Skip navigation

Study of Anisotropic Conductive Adhesive Joint Behaviour under 3-Point Bending

Study of Anisotropic Conductive Adhesive Joint Behaviour under 3-Point Bending

Rizvi, M.J., Chan, Y.C., Bailey, Christopher ORCID logoORCID: https://orcid.org/0000-0002-9438-3879 and Lu, Hua ORCID logoORCID: https://orcid.org/0000-0002-4392-6562 (2005) Study of Anisotropic Conductive Adhesive Joint Behaviour under 3-Point Bending. Microelectronics Reliability, 4 (5). pp. 589-596. ISSN 0026-2714 (doi:10.1016/j.microrel.2004.10.015)

Full text not available from this repository.

Abstract

Flip chip interconnections using anisotropic conductive film (ACF) are now a very attractive technique for electronic packaging assembly. Although ACF is environmentally friendly, many factors may influence the reliability of the final ACF joint. External mechanical loading is one of these factors. Finite element analysis (FEA) was carried out to understand the effect of mechanical loading on the ACF joint. A 3-dimensional model of adhesively bonded flip chip assembly was built and simulations were performed for the 3-point bending test. The results show that the stress at its highest value at the corners, where the chip and ACF were connected together. The ACF thickness was increased at these corner regions. It was found that higher mechanical loading results in higher stress that causes a greater gap between the chip and the substrate at the corner position. Experimental work was also carried out to study the electrical reliability of the ACF joint with the applied bending load. As per the prediction from FEA, it was found that at first the corner joint failed. Successive open joints from the corner towards the middle were also noticed with the increase of the applied load.

Item Type: Article
Additional Information: 05/44
Pre-2014 Departments: School of Computing & Mathematical Sciences
School of Computing & Mathematical Sciences > Centre for Numerical Modelling & Process Analysis
School of Computing & Mathematical Sciences > Centre for Numerical Modelling & Process Analysis > Computational Mechanics & Reliability Group
School of Computing & Mathematical Sciences > Department of Computer Science
School of Computing & Mathematical Sciences > Department of Computer Systems Technology
School of Computing & Mathematical Sciences > Department of Mathematical Sciences
Related URLs:
Last Modified: 20 Mar 2019 11:54
URI: http://gala.gre.ac.uk/id/eprint/912

Actions (login required)

View Item View Item