Article

Baroyi, Syahrul Anis Hazwani Mohd, Abel, Stashia Eleaness Rosland, Al-Awaadh, Alhussein M, Fikry, Mohammad, Shah, Nor Nadiah Abdul Karim, Salleh, Faiqa Shazeaa Mohd, Garg, Vivek ORCID: 0000-0002-8515-4759 , Deng, Tong ORCID: 0000-0003-4117-4317 and Yusof, Yus Aniza (2024) Sweet flow: exploring the flowability, caking, morphology, and solubility of date sugars as promising sugar substitutes. Powder Technology. ISSN 0032-5910 (Print), 0032-5910 (Online) (doi:https://doi.org/10.1016/j.powtec.2024.119925)

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael (2024) Erosive wear of structured Carbon-fibre-reinforced textile polymer composites under sands blasting. Lubricants, 12 (3):94. pp. 1-13. ISSN 2075-4442 (Online) (doi:https://doi.org/10.3390/lubricants12030094)

Deng, Tong ORCID: 0000-0003-4117-4317 , Massaro Sousa, Lucas ORCID: 0000-0002-4182-9347 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael S.A. (2023) Segregation of formulated powders in direct compression process and evaluations by small bench-scale testers. International Journal of Pharmaceutics, 647:123544. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2023.123544)

Salehi Kahrizsangi, Hamid ORCID: 0000-0002-2516-6619 , Cummins, John, Gallino, Enrico, Garg, Vivek ORCID: 0000-0002-8515-4759 , Deng, Tong ORCID: 0000-0003-4117-4317 , Hassanpour, Ali and Bradley, Michael (2023) Optimising spread-layer quality in powder additive manufacturing: assessing packing fraction and segregation tendency. Processes, 11 (8):2276. pp. 1-22. ISSN 2227-9717 (Online) (doi:https://doi.org/10.3390/pr11082276)

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael (2023) Electrostatic charging of fine powders and assessment of charge polarity using an inductive charge sensor. Nanomanufacturing, 3 (3). pp. 281-292. ISSN 2673-687X (Online) (doi:https://doi.org/10.3390/nanomanufacturing3030018)

Hussain, Tariq, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael, Armour-Chelu, David, Pillai, John, Saadat, Salman and Kaialy, Waseem (2023) Noise reduction by using wavelet transform in charge signal acquired from an electrostatic inductive sensor. Measurement: Sensors, 27:100757. pp. 1-4. ISSN 2665-9174 (Online) (doi:https://doi.org/10.1016/j.measen.2023.100757)

Singh, Gulab, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael and Ellis, Richard (2023) Advanced assessment of biomass materials degradation in pneumatic conveying systems: challenges and applications. Applied Sciences, 13:1960. pp. 1-13. ISSN 2076-3417 (Online) (doi:https://doi.org/10.3390/app13031960)

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Diaz, Laura Pereira, Markl, Daniel, Brown, Cameron, Florence, Alastair and Bradley, Michael S.A. (2022) Comparative studies of powder flow predictions using milligrams of powder for identifying powder flow issues. International Journal of Pharmaceutics, 628:122309. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2022.122309)

Jiang, Yang, Deng, Tong ORCID: 0000-0003-4117-4317 and Nasr, Karim ORCID: 0000-0002-8604-6274 (2022) Baseline tracking in bipolar charge signal process by dynamic time warping algorithm. IEEE Sensors Journal, 23 (5). 4540 -4547. ISSN 1530-437X (Print), 1558-1748 (Online) (doi:https://doi.org/10.1109/JSEN.2022.3162494)

Garg, Vivek ORCID: 0000-0002-8515-4759 , Deng, Tong ORCID: 0000-0003-4117-4317 and Bradley, Michael (2021) A new method for assessing powder flowability based on physical properties and cohesiveness of particles using a small quantity of samples. Powder Technology. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.10.027)

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael S.A. (2021) A study of particle adhesion for cohesive powders using a novel mechanical surface energy tester. Powder Technology, 391. pp. 46-56. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.06.002)

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Salehi, Hamid ORCID: 0000-0002-2516-6619 and Bradley, Michael S. A. (2021) Correlations between segregation intensity and material properties such as particle sizes and adhesions and novel methods for assessment. Powder Technology, 387. pp. 215-226. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.04.023)

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Salehi, Hamid ORCID: 0000-0002-2516-6619 and Bradley, Michael S. A. (2020) An experimental study on free-surface rolling segregation and correlations with angle of repose and particle sphericity. Powder Technology, 379. pp. 307-320. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2020.10.077)

Zhang, Guangdong ORCID: 0000-0003-0285-6745 , Huang, Xiang, Li, Shuanggao, Xia, Chao and Deng, Tong ORCID: 0000-0003-4117-4317 (2020) Improved inverse design method for thin-wall hollow profiled polymer extrusion die based on FEM-CFD simulations. The International Journal of Advanced Manufacturing Technology, 106 (7-8). pp. 2909-2919. ISSN 0268-3768 (Print), 1433-3015 (Online) (doi:https://doi.org/10.1007/s00170-019-04785-w)

Zhang, Guangdong, Huang, Xiang, Li, Shuanggao and Deng, Tong ORCID: 0000-0003-4117-4317 (2019) Optimized design method for profile extrusion die based on NURBS modeling. Fibers and Polymers, 20 (8). pp. 1733-1741. ISSN 1229-9197 (Print), 1875-0052 (Online) (doi:https://doi.org/10.1007/s12221-019-1168-y)

Salehi, Hamid ORCID: 0000-0002-2516-6619 , Berry, Robert, Deng, Tong ORCID: 0000-0003-4117-4317 , Larsson, Sylvia H., Farnish, Richard and Bradley, Mike (2019) Development and application of a novel cake strength tester. Powder Technology, 350. pp. 36-42. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2019.03.024)

Deng, Tong ORCID: 0000-0003-4117-4317 , Alzahrani, Abdullah M. and Bradley, Michael S. (2018) Influences of environmental humidity on physical properties and attrition of wood pellets. Fuel Processing Technology, 185. pp. 126-138. ISSN 0378-3820 (doi:https://doi.org/10.1016/j.fuproc.2018.12.010)

Shang, Zhigen, Deng, Tong ORCID: 0000-0003-4117-4317 , He, Jianqiang and Duan, Xiaohui (2018) A novel model for hourly PM2.5 concentration prediction based on CART and EELM. Science of The Total Environment, 651 (2). pp. 3043-3052. ISSN 0048-9697 (Print), 1879-1026 (Online) (doi:https://doi.org/10.1016/j.scitotenv.2018.10.193)

Deng, Tong ORCID: 0000-0003-4117-4317 and Bradley, Michael (2016) Determination of a particle size distribution criterion for predicting dense phase pneumatic conveying behaviour of granular and powder materials. Powder Technology, 304. pp. 32-40. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2016.05.001)

Hussain, Tariq, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael Samuel, Armour-Chélu, David, Gorman, Terry and Kaialy, Waseem (2016) Evaluation studies of a sensing technique for electrostatic charge polarity of pharmaceutical particulates. IET Science Measurement and Technology, 10 (5). pp. 442-448. ISSN 1751-8822 (Print), 1751-8830 (Online) (doi:https://doi.org/10.1049/iet-smt.2015.0194)

Cai, Guohua, Berry, Robert and Deng, Tong ORCID: 0000-0003-4117-4317 (2016) Analysis on flowability of cement based on powder flow tester. China Powder Science and Technology, 22 (1):120. pp. 97-100. ISSN 1008-5548 (doi:https://doi.org/10.13732/j.issn.1008-5548.2016.01.023)

Chen, Jinhu, Trevarthen, James A., Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S.A., Rahatekar, Sameer S. and Koziol, Krzysztof K.K. (2014) Aligned carbon nanotube reinforced high performance polymer composites with low erosive wear. Composites Part A: Applied Science and Manufacturing, 67. pp. 86-95. ISSN 1359-835X (doi:https://doi.org/10.1016/j.compositesa.2014.08.009)

Chen, Jinhu, Hutchings, Ian M., Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A. and Koziol, Krzysztof K. K. (2014) The effect of carbon nanotube orientation on erosive wear resistance of CNT-epoxy based composites. Carbon, 73. pp. 421-431. ISSN 0008-6223 (doi:https://doi.org/10.1016/j.carbon.2014.02.083)

Deng, Tong ORCID: 0000-0003-4117-4317 and Hussain, Tariq (2013) Taking charge. Solids & Bulk Handling. pp. 10-12.

Hussain, Tariq, Kaialy, Waseem, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Mike S.A., Nokhodchi, Ali and Armour-Chélu, David (2012) Measurement of electrostatic charge on particles using a novel approach. International Journal of Pharmaceutics, 441 (1-2). pp. 781-789. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2012.10.002)

Hussain, Tariq, Kaialy, Waseem, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Mike S.A., Nokhodchi, Ali and Armour-Chélu, David (2012) A novel sensing technique for measurement of magnitude and polarity of electrostatic charge distribution across individual particles. International Journal of Pharmaceutics, 441 (1-2). pp. 781-789. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2012.10.002)

Deng, Tong ORCID: 0000-0003-4117-4317 , Paul, Kirsty A., Bradley, Michael S.A., Immins, Lee, Preston, Chris, Scott, Jerry F. and Welfare, Eloise H. (2010) Investigations on air induced segregation of pharmaceutical powders and effect of material flow functions. Powder Technology, 203 (2). pp. 354-358. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2010.05.028)

Deng, Tong ORCID: 0000-0003-4117-4317 , Bingley, Mark S. and Bradley, Mike S.A. (2009) Understanding particle dynamics in erosion testers: a review of influences of particle movement on erosion test conditions. Wear, 267 (11). pp. 2132-2140. ISSN 0043-1648 (doi:https://doi.org/10.1016/j.wear.2009.02.020)

Deng, Tong ORCID: 0000-0003-4117-4317 , Farnish, Richard J. and Bradley, Michael S.A. (2008) Evaluation of particle degradation due to high-speed impacts in a pneumatic handling system. Particulate Science and Technology, 26 (5). pp. 438-450. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:https://doi.org/10.1080/02726350802367522)

Deng, Tong ORCID: 0000-0003-4117-4317 , Bingley, Mark S. and Bradley, Michael S. A. (2004) The influence of particle rotation on the solid particle erosion rate of metals. Wear, 256 (11-12). pp. 1037-1049. ISSN 0043-1648 (doi:https://doi.org/10.1016/S0043-1648(03)00536-2)

Book Section

Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A., Berry, Rob and Kostuch, J. (2008) Caking strength of granulated clay under frozen conditions. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 604-609. ISBN 9788272062896

Conference Proceedings

Singh, Gulab, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael and Ellis, Richard (2023) Evaluation and calibration of wood pellets degradation using a rotary impact tester against single-bend attrition tester. In: ICBMH2023 14th International Conference on Bulk Materials Storage, Handling and Transportation. Proceedings. Wollongong, NSW, Australia, 11th - 13th July, 2023. Engineers Australia, University of Wollongong, New South Wales, Australia, pp. 309-320. ISBN 978‐1925627831

Dissanayake Mudiyanselage, Susantha ORCID: 0000-0002-0953-379X , Bradley, Michael, Zigan, Stefan, Salehi Kahrizsangi, Hamid ORCID: 0000-0002-2516-6619 and Deng, Tong ORCID: 0000-0003-4117-4317 (2023) Frequency domain analysis to identify main segregation contributors in a chain of material handling. In: ICBMH2023: 14th International Conference on Bulk Materials Storage, Handling and Transportation. ICBMH - The Institution of Engineers, Wollongong, NSW Australia, pp. 372-380. ISBN 978-1925627831

Lakshman, Biju, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A., Okereke, Michael ORCID: 0000-0002-2104-012X and McIlhagger, A. T. (2014) Erosive wear of polymer composite materials and its correlation with high strain rate mechanical properties. In: 2nd International Conference on Abrasive Processes - ICAP 2014 (Programme and Abstract Book). ICAP, Cambridge, United Kingdom, p. 24.

Conference or Conference Paper

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael (2024) Effects of electrostatic charge on particle adhesion, cohesiveness and its influences on powder flow properties. In: 11th International Conference on Conveying and Handling of Particulate Solids, 2nd -4th Sep., 2024, Edinburgh. (Unpublished)

Garg, Vivek ORCID: 0000-0002-8515-4759 , Deng, Tong ORCID: 0000-0003-4117-4317 and Bradley, Michael (2024) Effects of relative humidity and temperature on particle adhesion measurements using mechanical surface energy tester. In: 11th International Conference on Conveying and Handling of Particulate Solids, 2nd -4th Sep., 2024, Edinburgh. (In Press)

Garg, Vivek ORCID: 0000-0002-8515-4759 , Deng, Tong ORCID: 0000-0003-4117-4317 , Sousa, Lucas Massaro and Bradley, Michael (2024) Evaluation of segregation of pharmaceutical formulations in direct compression process. In: 11th International Conference on Conveying and Handling of Particulate Solids, 2nd -4th Sep., 2024, Edinburgh. (In Press)

Bradley, Michael, Farnish, Richard and Deng, Tong ORCID: 0000-0003-4117-4317 (2011) Predicting and preventing wear in pneumatic conveying systems. In: BulkSolids India 2011, 6-8 April 2011, Mumbai, India. (Unpublished)