Skip navigation

Items where Faculty / Department / Research Groups is "Faculty of Engineering & Science > Department of Applied Engineering & Management"

Items where Faculty / Department / Research Groups is "Faculty of Engineering & Science > Department of Applied Engineering & Management"

Up a level
Export as [feed] RSS
Jump to: 2018 | 2017 | 2016 | 2015 | 2013 | 2011 | 2008 | 2007 | 2006 | 2005 | 2003 | 1990
Number of items at this level: 130.

2018

Benoit, Hadrien, Ansart, Renaud, Neau, Herve, García-Triñanes, Pablo, Flamant, Gilles and Simonin, Olivier (2018) 3D numerical simulation of upflow bubbling fluidized bed in opaque tube under high flux solar heating. AIChE Journal. ISSN 0001-1541 (Print), 1547-5905 (Online) (In Press) (doi:10.1002/aic.16218)

Cardenas, Camilo, Bratvold, Reidar and Jafarizadeh, Babak (2018) Offshore exploratory drilling campaigns during oil price downturns: Maximizing value creation from flexibility. In: SPE Europec featured at 80th EAGE Annual Conference & Exhibition. Society of Petroleum Engineers, pp. 1-17.

Chakravarty, Somik, Fischer, Marc, García-Triñanes, Pablo, Dalle, Morgane, Meunier, Laurent, Aguerre-Chariol, Olivier, Le Bihan, Olivier and Morgeneyer, Martin (2018) Long-term dust generation from silicon carbide powders. Process Safety and Environmental Protection, 116. pp. 115-125. ISSN 0957-5820 (doi:10.1016/j.psep.2018.01.021)

Diaz-Rodriguez, P., García-Triñanes, P., Echezarreta-López, M. M., Santoveña, A. and Landin, M. (2018) Mineralized alginate hydrogels using marine carbonates for bone tissue engineering applications. Carbohydrate Polymers, 195. pp. 235-242. ISSN 0144-8617 (Print), 1879-1344 (Online) (doi:10.1016/j.carbpol.2018.04.101)

Gao, Xiaoyu (2018) An overview of manufacturing knowledge sharing in the product development process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ISSN 0954-4054 (Print), 2041-2975 (Online) (In Press) (doi:10.1177/0954405418759375)

Garg, Vivek, Mallick, S. S., García-Trinanes, Pablo and Berry, Robert James (2018) An investigation into the flowability of fine powders used in pharmaceutical industries. Powder Technology, 336. pp. 375-382. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:10.1016/j.powtec.2018.06.014)

Hasan, Syed, Khan, S. and Shah, Satya (2018) Supply chain performance improvement within collaborative product development environment. International Journal of Business Performance and Supply Chain Modelling, 9 (4). pp. 261-279. ISSN 1758-9401 (Print), 1758-941X (Online) (In Press) (doi:10.1504/IJBPSCM.2017.10012512)

Ilic, Dusan, Williams, Kenneth, Farnish, Richard, Webb, Erin and Liu, Gary (2018) On the challenges facing the handling of solid biomass feedstocks. Biofuels, Bioproducts and Biorefining, 12 (2). pp. 187-202. ISSN 1932-104X (Print), 1932-1031 (Online) (doi:10.1002/bbb.1851)

Kaur, Baldeep and Jana, Soumendu (2018) Cavity soliton molecules and all-optical push-broom effect. Journal of Lightwave Technology, 36 (12). pp. 2463-2470. ISSN 0733-8724 (Print), 1558-2213 (Online) (doi:10.1109/JLT.2018.2815845)

Kaur, Baldeep, Mittal, Anu, Jana, Soumendu, Mallick, S.S. and Wypych, Peter (2018) Stability and phase space analysis of fluidized-dense phase pneumatic transport system. Powder Technology, 330. pp. 190-200. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:10.1016/j.powtec.2018.02.023)

Kofinas, Alexander, Romanova, Anna, Tsay, Han-Huei (Crystal) ORCID: 0000-0003-4959-0411 and Ahmed, Sajeel (2018) Coping Cycle and its importance when designing an Assessment: Reflections on the Learning Process. In: Learning, Teaching and Student Experience, 24 - 25 April 2018, Glasgow. (In Press)

Naghi Ganji, E., Shah, S. and Coutroubis, A. (2018) Sustainable supply and demand chain integration within global manufacturing industries. In: Proceedings of the 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE, pp. 1807-1811. ISBN 978-1-5386-0949-1 ISSN 2157-362X (Online) (doi:10.1109/IEEM.2017.8290203)

Naghi Ganji, Elmira, Shah, Satya and Coutroubis, Alec (2018) DCM 4.0: Integration of Industry 4.0 and Demand Chain in Global Manufacturing. In: IEEE International Conference on Engineering Technology and Innovation, 17-20th June 2018, Germany. (In Press)

Naghi Ganji, Elmira, Shah, Satya and Coutroubis, Alec (2018) Mass Customisation and Technology Functions: Enhancing Market Responsiveness. In: IEEE International Conference on Engineering Technology and Innovation, 17-20 June 2018, Germany. (In Press)

Ojo, O. O., Shah, S. and Coutroubis, A. D. (2018) An overview of sustainable practices in food processing supply chain environments. In: Proceedings of the 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE, pp. 1792-1796. ISBN 978-1-5386-0949-1 ISSN 2157-362X (Online) (doi:10.1109/IEEM.2017.8290200)

Romanova, Anna (2018) Personal Belbin types and MBTI preferences combination in group work assuring success. In: SHIFT 2018, Friday 5 January, 2018, Greenwich Maritime Campus, Queen Anne Court.

Romanova, Anna V., Horoshenkov, Kirill V. and Krynkin, Anton (2018) Dynamically rough boundary scattering effect on a propagating continuous acoustical wave in a circular pipe with flow. Sensors, 18:1098. ISSN 1424-8220 (Online) (doi:10.3390/s18041098)

Shah, S., Bardon Soriano, C. and Coutroubis, A. D. (2018) Is Big Data for everyone? The challenges of Big Data adoption in SMEs. In: Proceedings of the 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE, pp. 803-807. ISBN 978-1-5386-0947-7 ISSN 2157-362X (Online) (doi:10.1109/IEEM.2017.8290002)

Shah, S., Long, M. and Naghi Ganji, E. (2018) Achieving strategic growth in microenterprises through information technology: UK micro enterprise case study. In: Proceedings of the 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE, pp. 1133-1137. ISBN 978-1-5386-0949-1 ISSN 2157-362X (Online) (doi:10.1109/IEEM.2017.8290069)

Shah, Satya, Mabbott, Owen, Naghi Ganji, Elmira and Bate, Jordan (2018) Innovation and I4.0 Management in Connected and Autonomous Automotive Manufacturing. In: IEEE International Conference on Engineering Technology and Innovation, 17-20 June 2018, Germany. (In Press)

Shah, Satya and Mattiuzza, Steffano (2018) Adoption of Additive Manufacturing Approaches: The Case of Manufacturing SMEs. In: IEEE International Conference on Engineering Technology and Innovation, 17-20 June 2018, Germany. (In Press)

Shah, Satya and Wiese, Jan (2018) Reality of Big Data Adoption in Supply Chain for Sustainable Manufacturing SMEs. In: IEEE International Conference on Engineering Technology and Innovation, 17-20th June 2018, Germany. (In Press)

2017

Chakravarty, Somik, Fischer, Marc, García-Triñanes, Pablo, Parker, David, Le Bihan, Olivier and Morgeneyer, Martin (2017) Study of the particle motion induced by a vortex shaker. Powder Technology, 322. pp. 54-64. ISSN 0032-5910 (doi:10.1016/j.powtec.2017.08.026)

Criado, Maria, Bernal, Susan A., García-Triñanes, Pablo and Provis, John L. (2017) Influence of slag composition on the stability of steel in alkali-activated cementitious materials. Journal of Materials Science. ISSN 0957-4530 (Print), 1573-4838 (Online) (doi:10.1007/s10853-017-1919-3)

The University Of Greenwich (2017) STENT WO 2016116748 A1. WO 2016116748 A1.

El Souri, Mohammed, Gao, James and Owodunni, Oladele (2017) An analysis of design for manufacturing requirements for managing aerospace manufacturing knowledge. In: Advances in Manufacfturing Technology XXXI, Proceedings of the 15th International Conference on Manufacturing Research, Incorporating the 32nd National Conference on Manufacturing Research, September 5-7, 2017, University of Greenwich, UK. Advances in Transdisciplinary Engineering Series, 6 . IOS Press, pp. 491-496. ISBN 978-1-61499-791-7 ISSN 2352-751X (Print), 2352-7528 (Online) (doi:10.3233/978-1-61499-792-4-491)

El Souri, Mohammed, Gao, James, Owodunni, Oladele, Simmonds, Clive and Martin, Nick (2017) Improving design for manufacturing implementation in knowledge intensive collaborative environments - An analysis of organisational factors in aerospace manufacturing. In: 2017 IEEE Technology & Engineering Management Conference (TEMSCON). IEEE. ISBN 978-1-5090-1115-5 ISSN 978-1-5090-1114-8 (Online) (doi:10.1109/TEMSCON.2017.7998417)

El Souri, Mohammed, Gao, James, Owodunni, Oladele, Simmonds, Clive and Martin, Nick (2017) A structured approach to defect data management for improving DFM implementation in aerospace manufacturing. International Journal of Product Lifecycle Management, 10 (4). ISSN 1743-5110 (Print), 1743-5129 (Online) (In Press) (doi:10.1504/IJPLM.2017.090330)

Esfahani, Alireza, Mantas, Georgios, Matischek, Rainer, Saghezchi, Firooz B., Rodriguez, Jonathan, Bicaku, Ani, Maksuti, Silia, Tauber, Markus, Schmittner, Christoph and Bastos, Joaquim (2017) A lightweight authentication mechanism for M2M communications in industrial IoT environment. IEEE Internet of Things. pp. 1-8. ISSN 2327-4662 (In Press) (doi:10.1109/JIOT.2017.2737630)

Evans, Richard David, Gao, James Xiaoyu, Martin, Nick and Simmonds, Clive (2017) A new paradigm for virtual knowledge sharing in product development based on emergent social software platforms. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture:095440541769. ISSN 0954-4054 (Print), 2041-2975 (Online) (doi:10.1177/0954405417699018)

Gao, James and Bernard, Alain (2017) An overview of knowledge sharing in new product development. The International Journal of Advanced Manufacturing Technology. pp. 1-6. ISSN 0268-3768 (Print), 1433-3015 (Online) (doi:10.1007/s00170-017-0140-5)

Gao, Xiaoyu (2017) A multi-pattern compensation method to ensure even temperature in composite materials during microwave curing process. Composites Part A: Applied Science and Manufacturing. ISSN 1359-835X (doi:10.1016/j.compositesa.2017.12.17)

Gao, Xiaoyu, El Souri, Mohammed and Keates, Simeon ORCID: 0000-0002-2826-672X (2017) Advances in Manufacturing Technology XXXI. Advances in Transdisciplinary Engineering, 6 . IOS Press, Amsterdam. ISBN 978-1-61499-791-7

García-Triñanes, P., Seville, J.P.K., Ansart, R., Benoit, H., T.W., Leadbeater and D.J., Parker (2017) Particle motion and heat transfer in an upward-flowing dense particle suspension: application in solar receivers. Chemical Engineering Science, 177. pp. 313-322. ISSN 0009-2509 (Print), 1873-4405 (Online) (doi:10.1016/j.ces.2017.11.041)

Giddaluru, Muni Prasad, Gao, James X. and Bhatti, Raj (2017) Integrating product knowledge with modular product structures in PLM. In: ICIDM2017: International Conference on Innovative Design and Manufacturing, July 17-19, 2017, Milan, Italy.

Kaur, Baldeep and Jana, Soumendu (2017) Generation and dynamics of one-and two-dimensional cavity solitons in a vertical-cavity surface-emitting laser with a saturable absorber and frequency-selective feedback. Journal of the Optical Society of America B, 34 (7). pp. 1374-1385. ISSN 0740-3224 (Print), 1520-8540 (Online) (doi:10.1364/JOSAB.34.001374)

Kaur, Baldeep, Mittal, Anu, Mallick, S.S., Pan, Renhu and Jana, Soumendu (2017) Numerical simulation of fluidized dense-phase pneumatic conveying of powders to develop improved model for solids friction factor. Particuology, 35. pp. 42-50. ISSN 1674-2001 (doi:10.1016/j.partic.2016.11.006)

Le, C. H., Ann Phan, P., Quoc Le, H., Long Vo, D., Tuan Mai, A., Tam Le, N. and Hoa Le, M. (2017) Innovative development of the inspired sinewave device to measure lung functions and inhomogeneity for diagnosis and evaluations of early lung diseases. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer Singapore, pp. 649-654. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:10.1007/978-981-10-4361-1_111)

Le, C. H., Mai, A. T., Phan, P. A., Le, H. Q., Le, T. and Packianather, M.S. (2017) Detection and monitoring of cancers with biosensors in Vietnam. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer, Singapore, pp. 687-691. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:10.1007/978-981-10-4361-1_118)

Le, C. H., Pham, B. M., Tran, D. T., Lam, K., Le, T. H., Vo, D. L., Mengistu, S. and Packianather, M. S. (2017) An integrated system and framework for development of medical applications and products based on medical imaging data. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer, Singapore, pp. 363-368. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:10.1007/978-981-10-4361-1_61)

Le, Chi Hieu, Kasmaji, Wisnu Wijaya, Packianather, Michael S., Mengistu, Samuel, Tran, Duc Tang and Chu, Anh My (2017) Customer driven mass-customisation and innovative product development with parametric design & generative modeling. In: Proceedings of the 15th International Conference on Manufacturing Research. SAGE publishing, London. (In Press)

Le, Chi Hieu, Lee, Raymond, Luo, Jin, Phan, Phi Anh, Le, Trung and Le, Minh Hoa (2017) Assistive technologies for the older people: Physical activity monitoring and fall detection. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer Singapore, pp. 102-105. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:10.1007/978-981-10-4361-1)

Le Tham, Phouc, Aghezzaf, El-Houssaine, Khatab, Abdelhakim and Le, Chi Hieu (2017) Integrated production and imperfect preventive maintenance planning: An effective MILP-based Relax-and-Fix/Fix-and-Optimize Method. In: Proceedings of the 6th International Conference on Operations Research and Enterprise Systems (ICORES 2017). SCITEPRESS – Science and Technology Publications, Lda, pp. 483-490. ISBN 978-989-758-218-9 (doi:10.5220/0006285504830490)

Li, Nanya, Li, Yingguang, Jelonnek, John, Link, Guido and Gao, James (2017) A new process control method for microwave curing of carbon fibre reinforced composites in aerospace applications. Composites Part B: Engineering, 122. pp. 61-70. ISSN 1359-8368 (doi:10.1016/j.compositesb.2017.04.009)

Liu, Changqing, Li, Yingguang and Gao, James (2017) Special issue on digital enterprise technologies (editorial). International Journal of Advanced Manufacturing Technology. pp. 1-2. ISSN 0268-3768 (Print), 1433-3015 (Online) (doi:10.1007/s00170-017-0595-4)

Naghi Ganji, Elmira, Shah, Satya and Coutroubis, Alec (2017) Bridging new product development with sustainable supply chain management practices. International Journal of Economics and Management Systems, 2. pp. 178-186. ISSN 2367-8925

Naghi Ganji, Elmira, Shah, Satya and Coutroubis, Alec (2017) Case study analysis of sustainable supply chain redesign linking with new product development. WSEAS Transactions on Business and Economics, 14:22. pp. 193-205. ISSN 1109-9526 (Print), 2224-2899 (Online)

Naghi Ganji, Elmira, Shah, Satya and Coutroubis, Alec (2017) An evaluation of demand focused chain contribution to industrial sustainability. In: Advances in Manufacturing Technology XXXI: Proceedings of the 15th International Conference on Manufacturing Research. Advances in Transdisciplinary Engineering (6). IOS Press, pp. 359-364. ISBN 978-1-61499-791-7 ISSN 2352-751X (Print), 2352-7528 (Online) (doi:10.3233/978-1-61499-792-4-359)

Naghi Ganji, Elmira, Shah, Satya and Coutroubis, Alec (2017) The role of sustainable new product development in demand driven chains. In: Proceedings of the 2017 International Conference on Industrial Engineering, Management Science and Application (ICIMSA). IEEE, pp. 1-5. ISBN 978-1-5090-6336-9 ISSN 978-1-5090-6335-2 (Online) (doi:10.1109/ICIMSA.2017.7985611)

Nguyen, T. A., Nguyen, Tien V., Tran, D. T., Nguyen, Toan V., Le, C. H., Nguyen, V. B. and Le, H. Q. (2017) Microfluidic impedance biosensors for monitoring a single and multiple cancer cells in anticancer drug treatments. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer Singapore, pp. 681-685. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:10.1007/978-981-10-4361-1_117)

Nguyen, V. B., Le, C. H., Zhang, Z., Lee, R., Nguyen, T. A. and Packianather, M. S. (2017) Recent advances in experimental testing and computational modelling for characterisation of mechanical properties of biomaterials and biological cells. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer, Singapore, pp. 655-660. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:10.1007/978-981-10-4361-1_112)

Ojo, Olumide, Shah, Satya and Coutroubis, Alec (2017) Study of energy savings and sustainable practices adoption in telecommunication services. WSEAS Transactions on Communications, 16:19. pp. 159-168. ISSN 1109-2742 (Print), 2224-2864 (Online)

Packianather, M. S., Le, C. H., Pham, Dinh Trung and Le, Hoai Quoc (2017) Advanced micro and nano manufacturing technologies used in medical domain. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer, Singapore, pp. 637-642. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:10.1007/978-981-10-4361-1_109)

Pham, B. M., Le, C. H., Do, N. T., Vo, D. L., Le, T., Lee, R., Packianather, M. S. and Mengistu, S. (2017) Cost-effective solutions and tools for medical image processing and design of personalised cranioplasty implants. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer, Singapore, pp. 397-402. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:10.1007/978-981-10-4361-1_67)

Raza, M., Hoa Le, M., Aslam, N., Le, C. Hieu, Tam Le, N. and Ly Le, T. (2017) Telehealth technology: Potentials, challenges and research directions for developing countries. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer, Singapore, pp. 523-528. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:10.1007/978-981-10-4361-1_89)

Romanova, A. and Coutroubis, A. D. (2017) HRC method to measure concrete sewer pipe corrosion rate induced by sulphuric acid environment: temperature and pH. In: 4th IWA/IAHR International Conference on Urban Drainage (ICUD), 10-15 September 2017, Prague, Czech Republic.

Salah, Ghofran M. J. A. and Romanova, Anna (2017) Coconut fibre as an alternative growth compound for Living Green Walls. In: The Second Medway Engineering Conference on Systems Efficiency, Sustainability and Modelling, Tuesday, 6th June 2017, University of Greenwich, Chatham Maritime ME4 4TB.

Shah, Satya, Mattiuzza, Stefano, Naghi Ganji, Elmira and Coutroubis, Alec (2017) Contribution of additive manufacturing systems to supply chain. In: Proceedings of the 2017 International Conference on Industrial Engineering, Management Science and Application (ICIMSA). IEEE, pp. 1-5. ISBN 978-1-5090-6336-9 ISSN 978-1-5090-6335-2 (Online) (doi:10.1109/ICIMSA.2017.7985586)

Shah, Satya and Naghi Ganji, Elmira (2017) Lean production and supply chain innovation in baked foods supplier to improve performance. British Food Journal. ISSN 0007-070X (doi:10.1108/BFJ-03-2017-0122)

Shah, Satya, Naghi Ganji, Elmira and Coutroubis, Alec (2017) Development of NPD portfolio management in project based environments. In: Advances in Manufacturing Technology XXXI: Proceedings of the 15th International Conference on Manufacturing Research. Advances in Transdisciplinary Engineering (6). IOS Press, pp. 409-414. ISBN 978-1-61499-791-7 ISSN 2352-751X (Print), 2352-7528 (Online) (doi:10.3233/978-1-61499-792-4-409)

Shah, Satya, Naghi Ganji, Elmira and Coutroubis, Alec (2017) Lean production practices to enhance organisational performance. In: MATEC Web of Conferences 125: 21st International Conference on Circuits, Systems, Communications and Computers (CSCC 2017). EDP Sciences, pp. 1-7. ISSN 2261-236X (Online) (doi:10.1051/matecconf/201712502003)

Shah, Satya, Naghi Ganji, Elmira and Coutroubis, Alexander (2017) Evaluation of sustainable practices within project management methods. In: MATEC Web of Conferences: The 21st International Conference on Circuits, Systems, Communications and Computers (CSCC 2017) (CSCC 2017). EDP Sciences, pp. 1-7. ISSN 2261-236X (Online) (doi:10.1051/matecconf/201712502002)

Shah, Satya, Olajide Ojo, Olumide, Naghi Ganji, Elmira and Kadry Idris Abdellah, Ahmed (2017) Impact of sustainable energy savings in Nigerian telecoms industry. In: International Journal of Renewable Energy Sources. IARAS (International Association of Research and Science), pp. 27-35. ISSN 2367-9123 (In Press)

Sparrow, R. D, Adekunle, A. A. and Berry, R. J. (2017) LEOPARD lightweight encryption operation permutation addition rotation and diffusion. In: IEEE 10th International Conferences on Signal Processing and Communication Systems. IEEE, pp. 1-5. ISBN 978-1-5090-0941-1 (doi:10.1109/ICSPCS.2016.7843322)

Tran, Q., Le, T., Le, C. H. and Vo, T. V. (2017) Electrophysiological modeling in generalized epilepsy using surface EEG and anatomical brain structures. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer Nature Singapore Pte Ltd, pp. 699-704. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:10.1007/978-981-10-4361-1_120)

Zammit, Joseph Paul, Gao, James and Evans, Richard (2017) The challenges of adopting PLM tools involving diversified technologies in the automotive supply chain. In: IFIP 14th International Conference on Product Lifecycle Management, 9-12 July 2017, Seville, Spain. (Unpublished)

Zammit, Joseph Paul, Gao, James, Evans, Richard and Maropoulos, Paul (2017) A knowledge capturing and sharing framework for improving the testing processes in global product development using storytelling and video sharing. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ISSN 0954-4054 (Print), 2041-2975 (Online) (doi:10.1177/0954405417694062)

Zigan, Stefan, Hettiaratchi, Kaushika and Milledge, John J. ORCID: 0000-0003-0252-6711 (2017) Evaluate the blend quality of powders using a simplified mixing law. In: Reliable Flow of Particulate Solid V (RELPOWFLO V), 13-15 June 2017, Skien, Norway.

2016

Bianchini, A., Farnish, R.J., Gambuti, M. and Saccani, C. (2016) Predictive model for corn flour discharge rates through an aerated hopper. Powder Technology, 298. pp. 84-89. ISSN 0032-5910 (doi:10.1016/j.powtec.2016.05.009)

El Souri, Mohammed, Gao, James, Owodunni, Oladele, Martin, Nick and Simmonds, Clive (2016) An investigation into the management of design for manufacturing knowledge in an aerospace company. In: Advances in Manufacturing Technology XXX - Proceedings of the 14th International Conference on Manufacturing Research. Advances in Transdisciplinary Engineering . IOS, pp. 401-406. ISBN 978-1-61499-667-5 (doi:10.3233/978-1-61499-668-2-401)

Esfahani, Alireza, Mantas, Georgios and Rodriguez, Jonathan (2016) An efficient null space-based Homomorphic MAC scheme against tag pollution attacks in RLNC. IEEE Communications Letters, 20 (5). pp. 918-921. ISSN 1089-7798 (doi:10.1109/LCOMM.2016.2547420)

Esfahani, Alireza, Mantas, Georgios, Rodriguez, Jonathan and Neves, José Carlos (2016) An efficient homomorphic MAC-based scheme against data and tag pollution attacks in network coding-enabled wireless networks. International Journal of Information Security, 16 (6). pp. 627-639. ISSN 1615-5262 (Print), 1615-5270 (Online) (doi:10.1007/s10207-016-0351-z)

Essop, Ismael A., Evans, Richard D., Wan, Shan, Giddaluru, Muni P., Gao, James X., Baudry, David, Mahdikhah, Sara and Messaadia, Mourad (2016) Investigation into current industrial practices relating to product lifecycle management in a multi-national manufacturing company. Computer-Aided Design and Applications, 13 (5). pp. 647-661. ISSN 1686-4360 (Online) (doi:10.1080/16864360.2016.1150711)

Evans, Richard D., Gao, James X., Mahdikhah, Sara, Messaadia, Mourad and Baudry, David (2016) A review of crowdsourcing literature related to the manufacturing industry. Journal of Advanced Management Science, 4 (3). pp. 224-231. ISSN 2168-0787 (doi:10.12720/joams.4.3.224-231)

Evans, Richard David, Gao, James Xiaoyu, Mahdikhah, Sara, Messaadia, Mourad and Baudry, David (2016) Crowdsourcing user-contributed solutions to aerospace product development issues through micro-blogging. Electronic Journal of Knowledge Management, 14 (2). pp. 126-136. ISSN 1479-4411 (Print), 1479-4411 (Online)

Garcia Trinanes, Pablo (2016) Particle progress. The Chemical Engineer, 906 (7):3. pp. 38-40. ISSN 0302-0797

Hussain, Tariq, Deng, Tong, Bradley, Michael, Armour-Chelu, David, Gorman, Terry and Kaialy, Waseem (2016) Evaluation studies of a sensing technique for electrostatic charge polarity of pharmaceutical particulates. IET Science Measurement and Technology. ISSN 1751-8822 (Print), 1751-8830 (Online) (doi:10.1049/iet-smt.2015.0194)

Kaur, Baldeep and Jana, Soumendu (2016) A generic travelling wave solution in dissipative laser cavity. Pramana, 87 (4):53. ISSN 0304-4289 (Print), 0973-7111 (Online) (doi:10.1007/s12043-016-1244-4)

Kaur, Baldeep, Mittal, Anu, Wypych, Peter, Mallick, S. S. and Jana, Soumendu (2016) On developing improved modelling and scale-up procedures for pneumatic conveying of fine powders. Powder Technology, 305. pp. 270-278. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:10.1016/j.powtec.2016.09.080)

Kotzur, Benjamin A., Bradley, Michael S.A., Berry, Robert J. and Farnish, Richard J. (2016) Breakage characteristics of granulated food products for prediction of attrition during lean-phase pneumatic conveying. International Journal of Food Engineering, 12 (9). ISSN 1556-3758 (Print), 2194-5764 (Online) (doi:10.1515/ijfe-2016-0045)

Liu, Xu, Li, Yingguang and Gao, James (2016) A multi-perspective dynamic feature concept in adaptive NC machining of complex freeform surfaces. The International Journal of Advanced Manufacturing Technology, 82 (5-8). pp. 1259-1268. ISSN 0268-3768 (Print), 1433-3015 (Online) (doi:10.1007/s00170-015-7456-9)

Lulbadda Waduge, L.L., Zigan, S., Stone, L.E., Belaidi, A. and García-Triñanes, P. (2016) Predicting concentrations of fine particles in enclosed vessels using a camera based system and CFD simulations. Process Safety and Environmental Protection, 105. pp. 262-273. ISSN 0957-5820 (Print), 1744-3598 (Online) (doi:10.1016/j.psep.2016.11.013)

Messaadia, Mourad, Baudry, David, Louis, Anne, Mahdikhah, Sara, Evans, Richard, Gao, James, Paquet, Thierry, Sahnoun, M'hammed and Mazari, Belhacène (2016) PLM adoption in SMEs context. Computer-Aided Design and Applications, 13 (5). pp. 618-627. ISSN 1686-4360 (Online) (doi:10.1080/16864360.2016.1150706)

Owodunni, O. O. and Pinder, D. (2016) Sustainability improvement in milling operation through improved tool design and optimized process parameters: An industrial case study. In: Procedia CIRP. Elsevier, pp. 498-503. ISSN 2212-8271 (doi:10.1016/j.procir.2016.01.115)

Romanova, Anna (2016) Concrete corrosion induced by sulfuric acid. In: Sheffield research seminar, Wednesday, 2 March 2016, University of Sheffield.

Romanova, Anna (2016) Hands-on delivery of group business project. In: SHIFT 2017: Annual Conference of Learning, Teaching & Assessment, Friday 6 January, 2017, Greenwich Maritime Campus, Queen Anne Court. (Submitted)

Romanova, Anna and Coutroubis, Alec D. (2016) 'Pro' and 'hands-on' approach in business project delivery. In: The First Medway Engineering Conference on Systems: Efficiency, Sustainability and Modelling in Chatham, 6 June 2016, Pilkington Building, University of Greenwich, Central Avenue, Chatham, Medway.

Romanova, Anna and Horoshenkov, Kirill V. (2016) An application of a parametric transducer to measure the acoustical properties of a living green wall. The Journal of the Acoustical Society of America, 140 (4). ISSN 0001-4966 (Print), 1520-8524 (Online) (doi:10.1121/1.4971053)

Shah, Satya and Hasan, Syed (2016) Procurement practices in project based manufacturing environments. In: MATEC Web of Conferences. Systems, 76 (02007). Matec, Greece. ISSN 2261-236X (Online) (doi:10.1051/matecconf/20167602007)

Shah, Satya, Naghi Ganji, Elmira and Hasan, Syed (2016) Environmental management systems and sustainability in SMEs. In: 20th International Conference on Circuits, Systems, Communications and Computers (CSCC 2016). Systems, 76 (02006). Matec Web of Conferences, Greece. ISSN 2261-236X (Online) (doi:10.1051/matecconf/20167602006)

Shah, Satya, Naghi Ganji, Elmira and Hasan, Syed (2016) An analysis of environmental management and sustainability in SMEs. WSEAS Transactions on Environment and Development, 12:a745815-054. pp. 353-365. ISSN 1790-5079 (Print), 2224-3496 (Online)

Sparrow, R. D, Adekunle, A. A., Berry, R. J. and Farnish, R. J. (2016) A novel block cipher design paradigm for secured communication. In: 2016 Annual IEEE 10th International Systems Conference (SysCon). IEEE, Florida, United States of America, pp. 1-6. ISBN 978-1-4673-9519-9 (doi:10.1109/SYSCON.2016.7490659)

Sparrow, R. D., Adekunle, A. A., Berry, R. J. and Farnish, R. J. (2016) The affect of two cryptographic constructs on QoS and QoE for unmanned control vehicles. In: 2015 9th International Conference on Next Generation Mobile Applications, Services and Technologies. IEEE, pp. 265-269. ISBN 978-1-4799-8660-6 (doi:10.1109/NGMAST.2015.46)

Sucasas, Victor, Mantas, Georgios, Radwan, Ayman and Rodriguez, Jonathan (2016) An OAuth2-based protocol with strong user privacy preservation for smart city mobile e-Health apps. In: 2016 IEEE International Conference on Communications (ICC). IEEE, pp. 1-6. ISBN 978-1-4799-6665-3 ISSN 1938-1883 (Online) (doi:10.1109/ICC.2016.7511598)

Sucasas, Victor, Mantas, Georgios, Saghezchi, Firooz B., Radwan, Ayman and Rodriguez, Jonathan (2016) An autonomous privacy-preserving authentication scheme for intelligent transportation systems. Computers & Security, 60. pp. 193-205. ISSN 0167-4048 (doi:10.1016/j.cose.2016.04.006)

Wan, Shan, Li, Dongbo and Gao, James (2016) Exploring the advantages of content management systems for managing engineering knowledge in product-service systems. Procedia CIRP, 56. pp. 446-450. ISSN 2212-8271 (doi:10.1016/j.procir.2016.10.087)

Wan, Shan, Li, Dongbo, Gao, James, Roy, Rajkumar and He, Fei (2016) A collaborative machine tool maintenance planning system based on content management technologies. The International Journal of Advanced Manufacturing Technology, 94 (5-8). pp. 1639-1653. ISSN 0268-3768 (Print), 1433-3015 (Online) (doi:10.1007/s00170-016-9829-0)

Wan, Shan, Li, Dongbo, Gao, Xiaoyu, Roy, Rajkumar and Tong, Yifei (2016) Process and knowledge management in a collaborative maintenance planning system for high value machine tools. Computers in Industry, 84. pp. 14-24. ISSN 0166-3615 (doi:10.1016/j.compind.2016.11.002)

Wilson, Joel, Arokiam, Alan, Belaidi, Hafid and Ladbrook, John (2016) A simple energy usage toolkit from manufacturing simulation data. Journal of Cleaner Production, 122. pp. 266-276. ISSN 0959-6526 (Print), 1879-1786 (Online) (doi:10.1016/j.jclepro.2015.11.071)

Zammit, Joseph Paul, Gao, James and Evans, Richard (2016) Capturing and sharing product development knowledge using storytelling and video sharing. Procedia CIRP, 56. pp. 440-445. ISSN 2212-8271 (doi:10.1016/j.procir.2016.10.081)

Zammit, Joseph Paul, Gao, James and Evans, Richard (2016) Development of a knowledge sharing framework for improving the testing processes in global product development. International Journal of Product Lifecycle Management, 9 (1). p. 1. ISSN 1743-5110 (Print), 1743-5129 (Online) (doi:10.1504/IJPLM.2016.078853)

2015

Elshaer, Amr, Kaialy, Waseem, Akhtar, Noreen, Lyire, Affiong, Hussain, Tariq, Alany, Raid and Mohammed, Afzal (2015) A methodological evaluation and predictive in silico investigation into the multi-functionality of arginine in directly compressed tablets. European Journal of Pharmaceutics and Biopharmaceutics, 96. pp. 272-281. ISSN 0939-6411 (Print), 0939-6411 (Online) (doi:/10.1016/j.ejpb.2015.07.028)

Evans, Richard, Gao, Xiaoyu, Martin, Nick and Simmonds, Clive (2015) Integrating social knowledge and collaboration tools into dispersed product development. International Journal of Advanced Corporate Learning, 8 (2). pp. 20-27. ISSN 1867-5565 (Online) (doi:10.3991/ijac.v8i2.4548)

Frystacki, Thomas H., Arokiam, Alan, Belaidi, Abdelhafid and Kirk, Paul L. (2015) Energy usage and temperature distribution in old mega factories. Energy and Buildings. ISSN 0378-7788 (Print), 1872-6178 (Online) (Submitted)

Jafarizadeh, Babak and Bratvold, Reidar (2015) Oil and gas exploration valuation and the value of waiting. Engineering Economist, 60 (4). pp. 245-263. ISSN 0013-791X (Print), 1547-2701 (Online) (doi:10.1080/0013791X.2015.1045647)

Li, Yingguang, Gao, James and Lee, Chen-Han (2015) Special issue on Computational Numerical Control Machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229 (7). pp. 1085-1086. ISSN 0954-4054 (Print), 2041-2975 (Online) (doi:10.1177/0954405415592117)

Maniruzzaman, M., Nair, A., Scoutaris, N., Bradley, Michael S.A., Snowden, M.J. and Douroumis, D. (2015) One-step continuous extrusion process for the manufacturing of solid dispersions. International Journal of Pharmaceutics Special Issue on "Continuous Manufacturing and Process Analytical Tools”, 496 (1). pp. 42-51. ISSN 0378-5173 (Print), 1873-3476 (Online) (doi:10.1016/j.ijpharm.2015.09.048)

Qureshi, Athar (2015) Interference diagnosis in wireless systems by using NI USRP. International Journal of Simulation: Systems, Science and Technology, 16 (6). 10.1-10.10. ISSN 1473-8031 (Print), 1473-804x (Online) (doi:10.5013/IJSSST.a.16.06.10)

Romanova, Anna (2015) Corrosion induced by sulfuric acid – method of concrete material properties upgrade? In: Faculty of Engineering and Science, Research Symposium, 16 September 2015, Pembroke Wardroom, Medway School of Pharmacy. (Unpublished)

Shah, Satya, Al-Badri, Sara and Hasan, Syed (2015) Use of business competitions to enhance student employability in Higher Education. In: Recent Advances in Educational Technologies: Proceedings of the 2015 International Conference on Education and Modern Educational Technologies (EMET 2015). Educational Technologies Series, 18 (18). WSEAS, Greece, pp. 140-147. ISBN 978-1-61804-322-1 ISSN 2227-4618

Shah, Satya and Hasan, Syed (2015) Influence of IT on micro enterprises to pursue strategic growth. In: Recent Advances in Computer Science: Proceedings of the 19th International Conference on Computers (CSCC'15). Recent Advances in Computer Engineering Series, 32 (32). WSEAS, Greece, pp. 488-496. ISBN 978-1-61804-320-7 ISSN 1790-5109

Simons, T.A.H., Bensmann, S., Zigan, Stefan, Feise, H.J., Zetzener, H. and Kwade, A. (2015) Characterization of granular mixing in a helical ribbon blade blender. Powder Technology, 293. pp. 15-25. ISSN 0032-5910 (doi:10.1016/j.powtec.2015.11.041)

Skarvelis-Kazakos, Spyros, Papadopoulos, Panagiotis, Grau Unda, Iñaki, Gorman, Terry, Belaidi, Abdelhafid and Zigan, Stefan (2015) Multiple energy carrier optimisation with intelligent agents. Applied Energy, 167. pp. 323-335. ISSN 0306-2619 (doi:10.1016/j.apenergy.2015.10.130)

Ton, Bram T., Farnish, Richard J. and Zigan, Stefan (2015) Resolving lateral segregation effects of static blenders. In: IV International Conference on Particle-Based Methods (PARTICLES 2015). International Centre for Numerical Methods in Engineering (CIMNE), Barcelona, Spain, pp. 714-721. ISBN 978-8494424472

Zigan, S. and Lulbadda Waduge, L.L. (2015) Analysis of airborne fines in cylindrical biomass storage silos. In: IV International Conference on Particle-Based Methods (PARTICLES 2015). International Centre for Numerical Methods in Engineering (CIMNE), Barcelona, Spain, pp. 900-908. ISBN 978-8494424472

2013

Hasan, Syed M. and Shah, Satya (2013) Use of process modelling in product development integration within manufacturing environment. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 1210-1214. ISSN 1022-6680 (Print), 1662-8985 (Online) (doi:10.4028/www.scientific.net/AMR.816-817.1210)

Hasan, Syed M. and Shah, Satya (2013) An overview of change management within manufacturing environment. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 1205-1209. ISSN 1022-6680 (Print), 1662-8985 (Online) (doi:10.4028/www.scientific.net/AMR.816-817.1205)

2011

Baxter, David, Gao, James and Li, Yingguang (2011) Innovative product development (Editorial). International Journal of Product Lifecycle Management, 5 (2/3/4). pp. 99-101. ISSN 1743-5110 (Print), 1743-5129 (Online)

2008

Aziz, Hayder, Li, Zhengxi and Gao, James (2008) Engineering design knowledge management in de-centralised virtual enterprises. Computer-Aided Design and Applications, 5 (6). pp. 787-800. ISSN 1686-4360 (Online) (doi:10.3722/cadaps.2008.787-800)

2007

Gao, J. and Baxter, D. (2007) Enabling technologies and frameworks for new product development: a selection of papers from ICMR2005. International Journal of Production Research, 45 (7). pp. 1485-1487. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:10.1080/00207540600942201)

Gao, J. X. and Bradfield, D. J. (2007) A methodology to facilitate knowledge sharing in the new product development process. International Journal of Production Research, 45 (7). pp. 1489-1504. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:10.1080/00207540600942227)

Mountney, S. L., Gao, J. X. and Wiseall, S. (2007) A knowledge system to support manufacturing knowledge during preliminary design. International Journal of Production Research, 45 (7). pp. 1521-1537. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:10.1080/00207540600942300)

2006

Baxter, David and Gao, James (2006) Development of a process-based data driven engineering design knowledge re-use system. Computer-Aided Design and Applications, 3 (1-4). pp. 109-117. ISSN 1686-4360 (Online) (doi:10.1080/16864360.2006.10738447)

Ciurana, J., Ferrer, I. and Gao, J. X. (2006) Activity model and computer aided system for defining sheet metal process planning. Journal of Materials Processing Technology, 173 (2). pp. 213-222. ISSN 0924-0136 (doi:10.1016/j.jmatprotec.2005.11.031)

Dani, S., Harding, J. A., Case, K., Young, R. I. M., Cochrane, S., Gao, J. and Baxter, D. (2006) A methodology for best practice knowledge management. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 220 (10). pp. 1711-1728. ISSN 0954-4054 (Print), 2041-2975 (Online) (doi:10.1243/09544054JEM651)

Sharma, R. and Gao, J. X. (2006) A knowledge-based manufacturing and cost evaluation system for product design/re-design. The International Journal of Advanced Manufacturing Technology, 33 (9-10). pp. 856-865. ISSN 0268-3768 (Print), 1433-3015 (Online) (doi:10.1007/s00170-006-0530-6)

2005

Aziz, Hayder, Gao, James, Maropoulos, Paul and Cheung, Wai M. (2005) Open standard, open source and peer-to-peer tools and methods for collaborative product development. Computers in Industry, 56 (3). pp. 260-271. ISSN 0166-3615 (doi:10.1016/j.compind.2004.12.002)

Gao, J. X., Baxter, D. I. and Sackett, P. J. (eds.) (2005) Proceedings of the 3rd International Conference on Manufacturng Research ICMR2005: Advances in Manufacturing Technology and Management. Cranfield University Press, Bedford, UK. ISBN 1-86194-122-6

2003

Gao, Jx, Aziz, Hayder, Maropoulos, Paul and Cheung, Denny (2003) Application of product data management technologies for enterprise integration. International Journal of Computer Integrated Manufacturing, 16 (7-8). pp. 491-500. ISSN 0951-192X (Print), 1362-3052 (Online) (doi:10.1080/0951192031000115813)

1990

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

This list was generated on Mon Sep 24 03:29:54 2018 BST.