Comparisons between "sand blast" and "centripetal effect accelerator" type erosion testers
Burnett, A. J., De Silva, S. R. and Reed, A. R. (1995) Comparisons between "sand blast" and "centripetal effect accelerator" type erosion testers. Wear, 186-87 (PART 1). pp. 168-178. ISSN 0043-1648 (doi:10.1016/0043-1648(95)07143-1)Full text not available from this repository.
There are two major types of erosion testing devices that are used throughout the world for quantifying particle impact erosion against a solid surface. The first of these uses pressurised air to accelerate abrasive particles through a nozzle so that they impinge upon a target specimen. The second adopts a rotating disc to accelerate abrasive particles using the centripetal effect so that they impinge upon a series of targets arranged around the periphery of the disc. This paper reports the findings of a collaborative project that was designed to compare the performance and results obtained from a rig of each of the two types mentioned above. The sand blast type rig was provided by The Department of Powder Science Technology (POSTEC) at The Telemark Technological Research and Development Centre (TEL-TEK), Porsgrunn, Norway while the centripetal effect accelerator was provided by The Wolfson Centre for Bulk Solids Handling Technology, University of Greenwich, London, UK. The test programme included tests against a wide range of materials that are commonly used in pneumatic handling facilities. (Pneumatic handling is a means of conveying and transporting powders and granular solid materials in bulk in industrial process plant, through pipelines using a gas as the carrier medium.) Olivine sand was used as the abrasive and it was projected against the test specimens at velocities and concentrations commensurate with those seen in pneumatic conveyors. In all instances the materials used in the test programme were taken from the same batch so that scatter of experimental results due to specimen variation was minimised. The paper contains a series of recommendations for erosion testing equipment. A discussion based on the results and their applicability to the prediction of wear in pneumatic conveyors concludes the paper. © 1995.
|Uncontrolled Keywords:||erosion, impact damage, sand blasting, abrasives, granular materials, industrial plants, nozzles, particles, particulate matter, pneumatic materials handling equipment, powders, sand, surfaces, wear of materials, centripetal effect accelerator, erosion testers, olivine sand, particle impact, sand blast, erosion,|
|Subjects:||Q Science > QC Physics|
|School / Department / Research Groups:||School of Engineering
Faculty of Engineering & Science > School of Engineering
School of Engineering > Wolfson Centre for Bulk Solids Handling Technology
Faculty of Engineering & Science > School of Engineering > Wolfson Centre for Bulk Solids Handling Technology
|Last Modified:||30 Mar 2016 17:14|
Actions (login required)