adhesion

Ermis, Ertan, Farnish, Richard J., Berry, Rob and Bradley, Michael S. A. (2008) Direct measurement of powder flavour adhesion on to a food surface using a novel adhesion tester. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 803-810. ISBN 9788272062896

angle of repose

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Salehi, Hamid ORCID: 0000-0002-2516-6619 and Bradley, Michael S. A. (2020) An experimental study on free-surface rolling segregation and correlations with angle of repose and particle sphericity. Powder Technology, 379. pp. 307-320. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2020.10.077)

bio-powder

Ermis, Ertan, Farnish, Richard J., Berry, Rob and Bradley, Michael S. A. (2008) Direct measurement of powder flavour adhesion on to a food surface using a novel adhesion tester. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 803-810. ISBN 9788272062896

bulk particulates

Ariza-Zafra, K., Berry, Robert and Bradley, Michael S. A. (2008) Review of models for predicting the discharge rates of bulk particulates from silos and bins. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 484-492. ISBN 9788272062896

Farnish, Richard J., Kulkarni, Prasanna and Bradley, Michael S. A. (2008) Segregation of bulk particulates through multiple process handling steps. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 505-510. ISBN 9788272062896

bulk solids handling

Bradley, Michael S. A., Berry, Rob, Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia. (Unpublished)

carbon nanotubes

Chen, Jinhu, Hutchings, Ian M., Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A. and Koziol, Krzysztof K. K. (2014) The effect of carbon nanotube orientation on erosive wear resistance of CNT-epoxy based composites. Carbon, 73. pp. 421-431. ISSN 0008-6223 (doi:https://doi.org/10.1016/j.carbon.2014.02.083)

coating

Ermis, Ertan, Farnish, Richard J., Berry, Rob and Bradley, Michael S. A. (2008) Direct measurement of powder flavour adhesion on to a food surface using a novel adhesion tester. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 803-810. ISBN 9788272062896

continuum modeling

Christakis, Nicholas, Chapelle, Pierre, Strusevich, Nadezhda, Bridle, Ian, Baxter, John, Patel, Mayur K., Cross, Mark, Tüzün, Ugur, Reed, Alan R. and Bradley, Michael S. A. (2006) A hybrid numerical model for predicting segregation during core flow discharge. Advanced Powder Technology, 17 (6). pp. 641-662. ISSN 0921-8831 (doi:https://doi.org/10.1163/156855206778917715)

core flow

Christakis, Nicholas, Chapelle, Pierre, Strusevich, Nadezhda, Bridle, Ian, Baxter, John, Patel, Mayur K., Cross, Mark, Tüzün, Ugur, Reed, Alan R. and Bradley, Michael S. A. (2006) A hybrid numerical model for predicting segregation during core flow discharge. Advanced Powder Technology, 17 (6). pp. 641-662. ISSN 0921-8831 (doi:https://doi.org/10.1163/156855206778917715)

crisps

Ermis, Ertan, Farnish, Richard J., Berry, Rob and Bradley, Michael S. A. (2008) Direct measurement of powder flavour adhesion on to a food surface using a novel adhesion tester. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 803-810. ISBN 9788272062896

discharge rates

Ariza-Zafra, K., Berry, Robert and Bradley, Michael S. A. (2008) Review of models for predicting the discharge rates of bulk particulates from silos and bins. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 484-492. ISBN 9788272062896

equipment design

Berry, Rob, Bradley, Michael S. A., Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction test procedure, suitable for equipment design and powder characterisation. In: ICBMH Conference: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, Australia. (Unpublished)

erosion

Chen, Jinhu, Hutchings, Ian M., Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A. and Koziol, Krzysztof K. K. (2014) The effect of carbon nanotube orientation on erosive wear resistance of CNT-epoxy based composites. Carbon, 73. pp. 421-431. ISSN 0008-6223 (doi:https://doi.org/10.1016/j.carbon.2014.02.083)

Deng, Tong ORCID: 0000-0003-4117-4317 , Bingley, Mark S. and Bradley, Michael S. A. (2004) The influence of particle rotation on the solid particle erosion rate of metals. Wear, 256 (11-12). pp. 1037-1049. ISSN 0043-1648 (doi:https://doi.org/10.1016/S0043-1648(03)00536-2)

Erosive wear

Lakshman, Biju, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A., Okereke, Michael ORCID: 0000-0002-2104-012X and McIlhagger, A. T. (2014) Erosive wear of polymer composite materials and its correlation with high strain rate mechanical properties. In: 2nd International Conference on Abrasive Processes - ICAP 2014 (Programme and Abstract Book). ICAP, Cambridge, United Kingdom, p. 24.

flavouring powder

Ermis, Ertan, Farnish, Richard J., Berry, Rob and Bradley, Michael S. A. (2008) Direct measurement of powder flavour adhesion on to a food surface using a novel adhesion tester. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 803-810. ISBN 9788272062896

granular material

Christakis, Nicholas, Chapelle, Pierre, Strusevich, Nadezhda, Bridle, Ian, Baxter, John, Patel, Mayur K., Cross, Mark, Tüzün, Ugur, Reed, Alan R. and Bradley, Michael S. A. (2006) A hybrid numerical model for predicting segregation during core flow discharge. Advanced Powder Technology, 17 (6). pp. 641-662. ISSN 0921-8831 (doi:https://doi.org/10.1163/156855206778917715)

granulated clay

Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A., Berry, Rob and Kostuch, J. (2008) Caking strength of granulated clay under frozen conditions. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 604-609. ISBN 9788272062896

High strain rate

Lakshman, Biju, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A., Okereke, Michael ORCID: 0000-0002-2104-012X and McIlhagger, A. T. (2014) Erosive wear of polymer composite materials and its correlation with high strain rate mechanical properties. In: 2nd International Conference on Abrasive Processes - ICAP 2014 (Programme and Abstract Book). ICAP, Cambridge, United Kingdom, p. 24.

hydraulic machinery

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

hydraulic systems

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

Jenike shear cell

Bradley, Michael S. A., Berry, Rob, Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia. (Unpublished)

laboratories

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

lean phase

Kotzur, Benjamin A., Berry, Robert J., Zigan, Stefan, García-Triñanes, Pablo ORCID: 0000-0002-4993-2250 and Bradley, Michael S. A. (2018) Particle Attrition Mechanisms, their characterisation, and application to horizontal lean phase pneumatic conveying systems: A review. Powder Technology, 334. pp. 76-105. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2018.04.047)

Mechanical properties

Lakshman, Biju, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A., Okereke, Michael ORCID: 0000-0002-2104-012X and McIlhagger, A. T. (2014) Erosive wear of polymer composite materials and its correlation with high strain rate mechanical properties. In: 2nd International Conference on Abrasive Processes - ICAP 2014 (Programme and Abstract Book). ICAP, Cambridge, United Kingdom, p. 24.

metal target

Deng, Tong ORCID: 0000-0003-4117-4317 , Bingley, Mark S. and Bradley, Michael S. A. (2004) The influence of particle rotation on the solid particle erosion rate of metals. Wear, 256 (11-12). pp. 1037-1049. ISSN 0043-1648 (doi:https://doi.org/10.1016/S0043-1648(03)00536-2)

micro-physical parametrizations

Christakis, Nicholas, Chapelle, Pierre, Strusevich, Nadezhda, Bridle, Ian, Baxter, John, Patel, Mayur K., Cross, Mark, Tüzün, Ugur, Reed, Alan R. and Bradley, Michael S. A. (2006) A hybrid numerical model for predicting segregation during core flow discharge. Advanced Powder Technology, 17 (6). pp. 641-662. ISSN 0921-8831 (doi:https://doi.org/10.1163/156855206778917715)

Microstructures

Lakshman, Biju, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A., Okereke, Michael ORCID: 0000-0002-2104-012X and McIlhagger, A. T. (2014) Erosive wear of polymer composite materials and its correlation with high strain rate mechanical properties. In: 2nd International Conference on Abrasive Processes - ICAP 2014 (Programme and Abstract Book). ICAP, Cambridge, United Kingdom, p. 24.

modelling

Deng, Tong ORCID: 0000-0003-4117-4317 , Bingley, Mark S. and Bradley, Michael S. A. (2004) The influence of particle rotation on the solid particle erosion rate of metals. Wear, 256 (11-12). pp. 1037-1049. ISSN 0043-1648 (doi:https://doi.org/10.1016/S0043-1648(03)00536-2)

particle adhesion

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Salehi, Hamid ORCID: 0000-0002-2516-6619 and Bradley, Michael S. A. (2021) Correlations between segregation intensity and material properties such as particle sizes and adhesions and novel methods for assessment. Powder Technology, 387. pp. 215-226. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.04.023)

Particle attrition

Kotzur, Benjamin A., Berry, Robert J., Zigan, Stefan, García-Triñanes, Pablo ORCID: 0000-0002-4993-2250 and Bradley, Michael S. A. (2018) Particle Attrition Mechanisms, their characterisation, and application to horizontal lean phase pneumatic conveying systems: A review. Powder Technology, 334. pp. 76-105. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2018.04.047)

particle shape

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Salehi, Hamid ORCID: 0000-0002-2516-6619 and Bradley, Michael S. A. (2020) An experimental study on free-surface rolling segregation and correlations with angle of repose and particle sphericity. Powder Technology, 379. pp. 307-320. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2020.10.077)

particle size

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Salehi, Hamid ORCID: 0000-0002-2516-6619 and Bradley, Michael S. A. (2021) Correlations between segregation intensity and material properties such as particle sizes and adhesions and novel methods for assessment. Powder Technology, 387. pp. 215-226. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.04.023)

particle spin

Deng, Tong ORCID: 0000-0003-4117-4317 , Bingley, Mark S. and Bradley, Michael S. A. (2004) The influence of particle rotation on the solid particle erosion rate of metals. Wear, 256 (11-12). pp. 1037-1049. ISSN 0043-1648 (doi:https://doi.org/10.1016/S0043-1648(03)00536-2)

particulate clay

Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A., Berry, Rob and Kostuch, J. (2008) Caking strength of granulated clay under frozen conditions. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 604-609. ISBN 9788272062896

pipe

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

pneumatic conveying

Kotzur, Benjamin A., Berry, Robert J., Zigan, Stefan, García-Triñanes, Pablo ORCID: 0000-0002-4993-2250 and Bradley, Michael S. A. (2018) Particle Attrition Mechanisms, their characterisation, and application to horizontal lean phase pneumatic conveying systems: A review. Powder Technology, 334. pp. 76-105. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2018.04.047)

pneumatic conveying pipelines

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

pneumatic machinery

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

Polymer Composites

Lakshman, Biju, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A., Okereke, Michael ORCID: 0000-0002-2104-012X and McIlhagger, A. T. (2014) Erosive wear of polymer composite materials and its correlation with high strain rate mechanical properties. In: 2nd International Conference on Abrasive Processes - ICAP 2014 (Programme and Abstract Book). ICAP, Cambridge, United Kingdom, p. 24.

Chen, Jinhu, Hutchings, Ian M., Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A. and Koziol, Krzysztof K. K. (2014) The effect of carbon nanotube orientation on erosive wear resistance of CNT-epoxy based composites. Carbon, 73. pp. 421-431. ISSN 0008-6223 (doi:https://doi.org/10.1016/j.carbon.2014.02.083)

powder characterisation

Berry, Rob, Bradley, Michael S. A., Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction test procedure, suitable for equipment design and powder characterisation. In: ICBMH Conference: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, Australia. (Unpublished)

pumping machinery

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

rolling segregation

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Salehi, Hamid ORCID: 0000-0002-2516-6619 and Bradley, Michael S. A. (2020) An experimental study on free-surface rolling segregation and correlations with angle of repose and particle sphericity. Powder Technology, 379. pp. 307-320. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2020.10.077)

segregation

Farnish, Richard J., Kulkarni, Prasanna and Bradley, Michael S. A. (2008) Segregation of bulk particulates through multiple process handling steps. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 505-510. ISBN 9788272062896

Christakis, Nicholas, Chapelle, Pierre, Strusevich, Nadezhda, Bridle, Ian, Baxter, John, Patel, Mayur K., Cross, Mark, Tüzün, Ugur, Reed, Alan R. and Bradley, Michael S. A. (2006) A hybrid numerical model for predicting segregation during core flow discharge. Advanced Powder Technology, 17 (6). pp. 641-662. ISSN 0921-8831 (doi:https://doi.org/10.1163/156855206778917715)

segregation index

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Salehi, Hamid ORCID: 0000-0002-2516-6619 and Bradley, Michael S. A. (2021) Correlations between segregation intensity and material properties such as particle sizes and adhesions and novel methods for assessment. Powder Technology, 387. pp. 215-226. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.04.023)

shear testers

Bradley, Michael S. A., Berry, Rob, Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia. (Unpublished)

sphericity

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Salehi, Hamid ORCID: 0000-0002-2516-6619 and Bradley, Michael S. A. (2020) An experimental study on free-surface rolling segregation and correlations with angle of repose and particle sphericity. Powder Technology, 379. pp. 307-320. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2020.10.077)

sphericity ratio

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Salehi, Hamid ORCID: 0000-0002-2516-6619 and Bradley, Michael S. A. (2020) An experimental study on free-surface rolling segregation and correlations with angle of repose and particle sphericity. Powder Technology, 379. pp. 307-320. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2020.10.077)

surface segregation

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Salehi, Hamid ORCID: 0000-0002-2516-6619 and Bradley, Michael S. A. (2021) Correlations between segregation intensity and material properties such as particle sizes and adhesions and novel methods for assessment. Powder Technology, 387. pp. 215-226. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.04.023)

testing

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

tubing & valves

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.