Article

Christakis, Nicholas, Chapelle, Pierre, Strusevich, Nadezhda, Bridle, Ian, Baxter, John, Patel, Mayur K., Cross, Mark, Tüzün, Ugur, Reed, Alan R. and Bradley, Michael S. A. (2006) A hybrid numerical model for predicting segregation during core flow discharge. Advanced Powder Technology, 17 (6). pp. 641-662. ISSN 0921-8831 (doi:10.1163/156855206778917715)

Abou-Chakra, H., Tüzün, Ugur, Bridle, Ian, Leaper, M.C., Bradley, Michael and Reed, Alan (2003) Assessing the potential of a fine powder to segregate using laser diffraction and sieve particle size measuring techniques. Advanced Powder Technology, 14 (2). pp. 167-176. ISSN 0921-8831 (doi:10.1163/156855203763593967)

Leaper, M.C., Bradley, Michael S.A., Cleaver, J.A.S., Bridle, Ian, Reed, Alan R., Abou-Chakra, H. and Tüzün, Ugur (2002) Constructing an engineering model for moisture migration in bulk solids as a prelude to predicting moisture migration caking. Advanced Powder Technology, 13 (4). pp. 411-424. (doi:10.1163/156855202320536043)

Burnett, A. J., De Silva, S. R. and Reed, A. R. (1995) Comparisons between "sand blast" and "centripetal effect accelerator" type erosion testers. Wear, 186-87 (PART 1). pp. 168-178. ISSN 0043-1648 (doi:10.1016/0043-1648(95)07143-1)

Burnett, A.J., Desilva, S.R. and Reed, Alan R. (1995) Comparisons between “sand blast” and “centripetal effect accelerator” type erosion testers. Wear, 186-18 (1). pp. 168-178. ISSN 0043-1648 (doi:10.1016/0043-1648(95)07143-1)

Schuster, T., Bradley, M.S.A. and Reed, Alan R. (1995) The dependence of power consumption of pneumatic conveying systems upon bulk material properties, pipeline bore and routing, and mode of flow. Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering, 209 (E1). pp. 69-75. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/PIME_PROC_1995_209_230_02)

Book Section

Bradley, M. S. A., Reed, A. R., Berry, R. and Holmes, C.P.M. (2008) Start-up and running forces on bulk solids feeders: experimental findings versus available models. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 450-457. ISBN 9788272062896

Conference or Conference Paper

Berry, Rob, Bradley, Michael S. A., Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction test procedure, suitable for equipment design and powder characterisation. In: ICBMH Conference: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, Australia. (Unpublished)

Bradley, Michael S.A., Berry, Rob, Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction tester and test procedure, suitable for equipment design and powder characterisation. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)

Bradley, Michael S.A., Farnish, Richard J., Reed, Alan R. and Kulkarni, Prasanna (2007) Evaluation of air induced segregation tendencies in pharmaceutical blends using a bench scale tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)

Abou-Chakra, Hadi, Baxter, John, Tuzun, Ugur, Chapelle, Pierre, Patel, Mayur, Bridle, Ian, Bradley, Michael S.A. and Reed, Alan R. (2004) Degradation toolkit for predicting the amount of degradation of particulate solids in lean phase pneumatic conveyors. In: International Conference for Particle Technology (PARTEC 2004), 16-18 March 2004, Nuremberg, Germany. (Unpublished)