Water loss from magnesia-based cements
Cannesson, Elodie, Manier, Suliane and Nicholson, John W. (2010) Water loss from magnesia-based cements. Ceramics Silikáty, 54 (4). pp. 341-344. ISSN 0862-5468 (Print), 1804-5847 (Online)Full text not available from this repository.
The water loss from four different formulations of magnesium oxychloride cement and two of magnesium oxysulphate cement has been studied. Five specimens of each were stored in a desiccating atmosphere and all lost water rapidly, equilibrating within three hours. For all the magnesium chloride cements, and for one of the magnesium oxysulphate cements (25 % m/m MgSO4) water loss was Fickian to values of Mt/M∞ around 0.8 for the oxychloride cements and 0.6 for the oxysulphate cement. However, plots did not go through the origin, as there was an induction time of between 3.1 and 6.3 minutes before true diffusion began. Diffusion coefficients were in the range 1.23-1.84 x 10-6 cm2/s. Equilibrium water losses varied from 27.4% (10 % MgCl2) to 6.9% (75 % MgCl2), and from 28.1 % (10 % MgSO4) to 11.9% (25 % MgSO4). Water transport properties were shown to be strongly influenced by the chloride or sulphate content of the cement formulation.
|Uncontrolled Keywords:||magnesia, oxychloride, oxysulphate, water, diffusion|
|Subjects:||Q Science > Q Science (General)
T Technology > TP Chemical technology
|School / Department / Research Groups:||School of Science
Faculty of Engineering & Science > School of Science
School of Science > Department of Pharmaceutical, Chemical & Environmental Sciences
Faculty of Engineering & Science > School of Science > Department of Pharmaceutical, Chemical & Environmental Sciences
Faculty of Engineering & Science
|Last Modified:||21 Jul 2015 16:38|
Actions (login required)