Skip navigation

Evaluation of rheological properties of lead-free solder pastes and their relationship with transfer efficiency during stencil printing process

Evaluation of rheological properties of lead-free solder pastes and their relationship with transfer efficiency during stencil printing process

Amalu, Emeka H., Ekere, Ndy and Mallik, Sabuj (2011) Evaluation of rheological properties of lead-free solder pastes and their relationship with transfer efficiency during stencil printing process. Materials and Design, 32 (6). pp. 3189-3197. ISSN 0261-3069 (doi:10.1016/j.matdes.2011.02.045)

Full text not available from this repository.

Abstract

Although stencil printing is widely used in surface mount technology, it is believed to be the main source of majority of defects in the final assembly. Such defects, which could lead to major reliability issues, can be controlled and/or minimised through proper understanding and control of the flow and deformation behaviour of solder pastes. This study concerns the characterisation of three different Pb-free solder pastes used for ultra-fine pitch assembly applications. We also investigate the paste transfer efficiency through linearly varying stencil apertures sizes, and correlate the paste rheological properties with their transfer efficiency – to provide further understanding of the effects and interactions of stencil printing process variables on the paste transfer efficiency. Three rheological tests, namely: the viscosity, thixotropic and oscillatory amplitude sweep were employed in the characterisation. The paste samples were printed on Cu substrates using stencil printing (with varying aperture cavity dimensions in the range 0.79 mm3–1.62 mm3). A three-level design on two factors experiment, 32, was used to determine significant level of parameters in terms of main effect and interactions. Our results show that the paste type and volume of stencil aperture interact during printing and that pastes with unique rheological properties produced distinctive transfer pattern. The results also show that the printing process variables and their interactions were significant on transfer efficiency of pastes. These results will be of interest to R&D staff involved in formulation of new Pb-free pastes and the design of stencils for ultra-fine pitch assembly applications.

Item Type: Article
Additional Information: [1] First available online: 22 February 2011. [2] The authors acknowledge the Petroleum Technology Development Fund (PTDF), Nigeria, who are sponsoring the PG research work reported in parts in this Paper. We also acknowledge the support of EMERG staff/students and the laboratory staff of University of Greenwich. In addition, we would like to thank Mr Ahmed G. Aminu of Petroleum Technology Development Fund, Abuja, Nigeria, for his support and advice.
Uncontrolled Keywords: adhesives, elastic and plastic behaviour, non-destructive testing, NDT
Subjects: T Technology > TA Engineering (General). Civil engineering (General)
Pre-2014 Departments: School of Engineering
School of Engineering > Manufacturing Engineering Research Group
Related URLs:
Last Modified: 14 Oct 2016 09:16
Selected for GREAT 2016: None
Selected for GREAT 2017: None
Selected for GREAT 2018: None
URI: http://gala.gre.ac.uk/id/eprint/6401

Actions (login required)

View Item View Item