Skip navigation

Items where Author is "Desmulliez, M.P.Y."

Items where Author is "Desmulliez, M.P.Y."

Up a level
Export as [feed] RSS
Group by: Item Type | Uncontrolled Keywords | No Grouping
acoustic streaming adhesive bonding aspect ratio capillary chip scale packaging computer control systems conducting materials conversion efficiency cure data cure kinetics cure kinetics models cure process curing curing encapsulant materials curing of an encapsulant material curing process design differential scanning calorimetry (DSC) differential scanning calorimetry Differential Scanning Calorimetry (DSC) dual-section microwave system electrodeposition electrodeposition of copper electrohydrodynamic electrolyte fluid flow electromagnetic heating electronic packaging electronics packaging electroplating electrostatic encapsulant encapsulant curing encapsulants encapsulation estimate of cure evaluation fibre optic hydrophone fine-pitch technology fluid flow Fourier transform infra-red spectroscopy (FTIR) heating high aspect ratio microvias high-aspect ratio microfabrication hollow microstucture instabilities integrated circuit interconnections isotropic conductive adhesive materials materials megasonic agitation micro-particle imaging velocimetry (micro-PIV) microelectronics manufacturing microelectronics packaging microfluidics microwave microwave curing microwave devices microwave measurements microwave oven microwave ovens microwave theory and techniques nanopatterning numerical analysis numerical models numerical simulation open-ended microwave oven ovens packaging particle swarm optimisation algorithm particle swarm optimisation method particle swarm optimization polymer crosslinking polymer cure kinetics models polymer cure models polymeric channels printed circuit board (PCB) printing resonant cavity resonant microwave applicator solders stoves temperature measurement thermal stresses thermomechanical stress development thermosetting polymer Variable Frequency Microwave (VFM) system waveguide resonator
Number of items: 108.

acoustic streaming

Costello, S., Flynn, D., Kay, R.W., Desmulliez, M.P.Y., Strusevich, N., Patel, M.K., Bailey, C., Jones, A.C., Bennett, M., Price, D., Habeshaw, R., Demore, C. and Cochran, S. (2011) Electrodeposition of copper into PCB vias under megasonic agitation. In: MME 2011. Proceedings of the 22nd Micromechanics and Microsystems Technology Europe Workshop. MME2011, Norway, pp. 266-269. ISBN 9788278602249

adhesive bonding

Desmulliez, M.P.Y., Kay, R.W., Stoyanov, S. and Bailey, C. (2004) Stencil printing at sub-100 microns pitch. In: Proceedings of 6th Electronics Packaging Technology Conference (EPTC 2004). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 354-358. ISBN 0780388216 (doi:10.1109/EPTC.2004.1396633)

Desmulliez, M.P.Y., Kay, R.W., Stoyanov, S. and Bailey, C. (2004) Stencil printing at sub-100 microns pitch. In: Proceedings of 6th Electronics Packaging Technology Conference (EPTC 2004). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 354-358. ISBN 0780388216 (doi:10.1109/EPTC.2004.1396633)

aspect ratio

Costello, S., Flynn, D., Kay, R.W., Desmulliez, M.P.Y., Strusevich, N., Patel, M.K., Bailey, C., Jones, A.C., Bennett, M., Price, D., Habeshaw, R., Demore, C. and Cochran, S. (2011) Electrodeposition of copper into PCB vias under megasonic agitation. In: MME 2011. Proceedings of the 22nd Micromechanics and Microsystems Technology Europe Workshop. MME2011, Norway, pp. 266-269. ISBN 9788278602249

capillary

Chen, H., Yu, W., Cargill, S., Patel, M.K., Bailey, C., Tonry, C. and Desmulliez, M.P.Y. (2012) Self-encapsulated hollow microstructures formed by electric field-assisted capillarity. Microfluidics and Nanofluidics, 13 (1). pp. 75-82. ISSN 1613-4982 (Print), 1613-4990 (Online) (doi:10.1007/s10404-012-0942-6)

chip scale packaging

Desmulliez, M.P.Y., Kay, R.W., Stoyanov, S. and Bailey, C. (2004) Stencil printing at sub-100 microns pitch. In: Proceedings of 6th Electronics Packaging Technology Conference (EPTC 2004). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 354-358. ISBN 0780388216 (doi:10.1109/EPTC.2004.1396633)

Desmulliez, M.P.Y., Kay, R.W., Stoyanov, S. and Bailey, C. (2004) Stencil printing at sub-100 microns pitch. In: Proceedings of 6th Electronics Packaging Technology Conference (EPTC 2004). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 354-358. ISBN 0780388216 (doi:10.1109/EPTC.2004.1396633)

computer control systems

Pavuluri, S.K., Tilford, T., Goussetis, G., Desmulliez, M.P.Y., Ferenets, M., Adamietz, R., Eicher, F. and Bailey, C. (2010) Advances in the design and test of a novel open ended microwave oven. In: Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, DTIP 2010. IEEE Computer Society, Piscataway, USA, pp. 247-252. ISBN 9781424466368 (Print), 9782355000119 (Online)

conducting materials

Desmulliez, M.P.Y., Kay, R.W., Stoyanov, S. and Bailey, C. (2004) Stencil printing at sub-100 microns pitch. In: Proceedings of 6th Electronics Packaging Technology Conference (EPTC 2004). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 354-358. ISBN 0780388216 (doi:10.1109/EPTC.2004.1396633)

Desmulliez, M.P.Y., Kay, R.W., Stoyanov, S. and Bailey, C. (2004) Stencil printing at sub-100 microns pitch. In: Proceedings of 6th Electronics Packaging Technology Conference (EPTC 2004). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 354-358. ISBN 0780388216 (doi:10.1109/EPTC.2004.1396633)

conversion efficiency

Pavuluri, S.K., Tilford, T., Goussetis, G., Desmulliez, M.P.Y., Ferenets, M., Adamietz, R., Eicher, F. and Bailey, C. (2010) Advances in the design and test of a novel open ended microwave oven. In: Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, DTIP 2010. IEEE Computer Society, Piscataway, USA, pp. 247-252. ISBN 9781424466368 (Print), 9782355000119 (Online)

cure data

Tilford, T., Morris, J.E., Ferenets, M., Rajaguru, P.R., Pavuluri, S.K., Desmulliez, M.P.Y. and Bailey, C. (2010) On model fitting methods for modeling polymer cure kinetics in microelectronics assembly applications. In: Electronics System Integration Technology Conference, ESTC 2010 - Proceedings. IEEE Computer Society, Piscataway, USA, pp. 1-6. ISBN 9781424485536 (Print), 9781424485543 (Online) (doi:10.1109/ESTC.2010.5642820)

cure kinetics

Tilford, T., Morris, J.E., Ferenets, M., Rajaguru, P.R., Pavuluri, S.K., Desmulliez, M.P.Y. and Bailey, C. (2010) On model fitting methods for modeling polymer cure kinetics in microelectronics assembly applications. In: Electronics System Integration Technology Conference, ESTC 2010 - Proceedings. IEEE Computer Society, Piscataway, USA, pp. 1-6. ISBN 9781424485536 (Print), 9781424485543 (Online) (doi:10.1109/ESTC.2010.5642820)

Tilford, T., Ferenets, M., Morris, J., Rajaguru, P.R., Pavuluri, S., Desmulliez, M.P.Y. and Bailey, C. (2010) Evaluation of polymer cure models in microelectronics packaging applications. In: International Conference on Electronics Packaging (ICEP2010), 12-14 May 2010, Sapporo, Hokkaido, Japan. (Unpublished)

cure kinetics models

Tilford, T., Morris, J.E., Ferenets, M., Rajaguru, P.R., Pavuluri, S., Desmulliez, M.P.Y. and Bailey, C. (2010) Numerical analysis of polymer cure kinetics in isotropic conductive adhesives. In: 33rd International Spring Seminar on Electronics Technology (ISSE), 2010. Polymer Electronics and Nanotechnologies: Towards System Integration . IEEE Xplore, Sovereign House, London, N3 1QB, UK, pp. 412-416. ISBN 978-1-4244-7849-1 (print), 978-1-4244-7850-7 (e-ISBN) (doi:10.1109/ISSE.2010.5547360)

cure process

Tilford, T., Sinclair, K.I., Goussetis, G., Bailey, C., Desmulliez, M.P.Y., Parrott, A.K. and Sangster, A.J. (2008) Numerical analysis of thermal stresses induced during VFM encapsulant curing. In: 31st International Spring Seminar on Electronics Technology, 2008. ISSE '08. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 348-353. ISBN 978-1-4244-3972-0 (doi:10.1109/ISSE.2008.5276666)

curing

Pavuluri, S.K., Desmulliez, M.P.Y., Goussetis, G., Arrighi, V., Johnston, K., Adamietz, R., Tilford, T. and Bailey, C. (2012) Post cure behaviour of ancapsulants for QFN packages processed by an open-ended single mode resonant microwave applicator. In: Electronics Packaging Technology Conference (EPTC), 2011 13th. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 573-578. ISBN 978-1-4577-1983-7 (Print), 978-1-4577-1981-3 (Online) (doi:10.1109/EPTC.2011.6184486)

Pavuluri, S.K., Ferenets, M., Goussetis, G., Desmulliez, M.P.Y., Tilford, T., Adamietz, R., Muller, G., Eicher, F. and Bailey, C. (2010) Experimental investigation of open-ended microwave oven assisted encapsulation process. In: Electronics System Integration Technology Conference, ESTC 2010 - Proceedings. IEEE Computer Society, Piscataway, NJ, USA, pp. 1-6. ISBN 978-1-4244-8553-6 (print), 978-1-4244-8554-3 (online) (doi:10.1109/ESTC.2010.5643015)

curing encapsulant materials

Adamietz, R., Tilford, T., Ferenets, M., Desmulliez, M.P.Y., Muller, G., Othman, N and Eicher, F. (2010) Modular microwave-based system for packaging applications. In: International Conference on Electronics Packaging (ICEP2010), 12-14 May 2010, Sapporo, Hokkaido, Japan. (Unpublished)

curing of an encapsulant material

Tilford, T., Ferenets, M., Adamietz, R., Pavuluri, S., Morris, J.E., Desmulliez, M.P.Y. and Bailey, C. (2010) Numerical analysis of microwave-assisted encapsulation processes for ball grid array packages. In: International Microwave Power Institute’s 44th Annual Symposium: 2010 Proceedings. International Microwave Power Institute (IMPI), Mechanicsville, VA, USA, pp. 30-35. ISSN 1070-0129

curing process

Tilford, T., Ferenets, M., Adamietz, R., Pavuluri, S.K., Morris, J.E., Desmulliez, M.P.Y. and Bailey, C. (2010) Numerical analysis of microwave underfill cure in ball-grid packages. In: Electronics System Integration Technology Conference, ESTC 2010 - Proceedings. IEEE Computer Society, Piscataway, USA, pp. 1-6. ISBN 9781424485536 (Print), 9781424485543 (Online) (doi:10.1109/ESTC.2010.5642822)

Tilford, T., Ferenets, M., Morris, J.E., Krumme, A., Pavuluri, S., Rajaguru, P.R., Desmulliez, M.P.Y. and Bailey, C. (2010) Application of particle swarm optimisation to evaluation of polymer cure kinetics models. Journal of Algorithms & Computational Technology, 4 (1). pp. 121-146. ISSN 1748-3018 (doi:10.1260/1748-3018.4.1.121)

design

Pavuluri, S.K., Tilford, T., Goussetis, G., Desmulliez, M.P.Y., Ferenets, M., Adamietz, R., Eicher, F. and Bailey, C. (2010) Advances in the design and test of a novel open ended microwave oven. In: Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, DTIP 2010. IEEE Computer Society, Piscataway, USA, pp. 247-252. ISBN 9781424466368 (Print), 9782355000119 (Online)

differential scanning calorimetry (DSC)

Morris, J.E., Tilford, T., Bailey, C., Sinclair, K.I. and Desmulliez, M.P.Y. (2009) Polymer cure modeling for microelectronics applications. In: 32nd International Spring Seminar on Electronics Technology, 2009. ISSE 2009. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA. ISBN 978-1-4244-4260-7 (print) (doi:10.1109/ISSE.2009.5206929)

differential scanning calorimetry

Pavuluri, S.K., Tilford, T., Goussetis, G., Desmulliez, M.P.Y., Ferenets, M., Adamietz, R., Eicher, F. and Bailey, C. (2010) Advances in the design and test of a novel open ended microwave oven. In: Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, DTIP 2010. IEEE Computer Society, Piscataway, USA, pp. 247-252. ISBN 9781424466368 (Print), 9782355000119 (Online)

Tilford, T., Ferenets, M., Morris, J., Rajaguru, P.R., Pavuluri, S., Desmulliez, M.P.Y. and Bailey, C. (2010) Evaluation of polymer cure models in microelectronics packaging applications. In: International Conference on Electronics Packaging (ICEP2010), 12-14 May 2010, Sapporo, Hokkaido, Japan. (Unpublished)

Differential Scanning Calorimetry (DSC)

Tilford, T., Morris, J.E., Ferenets, M., Rajaguru, P.R., Pavuluri, S., Desmulliez, M.P.Y. and Bailey, C. (2010) Numerical analysis of polymer cure kinetics in isotropic conductive adhesives. In: 33rd International Spring Seminar on Electronics Technology (ISSE), 2010. Polymer Electronics and Nanotechnologies: Towards System Integration . IEEE Xplore, Sovereign House, London, N3 1QB, UK, pp. 412-416. ISBN 978-1-4244-7849-1 (print), 978-1-4244-7850-7 (e-ISBN) (doi:10.1109/ISSE.2010.5547360)

dual-section microwave system

Tilford, T., Ferenets, M., Adamietz, R., Pavuluri, S., Morris, J.E., Desmulliez, M.P.Y. and Bailey, C. (2010) Numerical analysis of microwave-assisted encapsulation processes for ball grid array packages. In: International Microwave Power Institute’s 44th Annual Symposium: 2010 Proceedings. International Microwave Power Institute (IMPI), Mechanicsville, VA, USA, pp. 30-35. ISSN 1070-0129

electrodeposition

Costello, S., Strusevich, N., Flyyn, D., Kay, R.W., Patel, M.K., Bailey, C., Price, D., Bennet, M., Jones, A.C. and Desmulliez, M.P.Y. (2012) Electrodeposition of copper into high aspect ratio PCB micro-via using megasonic agitation. In: DTIP 2012 Conference 2012: Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS. EDA Publishing Association, Grenoble, France, pp. 98-102. ISBN 9782355000201

Costello, S., Flynn, D., Kay, R.W., Desmulliez, M.P.Y., Strusevich, N., Patel, M.K., Bailey, C., Jones, A.C., Bennett, M., Price, D., Habeshaw, R., Demore, C. and Cochran, S. (2011) Electrodeposition of copper into PCB vias under megasonic agitation. In: MME 2011. Proceedings of the 22nd Micromechanics and Microsystems Technology Europe Workshop. MME2011, Norway, pp. 266-269. ISBN 9788278602249

electrodeposition of copper

Costello, S., Strusevich, N., Flynn, D., Kay, R.W., Patel, M.K., Bailey, C., Price, D., Bennet, M., Jones, A.C. and Desmulliez, M.P.Y. (2013) Electrodeposition of copper into high aspect ratio PCB micro-via using megasonic agitation. Microsystem Technologies, 19 (6). pp. 783-790. ISSN 0946-7076 (Print), 1432-1858 (Online) (doi:10.1007/s00542-013-1746-7)

Costello, S., Strusevich, N., Flyyn, D., Kay, R.W., Patel, M.K., Bailey, C., Price, D., Bennet, M., Jones, A.C. and Desmulliez, M.P.Y. (2012) Electrodeposition of copper into high aspect ratio PCB micro-via using megasonic agitation. In: DTIP 2012 Conference 2012: Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS. EDA Publishing Association, Grenoble, France, pp. 98-102. ISBN 9782355000201

electrohydrodynamic

Chen, H., Yu, W., Cargill, S., Patel, M.K., Bailey, C., Tonry, C. and Desmulliez, M.P.Y. (2012) Self-encapsulated hollow microstructures formed by electric field-assisted capillarity. Microfluidics and Nanofluidics, 13 (1). pp. 75-82. ISSN 1613-4982 (Print), 1613-4990 (Online) (doi:10.1007/s10404-012-0942-6)

electrolyte fluid flow

Costello, S., Strusevich, N., Patel, M.K., Bailey, C., Flynn, D., Kay, R.W., Price, D., Bennett, M., Jones, A.C., Habeshaw, R., Demore, C., Cochran, S. and Desmulliez, M.P.Y. (2011) Characterisation of ion transportation during electroplating of high aspect ratio microvias using megasonic agitation. In: EMPC-2011: 18th European Microelectronics and Packaging Conference. Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 1-7. ISBN 9780956808606

electromagnetic heating

Pavuluri, S.K., Desmulliez, M.P.Y., Goussetis, G., Arrighi, V., Johnston, K., Adamietz, R., Tilford, T. and Bailey, C. (2012) Post cure behaviour of ancapsulants for QFN packages processed by an open-ended single mode resonant microwave applicator. In: Electronics Packaging Technology Conference (EPTC), 2011 13th. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 573-578. ISBN 978-1-4577-1983-7 (Print), 978-1-4577-1981-3 (Online) (doi:10.1109/EPTC.2011.6184486)

Pavuluri, S.K., Ferenets, M., Goussetis, G., Desmulliez, M.P.Y., Tilford, T., Adamietz, R., Muller, G., Eicher, F. and Bailey, C. (2012) Encapsulation of microelectronic components using open-ended microwave oven. IEEE Transactions on Components, Packaging and Manufacturing Technology, 2 (5). pp. 799-806. ISSN 2156-3950 (doi:10.1109/TCPMT.2011.2177524)

electronic packaging

Tilford, T., Ferenets, M., Adamietz, R., Pavuluri, S., Morris, J.E., Desmulliez, M.P.Y. and Bailey, C. (2010) Numerical analysis of microwave-assisted encapsulation processes for ball grid array packages. In: International Microwave Power Institute’s 44th Annual Symposium: 2010 Proceedings. International Microwave Power Institute (IMPI), Mechanicsville, VA, USA, pp. 30-35. ISSN 1070-0129

electronics packaging

Adamietz, R., Tilford, T., Ferenets, M., Desmulliez, M.P.Y., Muller, G., Othman, N and Eicher, F. (2010) Modular microwave-based system for packaging applications. In: International Conference on Electronics Packaging (ICEP2010), 12-14 May 2010, Sapporo, Hokkaido, Japan. (Unpublished)

electroplating

Costello, S., Flynn, D., Kay, R.W., Desmulliez, M.P.Y., Strusevich, N., Patel, M.K., Bailey, C., Jones, A.C., Bennett, M., Price, D., Habeshaw, R., Demore, C. and Cochran, S. (2011) Electrodeposition of copper into PCB vias under megasonic agitation. In: MME 2011. Proceedings of the 22nd Micromechanics and Microsystems Technology Europe Workshop. MME2011, Norway, pp. 266-269. ISBN 9788278602249

electrostatic

Li, H., Yu, W., Zhang, L., Liu, Z., Brown, K.E., Abraham, E., Cargill, S., Tonry, C., Patel, M.K., Bailey, C. and Desmulliez, M.P.Y. (2013) Simulation and modelling of sub-30 nm polymeric channels fabricated by electrostatic induced lithography. RSC Advances, 3 (29). pp. 11839-11845. ISSN 2046-2069 (doi:10.1039/c3ra40188j)

encapsulant

Tilford, T., Sinclair, K.I., Goussetis, G., Bailey, C., Desmulliez, M.P.Y., Parrott, A.K. and Sangster, A.J. (2008) Numerical analysis of thermal stresses induced during VFM encapsulant curing. In: 31st International Spring Seminar on Electronics Technology, 2008. ISSE '08. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 348-353. ISBN 978-1-4244-3972-0 (doi:10.1109/ISSE.2008.5276666)

encapsulant curing

Tilford, T., Sinclair, K.I., Goussetis, G., Bailey, C., Desmulliez, M.P.Y., Parrott, A.K. and Sangster, A.J. (2008) Numerical simulation of encapsulant curing within a variable frequency microwave processing system. In: Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Micro-Systems, 2008. EuroSimE 2008. International Conference on. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 447-454. ISBN 978-1-4244-2127-5 (doi:10.1109/ESIME.2008.4525086)

encapsulants

Pavuluri, S.K., Desmulliez, M.P.Y., Goussetis, G., Arrighi, V., Johnston, K., Adamietz, R., Tilford, T. and Bailey, C. (2012) Post cure behaviour of ancapsulants for QFN packages processed by an open-ended single mode resonant microwave applicator. In: Electronics Packaging Technology Conference (EPTC), 2011 13th. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 573-578. ISBN 978-1-4577-1983-7 (Print), 978-1-4577-1981-3 (Online) (doi:10.1109/EPTC.2011.6184486)

encapsulation

Pavuluri, S.K., Ferenets, M., Goussetis, G., Desmulliez, M.P.Y., Tilford, T., Adamietz, R., Muller, G., Eicher, F. and Bailey, C. (2012) Encapsulation of microelectronic components using open-ended microwave oven. IEEE Transactions on Components, Packaging and Manufacturing Technology, 2 (5). pp. 799-806. ISSN 2156-3950 (doi:10.1109/TCPMT.2011.2177524)

estimate of cure

Tilford, T., Ferenets, M., Morris, J., Rajaguru, P.R., Pavuluri, S., Desmulliez, M.P.Y. and Bailey, C. (2010) Evaluation of polymer cure models in microelectronics packaging applications. In: International Conference on Electronics Packaging (ICEP2010), 12-14 May 2010, Sapporo, Hokkaido, Japan. (Unpublished)

evaluation

Tilford, T., Ferenets, M., Morris, J.E., Krumme, A., Pavuluri, S., Rajaguru, P.R., Desmulliez, M.P.Y. and Bailey, C. (2010) Application of particle swarm optimisation to evaluation of polymer cure kinetics models. Journal of Algorithms & Computational Technology, 4 (1). pp. 121-146. ISSN 1748-3018 (doi:10.1260/1748-3018.4.1.121)

fibre optic hydrophone

Costello, S., Strusevich, N., Patel, M.K., Bailey, C., Flynn, D., Kay, R.W., Price, D., Bennett, M., Jones, A.C., Habeshaw, R., Demore, C., Cochran, S. and Desmulliez, M.P.Y. (2011) Characterisation of ion transportation during electroplating of high aspect ratio microvias using megasonic agitation. In: EMPC-2011: 18th European Microelectronics and Packaging Conference. Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 1-7. ISBN 9780956808606

fine-pitch technology

Desmulliez, M.P.Y., Kay, R.W., Stoyanov, S. and Bailey, C. (2004) Stencil printing at sub-100 microns pitch. In: Proceedings of 6th Electronics Packaging Technology Conference (EPTC 2004). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 354-358. ISBN 0780388216 (doi:10.1109/EPTC.2004.1396633)

Desmulliez, M.P.Y., Kay, R.W., Stoyanov, S. and Bailey, C. (2004) Stencil printing at sub-100 microns pitch. In: Proceedings of 6th Electronics Packaging Technology Conference (EPTC 2004). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 354-358. ISBN 0780388216 (doi:10.1109/EPTC.2004.1396633)

fluid flow

Costello, S., Strusevich, N., Flynn, D., Kay, R.W., Patel, M.K., Bailey, C., Price, D., Bennet, M., Jones, A.C. and Desmulliez, M.P.Y. (2013) Electrodeposition of copper into high aspect ratio PCB micro-via using megasonic agitation. Microsystem Technologies, 19 (6). pp. 783-790. ISSN 0946-7076 (Print), 1432-1858 (Online) (doi:10.1007/s00542-013-1746-7)

Costello, S., Strusevich, N., Flyyn, D., Kay, R.W., Patel, M.K., Bailey, C., Price, D., Bennet, M., Jones, A.C. and Desmulliez, M.P.Y. (2012) Electrodeposition of copper into high aspect ratio PCB micro-via using megasonic agitation. In: DTIP 2012 Conference 2012: Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS. EDA Publishing Association, Grenoble, France, pp. 98-102. ISBN 9782355000201

Fourier transform infra-red spectroscopy (FTIR)

Morris, J.E., Tilford, T., Bailey, C., Sinclair, K.I. and Desmulliez, M.P.Y. (2009) Polymer cure modeling for microelectronics applications. In: 32nd International Spring Seminar on Electronics Technology, 2009. ISSE 2009. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA. ISBN 978-1-4244-4260-7 (print) (doi:10.1109/ISSE.2009.5206929)

heating

Pavuluri, S.K., Tilford, T., Goussetis, G., Desmulliez, M.P.Y., Ferenets, M., Adamietz, R., Eicher, F. and Bailey, C. (2010) Advances in the design and test of a novel open ended microwave oven. In: Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, DTIP 2010. IEEE Computer Society, Piscataway, USA, pp. 247-252. ISBN 9781424466368 (Print), 9782355000119 (Online)

Sinclair, K.I., Goussetis, G., Desmulliez, M.P.Y., Sangster, A.J., Tilford, T., Bailey, C. and Parrott, A.K. (2008) Optimization of an open-ended microwave oven for microelectronics packaging. IEEE Transactions on Microwave Theory and Techniques, 56 (11). pp. 2635-2641. ISSN 0018-9480 (doi:10.1109/TMTT.2008.2005925)

high aspect ratio microvias

Costello, S., Strusevich, N., Patel, M.K., Bailey, C., Flynn, D., Kay, R.W., Price, D., Bennett, M., Jones, A.C., Habeshaw, R., Demore, C., Cochran, S. and Desmulliez, M.P.Y. (2011) Characterisation of ion transportation during electroplating of high aspect ratio microvias using megasonic agitation. In: EMPC-2011: 18th European Microelectronics and Packaging Conference. Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 1-7. ISBN 9780956808606

high-aspect ratio microfabrication

Chen, H., Yu, W., Cargill, S., Patel, M.K., Bailey, C., Tonry, C. and Desmulliez, M.P.Y. (2012) Self-encapsulated hollow microstructures formed by electric field-assisted capillarity. Microfluidics and Nanofluidics, 13 (1). pp. 75-82. ISSN 1613-4982 (Print), 1613-4990 (Online) (doi:10.1007/s10404-012-0942-6)

hollow microstucture

Chen, H., Yu, W., Cargill, S., Patel, M.K., Bailey, C., Tonry, C. and Desmulliez, M.P.Y. (2012) Self-encapsulated hollow microstructures formed by electric field-assisted capillarity. Microfluidics and Nanofluidics, 13 (1). pp. 75-82. ISSN 1613-4982 (Print), 1613-4990 (Online) (doi:10.1007/s10404-012-0942-6)

instabilities

Chen, H., Yu, W., Cargill, S., Patel, M.K., Bailey, C., Tonry, C. and Desmulliez, M.P.Y. (2012) Self-encapsulated hollow microstructures formed by electric field-assisted capillarity. Microfluidics and Nanofluidics, 13 (1). pp. 75-82. ISSN 1613-4982 (Print), 1613-4990 (Online) (doi:10.1007/s10404-012-0942-6)

integrated circuit interconnections

Desmulliez, M.P.Y., Kay, R.W., Stoyanov, S. and Bailey, C. (2004) Stencil printing at sub-100 microns pitch. In: Proceedings of 6th Electronics Packaging Technology Conference (EPTC 2004). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 354-358. ISBN 0780388216 (doi:10.1109/EPTC.2004.1396633)

Desmulliez, M.P.Y., Kay, R.W., Stoyanov, S. and Bailey, C. (2004) Stencil printing at sub-100 microns pitch. In: Proceedings of 6th Electronics Packaging Technology Conference (EPTC 2004). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 354-358. ISBN 0780388216 (doi:10.1109/EPTC.2004.1396633)

isotropic conductive adhesive materials

Tilford, T., Morris, J.E., Ferenets, M., Rajaguru, P.R., Pavuluri, S., Desmulliez, M.P.Y. and Bailey, C. (2010) Numerical analysis of polymer cure kinetics in isotropic conductive adhesives. In: 33rd International Spring Seminar on Electronics Technology (ISSE), 2010. Polymer Electronics and Nanotechnologies: Towards System Integration . IEEE Xplore, Sovereign House, London, N3 1QB, UK, pp. 412-416. ISBN 978-1-4244-7849-1 (print), 978-1-4244-7850-7 (e-ISBN) (doi:10.1109/ISSE.2010.5547360)

materials

Pavuluri, S.K., Desmulliez, M.P.Y., Goussetis, G., Arrighi, V., Johnston, K., Adamietz, R., Tilford, T. and Bailey, C. (2012) Post cure behaviour of ancapsulants for QFN packages processed by an open-ended single mode resonant microwave applicator. In: Electronics Packaging Technology Conference (EPTC), 2011 13th. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 573-578. ISBN 978-1-4577-1983-7 (Print), 978-1-4577-1981-3 (Online) (doi:10.1109/EPTC.2011.6184486)

megasonic agitation

Costello, S., Strusevich, N., Flynn, D., Kay, R.W., Patel, M.K., Bailey, C., Price, D., Bennet, M., Jones, A.C. and Desmulliez, M.P.Y. (2013) Electrodeposition of copper into high aspect ratio PCB micro-via using megasonic agitation. Microsystem Technologies, 19 (6). pp. 783-790. ISSN 0946-7076 (Print), 1432-1858 (Online) (doi:10.1007/s00542-013-1746-7)

Costello, S., Strusevich, N., Flyyn, D., Kay, R.W., Patel, M.K., Bailey, C., Price, D., Bennet, M., Jones, A.C. and Desmulliez, M.P.Y. (2012) Electrodeposition of copper into high aspect ratio PCB micro-via using megasonic agitation. In: DTIP 2012 Conference 2012: Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS. EDA Publishing Association, Grenoble, France, pp. 98-102. ISBN 9782355000201

Costello, S., Flynn, D., Kay, R.W., Desmulliez, M.P.Y., Strusevich, N., Patel, M.K., Bailey, C., Jones, A.C., Bennett, M., Price, D., Habeshaw, R., Demore, C. and Cochran, S. (2011) Electrodeposition of copper into PCB vias under megasonic agitation. In: MME 2011. Proceedings of the 22nd Micromechanics and Microsystems Technology Europe Workshop. MME2011, Norway, pp. 266-269. ISBN 9788278602249

micro-particle imaging velocimetry (micro-PIV)

Costello, S., Strusevich, N., Flynn, D., Kay, R.W., Patel, M.K., Bailey, C., Price, D., Bennet, M., Jones, A.C. and Desmulliez, M.P.Y. (2013) Electrodeposition of copper into high aspect ratio PCB micro-via using megasonic agitation. Microsystem Technologies, 19 (6). pp. 783-790. ISSN 0946-7076 (Print), 1432-1858 (Online) (doi:10.1007/s00542-013-1746-7)

Costello, S., Strusevich, N., Flyyn, D., Kay, R.W., Patel, M.K., Bailey, C., Price, D., Bennet, M., Jones, A.C. and Desmulliez, M.P.Y. (2012) Electrodeposition of copper into high aspect ratio PCB micro-via using megasonic agitation. In: DTIP 2012 Conference 2012: Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS. EDA Publishing Association, Grenoble, France, pp. 98-102. ISBN 9782355000201

Costello, S., Strusevich, N., Patel, M.K., Bailey, C., Flynn, D., Kay, R.W., Price, D., Bennett, M., Jones, A.C., Habeshaw, R., Demore, C., Cochran, S. and Desmulliez, M.P.Y. (2011) Characterisation of ion transportation during electroplating of high aspect ratio microvias using megasonic agitation. In: EMPC-2011: 18th European Microelectronics and Packaging Conference. Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 1-7. ISBN 9780956808606

microelectronics manufacturing

Tilford, T., Ferenets, M., Morris, J.E., Krumme, A., Pavuluri, S., Rajaguru, P.R., Desmulliez, M.P.Y. and Bailey, C. (2010) Application of particle swarm optimisation to evaluation of polymer cure kinetics models. Journal of Algorithms & Computational Technology, 4 (1). pp. 121-146. ISSN 1748-3018 (doi:10.1260/1748-3018.4.1.121)

microelectronics packaging

Morris, J.E., Tilford, T., Bailey, C., Sinclair, K.I. and Desmulliez, M.P.Y. (2009) Polymer cure modeling for microelectronics applications. In: 32nd International Spring Seminar on Electronics Technology, 2009. ISSE 2009. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA. ISBN 978-1-4244-4260-7 (print) (doi:10.1109/ISSE.2009.5206929)

microfluidics

Chen, H., Yu, W., Cargill, S., Patel, M.K., Bailey, C., Tonry, C. and Desmulliez, M.P.Y. (2012) Self-encapsulated hollow microstructures formed by electric field-assisted capillarity. Microfluidics and Nanofluidics, 13 (1). pp. 75-82. ISSN 1613-4982 (Print), 1613-4990 (Online) (doi:10.1007/s10404-012-0942-6)

microwave

Tilford, T., Ferenets, M., Adamietz, R., Pavuluri, S., Morris, J.E., Desmulliez, M.P.Y. and Bailey, C. (2010) Numerical analysis of microwave-assisted encapsulation processes for ball grid array packages. In: International Microwave Power Institute’s 44th Annual Symposium: 2010 Proceedings. International Microwave Power Institute (IMPI), Mechanicsville, VA, USA, pp. 30-35. ISSN 1070-0129

microwave curing

Sinclair, K.I., Goussetis, G., Desmulliez, M.P.Y., Sangster, A.J., Tilford, T., Bailey, C. and Parrott, A.K. (2008) Optimization of an open-ended microwave oven for microelectronics packaging. IEEE Transactions on Microwave Theory and Techniques, 56 (11). pp. 2635-2641. ISSN 0018-9480 (doi:10.1109/TMTT.2008.2005925)

microwave devices

Pavuluri, S.K., Tilford, T., Goussetis, G., Desmulliez, M.P.Y., Ferenets, M., Adamietz, R., Eicher, F. and Bailey, C. (2010) Advances in the design and test of a novel open ended microwave oven. In: Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, DTIP 2010. IEEE Computer Society, Piscataway, USA, pp. 247-252. ISBN 9781424466368 (Print), 9782355000119 (Online)

microwave measurements

Pavuluri, S.K., Desmulliez, M.P.Y., Goussetis, G., Arrighi, V., Johnston, K., Adamietz, R., Tilford, T. and Bailey, C. (2012) Post cure behaviour of ancapsulants for QFN packages processed by an open-ended single mode resonant microwave applicator. In: Electronics Packaging Technology Conference (EPTC), 2011 13th. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 573-578. ISBN 978-1-4577-1983-7 (Print), 978-1-4577-1981-3 (Online) (doi:10.1109/EPTC.2011.6184486)

microwave oven

Tilford, T., Ferenets, M., Adamietz, R., Pavuluri, S.K., Morris, J.E., Desmulliez, M.P.Y. and Bailey, C. (2010) Numerical analysis of microwave underfill cure in ball-grid packages. In: Electronics System Integration Technology Conference, ESTC 2010 - Proceedings. IEEE Computer Society, Piscataway, USA, pp. 1-6. ISBN 9781424485536 (Print), 9781424485543 (Online) (doi:10.1109/ESTC.2010.5642822)

microwave ovens

Pavuluri, S.K., Desmulliez, M.P.Y., Goussetis, G., Arrighi, V., Johnston, K., Adamietz, R., Tilford, T. and Bailey, C. (2012) Post cure behaviour of ancapsulants for QFN packages processed by an open-ended single mode resonant microwave applicator. In: Electronics Packaging Technology Conference (EPTC), 2011 13th. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 573-578. ISBN 978-1-4577-1983-7 (Print), 978-1-4577-1981-3 (Online) (doi:10.1109/EPTC.2011.6184486)

microwave theory and techniques

Pavuluri, S.K., Desmulliez, M.P.Y., Goussetis, G., Arrighi, V., Johnston, K., Adamietz, R., Tilford, T. and Bailey, C. (2012) Post cure behaviour of ancapsulants for QFN packages processed by an open-ended single mode resonant microwave applicator. In: Electronics Packaging Technology Conference (EPTC), 2011 13th. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 573-578. ISBN 978-1-4577-1983-7 (Print), 978-1-4577-1981-3 (Online) (doi:10.1109/EPTC.2011.6184486)

nanopatterning

Li, H., Yu, W., Zhang, L., Liu, Z., Brown, K.E., Abraham, E., Cargill, S., Tonry, C., Patel, M.K., Bailey, C. and Desmulliez, M.P.Y. (2013) Simulation and modelling of sub-30 nm polymeric channels fabricated by electrostatic induced lithography. RSC Advances, 3 (29). pp. 11839-11845. ISSN 2046-2069 (doi:10.1039/c3ra40188j)

numerical analysis

Tilford, T., Sinclair, K.I., Goussetis, G., Bailey, C., Desmulliez, M.P.Y., Parrott, A.K. and Sangster, A.J. (2008) Numerical analysis of thermal stresses induced during VFM encapsulant curing. In: 31st International Spring Seminar on Electronics Technology, 2008. ISSE '08. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 348-353. ISBN 978-1-4244-3972-0 (doi:10.1109/ISSE.2008.5276666)

numerical models

Tilford, T., Ferenets, M., Morris, J.E., Krumme, A., Pavuluri, S., Rajaguru, P.R., Desmulliez, M.P.Y. and Bailey, C. (2010) Application of particle swarm optimisation to evaluation of polymer cure kinetics models. Journal of Algorithms & Computational Technology, 4 (1). pp. 121-146. ISSN 1748-3018 (doi:10.1260/1748-3018.4.1.121)

numerical simulation

Tilford, T., Sinclair, K.I., Goussetis, G., Bailey, C., Desmulliez, M.P.Y., Parrott, A.K. and Sangster, A.J. (2008) Numerical simulation of encapsulant curing within a variable frequency microwave processing system. In: Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Micro-Systems, 2008. EuroSimE 2008. International Conference on. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 447-454. ISBN 978-1-4244-2127-5 (doi:10.1109/ESIME.2008.4525086)

open-ended microwave oven

Pavuluri, S.K., Ferenets, M., Goussetis, G., Desmulliez, M.P.Y., Tilford, T., Adamietz, R., Muller, G., Eicher, F. and Bailey, C. (2010) Experimental investigation of open-ended microwave oven assisted encapsulation process. In: Electronics System Integration Technology Conference, ESTC 2010 - Proceedings. IEEE Computer Society, Piscataway, NJ, USA, pp. 1-6. ISBN 978-1-4244-8553-6 (print), 978-1-4244-8554-3 (online) (doi:10.1109/ESTC.2010.5643015)

ovens

Pavuluri, S.K., Tilford, T., Goussetis, G., Desmulliez, M.P.Y., Ferenets, M., Adamietz, R., Eicher, F. and Bailey, C. (2010) Advances in the design and test of a novel open ended microwave oven. In: Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, DTIP 2010. IEEE Computer Society, Piscataway, USA, pp. 247-252. ISBN 9781424466368 (Print), 9782355000119 (Online)

packaging

Pavuluri, S.K., Ferenets, M., Goussetis, G., Desmulliez, M.P.Y., Tilford, T., Adamietz, R., Muller, G., Eicher, F. and Bailey, C. (2012) Encapsulation of microelectronic components using open-ended microwave oven. IEEE Transactions on Components, Packaging and Manufacturing Technology, 2 (5). pp. 799-806. ISSN 2156-3950 (doi:10.1109/TCPMT.2011.2177524)

Tilford, T., Ferenets, M., Adamietz, R., Pavuluri, S., Morris, J.E., Desmulliez, M.P.Y. and Bailey, C. (2010) Numerical analysis of microwave-assisted encapsulation processes for ball grid array packages. In: International Microwave Power Institute’s 44th Annual Symposium: 2010 Proceedings. International Microwave Power Institute (IMPI), Mechanicsville, VA, USA, pp. 30-35. ISSN 1070-0129

particle swarm optimisation algorithm

Tilford, T., Ferenets, M., Morris, J.E., Krumme, A., Pavuluri, S., Rajaguru, P.R., Desmulliez, M.P.Y. and Bailey, C. (2010) Application of particle swarm optimisation to evaluation of polymer cure kinetics models. Journal of Algorithms & Computational Technology, 4 (1). pp. 121-146. ISSN 1748-3018 (doi:10.1260/1748-3018.4.1.121)

particle swarm optimisation method

Tilford, T., Morris, J.E., Ferenets, M., Rajaguru, P.R., Pavuluri, S., Desmulliez, M.P.Y. and Bailey, C. (2010) Numerical analysis of polymer cure kinetics in isotropic conductive adhesives. In: 33rd International Spring Seminar on Electronics Technology (ISSE), 2010. Polymer Electronics and Nanotechnologies: Towards System Integration . IEEE Xplore, Sovereign House, London, N3 1QB, UK, pp. 412-416. ISBN 978-1-4244-7849-1 (print), 978-1-4244-7850-7 (e-ISBN) (doi:10.1109/ISSE.2010.5547360)

particle swarm optimization

Tilford, T., Morris, J.E., Ferenets, M., Rajaguru, P.R., Pavuluri, S.K., Desmulliez, M.P.Y. and Bailey, C. (2010) On model fitting methods for modeling polymer cure kinetics in microelectronics assembly applications. In: Electronics System Integration Technology Conference, ESTC 2010 - Proceedings. IEEE Computer Society, Piscataway, USA, pp. 1-6. ISBN 9781424485536 (Print), 9781424485543 (Online) (doi:10.1109/ESTC.2010.5642820)

polymer crosslinking

Tilford, T., Morris, J.E., Ferenets, M., Rajaguru, P.R., Pavuluri, S., Desmulliez, M.P.Y. and Bailey, C. (2010) Numerical analysis of polymer cure kinetics in isotropic conductive adhesives. In: 33rd International Spring Seminar on Electronics Technology (ISSE), 2010. Polymer Electronics and Nanotechnologies: Towards System Integration . IEEE Xplore, Sovereign House, London, N3 1QB, UK, pp. 412-416. ISBN 978-1-4244-7849-1 (print), 978-1-4244-7850-7 (e-ISBN) (doi:10.1109/ISSE.2010.5547360)

polymer cure kinetics models

Tilford, T., Ferenets, M., Morris, J.E., Krumme, A., Pavuluri, S., Rajaguru, P.R., Desmulliez, M.P.Y. and Bailey, C. (2010) Application of particle swarm optimisation to evaluation of polymer cure kinetics models. Journal of Algorithms & Computational Technology, 4 (1). pp. 121-146. ISSN 1748-3018 (doi:10.1260/1748-3018.4.1.121)

polymer cure models

Morris, J.E., Tilford, T., Bailey, C., Sinclair, K.I. and Desmulliez, M.P.Y. (2009) Polymer cure modeling for microelectronics applications. In: 32nd International Spring Seminar on Electronics Technology, 2009. ISSE 2009. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA. ISBN 978-1-4244-4260-7 (print) (doi:10.1109/ISSE.2009.5206929)

polymeric channels

Li, H., Yu, W., Zhang, L., Liu, Z., Brown, K.E., Abraham, E., Cargill, S., Tonry, C., Patel, M.K., Bailey, C. and Desmulliez, M.P.Y. (2013) Simulation and modelling of sub-30 nm polymeric channels fabricated by electrostatic induced lithography. RSC Advances, 3 (29). pp. 11839-11845. ISSN 2046-2069 (doi:10.1039/c3ra40188j)

printed circuit board (PCB)

Costello, S., Strusevich, N., Patel, M.K., Bailey, C., Flynn, D., Kay, R.W., Price, D., Bennett, M., Jones, A.C., Habeshaw, R., Demore, C., Cochran, S. and Desmulliez, M.P.Y. (2011) Characterisation of ion transportation during electroplating of high aspect ratio microvias using megasonic agitation. In: EMPC-2011: 18th European Microelectronics and Packaging Conference. Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 1-7. ISBN 9780956808606

printing

Desmulliez, M.P.Y., Kay, R.W., Stoyanov, S. and Bailey, C. (2004) Stencil printing at sub-100 microns pitch. In: Proceedings of 6th Electronics Packaging Technology Conference (EPTC 2004). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 354-358. ISBN 0780388216 (doi:10.1109/EPTC.2004.1396633)

Desmulliez, M.P.Y., Kay, R.W., Stoyanov, S. and Bailey, C. (2004) Stencil printing at sub-100 microns pitch. In: Proceedings of 6th Electronics Packaging Technology Conference (EPTC 2004). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 354-358. ISBN 0780388216 (doi:10.1109/EPTC.2004.1396633)

resonant cavity

Sinclair, K.I., Goussetis, G., Desmulliez, M.P.Y., Sangster, A.J., Tilford, T., Bailey, C. and Parrott, A.K. (2008) Optimization of an open-ended microwave oven for microelectronics packaging. IEEE Transactions on Microwave Theory and Techniques, 56 (11). pp. 2635-2641. ISSN 0018-9480 (doi:10.1109/TMTT.2008.2005925)

resonant microwave applicator

Pavuluri, S.K., Desmulliez, M.P.Y., Goussetis, G., Arrighi, V., Johnston, K., Adamietz, R., Tilford, T. and Bailey, C. (2012) Post cure behaviour of ancapsulants for QFN packages processed by an open-ended single mode resonant microwave applicator. In: Electronics Packaging Technology Conference (EPTC), 2011 13th. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 573-578. ISBN 978-1-4577-1983-7 (Print), 978-1-4577-1981-3 (Online) (doi:10.1109/EPTC.2011.6184486)

solders

Desmulliez, M.P.Y., Kay, R.W., Stoyanov, S. and Bailey, C. (2004) Stencil printing at sub-100 microns pitch. In: Proceedings of 6th Electronics Packaging Technology Conference (EPTC 2004). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 354-358. ISBN 0780388216 (doi:10.1109/EPTC.2004.1396633)

Desmulliez, M.P.Y., Kay, R.W., Stoyanov, S. and Bailey, C. (2004) Stencil printing at sub-100 microns pitch. In: Proceedings of 6th Electronics Packaging Technology Conference (EPTC 2004). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 354-358. ISBN 0780388216 (doi:10.1109/EPTC.2004.1396633)

stoves

Pavuluri, S.K., Tilford, T., Goussetis, G., Desmulliez, M.P.Y., Ferenets, M., Adamietz, R., Eicher, F. and Bailey, C. (2010) Advances in the design and test of a novel open ended microwave oven. In: Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, DTIP 2010. IEEE Computer Society, Piscataway, USA, pp. 247-252. ISBN 9781424466368 (Print), 9782355000119 (Online)

temperature measurement

Pavuluri, S.K., Desmulliez, M.P.Y., Goussetis, G., Arrighi, V., Johnston, K., Adamietz, R., Tilford, T. and Bailey, C. (2012) Post cure behaviour of ancapsulants for QFN packages processed by an open-ended single mode resonant microwave applicator. In: Electronics Packaging Technology Conference (EPTC), 2011 13th. Institute of Electrical and Electronics Engineers, Piscataway, NJ, USA, pp. 573-578. ISBN 978-1-4577-1983-7 (Print), 978-1-4577-1981-3 (Online) (doi:10.1109/EPTC.2011.6184486)

thermal stresses

Tilford, T., Sinclair, K.I., Goussetis, G., Bailey, C., Desmulliez, M.P.Y., Parrott, A.K. and Sangster, A.J. (2008) Numerical analysis of thermal stresses induced during VFM encapsulant curing. In: 31st International Spring Seminar on Electronics Technology, 2008. ISSE '08. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 348-353. ISBN 978-1-4244-3972-0 (doi:10.1109/ISSE.2008.5276666)

thermomechanical stress development

Tilford, T., Ferenets, M., Adamietz, R., Pavuluri, S.K., Morris, J.E., Desmulliez, M.P.Y. and Bailey, C. (2010) Numerical analysis of microwave underfill cure in ball-grid packages. In: Electronics System Integration Technology Conference, ESTC 2010 - Proceedings. IEEE Computer Society, Piscataway, USA, pp. 1-6. ISBN 9781424485536 (Print), 9781424485543 (Online) (doi:10.1109/ESTC.2010.5642822)

thermosetting polymer

Tilford, T., Sinclair, K.I., Goussetis, G., Bailey, C., Desmulliez, M.P.Y., Parrott, A.K. and Sangster, A.J. (2008) Numerical analysis of thermal stresses induced during VFM encapsulant curing. In: 31st International Spring Seminar on Electronics Technology, 2008. ISSE '08. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 348-353. ISBN 978-1-4244-3972-0 (doi:10.1109/ISSE.2008.5276666)

Variable Frequency Microwave (VFM) system

Tilford, T., Sinclair, K.I., Goussetis, G., Bailey, C., Desmulliez, M.P.Y., Parrott, A.K. and Sangster, A.J. (2008) Numerical analysis of thermal stresses induced during VFM encapsulant curing. In: 31st International Spring Seminar on Electronics Technology, 2008. ISSE '08. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 348-353. ISBN 978-1-4244-3972-0 (doi:10.1109/ISSE.2008.5276666)

Tilford, T., Sinclair, K.I., Goussetis, G., Bailey, C., Desmulliez, M.P.Y., Parrott, A.K. and Sangster, A.J. (2008) Numerical simulation of encapsulant curing within a variable frequency microwave processing system. In: Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Micro-Systems, 2008. EuroSimE 2008. International Conference on. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 447-454. ISBN 978-1-4244-2127-5 (doi:10.1109/ESIME.2008.4525086)

waveguide resonator

Sinclair, K.I., Goussetis, G., Desmulliez, M.P.Y., Sangster, A.J., Tilford, T., Bailey, C. and Parrott, A.K. (2008) Optimization of an open-ended microwave oven for microelectronics packaging. IEEE Transactions on Microwave Theory and Techniques, 56 (11). pp. 2635-2641. ISSN 0018-9480 (doi:10.1109/TMTT.2008.2005925)

This list was generated on Sat Apr 21 06:48:25 2018 BST.