Influence of central vertical bar on the behaviour of high strength concrete transfer beam-column joints
Motamed, Jubin and Al-Hussaini, Abbas (2009) Influence of central vertical bar on the behaviour of high strength concrete transfer beam-column joints. In: The Third International Conference on Concrete and Development. Building and Housing Research Center, Tehran, Iran, pp. 485-496.Full text not available from this repository.
Beam column joint (BCJ) specimens tested under monotonic loading were compared with joint shear failure predicted according to EC8-NA  and ACI352 .
Inadequacy of these design codes for accurate estimations of the shear stresses at BCJ are identified. A design rule for the prediction of BCJ failure for high strength concrete (HSC) is given. The proposed method offer better accuracy when the results are compared with design rules from the above codes and research results.
Finite element numerical models for BCJ specimens were compared with the experimental ones. Furthermore parametric investigations of the influence of Central Vertical Bar, CVB, on the shear capacity of HSC- BCJ were conducted.
Strut and tie model for BCJ with CVB was developed to guide the designers towards using the proposed design rule to calculate the amount of shear CVB and stirrups required in order to resist the excessive joint shear.
|Item Type:||Book Section|
|Additional Information:||Paper included in the proceedings of the 3rd International Conference on Concrete and Development, held 27-29 April 2009, at the Building and Housing Research Center, affiliated to the Ministry of Housing and Urban Development, Tehran, I.R., Iran.|
|Uncontrolled Keywords:||high strength concrete, transfer beam column joint, central vertical bar|
|Subjects:||T Technology > TA Engineering (General). Civil engineering (General)|
|School / Department / Research Groups:||School of Engineering|
School of Engineering > Department of Civil Engineering
|Last Modified:||16 Aug 2011 12:47|
Actions (login required)