Items where Faculty / Department / Research Groups is "Department of Applied Engineering & Management"

University Structure (167)
- Faculty of Engineering & Science (167)
  - Department of Applied Engineering & Management (167)

Group by: Date | Creators | Item Type | Uncontrolled Keywords | No Grouping

3D numerical simulation 3D printing 5G 5G Communications accreditation Acoustic absorption Acoustic measurement acoustics Activity model Additive manufacturing Additive Manufacturing (AM) Adhesive manufacturing advanced adaptive system Advanced manufacturing technologies Aerated discharge Aerospace Aerospace and Defence Manufacturing Aerospace industry Aerospace Manufacturing Ageing population air filters Air injection Air-current segregation (ACS) All-optical push-broom AMI Android Anti-cancer drug treatment Arching Arginine Assistive technology Asthma Attrition authentication Authorization Automotive supply chain Automotive systems Baked goods supply chain bend erosion Best practices Big data Big data analytics Big Data Application Biological cells biomass Biomass storage silos Biomaterials biominerals Biosensor Bistability blend Bluetooth Body area networks Boeing bone bound states boundary scattering Brookfield powder flow tester Browsers Bulk solids business benefits Business competitions Business process Business process modelling Business process simulation C-RAN CAD/CAM/CIM caking strength Cancer Cancer cell Carbon Emission Case-based Reasoning cavity solitons cement CFD Change management characterisation Chronic Obstructive Pulmonary Disease Classification and regression tree (CART) Climate change Cloud computing CNC machine tool CNC machining Co-ordination Coconut fiber cohesion Collaboration Collaborative design Collaborative learning Collaborative product development Communication and collaboration Compactibility Competitive Learning Competitive Strategies complex Ginzburg–Landau equation Compressibility Computational modelling computer aided design and manufacturing Computer Aided Manufacturing Computer aided process planning Computer integrated manufacturing Computer numerical control machining Computer-aided process planning Computerised Tomography (CT) Conceptual design Concrete Condition monitoring Connected and Autonomous Vehicles construct design Content management system Content management systems Continuous extrusion Coping Cycle corrosion cosh-Gaussian travelling wave solution course content Cranial defects Cranioplasty implants critical incident Cross contamination crowdsensing Crowdsourcing cryptographic primitives cryptography Cure Customer Responsiveness Cyber-Physical Production Systems D2D Communications data pollution attack data pollution attacks Decision making Decision support system Deep brain activity Deep brain structures Deep learning deformation prediction Demand chain management Demand chain management (DCM) Demand-driven Supply Chain Denial of Service Attacks Dense particle suspension Dense-phase density and concentrations Design Design for Manufacture Design for manufacturing Design Knowledge Management design projects Design Reuse Digital Customisation Digital engineering technology digital manufacturing dilation dimensional tolerance Direct compression Discharge rate Discrete-event simulation Disintegration time Dispersed product development dissemination of sustainability results dissipative system DNA sensor Drawing processes dust capture Dust explosions dust filtration Dust generation mechanism Dustiness dynamic roughness e-Health Electrophysiological model EMC Emergent Nations EMI Emission Emissions empirical model Employability Employee Collaboration Enabling technologies encryption energy conservation Energy efficiency energy efficient tool design Energy modelling Energy Savings Energy Sector Energy Usage Engineering Education Ensemble model Enterprise 2.0 Enterprise integration Environment Environmental management Environmental management systems Environmental management systems (EMS) Environmental practices Environmental sustainability erosive wear euler-euler model Experiment Experimental Experimental test External clients extraction of hydrocarbons Extreme learning machine (ELM) Failure Fall detection Fine powders Finite element analysis (FEA) Flow function Flow property testing Fluidisation Food Processing Food supply chain Freeform Surfaces gas-particle flow Generalized epilepsy generative modeling geopolymers Global manufacturing Granular flow Granular mixing experiments Green Energy Green wall Green walls Group business project group work GSM (2G) handling Hands-on health benefit Heat transfer heat transfer fluid He’s variational method High Value Manufacturing Higher Education homomorphic MAC Homomorphic MACs homomorphic message authentication code Hopper design Host-based IDS HVAC Hybrid organisations hydraulic machinery hydraulic systems hydrogel ICT ICT adoption IIoT Impedance Imperfect preventive maintenance Implants improved performance Indomethacin Industrial IoT Industries Industry 4.0 industry engagement Information and communication technologies Information and knowledge management Information Technology Information technology (IT) Innovation and disruptive technolgy Innovation and knowledge management Innovation Management Innovative product development Inorganic excipients Integrated Framework Integrated strategies Integration Intelligent Transportation Systems Interaction with industry Internet of Things Internet of things (IoT) Intrusion Attacks Intrusion Detection IoT ISO method IT based strategies Jenike Method JIT key management Knowledge management Knowledge management knowledge management (KM) Knowledge reuse Knowledge sharing Lab on a Chip laboratories laboratory provision Large Factory Environment Laser Law Lean organisations Lean production Lean-phase Learning Learning practices Lessons learned Life cycle analysis (LCA) Lightweight authentication Limestone Liminal Space Linear stability analysis Living Green Wall Living Green Wall (LGW) Living plants Load Alteration Local model LTE (4G) Lung Function Testing m-Health M2M M2M Communications MAC-based scheme Machine Learning Machine tool maintenance Machine tool maintenance and service Magnetic Resonance Imaging (MRI) Maintenance Malware Detection Manufacturing Manufacturing and cost evaluation Manufacturing Environment Manufacturing Knowledge Manufacturing SMEs Manufacturing system Manufacturing systems Manufacturing systems and technology marine carbonate particles Mass Customisation mass-customisation Medical Device Medical Device market Medical Image Processing Medical instrumentation Medical technology Meta-learning Micro and nano manufacturing Micro-Blogging Microenterprises Microfluidic mineralization Mixing Mixing homogeneity Mobile Mobile communication Mobile handsets Mobile Intrusion Detection System Mobile Small Cells modelling Modelling Languages Modelling Tools Modular architecture Module delivery Monitoring data motivation MTC Multifunctional excipient Multilingual narrative network coding Network coding Network Secure Com-munications Network Segregation new caking tester New product development New Product Development (NPD) New product introduction NFC NI USRP noise absorption Noise reduction Nonlinear optics Numerical analysis NURBS OAuth 2.0 OAuth2 Older people Ontology Optical method Optimization optimized design method Organisational performance Out of autoclave processing parametric design Parametric sound Particle attrition Particle dynamics particle size particle solar receiver Particle technology Particles peer production peer review Peer-to-peer Performance improvement Performance measurement Permeability Personal Preferences Personal Types Pharmaceutical excipients Phase space and Bistability Physical activity monitoring pipe pipe acoustics Pipe corrosion pipe flow plastic caking PLM PM2.5 concentration prediction Pneumatic conveying pneumatic conveying pipelines pneumatic conveyors pneumatic machinery pollution attacks polymer extrusion die Polymer-matrix composites (PMCs) Powder fineness powder flow characterization Powder flow patterns and issues Powder manufacture Powder packing Powder preparation Powder recycling powders Power quality Pressure drop Price Integrity Privacy privacy-preserving Process control Process management Process monitoring Process Representation processing apparatus Procurement Practices Product and engineering design Product data and knowledge management Product data and lifecycle management Product design and manufacturing Product development Product development and manufacturing Product lifecycle management Product maintenance and service Product service system Product testing Product validation and testing Product-service systems Production planning Profile management system Project Management Protocols pseudonym-based signatures pseudonymity Pseudonyms public knowledge pumping machinery QoE QoS Quality of service Random linear network coding raw materials Real-life learning reliability remote patient monitoring Renewable energy Residual stress Respiratory Disease response surface methodology reverse jet cleaning RFID Ribbon blade blender Safety Scale-up validation Schulze ring shear tester secure communications secure network coding secure XOR network coding Security Segregation Semiconductor Supply Chain Sensors Servers Service sector Sewer pipes shear index Sheet metal processes shielding effect signature scheme Silicon carbide particles Silo Design sine wave Single cell Small and Medium Enterprises (SME) Small and medium enterprises (SMEs) Smart card technology Smart Cities Smart City Smart Grid Smart Home SME SMEs Social media Social projects social survey Software defined network software tools Soil & fertilizers Solar energy Solid dispersions Solids friction Sound barriers Spatial solitons SSL/TLS stability analysis statistical analysis Stent STEP Storage Storage silos Strategic Growth Strategic direction Strategic Growth Strength Student companies student recruitment Sulfuric acid Supply chain Supply chain innovation Supply chain management Supply Chain Management (SCM) Supply chain restructuring Supply Chain Risk Management Sustainability Sustainability performance improvement Sustainable demand chain management (SDCM) Sustainable development Sustainable energies sustainable machining Sustainable Manufacturing Sustainable practices Sustainable supply chain Sustainable Supply Chain Management (SSCM) Sustainable Supply Demand Chain (SSDC) System integration Systems engineering (SE) Tabletability tag pollution attack Tag pollution attacks Technological Innovation Technology Innovation Telecommunications Telecoms Industry Telehealth Temperature Distribution tensile strength Tensor model testing Time consolidation Time Consolidation Flow Function tissue engineering Torque Traffic Classification tubing & valves Ubiquitous healthcare Ubiquitous healthcare service delivery UMTS (3G) uniaxial compaction tester (UCT) unmanned vehicles Urban noise User Privacy Vehicular Ventilation Vertical garden Video Encoding Video sharing Vietnam Virtual enterprise Virtual teams Vortex shaker Wall region contact time Warren Spring model Water pipe WBANs Web 2.0 Wifi Wimax wireless Wireless networks Zigbee

Number of items at this level: 785.

3D numerical simulation

Benoit, Hadrien, Ansart, Renaud, Neau, Herve, García-Triñanes, Pablo ORCID: 0000-0002-4993-2250, Flamant, Gilles and Simonin, Olivier (2018) 3D numerical simulation of upflow bubbling fluidized bed in opaque tube under high flux solar heating. AIChE Journal, 64 (11). pp. 3857-3867. ISSN 0001-1541 (Print), 1547-5905 (Online) (doi:https://doi.org/10.1002/aic.16218)

3D printing

The University Of Greenwich (2017) STENT WO 2016116748 A1. WO 2016116748 A1.

5G

de Ree, Marcus, Mantas, Georgios, Radwan, Ayman, Rodriguez, Jonathan and Otung, Ifiok (2018) Key management for secure network coding-enabled mobile small cells. In: Broadband Communications, Networks, and Systems. 9th International EAI Conference, Broadnets 2018, Faro, Portugal, September 19–20, 2018, Proceedings. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering . Springer, pp. 327-336. ISBN 978-3030051945 ISSN 1867-822X (Online) (doi:https://doi.org/10.1007/978-3-030-05195-2_32)

5G Communications

Parsamehr, Reza, Mantas, Georgios, Radwan, Ayman, Rodriguez, Jonathan and Martínez, José-Fernán (2018) Security threats in network coding-enabled mobile small cells. In: Broadband Communications, Networks, and Systems. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering book series (LNICST) (263). Springer, Cham, Switzerland, pp. 337-346. ISBN 978-3030-051945 ISSN 1867-8211 (doi:https://doi.org/10.1007/978-3-030-05195-2_33)

Ribeiro, José, Mantas, Georgios, Saghezchi, Firooz B., Rodriguez, Jonathan, Shepherd, Simon J. and Abd-Alhameed, Raed A. (2018) Towards an autonomous host-based intrusion detection system for android mobile devices. In: Broadband Communications, Networks, and Systems. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering (LNICST) (263). Springer, Cham, Switzerland, pp. 139-148. ISBN 978-3030-051945 ISSN 1867-8211 (doi:https://doi.org/10.1007/978-3-030-05195-2_14)

Sucasas, Victor, Mantas, Georgios and Rodriguez, Jonathan (2016) Security challenges for cloud radio access networks. In: Huq, Kazi Mohammed Saidul and Rodriguez, Jonathan, (eds.) Backhauling/Fronthauling for Future Wireless Systems. Wiley-Blackwell, pp. 195-209. ISBN 978-1119170341 (doi:https://doi.org/10.1002/9781119170402.ch9)

accreditation

Brown, David J., Campbell, Grant M., Belton, Daniel J., Cox, Phil, García-Trinanes, Pablo ORCID: 0000-0002-4993-2250 and Tizaoui, Chedly (2019) New chemical engineering provision: Quality in diversity. Education for Chemical Engineers, 28. pp. 30-44. ISSN 1749-7728 (doi:https://doi.org/10.1016/j.ece.2019.02.002)

Acoustic absorption

Romanova, Anna, Horoshenkov, Kirill and Hurrell, Alistair (2018) An application of a parametric transducer to measure acoustic absorption of a living green wall. Applied Acoustics, 145. pp. 89-97. ISSN 0003-682X (doi:https://doi.org/10.1016/j.apacoust.2018.09.020)

Acoustic measurement

acoustics

Romanova, Anna and Horoshenkov, Kirill V. (2019) In-situ acoustic absorption of a living green wall. In: 47th International Congress and Exposition on Noise Control Engineering (INTERNOISE 2018): Impact of Noise Control Engineering. Curran Associates. ISBN 978-1510873032

Activity model

Ciurana, J., Ferrer, I. and Gao, J. X. ORCID: 0000-0001-5625-3654 (2006) Activity model and computer aided system for defining sheet metal process planning. Journal of Materials Processing Technology, 173 (2). pp. 213-222. ISSN 0924-0136 (doi:https://doi.org/10.1016/j.jmatprotec.2005.11.031)

Additive manufacturing

Shah, Satya, Mattiuzza, Stefano, Naghi Ganji, Elmira and Coutroubis, Alec (2017) Contribution of additive manufacturing systems to supply chain. In: Proceedings of the 2017 International Conference on Industrial Engineering, Management Science and Application (ICIMSA). IEEE, pp. 1-5. ISBN 978-1-5090-6336-9 ISSN 978-1-5090-6335-2 (Online) (doi:https://doi.org/10.1109/ICIMSA.2017.7985586)

Additive Manufacturing (AM)

Shah, Satya and Mattiuzza, Steffano (2018) Adoption of additive manufacturing approaches: The case of manufacturing SMEs. In: 2018 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC). IEEE. ISBN 978-1538614709 (doi:https://doi.org/10.1109/ICE.2018.8436257)

Adhesive manufacturing

Shah, Satya, Naghi Ganji, Elmira and Hasan, Syed (2016) An analysis of environmental management and sustainability in SMEs. WSEAS Transactions on Environment and Development, 12:a745815-054. pp. 353-365. ISSN 1790-5079 (Print), 2224-3496 (Online)

advanced adaptive system

Ilic, Dusan, Williams, Kenneth, Farnish, Richard, Webb, Erin and Liu, Gary (2018) On the challenges facing the handling of solid biomass feedstocks. Biofuels, Bioproducts and Biorefining, 12 (2). pp. 187-202. ISSN 1932-104X (Print), 1932-1031 (Online) (doi:https://doi.org/10.1002/bbb.1851)

Advanced manufacturing technologies

Gao, J. X. ORCID: 0000-0001-5625-3654, Baxter, D. I. and Sackett, P. J. (eds.) (2005) Proceedings of the 3rd International Conference on Manufacturng Research ICMR2005: Advances in Manufacturing Technology and Management. Cranfield University Press, Bedford, UK. ISBN 1-86194-122-6

Aerated discharge

Bianchini, A., Farnish, R.J., Gambuti, M. and Saccani, C. (2016) Predictive model for corn flour discharge rates through an aerated hopper. Powder Technology, 298. pp. 84-89. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2016.05.009)

Aerospace

El Souri, Mohammed, Gao, James ORCID: 0000-0001-5625-3654, Owodunni, Oladele, Simmonds, Clive and Martin, Nick (2018) A structured approach to defect data management for improving DFM implementation in aerospace manufacturing. International Journal of Product Lifecycle Management, 10 (4). ISSN 1743-5110 (Print), 1743-5129 (Online) (doi:https://doi.org/10.1504/IJPLM.2017.090330)

Aerospace and Defence Manufacturing

Evans, Richard, Gao, Xiaoyu ORCID: 0000-0001-5625-3654, Martin, Nick and Simmonds, Clive (2015) Integrating social knowledge and collaboration tools into dispersed product development. International Journal of Advanced Corporate Learning, 8 (2). pp. 20-27. ISSN 1867-5565 (Online) (doi:https://doi.org/10.3991/ijac.v8i2.4548)

Aerospace industry

El Souri, Mohammed, Gao, James ORCID: 0000-0001-5625-3654, Owodunni, Oladele, Simmonds, Clive and Martin, Nick (2017) Improving design for manufacturing implementation in knowledge intensive collaborative environments - An analysis of organisational factors in aerospace manufacturing. In: 2017 IEEE Technology & Engineering Management Conference (TEMSCON). IEEE. ISBN 978-1-5090-1115-5 ISSN 978-1-5090-1114-8 (Online) (doi:https://doi.org/10.1109/TEMSCON.2017.7998417)

Aerospace Manufacturing

Evans, Richard David, Gao, James Xiaoyu ORCID: 0000-0001-5625-3654, Mahdikhah, Sara, Messaadia, Mourad and Baudry, David (2016) Crowdsourcing user-contributed solutions to aerospace product development issues through micro-blogging. Electronic Journal of Knowledge Management, 14 (2). pp. 126-136. ISSN 1479-4411 (Print), 1479-4411 (Online)

Evans, Richard David, Gao, James Xiaoyu ORCID: 0000-0001-5625-3654, Martin, Nick and Simmonds, Clive (2017) A new paradigm for virtual knowledge sharing in product development based on emergent social software platforms. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture:095440541769. ISSN 0954-4054 (Print), 2041-2975 (Online) (doi:https://doi.org/10.1177/0954405417699018)

Ageing population

Le, Chi Hieu ORCID: 0000-0002-5168-2297, Lee, Raymond, Luo, Jin, Phan, Phi Anh, Le, Trung and Le, Minh Hoa (2017) Assistive technologies for the older people: Physical activity monitoring and fall detection. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer Singapore, pp. 102-105. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:https://doi.org/10.1007/978-981-10-4361-1)

air filters

Farnish, Richard, Beladi, Abdelhafid and Zigan, Stefan (2019) Investigation into the effects of cyclic particle loading onto filter media. In: ICBMH 2019. University of Newcastle, Australia.

Farnish, Richard, Belaidi, Hafid and Zigan, Stefan (2019) The effects of reverse jet pulse over-pressurisation on dust filter performance. In: ICBMH 2019. University of Newcastle, Australia.

Air injection

Air-current segregation (ACS)

Zigan, Stefan and Lulbadda Waduge, L.L. (2015) Analysis of airborne fines in cylindrical biomass storage silos. In: IV International Conference on Particle-Based Methods (PARTICLES 2015). International Centre for Numerical Methods in Engineering (CIMNE), Barcelona, Spain, pp. 900-908. ISBN 978-8494424472

All-optical push-broom

Kaur, Baldeep ORCID: 0000-0002-1762-3058 and Jana, Soumendu (2018) Cavity soliton molecules and all-optical push-broom effect. Journal of Lightwave Technology, 36 (12). pp. 2463-2470. ISSN 0733-8724 (Print), 1558-2213 (Online) (doi:https://doi.org/10.1109/JLT.2018.2815845)

AMI

Saghezchi, Firooz B., Mantas, Georgios, Ribeiro, José, Al-Rawi, Mohammed, Mumtaz, Shahid and Rodriguez, Jonathan (2017) Towards a secure network architecture for smart grids in 5G era. In: 2017 13th International Wireless Communications and Mobile Computing Conference (IWCMC). IEEE, pp. 121-126. ISBN 978-1509043736 ISSN 2376-6506 (Online) (doi:https://doi.org/10.1109/IWCMC.2017.7986273)

Android

Anti-cancer drug treatment

Nguyen, T. A., Nguyen, Tien V., Tran, D. T., Nguyen, Toan V., Le, C. H. ORCID: 0000-0002-5168-2297, Nguyen, V. B. and Le, H. Q. (2017) Microfluidic impedance biosensors for monitoring a single and multiple cancer cells in anticancer drug treatments. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer Singapore, pp. 681-685. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:https://doi.org/10.1007/978-981-10-4361-1_117)

Arching

Salehi, Hamid, Berry, Robert, Farnish, Richard and Bradley, Mike (2019) Temperature and time consolidation effect on the bulk flow properties and arching tendency of a detergent powder. Chemical Engineering & Technology, 43 (1). pp. 150-156. ISSN 0930-7516 (Print), 1521-4125 (Online) (doi:https://doi.org/10.1002/ceat.201900092)

Arginine

Elshaer, Amr, Kaialy, Waseem, Akhtar, Noreen, Lyire, Affiong, Hussain, Tariq, Alany, Raid and Mohammed, Afzal (2015) A methodological evaluation and predictive in silico investigation into the multi-functionality of arginine in directly compressed tablets. European Journal of Pharmaceutics and Biopharmaceutics, 96. pp. 272-281. ISSN 0939-6411 (Print), 0939-6411 (Online) (doi:https://doi.org/10.1016/j.ejpb.2015.07.028)

Assistive technology

Asthma

Le, C. H. ORCID: 0000-0002-5168-2297, Ann Phan, P., Quoc Le, H., Long Vo, D., Tuan Mai, A., Tam Le, N. and Hoa Le, M. (2017) Innovative development of the inspired sinewave device to measure lung functions and inhomogeneity for diagnosis and evaluations of early lung diseases. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer Singapore, pp. 649-654. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:https://doi.org/10.1007/978-981-10-4361-1_111)

Attrition

Chakravarty, Somik, Fischer, Marc, García-Triñanes, Pablo ORCID: 0000-0002-4993-2250, Dalle, Morgane, Meunier, Laurent, Aguerre-Chariol, Olivier, Le Bihan, Olivier and Morgeneyer, Martin (2018) Long-term dust generation from silicon carbide powders. Process Safety and Environmental Protection, 116. pp. 115-125. ISSN 0957-5820 (doi:https://doi.org/10.1016/j.psep.2018.01.021)

authentication

Sucasas, Victor, Mantas, Georgios, Althunibat, Saud, Oliveira, Leonardo, Antonopoulos, Angelos, Otung, Ifiok and Rodriguez, Jonathan (2018) A privacy-enhanced OAuth 2.0 based protocol for smart city mobile applications. Computers & Security, 74. pp. 258-274. ISSN 0167-4048 (doi:https://doi.org/10.1016/j.cose.2018.01.014)

Sucasas, Victor, Mantas, Georgios, Radwan, Ayman and Rodriguez, Jonathan (2017) A Lightweight Privacy-Preserving OAuth2-Based Protocol for Smart City Mobile Apps. In: 2016 IEEE Globecom Workshops (GC Wkshps). IEEE, pp. 1-6. ISBN 978-1509024834 (doi:https://doi.org/10.1109/GLOCOMW.2016.7848816)

Sucasas, Victor, Mantas, Georgios, Saghezchi, Firooz B., Radwan, Ayman and Rodriguez, Jonathan (2016) An autonomous privacy-preserving authentication scheme for intelligent transportation systems. Computers & Security, 60. pp. 193-205. ISSN 0167-4048 (doi:https://doi.org/10.1016/j.cose.2016.04.006)

Authorization

Automotive supply chain

Zammit, Joseph Paul, Gao, James ORCID: 0000-0001-5625-3654 and Evans, Richard (2017) The challenges of adopting PLM tools involving diversified technologies in the automotive supply chain. In: IFIP 14th International Conference on Product Lifecycle Management, 9-12 July 2017, Seville, Spain. (Unpublished)

Automotive systems

Saunders, Timothy (2017) A knowledge management framework to support the automotive systems engineering lifecycle. PhD thesis, University of Greenwich.

Baked goods supply chain

Shah, Satya and Naghi Ganji, Elmira (2017) Lean production and supply chain innovation in baked foods supplier to improve performance. British Food Journal. ISSN 0007-070X (doi:https://doi.org/10.1108/BFJ-03-2017-0122)

bend erosion

Macchini, R., Bradley, M.S.A. and Deng, T. ORCID: 0000-0003-4117-4317 (2013) Influence of particle size, density, particle concentration on bend erosive wear in pneumatic conveyors. Wear, 303 (1-2). pp. 21-29. ISSN 0043-1648 (doi:https://doi.org/10.1016/j.wear.2013.02.014)

Best practices

Dani, S., Harding, J. A., Case, K., Young, R. I. M., Cochrane, S., Gao, J. ORCID: 0000-0001-5625-3654 and Baxter, D. (2006) A methodology for best practice knowledge management. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 220 (10). pp. 1711-1728. ISSN 0954-4054 (Print), 2041-2975 (Online) (doi:https://doi.org/10.1243/09544054JEM651)

Big data

Shah, S., Bardon Soriano, C. and Coutroubis, A. D. (2018) Is Big Data for everyone? The challenges of Big Data adoption in SMEs. In: Proceedings of the 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE, pp. 803-807. ISBN 978-1-5386-0947-7 ISSN 2157-362X (Online) (doi:https://doi.org/10.1109/IEEM.2017.8290002)

Shah, Satya and Wiese, Jan (2018) Reality of big data adoption in supply chain for sustainable manufacturing SMEs. In: 2018 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC). IEEE. ISBN 978-1538614709 (doi:https://doi.org/10.1109/ICE.2018.8436343)

Big data analytics

Big Data Application

Biological cells

Nguyen, V. B., Le, C. H. ORCID: 0000-0002-5168-2297, Zhang, Z., Lee, R., Nguyen, T. A. and Packianather, M. S. (2017) Recent advances in experimental testing and computational modelling for characterisation of mechanical properties of biomaterials and biological cells. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer, Singapore, pp. 655-660. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:https://doi.org/10.1007/978-981-10-4361-1_112)

biomass

Ton, Bram T., Farnish, Richard J. and Zigan, Stefan (2015) Resolving lateral segregation effects of static blenders. In: IV International Conference on Particle-Based Methods (PARTICLES 2015). International Centre for Numerical Methods in Engineering (CIMNE), Barcelona, Spain, pp. 714-721. ISBN 978-8494424472

Biomass storage silos

Biomaterials

biominerals

Diaz-Rodriguez, P., García-Triñanes, P. ORCID: 0000-0002-4993-2250, Echezarreta-López, M. M., Santoveña, A. and Landin, M. (2018) Mineralized alginate hydrogels using marine carbonates for bone tissue engineering applications. Carbohydrate Polymers, 195. pp. 235-242. ISSN 0144-8617 (Print), 1879-1344 (Online) (doi:https://doi.org/10.1016/j.carbpol.2018.04.101)

Biosensor

Le, C. H. ORCID: 0000-0002-5168-2297, Mai, A. T., Phan, P. A., Le, H. Q., Le, T. and Packianather, M.S. (2017) Detection and monitoring of cancers with biosensors in Vietnam. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer, Singapore, pp. 687-691. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:https://doi.org/10.1007/978-981-10-4361-1_118)

Bistability

Kaur, Baldeep ORCID: 0000-0002-1762-3058 and Jana, Soumendu (2017) Generation and dynamics of one-and two-dimensional cavity solitons in a vertical-cavity surface-emitting laser with a saturable absorber and frequency-selective feedback. Journal of the Optical Society of America B, 34 (7). pp. 1374-1385. ISSN 0740-3224 (Print), 1520-8540 (Online) (doi:https://doi.org/10.1364/JOSAB.34.001374)

blend

Zigan, Stefan, Hettiaratchi, Kaushika and Milledge, John J. ORCID: 0000-0003-0252-6711 (2017) Evaluate the blend quality of powders using a simplified mixing law. In: Reliable Flow of Particulate Solid V (RELPOWFLO V), 13-15 June 2017, Skien, Norway.

Bluetooth

Qureshi, Athar (2015) Interference diagnosis in wireless systems by using NI USRP. International Journal of Simulation: Systems, Science and Technology, 16 (6). 10.1-10.10. ISSN 1473-8031 (Print), 1473-804x (Online) (doi:https://doi.org/10.5013/IJSSST.a.16.06.10)

Body area networks

Andriopoulou, Foteini, Birkos, Konstantinos, Mantas, Georgios and Lymberopoulos, Dimitrios (2018) Software-defined networking for ubiquitous healthcare service delivery. In: Broadband Communications, Networks, and Systems. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering (LNICST) (263). Springer, Cham, Switzerland, pp. 95-104. ISBN 978-3030051945 ISSN 1867-8211 (doi:https://doi.org/10.1007/978-3-030-05195-2_10)

Boeing

Naghi Ganji, Elmira, Shah, Satya and Coutroubis, Alec (2017) Bridging new product development with sustainable supply chain management practices. International Journal of Economics and Management Systems, 2. pp. 178-186. ISSN 2367-8925

Naghi Ganji, Elmira, Shah, Satya and Coutroubis, Alec (2017) Case study analysis of sustainable supply chain redesign linking with new product development. WSEAS Transactions on Business and Economics, 14:22. pp. 193-205. ISSN 1109-9526 (Print), 2224-2899 (Online)

bone

bound states

boundary scattering

Romanova, Anna V., Horoshenkov, Kirill V. and Krynkin, Anton (2018) Dynamically rough boundary scattering effect on a propagating continuous acoustical wave in a circular pipe with flow. Sensors, 18:1098. ISSN 1424-8220 (Online) (doi:https://doi.org/10.3390/s18041098)

Brookfield powder flow tester

García-Triñanes, Pablo ORCID: 0000-0002-4993-2250, Luding, Stefan and Shi, Hao (2019) Tensile strength of cohesive powders. Advanced Powder Technology, 30 (12). pp. 2868-2880. ISSN 0921-8831 (Print), 1568-5527 (Online) (doi:https://doi.org/10.1016/j.apt.2019.08.017)

Browsers

Bulk solids

Ribeiro, Kandice Suane Barros, Farnish, Richard J. and Coelho, Reginaldo Teixeira (2019) Evaluation of the Restricted Air Entry on the Discharge Rate from Silos. In: 25th ABCM International Congress of Mechanical Engineering, 20-25 October 2019, Uberlandia, MG, Brazil.

business benefits

Romanova, Anna and Salah, Ghofran (2018) Social study on public awareness of the Living Green Wall health benefits. In: ABC: Activating Biophilic Cities, 4-5 September 2018, University of Greenwich. (Unpublished)

Business competitions

Shah, Satya, Al-Badri, Sara and Hasan, Syed (2015) Use of business competitions to enhance student employability in Higher Education. In: Recent Advances in Educational Technologies: Proceedings of the 2015 International Conference on Education and Modern Educational Technologies (EMET 2015). Educational Technologies Series, 18 (18). WSEAS, Greece, pp. 140-147. ISBN 978-1-61804-322-1 ISSN 2227-4618

Business process

Gao, J. X. ORCID: 0000-0001-5625-3654 and Bradfield, D. J. (2007) A methodology to facilitate knowledge sharing in the new product development process. International Journal of Production Research, 45 (7). pp. 1489-1504. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:https://doi.org/10.1080/00207540600942227)

Business process modelling

Hasan, Syed M. and Shah, Satya (2013) An overview of change management within manufacturing environment. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 1205-1209. ISSN 1022-6680 (Print), 1662-8985 (Online) (doi:https://doi.org/10.4028/www.scientific.net/AMR.816-817.1205)

Business process simulation

C-RAN

CAD/CAM/CIM

caking strength

Salehi, Hamid, Berry, Robert, Deng, Tong ORCID: 0000-0003-4117-4317, Larsson, Sylvia H., Farnish, Richard and Bradley, Mike (2019) Development and application of a novel cake strength tester. Powder Technology, 350. pp. 36-42. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2019.03.024)

Cancer

Cancer cell

Carbon Emission

Shah, Satya, Olajide Ojo, Olumide, Naghi Ganji, Elmira and Kadry Idris Abdellah, Ahmed (2017) Impact of sustainable energy savings in Nigerian telecoms industry. In: International Journal of Renewable Energy Sources. IARAS (International Association of Research and Science), pp. 27-35. ISSN 2367-9123

Case-based Reasoning

Wan, Shan, Li, Dongbo, Gao, James ORCID: 0000-0001-5625-3654 and Li, Jing (2019) A knowledge based machine tool maintenance planning system Using case-based reasoning techniques. Robotics and Computer-Integrated Manufacturing, 58. pp. 80-96. ISSN 0736-5845 (doi:https://doi.org/10.1016/j.rcim.2019.01.012)

cavity solitons

cement

Criado, Maria, Bernal, Susan A., García-Triñanes, Pablo ORCID: 0000-0002-4993-2250 and Provis, John L. (2017) Influence of slag composition on the stability of steel in alkali-activated cementitious materials. Journal of Materials Science. ISSN 0957-4530 (Print), 1573-4838 (Online) (doi:https://doi.org/10.1007/s10853-017-1919-3)

CFD

Lulbadda Waduge, L.L., Zigan, S., Stone, L.E., Belaidi, A. and García-Triñanes, P. ORCID: 0000-0002-4993-2250 (2016) Predicting concentrations of fine particles in enclosed vessels using a camera based system and CFD simulations. Process Safety and Environmental Protection, 105. pp. 262-273. ISSN 0957-5820 (Print), 1744-3598 (Online) (doi:https://doi.org/10.1016/j.psep.2016.11.013)

Change management

characterisation

Chronic Obstructive Pulmonary Disease

Classification and regression tree (CART)

Shang, Zhigen, Deng, Tong ORCID: 0000-0003-4117-4317, He, Jianqiang and Duan, Xiaohui (2018) A novel model for hourly PM2.5 concentration prediction based on CART and EELM. Science of The Total Environment, 651 (2). pp. 3043-3052. ISSN 0048-9697 (Print), 1879-1026 (Online) (doi:https://doi.org/10.1016/j.scitotenv.2018.10.193)

Climate change

Ojo, O. O., Shah, S. and Coutroubis, A. D. (2018) An overview of sustainable practices in food processing supply chain environments. In: Proceedings of the 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE, pp. 1792-1796. ISBN 978-1-5386-0949-1 ISSN 2157-362X (Online) (doi:https://doi.org/10.1109/IEEM.2017.8290200)

Ojo, Olumide, Shah, Satya and Coutroubis, Alec (2017) Study of energy savings and sustainable practices adoption in telecommunication services. WSEAS Transactions on Communications, 16:19. pp. 159-168. ISSN 1109-2742 (Print), 2224-2864 (Online)

Cloud computing

Karavatselou, Evy, Fengou, Maria-Anna, Mantas, Georgios and Lymberopoulos, Dimitrios (2018) Profile Management System in Ubiquitous Healthcare Cloud Computing Environment. In: Broadband Communications, Networks, and Systems. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering book series (LNICST) (263). Springer, Cham, Switzerland, pp. 105-114. ISBN 978-3030051945 ISSN 1867-8211 (doi:https://doi.org/10.1007/978-3-030-05195-2_11)

CNC machine tool

CNC machining

Liu, Xu, Li, Yingguang and Gao, James ORCID: 0000-0001-5625-3654 (2016) A multi-perspective dynamic feature concept in adaptive NC machining of complex freeform surfaces. The International Journal of Advanced Manufacturing Technology, 82 (5-8). pp. 1259-1268. ISSN 0268-3768 (Print), 1433-3015 (Online) (doi:https://doi.org/10.1007/s00170-015-7456-9)

Co-ordination

Hasan, Syed M. and Shah, Satya (2013) Use of process modelling in product development integration within manufacturing environment. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 1210-1214. ISSN 1022-6680 (Print), 1662-8985 (Online) (doi:https://doi.org/10.4028/www.scientific.net/AMR.816-817.1210)

Coconut fiber

Salah, Ghofran M. J. A. and Romanova, Anna (2017) Coconut fibre as an alternative growth compound for Living Green Walls. In: The Second Medway Engineering Conference on Systems Efficiency, Sustainability and Modelling, Tuesday, 6th June 2017, University of Greenwich, Chatham Maritime ME4 4TB.

cohesion

Collaboration

Hasan, Syed, Khan, S. and Shah, Satya (2018) Supply chain performance improvement within collaborative product development environment. International Journal of Business Performance and Supply Chain Modelling, 9 (4). pp. 261-279. ISSN 1758-9401 (Print), 1758-941X (Online) (doi:https://doi.org/10.1504/IJBPSCM.2017.10012512)

Zammit, Joseph Paul, Gao, James ORCID: 0000-0001-5625-3654 and Evans, Richard (2016) Capturing and sharing product development knowledge using storytelling and video sharing. Procedia CIRP, 56. pp. 440-445. ISSN 2212-8271 (doi:https://doi.org/10.1016/j.procir.2016.10.081)

Zammit, Joseph Paul, Gao, James ORCID: 0000-0001-5625-3654, Evans, Richard and Maropoulos, Paul (2017) A knowledge capturing and sharing framework for improving the testing processes in global product development using storytelling and video sharing. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ISSN 0954-4054 (Print), 2041-2975 (Online) (doi:https://doi.org/10.1177/0954405417694062)

Collaborative design

El Souri, Mohammed, Gao, James ORCID: 0000-0001-5625-3654 and Simmonds, Clive (2019) Integrating manufacturing knowledge with design process to improve quality in aerospace industry. In: Procedia CIRP: 29th CIRP Design Conference 2019 08-10 May 2019, Povoa de Varzim, Portugal. Elsevier, pp. 374-379. ISSN 2212-8271 (doi:https://doi.org/10.1016/j.procir.2019.04.179)

Collaborative learning

Collaborative product development

Aziz, Hayder, Gao, James ORCID: 0000-0001-5625-3654, Maropoulos, Paul and Cheung, Wai M. (2005) Open standard, open source and peer-to-peer tools and methods for collaborative product development. Computers in Industry, 56 (3). pp. 260-271. ISSN 0166-3615 (doi:https://doi.org/10.1016/j.compind.2004.12.002)

Communication and collaboration

Zammit, Joseph Paul, Gao, James ORCID: 0000-0001-5625-3654 and Evans, Richard (2016) Development of a knowledge sharing framework for improving the testing processes in global product development. International Journal of Product Lifecycle Management, 9 (1). p. 1. ISSN 1743-5110 (Print), 1743-5129 (Online) (doi:https://doi.org/10.1504/IJPLM.2016.078853)

Compactibility

Competitive Learning

Competitive Strategies

Shah, Satya and Hasan, Syed (2016) Procurement practices in project based manufacturing environments. In: MATEC Web of Conferences. Systems, 76 (02007). Matec, Greece. ISSN 2261-236X (Online) (doi:https://doi.org/10.1051/matecconf/20167602007)

complex Ginzburg–Landau equation

Kaur, Baldeep ORCID: 0000-0002-1762-3058 and Jana, Soumendu (2016) A generic travelling wave solution in dissipative laser cavity. Pramana, 87 (4):53. ISSN 0304-4289 (Print), 0973-7111 (Online) (doi:https://doi.org/10.1007/s12043-016-1244-4)

Compressibility

Computational modelling

computer aided design and manufacturing

Li, Yingguang, Gao, James ORCID: 0000-0001-5625-3654 and Lee, Chen-Han (2015) Special issue on Computational Numerical Control Machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229 (7). pp. 1085-1086. ISSN 0954-4054 (Print), 2041-2975 (Online) (doi:https://doi.org/10.1177/0954405415592117)

Computer Aided Manufacturing

Computer aided process planning

Computer integrated manufacturing

Gao, Jx ORCID: 0000-0001-5625-3654, Aziz, Hayder, Maropoulos, Paul and Cheung, Denny (2003) Application of product data management technologies for enterprise integration. International Journal of Computer Integrated Manufacturing, 16 (7-8). pp. 491-500. ISSN 0951-192X (Print), 1362-3052 (Online) (doi:https://doi.org/10.1080/0951192031000115813)

Computer numerical control machining

Computer-aided process planning

Sharma, R. and Gao, J. X. ORCID: 0000-0001-5625-3654 (2006) A knowledge-based manufacturing and cost evaluation system for product design/re-design. The International Journal of Advanced Manufacturing Technology, 33 (9-10). pp. 856-865. ISSN 0268-3768 (Print), 1433-3015 (Online) (doi:https://doi.org/10.1007/s00170-006-0530-6)

Computerised Tomography (CT)

Le, C. H. ORCID: 0000-0002-5168-2297, Pham, B. M., Tran, D. T., Lam, K., Le, T. H., Vo, D. L., Mengistu, S. and Packianather, M. S. (2017) An integrated system and framework for development of medical applications and products based on medical imaging data. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer, Singapore, pp. 363-368. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:https://doi.org/10.1007/978-981-10-4361-1_61)

Pham, B. M., Le, C. H. ORCID: 0000-0002-5168-2297, Do, N. T., Vo, D. L., Le, T., Lee, R., Packianather, M. S. and Mengistu, S. (2017) Cost-effective solutions and tools for medical image processing and design of personalised cranioplasty implants. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer, Singapore, pp. 397-402. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:https://doi.org/10.1007/978-981-10-4361-1_67)

Conceptual design

Concrete

Romanova, A. and Coutroubis, A. D. (2017) HRC method to measure concrete sewer pipe corrosion rate induced by sulphuric acid environment: temperature and pH. In: 4th IWA/IAHR International Conference on Urban Drainage (ICUD), 10-15 September 2017, Prague, Czech Republic.

Romanova, Anna (2015) Corrosion induced by sulfuric acid – method of concrete material properties upgrade? In: Faculty of Engineering and Science, Research Symposium, 16 September 2015, Pembroke Wardroom, Medway School of Pharmacy. (Unpublished)

Condition monitoring

Li, Yingguang, Liu, Changqing, Hua, Jiaqi, Gao, James ORCID: 0000-0001-5625-3654 and Maropoulos, Paul (2019) A novel method for accurately monitoring and predicting tool wear under varying cutting conditions based on meta-learning. CIRP Annals ‐ Manufacturing Technology, 68 (1). pp. 487-490. ISSN 0007-8506 (doi:https://doi.org/10.1016/j.cirp.2019.03.010)

Connected and Autonomous Vehicles

Shah, Satya, Mabbott, Owen, Naghi Ganji, Elmira and Bate, Jordan (2018) Innovation and I4.0 management in connected and autonomous automotive manufacturing. In: 2018 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC). IEEE. ISBN 978-1538614709 (doi:https://doi.org/10.1109/ICE.2018.8436262)

construct design

Sparrow, R. D, Adekunle, A. A., Berry, R. J. and Farnish, R. J. (2016) A novel block cipher design paradigm for secured communication. In: 2016 Annual IEEE 10th International Systems Conference (SysCon). IEEE, Florida, United States of America, pp. 1-6. ISBN 978-1-4673-9519-9 (doi:https://doi.org/10.1109/SYSCON.2016.7490659)

Content management system

Wan, Shan, Li, Dongbo, Gao, James ORCID: 0000-0001-5625-3654, Roy, Rajkumar and He, Fei (2016) A collaborative machine tool maintenance planning system based on content management technologies. The International Journal of Advanced Manufacturing Technology, 94 (5-8). pp. 1639-1653. ISSN 0268-3768 (Print), 1433-3015 (Online) (doi:https://doi.org/10.1007/s00170-016-9829-0)

Wan, Shan, Li, Dongbo, Gao, Xiaoyu ORCID: 0000-0001-5625-3654, Roy, Rajkumar and Tong, Yifei (2016) Process and knowledge management in a collaborative maintenance planning system for high value machine tools. Computers in Industry, 84. pp. 14-24. ISSN 0166-3615 (doi:https://doi.org/10.1016/j.compind.2016.11.002)

Content management systems

Wan, Shan, Li, Dongbo and Gao, James ORCID: 0000-0001-5625-3654 (2016) Exploring the advantages of content management systems for managing engineering knowledge in product-service systems. Procedia CIRP, 56. pp. 446-450. ISSN 2212-8271 (doi:https://doi.org/10.1016/j.procir.2016.10.087)

Continuous extrusion

Maniruzzaman, M., Nair, A., Scoutaris, N., Bradley, Michael S.A., Snowden, M.J. ORCID: 0000-0002-1087-2692 and Douroumis, D. ORCID: 0000-0002-3782-0091 (2015) One-step continuous extrusion process for the manufacturing of solid dispersions. International Journal of Pharmaceutics Special Issue on "Continuous Manufacturing and Process Analytical Tools”, 496 (1). pp. 42-51. ISSN 0378-5173 (Print), 1873-3476 (Online) (doi:https://doi.org/10.1016/j.ijpharm.2015.09.048)

Coping Cycle

Kofinas, Alexander, Romanova, Anna, Tsay, Han-Huei (Crystal) ORCID: 0000-0003-4959-0411 and Ahmed, Sajeel (2018) Coping Cycle and its importance when designing an Assessment: Reflections on the Learning Process. In: Learning, Teaching and Student Experience, 24 - 25 April 2018, Glasgow. (In Press)

corrosion

cosh-Gaussian travelling wave solution

course content

Cranial defects

Cranioplasty implants

critical incident

Romanova, Anna (2018) Barriers in the Peer Review Process: overcoming the distress using a Critical Incidents Approach. In: SRHE International Conference on Research into Higher Education. Taylor & Francis. (In Press)

Romanova, Anna (2018) Overcoming Liminality in Peer Review. In: Medway Festival of Learning & Teaching, Thursday 13 September, 2018, Medway Campus - Pilkington Building.

Cross contamination

Bradley, Mike and Wardle, J. P. (2019) Powder Flow in the AM Process: Understanding its impact and potential problems. In: IDTechEX, 10-11 April 2019, Estrel Convention Center, Berlin, Germany. (Unpublished)

crowdsensing

Sucasas, Victor, Mantas, Georgios, Bastos, Joaquim, Damiao, Francisco and Rodriguez, Jonathan (2019) A signature scheme with unlinkable-yet-accountable pseudonymity for privacy-preserving crowdsensing. IEEE Transactions on Mobile Computing, 18. p. 1. ISSN 1536-1233 (doi:https://doi.org/10.1109/TMC.2019.2901463)

Crowdsourcing

Evans, Richard D., Gao, James X. ORCID: 0000-0001-5625-3654, Mahdikhah, Sara, Messaadia, Mourad and Baudry, David (2016) A review of crowdsourcing literature related to the manufacturing industry. Journal of Advanced Management Science, 4 (3). pp. 224-231. ISSN 2168-0787 (doi:https://doi.org/10.12720/joams.4.3.224-231)

cryptographic primitives

Sparrow, R. D, Adekunle, A. A. and Berry, R. J. (2017) LEOPARD lightweight encryption operation permutation addition rotation and diffusion. In: IEEE 10th International Conferences on Signal Processing and Communication Systems. IEEE, pp. 1-5. ISBN 978-1-5090-0941-1 (doi:https://doi.org/10.1109/ICSPCS.2016.7843322)

cryptography

Cure

Gao, Xiaoyu ORCID: 0000-0001-5625-3654 (2017) A multi-pattern compensation method to ensure even temperature in composite materials during microwave curing process. Composites Part A: Applied Science and Manufacturing. ISSN 1359-835X (doi:https://doi.org/10.1016/j.compositesa.2017.12.17)

Li, Nanya, Li, Yingguang, Jelonnek, John, Link, Guido and Gao, James ORCID: 0000-0001-5625-3654 (2017) A new process control method for microwave curing of carbon fibre reinforced composites in aerospace applications. Composites Part B: Engineering, 122. pp. 61-70. ISSN 1359-8368 (doi:https://doi.org/10.1016/j.compositesb.2017.04.009)

Customer Responsiveness

Naghi Ganji, Elmira, Shah, Satya and Coutroubis, Alec (2018) Mass customisation and technology functions: Enhancing market responsiveness. In: 2018 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC). IEEE. ISBN 978-1538614709 (doi:https://doi.org/10.1109/ICE.2018.8436313)

Cyber-Physical Production Systems

Saghezchi, Firooz B., Mantas, Georgios, Ribeiro, José, Esfahani, Alireza, Alizadeh, Hassan, Bastos, Joaquim and Rodriguez, Jonathan (2018) Machine Learning to Automate Network Segregation for Enhanced Security in Industry 4.0. In: Broadband Communications, Networks, and Systems. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering book series (LNICST) (263). Springer, Cham, Switzerland, pp. 149-158. ISBN 978-3030051945 ISSN 1867-8211 (doi:https://doi.org/10.1007/978-3-030-05195-2_15)

D2D Communications

data pollution attack

Esfahani, Alireza, Mantas, Georgios, Monteiro, Valdemar, Ramantasy, Kostas, Datsikay, Eftychia and Rodriguez, Jonathan (2016) Analysis of a Homomorphic MAC-based scheme against tag pollution in RLNC-enabled wireless networks. In: 2015 IEEE 20th International Workshop on Computer Aided Modelling and Design of Communication Links and Networks (CAMAD). IEEE, pp. 156-160. ISBN 978-1467381864 (doi:https://doi.org/10.1109/CAMAD.2015.7390500)

Esfahani, Alireza, Mantas, Georgios, Rodriguez, Jonathan and Neves, José Carlos (2016) An efficient homomorphic MAC-based scheme against data and tag pollution attacks in network coding-enabled wireless networks. International Journal of Information Security, 16 (6). pp. 627-639. ISSN 1615-5262 (Print), 1615-5270 (Online) (doi:https://doi.org/10.1007/s10207-016-0351-z)

data pollution attacks

Esfahani, Alireza, Yang, Du, Mantas, Georgios, Nascimento, Alberto and Rodriguez, Jonathan (2015) Dual-homomorphic message authentication code scheme for network coding-enabled wireless sensor networks. International Journal of Distributed Sensor Networks, 11 (7):510251. ISSN 1550-1329 (Print), 1550-1477 (Online) (doi:https://doi.org/10.1155/2015/510251)

Decision making

Decision support system

Deep brain activity

Tran, Q., Le, T., Le, C. H. ORCID: 0000-0002-5168-2297 and Vo, T. V. (2017) Electrophysiological modeling in generalized epilepsy using surface EEG and anatomical brain structures. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer Nature Singapore Pte Ltd, pp. 699-704. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:https://doi.org/10.1007/978-981-10-4361-1_120)

Deep brain structures

Deep learning

Zhao, Zhiwei, Li, Yingguang, Liu, Changqing and Gao, James ORCID: 0000-0001-5625-3654 (2019) On-line part deformation prediction based on deep learning. Journal of Intelligent Manufacturing, 31 (3). pp. 561-574. ISSN 0956-5515 (Print), 1572-8145 (Online) (doi:https://doi.org/10.1007/s10845-019-01465-0)

deformation prediction

Demand chain management

Naghi Ganji, Elmira, Shah, Satya and Coutroubis, Alec (2017) An evaluation of demand focused chain contribution to industrial sustainability. In: Advances in Manufacturing Technology XXXI: Proceedings of the 15th International Conference on Manufacturing Research. Advances in Transdisciplinary Engineering (6). IOS Press, pp. 359-364. ISBN 978-1-61499-791-7 ISSN 2352-751X (Print), 2352-7528 (Online) (doi:https://doi.org/10.3233/978-1-61499-792-4-359)

Naghi Ganji, Elmira, Shah, Satya and Coutroubis, Alec (2017) The role of sustainable new product development in demand driven chains. In: Proceedings of the 2017 International Conference on Industrial Engineering, Management Science and Application (ICIMSA). IEEE, pp. 1-5. ISBN 978-1-5090-6336-9 ISSN 978-1-5090-6335-2 (Online) (doi:https://doi.org/10.1109/ICIMSA.2017.7985611)

Shah, Satya, Naghi Ganji, Elmira and Coutroubis, Alec (2017) Development of NPD portfolio management in project based environments. In: Advances in Manufacturing Technology XXXI: Proceedings of the 15th International Conference on Manufacturing Research. Advances in Transdisciplinary Engineering (6). IOS Press, pp. 409-414. ISBN 978-1-61499-791-7 ISSN 2352-751X (Print), 2352-7528 (Online) (doi:https://doi.org/10.3233/978-1-61499-792-4-409)

Demand chain management (DCM)

Naghi Ganji, Elmira, Shah, Satya and Coutroubis, Alec (2018) DCM 4.0: Integration of industry 4.0 and demand chain in global manufacturing. In: 2018 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC). IEEE. ISBN 978-1538614709 (doi:https://doi.org/10.1109/ICE.2018.8436383)

Demand-driven Supply Chain

Denial of Service Attacks

Dense particle suspension

García-Triñanes, P. ORCID: 0000-0002-4993-2250, Seville, J.P.K., Ansart, R., Benoit, H., T.W., Leadbeater and D.J., Parker (2017) Particle motion and heat transfer in an upward-flowing dense particle suspension: application in solar receivers. Chemical Engineering Science, 177. pp. 313-322. ISSN 0009-2509 (Print), 1873-4405 (Online) (doi:https://doi.org/10.1016/j.ces.2017.11.041)

Dense-phase

Kaur, Baldeep ORCID: 0000-0002-1762-3058, Mittal, Anu, Jana, Soumendu, Mallick, S.S. and Wypych, Peter (2018) Stability and phase space analysis of fluidized-dense phase pneumatic transport system. Powder Technology, 330. pp. 190-200. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2018.02.023)

Kaur, Baldeep ORCID: 0000-0002-1762-3058, Mittal, Anu, Mallick, S.S., Pan, Renhu and Jana, Soumendu (2017) Numerical simulation of fluidized dense-phase pneumatic conveying of powders to develop improved model for solids friction factor. Particuology, 35. pp. 42-50. ISSN 1674-2001 (doi:https://doi.org/10.1016/j.partic.2016.11.006)

Kaur, Baldeep ORCID: 0000-0002-1762-3058, Mittal, Anu, Wypych, Peter, Mallick, S. S. and Jana, Soumendu (2016) On developing improved modelling and scale-up procedures for pneumatic conveying of fine powders. Powder Technology, 305. pp. 270-278. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2016.09.080)

density and concentrations

Design

Gao, Xiaoyu ORCID: 0000-0001-5625-3654, El Souri, Mohammed and Keates, Simeon ORCID: 0000-0002-2826-672X (2017) Advances in Manufacturing Technology XXXI. Advances in Transdisciplinary Engineering, 6 . IOS Press, Amsterdam. ISBN 978-1-61499-791-7

Design for Manufacture

El Souri, Mohammed, Gao, James ORCID: 0000-0001-5625-3654 and Owodunni, Oladele (2017) An analysis of design for manufacturing requirements for managing aerospace manufacturing knowledge. In: Advances in Manufacfturing Technology XXXI, Proceedings of the 15th International Conference on Manufacturing Research, Incorporating the 32nd National Conference on Manufacturing Research, September 5-7, 2017, University of Greenwich, UK. Advances in Transdisciplinary Engineering Series, 6 . IOS Press, pp. 491-496. ISBN 978-1-61499-791-7 ISSN 2352-751X (Print), 2352-7528 (Online) (doi:https://doi.org/10.3233/978-1-61499-792-4-491)

El Souri, Mohammed, Gao, James ORCID: 0000-0001-5625-3654, Owodunni, Oladele, Martin, Nick and Simmonds, Clive (2016) An investigation into the management of design for manufacturing knowledge in an aerospace company. In: Advances in Manufacturing Technology XXX - Proceedings of the 14th International Conference on Manufacturing Research. Advances in Transdisciplinary Engineering . IOS, pp. 401-406. ISBN 978-1-61499-667-5 (doi:https://doi.org/10.3233/978-1-61499-668-2-401)

El Souri, Mohammed, Gao, James ORCID: 0000-0001-5625-3654, Owodunni, Oladele, Simmonds, Clive and Martin, Nick (2018) Improving product design through knowledge management in aerospace manufacturing lifecycle. In: Advances in Manufacfturing Technology XXXII. Advances in Transdisciplinary Engineering, 8 . IOS, pp. 197-202. ISBN 978-1-61499-901-0 ISSN 2352-751X (Print), 2352-7528 (Online) (doi:https://doi.org/10.3233/978-1-61499-902-7-197)

Design for manufacturing

Design Knowledge Management

Baxter, David and Gao, James ORCID: 0000-0001-5625-3654 (2006) Development of a process-based data driven engineering design knowledge re-use system. Computer-Aided Design and Applications, 3 (1-4). pp. 109-117. ISSN 1686-4360 (Online) (doi:https://doi.org/10.1080/16864360.2006.10738447)

design projects

Design Reuse

Digital Customisation

Digital engineering technology

Liu, Changqing, Li, Yingguang and Gao, James ORCID: 0000-0001-5625-3654 (2017) Special issue on digital enterprise technologies (editorial). International Journal of Advanced Manufacturing Technology. pp. 1-2. ISSN 0268-3768 (Print), 1433-3015 (Online) (doi:https://doi.org/10.1007/s00170-017-0595-4)

digital manufacturing

Li, Yingguang, Liu, Changqing and Gao, James ORCID: 0000-0001-5625-3654 (2018) Spcial issue on Digital Enterprise Technologies in Manufacturing. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232 (13). pp. 2251-2252. ISSN 0954-4054 (Print), 2041-2975 (Online) (doi:https://doi.org/10.1177/0954405418774602)

dilation

dimensional tolerance

Zhang, Guangdong, Huang, Xiang, Li, Shuanggao and Deng, Tong ORCID: 0000-0003-4117-4317 (2019) Optimized design method for profile extrusion die based on NURBS modeling. Fibers and Polymers, 20 (8). pp. 1733-1741. ISSN 1229-9197 (Print), 1875-0052 (Online) (doi:https://doi.org/10.1007/s12221-019-1168-y)

Direct compression

Discharge rate

Discrete-event simulation

Wilson, Joel, Arokiam, Alan, Belaidi, Hafid and Ladbrook, John (2016) A simple energy usage toolkit from manufacturing simulation data. Journal of Cleaner Production, 122. pp. 266-276. ISSN 0959-6526 (Print), 1879-1786 (Online) (doi:https://doi.org/10.1016/j.jclepro.2015.11.071)

Disintegration time

Dispersed product development

dissemination of sustainability results

Owodunni, O. O. and Pinder, D. (2016) Sustainability improvement in milling operation through improved tool design and optimized process parameters: An industrial case study. In: Procedia CIRP. Elsevier, pp. 498-503. ISSN 2212-8271 (doi:https://doi.org/10.1016/j.procir.2016.01.115)

dissipative system

DNA sensor

Drawing processes

dust capture

Farnish, Richard, Belaidi, Hafid and Zigan, Stefan (2019) The effects of reverse jet pulse over-pressurisation on dust filter performance. In: ICBMH 2019. University of Newcastle, Australia.

Dust explosions

dust filtration

Farnish, Richard, Beladi, Abdelhafid and Zigan, Stefan (2019) Investigation into the effects of cyclic particle loading onto filter media. In: ICBMH 2019. University of Newcastle, Australia.

Dust generation mechanism

Dustiness

dynamic roughness

e-Health

Sucasas, Victor, Mantas, Georgios, Radwan, Ayman and Rodriguez, Jonathan (2016) An OAuth2-based protocol with strong user privacy preservation for smart city mobile e-Health apps. In: 2016 IEEE International Conference on Communications (ICC). IEEE, pp. 1-6. ISBN 978-1-4799-6665-3 ISSN 1938-1883 (Online) (doi:https://doi.org/10.1109/ICC.2016.7511598)

Electrophysiological model

EMC

Emergent Nations

EMI

Emission

Emissions

empirical model

Employability

Employee Collaboration

Enabling technologies

Gao, J. ORCID: 0000-0001-5625-3654 and Baxter, D. (2007) Enabling technologies and frameworks for new product development: a selection of papers from ICMR2005. International Journal of Production Research, 45 (7). pp. 1485-1487. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:https://doi.org/10.1080/00207540600942201)

encryption

energy conservation

Energy efficiency

energy efficient tool design

Energy modelling

Energy Savings

Energy Sector

Energy Usage

Frystacki, Thomas H., Arokiam, Alan, Belaidi, Abdelhafid and Kirk, Paul L. (2015) Energy usage and temperature distribution in old mega factories. N/A. (Unpublished)

Engineering Education

Ensemble model

Enterprise 2.0

Enterprise integration

Environment

Environmental management

Environmental management systems

Shah, Satya, Naghi Ganji, Elmira and Hasan, Syed (2016) Environmental management systems and sustainability in SMEs. In: 20th International Conference on Circuits, Systems, Communications and Computers (CSCC 2016). Systems, 76 (02006). Matec Web of Conferences, Greece. ISSN 2261-236X (Online) (doi:https://doi.org/10.1051/matecconf/20167602006)

Environmental management systems (EMS)

Environmental practices

Environmental sustainability

erosive wear

euler-euler model

Experiment

Experimental

Experimental test

External clients

Romanova, Anna (2016) Hands-on delivery of group business project. In: SHIFT 2017: Annual Conference of Learning, Teaching & Assessment, Friday 6 January, 2017, Greenwich Maritime Campus, Queen Anne Court. (Submitted)

extraction of hydrocarbons

Michael Bradley (2017) Apparatus comprising a microwave processing chamber. http://www.freepatentsonline.com/y2019/0127645.html.

Extreme learning machine (ELM)

Failure

Fall detection

Fine powders

Finite element analysis (FEA)

Flow function

Garg, Vivek, Mallick, S. S., García-Trinanes, Pablo ORCID: 0000-0002-4993-2250 and Berry, Robert James (2018) An investigation into the flowability of fine powders used in pharmaceutical industries. Powder Technology, 336. pp. 375-382. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2018.06.014)

Flow property testing

Fluidisation

Food Processing

Food supply chain

Shah, Satya, Naghi Ganji, Elmira and Coutroubis, Alec (2017) Lean production practices to enhance organisational performance. In: MATEC Web of Conferences 125: 21st International Conference on Circuits, Systems, Communications and Computers (CSCC 2017). EDP Sciences, pp. 1-7. ISSN 2261-236X (Online) (doi:https://doi.org/10.1051/matecconf/201712502003)

Freeform Surfaces

gas-particle flow

Generalized epilepsy

generative modeling

Le, Chi Hieu ORCID: 0000-0002-5168-2297, Kasmaji, Wisnu Wijaya, Packianather, Michael S., Mengistu, Samuel, Tran, Duc Tang and Chu, Anh My (2017) Customer driven mass-customisation and innovative product development with parametric design & generative modeling. In: Advances in Manufacturing Technology XXXI. Advances in Transdisciplinary Engineering, 6 . IOS Press, London, pp. 415-420. ISBN 978-1614997924 ISSN 2352-751X (Print), 2352-7528 (Online) (doi:https://doi.org/10.3233/978-1-61499-792-4-415)

geopolymers

Global manufacturing

Naghi Ganji, E., Shah, S. and Coutroubis, A. (2018) Sustainable supply and demand chain integration within global manufacturing industries. In: Proceedings of the 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE, pp. 1807-1811. ISBN 978-1-5386-0949-1 ISSN 2157-362X (Online) (doi:https://doi.org/10.1109/IEEM.2017.8290203)

Granular flow

Granular mixing experiments

Simons, T.A.H., Bensmann, S., Zigan, Stefan, Feise, H.J., Zetzener, H. and Kwade, A. (2015) Characterization of granular mixing in a helical ribbon blade blender. Powder Technology, 293. pp. 15-25. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2015.11.041)

Green Energy

Green wall

Green walls

Romanova, Anna and Horoshenkov, Kirill V. (2016) An application of a parametric transducer to measure the acoustical properties of a living green wall. The Journal of the Acoustical Society of America, 140 (4). ISSN 0001-4966 (Print), 1520-8524 (Online) (doi:https://doi.org/10.1121/1.4971053)

Group business project

Romanova, Anna (2018) Personal Belbin types and MBTI preferences combination in group work assuring success. In: SHIFT 2018, Friday 5 January, 2018, Greenwich Maritime Campus, Queen Anne Court.

Romanova, Anna and Coutroubis, Alec D. (2016) 'Pro' and 'hands-on' approach in business project delivery. In: The First Medway Engineering Conference on Systems: Efficiency, Sustainability and Modelling in Chatham, 6 June 2016, Pilkington Building, University of Greenwich, Central Avenue, Chatham, Medway.

group work

Romanova, Anna (2018) Overcoming Liminality in Peer Review. In: Medway Festival of Learning & Teaching, Thursday 13 September, 2018, Medway Campus - Pilkington Building.

Romanova, Anna (2018) Personal Belbin types and MBTI preferences combination in group work assuring success. In: SHIFT 2018, Friday 5 January, 2018, Greenwich Maritime Campus, Queen Anne Court.

GSM (2G)

handling

Hands-on

health benefit

Heat transfer

heat transfer fluid

He’s variational method

High Value Manufacturing

Higher Education

homomorphic MAC

Homomorphic MACs

Esfahani, Alireza, Mantas, Georgios and Rodriguez, Jonathan (2016) An efficient null space-based Homomorphic MAC scheme against tag pollution attacks in RLNC. IEEE Communications Letters, 20 (5). pp. 918-921. ISSN 1089-7798 (doi:https://doi.org/10.1109/LCOMM.2016.2547420)

homomorphic message authentication code

Hopper design

Host-based IDS

HVAC

Frystacki, Thomas H., Arokiam, Alan, Belaidi, Abdelhafid and Kirk, Paul L. (2015) Energy usage and temperature distribution in old mega factories. N/A. (Unpublished)

Hybrid organisations

Shah, Satya, Naghi Ganji, Elmira and Coutroubis, Alexander (2017) Evaluation of sustainable practices within project management methods. In: MATEC Web of Conferences: The 21st International Conference on Circuits, Systems, Communications and Computers (CSCC 2017) (CSCC 2017). EDP Sciences, pp. 1-7. ISSN 2261-236X (Online) (doi:https://doi.org/10.1051/matecconf/201712502002)

hydraulic machinery

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

hydraulic systems

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

hydrogel

ICT

ICT adoption

Messaadia, Mourad, Baudry, David, Louis, Anne, Mahdikhah, Sara, Evans, Richard, Gao, James ORCID: 0000-0001-5625-3654, Paquet, Thierry, Sahnoun, M'hammed and Mazari, Belhacène (2016) PLM adoption in SMEs context. Computer-Aided Design and Applications, 13 (5). pp. 618-627. ISSN 1686-4360 (Online) (doi:https://doi.org/10.1080/16864360.2016.1150706)

IIoT

Impedance

Imperfect preventive maintenance

Le Tham, Phouc, Aghezzaf, El-Houssaine, Khatab, Abdelhakim and Le, Chi Hieu ORCID: 0000-0002-5168-2297 (2017) Integrated production and imperfect preventive maintenance planning: An effective MILP-based Relax-and-Fix/Fix-and-Optimize Method. In: Proceedings of the 6th International Conference on Operations Research and Enterprise Systems (ICORES 2017). SCITEPRESS – Science and Technology Publications, Lda, pp. 483-490. ISBN 978-989-758-218-9 (doi:https://doi.org/10.5220/0006285504830490)

Implants

Packianather, M. S., Le, C. H. ORCID: 0000-0002-5168-2297, Pham, Dinh Trung and Le, Hoai Quoc (2017) Advanced micro and nano manufacturing technologies used in medical domain. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer, Singapore, pp. 637-642. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:https://doi.org/10.1007/978-981-10-4361-1_109)

improved performance

Indomethacin

Industrial IoT

Esfahani, Alireza, Mantas, Georgios, Matischek, Rainer, Saghezchi, Firooz B., Rodriguez, Jonathan, Bicaku, Ani, Maksuti, Silia, Tauber, Markus, Schmittner, Christoph and Bastos, Joaquim (2017) A lightweight authentication mechanism for M2M communications in industrial IoT environment. IEEE Internet of Things. pp. 1-8. ISSN 2327-4662 (doi:https://doi.org/10.1109/JIOT.2017.2737630)

Industries

Bicaku, Ani, Maksuti, Silia, Palkovits-Rauter, Silke, Tauber, Markus, Matischek, Rainer, Schmittner, Christoph, Mantas, Georgios, Thron, Mario and Delsing, Jerker (2017) Towards trustworthy end-to-end communication in industry 4.0. In: 2017 IEEE 15th International Conference on Industrial Informatics (INDIN). IEEE, pp. 889-896. ISBN 978-1538608388 ISSN 2378-363X (Online) (doi:https://doi.org/10.1109/INDIN.2017.8104889)

Industry 4.0

Esfahani, Alireza, Mantas, Georgios, Barcelos, Mariana, Saghezchi, Firooz B., Sucasas, Victor, Bastos, Joaquim and Rodriguez, Jonathan (2018) Security framework for the semiconductor supply chain environment. In: Broadband Communications, Networks, and Systems. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering book series (LNICST) (263). Springer, Cham, Switzerland, pp. 159-168. ISBN 978-303005194-5 ISSN 1867-8211 (doi:https://doi.org/10.1007/978-3-030-05195-2_16)

industry engagement

Information and communication technologies

Gao, Xiaoyu ORCID: 0000-0001-5625-3654 (2018) An overview of manufacturing knowledge sharing in the product development process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232 (13). pp. 2253-2263. ISSN 0954-4054 (Print), 2041-2975 (Online) (doi:https://doi.org/10.1177/0954405418759375)

Information and knowledge management

Information Technology

Shah, Satya and Hasan, Syed (2015) Influence of IT on micro enterprises to pursue strategic growth. In: Recent Advances in Computer Science: Proceedings of the 19th International Conference on Computers (CSCC'15). Recent Advances in Computer Engineering Series, 32 (32). WSEAS, Greece, pp. 488-496. ISBN 978-1-61804-320-7 ISSN 1790-5109

Information technology (IT)

Shah, S., Long, M. and Naghi Ganji, E. (2018) Achieving strategic growth in microenterprises through information technology: UK micro enterprise case study. In: Proceedings of the 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE, pp. 1133-1137. ISBN 978-1-5386-0949-1 ISSN 2157-362X (Online) (doi:https://doi.org/10.1109/IEEM.2017.8290069)

Innovation and disruptive technolgy

Innovation and knowledge management

Innovation Management

Innovative product development

Baxter, David, Gao, James ORCID: 0000-0001-5625-3654 and Li, Yingguang (2011) Innovative product development (Editorial). International Journal of Product Lifecycle Management, 5 (2/3/4). pp. 99-101. ISSN 1743-5110 (Print), 1743-5129 (Online)

Inorganic excipients

Integrated Framework

Integrated strategies

Integration

Intelligent Transportation Systems

Interaction with industry

Internet of Things

Raza, M., Hoa Le, M., Aslam, N., Le, C. Hieu ORCID: 0000-0002-5168-2297, Tam Le, N. and Ly Le, T. (2017) Telehealth technology: Potentials, challenges and research directions for developing countries. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer, Singapore, pp. 523-528. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:https://doi.org/10.1007/978-981-10-4361-1_89)

Internet of things (IoT)

Intrusion Attacks

Intrusion Detection

IoT

ISO method

IT based strategies

Jenike Method

JIT

key management

Esfahani, Alireza, Mantas, Georgios, Silva, Helio, Rodriguez, Jonathan and Neves, Jose Carlos (2016) An efficient MAC-based scheme against pollution attacks in XOR network coding-enabled WBANs for remote patient monitoring systems. EURASIP Journal on Wireless Communications and Networking, 2016 (113). pp. 1-10. ISSN 1687-1472 (Print), 1687-1499 (Online) (doi:https://doi.org/10.1186/s13638-016-0601-9)

Knowledge management

Mountney, S. L., Gao, J. X. ORCID: 0000-0001-5625-3654 and Wiseall, S. (2007) A knowledge system to support manufacturing knowledge during preliminary design. International Journal of Production Research, 45 (7). pp. 1521-1537. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:https://doi.org/10.1080/00207540600942300)

Knowledge management

Essop, Ismael A., Evans, Richard D., Wan, Shan, Giddaluru, Muni P., Gao, James X. ORCID: 0000-0001-5625-3654, Baudry, David, Mahdikhah, Sara and Messaadia, Mourad (2016) Investigation into current industrial practices relating to product lifecycle management in a multi-national manufacturing company. Computer-Aided Design and Applications, 13 (5). pp. 647-661. ISSN 1686-4360 (Online) (doi:https://doi.org/10.1080/16864360.2016.1150711)

Gao, James ORCID: 0000-0001-5625-3654 and Bernard, Alain (2017) An overview of knowledge sharing in new product development. The International Journal of Advanced Manufacturing Technology. pp. 1-6. ISSN 0268-3768 (Print), 1433-3015 (Online) (doi:https://doi.org/10.1007/s00170-017-0140-5)

knowledge management (KM)

Saunders, Timothy (2017) A knowledge management framework to support the automotive systems engineering lifecycle. PhD thesis, University of Greenwich.

Knowledge reuse

Knowledge sharing

Lab on a Chip

laboratories

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

laboratory provision

Large Factory Environment

Frystacki, Thomas H., Arokiam, Alan, Belaidi, Abdelhafid and Kirk, Paul L. (2015) Energy usage and temperature distribution in old mega factories. N/A. (Unpublished)

Laser

Law

Lean organisations

Lean production

Lean-phase

Kotzur, Benjamin A., Bradley, Michael S.A., Berry, Robert J. and Farnish, Richard J. (2016) Breakage characteristics of granulated food products for prediction of attrition during lean-phase pneumatic conveying. International Journal of Food Engineering, 12 (9). ISSN 1556-3758 (Print), 2194-5764 (Online) (doi:https://doi.org/10.1515/ijfe-2016-0045)

Learning

Learning practices

Lessons learned

Life cycle analysis (LCA)

Lightweight authentication

Limestone

Liminal Space

Linear stability analysis

Living Green Wall

Living Green Wall (LGW)

Living plants

Load Alteration

Local model

LTE (4G)

Lung Function Testing

m-Health

M2M

M2M Communications

MAC-based scheme

Machine Learning

Machine tool maintenance

Machine tool maintenance and service

Magnetic Resonance Imaging (MRI)

Maintenance

Malware Detection

Manufacturing

Manufacturing and cost evaluation

Manufacturing Environment

Frystacki, Thomas H., Arokiam, Alan, Belaidi, Abdelhafid and Kirk, Paul L. (2015) Energy usage and temperature distribution in old mega factories. N/A. (Unpublished)

Manufacturing Knowledge

Manufacturing SMEs

Manufacturing system

Manufacturing systems

Manufacturing systems and technology

marine carbonate particles

Mass Customisation

mass-customisation

Medical Device

Medical Device market

Medical Image Processing

Medical instrumentation

Medical technology

Meta-learning

Micro and nano manufacturing

Micro-Blogging

Microenterprises

Microfluidic

mineralization

Mixing

Mixing homogeneity

Mobile

Mobile communication

Mobile handsets

Mobile Intrusion Detection System

Mobile Small Cells

modelling

Modelling Languages

Modelling Tools

Modular architecture

Giddaluru, Muni Prasad, Gao, James X. ORCID: 0000-0001-5625-3654 and Bhatti, Raj (2017) Integrating product knowledge with modular product structures in PLM. In: ICIDM2017: International Conference on Innovative Design and Manufacturing, July 17-19, 2017, Milan, Italy.

Module delivery

Monitoring data

motivation

Romanova, Anna (2018) Overcoming Liminality in Peer Review. In: Medway Festival of Learning & Teaching, Thursday 13 September, 2018, Medway Campus - Pilkington Building.

MTC

Multifunctional excipient

Multilingual

narrative

Romanova, Anna (2018) Overcoming Liminality in Peer Review. In: Medway Festival of Learning & Teaching, Thursday 13 September, 2018, Medway Campus - Pilkington Building.

network coding

Network coding

Network Secure Com-munications

Network Segregation

new caking tester

New product development

New Product Development (NPD)

New product introduction

NFC

NI USRP

noise absorption

Noise reduction

Nonlinear optics

Numerical analysis

NURBS

OAuth 2.0

OAuth2

Older people

Ontology

Aziz, Hayder, Li, Zhengxi and Gao, James ORCID: 0000-0001-5625-3654 (2008) Engineering design knowledge management in de-centralised virtual enterprises. Computer-Aided Design and Applications, 5 (6). pp. 787-800. ISSN 1686-4360 (Online) (doi:https://doi.org/10.3722/cadaps.2008.787-800)

Optical method

Optimization

optimized design method

Organisational performance

Out of autoclave processing

parametric design

Parametric sound

Particle attrition

Particle dynamics

particle size

particle solar receiver

Particle technology

Chakravarty, Somik, Fischer, Marc, García-Triñanes, Pablo ORCID: 0000-0002-4993-2250, Parker, David, Le Bihan, Olivier and Morgeneyer, Martin (2017) Study of the particle motion induced by a vortex shaker. Powder Technology, 322. pp. 54-64. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2017.08.026)

Garcia Trinanes, Pablo ORCID: 0000-0002-4993-2250 (2016) Particle progress. The Chemical Engineer, 906 (7):3. pp. 38-40. ISSN 0302-0797

Particles

peer production

peer review

Romanova, Anna (2018) Overcoming Liminality in Peer Review. In: Medway Festival of Learning & Teaching, Thursday 13 September, 2018, Medway Campus - Pilkington Building.

Peer-to-peer

Performance improvement

Performance measurement

Permeability

Personal Preferences

Romanova, Anna (2018) Personal Belbin types and MBTI preferences combination in group work assuring success. In: SHIFT 2018, Friday 5 January, 2018, Greenwich Maritime Campus, Queen Anne Court.

Personal Types

Romanova, Anna (2018) Personal Belbin types and MBTI preferences combination in group work assuring success. In: SHIFT 2018, Friday 5 January, 2018, Greenwich Maritime Campus, Queen Anne Court.

Pharmaceutical excipients

Phase space and Bistability

Physical activity monitoring

pipe

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

pipe acoustics

Pipe corrosion

Romanova, Anna (2016) Concrete corrosion induced by sulfuric acid. In: Sheffield research seminar, Wednesday, 2 March 2016, University of Sheffield.

pipe flow

plastic caking

PLM

PM2.5 concentration prediction

Pneumatic conveying

pneumatic conveying pipelines

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

pneumatic conveyors

pneumatic machinery

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

pollution attacks

polymer extrusion die

Polymer-matrix composites (PMCs)

Powder fineness

powder flow characterization

Salehi, Hamid, Berry, Robert, Farnish, Richard and Bradley, Mike (2019) A new uniaxial compression tester: development and application. Chemical Engineering Transactions, 74. pp. 463-468. ISSN 2283-9216 (doi:https://doi.org/10.3303/CET1974078)

Powder flow patterns and issues

Powder manufacture

Powder packing

Powder preparation

Powder recycling

powders

Power quality

Pressure drop

Price Integrity

Privacy

privacy-preserving

Process control

Process management

Process monitoring

Process Representation

processing apparatus

Michael Bradley (2017) Apparatus comprising a microwave processing chamber. http://www.freepatentsonline.com/y2019/0127645.html.

Procurement Practices

Product and engineering design

Product data and knowledge management

Product data and lifecycle management

Product design and manufacturing

Product development

Saunders, Timothy (2017) A knowledge management framework to support the automotive systems engineering lifecycle. PhD thesis, University of Greenwich.

Product development and manufacturing

Product lifecycle management

Product maintenance and service

Product service system

Product testing

Product validation and testing

Product-service systems

Production planning

Profile management system

Project Management

Protocols

pseudonym-based signatures

pseudonymity

Pseudonyms

public knowledge

pumping machinery

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

QoE

Sparrow, R. D., Adekunle, A. A., Berry, R. J. and Farnish, R. J. (2016) The affect of two cryptographic constructs on QoS and QoE for unmanned control vehicles. In: 2015 9th International Conference on Next Generation Mobile Applications, Services and Technologies. IEEE, pp. 265-269. ISBN 978-1-4799-8660-6 (doi:https://doi.org/10.1109/NGMAST.2015.46)

QoS

Quality of service

Random linear network coding

raw materials

Real-life learning

reliability

Saunders, Timothy (2017) A knowledge management framework to support the automotive systems engineering lifecycle. PhD thesis, University of Greenwich.

remote patient monitoring

Renewable energy

Residual stress

Respiratory Disease

response surface methodology

reverse jet cleaning

Farnish, Richard, Belaidi, Hafid and Zigan, Stefan (2019) The effects of reverse jet pulse over-pressurisation on dust filter performance. In: ICBMH 2019. University of Newcastle, Australia.

RFID

Ribbon blade blender

Safety

Scale-up validation

Schulze ring shear tester

secure communications

secure network coding

secure XOR network coding

Security

Segregation

Semiconductor Supply Chain

Sensors

Servers

Service sector

Sewer pipes

Romanova, Anna (2016) Concrete corrosion induced by sulfuric acid. In: Sheffield research seminar, Wednesday, 2 March 2016, University of Sheffield.

shear index

Sheet metal processes

shielding effect

signature scheme

Silicon carbide particles

Silo Design

sine wave

Single cell

Small and Medium Enterprises (SME)

Small and medium enterprises (SMEs)

Smart card technology

Smart Cities

Smart City

Smart Grid

Smart Home

SME

SMEs

Social media

Social projects

social survey

Software defined network

software tools

Soil & fertilizers

Solar energy

Solid dispersions

Solids friction

Sound barriers

Spatial solitons

SSL/TLS

stability analysis

statistical analysis

Stent

The University Of Greenwich (2017) STENT WO 2016116748 A1. WO 2016116748 A1.

STEP

Storage

Storage silos

Strategic Growth

Strategic direction

Strategic Growth

Strength

Student companies

Romanova, Anna (2018) Personal Belbin types and MBTI preferences combination in group work assuring success. In: SHIFT 2018, Friday 5 January, 2018, Greenwich Maritime Campus, Queen Anne Court.

student recruitment

Sulfuric acid

Romanova, Anna (2016) Concrete corrosion induced by sulfuric acid. In: Sheffield research seminar, Wednesday, 2 March 2016, University of Sheffield.

Supply chain

Supply chain innovation

Supply chain management

Supply Chain Management (SCM)

Supply chain restructuring

Supply Chain Risk Management

Sustainability

Sustainability performance improvement

Sustainable demand chain management (SDCM)

Sustainable development

Sustainable energies

sustainable machining

Sustainable Manufacturing

Sustainable practices

Sustainable supply chain

Sustainable Supply Chain Management (SSCM)

Sustainable Supply Demand Chain (SSDC)

System integration

Systems engineering (SE)

Saunders, Timothy (2017) A knowledge management framework to support the automotive systems engineering lifecycle. PhD thesis, University of Greenwich.

Tabletability

tag pollution attack

Tag pollution attacks

Technological Innovation

Technology Innovation

Telecommunications

Telecoms Industry

Telehealth

Temperature Distribution

Frystacki, Thomas H., Arokiam, Alan, Belaidi, Abdelhafid and Kirk, Paul L. (2015) Energy usage and temperature distribution in old mega factories. N/A. (Unpublished)

tensile strength

Tensor model

testing

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

Time consolidation

Time Consolidation Flow Function

tissue engineering

Torque

Traffic Classification

tubing & valves

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

Export as	RSS