame radical emissions through intensified spectroscopic imaging. In: Sensors & their Applications XV. Journal of Physics: Conference Series, 178 (1). IOP Publishing, Bristol, UK. ISSN 1742-6588 (Print), 1742-6596 (Online) (doi:10.1088/1742-6596/178/1/012041)

Krabicka, Jan and Lu, Gang (2010) A spectroscopic imaging system for flame radical profiling. IEEE Instrumentation and Measurement Technology Conference (I2MTC), 2010. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 1387-1391. ISBN 978-1-4244-2832-8 ISSN 978-1-4244-2832-8 (doi:10.1109/IMTC.2010.5488056)

Krabicka, Jan, Lu, Gang and Yan, Yong (2011) Profiling and characterization of flame radicals by combining spectroscopic imaging and neural network techniques. IEEE Transactions on Instrumentation and Measurement, 60 (5). pp. 1854-1860. ISSN 0018-9456 (doi:10.1109/TIM.2010.2102411)

Krabicka, Jan and Yan, Yong (2009) Finite-element modeling of electrostatic sensors for the flow measurement of particles in pneumatic pipelines. IEEE Transactions on Instrumentation and Measurement, 58 (8). pp. 2730-2736. ISSN 0018-9456 (doi:10.1109/TIM.2009.2016288)

Krabicka, Jan and Yan, Yong (2009) Optimised design of intrusive electrostatic sensors for the velocity measurement of pneumatically conveyed particles. IEEE Instrumentation and Measurement Technology Conference, 2009. I2MTC '09. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 341-345. ISBN 978-1-4244-3352-0 ISSN 1091-5281 (doi:10.1109/IMTC.2009.5168472)

Krasevac, Zarko B. and Rapajic, Predrag B. (2008) Adaptive AR channel model identification of time-varying communication systems. In: 2008 IEEE 10th International symposium on spread spectrum techniques and applications. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 618-622. ISBN 9781424422036 (doi:10.1109/ISSSTA.2008.121)

Krusevac, Snezana M., Rapajic, Predrag and Kennedy, Rodney A. (2005) Channel capacity upper bound of MIMO systems in the presence of spatially correlated noise. Proceedings Eighth International Symposium on Communication Theory and Applications - ISCTA ’05. ISCTA '05, Ambleside, Lake District, UK, pp. 298-303.

Krusevac, Snezana M., Rapajic, Predrag and Kennedy, Rodney A. (2006) Mutual coupling effect on thermal noise in multi-element antenna systems. Progress in Electromagnetics Research, 59. pp. 325-333. ISSN 1070-4698 (doi:10.2528/PIER05091103)

Krusevac, Z.B., Rapajic, P.B. and Kennedy, R.A. (2008) Communication system model for information rate evaluation of differential detection over time-varying channels. IET Communications, 2 (10). pp. 1301-1310. ISSN 1751-8628 (doi:10.1049/iet-com:20070610)

Krusevac, Zarko B., Rapajic, Predrag and Kennedy, Rodney A. (2005) Channel estimation and coding for BPSK signalling in time varying fading communication channels. Proceedings of the Eighth International Symposium on Communication Theory and Applications - ISCTA ’05. ISCTA ’05, Ambleside, Lake District, UK, pp. 467-472.

Krusevac, Zarko B., Rapajic, Predrag and Kennedy, Rodney A. (2008) Mutual information performance of differential MPSK detection over time-varying channels. Proceedings - 2008 IEEE International Symposium on Information Theory, ISIT 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 2752-2756. ISBN 9781424422562

Kulkarni, P.A., Berry, R.J. and Bradley, M.S.A. (2010) Review of the flowability measuring techniques for powder metallurgy industry. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 224 (3). pp. 159-168. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/09544089JPME299)

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2006) Predicting segregation of metal powders. Powder Metallurgy, 49 (3). pp. 206-208. ISSN 0032-5899 (Print), 1743-2901 (Online) (doi:10.1179/174329006X152442)

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2005) Segregation of metal powders. In: Euro PM 2005: Powder Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA), Prague, Czech Republic, pp. 61-66. ISBN 9781899072187

Lamahewa, Tharaka A., Sadeghi, Parastoo, Kennedy, Rodney A. and Rapajic, Predrag B. (2009) Model-based pilot and data power adaptation in psam with periodic delayed feedback. IEEE Transactions on Wireless Communications, 8 (5). pp. 2247-2252. ISSN 1536-1276 (doi:10.1109/TWC.2009.080526)

Langdon, P., Keates, S. and Clarkson, P. J. (2003) Developing cognitive capability scale for inclusive product design. In: DS 31: Proceedings of ICED 03, the 14th International Conference on Engineering Design, Stockholm: Innovation. The Design Society, Stockholm, Sweden, pp. 111-112. ISBN 1-904670-00-8

Langdon, P., Keates, S., Clarkson, P. J. and Robinson, P. (2000) Using haptic feedback to enhance computer interaction for motion-impaired users. In: Proceedings of the 3rd international conference on disability, virtual reality and associated technologies (ICDVRAT 2000). ICDVRAT 2000, Alghero, Sicily, pp. 25-32. ISBN 0704911426

Langdon, P. M., Hwang, F., Keates, S., Clarkson, P. J. and Robinson, P. (2002) Developing assistive interfaces for motion-impaired users using cursor movement analysis in conjunction with haptic feedback. In: Proceedings of the 4th international conference on disability, virtual reality and associated technologies (ICDVRAT 2002). The University of Reading, pp. 223-230. ISBN 0704911434

Langdon, P. M., Keates, S. and Clarkson, P. J. (2004) New cognitive capability scales for inclusive product design. In: Keates, Simeon, Clarkson, John, Langdon, Patrick and Robinson, Peter, (eds.) Design for a more inclusive world. Springer-Verlag London, UK, pp. 59-68. ISBN 978-1-4471-1046-0

Langdon, Patrick, Hwang, Faustina, Keates, Simeon, Clarkson, P John and Robinson, Peter (2002) Investigating haptic assistive interfaces for motion impaired users: force-channels and competitive attractive-basins. In: EuroHaptics 2002, 8-10 July, 2002, Edinburgh, UK.

Langdon, Patrick, Hwang, Faustina, Keates, Simeon, Clarkson, p. John and Robinson, Peter (2001) Investigating the Cursor Movement Parameters for Haptic Assistance of Motion-impaired Users. In: Integration of Assistive Technology in the Information Age: ICORR '2001, 7th International Conference on Rehabilitation Robotics. Assistive Technology Research Series, 9 . IOS Press, pp. 237-242. ISBN 978-1-58603-171-8 ISSN 1383-813X

Langdon, Patrick, Keates, Simeon, Clarkson, P. John and Robinson, Peter (2001) Investigating the parameters of force feedback assistance for motion-impaired users in a selection task. In: Universal Access in HCI: Towards An information Society for All. Proceedings of HCI International '2001. Human Factors and Ergonomics, 3 . CRC Press, pp. 938-942. ISBN 9780805836097

Lara Garzon, A., Arokiam, A. and Greig, N. (2012) Complexity of scheduling in SMEs specialising in high variety low volume manufacturing. In: KTP Associates Conference 2012, 14 Jun 2012, University of Brighton, Sussex, UK.

Le, C.H., Okereke, M.I., Nguyen, V.H., Dao, V.D., Soe, S., Zlatov, N. and Le, T.H. (2011) Personalised medical product development: Methods, challenges and opportunities. Romanian Review Precision Mechanics, Optics and Mechatronics, 40. pp. 11-20. ISSN 1584-5982

Le, Chi, Erick, Bohez, Huynh, Ngoc Phien, Esichaikul, Vatcharaporn, Jos, Vander Sloten, Pham, Hoa Binh, Nguyen, Cong To, Phan, Van An and Oris, Philip (2002) Design and manufacturing of personalized implants and standardized templates for cranioplasty applications. In: IEEE ICIT '02. 2002 IEEE International Conference on Industrial Technology. 'Productivity Reincarnation through Robotics and Automation'. IEEE, pp. 1025-1030. ISBN 0-7803-7657-9 (doi:10.1109/ICIT.2002.1189312)

Le, Chi, Erick, Bohez, Huynh, Ngoc Phien, Jos, Vander Sloten, Esichaikul, Vatcharaporn, Pham, Hoa Binh, Phan, Van An and Philip, Oris (2003) Design for medical rapid prototyping of cranioplasty implants. Rapid Prototyping Journal, 9 (3). pp. 175-186. ISSN 1355-2546 (doi:10.1108/13552540310477481)

Le, Chi, Erik, Bohez, Jos, Vander Sloten, Huynh, Ngoc Phien, Esichaikul, Vatcharaporn and Pham, Hoa Binh (2002) Design and Manufacturing of Implant by CNC milling. Technology and Health Care, 8 (1). ISSN 0928-7329 (Print), 1878-7401 (Online)

Le, Chi, Erik, Bohez, Le, Tan Hung, Lam, Khanh, Jos, Vander Sloten and Pham, Dinh Trung (2010) Integrated approaches for personalised cranio-maxillofacial implant design and manufacturing. In: The Third International Conference on the Development of Biomedical Engineering in Vietnam. IFMBE Proceedings, 27 . Springer Berlin Heidelberg, Berlin, Germany, pp. 118-121. ISBN 9783642120190 ISSN 9783642120206 (Online) (doi:10.1007/978-3-642-12020-6_29)

Le, Chi, Jos, Vander Sloten, Le, Tan Hung, Lam, Khanh, Soe, Shwe, Zlatov, Nikolay, Le, Tam Phuoc and Pham, Dinh Trung (2010) Medical reverse engineering applications and methods. In: Proceedings of International Conference on Innovations, Recent Trends and Challenges in Mechatronics, Mechanical Engineering and New High-Tech Products Development. INCDMTM, Bucharest, Romania, pp. 186-196.

Le, Chi, Le, Hoai Quoc, Vo, Van Thanh, Tran, Dai Nguyen, Phan, Van An, Le, Tan Hung and Lam, Khanh (2010) Current medical product development for diagnosis, surgical planning and treatment in the areas of Neurosurgery, Orthopeadic and Dental-Cranio-Maxillofacial surgery in Vietnam. In: The Third International Conference on the Development of Biomedical Engineering in Vietnam. Springer Berlin Heidelberg, Berlin, Germany, pp. 122-125. ISBN 9783642120190 ISSN 1680-0737 (doi:10.1007/978-3-642-12020-6_30)

Le, Chi, Okereke, Michael, Nguyen, Vu Hieu, Dao, Viet Dzung, Soe, Shwe, Zlatov, Nikolay and Le, Tan Hung (2011) Personalised medical product development: Methods, challenges and opportunities. In: Proceedings of International Conference On Innovations, Recent Trends And Challenges In Mechatronics, Mechanical Engineering And New High-Tech Products Development – MECAHITECH’11, vol. 3, year: 2011. INCDMTM, pp. 140-149.

Le, Chi and Pham, Duc Truong (2008) Reverse engineering: An industrial perspective. In: Vinesh, Raja and Kiran, J. Fernandes, (eds.) Reverse Engineering: An Industrial Perspective. Springer Series in Advanced Manufacturing . Springer-Verlag, London, UK. ISBN 9781846288555 (doi:10.1007/978-1-84628-856-2)

Le, Chi and Soroka, A.J. (2011) Design challenges for implementing a customer driven mass-customisation system. In: Proceedings of INDIN 2011 International Conference on Industrial Informatics. IEEE, pp. 857-862. ISBN 9781457704338. (doi:10.1109/INDIN.2011.6035005)

Leaper, M.C., Bradley, Michael S.A., Cleaver, J.A.S., Bridle, Ian, Reed, Alan R., Abou-Chakra, H. and Tüzün, Ugur (2002) Constructing an engineering model for moisture migration in bulk solids as a prelude to predicting moisture migration caking. Advanced Powder Technology, 13 (4). pp. 411-424. (doi:10.1163/156855202320536043)

Leveil, Stéphanie, Le Martret, Christophe J., Anouar, Hicham, Arshad, Kamran, Zahir, Talha, Bito, János, Celentano, Ulrico, Mange, Geneviève, Rico, Juan and Medela, Arturo (2012) Resource management of centrally controlled cognitive radio networks. In: 2012 Future Network & Mobile Summit [Conference Proceedings]. IIMC International Information Management Corporation Ltd., Dublin, Ireland. ISBN 9781905824304

Li, C.Q. and Mahmoodian, M. (2013) Risk based service life prediction of underground cast iron pipes subjected to corrosion. Reliability Engineering & System Safety, 119. pp. 102-108. ISSN 0951-8320 (doi:10.1016/j.ress.2013.05.013)

Li, C.Q. and Yang, S. (2011) Prediction of concrete crack width under combined reinforcement corrosion and applied load. Journal of Engineering Mechanics, 137 (11). pp. 722-731. ISSN 0733-9399 (Print), 1943-7889 (Online) (doi:10.1061/(ASCE)EM.1943-7889.0000289)

Li, C.Q. and Zhao, J.M. (2010) Time dependent risk assessment of combined overtopping and structural failure for reinforced concrete coastal structures. Journal of Waterway, Port, Coastal, and Ocean Engineering, 136 (2). pp. 97-103. ISSN 0733-950X (Print), 1943-5460 (Online) (doi:10.1061/(ASCE)WW.1943-5460.0000031)

Li, Chun-Qing, Mackie, Robert Ian and Lawanwisut, Wimon (2007) A risk-cost optimized maintenance strategy for corrosion-affected concrete structures. Computer-Aided Civil and Infrastructure Engineering, 22 (5). pp. 335-346. ISSN 1093-9687 (doi:10.1111/j.1467-8667.2007.00490.x)

Li, Chun-Qing and Melchers, Robert E. (2009) Reinforcement corrosion initiation and activation times in concrete structures exposed to severe marine environments. Cement and Concrete Research, 39 (11). pp. 1068-1076. ISSN ISSN: 0008-8846 (doi:10.1016/j.cemconres.2009.07.003)

Li, Chun-Qing, Melchers, Robert E., Davidson, Mark and Yang, Shangtong (2008) Condition assessment of a 63-year old reinforced concrete structure exposed to the North Sea. In: Conference on Durability of Building Materials and Components (11DBMC) "Globality and Locality in Durability", 11-14 May 2008, Istanbul, Turkey. (Unpublished)

Li, Chun-Qing and Shao, L. (2007) Reliability based asset management strategy for concrete infrastructure. International Journal of Materials and Structural Reliability, 5 (1). pp. 13-28.

Li, Chun-Qing, Yang, Yang and Melchers, Robert E. (2008) Prediction of reinforcement corrosion in concrete and its effects on concrete cracking and strength reduction. ACI Materials Journal, 105 (1). pp. 3-10. ISSN 0889-325X

Li, Chun-Qing, Zheng, J.J., Lawanwisut, Wimon and Melchers, Robert E. (2007) Concrete delamination caused by steel reinforcement corrosion. Journal of Materials in Civil Engineering, 19 (7). pp. 591-600. ISSN 0899-1561 (doi:10.1061/(ASCE)0899-1561(2007)19:7(591))

Li, Chun-Qing and Zheng, Jian Jun (2007) Closed-form solution for predicting elastic modulus of concrete. ACI Materials Journal, 104 (5). pp. 539-546. ISSN 0889-325X

Li, Fumin, Yuan, Yingshu and Li, Chun-Qing (2011) Corrosion propagation of prestressing steel strands in concrete subject to chloride attack. Construction and Building Materials, 25 (10). pp. 3878-3885. ISSN 0950-0618 (doi:10.1016/j.conbuildmat.2011.04.011)

Li, Ji (2007) A study of the solid particle erosion performance of automative and other novel low carbon steels. PhD thesis, University of Greenwich.

Li, Nanya, Li, Yingguang, Hang, Xiang and Gao, James (2013) Analysis and optimization of temperature distribution in carbon fiber reinforced composite materials during microwave curing process. Journal of Materials Processing Technology, 214 (3). pp. 544-550. ISSN 0924-0136 (doi:10.1016/j.jmatprotec.2013.10.012)

Li, Nanya, Li, Yingguang, Hao, Xiaozhong and Gao, James (2014) A comparative experiment for the analysis of microwave and thermal process induced strains of carbon fiber/bismaleimide composite materials. Composites Science and Technology, 106. pp. 15-19. ISSN 0266-3538 (doi:10.1016/j.compscitech.2014.10.008)

Li, Yingguang, Li, Nanya and Gao, James (2013) Tooling design and microwave curing technologies for the manufacturing of fiber-reinforced polymer composites in aerospace applications. The International Journal of Advanced Manufacturing Technology, 70 (1-4). pp. 591-606. ISSN 0268-3768 (Print), 1433-3015 (Online) (doi:10.1007/s00170-013-5268-3)

Li, Yingguang, Liu, Changqing, Gao, James X. and Shen, Weiming (2015) An integrated feature-based dynamic control system for on-line machining, inspection and monitoring. Integrated Computer-Aided Engineering, 22 (2). pp. 187-200. ISSN 1069-2509 (Print), 1875-8835 (Online) (doi:10.3233/ICA-150483)

Li, Yingguang, Liu, Changqing, Hao, Xiaozhong, Gao, James X. and Maropoulos, Paul G. (2015) Responsive fixture design using dynamic product inspection and monitoring technologies for the precision machining of large-scale aerospace parts. CIRP Annals - Manufacturing Technology, 64 (1). pp. 173-176. ISSN 0007-8506 (doi:10.1016/j.cirp.2015.04.025)

Li, Yingguang, Liu, Xu, Gao, James X. and Maropoulos, Paul G. (2012) A dynamic feature information model for integrated manufacturing planning and optimization. CIRP Annals - Manufacturing Technology, 61 (1). pp. 167-170. ISSN 0007-8506 (doi:10.1016/j.cirp.2012.03.085)

Liao, S., Sun, J., Chen, Y., Wang, Y. and Zhang, P. (2015) Distributed power control for wireless networks via the alternating direction method of multipliers. Journal of Network and Computer Applications, 55. pp. 81-88. ISSN 1084-8045 (doi:10.1016/j.jnca.2015.05.005)

Lu, Y., Dai, G., Wang, Yi, Liu, T. and Huang, J. (2016) Dual-band filtering power divider with capacitor-loaded central coupled-line resonators. IET Microwaves, Antennas & Propagation. ISSN 1751-8725 (In Press)

Lu, Yun-Long, Dai, Gao-Le, Wang, Yi, Liu, Taijun and Huang, Jifu (2016) Dual-Band Filtering Power Divider With Capacitor-Loaded Centrally Coupled-Line Resonators. IET Microwaves, Antennas & Propagation. pp. 1-12. ISSN 1751-8725 (Print), 1751-8733 (Online) (doi:10.1049/iet-map.2016.0217)

Lucas, S.S. (2014) Indoor environment control with functional mortars. In: Brown, Jerri, (ed.) Titanium Dioxide: Chemical Properties, Applications and Environmental Effects. Nova Science Publishers, Hauppauge, NY, USA, pp. 21-48. ISBN 9781633213913

Lucas, S.S., Ferreira, V.M. and Aguiar, J.L. Barroso de (2013) Latent heat storage in PCM containing mortars—Study of microstructural modifications. Energy and Buildings, 66. pp. 724-731. ISSN 0378-7788 (doi:10.1016/j.enbuild.2013.07.060)

Lucas, S.S., Ferreira, V.M. and de Aguiar, J.L. Barroso (2012) Incorporation of titanium dioxide nanoparticles in mortars — Influence of microstructure in the hardened state properties and photocatalytic activity. Cement and Concrete Research, 43. pp. 112-120. ISSN 0008-8846 (doi:10.1016/j.cemconres.2012.09.007)

Ma, Mingchao (2007) Distributed RBAC for subscription-based remote network services. PhD thesis, University of Greenwich.

Macchini, R., Bradley, M.S.A. and Deng, T. (2013) Influence of particle size, density, particle concentration on bend erosive wear in pneumatic conveyors. Wear, 303 (1-2). pp. 21-29. ISSN 0043-1648 (doi:10.1016/j.wear.2013.02.014)

Macpherson, Allan, Kofinas, Alexander, Jones, Oswald and Thorpe, Richard (2010) Making sense of mediated learning: cases from small firms. Management Learning, 41 (3). pp. 303-323. ISSN 1350-5076 (Print), 1461-7307 (Online) (doi:10.1177/1350507609357002)

Madduri, Sricharan and Arshad, Kamran (2013) Experimental validation of an energy efficient MAC protocol for wireless sensor network. In: 2013 First International Conference on Communications, Signal Processing and their Applications (ICCSPA'13). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA. ISBN 9781467328203 (doi:10.1109/ICCSPA.2013.6487267)

Madduri, Sricharan and Arshad, Kamran (2013) Validation of an energy efficient MAC protocol for wireless sensor network. International Journal of Computing and Digital Systems, 2 (3). pp. 103-108. ISSN 2210-142X (doi:10.12785/ijcds/020301)

Mahdikhah, Sara, Messaadia, Mourad, Baudry, David, Paquet, Thierry, Louis, Anne, Mazari, Bélahcène, Evans, Richard and Gao, James (2014) Towards supplier maturity evaluation in terms of PLM collaboration. In: Advances in Production Management Systems. Innovative and Knowledge-Based Production Management in a Global-Local World. IFIP WG 5.7 International Conference, APMS 2014, Ajaccio, France, September 20-24, 2014, Proceedings, Part I. IFIP Advances in Information and Communication Technology (438). Springer Berlin Heidelberg, Germany, pp. 201-208. ISBN 978-3-662-44738-3 ISSN 1868-4238 (doi:10.1007/978-3-662-44739-0_25)

Mahmoodian, M. (2005) Repair of concrete in marine regions. Iran Concrete Institute Quarterly, 5 (19). pp. 20-23. ISSN 1735-1987

Mahmoodian, M. and Alani, A.M. (2013) Multi-failure mode assessment of buried concrete pipes subjected to time-dependent deterioration, using system reliability analysis. Journal of Failure Analysis and Prevention, 13 (5). pp. 634-642. ISSN 1547-7029 (Print), 1864-1245 (Online) (doi:10.1007/s11668-013-9727-9)

Mahmoodian, M. and Alani, M.A. (2013) Time dependent reliability analysis of underground concrete pipes subjected to sulphide corrosion. In: Proceedings of the 11th International Conference on Structural Safety & Reliability, New York, USA, 16-20 June 2013. Safety, Reliability, Risk and Life-Cycle Performance of Structures and Infrastructures. CRC Press, New York, USA, p. 832.

Mahmoodian, M. and Li, C.Q. (2012) Sensitivity analysis in structural reliability of buried pipelines. In: ASRANet 2012 Conference, 2-4 Jul 2012, Croydon, UK.

Mahmoodian, M. and Li, C.Q. (2012) Service life prediction of underground concrete pipes subjected to corrosion. In: Concrete Solutions 2011. Concrc -The Concrete Solutions series of International Conferences on Concrete Repair . CRC Press. ISBN 9780415616225 (Hardback), 9780203134689 (ebook)

Mahmoodian, Mojtaba (2013) Reliability analysis and service life prediction of pipelines. PhD thesis, University of Greenwich.

Mahmoodian, Mojtaba and Alani, Amir (2016) Sensitivity analysis for failure assessment of concrete pipes subjected to sulphide corrosion. Urban Water Journal, 13 (6). pp. 637-643. ISSN 1573-062X (Print), 1744-9006 (Online) (doi:10.1080/1573062X.2015.1012085)

Mahmoodian, Mojtaba and Alani, Morteza (2013) Modeling deterioration in concrete pipes as a stochastic gamma process for time-dependent reliability analysis. Journal of Pipeline Systems Engineering and Practice, 5 (1). ISSN 1949-1190 (Print), 1949-1204 (Online) (doi:10.1061/(ASCE)PS.1949-1204.0000145)

Mahmoodian, Mojtaba and Li, Chun Qing (2012) Assessment of the effect of concrete properties on service life of concrete sewer pipes subjected to hydrogen sulphide attack. In: 11th International Conference on Concrete Engineering and Technology 2012 (CONCET2012). [Conference Proceedings]. 11th International Conference on Concrete Engineering and Technology 2012 (CONCET2012), pp. 212-217.

Mahmoodian, Mojtaba and Li, Chun Qing (2012) Durability assessment of corrosion affected underground concrete pipes. In: International Congress on Durability of Concrete, 18‐21 Jun 2012, Trondheim, Norway.

Mahmoodian, Mojtaba and Li, Chun Qing (2011) Structural system reliability analysis of cast iron water mains. In: 2nd Iranian Conference on Reliability Engineering, 24-26 Oct 2011, Tehran, Iran.

Mahmoodian, Mojtaba, Li, Chun Qing, Mahmoodian, Meisam and Kuchekali, A. (2012) Strength assessment of a high rise concrete building using a combined NDT and DT method. In: 11th International Conference on Concrete Engineering and Technology 2012 (CONCET2012). [Conference Proceedings]. 11th International Conference on Concrete Engineering and Technology 2012 (CONCET2012), pp. 480-485. (Unpublished)

Mahmoodian, Mojtaba and Li, Chun Qinq (2013) Failure assessment of a pre-stressed concrete bridge using time dependent system reliability method. In: 29th Annual International Bridge Conference 2012 (IBC 2012) [Conference Proceedings]. Curran Associates, Inc.. ISBN 9781627481168

Mahmud, Rashad, He, Tianhao, Lancaster, Micahel, Wang, Yi and Shang, Xiaobang (2014) Micromachined travelling wave slotted waveguide antenna array for beam-scanning applications. In: 2014 Loughborough Antennas and Propagation Conference (LAPC). IEEE. ISBN 978-1-4799-3662-5

Mallik, S., Bauer, R., Hübner, F. and Ekere, N.N. (2011) Evaluating print performance of Sn-Ag-Cu leadfree solder pastes used in electronics assembly process. In: International Conference on Advances in Materials and Processing Technologies (AMPT2010). AIP Conference Proceedings (1315/1). American Institute of Physics (AIP), Melville, NY, USA, pp. 33-38. ISBN 978-0-7354-0871-5 ISSN 0094-243X (doi:10.1063/1.3552465)

Mallik, S., Ekere, N.N. and Bhatti, R. (2010) Empirical modeling of the time-dependent structural build-up of lead-free solder pastes used in the electronics assembly applications. Journal of ASTM International, 7 (9). ISSN 1546-962X (doi:10.1520/JAI103043)

Mallik, S., Ekere, N.N., Durairaj, R., Marks, A.E. and Seman, A. (2009) Wall-slip effects in SnAgCu solder pastes used in electronics assembly applications. Materials & Design, 30 (10). pp. 4502-4506. ISSN 0261-3069 (doi:10.1016/j.matdes.2009.05.028)

Mallik, S., Ekere, N.N., Marks, A.E., Seman, A. and Durairaj, R. (2010) Modeling the structural breakdown of solder paste using the structural kinetic model. Journal of Materials Engineering and Performance, 19 (1). pp. 40-45. ISSN 1059-9495 (Print), 1544-1024 (Online) (doi:10.1007/s11665-009-9448-0)

Mallik, S., Schmidt, M., Bauer, R. and Ekere, N.N. (2010) Evaluating solder paste behaviours through rheological test methods and their correlation to the printing performance. Soldering & Surface Mount Technology, 22 (4). pp. 42-49. ISSN 0954-0911 (doi:10.1108/09540911011076871)

Mallik, Sabuj (2010) Rheological characterisation and modelling of electronic materials: time-dependent behaviours of lead-free solder pastes and flux mediums. LAP Lambert Academic Publishing GmbH & Co. KG, Saarbrücken, Germany. ISBN 978-3-8433-7771-3

Mallik, Sabuj (2009) Study of the time-dependent rheological behaviour of lead-free solder pastes and flux mediums used for flip-chip assembly applications. PhD thesis, University of Greenwich.

Mallik, Sabuj, Ekere, Ndy, Best, Chris and Bhatti, Raj (2011) Investigation of thermal management materials for automotive electronic control units. Applied Thermal Engineering, 31 (2-3). pp. 355-362. ISSN 1359-4311 (doi:10.1016/j.applthermaleng.2010.09.023)

Mallik, Sabuj, Ekere, Ndy, Durairaj, Rajkumar and Marks, Antony (2008) An investigation into the rheological properties of different lead-free solder pastes for surface mount applications. Soldering & Surface Mount Technology, 20 (2). pp. 3-10. ISSN 0954-0911 (doi:1108/09540910810871511)

Mallik, Sabuj, Ekere, Ndy, Marks, Antony, Seman, Anton and Durairaj, Rajkumar (2008) Modelling of the time-dependent flow behaviour of lead-free solder pastes used for flip-chip assembly applications. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 1219-1224. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684527)

Mallik, Sabuj, Ekere, Ndy, Seman, Anton and Durairaj, Rajkumar (2009) Modelling the time-dependent behaviour of solder pastes used in the electronics assembly applications. In: 11th Electronic Material and Packaging Conference (EMAP 2009), 1-2 Dec 2009, Penang, Malaysia. (Unpublished)

Mallik, Sabuj and Mehdawi, Ahmed Z. El (2014) Shear strength and fracture surface studies of ball grid array (BGA) flexible surface-mount electronics packaging under isothermal ageing. In: Yang, Gi-Chul, Ao, Sio-Iong and Gelman, Len, (eds.) Transactions on Engineering Technologies. Special Volume of the World Congress on Engineering 2013. Springer Netherlands, pp. 31-41. ISBN 9789401788311 (doi:10.1007/978-94-017-8832-8_3)

Mallik, Sabuj, Schmidt, M., Bauer, R. and Ekere, Ndy (2008) Influence of solder paste components on rheological behaviour. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, USA, pp. 1135-1140. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684512)

Mallik, Sabuj, Thieme, Jens, Bauer, R., Ekere, Ndy, Seman, Anton, Bhatti, Rajinderpal and Durairaj, Rajkumar (2010) Study of the rheological behaviour of Sn-Ag-Cu solder pastes and their correlation with printing performance. In: EPTC 2009 Proceedings of 2009 11th Electronics Packaging Technology Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 869-874. ISBN 978-1-4244-5099-2 (Print), 978-1-4244-5100-5 (e-ISBN) (doi:10.1109/EPTC.2009.5416423)

Mange, Geneviève, Rosik, Christophe, Leveil, Stéphanie, Celentano, Ulrico, Durowoju, Olasunkanmi and Arshad, Kamran (2011) Cognitive resource management for QoS support in mobile opportunistic communications. In: 2011 Future Network & Mobile Summit [Conference Proceedings]. lIMC International Information Management Corporation Ltd., Dublin, Ireland. ISBN 9781905824250

Maniruzzaman, Mohammed, Snowden, Martin, Bradley, Michael and Douroumis, Dionysios (2015) Studies of intermolecular interactions in solid dispersions using advanced surface chemical analysis. RSC Advances: An international journal to further the chemical sciences, 5 (91). pp. 74212-74219. ISSN 2046-2069 (Online) (doi:10.1039/C5RA13176F)

Maries, Alan and Hills, Colin (2015) Ultra-rapid hardening of cement by accelerated carbonation – Past, present and future. In: 5th International Conference on Accelerated Carbonation for Environmental and Material Engineering 2015 (ACEME). AIChE, New York, pp. 274-283. ISBN 978-1-5108-1549-0

Maries, Alan, Hills, Colin, Carey, Paula and Ostle, S-J (2013) Linked low carbon manufacture of cement and precast concrete. Advances in Applied Ceramics, 112 (4). pp. 202-206. ISSN 1743-6753 (Print), 1743-6761 (Online) (doi:10.1179/1743676112Y.0000000057)

Marks, A.E., Mallik, S., Ekere, N.N. and Seman, A. (2008) Effect of temperature on slumping behaviour of lead-free solder paste and its rheological simulation. 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 829-832. ISBN 97814244-28137 (Print), 978-1-4244-2814-4 (Electronic) (doi:10.1109/ESTC.2008.4684459)

Marks, Antony, Ekere, Ndy, Mallik, Sabuj and Bhatti, Rajinderpal (2011) Effect of particle size distribution (PSD) and flux medium on the creep recovery performance of lead-free solder pastes. Soldering and Surface Mount Technology, 23 (2). pp. 75-84. ISSN 0954-0911 (doi:10.1108/09540911111120140)

Marks, Antony Edward (2012) Characterisation of lead-free solder pastes and their correlation with the stencil printing process performance. PhD thesis, University of Greenwich.

Mason, David John (1991) A study of the modes of gas-solids flow in pipelines. PhD thesis, Thames Polytechnic.

Masroor, Ahmad (1983) Bond strength history in prestressed concrete reactor vessels. PhD thesis, Thames Polytechnic.

Maung, T.S., Chen, H.-P. and Alani, A.M. (2011) Real time structural damage assessment from vibration measurements. In: 9th International Conference on Damage Assessment of Structures (DAMAS 2011). Journal of Physics: Conference Series, 305 (1). IOP Publishing, Bristol, UK. ISSN 1742-6588 (Print), 1742-6596 (Online) (doi:10.1088/1742-6596/305/1/012096)

Mayur, Yaul, Bhatti, Rajinderpal and Lawrence, Stephen (2008) Evaluating the process of borosilicate glass capillaries used for fabrication of in-vitro fertilization (IVF) micro-pipettes. Biomedical Microdevices, 10 (1). pp. 123-128. ISSN 1387-2176 (doi:10.1007/s10544-007-9117-8)

McMillan, Stephen (2000) Design and analysis of a biometric access control system using an electronic olfactory device to identify human odour characteristics. PhD thesis, University of Greenwich.

Mehravar, Moura, Harireche, Ouahid, Faramarzi, Asaad and Alani, Amir M. (2015) Modelling the variation of suction pressure during caisson installation in sand using FLAC3D. Ships and Offshore Structures. ISSN 1744-5302 (Print), 1754-212X (Online) (In Press) (doi:10.1080/17445302.2015.1051311)

Melchers, R.E. and Li, C.Q. (2010) Predicting the life of reinforced concrete structures in severe marine environments. In: Bridge maintenance, safety, management and life-cycle optimization: Proceedings of the Fifth International conference on bridge maintenance, safety and management, Philadelphia, Pennsylvania, USA, 11-15 July 2010. Proceedings of the 5th International IABMAS Conference, 2010 (5). CRC Press, Leiden, The Netherlands, p. 314. ISBN 978-0-415-87786-2 (print), 978-0-415-89137-0 (ebook)

Melchers, R.E. and Li, C.Q. (2009) Reinforcement corrosion in concrete exposed to the North Sea for more than 60 years. CORROSION : The Journal of Science and Engineering, 65 (8). pp. 554-566. ISSN 0010-9312 (doi:10.5006/1.3319158)

Melchers, R.E., Li, C.Q. and Davison, M.A. (2009) Observations and analysis of a 63-year-old reinforced concrete promenade railing exposed to the North Sea. Magazine of Concrete Research, 61 (4). pp. 233-243. ISSN 0024-9831 (doi:10.1680/macr.2007.00093)

Melchers, Robert E., Li, Chun-Qing and Lawanwisut, Wimon (2008) Probabilistic modeling of structural deterioration of reinforced concrete beams under saline environment corrosion. Structural Safety, 30 (5). pp. 447-460. ISSN 0167-4730 (doi:10.1016/j.strusafe.2007.02.002)

Melis, W.J.C., Chizuwa, S. and Kameyama, M. (2009) Evaluation of the hierarchical temporal memory soft computing platform and its VLSI architecture. In: Multiple-Valued Logic, 2009. ISMVL '09. 39th International Symposium on. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 233-238. ISBN 978-1-4244-3841-9 ISSN 0195-623X (doi:10.1109/ISMVL.2009.11)

Melis, Wim J.C. (2015) Computing: The current and its probability based future. Where current computers struggle and how probability based computing can overcome this. LAP Lambert Academic Publishing, Saarbrücken, Germany. ISBN 9783659673566

Melis, Wim J.C. (2014) The future of electrical vehicles. In: Bizon, Nicu, Dascalescu, Lucian and Mahdavi Tabatabaei, Naser, (eds.) Autonomous Vehicles: Intelligent Transport Systems and Smart Technologies. Nova Science Publishers, Hauppauge, NY, USA, pp. 509-530. ISBN 9781633213241

Melis, Wim J.C. and Chishty, Owais (2013) Fully regenerative braking and improved acceleration for electrical vehicles. International Journal of Sustainable Energy Development (IJSED), 2 (1). pp. 75-80. ISSN 2046-3707 (doi:10.20533/ijsed.2046.3707.2013.0011)

Melis, Wim J.C., Chizuwa, Shuhei and Kameyama, Michitaka (2010) Evaluation of hierarchical temporal memory for a real world application. In: Fourth International Conference on Innovative Computing, Information and Control (ICICIC), 2009. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 144-147. ISBN 978-1424455430 (doi:10.1109/ICICIC.2009.195)

Melis, Wim J.C. and Kameyama, Michitaka (2010) A study of the different uses of colour channels for traffic sign recognition on hierarchical temporal memory. In: Innovative Computing, Information and Control (ICICIC), 2009 Fourth International Conference on. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 111-114. ISBN 978-1424455430 (doi:10.1109/ICICIC.2009.55)

Mihelčič, S.R., Pihlar, Z., Kyberd, P. and Burger, H. (2014) Ocenjevanje funkcije roke pri Bolnikih po možganski kapi s Southamptonskim testom (shap)/Hand function evaluation with the Southampton hand assessment procedure (shap) in stroke patients. Rehabilitation, XIV (1):1. pp. 4-9. ISSN 1580-9315 (Print), 2232-545X (Online)

Milusheva, S.M., Tosheva, E.Y, Le, Chi, Kouzmanov, L.V., Zlatov, N. and Toshev, Y.E. (2006) Personalised ankle-foot orthoses design based on reverse engineering. In: Intelligent Production Machines and Systems. 2nd I*PROMS Virtual International Conference. Elsevier Ltd, Amsterdam, The Nertherlands, pp. 253-257. ISSN 9780080451572

Moorman, John Everard (2005) A method for the probabilistic method assessment of structures containing defects. PhD thesis, University of Greenwich.

Moradi, Raya, Arshad, Kamran and Rostami, Soheil (2013) DOFDM for carrier aggregation in LTE-Advanced. In: Second Joint International Workshop on Applied Radio Systems Research and Smart Wireless Communications (ARSR/SWICOM 2013), 21-22 May 2015, Luton, UK. (Unpublished)

Morato, M., Chen, Yifan, Yuen, Chau and Lei, Zhongding (2011) Decentralized block diagonalization algorithms for distributed MIMO systems. In: International Symposium on Wireless and Pervasive Computing, ISWPC 2011. IEEE Computer Society, Piscataway, USA, pp. 1-5. ISBN 9781424498680 (Print), 9781424498673 (Online) (doi:10.1109/ISWPC.2011.5751334)

Moreira, C.L., Rua, David, Karfopoulos, E., Zountouridou, E., Soares, F.J., Bourithi, I., Grau, I., Peças Lopes, J.A., Cipcigan, L.M., Seca, Luis, Moschakis, Marios, Rocha Almeida, P.M., Moutis, P., Papadopoulos, P., Rei, R.J., Bessa, Ricardo J. and Skarvelis-Kazakos, S. (2010) Extend concepts of MG by identifying several EV smart control approaches to be embedded in the Smart Grid concept to manage EV individually or in clusters. Project Report. MERGE.

Motamed, J. and Alani, A.M. (2011) Proposal for the retrofit of the world heritage site of Arge Bam after earthquake damage. In: Concrete Solutions 2011. CRC Press/Balkema / Taylor & Francis Group, London, UK, pp. 95-100. ISBN 978-0-415-61622-5 (hbk), 9780203134689 (ebk)

Motamed, Jubin (2005) The Bam earthquake of 26 December 2003, Iran. Other. Institution of Structural Engineers / Earthquake Engineering Field Investigation Team (EEFIT) [website], London, UK.

Motamed, Jubin and Al-Hussaini, Abbas (2009) Influence of central vertical bar on the behaviour of high strength concrete transfer beam-column joints. In: Tasnimi, Abbas Ali, (ed.) The Third International Conference on Concrete and Development. Building and Housing Research Center, Tehran, Iran, pp. 485-496. (doi:CD02-026)

Motamed, Jubin, Al-Hussaini, Abbas and Alani, Amir Morteza (2012) Shear design of HSC beams with combination of links and horizontal web steel. Magazine of Concrete Research, 64 (9). pp. 781-791. ISSN 0024-9831 (Print), 1751-763X (Online) (doi:10.1680/macr.11.00047)

Mountney, S.L., Gao, James and Wiseall, S. (2007) A knowledge system to support manufacturing knowledge during preliminary design. International Journal of Production Research, 45 (7). pp. 1521-1537. ISSN 0020-7543 (doi:10.1080/00207540600942300)

Mountney, Sara, Roy, Rajkumar and Gao, James (2011) Acquiring innovative manufacturing engineering knowledge for the preliminary design of complex mechanical components. In: Bernard, Alain, (ed.) Global Product Development. Springer, Berlin / Heidelberg, pp. 457-464. ISBN 978-3-642-15973-2 (doi:10.1007/978-3-642-15973-2_46)

Murnane, S.N., Barnes, R.N., Woodhead, Steve and Amadi-Echendu, J.E. (1996) Electrostatic modelling and measurement of airborne particle concentration. IEEE Transactions on Instrumentation and Measurement, 45 (2). pp. 488-492. ISSN 0018-9456

Murnane, S.N., Barnes, R.N., Woodhead, Steve and Amadi-Echendu, J.E. (1995) Electrostatic modelling and measurement of airborne particles concentration. 1995 IEEE Instrumentation and Measurement Technology. Institute of Electrical and Electronics Engineers, New York, pp. 762-765. ISBN 978-0780326156 (doi:10.1109/IMTC.1995.515418)

Mwinkuka, T., Hinduja, S. and Owodunni, Oladele (2007) Extendible operation sequencing for turn-milled components. CIRP Annals - Manufacturing Technology, 56 (1). pp. 473-478. ISSN 0007-8506 (doi:10.10.1016/j.cirp.2007.05.113)

Naayagi, R.T., Forsyth, A.J. and Shuttleworth, R. (2011) Performance analysis of DAB DC-DC converter under zero voltage switching. In: Proceedings of the 2011 1st International Conference on Electrical Energy Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineering, Inc., Piscataway, NJ, USA, pp. 56-61. ISBN 9781612843780 (doi:10.1109/ICEES.2011.5725302)

Naayagi, R.T., Shuttleworth, R. and Forsyth, A.J. (2011) Investigating the effect of snubber capacitor on high power IGBT turn-off. In: Proceedings of the 2011 1st International Conference on Electrical Energy Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineering, Inc., Piscataway, NJ, USA, pp. 50-55. ISBN 9781612843780 (doi:10.1109/ICEES.2011.5725301)

Nadjai, Ali, Goodfellow, Nathan, Tee, Kong, Ali, Faris and Choi, Sengkwan (2010) Analysis of composite floor cellular steel beams in fire. Journal of Structural Fire Engineering, 1 (3). pp. 161-175. ISSN 2040-2317 (doi:10.1260/2040-2317.1.3.161)

Nguyen, Van Tuong, Pokorny, P. and Le, Chi (2010) Free-form surface partitioning for 5-axis CNC milling based on surface curvature and Chain Codes. In: Innovative Production Machines and Systems: Fifth I PROMS Virtual International Conference. Whittles Publishing. ISBN 1849950067 ISSN 9781849950060

Nijsure, Y., Chen, Y., Rapajic, P., Yuen, C., Chew, Y.H. and Qin, T.F. (2010) Information-theoretic algorithm for waveform optimization within ultra wideband cognitive radar network. In: International Conference on Ultra-Wideband (ICUWB). IEEE International Conference on Ultra-Wideband (ICUWB) . IEEE Xplore Digital Library, Nanjing, pp. 1-4. ISBN 978-1-4244-5305-4 (print) ISSN 978-1-4244-5306-1 (online) (doi:10.1109/ICUWB.2010.5616308)

Nijsure, Y., Chen, Yifan, Litchfield, C. and Rapajic, P.B. (2009) Hidden Markov model for target tracking with UWB radar systems. In: Personal, Indoor and Mobile Radio Communications. Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ, USA, pp. 2065-2069. ISBN 978-1-4244-5123-4 (online), 978-1-4244-5122-7 (print) (doi:10.1109/PIMRC.2009.5450337)

Nijsure, Y., Litchfield, C., Chen, Yifan and Rapajic, P.B. (2009) Vector precoding scheme for multi-user MIMO systems. In: Vehicular Technology Conference Fall (VTC 2009-Fall). Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ, USA, pp. 1-5. ISBN 978-1-4244-2514-3 (print), 978-1-4244-2515-0 (electronic) ISSN 1090-3038 (doi:10.1109/VETECF.2009.5378987)

Ogunlade, O., Chen, Yifan and Kosmas, P. (2010) Measurement of the complex permittivity of microbubbles using a cavity perturbation technique for contrast enhanced ultra-wideband breast cancer detection. In: 2010 Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC'10. IEEE Computer Society, Piscataway, USA, pp. 6733-6736. ISBN 978424441235 (doi:0.1109/IEMBS.2010.5626016)

Ogunlade, Olumide (2011) A mode matching analysis of rectangular dielectric discontinuities in metal waveguides applicable to characterisation of liquids. In: IET 8th International Conference on Computation in Electromagnetics (CEM 2011) (CP577). IET Conference Publications, 2011 (CP577). The Institution of Engineering and Technology, pp. 28-29. ISBN ISBN: 978-1-84919-468-6 (doi:10.1049/cp.2011.0022)

Okereke, M. I. and Akpoyomare, A. I. (2013) A virtual framework for prediction of full-field elastic response of unidirectional composites. Computational Materials Science, 70. pp. 82-99. ISSN 0927-0256 (Online) (doi:10.1016/j.commatsci.2012.12.036)

Okereke, M.I., Akpoyomare, A.I. and Bingley, M.S. (2014) Virtual testing of advanced composites, cellular materials and biomaterials: A review. Composites Part B: Engineering, 60. 637 - 662. ISSN 1359-8368 (doi:10.1016/j.compositesb.2014.01.007)

Okereke, M.I., Buckley, C.P. and Siviour, C.R. (2012) Compression of polypropylene across a wide range of strain rates. Mechanics of Time-Dependent Materials, 16 (4). pp. 361-379. ISSN 1385-2000 (Print), 1573-2738 (Online) (doi:10.1007/s11043-012-9167-z)

Okereke, Michael, Buckleyb, C.P and Le, Chi (2010) Micromechanical modelling of finite deformation of thermoplastic matrix composites. In: Solid Mechanics and Materials Engineering Group seminar, 14 June 2010, Oxford, UK.

Okereke, Michael, Le, Chi and Buckley, C.P (2012) A new constitutive model for prediction of impact rates response of polypropylene. EPJ Web of Conferences, 26:04031. ISSN 2100-014X (doi:10.1051/epjconf/20122604031)

Oletu, G. and Rapajic, P. (2011) The performance of turbo codes for wireless communication systems. In: ICCRD2011 - 2011 3rd International Conference on Computer Research and Development. IEEE Computer Society, Piscataway, USA, pp. 346-349. ISBN 9781612848396 (doi:10.1109/ICCRD.2011.5763919)

Oletu, G., Rapajic, P., Eneh, T. and Anang, K. (2012) Enhanced equalization for mobile communication systems. In: Computer Modeling and Simulation (EMS). The Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 446-450. ISBN 978-1-4673-0060-5 (doi:10.1109/EMS.2011.32)

Oletu, G., Rapajic, P., Eneh, T. and Anang, K. (2011) Performance of iterative decoding with imperfect MMSE DFE. Wireless Days. pp. 1-3. ISSN 2156-9711 (doi:10.1109/WD.2011.6098137)

Oletu, Grace, Rapajic, Predrag, Anang, Kwashie, Wu, Ruiheng and Eneh, Titus (2012) The smearing filter design techniques for data transmission. In: 2012 IEEE Vehicular Technology Conference (VTC Fall) Proceedings. IEEE Conference Publications . Institution of Electrical and Electonic Engineers, Inc., Piscataway, NJ, USA. ISBN 978-1-4673-1881-5 ISSN 1090-3038 (doi:10.1109/VTCFall.2012.6398948)

Oletu, Grace Ogheneruonano (2013) Turbo coding and equalization for wireless communication systems. PhD thesis, University of Greenwich.

Ostovari Dailamani, Shadi (2014) Non-parametric size optimization of concrete shell structures using evolutionary algorithms. In: IASS-SLTE 2014 Symposium, 15-19 Sep 2014, Brasilia, Brazil. (Unpublished)

Ostovari-Dailamani, Shadi and Croll, James G. A. (2008) Behaviour of cylindrical and doubly-curved shell roofs under earthquake. In: Abel, John F. and Cooke, J. Robert, (eds.) Proceedings of the 6th International Conference on Computation of Shell and Spatial Structures. Cornell University, Cornell, USA.

Ostovari-Dailamani, Shadi and Croll, James G. A. (2009) Effect of pre-loading on response of cylindrical roof shells under earthquake loading. In: 9th Asia Pacific Conference on Shell and Spatial Structures (APCS) 2009, 27-29 May 2009, Nagoya Congress Center, Nagoya, Japan. (Submitted)

Otiaba, K.C., Bhatti, R.S., Ekere, N.N., Ekpu, M. and Adeyemi, J. (2011) Comparative study of the effects of coalesced and distributed solder die attach voids on thermal resistance of packaged semiconductor device. In: Collection of Papers Presented at the 17th International Workshop on THERMal INvestigation of ICs and Systems (THERMINIC' 2011). EDA Publishing Association, Grenoble, France, pp. 115-119. ISBN 9782355000188

Otiaba, K.C., Bhatti, R.S., Ekere, N.N., Mallik, S., Amalu, E.H. and Ekpu, M. (2011) Thermal effects of die-attach voids location and style on performance of chip level package. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 231-236. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145176)

Otiaba, K.C., Ekere, N.N., Amalu, E.H., Bhatti, R.S. and Mallik, S. (2012) Thermal management materials for electronic control unit: trends, processing technology and R and D challenges. Advanced Materials Research, 367. pp. 301-307. ISSN 1022-6680 (Print), 1662-8985 (Online) (doi:10.4028/www.scientific.net/AMR.367.301)

Otiaba, K.C., Ekere, N.N., Amalu, E.H., Bhatti, R.S. and Mallik, S. (2010) Thermal management materials for electronic control unit: trends, processing technology and R&D challenges. In: International Conference on Engineering Research & Development: Advances in Engineering Science & Technology, 7-9 September 2010, Benin City, Africa.

Otiaba, K.C., Ekere, N.N., Bhatti, R.S., Mallik, S., Alam, M.O. and Amalu, E.H. (2011) Thermal interface materials for automotive electronic control unit: Trends, technology and R&D challenges. Microelectronics Reliability, 51 (12). pp. 2031-2043. ISSN 0026-2714 (doi:10.1016/j.microrel.2011.05.001)

Otiaba, K.C., Ekere, N.N., Bhatti, R.S., Mallik, S. and Amalu, E.H. (2011) Emerging nanotechnology-based thermal interface materials for automotive electronic control unit application. In: Microelectronics and Packaging. Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ, USA, pp. 1-8. ISBN 978-1-4673-0694-2 (print)

Otiaba, Kenny C. (2013) Thermal and thermo-mechanical performance of voided lead-free solder thermal interface materials for chip-scale packaged power device. PhD thesis, University of Greenwich.

Otiaba, Kenny C., Bhatti, R.S., Ekere, N.N., Mallik, S., Alam, M.O., Amalu, E.H. and Ekpu, M. (2012) Numerical study on thermal impacts of different void patterns on performance of chip-scale packaged power device. Microelectronics Reliability, 52 (7). pp. 1409-1419. ISSN 0026-2714 (doi:10.1016/j.microrel.2012.01.015)

Otiaba, Kenny C., Bhatti, R.S., Ekere, N.N., Mallik, S. and Ekpu, M. (2012) Finite element analysis of the effect of silver content for Sn–Ag–Cu alloy compositions on thermal cycling reliability of solder die attach. Engineering Failure Analysis, 28. pp. 192-207. ISSN 1350-6307 (doi:10.1016/j.engfailanal.2012.10.008)

Otiaba, Kenny C., Okereke, M.I. and Bhatti, R.S. (2013) Numerical assessment of the effect of void morphology on thermo-mechanical performance of solder thermal interface material. Applied Thermal Engineering, 64 (1–2). 51 - 63. ISSN 1359-4311 (doi:10.1016/j.applthermaleng.2013.12.006)

Owodunni, O.O., Zhang, T. and Gao, J. (2013) Energy consideration in machining operations - towards explanatory models for optimisation results. In: 11th Global Conference on Sustainable Manufacturing : Proceedings. Innovative Solutions. Universitätsverlag der TU Berlin, Berlin, Germany, pp. 153-158. ISBN 978-3-7983-2609-5

Owodunni, Oladele, Hinduja, Srichand, Mekid, Samir and Zia, Ahmad (2007) An investigation of optimum cutting conditions for STEP-NC turned features. In: Innovative Production Machines and Systems Conference 2007 (IPROMS), 2-13 July 2007, http://conference.iproms.org/ [Virtual Conference].

Owonikoko, A., Berry, R.J. and Bradley, M.S.A. (2010) Characterisation of extreme shape materials: “biomass and waste materials”. In: Bulk Solids Europe 2010 Conference and IMechE Symposium in New Frontiers in Bulk Materials Handling, 9-10 September 2010, Glasgow. (Submitted)

Owonikoko, Aminu (2012) Predicting storage vessel geometry requirements for discharge of extreme shape materials. MPhil thesis, University of Greenwich.

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Awad, B., Cipcigan, L.M. and Jenkins, N. (2010) Impact of residential charging of electric vehicles on distribution networks, a probabilistic approach. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2012) Electric vehicles' impact on British distribution networks. IET Electrical Systems in Transportation, 2 (3). pp. 91-102. ISSN 2042-9738 (doi:10.1049/iet-est.2011.0023)

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2011) Predicting Electric Vehicle impacts on residential distribution networks with distributed generation. In: 2010 IEEE Vehicle Power and Propulsion Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-8220-7 (doi:10.1109/VPPC.2010.5729009)

Paradise, Jessica, Trewin, Shari and Keates, Simeon (2005) Using pointing devices: difficulties encountered and strategies employed. In: 3rd International Conference on Universal Access in Human-Computer Interaction, 22-27 July 2005, Las Vegas, Nevada, USA.

Park, H. S., Anh, D. B. H. and Hieu, L. C. (2010) Computer based generation of control programs for a high speed mobile harbor crane in a novel maritime container handling system. In: 6th I*PROMS Virtual International Conference on Intelligent Production Machines and Systems. Whittles Publishing, Caithness, Scotland. ISBN 9780080451572

Parneet, Paul and Tota-Maharaj, Kiran (2015) Laboratory studies on granular filters and their relationship to geotextiles for stormwater pollutant reduction. Water, 7 (4). pp. 1595-1609. ISSN 2073-4441 (doi:10.3390/w7041595)

Perricos, C., Keates, S. and Morris, C. (1996) Jester - A Gesture Recognition System for Windows 95. [Working Paper]

Phan, Anh D., Viet, N.A., Poklonski, Nikolai A., Woods, Lilia M. and Le, Chi H. (2012) Interaction of a graphene sheet with a ferromagnetic metal plate. Physical Review B (PRB), 86:155419. ISSN 1098-0121 (Print), 1550-235X (Online) (doi:10.1103/PhysRevB.86.155419)

Pillai, John (2009) Direct on-line measurement of wall friction of coal as an indicator of handleability. PhD thesis, University of Greenwich.

Pillai, Sreejit (2015) A decision support system for ERP projects in make -to-order manufacturing SMEs. PhD thesis, University of Greenwich.

Pillai, Sreejit, Arokiam, Alan, Bhatti, Raj and Collins, T. (2011) Make to order manufacturing and operational management strategies – a case study at Priorclave Ltd. In: 18th International Annual EurOMA Conference: Exploring Interfaces, 3-6 Jul 2011, Cambridge, UK. (Unpublished)

Pillai, Sreejit, Arokiam, Alan and Bhatti, Rajinderpal (2013) Linking simulation, critical success factors and enterprise resource planning in small and medium size enterprises. International Journal of Information Systems and Change Management, 6 (3). pp. 266-290. ISSN 1479-3121 (Print), 1479-313X (Online) (doi:10.1504/IJISCM.2013.058337)

Piorkowski, B.A., Evans, R.D. and Gao, J.X. (2011) Development of a face-to-face meeting capture and indexing process. In: Proceedings of the 2011 15th International Conference on Computer Supported Cooperative Work in Design, CSCWD2011. IEEE Computer Society, Piscataway, NJ, USA, pp. 4-8. ISBN 9781457703867 (doi:10.1109/CSCWD.2011.5960047)

Piorkowski, Barry, Gao, James and Evans, Richard (2011) A case-study: finding references to product development knowledge from analysis of face-to-face meetings. In: Glocalized Solutions for Sustainability in Manufacturing Proceedings of the 18th CIRP International Conference on Life Cycle Engineering. Springer, New York, USA, pp. 564-569. ISBN 978-3642196911 (doi:10.1007/978-3-642-19692-8-98)

Piorkowski, Barry Andrew, Gao, James Xiaoyu, Evans, Richard David and Martin, Nick (2012) A dynamic knowledge management framework for the high value manufacturing industry. International Journal of Production Research, 51 (7). pp. 2176-2185. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:10.1080/00207543.2012.709650)

Pittman, Andrew Nigel (1990) Suction nozzle feeding mechanisms and their effect on the performance of vacuum pneumatic conveying systems. MPhil thesis, Thames Polytechnic.

Prest, M.J., Wang, Y., Huang, F. and Lancaster, M.J. (2008) Silicon comb-drive actuators for low-temperature tuning of superconducting microwave circuits. Journal of Micromechanics and Microengineering, 18 (12):125003. ISSN 0960-1317 (Print), 1361-6439 (Online) (doi:10.1088/0960-1317/18/12/125003)

Quinn, Ruth (2015) Evaluation of flow models and pollutant retention isotherms for their application to rain garden bioretention. PhD thesis, University of Greenwich.

Quinn, Ruth and Dussaillant, Alejandro (2014) Modeling heavy metal behaviour in sustainable drainage systems: a case study. CLEAN – Soil, Air, Water, 42 (2). pp. 160-168. ISSN 1863-0650 (Print), 1863-0669 (Online) (doi:10.1002/clen.201300163)

Qureshi, A., Kanakis, T., Litchfield, C. and Rapajic, P. (2010) Adaptive MMSE multiuser detection (A-MMSE-MUD) in asynchronous cooperative CDMA networks. In: SoftCOM 2010 - International Conference on Software, Telecommunications and Computer Networks. IEEE Computer Society, Piscataway, USA, 260 -264. ISBN 9781424486632 (Print), 9789532900040 (Online)

Qureshi, Athar (2011) Adaptive signal combining and detection in cooperative wireless networks. PhD thesis, University of Greenwich.

Qureshi, Athar, Balasubramanyam, Ramkumar and Rapajic, Predrag (2010) Combining signals by weighted least square error method for wireless communication networks. International Journal of Simulation: Systems, Science and Technology, 11 (6). pp. 8-13. ISSN 1473-8031 (Print), 1473-804X (Online)

Qureshi, Athar, Kanakis, Triantafyllos and Rapajic, Pedrag (2010) Adaptive signal combining with unequal channel noise variances. International Journal of Simulation: Systems, Science and Technology, 11 (6). pp. 14-21. ISSN 1473-8031 (Print), 1473-804X (Online)

Qureshi, Athar, Kanakis, Triantafyllos and Rapajic, Predrag (2010) Adaptive combining of signals with unequal noise variances. In: 2nd International Conference on Computational Intelligence, Modelling and Simulation (CIMSiM). IEEE Computer Society, Conference Publishing Services, Washington, USA, pp. 488-493. ISBN 978-1-4244-8652-6 (Print), 978-0-7695-4262-1 (Online) (doi:10.1109/CIMSiM.2010.21)

Qureshi, Athar, Kanakis, Triantafyllos and Rapajic, Predrag (2011) Interference resistance of adaptive multiuser detection in asynchronous detect and forward relaying CDMA networks. 2011 Baltic Congress on Future Internet Communications (BCFIC Riga 2011). IEEE Explore, Piscataway, NJ, USA, pp. 90-95. ISBN 9781424485116 (doi:10.1109/BCFIC-RIGA.2011.5733225)

Raab, A. F., Ferdowsi, M., Karfopoulos, E., Unda, I. Grau, Skarvelis-Kazakos, S., Papadopoulos, P., Abbasi, E., Cipcigan, L.M., Jenkins, N., Hatziargyriou, N. and Strunz, K. (2011) Virtual power plant control concepts with electric vehicles. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082214)

Rajasekaran, Uvaraj, Arshad, Kamran and Moessner, Klaus (2010) Joint rate and power control using distributed algorithms in cognitie radio networks. In: Proceedings of the SDR ’10 Technical Conference and Product Exposition. Wireless Innovation Forum.

Rapajic, Predrag, Kabir, Ahsaul, Huang, Kao-Cheng and Wu, Ruiheng (2007) Next generation identity card: RFID-based automatic access control system for universities. In: Kartalopoulos, Stamatios, Demiralp, Metin, Mastorakis, Nikos, Soni, Ritu and Nassar, Hamed, (eds.) Selected Topics on Circuits, Systems, Electronics, Control & Signal Processing: Proceedings of the 6th WSEAS International Conference on Circuits, Systems, Electronics, Control & Signal Processing. Electrical and Computer Engineering . WSEAS Press, Singapore, pp. 480-483. ISBN 9789606766282

Rapajic, Predrag and Kanakis, Triantafyllos (2008) MIMO relay channels with partial channel knowledge/estimation error and spatial correlation. In: Wysocki, Beata J. and Wysocki, Tadeusz A., (eds.) Proceedings of the 1st International Conference on Signal Processing and Telecommunication Systems ICSPCS'2007 Australia, Gold Coast December 17-19, 2007. DSP for Communication Systems, Tarrawanna, New South Wales, Australia, pp. 43-47. ISBN 9780975693445

Rapajic, Predrag, Kennedy, Rodney A. and Krusevac, Snezana M. (2007) Effect of signal and noise mutual coupling on MIMO channel capacity. Wireless Personal Communications, 40 (3). pp. 317-328. ISSN 0929-6212 (doi:10.1007/s11277-006-9193-8)

Rapajic, Predrag and Krusevac, Zarko B. (2008) Equivalent channel for capacity analysis of differential detection over time-varying communication channels. In: Wysocki, Beata J. and Wysocki, Tadeusz A., (eds.) Proceedings of the 1st International Conference on Signal Processing and Telecommunication Systems ICSPCS'2007 Australia, Gold Coast December 17-19, 2007. DSP for Communication Systems, Tarrawanna, New South Wales, Australia, pp. 21-26. ISBN 9780975693445

Rapajic, Predrag, Liu, Yang, Kennedy, Rodney A. and Sadeghi, Parastoo (2008) Pilot symbol transmission for time-varying fading channels: an information-theoretic optimization. In: Wysocki, Beata J. and Wysocki, Tadeusz A., (eds.) Proceedings of the 1st International Conference on Signal Processing and Telecommunication Systems ICSPCS'2007 Australia, Gold Coast December 17-19, 2007. DSP for Communication Systems, Tarrawanna, New South Wales, Australia, pp. 34-42. ISBN 9780975693445

Reynolds, Matthew C. (1990) A three dimensional vision system for industrial surface topography measurement. PhD thesis, Thames Polytechnic.

Rezania, Mohammad, Faramarzi, Asaad and Javadi, Akbar A. (2011) An evolutionary based approach for assessment of earthquake-induced soil liquefaction and lateral displacement. Engineering Applications of Artificial Intelligence, 24 (1). pp. 142-153. ISSN 0952-1976 (doi:10.1016/j.engappai.2010.09.010)

Rizzuto, J.P. (2008) Dodecahedric mutually supported element space structure: Numerical modelling. Journal of the International Association for Shell and Spatial Structures, 49 (157). pp. 3-18. ISSN 1028-365X (Print), 1996-9015 (Online)

Rizzuto, J.P. (2014) Eccentricity orientation of bolted connections in space structure configurations using reciprocally supported elements. Journal of the International Association for Shell and Spatial Structures, 55 (1). pp. 49-62. ISSN 1028-365X (Print), 1996-9015 (Online)

Rizzuto, J.P. and Hulse, R. (2007) Dodecahedric mutually supported element space structure: Experimental investigation. International Journal of Space Structures, 22 (2). pp. 107-121. ISSN 0266-3511 (doi:10.1260/026635107781482640)

Rizzuto, J.P. and Larsen, O. Popovic (2010) Connection systems in reciprocal frames and mutually supported elements space structure networks. International Journal of Space Structures, 25 (4). pp. 243-256. ISSN 0266-3511 (doi:10.1260/0266-3511.25.4.243)

Rizzuto, J.P., Saidani, M. and Chilton, J.C. (2001) Polyhedric space structures using reciprocally supported elements of various cross-sections. Journal of the International Association for Shell and Spatial Structures, 42 (137). pp. 149-159. ISSN 1028-365X (Print), 1996-9015 (Online)

Rizzuto, J.P., Saidani, M. and Chilton, J.C. (2000) The self-supporting multi-reciprocal grid (MRG) system using notched elements. Journal of the International Association for Shell and Spatial Structures, 41 (133). pp. 125-131. ISSN 1028-365X (Print), 1996-9015 (Online)

Robinson, J.P., Kingman, S.W., Snape, C.E., Barranco, R., Shang, H., Bradley, M.S.A. and Bradshaw, S.M. (2009) Remediation of oil-contaminated drill cuttings using continuous microwave heating. Chemical Engineering Journal, 152 (2-3). pp. 458-463. ISSN 1385-8947 (doi:10.1016/j.cej.2009.05.008)

Robinson, J.P., Kingman, S.W., Snape, C.E., Bradshaw, S.M., Bradley, M.S.A., Shang, H. and Barranco, R. (2009) Scale-up and design of a continuous microwave treatment system for the processing of oil-contaminated drill cuttings. Chemical Engineering Research and Design, 88 (2). pp. 146-154. ISSN 0263-8762 (doi:10.1016/j.cherd.2009.07.011)

Robinson, John, Kingman, Sam, Snape, Colin E., Bradley, Mike, Bradshaw, Steven, Thomas, Dominic J.M. and Page, Paul W. (2009) Microwave treatment of oil-contaminated drill cuttings at pilot scale. SPE Drilling and Completion, 24 (3). pp. 430-435. ISSN 1064-6671 (Print), 1930-0204 (Online) (doi:10.2118/111637-PA)

Romanova, Anna, Faramarzi, Asaad, Mahmoodian, Mojtaba and Alani, M. Amir (2014) An Evolutionary Polynomial Regression (EPR) model for prediction of H2S induced corrosion in concrete sewer pipes. In: 11th International Conference on Hydroinformatics (HIC 2014), 17-21 Aug 2014, New York City, USA.

Romanova, Anna, Mahmoodian, Mojtaba and Alani, Morteza (2014) Influence and interaction of temperature, H2S and pH on concrete sewer pipe corrosion. In: ICCEIE 2014: International Conference on Civil, Environmental and Infrastructure Engineering, 12-13 Jun 2014, Copenhagen, Denmark. (Unpublished)

Romanova, Anna, Mahmoodian, Mojtaba and Alani, Morteza A. (2014) Influence and interaction of temperature, H2S and pH on concrete sewer pipe corrosion. International Journal of Civil, Architectural, Structural, Urban Science and Engineering, 8 (6). pp. 592-595. ISSN 1307-6892

Rostami, Soheil, Arshad, Kamran and Moessner, Klaus (2012) Order-statistic based spectrum sensing for cognitive radio. IEEE Communications Letters, 15 (5). pp. 592-595. ISSN 1089-7798 (doi:10.1109/LCOMM.2012.030512.111887)

Sadeghi, Parastoo, Kennedy, Rodney A., Rapajic, Pedrag B. and Shams, Ramtin (2008) Finite-state Markov modeling of fading channels: a survey of principles and applications. IEEE Signal Processing Magazine, 25 (5). pp. 57-80. ISSN 1053-5888 (doi:10.1109/MSP.2008.926683)

Sadeghi, Parastoo and Rapajic, Predrag (2008) On information rates of time-varying fading channels modeled as finite-state Markov channels. IEEE Transactions on Communications, 56 (8). pp. 1268-1278. ISSN 0090-6778 (doi:10.1109/TCOMM.2008.060622)

Sagor, Md Hasanuzzaman and Callaghan, Peter (2014) Benefits of active transmit balanced antenna fed by differential power amplifier. In: 2014 Loughborough Antennas and Propagation Conference (LAPC). Institute of Electrical and Electronics Engineers Inc., Piscataway, NJ, USA, pp. 732-735. ISBN 9781479936625 (doi:10.1109/LAPC.2014.6996499)

Sagor, Md. Hasanuzzaman (2014) Differentially fed active antennas. PhD thesis, University of Greenwich.

Sahatoo, Divesh, Chowdary, Boppana V., Ali, Fahraz F. and Bhatti, Rajinderpal (2008) Slicing issues in CAD translation to STL in rapid prototyping. Proceedings of The 2008 IAJC-IJME International Conference. International Association of Journals and Conferences/International Journal of Modern Engineering, California State University, Northridge. ISBN 9781606433799

Salam, B. and Ekere, Ndy (2006) A study of inter-metallic compounds (IMC) formation and growth in ultra-fine pitch Sn-Ag-Cu lead-free solder joints. ESTC 2006: 1st Electronics Systemintegration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, pp. 988-994. ISBN 1424405521 (doi:10.1109/ESTC.2006.280131)

Salter, G.F., Farnish, R.J., Bradley, M.S.A. and Burnett, A.J. (2000) Segregation of binary mixtures of particles during the filling of a two-dimensional representation of a hopper. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 214 (3). pp. 197-208. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/0954408001530056)

Sangelaji, Z. and Banks, S.P. (2009) Radial control design for a class of nonlinear systems. Control and Intelligent Systems, 37 (3). pp. 144-151. ISSN 1480-1752 (Print), 1925-5810 (Online) (doi:10.2316/Journal.201.2009.3.201-2018)

Santana Perdomo, Jose Carmelo (2015) Development of a test protocol for industry to predict and optimise flow behaviour of blended powders utilising particle to bulk scale models. PhD thesis, University of Greenwich.

Saunders, Tim, Gao, James and Shah, Satya (2014) A case study to evaluate lean product development practices in the global automotive industry. International Journal of Product Development, 19 (5/6). pp. 307-327. ISSN 1477-9056 (Print), 1741-8178 (Online) (doi:10.1504/IJPD.2014.064882)

Saur-Amaral, Irina and Kofinas, Alexander (2010) Multidisciplinary collaborations in pharmaceutical innovation: a two case-study comparison. Journal of Business Chemistry, 7 (3). pp. 131-154. ISSN 1613-9615

Schuster, T., Bradley, M.S.A. and Reed, Alan R. (1995) The dependence of power consumption of pneumatic conveying systems upon bulk material properties, pipeline bore and routing, and mode of flow. Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering, 209 (E1). pp. 69-75. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/PIME_PROC_1995_209_230_02)

Seman, Anton (2010) On-line non-destructive ultrasonic rheology measurement of solder pastes. PhD thesis, University of Greenwich.

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) Development of an in-situ, non-destructive ultrasonic monitoring technique for solder pastes. 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 209-214. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684351)

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) In-situ non-destructive ultrasonic rheology technique for monitoring different lead-free solder pastes for surface mount applications. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1448-1454. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763635)

Senff, L., Hotza, D., Lucas, S., Ferreira, V.M. and Labrincha, J.A. (2011) Effect of nano-SiO2 and nano-TiO2 addition on the rheological behavior and the hardened properties of cement mortars. Materials Science and Engineering: A, 532. pp. 354-361. ISSN 0921-5093 (doi:10.1016/j.msea.2011.10.102)

Senff, L., Tobaldi, D.M., Lucas, S., Hotza, D., Ferreira, V.M. and Labrincha, J.A. (2012) Formulation of mortars with nano-SiO2 and nano-TiO2 for degradation of pollutants in buildings. Composites Part B: Engineering, 44 (1). pp. 40-47. ISSN 1359-8368 (doi:10.1016/j.compositesb.2012.07.022)

Shahzad, Khurram and Woodhead, Steve (2014) A Pseudo-Worm Daemon (PWD) for empirical analysis of zero-day network worms and countermeasure testing. In: Fifth International Conference on Computing, Communications and Networking Technologies (ICCCNT). Institute of Electrical and Electronics Engineers (IEEE), Piscataway, NJ, USA, pp. 1-6. ISBN 9781479926954 (doi:10.1109/ICCCNT.2014.6963124)

Shahzad, Khurram and Woodhead, Steve (2014) Towards automated distributed containment of zero-day network worms. In: Fifth International Conference on Computing, Communications and Networking Technologies (ICCCNT). IEEE, pp. 1-7. ISBN 978-1-4799-2695-4 (doi:10.1109/ICCCNT.2014.6963119)

Shahzad, Khurram, Woodhead, Steve and Bakalis, Panos (2013) A virtualised network testbed for zero-day worm analysis and countermeasure testing. In: Advances in Security of Information and Communication Networks: First International Conference, SecNet 2013, Cairo, Egypt, September 3-5, 2013. Proceedings. Communications in Computer and Information Science (381). Springer Berlin Heidelberg, Berlin Heidelberg, Germany, pp. 54-64. ISBN 9783642405976 ISSN 1865-0929 (Print), 1865-0937 (Online) (doi:10.1007/978-3-642-40597-6_5)

Shang, X., Ke, M.L., Wang, Y. and Lancaster, M.J. (2011) Micromachined WR-3 waveguide filter with embedded bends. Electronics Letters, 47 (9). pp. 545-547. ISSN 0013-5194 (Print), 1350-911X (Online) (doi:10.1049/el.2011.0525)

Shang, X., Wang, Y., Nicholson, G.L. and Lancaster, M.J. (2012) Design of multiple-passband filters using coupling matrix optimisation. IET Microwaves, Antennas & Propagation, 6 (1). pp. 24-30. ISSN 1751-8725 (Print), 1751-8733 (Online) (doi:10.1049/iet-map.2011.0261)

Shang, Xiaobang, Wang, Yi and Lancaster, Michael J. (2011) Coupling matrix synthesis of triple-passband filters using optimisation. In: 2nd Annual Passive RF and Microwave Components Seminar. Proceedings of the 2nd Annual Passive RF and Microwave Components Seminar. IET, Stevenage, Herts, UK, pp. 23-28. ISBN 9781849193221 (doi:10.1049/ic.2011.0197)

Shang, Xiaobang, Wang, Yi, Xia, Wenlin and Lancaster, M.J. (2013) Novel multiplexer topologies based on all-resonator structures. IEEE Transactions on Microwave Theory and Techniques, 61 (11). pp. 3838-3845. ISSN 0018-9480 (doi:10.1109/TMTT.2013.2284496)

Shang, Xiaobang, Xia, Wenlin, Wang, Yi and Lancaster, Michael J. (2012) Design of a novel X-band waveguide diplexer based on cross-coupled resonators. In: 5th International Workshop on Microwave Filters, 1-3 Oct 2012, CNES, Toulouse, France. (Unpublished)

Shao, Jiaqing, Krabicka, Jan and Yan, Yong (2010) Velocity measurement of pneumatically conveyed particles using intrusive electrostatic sensors. IEEE Transactions on Instrumentation and Measurement, 59 (5). pp. 1477-1484. ISSN 0018-9456 (doi:10.1109/TIM.2010.2040960)

Shehu, T. and Bhatti, R.S. (2012) The use of Yam flour (starch) as binder for sand mould production in Nigeria. World Applied Sciences Journal, 16 (6). pp. 858-862. ISSN 1818-495 (doi:wasj/wasj16(6)12/14.pdf)

Shen, J., Wang, Y., Chen, N. and Wu, Y. (2000) Site preference of ternary additions in Ni3Al - Using first-principle interatomic potentials. Progress in Natural Science: Materials International, 10 (6). pp. 457-62. ISSN 1002-0071

Skaik, Talal, Lancaster, Michael, Ke, Maolong and Wang, Yi (2011) A micromachined WR-3 band waveguide diplexer based on coupled resonator structures. In: European Microwave Week 2011 Conference Proceedings. European Microwave Association, Louvain-la-Neuve, Belgium, pp. 770-773. ISBN 9781612842356

Skaik, Talal, Wang, Yi, Ke, Maolong, Qian, Shilong and Lancaster, Michael (2010) A micromachined WR-3 waveguide with embedded bends for direct flange connections. In: Microwave Conference (EuMC), 2010 European. IEEE, pp. 1225-1228. ISBN 9781424472321

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2009) Micro-generation for 2050: emissions performances of micro-generation sources during operation. Pollack Periodica, 4 (2). pp. 89-99. ISSN 1788-1994 (Print), 1788-3911 (Online) (doi:10.1556/Pollack.4.2009.2.9)

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2010) Micro-generation for 2050: life-cycle carbon footprint of micro-generation sources. In: 2009 44th International Universities’ Power Engineering Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-6823-2

Skarvelis-Kazakos, Spyros, Papadopoulos, Panagiotis, Grau, Iñaki, Gerber, Annelies, Cipcigan, Liana M., Jenkins, Nick and Carradore, Loredana (2010) Carbon optimized virtual power plant with electric vehicles. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

Skarvelis-Kazakos, Spyros, Rikos, Evangelos, Kolentini, Efstathia, Cipcigan, Liana M. and Jenkins, Nick (2013) Implementing agent-based emissions trading for controlling Virtual Power Plant emissions. Electric Power Systems Research, 102. ISSN 0378-7796 (doi:10.1016/j.epsr.2013.04.004)

Smith, Darren, Wetherall, Jodie, Woodhead, Stephen and Adekunle, Andrew (2014) A cluster-based approach to consensus based distributed task allocation. In: Proceedings 2014 22nd Euromicro International Conference on Parallel, Distributed, and Network-Based Processing PDP 2014. IEEE Computer Society, Conference Publishing Services (CPS), Los Alamitos, CA, USA, pp. 428-431. ISBN 9781479927289 ISSN 1066-6192 (doi:10.1109/PDP.2014.87)

Sobuh, Mohammad M. D., Kenney, Laurence P. J., Galpin, Adam J., Thies, Sibylle B., McLaughlin, Jane, Kulkarni, Jai and Kyberd, Peter (2014) Visuomotor behaviours when using a myoelectric prosthesis. Journal of NeuroEngineering and Rehabilitation, 11 (1):72. pp. 1-11. ISSN 1743-0003 (Print), 1743-0003 (Online) (doi:10.1186/1743-0003-11-72)

Soe, Shwe Pyi, Eyers, Daniel Roy, Le, Chi Hieu and Romli, Awanis (2013) Additive tooling for tube hydroforming. Key Engineering Materials, 572. pp. 269-272. ISSN 1013-9826 (Print), 1662-9795 (Online) (doi:10.4028/www.scientific.net/KEM.572.269)

Soroka, A.J. and Hieu, L.C. (2011) Design challenges for implementing a customer driven mass-customisation system. In: Proceedings - INDIN 2011: 2011 9th IEEE International Conference on Industrial Informatics. Institute of Electrical and Electronics Engineers Inc, Piscataway, USA, pp. 857-862. ISBN 9781457704338 (Online), 9781457704352 (Print) (doi:10.1109/INDIN.2011.6035005)

Stoyanov, Stoyan, Bailey, Chris, Alam, M.O., Yin, Chunyan, Best, Chris, Tollafield, Peter, Crawford, Rob, Parker, Mike and Scott, Jim (2013) Modelling methodology for thermal analysis of hot solder dip process. Microelectronics Reliability, 53 (8). pp. 1055-1067. ISSN 0026-2714 (doi:10.1016/j.microrel.2013.02.018)

Stoyanov, Stoyan, Bailey, Christopher, Kay, Robert, Durairaj, Rajkumar, Hendriksen, Mike, Desmuilliez, Marc and Ekere, Ndy (2004) Assembly and reliability of isotropic conductive adhesives for fine pitch flip-chip applications. In: TMS 2004 133rd TMS Annual Meeting & Exhibition 2004, 14-18 Mar 2004, Charlotte, North Carolina, USA. (Unpublished)

Sun, Jianyong and Keates, Simeon (2013) Canonical correlation analysis on data with censoring and error information. Neural Networks and Learning Systems, IEEE Transactions on, 24 (12). pp. 1909-1919. ISSN 2162-237X (doi:10.1109/TNNLS.2013.2262949)

Surendran, Seevali and Tota-Maharaj, Kiran (2015) Log logistic distribution to model water demand data. Procedia Engineering, 119. pp. 798-802. ISSN 1877-7058 (doi:10.1016/j.proeng.2015.08.940)

Taha, Mohammad Mahmoud A. and Melis, Wim J.C. (2015) Analogue auto-associative memory using a multi-valued memristive memory cell. In: Proceedings of the 2015 IEEE/ACM International Symposium on Nanoscale Architectures (NANOARCH´15). IEEE, Boston, MA (US), pp. 94-99. ISBN 978-1-4673-7848-2 (doi:10.1109/NANOARCH.2015.7180593)

Takyi, G., Amalu, E.H. and Bernasko, P.K. (2011) Effect of solder joint integrity on the thermal performance of a TEC for a 980nm pump laser module. Soldering and Surface Mount Technology, 23 (2). pp. 115-119. ISSN 0954-0911 (doi:10.1108/09540911111120186)

Takyi, G. and Ekere, N.N. (2010) Investigation of the effect of nitrogen and air atmospheres on solder wettability of plasma-treated HASL finish PCBs. Soldering and Surface Mount Technology, 22 (3). pp. 17-21. ISSN 0954 0911 (doi:10.1108/09540911011054154)

Takyi, G. and Ekere, N.N. (2010) Study of the effects of PCB surface finish on plasma process time for lead-free wave soldering. Soldering & Surface Mount Technology, 22 (2). pp. 37-42. ISSN 0954-0911 (doi:10.1108/09540911011036271)

Tandur, Deepaknath, Duplicy, Jonathan, Arshad, Kamran, Depierre, David, Moessner, Klaus, Lehtomäki, Janne, Briggs, Keith, Gonçalves, Luis and Gameiro, Atílio (2012) Cognitive radio systems evaluation: measurement, modeling, and emulation approach. IEEE Vehicular Technology Magazine, 7 (2). pp. 77-84. ISSN 1556-6072 (doi:10.1109/MVT.2012.2190219)

Tao, Mei and Seals, R.C. (1993) Multicomponent gas-mixture measurements using an array of gas sensors and an artificial neural-network. Journal of Microcomputer Applications, 16 (2). pp. 203-210. (doi:10.1006/jmca.1993.1018)

Tavakoli Dehkordi, Anousheh (2015) Optimisation and algorithms in wireless networks for mission critical applications. PhD thesis, University of Greenwich.

Tavakolikhou, Mehdi (2013) A knowledge sharing framework to support rapid prototyping in collaborative automotive supply chain. PhD thesis, University of Greenwich.

Tee, K.F. and Li, C.Q. (2011) A numerical study of maintenance strategy for concrete structures in marine environment. In: Applications of Statistics and Probability in Civil Engineering - Proceedings of the 11th International Conference on Applications of Statistics and Probability in Civil Engineering. The International Conference on Application of Statistics and Probability in Civil Engineering (ICASP) (11). CRC Press, London, UK, pp. 181-183. ISBN 978-0-415-66986-3 (Hardback), 978-0-203-14479-4 (eBook) (doi:10.1201/b11332-94)

Tee, Kong, Koh, C.G. and Quek, S.T. (2009) Numerical and experimental studies of a substructural identification strategy. Structural Health Monitoring, 8 (5). pp. 397-410. ISSN 1475-9217 (Print), 1741-3168 (Online) (doi:10.1177/1475921709102089)

Tee, Kong, Spadoni, A., Scarpa, F. and Ruzzene, M. (2010) Wave propagation in auxetic tetrachiral honeycombs. Journal of Vibration and Acoustics, 132 (3). 031007-031015. ISSN 0739-3717 (Print), 1528-8927 (Online) (doi:10.1115/1.4000785)

Tee, Kong Fah and Cai, Yuzhi (2012) Statistical structural health monitoring using quantile regression. In: 5th European Conference on Structural Control (EACS), 18-20 Jun 2012, Genoa, Italy.

Tee, Kong Fah, Khan, Lutfor Rahman and Coolen-Maturi, Tahani (2015) Application of receiver operating characteristic curve for pipeline reliability analysis. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, 229 (3). pp. 181-192. ISSN 1748-006X (Print), 1748-0078 (Online) (doi:10.1177/1748006X15571115)

Tee, Kong Fah, Khan, Lutfor Rahman and Li, Hongshuang (2014) Application of subset simulation in reliability estimation of underground pipelines. Reliability Engineering & System Safety, 130. pp. 125-131. ISSN 0951-8320 (doi:10.1016/j.ress.2014.05.006)

Tee, Kong Fah, Spadoni, A., Scarpa, F. and Ruzzene, M. (2008) Vibroacoustics and wave propagation of novel chiral honeycombs. Proceedings of SPIE: Advanced Materials and Structures, 6928,. ISSN 0277-786X (doi:10.1117/12.776075)

Tee, Kong-Fah and Chen, Hua-Peng (2010) Retrieving full stiffness matrix from experimental condensed models. In: 10th International Conference on Recent Advances in Structural Dynamics, 12-14 July, Southampton, UK. (Unpublished)

Tee, Kong-Fah, Christopher, C.J., James, M.N. and Patterson, E.A. (2007) New insights into plasticity-induced crack tip shielding via mathematical modelling and full field photoelasticity. Key Engineering Materials, 345-34. pp. 199-204. ISSN 1013-9826 (doi:10.4028/www.scientific.net/KEM.345-346.199)

Tee, Kong-Fah, Christopher, C.J., James, M.N. and Patterson, E.A. (2007) New insights into plasticity-induced crack tip shielding via mathematical modelling and full field photoelasticity. In: 10th International Conference on the Mechanical Behavior of Materials (ICM), 27-31 May 2007, Busan, Korea. (Unpublished)

Tee, Kong-Fah, Christopher, C.J., James, M.N. and Patterson, E.A. (2007) Towards a new model of crack tip stress fields. International Journal of Fracture, 148 (4). pp. 361-371. ISSN 0376-9429 (doi:10.1007/s10704-008-9209-3)

Teo, Jianqi, Chen, Yifan, Soh, Cheong Boon, Gunawan, E., Low, Kay Soon, Putti, T.C. and Wang, Shih-Chang (2010) Breast lesion classification using ultrawideband early time breast lesion response. IEEE Transactions on Antennas and Propagation, 58 (8). pp. 2604-2613. ISSN 0018 926X (doi:10.1109/TAP.2010.2050423)

Teo, Jianqi, Chen, Yifan, Soh, Cheong Boon, Gunawan, Erry, Low, Kay Soon, Putti, Thomas Choudary and Wang, Shih-Chang (2010) An overview of radar based ultra wideband breast cancer detection algorithms. International Journal of Ultra Wideband Communications and Systems, 1 (4). pp. 273-281. ISSN 1758-728X (Print), 1758-7298 (Online) (doi:10.1504/IJUWBCS.2010.034308)

Than Soe, Muang (2013) Vibration-based finite element model updating and structural damage identification. PhD thesis, University of Greenwich.

Tidy, Luc, Woodhead, Steve and Wetherall, Jodie (2013) A large-scale zero-day worm simulator for cyber-epidemiological analysis. In: International Conference On Advances In Computer Science And Electronics Engineering - CSEE 2013. Institute of Research Engineers and Doctors (IRED), Santa Barbara, CA, USA, pp. 230-234. ISBN 978-981-07-5461-7 (doi:10.3850/978-981-07-5461-7_45)

Tidy, Luc, Woodhead, Steve and Wetherall, Jodie (2013) A large-scale zero-day worm simulator for cyber-epidemiological analysis. International Journal Of Advances In Computer Networks And Its Security, 3 (1). pp. 69-73. ISSN 2250 - 3757

Tidy, Luc Jon, Woodhead, Steve and Wetherall, Jodie (2013) Simulation of zero-day worm epidemiology in the dynamic, heterogeneous Internet. The Journal of Defense Modeling and Simulation: Applications, Methodology, Technology, 12 (2). pp. 123-138. ISSN 1548-5129 (Print), 1557-380X (Online) (doi:10.1177/1548512913507153)

Tota-Maharaj, K. and Cheddie, D. (2015) Implementation and operation of coconut fiber/husks stormwater filters as sustainable drainage systems (SuDS) for rural communities across the Caribbean. In: International Low Impact Development Conference 2015. LID: It Works in All Climates and Soils. American Society of Civil Engineers (ASCE), Reston, VA, USA, pp. 105-114. ISBN 9780784479025 (doi:10.1061/9780784479025.010)

Tota-Maharaj, K., Grabowiecki, P. and Scholz, M. (2009) Energy and temperature performance analysis of geothermal (ground source) heat pumps integrated with permeable pavement systems for urban run-off reuse. International Journal of Sustainable Engineering, 2 (3). pp. 201-213. ISSN 1939-7038 (Print), 1939-7046 (Online) (doi:10.1080/19397030903151296)

Tota-Maharaj, K. and Meeroff, D.E. (2013) Evaluation of solar photosensitised river water treatment in the Caribbean. International Journal of Photoenergy, 2013:487890. pp. 1-10. ISSN 1110-662X (Print), 1687-529X (Online) (doi:10.1155/2013/487890)

Tota-Maharaj, K., Prasad, T.D. and Scholz, M. (2011) Applications of back propagation neural networks in predicting nutrient effluent concentrations from permeable pavements. In: Urban Water Management: Challenges and Opportunities: Proceedings of CCW1 2011. Centre for Water Systems, University of Exeter, Exeter, UK. ISBN 978-0953914081

Tota-Maharaj, K., Ramkissoon, R. and Manohar, K. (2012) Economical Darrieus straight bladed vertical axis wind turbine for renewable energy applications. Journal of the Energy Institute, 85 (3). pp. 156-162. ISSN 1743-9671 (Print), 1746-0220 (Online)

Tota-Maharaj, K. and Scholz, M. (2011) Artificial neural network simulation of combined permeable pavement and earth energy systems treating storm water. Journal of Environmental Engineering, 138 (4). pp. 499-509. ISSN 0733-9372 (Print), 1943-7870 (Online) (doi:10.1061/(ASCE)EE.1943-7870.0000497)

Tota-Maharaj, K., Scholz, M., Ahmed, T., French, C. and Pagaling, E. (2010) The synergy of permeable pavements and geothermal heat pumps for stormwater treatment and reuse. Environmental Technology, 31 (14). pp. 1517-1531. ISSN 0959-3330 (Print), 1479-487X (Online) (doi:10.1080/09593331003782409)

Tota-Maharaj, Kiran and Paul, Parneet (2015) Investigating the influence of geotextile layers as biofilm granular filters to treat stormwater. Urban Water Journal, 12 (7). pp. 559-569. ISSN 1573-062X (Print), 1744-9006 (Online) (doi:10.1080/1573062X.2014.916726)

Tota-Maharaj, Kiran and Paul, Parneet (2015) Performance of pilot-scale microbial fuel cells treating wastewater with associated bioenergy production in the Caribbean context. International Journal of Energy and Environmental Engineering, 6 (3). pp. 213-220. ISSN 2008-9163 (Print), 2251-6832 (Online) (doi:10.1007/s40095-015-0169-x)

Tota-Maharaj, Kiran and Paul, Parneet (2015) Sustainable approaches for stormwater quality improvements with experimental geothermal paving systems. Sustainability, 7 (2). pp. 1388-1410. ISSN 2071-1050 (doi:10.3390/su7021388)

Tota-Maharaj, Kiran and Scholz, Miklas (2012) Combined permeable pavement and photocatalytic titanium dioxide oxidation system for urban run-off treatment and disinfection. Water and Environment Journal, 27 (3). pp. 338-347. ISSN 1747-6585 (Print), 1747-6593 (Online) (doi:10.1111/j.1747-6593.2012.00350.x)

Tota-Maharaj, Kiran and Scholz, Miklas (2010) Efficiency of permeable pavement systems for the removal of urban runoff pollutants under varying environmental conditions. Environmental Progress & Sustainable Energy, 29 (3). pp. 358-369. ISSN 1944-7442 (Print), 1944-7450 (Online) (doi:10.1002/ep.10418)

Tota-Maharaj, Kiran and Scholz, Miklas (2009) Permeable (pervious) pavements and geothermal heat pumps: addressing sustainable urban stormwater management and renewable energy. International Journal of Green Economics, 3 (3/4). pp. 447-461. ISSN 1744-9928 (Print), 1744-9936 (Online) (doi:10.1504/IJGE.2009.031334)

Tota-Maharaj, Kiran, Scholz, Miklas and Coupe, Stephen J. (2011) Modelling temperature and energy balances within geothermal paving systems. Road Materials and Pavement Design, 12 (2). pp. 315-344. ISSN 1468-0629 (Print), 2164-7402 (Online) (doi:10.1080/14680629.2011.9695248)

Trajkovic, Vladimir D., Rapajic, Predrag and Kennedy, Rodney A. (2008) Adaptive ordering for imperfect successive decision feedback multiuser detection. IEEE Transactions on Communications, 56 (2). pp. 173-176. ISSN 0090-6778 (doi:10.1109/TCOMM.2008.040650)

Trewin, Shari and Keates, Simeon (2005) Computer access for motor impaired users. In: Ghaoui, Claude, (ed.) Encyclopedia of Human Computer Interaction. Idea Group Inc (IGI), London, pp. 92-99. ISBN 9781591407980 (doi:10.4018/978-1-59140-562-7.ch015)

Trewin, Shari, Keates, Simeon and Moffatt, Karyn (2006) Developing steady clicks: a method of cursor assistance for people with motor. In: Eigth International ACM SIGACCESS Conference on Computers & Accessibility. ACM, New York, NY, USA, pp. 26-33. ISBN 1-59593-290-9 (doi:10.1145/1168987.1168993)

Trewin, Shari, Keates, Simeon and Moffatt, Karyn (2008) Individual responses to a method of cursor assistance. Disability and Rehabilitation: Assistive Technology, 3 (1-2). pp. 2-21. ISSN 1748-3107 (Print), 1748-3115 (Online) (doi:10.1080/17483100701273128)

Tripathi, Nimisha, Singh, Raj and Hills, Colin (2015) Reclamation of Mine-Impacted Land for Ecosystem Recovery. Wiley-Blackwell, Oxford, UK. ISBN 9781119057901

Unda, Inaki Grau, Papadopoulos, Panagiotis, Skarvelis-Kazakos, Spyros, Cipcigan, Liana M., Jenkins, Nick and Zabala, Eduardo (2014) Management of electric vehicle battery charging in distribution networks with multi-agent systems. Electric Power Systems Research, 110. pp. 172-179. ISSN 0378-7796 (doi:10.1016/j.epsr.2014.01.014)

Wan, Shan, Gao, James, Li, Dongbo and Evans, Richard (2014) Knowledge management for maintenance, repair and service of manufacturing. In: Advances in Manufacturing Technology XXVIII. Proceedings of the 12th International Conference on Manufacturing Research (ICMR2014). Hampshire Press Ltd, Southampton, UK, pp. 65-70. ISBN 978-0-9926958-4-2 ISSN 2053-3373

Wang, Tong, Zhang, Lingmi and Tee, Kong Fah (2011) Extraction of real modes and physical matrices from modal testing. Earthquake Engineering and Engineering Vibration, 10 (2). pp. 219-227. ISSN 1993-503X (online) (doi:10.1007/s11803-011-0060-6)

Wang, W., Liu, Z.D., Tian, Z.J., Huang, Y.H., Liu, Z.X. and Ekere, N.N. (2008) Study of wire electrolytic-spark hybrid machining of silicon solar wafer and surface characteristics. In: 2nd Electronics System Integration Technology Conference, Greenwich, UK. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc, Piscataway, NJ, USA, pp. 593-596. ISBN 978-1-4244-2813-7 (Print), 978-1-4244-2814-4 (Electronic) (doi:10.1109/ESTC.2008.4684417)

Wang, Yi, Ke, Maolong, Lancaster, M.J. and Huang, F. (2009) Micromachined millimeter-wave rectangular-coaxial branch-line coupler with enhanced bandwidth. IEEE Transactions on Microwave Theory and Techniques, 57 (7). pp. 1655-1660. ISSN 0018-9480 (doi:10.1109/TMTT.2009.2021872)

Wang, Yi, Ke, Maolong and Lancaster, Michael J. (2009) Micromachined 60 GHz air-filled interdigital bandpass filter. In: International Workshop on Microwave Filters, 16-18 November 2009, Toulouse, France.

Wang, Yi, Ke, Maolong and Lancaster, Michael J. (2010) Micromachined air-filled patch antennas for millimeter-wave applications. Microwave and Optical Technology Letters, 52 (6). pp. 1345-1347. ISSN 0895-2477 (Print), 1098-2760 (Online) (doi:10.1002/mop.25183)

Wang, Yi, Ke, Maolong and Lancaster, Michael J. (2009) A ka-band butler matrix with antenna array based on micromachined rectangular coaxial structures. In: European Microwave Week 2009 “Science, Progress and Quality at Radiofrequencies” Conference Proceedings 28 September - 2 October 2009. Rome, Italy. Horizon House Publications Ltd., London, UK, pp. 739-742. ISBN 9781424447480

Wang, Yi, Ke, Maolong, Lancaster, Michael J. and Chen, Jian (2011) Micromachined 300-GHz SU-8-based slotted waveguide antenna. IEEE Antennas and Wireless Propagation Letters, 10. pp. 573-576. ISSN 1536-1225 (doi:10.1109/LAWP.2011.2158285)

Wang, Yi and Lancaster, M. J. (2013) An investigation on the coupling characteristics of a novel multiplexer configuration. In: 43rd European Microwave Conference 2013, 8 -10 Oct 2013, Nuremberg, Germany. (Unpublished)

Wang, Yi, Yang, Bin, Tian, Yingtao, Donnan, Robert S. and Lancaster, Michael J. (2014) Micromachined thick mesh filters for millimeter-wave and terahertz applications. IEEE Transactions on Terahertz Science and Technology, 4 (2). pp. 247-253. ISSN 2156-342X (doi:10.1109/TTHZ.2013.2296564)

Wetherall, Jodie (2010) Investigation into an improved modular rule-based testing framework for business rules. PhD thesis, University of Greenwich.

Wetherall, Jodie and Woodhead, Steve (2008) Investigation into a modular rule-based testing method for testing business rules in scheduling applications. In: Proceedings of the 12th Word Multi-Conference on Systemics, Cybernetics and Informatics; Jointly with the 14th International Conference on Information Systems Analysis and Synthesis; WMSCI 2008. International Institute of Informatics and Systemics, Orlando, FL, USA, pp. 204-208. ISBN 9781934272312

Woodcock, C. R. (1978) The flow of particulate bulk solids in an air-assisted gravity conveyor. PhD thesis, Thames Polytechnic.

Woodhead, Stephen Robert (1992) The measurement of particle velocity and suspension density in pneumatic coal injection systems. PhD thesis, University of Greenwich.

Woodhead, Steve and Amadi-Echendu, J.E. (1995) Solid phase velocity measurements utilising electrostatic sensors and cross correlation signal processing. 1995 IEEE Instrumentation and Measurement Technology. Institute of Electrical and Electronics Engineers, New York, pp. 774-777. ISBN 978-0780326156 (doi:10.1109/IMTC.1995.515421)

Woodhead, Steve and Armour-Chelu, David (2002) Comparison of the electric charging properties of particulate materials in gas–solids flows in pipelines. Journal of Electrostatics, 56 (1). pp. 87-101. ISSN 0304-3886 (doi:10.1016/S0304-3886(02)00032-3)

Woodhead, Steve and Armour-Chelu, David (2003) The influence of humidity, temperature and other variables on the electric charging characteristics of particulate aluminium hydroxide in gas-solid pipeline flows. Journal of Electrostatics, 58 (3-4). pp. 171-183. ISSN 0304-3886 (doi:10.1016/S0304-3886(03)00046-9)

Woodhead, Steve and Ma, Mingchao (2006) Authentication delegation for subscription-based remote network services. Computers and Security, 25 (5). pp. 371-378. ISSN 0167-4048 (doi:10.1016/j.cose.2006.03.006)

Woodhead, Steve, Pittman, A.N. and Ashenden, Stuart J. (1995) Laser Doppler velocimetry measurements of particle velocity profiles in gas-solid two-phase flows. 1995 IEEE Instrumentation and Measurement Technology. Institute of Electrical and Electronics Engineers, New York, pp. 770-773. ISBN 978-0780326156

Wu, Ruiheng, Lidgey, F.J. and Hayatleh, K. (2007) Design of amplifiers with high gain accuracy and high linearity. 2007 50TH Midwest Symposium on Circuits and Systems. Midwest Symposium on Circuits and Systems Conference Proceedings, 1-3 . Institute of Electrical and Electronics Engineers, New York, pp. 269-272. ISBN 9781424411757 (doi:10.1109/MWSCAS.2007.4488586)

Wu, Ruiheng, Lidgey, F.J. and Hayatleh, K. (2008) Design of differential amplifier with negative impedance compensation. 2008 4th International Conference on Circuits and Systems for Communications. Institute of Electrical and Electronics Engineers, New York, pp. 589-593. ISBN 9781424417070 (doi:10.1109/ICCSC.2008.131)

Wu, Ruiheng, Lidgey, F.J., Hayatleh, K. and Hart, B.L. (2010) Differential amplifier with improved gain-accuracy and linearity. Interntional Journal of Circuit Theory and Applications, 38 (8). pp. 829-844. ISSN 0098-9886 (doi:10.1002/cta.601)

Wu, Ruiheng and Wang, Chen (2008) Stability analysis of the amplifier with negative impedance compensation. 2008 51st Midwest Symposium on Circuits and Systems. Institute of Electrical and Electronics Engineers, New York, pp. 803-806. ISBN 9781424421664

Xiao, Nan and Chen, Hua Peng (2011) Theoretical prediction on the shear capacities of shear connectors in steel column bases. Advances in Structural Engineering, 14 (5). pp. 953-966. ISSN 1369-4332 (doi:10.1260/1369-4332.14.5.953)

Xiao, Nan, Chen, Hua Peng, Sun, Liqiang and Wang, Hai (2011) New open-web roofs for integrating heat preservation & insulation and structural functions. In: 2011 International Conference on Multimedia Technology, ICMT 2011. IEEE Computer Society, Piscataway, USA, pp. 1123-1126. ISBN 9781612847719 (doi:10.1109/ICMT.2011.6002873)

Xiao, Nan, Chen, Hua Peng, Sun, Liqiang and Wang, Xiang (2011) Experimental study on thermal performance of improved open-web roofs with induced ventilation. In: 2011 International Conference on Multimedia Technology, ICMT 2011. IEEE Computer Society, Piscataway, USA, 6398 -6401. ISBN 9781612847719 (doi:10.1109/ICMT.2011.6002740)

Xu, Benshuai (2014) Time varying channel models for 5G mobile communication systems. PhD thesis, University of Greenwich.

Yan, Y., Byrne, B., Woodhead, Steve and Coulthard, John M. (1995) Velocity measurement of pneumatically conveyed solids using electrodynamic sensors. Measurement Science and Technology, 6 (5). pp. 515-537. ISSN 0957-0233 (Print), 1361-6501 (Online) (doi:10.1088/0957-0233/6/5/013)

Yang, Feng, Zhang, Zhenrong and Chen, Yifan (2009) Maximum-likelihood estimator for coarse carrier frequency offset estimation in OFDM systems. Wireless Personal Communications, 49 (1). pp. 55-66. ISSN 0929-6212 (Print), 1572-834X (Online) (doi:10.1007/s11277-008-9555-5)

Yang, Shangtong (2010) Concrete crack width under combined reinforcement corrosion and applied load. PhD thesis, University of Greenwich.

Yang, Shangtong and Li, Chun-Qing (2011) Numerical prediction for corrosion-induced concrete crack width. Proceedings of Institution of Civil Engineers: Construction Materials, 164 (6). pp. 293-303. ISSN 1747-650X (Print), 1747-6518 (Online) (doi:10.1680/coma.1000046)

Yaul, M., Culme-Seymour, E., Ruban, L., Veratich, F. S. and Bhatti, R. (2008) Firepolished glass microtools for human embryonic stem cell (HESC) cultivation. In: 7th Annual UKSB Conference and Postgraduate Day, 26-28 June 2008, University of Liverpool, UK. (Unpublished)

Zahir, Talha, Arshad, Kamran, Ko, Youngwook and Moessner, Klaus (2011) A downlink power control scheme for interference avoidance in femtocells. In: The 7th International Wireless Communications & Mobile Computing Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1222-1226. ISBN 9781424495399 ISSN http://dx.doi.org/10.1109/IWCMC.2011.5982714 (Online) (doi:10.1109/IWCMC.2011.5982714)

Zahir, Talha, Arshad, Kamran, Nakata, Atsushi and Moessner, Klaus (2012) Interference management in femtocells. IEEE Communications Surveys & Tutorials, 15 (1). pp. 293-311. ISSN 1553-877X (doi:10.1109/SURV.2012.020212.00101)

Zaman, Nafis Imtiaz, Al Mamun, Kazi M.D. Amullah, Uddin, Abu Moen Mohammad Salah and Kanakis, Triantafyllos (2010) Performance analysis of MIMO relaying channels'cooperative diversity for mobile networks. In: Proceedings - 2nd International Symposium on Data, Privacy, and E-Commerce, ISDPE 2010. IEEE Computer Society, Piscataway, USA, pp. 95-99. ISBN 9781424483778 (Print), 9780769542034 (Online) (doi:10.1109/ISDPE.2010.28)

Zammit, Joseph Paul, Gao, Xiaoyu and Shah, Satya (2014) A knowledge sharing framework for improving the testing processes in global product development. In: Advances in Manufacturing Technology XXVIII. Proceedings of the 12th International Conference on Manufacturing Research (ICMR2014). Southampton Solent University, Southampton, UK, pp. 77-82. ISBN 9780992695842 ISSN 2053-3373

Zand Fard, Nazanin, Chowdhry, Babur, Pollard, Lucy, Pullen, Francis, Snowden, Martin and Zotor, Francis (2015) Commercial ‘ready-to-feed’ infant foods in the UK: macro-nutrient content and composition. Maternal & Child Nutrition, 11 (2). pp. 202-214. ISSN 1740-8695 (Print), 1740-8709 (Online) (doi:10.1111/j.1740-8709.2012.00445.x)

Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.

Zhang, Pengcheng and Gao, James (2010) Requirements driven knowledge system design for product development. In: Proceedings of the 6th CIRP-Sponsored International Conference on Digital Enterprise Technology. Advances in Intelligent and Soft Computing, 66/201 . Springer, Hong Kong, pp. 169-184. ISBN 9783642104299 ISSN 1867-5662 (doi:10.1007/978-3-642-10430-5_13)

Zhang, Pengcheng, Gao, James and Wang, Yinglin (2011) Requirement driven knowledge management system design to support automotive product development. International Journal of Product Lifecycle Management (IJPLM), 5 (2-4). pp. 202-223. ISSN 1743-5110 (doi:10.1504/IJPLM.2011.043188)

Zhang, Taoyuan, Owodunni, Oladele and Gao, James (2015) Scenarios in Multi-objective Optimisation of Process Parameters for Sustainable Machining. Procedia CIRP, 26. pp. 373-378. ISSN 2212-8271 (doi:10.1016/j.procir.2014.07.186)

Zhang, Yan, Chen, Yifan, He, Jianhua, Wang, Cheng-Xiang and Vasilakos, Athanasios V. (2009) Call admission control algorithms in OFDM-based wireless multiservice networks. Wireless Personal Communications, 50 (1). pp. 99-114. ISSN 0929-6212 (Print), 1572-834X (Online) (doi:10.1007/s11277-008-9540-z)

Zhang, Yongquan, Li, Youmei, Sun, Jianyong and Ji, Jiabing (2014) Estimates on compressed neural networks regression. Neural Networks, 63. pp. 10-17. ISSN 0893-6080 (doi:10.1016/j.neunet.2014.10.008)

Zhou, X.Z., Zheng, J.J. and Li, Chun-Qing (2006) An analytical method for prediction of the elastic modulus of concrete. Magazine of Concrete Research, 58 (10). pp. 665-673. ISSN 0024-9831 (doi:10.1680/macr.2006.58.10.665)

Zhou, Xiangming, Li, Zongjin, Fan, Mizi and Chen, HuaPeng (2013) Rheology of semi-solid fresh cement pastes and mortars in orifice extrusion. Cement and Concrete Composites, 37. pp. 304-311. ISSN 0958-9465 (doi:10.1016/j.cemconcomp.2013.01.004)

Zhu, Haihua, Gao, James, Li, Dongbo and Tang, Dunbing (2012) A Web-based Product Service System for aerospace maintenance, repair and overhaul services. Computers in Industry, 63 (4). pp. 338-348. ISSN 0166-3615 (doi:10.1016/j.compind.2012.02.016)

Zigan, Stefan and Patel, Amit (2013) Theoretical and experimental testing of a scaling rule for predicting segregation in differently sized silos. KONA Powder and Particle Journal, 30. pp. 276-283. ISSN 0288-4534 (Print), 2187-5537 (Online)

Zigan, Stefan, Thorpe, Rex B., Tuzun, Ugur, Enstad, Gisle G. and Battistin, Flavio (2007) Theoretical and experimental testing of a scaling rule for air current segregation of alumina powder in cylindrical silos. Powder Technology, 183 (1). pp. 133-145. ISSN 0032-5910 (doi:10.1016/j.powtec.2007.11.030)

van Manen, P. (1984) The dynamic behaviour of rail vehicles operating at high speeds for manriding in British coal mines. PhD thesis, Thames Polytechnic.

von Bruhn Hinné, Thomas and Keates, Simeon (2011) Using motion sensing remote controls with older adults. In: Universal Access in Human-Computer Interaction. Design for All and eInclusion: 6th International Conference, UAHCI 2011, Proceedings, Part II. Lecture Notes in Computer Science, 6766 . Springer Berlin Heidelberg, Berlin, Germany, pp. 166-175. ISBN 978-3-642-21662-6 ISSN 0302-9743 (Print), 1611-3349 (Online) (doi:10.1007/978-3-642-21663-3_18)

This list was generated on Thu Oct 13 03:54:20 2016 BST.