Skip navigation

Mechanisms of ultrasonic de-agglomeration of oxides through in-situ high-speed observations and acoustic measurements

Mechanisms of ultrasonic de-agglomeration of oxides through in-situ high-speed observations and acoustic measurements

Priyadarshi, Abhinav, Khavari, Mohammad, Subrotob, Tungky, Prentice, Paul, Pericleous, Kyriacos A ORCID: 0000-0002-7426-9999 , Eskin, Dmitry, Durorola, John and Tzanakis, Iakovos (2021) Mechanisms of ultrasonic de-agglomeration of oxides through in-situ high-speed observations and acoustic measurements. Ultrasonics Sonochemistry, 79:105792. pp. 1-12. ISSN 1350-4177 (Print), 1350-4177 (Online) (doi:https://doi.org/10.1016/j.ultsonch.2021.105792)

[img]
Preview
PDF (Author's published manuscript)
Mechanisms of ultrasonic de-agglomeration of oxides.pdf - Published Version
Available under License Creative Commons Attribution.

Download (7MB) | Preview

Abstract

Ultrasonic de-agglomeration and dispersion of oxides is important for a range of applications. In particular, in liquid metal, this is one of the ways to produce metal-matrix composites reinforced with micron and nano sized particles. The associated mechanism through which the de-agglomeration occurs has, however, only been conceptualized theoretically and not yet been validated with experimental observations. In this paper, the influence of ultrasonic cavitation on SiO2 and MgO agglomerates (commonly found in lightweight alloys as reinforcements) with individual particle sizes ranging between 0.5 and 10 μm was observed for the first time in-situ using high-speed imaging. Owing to the opacity of liquid metals, a de-agglomeration imaging experiment was carried out in de-ionised water with sequences captured at frame rates up to 50 kfps. In-situ observations were further accompanied by synchronised acoustic measurements using an advanced calibrated cavitometer, to reveal the effect of pressure amplitude arising from oscillating microbubbles on oxide de-agglomeration. Results showed that ultrasound-induced microbubble clusters pulsating chaotically, were predominantly responsible for the breakage and dispersion of oxide agglomerates. Such oscillating cavitation clusters were seen to capture the floating agglomerates resulting in their immediate disintegration. De-agglomeration of oxides occurred from both the surface and within the bulk of the aggregate. Microbubble clusters oscillating with associated emission frequencies at the subharmonic, 1st harmonic and low order ultra-harmonics of the driving frequency were deemed responsible for the breakage of the agglomerates.

Item Type: Article
Uncontrolled Keywords: ultrasonics, de-agglomeration, dispersion of oxides, microbubbles, high-speed imaging
Subjects: Q Science > QD Chemistry
Faculty / School / Research Centre / Research Group: Faculty of Liberal Arts & Sciences
Faculty of Engineering & Science > Centre for Numerical Modelling & Process Analysis (CNMPA)
Faculty of Engineering & Science > Centre for Numerical Modelling & Process Analysis (CNMPA) > Computational Science & Engineering Group (CSEG)
Related URLs:
Last Modified: 16 Oct 2022 01:38
URI: http://gala.gre.ac.uk/id/eprint/34139

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year

View more statistics