Article

Berry, R.J., Bradley, M.S.A. and McGregor, R.G. (2014) Brookfield powder flow tester - Results of round robin tests with CRM-116 limestone powder. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 229 (3). pp. 215-230. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1177/0954408914525387)

Macchini, R., Bradley, M.S.A. and Deng, T. ORCID: https://orcid.org/0000-0003-4117-4317 (2013) Influence of particle size, density, particle concentration on bend erosive wear in pneumatic conveyors. Wear, 303 (1-2). pp. 21-29. ISSN 0043-1648 (doi:10.1016/j.wear.2013.02.014)

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2011) Testing of powders for sensitivity to air effect segregation. Powder Metallurgy, 54 (4). pp. 468-470. ISSN 0032-5899 (Print), 1743-2901 (Online) (doi:10.1179/174329011X13073642060730)

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2011) Centrifugal tester versus a novel design to measure particle adhesion strength and investigation of effect of physical characteristics (size, shape, density) of food particles on food surfaces. Journal of Food Engineering, 104 (4). pp. 518-524. ISSN 0260-8774 (doi:10.1016/j.jfoodeng.2011.01.008)

Ariza-Zafra, K., Berry, R., Bradley, M.S.A. and Santana, J.C. (2010) Achieving mass flow in silos with shallow converging sections using inverted cones. Bulk Solids Handling (Whitepaper). ISSN 0173-9980

Kulkarni, P.A., Berry, R.J. and Bradley, M.S.A. (2010) Review of the flowability measuring techniques for powder metallurgy industry. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 224 (3). pp. 159-168. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/09544089JPME299)

Robinson, J.P., Kingman, S.W., Snape, C.E., Barranco, R., Shang, H., Bradley, M.S.A. and Bradshaw, S.M. (2009) Remediation of oil-contaminated drill cuttings using continuous microwave heating. Chemical Engineering Journal, 152 (2-3). pp. 458-463. ISSN 1385-8947 (doi:10.1016/j.cej.2009.05.008)

Robinson, J.P., Kingman, S.W., Snape, C.E., Bradshaw, S.M., Bradley, M.S.A., Shang, H. and Barranco, R. (2009) Scale-up and design of a continuous microwave treatment system for the processing of oil-contaminated drill cuttings. Chemical Engineering Research and Design, 88 (2). pp. 146-154. ISSN 0263-8762 (doi:10.1016/j.cherd.2009.07.011)

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2009) Direct measurement of powder flavor adhesion onto crisp surface using a novel adhesion tester. Particulate Science and Technology, 27 (4). pp. 362-372. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:10.1080/02726350902994035)

Deng, T. ORCID: https://orcid.org/0000-0003-4117-4317, Bingley, M.S., Bradley, M.S.A. and De Silva, S.R. (2008) A comparison of the gas-blast and centrifugal-accelerator erosion testers: The influence of particle dynamics. Wear, 265 (7-8). pp. 945-955. ISSN 0043-1648 (doi:10.1016/j.wear.2008.02.017)

Deng, T. ORCID: https://orcid.org/0000-0003-4117-4317, Farnish, R.J. and Bradley, M.S.A. (2007) Pressure drop in dense phase conveying. Bulk Solids Handling, 27 (5). pp. 296-301. ISSN 0173-9980

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2006) Predicting segregation of metal powders. Powder Metallurgy, 49 (3). pp. 206-208. ISSN 0032-5899 (Print), 1743-2901 (Online) (doi:10.1179/174329006X152442)

Christakis, N., Wang, J., Patel, M.K., Bradley, M.S.A., Leaper, M.C. and Cross, M. (2006) Aggregation and caking processes of granular materials: continuum model and numerical simulation with application to sugar. Advanced Powder Technology, 17 (5). pp. 543-565. ISSN 0921-8831 (doi:10.1163/156855206778440480)

Deng, T. ORCID: https://orcid.org/0000-0003-4117-4317, Chaudhry, A.R., Patel, M., Hutchings, I. and Bradley, M.S.A. (2004) Effect of particle concentration on erosion rate of mild steel bends in a pneumatic conveyor. Wear, 258 (1-4). pp. 480-487. ISSN 0043-1648 (doi:10.1016/j.wear.2004.08.001)

Deng, T. ORCID: https://orcid.org/0000-0003-4117-4317, Li, J., Chaudhry, A.R., Patel, M., Hutchings, I. and Bradley, M.S.A. (2004) Comparison between weight loss of bends in a pneumatic conveyor and erosion rate obtained in a centrifugal erosion tester for the same materials. Wear, 258 (1-4). pp. 402-411. ISSN 0043-1648 (doi:10.1016/j.wear.2004.02.012)

Deng, T. ORCID: https://orcid.org/0000-0003-4117-4317, Patel, M., Hutchings, I. and Bradley, M.S.A. (2004) Effect of bend orientation on life and puncture point location due to solid particle erosion of a high concentration flow in pneumatic conveyors. Wear, 258 (1-4). pp. 426-433. ISSN 0043-1648 (doi:10.1016/j.wear.2004.02.010)

Chapelle, Pierre, Christakis, Nicholas, Abou-Chakra, Hadi, Bridle, Ian, Bradley, M.S.A., Patel, Mayur and Cross, Mark (2004) Computational model for prediction of particle degradation during dilute-phase pneumatic conveying: modeling of dilute-phase pneumatic conveying. Advanced Powder Technology, 15 (1). pp. 31-49. ISSN 0921-8831 (Print), 1568-5527 (Online) (doi:10.1163/15685520460740052)

Hanson, R., Allsopp, D., Deng, T. ORCID: https://orcid.org/0000-0003-4117-4317, Smith, D., Bradley, M.S.A., Hutchings, I.M. and Patel, M.K. (2002) A model to predict the life of pneumatic conveyor bends. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 216 (3). pp. 143-149. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/095440802320225284)

Salter, G.F., Farnish, R.J., Bradley, M.S.A. and Burnett, A.J. (2000) Segregation of binary mixtures of particles during the filling of a two-dimensional representation of a hopper. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 214 (3). pp. 197-208. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/0954408001530056)

Burnett, A.J., Bradley, M.S.A., O'Flynn, D.J., Deng, T. ORCID: https://orcid.org/0000-0003-4117-4317 and Bingley, M. (1999) Anomalies in the results obtained from rotating disc accelerator erosion testers: a discussion of possible causes. Wear, 233-5. pp. 275-283. ISSN 0043-1648 (doi:10.1016/s0043-1648(99)00227-6)

Schuster, T., Bradley, M.S.A. and Reed, Alan R. (1995) The dependence of power consumption of pneumatic conveying systems upon bulk material properties, pipeline bore and routing, and mode of flow. Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering, 209 (E1). pp. 69-75. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/PIME_PROC_1995_209_230_02)

Book Section

Chapelle, P., Christakis, N., Abou-Chakra, H., Tuzun, U., Bridle, I., Bradley, M.S.A., Patel, M.K. and Cross, M. (2003) Computational modelling of particle degradation in dilute phase pneumatic conveyors. In: Kumar, Vipin, Gavrilova, Marina L., Tan, Chih Jeng Kenneth and L’Ecuyer, Pierre, (eds.) Computational Science and Its Applications - ICCSA 2003. International Conference Montreal, Canada, May 18–21, 2003 Proceedings. Lecture Notes in Computer Science, Part I (2667). Springer, Berlin Heidelberg, pp. 493-502. ISBN 9783540401551 (doi:10.1007/3-540-44839-X_53)

Conference Proceedings

Deng, T. ORCID: https://orcid.org/0000-0003-4117-4317, Su, J.W., Zhang, Y., Bradley, M.S.A. and Wei, X.L. (2011) Making coal/biomass pellets for co-firing - a review and pioneer work. In: Proceedings of the Bioten Conference on Biomass Bioenergy and Biofuels 2010. CPL Press, Newbury, UK. ISBN 9781872691541

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2010) Testing of powders for sensitivity to air effect segregation. In: Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Florence, pp. 53-60. ISBN 978-189907219-4

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2005) Segregation of metal powders. In: Euro PM 2005: Powder Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA), Prague, Czech Republic, pp. 61-66. ISBN 9781899072187

Conference or Conference Paper

Owonikoko, A., Berry, R.J. and Bradley, M.S.A. (2010) Characterisation of extreme shape materials: “biomass and waste materials”. In: Bulk Solids Europe 2010 Conference and IMechE Symposium in New Frontiers in Bulk Materials Handling, 9-10 September 2010, Glasgow. (Unpublished)