Items where Author is "Farnish, Richard J."
 | Up a level |
adhesion
Ermis, Ertan, Farnish, Richard J., Berry, Rob and Bradley, Michael S. A. (2008) Direct measurement of powder flavour adhesion on to a food surface using a novel adhesion tester. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 803-810. ISBN 9788272062896
annular wall friction tester
Bradley, Michael S.A., Berry, Rob, Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction tester and test procedure, suitable for equipment design and powder characterisation. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)
bio-powder
Ermis, Ertan, Farnish, Richard J., Berry, Rob and Bradley, Michael S. A. (2008) Direct measurement of powder flavour adhesion on to a food surface using a novel adhesion tester. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 803-810. ISBN 9788272062896
Biomass
Ton, Bram T., Farnish, Richard J. and Zigan, Stefan (2015) Resolving lateral segregation effects of static blenders. In: IV International Conference on Particle-Based Methods (PARTICLES 2015). International Centre for Numerical Methods in Engineering (CIMNE), Barcelona, Spain, pp. 714-721. ISBN 978-8494424472
breakage matrices
Deng, Tong
ORCID: 0000-0003-4117-4317
, Farnish, Richard J. and Bradley, Michael S.A.
(2008)
Evaluation of particle degradation due to high-speed impacts in a pneumatic handling system.
Particulate Science and Technology, 26 (5).
pp. 438-450.
ISSN 0272-6351 (Print), 1548-0046 (Online)
(doi:https://doi.org/10.1080/02726350802367522)
bulk particulates
Farnish, Richard J., Kulkarni, Prasanna and Bradley, Michael S. A. (2008) Segregation of bulk particulates through multiple process handling steps. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 505-510. ISBN 9788272062896
Bulk solids
Ribeiro, Kandice Suane Barros, Farnish, Richard J. and Coelho, Reginaldo Teixeira (2019) Evaluation of the Restricted Air Entry on the Discharge Rate from Silos. In: 25th ABCM International Congress of Mechanical Engineering, 20-25 October 2019, Uberlandia, MG, Brazil.
Bradley, Michael S.A., Farnish, Richard J., Reed, Alan R. and Kulkarni, Prasanna (2007) Evaluation of air induced segregation tendencies in pharmaceutical blends using a bench scale tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)
bulk solids handling
Berry, Rob, Bradley, Michael S.A., Farnish, Richard J. and Angulo Pinzon, O.A. (2008) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 344-350. ISBN 9788272062896
Bradley, Michael S.A., Berry, Rob, Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction tester and test procedure, suitable for equipment design and powder characterisation. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)
Bradley, Michael S. A., Berry, Rob, Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia. (Unpublished)
coating
Ermis, Ertan, Farnish, Richard J., Berry, Rob and Bradley, Michael S. A. (2008) Direct measurement of powder flavour adhesion on to a food surface using a novel adhesion tester. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 803-810. ISBN 9788272062896
crisps
Ermis, Ertan, Farnish, Richard J., Berry, Rob and Bradley, Michael S. A. (2008) Direct measurement of powder flavour adhesion on to a food surface using a novel adhesion tester. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 803-810. ISBN 9788272062896
Discharge rate
Ribeiro, Kandice Suane Barros, Farnish, Richard J. and Coelho, Reginaldo Teixeira (2019) Evaluation of the Restricted Air Entry on the Discharge Rate from Silos. In: 25th ABCM International Congress of Mechanical Engineering, 20-25 October 2019, Uberlandia, MG, Brazil.
dosators
Angulo Pinzon, O.A., Bradley, Michael, Berry, Robert and Farnish, Richard J. (2008) Modelling dosator filling and discharge of powder. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 586-591. ISBN 9788272062896
equipment design
Berry, Rob, Bradley, Michael S. A., Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction test procedure, suitable for equipment design and powder characterisation. In: ICBMH Conference: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, Australia. (Unpublished)
flavouring powder
Ermis, Ertan, Farnish, Richard J., Berry, Rob and Bradley, Michael S. A. (2008) Direct measurement of powder flavour adhesion on to a food surface using a novel adhesion tester. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 803-810. ISBN 9788272062896
Granular flow
Ribeiro, Kandice Suane Barros, Farnish, Richard J. and Coelho, Reginaldo Teixeira (2019) Evaluation of the Restricted Air Entry on the Discharge Rate from Silos. In: 25th ABCM International Congress of Mechanical Engineering, 20-25 October 2019, Uberlandia, MG, Brazil.
high-speed impacts
Deng, Tong
ORCID: 0000-0003-4117-4317
, Farnish, Richard J. and Bradley, Michael S.A.
(2008)
Evaluation of particle degradation due to high-speed impacts in a pneumatic handling system.
Particulate Science and Technology, 26 (5).
pp. 438-450.
ISSN 0272-6351 (Print), 1548-0046 (Online)
(doi:https://doi.org/10.1080/02726350802367522)
Jenike shear cell
Berry, Rob, Bradley, Michael S.A., Farnish, Richard J. and Angulo Pinzon, O.A. (2008) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 344-350. ISBN 9788272062896
Bradley, Michael S. A., Berry, Rob, Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia. (Unpublished)
Lean-phase
Kotzur, Benjamin A., Bradley, Michael S.A., Berry, Robert J. and Farnish, Richard J. (2016) Breakage characteristics of granulated food products for prediction of attrition during lean-phase pneumatic conveying. International Journal of Food Engineering, 12 (9). ISSN 1556-3758 (Print), 2194-5764 (Online) (doi:https://doi.org/10.1515/ijfe-2016-0045)
Mixing
Ton, Bram T., Farnish, Richard J. and Zigan, Stefan (2015) Resolving lateral segregation effects of static blenders. In: IV International Conference on Particle-Based Methods (PARTICLES 2015). International Centre for Numerical Methods in Engineering (CIMNE), Barcelona, Spain, pp. 714-721. ISBN 978-8494424472
Particle attrition
Kotzur, Benjamin A., Bradley, Michael S.A., Berry, Robert J. and Farnish, Richard J. (2016) Breakage characteristics of granulated food products for prediction of attrition during lean-phase pneumatic conveying. International Journal of Food Engineering, 12 (9). ISSN 1556-3758 (Print), 2194-5764 (Online) (doi:https://doi.org/10.1515/ijfe-2016-0045)
particle degradation
Deng, Tong
ORCID: 0000-0003-4117-4317
, Farnish, Richard J. and Bradley, Michael S.A.
(2008)
Evaluation of particle degradation due to high-speed impacts in a pneumatic handling system.
Particulate Science and Technology, 26 (5).
pp. 438-450.
ISSN 0272-6351 (Print), 1548-0046 (Online)
(doi:https://doi.org/10.1080/02726350802367522)
Pneumatic conveying
Kotzur, Benjamin A., Bradley, Michael S.A., Berry, Robert J. and Farnish, Richard J. (2016) Breakage characteristics of granulated food products for prediction of attrition during lean-phase pneumatic conveying. International Journal of Food Engineering, 12 (9). ISSN 1556-3758 (Print), 2194-5764 (Online) (doi:https://doi.org/10.1515/ijfe-2016-0045)
pneumatic conveyors
Deng, Tong
ORCID: 0000-0003-4117-4317
, Farnish, Richard J. and Bradley, Michael S.A.
(2008)
Evaluation of particle degradation due to high-speed impacts in a pneumatic handling system.
Particulate Science and Technology, 26 (5).
pp. 438-450.
ISSN 0272-6351 (Print), 1548-0046 (Online)
(doi:https://doi.org/10.1080/02726350802367522)
powder characterisation
Berry, Rob, Bradley, Michael S. A., Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction test procedure, suitable for equipment design and powder characterisation. In: ICBMH Conference: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, Australia. (Unpublished)
powders
Angulo Pinzon, O.A., Bradley, Michael, Berry, Robert and Farnish, Richard J. (2008) Modelling dosator filling and discharge of powder. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 586-591. ISBN 9788272062896
Segregation
Ton, Bram T., Farnish, Richard J. and Zigan, Stefan (2015) Resolving lateral segregation effects of static blenders. In: IV International Conference on Particle-Based Methods (PARTICLES 2015). International Centre for Numerical Methods in Engineering (CIMNE), Barcelona, Spain, pp. 714-721. ISBN 978-8494424472
Farnish, Richard J., Kulkarni, Prasanna and Bradley, Michael S. A. (2008) Segregation of bulk particulates through multiple process handling steps. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 505-510. ISBN 9788272062896
Bradley, Michael S.A., Farnish, Richard J., Reed, Alan R. and Kulkarni, Prasanna (2007) Evaluation of air induced segregation tendencies in pharmaceutical blends using a bench scale tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)
shear testers
Berry, Rob, Bradley, Michael S.A., Farnish, Richard J. and Angulo Pinzon, O.A. (2008) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 344-350. ISBN 9788272062896
Bradley, Michael S. A., Berry, Rob, Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia. (Unpublished)
Sustainable energies
Ton, Bram T., Farnish, Richard J. and Zigan, Stefan (2015) Resolving lateral segregation effects of static blenders. In: IV International Conference on Particle-Based Methods (PARTICLES 2015). International Centre for Numerical Methods in Engineering (CIMNE), Barcelona, Spain, pp. 714-721. ISBN 978-8494424472
Ventilation
Ribeiro, Kandice Suane Barros, Farnish, Richard J. and Coelho, Reginaldo Teixeira (2019) Evaluation of the Restricted Air Entry on the Discharge Rate from Silos. In: 25th ABCM International Congress of Mechanical Engineering, 20-25 October 2019, Uberlandia, MG, Brazil.