3D printing; selective laser sintering; personalised medicines; oral; carvedilol

Ghanizadeh Tabriz, Atabak, Gonot-Munck, Quentin, Baudoux, Arnaud, Garg, Vivek ORCID: 0000-0002-8515-4759 , Farnish, Richard, L.Katsamenis, Orestis, Hui, Ho-Wah, Boersen, Nathan, Roberts, Sandra, Jones, John and Douroumis, Dionysios ORCID: 0000-0002-3782-0091 (2023) 3D printing of personalised Carvedilol tablets using selective laser sintering. Pharmaceutics, 15 (9):2230. pp. 1-19. ISSN 1999-4923 (Online) (doi:https://doi.org/10.3390/pharmaceutics15092230)

Air injection; Bulk solids; Aerated discharge; Experimental test; Permeability

Bianchini, A., Farnish, R.J., Gambuti, M. and Saccani, C. (2016) Predictive model for corn flour discharge rates through an aerated hopper. Powder Technology, 298. pp. 84-89. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2016.05.009)

Arching, Brookfield Powder Flow Tester, Jenike Method, Silo Design, Time Consolidation Flow Function

Salehi, Hamid ORCID: 0000-0002-2516-6619 , Berry, Robert, Farnish, Richard and Bradley, Mike (2019) Temperature and time consolidation effect on the bulk flow properties and arching tendency of a detergent powder. Chemical Engineering & Technology, 43 (1). pp. 150-156. ISSN 0930-7516 (Print), 1521-4125 (Online) (doi:https://doi.org/10.1002/ceat.201900092)

Equipment testing; Industrial applications; Materials handling; Mechanical properties; Powder metallurgy; Powder metals, Air Effect; Industrial activities; Measurements of; Optimisations; Segregation potential; Sintered products; Test apparatus; Test equipments, Segregation (metallography)

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2010) Testing of powders for sensitivity to air effect segregation. In: Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Florence, pp. 53-60. ISBN 978-189907219-4

Granular flow, Discharge rate, Bulk solids, Ventilation.

Ribeiro, Kandice Suane Barros, Farnish, Richard J. and Coelho, Reginaldo Teixeira (2019) Evaluation of the Restricted Air Entry on the Discharge Rate from Silos. In: 25th ABCM International Congress of Mechanical Engineering, 20-25 October 2019, Uberlandia, MG, Brazil.

Granulations; DoE; QbD; Dissolutions; Twin screw; Raman; DVS

Maniruzzaman, Mohammed, Nair, Arun, Renault, Maxcene, Nandi, Uttom ORCID: 0000-0003-1777-3862 , Scoutaris, Nicholaos, Farnish, Richard, Bradley, Mike, Snowden, Martin J. ORCID: 0000-0002-1087-2692 and Douroumis, Dennis ORCID: 0000-0002-3782-0091 (2015) Continuous twin-screw granulation for enhancing the dissolution of poorly water soluble drug. International Journal of Pharmaceutics Special Issue on "Continuous Manufacturing and Process Analytical Tools”, 496 (1). ISSN 0378-5173 (Print), 1873-3476 (Online) (doi:https://doi.org/10.1016/j.ijpharm.2015.09.025)

Networked Control Systems, Wireless Sensor Networks, AEAD constructs.

Sparrow, R. D., Adekunle, Andrew, Berry, Robert and Farnish, Richard (2015) Study of two security constructs on throughput for wireless sensor multi-hop networks. In: 38th International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO), 2015, 25-29th May, Opatija. (doi:https://doi.org/10.1109/MIPRO.2015.7160476)

Particle attrition, Lean-phase, Pneumatic conveying

Kotzur, Benjamin A., Bradley, Michael S.A., Berry, Robert J. and Farnish, Richard J. (2016) Breakage characteristics of granulated food products for prediction of attrition during lean-phase pneumatic conveying. International Journal of Food Engineering, 12 (9). ISSN 1556-3758 (Print), 2194-5764 (Online) (doi:https://doi.org/10.1515/ijfe-2016-0045)

Sustainable energies, Biomass, Mixing, Segregation

Ton, Bram T., Farnish, Richard J. and Zigan, Stefan (2015) Resolving lateral segregation effects of static blenders. In: IV International Conference on Particle-Based Methods (PARTICLES 2015). International Centre for Numerical Methods in Engineering (CIMNE), Barcelona, Spain, pp. 714-721. ISBN 978-8494424472

adhesion strength, particle adhesion, centrifugal force, food powders

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2011) Centrifugal tester versus a novel design to measure particle adhesion strength and investigation of effect of physical characteristics (size, shape, density) of food particles on food surfaces. Journal of Food Engineering, 104 (4). pp. 518-524. ISSN 0260-8774 (doi:https://doi.org/10.1016/j.jfoodeng.2011.01.008)

adhesion, bio-powder, crisp coating, flavoring powder

Ermis, E., Farnish, R.J., Berry, R.J. and Bradley, M.S.A. (2009) Direct measurement of powder flavor adhesion onto crisp surface using a novel adhesion tester. Particulate Science and Technology, 27 (4). pp. 362-372. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:https://doi.org/10.1080/02726350902994035)

adhesion, crisps, flavouring powder, coating, bio-powder,

Ermis, Ertan, Farnish, Richard J., Berry, Rob and Bradley, Michael S. A. (2008) Direct measurement of powder flavour adhesion on to a food surface using a novel adhesion tester. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 803-810. ISBN 9788272062896

air filters, dust filtration

Farnish, Richard, Beladi, Abdelhafid and Zigan, Stefan (2019) Investigation into the effects of cyclic particle loading onto filter media. In: ICBMH 2019. University of Newcastle, Australia.

air filters, reverse jet cleaning, dust capture

Farnish, Richard, Belaidi, Hafid and Zigan, Stefan (2019) The effects of reverse jet pulse over-pressurisation on dust filter performance. In: ICBMH 2019. University of Newcastle, Australia.

air velocities, cost-effective protection, dense phase, direct functions, in-pipe, latest technology, particle velocities, pipe bend, pipe walls, pipeline wear, shape and size, wear protection, air, cost effectiveness, mechanical properties, pipeline bends, pipe joints

Bradley, M., Farnish, R. and Deng, T. ORCID: 0000-0003-4117-4317 (2012) Predicting and preventing wear in pipe bends: Basic information for choosing a cost-effective wear protection solution. Bulk Solids Handling, 32 (4). pp. 26-31. ISSN 0173-9980

annular wall friction tester, bulk solids handling

Bradley, Michael S.A., Berry, Rob, Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction tester and test procedure, suitable for equipment design and powder characterisation. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)

binary mixtures, feedback control, feeding, filling, particle size analysis, particles, particulate matter, probes, test facilities, velocity, vibration control, particulate materials, segregation process, thieving probes, flow pattern, solid-solid separation,

Salter, G.F., Farnish, R.J., Bradley, M.S.A. and Burnett, A.J. (2000) Segregation of binary mixtures of particles during the filling of a two-dimensional representation of a hopper. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 214 (3). pp. 197-208. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:https://doi.org/10.1243/0954408001530056)

biomass; dilation; handling; advanced adaptive system; modelling; characterisation

Ilic, Dusan, Williams, Kenneth, Farnish, Richard, Webb, Erin and Liu, Gary (2018) On the challenges facing the handling of solid biomass feedstocks. Biofuels, Bioproducts and Biorefining, 12 (2). pp. 187-202. ISSN 1932-104X (Print), 1932-1031 (Online) (doi:https://doi.org/10.1002/bbb.1851)

breakage matrices, high-speed impacts, particle degradation, pneumatic conveyors

Deng, Tong ORCID: 0000-0003-4117-4317 , Farnish, Richard J. and Bradley, Michael S.A. (2008) Evaluation of particle degradation due to high-speed impacts in a pneumatic handling system. Particulate Science and Technology, 26 (5). pp. 438-450. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:https://doi.org/10.1080/02726350802367522)

bulk particulates, segregation

Farnish, Richard J., Kulkarni, Prasanna and Bradley, Michael S. A. (2008) Segregation of bulk particulates through multiple process handling steps. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 505-510. ISBN 9788272062896

bulk solids handling, Jenike shear cell, shear testers

Bradley, Michael S. A., Berry, Rob, Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia. (Unpublished)

bulk solids handling, Jenike shear cell, shear testers,

Berry, Rob, Bradley, Michael S.A., Farnish, Richard J. and Angulo Pinzon, O.A. (2008) Effect of machine dependence on wall failure property measurements, Jenike versus an annular shear tester. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 344-350. ISBN 9788272062896

bulk solids, segregation

Bradley, Michael S.A., Farnish, Richard J., Reed, Alan R. and Kulkarni, Prasanna (2007) Evaluation of air induced segregation tendencies in pharmaceutical blends using a bench scale tester. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, N.S.W, Australia.. (Unpublished)

changing world, technology

Farnish, R.J. (2007) A changing world demands realistic expectations. Powder and Bulk Engineering, 21 (6). p. 8. ISSN 0897-6627

closed loop control, real-time systems,computational constraints, security constructs

Sparrow, R. D., Adekunle, Andrew, Berry, Robert and Farnish, Richard (2015) Simulating and modelling the impact of secure communication latency for closed loop control. In: Internet Technologies and Applications (ITA), 2015. IEEE, Wrexham, UK, pp. 138-143. ISSN 9781479980369 (doi:https://doi.org/10.1109/ITechA.2015.7317384)

computational methods, cost effectiveness, energy utilization, mass transfer, particles (particulate matter), pipelines, power consumption, pneumatic conveyors

Farnish, R.J. (1997) Power consumption and profit margins - less is more. Powder Handling and Processing, 9 (4). pp. 355-357. ISSN 0934-7348

consistent quality, feeding system, in-process, powder flow, process elements, repeatable outputs, space limitations, time spent, feeding, powders, process control

Farnish, R. (2009) Dosing of powders into processes - is your process control screwed? Bulk Solids Handling, 29 (5). pp. 278-281. ISSN 0173-9980

discharge (fluid mechanics), flow patterns, hoppers, materials handling, materials testing, particle size analysis, segregation (metallography), storage (materials), wall flow, continuous operation, storage vessel, time dependent properties, vessel design, materials handling equipment

Farnish, R.J. (2004) Choosing the right storage vessel for your continuous operation. Powder and Bulk Engineering, 18 (11). pp. 33-37. ISSN 0897-6627

discharge behaviour, discharge rates, flow streams, gas induction, high flux density, industrial process, outlet size, materials handling equipment, powders, filling

Farnish, R. J. (2007) Gravity discharge of powders at high flux densities through the exploitation of intensified gas induction effects. In: 9th International Conference on Bulk Materials Storage, Handling and Transportation, ICBMH 2007. University of Newcastle, Newcastle, NSW, Australia, 2007, University of Newcastle, New South Wales, Australia.

dosator, powder flow

Angulo Pinzon, O.A., Berry, R.J., Bradley, M.S., Farnish, R.J. and Antonijevic, M.D. ORCID: 0000-0002-5847-7886 (2009) The impact of powder flowing properties on dosator filling system operation. In: 2009 AAPS Annual Meeting and Exposition, 8-12 Nov 2009, Los Angeles, USA.

dosators, powders

Angulo Pinzon, O.A., Bradley, Michael, Berry, Robert and Farnish, Richard J. (2008) Modelling dosator filling and discharge of powder. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 586-591. ISBN 9788272062896

equipment design, powder characterisation,

Berry, Rob, Bradley, Michael S. A., Reed, Alan R., Farnish, Richard J. and Angulo Pinzon, O.A. (2007) Development of an annular wall friction test procedure, suitable for equipment design and powder characterisation. In: ICBMH Conference: 9th International Conference on Bulk Materials Storage, Handling and Transportation, 9-11 October 2007, The University of Newcastle, Australia. (Unpublished)

flow rate, hydrated lime, industrial applications, pipelines, pneumatic conveyors, air velocity, dense phase conveying, pneumatic conveying pipelines, pressure drop

Deng, T. ORCID: 0000-0003-4117-4317 , Farnish, R.J. and Bradley, M.S.A. (2007) Pressure drop in dense phase conveying. Bulk Solids Handling, 27 (5). pp. 296-301. ISSN 0173-9980

fuel pellets, breakage, belt conveyor, transport, design of experiment, Box–Behnken design

Gilvari, Hamid, van Battum, H, Farnish, Richard, Pang, Yusong, de Jong, Wiebren and Schott, Digena (2021) Fragmentation of fuel pellets during transport via a belt conveyor: a design of experiment study. Particuology, 66. pp. 29-37. ISSN 1674-2001 (doi:https://doi.org/10.1016/j.partic.2021.08.007)

handling problems, bulk granular material

Farnish, R. (2007) Common handling problems in bulk granular material. Aluminium International Today, 19 (3). pp. 38-40. ISSN 1475-455X

industrial control systems, real-time communication, impact modelling

Sparrow, R. D., Adekunle, A. A., Berry, R. J. and Farnish, R. J. (2014) Simulating and modelling the impact of security constructs on latency for open loop control. In: 6th Computer Science and Electronic Engineering Conference (CEEC), 2014. IEEE, Colchester, pp. 85-90. ISBN 9781479966929 (doi:https://doi.org/10.1109/CEEC.2014.6958560)

iron alloy powder, metal powder quality, metal powders segregation, rolling segregation, segregation effects, iron alloys, production control, rolling, segregation (metallography), Iron powder

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2006) Predicting segregation of metal powders. Powder Metallurgy, 49 (3). pp. 206-208. ISSN 0032-5899 (Print), 1743-2901 (Online) (doi:https://doi.org/10.1179/174329006X152442)

iron alloys, particle size, powder metallurgy, powder metals, quality control, rolling, size distribution, surface segregation, experimental procedure, interparticle force, materials and process, narrow size distributions, particle densities, representative sample, segregation effects, small particle size, segregation (metallography)

Kulkarni, P.A., Bradley, M.S.A. and Farnish, R.J. (2005) Segregation of metal powders. In: Euro PM 2005: Powder Metallurgy Congress and Exhibition. European Powder Metallurgy Association (EPMA), Prague, Czech Republic, pp. 61-66. ISBN 9781899072187

isotherms, mechanical permeability, particle size analysis, powders, quality assurance, reliability, storage (materials), mass flow discharge, materials handling equipment

Farnish, R. (2002) Perfecting powder storage & discharge. Chemical Processing, 65 (7). pp. 24-28. ISSN 0009-2630

materials handling, tankers (ships), bulk solids, core flow, draw in, free flowing, gas pressures, local environments, particulate materials, smooth wall, University of Greenwich, volumetric efficiency, Wolfson (CO), chemical industry

Farnish, R.J., Berry, R. and Bradley, M. (2008) Development of a novel - filling technique loading bulk particulate materials into tankers or processes. Bulk Solids Handling, 28 (4). pp. 238-241. ISSN 0173-9980

methods for design of hoppers, silos bins and bunkers

Bradley, Michael, Berry, Robert and Farnish, Richard (2011) Methods for design of hoppers. Silos, bins and bunkers for reliable gravity flow, for pharmaceutical, food, mineral and other applications. In: BulkSolids India 2011, 6-8 April 2011, Mumbai, India. (Unpublished)

plastic caking, caking strength, new caking tester, statistical analysis

Salehi, Hamid ORCID: 0000-0002-2516-6619 , Berry, Robert, Deng, Tong ORCID: 0000-0003-4117-4317 , Larsson, Sylvia H., Farnish, Richard and Bradley, Mike (2019) Development and application of a novel cake strength tester. Powder Technology, 350. pp. 36-42. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2019.03.024)

powder flow characterization, uniaxial compaction tester (UCT)

Salehi, Hamid, Berry, Robert, Farnish, Richard and Bradley, Mike (2019) A new uniaxial compression tester: development and application. Chemical Engineering Transactions, 74. pp. 463-468. ISSN 2283-9216 (doi:https://doi.org/10.3303/CET1974078)

powder handling, mineral processing

Farnish, Richard (2010) Tackling powder handling problems. Industrial Minerals. pp. 59-60.

powders, sensitivity, air effect segregation

Farnish, R.J., Kulkarni, P., Berry, R.J., Bradley, M.S.A. and Guillebert, V. (2011) Testing of powders for sensitivity to air effect segregation. Powder Metallurgy, 54 (4). pp. 468-470. ISSN 0032-5899 (Print), 1743-2901 (Online) (doi:https://doi.org/10.1179/174329011X13073642060730)

predicting, preventing wear, pneumatic conveying systems

Bradley, Michael, Farnish, Richard and Deng, Tong ORCID: 0000-0003-4117-4317 (2011) Predicting and preventing wear in pneumatic conveying systems. In: BulkSolids India 2011, 6-8 April 2011, Mumbai, India. (Unpublished)

reverse jet pulse cleaning; dust; filter media; industrial application; powders

Farnish, Richard, Bradley, Michael and Garg, Vivek ORCID: 0000-0002-8515-4759 (2023) Investigations into optimal pulse cleaning of dust filter media. In: ICBMH 2023: 14th International Conference on Bulk Materials Storage, Handling and Transportation. Proceedings: Wollongong, NSW Australia, 11th - 13th July, 2023. ICBMH 2023 . Engineers Australia, Wollongong, New South Wales, Australia, pp. 154-160. ISBN 978‐1925627831

segregation, iron ores

Farnish, R. (2007) Segregation of iron ores. Steel Times International, 31 (5). pp. 24-27. ISSN 0143-7798

storage, bulk materials

Farnish, R.J. (2003) Feeding of the 5,000 (-ton silo). Powder and Bulk Engineering, 17 (5). p. 10. ISSN 0897-6627

unmanned aerial vehicles; throughput; latency; security; wireless

Sparrow, R.D., Adekunle, A.A., Berry, R.J. and Farnish, R.J. (2015) Balancing throughput and latency for an aerial robot over a wireless secure communication link. In: 2015 IEEE 2nd International Conference on Cybernetics (CYBCONF). IEEE, pp. 184-189. ISBN 978-1-4799-8320-9 (doi:https://doi.org/10.1109/CYBConf.2015.7175929)

unmanned vehicles, cryptography, wireless, construct design

Sparrow, R. D, Adekunle, A. A., Berry, R. J. and Farnish, R. J. (2016) A novel block cipher design paradigm for secured communication. In: 2016 Annual IEEE 10th International Systems Conference (SysCon). IEEE, Florida, United States of America, pp. 1-6. ISBN 978-1-4673-9519-9 (doi:https://doi.org/10.1109/SYSCON.2016.7490659)

unmanned vehicles, security, wireless, QoS, QoE

Sparrow, R. D., Adekunle, A. A., Berry, R. J. and Farnish, R. J. (2016) The affect of two cryptographic constructs on QoS and QoE for unmanned control vehicles. In: 2015 9th International Conference on Next Generation Mobile Applications, Services and Technologies. IEEE, pp. 265-269. ISBN 978-1-4799-8660-6 (doi:https://doi.org/10.1109/NGMAST.2015.46)