Items where School / Department / Research Groups is "School of Engineering"

A

AL-Shawabkeh, Abdallah and Tambyrajah, Antony (2009) Knowledge management in Jordanian banks. International Journal of Knowledge, Culture and Change Management, 9 (9). pp. 105-124. ISSN 1447-9524

Abou-Chakra, H., Tüzün, Ugur, Bridle, Ian, Leaper, M.C., Bradley, Michael S.A. and Reed, Alan R. (2003) Assessing the potential of a fine powder to segregate using laser diffraction and sieve particle size measuring techniques. Advanced Powder Technology, 14 (2). pp. 167-176. ISSN 0921-8831 (doi:10.1163/156855203763593967)

Aboutalebi, M., Banan, M.R. and Banan, M.R. (2010) Parametric study on the effect of burial depth on the surface explosion resistance of cylindrical concrete oil tanks. International Journal of Physical Sciences, 5 (1). 030-038. ISSN 1992-1950

Abramovich, H., Burgard, M., Edery-Azulay, L., Evans, K. E., Hoffmeister, M., Miller, W., Scarpa, F., Smith, C. W., Tee, Kong-Fah, Schönecker, A. and Seffner, L. (2008) Sensing and actuation of smart chiral honeycombs. Proceedings of SPIE, 6935, 693506. ISSN 0277-786X (doi:10.1117/12.775588)

Abramovich, H., Burgard, M., Edery-Azulay, Lucy, Evans, K.E., Hoffmeister, M., Miller, W., Scarpa, F., Smith, C.W. and Tee, Kong-Fah (2010) Smart tetrachiral and hexachiral honeycomb: sensing and impact detection. Composites Science and Technology, 70 (7). 1072-1079 . ISSN 0266-3538 (doi:10.1016/j.compscitech.2009.07.017)

Adekunle, A.A. and Woodhead, S.R. (2012) An AEAD cryptographic framework and tiny AEAD construct for secure WSN communication. In: Wireless Advanced (WiAd), 2012. IEEE Conference Publications . Institution of Electrical and Electronics Engineering, Inc., Piscataway, N.J, USA, pp. 1-5. ISBN 9781457721939 (doi:10.1109/WiAd.2012.6296560)

Adekunle, A.A. and Woodhead, S.R. (2009) On efficient data integrity and data origin authentication for wireless sensor networks utilising block cipher design techniques. In: NGMAST 2009: the Third International Conference on Next Generation Mobile Applications, Services and Technologies. IEEE Computer Society Press, Cardiff, UK, pp. 419-424. ISBN 978-0-7695-3786-3 (doi:10.1109/NGMAST.2009.78)

Adekunle, A.A. and Woodhead, S.R. (2010) Zone based systems design framework for the realisation of efficient block cipher based message authentication code algorithms. In: 5th International Conference on Availability, Reliability, and Security, ARES 2010. IEEE Xplore Digital Library, Piscataway, NJ, USA, pp. 216-221. ISBN 978-1-4244-5879-0 (doi:10.1109/ARES.2010.109)

Adekunle, A.A. and Woodhead, S.R. (2010) An efficient authenticated-encryption with associated-data block cipher mode for wireless sensor networks. In: Wired/Wireless Internet Communications. 8th International Conference, WWIC 2010, Lulea, Sweden, June 1-3, 2010. Proceedings. Lecture Notes in Computer Science (6074). Springer, Berlin / Heidelberg / NewYork, pp. 375-385. ISBN 978-3-642-13314-5 (doi:10.1007/978-3-642-13315-2_31)

Adekunle, A.A. and Woodhead, S.R. (2010) A resourceful combined block cipher mode of operation for packetised network communication. In: Proceedings - NGMAST 2010: 4th International Conference on Next Generation Mobile Applications, Services, and Technologies. IEEE Computer Society, Piscataway, USA, pp. 180-185. ISBN 9781424476497 (doi:10.1109/NGMAST.2010.44)

Ahangar-Asr, A., Faramarzi, A., Mottaghifard, N. and Javadi, A.A. (2011) Modeling of permeability and compaction characteristics of soils using evolutionary polynomial regression. Computers & Geosciences, 37 (11). pp. 1860-1869. ISSN 0098-3004 (doi:10.1016/j.cageo.2011.04.015)

Ahangar-Asr, Alireza, Faramarzi, Asaad and Javadi, Akbar A. (2010) A new approach for prediction of the stability of soil and rock slopes. Engineering Computations, 27 (7). pp. 878-893. ISSN 0264-4401 (doi:10.1108/02644401011073700)

Ahangar-Asr, Alireza, Faramarzi, Asaad, Javadi, Akbar A. and Giustolisi, Orazio (2011) Modelling mechanical behaviour of rubber concrete using evolutionary polynomial regression. Engineering Computations, 28 (4). pp. 492-507. ISSN 0264-4401 (doi:10.1108/02644401111131902)

Al Mamun, Kazi Md. Abdullah and Zaman, Nafis Imtiaz (2010) Cooperative diversity performance of SISO relaying channel for mobile networks. In: Ninth International Symposium on Distributed Computing and Applications to Business Engineering and Science (DCABES), 2010. International Symposium on Distributed Computing and Applications to Business Engineering and Science . IEEE Xplore Digital Library, Piscataway, NJ, USA, pp. 249-253. ISBN 978-1-4244-7539-1 (doi:10.1109/DCABES.2010.57)

Alani, A., MacMullen, J., Telik, O. and Zhang, Z.Y. (2012) Investigation into the thermal performance of recycled glass screed for construction purposes. Construction and Building Materials, 29. pp. 527-532. ISSN 0950-0618 (doi:10.1016/j.conbuildmat.2011.07.020)

Alani, Amir M. and Aboutalebi, Morteza (2012) Analysis of the subgrade stiffness effect on the behaviour of ground-supported concrete slabs. Structural Concrete, 13 (2). pp. 102-108. ISSN 1464-4177 (doi:10.1002/suco.201100043)

Alani, Amir M. and Beckett, Derrick (2013) Mechanical properties of a large scale synthetic fibre reinforced concrete ground slab. Journal of Construction and Building Materials, 41. pp. 335-344. ISSN 0950-0618 (doi:10.1016/j.conbuildmat.2012.11.043)

Ali, M. Tanseer, Wu, Ruiheng, Callaghan, Peter and Rapajic, Predrag (2011) Experimental study of a highly linear amplifier using negative impedance compensation technique. In: Proceedings of the Active RF Devices, Circuits and Systems Seminar. IET Conference Publications . Institution of Engineering and Technology, London, UK, pp. 35-38. ISBN 978-1-84919-540-9 (Online) (Unpublished) (doi:10.1049/ic.2011.0211)

Ali, M.Tanseer, Wu, Ruiheng, Callaghan, Peter and Rapajic, Predrag (2011) Design of a highly linear high frequency amplifier using Volterra model. In: Microwave, Antenna, Propagation, and EMC Technologies for Wireless Communications (MAPE). Microwave, Antenna, Propagation, and EMC Technologies for Wireless Communications (MAPE) . Institute of Electrical and Electronic Engineers, Pistacaway, USA, pp. 355-358. ISBN 978-1-4244-8268-9 (doi:10.1109/MAPE.2011.6156259)

Amadi-Echendu, J.E. and Woodhead, Steve (1995) Characterising noise signals in 2-phase solid gas flows. In: 1995 IEEE Instrumentation and Measurement Technology. Institute of Electrical and Electronics Engineers, New York, pp. 778-781. ISBN 978-0780326156 (doi:10.1109/IMTC.1995.515422)

Amalu, E.H, Ekere, N.N. and Aminu, G. (2011) Effects of inter-metallic compound on high temperature reliability of flip chip interconnects for fine pitch applications. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 208-213. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145173)

Amalu, E.H., Ekere, N.N. and Bhatti, R.S. (2010) High temperature electronics: R&D challenges and trends in materials, packaging and interconnection technology. In: 2nd International Conference on Adaptive Science & Technology, 2009. (ICAST 2009). Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 146-153. ISBN 978-1-4244-3522-7 ISSN 0855-8906 (doi:10.1109/ICASTECH.2009.5409731)

Amalu, E.H., Ekere, N.N., Bhatti, R.S., Mallik, S., Takyi, G. and Ibhadode, A.O.A. (2011) Numerical investigation of thermo-mechanical behaviour of ball grid array solder joint at high temperature excursion. Advanced Materials Research, 367. pp. 287-292. ISSN 1662-8985 (Print), 1022-6680 (Online) (doi:10.4028/www.scientific.net/AMR.367.287)

Amalu, E.H., Lau, W.K., Ekere, N.N., Bhatti, R.S., Mallik, S., Otiaba, K.C. and Takyi, G. (2011) A study of SnAgCu solder paste transfer efficiency and effects of optimal reflow profile on solder deposits. Microelectronic Engineering, 88 (7). pp. 1610-1617. ISSN 0167-9317 (doi:10.1016/j.mee.2011.02.104)

Amalu, Emeka H., Ekere, Ndy and Mallik, Sabuj (2011) Evaluation of rheological properties of lead-free solder pastes and their relationship with transfer efficiency during stencil printing process. Materials and Design, 32 (6). pp. 3189-3197. ISSN 0261-3069 (doi:10.1016/j.matdes.2011.02.045)

Amalu, Emeka H. and Ekere, Ndy N. (2012) High temperature reliability of lead-free solder joints in a flip chip assembly. Journal of Materials Processing Technology, 212 (2). pp. 471-483. ISSN 0924-0136 (doi:10.1016/j.jmatprotec.2011.10.011)

Amalu, Emeka H., Lui, Y.T., Ekere, Ndy, Bhatti, R.S. and Takyi, G. (2011) Investigation of the effects of reflow profile parameters on lead-free solder bump volumes and joint integrity. In: AIP Conference Proceedings. American Institute of Physics, Melville, NY, USA, pp. 639-644. (doi:10.1063/1.3552519)

Amalu, Emeka Hyginus (2012) Modelling of the reliability of flip chip lead-free solder joints at high-temperature excursions. PhD thesis, University of Greenwich.

Anang, K.A., Rapajic, P.B., Bello, L. and Wu, R. (2012) Sensitivity of cellular wireless network performance to system and propagation parameters at carrier frequencies greater than 2 GHz. Progress In Electromagnetics Research B (PIERB), 40. pp. 31-54. ISSN 1937-6472 (doi:10.2528/PIERB12012303)

Anang, K.A., Rapajic, P.B., Eneh, T.I. and Bello, L. (2011) Sensitivity of information capacity of land mobile cellular system to propagation loss parameters at higher microwave frequencies. In: Wireless Communications and Mobile Computing Conference (IWCMC), 2011 7th International. Institute of Electrical and Electronic Engineers, Piscataway, NJ, USA, pp. 630-635. ISBN 978-1-4244-9539-9 (doi:10.1109/IWCMC.2011.5982619)

Anang, K.A., Rapajic, P.B., Eneh, T.I., Bello, L. and Oletu, G. (2012) Impact of vehicular traffic on information capacity of cellular wireless network at carrier frequencies greater than 3 GHz. In: 2011 Fifth UKSim European Symposium on Computer Modeling and Simulation (EMS). Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 430-434. ISBN 978-1-4673-0060-5 (doi:10.1109/EMS.2011.19)

Anang, K.A., Rapajic, P.B., Eneh, T.I. and Nijsure, Y. (2011) Minimum cell size for information capacity increase in cellular wireless network. In: Vehicular Technology Conference (VTC Spring), 2011 IEEE 73rd. Institute of Electrical and Electronic Engineers, Piscataway, NJ, USA. ISBN 978-1-4244-8332-7 ISSN 1550-2252 (doi:10.1109/VETECS.2011.5956350)

Anang, K.A., Rapajic, P.B., Eneh, T.I. and Oletu, G. (2011) Sensitivity of information capacity of land mobile cellular system to the base station antenna height at higher microwave frequencies. In: Computer Research and Development (ICCRD), 2011 3rd International Conference on. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 167-172. ISBN 978-1-61284-839-6 (doi:10.1109/ICCRD.2011.5764271)

Anang, K.A., Rapajic, P.B., Wu, R., Bello, L. and Eneh, T.I. (2012) Cellular system information capacity change at higher frequencies due to propagation loss and system parameters. Progress In Electromagnetics Research B, 44. pp. 191-221. ISSN 1937-6472 (doi:10.2528/PIERB12080908)

Anang, Kwashie A., Bello, Lawal, Eneh, Titus I., Bakalis, Panos and Rapajic, Predrag B. (2012) The performance of Dynamic Source Routing protocol to path loss models at carrier frequencies above 2 GHz. In: 2011 IEEE 13th International Conference on Communication Technology (ICCT). Institute of Electronic and Electrical Engineers, Inc., Piscataway, NJ, USA, pp. 151-155. ISBN 978-1-61284-306-3 (print) (doi:10.1109/ICCT.2011.6157852)

Andrews, D. G. H. (1979) The measurement of the velocities of particles in an air-solid flow. PhD thesis, Thames Polytechnic.

Angulo, O., Berry, R., Bradley, M. and Antonijevic, M. (2009) Modelling of a dosator: an analytical approach based on measured powder flow properties. Journal of Pharmacy and Pharmacology, 61 (S1). A123-A123. ISSN 0022-3573 (Print), 2042-7158 (Online) (doi:10.1211/002235709789037053)

Angulo Pinzon, O.A., Bradley, Michael S.A., Berry, Rob and Farnish, Richard J. (2008) Modelling dosator filling and discharge of powder. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 586-591. ISBN 9788272062896

Angulo Pinzon, Oscar Andres (2012) Modelling of dosator filling and discharge. PhD thesis, University of Greenwich.

Arami, Mitra (2008) Introduction of project management courses at university: a case study. PM World Today, 10 (8).

Arami, Mitra, Meyer, David and Sester, Antje (2005) Key factors for a better understanding of Mobile Java Games customers. In: Wirtschaftsinformatik 2005: eEconomy, eGovernment, eSociety. Physica-Verlag / Springer, Heidelberg, Germany, pp. 351-370. ISBN 978-3-7908-1624-2 (doi:10.1007/3-7908-1624-8_19)

Aravena, Jazmín E. and Dussaillant, Alejandro (2009) Storm-water infiltration and focused recharge modeling with finite-volume two-dimensional Richards equation: application to an experimental rain garden. Journal of Hydraulic Engineering, 135 (12). pp. 1073-1080. ISSN 0733-9429 (doi:10.1061/(ASCE)HY.1943-7900.0000111)

Ariza-Zafra, K., Berry, Rob and Bradley, Michael S.A. (2008) Review of models for predicting the discharge rates of bulk particulates from silos and bins. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 484-492. ISBN 9788272062896

Ariza-Zafra, K., Berry, R., Bradley, M.S.A. and Santana, J.C. (2010) Achieving mass flow in silos with shallow converging sections using inverted cones. Bulk Solids Handling (Whitepaper). ISSN 0173-9980

Arshad, Kamran, Imran, Muhammad Ali and Moessner, Klaus (2010) Collaborative spectrum sensing optimisation algorithms for cognitive radio networks. International Journal of Digital Multimedia Broadcasting, 2010:424036. pp. 1-20. ISSN 1687-7578 (Print), 1687-7586 (Online) (doi:10.1155/2010/424036)

Ashley, Richard Martin (1980) Forces on cylinders in relative fluid motion. MPhil thesis, Thames Polytechnic.

Aziz, Hayder, Li, Zhengxi and Gao, James (2008) Engineering design knowledge management in de-centralised virtual enterprises. Computer Aided Design and Applications, 5 (6). pp. 787-800. ISSN 1686-4360 (doi:10.3722/cadaps.2008.787-800)

Aziza-Zafra, Karol (2010) A hat trick for coal handling. International Bulk Journal, 5. pp. 67-70. ISSN 0260-1087

B

Bakalis, P.S. and Ellis, J.E. (1995) The use of optimisation algorithms as an aid for determining process control configurations. In: Large Scale Systems: Postprint Volume from the 7th IFAC/IFORS/IMACS Symposium, London, UK, 11-13 July 1995: Theory and Applications, 1995. IPPV IFAC Postprint . Pergamon, pp. 333-338. ISBN 0080423655

Bakalis, Panos and Lawal, Bello (2010) Performance evaluation of CBR and TCP traffic models on MANET using DSR routing protocol. In: 2010 International Conference on Communications and Mobile Computing. IEEE Computer Society, Los Alamitos, CA, USA, pp. 318-322. ISBN 9780769539898 (doi:10.1109/CMC.2010.185)

Bakalis, Panos and Ellis, J.E. (1989) Simulation of hierarchical control algorithms using a steady-state mathematical model of a vaporizer plant. Applied Mathematical Modelling, 13 (7). pp. 413-419. ISSN 0307-904X (doi:10.1016/0307-904X(89)90153-4)

Bakalis, Panos and Ellis, J.E. (1992) The application of large-scale systems optimization control algorithms. Applied Mathematical Modelling, 16 (4). pp. 201-207. ISSN 0307-904X (doi:10.1016/0307-904X(92)90058-B)

Balasubramanyam, Ramkumar and Rapajic, Predrag (2008) Adaptive ‘imperfect’ decision feedback equalizer for a frequency selective communication channel. In: Proceedings of the 1st International Conference on Signal Processing and Telecommunication Systems ICSPCS'2007 Australia, Gold Coast December 17-19, 2007. DSP for Communication Systems, Tarrawanna, New South Wales, Australia, pp. 503-507. ISBN 9780975693445

Balasubramanyam, Ramkumar (2008) Adaptive iterative multiuser detection for wireless communication systems. PhD thesis, University of Greenwich.

Baxter, David, Doultsinou, Athanasia, Roy, Rajkumar and Gao, James (2010) A life cycle model for product-service systems design. In: 5th International Conference on Digital Enterprise Technology. Publibook, Paris, France, pp. 441-456.

Baxter, David, Gao, James, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2008) A framework to integrate design knowledge reuse and requirements management in engineering design. Robotics and Computer-Integrated Manufacturing, 24 (4). pp. 585-593. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.010)

Baxter, David, Rajkumar, Roy and Gao, James (2008) Design process knowledge reuse challenges and issues. Computer Aided Design and Applications, 5 (6). pp. 942-952. ISSN 1686-4360 (doi:10.3722/cadaps.2008.942-952)

Baxter, David, Roy, Rajkumar, Doultsinou, Athanasia, Gao, James and Kalta, Mohamad (2009) A knowledge management framework to support product-service systems design. International Journal of Computer Integrated Manufacturing, 22 (12). pp. 1073-1088. ISSN 0951-192X (Print), 1362-3052 (Online) (doi:10.1080/09511920903207464)

Beams, Rodney and Coutroubis, Alec (2008) The use of computer based teaching (CBT) in the training of marine engineers. In: 2nd International Scientific Maritime Conference - Human Resources in the Shipping Industry: New Trends and Challenges in the 21st Century, 21-22 November 2008, Limassol. (Unpublished)

Bello, L., Bakalis, P., Manam, S.J., Eneh, T.I. and Anang, K.A. (2011) Power control and performance comparison of AODV and DSR ad hoc routing protocols. In: Computer Modelling and Simulation (UKSim), 2011 UkSim 13th International Conference on. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 457-460. ISBN 978-1-61284-705-4 (doi:10.1109/UKSIM.2011.93)

Bello, Lawal, Anang, Kwashie A., Bakalis, Panos, Rapajic, Predrag B. and Eneh, Titus I. (2012) Sensitivity of DSR protocol performance to propagation loss models at higher microwave frequencies. In: 2012 Proceedings 14th International Conference on Modelling and Simulation (UKSim). IEEE Conference Publications . The Institute of Electrical and Electronics Engineers, Inc, California & Washington, USA and Tokyo, Japan, pp. 561-565. ISBN 978-0-7695-4682-7 (doi:10.1109/UKSim.2012.85)

Bello, Lawal, Bakalis, Panos, Manam, Samuel J., Eneh, Titus and Anang, Kwashie A. (2011) Power control and performance comparison of AODV and DSR ad hoc routing protocols. In: Proceedings 2011 UKSim 13th International Conference on Modelling and Simulation (UkSim 2011). IEEE Conference Publications, 1 . Institute of Electrical and Electronics Engineers (IEEE) , Los Alamitos, Caifornia and Washington, US. Tokyo, Japan, pp. 457-460. ISBN 978-0-7695-4376-5 (doi:10.1109/UKSIM.2011.93)

Bello, Lawal, Bakalis, Panos, Manam, Samuel John and Eneh, Titus (2011) Performance optimisation of mobile ad hoc reactive routing protocols. Advanced Materials Research, 367 . pp. 249-254. ISSN 1662-8985 (Print), 1022-6680 (Online) (doi:10.4028/www.scientific.net/AMR.367.249)

Bello, Lawal, Bakalis, Panos, Rapajic, Predrag, Anang, Kwashie A. and Eneh, Titus I. (2011) Adaptive receiver power routing protocol for mobile ad hoc wireless network. Journal of Communications, 6 (7). pp. 571-580. ISSN 1796-2021 (doi:10.4304/jcm.6.7.571-580)

Berkhauer-Smith, Samantha (2009) The integration of lean thinking and manufacturing business improvement methods within the aerospace supply chain. PhD thesis, University of Greenwich.

Bernasko, P.K., Mallik, S., Ekere, N.N., Seman, A. and Tayki, G. (2010) Effect of reflow profile and thermal cycle ageing on the intermetallic formation and growth in lead-free soldering. In: Electronics Packaging Technology. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 986-990. ISBN 978-1-4244-5100-5 (electronic), 978-1-4244-5099-2 (print) (doi:10.1109/EPTC.2009.5416398)

Bernasko, Peter, Mallik, Sabuj, Ekere, Ndy and Takyi, G. (2011) Evaluating the effect of pad sizes on the inter-metallic layer formation and growth for Sn-Ag-Cu solders on Cu metallization. In: International Conference on Electronics Packaging (ICEP) 2011, 13-15 April 2011, Nara Prefectural New Public Hall, Nara, Japan.

Bernasko, Peter Kojo (2012) Study of intermetallic compound layer formation, growth and evaluation of shear strength of lead-free solder joints. PhD thesis, University of Greenwich.

Berry, Rob, Bradley, Michael S.A., Farnish, Richard J. and Angulo Pinzon, O.A. (2008) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 344-350. ISBN 9788272062896

Berry, Rob, Bradley, Michael S.A., Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction test procedure, suitable for equipment design and powder characterisation. In: ICBMH Conference: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, Australia. (Unpublished)

Berry, R.J. and Bradley, M.S.A. (2010) Development of the Brookfield Powder Flow Tester. In: Bulk Solids Europe 2010 Conference and IMechE Symposium in New Frontiers in Bulk Materials Handling , 9-10 September 2010, Glasgow. (Submitted)

Bhatti, Rajinderpal and Berkhauer-Smith, Samantha (2007) Integrating both technical and cultural aspects of process improvement. In: 5th International Conference on Manufacturing Research (ICMR 2007) , 11- 13 September 2007, De Montfort University Leicester. (Unpublished)

Bhatti, Rajinderpal and Berkhauer-Smith, Samantha (2007) An integrated methodology of manufacturing business improvement strategies. In: Advances in production management systems. International Federation for Information Processing, 246 . Springer, Boston, USA, pp. 355-362. ISBN 9780387741567 (doi:10.1007/978-0-387-74157-4)

Bhatti, Rajinderpal, Chowdary, Boppana V. and Sahatoo, Divesh (2007) Some STL file generation issues in rapid prototyping. In: 5th Latin American and Caribbean Conference for Engineering and Technology Developing Entrepreneural Engineers for the Sustainable Growth of Latin American and Caribbean: Education, Innovation, Technology, and Practice. Latin American and Caribbean Consortium of Engineering Institutions, Florida. ISBN 098228960X

Bradley, M.S.A., Burnett, A.J. and Woodhead, Steve (1995) Measurement of pressure profiles in pneumatic conveying pipelines. In: 1995 IEEE Instrumentation and Measurement Technology. Institute of Electrical and Electronics Engineers, New York, pp. 766-769. ISBN 978-0780326156 (doi:10.1109/IMTC.1995.515419)

Bradley, Michael S.A. and Berry, Rob (2007) Investigation of the effect of test procedure factors on the failure loci and derived failure functions obtained from annular shear cells. Powder Technology, 174 (1-2). pp. 60-63. ISSN 0032-5910 (doi:10.1016/j.powtec.2006.10.023)

Bradley, Michael S.A., Berry, Rob, Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia. (Unpublished)

Bradley, Michael S.A., Berry, Rob and Pillai, John (2007) Comparison between the angles of wall friction measured on an on-line wall friction tester and the Jenike wall friction tester. Powder Technology, 174 (1-2). pp. 64-70. ISSN 0032-5910 (doi:10.1016/j.powtec.2006.10.024)

Bradley, Michael S.A., Berry, Rob, Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction tester and test procedure, suitable for equipment design and powder characterisation. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)

Bradley, Michael S.A., Farnish, Richard J., Reed, Alan R. and Kulkarni, Prasanna (2007) Evaluation of air induced segregation tendencies in pharmaceutical blends using a bench scale tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)

Bradley, Michael S.A., Reed, Alan R., Berry, Rob and Holmes, C.P.M. (2008) Start-up and running forces on bulk solids feeders: experimental findings versus available models. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 450-457. ISBN 9788272062896

Bradley, Michael, Berry, Robert and Farnish, Richard (2011) Methods for design of hoppers. Silos, bins and bunkers for reliable gravity flow, for pharmaceutical, food, mineral and other applications. In: BulkSolids India 2011, 6-8 April 2011, Mumbai, India. (Unpublished)

Bradley, Michael, Farnish, Richard and Deng, Tong (2011) Predicting and preventing wear in pneumatic conveying systems. In: BulkSolids India 2011, 6-8 April 2011, Mumbai, India. (Unpublished)

Burnett, A.J., Desilva, S.R. and Reed, Alan R. (1995) Comparisons between “sand blast” and “centripetal effect accelerator” type erosion testers. Wear, 186-187 (1). pp. 168-178. ISSN 0043-1648 (doi:10.1016/0043-1648(95)07143-1)

Burnett, A. J. (1993) Wear in pneumatic conveying pipelines. Powder Handling and Processing, 15 (2). pp. 123-128. ISSN 0934-7348

Burnett, A.J., Bradley, M.S.A., O'Flynn, D.J., Deng, T. and Bingley, M. (1999) Anomalies in the results obtained from rotating disc accelerator erosion testers: a discussion of possible causes. Wear, 233-5. pp. 275-283. ISSN 0043-1648 (doi:10.1016/s0043-1648(99)00227-6)

Burnett, A.J., De Silva, S.R. and Reed, A.R. (1995) Comparisons between "sand blast" and "centripetal effect accelerator" type erosion testers. Wear, 186-87 (PART 1). pp. 168-178. ISSN 0043-1648 (doi:10.1016/0043-1648(95)07143-1)

Burnett, Anthony John (1996) The use of laboratory erosion tests for the prediction of wear in pneumatic conveyor bends. PhD thesis, University of Greenwich.

C

Callaghan, P., Sagor, M.H. and Batchelor, J.C. (2011) Control of ground plane influence on antenna radiation pattern for mobile handheld devices. In: Antennas and Propagation Conference (LAPC). IEEE Xplore Digital Library, Loughborough, UK, pp. 1-4. ISBN 978-1-4577-1014-8 ISSN 978-1-4577-1015-5 (online) (doi:10.1109/LAPC.2011.6114127)

Callaghan, Peter and Batchelor, John C (2008) Dual-band pin-patch antenna for wi-fi applications. IEEE Antennas and Wireless Propagation Letters, 7. pp. 757-760. ISSN 1536-1225 (doi:10.1109/LAWP.2008.2004885)

Callaghan, Peter, Gomes, Nathan J., Batchelor, John C. and Formont, Stephane (2009) Experimental investigation of an optically fed phase array for UWB personal area networks. In: International Topical Meeting on Microwave Photonics, 2009. MWP '09. Universidad Politécnica de Valencia, Valencia, Spain. ISBN 978-1-4244-4788-6

Carter, R.M., Krabicka, Jan, Yan, Y. and Cornwell, S. (2009) An integrated instrumentation system for combustion plant optimisation. pp. 780-784. (doi:10.1109/IMTC.2009.5168556)

Cetin, D., Yildirim, S. and Kilic, G. (2011) A New Approach for Determination of Adhesion Coefficient in Pipejacking Method by Experimental and Numerical Analysis: An Example from Istanbul. Experimental Techniques. pp. 1-17. ISSN 1046-6789 (doi:10.1111/j.1747-1567.2011.00764.x)

Chen, Hua-Peng, Stevenson, Morris and Li, Chun-Qing (2008) Assessment of existing soakaways for reuse. Proceedings of the Institution of Civil Engineers-Water Management, 161 (3). pp. 141-149. ISSN 1741-7589 (doi:10.1680/wama.2008.161.3.141)

Chen, Hua-Peng, Wang , K.L. and Tee, Kong-Fah (2010) Structural health monitoring utilizing dynamic perturbation method. In: 3rd International Conference on Dynamics, Vibration and Control (ICDVC), 12-14 May 2010, Hangzhou, China.

Chen, Yifan, Gunawan, Erry, Low, Kay Soon, Wang, Shih-Chang, Soh, Cheong Boon and Putti, Thomas Choudary (2008) Effect of lesion morphology on microwave signature in 2-D ultra-wideband breast imaging. IEEE Transactions on Biomedical Engineering, 55 (8). pp. 2011-2021. ISSN 0018-9294 (doi:10.1109/TBME.2008.921136)

Chen, Yifan, Gunawan, Erry, Low, Kay Soon, Wang, Shih-Chang, Soh, Cheong Boon and Putti, Thomas Choudary (2008) Time-reversal ultrawideband breast imaging: pulse design criteria considering multiple tumors with unknown tissue properties. IEEE Transactions on Antennas and Propagation, 56 (9). pp. 3073-3077. ISSN 0018-926X (doi:10.1109/TAP.2008.928811)

Chen, Yifan, Hu, Luoquan, Yuen, Chau, Zhang, Yan, Zhang, Zhenrong and Rapajic, Predrag (2009) Cooperative diversity of generalized distributed antenna systems. In: Cooperative Wireless Communications. Wireless Networks and Mobile Communications . Auerbach Publications, pp. 233-258. ISBN 978-1420064698

Chen, Yifan and Rapajic, Predrag (2008) Human respiration rate estimation using ultra-wideband distributed cognitive radar system. International Journal of Automation and Computing, 5 (4). pp. 325-333. ISSN 1476-8186 (doi:10.1007/s11633-008-0325-3)

Chen, Yifan and Rapajic, Predrag (2008) Ultra-wideband cognitive interrogator network for indoor location tracking. Part 1: system architecture and network performance analysis. In: 2008 IEEE 19th International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-5. ISBN 9781424426447 (doi:10.1109/PIMRC.2008.4699464)

Chen, Hua Peng (2010) Mode shape expansion using perturbed force approach. Journal of Sound and Vibration, 329 (8). pp. 1177-1190. ISSN 0022-460X (doi:10.1016/j.jsv.2009.10.027)

Chen, Hua Peng, Guo, Z. and Zhou, X. (2012) Stress singularities of contact problems with a frictional interface in anisotropic bimaterials. Fatigue & Fracture of Engineering Materials & Structures. ISSN 1460-2695 (In Press) (doi:10.1111/j.1460-2695.2011.01642.x)

Chen, Hua Peng and Xiao, Nan (2012) Analytical solutions for corrosion-induced cohesive concrete cracking. Journal of Applied Mathematics, 25. pp. 2-25. ISSN 1110-757X (doi:10.1155/2012/769132)

Chen, Hua-Peng (2008) Application of regularization methods to damage detection in large scale plane frame structures using incomplete noisy modal data. Engineering Structures, 30 (11). 3219 - 3227. ISSN 0141-0296 (doi:10.1016/j.engstruct.2008.04.038)

Chen, Hua-Peng (2006) Efficient methods for determining modal parameters of dynamic structures with large modifications. Journal of Sound and Vibration, 298 (1-2). pp. 462-470. ISSN 0022-460X (doi:10.1016/j.jsv.2006.06.002)

Chen, Hua-Peng and Bicanic, Nenad (2010) Identification of structural damage in buildings using iterative procedure and regularisation method. Engineering Computations, 27 (8). pp. 930-950. ISSN 0264-4401 (doi:10.1108/02644401011082962)

Chen, Hua-Peng and Huang, Tian-Li (2012) Updating finite element model using dynamic perturbation method and regularization algorithm. Smart Structures and Systems, 10 (4). pp. 427-442. ISSN 1738-1584

Chen, Li Choo (2007) Optimisation of rule-based testing for scheduling within a distributed computing environment. PhD thesis, University of Greenwich.

Chen, Y., Hu, L., Yuen, C., Zhang, Y., Zhang, Z. and Rapajic, P. (2009) Intrinsic measure of diversity gains in generalised distributed antenna systems with cooperative users. IET Communications, 3 (2). pp. 209-222. ISSN 1751-8628 (Print), 1751-8636 (Online) (doi:10.1049/iet-com:20080064)

Chen, Y. and Rapajic, P. (2010) Ultra-wideband cognitive interrogator network: Adaptive illumination with active sensors for target localisation. Communications, IET, 4 (5). pp. 573-584. ISSN 1751 8628 (doi:10.1049/iet-com.2009.0495)

Chen, Y., Zhang, Z., Hu, L. and Rapajic, P.B. (2009) Geometry-based statistical model for radio propagation in rectangular office buildings. Progress In Electromagnetics Research B, 17. pp. 187-212. ISSN 1937-6472 (doi:10.2528/PIERB09080603)

Chen, Yifan, Craddock, I.J. and Kosmas, P. (2010) Feasibility study of lesion classification via contrast-agent-aided UWB breast imaging. IEEE Transactions on Biomedical Engineering, 57 (5). pp. 1003-1007. ISSN 0018-9294 (doi:10.1109/TBME.2009.2038788)

Chen, Yifan, Craddock, I.J., Kosmas, P., Ghavami, M. and Rapajic, P. (2010) Multiple-input multiple-output radar for lesion classification in ultrawideband breast imaging. IEEE Journal of Selected Topics in Signal Processing, 4 (1). pp. 187-201. ISSN 1932-4553 (doi:10.1109/JSTSP.2009.2038975)

Chen, Yifan and Rapajic, P. (2009) Novel channel description method for decentralized wireless relay networks. In: Microwave Conference 2009. Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ, USA, pp. 2164-2167. ISBN 978-1-4244-2802-1 (e-ISBN), 978-1-4244-2801-4 (print) (doi:10.1109/APMC.2009.5385513)

Chen, Yifan and Rapajic, Predrag (2010) Decentralized wireless relay network channel modeling: An analogous approach to mobile radio channel characterization. IEEE Transactions on Communications, 58 (2). pp. 467-473. ISSN 0090-6778 (doi:10.1109/TCOMM.2010.02.080315)

Chen, Yifan, Teo, Jianqi, Lai, Joshua, Gunawan, Erry, Low, Kaysoon, Soh, Cheongboon and Rapajic, Predrag (2008) Cooperative UWB body area networking: channel measurement and diversity analysis. In: 2008 IEEE 10th International symposium on spread spectrum techniques and applications. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc, Piscataway, NJ, USA, pp. 303-308. ISBN 9781424422036 (doi:10.1109/ISSSTA.2008.61)

Chen, Yifan, Teo, Jianqi, Lai, Joshua Chong Yue, Gunawan, Erry, Low, Kay Soon, Soh, Cheong Boon and Rapajic, Predrag B. (2009) Cooperative communications in ultra-wideband wireless body area networks: channel modeling and system diversity analysis. IEEE Journal on Selected Areas in Communications, 27 (1). pp. 5-16. ISSN 0733-8716 (doi:10.1109/JSAC.2009.090102)

Chen, Yifan and Woo, Wai Lok (2010) On modeling of cognitive interrogator-sensor network: Layered discrete memoryless channel and finite-state Markov channel. In: 2nd International Workshop on Cognitive Information Processing (CIP), 2010. 2nd International Workshop on Cognitive Information Processing (CIP), 2010 . IEEE Xplore Digital Library, Elba, pp. 11-16. ISBN 978-1-4244-6457-9 (print) ISSN 2150 4938 (online) (doi:10.1109/CIP.2010.5604122)

Chen, Yifan, Yuen, Chau, Zhang, Yan and Zhang, Zhenrong (2007) Diversity gains of generalised distributed antenna systems with cooperative users. In: 2007 IEEE Wireless Communications & Networking Conference. IEEE Explore, Piscataway, NJ, USA, pp. 797-802. ISBN 1424406587 (doi:10.1109/WCNC.2007.152)

Cheung, W.M., Matthews, P.C., Gao, James and Maropoulos, Paul G. (2008) Advanced product development integration architecture: an out-of-box solution to support distributed production networks. International Journal of Production Research, 46 (12). pp. 3185-3206. ISSN 0020-7543 (doi:10.1080/00207540601039767)

Chi, Xuesong (2008) A web-based intelligent learning environment for the teaching of industrial continuous quality improvement. PhD thesis, University of Greenwich.

Christakis, Nicholas, Chapelle, Pierre, Strusevitch, Nadia, Bridle, Ian, Baxter, John, Patel, Mayur, Cross, Mark, Tüzün, Ugur, Reed, Alan R. and Bradley, Michael S.A. (2006) A hybrid numerical model for predicting segregation during core flow discharge. Advanced Powder Technology, 17 (6). pp. 641-662. ISSN 0921-8831 (doi:10.1163/156855206778917715)

Christakis, N., Wang, J., Patel, M.K., Bradley, M.S.A., Leaper, M.C. and Cross, M. (2006) Aggregation and caking processes of granular materials: continuum model and numerical simulation with application to sugar. Advanced Powder Technology, 17 (5). pp. 543-565. ISSN 0921-8831 (doi:10.1163/156855206778440480)

Christopher, C.J., James, M.N., Patterson, E.A. and Tee, Kong-Fah (2008) A quantitative evaluation of fatigue crack shielding forces using photoelasticity. Engineering Fracture Mechanics, 75 (14). pp. 4190-4199. ISSN 0013-7944 (doi:10.1016/j.engfracmech.2008.03.013)

Christopher, C.J., James, M.N., Tee, Kong-Fah and Patterson, E.A. (2008) Evaluation of crack tip shielding using a photoelastic model. In: the SEM XI International Congress on Experimental and Applied Mechanics, 2-5 June 2008, Orlando, FL, USA, .

Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2008) Knowledge reuse in manufacturability analysis. Robotics and Computer Integrated Manufacturing, 24 (4). pp. 508-513. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.003)

Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James, Dani, Shilpa and Baxter, David (2009) Manufacturing knowledge verification in design support systems. International Journal of Production Research, 47 (12). pp. 3179-3204. ISSN 0020-7543 (Print), 1366–588X (Online) (doi:10.1080/00207540701802452)

Coutroubis, Alec and Beams, Rodney (2007) The use of computer based training (CBT) in the training of marine engineers. In: LMA 9th International Conference Maritime Transport and Infrastructure-2007, 19-20 April 2007, Riga, Latvia. (Unpublished)

D

Deng, Tong, Bingley, Mark S. and Bradley, Michael S.A. (2004) The influence of particle rotation on the solid particle erosion rate of metals. Wear, 256 (11-12). pp. 1037-1049. ISSN 0043-1648 (doi:10.1016/S0043-1648(03)00536-2)

Deng, Tong, Bradley, Michael S.A., Berry, Rob and Kostuch, J. (2008) Caking strength of granulated clay under frozen conditions. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 604-609. ISBN 9788272062896

Deng, Tong, Farnish, Richard J. and Bradley, Michael S.A. (2008) Evaluation of particle degradation due to high-speed impacts in a pneumatic handling system. Particulate Science and Technology, 26 (5). pp. 438-450. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:10.1080/02726350802367522)

Deng, T., Bingley, M.S., Bradley, M.S.A. and De Silva, S.R. (2008) A comparison of the gas-blast and centrifugal-accelerator erosion testers: the influence of particle dynamics. Wear, 265 (7-8). pp. 945-955. ISSN 0043-1648 (doi:10.1016/j.wear.2008.02.017)

Deng, T., Su, J.W., Zhang, Y., Bradley, M.S.A. and Wei, X.L. (2011) Making coal/biomass pellets for co-firing - a review and pioneer work. In: Proceedings of the Bioten Conference on Biomass Bioenergy and Biofuels 2010. CPL Press, Newbury, UK. ISBN 9781872691541

Deng, Tong, Bingley, Mark S. and Bradley, Mike S.A. (2009) Understanding particle dynamics in erosion testers: a review of influences of particle movement on erosion test conditions. Wear, 267 (11). pp. 2132-2140. ISSN 0043-1648 (doi:10.1016/j.wear.2009.02.020)

Deng, Tong, Paul, Kirsty A., Bradley, Michael S.A., Immins, Lee, Preston, Chris, Scott, Jerry F. and Welfare, Eloise H. (2010) Investigations on air induced segregation of pharmaceutical powders and effect of material flow functions. Powder Technology, 203 (2). pp. 354-358. ISSN 0032-5910 (doi:10.1016/j.powtec.2010.05.028)

Dickinger, Astrid, Arami, Mitra and Meyer, David (2006) Reconsidering the adoption process: enjoyment and social norms — antecedents of hedonic mobile technology use. In: Proceedings of the 39th Annual Hawaii International Conference on System Sciences, 2006. IEEE Xplore, Piscataway, NJ, USA, 23a-23a. ISBN 0-7695-2507-5 ISSN 1530-1605 (doi:10.1109/HICSS.2006.410)

Dobson, R., Wu, R. and Callaghan, P. (2012) Blood glucose monitoring using microwave cavity perturbation. Electronics Letters, 48 (15). pp. 905-906. ISSN 0013-5194 (doi:10.1049/el.2012.1811)

Doultsinou, Athanasia, Roy, Rajkumar, Baxter, David and Gao, James (2008) Key service issues in two UK manufacturing companies from a PSS perspective. In: Proceedings of the Cranfield Multi-Strand Conference: Creating Wealth Through Research and Innovation (CMC 2008): 6-7 May 2008. Cranfield University Press, Cranfield University, pp. 287-292. ISBN 9780955743672

Doultsinou, Athanasia, Roy, Rajkumar, Baxter, David, Gao, James and Mann, Andy (2009) Developing a service knowledge reuse framework for engineering design. Journal of Engineering Design, 20 (4). pp. 389-411. ISSN 0954-4828 (Print), 1466-1837 (Online) (doi:10.1080/09544820903149354)

Durairaj, Rajkumar, Ekere, Ndy, Salam, B., Jackson, G. and He, Da (2003) Monte Carlo study of solder paste microstructure and ultra-fine-pitch stencil printing. Journal of Materials Science: Materials in Electronics, 14 (8). pp. 501-506. ISSN 0957-4522 (doi:10.1023/A:1023929119055)

Durairaj, Rajkumar, Mallik, Sabuj and Ekere, Ndy (2008) Solder paste characterisation: towards the development of quality control (QC) tool. Soldering & Surface Mount Technology, 20 (3). pp. 34-40. ISSN 0954-0911 (doi:10.1108/09540910810885705)

Durairaj, Rajkumar, Mallik, Sabuj, Seman, Anton, Marks, Antony and Ekere, Ndy (2008) Investigation of wall-slip effect on paste release characteristic in flip-chip stencil printing process. In: 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1328-1333. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763615)

Durairaj, Rajkumar, Man, Lam Wai, Mallik, Sabuj and Ekere, Ndy (2009) Thixotropic studies of lead-based solder, lead-free solder and conductive adhesive pastes. In: 11th Electronic Material and Packaging Conference (EMAP), 1-3 Dec 2009, Penang, Malaysia. (Unpublished)

Durairaj, R., Mallik, S., Seman, A., Marks, A. and Ekere, N.N. (2009) Rheological characterisation of solder pastes and isotropic conductive adhesives used for flip-chip assembly. Journal of Materials Processing Technology, 209 (8). pp. 3923-3930. ISSN 0924-0136 (doi:10.1016/j.jmatprotec.2008.09.013)

Durairaj, R., Mallik, S., Seman, A., Marks, A. and Ekere, N.N. (2008) Viscoelastic properties of solder paste and isotropic conductive adhesives used for flip-chip assembly. In: Electronic Manufacturing Technology Symposium (IEMT), 2008 33rd IEEE/CPMT International. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 1-8. ISBN 9781424433926 (print), 9781424433933 (electronic) ISSN 1089-8190 (doi:10.1109/IEMT.2008.5507801)

Durairaj, R., Man, Lam Wai, Ekere, N.N. and Mallik, S. (2010) The effect of wall-slip formation on the rheological behaviour of lead-free solder pastes. Materials and Design, 31 (3). pp. 1056-1062. ISSN 0261-3069 (doi:10.1016/j.matdes.2009.09.051)

Durairaj, R., Man, Lam Wai, Ramesh, S., Wea, Lim Chia, Leng, Eu Poh, Ekere, N.N., Mallik, S. and Seman, A. (2009) Investigation of wall-slip effect on lead-free solder paste and isotropic conductive adhesives. In: Electronics Packaging Technology Conference, 2009. EPTC '09. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 422-426. ISBN 978-1-4244-5099-2 (print), 978-1-4244-5100-5 (e-ISBN) (doi:10.1109/EPTC.2009.5416511)

Durairaj, R., Ramesh, S., Mallik, S., Seman, A. and Ekere, N. (2009) Rheological characterisation and printing performance of Sn/Ag/Cu solder pastes. Materials and Design, 30 (9). pp. 3812-3818. ISSN 0261-3069 (doi:10.1016/j.matdes.2009.01.028)

Durairaj, Rajkumar (2006) Rheological characterisation of solder pastes and isotropic conductive adhesives (ICAs) for microsystems assembly technology. PhD thesis, University of Greenwich.

Durowoju, Olasunkanmi, Arshad, Kamran and Moessner, Klaus (2012) Distributed power control algorithm for cognitive radios with primary protection via spectrum sensing under user mobility. Ad Hoc Networks, 10 (5). pp. 740-751. ISSN 1570-8705 (doi:10.1016/j.adhoc.2011.02.005)

Dussaillant, A., Buytaert, W., Meier, C. and Espinoza, F. (2012) Hydrological regime of remote catchments with extreme gradients under accelerated change: the Baker basin in Patagonia. Hydrological Sciences Journal, 57 (8). pp. 1530-1542. ISSN 0262-6667 (doi:10.1080/02626667.2012.726993)

Dussaillant, Alejandro, Benito, Gerardo, Buytaert, Wouter, Carling, Paul, Meier, Claudio and Espinoza, Fabián (2010) Repeated glacial-lake outburst floods in Patagonia: An increasing hazard? Natural Hazards, 54 (2). pp. 469-481. ISSN 0921-030X (doi:10.1007/s11069-009-9479-8)

Dussaillant, Alejandro, Galdames, Pablo and Sun, Chi-Le (2009) Water level fluctuations at El Yali coastal lagoon Ramsar site, with emphasis on subsurface processes. Desalination, 246 (1-3). pp. 202-214. ISSN 0011-9164 (doi:10.1016/j.desal.2008.03.053)

Dyroy, Are (2006) Quantification and mitigation of segregation in the handling of alumina in aluminium production. PhD thesis, University of Greenwich.

E

Eadie, R. and Gao, James (2008) An industrial implementation of a methodology for the optimisation of product design tolerances. In: Advances in manufacturing technology XXII: the proceedings of the 6th International Conference on Manufacturing Research ICMR08, 9th-11th September 2008, London UK. Brunel University College, Brunel University, pp. 161-170. ISBN 9781902316604

Ekere, Ndy, Durairaj, Rajkumar, Mallik, Sabuj, Marks, Antony, Bauer, R. and Winter, M. (2006) Rheological characterisation of new lead-free solder paste formulations for flip-chip assembly. In: ESTC 2006: 1st Electronics Systemintegration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, pp. 995-1000. ISBN 1424405521 (doi:10.1109/ESTC.2006.280132)

Ekere, Ndy, Durairaj, Rajkumar, Mallik, Sabuj and Seman, Anton (2009) Investigation of wall-slip behaviour in lead-free solder pastes and isotropic conductive adhesives. Sadhana - Academy Proceedings in Engineering Sciences, 34 (5). pp. 1-12. ISSN 0256-2499 (Print) 0973-7677 (Online) (doi:10.1007/s12046-009-0046-5)

Ekere, Ndy and Mallik, Sabuj (2008) A methodology for characterising new lead-free solder paste formulations used for flip-chip assembly applications. In: Smart processing technology: SPT '07. High Temperature Society of Japan, Ibaraki, Japan, pp. 59-64.

Ekere, Ndy, Mallik, Sabuj, Durairaj, Rajkumar and Marks, Antony (2007) A study of the rheological properties of lead free solder paste formulations used for flip-chip interconnection. In: 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. IEEE/CPM International Electronics Manufacturing Technology Symposium . IEEE, New York, USA, pp. 165-171. ISBN 9781424413355 (doi:10.1109/IEMT.2007.4417065)

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2007) Effect of abandon time on print quality and rheological characteristics for lead-free solder pastes used for flip-chip assembly. In: 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. Ieee/Cpmt International Electronics Manufacturing Technology Symposium . Institute of Electrical and Electronics Engineers , New York, USA, pp. 14-19. ISBN 9781424413355 (doi:10.1109/IEMT.2007.4417048)

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2008) Effect of long-term aging on the rheological characteristics and printing performance of lead-free solder pastes used for flip-chip assembly. Smart Processing Technology, 2. pp. 131-134.

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy and Mallik, Sabuj (2011) Advanced thermal management materials for heat sinks used in microelectronics. In: EMPC-2011: 18th European Microelectronics and Packaging Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-8. ISBN 9781467306942

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy, Mallik, Sabuj, Amalu, Emeka and Otiaba, Kenny (2011) Investigation of effects of heat sinks on thermal performance of microelectronic package. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 127-132. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145164)

Eneh, T., Rapajic, P. and Anang, K. (2011) Adaptive MMSE multiuser receivers in MIMO OFDM wireless communication. In: Communication Technology (ICCT), 2010 12th IEEE International Conference on. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 934-937. ISBN 978-1-4244-6868-3 (doi:10.1109/ICCT.2010.5688544)

Eneh, T., Rapajic, P., Anang, K., Bakalis, P. and Bello, L. (2012) Information capacity of adaptive MIMO OFDM wireless communication systems. In: Adaptive Science and Technology (ICAST). Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 157-164. ISBN 978-1-4673-0758-1 (doi:10.1109/ICASTech.2011.6145168)

Eneh, T., Rapajic, P., Anang, K.A. and Bello, Lawal (2012) Adaptive MMSE Multiuser Detection in MIMO OFDM wireless communication system. In: Advanced Materials Research. Scientific Net, pp. 233-240. ISBN 978-3-03785-270-5 ISSN 1662-8985 (doi:10.4028/www.scientific.net/AMR.367.233)

Eneh, T., Rapajic, P., Oletu, G., Anang, K. and Bello, L. (2011) Adaptive MMSE multiuser detection for MIMO OFDM over turbo-equalization for single-carrier transmission wireless channel. In: IWCMC 2011 - 7th International Wireless Communications and Mobile Computing Conference. IEEE Computer Society, Piscataway, USA, pp. 1408-1412. ISBN 9781424495399 (doi:10.1109/IWCMC.2011.5982744)

Eneh, Titus, Oletu, Grace, Anang, Kwashie, Rapajic, Predrag and Eze, J.U. (2011) Adaptive vector precoding for multiuser MIMO OFDM. In: International Conference on ICT for Africa 2011 (ICT4Africa 2011) , 23-26 March 2011, Covenant University, Otta, Nigeria. (Submitted)

Eneh, Titus, Rapajic, Predrag, Anang, Kwashie, Bello, L. and Qureshi, Athar (2010) Information capacity of the communications systems with adaptive MMSE receivers. In: International Conference On Future Information Technology (ICFIT 2010), 14-15 Dec 2010, Changsha, Hunan, China.

Eneh, Titus Ikechukwu (2011) Adaptive MMSE multiuser receivers in MIMO OFDM wireless communication systems. PhD thesis, University of Greenwich.

Eneh, Titus Ikechukwu, Oletu, Grace, Rapajic, Predrag, Anang, Kwashie and Bello, Lawal (2011) Adaptive multiuser receivers scheme for MIMO OFDM over iterative-equalization for single-carrier transmission. Journal of Emerging Trends in Engineering and Applied Sciences (JETEAS), 2 (2). pp. 282-288. ISSN 2141-7016

Ermis, Ertan, Farnish, Richard J., Berry, Rob and Bradley, Michael S.A. (2008) Direct measurement of powder flavour adhesion on to a food surface using a novel adhesion tester. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 803-810. ISBN 9788272062896

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2011) Centrifugal tester versus a novel design to measure particle adhesion strength and investigation of effect of physical characteristics (size, shape, density) of food particles on food surfaces. Journal of Food Engineering, 104 (4). pp. 518-524. ISSN 0260-8774 (doi:10.1016/j.jfoodeng.2011.01.008)

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2009) Direct measurement of powder flavor adhesion onto crisp surface using a novel adhesion tester. Particulate Science and Technology, 27 (4). pp. 362-372. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:10.1080/02726350902994035)

Ermis, Ertan (2011) Establishment of a repeatable test procedure for measuring adhesion strength of particulates in contact with surfaces. PhD thesis, University of Greenwich.

F

Falconer, Robert E., Boughton, B. and Paterson, F. (2010) Strengthening of masonry bridges against traffic and flooding. In: Structural Faults and Repair 2010 13th International Congress and Exhibition, 15-17 June 2010, Edinburgh.

Faramarzi, Asaad, Javadi, Akbar and Ahangar-Asr, Alireza (2013) Numerical implementation of EPR-based material models in finite element analysis. Computers and Structures, 118. pp. 100-108. ISSN 0045-7949 (doi:10.1016/j.compstruc.2012.10.002)

Faramarzi, Asaad, Javadi, Akbar A. and Alani, Amir M. (2012) EPR-based material modelling of soils considering volume changes. Computers & Geosciences, 48. pp. 73-85. ISSN 0098-3004 (doi:10.1016/j.cageo.2012.05.015)

Farnish, Richard J. (2008) Fine in the lab not equal fine for the process. The Chemical Engineer (802). pp. 36-37. ISSN 0302-0797

Farnish, Richard J., Kulkarni, Prasanna and Bradley, Michael S.A. (2008) Segregation of bulk particulates through multiple process handling steps. In: Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 505-510. ISBN 9788272062896

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2011) Testing of powders for sensitivity to air effect segregation. Powder Metallurgy, 54 (4). pp. 468-470. ISSN 0032-5899 (Print), 1743-2901 (Online) (doi:10.1179/174329011X13073642060730)

Farnish, Richard (2010) Tackling powder handling problems. Industrial Minerals. pp. 59-60.

Fei, Genyuan (2011) A methodology for engineering design change analysis using system modelling and knowledge management technologies. PhD thesis, University of Greenwich.

Fei, Genyuan, Gao, James, Owodunni, Oladele and Tang, X. (2011) A model-driven and knowledge-based methodology for engineering design change management. Computer-Aided Design and Applications, 8 (3). pp. 373-382. ISSN 1686-4360 (doi:10.3722/cadaps.2011.373-382)

Fei, Genyuan, Gao, James, Owodunni, Oladele and Tang, X. Q. (2009) A methodology for engineering design change management using modelling and problem solving techniques. In: Proceedings of the 36th International MATADOR Conference. Springer, US, pp. 179-182. ISBN 978-1-84996-432-6_41 (doi:10.1007/978-1-84996-432-6_41)

Fei, Genyuan, Gao, James, Owodunni, Oladele and Tang, Xiaoqing (2011) A method for engineering design change analysis using system modelling and knowledge management techniques. International Journal of Computer Integrated Manufacturing, 24 (6). pp. 535-551. ISSN 1362-3052 (electronic), 0951-192X (paper) (doi:10.1080/0951192X.2011.562544)

Ferdowsi, Mohsen, Grau Unda, Iñaki, Karfopoulos, Evangelos, Papadopoulos, Panagiotis, Skarvelis-Kazakos, Spyros, Cipcigan, Liana, Raab, Andreas F., Dimeas, Aris, Abbasi, Ehsan and Strunz, Kai (2010) Controls and EV aggregation for virtual power plants. Project Report. MERGE.

G

Gandhi Jeyaraj, S. and Habtay, Yehdego (2011) Effective and efficient circuit breaker analysis. IET 2011 Conference on Reliability of Transmission and Distribution Networks (RTDN 2011). pp. 1-6. (doi:10.1049/cp.2011.0532)

Gao, James and Baxter, David (2008) Editorial for the special issue of RCIM for ICMR2005: Third International Conference on Manufacturing Research, Cranfield University, September 6th–9th 2005, Cranfield, UK. Robotics and Computer-Integrated Manufacturing, 24 (4). pp. 499-500. ISSN 0736-5845 (doi:10.1016/j.rcim.2007.07.001)

Gao, James and Baxter, David (2007) Enabling technologies and frameworks for new product development: a selection of papers from ICMR2005. International Journal of Production Research, 45 (7). pp. 1485-1487. ISSN 0020-7543 (doi:10.1080/00207540600942201)

Gao, James, Baxter, David, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2007) An engineering design knowledge reuse methodology using process modelling. Research in Engineering Design, 18 (1). pp. 37-48. ISSN 0934-9839 (doi:10.1007/s00163-007-0028-8)

Gao, James, Baxter, David, Doultsinou, Nancy and Roy, Rajkumar (2007) Identification of service knowledge types for technical product-service systems. In: Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath, pp. 549-555.

Gao, James, Baxter, David and Roy, Rajkumar (2009) Managing knowledge within the manufacturing enterprise: an overview. International Journal of Manufacturing Technology and Management (IJMTM), 18 (2). pp. 183-209. ISSN 1368-2148 (doi:10.1504/IJMTM.2009.026193)

Gao, James and Bradfield, Daniel J. (2007) A methodology to facilitate knowledge sharing in the new product development process. International Journal of Production Research, 45 (7). pp. 1489-1504. ISSN 0020-7543 (doi:10.1080/00207540600942227)

Gao, James, Bradfield, Daniel J. and Soltan, Hossein (2007) Development of a tool to support the dissemination of information about knowledge in multilingual product development teams. In: Proceedings of the International conference on product lifecycle management: assessing the industrial relevance. Inderscience Enterprises Ltd, Genva Aeroport, pp. 261-270. ISBN 9780907776321

Gao, James, Bradfield, Daniel J. and Soltan, Hossein (2007) A metaknowledge approach to facilitate knowledge sharing in the global product development process. Computer-Aided Design and Applications, 4 (1-4). pp. 519-528. ISSN 1686-4360 (doi:10.3722/cadaps.2007.519-528)

Gao, James, Fei, Genyuan and Tang, X.Q. (2009) A TRIZ based methodology for the analysis of the coupling problems in complex engineering design. In: Proceedings of the 19th CIRP Design Conference – Competitive Design, 30-31 March 2009. Cranfield University Press, Cranfield University, pp. 285-292. ISBN 9780955743641

Gao, James and Jian, Amanda (2007) A multi-agent based knowledge search methodology for product development. In: Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.

Gao, James and Kuang, Li (2007) A framework to integrate manufacturing information systems. In: Digital enterprise technology perspectives and future challenges. Springer, New York, pp. 369-376. ISBN 9780387498638 (doi:10.1007/978-0-387-49864-5)

Gao, James and Sharma , R. (2007) A knowledge-based manufacturing and cost evaluation system for product design/re-design. The International Journal of Advanced Manufacturing Technology, 33 (9-10). pp. 856-865. ISSN 0268-3768 (doi:10.1007/s00170-006-0530-6)

Gao, James, Zhang, Pengcheng, Baxter, David and Kalta, Mo (2007) Developing a design process model for the reuse of knowledge. In: Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.

Gao, James, Cheung, W.M., Bramall, D.G., Maropoulos, Paul G. and Aziz, Hayder (2006) Organizational knowledge encapsulation and re-use in collaborative product development. International Journal of Computer Integrated Manufacturing, 19 (7). pp. 736-750. ISSN 0951-192X (doi:10.1080/09511920500504479)

Goodfellow, N., Nadjai, A., Tee, Kong-Fah, Ali, F. and Choi, S.K (2009) Fire composite floor cellular steel beams for buildings. In: The International Conference on Applications of Structural Fire Engineering, 19-20 February 19-20 2009, Prague, Czech Republic.

Grau, I., Skarvelis-Kazakos, S., Papadopoulos, P., Cipcigan, L.M. and Jenkins, N. (2010) Electric vehicles support for intentional islanding: A prediction for 2030. In: 41st North American Power Symposium. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, pp. 1-5. ISBN 978-1-4244-4428-1 (Print), 978-1-4244-4429-8 (Online) (doi:10.1109/NAPS.2009.5484016)

Grau Unda, I., Papadopoulos, P., Skarvelis-Kazakos, S., Cipcigan, L.M. and Jenkins, N. (2011) Energy storage for balancing a local distribution network area. In: Energy Storage in the Emerging Era of Smart Grids. InTech, New York, USA, pp. 301-320. ISBN 978-953-307-269-2 (doi:10.5772/18305)

H

Hamadani, Ehsan and Rakocevic, Veselin (2007) TCP Contention Control: a cross layer approach to improve TCP performance in multihop ad hoc networks. In: Wired/Wireless Internet Communications: 5th International Conference, WWIC 2007, Coimbra, Portugal, May 23-25, 2007. Proceedings. Lecture Notes in Computer Science (4517). Springer, Berlin / Heidelberg, pp. 1-16. ISBN 978-3-540-72694-4 (doi:10.1007/978-3-540-72697-5_1)

Harireche, Ouahid, Verdin, Patrick, Thompson, Chris P. and Hammond, David W. (2008) Explicit finite volume modeling of aircraft anti-icing and de-icing. Journal of Aircraft, 45 (6). pp. 1924-1936. ISSN 0021-8669 (doi:10.2514/1.34855)

Hettiaratchi, Kaushika (2006) A comparison between the pressure gradients in vertical and horizontal pneumatic conveying, with an investigation into the effect of pipeline bore in vertical conveying. PhD thesis, University of Greenwich.

Hinduja, S., Mansor, M.S.A. and Owodunni, O.O. (2010) Voronoi-diagram-based linking of contour-parallel tool paths for two-and-a-half-dimensional closed-pocket machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (9). pp. 1329-1350. ISSN 0954-4054 (Print), 2041-2975 (Online) (doi:10.1243/09544054JEM1596)

Hossain, M., Wu, Ruiheng, Litchfield, Charan and Rapajic, Predrag (2008) Linearization of high frequency amplifier using a generalised signal-injection method: case study. In: Analog Signal Processing Conference 2008 , 12 November 2008, Oxford Brookes University, Oxford, UK. (Unpublished)

Hu, Luo-quan, Zhu, Hong-bo and Chen, Yifan (2009) Probability distribution of stochastic rays and its applications. Journal of Electronics & Information Technology, 31 (6). pp. 1405-1409. ISSN 1009-5896 (doi:10.3724/SP.J.1146.2007.01018)

Hussain, Tariq, Kaialy, Waseem, Deng, Tong, Bradley, Mike S.A., Nokhodchi, Ali and Armour-Chélu, David (2013) Measurement of electrostatic charge on particles using a novel approach. International Journal of Pharmaceutics, 441 (1-2). pp. 781-789. ISSN 0378-5173 (doi:10.1016/j.ijpharm.2012.10.002)

J

James, M.N., Christopher, C.J., Lu, Yanwei, Tee, K.F. and Patterson, E.A. (2011) Crack tip shielding from a plastic 'inclusion'. Key Engineering Materials , 465 (1). pp. 1-8. ISSN 1662-9795 (doi:10.4028/www.scientific.net/KEM.465.1)

Javadi, A.A., Ahangar-Asr, A., Johari, A., Faramarzi, A. and Toll, D. (2012) Modelling stress-strain and volume change behaviour of unsaturated soils using an evolutionary based data mining technique, an incremental approach. Engineering Applications of Artificial Intelligence, 25 (5). pp. 926-933. ISSN 0952-1976 (doi:10.1016/j.engappai.2012.03.006)

Javadi, Akbar A., Ahangar-Asr, Alireza, Faramarzi, Asaad and Mottaghifard, Nasim (2012) An EPR approach to the modeling of civil and geotechnical engineering systems. In: Metaheuristics in Water, Geotechnical and Transport Engineering. Elsevier Inc., Waltham, MA, USA, pp. 311-326. ISBN 978-0-12-398296-4 (doi:10.1016/B978-0-12-398296-4.00013-1)

Javadi, Akbar A., Faramarzi, Asaad and Ahangar-Asr, Alireza (2012) Analysis of behaviour of soils under cyclic loading using EPR-based finite element method. Finite Elements in Analysis and Design, 58. pp. 53-65. ISSN 0168-874X (doi:10.1016/j.finel.2012.04.005)

Javadi, Akbar A., Faramarzi, Asaad and Alani, Amir (2012) Intelligent computational solutions for constitutive modelling of materials in finite element analysis. In: ACME2012: Proceedings of the 20th UK National Conference of the Association for Computational Mechanics in Engineering. The University of Manchester, Manchester, UK, pp. 321-324. ISBN 978-0-903808-06-4

Javadi, Akbar A., Faramarzi, Asaad and Farmanai, Raziyeh (2012) Design and optimization of microstructure of auxetic materials. Engineering Computations, 29 (3). pp. 260-276. ISSN 0264-4401 (doi:10.1108/02644401211212398)

Javadi, Akbar A., Mehravar, Moura, Faramarzi, Asaad and Ahangar-Asr, Alireza (2009) An artificial intelligence based finite element method. ISAST Transactions on Computers and Intelligent Systems, 1 (2). pp. 1-7. ISSN 1798-2448

Jian, Guo, Gao, James and Wang, Yinglin (2010) A multi-agent based knowledge search framework to support the product development process. International Journal of Computer Integrated Manufacturing, 23 (3). pp. 237-247. ISSN 0951-192X (doi:10.1080/09511920903529222)

Jian, Guo (2011) Knowledge search for new product development: a multi-agent based methodology. PhD thesis, University of Greenwich.

Jones, Mark G. (1988) The influence of bulk particulate properties on pneumatic conveying performance. PhD thesis, Thames Polytechnic.

K

Kanakis, T., Litchfield, C. and Rapajic, P. (2009) Adaptive virtual relaying MIMO decode and forward. In: Wireless Communications & Signal Processing. Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ, USA, pp. 1-5. ISBN 978-1-4244-5668-0 (electronic), 978-1-4244-4856-2 (print) (doi:10.1109/WCSP.2009.5371515)

Kanakis, Triantafyllos and Rapajic, Predrag B. (2008) Radio propagation modeling for capacity optimization in wireless relay MIMO systems with partial CSI. In: 2008 IEEE 10th International symposium on spread spectrum techniques and applications. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 211-215. ISBN 9781424422036 (doi:10.1109/ISSSTA.2008.44)

Kao, A. and Pericleous, K. (2012) The effect of secondary arm growth on thermoelectric magnetohydrodynamics. Magnetohydrodynamics, 48 (2). pp. 361-370. ISSN 0024-998X

Karfopoulos, Evangelos L., Papadopoulos, Panagiotis, Skarvelis-Kazakos, Spyros, Grau, Inaki, Cipcigan, Liana M., Hatziargyriou, Nikos and Jenkins, Nick (2011) Introducing electric vehicles in the microgrids concept. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082212)

Kessel, Stephen Ronald (1985) The interaction between rotary valves and pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

Khan, Naushad Salim (2008) Handling characteristics of coal/biomass mixes: measurements and establishing benchmarks. PhD thesis, University of Greenwich.

Khan, Noor M., Simsim, Mohammed T. and Rapajic, Predrag B. (2008) A generalized model for the spatial characteristics of the cellular mobile channel. IEEE Transactions on Vehicular Technology, 57 (1). pp. 22-37. ISSN 0018-9545 (doi:10.1109/TVT.2007.904532)

Khosrowshahi, Farzad and Alani, Amir (2011) Visualisation of impact of time on the internal lighting of a building. Automation in Construction, 20 (2). pp. 145-154. ISSN 0926-5805 (Print) (doi:10.1016/j.autcon.2010.09.012)

Kilic, Gokhan (2012) Application of advanced non-destructive testing methods on bridge health assessment and analysis. PhD thesis, University of Greenwich.

Kofinas, Alexander and Saur-Amaral, Irina (2008) 25 years of knowledge creation processes in pharmaceutical contemporary trends. Comportamento Organizacional e Gestão (COeG), 14 (2). pp. 257-280. ISSN 0872-9662 (print)

Kosmas, P., Laranjeira, S., Dixon, J.H., Li, X. and Chen, Y. (2010) Time reversal microwave breast imaging for contrast-enhanced tumor classification. In: Engineering in Medicine and Biology Society (EMBC), 2010 Annual International Conference of the IEEE. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 708-711. ISBN 978-1-4244-4123-5 (print) ISSN 1557-170X (online) (doi:10.1109/IEMBS.2010.5626158)

Koufopoulos, Dimitrios N., Coutroubis, Alec and Lagoudis, Ioannis N. (2007) One size does not fit all: revisiting conceptual wisdom by assessing corporate governance practices of the Greek shipping management companies. In: International Association of Maritime Economists, IAME, Greece Challenges and Trends in Shipping, Markets, Investments and Policies, 4-6 July 2007, Athens. (Unpublished)

Krabicka, Jan and Lu, Gang (2009) Visualisation and characterisation of flame radical emissions through intensified spectroscopic imaging. In: Sensors & their Applications XV. Journal of Physics: Conference Series, 178 (1). IOP Publishing, Bristol, UK. ISSN 1742-6588 (Print), 1742-6596 (Online) (doi:10.1088/1742-6596/178/1/012041)

Krabicka, Jan and Lu, Gang (2010) A spectroscopic imaging system for flame radical profiling. In: IEEE Instrumentation and Measurement Technology Conference (I2MTC), 2010. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 1387-1391. ISBN 978-1-4244-2832-8 ISSN 978-1-4244-2832-8 (doi:10.1109/IMTC.2010.5488056)

Krabicka, Jan, Lu, Gang and Yan, Yong (2011) Profiling and characterization of flame radicals by combining spectroscopic imaging and neural network techniques. IEEE Transactions on Instrumentation and Measurement, 60 (5). pp. 1854-1860. ISSN 0018-9456 (doi:10.1109/TIM.2010.2102411)

Krabicka, Jan and Yan, Yong (2009) Finite-element modeling of electrostatic sensors for the flow measurement of particles in pneumatic pipelines. IEEE Transactions on Instrumentation and Measurement, 58 (8). pp. 2730-2736. ISSN 0018-9456 (doi:10.1109/TIM.2009.2016288)

Krabicka, Jan and Yan, Yong (2009) Optimised design of intrusive electrostatic sensors for the velocity measurement of pneumatically conveyed particles. In: IEEE Instrumentation and Measurement Technology Conference, 2009. I2MTC '09. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 341-345. ISBN 978-1-4244-3352-0 ISSN 1091-5281 (doi:10.1109/IMTC.2009.5168472)

Krasevac, Zarko B. and Rapajic, Predrag B. (2008) Adaptive AR channel model identification of time-varying communication systems. In: 2008 IEEE 10th International symposium on spread spectrum techniques and applications. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 618-622. ISBN 9781424422036 (doi:10.1109/ISSSTA.2008.121)

Krusevac, Snezana M., Rapajic, Predrag and Kennedy, Rodney A. (2006) Mutual coupling effect on thermal noise in multi-element antenna systems. Progress in Electromagnetics Research, 59. pp. 325-333. ISSN 1070-4698 (doi:10.2528/PIER05091103)

Krusevac, Zarko B., Rapajic, Predrag and Kennedy, Rodney A. (2008) Mutual information performance of differential MPSK detection over time-varying channels. In: Proceedings - 2008 IEEE International Symposium on Information Theory, ISIT 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 2752-2756. ISBN 9781424422562

Krusevac, Z.B., Rapajic, P.B. and Kennedy, R.A. (2008) Communication system model for information rate evaluation of differential detection over time-varying channels. IET Communications, 2 (10). pp. 1301-1310. ISSN 1751-8628 (doi:10.1049/iet-com:20070610)

Kulkarni, P.A., Berry, R.J. and Bradley, M.S.A. (2010) Review of the flowability measuring techniques for powder metallurgy industry. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 224 (3). pp. 159-168. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/09544089JPME299)

L

Lamahewa, Tharaka A., Sadeghi, Parastoo, Kennedy, Rodney A. and Rapajic, Predrag B. (2009) Model-based pilot and data power adaptation in psam with periodic delayed feedback. IEEE Transactions on Wireless Communications, 8 (5). pp. 2247-2252. ISSN 1536-1276 (doi:10.1109/TWC.2009.080526)

Le, C.H., Okereke, M.I., Nguyen, V.H., Dao, V.D., Soe, S., Zlatov, N. and Le, T.H. (2011) Personalised medical product development: Methods, challenges and opportunities. Romanian Review Precision Mechanics, Optics and Mechatronics, 40. pp. 11-20. ISSN 1584-5982

Leaper, M.C., Bradley, Michael S.A., Cleaver, J.A.S., Bridle, Ian, Reed, Alan R., Abou-Chakra, H. and Tüzün, Ugur (2002) Constructing an engineering model for moisture migration in bulk solids as a prelude to predicting moisture migration caking. Advanced Powder Technology, 13 (4). pp. 411-424. (doi:10.1163/156855202320536043)

Li, Chun-Qing, Mackie, Robert Ian and Lawanwisut, Wimon (2007) A risk-cost optimized maintenance strategy for corrosion-affected concrete structures. Computer-Aided Civil and Infrastructure Engineering, 22 (5). pp. 335-346. ISSN 1093-9687 (doi:10.1111/j.1467-8667.2007.00490.x)

Li, Chun-Qing and Melchers , Robert E. (2009) Reinforcement corrosion initiation and activation times in concrete structures exposed to severe marine environments. Cement and Concrete Research, 39 (11). pp. 1068-1076. ISSN ISSN: 0008-8846 (doi:10.1016/j.cemconres.2009.07.003)

Li, Chun-Qing and Shao, L. (2007) Reliability based asset management strategy for concrete infrastructure. International Journal of Materials and Structural Reliability, 5 (1). pp. 13-28.

Li, Chun-Qing, Yang, Yang and Melchers, Robert E. (2008) Prediction of reinforcement corrosion in concrete and its effects on concrete cracking and strength reduction. ACI Materials Journal, 105 (1). pp. 3-10. ISSN 0889-325X

Li, Chun-Qing, Zheng, J.J., Lawanwisut, Wimon and Melchers, Robert E. (2007) Concrete delamination caused by steel reinforcement corrosion. Journal of Materials in Civil Engineering, 19 (7). pp. 591-600. ISSN 0899-1561 (doi:10.1061/(ASCE)0899-1561(2007)19:7(591))

Li, C.Q. and Zhao, J. M. (2010) Time dependent risk assessment of combined overtopping and structural failure for reinforced concrete coastal structures. Journal of Waterway, Port, Coastal, and Ocean Engineering, 136 (2). pp. 97-103. ISSN 0733-950X (print), 1943-5460 (online) (doi:10.1061/(ASCE)WW.1943-5460.0000031)

Li, Chun and Yang, Shangtong (2011) Prediction of concrete crack width under combined reinforcement corrosion and applied load. Journal of Engineering Mechanics, 137. pp. 722-731. ISSN 0733-9399 (print), 1943-7889 (online) (doi:10.1061/(ASCE)EM.1943-7889.0000289)

Li, Chun-Qing, Melchers, Robert E., Davidson, Mark and Yang, Shangtong (2008) Condition assessment of a 63-year old reinforced concrete structure exposed to the North Sea. In: Conference on Durability of Building Materials and Components (11DBMC) "Globality and Locality in Durability", 11-14 May 2008, Istanbul, Turkey. (Unpublished)

Li, Chun-Qing and Zheng, Jian Jun (2007) Closed-form solution for predicting elastic modulus of concrete. ACI Materials Journal, 104 (5). pp. 539-546. ISSN 0889-325X

Li, Fumin, Yuan, Yingshu and Li, Chun-Qing (2011) Corrosion propagation of prestressing steel strands in concrete subject to chloride attack. Construction and Building Materials, 25 (10). pp. 3878-3885. ISSN 0950-0618 (doi:10.1016/j.conbuildmat.2011.04.011)

Li, Ji (2007) A study of the solid particle erosion performance of automative and other novel low carbon steels. PhD thesis, University of Greenwich.

M

Ma, Mingchao (2007) Distributed RBAC for subscription-based remote network services. PhD thesis, University of Greenwich.

Macchini, R., Bradley, M.S.A. and Deng, T. (2013) Influence of particle size, density, particle concentration on bend erosive wear in pneumatic conveyors. Wear, 303 (1-2). pp. 21-29. ISSN 0043-1648 (doi:10.1016/j.wear.2013.02.014)

Macpherson, Allan, Kofinas, Alexander, Jones, Oswald and Thorpe, Richard (2010) Making sense of mediated learning: cases from small firms. Management Learning, 41 (3). pp. 303-323. ISSN 1350-5076 (Print), 1461-7307 (Online) (doi:10.1177/1350507609357002)

Mahmoodian, M. and Li, C.Q. (2012) Service life prediction of underground concrete pipes subjected to corrosion. In: Concrete Solutions 2011. Concrc -The Concrete Solutions series of International Conferences on Concrete Repair . CRC Press. ISBN 9780415616225 (Hardback), 9780203134689 (ebook)

Mallik, Sabuj, Ekere, Ndy, Durairaj, Rajkumar and Marks, Antony (2008) An investigation into the rheological properties of different lead-free solder pastes for surface mount applications. Soldering & Surface Mount Technology, 20 (2). pp. 3-10. ISSN 0954-0911 (doi:1108/09540910810871511)

Mallik, Sabuj, Ekere, Ndy, Durairaj, Rajkumar, Seman, Anton and Marks, Antony (2009) Wall-slip effects in SnAgCu solder pastes used in electronics assembly applications. Materials and Design, 30 (10). pp. 4502-4506. ISSN 0261-3069 (doi:10.1016/j.matdes.2009.05.028)

Mallik, Sabuj, Ekere, Ndy, Marks, Antony, Seman, Anton and Durairaj, Rajkumar (2010) Modeling the structural breakdown of solder paste using the structural kinetic model. Journal of Materials Engineering and Performance, 19 (1). pp. 40-45. ISSN 1059-9495 (Print) 1544-1024 (Online) (doi:10.1007/s11665-009-9448-0)

Mallik, Sabuj, Ekere, Ndy, Marks, Antony, Seman, Anton and Durairaj, Rajkumar (2008) Modelling of the time-dependent flow behaviour of lead-free solder pastes used for flip-chip assembly applications. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 1219-1224. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684527)

Mallik, Sabuj, Ekere, Ndy, Seman, Anton and Durairaj, Rajkumar (2009) Modelling the time-dependent behaviour of solder pastes used in the electronics assembly applications. In: 11th Electronic Material and Packaging Conference (EMAP 2009), 1-2 Dec 2009, Penang, Malaysia. (Unpublished)

Mallik, Sabuj, Schmidt, M., Bauer, R. and Ekere, Ndy (2008) Influence of solder paste components on rheological behaviour. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, USA, pp. 1135-1140. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684512)

Mallik, S., Bauer, R., Hübner, F. and Ekere, N.N. (2011) Evaluating print performance of Sn-Ag-Cu leadfree solder pastes used in electronics assembly process. In: International Conference on Advances in Materials and Processing Technologies (AMPT2010). AIP Conference Proceedings (1315/1). American Institute of Physics (AIP), Melville, NY, USA, pp. 33-38. ISBN 978-0-7354-0871-5 ISSN 0094-243X (doi:10.1063/1.3552465)

Mallik, S., Ekere, N.N. and Bhatti, R. (2010) Empirical modeling of the time-dependent structural build-up of lead-free solder pastes used in the electronics assembly applications. Journal of ASTM International, 7 (9). ISSN 1546-962X (doi:10.1520/JAI103043)

Mallik, S., Schmidt, M., Bauer, R. and Ekere, N.N. (2010) Evaluating solder paste behaviours through rheological test methods and their correlation to the printing performance. Soldering & Surface Mount Technology, 22 (4). pp. 42-49. ISSN 0954-0911 (doi:10.1108/09540911011076871)

Mallik, Sabuj (2010) Rheological characterisation and modelling of electronic materials: time-dependent behaviours of lead-free solder pastes and flux mediums. LAP Lambert Academic Publishing GmbH & Co. KG, Saarbrücken, Germany. ISBN 978-3-8433-7771-3

Mallik, Sabuj (2009) Study of the time-dependent rheological behaviour of lead-free solder pastes and flux mediums used for flip-chip assembly applications. PhD thesis, University of Greenwich.

Mallik, Sabuj, Ekere, Ndy, Best, Chris and Bhatti, Raj (2011) Investigation of thermal management materials for automotive electronic control units. Applied Thermal Engineering, 31 (2-3). pp. 355-362. ISSN 1359-4311 (doi:10.1016/j.applthermaleng.2010.09.023)

Mallik, Sabuj, Thieme, Jens, Bauer, R., Ekere, Ndy, Seman, Anton, Bhatti, Rajinderpal and Durairaj, Rajkumar (2010) Study of the rheological behaviour of Sn-Ag-Cu solder pastes and their correlation with printing performance. In: EPTC 2009 Proceedings of 2009 11th Electronics Packaging Technology Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 869-874. ISBN 978-1-4244-5099-2 (Print), 978-1-4244-5100-5 (e-ISBN) (doi:10.1109/EPTC.2009.5416423)

Marks, A.E., Mallik, S., Ekere, N.N. and Seman, A. (2008) Effect of temperature on slumping behaviour of lead-free solder paste and its rheological simulation. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 829-832. ISBN 97814244-28137 (Print), 978-1-4244-2814-4 (Electronic) (doi:10.1109/ESTC.2008.4684459)

Marks, Antony, Ekere, Ndy, Mallik, Sabuj and Bhatti, Rajinderpal (2011) Effect of particle size distribution (PSD) and flux medium on the creep recovery performance of lead-free solder pastes. Soldering and Surface Mount Technology, 23 (2). pp. 75-84. ISSN 0954-0911 (doi:10.1108/09540911111120140)

Marks, Antony Edward (2012) Characterisation of lead-free solder pastes and their correlation with the stencil printing process performance. PhD thesis, University of Greenwich.

Mason, David John (1991) A study of the modes of gas-solids flow in pipelines. PhD thesis, Thames Polytechnic.

Masroor, Ahmad (1983) Bond strength history in prestressed concrete reactor vessels. PhD thesis, Thames Polytechnic.

Maung, T.S., Chen, Hua Peng and Alani, A.M. (2011) Real time structural damage assessment from vibration measurements. In: 9th International Conference on Damage Assessment of Structures (DAMAS 2011). Journal of Physics: Conference Series, 305 (1). IOP Publishing, Bristol, UK. ISSN 1742-6588 (Print), 1742-6596 (Online) (doi:10.1088/1742-6596/305/1/012096)

Mayur, Yaul, Bhatti, Rajinderpal and Lawrence, Stephen (2008) Evaluating the process of borosilicate glass capillaries used for fabrication of in-vitro fertilization (IVF) micro-pipettes. Biomedical Microdevices, 10 (1). pp. 123-128. ISSN 1387-2176 (doi:10.1007/s10544-007-9117-8)

Melchers, Robert E., Li, Chun-Qing and Lawanwisut, Wimon (2008) Probabilistic modeling of structural deterioration of reinforced concrete beams under saline environment corrosion. Structural Safety, 30 (5). pp. 447-460. ISSN 0167-4730 (doi:10.1016/j.strusafe.2007.02.002)

Melchers, R.E. and Li, C.Q. (2010) Predicting the life of reinforced concrete structures in severe marine environments. In: Bridge maintenance, safety, management and life-cycle optimization: Proceedings of the Fifth International conference on bridge maintenance, safety and management, Philadelphia, Pennsylvania, USA, 11-15 July 2010. Proceedings of the 5th International IABMAS Conference, 2010 (5). CRC Press, Leiden, The Netherlands, p. 314. ISBN 978-0-415-87786-2 (print), 978-0-415-89137-0 (ebook)

Melchers, R.E. and Li, C.Q. (2009) Reinforcement corrosion in concrete exposed to the North Sea for more than 60 years. CORROSION : The Journal of Science and Engineering, 65 (8). pp. 554-566. ISSN 0010-9312 (print) (doi:10.5006/1.3319158)

Melchers, R.E., Li, C.Q. and Davison, M.A. (2009) Observations and analysis of a 63-year-old reinforced concrete promenade railing exposed to the North Sea. Magazine of Concrete Research, 61 (4). pp. 233-243. ISSN 0024-9831 (doi:10.1680/macr.2007.00093)

Melis, W.J.C., Chizuwa, S. and Kameyama, M. (2010) Evaluation of herarchical temporal memory for a real world application. In: Innovative Computing, Information and Control (ICICIC), 2009 Fourth International Conference on. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 144-147. ISBN 978-1-4244-5543-0 (doi:10.1109/ICICIC.2009.195)

Melis, W.J.C., Chizuwa, S. and Kameyama, M. (2009) Evaluation of the hierarchical temporal memory soft computing platform and its VLSI architecture. In: Multiple-Valued Logic, 2009. ISMVL '09. 39th International Symposium on. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 233-238. ISBN 978-1-4244-3841-9 ISSN 0195-623X (doi:10.1109/ISMVL.2009.11)

Melis, W.J.C. and Kameyama, M. (2010) A study of the different uses of colour channels for traffic sign recognition on hierarchical temporal memory. In: Innovative Computing, Information and Control (ICICIC), 2009 Fourth International Conference on. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 111-114. ISBN 978-1-4244-5543-0 (doi:10.1109/ICICIC.2009.55)

Moorman, John Everard (2005) A method for the probabilistic method assessment of structures containing defects. PhD thesis, University of Greenwich.

Morato, M., Chen, Yifan, Yuen, Chau and Lei, Zhongding (2011) Decentralized block diagonalization algorithms for distributed MIMO systems. In: International Symposium on Wireless and Pervasive Computing, ISWPC 2011. IEEE Computer Society, Piscataway, USA, pp. 1-5. ISBN 9781424498680 (Print), 9781424498673 (Online) (doi:10.1109/ISWPC.2011.5751334)

Moreira, C.L., Rua, David, Karfopoulos, E., Zountouridou, E., Soares, F.J., Bourithi, I., Grau, I., Peças Lopes, J.A., Cipcigan, L.M., Seca, Luis, Moschakis, Marios, Rocha Almeida, P.M., Moutis, P., Papadopoulos, P., Rei, R.J., Bessa, Ricardo J. and Skarvelis-Kazakos, S. (2010) Extend concepts of MG by identifying several EV smart control approaches to be embedded in the Smart Grid concept to manage EV individually or in clusters. Project Report. MERGE.

Motamed, J. and Alani, A.M. (2011) Proposal for the retrofit of the world heritage site of Arge Bam after earthquake damage. In: Concrete Solutions 2011. CRC Press/Balkema / Taylor & Francis Group, London, UK, pp. 95-100. ISBN 978-0-415-61622-5 (hbk), 9780203134689 (ebk)

Motamed, Jubin (2005) The Bam earthquake of 26 December 2003, Iran. Other. Institution of Structural Engineers / Earthquake Engineering Field Investigation Team (EEFIT) [website], London, UK.

Motamed, Jubin and Al-Hussaini, Abbas (2009) Influence of central vertical bar on the behaviour of high strength concrete transfer beam-column joints. In: The Third International Conference on Concrete and Development. Building and Housing Research Center, Tehran, Iran, pp. 485-496. (doi:CD02-026)

Motamed, Jubin, Al-Hussaini, Abbas and Alani, Amir Morteza (2012) Shear design of HSC beams with combination of links and horizontal web steel. Magazine of Concrete Research, 64 (9). pp. 781-791. ISSN 0024-9831 (print), 1751-763X (electronic) (doi:10.1680/macr.11.00047)

Mountney, S.L., Gao, James and Wiseall, S. (2007) A knowledge system to support manufacturing knowledge during preliminary design. International Journal of Production Research, 45 (7). pp. 1521-1537. ISSN 0020-7543 (doi:10.1080/00207540600942300)

Mountney, Sara, Roy, Rajkumar and Gao, James (2011) Acquiring innovative manufacturing engineering knowledge for the preliminary design of complex mechanical components. In: Global Product Development. Springer, Berlin / Heidelberg, pp. 457-464. ISBN 978-3-642-15973-2 (doi:10.1007/978-3-642-15973-2_46)

Murnane, S.N., Barnes, R.N., Woodhead, Steve and Amadi-Echendu, J.E. (1996) Electrostatic modelling and measurement of airborne particle concentration. IEEE Transactions on Instrumentation and Measurement, 45 (2). pp. 488-492. ISSN 0018-9456

Murnane, S.N., Barnes, R.N., Woodhead, Steve and Amadi-Echendu, J.E. (1995) Electrostatic modelling and measurement of airborne particles concentration. In: 1995 IEEE Instrumentation and Measurement Technology. Institute of Electrical and Electronics Engineers, New York, pp. 762-765. ISBN 978-0780326156 (doi:10.1109/IMTC.1995.515418)

Mwinkuka, T., Hinduja, S. and Owodunni, Oladele (2007) Extendible operation sequencing for turn-milled components. CIRP Annals - Manufacturing Technology, 56 (1). pp. 473-478. ISSN 0007-8506 (doi:10.10.1016/j.cirp.2007.05.113)

N

Naayagi, R.T., Forsyth, A.J. and Shuttleworth, R. (2011) Performance analysis of DAB DC-DC converter under zero voltage switching. In: Proceedings of the 2011 1st International Conference on Electrical Energy Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineering, Inc., Piscataway, NJ, USA, pp. 56-61. ISBN 9781612843780 (doi:10.1109/ICEES.2011.5725302)

Naayagi, R.T., Shuttleworth, R. and Forsyth, A.J. (2011) Investigating the effect of snubber capacitor on high power IGBT turn-off. In: Proceedings of the 2011 1st International Conference on Electrical Energy Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineering, Inc., Piscataway, NJ, USA, pp. 50-55. ISBN 9781612843780 (doi:10.1109/ICEES.2011.5725301)

Nadjai, Ali, Goodfellow, Nathan, Tee, Kong-Fah, Ali , Faris and Choi, Sengkwan (2010) Analysis of composite floor cellular steel beams. Journal of Structural Fire Engineering. pp. 161-175. ISSN 2040-2317 (Submitted) (doi:10.1260/2040-2317.1.3.161)

Nijsure, Y., Chen, Y., Rapajic, P., Yuen, C., Chew, Y.H. and Qin, T.F. (2010) Information-theoretic algorithm for waveform optimization within ultra wideband cognitive radar network. In: International Conference on Ultra-Wideband (ICUWB). IEEE International Conference on Ultra-Wideband (ICUWB) . IEEE Xplore Digital Library, Nanjing, pp. 1-4. ISBN 978-1-4244-5305-4 (print) ISSN 978-1-4244-5306-1 (online) (doi:10.1109/ICUWB.2010.5616308)

Nijsure, Y., Chen, Yifan, Litchfield, C. and Rapajic, P.B. (2009) Hidden Markov model for target tracking with UWB radar systems. In: Personal, Indoor and Mobile Radio Communications. Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ, USA, pp. 2065-2069. ISBN 978-1-4244-5123-4 (online), 978-1-4244-5122-7 (print) (doi:10.1109/PIMRC.2009.5450337)

Nijsure, Y., Litchfield, C., Chen, Yifan and Rapajic, P.B. (2009) Vector precoding scheme for multi-user MIMO systems. In: Vehicular Technology Conference Fall (VTC 2009-Fall). Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ, USA, pp. 1-5. ISBN 978-1-4244-2514-3 (print), 978-1-4244-2515-0 (electronic) ISSN 1090-3038 (doi:10.1109/VETECF.2009.5378987)

O

Ogunlade, O., Chen, Yifan and Kosmas, P. (2010) Measurement of the complex permittivity of microbubbles using a cavity perturbation technique for contrast enhanced ultra-wideband breast cancer detection. In: 2010 Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC'10. IEEE Computer Society, Piscataway, USA, 6733-6736 . ISBN 978424441235 (doi:0.1109/IEMBS.2010.5626016 )

Ogunlade, Olumide (2011) A mode matching analysis of rectangular dielectric discontinuities in metal waveguides applicable to characterisation of liquids. In: IET 8th International Conference on Computation in Electromagnetics (CEM 2011) (CP577). IET Conference Publications, 2011 (CP577). The Institution of Engineering and Technology, pp. 28-29. ISBN ISBN: 978-1-84919-468-6 (doi:10.1049/cp.2011.0022)

Okereke, M. I. and Akpoyomare, A. I. (2013) A virtual framework for prediction of full-field elastic response of unidirectional composites. Computational Materials Science, 70. pp. 82-99. ISSN 0927-0256 (Online) (doi:/10.1016/j.commatsci.2012.12.036)

Okereke, Michael I., Buckley, C.P. and Siviour, C.R. (2012) Compression of polypropylene across a wide range of strain rates. Mechanics of Time-Dependent Materials. ISSN 1385-2000 (Print), 1573-2738 (Online) (In Press) (doi:10.1007/s11043-012-9167-z)

Oletu, G. and Rapajic, P. (2011) The performance of turbo codes for wireless communication systems. In: ICCRD2011 - 2011 3rd International Conference on Computer Research and Development. IEEE Computer Society, Piscataway, USA, pp. 346-349. ISBN 9781612848396 (doi:10.1109/ICCRD.2011.5763919)

Oletu, G., Rapajic, P., Eneh, T. and Anang, K. (2012) Enhanced equalization for mobile communication systems. In: Computer Modeling and Simulation (EMS). The Institute of Electrical and Electronics Engineers, Inc. , Piscataway, NJ, USA, pp. 446-450. ISBN 978-1-4673-0060-5 (doi:10.1109/EMS.2011.32)

Oletu, G., Rapajic, P., Eneh, T. and Anang, K. (2011) Performance of iterative decoding with imperfect MMSE DFE. Wireless Days. pp. 1-3. ISSN 2156-9711 (doi:10.1109/WD.2011.6098137)

Oletu, Grace, Rapajic, Predrag, Anang, Kwashie, Wu, Ruiheng and Eneh, Titus (2012) The smearing filter design techniques for data transmission. In: 2012 IEEE Vehicular Technology Conference (VTC Fall) Proceedings. IEEE Conference Publications . Institution of Electrical and Electonic Engineers, Inc., Piscataway, NJ, USA. ISBN 978-1-4673-1881-5 ISSN 1090-3038 (doi:10.1109/VTCFall.2012.6398948)

Ostovari-Dailamani, Shadi and Croll, James G. A. (2008) Behaviour of cylindrical and doubly-curved shell roofs under earthquake. In: Proceedings of the 6th International Conference on Computation of Shell and Spatial Structures. Cornell University, Cornell, USA.

Ostovari-Dailamani, Shadi and Croll, James G. A. (2009) Effect of pre-loading on response of cylindrical roof shells under earthquake loading. In: 9th Asia Pacific Conference on Shell and Spatial Structures (APCS) 2009, 27-29 May 2009, Nagoya Congress Center, Nagoya, Japan. (Submitted)

Otiaba, K.C., Bhatti, R.S., Ekere, N.N., Ekpu, M. and Adeyemi, J. (2011) Comparative study of the effects of coalesced and distributed solder die attach voids on thermal resistance of packaged semiconductor device. In: Collection of Papers Presented at the 17th International Workshop on THERMal INvestigation of ICs and Systems (THERMINIC' 2011). EDA Publishing Association, Grenoble, France, pp. 115-119. ISBN 9782355000188

Otiaba, K.C., Bhatti, R.S., Ekere, N.N., Mallik, S., Amalu, E.H. and Ekpu, M. (2011) Thermal effects of die-attach voids location and style on performance of chip level package. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 231-236. ISBN 9781467307581 (doi:10.1109/ICASTech.2011.6145176)

Otiaba, K.C., Ekere, N.N., Amalu, E.H., Bhatti, R.S. and Mallik, S. (2012) Thermal management materials for electronic control unit: trends, processing technology and R and D challenges. Advanced Materials Research, 367. pp. 301-307. ISSN 1022-6680 (Print), 1662-8985 (Online) (doi:10.4028/www.scientific.net/AMR.367.301)

Otiaba, K.C., Ekere, N.N., Amalu, E.H., Bhatti, R.S. and Mallik, S. (2010) Thermal management materials for electronic control unit: trends, processing technology and R&D challenges. In: International Conference on Engineering Research & Development: Advances in Engineering Science & Technology, 7-9 September 2010, Benin City, Africa.

Otiaba, K.C., Ekere, N.N., Bhatti, R.S., Mallik, S., Alam, M.O. and Amalu, E.H. (2011) Thermal interface materials for automotive electronic control unit: Trends, technology and R&D challenges. Microelectronics Reliability, 51 (12). pp. 2031-2043. ISSN 0026-2714 (doi:10.1016/j.microrel.2011.05.001)

Otiaba, K.C., Ekere, N.N., Bhatti, R.S., Mallik, S. and Amalu, E.H. (2011) Emerging nanotechnology-based thermal interface materials for automotive electronic control unit application. In: Microelectronics and Packaging. Institute of Electrical and Electronic Engineers, Inc, Piscataway, NJ, USA, pp. 1-8. ISBN 978-1-4673-0694-2 (print)

Otiaba, Kenny C., Bhatti, R.S., Ekere, N.N., Mallik, S., Alam, M.O., Amalu, E.H. and Ekpu, M. (2012) Numerical study on thermal impacts of different void patterns on performance of chip-scale packaged power device. Microelectronics Reliability, 52 (7). pp. 1409-1419. ISSN 0026-2714 (doi:10.1016/j.microrel.2012.01.015)

Otiaba, Kenny C., Bhatti, R.S., Ekere, N.N., Mallik, S. and Ekpu, M. (2013) Finite element analysis of the effect of silver content for Sn–Ag–Cu alloy compositions on thermal cycling reliability of solder die attach. Engineering Failure Analysis, 28. pp. 192-207. ISSN 1350-6307 (In Press)

Owodunni, Oladele, Hinduja, Srichand, Mekid, Samir and Zia, Ahmad (2007) An investigation of optimum cutting conditions for STEP-NC turned features. In: Innovative Production Machines and Systems Conference 2007 (IPROMS), 2-13 July 2007, http://conference.iproms.org/ [Virtual Conference].

Owonikoko, A., Berry, R.J. and Bradley, M.S.A. (2010) Characterisation of extreme shape materials: “biomass and waste materials”. In: Bulk Solids Europe 2010 Conference and IMechE Symposium in New Frontiers in Bulk Materials Handling , 9-10 September 2010, Glasgow. (Submitted)

P

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Awad, B., Cipcigan, L.M. and Jenkins, N. (2010) Impact of residential charging of electric vehicles on distribution networks, a probabilistic approach. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-7667-1

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2012) Electric vehicles' impact on British distribution networks. IET Electrical Systems in Transportation, 2 (3). pp. 91-102. ISSN 2042-9738 (doi:10.1049/iet-est.2011.0023)

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, L.M. and Jenkins, N. (2011) Predicting Electric Vehicle impacts on residential distribution networks with distributed generation. In: 2010 IEEE Vehicle Power and Propulsion Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-8220-7 (doi:10.1109/VPPC.2010.5729009)

Pillai, John (2009) Direct on-line measurement of wall friction of coal as an indicator of handleability. PhD thesis, University of Greenwich.

Piorkowski, B.A., Evans, R.D. and Gao, J.X. (2011) Development of a face-to-face meeting capture and indexing process. In: Proceedings of the 2011 15th International Conference on Computer Supported Cooperative Work in Design, CSCWD2011. IEEE Computer Society, Piscataway, NJ, USA, pp. 4-8. ISBN 9781457703867 (doi:10.1109/CSCWD.2011.5960047)

Piorkowski, Barry, Gao, James and Evans, Richard (2011) A case-study: finding references to product development knowledge from analysis of face-to-face meetings. In: Glocalized Solutions for Sustainability in Manufacturing Proceedings of the 18th CIRP International Conference on Life Cycle Engineering. Springer, New York, USA, pp. 564-569. ISBN 978-3642196911 (doi:10.1007/978-3-642-19692-8-98)

Piorkowski, Barry Andrew, Gao, James Xiaoyu, Evans, Richard David and Martin, Nick (2013) A dynamic knowledge management framework for the high value manufacturing industry. International Journal of Production Research, 51 (7). pp. 2176-2185. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:10.1080/00207543.2012.709650)

Prest, M.J., Wang, Y., Huang, F. and Lancaster, M.J. (2008) Silicon comb-drive actuators for low-temperature tuning of superconducting microwave circuits. Journal of Micromechanics and Microengineering, 18 (12). p. 125003. ISSN 0960-1317 (Print), 1361-6439 (Online) (doi:10.1088/0960-1317/18/12/125003)

Q

Qureshi, A., Kanakis, T., Litchfield, C. and Rapajic, P. (2010) Adaptive MMSE multiuser detection (A-MMSE-MUD) in asynchronous cooperative CDMA networks. In: SoftCOM 2010 - International Conference on Software, Telecommunications and Computer Networks. IEEE Computer Society, Piscataway, USA, 260 -264. ISBN 9781424486632 (Print), 9789532900040 (Online)

Qureshi, A., Kanakis, T. and Rapajic, P. (2010) Adaptive signal combining with unequal channel noise variances. International Journal of Simulation: Systems, Science and Technology, 11 (6). pp. 14-21. ISSN 1473 804x (online), 1473 8031 (print)

Qureshi, Athar (2011) Adaptive signal combining and detection in cooperative wireless networks. PhD thesis, University of Greenwich.

Qureshi, Athar, Balasubramanyam, Ramkumar and Rapajic, Predrag (2010) Combining signals by weighted least square error method for wireless communication networks. International Journal of Simulation: Systems, Science and Technology, 11 (6). pp. 8-13. ISSN 1473 804x (online), 1473 8031 (print)

Qureshi, Athar, Kanakis, Triantafyllos and Rapajic, Predrag (2010) Adaptive combining of signals with unequal noise variances. In: 2nd International Conference on Computational Intelligence, Modelling and Simulation (CIMSiM). IEEE Computer Society, Conference Publishing Services, Washington, USA, pp. 488-493. ISBN 978-1-4244-8652-6 (Print), 978-0-7695-4262-1 (Online) (doi:10.1109/CIMSiM.2010.21)

Qureshi, Athar, Kanakis, Triantafyllos and Rapajic, Predrag (2011) Interference resistance of adaptive multiuser detection in asynchronous detect and forward relaying CDMA networks. In: 2011 Baltic Congress on Future Internet Communications (BCFIC Riga 2011). IEEE Explore, Piscataway, NJ, USA, pp. 90-95. ISBN 9781424485116 (doi:10.1109/BCFIC-RIGA.2011.5733225)

R

Raab, A. F., Ferdowsi, M., Karfopoulos, E., Unda, I. Grau, Skarvelis-Kazakos, S., Papadopoulos, P., Abbasi, E., Cipcigan, L.M., Jenkins, N., Hatziargyriou, N. and Strunz, K. (2011) Virtual power plant control concepts with electric vehicles. In: 16th International Conference on Intelligent System Applications to Power Systems. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4577-0807-7 (Print), 978-1-4577-0808-4 (Online) (doi:10.1109/ISAP.2011.6082214)

Rapajic, Predrag, Kabir, Ahsanul, Huang, Kao-Cheng and Wu, Ruiheng (2007) Next generation identity card: RFID-based automatic access control system for universities. In: Selected Topics on Circuits, Systems, Electronics, Control & Signal Processing: Proceedings of the 6th WSEAS International Conference on Circuits, Systems, Electronics, Control & Signal Processing. Electrical and Computer Engineering . WSEAS Press, Singapore, pp. 480-483. ISBN 9789606766282

Rapajic, Predrag and Kanakis, Triantafyllos (2008) MIMO relay channels with partial channel knowledge/estimation error and spatial correlation. In: Proceedings of the 1st International Conference on Signal Processing and Telecommunication Systems ICSPCS'2007 Australia, Gold Coast December 17-19, 2007. DSP for Communication Systems, Tarrawanna, New South Wales, Australia, pp. 43-47. ISBN 9780975693445

Rapajic, Predrag, Kennedy, Rodney A. and Krusevac, Snezana M. (2007) Effect of signal and noise mutual coupling on MIMO channel capacity. Wireless Personal Communications, 40 (3). pp. 317-328. ISSN 0929-6212 (doi:10.1007/s11277-006-9193-8)

Rapajic, Predrag and Krusevac, Zarko B. (2008) Equivalent channel for capacity analysis of differential detection over time-varying communication channels. In: Proceedings of the 1st International Conference on Signal Processing and Telecommunication Systems ICSPCS'2007 Australia, Gold Coast December 17-19, 2007. DSP for Communication Systems, Tarrawanna, New South Wales, Australia, pp. 21-26. ISBN 9780975693445

Rapajic, Predrag, Liu, Yang, Kennedy, Rodney A. and Sadeghi, Parastoo (2008) Pilot symbol transmission for time-varying fading channels: an information-theoretic optimization. In: Proceedings of the 1st International Conference on Signal Processing and Telecommunication Systems ICSPCS'2007 Australia, Gold Coast December 17-19, 2007. DSP for Communication Systems, Tarrawanna, New South Wales, Australia, pp. 34-42. ISBN 9780975693445

Rezania, Mohammad, Faramarzi, Asaad and Javadi, Akbar A. (2011) An evolutionary based approach for assessment of earthquake-induced soil liquefaction and lateral displacement. Engineering Applications of Artificial Intelligence, 24 (1). pp. 142-153. ISSN 0952-1976 (doi:10.1016/j.engappai.2010.09.010)

Rizzuto, J.P. and Larsen, O.Popovic (2010) Connection systems in reciprocal frames and mutually supported elements space structure networks. International Journal of Space Structures, 25 (4). pp. 243-256. ISSN 0266-3511 (Submitted) (doi:10.1260/0266-3511.25.4.243)

Robinson, J.P., Kingman, S.W., Snape, C.E., Bradshaw, S.M., Bradley, M.S.A., Shang, H. and Barranco, R. (2010) Scale-up and design of a continuous microwave treatment system for the processing of oil-contaminated drill cuttings. Chemical Engineering Research and Design, 88 (2). pp. 146-154. ISSN 0263-8762 (doi:10.1016/j.cherd.2009.07.011)

Robinson, R., Kingman, S., Snape, C., Bradley, M., Bradshaw, S., Thomas, D. and Page, P. (2009) Microwave treatment of oil-contaminated drill cuttings at pilot scale. SPE Drilling and Completion, 24 (3). pp. 430-435. ISSN 1064-6671 (print), 1930-0204 (online) (doi:10.2118/111637-PA)

S

Sadeghi, Parastoo and Rapajic, Predrag (2008) On information rates of time-varying fading channels modeled as finite-state Markov channels. IEEE Transactions on Communications, 56 (8). pp. 1268-1278. ISSN 0090-6778 (doi:10.1109/TCOMM.2008.060622)

Sadeghi, Parastoo, Kennedy, Rodney A., Rapajic, Pedrag B. and Shams, Ramtin (2008) Finite-state Markov modeling of fading channels: a survey of principles and applications. IEEE Signal Processing Magazine, 25 (5). pp. 57-80. ISSN 1053-5888 (doi:10.1109/MSP.2008.926683)

Sahatoo, Divesh, Chowdary, Boppana V., Ali, Fahraz F. and Bhatti, Rajinderpal (2008) Slicing issues in CAD translation to STL in rapid prototyping. In: Proceedings of The 2008 IAJC-IJME International Conference. International Association of Journals and Conferences/International Journal of Modern Engineering, California State University, Northridge. ISBN 9781606433799

Salam, B. and Ekere, Ndy (2006) A study of inter-metallic compounds (IMC) formation and growth in ultra-fine pitch Sn-Ag-Cu lead-free solder joints. In: ESTC 2006: 1st Electronics Systemintegration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, pp. 988-994. ISBN 1424405521 (doi:10.1109/ESTC.2006.280131)

Salter, G.F., Farnish, R.J., Bradley, M.S.A. and Burnett, A.J. (2000) Segregation of binary mixtures of particles during the filling of a two-dimensional representation of a hopper. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 214 (3). pp. 197-208. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/0954408001530056)

Saur-Amaral, Irina and Kofinas, Alexander (2010) Multidisciplinary collaborations in pharmaceutical innovation: a two case-study comparison. Journal of Business Chemistry, 7 (3). pp. 131-154. ISSN 1613-9615

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) Development of an in-situ, non-destructive ultrasonic monitoring technique for solder pastes. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 209-214. ISBN 9781424428137 (doi:10.1109/ESTC.2008.4684351)

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) In-situ non-destructive ultrasonic rheology technique for monitoring different lead-free solder pastes for surface mount applications. In: 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1448-1454. ISBN 9781424421176 (doi:10.1109/EPTC.2008.4763635)

Seman, Anton (2010) On-line non-destructive ultrasonic rheology measurement of solder pastes. PhD thesis, University of Greenwich.

Shang, X., Wang, Y., Nicholson, G.L. and Lancaster, M.J. (2012) Design of multiple-passband filters using coupling matrix optimisation. IET Microwaves, Antennas & Propagation, 6 (1). pp. 24-30. ISSN 1751-8725 (Print), 1751-8733 (Online) (doi:10.1049/iet-map.2011.0261)

Shao, Jiaqing, Krabicka, Jan and Yan, Yong (2010) Velocity measurement of pneumatically conveyed particles using intrusive electrostatic sensors. IEEE Transactions on Instrumentation and Measurement, 59 (5). 1477 -1484. ISSN 0018-9456 (doi:10.1109/TIM.2010.2040960)

Shehu, T. and Bhatti, R.S. (2012) The use of Yam flour (starch) as binder for sand mould production in Nigeria. World Applied Sciences Journal, 16 (6). pp. 858-862. ISSN 1818-495 (doi:wasj/wasj16(6)12/14.pdf)

Sigthorsson, Gauti (2008) Home is where my archive is. In: Screen Studies Conference, 2008, University of Glasgow, Scotland. (Unpublished)

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2009) Micro-generation for 2050: emissions performances of micro-generation sources during operation. Pollack Periodica, 4 (2). pp. 89-99. ISSN 1788-1994 (Print), 1788-3911 (Online) (doi:10.1556/Pollack.4.2009.2.9)

Skarvelis-Kazakos, Spyros, Cipcigan, Liana M. and Jenkins, Nicholas (2010) Micro-generation for 2050: life-cycle carbon footprint of micro-generation sources. In: 2009 44th International Universities’ Power Engineering Conference. Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA. ISBN 978-1-4244-6823-2

Skarvelis-Kazakos, Spyros, Papadopoulos, Panagiotis, Grau, Iñaki, Gerber, Annelies, Cipcigan, Liana M., Jenkins, Nick and Carradore, Loredana (2010) Carbon optimized virtual power plant with electric vehicles. In: 2010 45th International Universities’ Power Engineering Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J., USA, . ISBN 978-1-4244-7667-1

Soroka, A.J. and Hieu, L.C. (2011) Design challenges for implementing a customer driven mass-customisation system. In: Proceedings - INDIN 2011: 2011 9th IEEE International Conference on Industrial Informatics. Institute of Electrical and Electronics Engineers Inc, Piscataway, USA, pp. 857-862. ISBN 9781457704338 (Online), 9781457704352 (Print) (doi:10.1109/INDIN.2011.6035005)

T

Takyi, G., Amalu, E.H. and Bernasko, P.K. (2011) Effect of solder joint integrity on the thermal performance of a TEC for a 980nm pump laser module. Soldering and Surface Mount Technology, 23 (2). pp. 115-119. ISSN 0954-0911 (print) (doi:10.1108/09540911111120186)

Takyi, G. and Ekere, N.N. (2010) Investigation of the effect of nitrogen and air atmospheres on solder wettability of plasma-treated HASL finish PCBs. Soldering and Surface Mount Technology, 22 (3). pp. 17-21. ISSN 0954 0911 (doi:10.1108/09540911011054154)

Takyi, G. and Ekere, N.N. (2010) Study of the effects of PCB surface finish on plasma process time for lead-free wave soldering. Soldering & Surface Mount Technology, 22 (2). pp. 37-42. ISSN 0954-0911 (doi:10.1108/09540911011036271)

Tandur, Deepaknath, Duplicy, Jonathan, Arshad, Kamran, Depierre, David, Moessner, Klaus, Lehtomäki, Janne, Briggs, Keith, Gonçalves, Luis and Gameiro, Atílio (2012) Cognitive radio systems evaluation: measurement, modeling, and emulation approach. IEEE Vehicular Technology Magazine, 7 (2). pp. 77-84. ISSN 1556-6072 (doi:10.1109/MVT.2012.2190219)

Tao, Mei and Seals, R.C. (1993) Multicomponent gas-mixture measurements using an array of gas sensors and an artificial neural-network. Journal of Microcomputer Applications, 16 (2). pp. 203-210. (doi:10.1006/jmca.1993.1018)

Tee, Kong-Fah and Chen, Hua-Peng (2010) Retrieving full stiffness matrix from experimental condensed models. In: 10th International Conference on Recent Advances in Structural Dynamics, 12-14 July , Southampton, UK. (Unpublished)

Tee, Kong-Fah, Christopher, C.J., James, M.N. and Patterson, E.A. (2007) New insights into plasticity-induced crack tip shielding via mathematical modelling and full field photoelasticity. Key Engineering Materials, 345-346. pp. 199-204. ISSN 1013-9826 (doi:10.4028/www.scientific.net/KEM.345-346.199)

Tee, Kong-Fah, Christopher, C.J., James, M.N. and Patterson, E.A. (2007) New insights into plasticity-induced crack tip shielding via mathematical modelling and full field photoelasticity. In: 10th International Conference on the Mechanical Behavior of Materials (ICM), 27-31 May 2007, Busan, Korea. (Unpublished)

Tee, Kong-Fah, Christopher, C.J., James, M.N. and Patterson, E.A. (2007) Towards a new model of crack tip stress fields. International Journal of Fracture, 148 (4). pp. 361-371. ISSN 0376-9429 (doi:10.1007/s10704-008-9209-3)

Tee, Kong-Fah, Spadoni, A., Scarpa, F. and Ruzzene, M. (2008) Vibroacoustics and wave propagation of novel chiral honeycombs. Proceedings of SPIE: Advanced Materials and Structures, 6928, 69280J. ISSN 0277-786X (doi:10.1117/12.776075)

Tee, K.F., Koh, C.G. and Quek, S.T. (2009) Numerical and experimental studies of a substructural identification strategy. Structural Health Monitoring, 8 (5). pp. 397-410. ISSN 1475-9217 (doi:10.1177/1475921709102089)

Tee, K.F. and Li, C.Q. (2011) A numerical study of maintenance strategy for concrete structures in marine environment. In: Applications of Statistics and Probability in Civil Engineering - Proceedings of the 11th International Conference on Applications of Statistics and Probability in Civil Engineering. The International Conference on Application of Statistics and Probability in Civil Engineering (ICASP) (11). CRC Press, London, UK, pp. 181-183. ISBN 978-0-415-66986-3 (Hardback), 978-0-203-14479-4 (eBook)

Tee, K.T., Spadoni, A., Scarpa, F. and Ruzzene, M. (2010) Wave propagation in auxetic tetrachiral honeycombs. Journal of Vibration and Acoustics , 132 (3). 031007-031015. ISSN 0739-3717 (doi:10.1115/1.4000785)

Teo, Jianqi, Chen, Yifan, Soh, Cheong Boon, Gunawan, E., Low, Kay Soon, Putti, T.C. and Wang, Shih-Chang (2010) Breast lesion classification using ultrawideband early time breast lesion response. IEEE Transactions on Antennas and Propagation, 58 (8). pp. 2604-2613. ISSN 0018 926X (doi:10.1109/TAP.2010.2050423)

Teo, Jianqi, Chen, Yifan, Soh, Cheong Boon, Gunawan, Erry, Low, Kay Soon, Putti, Thomas Choudary and Wang, Shih-Chang (2010) An overview of radar based ultra wideband breast cancer detection algorithms. International Journal of Ultra Wideband Communications and Systems, 1 (4). pp. 273-281. ISSN 1758-728X (Print), 1758-7298 (Online) (doi:10.1504/IJUWBCS.2010.034308)

Trajkovic, Vladimir D., Rapajic, Predrag and Kennedy, Rodney A. (2008) Adaptive ordering for imperfect successive decision feedback multiuser detection. IEEE Transactions on Communications, 56 (2). pp. 173-176. ISSN 0090-6778 (doi:10.1109/TCOMM.2008.040650)

V

van Manen, P. (1984) The dynamic behaviour of rail vehicles operating at high speeds for manriding in British coal mines. PhD thesis, Thames Polytechnic.

W

Wang, Tong, Zhang, Lingmi and Tee, Kong Fah (2011) Extraction of real modes and physical matrices from modal testing. Earthquake Engineering and Engineering Vibration, 10 (2). pp. 219-227. ISSN 1993-503X (online) (doi:10.1007/s11803-011-0060-6)

Wang, W., Liu, Z.D., Tian, Z.J., Huang, Y.H., Liu, Z.X. and Ekere, N.N. (2008) Study of wire electrolytic-spark hybrid machining of silicon solar wafer and surface characteristics. In: 2nd Electronics System Integration Technology Conference, Greenwich, UK. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc, Piscataway, NJ, USA, 593-596 . ISBN 978-1-4244-2813-7 (Print), 978-1-4244-2814-4 (Electronic) (doi:10.1109/ESTC.2008.4684417)

Wang, Yi, Ke, Maolong, Lancaster, M.J. and Huang, F. (2009) Micromachined millimeter-wave rectangular-coaxial branch-line coupler with enhanced bandwidth. IEEE Transactions on Microwave Theory and Techniques, 57 (7). pp. 1655-1660. ISSN 0018-9480 (doi:10.1109/TMTT.2009.2021872)

Wang, Yi, Ke, Maolong, Lancaster, Michael J. and Chen, Jian (2011) Micromachined 300-GHz SU-8-based slotted waveguide antenna. IEEE Antennas and Wireless Propagation Letters, 10. pp. 573-576. ISSN 1536-1225 (doi:10.1109/LAWP.2011.2158285)

Wetherall, Jodie and Woodhead, Steve (2008) Investigation into a modular rule-based testing method for testing business rules in scheduling applications. In: Proceedings 12th World Multi-Conference on Systemics, Cybernetics and Informatics. International Institute of Informatics and Systemics, Orlando, FL, USA, pp. 204-208. ISBN 9781934272312

Wetherall, Jodie (2010) Investigation into an improved modular rule-based testing framework for business rules. PhD thesis, University of Greenwich.

Woodcock, C. R. (1978) The flow of particulate bulk solids in an air-assisted gravity conveyor. PhD thesis, Thames Polytechnic.

Woodhead, Steve and Amadi-Echendu, J.E. (1995) Solid phase velocity measurements utilising electrostatic sensors and cross correlation signal processing. In: 1995 IEEE Instrumentation and Measurement Technology. Institute of Electrical and Electronics Engineers, New York, pp. 774-777. ISBN 978-0780326156 (doi:10.1109/IMTC.1995.515421)

Woodhead, Steve and Armour-Chelu, David (2002) Comparison of the electric charging properties of particulate materials in gas–solids flows in pipelines. Journal of Electrostatics, 56 (1). pp. 87-101. ISSN 0304-3886 (doi:10.1016/S0304-3886(02)00032-3)

Woodhead, Steve and Armour-Chelu, David (2003) The influence of humidity, temperature and other variables on the electric charging characteristics of particulate aluminium hydroxide in gas-solid pipeline flows. Journal of Electrostatics, 58 (3-4). pp. 171-183. ISSN 0304-3886 (doi:10.1016/S0304-3886(03)00046-9)

Woodhead, Steve and Ma, Mingchao (2006) Authentication delegation for subscription-based remote network services. Computers and Security, 25 (5). pp. 371-378. ISSN 0167-4048 (doi:10.1016/j.cose.2006.03.006)

Woodhead, Steve, Pittman, A.N. and Ashenden, Stuart J. (1995) Laser Doppler velocimetry measurements of particle velocity profiles in gas-solid two-phase flows. In: 1995 IEEE Instrumentation and Measurement Technology. Institute of Electrical and Electronics Engineers, New York, pp. 770-773. ISBN 978-0780326156

Woodhead, Stephen Robert (1992) The measurement of particle velocity and suspension density in pneumatic coal injection systems. PhD thesis, University of Greenwich.

Wu, Ruiheng, Lidgey, F.J. and Hayatleh, K. (2007) Design of amplifiers with high gain accuracy and high linearity. In: 2007 50TH Midwest Symposium on Circuits and Systems. Midwest Symposium on Circuits and Systems Conference Proceedings , 1-3 . Institute of Electrical and Electronics Engineers , New York, pp. 269-272. ISBN 9781424411757 (doi:10.1109/MWSCAS.2007.4488586)

Wu, Ruiheng, Lidgey, F.J. and Hayatleh, K. (2008) Design of differential amplifier with negative impedance compensation. In: 2008 4th International Conference on Circuits and Systems for Communications. Institute of Electrical and Electronics Engineers, New York, pp. 589-593. ISBN 9781424417070 (doi:10.1109/ICCSC.2008.131)

Wu, Ruiheng and Wang, Chen (2008) Stability analysis of the amplifier with negative impedance compensation. In: 2008 51st Midwest Symposium on Circuits and Systems. Institute of Electrical and Electronics Engineers, New York, pp. 803-806. ISBN 9781424421664

Wu, R., Lidgey, F.J., Hayatleh, K. and Hart, B.L. (2010) Differential amplifier with improved gain-accuracy and linearity. Interntional Journal of Circuit Theory and Applications, 38 (8). pp. 829-844. ISSN 0098-9886 (doi:10.1002/cta.601)

X

Xiao, Nan and Chen, Hua Peng (2011) Theoretical prediction on the shear capacities of shear connectors in steel column bases. Advances in Structural Engineering, 14 (5). pp. 953-966. ISSN 1369-4332 (doi:10.1260/1369-4332.14.5.953)

Xiao, Nan, Chen, Hua Peng, Sun, Liqiang and Wang, Hai (2011) New open-web roofs for integrating heat preservation & insulation and structural functions. In: 2011 International Conference on Multimedia Technology, ICMT 2011. IEEE Computer Society, Piscataway, USA, pp. 1123-1126. ISBN 9781612847719 (doi:10.1109/ICMT.2011.6002873)

Xiao, Nan, Chen, Hua Peng, Sun, Liqiang and Wang, Xiang (2011) Experimental study on thermal performance of improved open-web roofs with induced ventilation. In: 2011 International Conference on Multimedia Technology, ICMT 2011. IEEE Computer Society, Piscataway, USA, 6398 -6401. ISBN 9781612847719 (doi:10.1109/ICMT.2011.6002740)

Y

Yan, Y., Byrne, B., Woodhead, Steve and Coulthard, John M. (1995) Velocity measurement of pneumatically conveyed solids using electrodynamic sensors. Measurement Science and Technology, 6 (5). pp. 515-537. ISSN ISSN 0957-0233 (Print) ISSN 1361-6501 (Online) (doi:10.1088/0957-0233/6/5/013)

Yang, Feng, Zhang, Zhenrong and Chen, Yifan (2009) Maximum-likelihood estimator for coarse carrier frequency offset estimation in OFDM systems. Wireless Personal Communications, 49 (1). pp. 55-66. ISSN 0929-6212 (Print), 1572-834X (Online) (doi:10.1007/s11277-008-9555-5)

Yang, Shangtong (2010) Concrete crack width under combined reinforcement corrosion and applied load. PhD thesis, University of Greenwich.

Yang, Shangtong and Li, Chun-Qing (2011) Numerical prediction for corrosion-induced concrete crack width. Proceedings of Institution of Civil Engineers: Construction Materials, 164 (6). pp. 293-303. ISSN 1747-650X (print), 1747-6518 (online) (doi:10.1680/coma.1000046)

Z

Zahir, Talha, Arshad, Kamran, Nakata, Atsushi and Moessner, Klaus (2013) Interference management in femtocells. IEEE Communications Surveys & Tutorials, 15 (1). pp. 293-311. ISSN 1553-877X (doi:10.1109/SURV.2012.020212.00101)

Zaman, Nafis Imtiaz, Al Mamun, Kazi M.D. Amullah, Uddin, Abu Moen Mohammad Salah and Kanakis, Triantafyllos (2010) Performance analysis of MIMO relaying channels'cooperative diversity for mobile networks. In: Proceedings - 2nd International Symposium on Data, Privacy, and E-Commerce, ISDPE 2010. IEEE Computer Society, Piscataway, USA, pp. 95-99. ISBN 9781424483778 (Print), 9780769542034 (Online) (doi:10.1109/ISDPE.2010.28)

Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.

Zhang, Pengcheng and Gao, James (2010) Requirements driven knowledge system design for product development. In: Proceedings of the 6th CIRP-Sponsored International Conference on Digital Enterprise Technology. Advances in Intelligent and Soft Computing, 66/201 . Springer, Hong Kong, pp. 169-184. ISBN 9783642104299 ISSN 1867-5662 (doi:10.1007/978-3-642-10430-5_13)

Zhang, Pengcheng, Gao, James and Wang, Yinglin (2011) Requirement driven knowledge management system design to support automotive product development. International Journal of Product Lifecycle Management (IJPLM), 5 (2-4). pp. 202-223. ISSN 1743-5110 (doi:10.1504/IJPLM.2011.043188)

Zhang, Yan, Chen, Yifan, He, Jianhua, Wang, Cheng-Xiang and Vasilakos, Athanasios V. (2009) Call admission control algorithms in OFDM-based wireless multiservice networks. Wireless Personal Communications, 50 (1). pp. 99-114. ISSN 0929-6212 (Print), 1572-834X (Online) (doi:10.1007/s11277-008-9540-z)

Zhou, X.Z., Zheng, J.J. and Li, Chun-Qing (2006) An analytical method for prediction of the elastic modulus of concrete. Magazine of Concrete Research, 58 (10). pp. 665-673. ISSN 0024-9831 (doi:10.1680/macr.2006.58.10.665)

Zhu, Haihua, Gao, James, Li, Dongbo and Tang, Dunbing (2012) A Web-based Product Service System for aerospace maintenance, repair and overhaul services. Computers in Industry, 63 (4). pp. 338-348. ISSN 0166-3615 (doi:10.1016/j.compind.2012.02.016)