Skip navigation

Items where Author is "Reed, Alan R."

Items where Author is "Reed, Alan R."

Up a level
Export as [feed] RSS
Group by: Item Type | Uncontrolled Keywords | No Grouping
Number of items: 26.

annular wall friction tester

Bradley, Michael S.A., Berry, Rob, Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction tester and test procedure, suitable for equipment design and powder characterisation. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)

bulk solids

Bradley, Michael S.A., Farnish, Richard J., Reed, Alan R. and Kulkarni, Prasanna (2007) Evaluation of air induced segregation tendencies in pharmaceutical blends using a bench scale tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)

bulk solids handling

Bradley, Michael S.A., Berry, Rob, Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction tester and test procedure, suitable for equipment design and powder characterisation. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)

caking

Leaper, M.C., Bradley, Michael S.A., Cleaver, J.A.S., Bridle, Ian, Reed, Alan R., Abou-Chakra, H. and Tüzün, Ugur (2002) Constructing an engineering model for moisture migration in bulk solids as a prelude to predicting moisture migration caking. Advanced Powder Technology, 13 (4). pp. 411-424. (doi:10.1163/156855202320536043)

centripetal effect accelerator erosion tester

Burnett, A.J., Desilva, S.R. and Reed, Alan R. (1995) Comparisons between “sand blast” and “centripetal effect accelerator” type erosion testers. Wear, 186-18 (1). pp. 168-178. ISSN 0043-1648 (doi:10.1016/0043-1648(95)07143-1)

continuum modeling

Christakis, Nicholas, Chapelle, Pierre, Strusevich, Nadezhda, Bridle, Ian, Baxter, John, Patel, Mayur K., Cross, Mark, Tüzün, Ugur, Reed, Alan R. and Bradley, Michael S. A. (2006) A hybrid numerical model for predicting segregation during core flow discharge. Advanced Powder Technology, 17 (6). pp. 641-662. ISSN 0921-8831 (doi:10.1163/156855206778917715)

core flow

Christakis, Nicholas, Chapelle, Pierre, Strusevich, Nadezhda, Bridle, Ian, Baxter, John, Patel, Mayur K., Cross, Mark, Tüzün, Ugur, Reed, Alan R. and Bradley, Michael S. A. (2006) A hybrid numerical model for predicting segregation during core flow discharge. Advanced Powder Technology, 17 (6). pp. 641-662. ISSN 0921-8831 (doi:10.1163/156855206778917715)

degradation toolkit

Abou-Chakra, Hadi, Baxter, John, Tuzun, Ugur, Chapelle, Pierre, Patel, Mayur, Bridle, Ian, Bradley, Michael S.A. and Reed, Alan R. (2004) Degradation toolkit for predicting the amount of degradation of particulate solids in lean phase pneumatic conveyors. In: International Conference for Particle Technology (PARTEC 2004), 16-18 March 2004, Nuremberg, Germany. (Unpublished)

equipment design

Berry, Rob, Bradley, Michael S. A., Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction test procedure, suitable for equipment design and powder characterisation. In: ICBMH Conference: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, Australia. (Unpublished)

erosion testers

Burnett, A.J., Desilva, S.R. and Reed, Alan R. (1995) Comparisons between “sand blast” and “centripetal effect accelerator” type erosion testers. Wear, 186-18 (1). pp. 168-178. ISSN 0043-1648 (doi:10.1016/0043-1648(95)07143-1)

granular material

Christakis, Nicholas, Chapelle, Pierre, Strusevich, Nadezhda, Bridle, Ian, Baxter, John, Patel, Mayur K., Cross, Mark, Tüzün, Ugur, Reed, Alan R. and Bradley, Michael S. A. (2006) A hybrid numerical model for predicting segregation during core flow discharge. Advanced Powder Technology, 17 (6). pp. 641-662. ISSN 0921-8831 (doi:10.1163/156855206778917715)

humidity

Leaper, M.C., Bradley, Michael S.A., Cleaver, J.A.S., Bridle, Ian, Reed, Alan R., Abou-Chakra, H. and Tüzün, Ugur (2002) Constructing an engineering model for moisture migration in bulk solids as a prelude to predicting moisture migration caking. Advanced Powder Technology, 13 (4). pp. 411-424. (doi:10.1163/156855202320536043)

lean phase

Abou-Chakra, Hadi, Baxter, John, Tuzun, Ugur, Chapelle, Pierre, Patel, Mayur, Bridle, Ian, Bradley, Michael S.A. and Reed, Alan R. (2004) Degradation toolkit for predicting the amount of degradation of particulate solids in lean phase pneumatic conveyors. In: International Conference for Particle Technology (PARTEC 2004), 16-18 March 2004, Nuremberg, Germany. (Unpublished)

micro-physical parametrizations

Christakis, Nicholas, Chapelle, Pierre, Strusevich, Nadezhda, Bridle, Ian, Baxter, John, Patel, Mayur K., Cross, Mark, Tüzün, Ugur, Reed, Alan R. and Bradley, Michael S. A. (2006) A hybrid numerical model for predicting segregation during core flow discharge. Advanced Powder Technology, 17 (6). pp. 641-662. ISSN 0921-8831 (doi:10.1163/156855206778917715)

modeling

Leaper, M.C., Bradley, Michael S.A., Cleaver, J.A.S., Bridle, Ian, Reed, Alan R., Abou-Chakra, H. and Tüzün, Ugur (2002) Constructing an engineering model for moisture migration in bulk solids as a prelude to predicting moisture migration caking. Advanced Powder Technology, 13 (4). pp. 411-424. (doi:10.1163/156855202320536043)

moisture

Leaper, M.C., Bradley, Michael S.A., Cleaver, J.A.S., Bridle, Ian, Reed, Alan R., Abou-Chakra, H. and Tüzün, Ugur (2002) Constructing an engineering model for moisture migration in bulk solids as a prelude to predicting moisture migration caking. Advanced Powder Technology, 13 (4). pp. 411-424. (doi:10.1163/156855202320536043)

particle impact

Burnett, A.J., Desilva, S.R. and Reed, Alan R. (1995) Comparisons between “sand blast” and “centripetal effect accelerator” type erosion testers. Wear, 186-18 (1). pp. 168-178. ISSN 0043-1648 (doi:10.1016/0043-1648(95)07143-1)

particulate solids

Abou-Chakra, Hadi, Baxter, John, Tuzun, Ugur, Chapelle, Pierre, Patel, Mayur, Bridle, Ian, Bradley, Michael S.A. and Reed, Alan R. (2004) Degradation toolkit for predicting the amount of degradation of particulate solids in lean phase pneumatic conveyors. In: International Conference for Particle Technology (PARTEC 2004), 16-18 March 2004, Nuremberg, Germany. (Unpublished)

pipeline route

Schuster, T., Bradley, M.S.A. and Reed, Alan R. (1995) The dependence of power consumption of pneumatic conveying systems upon bulk material properties, pipeline bore and routing, and mode of flow. Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering, 209 (E1). pp. 69-75. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/PIME_PROC_1995_209_230_02)

pneumatic conveyors

Abou-Chakra, Hadi, Baxter, John, Tuzun, Ugur, Chapelle, Pierre, Patel, Mayur, Bridle, Ian, Bradley, Michael S.A. and Reed, Alan R. (2004) Degradation toolkit for predicting the amount of degradation of particulate solids in lean phase pneumatic conveyors. In: International Conference for Particle Technology (PARTEC 2004), 16-18 March 2004, Nuremberg, Germany. (Unpublished)

Schuster, T., Bradley, M.S.A. and Reed, Alan R. (1995) The dependence of power consumption of pneumatic conveying systems upon bulk material properties, pipeline bore and routing, and mode of flow. Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering, 209 (E1). pp. 69-75. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/PIME_PROC_1995_209_230_02)

powder characterisation

Berry, Rob, Bradley, Michael S. A., Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction test procedure, suitable for equipment design and powder characterisation. In: ICBMH Conference: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, Australia. (Unpublished)

sand blast erosion tester

Burnett, A.J., Desilva, S.R. and Reed, Alan R. (1995) Comparisons between “sand blast” and “centripetal effect accelerator” type erosion testers. Wear, 186-18 (1). pp. 168-178. ISSN 0043-1648 (doi:10.1016/0043-1648(95)07143-1)

segregation

Bradley, Michael S.A., Farnish, Richard J., Reed, Alan R. and Kulkarni, Prasanna (2007) Evaluation of air induced segregation tendencies in pharmaceutical blends using a bench scale tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)

Christakis, Nicholas, Chapelle, Pierre, Strusevich, Nadezhda, Bridle, Ian, Baxter, John, Patel, Mayur K., Cross, Mark, Tüzün, Ugur, Reed, Alan R. and Bradley, Michael S. A. (2006) A hybrid numerical model for predicting segregation during core flow discharge. Advanced Powder Technology, 17 (6). pp. 641-662. ISSN 0921-8831 (doi:10.1163/156855206778917715)

sugar

Leaper, M.C., Bradley, Michael S.A., Cleaver, J.A.S., Bridle, Ian, Reed, Alan R., Abou-Chakra, H. and Tüzün, Ugur (2002) Constructing an engineering model for moisture migration in bulk solids as a prelude to predicting moisture migration caking. Advanced Powder Technology, 13 (4). pp. 411-424. (doi:10.1163/156855202320536043)

This list was generated on Fri Apr 20 11:09:08 2018 BST.