Skip navigation

Items where Author is "Farnish, R.J."

Items where Author is "Farnish, R.J."

Up a level
Export as [feed] RSS
Group by: Item Type | Uncontrolled Keywords | No Grouping
adhesion adhesion strength Aerated discharge Air Effect air effect segregation Air injection air velocity binary mixtures bio-powder bulk materials Bulk solids centrifugal force changing world chemical industry computational methods continuous operation core flow cost effectiveness crisp coating dense phase conveying discharge (fluid mechanics) dosator draw in energy utilization Equipment testing experimental procedure Experimental test feedback control feeding filling flavoring powder flow pattern flow patterns flow rate food powders free flowing gas pressures hoppers hydrated lime Industrial activities Industrial applications interparticle force iron alloy powder iron alloys Iron powder latency local environments mass transfer materials and process Materials handling materials handling equipment materials testing Measurements of Mechanical properties metal powder quality metal powders segregation narrow size distributions Optimisations particle adhesion particle densities particle size particle size analysis particles particles (particulate matter) particulate materials particulate matter Permeability pipelines pneumatic conveying pipelines pneumatic conveyors powder flow Powder metallurgy Powder metals powders power consumption pressure drop probes production control quality control representative sample rolling rolling segregation security Segregation (metallography) segregation effects Segregation potential segregation process sensitivity Sintered products size distribution small particle size smooth wall solid-solid separation storage storage (materials) storage vessel surface segregation tankers (ships) technology Test apparatus Test equipments test facilities thieving probes throughput time dependent properties University of Greenwich unmanned aerial vehicles velocity vessel design vibration control volumetric efficiency wall flow wireless Wolfson (CO)
Number of items: 130.

adhesion

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2009) Direct measurement of powder flavor adhesion onto crisp surface using a novel adhesion tester. Particulate Science and Technology, 27 (4). pp. 362-372. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:https://doi.org/10.1080/02726350902994035)

adhesion strength

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2011) Centrifugal tester versus a novel design to measure particle adhesion strength and investigation of effect of physical characteristics (size, shape, density) of food particles on food surfaces. Journal of Food Engineering, 104 (4). pp. 518-524. ISSN 0260-8774 (doi:https://doi.org/10.1016/j.jfoodeng.2011.01.008)

Aerated discharge

Bianchini, A., Farnish, R.J., Gambuti, M. and Saccani, C. (2016) Predictive model for corn flour discharge rates through an aerated hopper. Powder Technology, 298. pp. 84-89. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2016.05.009)

Air Effect

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2010) Testing of powders for sensitivity to air effect segregation. In: Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Florence, pp. 53-60. ISBN 978-189907219-4

air effect segregation

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2011) Testing of powders for sensitivity to air effect segregation. Powder Metallurgy, 54 (4). pp. 468-470. ISSN 0032-5899 (Print), 1743-2901 (Online) (doi:https://doi.org/10.1179/174329011X13073642060730)

Air injection

Bianchini, A., Farnish, R.J., Gambuti, M. and Saccani, C. (2016) Predictive model for corn flour discharge rates through an aerated hopper. Powder Technology, 298. pp. 84-89. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2016.05.009)

air velocity

Deng, T. ORCID: 0000-0003-4117-4317 , Farnish, R.J. and Bradley, M.S.A. (2007) Pressure drop in dense phase conveying. Bulk Solids Handling, 27 (5). pp. 296-301. ISSN 0173-9980

binary mixtures

Salter, G.F., Farnish, R.J., Bradley, M.S.A. and Burnett, A.J. (2000) Segregation of binary mixtures of particles during the filling of a two-dimensional representation of a hopper. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 214 (3). pp. 197-208. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:https://doi.org/10.1243/0954408001530056)

bio-powder

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2009) Direct measurement of powder flavor adhesion onto crisp surface using a novel adhesion tester. Particulate Science and Technology, 27 (4). pp. 362-372. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:https://doi.org/10.1080/02726350902994035)

bulk materials

Farnish, R.J. (2003) Feeding of the 5,000 (-ton silo). Powder and Bulk Engineering, 17 (5). p. 10. ISSN 0897-6627

Bulk solids

Bianchini, A., Farnish, R.J., Gambuti, M. and Saccani, C. (2016) Predictive model for corn flour discharge rates through an aerated hopper. Powder Technology, 298. pp. 84-89. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2016.05.009)

Farnish, R.J., Berry, R. and Bradley, M. (2008) Development of a novel - filling technique loading bulk particulate materials into tankers or processes. Bulk Solids Handling, 28 (4). pp. 238-241. ISSN 0173-9980

centrifugal force

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2011) Centrifugal tester versus a novel design to measure particle adhesion strength and investigation of effect of physical characteristics (size, shape, density) of food particles on food surfaces. Journal of Food Engineering, 104 (4). pp. 518-524. ISSN 0260-8774 (doi:https://doi.org/10.1016/j.jfoodeng.2011.01.008)

changing world

Farnish, R.J. (2007) A changing world demands realistic expectations. Powder and Bulk Engineering, 21 (6). p. 8. ISSN 0897-6627

chemical industry

Farnish, R.J., Berry, R. and Bradley, M. (2008) Development of a novel - filling technique loading bulk particulate materials into tankers or processes. Bulk Solids Handling, 28 (4). pp. 238-241. ISSN 0173-9980

computational methods

Farnish, R.J. (1997) Power consumption and profit margins - less is more. Powder Handling and Processing, 9 (4). pp. 355-357. ISSN 0934-7348

continuous operation

Farnish, R.J. (2004) Choosing the right storage vessel for your continuous operation. Powder and Bulk Engineering, 18 (11). pp. 33-37. ISSN 0897-6627

core flow

Farnish, R.J., Berry, R. and Bradley, M. (2008) Development of a novel - filling technique loading bulk particulate materials into tankers or processes. Bulk Solids Handling, 28 (4). pp. 238-241. ISSN 0173-9980

cost effectiveness

Farnish, R.J. (1997) Power consumption and profit margins - less is more. Powder Handling and Processing, 9 (4). pp. 355-357. ISSN 0934-7348

crisp coating

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2009) Direct measurement of powder flavor adhesion onto crisp surface using a novel adhesion tester. Particulate Science and Technology, 27 (4). pp. 362-372. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:https://doi.org/10.1080/02726350902994035)

dense phase conveying

Deng, T. ORCID: 0000-0003-4117-4317 , Farnish, R.J. and Bradley, M.S.A. (2007) Pressure drop in dense phase conveying. Bulk Solids Handling, 27 (5). pp. 296-301. ISSN 0173-9980

discharge (fluid mechanics)

Farnish, R.J. (2004) Choosing the right storage vessel for your continuous operation. Powder and Bulk Engineering, 18 (11). pp. 33-37. ISSN 0897-6627

dosator

Angulo Pinzon, O.A., Berry, R.J., Bradley, M.S., Farnish, R.J. and Antonijevic, M.D. ORCID: 0000-0002-5847-7886 (2009) The impact of powder flowing properties on dosator filling system operation. In: 2009 AAPS Annual Meeting and Exposition, 8-12 Nov 2009, Los Angeles, USA.

draw in

Farnish, R.J., Berry, R. and Bradley, M. (2008) Development of a novel - filling technique loading bulk particulate materials into tankers or processes. Bulk Solids Handling, 28 (4). pp. 238-241. ISSN 0173-9980

energy utilization

Farnish, R.J. (1997) Power consumption and profit margins - less is more. Powder Handling and Processing, 9 (4). pp. 355-357. ISSN 0934-7348

Equipment testing

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2010) Testing of powders for sensitivity to air effect segregation. In: Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Florence, pp. 53-60. ISBN 978-189907219-4

experimental procedure

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2005) Segregation of metal powders. In: Euro PM 2005: Powder Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA), Prague, Czech Republic, pp. 61-66. ISBN 9781899072187

Experimental test

Bianchini, A., Farnish, R.J., Gambuti, M. and Saccani, C. (2016) Predictive model for corn flour discharge rates through an aerated hopper. Powder Technology, 298. pp. 84-89. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2016.05.009)

feedback control

Salter, G.F., Farnish, R.J., Bradley, M.S.A. and Burnett, A.J. (2000) Segregation of binary mixtures of particles during the filling of a two-dimensional representation of a hopper. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 214 (3). pp. 197-208. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:https://doi.org/10.1243/0954408001530056)

feeding

Salter, G.F., Farnish, R.J., Bradley, M.S.A. and Burnett, A.J. (2000) Segregation of binary mixtures of particles during the filling of a two-dimensional representation of a hopper. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 214 (3). pp. 197-208. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:https://doi.org/10.1243/0954408001530056)

filling

Salter, G.F., Farnish, R.J., Bradley, M.S.A. and Burnett, A.J. (2000) Segregation of binary mixtures of particles during the filling of a two-dimensional representation of a hopper. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 214 (3). pp. 197-208. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:https://doi.org/10.1243/0954408001530056)

flavoring powder

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2009) Direct measurement of powder flavor adhesion onto crisp surface using a novel adhesion tester. Particulate Science and Technology, 27 (4). pp. 362-372. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:https://doi.org/10.1080/02726350902994035)

flow pattern

Salter, G.F., Farnish, R.J., Bradley, M.S.A. and Burnett, A.J. (2000) Segregation of binary mixtures of particles during the filling of a two-dimensional representation of a hopper. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 214 (3). pp. 197-208. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:https://doi.org/10.1243/0954408001530056)

flow patterns

Farnish, R.J. (2004) Choosing the right storage vessel for your continuous operation. Powder and Bulk Engineering, 18 (11). pp. 33-37. ISSN 0897-6627

flow rate

Deng, T. ORCID: 0000-0003-4117-4317 , Farnish, R.J. and Bradley, M.S.A. (2007) Pressure drop in dense phase conveying. Bulk Solids Handling, 27 (5). pp. 296-301. ISSN 0173-9980

food powders

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2011) Centrifugal tester versus a novel design to measure particle adhesion strength and investigation of effect of physical characteristics (size, shape, density) of food particles on food surfaces. Journal of Food Engineering, 104 (4). pp. 518-524. ISSN 0260-8774 (doi:https://doi.org/10.1016/j.jfoodeng.2011.01.008)

free flowing

Farnish, R.J., Berry, R. and Bradley, M. (2008) Development of a novel - filling technique loading bulk particulate materials into tankers or processes. Bulk Solids Handling, 28 (4). pp. 238-241. ISSN 0173-9980

gas pressures

Farnish, R.J., Berry, R. and Bradley, M. (2008) Development of a novel - filling technique loading bulk particulate materials into tankers or processes. Bulk Solids Handling, 28 (4). pp. 238-241. ISSN 0173-9980

hoppers

Farnish, R.J. (2004) Choosing the right storage vessel for your continuous operation. Powder and Bulk Engineering, 18 (11). pp. 33-37. ISSN 0897-6627

hydrated lime

Deng, T. ORCID: 0000-0003-4117-4317 , Farnish, R.J. and Bradley, M.S.A. (2007) Pressure drop in dense phase conveying. Bulk Solids Handling, 27 (5). pp. 296-301. ISSN 0173-9980

Industrial activities

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2010) Testing of powders for sensitivity to air effect segregation. In: Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Florence, pp. 53-60. ISBN 978-189907219-4

Industrial applications

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2010) Testing of powders for sensitivity to air effect segregation. In: Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Florence, pp. 53-60. ISBN 978-189907219-4

Deng, T. ORCID: 0000-0003-4117-4317 , Farnish, R.J. and Bradley, M.S.A. (2007) Pressure drop in dense phase conveying. Bulk Solids Handling, 27 (5). pp. 296-301. ISSN 0173-9980

interparticle force

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2005) Segregation of metal powders. In: Euro PM 2005: Powder Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA), Prague, Czech Republic, pp. 61-66. ISBN 9781899072187

iron alloy powder

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2006) Predicting segregation of metal powders. Powder Metallurgy, 49 (3). pp. 206-208. ISSN 0032-5899 (Print), 1743-2901 (Online) (doi:https://doi.org/10.1179/174329006X152442)

iron alloys

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2006) Predicting segregation of metal powders. Powder Metallurgy, 49 (3). pp. 206-208. ISSN 0032-5899 (Print), 1743-2901 (Online) (doi:https://doi.org/10.1179/174329006X152442)

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2005) Segregation of metal powders. In: Euro PM 2005: Powder Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA), Prague, Czech Republic, pp. 61-66. ISBN 9781899072187

Iron powder

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2006) Predicting segregation of metal powders. Powder Metallurgy, 49 (3). pp. 206-208. ISSN 0032-5899 (Print), 1743-2901 (Online) (doi:https://doi.org/10.1179/174329006X152442)

latency

Sparrow, R.D., Adekunle, A.A., Berry, R.J. and Farnish, R.J. (2015) Balancing throughput and latency for an aerial robot over a wireless secure communication link. In: 2015 IEEE 2nd International Conference on Cybernetics (CYBCONF). IEEE, pp. 184-189. ISBN 978-1-4799-8320-9 (doi:https://doi.org/10.1109/CYBConf.2015.7175929)

local environments

Farnish, R.J., Berry, R. and Bradley, M. (2008) Development of a novel - filling technique loading bulk particulate materials into tankers or processes. Bulk Solids Handling, 28 (4). pp. 238-241. ISSN 0173-9980

mass transfer

Farnish, R.J. (1997) Power consumption and profit margins - less is more. Powder Handling and Processing, 9 (4). pp. 355-357. ISSN 0934-7348

materials and process

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2005) Segregation of metal powders. In: Euro PM 2005: Powder Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA), Prague, Czech Republic, pp. 61-66. ISBN 9781899072187

Materials handling

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2010) Testing of powders for sensitivity to air effect segregation. In: Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Florence, pp. 53-60. ISBN 978-189907219-4

Farnish, R.J., Berry, R. and Bradley, M. (2008) Development of a novel - filling technique loading bulk particulate materials into tankers or processes. Bulk Solids Handling, 28 (4). pp. 238-241. ISSN 0173-9980

Farnish, R.J. (2004) Choosing the right storage vessel for your continuous operation. Powder and Bulk Engineering, 18 (11). pp. 33-37. ISSN 0897-6627

materials handling equipment

Farnish, R.J. (2004) Choosing the right storage vessel for your continuous operation. Powder and Bulk Engineering, 18 (11). pp. 33-37. ISSN 0897-6627

materials testing

Farnish, R.J. (2004) Choosing the right storage vessel for your continuous operation. Powder and Bulk Engineering, 18 (11). pp. 33-37. ISSN 0897-6627

Measurements of

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2010) Testing of powders for sensitivity to air effect segregation. In: Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Florence, pp. 53-60. ISBN 978-189907219-4

Mechanical properties

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2010) Testing of powders for sensitivity to air effect segregation. In: Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Florence, pp. 53-60. ISBN 978-189907219-4

metal powder quality

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2006) Predicting segregation of metal powders. Powder Metallurgy, 49 (3). pp. 206-208. ISSN 0032-5899 (Print), 1743-2901 (Online) (doi:https://doi.org/10.1179/174329006X152442)

metal powders segregation

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2006) Predicting segregation of metal powders. Powder Metallurgy, 49 (3). pp. 206-208. ISSN 0032-5899 (Print), 1743-2901 (Online) (doi:https://doi.org/10.1179/174329006X152442)

narrow size distributions

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2005) Segregation of metal powders. In: Euro PM 2005: Powder Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA), Prague, Czech Republic, pp. 61-66. ISBN 9781899072187

Optimisations

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2010) Testing of powders for sensitivity to air effect segregation. In: Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Florence, pp. 53-60. ISBN 978-189907219-4

particle adhesion

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2011) Centrifugal tester versus a novel design to measure particle adhesion strength and investigation of effect of physical characteristics (size, shape, density) of food particles on food surfaces. Journal of Food Engineering, 104 (4). pp. 518-524. ISSN 0260-8774 (doi:https://doi.org/10.1016/j.jfoodeng.2011.01.008)

particle densities

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2005) Segregation of metal powders. In: Euro PM 2005: Powder Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA), Prague, Czech Republic, pp. 61-66. ISBN 9781899072187

particle size

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2005) Segregation of metal powders. In: Euro PM 2005: Powder Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA), Prague, Czech Republic, pp. 61-66. ISBN 9781899072187

particle size analysis

Farnish, R.J. (2004) Choosing the right storage vessel for your continuous operation. Powder and Bulk Engineering, 18 (11). pp. 33-37. ISSN 0897-6627

Salter, G.F., Farnish, R.J., Bradley, M.S.A. and Burnett, A.J. (2000) Segregation of binary mixtures of particles during the filling of a two-dimensional representation of a hopper. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 214 (3). pp. 197-208. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:https://doi.org/10.1243/0954408001530056)

particles

Salter, G.F., Farnish, R.J., Bradley, M.S.A. and Burnett, A.J. (2000) Segregation of binary mixtures of particles during the filling of a two-dimensional representation of a hopper. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 214 (3). pp. 197-208. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:https://doi.org/10.1243/0954408001530056)

particles (particulate matter)

Farnish, R.J. (1997) Power consumption and profit margins - less is more. Powder Handling and Processing, 9 (4). pp. 355-357. ISSN 0934-7348

particulate materials

Farnish, R.J., Berry, R. and Bradley, M. (2008) Development of a novel - filling technique loading bulk particulate materials into tankers or processes. Bulk Solids Handling, 28 (4). pp. 238-241. ISSN 0173-9980

Salter, G.F., Farnish, R.J., Bradley, M.S.A. and Burnett, A.J. (2000) Segregation of binary mixtures of particles during the filling of a two-dimensional representation of a hopper. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 214 (3). pp. 197-208. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:https://doi.org/10.1243/0954408001530056)

particulate matter

Salter, G.F., Farnish, R.J., Bradley, M.S.A. and Burnett, A.J. (2000) Segregation of binary mixtures of particles during the filling of a two-dimensional representation of a hopper. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 214 (3). pp. 197-208. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:https://doi.org/10.1243/0954408001530056)

Permeability

Bianchini, A., Farnish, R.J., Gambuti, M. and Saccani, C. (2016) Predictive model for corn flour discharge rates through an aerated hopper. Powder Technology, 298. pp. 84-89. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2016.05.009)

pipelines

Deng, T. ORCID: 0000-0003-4117-4317 , Farnish, R.J. and Bradley, M.S.A. (2007) Pressure drop in dense phase conveying. Bulk Solids Handling, 27 (5). pp. 296-301. ISSN 0173-9980

Farnish, R.J. (1997) Power consumption and profit margins - less is more. Powder Handling and Processing, 9 (4). pp. 355-357. ISSN 0934-7348

pneumatic conveying pipelines

Deng, T. ORCID: 0000-0003-4117-4317 , Farnish, R.J. and Bradley, M.S.A. (2007) Pressure drop in dense phase conveying. Bulk Solids Handling, 27 (5). pp. 296-301. ISSN 0173-9980

pneumatic conveyors

Deng, T. ORCID: 0000-0003-4117-4317 , Farnish, R.J. and Bradley, M.S.A. (2007) Pressure drop in dense phase conveying. Bulk Solids Handling, 27 (5). pp. 296-301. ISSN 0173-9980

Farnish, R.J. (1997) Power consumption and profit margins - less is more. Powder Handling and Processing, 9 (4). pp. 355-357. ISSN 0934-7348

powder flow

Angulo Pinzon, O.A., Berry, R.J., Bradley, M.S., Farnish, R.J. and Antonijevic, M.D. ORCID: 0000-0002-5847-7886 (2009) The impact of powder flowing properties on dosator filling system operation. In: 2009 AAPS Annual Meeting and Exposition, 8-12 Nov 2009, Los Angeles, USA.

Powder metallurgy

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2010) Testing of powders for sensitivity to air effect segregation. In: Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Florence, pp. 53-60. ISBN 978-189907219-4

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2005) Segregation of metal powders. In: Euro PM 2005: Powder Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA), Prague, Czech Republic, pp. 61-66. ISBN 9781899072187

Powder metals

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2010) Testing of powders for sensitivity to air effect segregation. In: Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Florence, pp. 53-60. ISBN 978-189907219-4

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2005) Segregation of metal powders. In: Euro PM 2005: Powder Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA), Prague, Czech Republic, pp. 61-66. ISBN 9781899072187

powders

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2011) Testing of powders for sensitivity to air effect segregation. Powder Metallurgy, 54 (4). pp. 468-470. ISSN 0032-5899 (Print), 1743-2901 (Online) (doi:https://doi.org/10.1179/174329011X13073642060730)

power consumption

Farnish, R.J. (1997) Power consumption and profit margins - less is more. Powder Handling and Processing, 9 (4). pp. 355-357. ISSN 0934-7348

pressure drop

Deng, T. ORCID: 0000-0003-4117-4317 , Farnish, R.J. and Bradley, M.S.A. (2007) Pressure drop in dense phase conveying. Bulk Solids Handling, 27 (5). pp. 296-301. ISSN 0173-9980

probes

Salter, G.F., Farnish, R.J., Bradley, M.S.A. and Burnett, A.J. (2000) Segregation of binary mixtures of particles during the filling of a two-dimensional representation of a hopper. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 214 (3). pp. 197-208. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:https://doi.org/10.1243/0954408001530056)

production control

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2006) Predicting segregation of metal powders. Powder Metallurgy, 49 (3). pp. 206-208. ISSN 0032-5899 (Print), 1743-2901 (Online) (doi:https://doi.org/10.1179/174329006X152442)

quality control

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2005) Segregation of metal powders. In: Euro PM 2005: Powder Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA), Prague, Czech Republic, pp. 61-66. ISBN 9781899072187

representative sample

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2005) Segregation of metal powders. In: Euro PM 2005: Powder Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA), Prague, Czech Republic, pp. 61-66. ISBN 9781899072187

rolling

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2006) Predicting segregation of metal powders. Powder Metallurgy, 49 (3). pp. 206-208. ISSN 0032-5899 (Print), 1743-2901 (Online) (doi:https://doi.org/10.1179/174329006X152442)

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2005) Segregation of metal powders. In: Euro PM 2005: Powder Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA), Prague, Czech Republic, pp. 61-66. ISBN 9781899072187

rolling segregation

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2006) Predicting segregation of metal powders. Powder Metallurgy, 49 (3). pp. 206-208. ISSN 0032-5899 (Print), 1743-2901 (Online) (doi:https://doi.org/10.1179/174329006X152442)

security

Sparrow, R.D., Adekunle, A.A., Berry, R.J. and Farnish, R.J. (2015) Balancing throughput and latency for an aerial robot over a wireless secure communication link. In: 2015 IEEE 2nd International Conference on Cybernetics (CYBCONF). IEEE, pp. 184-189. ISBN 978-1-4799-8320-9 (doi:https://doi.org/10.1109/CYBConf.2015.7175929)

Segregation (metallography)

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2010) Testing of powders for sensitivity to air effect segregation. In: Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Florence, pp. 53-60. ISBN 978-189907219-4

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2006) Predicting segregation of metal powders. Powder Metallurgy, 49 (3). pp. 206-208. ISSN 0032-5899 (Print), 1743-2901 (Online) (doi:https://doi.org/10.1179/174329006X152442)

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2005) Segregation of metal powders. In: Euro PM 2005: Powder Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA), Prague, Czech Republic, pp. 61-66. ISBN 9781899072187

Farnish, R.J. (2004) Choosing the right storage vessel for your continuous operation. Powder and Bulk Engineering, 18 (11). pp. 33-37. ISSN 0897-6627

segregation effects

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2006) Predicting segregation of metal powders. Powder Metallurgy, 49 (3). pp. 206-208. ISSN 0032-5899 (Print), 1743-2901 (Online) (doi:https://doi.org/10.1179/174329006X152442)

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2005) Segregation of metal powders. In: Euro PM 2005: Powder Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA), Prague, Czech Republic, pp. 61-66. ISBN 9781899072187

Segregation potential

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2010) Testing of powders for sensitivity to air effect segregation. In: Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Florence, pp. 53-60. ISBN 978-189907219-4

segregation process

Salter, G.F., Farnish, R.J., Bradley, M.S.A. and Burnett, A.J. (2000) Segregation of binary mixtures of particles during the filling of a two-dimensional representation of a hopper. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 214 (3). pp. 197-208. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:https://doi.org/10.1243/0954408001530056)

sensitivity

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2011) Testing of powders for sensitivity to air effect segregation. Powder Metallurgy, 54 (4). pp. 468-470. ISSN 0032-5899 (Print), 1743-2901 (Online) (doi:https://doi.org/10.1179/174329011X13073642060730)

Sintered products

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2010) Testing of powders for sensitivity to air effect segregation. In: Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Florence, pp. 53-60. ISBN 978-189907219-4

size distribution

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2005) Segregation of metal powders. In: Euro PM 2005: Powder Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA), Prague, Czech Republic, pp. 61-66. ISBN 9781899072187

small particle size

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2005) Segregation of metal powders. In: Euro PM 2005: Powder Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA), Prague, Czech Republic, pp. 61-66. ISBN 9781899072187

smooth wall

Farnish, R.J., Berry, R. and Bradley, M. (2008) Development of a novel - filling technique loading bulk particulate materials into tankers or processes. Bulk Solids Handling, 28 (4). pp. 238-241. ISSN 0173-9980

solid-solid separation

Salter, G.F., Farnish, R.J., Bradley, M.S.A. and Burnett, A.J. (2000) Segregation of binary mixtures of particles during the filling of a two-dimensional representation of a hopper. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 214 (3). pp. 197-208. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:https://doi.org/10.1243/0954408001530056)

storage

Farnish, R.J. (2003) Feeding of the 5,000 (-ton silo). Powder and Bulk Engineering, 17 (5). p. 10. ISSN 0897-6627

storage (materials)

Farnish, R.J. (2004) Choosing the right storage vessel for your continuous operation. Powder and Bulk Engineering, 18 (11). pp. 33-37. ISSN 0897-6627

storage vessel

Farnish, R.J. (2004) Choosing the right storage vessel for your continuous operation. Powder and Bulk Engineering, 18 (11). pp. 33-37. ISSN 0897-6627

surface segregation

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2005) Segregation of metal powders. In: Euro PM 2005: Powder Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA), Prague, Czech Republic, pp. 61-66. ISBN 9781899072187

tankers (ships)

Farnish, R.J., Berry, R. and Bradley, M. (2008) Development of a novel - filling technique loading bulk particulate materials into tankers or processes. Bulk Solids Handling, 28 (4). pp. 238-241. ISSN 0173-9980

technology

Farnish, R.J. (2007) A changing world demands realistic expectations. Powder and Bulk Engineering, 21 (6). p. 8. ISSN 0897-6627

Test apparatus

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2010) Testing of powders for sensitivity to air effect segregation. In: Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Florence, pp. 53-60. ISBN 978-189907219-4

Test equipments

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2010) Testing of powders for sensitivity to air effect segregation. In: Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Florence, pp. 53-60. ISBN 978-189907219-4

test facilities

Salter, G.F., Farnish, R.J., Bradley, M.S.A. and Burnett, A.J. (2000) Segregation of binary mixtures of particles during the filling of a two-dimensional representation of a hopper. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 214 (3). pp. 197-208. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:https://doi.org/10.1243/0954408001530056)

thieving probes

Salter, G.F., Farnish, R.J., Bradley, M.S.A. and Burnett, A.J. (2000) Segregation of binary mixtures of particles during the filling of a two-dimensional representation of a hopper. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 214 (3). pp. 197-208. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:https://doi.org/10.1243/0954408001530056)

throughput

Sparrow, R.D., Adekunle, A.A., Berry, R.J. and Farnish, R.J. (2015) Balancing throughput and latency for an aerial robot over a wireless secure communication link. In: 2015 IEEE 2nd International Conference on Cybernetics (CYBCONF). IEEE, pp. 184-189. ISBN 978-1-4799-8320-9 (doi:https://doi.org/10.1109/CYBConf.2015.7175929)

time dependent properties

Farnish, R.J. (2004) Choosing the right storage vessel for your continuous operation. Powder and Bulk Engineering, 18 (11). pp. 33-37. ISSN 0897-6627

University of Greenwich

Farnish, R.J., Berry, R. and Bradley, M. (2008) Development of a novel - filling technique loading bulk particulate materials into tankers or processes. Bulk Solids Handling, 28 (4). pp. 238-241. ISSN 0173-9980

unmanned aerial vehicles

Sparrow, R.D., Adekunle, A.A., Berry, R.J. and Farnish, R.J. (2015) Balancing throughput and latency for an aerial robot over a wireless secure communication link. In: 2015 IEEE 2nd International Conference on Cybernetics (CYBCONF). IEEE, pp. 184-189. ISBN 978-1-4799-8320-9 (doi:https://doi.org/10.1109/CYBConf.2015.7175929)

velocity

Salter, G.F., Farnish, R.J., Bradley, M.S.A. and Burnett, A.J. (2000) Segregation of binary mixtures of particles during the filling of a two-dimensional representation of a hopper. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 214 (3). pp. 197-208. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:https://doi.org/10.1243/0954408001530056)

vessel design

Farnish, R.J. (2004) Choosing the right storage vessel for your continuous operation. Powder and Bulk Engineering, 18 (11). pp. 33-37. ISSN 0897-6627

vibration control

Salter, G.F., Farnish, R.J., Bradley, M.S.A. and Burnett, A.J. (2000) Segregation of binary mixtures of particles during the filling of a two-dimensional representation of a hopper. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 214 (3). pp. 197-208. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:https://doi.org/10.1243/0954408001530056)

volumetric efficiency

Farnish, R.J., Berry, R. and Bradley, M. (2008) Development of a novel - filling technique loading bulk particulate materials into tankers or processes. Bulk Solids Handling, 28 (4). pp. 238-241. ISSN 0173-9980

wall flow

Farnish, R.J. (2004) Choosing the right storage vessel for your continuous operation. Powder and Bulk Engineering, 18 (11). pp. 33-37. ISSN 0897-6627

wireless

Sparrow, R.D., Adekunle, A.A., Berry, R.J. and Farnish, R.J. (2015) Balancing throughput and latency for an aerial robot over a wireless secure communication link. In: 2015 IEEE 2nd International Conference on Cybernetics (CYBCONF). IEEE, pp. 184-189. ISBN 978-1-4799-8320-9 (doi:https://doi.org/10.1109/CYBConf.2015.7175929)

Wolfson (CO)

Farnish, R.J., Berry, R. and Bradley, M. (2008) Development of a novel - filling technique loading bulk particulate materials into tankers or processes. Bulk Solids Handling, 28 (4). pp. 238-241. ISSN 0173-9980

This list was generated on Fri Apr 26 10:40:20 2024 UTC.