Skip navigation

Items where Faculty / Department / Research Groups is "Department of Applied Engineering & Management"

Items where Faculty / Department / Research Groups is "Department of Applied Engineering & Management"

Up a level
Export as [feed] RSS
Group by: Date | Creators | Item Type | Uncontrolled Keywords | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | K | L | M | N | O | P | Q | R | S | T | W | Z
Number of items at this level: 167.

A

Andriopoulou, Foteini, Birkos, Konstantinos, Mantas, Georgios and Lymberopoulos, Dimitrios (2018) Software-defined networking for ubiquitous healthcare service delivery. In: Broadband Communications, Networks, and Systems. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering (LNICST) (263). Springer, Cham, Switzerland, pp. 95-104. ISBN 978-3030051945 ISSN 1867-8211 (doi:https://doi.org/10.1007/978-3-030-05195-2_10)

Aziz, Hayder, Gao, James ORCID: 0000-0001-5625-3654, Maropoulos, Paul and Cheung, Wai M. (2005) Open standard, open source and peer-to-peer tools and methods for collaborative product development. Computers in Industry, 56 (3). pp. 260-271. ISSN 0166-3615 (doi:https://doi.org/10.1016/j.compind.2004.12.002)

Aziz, Hayder, Li, Zhengxi and Gao, James ORCID: 0000-0001-5625-3654 (2008) Engineering design knowledge management in de-centralised virtual enterprises. Computer-Aided Design and Applications, 5 (6). pp. 787-800. ISSN 1686-4360 (Online) (doi:https://doi.org/10.3722/cadaps.2008.787-800)

B

Baxter, David and Gao, James ORCID: 0000-0001-5625-3654 (2006) Development of a process-based data driven engineering design knowledge re-use system. Computer-Aided Design and Applications, 3 (1-4). pp. 109-117. ISSN 1686-4360 (Online) (doi:https://doi.org/10.1080/16864360.2006.10738447)

Baxter, David, Gao, James ORCID: 0000-0001-5625-3654 and Li, Yingguang (2011) Innovative product development (Editorial). International Journal of Product Lifecycle Management, 5 (2/3/4). pp. 99-101. ISSN 1743-5110 (Print), 1743-5129 (Online)

Benoit, Hadrien, Ansart, Renaud, Neau, Herve, García-Triñanes, Pablo ORCID: 0000-0002-4993-2250, Flamant, Gilles and Simonin, Olivier (2018) 3D numerical simulation of upflow bubbling fluidized bed in opaque tube under high flux solar heating. AIChE Journal, 64 (11). pp. 3857-3867. ISSN 0001-1541 (Print), 1547-5905 (Online) (doi:https://doi.org/10.1002/aic.16218)

Bianchini, A., Farnish, R.J., Gambuti, M. and Saccani, C. (2016) Predictive model for corn flour discharge rates through an aerated hopper. Powder Technology, 298. pp. 84-89. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2016.05.009)

Bicaku, Ani, Maksuti, Silia, Palkovits-Rauter, Silke, Tauber, Markus, Matischek, Rainer, Schmittner, Christoph, Mantas, Georgios, Thron, Mario and Delsing, Jerker (2017) Towards trustworthy end-to-end communication in industry 4.0. In: 2017 IEEE 15th International Conference on Industrial Informatics (INDIN). IEEE, pp. 889-896. ISBN 978-1538608388 ISSN 2378-363X (Online) (doi:https://doi.org/10.1109/INDIN.2017.8104889)

Michael Bradley (2017) Apparatus comprising a microwave processing chamber. http://www.freepatentsonline.com/y2019/0127645.html.

Bradley, Michael S. A. (1990) Prediction of pressure losses in pneumatic conveying pipelines. PhD thesis, Thames Polytechnic.

Bradley, Mike and Wardle, J. P. (2019) Powder Flow in the AM Process: Understanding its impact and potential problems. In: IDTechEX, 10-11 April 2019, Estrel Convention Center, Berlin, Germany. (Unpublished)

Brown, David J., Campbell, Grant M., Belton, Daniel J., Cox, Phil, García-Trinanes, Pablo ORCID: 0000-0002-4993-2250 and Tizaoui, Chedly (2019) New chemical engineering provision: Quality in diversity. Education for Chemical Engineers, 28. pp. 30-44. ISSN 1749-7728 (doi:https://doi.org/10.1016/j.ece.2019.02.002)

C

Chakravarty, Somik, Fischer, Marc, García-Triñanes, Pablo ORCID: 0000-0002-4993-2250, Dalle, Morgane, Meunier, Laurent, Aguerre-Chariol, Olivier, Le Bihan, Olivier and Morgeneyer, Martin (2018) Long-term dust generation from silicon carbide powders. Process Safety and Environmental Protection, 116. pp. 115-125. ISSN 0957-5820 (doi:https://doi.org/10.1016/j.psep.2018.01.021)

Chakravarty, Somik, Fischer, Marc, García-Triñanes, Pablo ORCID: 0000-0002-4993-2250, Parker, David, Le Bihan, Olivier and Morgeneyer, Martin (2017) Study of the particle motion induced by a vortex shaker. Powder Technology, 322. pp. 54-64. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2017.08.026)

Ciurana, J., Ferrer, I. and Gao, J. X. ORCID: 0000-0001-5625-3654 (2006) Activity model and computer aided system for defining sheet metal process planning. Journal of Materials Processing Technology, 173 (2). pp. 213-222. ISSN 0924-0136 (doi:https://doi.org/10.1016/j.jmatprotec.2005.11.031)

Criado, Maria, Bernal, Susan A., García-Triñanes, Pablo ORCID: 0000-0002-4993-2250 and Provis, John L. (2017) Influence of slag composition on the stability of steel in alkali-activated cementitious materials. Journal of Materials Science. ISSN 0957-4530 (Print), 1573-4838 (Online) (doi:https://doi.org/10.1007/s10853-017-1919-3)

D

Dani, S., Harding, J. A., Case, K., Young, R. I. M., Cochrane, S., Gao, J. ORCID: 0000-0001-5625-3654 and Baxter, D. (2006) A methodology for best practice knowledge management. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 220 (10). pp. 1711-1728. ISSN 0954-4054 (Print), 2041-2975 (Online) (doi:https://doi.org/10.1243/09544054JEM651)

Diaz-Rodriguez, P., García-Triñanes, P. ORCID: 0000-0002-4993-2250, Echezarreta-López, M. M., Santoveña, A. and Landin, M. (2018) Mineralized alginate hydrogels using marine carbonates for bone tissue engineering applications. Carbohydrate Polymers, 195. pp. 235-242. ISSN 0144-8617 (Print), 1879-1344 (Online) (doi:https://doi.org/10.1016/j.carbpol.2018.04.101)

The University Of Greenwich (2017) STENT WO 2016116748 A1. WO 2016116748 A1.

de Ree, Marcus, Mantas, Georgios, Radwan, Ayman, Rodriguez, Jonathan and Otung, Ifiok (2018) Key management for secure network coding-enabled mobile small cells. In: Broadband Communications, Networks, and Systems. 9th International EAI Conference, Broadnets 2018, Faro, Portugal, September 19–20, 2018, Proceedings. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering . Springer, pp. 327-336. ISBN 978-3030051945 ISSN 1867-822X (Online) (doi:https://doi.org/10.1007/978-3-030-05195-2_32)

E

El Souri, Mohammed, Gao, James ORCID: 0000-0001-5625-3654 and Owodunni, Oladele (2017) An analysis of design for manufacturing requirements for managing aerospace manufacturing knowledge. In: Advances in Manufacfturing Technology XXXI, Proceedings of the 15th International Conference on Manufacturing Research, Incorporating the 32nd National Conference on Manufacturing Research, September 5-7, 2017, University of Greenwich, UK. Advances in Transdisciplinary Engineering Series, 6 . IOS Press, pp. 491-496. ISBN 978-1-61499-791-7 ISSN 2352-751X (Print), 2352-7528 (Online) (doi:https://doi.org/10.3233/978-1-61499-792-4-491)

El Souri, Mohammed, Gao, James ORCID: 0000-0001-5625-3654, Owodunni, Oladele, Martin, Nick and Simmonds, Clive (2016) An investigation into the management of design for manufacturing knowledge in an aerospace company. In: Advances in Manufacturing Technology XXX - Proceedings of the 14th International Conference on Manufacturing Research. Advances in Transdisciplinary Engineering . IOS, pp. 401-406. ISBN 978-1-61499-667-5 (doi:https://doi.org/10.3233/978-1-61499-668-2-401)

El Souri, Mohammed, Gao, James ORCID: 0000-0001-5625-3654, Owodunni, Oladele, Simmonds, Clive and Martin, Nick (2017) Improving design for manufacturing implementation in knowledge intensive collaborative environments - An analysis of organisational factors in aerospace manufacturing. In: 2017 IEEE Technology & Engineering Management Conference (TEMSCON). IEEE. ISBN 978-1-5090-1115-5 ISSN 978-1-5090-1114-8 (Online) (doi:https://doi.org/10.1109/TEMSCON.2017.7998417)

El Souri, Mohammed, Gao, James ORCID: 0000-0001-5625-3654, Owodunni, Oladele, Simmonds, Clive and Martin, Nick (2018) Improving product design through knowledge management in aerospace manufacturing lifecycle. In: Advances in Manufacfturing Technology XXXII. Advances in Transdisciplinary Engineering, 8 . IOS, pp. 197-202. ISBN 978-1-61499-901-0 ISSN 2352-751X (Print), 2352-7528 (Online) (doi:https://doi.org/10.3233/978-1-61499-902-7-197)

El Souri, Mohammed, Gao, James ORCID: 0000-0001-5625-3654, Owodunni, Oladele, Simmonds, Clive and Martin, Nick (2018) A structured approach to defect data management for improving DFM implementation in aerospace manufacturing. International Journal of Product Lifecycle Management, 10 (4). ISSN 1743-5110 (Print), 1743-5129 (Online) (doi:https://doi.org/10.1504/IJPLM.2017.090330)

El Souri, Mohammed, Gao, James ORCID: 0000-0001-5625-3654 and Simmonds, Clive (2019) Integrating manufacturing knowledge with design process to improve quality in aerospace industry. In: Procedia CIRP: 29th CIRP Design Conference 2019 08-10 May 2019, Povoa de Varzim, Portugal. Elsevier, pp. 374-379. ISSN 2212-8271 (doi:https://doi.org/10.1016/j.procir.2019.04.179)

Elshaer, Amr, Kaialy, Waseem, Akhtar, Noreen, Lyire, Affiong, Hussain, Tariq, Alany, Raid and Mohammed, Afzal (2015) A methodological evaluation and predictive in silico investigation into the multi-functionality of arginine in directly compressed tablets. European Journal of Pharmaceutics and Biopharmaceutics, 96. pp. 272-281. ISSN 0939-6411 (Print), 0939-6411 (Online) (doi:https://doi.org/10.1016/j.ejpb.2015.07.028)

Esfahani, Alireza, Mantas, Georgios, Barcelos, Mariana, Saghezchi, Firooz B., Sucasas, Victor, Bastos, Joaquim and Rodriguez, Jonathan (2018) Security framework for the semiconductor supply chain environment. In: Broadband Communications, Networks, and Systems. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering book series (LNICST) (263). Springer, Cham, Switzerland, pp. 159-168. ISBN 978-303005194-5 ISSN 1867-8211 (doi:https://doi.org/10.1007/978-3-030-05195-2_16)

Esfahani, Alireza, Mantas, Georgios, Matischek, Rainer, Saghezchi, Firooz B., Rodriguez, Jonathan, Bicaku, Ani, Maksuti, Silia, Tauber, Markus, Schmittner, Christoph and Bastos, Joaquim (2017) A lightweight authentication mechanism for M2M communications in industrial IoT environment. IEEE Internet of Things. pp. 1-8. ISSN 2327-4662 (doi:https://doi.org/10.1109/JIOT.2017.2737630)

Esfahani, Alireza, Mantas, Georgios, Monteiro, Valdemar, Ramantasy, Kostas, Datsikay, Eftychia and Rodriguez, Jonathan (2016) Analysis of a Homomorphic MAC-based scheme against tag pollution in RLNC-enabled wireless networks. In: 2015 IEEE 20th International Workshop on Computer Aided Modelling and Design of Communication Links and Networks (CAMAD). IEEE, pp. 156-160. ISBN 978-1467381864 (doi:https://doi.org/10.1109/CAMAD.2015.7390500)

Esfahani, Alireza, Mantas, Georgios and Rodriguez, Jonathan (2016) An efficient null space-based Homomorphic MAC scheme against tag pollution attacks in RLNC. IEEE Communications Letters, 20 (5). pp. 918-921. ISSN 1089-7798 (doi:https://doi.org/10.1109/LCOMM.2016.2547420)

Esfahani, Alireza, Mantas, Georgios, Rodriguez, Jonathan and Neves, José Carlos (2016) An efficient homomorphic MAC-based scheme against data and tag pollution attacks in network coding-enabled wireless networks. International Journal of Information Security, 16 (6). pp. 627-639. ISSN 1615-5262 (Print), 1615-5270 (Online) (doi:https://doi.org/10.1007/s10207-016-0351-z)

Esfahani, Alireza, Mantas, Georgios, Silva, Helio, Rodriguez, Jonathan and Neves, Jose Carlos (2016) An efficient MAC-based scheme against pollution attacks in XOR network coding-enabled WBANs for remote patient monitoring systems. EURASIP Journal on Wireless Communications and Networking, 2016 (113). pp. 1-10. ISSN 1687-1472 (Print), 1687-1499 (Online) (doi:https://doi.org/10.1186/s13638-016-0601-9)

Esfahani, Alireza, Yang, Du, Mantas, Georgios, Nascimento, Alberto and Rodriguez, Jonathan (2015) Dual-homomorphic message authentication code scheme for network coding-enabled wireless sensor networks. International Journal of Distributed Sensor Networks, 11 (7):510251. ISSN 1550-1329 (Print), 1550-1477 (Online) (doi:https://doi.org/10.1155/2015/510251)

Essop, Ismael A., Evans, Richard D., Wan, Shan, Giddaluru, Muni P., Gao, James X. ORCID: 0000-0001-5625-3654, Baudry, David, Mahdikhah, Sara and Messaadia, Mourad (2016) Investigation into current industrial practices relating to product lifecycle management in a multi-national manufacturing company. Computer-Aided Design and Applications, 13 (5). pp. 647-661. ISSN 1686-4360 (Online) (doi:https://doi.org/10.1080/16864360.2016.1150711)

Evans, Richard, Gao, Xiaoyu ORCID: 0000-0001-5625-3654, Martin, Nick and Simmonds, Clive (2015) Integrating social knowledge and collaboration tools into dispersed product development. International Journal of Advanced Corporate Learning, 8 (2). pp. 20-27. ISSN 1867-5565 (Online) (doi:https://doi.org/10.3991/ijac.v8i2.4548)

Evans, Richard D., Gao, James X. ORCID: 0000-0001-5625-3654, Mahdikhah, Sara, Messaadia, Mourad and Baudry, David (2016) A review of crowdsourcing literature related to the manufacturing industry. Journal of Advanced Management Science, 4 (3). pp. 224-231. ISSN 2168-0787 (doi:https://doi.org/10.12720/joams.4.3.224-231)

Evans, Richard David, Gao, James Xiaoyu ORCID: 0000-0001-5625-3654, Mahdikhah, Sara, Messaadia, Mourad and Baudry, David (2016) Crowdsourcing user-contributed solutions to aerospace product development issues through micro-blogging. Electronic Journal of Knowledge Management, 14 (2). pp. 126-136. ISSN 1479-4411 (Print), 1479-4411 (Online)

Evans, Richard David, Gao, James Xiaoyu ORCID: 0000-0001-5625-3654, Martin, Nick and Simmonds, Clive (2017) A new paradigm for virtual knowledge sharing in product development based on emergent social software platforms. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture:095440541769. ISSN 0954-4054 (Print), 2041-2975 (Online) (doi:https://doi.org/10.1177/0954405417699018)

F

Farnish, Richard, Beladi, Abdelhafid and Zigan, Stefan (2019) Investigation into the effects of cyclic particle loading onto filter media. In: ICBMH 2019. University of Newcastle, Australia.

Farnish, Richard, Belaidi, Hafid and Zigan, Stefan (2019) The effects of reverse jet pulse over-pressurisation on dust filter performance. In: ICBMH 2019. University of Newcastle, Australia.

Frystacki, Thomas H., Arokiam, Alan, Belaidi, Abdelhafid and Kirk, Paul L. (2015) Energy usage and temperature distribution in old mega factories. N/A. (Unpublished)

G

Gao, J. ORCID: 0000-0001-5625-3654 and Baxter, D. (2007) Enabling technologies and frameworks for new product development: a selection of papers from ICMR2005. International Journal of Production Research, 45 (7). pp. 1485-1487. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:https://doi.org/10.1080/00207540600942201)

Gao, J. X. ORCID: 0000-0001-5625-3654, Baxter, D. I. and Sackett, P. J. (eds.) (2005) Proceedings of the 3rd International Conference on Manufacturng Research ICMR2005: Advances in Manufacturing Technology and Management. Cranfield University Press, Bedford, UK. ISBN 1-86194-122-6

Gao, J. X. ORCID: 0000-0001-5625-3654 and Bradfield, D. J. (2007) A methodology to facilitate knowledge sharing in the new product development process. International Journal of Production Research, 45 (7). pp. 1489-1504. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:https://doi.org/10.1080/00207540600942227)

Gao, James ORCID: 0000-0001-5625-3654 and Bernard, Alain (2017) An overview of knowledge sharing in new product development. The International Journal of Advanced Manufacturing Technology. pp. 1-6. ISSN 0268-3768 (Print), 1433-3015 (Online) (doi:https://doi.org/10.1007/s00170-017-0140-5)

Gao, Jx ORCID: 0000-0001-5625-3654, Aziz, Hayder, Maropoulos, Paul and Cheung, Denny (2003) Application of product data management technologies for enterprise integration. International Journal of Computer Integrated Manufacturing, 16 (7-8). pp. 491-500. ISSN 0951-192X (Print), 1362-3052 (Online) (doi:https://doi.org/10.1080/0951192031000115813)

Gao, Xiaoyu ORCID: 0000-0001-5625-3654 (2017) A multi-pattern compensation method to ensure even temperature in composite materials during microwave curing process. Composites Part A: Applied Science and Manufacturing. ISSN 1359-835X (doi:https://doi.org/10.1016/j.compositesa.2017.12.17)

Gao, Xiaoyu ORCID: 0000-0001-5625-3654 (2018) An overview of manufacturing knowledge sharing in the product development process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232 (13). pp. 2253-2263. ISSN 0954-4054 (Print), 2041-2975 (Online) (doi:https://doi.org/10.1177/0954405418759375)

Gao, Xiaoyu ORCID: 0000-0001-5625-3654, El Souri, Mohammed and Keates, Simeon ORCID: 0000-0002-2826-672X (2017) Advances in Manufacturing Technology XXXI. Advances in Transdisciplinary Engineering, 6 . IOS Press, Amsterdam. ISBN 978-1-61499-791-7

Garcia Trinanes, Pablo ORCID: 0000-0002-4993-2250 (2016) Particle progress. The Chemical Engineer, 906 (7):3. pp. 38-40. ISSN 0302-0797

García-Triñanes, P. ORCID: 0000-0002-4993-2250, Seville, J.P.K., Ansart, R., Benoit, H., T.W., Leadbeater and D.J., Parker (2017) Particle motion and heat transfer in an upward-flowing dense particle suspension: application in solar receivers. Chemical Engineering Science, 177. pp. 313-322. ISSN 0009-2509 (Print), 1873-4405 (Online) (doi:https://doi.org/10.1016/j.ces.2017.11.041)

García-Triñanes, Pablo ORCID: 0000-0002-4993-2250, Luding, Stefan and Shi, Hao (2019) Tensile strength of cohesive powders. Advanced Powder Technology, 30 (12). pp. 2868-2880. ISSN 0921-8831 (Print), 1568-5527 (Online) (doi:https://doi.org/10.1016/j.apt.2019.08.017)

Garg, Vivek, Mallick, S. S., García-Trinanes, Pablo ORCID: 0000-0002-4993-2250 and Berry, Robert James (2018) An investigation into the flowability of fine powders used in pharmaceutical industries. Powder Technology, 336. pp. 375-382. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2018.06.014)

Giddaluru, Muni Prasad, Gao, James X. ORCID: 0000-0001-5625-3654 and Bhatti, Raj (2017) Integrating product knowledge with modular product structures in PLM. In: ICIDM2017: International Conference on Innovative Design and Manufacturing, July 17-19, 2017, Milan, Italy.

H

Hasan, Syed, Khan, S. and Shah, Satya (2018) Supply chain performance improvement within collaborative product development environment. International Journal of Business Performance and Supply Chain Modelling, 9 (4). pp. 261-279. ISSN 1758-9401 (Print), 1758-941X (Online) (doi:https://doi.org/10.1504/IJBPSCM.2017.10012512)

Hasan, Syed M. and Shah, Satya (2013) Use of process modelling in product development integration within manufacturing environment. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 1210-1214. ISSN 1022-6680 (Print), 1662-8985 (Online) (doi:https://doi.org/10.4028/www.scientific.net/AMR.816-817.1210)

Hasan, Syed M. and Shah, Satya (2013) An overview of change management within manufacturing environment. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 1205-1209. ISSN 1022-6680 (Print), 1662-8985 (Online) (doi:https://doi.org/10.4028/www.scientific.net/AMR.816-817.1205)

I

Ilic, Dusan, Williams, Kenneth, Farnish, Richard, Webb, Erin and Liu, Gary (2018) On the challenges facing the handling of solid biomass feedstocks. Biofuels, Bioproducts and Biorefining, 12 (2). pp. 187-202. ISSN 1932-104X (Print), 1932-1031 (Online) (doi:https://doi.org/10.1002/bbb.1851)

K

Karavatselou, Evy, Fengou, Maria-Anna, Mantas, Georgios and Lymberopoulos, Dimitrios (2018) Profile Management System in Ubiquitous Healthcare Cloud Computing Environment. In: Broadband Communications, Networks, and Systems. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering book series (LNICST) (263). Springer, Cham, Switzerland, pp. 105-114. ISBN 978-3030051945 ISSN 1867-8211 (doi:https://doi.org/10.1007/978-3-030-05195-2_11)

Kaur, Baldeep ORCID: 0000-0002-1762-3058 and Jana, Soumendu (2018) Cavity soliton molecules and all-optical push-broom effect. Journal of Lightwave Technology, 36 (12). pp. 2463-2470. ISSN 0733-8724 (Print), 1558-2213 (Online) (doi:https://doi.org/10.1109/JLT.2018.2815845)

Kaur, Baldeep ORCID: 0000-0002-1762-3058 and Jana, Soumendu (2017) Generation and dynamics of one-and two-dimensional cavity solitons in a vertical-cavity surface-emitting laser with a saturable absorber and frequency-selective feedback. Journal of the Optical Society of America B, 34 (7). pp. 1374-1385. ISSN 0740-3224 (Print), 1520-8540 (Online) (doi:https://doi.org/10.1364/JOSAB.34.001374)

Kaur, Baldeep ORCID: 0000-0002-1762-3058 and Jana, Soumendu (2016) A generic travelling wave solution in dissipative laser cavity. Pramana, 87 (4):53. ISSN 0304-4289 (Print), 0973-7111 (Online) (doi:https://doi.org/10.1007/s12043-016-1244-4)

Kaur, Baldeep ORCID: 0000-0002-1762-3058, Mittal, Anu, Jana, Soumendu, Mallick, S.S. and Wypych, Peter (2018) Stability and phase space analysis of fluidized-dense phase pneumatic transport system. Powder Technology, 330. pp. 190-200. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2018.02.023)

Kaur, Baldeep ORCID: 0000-0002-1762-3058, Mittal, Anu, Mallick, S.S., Pan, Renhu and Jana, Soumendu (2017) Numerical simulation of fluidized dense-phase pneumatic conveying of powders to develop improved model for solids friction factor. Particuology, 35. pp. 42-50. ISSN 1674-2001 (doi:https://doi.org/10.1016/j.partic.2016.11.006)

Kaur, Baldeep ORCID: 0000-0002-1762-3058, Mittal, Anu, Wypych, Peter, Mallick, S. S. and Jana, Soumendu (2016) On developing improved modelling and scale-up procedures for pneumatic conveying of fine powders. Powder Technology, 305. pp. 270-278. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2016.09.080)

Kofinas, Alexander, Romanova, Anna, Tsay, Han-Huei (Crystal) ORCID: 0000-0003-4959-0411 and Ahmed, Sajeel (2018) Coping Cycle and its importance when designing an Assessment: Reflections on the Learning Process. In: Learning, Teaching and Student Experience, 24 - 25 April 2018, Glasgow. (In Press)

Kotzur, Benjamin A., Bradley, Michael S.A., Berry, Robert J. and Farnish, Richard J. (2016) Breakage characteristics of granulated food products for prediction of attrition during lean-phase pneumatic conveying. International Journal of Food Engineering, 12 (9). ISSN 1556-3758 (Print), 2194-5764 (Online) (doi:https://doi.org/10.1515/ijfe-2016-0045)

L

Le, C. H. ORCID: 0000-0002-5168-2297, Ann Phan, P., Quoc Le, H., Long Vo, D., Tuan Mai, A., Tam Le, N. and Hoa Le, M. (2017) Innovative development of the inspired sinewave device to measure lung functions and inhomogeneity for diagnosis and evaluations of early lung diseases. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer Singapore, pp. 649-654. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:https://doi.org/10.1007/978-981-10-4361-1_111)

Le, C. H. ORCID: 0000-0002-5168-2297, Mai, A. T., Phan, P. A., Le, H. Q., Le, T. and Packianather, M.S. (2017) Detection and monitoring of cancers with biosensors in Vietnam. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer, Singapore, pp. 687-691. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:https://doi.org/10.1007/978-981-10-4361-1_118)

Le, C. H. ORCID: 0000-0002-5168-2297, Pham, B. M., Tran, D. T., Lam, K., Le, T. H., Vo, D. L., Mengistu, S. and Packianather, M. S. (2017) An integrated system and framework for development of medical applications and products based on medical imaging data. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer, Singapore, pp. 363-368. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:https://doi.org/10.1007/978-981-10-4361-1_61)

Le, Chi Hieu ORCID: 0000-0002-5168-2297, Kasmaji, Wisnu Wijaya, Packianather, Michael S., Mengistu, Samuel, Tran, Duc Tang and Chu, Anh My (2017) Customer driven mass-customisation and innovative product development with parametric design & generative modeling. In: Advances in Manufacturing Technology XXXI. Advances in Transdisciplinary Engineering, 6 . IOS Press, London, pp. 415-420. ISBN 978-1614997924 ISSN 2352-751X (Print), 2352-7528 (Online) (doi:https://doi.org/10.3233/978-1-61499-792-4-415)

Le, Chi Hieu ORCID: 0000-0002-5168-2297, Lee, Raymond, Luo, Jin, Phan, Phi Anh, Le, Trung and Le, Minh Hoa (2017) Assistive technologies for the older people: Physical activity monitoring and fall detection. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer Singapore, pp. 102-105. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:https://doi.org/10.1007/978-981-10-4361-1)

Le Tham, Phouc, Aghezzaf, El-Houssaine, Khatab, Abdelhakim and Le, Chi Hieu ORCID: 0000-0002-5168-2297 (2017) Integrated production and imperfect preventive maintenance planning: An effective MILP-based Relax-and-Fix/Fix-and-Optimize Method. In: Proceedings of the 6th International Conference on Operations Research and Enterprise Systems (ICORES 2017). SCITEPRESS – Science and Technology Publications, Lda, pp. 483-490. ISBN 978-989-758-218-9 (doi:https://doi.org/10.5220/0006285504830490)

Li, Nanya, Li, Yingguang, Jelonnek, John, Link, Guido and Gao, James ORCID: 0000-0001-5625-3654 (2017) A new process control method for microwave curing of carbon fibre reinforced composites in aerospace applications. Composites Part B: Engineering, 122. pp. 61-70. ISSN 1359-8368 (doi:https://doi.org/10.1016/j.compositesb.2017.04.009)

Li, Yingguang, Gao, James ORCID: 0000-0001-5625-3654 and Lee, Chen-Han (2015) Special issue on Computational Numerical Control Machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229 (7). pp. 1085-1086. ISSN 0954-4054 (Print), 2041-2975 (Online) (doi:https://doi.org/10.1177/0954405415592117)

Li, Yingguang, Liu, Changqing and Gao, James ORCID: 0000-0001-5625-3654 (2018) Spcial issue on Digital Enterprise Technologies in Manufacturing. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232 (13). pp. 2251-2252. ISSN 0954-4054 (Print), 2041-2975 (Online) (doi:https://doi.org/10.1177/0954405418774602)

Li, Yingguang, Liu, Changqing, Hua, Jiaqi, Gao, James ORCID: 0000-0001-5625-3654 and Maropoulos, Paul (2019) A novel method for accurately monitoring and predicting tool wear under varying cutting conditions based on meta-learning. CIRP Annals ‐ Manufacturing Technology, 68 (1). pp. 487-490. ISSN 0007-8506 (doi:https://doi.org/10.1016/j.cirp.2019.03.010)

Liu, Changqing, Li, Yingguang and Gao, James ORCID: 0000-0001-5625-3654 (2017) Special issue on digital enterprise technologies (editorial). International Journal of Advanced Manufacturing Technology. pp. 1-2. ISSN 0268-3768 (Print), 1433-3015 (Online) (doi:https://doi.org/10.1007/s00170-017-0595-4)

Liu, Xu, Li, Yingguang and Gao, James ORCID: 0000-0001-5625-3654 (2016) A multi-perspective dynamic feature concept in adaptive NC machining of complex freeform surfaces. The International Journal of Advanced Manufacturing Technology, 82 (5-8). pp. 1259-1268. ISSN 0268-3768 (Print), 1433-3015 (Online) (doi:https://doi.org/10.1007/s00170-015-7456-9)

Lulbadda Waduge, L.L., Zigan, S., Stone, L.E., Belaidi, A. and García-Triñanes, P. ORCID: 0000-0002-4993-2250 (2016) Predicting concentrations of fine particles in enclosed vessels using a camera based system and CFD simulations. Process Safety and Environmental Protection, 105. pp. 262-273. ISSN 0957-5820 (Print), 1744-3598 (Online) (doi:https://doi.org/10.1016/j.psep.2016.11.013)

M

Macchini, R., Bradley, M.S.A. and Deng, T. ORCID: 0000-0003-4117-4317 (2013) Influence of particle size, density, particle concentration on bend erosive wear in pneumatic conveyors. Wear, 303 (1-2). pp. 21-29. ISSN 0043-1648 (doi:https://doi.org/10.1016/j.wear.2013.02.014)

Maniruzzaman, M., Nair, A., Scoutaris, N., Bradley, Michael S.A., Snowden, M.J. ORCID: 0000-0002-1087-2692 and Douroumis, D. ORCID: 0000-0002-3782-0091 (2015) One-step continuous extrusion process for the manufacturing of solid dispersions. International Journal of Pharmaceutics Special Issue on "Continuous Manufacturing and Process Analytical Tools”, 496 (1). pp. 42-51. ISSN 0378-5173 (Print), 1873-3476 (Online) (doi:https://doi.org/10.1016/j.ijpharm.2015.09.048)

Messaadia, Mourad, Baudry, David, Louis, Anne, Mahdikhah, Sara, Evans, Richard, Gao, James ORCID: 0000-0001-5625-3654, Paquet, Thierry, Sahnoun, M'hammed and Mazari, Belhacène (2016) PLM adoption in SMEs context. Computer-Aided Design and Applications, 13 (5). pp. 618-627. ISSN 1686-4360 (Online) (doi:https://doi.org/10.1080/16864360.2016.1150706)

Mountney, S. L., Gao, J. X. ORCID: 0000-0001-5625-3654 and Wiseall, S. (2007) A knowledge system to support manufacturing knowledge during preliminary design. International Journal of Production Research, 45 (7). pp. 1521-1537. ISSN 0020-7543 (Print), 1366-588X (Online) (doi:https://doi.org/10.1080/00207540600942300)

N

Naghi Ganji, E., Shah, S. and Coutroubis, A. (2018) Sustainable supply and demand chain integration within global manufacturing industries. In: Proceedings of the 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE, pp. 1807-1811. ISBN 978-1-5386-0949-1 ISSN 2157-362X (Online) (doi:https://doi.org/10.1109/IEEM.2017.8290203)

Naghi Ganji, Elmira, Shah, Satya and Coutroubis, Alec (2017) Bridging new product development with sustainable supply chain management practices. International Journal of Economics and Management Systems, 2. pp. 178-186. ISSN 2367-8925

Naghi Ganji, Elmira, Shah, Satya and Coutroubis, Alec (2017) Case study analysis of sustainable supply chain redesign linking with new product development. WSEAS Transactions on Business and Economics, 14:22. pp. 193-205. ISSN 1109-9526 (Print), 2224-2899 (Online)

Naghi Ganji, Elmira, Shah, Satya and Coutroubis, Alec (2018) DCM 4.0: Integration of industry 4.0 and demand chain in global manufacturing. In: 2018 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC). IEEE. ISBN 978-1538614709 (doi:https://doi.org/10.1109/ICE.2018.8436383)

Naghi Ganji, Elmira, Shah, Satya and Coutroubis, Alec (2018) Mass customisation and technology functions: Enhancing market responsiveness. In: 2018 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC). IEEE. ISBN 978-1538614709 (doi:https://doi.org/10.1109/ICE.2018.8436313)

Naghi Ganji, Elmira, Shah, Satya and Coutroubis, Alec (2017) An evaluation of demand focused chain contribution to industrial sustainability. In: Advances in Manufacturing Technology XXXI: Proceedings of the 15th International Conference on Manufacturing Research. Advances in Transdisciplinary Engineering (6). IOS Press, pp. 359-364. ISBN 978-1-61499-791-7 ISSN 2352-751X (Print), 2352-7528 (Online) (doi:https://doi.org/10.3233/978-1-61499-792-4-359)

Naghi Ganji, Elmira, Shah, Satya and Coutroubis, Alec (2017) The role of sustainable new product development in demand driven chains. In: Proceedings of the 2017 International Conference on Industrial Engineering, Management Science and Application (ICIMSA). IEEE, pp. 1-5. ISBN 978-1-5090-6336-9 ISSN 978-1-5090-6335-2 (Online) (doi:https://doi.org/10.1109/ICIMSA.2017.7985611)

Nguyen, T. A., Nguyen, Tien V., Tran, D. T., Nguyen, Toan V., Le, C. H. ORCID: 0000-0002-5168-2297, Nguyen, V. B. and Le, H. Q. (2017) Microfluidic impedance biosensors for monitoring a single and multiple cancer cells in anticancer drug treatments. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer Singapore, pp. 681-685. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:https://doi.org/10.1007/978-981-10-4361-1_117)

Nguyen, V. B., Le, C. H. ORCID: 0000-0002-5168-2297, Zhang, Z., Lee, R., Nguyen, T. A. and Packianather, M. S. (2017) Recent advances in experimental testing and computational modelling for characterisation of mechanical properties of biomaterials and biological cells. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer, Singapore, pp. 655-660. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:https://doi.org/10.1007/978-981-10-4361-1_112)

O

Ojo, O. O., Shah, S. and Coutroubis, A. D. (2018) An overview of sustainable practices in food processing supply chain environments. In: Proceedings of the 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE, pp. 1792-1796. ISBN 978-1-5386-0949-1 ISSN 2157-362X (Online) (doi:https://doi.org/10.1109/IEEM.2017.8290200)

Ojo, Olumide, Shah, Satya and Coutroubis, Alec (2017) Study of energy savings and sustainable practices adoption in telecommunication services. WSEAS Transactions on Communications, 16:19. pp. 159-168. ISSN 1109-2742 (Print), 2224-2864 (Online)

Owodunni, O. O. and Pinder, D. (2016) Sustainability improvement in milling operation through improved tool design and optimized process parameters: An industrial case study. In: Procedia CIRP. Elsevier, pp. 498-503. ISSN 2212-8271 (doi:https://doi.org/10.1016/j.procir.2016.01.115)

P

Packianather, M. S., Le, C. H. ORCID: 0000-0002-5168-2297, Pham, Dinh Trung and Le, Hoai Quoc (2017) Advanced micro and nano manufacturing technologies used in medical domain. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer, Singapore, pp. 637-642. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:https://doi.org/10.1007/978-981-10-4361-1_109)

Parsamehr, Reza, Mantas, Georgios, Radwan, Ayman, Rodriguez, Jonathan and Martínez, José-Fernán (2018) Security threats in network coding-enabled mobile small cells. In: Broadband Communications, Networks, and Systems. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering book series (LNICST) (263). Springer, Cham, Switzerland, pp. 337-346. ISBN 978-3030-051945 ISSN 1867-8211 (doi:https://doi.org/10.1007/978-3-030-05195-2_33)

Pham, B. M., Le, C. H. ORCID: 0000-0002-5168-2297, Do, N. T., Vo, D. L., Le, T., Lee, R., Packianather, M. S. and Mengistu, S. (2017) Cost-effective solutions and tools for medical image processing and design of personalised cranioplasty implants. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer, Singapore, pp. 397-402. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:https://doi.org/10.1007/978-981-10-4361-1_67)

Q

Qureshi, Athar (2015) Interference diagnosis in wireless systems by using NI USRP. International Journal of Simulation: Systems, Science and Technology, 16 (6). 10.1-10.10. ISSN 1473-8031 (Print), 1473-804x (Online) (doi:https://doi.org/10.5013/IJSSST.a.16.06.10)

R

Raza, M., Hoa Le, M., Aslam, N., Le, C. Hieu ORCID: 0000-0002-5168-2297, Tam Le, N. and Ly Le, T. (2017) Telehealth technology: Potentials, challenges and research directions for developing countries. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer, Singapore, pp. 523-528. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:https://doi.org/10.1007/978-981-10-4361-1_89)

Ribeiro, José, Mantas, Georgios, Saghezchi, Firooz B., Rodriguez, Jonathan, Shepherd, Simon J. and Abd-Alhameed, Raed A. (2018) Towards an autonomous host-based intrusion detection system for android mobile devices. In: Broadband Communications, Networks, and Systems. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering (LNICST) (263). Springer, Cham, Switzerland, pp. 139-148. ISBN 978-3030-051945 ISSN 1867-8211 (doi:https://doi.org/10.1007/978-3-030-05195-2_14)

Ribeiro, Kandice Suane Barros, Farnish, Richard J. and Coelho, Reginaldo Teixeira (2019) Evaluation of the Restricted Air Entry on the Discharge Rate from Silos. In: 25th ABCM International Congress of Mechanical Engineering, 20-25 October 2019, Uberlandia, MG, Brazil.

Romanova, A. and Coutroubis, A. D. (2017) HRC method to measure concrete sewer pipe corrosion rate induced by sulphuric acid environment: temperature and pH. In: 4th IWA/IAHR International Conference on Urban Drainage (ICUD), 10-15 September 2017, Prague, Czech Republic.

Romanova, Anna (2018) Barriers in the Peer Review Process: overcoming the distress using a Critical Incidents Approach. In: SRHE International Conference on Research into Higher Education. Taylor & Francis. (In Press)

Romanova, Anna (2016) Concrete corrosion induced by sulfuric acid. In: Sheffield research seminar, Wednesday, 2 March 2016, University of Sheffield.

Romanova, Anna (2015) Corrosion induced by sulfuric acid – method of concrete material properties upgrade? In: Faculty of Engineering and Science, Research Symposium, 16 September 2015, Pembroke Wardroom, Medway School of Pharmacy. (Unpublished)

Romanova, Anna (2016) Hands-on delivery of group business project. In: SHIFT 2017: Annual Conference of Learning, Teaching & Assessment, Friday 6 January, 2017, Greenwich Maritime Campus, Queen Anne Court. (Submitted)

Romanova, Anna (2018) Overcoming Liminality in Peer Review. In: Medway Festival of Learning & Teaching, Thursday 13 September, 2018, Medway Campus - Pilkington Building.

Romanova, Anna (2018) Personal Belbin types and MBTI preferences combination in group work assuring success. In: SHIFT 2018, Friday 5 January, 2018, Greenwich Maritime Campus, Queen Anne Court.

Romanova, Anna and Coutroubis, Alec D. (2016) 'Pro' and 'hands-on' approach in business project delivery. In: The First Medway Engineering Conference on Systems: Efficiency, Sustainability and Modelling in Chatham, 6 June 2016, Pilkington Building, University of Greenwich, Central Avenue, Chatham, Medway.

Romanova, Anna, Horoshenkov, Kirill and Hurrell, Alistair (2018) An application of a parametric transducer to measure acoustic absorption of a living green wall. Applied Acoustics, 145. pp. 89-97. ISSN 0003-682X (doi:https://doi.org/10.1016/j.apacoust.2018.09.020)

Romanova, Anna and Horoshenkov, Kirill V. (2019) In-situ acoustic absorption of a living green wall. In: 47th International Congress and Exposition on Noise Control Engineering (INTERNOISE 2018): Impact of Noise Control Engineering. Curran Associates. ISBN 978-1510873032

Romanova, Anna and Horoshenkov, Kirill V. (2016) An application of a parametric transducer to measure the acoustical properties of a living green wall. The Journal of the Acoustical Society of America, 140 (4). ISSN 0001-4966 (Print), 1520-8524 (Online) (doi:https://doi.org/10.1121/1.4971053)

Romanova, Anna and Salah, Ghofran (2018) Social study on public awareness of the Living Green Wall health benefits. In: ABC: Activating Biophilic Cities, 4-5 September 2018, University of Greenwich. (Unpublished)

Romanova, Anna V., Horoshenkov, Kirill V. and Krynkin, Anton (2018) Dynamically rough boundary scattering effect on a propagating continuous acoustical wave in a circular pipe with flow. Sensors, 18:1098. ISSN 1424-8220 (Online) (doi:https://doi.org/10.3390/s18041098)

S

Saghezchi, Firooz B., Mantas, Georgios, Ribeiro, José, Al-Rawi, Mohammed, Mumtaz, Shahid and Rodriguez, Jonathan (2017) Towards a secure network architecture for smart grids in 5G era. In: 2017 13th International Wireless Communications and Mobile Computing Conference (IWCMC). IEEE, pp. 121-126. ISBN 978-1509043736 ISSN 2376-6506 (Online) (doi:https://doi.org/10.1109/IWCMC.2017.7986273)

Saghezchi, Firooz B., Mantas, Georgios, Ribeiro, José, Esfahani, Alireza, Alizadeh, Hassan, Bastos, Joaquim and Rodriguez, Jonathan (2018) Machine Learning to Automate Network Segregation for Enhanced Security in Industry 4.0. In: Broadband Communications, Networks, and Systems. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering book series (LNICST) (263). Springer, Cham, Switzerland, pp. 149-158. ISBN 978-3030051945 ISSN 1867-8211 (doi:https://doi.org/10.1007/978-3-030-05195-2_15)

Salah, Ghofran M. J. A. and Romanova, Anna (2017) Coconut fibre as an alternative growth compound for Living Green Walls. In: The Second Medway Engineering Conference on Systems Efficiency, Sustainability and Modelling, Tuesday, 6th June 2017, University of Greenwich, Chatham Maritime ME4 4TB.

Salehi, Hamid, Berry, Robert, Deng, Tong ORCID: 0000-0003-4117-4317, Larsson, Sylvia H., Farnish, Richard and Bradley, Mike (2019) Development and application of a novel cake strength tester. Powder Technology, 350. pp. 36-42. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2019.03.024)

Salehi, Hamid, Berry, Robert, Farnish, Richard and Bradley, Mike (2019) Temperature and time consolidation effect on the bulk flow properties and arching tendency of a detergent powder. Chemical Engineering & Technology, 43 (1). pp. 150-156. ISSN 0930-7516 (Print), 1521-4125 (Online) (doi:https://doi.org/10.1002/ceat.201900092)

Salehi, Hamid, Berry, Robert, Farnish, Richard and Bradley, Mike (2019) A new uniaxial compression tester: development and application. Chemical Engineering Transactions, 74. pp. 463-468. ISSN 2283-9216 (doi:https://doi.org/10.3303/CET1974078)

Saunders, Timothy (2017) A knowledge management framework to support the automotive systems engineering lifecycle. PhD thesis, University of Greenwich.

Shah, S., Bardon Soriano, C. and Coutroubis, A. D. (2018) Is Big Data for everyone? The challenges of Big Data adoption in SMEs. In: Proceedings of the 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE, pp. 803-807. ISBN 978-1-5386-0947-7 ISSN 2157-362X (Online) (doi:https://doi.org/10.1109/IEEM.2017.8290002)

Shah, S., Long, M. and Naghi Ganji, E. (2018) Achieving strategic growth in microenterprises through information technology: UK micro enterprise case study. In: Proceedings of the 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE, pp. 1133-1137. ISBN 978-1-5386-0949-1 ISSN 2157-362X (Online) (doi:https://doi.org/10.1109/IEEM.2017.8290069)

Shah, Satya, Al-Badri, Sara and Hasan, Syed (2015) Use of business competitions to enhance student employability in Higher Education. In: Recent Advances in Educational Technologies: Proceedings of the 2015 International Conference on Education and Modern Educational Technologies (EMET 2015). Educational Technologies Series, 18 (18). WSEAS, Greece, pp. 140-147. ISBN 978-1-61804-322-1 ISSN 2227-4618

Shah, Satya and Hasan, Syed (2015) Influence of IT on micro enterprises to pursue strategic growth. In: Recent Advances in Computer Science: Proceedings of the 19th International Conference on Computers (CSCC'15). Recent Advances in Computer Engineering Series, 32 (32). WSEAS, Greece, pp. 488-496. ISBN 978-1-61804-320-7 ISSN 1790-5109

Shah, Satya and Hasan, Syed (2016) Procurement practices in project based manufacturing environments. In: MATEC Web of Conferences. Systems, 76 (02007). Matec, Greece. ISSN 2261-236X (Online) (doi:https://doi.org/10.1051/matecconf/20167602007)

Shah, Satya, Mabbott, Owen, Naghi Ganji, Elmira and Bate, Jordan (2018) Innovation and I4.0 management in connected and autonomous automotive manufacturing. In: 2018 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC). IEEE. ISBN 978-1538614709 (doi:https://doi.org/10.1109/ICE.2018.8436262)

Shah, Satya, Mattiuzza, Stefano, Naghi Ganji, Elmira and Coutroubis, Alec (2017) Contribution of additive manufacturing systems to supply chain. In: Proceedings of the 2017 International Conference on Industrial Engineering, Management Science and Application (ICIMSA). IEEE, pp. 1-5. ISBN 978-1-5090-6336-9 ISSN 978-1-5090-6335-2 (Online) (doi:https://doi.org/10.1109/ICIMSA.2017.7985586)

Shah, Satya and Mattiuzza, Steffano (2018) Adoption of additive manufacturing approaches: The case of manufacturing SMEs. In: 2018 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC). IEEE. ISBN 978-1538614709 (doi:https://doi.org/10.1109/ICE.2018.8436257)

Shah, Satya and Naghi Ganji, Elmira (2017) Lean production and supply chain innovation in baked foods supplier to improve performance. British Food Journal. ISSN 0007-070X (doi:https://doi.org/10.1108/BFJ-03-2017-0122)

Shah, Satya, Naghi Ganji, Elmira and Coutroubis, Alec (2017) Development of NPD portfolio management in project based environments. In: Advances in Manufacturing Technology XXXI: Proceedings of the 15th International Conference on Manufacturing Research. Advances in Transdisciplinary Engineering (6). IOS Press, pp. 409-414. ISBN 978-1-61499-791-7 ISSN 2352-751X (Print), 2352-7528 (Online) (doi:https://doi.org/10.3233/978-1-61499-792-4-409)

Shah, Satya, Naghi Ganji, Elmira and Coutroubis, Alec (2017) Lean production practices to enhance organisational performance. In: MATEC Web of Conferences 125: 21st International Conference on Circuits, Systems, Communications and Computers (CSCC 2017). EDP Sciences, pp. 1-7. ISSN 2261-236X (Online) (doi:https://doi.org/10.1051/matecconf/201712502003)

Shah, Satya, Naghi Ganji, Elmira and Coutroubis, Alexander (2017) Evaluation of sustainable practices within project management methods. In: MATEC Web of Conferences: The 21st International Conference on Circuits, Systems, Communications and Computers (CSCC 2017) (CSCC 2017). EDP Sciences, pp. 1-7. ISSN 2261-236X (Online) (doi:https://doi.org/10.1051/matecconf/201712502002)

Shah, Satya, Naghi Ganji, Elmira and Hasan, Syed (2016) Environmental management systems and sustainability in SMEs. In: 20th International Conference on Circuits, Systems, Communications and Computers (CSCC 2016). Systems, 76 (02006). Matec Web of Conferences, Greece. ISSN 2261-236X (Online) (doi:https://doi.org/10.1051/matecconf/20167602006)

Shah, Satya, Naghi Ganji, Elmira and Hasan, Syed (2016) An analysis of environmental management and sustainability in SMEs. WSEAS Transactions on Environment and Development, 12:a745815-054. pp. 353-365. ISSN 1790-5079 (Print), 2224-3496 (Online)

Shah, Satya, Olajide Ojo, Olumide, Naghi Ganji, Elmira and Kadry Idris Abdellah, Ahmed (2017) Impact of sustainable energy savings in Nigerian telecoms industry. In: International Journal of Renewable Energy Sources. IARAS (International Association of Research and Science), pp. 27-35. ISSN 2367-9123

Shah, Satya and Wiese, Jan (2018) Reality of big data adoption in supply chain for sustainable manufacturing SMEs. In: 2018 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC). IEEE. ISBN 978-1538614709 (doi:https://doi.org/10.1109/ICE.2018.8436343)

Shang, Zhigen, Deng, Tong ORCID: 0000-0003-4117-4317, He, Jianqiang and Duan, Xiaohui (2018) A novel model for hourly PM2.5 concentration prediction based on CART and EELM. Science of The Total Environment, 651 (2). pp. 3043-3052. ISSN 0048-9697 (Print), 1879-1026 (Online) (doi:https://doi.org/10.1016/j.scitotenv.2018.10.193)

Sharma, R. and Gao, J. X. ORCID: 0000-0001-5625-3654 (2006) A knowledge-based manufacturing and cost evaluation system for product design/re-design. The International Journal of Advanced Manufacturing Technology, 33 (9-10). pp. 856-865. ISSN 0268-3768 (Print), 1433-3015 (Online) (doi:https://doi.org/10.1007/s00170-006-0530-6)

Simons, T.A.H., Bensmann, S., Zigan, Stefan, Feise, H.J., Zetzener, H. and Kwade, A. (2015) Characterization of granular mixing in a helical ribbon blade blender. Powder Technology, 293. pp. 15-25. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2015.11.041)

Sparrow, R. D, Adekunle, A. A. and Berry, R. J. (2017) LEOPARD lightweight encryption operation permutation addition rotation and diffusion. In: IEEE 10th International Conferences on Signal Processing and Communication Systems. IEEE, pp. 1-5. ISBN 978-1-5090-0941-1 (doi:https://doi.org/10.1109/ICSPCS.2016.7843322)

Sparrow, R. D, Adekunle, A. A., Berry, R. J. and Farnish, R. J. (2016) A novel block cipher design paradigm for secured communication. In: 2016 Annual IEEE 10th International Systems Conference (SysCon). IEEE, Florida, United States of America, pp. 1-6. ISBN 978-1-4673-9519-9 (doi:https://doi.org/10.1109/SYSCON.2016.7490659)

Sparrow, R. D., Adekunle, A. A., Berry, R. J. and Farnish, R. J. (2016) The affect of two cryptographic constructs on QoS and QoE for unmanned control vehicles. In: 2015 9th International Conference on Next Generation Mobile Applications, Services and Technologies. IEEE, pp. 265-269. ISBN 978-1-4799-8660-6 (doi:https://doi.org/10.1109/NGMAST.2015.46)

Sucasas, Victor, Mantas, Georgios, Althunibat, Saud, Oliveira, Leonardo, Antonopoulos, Angelos, Otung, Ifiok and Rodriguez, Jonathan (2018) A privacy-enhanced OAuth 2.0 based protocol for smart city mobile applications. Computers & Security, 74. pp. 258-274. ISSN 0167-4048 (doi:https://doi.org/10.1016/j.cose.2018.01.014)

Sucasas, Victor, Mantas, Georgios, Bastos, Joaquim, Damiao, Francisco and Rodriguez, Jonathan (2019) A signature scheme with unlinkable-yet-accountable pseudonymity for privacy-preserving crowdsensing. IEEE Transactions on Mobile Computing, 18. p. 1. ISSN 1536-1233 (doi:https://doi.org/10.1109/TMC.2019.2901463)

Sucasas, Victor, Mantas, Georgios, Radwan, Ayman and Rodriguez, Jonathan (2017) A Lightweight Privacy-Preserving OAuth2-Based Protocol for Smart City Mobile Apps. In: 2016 IEEE Globecom Workshops (GC Wkshps). IEEE, pp. 1-6. ISBN 978-1509024834 (doi:https://doi.org/10.1109/GLOCOMW.2016.7848816)

Sucasas, Victor, Mantas, Georgios, Radwan, Ayman and Rodriguez, Jonathan (2016) An OAuth2-based protocol with strong user privacy preservation for smart city mobile e-Health apps. In: 2016 IEEE International Conference on Communications (ICC). IEEE, pp. 1-6. ISBN 978-1-4799-6665-3 ISSN 1938-1883 (Online) (doi:https://doi.org/10.1109/ICC.2016.7511598)

Sucasas, Victor, Mantas, Georgios and Rodriguez, Jonathan (2016) Security challenges for cloud radio access networks. In: Huq, Kazi Mohammed Saidul and Rodriguez, Jonathan, (eds.) Backhauling/Fronthauling for Future Wireless Systems. Wiley-Blackwell, pp. 195-209. ISBN 978-1119170341 (doi:https://doi.org/10.1002/9781119170402.ch9)

Sucasas, Victor, Mantas, Georgios, Saghezchi, Firooz B., Radwan, Ayman and Rodriguez, Jonathan (2016) An autonomous privacy-preserving authentication scheme for intelligent transportation systems. Computers & Security, 60. pp. 193-205. ISSN 0167-4048 (doi:https://doi.org/10.1016/j.cose.2016.04.006)

T

Ton, Bram T., Farnish, Richard J. and Zigan, Stefan (2015) Resolving lateral segregation effects of static blenders. In: IV International Conference on Particle-Based Methods (PARTICLES 2015). International Centre for Numerical Methods in Engineering (CIMNE), Barcelona, Spain, pp. 714-721. ISBN 978-8494424472

Tran, Q., Le, T., Le, C. H. ORCID: 0000-0002-5168-2297 and Vo, T. V. (2017) Electrophysiological modeling in generalized epilepsy using surface EEG and anatomical brain structures. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam (BME6). IFMBE Proceedings, 63 . Springer Nature Singapore Pte Ltd, pp. 699-704. ISBN 978-981-10-4360-4 ISSN 1680-0737 (doi:https://doi.org/10.1007/978-981-10-4361-1_120)

W

Wan, Shan, Li, Dongbo and Gao, James ORCID: 0000-0001-5625-3654 (2016) Exploring the advantages of content management systems for managing engineering knowledge in product-service systems. Procedia CIRP, 56. pp. 446-450. ISSN 2212-8271 (doi:https://doi.org/10.1016/j.procir.2016.10.087)

Wan, Shan, Li, Dongbo, Gao, James ORCID: 0000-0001-5625-3654 and Li, Jing (2019) A knowledge based machine tool maintenance planning system Using case-based reasoning techniques. Robotics and Computer-Integrated Manufacturing, 58. pp. 80-96. ISSN 0736-5845 (doi:https://doi.org/10.1016/j.rcim.2019.01.012)

Wan, Shan, Li, Dongbo, Gao, James ORCID: 0000-0001-5625-3654, Roy, Rajkumar and He, Fei (2016) A collaborative machine tool maintenance planning system based on content management technologies. The International Journal of Advanced Manufacturing Technology, 94 (5-8). pp. 1639-1653. ISSN 0268-3768 (Print), 1433-3015 (Online) (doi:https://doi.org/10.1007/s00170-016-9829-0)

Wan, Shan, Li, Dongbo, Gao, Xiaoyu ORCID: 0000-0001-5625-3654, Roy, Rajkumar and Tong, Yifei (2016) Process and knowledge management in a collaborative maintenance planning system for high value machine tools. Computers in Industry, 84. pp. 14-24. ISSN 0166-3615 (doi:https://doi.org/10.1016/j.compind.2016.11.002)

Wilson, Joel, Arokiam, Alan, Belaidi, Hafid and Ladbrook, John (2016) A simple energy usage toolkit from manufacturing simulation data. Journal of Cleaner Production, 122. pp. 266-276. ISSN 0959-6526 (Print), 1879-1786 (Online) (doi:https://doi.org/10.1016/j.jclepro.2015.11.071)

Z

Zammit, Joseph Paul, Gao, James ORCID: 0000-0001-5625-3654 and Evans, Richard (2016) Capturing and sharing product development knowledge using storytelling and video sharing. Procedia CIRP, 56. pp. 440-445. ISSN 2212-8271 (doi:https://doi.org/10.1016/j.procir.2016.10.081)

Zammit, Joseph Paul, Gao, James ORCID: 0000-0001-5625-3654 and Evans, Richard (2016) Development of a knowledge sharing framework for improving the testing processes in global product development. International Journal of Product Lifecycle Management, 9 (1). p. 1. ISSN 1743-5110 (Print), 1743-5129 (Online) (doi:https://doi.org/10.1504/IJPLM.2016.078853)

Zammit, Joseph Paul, Gao, James ORCID: 0000-0001-5625-3654 and Evans, Richard (2017) The challenges of adopting PLM tools involving diversified technologies in the automotive supply chain. In: IFIP 14th International Conference on Product Lifecycle Management, 9-12 July 2017, Seville, Spain. (Unpublished)

Zammit, Joseph Paul, Gao, James ORCID: 0000-0001-5625-3654, Evans, Richard and Maropoulos, Paul (2017) A knowledge capturing and sharing framework for improving the testing processes in global product development using storytelling and video sharing. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ISSN 0954-4054 (Print), 2041-2975 (Online) (doi:https://doi.org/10.1177/0954405417694062)

Zhang, Guangdong, Huang, Xiang, Li, Shuanggao and Deng, Tong ORCID: 0000-0003-4117-4317 (2019) Optimized design method for profile extrusion die based on NURBS modeling. Fibers and Polymers, 20 (8). pp. 1733-1741. ISSN 1229-9197 (Print), 1875-0052 (Online) (doi:https://doi.org/10.1007/s12221-019-1168-y)

Zhao, Zhiwei, Li, Yingguang, Liu, Changqing and Gao, James ORCID: 0000-0001-5625-3654 (2019) On-line part deformation prediction based on deep learning. Journal of Intelligent Manufacturing, 31 (3). pp. 561-574. ISSN 0956-5515 (Print), 1572-8145 (Online) (doi:https://doi.org/10.1007/s10845-019-01465-0)

Zigan, Stefan, Hettiaratchi, Kaushika and Milledge, John J. ORCID: 0000-0003-0252-6711 (2017) Evaluate the blend quality of powders using a simplified mixing law. In: Reliable Flow of Particulate Solid V (RELPOWFLO V), 13-15 June 2017, Skien, Norway.

Zigan, Stefan and Lulbadda Waduge, L.L. (2015) Analysis of airborne fines in cylindrical biomass storage silos. In: IV International Conference on Particle-Based Methods (PARTICLES 2015). International Centre for Numerical Methods in Engineering (CIMNE), Barcelona, Spain, pp. 900-908. ISBN 978-8494424472

This list was generated on Fri Sep 18 02:06:13 2020 UTC.