Skip navigation

Items where Author is "Okereke, Michael"

Items where Author is "Okereke, Michael"

Up a level
Export as [feed] RSS
Group by: Item Type | Uncontrolled Keywords | No Grouping
3D printing attractor biocompatibility boundary condition computational mechanics Constitutive modelling digital light processing element formulation Erosive wear FEM Finite deformation Finite element method finite element modelling future of FEM Geometry High strain rate High strain rates Impact behaviour Impact rates response Implants inkjet coating material models material response mechanical properties Mechanical relaxations Medical product development meshing Meso-mechanical modelling Micromechanical microneedles Microstructures Monte Carlo approach optimisation Orthotics particulate periodic boundary conditions Personalised health care piercing pneumatic conveying Polymer Composites Polypropylene predictive modelling Rate-dependence recurrence plot representative volume element Semicrystalline polymers stereolithography Surgical tools Thermoplastic matrix composite Thermoplastic matrix composites Two-process model virtual domain Virtual Testing Woven textile composites
Number of items: 59.

3D printing

Ghanizadeh Tabriz, Atabak, Viegas, Beatriz, Okereke, Michael ORCID: 0000-0002-2104-012X , Uddin, Md Jasim, Arribas Lopez, Elena, Zand Fard, Nazanin ORCID: 0000-0003-2058-2354 , Ranatunga, Medhavi, Getti, Giulia ORCID: 0000-0003-1402-8496 and Douroumis, Dionysios ORCID: 0000-0002-3782-0091 (2022) Evaluation of 3D printability and biocompatibility of microfluidic resin for fabrication of solid microneedles. Micromachines, 13:1368. pp. 1-16. ISSN 2072-666X (Online) (doi:https://doi.org/10.3390/mi13091368)

Economidou, Sophia, Pissinato Pere, Cristiane, Okereke, Michael ORCID: 0000-0002-2104-012X and Douroumis, Dionysios ORCID: 0000-0002-3782-0091 (2021) Optimisation of design and manufacturing parameters of 3D printed solid microneedles for improved strength, sharpness, and drug delivery. Micromachines, 12 (2). ISSN 2072-666X (doi:https://doi.org/10.3390/mi12020117)

attractor

Alshahed, Osamh Sabri Mohammed Atia, Kaur, Baldeep ORCID: 0000-0002-1762-3058 , Bradley, Michael and Okereke, Michael ORCID: 0000-0002-2104-012X (2023) Experimental and numerical study on gas-solid flow system of plastic pellets using recurrence quantification analysis of pressure sensor measurements. In: UKACM 2023 Conference (UK Association for Computational Mechanics), 19th - 21st April 2023, The University of Warwick, 19-21 April 2023. (Unpublished)

biocompatibility

Ghanizadeh Tabriz, Atabak, Viegas, Beatriz, Okereke, Michael ORCID: 0000-0002-2104-012X , Uddin, Md Jasim, Arribas Lopez, Elena, Zand Fard, Nazanin ORCID: 0000-0003-2058-2354 , Ranatunga, Medhavi, Getti, Giulia ORCID: 0000-0003-1402-8496 and Douroumis, Dionysios ORCID: 0000-0002-3782-0091 (2022) Evaluation of 3D printability and biocompatibility of microfluidic resin for fabrication of solid microneedles. Micromachines, 13:1368. pp. 1-16. ISSN 2072-666X (Online) (doi:https://doi.org/10.3390/mi13091368)

boundary condition

Okereke, Michael ORCID: 0000-0002-2104-012X and Keates, Simeon ORCID: 0000-0002-2826-672X (2018) Computational mechanics and the finite element method. In: Choi, Seung-Bok, Duan, Haibin, Fu, Yili, Guardiola, Carlos and Sun, Jian-Qiao, (eds.) Finite Element Applications: A Practical Guide to the FEM Process. Springer Tracts in Mechanical Engineering . Springer, England, pp. 3-25. ISBN 978-3319671246 (doi:https://doi.org/10.1007/978-3-319-67125-3_1)

computational mechanics

Okereke, Michael ORCID: 0000-0002-2104-012X and Keates, Simeon ORCID: 0000-0002-2826-672X (2018) Computational mechanics and the finite element method. In: Choi, Seung-Bok, Duan, Haibin, Fu, Yili, Guardiola, Carlos and Sun, Jian-Qiao, (eds.) Finite Element Applications: A Practical Guide to the FEM Process. Springer Tracts in Mechanical Engineering . Springer, England, pp. 3-25. ISBN 978-3319671246 (doi:https://doi.org/10.1007/978-3-319-67125-3_1)

Constitutive modelling

Okereke, Michael ORCID: 0000-0002-2104-012X and Akpoyomare, Ambrose I. (2017) A constitutive model for semi-crystalline polymers: A multiple viscoelastic relaxation processes implementation. In: COMPLAS2017: XIV International Conference on Computational Plasticity: Fundamentals and Principles, 5-7 Sept, 2017, Barcelona, Spain. (Unpublished)

digital light processing

Ghanizadeh Tabriz, Atabak, Viegas, Beatriz, Okereke, Michael ORCID: 0000-0002-2104-012X , Uddin, Md Jasim, Arribas Lopez, Elena, Zand Fard, Nazanin ORCID: 0000-0003-2058-2354 , Ranatunga, Medhavi, Getti, Giulia ORCID: 0000-0003-1402-8496 and Douroumis, Dionysios ORCID: 0000-0002-3782-0091 (2022) Evaluation of 3D printability and biocompatibility of microfluidic resin for fabrication of solid microneedles. Micromachines, 13:1368. pp. 1-16. ISSN 2072-666X (Online) (doi:https://doi.org/10.3390/mi13091368)

element formulation

Okereke, Michael ORCID: 0000-0002-2104-012X and Keates, Simeon ORCID: 0000-0002-2826-672X (2018) Computational mechanics and the finite element method. In: Choi, Seung-Bok, Duan, Haibin, Fu, Yili, Guardiola, Carlos and Sun, Jian-Qiao, (eds.) Finite Element Applications: A Practical Guide to the FEM Process. Springer Tracts in Mechanical Engineering . Springer, England, pp. 3-25. ISBN 978-3319671246 (doi:https://doi.org/10.1007/978-3-319-67125-3_1)

Erosive wear

Lakshman, Biju, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A., Okereke, Michael ORCID: 0000-0002-2104-012X and McIlhagger, A. T. (2014) Erosive wear of polymer composite materials and its correlation with high strain rate mechanical properties. In: 2nd International Conference on Abrasive Processes - ICAP 2014 (Programme and Abstract Book). ICAP, Cambridge, United Kingdom, p. 24.

FEM

Okereke, Michael ORCID: 0000-0002-2104-012X and Keates, Simeon ORCID: 0000-0002-2826-672X (2018) Computational mechanics and the finite element method. In: Choi, Seung-Bok, Duan, Haibin, Fu, Yili, Guardiola, Carlos and Sun, Jian-Qiao, (eds.) Finite Element Applications: A Practical Guide to the FEM Process. Springer Tracts in Mechanical Engineering . Springer, England, pp. 3-25. ISBN 978-3319671246 (doi:https://doi.org/10.1007/978-3-319-67125-3_1)

Finite deformation

Okereke, Michael ORCID: 0000-0002-2104-012X , Buckley, C. Paul and Akpoyomare, Ambrose I. (2017) The mechanism of rate-dependent off-axis compression of a low fibre volume fraction thermoplastic matrix composite. Composite Structures, 168. pp. 685-697. ISSN 0263-8223 (doi:https://doi.org/10.1016/j.compstruct.2017.02.070)

Finite element method

Okereke, Michael ORCID: 0000-0002-2104-012X , Buckleyb, C.P and Le, Chi ORCID: 0000-0002-5168-2297 (2010) Micromechanical modelling of finite deformation of thermoplastic matrix composites. In: Solid Mechanics and Materials Engineering Group seminar, 14 June 2010, Oxford, UK.

finite element modelling

Okereke, Michael ORCID: 0000-0002-2104-012X and Keates, Simeon ORCID: 0000-0002-2826-672X (2018) Computational mechanics and the finite element method. In: Choi, Seung-Bok, Duan, Haibin, Fu, Yili, Guardiola, Carlos and Sun, Jian-Qiao, (eds.) Finite Element Applications: A Practical Guide to the FEM Process. Springer Tracts in Mechanical Engineering . Springer, England, pp. 3-25. ISBN 978-3319671246 (doi:https://doi.org/10.1007/978-3-319-67125-3_1)

future of FEM

Okereke, Michael ORCID: 0000-0002-2104-012X and Keates, Simeon ORCID: 0000-0002-2826-672X (2018) Computational mechanics and the finite element method. In: Choi, Seung-Bok, Duan, Haibin, Fu, Yili, Guardiola, Carlos and Sun, Jian-Qiao, (eds.) Finite Element Applications: A Practical Guide to the FEM Process. Springer Tracts in Mechanical Engineering . Springer, England, pp. 3-25. ISBN 978-3319671246 (doi:https://doi.org/10.1007/978-3-319-67125-3_1)

Geometry

Akpoyomare, Ambrose I., Okereke, Michael ORCID: 0000-0002-2104-012X , Bingley, Mark, McIlhagger, A. T. and Archer, E. (2015) Virtual geometric realization of woven textile composites. In: Proceedings of 20th International Conference on Composite Materials. ICCM, Copenhagen, Denmark.

High strain rate

Lakshman, Biju, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A., Okereke, Michael ORCID: 0000-0002-2104-012X and McIlhagger, A. T. (2014) Erosive wear of polymer composite materials and its correlation with high strain rate mechanical properties. In: 2nd International Conference on Abrasive Processes - ICAP 2014 (Programme and Abstract Book). ICAP, Cambridge, United Kingdom, p. 24.

High strain rates

Okereke, Michael ORCID: 0000-0002-2104-012X , Buckley, C. Paul and Akpoyomare, Ambrose I. (2017) The mechanism of rate-dependent off-axis compression of a low fibre volume fraction thermoplastic matrix composite. Composite Structures, 168. pp. 685-697. ISSN 0263-8223 (doi:https://doi.org/10.1016/j.compstruct.2017.02.070)

Impact behaviour

Okereke, Michael ORCID: 0000-0002-2104-012X , Buckley, C. Paul and Akpoyomare, Ambrose I. (2017) The mechanism of rate-dependent off-axis compression of a low fibre volume fraction thermoplastic matrix composite. Composite Structures, 168. pp. 685-697. ISSN 0263-8223 (doi:https://doi.org/10.1016/j.compstruct.2017.02.070)

Impact rates response

Okereke, Michael ORCID: 0000-0002-2104-012X , Le, Chi ORCID: 0000-0002-5168-2297 and Buckley, C.P (2012) A new constitutive model for prediction of impact rates response of polypropylene. EPJ Web of Conferences, 26:04031. ISSN 2100-014X (doi:https://doi.org/10.1051/epjconf/20122604031)

Implants

Le, Chi ORCID: 0000-0002-5168-2297 , Okereke, Michael ORCID: 0000-0002-2104-012X , Nguyen, Vu Hieu, Dao, Viet Dzung, Soe, Shwe, Zlatov, Nikolay and Le, Tan Hung (2011) Personalised medical product development: Methods, challenges and opportunities. In: Proceedings of International Conference On Innovations, Recent Trends And Challenges In Mechatronics, Mechanical Engineering And New High-Tech Products Development – MECAHITECH’11, vol. 3, year: 2011. INCDMTM, pp. 140-149.

inkjet coating

Economidou, Sophia, Pissinato Pere, Cristiane, Okereke, Michael ORCID: 0000-0002-2104-012X and Douroumis, Dionysios ORCID: 0000-0002-3782-0091 (2021) Optimisation of design and manufacturing parameters of 3D printed solid microneedles for improved strength, sharpness, and drug delivery. Micromachines, 12 (2). ISSN 2072-666X (doi:https://doi.org/10.3390/mi12020117)

material models

Okereke, Michael ORCID: 0000-0002-2104-012X and Keates, Simeon ORCID: 0000-0002-2826-672X (2018) Computational mechanics and the finite element method. In: Choi, Seung-Bok, Duan, Haibin, Fu, Yili, Guardiola, Carlos and Sun, Jian-Qiao, (eds.) Finite Element Applications: A Practical Guide to the FEM Process. Springer Tracts in Mechanical Engineering . Springer, England, pp. 3-25. ISBN 978-3319671246 (doi:https://doi.org/10.1007/978-3-319-67125-3_1)

material response

Okereke, Michael ORCID: 0000-0002-2104-012X and Keates, Simeon ORCID: 0000-0002-2826-672X (2018) Computational mechanics and the finite element method. In: Choi, Seung-Bok, Duan, Haibin, Fu, Yili, Guardiola, Carlos and Sun, Jian-Qiao, (eds.) Finite Element Applications: A Practical Guide to the FEM Process. Springer Tracts in Mechanical Engineering . Springer, England, pp. 3-25. ISBN 978-3319671246 (doi:https://doi.org/10.1007/978-3-319-67125-3_1)

mechanical properties

Ghanizadeh Tabriz, Atabak, Viegas, Beatriz, Okereke, Michael ORCID: 0000-0002-2104-012X , Uddin, Md Jasim, Arribas Lopez, Elena, Zand Fard, Nazanin ORCID: 0000-0003-2058-2354 , Ranatunga, Medhavi, Getti, Giulia ORCID: 0000-0003-1402-8496 and Douroumis, Dionysios ORCID: 0000-0002-3782-0091 (2022) Evaluation of 3D printability and biocompatibility of microfluidic resin for fabrication of solid microneedles. Micromachines, 13:1368. pp. 1-16. ISSN 2072-666X (Online) (doi:https://doi.org/10.3390/mi13091368)

Lakshman, Biju, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A., Okereke, Michael ORCID: 0000-0002-2104-012X and McIlhagger, A. T. (2014) Erosive wear of polymer composite materials and its correlation with high strain rate mechanical properties. In: 2nd International Conference on Abrasive Processes - ICAP 2014 (Programme and Abstract Book). ICAP, Cambridge, United Kingdom, p. 24.

Mechanical relaxations

Okereke, Michael ORCID: 0000-0002-2104-012X and Akpoyomare, Ambrose I. (2017) A constitutive model for semi-crystalline polymers: A multiple viscoelastic relaxation processes implementation. In: COMPLAS2017: XIV International Conference on Computational Plasticity: Fundamentals and Principles, 5-7 Sept, 2017, Barcelona, Spain. (Unpublished)

Medical product development

Le, Chi ORCID: 0000-0002-5168-2297 , Okereke, Michael ORCID: 0000-0002-2104-012X , Nguyen, Vu Hieu, Dao, Viet Dzung, Soe, Shwe, Zlatov, Nikolay and Le, Tan Hung (2011) Personalised medical product development: Methods, challenges and opportunities. In: Proceedings of International Conference On Innovations, Recent Trends And Challenges In Mechatronics, Mechanical Engineering And New High-Tech Products Development – MECAHITECH’11, vol. 3, year: 2011. INCDMTM, pp. 140-149.

meshing

Okereke, Michael ORCID: 0000-0002-2104-012X and Keates, Simeon ORCID: 0000-0002-2826-672X (2018) Computational mechanics and the finite element method. In: Choi, Seung-Bok, Duan, Haibin, Fu, Yili, Guardiola, Carlos and Sun, Jian-Qiao, (eds.) Finite Element Applications: A Practical Guide to the FEM Process. Springer Tracts in Mechanical Engineering . Springer, England, pp. 3-25. ISBN 978-3319671246 (doi:https://doi.org/10.1007/978-3-319-67125-3_1)

Meso-mechanical modelling

Akpoyomare, Ambrose I., Okereke, Michael ORCID: 0000-0002-2104-012X , Bingley, Mark, McIlhagger, A. T. and Archer, E. (2015) Virtual geometric realization of woven textile composites. In: Proceedings of 20th International Conference on Composite Materials. ICCM, Copenhagen, Denmark.

Micromechanical

Okereke, Michael ORCID: 0000-0002-2104-012X , Buckleyb, C.P and Le, Chi ORCID: 0000-0002-5168-2297 (2010) Micromechanical modelling of finite deformation of thermoplastic matrix composites. In: Solid Mechanics and Materials Engineering Group seminar, 14 June 2010, Oxford, UK.

microneedles

Ghanizadeh Tabriz, Atabak, Viegas, Beatriz, Okereke, Michael ORCID: 0000-0002-2104-012X , Uddin, Md Jasim, Arribas Lopez, Elena, Zand Fard, Nazanin ORCID: 0000-0003-2058-2354 , Ranatunga, Medhavi, Getti, Giulia ORCID: 0000-0003-1402-8496 and Douroumis, Dionysios ORCID: 0000-0002-3782-0091 (2022) Evaluation of 3D printability and biocompatibility of microfluidic resin for fabrication of solid microneedles. Micromachines, 13:1368. pp. 1-16. ISSN 2072-666X (Online) (doi:https://doi.org/10.3390/mi13091368)

Economidou, Sophia, Pissinato Pere, Cristiane, Okereke, Michael ORCID: 0000-0002-2104-012X and Douroumis, Dionysios ORCID: 0000-0002-3782-0091 (2021) Optimisation of design and manufacturing parameters of 3D printed solid microneedles for improved strength, sharpness, and drug delivery. Micromachines, 12 (2). ISSN 2072-666X (doi:https://doi.org/10.3390/mi12020117)

Microstructures

Lakshman, Biju, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A., Okereke, Michael ORCID: 0000-0002-2104-012X and McIlhagger, A. T. (2014) Erosive wear of polymer composite materials and its correlation with high strain rate mechanical properties. In: 2nd International Conference on Abrasive Processes - ICAP 2014 (Programme and Abstract Book). ICAP, Cambridge, United Kingdom, p. 24.

Monte Carlo approach

Okereke, Michael ORCID: 0000-0002-2104-012X and Akpoyomare, Ambrose I. (2015) Virtual Testing Architecture for Prediction of Effective Properties of Particulate Composites. In: International Conference on Advances in Composite Materials and Structures. ICACMS, Istanbul Turkey, p. 4.

optimisation

Economidou, Sophia, Pissinato Pere, Cristiane, Okereke, Michael ORCID: 0000-0002-2104-012X and Douroumis, Dionysios ORCID: 0000-0002-3782-0091 (2021) Optimisation of design and manufacturing parameters of 3D printed solid microneedles for improved strength, sharpness, and drug delivery. Micromachines, 12 (2). ISSN 2072-666X (doi:https://doi.org/10.3390/mi12020117)

Orthotics

Le, Chi ORCID: 0000-0002-5168-2297 , Okereke, Michael ORCID: 0000-0002-2104-012X , Nguyen, Vu Hieu, Dao, Viet Dzung, Soe, Shwe, Zlatov, Nikolay and Le, Tan Hung (2011) Personalised medical product development: Methods, challenges and opportunities. In: Proceedings of International Conference On Innovations, Recent Trends And Challenges In Mechatronics, Mechanical Engineering And New High-Tech Products Development – MECAHITECH’11, vol. 3, year: 2011. INCDMTM, pp. 140-149.

particulate

Okereke, Michael ORCID: 0000-0002-2104-012X and Akpoyomare, Ambrose I. (2015) Virtual Testing Architecture for Prediction of Effective Properties of Particulate Composites. In: International Conference on Advances in Composite Materials and Structures. ICACMS, Istanbul Turkey, p. 4.

periodic boundary conditions

Okereke, Michael ORCID: 0000-0002-2104-012X and Akpoyomare, Ambrose I. (2015) Virtual Testing Architecture for Prediction of Effective Properties of Particulate Composites. In: International Conference on Advances in Composite Materials and Structures. ICACMS, Istanbul Turkey, p. 4.

Personalised health care

Le, Chi ORCID: 0000-0002-5168-2297 , Okereke, Michael ORCID: 0000-0002-2104-012X , Nguyen, Vu Hieu, Dao, Viet Dzung, Soe, Shwe, Zlatov, Nikolay and Le, Tan Hung (2011) Personalised medical product development: Methods, challenges and opportunities. In: Proceedings of International Conference On Innovations, Recent Trends And Challenges In Mechatronics, Mechanical Engineering And New High-Tech Products Development – MECAHITECH’11, vol. 3, year: 2011. INCDMTM, pp. 140-149.

piercing

Ghanizadeh Tabriz, Atabak, Viegas, Beatriz, Okereke, Michael ORCID: 0000-0002-2104-012X , Uddin, Md Jasim, Arribas Lopez, Elena, Zand Fard, Nazanin ORCID: 0000-0003-2058-2354 , Ranatunga, Medhavi, Getti, Giulia ORCID: 0000-0003-1402-8496 and Douroumis, Dionysios ORCID: 0000-0002-3782-0091 (2022) Evaluation of 3D printability and biocompatibility of microfluidic resin for fabrication of solid microneedles. Micromachines, 13:1368. pp. 1-16. ISSN 2072-666X (Online) (doi:https://doi.org/10.3390/mi13091368)

pneumatic conveying

Alshahed, Osamh Sabri Mohammed Atia, Kaur, Baldeep ORCID: 0000-0002-1762-3058 , Bradley, Michael and Okereke, Michael ORCID: 0000-0002-2104-012X (2023) Experimental and numerical study on gas-solid flow system of plastic pellets using recurrence quantification analysis of pressure sensor measurements. In: UKACM 2023 Conference (UK Association for Computational Mechanics), 19th - 21st April 2023, The University of Warwick, 19-21 April 2023. (Unpublished)

Polymer Composites

Lakshman, Biju, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A., Okereke, Michael ORCID: 0000-0002-2104-012X and McIlhagger, A. T. (2014) Erosive wear of polymer composite materials and its correlation with high strain rate mechanical properties. In: 2nd International Conference on Abrasive Processes - ICAP 2014 (Programme and Abstract Book). ICAP, Cambridge, United Kingdom, p. 24.

Polypropylene

Okereke, Michael ORCID: 0000-0002-2104-012X and Akpoyomare, Ambrose I. (2017) A constitutive model for semi-crystalline polymers: A multiple viscoelastic relaxation processes implementation. In: COMPLAS2017: XIV International Conference on Computational Plasticity: Fundamentals and Principles, 5-7 Sept, 2017, Barcelona, Spain. (Unpublished)

Okereke, Michael ORCID: 0000-0002-2104-012X , Le, Chi ORCID: 0000-0002-5168-2297 and Buckley, C.P (2012) A new constitutive model for prediction of impact rates response of polypropylene. EPJ Web of Conferences, 26:04031. ISSN 2100-014X (doi:https://doi.org/10.1051/epjconf/20122604031)

predictive modelling

Okereke, Michael ORCID: 0000-0002-2104-012X and Akpoyomare, Ambrose I. (2015) Virtual Testing Architecture for Prediction of Effective Properties of Particulate Composites. In: International Conference on Advances in Composite Materials and Structures. ICACMS, Istanbul Turkey, p. 4.

Rate-dependence

Okereke, Michael ORCID: 0000-0002-2104-012X , Buckley, C. Paul and Akpoyomare, Ambrose I. (2017) The mechanism of rate-dependent off-axis compression of a low fibre volume fraction thermoplastic matrix composite. Composite Structures, 168. pp. 685-697. ISSN 0263-8223 (doi:https://doi.org/10.1016/j.compstruct.2017.02.070)

recurrence plot

Alshahed, Osamh Sabri Mohammed Atia, Kaur, Baldeep ORCID: 0000-0002-1762-3058 , Bradley, Michael and Okereke, Michael ORCID: 0000-0002-2104-012X (2023) Experimental and numerical study on gas-solid flow system of plastic pellets using recurrence quantification analysis of pressure sensor measurements. In: UKACM 2023 Conference (UK Association for Computational Mechanics), 19th - 21st April 2023, The University of Warwick, 19-21 April 2023. (Unpublished)

representative volume element

Okereke, Michael ORCID: 0000-0002-2104-012X and Akpoyomare, Ambrose I. (2015) Virtual Testing Architecture for Prediction of Effective Properties of Particulate Composites. In: International Conference on Advances in Composite Materials and Structures. ICACMS, Istanbul Turkey, p. 4.

Semicrystalline polymers

Okereke, Michael ORCID: 0000-0002-2104-012X and Akpoyomare, Ambrose I. (2017) A constitutive model for semi-crystalline polymers: A multiple viscoelastic relaxation processes implementation. In: COMPLAS2017: XIV International Conference on Computational Plasticity: Fundamentals and Principles, 5-7 Sept, 2017, Barcelona, Spain. (Unpublished)

stereolithography

Economidou, Sophia, Pissinato Pere, Cristiane, Okereke, Michael ORCID: 0000-0002-2104-012X and Douroumis, Dionysios ORCID: 0000-0002-3782-0091 (2021) Optimisation of design and manufacturing parameters of 3D printed solid microneedles for improved strength, sharpness, and drug delivery. Micromachines, 12 (2). ISSN 2072-666X (doi:https://doi.org/10.3390/mi12020117)

Surgical tools

Le, Chi ORCID: 0000-0002-5168-2297 , Okereke, Michael ORCID: 0000-0002-2104-012X , Nguyen, Vu Hieu, Dao, Viet Dzung, Soe, Shwe, Zlatov, Nikolay and Le, Tan Hung (2011) Personalised medical product development: Methods, challenges and opportunities. In: Proceedings of International Conference On Innovations, Recent Trends And Challenges In Mechatronics, Mechanical Engineering And New High-Tech Products Development – MECAHITECH’11, vol. 3, year: 2011. INCDMTM, pp. 140-149.

Thermoplastic matrix composite

Okereke, Michael ORCID: 0000-0002-2104-012X , Buckleyb, C.P and Le, Chi ORCID: 0000-0002-5168-2297 (2010) Micromechanical modelling of finite deformation of thermoplastic matrix composites. In: Solid Mechanics and Materials Engineering Group seminar, 14 June 2010, Oxford, UK.

Thermoplastic matrix composites

Okereke, Michael ORCID: 0000-0002-2104-012X , Buckley, C. Paul and Akpoyomare, Ambrose I. (2017) The mechanism of rate-dependent off-axis compression of a low fibre volume fraction thermoplastic matrix composite. Composite Structures, 168. pp. 685-697. ISSN 0263-8223 (doi:https://doi.org/10.1016/j.compstruct.2017.02.070)

Two-process model

Okereke, Michael ORCID: 0000-0002-2104-012X and Akpoyomare, Ambrose I. (2017) A constitutive model for semi-crystalline polymers: A multiple viscoelastic relaxation processes implementation. In: COMPLAS2017: XIV International Conference on Computational Plasticity: Fundamentals and Principles, 5-7 Sept, 2017, Barcelona, Spain. (Unpublished)

virtual domain

Okereke, Michael ORCID: 0000-0002-2104-012X and Keates, Simeon ORCID: 0000-0002-2826-672X (2018) Computational mechanics and the finite element method. In: Choi, Seung-Bok, Duan, Haibin, Fu, Yili, Guardiola, Carlos and Sun, Jian-Qiao, (eds.) Finite Element Applications: A Practical Guide to the FEM Process. Springer Tracts in Mechanical Engineering . Springer, England, pp. 3-25. ISBN 978-3319671246 (doi:https://doi.org/10.1007/978-3-319-67125-3_1)

Virtual Testing

Akpoyomare, Ambrose I., Okereke, Michael ORCID: 0000-0002-2104-012X , Bingley, Mark, McIlhagger, A. T. and Archer, E. (2015) Virtual geometric realization of woven textile composites. In: Proceedings of 20th International Conference on Composite Materials. ICCM, Copenhagen, Denmark.

Okereke, Michael ORCID: 0000-0002-2104-012X and Akpoyomare, Ambrose I. (2015) Virtual Testing Architecture for Prediction of Effective Properties of Particulate Composites. In: International Conference on Advances in Composite Materials and Structures. ICACMS, Istanbul Turkey, p. 4.

Woven textile composites

Akpoyomare, Ambrose I., Okereke, Michael ORCID: 0000-0002-2104-012X , Bingley, Mark, McIlhagger, A. T. and Archer, E. (2015) Virtual geometric realization of woven textile composites. In: Proceedings of 20th International Conference on Composite Materials. ICCM, Copenhagen, Denmark.

This list was generated on Thu Nov 21 20:21:33 2024 UTC.