Article

Abdallah, Yasser ORCID: 0000-0001-5425-7598 , Shehab, Essam and Al-Ashaab, Ahmed (2022) Developing a digital transformation process in the manufacturing sector: Egyptian case study. Information Systems and e-Business Management, 20. pp. 613-630. ISSN 1617-9846 (Print), 1617-9854 (Online) (doi:https://doi.org/10.1007/s10257-022-00558-3)

Adebanjo, Dotun ORCID: 0000-0003-4845-9411 , Teh, Pei-Lee and Ahmed, Pervaiz K. (2016) The impact of external pressure and sustainable management practices on manufacturing performance and environmental outcomes. International Journal of Operations & Production Management, 36 (9). pp. 995-1013. ISSN 0144-3577 (doi:https://doi.org/10.1108/IJOPM-11-2014-0543)

Aziz, Hayder, Li, Zhengxi and Gao, James ORCID: 0000-0001-5625-3654 (2008) Engineering design knowledge management in de-centralised virtual enterprises. Computer-Aided Design and Applications, 5 (6). pp. 787-800. ISSN 1686-4360 (Online) (doi:https://doi.org/10.3722/cadaps.2008.787-800)

Aziza-Zafra, Karol (2010) A hat trick for coal handling. International Bulk Journal, 5. pp. 67-70. ISSN 0260-1087

Barashev, A. V. and Arokiam, A. C. (2006) Monte Carlo modelling of Cu atom diffusion in α-Fe via the vacancy mechanism. Philosophical Magazine Letters, 86 (5). pp. 321-332. ISSN 0950-0839 (Print), 1362-3036 (Online) (doi:https://doi.org/10.1080/09500830600788927)

Baxter, David, Gao, James ORCID: 0000-0001-5625-3654 , Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2008) A framework to integrate design knowledge reuse and requirements management in engineering design. Robotics and Computer-Integrated Manufacturing, 24 (4). pp. 585-593. ISSN 0736-5845 (doi:https://doi.org/10.1016/j.rcim.2007.07.010)

Baxter, David, Roy, Rajkumar, Doultsinou, Athanasia, Gao, James ORCID: 0000-0001-5625-3654 and Kalta, Mohamad (2009) A knowledge management framework to support product-service systems design. International Journal of Computer Integrated Manufacturing, 22 (12). pp. 1073-1088. ISSN 0951-192X (Print), 1362-3052 (Online) (doi:https://doi.org/10.1080/09511920903207464)

Bradley, M. S. A. and Berry, R. (2007) Investigation of the effect of test procedure factors on the failure loci and derived failure functions obtained from annular shear cells. Powder Technology, 174 (1-2). pp. 60-63. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2006.10.023)

Bradley, Michael S.A., Berry, Rob and Pillai, John (2007) Comparison between the angles of wall friction measured on an on-line wall friction tester and the Jenike wall friction tester. Powder Technology, 174 (1-2). pp. 64-70. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2006.10.024)

Butler, Colin J. (2010) Internal and lateral communication in strategic alliance decision making. Management Decision, 48 (5). pp. 698-712. ISSN 0025 1747 (doi:https://doi.org/10.1108/00251741011043885)

Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James ORCID: 0000-0001-5625-3654 , Dani, Shilpa and Baxter, David (2008) Knowledge reuse in manufacturability analysis. Robotics and Computer Integrated Manufacturing, 24 (4). pp. 508-513. ISSN 0736-5845 (doi:https://doi.org/10.1016/j.rcim.2007.07.003)

Cochrane, Sean, Young, Robert, Case, Keith, Harding, Jennifer, Gao, James ORCID: 0000-0001-5625-3654 , Dani, Shilpa and Baxter, David (2009) Manufacturing knowledge verification in design support systems. International Journal of Production Research, 47 (12). pp. 3179-3204. ISSN 0020-7543 (Print), 1366–588X (Online) (doi:https://doi.org/10.1080/00207540701802452)

Cross, M., McBride, D., Croft, T.N., Williams, A.J., Pericleous, K. ORCID: 0000-0002-7426-9999 and Lawrence, J.A. (2006) Computational modeling of mold filling and related free-surface flows in shape casting: an overview of the challenges involved. Metallurgical and Materials Transactions B, 37 (6). pp. 879-885. ISSN 1073-5615 (Print), 1543-1916 (Online) (doi:https://doi.org/10.1007/BF02735009)

Doultsinou, Athanasia, Roy, Rajkumar, Baxter, David, Gao, James ORCID: 0000-0001-5625-3654 and Mann, Andy (2009) Developing a service knowledge reuse framework for engineering design. Journal of Engineering Design, 20 (4). pp. 389-411. ISSN 0954-4828 (Print), 1466-1837 (Online) (doi:https://doi.org/10.1080/09544820903149354)

Drobouchevitch, I.G. and Strusevich, V.A. (2000) Heuristics for the two-stage job shop scheduling problem with a bottleneck machine. European Journal of Operational Research, 123 (2). pp. 229-240. ISSN 0377-2217 (doi:https://doi.org/10.1016/S0377-2217(99)00253-2)

Dupuis, Marc and Bojarevics, Valdis ORCID: 0000-0002-7326-7748 (2011) Retrofit of a 500 kA cell design into a 600 kA cell design. International Aluminium Journal, 87 (1/2). pp. 52-55. ISSN 0002-6689

El Souri, Mohammed, Gao, James ORCID: 0000-0001-5625-3654 , Owodunni, Oladele, Simmonds, Clive and Martin, Nick (2018) A structured approach to defect data management for improving DFM implementation in aerospace manufacturing. International Journal of Product Lifecycle Management, 10 (4). ISSN 1743-5110 (Print), 1743-5129 (Online) (doi:https://doi.org/10.1504/IJPLM.2017.090330)

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2009) Direct measurement of powder flavor adhesion onto crisp surface using a novel adhesion tester. Particulate Science and Technology, 27 (4). pp. 362-372. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:https://doi.org/10.1080/02726350902994035)

Fan, Xianqiang, Fleming, Tristan G., Rees, David T., Huang, Yuze, Marussi, Sebastian, Leung, Chu Lun Alex, Atwood, Robert C., Kao, Andrew ORCID: 0000-0002-6430-2134 and Lee, Peter D. (2023) Thermoelectric magnetohydrodynamic control of melt pool flow during laser directed energy deposition additive manufacturing. Additive Manufacturing, 71 (5):103587. pp. 1-11. ISSN 2214-7810 (Print), 2214-8604 (Online) (doi:https://doi.org/10.1016/j.addma.2023.103587)

Farnish, R. (2009) Dosing of powders into processes - is your process control screwed? Bulk Solids Handling, 29 (5). pp. 278-281. ISSN 0173-9980

Folinas, Dimitris and Manikas, Ioannis (2010) Design and development of an e-platform for supporting liquid food supply chain monitoring and traceability. International Journal of Information Systems and Supply Chain Management (IJISSCM), 3 (3). pp. 29-49. ISSN 1935-5726 (Print), 1935-5734 (Online) (doi:https://doi.org/10.4018/jisscm.2010070103)

Gao, J. X. ORCID: 0000-0001-5625-3654 and Bradfield, D. J. (2007) A methodology to facilitate knowledge sharing in the new product development process. International Journal of Production Research, 45 (7). pp. 1489-1504. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:https://doi.org/10.1080/00207540600942227)

Gao, James ORCID: 0000-0001-5625-3654 and Baxter, David (2007) Editorial for the special issue of RCIM for ICMR2005: Third International Conference on Manufacturing Research, Cranfield University, September 6th–9th 2005, Cranfield, UK. Robotics and Computer-Integrated Manufacturing, 24 (4). pp. 499-500. ISSN 0736-5845 (doi:https://doi.org/10.1016/j.rcim.2007.07.001)

Gao, James ORCID: 0000-0001-5625-3654 , Baxter, David, Case, Keith, Harding, Jennifer, Young, Robert, Cochrane, Sean and Dani, Shilpa (2007) An engineering design knowledge reuse methodology using process modelling. Research in Engineering Design, 18 (1). pp. 37-48. ISSN 0934-9839 (doi:https://doi.org/10.1007/s00163-007-0028-8)

Gao, James ORCID: 0000-0001-5625-3654 , Baxter, David and Roy, Rajkumar (2009) Managing knowledge within the manufacturing enterprise: an overview. International Journal of Manufacturing Technology and Management (IJMTM), 18 (2). pp. 183-209. ISSN 1368-2148 (doi:https://doi.org/10.1504/IJMTM.2009.026193)

Gao, James ORCID: 0000-0001-5625-3654 , Bradfield, Daniel J. and Soltan, Hossein (2007) A metaknowledge approach to facilitate knowledge sharing in the global product development process. Computer-Aided Design and Applications, 4 (1-4). pp. 519-528. ISSN 1686-4360 (doi:https://doi.org/10.3722/cadaps.2007.519-528)

Gu, Xiaoyu, Zhou, Li ORCID: 0000-0001-7132-5935 , Huang, Hongfu, Shi, Xiutian and Ieromonachou, Petros ORCID: 0000-0002-5842-9585 (2021) Electric vehicle battery secondary use under government subsidy: a closed-loop supply chain perspective. International Journal of Production Economics:108035. ISSN 0925-5273 (doi:https://doi.org/10.1016/j.ijpe.2021.108035)

Jian, Guo, Gao, James ORCID: 0000-0001-5625-3654 and Wang, Yinglin (2010) A multi-agent based knowledge search framework to support the product development process. International Journal of Computer Integrated Manufacturing, 23 (3). pp. 237-247. ISSN 0951-192X (doi:https://doi.org/10.1080/09511920903529222)

Jones, Keith and Sharp, Mark (2007) A new performance-based process model for built asset maintenance. Facilities, 25 (13/14). pp. 525-535. ISSN 0263-2772 (doi:https://doi.org/10.1108/02632770710822616)

Kao, A. ORCID: 0000-0002-6430-2134 , Pericleous, K. ORCID: 0000-0002-7426-9999 , Patel, M.K. and Voller, V. (2009) Effects of magnetic fields on crystal growth. International Journal of Cast Metals Research, 22 (1-4). pp. 147-150. ISSN 1364-0461 (Print), 1743-1336 (Online) (doi:https://doi.org/10.1179/136404609X367551)

Kuenzel, Sven and Vaux Halliday, Sue (2010) The chain of effects from reputation and brand personality congruence to brand loyalty: The role of brand identification. Journal of Targeting, Measurement and Analysis for Marketing, 18 (3-4). pp. 167-176. ISSN 0967-3237 (Print), 1479-1862 (Online) (doi:https://doi.org/10.1057/jt.2010.15)

Le, C.H., Okereke, M.I. ORCID: 0000-0002-2104-012X , Nguyen, V.H., Dao, V.D., Soe, S., Zlatov, N. and Le, T.H. (2011) Personalised medical product development: Methods, challenges and opportunities. Romanian Review Precision Mechanics, Optics and Mechatronics, 40. pp. 11-20. ISSN 1584-5982

Li, Chun-Qing and Shao, L. (2007) Reliability based asset management strategy for concrete infrastructure. International Journal of Materials and Structural Reliability, 5 (1). pp. 13-28.

Li, Nanya, Li, Yingguang, Hang, Xiang and Gao, James ORCID: 0000-0001-5625-3654 (2014) Analysis and optimization of temperature distribution in carbon fiber reinforced composite materials during microwave curing process. Journal of Materials Processing Technology, 214 (3). pp. 544-550. ISSN 0924-0136 (doi:https://doi.org/10.1016/j.jmatprotec.2013.10.012)

Li, Nanya, Li, Yingguang, Hao, Xiaozhong and Gao, James ORCID: 0000-0001-5625-3654 (2015) A comparative experiment for the analysis of microwave and thermal process induced strains of carbon fiber/bismaleimide composite materials. Composites Science and Technology, 106. pp. 15-19. ISSN 0266-3538 (doi:https://doi.org/10.1016/j.compscitech.2014.10.008)

Li, Yingguang, Gao, James ORCID: 0000-0001-5625-3654 and Lee, Chen-Han (2015) Special issue on Computational Numerical Control Machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229 (7). pp. 1085-1086. ISSN 0954-4054 (Print), 2041-2975 (Online) (doi:https://doi.org/10.1177/0954405415592117)

Li, Yingguang, Mou, Wenping, Li, Jingjing, Liu, Changqing and Gao, Xiaoyu ORCID: 0000-0001-5625-3654 (2020) An automatic and accurate method for tool wear inspection using grayscale image probability algorithm based on bayesian Inference. Robotics and Computer-Integrated Manufacturing, 68:102079. ISSN 0736-5845 (doi:https://doi.org/10.1016/j.rcim.2020.102079)

Liu, Changqing, Li, Yingguang and Gao, James ORCID: 0000-0001-5625-3654 (2017) Special issue on digital enterprise technologies (editorial). International Journal of Advanced Manufacturing Technology. pp. 1-2. ISSN 0268-3768 (Print), 1433-3015 (Online) (doi:https://doi.org/10.1007/s00170-017-0595-4)

Liu, Changqing, Li, Yingguang, Hua, Jiaqi, Zhao, Zhiwei and Gao, James ORCID: 0000-0001-5625-3654 (2024) A causal based method for denoising non-homologous noises in time series manufacturing monitoring data. Journal of Manufacturing Systems, 76. pp. 92-102. ISSN 0278-6125 (Print), 1878-6642 (Online) (doi:https://doi.org/10.1016/j.jmsy.2024.07.008)

Majcen, Natasa, Snowden, Martin ORCID: 0000-0002-1087-2692 , Mitchell, John C. ORCID: 0000-0003-2945-3292 , Cornelius, Victoria J. and Voncina, Bojana (2005) The development of smart fabrics. Journal of Pharmacy and Pharmacology, 57 (Suppl.). S58-S58. ISSN Online ISSN: 2042-7158

Manos, Basil and Manikas, Ioannis (2010) Traceability in the Greek fresh produce sector: drivers and constraints. British Food Journal, 112 (6). pp. 640-652. ISSN 0007-070X (doi:https://doi.org/10.1108/00070701011052727)

Mayur, Yaul, Bhatti, Rajinderpal and Lawrence, Stephen (2008) Evaluating the process of borosilicate glass capillaries used for fabrication of in-vitro fertilization (IVF) micro-pipettes. Biomedical Microdevices, 10 (1). pp. 123-128. ISSN 1387-2176 (doi:https://doi.org/10.1007/s10544-007-9117-8)

Mountney, S. L., Gao, J. X. ORCID: 0000-0001-5625-3654 and Wiseall, S. (2007) A knowledge system to support manufacturing knowledge during preliminary design. International Journal of Production Research, 45 (7). pp. 1521-1537. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:https://doi.org/10.1080/00207540600942300)

Naghi Ganji, Elmira, Shah, Satya and Coutroubis, Alec (2017) Bridging new product development with sustainable supply chain management practices. International Journal of Economics and Management Systems, 2. pp. 178-186. ISSN 2367-8925

Naghi Ganji, Elmira, Shah, Satya and Coutroubis, Alec (2017) Case study analysis of sustainable supply chain redesign linking with new product development. WSEAS Transactions on Business and Economics, 14:22. pp. 193-205. ISSN 1109-9526 (Print), 2224-2899 (Online)

Nwajana, Augustine ORCID: 0000-0001-6591-5269 and Obi, Emenike Raymond (2023) Application of compact folded-arms square open-loop resonator to bandpass filter design. Micromachines, 14 (2):320. ISSN 2072-666X (Online) (doi:https://doi.org/10.3390/mi14020320)

Rizzuto, J.P. and Larsen, O. Popovic (2010) Connection systems in reciprocal frames and mutually supported elements space structure networks. International Journal of Space Structures, 25 (4). pp. 243-256. ISSN 0266-3511 (doi:https://doi.org/10.1260/0266-3511.25.4.243)

Robinson, John, Kingman, Sam, Snape, Colin E., Bradley, Mike, Bradshaw, Steven, Thomas, Dominic J.M. and Page, Paul W. (2009) Microwave treatment of oil-contaminated drill cuttings at pilot scale. SPE Drilling and Completion, 24 (3). pp. 430-435. ISSN 1064-6671 (Print), 1930-0204 (Online) (doi:https://doi.org/10.2118/111637-PA)

Rong, Ke, Lin, Yong ORCID: 0000-0001-7118-2946 , Yu, Jiang and Zhang, Yue (2019) Manufacturing strategies for the ecosystem-based manufacturing system in the context of 3D printing. International Journal of Production Research, 58 (8). pp. 2315-2334. ISSN 0020-7543 (doi:https://doi.org/10.1080/00207543.2019.1627436)

Roy, A.A., Easter, S., Bojarevics, V. ORCID: 0000-0002-7326-7748 and Pericleous, K. ORCID: 0000-0002-7426-9999 (2012) Use of a static magnetic field in measuring the thermal conductivity of a levitated molten droplet. Journal of Algorithms and Computational Technology, 6 (1). pp. 153-172. ISSN 1748-3018 (doi:https://doi.org/10.1260/1748-3018.6.1.153)

Sharma, R. and Gao, J. X. ORCID: 0000-0001-5625-3654 (2006) A knowledge-based manufacturing and cost evaluation system for product design/re-design. The International Journal of Advanced Manufacturing Technology, 33 (9-10). pp. 856-865. ISSN 0268-3768 (Print), 1433-3015 (Online) (doi:https://doi.org/10.1007/s00170-006-0530-6)

Shehu, T. and Bhatti, R.S. (2012) The use of Yam flour (starch) as binder for sand mould production in Nigeria. World Applied Sciences Journal, 16 (6). pp. 858-862. ISSN 1818-495 (doi:wasj/wasj16(6)12/14.pdf)

Tian, Kun V., Nagy, Peter M., Chass, Gregory A., Fejerdy, Pal, Nicholson, John W., Csizmadia, Imre G. and Dobó-Nagy, Csaba (2012) Qualitative assessment of microstructure and Hertzian indentation failure in biocompatible glass ionomer cements. Journal of Materials Science: Materials in Medicine, 23 (3). pp. 677-685. ISSN 0957-4530 (Print), 1573-4838 (Online) (doi:https://doi.org/10.1007/s10856-012-4553-2)

Wan, Shan, Li, Dongbo, Gao, James ORCID: 0000-0001-5625-3654 and Li, Jing (2019) A knowledge based machine tool maintenance planning system Using case-based reasoning techniques. Robotics and Computer-Integrated Manufacturing, 58. pp. 80-96. ISSN 0736-5845 (doi:https://doi.org/10.1016/j.rcim.2019.01.012)

Wang, H., Djambazov, G. ORCID: 0000-0001-8812-1269 , Pericleous, K. ORCID: 0000-0002-7426-9999 , Harding, R.A. and Wickins, M. (2012) Numerical modelling of tilt casting process for γ-TiAl alloys. International Journal of Cast Metals Research, 25 (2). pp. 65-74. ISSN 1364-0461 (Print), 1743-1336 (Online) (doi:https://doi.org/10.1179/1743133611Y.0000000024)

Younas, Muhammad ORCID: 0000-0003-2462-5526 , Khan, Mushtaq, Jaffery, Syed Husain Imran, Khan, Zarak ORCID: 0000-0002-2135-1948 and Khan, Nawar (2024) Investigation of tool wear and energy consumption in machining Ti6Al4V alloy with uncoated tools. The International Journal of Advanced Manufacturing Technology, 132. pp. 3785-3799. ISSN 0268-3768 (Print), 1433-3015 (Online) (doi:https://doi.org/10.1007/s00170-024-13548-1)

Zhao, Zhiwei, Li, Yingguang, Liu, Changqing and Gao, James ORCID: 0000-0001-5625-3654 (2019) On-line part deformation prediction based on deep learning. Journal of Intelligent Manufacturing, 31 (3). pp. 561-574. ISSN 0956-5515 (Print), 1572-8145 (Online) (doi:https://doi.org/10.1007/s10845-019-01465-0)

Zhou, X.Z., Zheng, J.J. and Li, Chun-Qing (2006) An analytical method for prediction of the elastic modulus of concrete. Magazine of Concrete Research, 58 (10). pp. 665-673. ISSN 0024-9831 (Print), 7 June 2006 (Online) (doi:https://doi.org/10.1680/macr.2006.58.10.665)

Zhu, Haihua, Gao, James ORCID: 0000-0001-5625-3654 , Li, Dongbo and Tang, Dunbing (2012) A Web-based Product Service System for aerospace maintenance, repair and overhaul services. Computers in Industry, 63 (4). pp. 338-348. ISSN 0166-3615 (doi:https://doi.org/10.1016/j.compind.2012.02.016)

Book Section

Angulo Pinzon, O.A., Bradley, Michael, Berry, Robert and Farnish, Richard J. (2008) Modelling dosator filling and discharge of powder. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 586-591. ISBN 9788272062896

Ariza-Zafra, K., Berry, Robert and Bradley, Michael S. A. (2008) Review of models for predicting the discharge rates of bulk particulates from silos and bins. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 484-492. ISBN 9788272062896

Berry, Rob, Bradley, Michael S.A., Farnish, Richard J. and Angulo Pinzon, O.A. (2008) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 344-350. ISBN 9788272062896

Bhatti, R. and Berkhauer-Smith, S. (2007) An integrated methodology of manufacturing business improvement strategies. In: Olhager, J. and Persson, F., (eds.) Advances in production management systems. International Federation for Information Processing, 246 . Springer, Boston, USA, pp. 355-362. ISBN 9780387741567 (doi:http://link.springer.com/chapter/10.1007/978-0-387-74157-4_42)

Bojarevics, Valdis ORCID: 0000-0002-7326-7748 , Easter, S., Roy, A. and Pericleous, Koulis A. ORCID: 0000-0002-7426-9999 (2009) Levitated liquid droplets in AC and DC magnetic field. In: Lee, Peter D., Mitchell, Alec and Williamson, Rod, (eds.) International Symposium on Liquid Metal Processing and Casting - LMPC 2009. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 319-326. ISBN 978-0-87339-743-8

Bojarevics, Valdis ORCID: 0000-0002-7326-7748 , Roy, A., Easter, S. and Pericleous, Koulis A. ORCID: 0000-0002-7426-9999 (2009) Magnetic damping of levitated liquid droplets in AC and DC field. 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN 978-3-936104-65-3

Bradley, M. S. A., Reed, A. R., Berry, R. and Holmes, C.P.M. (2008) Start-up and running forces on bulk solids feeders: experimental findings versus available models. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 450-457. ISBN 9788272062896

Chowdary, Boppana V., Sahatoo, Divesh R. and Bhatti, Raj (2007) Some STL file generation issues in rapid prototyping. In: Esparragoza, Ivan E., Bermudez, Manuel and Petrie, Maria Larrondo, (eds.) 5th Latin American and Caribbean Conference for Engineering and Technology Developing Entrepreneural Engineers for the Sustainable Growth of Latin American and Caribbean: Education, Innovation, Technology, and Practice. Latin American and Caribbean Consortium of Engineering Institutions, Florida. ISBN 098228960X

Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A., Berry, Rob and Kostuch, J. (2008) Caking strength of granulated clay under frozen conditions. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 604-609. ISBN 9788272062896

Doultsinou, Athanasia, Roy, Rajkumar, Baxter, David and Gao, James ORCID: 0000-0001-5625-3654 (2008) Key service issues in two UK manufacturing companies from a PSS perspective. Proceedings of the Cranfield Multi-Strand Conference: Creating Wealth Through Research and Innovation (CMC 2008): 6-7 May 2008. Cranfield University Press, Cranfield University, pp. 287-292. ISBN 9780955743672

Dupuis, Marc, Bojarevics, Valdis and Richard, Daniel (2008) Impact of the vertical potshell deformation on the MHD cell stability behavior of a 500 kA aluminium electrolysis cell. In: DeYoung, David H., (ed.) Light Metals 2008. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 409-412. ISBN 978-0-87339-710-0

Durairaj, Rajkumar, Mallik, Sabuj, Seman, Anton, Marks, Antony and Ekere, Ndy (2008) Investigation of wall-slip effect on paste release characteristic in flip-chip stencil printing process. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1328-1333. ISBN 9781424421176 (doi:https://doi.org/10.1109/EPTC.2008.4763615)

Eadie, R. and Gao, James ORCID: 0000-0001-5625-3654 (2008) An industrial implementation of a methodology for the optimisation of product design tolerances. In: Kai, Cheng, Makatsoris, Harris C. and Harrison, David, (eds.) Advances in manufacturing technology XXII: the proceedings of the 6th International Conference on Manufacturing Research ICMR08, 9th-11th September 2008, London UK. Brunel University College, Brunel University, pp. 161-170. ISBN 9781902316604

Easter, S., Bojarevics, Valdis ORCID: 0000-0002-7326-7748 and Pericleous, Koulis A. ORCID: 0000-0002-7426-9999 (2009) Determining surface tension using DC magnetic levitation. 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN 978-3-936104-65-3

Ermis, Ertan, Farnish, Richard J., Berry, Rob and Bradley, Michael S. A. (2008) Direct measurement of powder flavour adhesion on to a food surface using a novel adhesion tester. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 803-810. ISBN 9788272062896

Farnish, Richard J., Kulkarni, Prasanna and Bradley, Michael S. A. (2008) Segregation of bulk particulates through multiple process handling steps. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 505-510. ISBN 9788272062896

Gao, James ORCID: 0000-0001-5625-3654 , Baxter, David, Doultsinou, Nancy and Roy, Rajkumar (2007) Identification of service knowledge types for technical product-service systems. Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath, pp. 549-555.

Gao, James ORCID: 0000-0001-5625-3654 , Baxter, David and Roy, Rajkumar (2007) Specifying a design life cycle knowledge reuse framework part 1: manufacturing knowledge. Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.

Gao, James ORCID: 0000-0001-5625-3654 , Bradfield, Daniel J. and Soltan, Hossein (2007) Development of a tool to support the dissemination of information about knowledge in multilingual product development teams. In: Garetti, Marco, Terzi, Sergio, Ball, Peter D. and Han, Soonhung, (eds.) Proceedings of the International conference on product lifecycle management: assessing the industrial relevance. Inderscience Enterprises Ltd, Genva Aeroport, pp. 261-270. ISBN 9780907776321

Gao, James ORCID: 0000-0001-5625-3654 and Jian, Amanda (2007) A multi-agent based knowledge search methodology for product development. Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.

Gao, James ORCID: 0000-0001-5625-3654 and Kuang, Li (2007) A framework to integrate manufacturing information systems. In: Cunha, Pedro Filipe and Maropoulos, Paul G., (eds.) Digital enterprise technology perspectives and future challenges. Springer, New York, pp. 369-376. ISBN 9780387498638 (doi:https://doi.org/10.1007/978-0-387-49864-5)

Gao, James ORCID: 0000-0001-5625-3654 , Zhang, Pengcheng, Baxter, David and Kalta, Mo (2007) Developing a design process model for the reuse of knowledge. Proceedings of DET2007 4th International Conference on Digital Enterprise Technology Bath, United Kingdom 19-21 September 2007. University of Bath?, Bath.

Kao, Andrew ORCID: 0000-0002-6430-2134 , Pericleous, Koulis A. ORCID: 0000-0002-7426-9999 , Patel, Mayur and Voller, V. (2009) Thermoelectric MHD effects on equiaxed crystal morphology. 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN Forschungszentrum Dresden-Rossendorf

Kao, Andrew ORCID: 0000-0002-6430-2134 , Pericleous, Koulis A. ORCID: 0000-0002-7426-9999 , Patel, Mayur K. and Voller, Vaughan R. (2010) Thermoelectric effects on alloy solidification microstructure. In: Cockcroft, Steve L. and Maijer, Daan M., (eds.) Modeling of Casting, Welding, and Advanced Solidification Processes. John Wiley & Sons, Inc. / The Minerals, Metals & Materials Society, Warrendale, PA, USA, pp. 521-528. ISBN 978-0-87339-742-1 (hbk)

Marks, A.E., Mallik, S., Ekere, N.N. and Seman, A. (2008) Effect of temperature on slumping behaviour of lead-free solder paste and its rheological simulation. 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 829-832. ISBN 97814244-28137 (Print), 978-1-4244-2814-4 (Electronic) (doi:https://doi.org/10.1109/ESTC.2008.4684459)

Pericleous, Koulis A. ORCID: 0000-0002-7426-9999 , Djambazov, Georgi ORCID: 0000-0001-8812-1269 , Bojarevics, Valdis ORCID: 0000-0002-7326-7748 and Ward, R.M. (2009) A unified 3D model of the VAR process. In: Lee, Peter D., Mitchell, Alec and Williamson, Rod, (eds.) International Symposium on Liquid Metal Processing and Casting - LMPC 2009. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 21-28. ISBN 978-0-87339-743-8

Saghiri, Soroosh (2007) Critical role of supply chain decoupling point in mass customization from its upstream and downstream information systems point of view. In: Blecke, Thorsten and Friedrich, Gerhard, (eds.) Mass Customization Information Systems in Business. IGI Global, London, UK, pp. 185-196. ISBN 978-1-59904-039-4 (doi:https://doi.org/10.4018/978-1-59904-039-4)

Sahatoo, Divesh, Chowdary, Boppana V., Ali, Fahraz F. and Bhatti, Rajinderpal (2008) Slicing issues in CAD translation to STL in rapid prototyping. Proceedings of The 2008 IAJC-IJME International Conference. International Association of Journals and Conferences/International Journal of Modern Engineering, California State University, Northridge. ISBN 9781606433799

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) Development of an in-situ, non-destructive ultrasonic monitoring technique for solder pastes. 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 209-214. ISBN 9781424428137 (doi:https://doi.org/10.1109/ESTC.2008.4684351)

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) In-situ non-destructive ultrasonic rheology technique for monitoring different lead-free solder pastes for surface mount applications. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1448-1454. ISBN 9781424421176 (doi:https://doi.org/10.1109/EPTC.2008.4763635)

Shimasaki, S., Imanishi, K., Taniguchi, S. and Bojarevics, V. ORCID: 0000-0002-7326-7748 (2009) Manufacturing of uniformly-sized silicon particles for solar cell from molten metal jet by electromagnetic pinch force. 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN Forschungszentrum Dresden-Rossendorf

Taniguchi, S., Shimasaki, S., Park, J.S., Ueno, K. and Bojarevics, Valdis (2009) Prospect for EPM application to environmental technology. 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN 978-3-936104-65-3

Yuan, L., Lee, Peter D., Djambazov, Georgi ORCID: 0000-0001-8812-1269 and Pericleous, Koulis A. ORCID: 0000-0002-7426-9999 (2009) Multiscale modeling of the onset of freckle formation during vacuum arc remelting. In: Lee, Peter D., Mitchell, Alec and Williamson, Rod, (eds.) International Symposium on Liquid Metal Processing and Casting - LMPC 2009. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 39-46. ISBN 978-0-87339-743-8

Book

Gao, Xiaoyu ORCID: 0000-0001-5625-3654 , El Souri, Mohammed and Keates, Simeon ORCID: 0000-0002-2826-672X (2017) Advances in Manufacturing Technology XXXI. Advances in Transdisciplinary Engineering, 6 . IOS Press, Amsterdam. ISBN 978-1-61499-791-7

Edited Book

Gao, J. X. ORCID: 0000-0001-5625-3654 , Baxter, D. I. and Sackett, P. J. (eds.) (2005) Proceedings of the 3rd International Conference on Manufacturng Research ICMR2005: Advances in Manufacturing Technology and Management. Cranfield University Press, Bedford, UK. ISBN 1-86194-122-6

Conference Proceedings

Bailey, C. ORCID: 0000-0002-9438-3879 (2003) Exploiting virtual prototyping for reliability assessment. In: Proceedings of International IEEE Conference on the Business of Product Reliability and Liability. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 2-8. ISBN 078039853X

Baxter, David, Doultsinou, Athanasia, Roy, Rajkumar and Gao, James ORCID: 0000-0001-5625-3654 (2010) A life cycle model for product-service systems design. In: 5th International Conference on Digital Enterprise Technology. Publibook, Paris, France, pp. 441-456.

Bojarevics, V. ORCID: 0000-0002-7326-7748 and Pericleous, K. ORCID: 0000-0002-7426-9999 (2005) Nonlinear MHD stability of aluminium reduction cells. In: The 15th Riga and 6th PAMIRConference on Fundamental and Applied MHD. MHD-Online, Institute of Physics, University of Latvia, pp. 87-90.

El Souri, Mohammed, Gao, James ORCID: 0000-0001-5625-3654 , Owodunni, Oladele, Simmonds, Clive and Martin, Nick (2017) Improving design for manufacturing implementation in knowledge intensive collaborative environments - An analysis of organisational factors in aerospace manufacturing. In: 2017 IEEE Technology & Engineering Management Conference (TEMSCON). IEEE. ISBN 978-1-5090-1115-5 ISSN 978-1-5090-1114-8 (Online) (doi:https://doi.org/10.1109/TEMSCON.2017.7998417)

Gao, James ORCID: 0000-0001-5625-3654 , Arey, Daniel, Le, Chi Hieu ORCID: 0000-0002-5168-2297 and El Souri, Mohammed ORCID: 0000-0002-9651-7770 (2019) An investigation into the adoption of automation in the aerospace manufacturing industry. In: Advances in Manufacturing Technology XXXIII. Advances in Transdisciplinary Engineering, 9 . IOS Press, pp. 87-92. ISBN 978-1643680088 ISSN 2352-751X (Print), 2352-7528 (Online) (doi:https://doi.org/10.3233/ATDE190016)

Gao, James ORCID: 0000-0001-5625-3654 , Fei, Genyuan and Tang, X.Q. (2009) A TRIZ based methodology for the analysis of the coupling problems in complex engineering design. In: Proceedings of the 19th CIRP Design Conference – Competitive Design. Cranfield University Press, Cranfield University, pp. 285-292. ISBN 9780955743641

Harding, R. A., Wickins, M, Bojarevics, Valdis ORCID: 0000-0002-7326-7748 and Pericleous, Kyriacos ORCID: 0000-0002-7426-9999 (2003) Obtaining data to validate a model of an induction skull melting furnace. In: Modeling of Casting, Welding and Advanced Solidification Processes. TMS, Destin, FL, pp. 741-748. ISBN 0873395557

Harding, R.A., Wickins, M., Keough, G., Roberts, R.J., Pericleous, Kyriacos ORCID: 0000-0002-7426-9999 and Bojarevics, Valdis ORCID: 0000-0002-7326-7748 (2005) The use of combined DC and AC fields to increase superheat in an induction skull melting furnace. In: LMPC 2005 : proceedings of the 2005 international symposium on liquid metal processing and casting : Santa Fe, New Mexico, USA, September 18-21, 2005. ASM International, Materials Park, Ohio, USA, pp. 201-210. ISBN 0871708272; 978-087170827-4

Lin, Yong ORCID: 0000-0001-7118-2946 , Ieromonachou, Petros ORCID: 0000-0002-5842-9585 and Sun, Wenxian (2017) Smart manufacturing and supply chain management. In: Proceedings of the 6th IEEE International Conference on Logistics, Informatics and Service Sciences (LISS). IEEE. ISBN 978-1509011032 (doi:https://doi.org/10.1109/LISS.2016.7854383)

Mallik, Sabuj, Ekere, Ndy, Marks, Antony, Seman, Anton and Durairaj, Rajkumar (2008) Modelling of the time-dependent flow behaviour of lead-free solder pastes used for flip-chip assembly applications. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 1219-1224. ISBN 9781424428137 (doi:https://doi.org/10.1109/ESTC.2008.4684527)

Mallik, Sabuj, Schmidt, M., Bauer, R. and Ekere, Ndy (2008) Influence of solder paste components on rheological behaviour. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, USA, pp. 1135-1140. ISBN 9781424428137 (doi:https://doi.org/10.1109/ESTC.2008.4684512)

Naghi Ganji, Elmira, Shah, Satya and Coutroubis, Alec (2017) An evaluation of demand focused chain contribution to industrial sustainability. In: Advances in Manufacturing Technology XXXI: Proceedings of the 15th International Conference on Manufacturing Research. Advances in Transdisciplinary Engineering (6). IOS Press, pp. 359-364. ISBN 978-1-61499-791-7 ISSN 2352-751X (Print), 2352-7528 (Online) (doi:https://doi.org/10.3233/978-1-61499-792-4-359)

Narania, Sailesh, Eshahawi, Tarek, Gindy, Nabil, Tang, Ying Kit, Stoyanov, Stoyan ORCID: 0000-0001-6091-1226 , Ridout, Stephen and Bailey, Chris ORCID: 0000-0002-9438-3879 (2008) Risk mitigation framework for a robust design process. In: 2nd Electronics System-Integration Technology Conference, 2008. ESTC 2008. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1075-1080. ISBN 978-1-4244-2814-4 (Print), 978-1-4244-2813-7 (Online) (doi:https://doi.org/10.1109/ESTC.2008.4684501)

Rajaguru, Pushparajah ORCID: 0000-0002-6041-0517 , Santhanakrishnan, Manisekaran, Tilford, Tim ORCID: 0000-0001-8307-6403 and Bailey, Chris ORCID: 0000-0002-9438-3879 (2019) Design of additively manufactured heatsinks for power electronics thermal management using adjoint level-set topology optimization. In: 2019 25th International Workshop on Thermal Investigations of ICs and Systems (THERMINIC). IEEE. ISBN 978-1728120782 ISSN 2474-1515 (Print), 2474-1523 (Online) (doi:https://doi.org/10.1109/THERMINIC.2019.8923530)

Ramchurn, Adesh, El Souri, Mohammed ORCID: 0000-0002-9651-7770 , Gao, James ORCID: 0000-0001-5625-3654 , Le, Chi Hieu ORCID: 0000-0002-5168-2297 and Benetier, Julien (2019) An analysis of automation scenarios in an aerospace environmental testing facility. In: Advances in Manufacturing Technology XXXIII. Advances in Transdisciplinary Engineering, 9 . IOS Press, pp. 93-98. ISBN 978-1643680088 ISSN 2352-751X (Print), 2352-7528 (Online) (doi:https://doi.org/10.3233/ATDE190017)

Shah, Satya, Naghi Ganji, Elmira and Coutroubis, Alec (2017) Development of NPD portfolio management in project based environments. In: Advances in Manufacturing Technology XXXI: Proceedings of the 15th International Conference on Manufacturing Research. Advances in Transdisciplinary Engineering (6). IOS Press, pp. 409-414. ISBN 978-1-61499-791-7 ISSN 2352-751X (Print), 2352-7528 (Online) (doi:https://doi.org/10.3233/978-1-61499-792-4-409)

Tian, Wei and Zhou, Li ORCID: 0000-0001-7132-5935 (2012) Comparison of supply chain consigning collaborative innovation modes. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 407-411. ISSN 1022-6680 (doi:https://doi.org/10.4028/www.scientific.net/AMR.452-453.407)

Vu, Minh Duc, My, Chu Anh, Nguyen, The Nguyen, Le, Anh, Ta, Minh Thanh, Duong, Xuang Bien, Nguyen, Tien Anh, Le, Chi Hieu ORCID: 0000-0002-5168-2297 and Chu, Duc Hoang (2021) A conceptual digital twin for cost-effective development of a welding robotic system for smart manufacturing. In: Proceedings of the 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2020). Lecture Notes in Mechanical Engineering . Springer Nature, Cham, Switzerland, pp. 1018-1025. ISBN 978-3030696108 ISSN 2195-4356 (Print), 2195-4364 (Online) (doi:https://doi.org/10.1007/978-3-030-69610-8_134)

Wang, Hong, Djambazov, Georgi ORCID: 0000-0001-8812-1269 , Pericleous, Koulis A. ORCID: 0000-0002-7426-9999 , Harding, Richard A. and Wickins, Michael (2010) Modelling the tilt-casting process for the tranquil filling of titanium alloy turbine blades. In: Modeling of Casting, Welding, and Advanced Solidification Processes - XII (MCWASP XII). John Wiley and Sons, Inc. / The Minerals, Metals & Materials Society (TMS), Warrendale, PA, USA, pp. 53-60. ISBN 978-0-87339-742-1

Yuan, Lang, Lee, Peter D., Djambazov, Georgi ORCID: 0000-0001-8812-1269 and Pericleous, Koulis A. ORCID: 0000-0002-7426-9999 (2010) Three-dimensional simulation of the influence of convection on dendritic solidification. In: Modeling of Casting, Welding, and Advanced Solidification Processes - XII (MCWASP XII). John Wiley & Sons, Inc. / The Minerals, Metals & Materials Society, Warrendale, PA, USA, pp. 451-458. ISBN 978-0-87339-742-1 (hbk)

Zhou, Li ORCID: 0000-0001-7132-5935 and Tang, Ou (2009) Analysing dynamics of supply chain disruption. In: Proceedings of 20th International Conference on Production Research - Science and Technology to Promote Harmonized Production. University of Science and Technology of China Press, Hefei, Anhui, China.

Zhou, Li ORCID: 0000-0001-7132-5935 , Xie, Jiaping and Lin, Yong ORCID: 0000-0001-7118-2946 (2010) Forecasting returns in reverse logistics using GERT network theory. In: Responsive Manufacturing - Green Manufacturing (ICRM 2010). International Conference on Responsive Manufacturing - Green Manufacturing . IEEE Xplore Digital Library, Ningbo, pp. 349-356. (doi:https://doi.org/10.1049/cp.2010.0456)

Conference or Conference Paper

Adebanjo, Dotun ORCID: 0000-0003-4845-9411 , Teh, Pei-Lee and Ahmed, Pervaiz K. (2019) Improving manufacturing performance by developing innovative capabilities: the importance of supply chain relationships. In: 26th International Annual EurOMA Conference - "Operations adding value to Society", 17-19 June 2019, Helsinki, Finland.

Berry, R. J. and Bradley, M. S. A. (2010) Development of the Brookfield Powder Flow Tester. In: Bulk Solids Europe 2010 Conference and IMechE Symposium in New Frontiers in Bulk Materials Handling, 9-10 September 2010, Glasgow. (Unpublished)

Berry, Rob, Bradley, Michael S. A., Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction test procedure, suitable for equipment design and powder characterisation. In: ICBMH Conference: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, Australia. (Unpublished)

Bhatti, Rajinderpal and Berkhauer-Smith, Samantha (2007) Integrating both technical and cultural aspects of process improvement. In: 5th International Conference on Manufacturing Research (ICMR 2007), 11- 13 September 2007, De Montfort University Leicester. (Unpublished)

Bradley, Michael S. A., Berry, Rob, Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia. (Unpublished)

Bradley, Michael S.A., Berry, Rob, Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction tester and test procedure, suitable for equipment design and powder characterisation. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)

Bradley, Michael S.A., Farnish, Richard J., Reed, Alan R. and Kulkarni, Prasanna (2007) Evaluation of air induced segregation tendencies in pharmaceutical blends using a bench scale tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)

Djambazov, G. ORCID: 0000-0001-8812-1269 , Pericleous, K. ORCID: 0000-0002-7426-9999 , Lebon, B., Doh, Y., Jardy, A., Chapelle, P., Ghazal, G. and Gardin, P. (2011) Investigation of a possible route for oxygen transport via the metal droplets in top-blown steel converters. In: 2011 International Symposium on Liquid Metal Processing and Casting (LMPC), 25-28 September 2011, Nancy, France. (Unpublished)

Gueded, Jose and Mateus, Cesario (2009) Trade credit linkages along the supply chain: evidence for the Italian textile sector. In: European Financial Management Association 2009 Annual Meetings, 24-27 Jun 2009, Milan, Italy.

Owonikoko, A., Berry, R.J. and Bradley, M.S.A. (2010) Characterisation of extreme shape materials: “biomass and waste materials”. In: Bulk Solids Europe 2010 Conference and IMechE Symposium in New Frontiers in Bulk Materials Handling, 9-10 September 2010, Glasgow. (Unpublished)

Thesis

Angulo Pinzon, Oscar Andres (2012) Modelling of dosator filling and discharge. PhD thesis, University of Greenwich.

Berkhauer-Smith, Samantha (2009) The integration of lean thinking and manufacturing business improvement methods within the aerospace supply chain. PhD thesis, University of Greenwich.

Campbell, Andrew Paul (2002) Modelling of freeze layer formation and refractory wear in direct smelting process. PhD thesis, University of Greenwich.

Fei, Genyuan (2011) A methodology for engineering design change analysis using system modelling and knowledge management technologies. PhD thesis, University of Greenwich.

Hasan, Syed M. (2013) A collaborative framework for feasibility analysis in automotive product development with global supply chain. PhD thesis, University of Greenwich.

Jian, Guo (2011) Knowledge search for new product development: a multi-agent based methodology. PhD thesis, University of Greenwich.

Lawrence, James Andrew (2004) The prediction of bubble defects in castings. PhD thesis, University of Greenwich.

Mahmood, Ali (2013) Decision support for operational ERP systems implementation in small and medium enterprises. PhD thesis, University of Greenwich.

Saeed, Soran (2006) An investigation into establishing a generalised approach for defining similarity metrics between 3D shapes for case-based reasoning (CBR). PhD thesis, University of Greenwich.

Seman, Anton (2010) On-line non-destructive ultrasonic rheology measurement of solder pastes. PhD thesis, University of Greenwich.

Sharp, Mark (2008) Expectations of inefficiency in the built asset maintenance process. PhD thesis, University of Greenwich.

Tang, Ying Kit (2012) A risk analysis methodology for micro/nano manufacturing. PhD thesis, University of Greenwich.

Wang, Hong (2008) Numerical modelling of the tilt casting processes of titanium alumindes. PhD thesis, University of Greenwich.

Wild, Nigel Robert (2012) Ethical procurement strategies for international aid non-government organisations. PhD thesis, University of Greenwich.

Yin, Chunyan ORCID: 0000-0003-0298-0420 (2006) Experimental and modelling analysis on the performance of anisotropic conductive films as used in electronics packaging. PhD thesis, University of Greenwich.

Zhang, Pengcheng (2011) Requirement driven knowledge management system design to support automotive product development. PhD thesis, University of Greenwich.

Patent

The University Of Greenwich (2017) STENT WO 2016116748 A1. WO 2016116748 A1.