Alshahed, Osamh S., Kaur, Baldeep ORCID: 0000-0002-1762-3058 , Bradley, Michael S.A. and Armour-Chelu, David (2024) Data-driven system identification and model predictive control of pneumatic conveying using nonlinear dynamics analysis for optimised energy consumption. Powder Technology, 449:120364. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2024.120364)

Premarathna, Chanaka Prasad, Kaur, Baldeep ORCID: 0000-0002-1762-3058 , Salehi Kahrizsangi, Hamid ORCID: 0000-0002-2516-6619 , Ellis, Richard and Bradley, Michael S.A. (2024) Application of Principal Component Analysis (PCA) and regression with lagged variables to identify the effect of blower speed and feed rate in pneumatic conveying. In: CHoPS 2024: 11th International Conference on Conveying and Handling of Particulate Solids, 2nd - 4th Sep., 2024, Edinburgh.

Alshahed, Osamh Sabri Mohammed Atia, Kaur, Baldeep ORCID: 0000-0002-1762-3058 , Bradley, Michael and Armour-Chelu, David (2024) Model predictive control simulation of pneumatic conveying of plastic pellets using nonlinear dynamics analysis and sparse identification of nonlinear dynamics with control. In: CHoPS 2024: 11th International Conference on Conveying and Handling of Particulate Solids, 2nd - 4th Sep., 2024, Edinburgh.

Hussaini, Zaki, Kaur, Baldeep ORCID: 0000-0002-1762-3058 , Sharma, Atul ORCID: 0000-0002-6756-4148 , Hancock, Ian and Bradley, Michael (2024) Ultrafine air-classification of plant based proteins: a step towards reducing carbon footprints. In: CHoPS 2024: 11th International Conference on Conveying and Handling of Particulate Solids, 2nd - 4th Sep., 2024, Edinburgh.

Kaur, Baldeep ORCID: 0000-0002-1762-3058 and Bradley, Michael (2024) The future: CO2 absorption (carbonation) and bulk materials handling. In: CHoPS 2024: 11th International Conference on Conveying and Handling of Particulate Solids, 2nd - 4th Sep., 2024, Edinburgh.

Talebi, Fatemeh A., Haydari, Zobaideh, Salehi Kahrizsangi, Hamid ORCID: 0000-0002-2516-6619 , Mehrabi, Mozhdeh, Gardy, Jabbar, Bradley, Michael, Bayly, Andrew E. and Hassanpour, Ali (2024) Spreadability of powders for additive manufacturing: a critical review of metrics and characterisation methods. Particuology, 93. pp. 211-234. ISSN 1674-2001 (doi:https://doi.org/10.1016/j.partic.2024.06.013)

Kaur, Baldeep ORCID: 0000-0002-1762-3058 and Bradley, Michael (2024) Moisture migration dynamics in speciality sugars. In: Sorption Symposium Europe 2024, 18th - 20th Sep., 2024, University of Vienna, Vienna, Austria. (Unpublished)

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael (2024) Effects of electrostatic charge on particle adhesion, cohesiveness and its influences on powder flow properties. In: 11th International Conference on Conveying and Handling of Particulate Solids, 2nd -4th Sep., 2024, Edinburgh. (Unpublished)

Sarnavi, Hamed J. and Bradley, Michael (2024) On the effect of powder cohesion on the location of Geldart Group A to Group C fluidisation boundaries. In: CHoPS 2024: 11th International Conference on Conveying and Handling of Particulate Solids, 2nd-4th of September, 2024, Edinburgh.

Bradley, Michael and Garg, Vivek ORCID: 0000-0002-8515-4759 (2024) On the convergent flow property behaviour of different fine dry powders across wide size ranges, and the concept of critical particle size. In: 11th International Conference on Conveying and Handling of Particulate Solids, 2nd -4th Sep., 2024, Edinburgh. (In Press)

Garg, Vivek ORCID: 0000-0002-8515-4759 , Deng, Tong ORCID: 0000-0003-4117-4317 and Bradley, Michael (2024) Effects of relative humidity and temperature on particle adhesion measurements using mechanical surface energy tester. In: 11th International Conference on Conveying and Handling of Particulate Solids, 2nd -4th Sep., 2024, Edinburgh. (In Press)

Garg, Vivek ORCID: 0000-0002-8515-4759 , Deng, Tong ORCID: 0000-0003-4117-4317 , Sousa, Lucas Massaro and Bradley, Michael (2024) Evaluation of segregation of pharmaceutical formulations in direct compression process. In: 11th International Conference on Conveying and Handling of Particulate Solids, 2nd -4th Sep., 2024, Edinburgh. (In Press)

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael (2024) Erosive wear of structured Carbon-fibre-reinforced textile polymer composites under sands blasting. Lubricants, 12 (3):94. pp. 1-13. ISSN 2075-4442 (Online) (doi:https://doi.org/10.3390/lubricants12030094)

Salehi Kahrizsangi, Hamid ORCID: 0000-0002-2516-6619 , Timmerfors, Jessica Gard, Hajmohammadi, Hajar, Garg, Vivek ORCID: 0000-0002-8515-4759 , Berry, Robert, Barletta, Diego, Poletto, Massimo, Jonsson, Leif J, Bradley, Michael and Larsson, Sylvia H. (2023) The role of particle size and other properties on silo discharge behaviour of chipped wood biomass. Powder Technology, 432:119174. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2023.119174)

Deng, Tong ORCID: 0000-0003-4117-4317 , Massaro Sousa, Lucas ORCID: 0000-0002-4182-9347 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael S.A. (2023) Segregation of formulated powders in direct compression process and evaluations by small bench-scale testers. International Journal of Pharmaceutics, 647:123544. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2023.123544)

Alshahed, Osamh Sabri Mohammed Atia, Kaur, Baldeep ORCID: 0000-0002-1762-3058 and Bradley, Michael (2023) Application of chaos analysis to electrostatic measurements of horizontal gas-solid flow in pneumatic conveying of plastic pellets. In: ICBMH 2023: 14th International Conference on Bulk Materials Storage, Handling and Transportation. Proceedings: Wollongong, NSW Australia, 11th - 13th July, 2023. ICBMH 2023 . Engineers Australia, Wollongong, New South Wales, Australia, pp. 455-463. ISBN 978-1925627831

Alshahed, Osamh Sabri Mohammed Atia, Kaur, Baldeep ORCID: 0000-0002-1762-3058 and Bradley, Michael (2023) Application of recurrence quantification analysis to electrostatic measurements of horizontal gas-solid flow in pneumatic conveying of plastic pellets. In: ICBMH 2023: 14th International Conference on Bulk Materials Storage, Handling and Transportation. Proceedings: Wollongong, NSW Australia, 11th - 13th July, 2023. ICBMH 2023 . Engineers Australia, Wollongong, New South Wales, Australia, pp. 413-424. ISBN 978-1925627831

Singh, Gulab, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael and Ellis, Richard (2023) Evaluation and calibration of wood pellets degradation using a rotary impact tester against single-bend attrition tester. In: ICBMH2023 14th International Conference on Bulk Materials Storage, Handling and Transportation. Proceedings. Wollongong, NSW, Australia, 11th - 13th July, 2023. Engineers Australia, University of Wollongong, New South Wales, Australia, pp. 309-320. ISBN 978‐1925627831

Farnish, Richard, Bradley, Michael and Garg, Vivek ORCID: 0000-0002-8515-4759 (2023) Investigations into optimal pulse cleaning of dust filter media. In: ICBMH 2023: 14th International Conference on Bulk Materials Storage, Handling and Transportation. Proceedings: Wollongong, NSW Australia, 11th - 13th July, 2023. ICBMH 2023 . Engineers Australia, Wollongong, New South Wales, Australia, pp. 154-160. ISBN 978‐1925627831

Alupathgala Kankanamalage, Chanaka Prasad, Kaur, Baldeep ORCID: 0000-0002-1762-3058 , Salehi Kahrizsangi, Hamid ORCID: 0000-0002-2516-6619 , Ellis, Richard and Bradley, Michael (2023) System identification and stability analysis of a pneumatic conveying pipeline based on blower input voltage and particle velocity: preliminary study. In: ICBMH 2023: 14th International Conference on Bulk Materials Storage, Handling and Transportation. Proceedings: Wollongong, NSW Australia, 11th - 13th July, 2023. ICBMH 2023 . Engineers Australia, Wollongong, New South Wales, Australia, pp. 436-444. ISBN 978-1925627831

Alshahed, Osamh Sabri Mohammed Atia, Kaur, Baldeep ORCID: 0000-0002-1762-3058 and Bradley, Michael (2023) Cross recurrence quantification analysis of gas-solid flow in pneumatic conveying of plastic pellets using electrostatic sensors. In: 9th UK-China International Particle Technology Forum / 18th Particle Technology Early Career Forum, 21st - 24th Aug 2023, Greenwich, London, UK. (Unpublished)

Salehi Kahrizsangi, Hamid ORCID: 0000-0002-2516-6619 , Cummins, John, Gallino, Enrico, Garg, Vivek ORCID: 0000-0002-8515-4759 , Deng, Tong ORCID: 0000-0003-4117-4317 , Hassanpour, Ali and Bradley, Michael (2023) Optimising spread-layer quality in powder additive manufacturing: assessing packing fraction and segregation tendency. Processes, 11 (8):2276. pp. 1-22. ISSN 2227-9717 (Online) (doi:https://doi.org/10.3390/pr11082276)

Alshahed, Osamh Sabri Mohammed Atia, Kaur, Baldeep ORCID: 0000-0002-1762-3058 , Bradley, Michael and Armour-Chelu, David (2023) Application of nonlinear dynamics analysis to gas-solid flow system in horizontal pneumatic conveying of plastic pellets. Powder Technology, 428:118837. pp. 1-16. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2023.118837)

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael (2023) Electrostatic charging of fine powders and assessment of charge polarity using an inductive charge sensor. Nanomanufacturing, 3 (3). pp. 281-292. ISSN 2673-687X (Online) (doi:https://doi.org/10.3390/nanomanufacturing3030018)

Bradley, Michael (2023) Structural failure of silos: learning lessons from failure. In: 14th International Conference on Bulk Materials Storage, Handling and Transportation, 11th - 13th July 2023, Wollongong, New South Wales, Australia. (Unpublished)

Hussain, Tariq, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael, Armour-Chelu, David, Pillai, John, Saadat, Salman and Kaialy, Waseem (2023) Noise reduction by using wavelet transform in charge signal acquired from an electrostatic inductive sensor. Measurement: Sensors, 27:100757. pp. 1-4. ISSN 2665-9174 (Online) (doi:https://doi.org/10.1016/j.measen.2023.100757)

Alshahed, Osamh Sabri Mohammed Atia, Kaur, Baldeep ORCID: 0000-0002-1762-3058 , Bradley, Michael and Okereke, Michael ORCID: 0000-0002-2104-012X (2023) Experimental and numerical study on gas-solid flow system of plastic pellets using recurrence quantification analysis of pressure sensor measurements. In: UKACM 2023 Conference (UK Association for Computational Mechanics), 19th - 21st April 2023, The University of Warwick, 19-21 April 2023. (Unpublished)

Singh, Gulab, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael and Ellis, Richard (2023) Advanced assessment of biomass materials degradation in pneumatic conveying systems: challenges and applications. Applied Sciences, 13:1960. pp. 1-13. ISSN 2076-3417 (Online) (doi:https://doi.org/10.3390/app13031960)

Dissanayake Mudiyanselage, Susantha ORCID: 0000-0002-0953-379X , Bradley, Michael, Zigan, Stefan, Salehi Kahrizsangi, Hamid ORCID: 0000-0002-2516-6619 and Deng, Tong ORCID: 0000-0003-4117-4317 (2023) Frequency domain analysis to identify main segregation contributors in a chain of material handling. In: ICBMH2023: 14th International Conference on Bulk Materials Storage, Handling and Transportation. ICBMH - The Institution of Engineers, Wollongong, NSW Australia, pp. 372-380. ISBN 978-1925627831

Vargis, Binu Kuriakose; Garg, Vivek et al. (Patent No: 345596-001) (2022) Modified design for toilet seat for urination and defecation. .

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Diaz, Laura Pereira, Markl, Daniel, Brown, Cameron, Florence, Alastair and Bradley, Michael S.A. (2022) Comparative studies of powder flow predictions using milligrams of powder for identifying powder flow issues. International Journal of Pharmaceutics, 628:122309. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2022.122309)

Sarnavi, Hamed J., Precoppe, Marcelo ORCID: 0000-0002-7937-5782 , Salehi, Hamid ORCID: 0000-0002-2516-6619 , Bradley, Michael S.A. and García-Triñanes, Pablo ORCID: 0000-0002-4993-2250 (2022) Study of the evolution of drying-induced flow properties for pulverised cassava grits. Journal of Food Engineering, 338:111221. ISSN 0260-8774 (doi:https://doi.org/10.1016/j.jfoodeng.2022.111221)

Sarnavi, Hamed J, Precoppe, Marcelo ORCID: 0000-0002-7937-5782 , García-Triñanes, Pablo ORCID: 0000-0002-4993-2250 , Chapuis, Arnaud, Tran, Thierry, Bradley, Michael SA and Müller, Joaquin (2022) Determining the heat of desorption for cassava products based on data measured by an automated gravimetric moisture sorption system. Journal of the Science of Food and Agriculture, 103 (1). pp. 389-399. ISSN 0022-5142 (Print), 1097-0010 (Online) (doi:https://doi.org/10.1002/jsfa.12153)

Salehi Kahrizsangi, Hamid ORCID: 0000-0002-2516-6619 , Cummins, John, Gallino, Enrico, Harrison, Neil, Hassanpour, Ali and Bradley, Michael (2022) A new approach to quantify powder's bed surface roughness in additive manufacturing. Powder Technology, 407:117614. pp. 1-13. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2022.117614)

114312 (2022) Medical suction pump controller - Certificate of Registration of Design No 360064-001. .

Garg, Vivek ORCID: 0000-0002-8515-4759 , Deng, Tong ORCID: 0000-0003-4117-4317 and Bradley, Michael (2021) A new method for assessing powder flowability based on physical properties and cohesiveness of particles using a small quantity of samples. Powder Technology. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.10.027)

Vivek Garg (2021) Computer implemented method for scanning for determining characteristics of materials using Artificial Intelligence. .

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael S.A. (2021) A study of particle adhesion for cohesive powders using a novel mechanical surface energy tester. Powder Technology, 391. pp. 46-56. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.06.002)

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Salehi, Hamid ORCID: 0000-0002-2516-6619 and Bradley, Michael S. A. (2021) Correlations between segregation intensity and material properties such as particle sizes and adhesions and novel methods for assessment. Powder Technology, 387. pp. 215-226. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.04.023)

Salehi Kahrizsangi, Hamid ORCID: 0000-0002-2516-6619 , Karde, Vikram, Hajmohammadi, Hajar, Dissanayake, Susantha, Larsson, Sylvia, Heng, Jerry and Bradley, Michael (2021) Understanding flow properties of mannitol powder at a range of temperature and humidity. International Journal of Pharmaceutics, 596:120244. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2021.120244)

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Salehi, Hamid ORCID: 0000-0002-2516-6619 and Bradley, Michael S. A. (2020) An experimental study on free-surface rolling segregation and correlations with angle of repose and particle sphericity. Powder Technology, 379. pp. 307-320. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2020.10.077)

Stutt, Richard O. J. H. ORCID: 0000-0002-1765-2633 , Retkute, Renata, Bradley, Michael, Gilligan, Christopher A. and Colvin, John (2020) A modelling framework to assess the likely effectiveness of facemasks in combination with ‘lock-down’ in managing the COVID-19 pandemic. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 476 (2238):20200376. ISSN 1364-5021 (Print), 1471-2946 (Online) (doi:https://doi.org/10.1098/rspa.2020.0376)

Wardle, J. P. and Bradley, M. S. A. (2019) Layer deposition quality and powder properties in metal additive manufacturing: a study exploring the use of a simple shadowgraphy technique to explore the effect of spreader rake configuration and powder grain size on limits of spreadability. UNSPECIFIED. Elsevier. (Submitted)

Salehi, Hamid ORCID: 0000-0002-2516-6619 , Berry, Robert, Farnish, Richard and Bradley, Mike (2019) Temperature and time consolidation effect on the bulk flow properties and arching tendency of a detergent powder. Chemical Engineering & Technology, 43 (1). pp. 150-156. ISSN 0930-7516 (Print), 1521-4125 (Online) (doi:https://doi.org/10.1002/ceat.201900092)

Salehi, Hamid, Berry, Robert, Farnish, Richard and Bradley, Mike (2019) A new uniaxial compression tester: development and application. Chemical Engineering Transactions, 74. pp. 463-468. ISSN 2283-9216 (doi:https://doi.org/10.3303/CET1974078)

Bradley, Mike and Wardle, J. P. (2019) Powder Flow in the AM Process: Understanding its impact and potential problems. In: IDTechEX, 10-11 April 2019, Estrel Convention Center, Berlin, Germany. (Unpublished)

Salehi, Hamid ORCID: 0000-0002-2516-6619 , Berry, Robert, Deng, Tong ORCID: 0000-0003-4117-4317 , Larsson, Sylvia H., Farnish, Richard and Bradley, Mike (2019) Development and application of a novel cake strength tester. Powder Technology, 350. pp. 36-42. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2019.03.024)

Deng, Tong ORCID: 0000-0003-4117-4317 , Alzahrani, Abdullah M. and Bradley, Michael S. (2018) Influences of environmental humidity on physical properties and attrition of wood pellets. Fuel Processing Technology, 185. pp. 126-138. ISSN 0378-3820 (doi:https://doi.org/10.1016/j.fuproc.2018.12.010)

Kotzur, Benjamin A., Berry, Robert J., Zigan, Stefan, García-Triñanes, Pablo ORCID: 0000-0002-4993-2250 and Bradley, Michael S. A. (2018) Particle Attrition Mechanisms, their characterisation, and application to horizontal lean phase pneumatic conveying systems: A review. Powder Technology, 334. pp. 76-105. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2018.04.047)

Michael Bradley (2017) Apparatus comprising a microwave processing chamber. http://www.freepatentsonline.com/y2019/0127645.html.

The University Of Greenwich (2017) STENT WO 2016116748 A1. WO 2016116748 A1.

Kotzur, Benjamin A., Bradley, Michael S.A., Berry, Robert J. and Farnish, Richard J. (2016) Breakage characteristics of granulated food products for prediction of attrition during lean-phase pneumatic conveying. International Journal of Food Engineering, 12 (9). ISSN 1556-3758 (Print), 2194-5764 (Online) (doi:https://doi.org/10.1515/ijfe-2016-0045)

Deng, Tong ORCID: 0000-0003-4117-4317 and Bradley, Michael (2016) Determination of a particle size distribution criterion for predicting dense phase pneumatic conveying behaviour of granular and powder materials. Powder Technology, 304. pp. 32-40. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2016.05.001)

Hussain, Tariq, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael Samuel, Armour-Chélu, David, Gorman, Terry and Kaialy, Waseem (2016) Evaluation studies of a sensing technique for electrostatic charge polarity of pharmaceutical particulates. IET Science Measurement and Technology, 10 (5). pp. 442-448. ISSN 1751-8822 (Print), 1751-8830 (Online) (doi:https://doi.org/10.1049/iet-smt.2015.0194)

Maniruzzaman, Mohammed, Snowden, Martin ORCID: 0000-0002-1087-2692 , Bradley, Michael and Douroumis, Dionysios ORCID: 0000-0002-3782-0091 (2015) Correction: Studies of intermolecular interactions in solid dispersions using advanced surface chemical analysis. RSC Advances, 5 (103). p. 84936. ISSN 2046-2069 (Online) (doi:https://doi.org/10.1039/c5ra90091c)

Maniruzzaman, M., Nair, A., Scoutaris, N., Bradley, Michael S.A., Snowden, M.J. ORCID: 0000-0002-1087-2692 and Douroumis, D. ORCID: 0000-0002-3782-0091 (2015) One-step continuous extrusion process for the manufacturing of solid dispersions. International Journal of Pharmaceutics Special Issue on "Continuous Manufacturing and Process Analytical Tools”, 496 (1). pp. 42-51. ISSN 0378-5173 (Print), 1873-3476 (Online) (doi:https://doi.org/10.1016/j.ijpharm.2015.09.048)

Maniruzzaman, Mohammed, Nair, Arun, Renault, Maxcene, Nandi, Uttom ORCID: 0000-0003-1777-3862 , Scoutaris, Nicholaos, Farnish, Richard, Bradley, Mike, Snowden, Martin J. ORCID: 0000-0002-1087-2692 and Douroumis, Dennis ORCID: 0000-0002-3782-0091 (2015) Continuous twin-screw granulation for enhancing the dissolution of poorly water soluble drug. International Journal of Pharmaceutics Special Issue on "Continuous Manufacturing and Process Analytical Tools”, 496 (1). ISSN 0378-5173 (Print), 1873-3476 (Online) (doi:https://doi.org/10.1016/j.ijpharm.2015.09.025)

Islam, Muhammad T., Scoutaris, Nikolaos, Maniruzzaman, Mohammed, Moradiya, Hiren G., Halsey, Sheelagh, Bradley, Michael, Chowdhry, Babur, Snowden, Martin ORCID: 0000-0002-1087-2692 and Douroumis, Dennis ORCID: 0000-0002-3782-0091 (2015) Implementation of transmission NIR as a PAT tool for monitoring drug transformation during HME processing. European Journal of Pharmaceutics and Biopharmaceutics, 96. pp. 106-116. ISSN 0939-6411 (Print), 1873-3441 (Online) (doi:https://doi.org/10.1016/j.ejpb.2015.06.021)

Maniruzzaman, Mohammed, Snowden, Martin ORCID: 0000-0002-1087-2692 , Bradley, Michael and Douroumis, Dionysios ORCID: 0000-0002-3782-0091 (2015) Studies of intermolecular interactions in solid dispersions using advanced surface chemical analysis. RSC Advances: An international journal to further the chemical sciences, 5 (91). pp. 74212-74219. ISSN 2046-2069 (Online) (doi:https://doi.org/10.1039/C5RA13176F)

Lakshman, Biju, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A., Okereke, Michael ORCID: 0000-0002-2104-012X and McIlhagger, A. T. (2014) Erosive wear of polymer composite materials and its correlation with high strain rate mechanical properties. In: 2nd International Conference on Abrasive Processes - ICAP 2014 (Programme and Abstract Book). ICAP, Cambridge, United Kingdom, p. 24.

Chen, Jinhu, Trevarthen, James A., Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S.A., Rahatekar, Sameer S. and Koziol, Krzysztof K.K. (2014) Aligned carbon nanotube reinforced high performance polymer composites with low erosive wear. Composites Part A: Applied Science and Manufacturing, 67. pp. 86-95. ISSN 1359-835X (doi:https://doi.org/10.1016/j.compositesa.2014.08.009)

Berry, R.J., Bradley, M.S.A. and McGregor, R.G. (2014) Brookfield powder flow tester - Results of round robin tests with CRM-116 limestone powder. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 229 (3). pp. 215-230. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:https://doi.org/10.1177/0954408914525387)

Chen, Jinhu, Hutchings, Ian M., Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A. and Koziol, Krzysztof K. K. (2014) The effect of carbon nanotube orientation on erosive wear resistance of CNT-epoxy based composites. Carbon, 73. pp. 421-431. ISSN 0008-6223 (doi:https://doi.org/10.1016/j.carbon.2014.02.083)

Macchini, R., Bradley, M.S.A. and Deng, T. ORCID: 0000-0003-4117-4317 (2013) Influence of particle size, density, particle concentration on bend erosive wear in pneumatic conveyors. Wear, 303 (1-2). pp. 21-29. ISSN 0043-1648 (doi:https://doi.org/10.1016/j.wear.2013.02.014)

Hussain, Tariq, Kaialy, Waseem, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Mike S.A., Nokhodchi, Ali and Armour-Chélu, David (2012) Measurement of electrostatic charge on particles using a novel approach. International Journal of Pharmaceutics, 441 (1-2). pp. 781-789. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2012.10.002)

Hussain, Tariq, Kaialy, Waseem, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Mike S.A., Nokhodchi, Ali and Armour-Chélu, David (2012) A novel sensing technique for measurement of magnitude and polarity of electrostatic charge distribution across individual particles. International Journal of Pharmaceutics, 441 (1-2). pp. 781-789. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2012.10.002)

Bradley, M., Farnish, R. and Deng, T. ORCID: 0000-0003-4117-4317 (2012) Predicting and preventing wear in pipe bends: Basic information for choosing a cost-effective wear protection solution. Bulk Solids Handling, 32 (4). pp. 26-31. ISSN 0173-9980

Deng, T. ORCID: 0000-0003-4117-4317 , Su, J.W., Zhang, Y., Bradley, M.S.A. and Wei, X.L. (2011) Making coal/biomass pellets for co-firing - a review and pioneer work. In: Proceedings of the Bioten Conference on Biomass Bioenergy and Biofuels 2010. CPL Press, Newbury, UK. ISBN 9781872691541

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2011) Testing of powders for sensitivity to air effect segregation. Powder Metallurgy, 54 (4). pp. 468-470. ISSN 0032-5899 (Print), 1743-2901 (Online) (doi:https://doi.org/10.1179/174329011X13073642060730)

Bradley, Michael, Berry, Robert and Farnish, Richard (2011) Methods for design of hoppers. Silos, bins and bunkers for reliable gravity flow, for pharmaceutical, food, mineral and other applications. In: BulkSolids India 2011, 6-8 April 2011, Mumbai, India. (Unpublished)

Bradley, Michael, Farnish, Richard and Deng, Tong ORCID: 0000-0003-4117-4317 (2011) Predicting and preventing wear in pneumatic conveying systems. In: BulkSolids India 2011, 6-8 April 2011, Mumbai, India. (Unpublished)

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2011) Centrifugal tester versus a novel design to measure particle adhesion strength and investigation of effect of physical characteristics (size, shape, density) of food particles on food surfaces. Journal of Food Engineering, 104 (4). pp. 518-524. ISSN 0260-8774 (doi:https://doi.org/10.1016/j.jfoodeng.2011.01.008)

Ariza-Zafra, K., Berry, R., Bradley, M.S.A. and Santana, J.C. (2010) Achieving mass flow in silos with shallow converging sections using inverted cones. Bulk Solids Handling (Whitepaper). ISSN 0173-9980

Owonikoko, A., Berry, R.J. and Bradley, M.S.A. (2010) Characterisation of extreme shape materials: “biomass and waste materials”. In: Bulk Solids Europe 2010 Conference and IMechE Symposium in New Frontiers in Bulk Materials Handling, 9-10 September 2010, Glasgow. (Unpublished)

Berry, R. J. and Bradley, M. S. A. (2010) Development of the Brookfield Powder Flow Tester. In: Bulk Solids Europe 2010 Conference and IMechE Symposium in New Frontiers in Bulk Materials Handling, 9-10 September 2010, Glasgow. (Unpublished)

Kulkarni, P.A., Berry, R.J. and Bradley, M.S.A. (2010) Review of the flowability measuring techniques for powder metallurgy industry. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 224 (3). pp. 159-168. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:https://doi.org/10.1243/09544089JPME299)

Deng, Tong ORCID: 0000-0003-4117-4317 , Paul, Kirsty A., Bradley, Michael S.A., Immins, Lee, Preston, Chris, Scott, Jerry F. and Welfare, Eloise H. (2010) Investigations on air induced segregation of pharmaceutical powders and effect of material flow functions. Powder Technology, 203 (2). pp. 354-358. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2010.05.028)

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2010) Testing of powders for sensitivity to air effect segregation. In: Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Florence, pp. 53-60. ISBN 978-189907219-4

Angulo Pinzon, O.A., Berry, R.J., Bradley, M.S and Antonijevic, M.D. ORCID: 0000-0002-5847-7886 (2009) Modelling of dosator operation for improved manufacturing performance. In: 2009 AAPS Annual Meeting and Exposition, 8-12 Nov 2009, Los Angeles, USA.

Robinson, J.P., Kingman, S.W., Snape, C.E., Barranco, R., Shang, H., Bradley, M.S.A. and Bradshaw, S.M. (2009) Remediation of oil-contaminated drill cuttings using continuous microwave heating. Chemical Engineering Journal, 152 (2-3). pp. 458-463. ISSN 1385-8947 (doi:https://doi.org/10.1016/j.cej.2009.05.008)

Deng, Tong ORCID: 0000-0003-4117-4317 , Bingley, Mark S. and Bradley, Mike S.A. (2009) Understanding particle dynamics in erosion testers: a review of influences of particle movement on erosion test conditions. Wear, 267 (11). pp. 2132-2140. ISSN 0043-1648 (doi:https://doi.org/10.1016/j.wear.2009.02.020)

Robinson, John, Kingman, Sam, Snape, Colin E., Bradley, Mike, Bradshaw, Steven, Thomas, Dominic J.M. and Page, Paul W. (2009) Microwave treatment of oil-contaminated drill cuttings at pilot scale. SPE Drilling and Completion, 24 (3). pp. 430-435. ISSN 1064-6671 (Print), 1930-0204 (Online) (doi:https://doi.org/10.2118/111637-PA)

Angulo, O., Berry, R., Bradley, M. and Antonijevic, M. ORCID: 0000-0002-5847-7886 (2009) Modelling of a dosator: an analytical approach based on measured powder flow properties. Journal of Pharmacy and Pharmacology, 61 (S1). A123-A123. ISSN 0022-3573 (Print), 2042-7158 (Online) (doi:https://doi.org/10.1211/002235709789037053)

Robinson, J.P., Kingman, S.W., Snape, C.E., Bradshaw, S.M., Bradley, M.S.A., Shang, H. and Barranco, R. (2009) Scale-up and design of a continuous microwave treatment system for the processing of oil-contaminated drill cuttings. Chemical Engineering Research and Design, 88 (2). pp. 146-154. ISSN 0263-8762 (doi:https://doi.org/10.1016/j.cherd.2009.07.011)

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2009) Direct measurement of powder flavor adhesion onto crisp surface using a novel adhesion tester. Particulate Science and Technology, 27 (4). pp. 362-372. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:https://doi.org/10.1080/02726350902994035)

Angulo Pinzon, O.A., Berry, R.J., Bradley, M.S., Farnish, R.J. and Antonijevic, M.D. ORCID: 0000-0002-5847-7886 (2009) The impact of powder flowing properties on dosator filling system operation. In: 2009 AAPS Annual Meeting and Exposition, 8-12 Nov 2009, Los Angeles, USA.

Deng, Tong ORCID: 0000-0003-4117-4317 , Farnish, Richard J. and Bradley, Michael S.A. (2008) Evaluation of particle degradation due to high-speed impacts in a pneumatic handling system. Particulate Science and Technology, 26 (5). pp. 438-450. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:https://doi.org/10.1080/02726350802367522)

Deng, T. ORCID: 0000-0003-4117-4317 , Bingley, M.S., Bradley, M.S.A. and De Silva, S.R. (2008) A comparison of the gas-blast and centrifugal-accelerator erosion testers: The influence of particle dynamics. Wear, 265 (7-8). pp. 945-955. ISSN 0043-1648 (doi:https://doi.org/10.1016/j.wear.2008.02.017)

Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A., Berry, Rob and Kostuch, J. (2008) Caking strength of granulated clay under frozen conditions. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 604-609. ISBN 9788272062896

Farnish, R.J., Berry, R. and Bradley, M. (2008) Development of a novel - filling technique loading bulk particulate materials into tankers or processes. Bulk Solids Handling, 28 (4). pp. 238-241. ISSN 0173-9980

Ermis, Ertan, Farnish, Richard J., Berry, Rob and Bradley, Michael S. A. (2008) Direct measurement of powder flavour adhesion on to a food surface using a novel adhesion tester. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 803-810. ISBN 9788272062896

Berry, Rob, Bradley, Michael S.A., Farnish, Richard J. and Angulo Pinzon, O.A. (2008) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 344-350. ISBN 9788272062896

Angulo Pinzon, O.A., Bradley, Michael, Berry, Robert and Farnish, Richard J. (2008) Modelling dosator filling and discharge of powder. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 586-591. ISBN 9788272062896

Ariza-Zafra, K., Berry, Robert and Bradley, Michael S. A. (2008) Review of models for predicting the discharge rates of bulk particulates from silos and bins. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 484-492. ISBN 9788272062896

Farnish, Richard J., Kulkarni, Prasanna and Bradley, Michael S. A. (2008) Segregation of bulk particulates through multiple process handling steps. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 505-510. ISBN 9788272062896

Bradley, M. S. A., Reed, A. R., Berry, R. and Holmes, C.P.M. (2008) Start-up and running forces on bulk solids feeders: experimental findings versus available models. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 450-457. ISBN 9788272062896

Berry, Rob, Bradley, Michael S. A., Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction test procedure, suitable for equipment design and powder characterisation. In: ICBMH Conference: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, Australia. (Unpublished)

Bradley, Michael S.A., Berry, Rob and Pillai, John (2007) Comparison between the angles of wall friction measured on an on-line wall friction tester and the Jenike wall friction tester. Powder Technology, 174 (1-2). pp. 64-70. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2006.10.024)

Bradley, M. S. A. and Berry, R. (2007) Investigation of the effect of test procedure factors on the failure loci and derived failure functions obtained from annular shear cells. Powder Technology, 174 (1-2). pp. 60-63. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2006.10.023)

Bradley, Michael S.A., Berry, Rob, Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction tester and test procedure, suitable for equipment design and powder characterisation. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)

Bradley, Michael S. A., Berry, Rob, Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia. (Unpublished)

Bradley, Michael S.A., Farnish, Richard J., Reed, Alan R. and Kulkarni, Prasanna (2007) Evaluation of air induced segregation tendencies in pharmaceutical blends using a bench scale tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)

Deng, T. ORCID: 0000-0003-4117-4317 , Farnish, R.J. and Bradley, M.S.A. (2007) Pressure drop in dense phase conveying. Bulk Solids Handling, 27 (5). pp. 296-301. ISSN 0173-9980

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2006) Predicting segregation of metal powders. Powder Metallurgy, 49 (3). pp. 206-208. ISSN 0032-5899 (Print), 1743-2901 (Online) (doi:https://doi.org/10.1179/174329006X152442)

Christakis, N., Wang, J., Patel, M.K., Bradley, M.S.A., Leaper, M.C. and Cross, M. (2006) Aggregation and caking processes of granular materials: continuum model and numerical simulation with application to sugar. Advanced Powder Technology, 17 (5). pp. 543-565. ISSN 0921-8831 (doi:https://doi.org/10.1163/156855206778440480)

Christakis, Nicholas, Chapelle, Pierre, Strusevich, Nadezhda, Bridle, Ian, Baxter, John, Patel, Mayur K., Cross, Mark, Tüzün, Ugur, Reed, Alan R. and Bradley, Michael S. A. (2006) A hybrid numerical model for predicting segregation during core flow discharge. Advanced Powder Technology, 17 (6). pp. 641-662. ISSN 0921-8831 (doi:https://doi.org/10.1163/156855206778917715)

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2005) Segregation of metal powders. In: Euro PM 2005: Powder Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA), Prague, Czech Republic, pp. 61-66. ISBN 9781899072187

Deng, T. ORCID: 0000-0003-4117-4317 , Chaudhry, A.R., Patel, M., Hutchings, I. and Bradley, M.S.A. (2004) Effect of particle concentration on erosion rate of mild steel bends in a pneumatic conveyor. Wear, 258 (1-4). pp. 480-487. ISSN 0043-1648 (doi:https://doi.org/10.1016/j.wear.2004.08.001)

Bradley, Michael, Bingley, Mark and Mengistu, Samuel (2004) Frictional characteristics of steel plates during abrasive particle flow: A comparison of in situ measurements made on a linear abrasive wear tester with those on a Jenike shear tester Jenike shear tester. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 218 (4). pp. 221-235. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:https://doi.org/10.1243/0954408042466963)

Deng, T. ORCID: 0000-0003-4117-4317 , Li, J., Chaudhry, A.R., Patel, M., Hutchings, I. and Bradley, M.S.A. (2004) Comparison between weight loss of bends in a pneumatic conveyor and erosion rate obtained in a centrifugal erosion tester for the same materials. Wear, 258 (1-4). pp. 402-411. ISSN 0043-1648 (doi:https://doi.org/10.1016/j.wear.2004.02.012)

Deng, T. ORCID: 0000-0003-4117-4317 , Patel, M., Hutchings, I. and Bradley, M.S.A. (2004) Effect of bend orientation on life and puncture point location due to solid particle erosion of a high concentration flow in pneumatic conveyors. Wear, 258 (1-4). pp. 426-433. ISSN 0043-1648 (doi:https://doi.org/10.1016/j.wear.2004.02.010)

Abou-Chakra, Hadi, Baxter, John, Tuzun, Ugur, Chapelle, Pierre, Patel, Mayur, Bridle, Ian, Bradley, Michael S.A. and Reed, Alan R. (2004) Degradation toolkit for predicting the amount of degradation of particulate solids in lean phase pneumatic conveyors. In: International Conference for Particle Technology (PARTEC 2004), 16-18 March 2004, Nuremberg, Germany. (Unpublished)

Chapelle, Pierre, Christakis, Nicholas, Abou-Chakra, Hadi, Bridle, Ian, Bradley, M.S.A., Patel, Mayur and Cross, Mark (2004) Computational model for prediction of particle degradation during dilute-phase pneumatic conveying: modeling of dilute-phase pneumatic conveying. Advanced Powder Technology, 15 (1). pp. 31-49. ISSN 0921-8831 (Print), 1568-5527 (Online) (doi:https://doi.org/10.1163/15685520460740052)

Deng, Tong ORCID: 0000-0003-4117-4317 , Bingley, Mark S. and Bradley, Michael S. A. (2004) The influence of particle rotation on the solid particle erosion rate of metals. Wear, 256 (11-12). pp. 1037-1049. ISSN 0043-1648 (doi:https://doi.org/10.1016/S0043-1648(03)00536-2)

Abou-Chakra, H., Tüzün, Ugur, Bridle, Ian, Leaper, M.C., Bradley, Michael and Reed, Alan (2003) Assessing the potential of a fine powder to segregate using laser diffraction and sieve particle size measuring techniques. Advanced Powder Technology, 14 (2). pp. 167-176. ISSN 0921-8831 (doi:https://doi.org/10.1163/156855203763593967)

Chapelle, P., Christakis, N., Abou-Chakra, H., Tuzun, U., Bridle, I., Bradley, M.S.A., Patel, M.K. and Cross, M. (2003) Computational modelling of particle degradation in dilute phase pneumatic conveyors. In: Kumar, Vipin, Gavrilova, Marina L., Tan, Chih Jeng Kenneth and L’Ecuyer, Pierre, (eds.) Computational Science and Its Applications - ICCSA 2003. International Conference Montreal, Canada, May 18–21, 2003 Proceedings. Lecture Notes in Computer Science, Part I (2667). Springer, Berlin Heidelberg, pp. 493-502. ISBN 9783540401551 (doi:https://doi.org/10.1007/3-540-44839-X_53)

Hanson, R., Allsopp, D., Deng, T. ORCID: 0000-0003-4117-4317 , Smith, D., Bradley, M.S.A., Hutchings, I.M. and Patel, M.K. (2002) A model to predict the life of pneumatic conveyor bends. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 216 (3). pp. 143-149. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:https://doi.org/10.1243/095440802320225284)

Leaper, M.C., Bradley, Michael S.A., Cleaver, J.A.S., Bridle, Ian, Reed, Alan R., Abou-Chakra, H. and Tüzün, Ugur (2002) Constructing an engineering model for moisture migration in bulk solids as a prelude to predicting moisture migration caking. Advanced Powder Technology, 13 (4). pp. 411-424. (doi:https://doi.org/10.1163/156855202320536043)

Salter, G.F., Farnish, R.J., Bradley, M.S.A. and Burnett, A.J. (2000) Segregation of binary mixtures of particles during the filling of a two-dimensional representation of a hopper. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 214 (3). pp. 197-208. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:https://doi.org/10.1243/0954408001530056)

Burnett, A.J., Bradley, M.S.A., O'Flynn, D.J., Deng, T. ORCID: 0000-0003-4117-4317 and Bingley, M. (1999) Anomalies in the results obtained from rotating disc accelerator erosion testers: a discussion of possible causes. Wear, 233-5. pp. 275-283. ISSN 0043-1648 (doi:https://doi.org/10.1016/s0043-1648(99)00227-6)

Bradley, M. S. A., Burnett, A. J. and Woodhead, S. R. (1995) Measurement of pressure profiles in pneumatic conveying pipelines. Instrumentation and Measurement Technology Conference, 1995. IMTC/95. Proceedings. Integrating Intelligent Instrumentation and Control., IEEE. Institute of Electrical and Electronics Engineers, New York, pp. 766-769. ISBN 978-0780326156 (doi:https://doi.org/10.1109/IMTC.1995.515419)

Schuster, T., Bradley, M.S.A. and Reed, Alan R. (1995) The dependence of power consumption of pneumatic conveying systems upon bulk material properties, pipeline bore and routing, and mode of flow. Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering, 209 (E1). pp. 69-75. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:https://doi.org/10.1243/PIME_PROC_1995_209_230_02)

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.